Enhanced mesenchymal stem cell proliferation through complexation of selenium/titanium nanocomposites

Optimizing controlled degradation, bioactivity, and mechanical behavior in sol-gel synthesized aluminum titanate biomaterials

Orthopaedic applications require materials that balance mechanical strength, biocompatibility, and controlled degradation, particularly for bone regeneration and load-bearing purposes. This study investigates the effects of varying weight percentages of Al2O3and TiO2(25:75, 50:50, and 75:25) on the characteristics of Al2TiO5biomaterials synthesized via the sol-gel method. Structural and chemical characterizations, including XRD and FTIR, confirmed the successful synthesis of phase-pure Al2TiO5, highlighting functional groups such as Al-O and Ti-O. Among the tested compositions, the 50:50 ratio exhibited the strongest antibacterial efficacy againstS. aureusandE. coli, comparable to a commercial antibiotic, while also promoting hydroxyapatite (HAp) deposition in simulated body fluid (SBF). Additionally, cytotoxicity assessments using the L929 murine fibroblast cell line revealed that the 50:50 composition had the lowest toxicity. All formulations demonstrated controlled degradation, minimizing pH fluctuations and enhancing bioactivation and biocompatibility. Zeta potential analysis indicated that the 50:50 composition exhibited the most negative values over time, suggesting strong surface interactions with SBF and a favorable environment for HAp nucleation. Furthermore, the compressive strength of all formulations (71-74 MPa) was sufficient for load-bearing applications. These findings suggest that optimizing the 50:50 weight ratio enhances bioactivity, mechanical stability, and biocompatibility, making it a promising candidate for orthopedic and bone tissue engineering applications.

PLGA and PDMS-based in situ forming implants loaded with rosuvastatin and copper-selenium nanoparticles: a promising dual-effect formulation with augmented antimicrobial and cytotoxic activity in breast cancer cells

Breast cancer is among the most prevalent tumors worldwide. In this study, in-situ forming implants (ISFIs) containing rosuvastatin calcium were prepared using three types of poly (D, L-lactic-co-glycolic acid) (PLGA), namely, PLGA 50/50 with ester terminal and PLGA 75/25 with ester or acid terminal. Additionally, polydimethylsiloxane (PDMS) was added in concentrations of 0, 10, 20, and 30% w/v to accelerate matrix formation. The prepared ISFIs were characterized for their rheological behaviors, rate of matrix formation, and in-vitro drug release. All the prepared formulations revealed a Newtonian flow with a matrix formation rate between 0.017 and 0.059 mm/min. Generally, increasing the concentration of PDMS increased the matrix formation rate. The prepared implants' release efficiency values ranged between 46.39 and 89.75%. The ISFI containing PLGA 50/50 with 30% PDMS was selected for further testing, as it has the highest matrix formation rate and a promising release efficiency value. Copper-selenium nanoparticles were prepared with two different particle sizes (560 and 383 nm for CS1 and CS2, respectively) and loaded into the selected formulation to enhance its anticancer activity. The unloaded and loaded implants with rosuvastatin and copper-selenium nanoparticles were evaluated for their antibacterial activity, against Gram-positive and negative microorganisms, and anticancer efficacy, against MCF-7 and MDA-MB-231 cell lines. The results confirmed the potency of rosuvastatin calcium against cancer cells and the synergistic effect when loaded with smaller particle sizes of copper-selenium nanoparticles. This formulation holds a considerable potential for efficient breast cancer therapy.

Calcium silicate biocomposites: effects of selenium oxide on the physico-mechanical features and theirin-vitrobiological assessments

Bone tissue regenerative material serves as a prospective recovery candidate with self-adaptable biological properties of bio-activation, degradability, compatibility, and antimicrobial efficacy instead of metallic implants. Such materials are highly expensive due to chemical reagents and complex synthesis procedures, making them unaffordable for patients with financial constraints. This research produced an efficient bone tissue regenerative material using inexpensive naturally occurring source materials, including silica sand and limestone. The extracted SiO2and CaO particles (75:25 wt%) were subjected to hydrothermal synthesis (water treatment instead of chemical solvents) to produce the CaSiO3biomaterial (code: S). Selenium oxide was doped with calcium silicate at 3, 5, and 10 wt.% to enhance its properties, yielding biocomposite materials (i.e. S3, S5, and S10). The physico-mechanical properties of these materials were investigated with x-ray diffraction, Fourier transform infrared, FESEM-EDS, and micro-universal testing machine. The results revealed that the synthesized biocomposites have a crystalline wollastonite phase with a porously fused rough surface. From structural parametric calculations, we found that the biocomposites have reduced particle size and enhanced surface area due to the influence of selenium oxide. The biocomposite S10, having high SeO2content, attained the maximum compressive strength of 75.2 MPa.In-vitrostudies of bioactivity, biodegradability, biocompatibility, and antibacterial activity were performed. At 7 and 14 d of bioactivity, the synthesized biocomposites are capable of dissolving their ions into simulated body fluid (SBF) solution to precipitate hydroxyapatite and a required Ca/P ratio of 1.69 was achieved by S3. A comparative analysis has been performed on the degradation activity in Tris-HCl and the consequent pH changes during SBF treatment. The bio-analysis revealed that the biocomposite S3 shows enhanced bioactivity through a controlled degradation rate and secured cell viability of 88% at a concentration of 100 μg ml-1. It also offers significant bacterial inhibition potency againstE.coliandS.aureusbacteria.

Development of Ag NPs/allantoin loaded PCL/GEL electrospun nanofibers for topical wound treatment

In the present study, the allantoin and silver nanoparticle (Ag NPs) loaded poly caprolactone/gelatin (PCL/GEL) nanofibers produced using electrospinning technique and their cyto-compatibility and wound healing activity were evaluated in vitro and in vivo. The SEM imaging revealed diameters of 278.8 ± 10 and 240.6 ± 12 nm for PCL/GEL/Ag NPs and PCL/GEL/Ag NPs/allantoin scaffolds. The Ag NPs entrapment into scaffolds was evaluated by FTIR analysis and EDX mapping. Both scaffolds containing Ag NPs and Ag NPs/allantoin exhibited valuable wound healing activity in Wistar rat animal model. The profound granulation tissue formation, high collagen deposition in coordination with low level of edema and inflammatory cells in Ag NPs/allantoin loaded scaffolds resulted in complete and mature re-epithelialization in giving the healing score (12 out of 12) equal to positive control group to the wounds treated with these scaffolds. It was concluded that the Ag NPs/allantoin loaded scaffolds regarding to their good antibacterial activity and excellent wound healing activity could be introduced as new effective wound dressing materials.

Biocompatibility and interaction of porous alumina-zirconia scaffolds with adipose-derived mesenchymal stem cells for bone tissue regeneration

Replacement of bone defects with bone graft or implant is an important therapeutic strategy that has been used in routine practice. However, the identification of biomaterials that can mimic natural bone properties and serve as bone substitutes remains a major challenge. In this context, alumina-zirconia (Al2O3/ZrO2) nanocomposites emerge as potential alternatives for biomedical applications, owing to their high mechanical strength, wear resistance, and biocompatibility. In this sense, in this study, we prepared porous Al2O3/ZrO2 nanocomposites (scaffolds) using the gelcasting method and biomimetically coated them with calcium phosphate (CaP). We evaluated the biocompatibility of the scaffolds using the quantitative MTT cytotoxicity test in L929 cells. Moreover, rabbit adipose-derived mesenchymal stem cells (rADMSCs) were seeded with CaP-containing and CaP-free porous samples to evaluate cell proliferation and cell-scaffold interaction in vitro. Our results showed that the Al2O3/ZrO2 scaffolds were non-cytotoxic, and there were no significant differences between CaP-containing and CaP-free scaffolds in terms of cell growth and adhesion. In contrast, when co-cultured with rADMSCs, the scaffolds enhanced cell proliferation and cell adhesion. The rADMSCs adhered and migrated through the pores of the scaffold and anchored to different poles with differentiated elongated structures. These results suggest osteogenic differentiation of rADMSCs in response to mechanical loading of Al2O3/ZrO2 scaffolds. Therefore, we conclude that Al2O3/ZrO2 scaffolds have demonstrated significant implications in bone tissue engineering and are valuable biomaterials for bone replacement.

Sodium selenite preserves rBM-MSCs' stemness, differentiation potential, and immunophenotype and protects them against oxidative stress via activation of the Nrf2 signaling pathway

BACKGROUND

The physiological level of reactive oxygen species (ROS) is necessary for many cellular functions. However, during the in-vitro manipulations, cells face a high level of ROS, leading to reduced cell quality. Preventing this abnormal ROS level is a challenging task. Hence, here we evaluated the effect of sodium selenite supplementation on the antioxidant potential, stemness capacity, and differentiation of rat-derived Bone Marrow MSCs (rBM-MSCs) and planned to check our hypothesis on the molecular pathways and networks linked to sodium selenite's antioxidant properties.

METHODS

MTT assay was used to assess the rBM-MSCs cells' viability following sodium selenite supplementation (concentrations of: 0.001, 0.01, 0.1, 1, 10 µM). The expression level of OCT-4, NANOG, and SIRT1 was explored using qPCR. The adipocyte differentiation capacity of MSCs was checked after Sodium Selenite treatment. The DCFH-DA assay was used to determine intracellular ROS levels. Sodium selenite-related expression of HIF-1α, GPX, SOD, TrxR, p-AKT, Nrf2, and p38 markers was determined using western blot. Significant findings were investigated by the String tool to picture the probable molecular network.

RESULTS

Media supplemented with 0.1 µM sodium selenite helped to preserve rBM-MSCs multipotency and keep their surface markers presentation; this also reduced the ROS level and improved the rBM-MSCs' antioxidant and stemness capacity. We observed enhanced viability and reduced senescence for rBM-MSCs. Moreover, sodium selenite helped in rBM-MSCs cytoprotection by regulating the expression of HIF-1 of AKT, Nrf2, SOD, GPX, and TrxR markers.

CONCLUSIONS

We showed that sodium selenite could help protect MSCs during in-vitro manipulations, probably via the Nrf2 pathway.

Theranostic applications of selenium nanomedicines against lung cancer

The incidence and mortality rates of lung cancer are among the highest in the world. Traditional treatment methods include surgery, chemotherapy, and radiotherapy. Although rapid progress has been achieved in the past decade, treatment limitations remain. It is therefore imperative to identify safer and more effective therapeutic methods, and research is currently being conducted to identify more efficient and less harmful drugs. In recent years, the discovery of antitumor drugs based on the essential trace element selenium (Se) has provided good prospects for lung cancer treatments. In particular, compared to inorganic Se (Inorg-Se) and organic Se (Org-Se), Se nanomedicine (Se nanoparticles; SeNPs) shows much higher bioavailability and antioxidant activity and lower toxicity. SeNPs can also be used as a drug delivery carrier to better regulate protein and DNA biosynthesis and protein kinase C activity, thus playing a role in inhibiting cancer cell proliferation. SeNPs can also effectively activate antigen-presenting cells to stimulate cell immunity, exert regulatory effects on innate and regulatory immunity, and enhance lung cancer immunotherapy. This review summarizes the application of Se-based species and materials in lung cancer diagnosis, including fluorescence, MR, CT, photoacoustic imaging and other diagnostic methods, as well as treatments, including direct killing, radiosensitization, chemotherapeutic sensitization, photothermodynamics, and enhanced immunotherapy. In addition, the application prospects and challenges of Se-based drugs in lung cancer are examined, as well as their forecasted future clinical applications and sustainable development.

The promising role of hypoxia-resistant insulin-producing cells in ameliorating diabetes mellitus in vivo

AIM

This study aimed to evaluate the efficacy of hypoxia-persistent insulin-producing cells (IPCs) against diabetes in vivo.

MATERIALS & METHODS

Mesenchymal stem cells (MSCs) differentiation into IPCs in the presence of Se/Ti (III) or CeO2 nanomaterials. IPCs were subjected to hypoxia and hypoxia genes were analyzed. PKH-26-labeled IPCs were infused in diabetic rats to evaluate their anti-diabetic potential.

RESULTS

MSCs were differentiated into functional IPCs. IPCs exhibited overexpression of anti-apoptotic genes and down-expression of hypoxia and apoptotic genes. IPCs implantation elicited glucose depletion and elevated insulin, HK and G6PD levels. They provoked VEGF and PDX-1 upregulation and HIF-1α and Caspase-3 down-regulation. IPCs transplantation ameliorated the destabilization of pancreatic tissue architecture.

CONCLUSION

The chosen nanomaterials were impressive in generating hypoxia-resistant IPCs that could be an inspirational strategy for curing diabetes.

Recovering metal(loids) and rare earth elements from closed landfill sites without excavation: Leachate recirculation opportunities and challenges

Metal (loids) and Rare Earth Elements (REE) ('metals') are used in a wide range of products, and therefore, the improvement of expectations for everyday comforts with demand continues to grow. Metal-bearing wastes are a secondary source of raw material that can meet this demand by providing a previously unconsidered low impact supply source. Total annual leachate production is 1,056,716 m³. Therefore, landfill leachate emerges as a significant potential resource as it contains high concentrations of metals. However, realising a profitable return on investment for leachate processing is a challenge due to relatively low recovery rates of approximately 0.02% of total heavy metals in a landfill being leached out in 30 years. Variation within the multi-element value and the effect of other chemicals in these complex mixtures. There is a need to better understand the mechanisms and potential applicability of extraction methods for optimising metals recovery from leachate. This paper addresses this need by providing a systematic review of the critical factors and environmental conditions that influence the behaviour of metals within the landfilled waste. The paper provides a synthesis of how the factors and conditions may affect leachate recirculation efficiency for recovery in the context of a range of opportunities and challenges facing circular economy practitioners. To approach feasibility metal recovery economically from landfill leachate without energy-intensive and environmentally destructive, future research actions need to be initiated in lab-based and later on semi-pilot to pilot studies, which the review can help achieve the challenges.

The Impact of Trace Elements on Osteoarthritis

Osteoarthritis (OA) is a progressive degenerative disease characterized by cartilage degradation, synovial inflammation, subchondral sclerosis and osteophyte formation. It has a multifactorial etiology with potential contributions from heredity, endocrine function, abnormal mechanical load and nutrition. Of particular considerations are trace element status. Several trace elements, such as boron and magnesium are essential for normal development of the bone and joint in human. While cadmium correlates with the severity of OA. The present review focuses on the roles of trace elements (boron, cadmium, copper, iron, magnesium, manganese, selenium, zinc) in OA and explores the mechanisms by which they act.

Investigating the Intermediate Water Feature of Hydrated Titanium Containing Bioactive Glass

Intermediate water (IW) in hydrated bioactive glasses remains uninvestigated. We obtained titanium (Ti)-containing bioactive glasses (BGTs) (Ti at 5%, 7.5% and 10% of the glass system) using the sol-gel technique. Their thermal, physicochemical, and morphological properties, before and after Ti-doping, were analysed using DTA, XRD, FTIR, TEM, and SEM accessorised with EDAX, and size distribution and zeta potential surface charges were determined using a NanoZetasizer. The IW in hydrated BGTs was investigated by cooling and heating runs of DSC measurements. Moreover, the mode of death in an osteosarcoma cell line (MG63) was evaluated at different times of exposure to BGT discs. Ti doping had no remarkable effect on the thermal, physicochemical, and morphological properties of BGTs. However, the morphology, size, and charges of BGT nano-powders were slightly changed after inclusion of Ti compared with those of BGT0; for example, the particle size increased with increasing Ti content (from 4-5 to 7-28 nm). The IW content was enhanced in the presence of Ti. The mode of cell death revealed the effect of IW content on the proliferation of cells exposed to BGTs. These findings should help improve the biocompatibility of inorganic biomaterials.

Synergistic effects of adipose-derived mesenchymal stem cells and selenium nanoparticles on streptozotocin-induced memory impairment in the rat

AIMS

Memory impairment is determined to be the most well-known symptom of Alzheimer's disease (AD). Although cell therapy seems is an efficient therapeutic strategy to attenuate the AD-related memory impairment, transplanted cells have a short lifespan and do not survive long term in the recipient animals. Herein, we investigated whether the combination therapy of Selenium nanoparticles (SeNPs) and stem cells attenuates the neurotoxicity in an AD animal model.

MATERIAL AND METHODS

The adipose-derived mesenchymal stem cells (AMSCs) were transplanted in the AD model. In addition to cell injections, the animals also received oral administration of SeNPs (0.4 mg/kg) for one month. Recognition memory, cell survival, and BDNF concentration were assessed using the novel object recognition task, immunofluorescence, and ELISA methods.

KEY FINDINGS

Our results showed that the combined therapy was more effective in increasing the discrimination index than the administering SeNPs or AMSCs alone. Moreover, SeNPs and stem cells together had the greatest effects in reducing the deposition of Aβ and increasing the concentration of BDNF. Ultimately, the survival and proliferation of transplanted cells were more in the group that received stem cells besides SeNPs.

SIGNIFICANCE

Taken together, it seems that the transplantation of MSCs combined with SeNPs could achieve better results in the neuroprotection in the AD model than a conventional treatment of SeNPs or stem cells alone.

Bioactive anti-oxidative polycaprolactone/gelatin electrospun nanofibers containing selenium nanoparticles/vitamin E for wound dressing applications

In this study, polycaprolactone/gelatin (PCL/GEL) electrospun nanofibers containing biogenic selenium nanoparticles (Se NPs) and Se NPs/vitamin E (VE) with average diameters of 397.8 nm and 279.5 nm, respectively (as determined by SEM inspection) were prepared and their effect on wound healing was evaluated using in-vivo studies. The energy dispersive X-ray (EDX) mapping, TEM micrograph, and FTIR spectra of the prepared nanofibers strongly demonstrated well entrapment of Se NPs and VE into scaffolds. An amount of 57% Se NPs and 43% VE were gradually released from PCL/GEL/Se NPs/VE scaffold after 4 days immersion in PBS solution (pH 7.4). The both PCL/GEL/Se NPs and PCL/GEL/Se NPs/VE scaffolds supported 3T3 cell proliferation and attachment as confirmed by MTT assay and SEM imaging. Complete re-epithelialization, low level of edema and inflammatory cells in coordination with high level of oriented collagens demonstrated the wound healing activity of PCL/GEL/Se NPs/VE. Besides, significant antioxidant efficacy of PCL/GEL/Se NPs and PCL/GEL/Se NPs/VE scaffolds was demonstrated according to GSH and MDA assays. To sum up, the prepared PCL/GEL/Se NPs/VE scaffold in the present study represented suitable healing effect on animal model which candidate it for further studies.

M-keratin nano-materials create a mineralized micro-circumstance to promote proliferation and differentiation of DPSCs

As traditional root canal obturation leads to the loss of the biological activity of the tooth, it is necessary to develop a material that promotes the regeneration of dental tissue. However, this remains a challenging task. Our study aims to construct a mineralized material to support the proliferation and differentiation of dental pulp stem cells (DPSCs), and to explore a new strategy for the treatment of pulp tissue necrosis. Mineralized keratin (M-keratin), defined as keratin that has been mineralized in simulated body fluid, was first harvested to construct the root canal filling material. Characterizations indicated that new substances or components were formed on the surface of keratin particles after mineralization, and the morphology of the keratin was changed. M-keratin promoted the growth, proliferation, and differentiation of DPSCs. After cultivation with M-keratin, DPSCs exhibited more extracellular matrix proteins interacting with the culture interface, the number of these cells increased significantly, and the 3-[4,5-dimethylthiazol-2-yl-]-2,5-diphenyltetrazolium bromide values of cells in the experimental group also increased. Meanwhile, signs that the DPSCs began to differentiate into odontoblasts were observed or detected by alizarin red S staining, ELISA, RNA-Seq, and western blot. We hope that this study will contribute to the development of a new material that promotes the regeneration of dental tissue as well as providing new ideas and strategies for the treatment of dental pulp disease.

Dual-function membranes based on alginate/methyl cellulose composite for control drug release and proliferation enhancement of fibroblast cells

Membranes based on natural polymers are highly promising therapies for skin damaged sites as they can mimic its biological microstructure to support the fibroblasts cells survival and proliferation. In addition, these membranes could be loaded with active molecules that help in skin regeneration and eliminate the potential bacterial infection. This research aims to formulate novel medicated membranes for controlled release and cytocompatibility elevation of fibroblast cells for engineering of soft tissue. Pre-formulation researches have been conducted for membranes of sodium alginate (Alg)/methyl cellulose (MC) that used loaded with undoped, Bi doped and Bi, Cu co-doped SrTiO₃ using solvent casting technique. In addition, another group of these membranes were loaded with DOXycycline antibiotic (DOX) as model drug as well as for eliminating the potential bacterial infections. The prepared membranes were evaluated by XRD, SEM-EDX, FTIR, Zetasizer, and swelling behaviour was also tested. Profiles of the released drug were determined using phosphate-buffered saline (PBS) (pH 7.4) at 37 °C for 30 days. The investigation of the cytocompatibility and proliferation of fibroblast cells with the prepared membranes were conducted. The XRD, FTIR and SEM data recognised the possible interaction that takes place among Alg and MC, through presence of hydrogen bonds. Existence of the nano-particles within the membrane polymer matrix enhanced the membrane stability and enhanced the drug release rate (from 20 to 45%). Medication release mechanism elucidated that DOX was released from all the fabricated membranes through the relaxation of polymer matrix that takes place after swelling. The filler type and/or dopant type possess no remarkable influence on the cytotoxicity of the membranes against the investigated cells when compared to their individual influence on the same cells. Cells attachments results have revealed an impressive effect for DOX-loaded membranes on the cells affinity and growth. These membranes are recommended for treatments of skin infections.

The role of selenium metabolism and selenoproteins in cartilage homeostasis and arthropathies

As an essential nutrient and trace element, selenium is required for living organisms and its beneficial roles in human health have been well recognized. The role of selenium is mainly played through selenoproteins synthesized by the selenium metabolic system. Selenoproteins have a wide range of cellular functions including regulation of selenium transport, thyroid hormones, immunity, and redox homeostasis. Selenium deficiency contributes to various diseases, such as cardiovascular disease, cancer, liver disease, and arthropathy—Kashin–Beck disease (KBD) and osteoarthritis (OA). A skeletal developmental disorder, KBD has been reported in low-selenium areas of China, North Korea, and the Siberian region of Russia, and can be alleviated by selenium supplementation. OA, the most common form of arthritis, is a degenerative disease caused by an imbalance in matrix metabolism and is characterized by cartilage destruction. Oxidative stress serves as a major cause of the initiation of OA pathogenesis. Selenium deficiency and dysregulation of selenoproteins are associated with impairments to redox homeostasis in cartilage. We review the recently explored roles of selenium metabolism and selenoproteins in cartilage with an emphasis on two arthropathies, KBD and OA. Moreover, we discuss the potential of therapeutic strategies targeting the biological functions of selenium and selenoproteins for OA treatment.

Selenium, a micronutrient found in brazil nuts, shiitake mushrooms, and most meats, may aid in treating joint diseases, including the most common form of arthritis, osteoarthritis (OA). In addition to thyroid hormone metabolism and immunity, selenium is important in antioxidant defense. Oxidative damage can destroy cartilage and harm joints, and selenium deficiency is implicated in several joint diseases. Jin-Hong Kim at Seoul National University in South Korea and co-workers reviewed selenium metabolism, focusing on OA and and Kashin–Beck disease, a skeletal development disorder prevalent in selenium-deficient areas of northeast Asia. They report that selenium-containing proteins protect cells against oxidative damage and that selenium is crucial to cartilage production. Further investigation of selenium metabolism may point the way to new treatments for OA and other joint diseases.

Novel Hybrid Composites Based on PVA/SeTiO2 Nanoparticles and Natural Hydroxyapatite for Orthopedic Applications: Correlations between Structural, Morphological and Biocompatibility Properties

The properties of poly(vinyl alcohol) (PVA)-based composites recommend this material as a good candidate for the replacement of damaged cartilage, subchondral bone, meniscus, humeral joint and other orthopedic applications. The manufacturing process can be manipulated to generate the desired biomechanical properties. However, the main shortcomings of PVA hydrogels are related to poor strength and bioactivity. To overcome this situation, reinforcing elements are added to the PVA matrix. The aim of our work was to develop and characterize a novel composition based on PVA reinforced with Se-doped TiO2 nanoparticles and natural hydroxyapatite (HA), for possible orthopedic applications. The PVA/Se-doped TiO2 composites with and without HA were structurally investigated by FTIR and XRD, in order to confirm the incorporation of the inorganic phase in the polymeric structure, and by SEM and XRF, to evidence the ultrastructural details and dispersion of nanoparticles in the PVA matrix. Both the mechanical and structural properties of the composites demonstrated a synergic reinforcing effect of HA and Se-doped TiO2 nanoparticles. Moreover, the tailorable properties of the composites were proved by the viability and differentiation potential of the bone marrow mesenchymal stem cells (BMMSC) to osteogenic, chondrogenic and adipogenic lineages. The novel hybrid PVA composites show suitable structural, mechanical and biological features to be considered as a promising biomaterial for articular cartilage and subchondral bone repair.

Selenium Overcomes Doxorubicin Resistance in Their Nano-platforms Against Breast and Colon Cancers

Colon cancer in men and breast cancer in women are regarded as major health burdens, accounting for majority of cancer diagnoses globally. Doxorubicin (DOX) resistance in breast and colon cancers represents the main reason of unsuccessful therapy. The rationale of this study is to explore whether selenium nanoparticles (nano-Se) can overcome this resistance obstacle of DOX nanoparticles (nano-DOX) in these cancerous cells. Nano-Se and nano-DOX were manufactured and characterized using electron microscopy and Malvern ZetaSizer, applied separately or in the form of combinatorial regimen against human breast cancer cells (MCF7 and MDA-MB-231) and human colorectal cancer cells (HCT 116 and Caco-2). Cytotoxicity, early/late apoptosis, necrosis, cellular zinc, glucose uptake, and redox status were assessed after applying different nano-treatments versus their free counterparts. Nano-DOX induces cytotoxicity in MCF7 and Caco-2 more than MDA-MB-231 and HCT 116 cancerous cells. In addition, nano-DOX plus nano-Se diminish MCF7 and Caco-2 chemoresistance higher than MDA-MB-231 and HCT 116 cancerous cells. Moreover, Se and DOX nano-platforms inhibit glucose uptake. Furthermore, nano-DOX increases nitric oxide (NO) and malondialdehyde (MDA) in cancer cells' media, while nano-DOX combination with nano-Se rebalances the redox status with zinc augmentation. We reported that Caco-2 cancer cells are more sensitive than HCT 116 cancer cells to nano-DOX and nano-Se. Nano-DOX plus nano-Se induces cytotoxicity-mediated late apoptosis in Caco-2 more than HCT 116 cell lines. This de novo strategy could have great power to overcome the problem of DOX resistance during colon cancer therapy.

Emerging Anticancer Potentials of Selenium on Osteosarcoma

Selenium is a trace element essential to humans and forms complexes with proteins, which exert physiological functions in the body. In vitro studies suggested that selenium possesses anticancer effects and may be effective against osteosarcoma. This review aims to summarise current evidence on the anticancer activity of inorganic and organic selenium on osteosarcoma. Cellular studies revealed that inorganic and organic selenium shows cytotoxicity, anti-proliferative and pro-apoptotic effects on various osteosarcoma cell lines. These actions may be mediated by oxidative stress induced by selenium compounds, leading to the activation of p53, proapoptotic proteins and caspases. Inorganic selenium is selective towards cancer cells, but can cause non-selective cell death at a high dose. This condition challenges the controlled release of selenium from biomaterials. Selenium treatment in animals inoculated with osteosarcoma reduced the tumour size, but did not eliminate the incidence of osteosarcoma. Only one study investigated the relationship between selenium and osteosarcoma in humans, but the results were inconclusive. In summary, although selenium may exert anticancer properties on osteosarcoma in experimental model systems, its effects in humans require further investigation.

Nanoparticle- and Nanoporous-Membrane-Mediated Delivery of Therapeutics

Pharmaceutical particulates and membranes possess promising prospects for delivering drugs and bioactive molecules with the potential to improve drug delivery strategies like sustained and controlled release. For example, inorganic-based nanoparticles such as silica-, titanium-, zirconia-, calcium-, and carbon-based nanomaterials with dimensions smaller than 100 nm have been extensively developed for biomedical applications. Furthermore, inorganic nanoparticles possess magnetic, optical, and electrical properties, which make them suitable for various therapeutic applications including targeting, diagnosis, and drug delivery. Their properties may also be tuned by controlling different parameters, e.g., particle size, shape, surface functionalization, and interactions among them. In a similar fashion, membranes have several functions which are useful in sensing, sorting, imaging, separating, and releasing bioactive or drug molecules. Engineered membranes have been developed for their usage in controlled drug delivery devices. The latest advancement in the technology is therefore made possible to regulate the physico-chemical properties of the membrane pores, which enables the control of drug delivery. The current review aims to highlight the role of both pharmaceutical particulates and membranes over the last fifteen years based on their preparation method, size, shape, surface functionalization, and drug delivery potential.