Lignin-Based Composite Materials for Photocatalysis and Photovoltaics

Lignin and Nanolignin: Next-Generation Sustainable Materials for Water Treatment

Water scarcity, contamination, and lack of sanitation are global issues that require innovations in chemistry, engineering, and materials science. To tackle the challenge of providing high-quality drinking water for a growing population, we need to develop high-performance and multifunctional materials to treat water on both small and large scales. As modern society and science prioritize more sustainable engineering practices, water treatment processes will need to use materials produced from sustainable resources via green chemical routes, combining multiple advanced properties such as high surface area and great affinity for contaminants. Lignin, one of the major components of plants and an abundant byproduct of the cellulose and bioethanol industries, offers a cost-effective and scalable platform for developing such materials, with a wide range of physicochemical properties that can be tailored to improve their performance for target water treatment applications. This review aims to bridge the current gap in the literature by exploring the use of lignin, both as solid bulk or solubilized macromolecules and nanolignin as multifunctional (nano)materials for sustainable water treatment processes. We address the application of lignin-based macro-, micro-, and nanostructured materials in adsorption, catalysis, flocculation, membrane filtration processes, and antimicrobial coatings and composites. Throughout the exploration of recent progress and trends in this field, we emphasize the importance of integrating principles of green chemistry and materials sustainability to advance sustainable water treatment technologies.

The stability improvements of dye-sensitized solar cell with natural template for photoanode using lignin extracted from rice husk

In response to escalating global concerns over environmental pollution, the development of green dye-sensitized solar cells (DSSCs) has emerged as a promising technology for solar energy conversion. This study harnesses the potential of rice husk, an abundant agricultural waste in Indonesia, by extracting lignin through a simple recycling method. Lignin acts as a natural, non-toxic dopant and template for TiO₂ composites, enhancing the stability of the photoanode in DSSCs. A TiO₂ photoanode modified with 5 % lignin achieved a power conversion efficiency (PCE) of 4.81 %. After a 90-day stability test, the TiO2/lignin 5 % composite retained 78 % of its initial PCE, significantly outperforming pristine TiO₂ in terms of short-circuit current density (JSC) and open-circuit voltage (VOC). This improved stability is attributed to increased porosity, better lignin dispersion within the TiO₂ matrix, prevention of agglomeration, enhanced surface area for dye adsorption, and reduced electrolyte leakage. Furthermore, lignin's high thermal stability on the TiO₂ surface provides additional protection against dye degradation and electrolyte evaporation during repeated light exposure.

Structure and Properties of Polylactide Composites with TiO2-Lignin Hybrid Fillers

The research presented in this article focuses on the use of inorganic-organic material, based on titanium dioxide and lignin, as a filler for polylactide (PLA) biocomposites. To date, no research has been conducted to understand the impact of hybrid fillers consisting of TiO2 and lignin on the supermolecular structure and crystallization abilities of polylactide. Polymer composites containing 1, 3 or 5 wt.% of hybrid filler or TiO2 were assessed in terms of their structure, morphology, and thermal properties. Mechanical properties, including tensile testing, bending, impact strength, and hardness, were discussed. The hybrid filler is characterized by a very good electrokinetic stability at pH greater than 3-4. The addition of all fillers led to a small decrease in the glass transition temperature but, most importantly, the addition of 1% of the hybrid filler to the PLA matrix increased the degree of crystallinity of the material by up to 20%. Microscopic studies revealed differences in the crystallization behavior and nucleation ability of fillers. The use of hybrid filler resulted in higher nucleation density and shorter induction time than in unfilled PLA or PLA with only TiO2. The introduction of small amounts of hybrid filler also affected the mechanical properties of the composites, causing an increase in bending strength and hardness. This information may be useful from a technological process standpoint and may also help to increase the range of applicability of biobased materials.

Challenges associated with cellulose composite material: Facet engineering and prospective

Cellulose is the most abundant polysaccharide on earth. It has a large number of desirable properties. Its low toxicity makes it more useful for a variety of applications. Nowadays, its composites are used in most engineering fields. Composite consists of a polymer matrix and use as a reinforcing material. By reducing the cost of traditional fibers, it has an increasing demand for environment-friendly purposes. The use of these types of composites is inherent in moisture absorption with hindered natural fibers. This determines the reduction of polymer composite material. By appropriate chemical surface treatment of cellulose composite materials, the effect could be diminished. The most modern and advanced techniques and methods for the preparation of cellulose and polymer composites are discussed here. Cellulosic composites show a reinforcing effect on the polymer matrix as pointed out by mechanical characterization. Researchers tried their hard work to study different ways of converting various agricultural by-products into useful eco-friendly polymer composites for sustainable production. Cellulose plays building blocks, that are critical for polymer products and their engineering applications. The most common method used to prepare composites is in-situ polymerization. This help to increase the yields of cellulosic composites with a significant enhancement in thermal stability and mechanical properties. Recently, cellulose composites used as enhancing the incorporation of inorganic materials in multi-functional properties. Furthermore, we have summarized in this review the potential applications of cellulose composites in different fields like packaging, aerogels, hydrogels, and fibers.

Application of Plasticizer Glycerol in Lignosulfonate-Filled Rubber Compounds Based on SBR and NBR

The work deals with the application of biopolymer fillers in rubber formulations. Calcium lignosulfonate was incorporated into styrene-butadiene rubber and acrylonitrile-butadiene rubber in a constant amount of 30 phr. Glycerol in a concentration scale ranging from 5 to 20 phr was used as a plasticizer for rubber formulations. For the cross-linking of the compounds, a sulfur-based curing system was used. The study was focused on the investigation of glycerol in the curing process; the viscosity of rubber compounds; and the cross-link density, morphology, physical-mechanical, and dynamic mechanical properties of vulcanizates. The study revealed that the application of glycerol as a plasticizer resulted in a reduction in the rubber compounds' viscosity and contributed to the better dispersion and distribution of the filler within the rubber matrices. The mutual adhesion and compatibility between the filler and the rubber matrices were improved, which resulted in the significant enhancement of tensile characteristics. The main output of the work is the knowledge that the improvement of the physical-mechanical properties of biopolymer-filled vulcanizates can be easily obtained via the simple addition of a very cheap and environmentally friendly plasticizer into rubber compounds during their processing without additional treatments or procedures. The enhancement of the physical-mechanical properties of rubber compounds filled with biopolymers might contribute to the broadening of their potential applications. Moreover, the price of the final rubber articles could be reduced, and more pronounced ecological aspects could also be emphasized.

Design of biomass-based composite photocatalysts for wastewater treatment: a review over the past decade and future prospects

This investigation applied a systematic review approach on publications covering primary data during 2012-2022 with a focus on photocatalytic degradation of pollutants in aqueous solution by composite materials synthesized with biomass and, at least, TiO₂ and/or ZnO semiconductors to form biomass-based composite photocatalysts (BCPs). After applying a set of eligibility criteria, 107 studies including 832 observations/entries were analyzed. The average removal efficiency and degradation kinetic rate reported for all model pollutants and BCPs were 77.5 ± 21.5% and 0.064 ± 0.174 min^-1, respectively. Principal component analysis (PCA) was applied to analyze BCPs synthesis methods, experimental conditions, and BCPs' characteristics correlated with the removal efficiency and photodegradation kinetics. The relevance of adsorption processes on the pollutants' removal efficiency was highlighted by PCA applied to all categories of pollutants (PCA_pol). The PCA applied to textile dyes (PCA_dyes) and pharmaceutical compounds (PCA_pharma) also indicate the influence of variables related to the composite synthesis (i.e., thermal treatment and time spent on BCPs synthesis) and photocatalytic experimental parameters (catalyst concentration, pollutant concentration, and irradiation time) on the degradation kinetic accomplished by BCPs. Furthermore, the multivariate analysis (PCA_pol) revealed that the specific surface area and the narrow band gap are key characteristics for BCPs to serve as a competitive photocatalyst. The effect of scavengers on pollutants' degradation and the recyclability of BCPs are also discussed, as necessary aspects for scalability trends. Further investigations are recommended to compare the performance of BCPs and commercial catalysts, as well as to assess the costs to treat real wastewater.

Calcium-Lignosulfonate-Filled Rubber Compounds Based on NBR with Enhanced Physical-Mechanical Characteristics

Calcium lignosulfonate in the amount 30 phr was incorporated into rubber compounds based on pure NBR and an NBR carbon black batch, in which the content of carbon black was 25 phr. Glycerine, as a cheap and environmentally friendly plasticizer, was applied into both types of rubber formulations in a concentration scale ranging from 5 to 20 phr. For the cross-linking of rubber compounds, a sulfur-based curing system was used. The work was aimed at the investigation of glycerine content on the curing process and rheological properties of rubber compounds, cross-link density, morphology and physical-mechanical properties of vulcanizates. The results show that glycerine influences the shapes of curing isotherms and results in a significant decrease between the maximum and minimum torque. This points to the strong plasticizing effect of glycerine on rubber compounds, which was also confirmed from rheological measurements. The application of glycerine resulted in better homogeneity of the rubber compounds and in the better dispersion and distribution of lignosulfonate within the rubber matrix, which was subsequently reflected in the significant improvement of tensile characteristics of vulcanizates. A higher cross-link density as well as better physical-mechanical properties were exhibited by the vulcanizates based on the carbon black batch due to the presence of a reinforcing filler.

Recovery of Lignins with Potent Antioxidant Properties from Shells of Edible Nuts by a Green Ball Milling/Deep Eutectic Solvent (DES)-Based Protocol

Lignins are phenolic polymers endowed with potent antioxidant properties that are finding increasing applications in a variety of fields. Consequently, there is a growing need for easily available and sustainable sources, as well as for green extraction methodologies of these compounds. Herein, a ball milling/deep eutectic solvent (DES)-based treatment is reported as an efficient strategy for the recovery of antioxidant lignins from the shells of edible nuts, namely chestnuts, hazelnuts, peanuts, pecan nuts, and pistachios. In particular, preliminarily ball-milled shells were treated with 1:2 mol/mol choline chloride:lactic acid at 120 °C for 24 h, and the extracted material was recovered in 19–27% w/w yields after precipitation by the addition of 0.01 M HCl. Extensive spectroscopic and chromatographic analysis allowed for confirmation that the main phenolic constituents present in the shell extracts were lignins, accompanied by small amounts (0.9% w/w) of ellagic acid, in the case of chestnut shells. The recovered samples exhibited very promising antioxidant properties, particularly in the 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay (EC₅₀ values ranging from 0.03 to 0.19 mg/mL). These results open new perspectives for the valorization of nut shells as green sources of lignins for applications as antioxidants, e.g., in the biomedical, food, and/or cosmetic sector.

New Insights into Green Protocols for Oxidative Depolymerization of Lignin and Lignin Model Compounds

Oxidative depolymerization of lignin is a hot topic in the field of biomass valorization. The most recent and green procedures have been herein detailed. Photochemical and electrochemical approaches are reviewed highlighting the pros and cons of each method. Mechanochemistry activated strategies are able to combine oxidation and depolymerization in the deconstruction of lignin. Homogenous and heterogeneous catalytic systems are exemplified stressing the green aspects associated with both the procedures. Solvent-free approaches as well as those carried out in alternative media are listed. Finally, the few examples of selenium catalyzed lignin valorization reported so far are cited.

Lignin-Supported Heterogeneous Photocatalyst for the Direct Generation of H2O2 from Seawater

The development of smart and sustainable photocatalysts is in high priority for the synthesis of H₂O₂ because the global demand for H₂O₂ is sharply rising. Currently, the global market share for H₂O₂ is around 4 billion US$ and is expected to grow by about 5.2 billion US$ by 2026. Traditional synthesis of H₂O₂ via the anthraquinone method is associated with the generation of substantial chemical waste as well as the requirement of a high energy input. In this respect, the oxidative transformation of pure water is a sustainable solution to meet the global demand. In fact, several photocatalysts have been developed to achieve this chemistry. However, 97% of the water on our planet is seawater, and it contains 3.0-5.0% of salts. The presence of salts in water deactivates the existing photocatalysts, and therefore, the existing photocatalysts have rarely shown reactivity toward seawater. Considering this, a sustainable heterogeneous photocatalyst, derived from hydrolysis lignin, has been developed, showing an excellent reactivity toward generating H₂O₂ directly from seawater under air. In fact, in the presence of this catalyst, we have been able to achieve 4085 μM of H₂O₂. Expediently, the catalyst has shown longer durability and can be recycled more than five times to generate H₂O₂ from seawater. Finally, full characterizations of this smart photocatalyst and a detailed mechanism have been proposed on the basis of the experimental evidence and multiscale/level calculations.

Recent Advances in Synthesis and Degradation of Lignin and Lignin Nanoparticles and Their Emerging Applications in Nanotechnology

Lignin is an important commercially produced polymeric material. It is used extensively in both industrial and agricultural activities. Recently, it has drawn much attention from the scientific community. It is abundantly present in nature and has significant application in the production of biodegradable materials. Its wide usage includes drug delivery, polymers and several forms of emerging lignin nanoparticles. The synthesis of lignin nanoparticles is carried out in a controlled manner. The traditional manufacturing techniques are costly and often toxic and hazardous to the environment. This review article highlights simple, safe, climate-friendly and ecological approaches to the synthesis of lignin nanoparticles. The changeable, complex structure and recalcitrant nature of lignin makes it challenging to degrade. Researchers have discovered a small number of microorganisms that have developed enzymatic and non-enzymatic metabolic pathways to use lignin as a carbon source. These microbes show promising potential for the biodegradation of lignin. The degradation pathways of these microbes are also described, which makes the study of biological synthesis much easier. However, surface modification of lignin nanoparticles is something that is yet to be explored. This review elucidates the recent advances in the biodegradation of lignin in the ecological system. It includes the current approaches, methods for modification, new applications and research for the synthesis of lignin and lignin nanoparticles. Additionally, the intricacy of lignin’s structure, along with its chemical nature, is well-described. This article will help increase the understanding of the utilization of lignin as an economical and alternative-resource material. It will also aid in the minimization of solid waste arising from lignin.

Cleavage of Organosolv Lignin to Phenols Using Nitrogen Monoxide and Hydrazine

From the variety of methods known for the depolymerization of organosolv lignin, a broad range of diversely substituted aromatic compounds are available today. In the present work, a novel two-step reaction sequence is reported, which is focused on the formation of phenols. While the first step of the depolymerization strategy comprises the 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ)-catalyzed oxidation of organosolv lignin with nitrogen monoxide so that two waste materials are combined, cleavage to the phenolic target compounds is achieved in the second step employing hydrazine and potassium hydroxide under Wolff-Kishner-type conditions. Besides the fact that the novel strategy proceeds via an untypical form of oxidized organosolv lignin, the two-step sequence is further able to provide phenols as cleavage products, which bear no substituent at the 4-position.

A Superficial Intramolecular Alignment of Carbon Nitride through Conjugated Monomer for Optimized Photocatalytic CO2 Reduction

One of the most frequent ways to widen the adsorption range of carbon nitride (CN) is to add a well-known photosensitizer into its basic structure. So far, such attachments have been accomplished by using weak van der Waals forces. However, using strong covalent bonding to attach such photosensitizer with CN is yet to be determined. Here, for the first time, we covalently bonded porphyrin (5,10,15,20-tetrakis(4-(2,4-diamino-1,3,5-triazinyl) phenyl)-Porphyrin (TDP)), a renowned photosensitizer, effectively with CN by thermally balanced molecular strategy. A photoreaction system was set up for the deoxygenated conversion of CO2 to CO under visible light, where cobalt acted as a redox controller to speed up the charge transportation, while CN-TDP worked as a CO2 activating photocatalyst. The subsequent photocatalyst has a broader absorbance range, a greater specific surface area, and intramolecular organic connections that help to decrease the electron-hole pairs’ recombination rate. Furthermore, the average weight ratio between urea and TDP was well-tuned, resulting in a fantastic CO2 photoconversion for CN-TDP7.0 compared to the blank sample. This substantial increase in photocatalytic activity predicts a significant shift in CN’s specific surface area, band gap, chemical composition, and structure, as well as the efficient separation of photogenerated charge carriers from the ground state (HOMO) to the excited state (LUMO), making it a top candidate for CO2 photoreduction. At the same time, this approach paves the path for the bottom-up fabrication of carbon nitride nanosheets.

Lignin-Based Polymer Electrolyte Membranes for Sustainable Aqueous Dye-Sensitized Solar Cells

In the quest for sustainable materials for quasi-solid-state (QS) electrolytes in aqueous dye-sensitized solar cells (DSSCs), novel bioderived polymeric membranes were prepared in this work by reaction of preoxidized kraft lignin with poly(ethylene glycol)diglycidylether (PEGDGE). The effect of the PEGDGE/lignin relative proportions on the characteristics of the obtained membranes was thoroughly investigated, and clear structure-property correlations were highlighted. In particular, the glass transition temperature of the materials was found to decrease by increasing the amount of PEGDGE in the formulation, indicating that polyethylene glycol chains act as flexible segments that increase the molecular mobility of the three-dimensional polymeric network. Concurrently, their swelling ability in liquid electrolyte was found to increase with the concentration of PEGDGE, which was also shown to influence the ionic transport efficiency within the membrane. The incorporation of these lignin-based cross-linked systems as QS electrolyte frameworks in aqueous DSSCs allowed the preparation of devices with excellent long-term stability under UV-vis light, which were found to be superior to benchmark QS-DSSCs incorporating state-of-the-art carboxymethylcellulose membranes. This study provides the first demonstration of lignin-based QS electrolytes for stable aqueous DSSCs, establishing a straightforward strategy to exploit the potential of lignin as a functional polymer precursor for the field of sustainable photovoltaic devices.

Titania/chitosan–lignin nanocomposite as an efficient photocatalyst for the selective oxidation of benzyl alcohol under UV and visible light

Developing functional materials from biomass is a significant research subject due to its unique structure, abundant availability, biodegradability and low cost. A series of chitosan–lignin (CL) composites were prepared through a hydrothermal method by varying the weight ratio of chitosan and lignin. Subsequently, these CL composites were combined with titania (T) to form a nanocomposite (T/CL) using sol–gel and hydrothermal based methods. T/CL nanocomposites exhibited improved photocatalytic performance in comparison with sol–gel and hydrothermally prepared pristine titania (SGH-TiO₂), towards the selective oxidation of benzyl alcohol (BnOH) to benzaldehyde (Bnald) under UV (375 nm) and visible light (515 nm). More specifically, the 75T/CL(25 : 75) nanocomposite (a representative photocatalyst from the 75T/CL nanocomposite series) showed very high selectivity (94%) towards Bnald at 55% BnOH conversion under UV light. Whereas, SGH-TiO₂ titania exhibited much lower (68%) selectivity for Bnald at similar BnOH conversion. Moreover, the 75T/CL(25 : 75) nanocomposite also showed excellent Bnald selectivity (100%) at moderate BnOH conversion (19%) under visible light. Whereas, SGH-TiO₂ did not show any activity for BnOH oxidation under visible light. XPS studies suggest that the visible light activity of the 75T/CL(25 : 75) nanocomposite is possibly related to the doping of nitrogen into titania from chitosan. However, according to UV-visible-DRS results, no direct evidence pertaining to the decrease in band-gap energy of titania was found upon coupling with the CL composite and the visible light activity was attributed to N-doping of titania. Overall, it was found that T/CL nanocomposites enhanced the photocatalytic performance of titania via improved light harvesting and higher selectivity through mediation of active radical species.

Combining titania with chitosan–lignin composites results in an active and selective photocatalyst for the oxidation of benzyl alcohol to benzaldehyde under green light (515 nm).

Recent advances in bioelectronics chemistry

Research in bioelectronics is highly interdisciplinary, with many new developments being based on techniques from across the physical and life sciences. Advances in our understanding of the fundamental chemistry underlying the materials used in bioelectronic applications have been a crucial component of many recent discoveries. In this review, we highlight ways in which a chemistry-oriented perspective may facilitate novel and deep insights into both the fundamental scientific understanding and the design of materials, which can in turn tune the functionality and biocompatibility of bioelectronic devices. We provide an in-depth examination of several developments in the field, organized by the chemical properties of the materials. We conclude by surveying how some of the latest major topics of chemical research may be further integrated with bioelectronics.

Recent advances in bioelectronics chemistry

Research in bioelectronics is highly interdisciplinary, with many new developments being based on techniques from across the physical and life sciences. Advances in our understanding of the fundamental chemistry underlying the materials used in bioelectronic applications have been a crucial component of many recent discoveries. In this review, we highlight ways in which a chemistry-oriented perspective may facilitate novel and deep insights into both the fundamental scientific understanding and the design of materials, which can in turn tune the functionality and biocompatibility of bioelectronic devices. We provide an in-depth examination of several developments in the field, organized by the chemical properties of the materials. We conclude by surveying how some of the latest major topics of chemical research may be further integrated with bioelectronics.

A novel way for high value-added application of lignosulfonate: Producing lignosulfonate nanosheets/graphene ultrathin film electrodes for electrochemical capacitors

In this paper, a novel way for high value-added application of lignosulfonate is presented. In this study, we use lignosulfonate nanosheets to fabricate a free-standing, binder-free, ultrathin and light-weight conductive film electrode via vacuum filtration method. The results show that LS is a promising candidate material for the preparation of electrochemical capacitor film electrode. It is worth mentioning that we use non-toxic, pollution-free aqueous solution (water) over organic solvents as the dispersion during the reductive graphene oxide (RGO) preparation process. The electrochemical measurements exhibit that the resistivity of lignosulfonate nanosheets/RGO (LNRGO) film electrode is 0.66 × 10^-3 kΩ cm^-1. The specific capacitance of the LNRGO film electrode is calculated to be 120 mF cm^-2 at the current density of 0.2 mA cm^-2, which is approximately 6.67 times larger than that of RGO-water film electrode.

Lignin-Inorganic Interfaces: Chemistry and Applications from Adsorbents to Catalysts and Energy Storage Materials

Lignin is one the most fascinating natural polymers due to its complex aromatic-aliphatic structure. Phenolic hydroxyl and carboxyl groups along with other functional groups provide technical lignins with reactivity and amphiphilic character. Many different lignins have been used as functional agents to facilitate the synthesis and stabilization of inorganic materials. Herein, the use of lignin in the synthesis and chemistry of inorganic materials in selected applications with relevance to sustainable energy and environmental fields is reviewed. In essence, the combination of lignin and inorganic materials creates an interface between soft and hard materials. In many cases it is either this interface or the external lignin surface that provides functionality to the hybrid and composite materials. This Minireview closes with an overview on future directions for this research field that bridges inorganic and lignin materials for a more sustainable future.

"Waste to Wealth": Lignin as a Renewable Building Block for Energy Harvesting/Storage and Environmental Remediation

Lignin is the second most earth-abundant biopolymer having aromatic unit structures, but it has received less attention than other natural biomaterials. Recent advances in the development of lignin-based materials, such as mesoporous carbon, flexible thin films, and fiber matrix, have found their way into applications to photovoltaic devices, energy-storage systems, mechanical energy harvesters, and catalytic components. In this Review, we summarize and suggest another dimension of lignin valorization as a building block for the synthesis of functional materials in the fields of energy and environmental applications. We cover lignin-based materials in the photovoltaic and artificial photosynthesis for solar energy conversion applications. The most recent technological evolution in lignin-based triboelectric nanogenerators is summarized from its fundamental properties to practical implementations. Lignin-derived catalysts for solar-to-heat conversion and oxygen reduction are discussed. For energy-storage applications, we describe the utilization of lignin-based materials in lithium-ion rechargeable batteries and supercapacitors (e.g., electrodes, binders, and separators). We also summarize the use of lignin-based materials as heavy-metal adsorbents for environmental remediation. This Review paves the way to future potentials and opportunities of lignin as a renewable material for energy and environmental applications.

Laser-assisted preparation of Pd nanoparticles on carbon cloth for the degradation of environmental pollutants in aqueous medium

Laser ablation in liquid (LAL), one of the attractive methods for fabrication of nanoparticles, was used for the modification of carbon cloth (CC) by deposition of palladium nanoparticles (Pd NPs); a simple stirring method was deployed to deposit Pd NPs on the CC surface. Characterization techniques viz X-ray diffraction (XRD), Fourier transform infrared (FT-IR), scanning electron microscope (SEM), energy-dispersive X-ray spectrometry (EDS) and inductively coupled plasma atomic emission spectroscopy (ICP-AES) were applied to study the surface of the ensuing samples which confirmed that LAL technique managed to fabricate and deposit the Pd NPs on the surface of CC. In addition, the catalytic prowess of the carbon cloth-Pd NPs (CC/Pd NPs) was investigated in the NaBH₄- or HCOOH-assisted reduction of assorted environmental pollutants in aqueous medium namely hexavalent chromium [Cr(VI)], 4-nitrophenol (4-NP), congo red (CR) and methylene blue (MB). The CC/Pd NPs system has advantages such as high stability/sustainability, high catalytic performance and easy reusability.

Electrically-Conductive Sub-Micron Carbon Particles from Lignin: Elucidation of Nanostructure and Use as Filler in Cellulose Nanopapers

Carbon particles were produced from kraft lignin through carbonization of perfectly spherical, sub-micron beads obtained by aerosol flow. The structure of the resulting carbon particles was elucidated and compared to that derived from commercially available technical lignin powder, which is undefined in geometry. In addition to the smaller diameters of the lignin beads (<1 µm) compared to those of the lignin powder (100 µm), the former displayed a slightly higher structural order as revealed by X-ray diffraction and Raman spectroscopy. With regard to potential application in composite structures, the sub-micron carbon beads were clearly advantageous as a filler of cellulose nanopapers, which displayed better mechanical performance but with limited electrical conductivity. Compression sensing was achieved for this nanocomposite system.