Organic and elemental carbon associated to PM10 and PM 2.5 at urban sites of northern Greece

Pollution characteristics, source apportionment, and health risk assessment of PM10 and PM2.5 in rooftop and kerbside environment of Lanzhou, NW China

To investigate air pollution in the kerbside environment and its associated human health risks, a study was conducted in Lanzhou during December 2018, as well as in April, June, and September 2019. The research aimed to characterize the composition of PM10 and PM2.5, including elements, ions, and carbonaceous components, at both rooftop and kerbside locations. Additionally, source apportionment and health risk assessment were conducted. The results showed that the average mass concentrations of PM10 on the rooftop were 176.01 ± 83.23 μg/m3, and for PM2.5, it was 94.07 ± 64.89 μg/m3. The PM10 and PM2.5 levels at the kerbside are 2.21 times and 1.79 times, respectively, greater than those on the rooftop. Moreover, the concentrations of elements, ions, and carbonaceous components in kerbside PM were higher than those at the rooftop location. Chemical mass closure analysis identified various sources, including organic matter, mineral dust, secondary ions, other ions, elements, and other components. In comparison to rooftop particulate matter (PM), mineral dust makes a more substantial contribution to kerbside PM. Secondary ions show an opposite trend, making a greater contribution to rooftop PM. The contribution of organic components within PM of the same particle size remains relatively consistent. The outcome of the health risk assessment indicates that Co, Cd, and As in PM within the kerbside and rooftop environments do not pose a notable carcinogenic risk. However, Al and Mn do present specific non-carcinogenic risks, particularly in the kerbside environment. Furthermore, children experience elevated non-carcinogenic risk compared to adults. These findings can serve as a scientific foundation for formulating policies within the local health department.

Organophosphate esters in the urban atmosphere of Thessaloniki city, Greece

The occurrence of organophosphate esters (OPEs) in the atmosphere of the urban area of Thessaloniki city, Greece was studied. OPEs were determined in particulate matter (PM2.5) and precipitation during the period 2020-2021. ∑OPEs in rainwater ranged from 520 to 4719 ng L-11 (mean: 1662 ng L-1) with tris (2-butoxyethyl) phosphate (TBOEP) and tris (1-chloro-2-propyl) phosphate (TClPP) being the most abundant compounds. TBOEP and TClPP as well as triphenylphosphine oxide (TPPO) and tris (chloroethyl) phosphate (TCEP) were the dominant OPEs in PM2.5. Concentrations of ∑OPEs in PM2.5ranged from 2.82 to 13.3 ng m-3 (mean: 5.93 ng m-3). Wet deposition fluxes of OPEs were estimated and air mass back trajectories were used to elucidate possible source profiles. An overall low health risk for local population via inhalation of OPEs was revealed.

Appraising the characteristics of particulate matter from leather tanning micro-environments, their respirational risks, and dysfunctions amid exposed working cohorts

Leather tanneries are known for chemical laden work environments and pulmonic complaints among workers. This study presents an analysis of tannery micro-environments emphasizing on size-based variation in composition of particulate matter and consequent respiratory dysfunctions. Qualitative (FTIR, SEM-EDX) and quantitative assessment (elemental composition, carbon forms) of PM10 and 2.5 has been employed. For lung function evaluation of workforce, spirometry with ATS proprieties was used. The peak concentrations of both PM10 and 2.5 have been found at PU, FU, and B&S. The LTCR for only Cr is high for both PM2.5 and PM10. HQ was high for Al, Cr, and Mn for both PM sizes. The maximum organic and secondary organic carbon in PM10 was found at FU and in PM2.5 at PU. The varied PM composition included carbohydrate (B&S, WMO), ether (S&S, P&S) and hydroxyl (B&S, S&S, P&S), proteins, polyenes, vinyl groups (S&S, P&S, FU), alcohols (PU and FU), and aldehyde present at PU. These results were armored by high organic and total carbon concentrations for the same sites. Therefore, PM are classified into biogenic (carbonaceous: microbial and animal remains) from PU and WMO, incidental (industrial, mixt physico-chemical character) from PU, FU, WMO, B&S and P&S, and geogenic (crustal mineral dust) from RHT, B&S, PU, and P&S. Furthermore, increase in metal concentrations in PM10 (Cr, Mn, Co, Ni, V, As, Be, Ba, and Cd) and PM2.5 (As, Pb) while TC, OC, and SOC in PM2.5 caused depreciation overall lung function. The exposure to biogenic and incidental PM nature are key cause of pulmonic dysfunction.

Assessing Lifetime Cancer Risk Associated with Population Exposure to PM-Bound PAHs and Carcinogenic Metals in Three Mid-Latitude Metropolitan Cities

Lifetime cancer risk characterization of ambient PM-bound carcinogenic metals and polycyclic aromatic hydrocarbons (PAHs) were examined in the cities of Los Angeles (USA), Thessaloniki (Greece) and Milan (Italy), which share similar Mediterranean climates but are different in their urban emission sources and governing air quality regulations. The samples in Milan and Thessaloniki were mostly dominated by biomass burning activities whereas the particles collected in Los Angeles were primary impacted by traffic emissions. We analyzed the ambient PM2.5 mass concentration of Cadmium (Cd), Hexavalent Chromium (Cr(VI)), Nickel (Ni), Lead (Pb), as well as 13 PAH compounds in the PM samples, collected during both cold and warm periods at each location. Pb exhibited the highest annual average concentration in all three cities, followed by Ni, As, Cr(VI), Cd and PAHs, respectively. The cancer risk assessment based on outdoor pollutants was performed based on three different scenarios, with each scenario corresponding to a different level of infiltration of outdoor pollutants into the indoor environment. Thessaloniki exhibited a high risk associated with lifetime inhalation of As, Cr(VI), and PAHs, with values in the range of (0.97-1.57) × 10-6, (1.80-2.91) × 10-6, and (0.77-1.25) × 10-6, respectively. The highest cancer risk values were calculated in Milan, exceeding the US EPA standard by a considerable margin, where the lifetime risk values of exposure to As, Cr(VI), and PAHs were in the range of (1.29-2.08) × 10-6, (6.08-9.82) × 10-6, and (1.10-1.77) × 10-6, respectively. In contrast, the estimated risks associated with PAHs and metals, except Cr(VI), in Los Angeles were extremely lower than the guideline value, even when the infiltration factor was assumed to be at peak. The lifetime cancer risk values associated with As, Cd, Ni, Pb, and PAHs in Los Angeles were in the range of (0.04-0.33) × 10-6. This observation highlights the impact of local air quality measures in improving the air quality and lowering the cancer risks in Los Angeles compared to the other two cities.

Mass, composition, and sources of particulate matter in residential and traffic sites of an urban environment

Present study aims to assess the mass, composition, and sources of PM₁₀ and PM_2.5 (particulate matter having aerodynamic diameter less than or equal to 10 and 2.5 µm aerodynamic diameter, respectively) in Vellore city. Seasonal samples collected in traffic and residential sites were analyzed for ions, elements, organic carbon (OC), and elemental carbon (EC). Source apportionment of PM₁₀ and PM_2.5 is carried out using Chemical Mass Balance, Unmix, Positive Matrix Factorization and Principal Component Analysis receptor models. Results showed that traffic site had higher annual concentration (PM_2.5 = 62 ± 32 and PM₁₀ = 112 ± 23 µg m^-3) when compared to residential site (PM_2.5 = 54 ± 22 and PM₁₀ = 98 ± 20 µg m^-3). Al, Ca, Fe, K, and Mg known to have crustal origin dominated the element composition irrespective of PM size and sampling site. Among ions, SO₄^2- accounted highest in both sites with an average of 70 and 60% to PM_2.5 and PM₁₀ ionic mass. Elemental carbon contribution to PM mass was found highest in traffic site (PM_2.5 = 17 to 23% and PM₁₀ = 8 to 10%) than residential site (PM_2.5 = 9 to 17% and PM₁₀ = 4 to 8%). Elements, ions, OC, and EC accounted 12, 28, 34, and 16% of PM_2.5 mass and 12, 21, 20, and 8% of PM₁₀ mass, respectively. Different sources identified by the receptor models are resuspended road dust, crustal material, secondary aerosol, traffic, non-exhaust vehicular emissions, secondary nitrate, construction, cooking, and biomass burning. Since Vellore is aspiring to be a smart city, this study can help the policymakers in effectively curbing PM.

Brown carbon absorption and radiative effects under intense residential wood burning conditions in Southeastern Europe: New insights into the abundance and absorptivity of methanol-soluble organic aerosols

Biomass burning is a major source of Brown Carbon (BrC), strongly contributing to radiative forcing. In urban areas of the climate-sensitive Southeastern European region, where strong emissions from residential wood burning (RWB) are reported, radiative impacts of carbonaceous aerosols remain largely unknown. This study examines the absorption properties of water- and methanol-soluble organic carbon (WSOC, MeS_OC) in a city (Ioannina, Greece) heavily impacted by RWB. Measurements were performed during winter (December 2019 - February 2020) and summer (July - August 2019) periods, characterized by RWB and photochemical processing of organic aerosol (OA), respectively. PM_2.5 filter extracts were analyzed spectrophotometrically for water- and methanol-soluble BrC (WS_BrC, MeS_BrC) absorption. WSOC concentrations were quantified using TOC analysis, while those of MeS_OC were determined using a newly developed direct quantification protocol, applied for the first time to an extended series of ambient samples. The direct method led to a mean MeS_OC/OC of 0.68 and a more accurate subsequent estimation of absorption efficiencies. The mean winter WS_BrC and MeS_BrC absorptions at 365 nm were 13.9 Mm^-1 and 21.9 Mm^-1, respectively, suggesting an important fraction of water-insoluble OA. Mean winter WS_BrC and MeS_BrC absorptions were over 10 times those observed in summer. MeS_OC was more absorptive than WSOC in winter (mean mass absorption efficiencies - MAE₃₆₅: 1.81 vs 1.15 m² gC^-1) and especially in summer (MAE: 1.12 vs 0.27 m² gC^-1) due to photo-dissociation and volatilization of BrC chromophores. The winter radiative forcing (RF) of WS_BrC and MeS_BrC relative to elemental carbon (EC) was estimated at 8.7 % and 16.7 %, respectively, in the 300-2500 nm band. However, those values increased to 48.5 % and 60.2 % at 300-400 nm, indicating that, under intense RWB, BrC forcing becomes comparable to that of soot. The results highlight the consideration of urban BrC emissions in radiative transfer models, as a considerable climate forcing factor.

Meteorological factors contributing to organic and elemental carbon concentrations in PM10 near an open-pit coal mine

Variations in the carbonaceous aerosol contents, organic carbon (OC) and elemental carbon (EC), in particulate matter less than 10 μm in size (PM₁₀), were analyzed at sites influenced by coal mining in an open-pit mine located in northern Colombia. Samples were collected during different seasonal periods throughout 2015. Meteorological variables for each site were examined during the different seasons. Aerosols were detected using a thermal-optical reflectance protocol method. The highest PM₁₀ concentrations, between the ranges of 28.2 ± 8.2 μg m^-3 and 75.0 ± 36.5 μg m^-3, were recorded during the dry season. However, the highest concentrations of OC (4.8-14.2 μg m^-3) and EC (2.9-13.9 μg m^-3) in PM₁₀ were observed during the transition period between the dry and wet seasons. The strong correlation between OC and EC in PM₁₀ (r = 0.6-1.0) during the transition season indicates a common primary combustion source. High OC (> 8.3 μg m^-3) and EC (> 6.9 μg m^-3) concentrations were associated with low wind speeds (< 2.1 m s^-1) moving in different directions. Analyses of the sources of atmospheric aerosol pollutants in the mining area in northern Colombia showed that the daily maximum total carbon concentrations were mainly associated with regional atmospheric transport of particulate matter from industrial areas and biomass burning sites located in the territory of Venezuela.

Transport route-based cluster analysis of chemical fingerprints and source origins of marine fine particles (PM2.5) in South China Sea

The fingerprints and source origins of marine PM_2.5 at two background islands in the South China Sea were clustered via trajectory analysis and positive matrix factorization. High PM_2.5 concentrations at the Dongsha Islands occurred for the north routes, while Nansha Islands had similar PM_2.5 concentrations amongst the transport routes. However, the chemical characteristics of PM_2.5 varied with the transport routes. Secondary inorganic aerosols (NO₃^-, SO₄^2-, and NH₄⁺) were abundant in water-soluble ions which dominated PM_2.5. Crustal metals were the abundant metals in PM_2.5, while trace metals were primarily originated from man-made sources. Organic carbon was superior to elemental carbon, and high concentrations of levoglucosan and organic acids were observed for the north routes. Overall, marine PM_2.5 at the Dongsha Islands was highly influenced by long-range transport of Asian continental outflows, while particulate air quality at the Nansha Islands was mainly governed by clean air parcels blown from the SCS.

Organic and Elemental Carbon in the Urban Background in an Eastern Mediterranean City

The Mediterranean region is an important area for air pollution as it is the crossroads between three continents; therefore, the concentrations of atmospheric aerosol particles are influenced by emissions from Africa, Asia, and Europe. Here we concentrate on an eleven-month time series of the ambient concentration of organic carbon (OC) and elemental carbon (EC) between May 2018–March 2019 in Amman, Jordan. Such a dataset is unique in Jordan. The results show that the OC and EC annual mean concentrations in PM2.5 samples were 5.9 ± 2.8 µg m–3 and 1.7 ± 1.1 µg m–3, respectively. It was found that the majority of OC and EC concentrations were within the fine particle fraction (PM2.5). During sand and dust storm (SDS) episodes OC and EC concentrations were higher than the annual means; the mean values during these periods were about 9.6 ± 3.5 µg m–3 and 2.5 ± 1.2 µg m–3 in the PM2.5 samples. Based on this, the SDS episodes were identified to be responsible for an increased carbonaceous aerosol content as well as PM2.5 and PM10 content, which may have direct implications on human health. This study encourages us to perform more extensive measurements during a longer time period and to include an advanced chemical and physical characterization for urban aerosols in the urban atmosphere of Amman, which can be representative of other urban areas in the region.

Effects of carbonaceous materials and particle size on oral and inhalation bioaccessibility of PAHs and OPEs in airborne particles

Bioavailability of environmental contaminants is attracting considerable scientific attention due to growing awareness of its importance for risk assessment. In this study, size-segregated airborne particles were collected from six point-source sites, an urban residential site, and a sub-urban site. Potential factors governing bioaccessibility of the particle-bound polycyclic aromatic hydrocarbons (PAHs) and organophosphorus esters (OPEs) in stimulated gastrointestinal and respiratory tracts were elucidated. Particle concentrations of PAHs and OPEs at the eight sites were 2.4-32.3 ng/m³ and 1.6-19.9 ng/m³, respectively. In fine particles (with aerodynamic diameter less than 2.5 μm), 4- to 6-ring PAHs were more strongly correlated with organic carbon (OC) than elemental carbon (EC); while 3- and 4-ring PAHs in coarse particles (2.5-10 μm) tended to associate with EC. OPEs mostly showed significant correlations with EC in both fine and coarse particles. OC and EC exerted a significantly restraining effect on the oral and inhalation bioaccessibility of most hydrophobic organic contaminants (HOCs) in fine particles due to sorption of HOC molecules to these components. Furthermore, the effects varied, which could depend either on the emission sources (for oral bioaccessibility of PAHs) or the physicochemical properties of HOCs (for bioaccessibility of OPEs and inhalation bioaccessibility of PAHs). Linear regression between OC/EC contents and HOC bioaccessibility indicated that EC should play a more important role in the inhalation bioaccessibility than the oral bioaccessibility. Particle size of airborne particles is a relatively less significant factor determining the bioaccessibility.

Air pollution levels near crossroads with different traffic density and the estimation of health risk

The aim of this study was to determine the influence of traffic density on air pollutant levels as well as to analyse the spatial and temporal distribution of particulate pollutants and their health risk. The following species related to traffic pollution were measured: PM₁₀, elemental and organic carbon and polycyclic aromatic hydrocarbons (PAHs) in PM₁₀ and gas pollutants (SO₂, NO₂ and CO). The measurements were carried out at four crossroad sites in the city. Samples of PM₁₀ were collected over three periods (6 am to 2 pm, 2 pm to 10 pm and 10 pm to 6 am) on working days and weekends. Statistically significant differences were found between sampling sites for all pollutant concentrations, except for NO₂. The highest mass concentrations of PM₁₀, carbon and PAHs were observed in the south of the city with the highest traffic density. Concentrations of gasses (CO and NO₂) showed high values in morning and in the late afternoon and evening (west and east). At all measuring sites, the highest concentration of particle-bound pollutants was mostly recorded during morning and afternoon, except at the south, where elevated PAHs concentrations were recorded during night period, which indicated that residential heating takes up a portion of pollution sources in this area. Although for most of the pollutants the concentrations varied during the day, statistically significant differences between sampling periods were not found. The highest health risk was obtained at the south, where it was scored as significant.

The carbon components in indoor and outdoor PM2.5 in winter of Tianjin

To study the carbon components in indoor and outdoor PM2.5, the samples of PM2.5 were collected from Nankai University in December 2015. The contents of eight carbon components were analyzed to use the thermo-optical reflection method. The results indicated that organic carbon (OC) mass concentration was 17.01, 19.48 and 18.92 µg/m3 in outdoor, dormitory and laboratory; elemental carbon (EC) mass concentration was 7.97, 3.56 and 3.53 µg/m3 in outdoor, dormitory and laboratory; and the total carbon aerosol was the proportion of more than 23% of PM2.5 samples. Lower wind speed and higher relative humidity were helpful to the accumulation of PM2.5. The ratio of OC/EC was > 2, and the SOC/OC ratio was > 30%, indicating that SOC was a crucial component indoors and outdoors. About 72% and 85% of the outdoor OC entering dormitory and laboratory environment, and about 59% and 71% of the outdoor EC entering dormitory and laboratory environment. Factor analysis of the eight carbon fractions indicated that the sources of OC and EC in outdoor, dormitory and laboratory is different.

Multi-city comparative PM2.5 source apportionment for fifteen sites in Europe: The ICARUS project

PM_2.5 is an air pollution metric widely used to assess air quality, with the European Union having set targets for reduction in PM_2.5 levels and population exposure. A major challenge for the scientific community is to identify, quantify and characterize the sources of atmospheric particles in the aspect of proposing effective control strategies. In the frame of ICARUS EU2020 project, a comprehensive database including PM_2.5 concentration and chemical composition (ions, metals, organic/elemental carbon, Polycyclic Aromatic Hydrocarbons) from three sites (traffic, urban background, rural) of five European cities (Athens, Brno, Ljubljana, Madrid, Thessaloniki) was created. The common and synchronous sampling (two seasons involved) and analysis procedure offered the prospect of a harmonized Positive Matrix Factorization model approach, with the scope of identifying the similarities and differences of PM_2.5 key-source chemical fingerprints across the sampling sites. The results indicated that the average contribution of traffic exhausts to PM_2.5 concentration was 23.3% (traffic sites), 13.3% (urban background sites) and 8.8% (rural sites). The average contribution of traffic non-exhausts was 12.6% (traffic), 13.5% (urban background) and 6.1% (rural sites). The contribution of fuel oil combustion was 3.8% at traffic, 11.6% at urban background and 18.7% at rural sites. Biomass burning contribution was 22% at traffic sites, 30% at urban background sites and 28% at rural sites. Regarding soil dust, the average contribution was 5% and 8% at traffic and urban background sites respectively and 16% at rural sites. Sea salt contribution was low (1-4%) while secondary aerosols corresponded to the 16-34% of PM_2.5. The homogeneity of the chemical profiles as well as their relationship with prevailing meteorological parameters were investigated. The results showed that fuel oil combustion, traffic non-exhausts and soil dust profiles are considered as dissimilar while biomass burning, sea salt and traffic exhaust can be characterized as relatively homogenous among the sites.

Secondary organic aerosol tracers and related polar organic compounds between urban and rural areas in the Eastern Mediterranean region: source apportionment and the influence of atmospheric oxidants

Fine particle samples were collected during summer at an urban (LIM) and a rural/background (AGM) site of Cyprus. They were analyzed for pinene and isoprene secondary organic aerosol (PSOA-ISOA) tracers, linear dicarboxylic acids (DCAs), hydroxyacids (HAs), aromatic acids (AAs), monocarboxylic acids (MCAs) and levoglucosan by GC/MS with prior 3-step derivatization. DCAs, AAs, MCAs and levoglucosan exhibited significantly higher concentrations (p < 0.05) in LIM, PSOAs and ISOAs in AGM (p < 0.05), whereas mixed trends were found for HAs. Among DCAs, succinic was the most abundant in both sites, accounting for 42.5% and 36.5% of the total DCAs in LIM and AGM respectively, followed by adipic in LIM (20.1%) and azelaic in AGM (22.4%). Malic, phthalic and palmitic acids were the dominant HA, AA and MCA, respectively. Regarding PSOAs, significant differences were observed between the two sites, with the first-generation products accounting for 59.8% of the total measured PSOAs in AGM, but were remarkably lowered (10.3%) in LIM indicating that they were highly oxidized. 2-Methylerythritol was the dominant ISOA tracer in both sites; nevertheless the elevated relative abundance of 2-methylglyceric acid in LIM implies the influences of higher NO_x levels. The increased O₃ levels observed in AGM appear to have a significant impact on SOA formation. Source apportionment tools employed revealed factors related to secondary formation processes including oxidation of unsaturated fatty acids, pinene, isoprene and anthropogenic VOCs and factors associated with primary sources such as biomass burning, plant emissions and/or cooking and motor exhaust, with noteworthy differences observed between the two areas.

Chemical Characterization of Seasonal PM2.5 Samples and Their Cytotoxicity in Human Lung Epithelial Cells (A549)

In order to study the toxicity of fine particulate matter (PM_2.5) sourced from different seasons on human health, we collected PM_2.5 samples quarterly from March 2016 to February 2017 in Nanjing, China. The component analysis results showed that high proportions of water-soluble organic carbon (WSOC), SO₄²⁻, Ca²⁺ and Mg²⁺ were found in the summer samples, while high proportions of NO₃⁻, NH₄⁺ and heavy metals were observed in the spring and winter samples. Then human lung epithelial cells (A549) were exposed to the PM_2.5 samples. The toxicological results indicated that reactive oxygen species (ROS) production in the spring and winter samples was higher than that in the summer and fall samples, which was related to the contribution of some heavy metals and inorganic ions (e.g., Pb and NO₃⁻). However, the apoptosis rates of the cells showed the opposite seasonal changes as what the ROS did, which might be caused by the higher WSOC content in the summer. In addition, regression analysis also showed the importance of the PM_2.5 components in ROS production and apoptosis. Particularly, Zn had the strongest correlation with ROS production (R = 0.863) and cell apoptosis (R = 0.675); thus, the specific toxicity of Zn in PM_2.5 deserves further investigation. Our results could be beneficial for assessing the health risks and controlling the toxic components of PM_2.5 in Nanjing.

Source Apportionment of Fine Organic and Inorganic Atmospheric Aerosol in an Urban Background Area in Greece

Fine particulate matter (PM) originates from various emission sources and physicochemical processes. Quantification of the sources of PM is an important step during the planning of efficient mitigation strategies and the investigation of the potential risks to human health. Usually, source apportionment studies focus either on the organic or on the inorganic fraction of PM. In this study that took place in Patras, Greece, we address both PM fractions by combining measurements from a range of on- and off-line techniques, including elemental composition, organic and elemental carbon (OC and EC) measurements, and high-resolution Aerosol Mass Spectrometry (AMS) from different techniques. Six fine PM2.5 sources were identified based on the off-line measurements: secondary sulfate (34%), biomass burning (15%), exhaust traffic emissions (13%), nonexhaust traffic emissions (12%), mineral dust (10%), and sea salt (5%). The analysis of the AMS spectra quantified five factors: two oxygenated organic aerosols (OOA) factors (an OOA and a marine-related OOA, 52% of the total organic aerosols (OA)), cooking OA (COA, 11%) and two biomass burning OA (BBOA-I and BBOA-II, 37% in total) factors. The results of the two methods were synthesized, showcasing the complementarity of the two methodologies for fine PM source identification. The synthesis suggests that the contribution of biomass burning is quite robust, but that the exhaust traffic emissions are not due to local sources and may also include secondary OA from other sources.

Carbonaceous Aerosols in Contrasting Atmospheric Environments in Greek Cities: Evaluation of the EC-tracer Methods for Secondary Organic Carbon Estimation

This study examines the carbonaceous-aerosol characteristics at three contrasting urban environments in Greece (Ioannina, Athens, and Heraklion), on the basis of 12 h sampling during winter (January to February 2013), aiming to explore the inter-site differences in atmospheric composition and carbonaceous-aerosol characteristics and sources. The winter-average organic carbon (OC) and elemental carbon (EC) concentrations in Ioannina were found to be 28.50 and 4.33 µg m−3, respectively, much higher than those in Heraklion (3.86 µg m−3 for OC and 2.29 µg m−3 for EC) and Athens (7.63 µg m−3 for OC and 2.44 µg m−3 for EC). The winter OC/EC ratio in Ioannina (6.53) was found to be almost three times that in Heraklion (2.03), indicating a larger impact of wood combustion, especially during the night, whereas in Heraklion, emissions from biomass burning were found to be less intense. Estimations of primary and secondary organic carbon (POC and SOC) using the EC-tracer method, and specifically its minimum R-squared (MRS) variant, revealed large differences between the sites, with a prevalence of POC (67–80%) in Ioannina and Athens and with a larger SOC fraction (53%) in Heraklion. SOC estimates were also obtained using the 5% and 25% percentiles of the OC/EC data to determine the (OC/EC)pri, leading to results contrasting to the MRS approach in Ioannina (70–74% for SOC). Although the MRS method provides generally more robust results, it may significantly underestimate SOC levels in environments highly burdened by biomass burning, as the fast-oxidized semi-volatile OC associated with combustion sources is classified in POC. Further analysis in Athens revealed that the difference in SOC estimates between the 5% percentile and MRS methods coincided with the semi-volatile oxygenated organic aerosol as quantified by aerosol mass spectrometry. Finally, the OC/Kbb+ ratio was used as tracer for decomposition of the POC into fossil-fuel and biomass-burning components, indicating the prevalence of biomass-burning POC, especially in Ioannina (77%).

Occurrence, gas-particle partitioning, and sources of polybrominated diphenyl ethers in the atmosphere over the Yangtze River Estuary, East China Sea

To investigate the occurrence, gas-particle partitioning, and potential sources of polybrominated diphenyl ethers (PBDEs) in the atmosphere over the Yangtze River Estuary, gas and particle samples were collected at the remote Huaniao Island, East China Sea, during a whole year from 2013 to 2014. Nine PBDEs, with total atmospheric concentration of Σ₉BDEs of 20.3 ± 26.5 pg/m³, were found in both the gas and particle phases in most samples. BDE-209 dominated both the gas and particle phases, which is consistent with the PBDE usage record in China. Seasonal variation of particle-phase Σ₉BDEs was observed, with the highest concentration in winter and the lowest in summer; however, a reversed seasonal trend was observed in the gas phase. Correlation analysis between log K_p and log K_OA suggested that the gas-particle (G/P) partitioning was in a non-equilibrium state, particularly for BDE-209 throughout the year. The K_OA-based adsorption model prediction performed relatively well for the particle-phase fraction of Br_<10-BDEs, but largely overestimated BDE-209. A steady-state model could be superior to predict G/P partitioning of BDE-209 based on annual values, though with the exception of summer samples. A relatively higher gas-phase distribution for BDE-209 than high-brominated BDEs was observed, especially in summer, when it reached 73%, implying a sustained input of gas-phase BDE-209. The potential source contribution function showed that the possible source regions for BDE-209 included Shandong and Jiangsu Provinces (the main BDE-209 production regions in China), the Yangtze River Delta region, and the southeastern coastal areas (which hosts intensive electronic waste recycling activities).

Insights into the origin and evolution of carbonaceous aerosols in a mediterranean urban environment

Organic carbon (OC) and elemental carbon (EC) concentrations were measured in PM₁ and PM₁₀ daily samples collected at an urban station in Elche (southeastern Spain) from February 2015 to February 2018. The effect of seasonal weather conditions, traffic, and specific pollution events (Saharan dust outbreaks and local pollution episodes) on the variability of carbonaceous aerosol levels was studied in this work. The joint contribution of carbonaceous species to PM₁ and PM₁₀ mass concentrations was, respectively, 48% and 26%. Both OC and EC concentrations were higher in winter than in summer because of the poor dispersion conditions and lower temperatures leading to the condensation of semivolatile species. Secondary organic carbon (SOC), estimated using the EC tracer method, also exhibited higher concentrations during winter, indicating that the prevailing meteorological conditions during the cold season are more favorable for the formation of secondary organic aerosols. Our results suggest different formation pathways of secondary organic components during summer and winter. At the sampling site, EC was primarily derived from traffic emissions, independently of the season and the type of event, with a modest contribution from biomass burning (<20%). The estimated contribution from this source to OC levels was similar. Local pollution episodes lead to a significant increase in the concentrations of carbonaceous species, in particular of SOC, influencing its temporal variation. On average, African dust outbreaks showed a moderate impact on the levels of carbonaceous aerosols; however, the effect was significantly stronger during winter Saharan events.

Inter-comparison of carbon content in PM10 and PM2.5 measured with two thermo-optical protocols on samples collected in a Mediterranean site

Scientific interest is focusing on different approaches for characterising organic carbon (OC), elemental carbon (EC) and equivalent black carbon (eBC), although EUSAAR2 protocol has been established and frequently used in EU for regulatory purposes. Discrepancies are observed due to thermal protocols used for OC/EC determinations and the effect of the chemical-physical properties of aerosol using optical measurements for eBC. In this work, a long-term inter-comparison of carbon measurements with two widely used protocols (EUSAAR2 and NIOSH870) was performed on PM_2.5 and PM₁₀ samples. The influence of the protocol on the evaluation of secondary organic aerosol (SOC) and on the correlation between EC and eBC was investigated. An extensive check of repeatability gave typical uncertainties of ~ 5% for TC and OC, and ~ 10% for EC for both thermal protocols. Results show that OC is statistically comparable between the two protocols but EC is significantly higher with EUSAAR2, especially during the warm season. The ratio OC/EC is lower with EUSAAR2, also showing a seasonality (lower values in the warm season) not observed with NIOSH870. Despite the differences in OC/EC ratios, the contribution of SOC to OC (~ 50%), evaluated using the EC-tracer method, did not differ significantly between the two protocols and for both size fractions. Further, SOC/OC ratios were comparable in cold and warm periods. eBC/EC ratios larger than one for both protocols were obtained, 1.62 (EUSAAR2) and 1.92 (NIOSH870), and also correlated with the ratio OC/EC for both protocols, especially in the cold season.

Exposure to inhalable aerosols and their chemical characteristics from different potential factors in urban office environments

Indoor air quality (IAQ) is one of important issues in indoor environment due to exposure to inhalable aerosol which is affected by indoor and outdoor factors. To demonstrate the effect of indoor and outdoor to the IAQ, this study presents three fractions of particulate matter (PM) (PM_2.5, PM₄, PM₁₀), characterization of I/O ratios for PM under potential indoor (average occupancy) and outdoor factors (Asian dust, rain, wind, and snow days) and evaluation of chemical components in aerosols. In the chemical characteristics of PM, organic carbon (OC), elemental carbon (EC), and trace elements were analyzed in indoors and outdoors. There was no significant difference of respirable aerosol (PM_2.5 and PM₄) concentration in different indoor environments. The concentration of OC in PM₁₀ was lower in indoor than outdoor in summer and winter seasons, while the concentration of OC in PM_2.5 was higher in indoor than outdoor. Also, the OC/EC ratios in PM_2.5 were higher than those in PM₁₀. Further, the ratios of trace elements in PM_2.5 and PM₁₀ were different at various locations within the building. This study demonstrated that the exposure to PM_2.5 is greatly affected by outdoor environment. Although there was no difference in inhalable and respirable aerosol concentration at different locations within the building, the impact of outdoor factors is strongly supported by OC/EC ratios and PM_2.5/PM₁₀ ratios of trace elements. This study shows that chemical components through the HVAC system affected the exposure to the indoor respirable aerosol, which could lead to adverse effect on the indoor air quality.

East Siberian Arctic background and black carbon polluted aerosols at HMO Tiksi

Assessment of Arctic pollution is hampered by a lack of aerosol studies in Northern Siberia. Black carbon observations were carried out at the Hydrometeorological Observatory Tiksi, a coast of Laptev sea, from September 2014 to September 2016. Aerosol sampling was accompanied by physico-chemical characterization. BC climatology showed a seasonal variation with highest concentrations from January to March (up to 450ng/m³) and lowest ones for June and September (about 20ng/m³). Stagnant weather and stable atmosphere stratification resulted in accumulation of pollution, in dependence on the wind direction and air mass transportation. Carbon fractions, functionalities, ions, and elements are associated to marine, biogenic, and continental sources. In September low OC, aliphatic, carbonyls, amines, and hydroxyls characterize background aerosols. Na⁺/Cl^- ratio much higher than in sea-salt indicates a strong Cl depletion. Increased OC, aromatic, carbonyls, and nitrocompounds as well as waste burning markers K⁺, Cl^-, and PO₄^2- confirm impacts from Tiksi landfill burns. BC pollution episodes are differentiated through increased EBC and sulfates, related to gas flaring, industrial and residential emissions transported from Western Siberia while the increase of carbonyls, hydroxyl, and aromatic indicate emissions sources from Yakutia and Tiksi urban area. Arctic Haze aerosols are characterized by increased concentrations of SO₄^2- in comparison with OC, much higher abundance of oxygenated compounds with respect to alkanes of anthropogenic origin. In summer rich organic chemistry indicates impacts of biogenic, local urban, and shipping sources as well as secondary aerosol formation influenced by emissions from low latitude Siberia.

PM2.5 source apportionment for the port city of Thessaloniki, Greece

This paper aims to identify the chemical fingerprints of potential PM2.5 sources and estimate their contribution to Thessaloniki port-city's air quality. For this scope, Positive Matrix Factorization model was applied on a comprehensive PM2.5 dataset collected over a one-year period, at two sampling sites: the port and the city center. The model indicated six and five (groups of) sources contributing to particle concentration at the two sites, respectively. Traffic and biomass burning (winter months) comprise the major local PM sources for Thessaloniki (their combined contribution can exceed 70%), revealing two of the major control-demanding problems of the city. Shipping and in-port emissions have a non-negligible impact (average contribution to PM2.5: 9-13%) on both primary and secondary particles. Road dust factor presents different profile and contribution at the two sites (19.7% at the port; 7.4% at the city center). The secondary-particle factor represents not only the aerosol transportation over relatively long distances, but also a part of traffic-related pollution (14% at the port; 34% at the city center). The study aims to contribute to the principal role of quantitative information on emission sources (source apportionment) in port-cities for the implementation of the air quality directives and guidelines for public health.

Radiocarbon determination of fossil and contemporary carbon contribution to aerosol in the Pacific Islands

Combustion emissions are of growing concern across all Pacific Island Countries, which account for >10,000 km² of the earth's surface area; as for many other small island states globally. Apportioning emissions inputs for Suva, the largest Pacific Island city, will aid in development of emission reduction strategies. Total suspended particulate (TSP) and fine particulate (PM_2.5) samples were collected for Suva City, a residential area (Kinoya, TSP) and a mainly ocean-influenced site (Suva Point, TSP) from 2014 to 2015. Percentages of contemporary and fossil carbon were determined by radiocarbon analysis (accelerator mass spectrometry); for non‑carbonate carbon (NCC), elemental carbon (EC) and organic carbon (OC). Source contributions to particulate matter were identified and the accuracy of previous emissions inventory and source apportionment studies was evaluated. Suva Point NCC concentrations (2.7 ± 0.4 μg/m³) were four times lower than for City (13 ± 2 μg/m³ in TSP) and Kinoya (13 ± 1 μg/m³ in TSP); demonstrating the contribution of land-based emissions activities in city and residential areas. In Suva City, total NCC in air was 81% (79%-83%) fossil carbon, from vehicles, shipping, power generation and industry; whilst in the residential area, 48% (46%-50%) of total NCC was contemporary carbon; reflecting the higher incidence of biomass and waste burning and of cooking activities. Secondary organic fossil carbon sources contributed >36% of NCC mass at the city and >29% at Kinoya; with biogenic carbon being Kinoya's most significant source (approx. 30% of NCC mass). These results support the previous source apportionment studies for the city area; yet show that, in line with emissions inventory studies, biomass combustion contributes more PM_2.5 mass in residential areas. Hence air quality management strategies need to target open burning activities as well as fossil fuel combustion.

Comparison of Measurement-Based Methodologies to Apportion Secondary Organic Carbon (SOC) in PM2.5: A Review of Recent Studies

Secondary organic aerosol (SOA) is known to account for a major fraction of airborne particulate matter, with significant impacts on air quality and climate at the global scale. Despite the substantial amount of research studies achieved during these last decades, the source apportionment of the SOA fraction remains difficult due to the complexity of the physicochemical processes involved. The selection and use of appropriate approaches are a major challenge for the atmospheric science community. Several methodologies are nowadays available to perform quantitative and/or predictive assessments of the SOA amount and composition. This review summarizes the current knowledge on the most commonly used approaches to evaluate secondary organic carbon (SOC) contents: elemental carbon (EC) tracer method, chemical mass balance (CMB), SOA tracer method, radiocarbon (14C) measurement and positive matrix factorization (PMF). The principles, limitations, challenges and good practices of each of these methodologies are discussed in the present article. Based on a comprehensive—although not exhaustive—review of research papers published during the last decade (2006–2016), SOC estimates obtained using these methodologies are also summarized for different regions across the world. Conclusions of some studies which are directly comparing the performances of different methodologies are then specifically discussed. An overall picture of SOC contributions and concentrations obtained worldwide for urban sites under similar conditions (i.e., geographical and seasonal ones) is also proposed here. Finally, further needs to improve SOC apportionment methodologies are also identified and discussed.

Carbonaceous PM10 and PM2.5 and secondary organic aerosol in a coastal rural site near Brindisi (Southern Italy)

Organic and elemental carbon were measured both in daily PM10 and PM2.5 and in 6 h range time PM2.5 samples collected from September 2015 to October 2015 in a coastal rural site near Brindisi in the Apulia region (Italy), in order to determine factors affecting the carbonaceous aerosol variations. Carbon content (total carbon TC) represented a considerable fraction for both PM10 and PM2.5. In particular, in PM10 samples, organic carbon (OC) varied from 1.06 to 18.32 μg m^-3 with a mean concentration of 5 ± 4 μg m^-3 and EC varied from 0.11 to 0.88 μg m^-3 with a mean value of 0.41 ± 0.19 μg m^-3. In PM2.5 samples, OC varied from 0.54 to 12.91 μg m^-3 with a mean concentration of 3.5 ± 2.8 μg m^-3 and EC varied from 0.11 to 0.85 μg m^-3 with a mean value of 0.35 ± 0.18 μg m^-3. The highest values for both parameters were recorded when the air masses were coming from NE Europe and when Saharan Dust events were recognized. The results show that OC and EC exhibited higher concentrations during the night hours, suggesting that stable atmosphere and lower mixing conditions play important roles for the accumulation of air pollutants and promote condensation or adsorption of semivolatile organic compounds. In samples from a Saharan Dust event and in samples with the lowest and the highest OC_sec, ATR-FTIR analysis allowed us to identify organic functional groups including the non-acid organic hydroxyl C-OH group (e.g., sugars, anhydrosugars, and polyols), carbonyl C=O group, carboxylic acid COOH group, aromatic and aliphatic unsaturated C=C-H group, aliphatic saturated C-C-H group, and amine NH₂ group. Some inorganic ions were also identified: carbonates, sulfate, silicate, and ammonium. The dusty samples are mainly characterized by the presence of carbonate and hydrogen sulfate ions and by kaolinite (absorption at 914 and 1010 cm^-1), while in samples with air masses coming from the NE, OC is mainly characterized by aliphatic and aromatic C-H and O-H and N-H groups (absorptions in the range 3500-2700 cm^-1) and by the presence of organonitrate, aromatic amide and amine, and carboxylic acids (absorptions at 1630 and 1770-1700 cm^-1). Graphical abstract ᅟ.

Characterization of dissolved organic carbon in rainwater of an urban/coastal site in Mediterranean area

Concentration and optical characteristics of dissolved organic matter were studied in rainwater in the urban/coastal city of Thessaloniki, Northern Greece for 2-yr sampling period (2014-2016). The concentration of DOC ranged from 0.33-24.5mg/L with higher values measured in spring-summer period. Higher aromaticity and fluorescence intensity was observed in winter. Chromophoric organic matter represents a significant fraction of DOC that is highly correlated with fluorescence during cold period. Three factor spectral profiles of fluorescence were elucidated, with peaks at protein-like and humic-like area at different intensities. Fluorophores at shorter wavelengths are more susceptible to changes. DOC showed negative relationship with precipitation height, particularly during autumn and spring suggesting washout effect. NMR spectra showed the dominance of aliphatic protons in rainwater. Levoglucosan, sucrose and arabitol were determined in rainwater at concentrations <0.07-2.2μg/L, <0.03-5.1μg/L and <0.03-2.1μg/L, respectively showing impact of biomass combustion and biogenic emissions.

Study of polar organic compounds in airborne particulate matter of a coastal urban city

Two classes of polar organic compounds, dicarboxylic acids (DCAs) and sugars/sugar anhydrides (S/SAs), were measured in airborne particulate matter in the area of Thessaloniki, northern Greece. The target compounds were measured simultaneously in two particle fractions PM₁₀ and PM_2.5 during cold and warm periods by employing extraction in an ultrasonic bath with a mixture of MeOH/DCM (1:2 v/v), derivatization with BSTFA-TMCS and GC-MS for analysis. At both fractions, phthalic was the predominant carboxylic acid during cold season and a-ketoglutaric acid in warm season, followed by maleic and malic. Levoglucosan was the dominant sugar anhydride during the cold and arabitol during the warm season. In total, the distribution of DCAs seemed to favor the PM_2.5 particle fraction, probably due to anthropogenic emissions and photochemical formation. The relative contribution of DCAs to PM_2.5 fraction was 0.9-3.2% in cold and 0.9-7.0% in warm period. Regarding S/SAs, levoglucosan was also predominantly distributed in fine particles, with relative contribution to this fraction 0.1-6.3% in cold and <0.65% in warm season, suggesting impact of biomass burning emissions. In contrast, arabitol, fructose, and glucose were mainly found in coarse fraction, possibly due to their biogenic origin. Negative correlation of target compounds with temperature and total solar radiation suggested the contribution of seasonal dependant local sources. Positive relationship with NO and NO₂ oxidants and relative humidity showed secondary formation of polar compounds or enhanced gas-to-particle conversion.

Insights into the characteristics and sources of primary and secondary organic carbon: High time resolution observation in urban Shanghai

There is growing evidence suggesting that organic aerosols play an important role in the evolution of severe haze episodes. However, long-term investigations of the different characteristics of carbonaceous aerosols during haze and non-haze days are insufficient. In this work, hourly measurements of organic carbon (OC) and elemental carbon (EC) in PM_2.5 were conducted in Shanghai, a megacity in Eastern China, over the course of a year from July 2013 to June 2014. Both OC and EC exhibited a bimodal diel pattern and were highly dependent on the wind speed and direction. The concentration-weighted trajectory (CWT) analysis illustrated that primary OC (POC) and EC were largely associated with regional and long-range transport. Secondary OC (SOC) formation was the strongest during the harvest season owing to significant biomass burning emissions from the adjacent Yangtze River Delta and farther agricultural regions. Compared to OC (6.7 μg m^-3) and EC (2.0 μg m^-3) in the non-haze days, higher levels of both OC (15.6 μg m^-3) and EC (7.7 μg m^-3) were observed in the haze days as expected, but with lower OC/EC ratios in the haze days (2.4) than in non-haze days (4.6). The proportion of POC and EC in PM_2.5 remained relatively constant as a function of PM_2.5 mass loadings, while that of SOC significantly decreased on the highly polluted days. It is concluded that the haze pollution in urban Shanghai was influenced more by the primary emissions (POC and EC), while the role of SOC in triggering haze was limited.

Fine particles at a background site in Central France: Chemical compositions, seasonal variations and pollution events

To expand our knowledge of regional fine particles in Central France (Centre-Val de Loire region), a field observation study of PM_2.5 was carried out at Verneuil site (46.81467N, 2.61012E, 180m.a.s.l.) from 2011 to 2014. The mass concentrations of water-soluble inorganic ions (WSIIs), organic carbon (OC), elemental carbon (EC) and biomass burning tracer (Levoglucosan) in PM_2.5 were measured. Annual average PM_2.5 mass concentrations were 11.8, 9.5, 12.6 and 10.2μg·m^-3 in 2011, 2012, 2013 and 2014, respectively, three of four higher than the WHO guideline of 10μg·m^-3. Secondary inorganic aerosol (SIA) and organic matter (OM) appeared to be the major components in PM_2.5 in Verneuil, contributing 30.1-41.8% and 36.9-46.3%, respectively. Main chemical species were observed in the following order: winter≥spring>autumn>summer. Backward atmospheric trajectories were performed using Hysplit model and suggested that the PM_2.5 pollutants caused by atmospheric transport were mainly originated from European inland, mainly east to north-east areas. During the observation period, five pollution events were reported and indicated that not only the polluted air masses from central Europe but also the biomass burning from East Europe significantly influenced the air quality in Verneuil site.

Source apportionment of PM10 and PM2.5 in major urban Greek agglomerations using a hybrid source-receptor modeling process

A hybrid source-receptor modeling process was assembled, to apportion and infer source locations of PM₁₀ and PM_2.5 in three heavily-impacted urban areas of Greece, during the warm period of 2011, and the cold period of 2012. The assembled process involved application of an advanced computational procedure, the so-called Robotic Chemical Mass Balance (RCMB) model. Source locations were inferred using two well-established probability functions: (a) the Conditional Probability Function (CPF), to correlate the output of RCMB with local wind directional data, and (b) the Potential Source Contribution Function (PSCF), to correlate the output of RCMB with 72h air-mass back-trajectories, arriving at the receptor sites, during sampling. Regarding CPF, a higher-level conditional probability function was defined as well, from the common locus of CPF sectors derived for neighboring receptor sites. With respect to PSCF, a non-parametric bootstrapping method was applied to discriminate the statistically significant values. RCMB modeling showed that resuspended dust is actually one of the main barriers for attaining the European Union (EU) limit values in Mediterranean urban agglomerations, where the drier climate favors build-up. The shift in the energy mix of Greece (caused by the economic recession) was also evidenced, since biomass burning was found to contribute more significantly to the sampling sites belonging to the coldest climatic zone, particularly during the cold period. The CPF analysis showed that short-range transport of anthropogenic emissions from urban traffic to urban background sites was very likely to have occurred, within all the examined urban agglomerations. The PSCF analysis confirmed that long-range transport of primary and/or secondary aerosols may indeed be possible, even from distances over 1000km away from study areas.

Polybrominated diphenyl ethers (PBDEs) in background air around the Aegean: implications for phase partitioning and size distribution

The occurrence and atmospheric behavior of tri- to deca-polybrominated diphenyl ethers (PBDEs) were investigated during a 2-week campaign concurrently conducted in July 2012 at four background sites around the Aegean Sea. The study focused on the gas/particle (G/P) partitioning at three sites (Ag. Paraskevi/central Greece/suburban, Finokalia/southern Greece/remote coastal, and Urla/Turkey/rural coastal) and on the size distribution at two sites (Neochorouda/northern Greece/rural inland and Finokalia/southern Greece/remote coastal). The lowest mean total (G + P) concentrations of ∑₇PBDE (BDE-28, BDE-47, BDE-66, BDE-99, BDE-100, BDE-153, BDE-154) and BDE-209 (0.81 and 0.95 pg m^-3, respectively) were found at the remote site Finokalia. Partitioning coefficients, K _P, were calculated, and their linear relationships with ambient temperature and the physicochemical properties of the analyzed PBDE congeners, i.e., the subcooled liquid pressure (P _L°) and the octanol-air partition coefficient (K _OA), were investigated. The equilibrium adsorption (P _L°-based) and absorption (K _OA-based) models, as well as a steady-state absorption model including an equilibrium and a non-equilibrium term, both being functions of log K _OA, were used to predict the fraction Φ of PBDEs associated with the particle phase. The steady-state model proved to be superior to predict G/P partitioning of BDE-209. The distribution of particle-bound PBDEs across size fractions < 0.95, 0.95-1.5, 1.5-3.0, 3.0-7.2, and > 7.2 μm indicated a positive correlation between the mass median aerodynamic diameter and log P _L° for the less brominated congeners, whereas a negative correlation was observed for the high brominated congeners. The potential source regions of PBDEs were acknowledged as a combination of long-range transport with short-distance sources.

PM2.5 in the Yangtze River Delta, China: Chemical compositions, seasonal variations, and regional pollution events

Fine particle (PM_2.5) samples were collected simultaneously at three urban sites (Shanghai, Nanjing, and Hangzhou) and one rural site near Ningbo in the Yangtze River Delta (YRD) region, China, on a weekly basis from September 2013 to August 2014. In addition, high-frequency daily sampling was conducted in Shanghai and Nanjing for one month during each season. Severe regional PM_2.5 pollution episodes were frequently observed in the YRD, with annual mean concentrations of 94.6 ± 55.9, 97.8 ± 40.5, 134 ± 54.3, and 94.0 ± 57.6 μg m^-3 in Shanghai, Nanjing, Hangzhou, and Ningbo, respectively. The concentrations of PM_2.5 and ambient trace metals at the four sites showed clear seasonal trends, with higher concentrations in winter and lower concentrations in summer. In Shanghai, similar seasonal patterns were found for organic carbon (OC), elemental carbon (EC), and water-soluble inorganic ions (K⁺, NH₄⁺, Cl^-, NO₃^-, and SO₄^2-). Air mass backward trajectory and potential source contribution function (PSCF) analyses implied that areas of central and northern China contributed significantly to the concentration and chemical compositions of PM_2.5 in Shanghai during winter. Three heavy pollution events in Shanghai were observed during autumn and winter. The modelling results of the Nested Air Quality Prediction Modeling System (NAQPMS) showed the sources and transport of PM_2.5 in the YRD during the three pollution processes. The contribution of secondary species (SOC, NH₄⁺, NO₃^-, and SO₄^2-) in pollution event (PE) periods was much higher than in BPE (before pollution event) and APE (after pollution event) periods, suggesting the importance of secondary aerosol formation during the three pollution events. Furthermore, the bioavailability of Cu, and Zn in the wintertime PM_2.5 samples from Shanghai was much higher during the pollution days than during the non-pollution days.

Cytotoxicity and genotoxicity induced in vitro by solvent-extractable organic matter of size-segregated urban particulate matter

Three organic fractions of different polarity, including a non polar organic fraction (NPOF), a moderately polar organic fraction (MPOF), and a polar organic fraction (POF) were obtained from size-segregated (<0.49, 0.49-0.97, 0.97-3 and >3 μm) urban particulate matter (PM) samples, and tested for cytotoxicity and genotoxicity using a battery of in vitro assays. The cytotoxicity induced by the organic PM fractions was measured by the mitochondrial dehydrogenase (MTT) cell viability assay applied on MRC-5 human lung epithelial cells. DNA damages were evaluated through the comet assay, determination of the poly(ADP-Ribose) polymerase (PARP) activity, and the oxidative DNA adduct 8-hydroxy-deoxyguanosine (8-OHdG) formation, while pro-inflammatory effects were assessed by determination of the tumor necrosis factor-alpha (TNF-α) mediator release. In addition, the Sister Chromatid Exchange (SCE) inducibility of the solvent-extractable organic matter was measured on human peripheral lymphocyte. Variations of responses were assessed in relation to the polarity (hence the expected composition) of the organic PM fractions, particle size, locality, and season. Organic PM fractions were found to induce rather comparable Cytotoxicity and genotoxicity of PM appeared to be rather independent from the polarity of the extractable organic PM matter (EOM) with POF often being relatively more toxic than NPOF or MPOF. All assays indicated stronger mass-normalized bioactivity for fine than coarse particles peaking in the 0.97-3 and/or the 0.49-0.97 μm size ranges. Nevertheless, the air volume-normalized bioactivity in all assays was highest for the <0.49 μm size range highlighting the important human health risk posed by the inhalation of these quasi-ultrafine particles.

Atmospheric occurrence and gas-particle partitioning of PBDEs at industrial, urban and suburban sites of Thessaloniki, northern Greece: Implications for human health

Air samples were collected during the cold and the warm period of the year 2012 and 2013 at three sites in the major Thessaloniki area, northern Greece (urban-industrial, urban-traffic and urban-background) in order to evaluate the occurrence, profiles, seasonal variation and gas/particle partitioning of polybrominated diphenyl ethers (PBDEs). The mean total concentrations of particle phase ∑12PBDE in the cold season were 28.7, 19.5 and 3.87 pg m(-3) at the industrial, urban-traffic and urban-background site, respectively, dropping slightly in the warm season (23.7, 17.5 and 3.14 pg m(-3)), respectively. The corresponding levels of gas-phase ∑12PBDE were 14.4, 7.15 and 4.73 pg m(-3) in the cold season and 21.2, 11.1 and 6.27 pg m(-3) in the warm season, respectively. In all samples, BDE-47 and BDE-99 were the dominant congeners. Absorption of PBDEs in the organic matter of particles appeared to drive their gas/particle partitioning, particularly in the cold season. The estimated average outdoor workday inhalation exposure to ∑12PBDE in the cold and the warm period followed the order: industrial site (288 and 299 pg day(-1)) > urban-traffic site (178 and 191 pg day(-1)) > urban-background site (58 and 63 pg day(-1)). The exposures to BDE-47, BDE-99, BDE-153 and ∑3PBDE via inhalation, for children outdoor worker and seniors were several orders of magnitude lower than their corresponding oral RfD values.

Spatial and seasonal variations of the chemical, mineralogical and morphological features of quasi-ultrafine particles (PM 0.49) at urban sites

Combining chemical and physical-structural information of particles is a key issue in PM investigations. Chemical, mineralogical, and morphological characterization of quasi-ultrafine particles (PM 0.49) was carried out at two urban sites of varying traffic-influence (roadside and urban background) in Thessaloniki, northern Greece, during the cold and the warm period of 2013. Bulk analyses of chemical species included organic and elemental carbon (OC, EC), water soluble organic carbon (WSOC), ionic species (NO3(-), SO4(2-), Cl(-), Na(+), NH4(+), K(+), Mg(2+), Ca(2+)) and trace elements (As, Ba, Cd, Cr, Cu, Fe, Pb, Mn, Ni, Zn, Pt, Pd, Rh, Ru, and Ir). X-ray diffractometry (XRD) was employed for the mineralogical analysis of PM 0.49 in order to identify and quantify amorphous and crystalline phases. In addition, scanning electron microscopy coupled with energy dispersive spectrometry (SEM-EDS) was employed for morphological characterization and elemental microanalysis of individual particles. Findings of this work could provide the basis for designing epidemiological and toxicity studies to mitigate population exposure to UFPs.

Chemical composition and source apportionment of PM10 and PM2.5 in different functional areas of Lanzhou, China

To elucidate the air pollution characteristics of northern China, airborne PM10 (atmospheric dynamic equivalent diameter ≤ 10 μm) and PM2.5 (atmospheric dynamic equivalent diameter ≤ 2.5 μm) were sampled in three different functional areas (Yuzhong County, Xigu District and Chengguan District) of Lanzhou, and their chemical composition (elements, ions, carbonaceous species) was analyzed. The results demonstrated that the highest seasonal mean concentrations of PM10 (369.48 μg/m(3)) and PM2.5 (295.42 μg/m(3)) were detected in Xigu District in the winter, the lowest concentration of PM2.5 (53.15 μg/m(3)) was observed in Yuzhong District in the fall and PM10 (89.60 μg/m(3)) in Xigu District in the fall. The overall average OC/EC (organic carbon/elemental carbon) value was close to the representative OC/EC ratio for coal consumption, implying that the pollution of Lanzhou could be attributed to the burning of coal. The content of SNA (the sum of sulfate, nitrate, ammonium, SNA) in PM2.5 in Yuzhong County was generally lower than that at other sites in all seasons. The content of SNA in PM2.5 and PM10 in Yuzhong County was generally lower than that at other sites in all seasons (0.24-0.38), indicating that the conversion ratios from precursors to secondary aerosols in the low concentration area was slower than in the area with high and intense pollutants. Six primary particulate matter sources were chosen based on positive matrix factorization (PMF) analysis, and emissions from dust, secondary aerosols, and coal burning were identified to be the primary sources responsible for the particle pollution in Lanzhou.

Polycyclic aromatic hydrocarbons (PAHs) at traffic and urban background sites of northern Greece: source apportionment of ambient PAH levels and PAH-induced lung cancer risk

Thirteen particle-phase PAHs, including nine >4-ring congeners [Benz[a]anthracene (BaAn), Chrysene (Chry), Benzo[b]fluoranthene (BbF), Benzo[k]fluoranthene (BkF), Benzo[e]pyrene (BeP), Benzo[a]pyrene (BaP), Dibenzo[a,h]anthracene (dBaAn), Benzo[g,h,i]perylene (BghiPe), Indeno(1,2,3-c,d)pyrene (IP)], listed by IARC (International Agency for Research on Cancer) as class 1, class 2A, and 2B carcinogens, plus four ≤ 4-ring congeners [Phenanthrene (Ph), Anthracene (An), Fluoranthene (Fl), Pyrene (Py)], were concurrently measured in inhalable and respirable particle fractions (PM10 and PM2.5) at a heavy-traffic and an urban background site in Thessaloniki, northern Greece, during the warm and the cold period of the year. Carcinogenic and mutagenic potencies of the PAH-bearing particles were calculated, and the inhalation cancer risk (ICR) for local population was estimated. Finally, Chemical Mass Balance (CMB) modeling was employed for the source apportionment of ambient PAH levels and the estimated lung cancer risk. Resulted inhalation cancer risk during winter was found to be equivalent in the city center and the urban background area suggesting that residential wood burning may offset the benefits from minor traffic emissions.

Redox activity and in vitro bioactivity of the water-soluble fraction of urban particulate matter in relation to particle size and chemical composition

Chemical and toxicological characterization of the water-soluble fraction of size-segregated urban particulate matter (PM) (<0.49, 0.49-0.97, 0.97-1.5, 1.5-3.0, 3.0-7.2 and >7.2 μm) was carried out at two urban sites, traffic and urban background, during the cold and the warm period. Chemical analysis of the water-soluble PM fraction included ionic species (NO3(-), SO4(2-), Cl(-), Na(+), NH4(+), K(+), Mg(2+), Ca(2+)), water-soluble organic carbon (WSOC), and trace elements (Al, As, Ba, Cd, Cr, Cu, Fe, Pb, Mn, Ni, Zn, Pt, Pd, Rh, Ru, Ir, Ca, and Mg). The dithiothreitol (DTT) assay was employed for the abiotic assessment of the oxidative PM activity. Cytotoxic responses were investigated in vitro by applying the mitochondrial dehydrogenase (MTT) and the lactate dehydrogenase (LDH) bioassays on human lung cells (MRC-5), while DNA damage was estimated by the single cell gel electrophoresis assay, known as Comet assay. The correlations between the observed bioactivity responses and the concentrations of water-soluble chemical PM constituents in the various size ranges were investigated. The results of the current study corroborate that short-term bioassays using lung human cells and abiotic assays, such as the DTT assay, could be relevant to complete the routine chemical analysis and to obtain a preliminary screening of the potential effects of PM-associated airborne pollutants on human health.

Review on recent progress in observations, source identifications and countermeasures of PM2.5

Recently, PM2.5 (atmospheric fine particulate matter with aerodynamic diameter ≤ 2.5 μm) have received so much attention that the observations, source appointment and countermeasures of it have been widely studied due to its harmful impacts on visibility, mood (mental health), physical health, traffic safety, construction, economy and nature, as well as its complex interaction with climate. A review on the PM2.5 related research is necessary. We start with summary of chemical composition and characteristics of PM2.5 that contains both macro and micro observation results and analysis, wherein the temporal variability of concentrations of PM2.5 and major components in many recent reports is embraced. This is closely followed by an overview of source appointment, including the composition and sources of PM2.5 in different countries in the six inhabitable continents based on the best available results. Besides summarizing PM2.5 pollution countermeasures by policy, planning, technology and ideology, the World Air Day is proposed to be established to inspire and promote the crucial social action in energy-saving and emission-reduction. Some updated knowledge of the important topics (such as formation and evolution mechanisms of hazes, secondary aerosols, aerosol mass spectrometer, organic tracers, radiocarbon, emissions, solutions for air pollution problems, etc.) is also included in the present review by logically synthesizing the studies. In addition, the key research challenges and future directions are put forward. Despite our efforts, our understanding of the recent reported observations, source identifications and countermeasures of PM2.5 is limited, and subsequent efforts both of the authors and readers are needed.

Ultrastructural alterations in the mouse lung caused by real-life ambient PM10 at urban traffic sites

Current levels of ambient air particulate matter (PM) are associated with mortality and morbidity in urban populations worldwide. Nevertheless, current knowledge does not allow precise quantification or definitive ranking of the health effects of individual PM components and indeed, associations may be the result of multiple components acting on different physiological mechanisms. In this paper, healthy Balb/c mice were exposed to ambient PM10 at a traffic site of a large city (Thessaloniki, northern Greece), in parallel to control mice that were exposed to filtered air. Structural damages were examined in ultrafine sections of lung tissues by Transmission Electronic Microscopy (TEM). Ambient PM10 samples were also collected during the exposure experiment and characterized with respect to chemical composition and oxidative potential. Severe ultrastructural alterations in the lung tissue after a 10-week exposure of mice at PM10 levels often exceeding the daily limit of Directive 2008/50/EC were revealed mainly implying PM-induced oxidative stress. The DTT-based redox activity of PM10 was found within the range of values reported for traffic sites being correlated with traffic-related constituents. Although linkage of the observed lung damage with specific chemical components or sources need further elucidation, the magnitude of biological responses highlight the necessity for national and local strategies for mitigation of particle emissions from combustion sources.

Temporal variations of PM1 major components in an urban street canyon

Seasonal changes in the levels of PM1 and its main components (organic carbon (OC), elemental carbon (EC), SO4 (2-), NO3 (-) and NH4 (+)) were studied in an urban street canyon in southeastern Spain. Although PM1 levels did not show an evident seasonal cycle, strong variations in the concentrations of its major components were observed. Ammonium sulfate, the main secondary inorganic compound, was found to be of regional origin. Its formation was favored during summer due to increased photochemical activity. In contrast, the concentrations of particulate ammonium nitrate, which is thermally unstable, were highest in winter. Although traffic emissions are the dominant source of EC in the city, variations in traffic intensity could not explain the seasonal cycle of this component. The higher EC concentrations during the cold months were attributed to the lower dispersion conditions and the increase in EC emissions. Special attention has been given to variations in organic carbon levels since it accounted for about one third of the total PM1 mass. The concentrations of both total OC and secondary OC (SOC) were maxima in winter. The observed seasonal variation in SOC levels is similar to that found in other southern European cities where the frequency of sunny days in winter is high enough to promote photochemical processes.

Spatial and seasonal variations of atmospheric particulate carbon fractions and identification of secondary sources at urban sites in North India

An intensive measurement campaign was undertaken to characterize eight fractions of organic carbon (OC) and elemental carbon (EC) in particulate matter (PM) at four urban sites with different pollution characteristics during summer, post-monsoon, and winter at Kanpur, India. Speciation samplers were used to collect particulate samples on quartz filters followed by analysis of OC and EC using Interagency Monitoring of Protected Visual Environments (IMPROVE)-based thermal/optical reflectance (TOR) method. Based on 24-h average results at each site, the highest levels of OC and EC were observed during winter as 96.7 ± 26.9 and 31.8 ± 9.8 μg/m(3) at residential site and traffic site, respectively. The levels of OC at residential sites during winter appeared to be more than twice of that during summer. The site close to the road traffic had the least value of OC/EC, as 1.77 ± 0.28 during post-monsoon, and the site influenced by emissions of domestic cooking and heating had the highest value of OC/EC, as 4.05 ± 0.79 during winter. The average abundances of OC1, OC2, OC3, OC4, OP, EC1, EC2, and EC3 in total carbon (TC) at all sites for three seasons were 10.03, 19.04, 20.03, 12.32, 10.53, 33.39, 3.21, and 1.99 %, respectively. A sharp increase in levels of OC1 and EC1-OP during winter at two residential sites revealed that biomass burning could be a significant contributor to carbonaceous aerosols. From the application of EC-tracer method, it was observed that contribution of secondary organic carbon (SOC) to PM mass increased from 5 % during post-monsoon to 16 % during winter at residential sites and from 2 % during post-monsoon to 7 % during winter at traffic sites. Therefore, it could be inferred that increase in primary emissions coupled with unfavorable meteorological conditions could cause particle agglomeration and hygroscopic growth, leading to unpleasant pollution episode during winter.

Size distribution of total and water-soluble fractions of particle-bound elements-assessment of possible risks via inhalation

The size distribution of total and water-soluble elemental concentrations in six particle sizes <0.49, 0.49-0.97, 0.97-1.5, 1.5-3.0, 3.0-7.2, and 7.2-30 μm was investigated in Thessaloniki area, N. Greece, at two sites representing urban-traffic and urban-background character during the cold and warm period. The elements As, Cd, Cr, Cu, Pb, Ni, Zn, Ru, and Ir exhibited their highest mass portion in the fine particle mode (0.97-1.5 μm), whereas Al, Ba, Ca, Fe, and Mn occurred predominately in the coarse particle mode (3.0-7.2 μm). The water-soluble elemental fractions exhibited significant spatiotemporal variations and particle size dependence. Possible non-carcinogenic and carcinogenic risks associated with inhalation of particle-bound elements based on total and water-soluble concentrations were in acceptable levels. However, the cumulative risk for all potential particle-bound constituents has to be considered.

Elements and polycyclic aromatic hydrocarbons in exhaust particles emitted by light-duty vehicles

The main purpose of this work was to evaluate the chemical composition of particulate matter (PM) emitted by eight different light-duty vehicles. Exhaust samples from petrol and diesel cars (Euro 3 to Euro 5) were collected in a chassis dynamometer facility. To simulate the real-world driving conditions, three ARTEMIS cycles were followed: road, to simulate a fluid traffic flow and urban with hot and cold starts, to simulate driving conditions in cities. Samples were analysed for the water-soluble ions, for the elemental composition and for polycyclic aromatic hydrocarbons (PAHs), respectively, by ion chromatography, inductively coupled plasma atomic emission spectroscopy (ICP-AES), inductively coupled plasma mass spectrometry (ICP-MS) and gas chromatography-mass spectrometry (GC-MS). Nitrate and phosphate were the major water-soluble ions in the exhaust particles emitted from diesel and petrol vehicles, respectively. The amount of material emitted is affected by the vehicle age. For vehicles ≥Euro 4, most elements were below the detection limits. Sodium, with emission factors in the ranges 23.5-62.4 and 78.2-227μg km(-1), for petrol and diesel Euro 3 vehicles, respectively, was the major element. The emission factors of metallic elements indicated that diesel vehicles release three to five times more than petrol automobiles. Element emissions under urban cycles are higher than those found for on-road driving, being three or four times higher, for petrol vehicles, and two or three times, for diesel vehicles. The difference between cycles is mainly due to the high emissions for the urban cycle with hot start-up. As registered for elements, most of the PAH emissions for vehicles ≥Euro 4 were also below the detection limits. Regardless of the vehicle models or driving cycles, the two- to four-ring PAHs were always dominant. Naphthalene, with emission factors up to 925 μg km(-1), was always the most abundant PAH. The relative cancer risk associated with naphthalene was estimated to be up to several orders of magnitude higher than any of the chemical species found in the PM phase. The highest PAH emission factors were registered for diesel-powered vehicles. The condition of the vehicle can exert a decisive influence on both element and PAH emissions.

One-year intensive characterization on PM2.5 nearby port area of Thessaloniki, Greece

The chemical characterization of particulate matter (PM) 2.5 fraction was studied during a 1-year sampling campaign conducted at a site near Thessaloniki's port area. PM2.5 collected samples were chemically analyzed for polycyclic aromatic hydrocarbons, minerals, and trace elements (Pb, Ni, Cu, V, Mn, Cr, Zn, Mg, K, Ti, Fe, Ca, and Al); water-soluble ions (Cl(-), NO3 (-), SO4 (2-), K(+), Na(+), NH4 (+), Mg(2+), Ca(2+)); and organic and elemental carbon. The average annual PM2.5 concentration (66.0 μg/m(3)) was at the highest level compared with other studies reported for the same city but different sampling sites. The average daily sum of the measured concentration of polycyclic aromatic hydrocarbons (PAHs) was 12.76 ng/m(3); this value decreased to 6.73 ng/m(3) for the warm period and reached the value of 19.8 ng/m(3) for the cold period. The average concentration of benzo[a]pyrene during the sampling period was 0.75 ng/m(3), which is below the European Union limit value of 1.0 ng/m(3). The ionic content comprised, on average, 22.6 % of the PM2.5 mass, with sulfate and ammonium being the most abundant species (31 and 26 %, respectively, of measured ions during the whole sampling period). The annual mean concentrations of organic carbon (OC) and elemental carbon (EC) were 10.5 ± 6.3 and 2.3 ± 1.5 μg/m(3), respectively. The OC/EC ratio ranged from 1.6 to 9.9, suggesting that there is a significant influence of residential wood burning for heating as well as ship and vehicle emissions to the sampling area. Finally, the elemental composition of associated PM2.5 was dominated by Ca, Fe, and Al. Although conclusions based only on PM2.5 measurements cannot entirely estimate all harbor sources' contribution, there is evidence to support that port activities affect the city's air quality and vice versa.