An overview of nanomaterials for industrial wastewater treatment

Ozone degradation of tetracycline hydrochloride enhanced by magnetic nanofluid composed of Fe3O4 nanoparticles

Magnetic Fe3O4 nanoparticles were added into the aqueous phase to form nanofluid systems, in which ozone was used for the oxidation of tetracycline hydrochloride (TC) in the solution. The nanomaterials were characterized using SEM, XRD, EDS, and FT-IR. The effects of nanoparticles size, addition ratio, and number of cycles on the process of ozone oxidation of TC were investigated. The results indicated that the addition ratio of nanoparticles have a certain impact on the performance of ozone oxidation. When the addition ratio increased from 0.02% to 0.4%, the removal rate of TC in the solution was improved significantly. Besides, the particle size of nanoparticles showed a greater impact on ozone oxidation. At the nanoscale, Fe3O4 nanoparticles exhibited significant strengthening properties, which is attributed to the construction of nanofluid systems. The removal rate of TC in solution decreased obviously with the increase of nanoparticles size. The Fe3O4 nanoparticles with particle size of 20 nm showed the most significant effect on TC degradation. The recycling experiment showed that magnetic Fe3O4 nanoparticles had stable regeneration performance. For three times of recycling treatment, with a Fe3O4 addition ratio of 0.4%, the removal rate of TC reached 98.7%, 97.21%, and 96%, respectively. Based on the characterization results, the strengthening mechanism was analyzed. The experimental results indicated that construction of nanofluids systems could improve the utilization rate of ozone, and Fe3O4 nanoparticles were reusable and easily recyclable.

Enhanced photocatalytic degradation of crystal violet and malachite green oxalate dyes by NiAg2O infused chitosan nanocomposites

The present study investigated the catalysis of Lupeol-loaded chitosan nanoparticles infused with NiAg2O nanoparticles to create a NiAg2O/Lup@CS nanocomposite. Recent advances in nanomaterials with unique architectures and functionalities have successfully treated contaminated soil and industrial wastewaters. Consequently, a lupeol@chitosan nanoparticle loaded with NiAg2O was created, and its catalytic effectiveness in degrading industrial dye pollution was examined. The ionic gelation synthesis route was used to produce the NiAg2O/Lup@CS nanocomposite. After that, the resultant nanocomposite underwent extensive analysis to determine its elemental composition through EDAX, surface bonding, nature, crystallinity using FTIR, FESEM, and XRD, and powdered particle size using HRTEM. Subsequently, the produced nanocomposite's efficacy in photo-catalytically degrading Crystal violet and Malachite green oxalate were evaluated. Moreover, the Crystal violet and Malachite green oxalate degradation kinetics were studied using the Langmuir-Hinshelwood model, which also offered a plausible photocatalytic process. The catalytic mechanism suggested that the addition of Lup@CS nanoparticles would have had the effect of speeding up photocurrent transport by increasing the quantity of electrons and holes produced by the photon's irradiation. This highlights the significance of creating innovative composite photocatalysts. The study also observed the superior photocatalytic activity of NiAg2O/Lup@CS nanocomposite with 86.14 % degradation of Crystal violet and 86.65 % degradation of Malachite green oxalate.

Integrated biological-chemical system for phenol removal from petrochemicals wastewater

Phenol is a highly concerning pollutant in petrochemical industrial wastewater. It is extremely poisonous, carcinogenic, and persistent, therefore, it bioaccumulates in the food chain reaching humans, where it causes acute irritation to the skin, eyes, and respiratory tract, as well as chronic effects on the liver, kidneys, and nervous system. It spills or leaks easily into surface water or groundwater sources, leading to the creation of other harmful substituted compounds. Therefore, the present study aimed to design an integrated biological-chemical system (phenol degrader(s) and nanoparticle assemblage) for the efficient removal of phenolic compounds from wastewater of a poly-vinyl chloride production unit at a petrochemical company in Alexandria. Ten indigenous microbial isolates were obtained from phenol-contaminated wastewater and purified. Two fungal isolates were excluded, and eight bacterial isolates were screened for their efficiency in the degradation and removal of phenol. Three isolates (Stutzerimonas chloritidismutans strain AW-1 (A2), Stutzerimonas stutzeri ATCC 17588 = LMG 11199 (A4), and Arthrobacter ruber strain MDB1-42 (A9)) proved to be the most promising candidate(s) and were investigated as individual and mixed cultures. The mixed culture (A2, A4, and A9) proved to be the most efficient, and could achieve 98.85, 31.08, 45.83, and 45.83% removal of phenol, chemical oxygen demand (COD), biochemical oxygen demand (BOD), and total dissolved solids (TDS), respectively (all below their maximum permissible limits (MPLs)), for discharge or reuse. The bacterial consortium was decorated with the synthesized and characterized Fe3O4 Nanoparticles (NPs) at 1:3 (g/g), the optimum ratio for coating and immobilization (94.22%) of the bacterial consortium. Fe3O4 NP/bacteria assembly (trial 1) showed the highest RE of 20, 56.66, 47.06, 25.16, and 96.78% for TDS, total suspended solids (TSS), BOD, COD, and phenol, respectively, all after only 1 h except TSS (2 h), compared to the treatment with undecorated bacterial consortium (trial 2) or bacteria-free Fe3O4 NPs (trial 3). It is concluded that the proposed treatment system (Fe3O4 NP/bacterial assembly) is an extraordinarily effective, practical, quick, clean, renewable, long-lasting, ecologically friendly, and simply implemented technology for remediating phenol-contaminated wastewater compared to other conventional treatment methods. Concerning TSS, COD, and phenol residues that are still higher than their MPLs, it can be easily overcome by increasing the exposure (contact) time or the dose of the Fe3O4 NP/bacterial assembly, using multiple units of the proposed treatment in sequence, or fixing the decorated bacteria as a biofilm system and treating the effluent in a continuous mode.

Pharmaceutical Removal with Photocatalytically Active Nanocomposite Membranes

The advancement of pharmaceutical science has resulted in the development of numerous tailor-made compounds, i.e., pharmaceuticals, tuned for specific drug targets. These compounds are often characterized by their low biodegradability and are commonly excreted to a certain extent unchanged from the human body. Due to their low biodegradability, these compounds represent a significant challenge to wastewater treatment plants. Often, these compounds end up in effluents in the environment. With the advancement of membrane technologies and advanced oxidation processes, photocatalysis in particular, a synergistic approach between the two was recognized and embraced. These hybrid advanced water treatment processes are the focus of this review, specifically the removal of pharmaceuticals from water using a combination of a photocatalyst and pressure membrane process, such as reverse osmosis or nanofiltration employing photocatalytic nanocomposite membranes.

Performance improvement of triple-doped nanocomposite membrane towards hairwork dyeing effluent reclamation approaching zero liquid discharge

It is highly anticipated that efforts will be made to raise the level of industrial effluent reclamation on the background of continuously minimizing waste stream based on preconcentration tool. For this purpose, a triple-doped nanocomposite (TFN-tri) membrane through partially alternative doping spiro-structured 2,2'-dimethyl-1,1'-biphenyl-4,4'-diamine dihydrochloride and flexible 4,4'-bipiperidyl dihydrochloride and continuous incorporating of molybdenum disulfide quantum dots was successfully fabricated. With the assistance of self-synthesized biodegradable flocculant pretreatment, raw hairwork dyeing effluent (HDE) was stably recycled up to 95.1% on the premise of meeting the requirements of the relevant national standard. As a deep processing unit, TFN-tri membrane displayed accurate salt rejection of nearly 66% as expected. More impressively, it also exhibited permeability basically increased by 2.5 folds, while fouling layer thickness, running time and specific energy consumption decreased by 5 μm, 54.7% and 72.5%, respectively, than its counterpart in long-term reuse testing. These changes may mainly be due to the finely expand sub-nanopores coupled with an enhanced electrostatic exclusion and the improved fouling resistance brought about by other critical skin features in terms of smoothness and hydrophilicity optimization. In brief, this study has taken a vigorous and reliable step towards heavily polluted HDE reclamation approaching zero liquid discharge.

Modification of cellulose with TiO2 nanoparticles: Potential solar driven photocatalyst and adsorbent

In-situ modification of cellulose fibers with titania nanoparticles (TiO2 NPs) (TiO2 NPs-cellulose) was carried out via the sol-gel process using titania sol and fibers of cellulose. Cellulose fibers were extracted from wheat straw, an agricultural waste material, whereas titania sol was prepared from titanium(IV) acetoximate, [Ti{ONC(CH3)2}4]. The synthesized TiO2 NPs-cellulose composite was characterized by FT-IR, SEM-EDX, and XRD analyses. The obtained results exposed that TiO2 NPs were homogeneously dispersed over the surface of cellulose fibers. A study was conducted to compare the photocatalytic activities of TiO2 NPs-cellulose composite and TiO2 NPs towards the degradation of methylene blue and methyl orange dyes under sunlight, and it was observed that the photo-degradation of methylene blue (99.99%) and methyl orange (80.73%) within 160 min is higher in the presence of TiO2 NPs-cellulose composite than TiO2 NPs. The adsorption capabilities of TiO2 NPs-cellulose composite towards Pb2+, Cd2+, and Cr3+ toxic metal ions were also examined, and it was found 44.73 mg. g-1 (89.46%), 38.82 mg. g-1 (77.65%), and 4.42 mg. g-1 (8.85%), respectively. Removal of pollutants from textile industrial effluent were also investigated using TiO2 NPs-cellulose composite under sun light. The results obtained were very promising which shows potential of TiO2 NPs-cellulose composite as an efficient photocatalyst and absorbent for real time applications.

Graphical abstract

Supplementary Information

The online version contains supplementary material available at 10.1007/s40201-023-00884-9.

Microbial nanotechnology for agriculture, food, and environmental sustainability: Current status and future perspective

The field of nanotechnology has the mysterious capacity to reform every subject it touches. Nanotechnology advancements have already altered a variety of scientific and industrial fields. Nanoparticles (NPs) with sizes ranging from 1 to 100 nm (nm) are of great scientific and commercial interest. Their functions and characteristics differ significantly from those of bulk metal. Commercial quantities of NPs are synthesized using chemical or physical methods. The use of the physical and chemical approaches remained popular for many years; however, the recognition of their hazardous effects on human well-being and conditions influenced serious world perspectives for the researchers. There is a growing need in this field for simple, non-toxic, clean, and environmentally safe nanoparticle production methods to reduce environmental impact and waste and increase energy productivity. Microbial nanotechnology is relatively a new field. Using various microorganisms, a wide range of nanoparticles with well-defined chemical composition, morphology, and size have been synthesized, and their applications in a wide range of cutting-edge technological areas have been investigated. Green synthesis of the nanoparticles is cost-efficient and requires low maintenance. The present review highlights the synthesis of the nanoparticles by different microbes, their characterization, and their biotechnological potential. It further deals with the applications in biomedical, food, and textile industries as well as its role in biosensing, waste recycling, and biofuel production.

Effective treatment of petroleum oil-contaminated wastewater using activated sludge modified with magnetite/silicon nanocomposite

The study aimed to optimize the treatment of oil refinery-contaminated wastewater through modification of the well-established activated sludge process with new nanocomposite (NC) materials to produce high-quality treated effluents for potential reuse. Refinery wastewater samples were collected from one of the major oil refineries, Alexandria, Egypt, where the operation, performance, and efficiency of the current activated sludge (AS) unit were evaluated for 6 consecutive months. Two AS bench scale PVC basins were constructed. Magnetite nanoparticles (Fe3O4 NPs) and magnetite silica (Fe3O4/silica) nanocomposite (NC) were prepared and characterized. Bioremediation trials were carried out in a sequential batch mode using Fe3O4/silica NC-modified AS and control (unmodified AS). The proposed treatment produced high-quality effluents in a very short time (2 h) despite the very high initial pollutant concentration accompanied with a reduction in the produced sludge. The highest removal of TSS, TDS, BOD, COD, and OG from raw industrial wastewater recorded 78.33, 3.6, 87.65, 85.17, and 92.92% compared to 55.3, 12.6, 50.0, 40.22, and 56.84%, respectively, achieved by the unmodified AS unit. The results confirmed that integration of the AS treatment with nanomaterial composite is highly effective, promising, and economic for the treatment of highly toxic and complicated industrial wastewater such as petroleum refinery effluents.

Natural-based coagulants/flocculants as sustainable market-valued products for industrial wastewater treatment: a review of recent developments

Industrial wastewater is categorized as a voracious consumer of fresh water and a high-strength source of pollution. Coagulation-flocculation is a simple and cost-effective technique for removing organic/inorganic compounds and colloidal particles from industrial effluents. Despite the outstanding natural properties, biodegradability, and efficacy of natural coagulants/flocculants (NC/Fs) in industrial wastewater treatment, their significant potential to remediate such effluents is underappreciated, particularly in commercial scale applications. Most reviews on NC/Fs focused on the possible application of plant-based sources such as plant seeds, tannin, certain vegetables/fruit peels, and their lab-scale potential. Our review expands the scope by examining the feasibility of using natural materials from other sources for industrial effluent decontamination. By analyzing the latest data on NC/Fs, we identify the most promising preparation techniques for making these materials stable enough to compete with traditional options in the marketplace. An interesting presentation of the results of various recent studies has also been highlighted and discussed. Additionally, we highlight the recent success of using magnetic-natural coagulants/flocculants (M-NC/Fs) in treating diverse industrial effluents, and discuss the potential for reprocessing spent materials as a renewable resource. The review also offers different concepts for suggested large-scale treatment systems used by MN-CFs.

Characterization and cytotoxicity assessment of cadmium sulfide quantum dots synthesized with Fusarium oxysporum f. sp. lycopersici

The potential of CdS quantum dots for biomedical and bioimaging applications depends on their cytotoxicity, which can be modulated by coating molecules. Using sulfur as a precursor can be used along with cadmium nitrate to synthesize CdS quantum dots with the fungus Fusarium oxysporum f. sp. lycopersici. The latter replaces pure chemical sulfur as a precursor for CdS quantum dot synthesis, thus transforming waste into a value-added product, increasing sustainability, reducing the environmental impact of the process through the implementation of green synthesis techniques, and contributing to the circular economy. Therefore, we compared the cytotoxicity on HT-29 cells of biogenic, and chemical CdSQDs, synthesized by a chemical method using pure sulfur. Biogenic and chemical CdSQDs had diameters of 4.08 ± 0.07 nm and 3.2 ± 0.20 nm, Cd/S molar ratio of 43.1 and 1.1, Z-potential of - 14.77 ± 0.64 mV and - 5.52 ± 1.11 mV, and hydrodynamic diameters of 193.94 ± 3.71 nm and 152.23 ± 2.31 nm, respectively. The cell viability improved 1.61 times for biogenic CdSQDs over chemical CdSQDs, while cytotoxicity, measured as IC50, diminished 1.88-times. The lower cytotoxicity of biogenic CdSQDs was attributed to their organic coating consisting of lipids, amino acids, proteins, and nitrate groups that interacted with CdS through -OH and -SH groups. Therefore, the biogenic synthesis of CdSQDs has repurposed a pathogenic fungus, taking advantage of the biomolecules it secretes, to transform hazardous sulfur waste and metal ions into stable CdSQDs with advantageous structural and cytotoxic properties for their potential application in biomedicine and bioimaging.

Nanotechnology as an efficient and effective alternative for wastewater treatment: an overview

The increase in the surface and groundwater contamination due to global population growth, industrialization, proliferation of pathogens, emerging pollutants, heavy metals, and scarcity of drinking water represents a critical problem. Because of this problem, particular emphasis will be placed on wastewater recycling. Conventional wastewater treatment methods may be limited due to high investment costs or, in some cases, poor treatment efficiency. To address these issues, it is necessary to continuously evaluate novel technologies that complement and improve these traditional wastewater treatment processes. In this regard, technologies based on nanomaterials are also being studied. These technologies improve wastewater management and constitute one of the main focuses of nanotechnology. The following review describes wastewater's primary biological, organic, and inorganic contaminants. Subsequently, it focuses on the potential of different nanomaterials (metal oxides, carbon-based nanomaterials, cellulose-based nanomaterials), membrane, and nanobioremediation processes for wastewater treatment. The above is evident from the review of various publications. However, nanomaterials' cost, toxicity, and biodegradability need to be addressed before their commercial distribution and scale-up. The development of nanomaterials and nanoproducts must be sustainable and safe throughout the nanoproduct life cycle to meet the requirements of the circular economy.

A hypothetical model of multi-layered cost-effective wastewater treatment plant integrating microbial fuel cell and nanofiltration technology: A comprehensive review on wastewater treatment and sustainable remediation

Wastewater management has emerged as an uprising concern that demands immediate attention from environmentalists worldwide. Indiscriminate and irrational release of industrial and poultry wastes, sewage, pharmaceuticals, mining, pesticides, fertilizers, dyes and radioactive wastes, contribute immensely to water pollution. This has led to the aggravation of critical health concerns as evident from the uprising trends of antimicrobial resistance, and the presence of xenobiotics and pollutant traces in humans and animals due to the process of biomagnification. Therefore, the development of reliable, affordable and sustainable technologies for the supply of fresh water is the need of the hour. Conventional wastewater treatment often involves physical, chemical, and biological processes to remove solids from the effluent, including colloids, organic matter, nutrients, and soluble pollutants (metals, organics). Synthetic biology has been explored in recent years, incorporating both biological and engineering concepts to refine existing wastewater treatment technologies. In addition to outlining the benefits and drawbacks of the current technologies, this review addresses novel wastewater treatment techniques, especially those using dedicated rational design and engineering of organisms and their constituent parts. Furthermore, the review hypothesizes designing a multi-bedded wastewater treatment plant that is highly cost-efficient, sustainable and requires easy installation and handling. The novel setup envisages removing all the major wastewater pollutants, providing water fit for household, irrigation and storage purposes.

Exploring Microbial-Based Green Nanobiotechnology for Wastewater Remediation: A Sustainable Strategy

Water scarcity due to contamination of water resources with different inorganic and organic contaminants is one of the foremost global concerns. It is due to rapid industrialization, fast urbanization, and the low efficiency of traditional wastewater treatment strategies. Conventional water treatment strategies, including chemical precipitation, membrane filtration, coagulation, ion exchange, solvent extraction, adsorption, and photolysis, are based on adopting various nanomaterials (NMs) with a high surface area, including carbon NMs, polymers, metals-based, and metal oxides. However, significant bottlenecks are toxicity, cost, secondary contamination, size and space constraints, energy efficiency, prolonged time consumption, output efficiency, and scalability. On the contrary, green NMs fabricated using microorganisms emerge as cost-effective, eco-friendly, sustainable, safe, and efficient substitutes for these traditional strategies. This review summarizes the state-of-the-art microbial-assisted green NMs and strategies including microbial cells, magnetotactic bacteria (MTB), bio-augmentation and integrated bioreactors for removing an extensive range of water contaminants addressing the challenges associated with traditional strategies. Furthermore, a comparative analysis of the efficacies of microbe-assisted green NM-based water remediation strategy with the traditional practices in light of crucial factors like reusability, regeneration, removal efficiency, and adsorption capacity has been presented. The associated challenges, their alternate solutions, and the cutting-edge prospects of microbial-assisted green nanobiotechnology with the integration of advanced tools including internet-of-nano-things, cloud computing, and artificial intelligence have been discussed. This review opens a new window to assist future research dedicated to sustainable and green nanobiotechnology-based strategies for environmental remediation applications.

Nanomaterials as a sustainable choice for treating wastewater

Wastewater containing toxic substances is a major threat to the health of both aquatic and terrestrial ecosystems. In order to treat wastewater, nanomaterials are currently being studied intensively due to their unprecedented properties. The unique features of nanoparticles are prompting an increasing number of studies into their use in wastewater treatment. Although several studies have been undertaken in recent years, most of them did not focus on some of the nanomaterials that are now often utilized for wastewater treatment. It is essential to investigate the most recent advances in all the types of nanomaterials that are now frequently employed for wastewater treatment. The recent advancements in common nanomaterials used for sustainable wastewater treatment is comprehensively reviewed in this paper. This paper also thoroughly assesses unique features, proper utilization, future prospects, and current limitations of green nanotechnology in wastewater treatment. Zero-valent metal and metal oxide nanoparticles, especially iron oxides were shown to be more effective than traditional carbon nanotubes (CNTs) for recovering heavy metals in wastewater. Iron oxide achieved 75.9% COD (chemical oxygen demand) removal efficiency while titanium oxide (TiO₂) achieved 75.5% COD. Iron nanoparticles attained 72.1% methyl blue removal efficiency. However, since only a few types of nanomaterials have been commercialized, it is important to also focus on the economic feasibility of each nanomaterial. This study found that the large surface area, high reactivity, and strong mechanical properties of nanoparticles means they can be considered as a promising option for successful wastewater treatment.

Photocatalytic Investigation of Aerosol-Assisted Atmospheric Pressure Plasma Deposited Hybrid TiO2 Containing Nanocomposite Coatings

We report on the aerosol-assisted atmospheric-pressure plasma deposition onto a stainless-steel woven mesh of a thin nanocomposite coating based on TiO2 nanoparticles hosted in a hybrid organic−inorganic matrix, starting from nanoparticles dispersed in a mixture of hexamethyldisiloxane and isopropyl alcohol. The stainless-steel mesh was selected as an effective support for the possible future technological application of the coating for photocatalytically assisted water depollution. The prepared coatings were thoroughly investigated from the chemical and morphological points of view and were demonstrated to be photocatalytically active in the degradation of an organic molecule, used as a pollutant model, in water upon UV light irradiation. In order to optimize the photocatalytic performance, different approaches were investigated for the coating’s realization, namely (i) the control of the deposition time and (ii) the application of a postdeposition O2 plasma treatment on the pristine coatings. Both strategies were found to be able to increase the photocatalytic activity, and, remarkably, their combination resulted in a further enhancement of the photoactivity. Indeed, the proposed combined approach allowed a three-fold increase in the kinetic constant of the degradation reaction of the model dye methylene blue with respect to the pristine coating. Interestingly, the chemical and morphological characterizations of all the prepared coatings were able to account for the enhancement of the photocatalytic performance. Indeed, the presence of the TiO2 nanoparticles on the outmost surface of the film confirmed the accessibility of the photocatalytic sites in the nanocomposite and reasonably explained the enhanced photocatalytic performance. In addition, the sustained photoactivity (>5 cycles of use) of the nanocomposites was demonstrated.

Biosolids: The Trojan horse or the beautiful Helen for soil fertilization?

The simultaneous requirement to manage resources and wastes in more rational way has meant that many communities worldwide have begun to search for long-term alternative solutions. Reuse and recovery of biosolids is considered to be a constant solution of circular sustainability, as waste disposal without further reuse background like fertilizer is no longer an alternative to be promoted. There have been developed many treatment methods over the years for the stabilization and sanitization of biosolids. However, the literature concludes that none of them is fully integrated by meeting all the basic criteria. Each method has its Achilles heel, and the appropriateness of the method lies in what is the goal each time. There are conventional methods with positive reciprocity in terms of sustainability, reuse indicators and technological maturity, but have high risk of microorganisms' reappearance. New advanced sustainable technologies, such as cold plasma, need to be further studied to apply on a large scale. The reuse of biosolids as construction materials is also discussed in the context of circular economy. Biosolids reuse and management legislation frame need to be revised, as a directive adopted 30 years ago does not fully meet communities' current needs.

Single-step green synthesis of gold conjugated polyphenol nanoparticle using extracts of Saudi's myrrh: Their characterization, molecular docking and essential biological applications

The progress in the innovative nanocrystal synthesis process by using environmentally benign and low-priced nontoxic chemicals, solvents, and renewable sources remains a challenging task for researchers worldwide. The majority of the existing synthesis techniques engage in the potentially dangerous, for either human health or the environment. Current investigation has been centered on green synthesis processes to create novel nanomaterials, which are eco-friendly as well as safer for sustainable marketable feasibility. The current work provides the green synthesis method for gold nanoparticle (GNPs) synthesis using Commiphora myrrh (C.myrrh) extract. This simple method includes 6 ml of HAuCl4·3H2O treated with 4 ml C.myrrh extract having pH 4.5 after 80 min at 25 °C temperature. In this novel method, green synthesized GNPs characterized by UV-Vis, X_ray diffraction spectroscopy (XRD), zeta potential, fourier transform infrared (FT_IR), high_resolution transmission electron microscopy (HR_TEM), energy dispersive X_ray spectroscopy (EDXA), and dynamic light scattering (DLS). During the development successful antioxidant assay, the DPPH assay was applied. The cell toxicity of green synthesized GNPs was evaluated following an MTT assay against HCT-116 (colon cancer) and MCF-7 (breast cancer). Besides molecular docking in the δ-elemene for inhibitor to VEGFR-2 domain revealed more negative docking score (-3.976) which is an excellent binding affinity to the C.myrrh@GNP. The synthesized GNPs showed antidiabetic, antibiotic, and antibacterial properties and anti_inflammatory inhibition against inhibiting COX-1, and COX-2 enzymes. In addition, molecular docking by Lindestrene (-3.806) and Furanoeudesma-1,3-dien (-3.912) against COX1 and COX2 respectively showed strong binding affinity. The molecular docking study evidenced the anti-inflammatory and cell toxicity study.

Nano-Structured Carbon: Its Synthesis from Renewable Agricultural Sources and Important Applications

Carbon materials are versatile in nature due to their unique and modifiable surface and ease of production. Nanostructured carbon materials are gaining importance due to their high surface area for application in the energy, biotechnology, biomedical, and environmental fields. According to their structures, carbon allotropes are classified as carbon nanodots, carbon nanoparticles, graphene, oxide, carbon nanotubes, and fullerenes. They are synthesized via several methods, including pyrolysis, microwave method, hydrothermal synthesis, and chemical vapor deposition, and the use of renewable and cheaper agricultural feedstocks and reactants is increasing for reducing cost and simplifying production. This review explores the nanostructured carbon detailed investigation of sources and their relevant reports. Many of the renewable sources are covered as focused here, such as sugar cane waste, pineapple, its solid biomass, rise husk, date palm, nicotine tabacum stems, lapsi seed stone, rubber-seed shell, coconut shell, and orange peels. The main focus of this work is on the various methods used to synthesize these carbon materials from agricultural waste materials, and their important applications for energy storage devices, optoelectronics, biosensors, and polymer coatings.

Surface Functionalized MXenes for Wastewater Treatment-A Comprehensive Review

Over 80% of wastewater worldwide is released into the environment without proper treatment. Whilst environmental pollution continues to intensify due to the increase in the number of polluting industries, conventional techniques employed to clean the environment are poorly effective and are expensive. MXenes are a new class of 2D materials that have received a lot of attention for an extensive range of applications due to their tuneable interlayer spacing and tailorable surface chemistry. Several MXene-based nanomaterials with remarkable properties have been proposed, synthesized, and used in environmental remediation applications. In this work, a comprehensive review of the state-of-the-art research progress on the promising potential of surface functionalized MXenes as photocatalysts, adsorbents, and membranes for wastewater treatment is presented. The sources, composition, and effects of wastewater on human health and the environment are displayed. Furthermore, the synthesis, surface functionalization, and characterization techniques of merit used in the study of MXenes are discussed, detailing the effects of a range of factors (e.g., PH, temperature, precursor, etc.) on the synthesis, surface functionalization, and performance of the resulting MXenes. Finally, the limits of MXenes and MXene-based materials as well as their potential future research directions, especially for wastewater treatment applications are highlighted.

A critical review on clay-based nanocomposite particles for application of wastewater treatment

Nanotechnology plays an important function in recent environmental aspects for the elimination of contaminants in the ecosystem. In recent times, nano-clay has initiated more concentration because of its distinctive physicochemical properties and characteristics. Recently, many types of research in clay-based nanocomposite were accomplished in the elimination of pollutants from water sources. Nanocomposite materials have advanced properties useful for contaminat removal such as higher surface area, thermal stability, selectivity to remove different contaminants, improved process ability, and fast decontamination. Thus, the development of clay-based composite materials is one of the upcoming directions to use effectively in water and wastewater treatment as adsorbent nanomaterials. This paper assesses the latest achievement in clay-based nanocomposite preparation, material property analysis and function for various pollutant removals. In particular, great consideration was paid to the recent progress in clay/metallic, clay-polymer, and clay-carbon composites presenting their application in the removal of different kinds of pollutants. Moreover, the mechanism of adsorption, the challenges and future perspective were also discussed to reach the optimum performance of the nanomaterials adsorbent. It is confirmed that clay-based nanocomposite materials are more cost-effective technology than conventional treatment methods.

Tuning the Properties of Ba-M Hexaferrite BaFe11.5Co0.5O19: A Road Towards Diverse Applications

The development of hexaferrite nanoparticles is scrutinized as potential sorbents for the removal of chromium (Cr) ions from aqueous chromium-containing solutions in a batch adsorption experiment. The transition metal Co doped BaFe12O19 hexaferrite compounds (BHF) have been synthesized successfully via citrate auto combustion technique. The structure, surface morphology and magnetic properties of the samples were studied. X-ray diffraction pattern ratifies the existence of hexagonal phase as a main phase for the prepared samples. The average crystallite sizes are found in the range of 47–49 nm. The high-resolution transmission electron microscopy (HRTEM), as well as the Fourier, transform infrared spectrophotometry results confirm an M-type hexagonal structure existing. The χ-T indicates the temperature-dependent ferromagnetic behavior of BHF nanoparticles. The derivative shows a single transition temperature Tc at 698 °C, and 710 °C for BHF and BCHF respectively. The prepared samples are utilized as an adsorbent for the removal of Cr (VI) from the aqueous solution. The maximum adsorption capacity (qm) of Cr (VI) on the nano hexaferrite is higher than that of various other adsorbents testified in the literature. The pseudo-second-order kinetic model gives a better fit to the experimental data.

Novel benzylphosphate-based covalent porous organic polymers for the effective capture of rare earth elements from aqueous solutions

It has been a major challenge to develop stable and cost-effective porous materials that efficiently recover heavy rare earth elements (HREEs) due to ever-increasing demand, low availability and high cost of HREEs. This study presents two novel benzylphosphate-based covalent porous organic polymers (BPOP-1 and BPOP-2) that were prepared by facile one-pot Friedel-Crafts reactions. Various analytical techniques are used to investigate the successful syntheses of BPOP materials and establish their material properties, which include an unusual crystalline nature, large surface area, hierarchical pore structure, and superior chemical stabilities. The BPOPs effectively adsorb, and thus remove HREEs from aqueous media. In particular, BPOP-1 had higher phosphate content and exhibits superior adsorption capacities (Eu³⁺: 289.5; Gd³⁺: 292.7; Tb³⁺: 294.4; Dy³⁺: 301.9 mg/g) than BPOP-2, while BPOP-2 had higher mesoporosity and correspondingly supports faster adsorption kinetics. Remarkably, both BPOP materials exhibit some of the highest HREE adsorption capacities reported to date, the selective capture of Dy³⁺ ions, and excellent cyclic adsorption/desorption properties. We provide a potential adsorption mechanism for Dy³⁺ capture by the BPOP adsorbent. These demonstrate that introducing phosphate functionality into a robust porous polymer backbone with high surface area is a promising strategy for selective HREEs capture from wastewater.

Technology status and trends of industrial wastewater treatment: A patent analysis

Globally, 80% of wastewater, among which 28% came from industry, returned to the ecosystem without treatment or reuse. The discharge of industrial wastewater poses public health and environmental concerns. The necessity and urgency of industrial wastewater treatment (IWT) will bring great challenges to most countries. This paper conducted the patent analysis combined with text mining to quantitatively analyze 11,840 patents related to IWT in the Derwent Innovations Index database. The results showed that: From 1973 to 2020, the number of patents related to IWT annually was increasing consistently. China ranked first in the number of patent publications. In contrast, the United States and some patent organizations, such as World Intellectual Property Organization, produced fewer patents, while they played more important roles in knowledge transfer. The core technology analysis suggested that method, device, material and related industry were hot topics. From activated sludge treatment technology, industrial wastewater treatment technology had gone through a development process from single technology treatment to combined technologies treatment. In the foreseeable future, research on devices for physical treatment, advanced oxidation processes, automated and energy-saving treatment systems were the promising directions.

Nano-sized hematite-assembled carbon spheres for effectively adsorbing paracetamol in water: Important role of iron

This study developed a new α-Fe2O3 (hematite) nanoparticles-loaded spherical biochar (H-SB) through the direct pyrolysis of glucose-derived spherical hydrochar and FeCl3. The optimal impregnation ratio (hydrochar and FeCl3) was 1/1.25 (wt/wt). H-SB was applied to remove paracetamol (PRC) from water. Results indicated that H-SB exhibited a relatively low surface area (127 m2/g) and total pore volume (0.089 cm3/g). The presence of iron particles in its surface was confirmed by scanning electron microscopy with energy dispersive spectroscopy. The dominant form of iron nanoparticles (α-Fe2O3) in its surface was confirmed by X-ray powder diffraction and Raman spectrum. The crystallite size of α-Fe2O3 in H-SB was 27.4 nm. The saturation magnetization of H-SB was 6.729 cmu/g. The analysis of Fourier-transform infrared spectroscopy demonstrated that the C-O and O-H groups were mainly responsible for loading α-Fe2O3 nanoparticles in its surface. The adsorption study indicated the amount of PRC adsorbed by H-SB slightly decreased within solution pH from 2 to 11. The adsorption reached a fast saturation after 120 min. The Langmuir maximum adsorption capacity of H-SB was 49.9 mg/g at 25 °C and pH 7.0. Ion-dipole interaction and π-π interaction played an important role in adsorption mechanisms, while hydrogen bonding and pore filling were minor. Therefore, H-SB can serve as a promising material for treating PRC-contaminated water streams.

ELECTRONIC SUPPLEMENTARY MATERIAL

Supplementary material is available in the online version of this article at 10.1007/s11814-021-1013-z.

Recent advances in dye and metal ion removal using efficient adsorbents and novel nano-based materials: an overview

Excessive levels of dyes and heavy metals in water sources have long been a source of concern, posing significant environmental and public health threats. However, adsorption is a feasible technique for removing dye contaminants and heavy metals from water due to its high efficiency, cost-effectiveness, and easy operation. Numerous researchers in batch studies extensively evaluated various adsorbents such as natural materials, and agriculture-derived and industrial wastes; however, large-scale application is still missing. Nanotechnology is a novel approach that has arisen as one of the most versatile and cost-effective ways for dye and heavy metal removal. Its promotion on large-scale applications to investigate technological, fiscal, and environmental aspects for wastewater decontamination is particularly important. This review critically reviews wastewater treatment techniques, emphasizing the adsorption process and highlighting the most effective parameters: solution pH, adsorbent dosage, adsorbent particle size, initial concentration, contact time, and temperature. In addition, a comprehensive, up-to-date list of potentially effective low-cost adsorbents and nano-sorbents for the removal of dyes and heavy metals has been compiled. Finally, the challenges towards the practical application of the adsorption process based on various adsorbents have been drawn from the literature reviewed, and our suggested future perspectives are proposed.

Applications of metallic nanomaterials for the treatment of water

Water scarcity is not a novel issue. It has already affected almost every continent in this blue planet. It is driven by two primary sources: increasing demand for fresh water due to the increase in population and overexhaustion of the available freshwater resources. During the past decade, stress has been given to extract fresh, clean and safe potable elixir of life from the bountiful stores of sea water by exploiting various technologies. As nanomaterials are providing promising solutions to almost all our problems, they are again being accessed in order to combat the problem of global freshwater scarcity. Desalination methods have marvellously improved under the impact of nanomaterials. Different metallic nanomaterials are being used to serve this purpose; for example, silver, iron, zinc, titanium dioxide in addition to natural and synthetically derived polymeric bionanomaterials. In the present paper, a brief account of all the metallic nanomaterials which are being used for treatment of water has been provided by thorough investigation on the research done till now. It strives to throw light on various materials and methods which are based on the exploitation of nanotechnology for the treatment of water.

Green Synthesis of Metallic Nanoparticles Using Some Selected Medicinal Plants from Southern Africa and Their Biological Applications

The application of metallic nanoparticles (MNPs), especially that of silver, gold, cobalt, and zinc as antimicrobial, anticancer, drug delivery, contrast, and bioimaging agents has transformed the field of medicine. Their functions, which are attributed to their physicochemical properties, have gained prominence in various technological fields. Although MNPs can be produced via rigorous physical and chemical techniques, in recent years, a biological approach utilizing natural materials has been developed. With the increasing enthusiasm for safe and efficient nanomaterials, the biological method incorporating microorganisms and plants is preferred over physical and chemical methods of nanoparticle synthesis. Of these bio-entities, plants have received great attention owing to their capability to reduce and stabilize MNPs in a single one-pot protocol. South Africa is home to ~10% of the world's plant species, making it a major contributor to the world's ecological scenery. Despite the documented contribution of South African plants, particularly in herbal medicine, very few of these plants have been explored for the synthesis of the noble MNPs. This paper provides a review of some important South African medicinal plants that have been utilized for the synthesis of MNPs. The enhanced biological properties of the biogenic MNPs attest to their relevance in medicine. In this endeavour, more of the African plant biodiversity must be explored for the synthesis of MNPs and be validated for their potential to be translated into future nanomedicine.

Study of ZnO-CNT Nanocomposites in High-Pressure Conditions

Recently, carbon nanotubes (CNTs) have been used extensively to develop new materials and devices due to their specific morphology and properties. The reinforcement of different metal oxides such as zinc oxide (ZnO) with CNT develops advanced multifunctional materials with improved properties. Our aim is to obtain ZnO-CNT nanocomposites by in situ hydrothermal method in high-pressure conditions. Various compositions were tested. The structure and morphology of ZnO-CNT nanocomposites were analyzed by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry—thermogravimetry (DSC-TG), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), and transmission electron microscopy (TEM). These analyses showed the formation of complex ZnO-CNT structures. FT-IR spectra suggest possible interactions between CNT and ZnO. DSC-TG analysis also reveals the formation of some physical bonds between ZnO and CNT, through the appearance of endothermic peaks which could be assigned to the decomposition of functional groups of the CNT chain and breaking of the ZnO-CNT bonds. XRD characterization demonstrated the existence of ZnO nanocrystallites with size around 60 nm. The best ZnO:CNT composition was further selected for preliminary investigations of the potential of these nanocomposite powders to be processed as pastes for extrusion-based 3D printing.

Silver-Doped Cadmium Selenide/Graphene Oxide-Filled Cellulose Acetate Nanocomposites for Photocatalytic Degradation of Malachite Green toward Wastewater Treatment

Silver-doped cadmium selenide/graphene oxide (GO) (Ag-CdSe/GO) nanocomposites have been synthesized, loaded in cellulose acetate (CA) to form Ag-CdSe/GO@CA heterostructure nanofibers, and characterized in terms of structural, morphological, photocatalytic properties, among others. The photocatalytic degradation of malachite green (MG) was estimated using cadmium selenide-filled CA (CdSe@CA), silver-doped cadmium selenide-filled CA (Ag-CdSe@CA), cadmium selenide/GO-filled CA (CdSe/GO@CA), and silver-doped cadmium selenide/GO-filled CA (Ag-CdSe/GO@CA) nanocomposite materials. The Ag-CdSe/GO@CA nanocomposites exhibit and retain an enhanced photocatalytic activity for the degradation of MG dye. This amended performance is associated with the multifunctional supporting impacts of GO, Ag, and CA on the composite structure and properties. The superior photocatalytic activity is related to the fact that both Ag and GO can act as electron acceptors that boost the separation efficiency of photogenerated carriers and the loading of the combined nanocomposite (Ag-CdSe@GO) on CA nanofibers, which can augment the adsorption of electrons and holes and facilitate the movement of carriers. The stability of Ag-CdSe/GO@CA nanocomposite photocatalysts demonstrates suitable results even after five recycles. This study establishes an advanced semiconductor-based hybrid nanocomposite material for efficient photocatalytic degradation of organic dyes.

Novel AgI/BiSbO4 heterojunction for efficient photocatalytic degradation of organic pollutants under visible light: Interfacial electron transfer pathway, DFT calculation and degradation mechanism study

Herein, we constructed a novel AgI/BiSbO₄ heterojunction via a hydrothermal-precipitation method. The heterojunction structure boosts the generation of hydroxyl and superoxide radicals for efficient degradation of organic pollutants. The photocatalytic activities of the optimal sample for ARG and TC degradation are 10 and 1.6 times higher than those of bare AgI, respectively. Characterizations and theoretical calculations together confirm a strong interfacial charge transfer exists between the interlayer in AgI and BiSbO₄ by the formation of Ag‒O bond, making O atoms obtain rich free electrons from Ag atoms of AgI, thus forming an ultrahigh electron transfer tunnel, and ultimately accelerating the separation of photoinduced electrons. More interestingly, low amounts of Ag⁰ NPs formed during the photocatalytic process, enhancing the visible light absorption because of its SPR (surface plasmon resonance) effect and further promoting the separation of photoinduced carriers. Furthermore, photocatalytic degradation pathways were proposed in detail by analyzing intermediates and a reasonable photocatalytic mechanism was unearthed. This work extends the development of AgI-based heterojunction photocatalysts.

Synthesis and Characterization of π-SnS Nanoparticles and Corresponding Thin Films

Tin sulfide polymorph (π-SnS) nanoparticles exhibit promising optoelectrical characteristics for photovoltaic and hydrogen production performance, mainly because of the possibility of tuning their properties by adjusting the synthesis conditions. This study demonstrates a chemical approach to synthesize π-SnS nanoparticles and the engineering of their properties by altering the Sn precursor concentration (from 0.04 M to 0.20 M). X-ray diffraction and Raman studies confirmed the presence of pure cubic SnS phase nanoparticles with good crystallinity. SEM images indicated the group of cloudy shaped grains, and XPS results confirmed the presence of Sn and S in the synthesized nanoparticles. Optical studies revealed that the estimated energy bandgap values of the as-synthesized π-SnS nanoparticles varied from 1.52 to 1.68 eV. This work highlights the effects of the Sn precursor concentration on the properties of the π-SnS nanoparticles and describes the bandgap engineering process. Optimized π-SnS nanoparticles were used to deposit nanocrystalline π-SnS thin films using the drop-casting technique, and their physical properties were improved by annealing (300 °C for 2 h).

Synthesis, characterization and heavy metal removal efficiency of nickel ferrite nanoparticles (NFN's)

The heavy metals, such as Cr(VI), Pb(II) and Cd(II), in aqueous solutions are toxic even at trace levels and have caused adverse health impacts on human beings. Hence the removal of these heavy metals from the aqueous environment is important to protect biodiversity, hydrosphere ecosystems, and human beings. In this study, magnetic Nickel-Ferrite Nanoparticles (NFNs) were synthesized by co-precipitation method and characterized using X-Ray Diffraction (XRD), Energy Dispersive Spectroscopy (EDS) and Field Emission Scanning Electronic Microscopy (FE-SEM) techniques in order to confirm the crystalline structure, composition and morphology of the NFN’s, these were then used as adsorbent for the removal of Cr(VI), Pb(II) and Cd(II) from wastewater. The adsorption parameters under study were pH, dose and contact time. The values for optimum removal through batch-adsorption were investigated at different parameters (pH 3–7, dose: 10, 20, 30, 40 and 50 mg and contact time: 30, 60, 90, and 120 min). Removal efficiencies of Cr(VI), Pb(II) and Cd(II) were obtained 89%, 79% and 87% respectively under optimal conditions. It was found that the kinetics followed the pseudo second order model for the removal of heavy metals using Nickel ferrite nanoparticles.

Photocatalytic TiO2-Based Nanostructured Materials for Microbial Inactivation

Pathogenic microorganisms can spread throughout the world population, as the current COVID-19 pandemic has dramatically demonstrated. In this scenario, a protection against pathogens and other microorganisms can come from the use of photoactive materials as antimicrobial agents able to hinder, or at least limit, their spreading by means of photocatalytically assisted processes activated by light—possibly sunlight—promoting the formation of reactive oxygen species (ROS) that can kill microorganisms in different matrices such as water or different surfaces without affecting human health. In this review, we focus the attention on TiO2 nanoparticle-based antimicrobial materials, intending to provide an overview of the most promising synthetic techniques, toward possible large-scale production, critically review the capability of such materials to promote pathogen (i.e., bacteria, virus, and fungi) inactivation, and, finally, take a look at selected technological applications.

New insights for enhancing the performance of constructed wetlands at low temperatures

Constructed wetlands (CWs) have been widely utilized for various types of wastewater treatment due to their merits, including high cost-effectiveness and easy operation. However, a few intrinsic drawbacks have always restricted their application and long-term stability, especially their weak performance at temperatures under 10 °C (low temperatures) due to the deterioration of microbial assimilation and plant uptake processes. The existing modifications to improve CWs performance from the direct optimization of internal components to the indirect adjunction of external resources promoted the wastewater treatment efficiency to a certain degree, but the sustainability and sufficiency of pollutants removal remains a challenge. With the goal of optimizing CW components, the integrity of the CW ecosystem and the removal of emerging pollutants, future directions for research should include radiation plant breeding, improvements to CW ecosystems, and the combination or integration of certain treatment processes with CWs to enhance wastewater treatment effects at low temperatures.