Lysozyme in human body fluids

Development of a Composite Hydrogel Containing Statistically Optimized PDGF-Loaded Polymeric Nanospheres for Skin Regeneration: In Vitro Evaluation and Stem Cell Differentiation Studies

Platelet-derived growth factor-BB (PDGF-BB) is a polypeptide growth factor generated by platelet granules faced to cytokines. It plays a role in forming and remodeling various tissue types, including epithelial tissue, through interaction with cell-surface receptors on most mesenchymal origin cells. However, it breaks down quickly in biological fluids, emphasizing the importance of preserving them from biodegradation. To address this challenge, we formulated and evaluated PDGF-encapsulated nanospheres (PD@PCEC) using polycaprolactone-polyethylene glycol-polycaprolactone. PD@PCECs were fabricated through the triple emulsion methodology and optimized by using the Box-Behnken design. The encapsulation efficiency (EE) of nanoencapsulated PDGF-BB was investigated concerning four variables: stirring rate (X1), stirring duration (X2), poly(vinyl alcohol) concentration (X3), and PDGF-BB concentration (X4). The selected optimized nanospheres were integrated into a gelatin-collagen scaffold (PD@PCEC@GC) and assessed for morphology, biocompatibility, in vitro release, and differentiation-inducing activity in human adipose-derived stem cells (hADSCs). The optimized PD@PCEC nanospheres exhibited a particle size of 177.9 ± 91 nm, a zeta potential of 5.2 mV, and an EE of 87.7 ± 0.44%. The release profile demonstrated approximately 85% of loaded PDGF-BB released during the first 360 h, with a sustained release over the entire 504 h period, maintaining bioactivity of 87.3%. The study also included an evaluation of the physicochemical properties of the scaffolds and an assessment of hADSC adhesion to the scaffold's surface. Additionally, hADSCs cultivated within the scaffold effectively differentiated into keratinocyte-like cells (KLCs) over 21 days, evidenced by morphological changes and upregulation of keratinocyte-specific genes, including cytokeratin 18, cytokeratin 19, and involucrin, at both transcriptional and protein levels.

Snail Mucus-Enhanced Adhesion of Human Chondrocytes on 3D Porous Agarose Scaffolds

This study reports the preparation of a novel porous 3D scaffold from agarose-snail mucus (AGSMu) for cartilage tissue repair applications. AG is reported for its unique thermal and mechanical properties, biocompatibility, and biodegradability, making it suitable for biomedical applications. Still, it lacks the cell adhesion properties required for tissue engineering applications. SMu is a complex substance identified to contain glycosaminoglycans (GAGs) and other bioactive molecules that promote wound healing and reduce cartilage deterioration and inflammation. Hence, porous 3D blend scaffolds containing AG and SMu were prepared by the freeze-drying method, characterized, and investigated for bioactive effects on human chondrocyte (C28/I2) cells. The scaffolds had a microporous structure with an average pore size of 245 μm. FTIR spectroscopy showed that SMu was successfully incorporated into the scaffolds. The SMu increased the mechanical strength of the composite scaffolds by more than 80% compared to the pristine AG scaffold. The scaffolds were found to be biocompatible with tunable degradation. The human chondrocyte cells attached and proliferated well on the 3D scaffolds in a few days, demonstrating a marked improvement in adhesion due to the presence of SMu. Enhanced cell adhesion and mechanical properties of 3D porous AG scaffolds could make them suitable for articular cartilage repair and regeneration.

Impact of Protein Corona Formation on the Thermoresponsive Behavior of Acrylamide-Based Nanogels

The ability to fine-tune the volume phase transition temperature (VPTT) of thermoresponsive nanoparticles is essential to their successful application in drug delivery. The rational design of these materials is limited by our understanding of the impact that nanoparticle-protein interactions have on their thermoresponsive behavior. In this work, we demonstrate how the formation of protein corona impacts the transition temperature values of acrylamide-based nanogels and their reversibility characteristics, in the presence of lysozyme, given its relevance for the ocular and intranasal administration route. Nanogels were synthesized with N-isopropylacrylamide or N-n-propylacrylamide as backbone monomers, methylenebis(acrylamide) (2.5-20 molar %) as a cross-linker, and functionalized with negatively charged monomers 2-acrylamido-2-methylpropanesulfonic acid, N-acryloyl-l-proline, or acrylic acid; characterization showed comparable particle diameter (c.a.10 nm), but formulation-dependent thermoresponsive properties, in the range 28-54 °C. Lysozyme was shown to form a complex with the negatively charged nanogels, lowering their VPTT values; the hydrophilic nature of the charged comonomer controlled the drop in VPTT upon complex formation, while matrix rigidity only had a small, yet significant effect. The cross-linker content was found to play a major role in determining the reversibility of the temperature-dependent transition of the complexes, with only 20 molar % cross-linked-nanogels displaying a fully reversible transition. These results demonstrate the importance of evaluating protein corona formation in the development of drug delivery systems based on thermoresponsive nanoparticles.

Chitosan-based oral hydrogel formulations of β-galactosidase to improve enzyme supplementation therapy for lactose intolerance

β-Galactosidase supplementation plays an important role in the life of people with lactose intolerance. However, these formulations are rendered ineffective by the low pH and pepsin in the stomach and pancreatic proteases in the intestine. Therefore, it is necessary to develop oral transport systems for carrying this enzyme in the active form up to the intestine, where the lactose digestion occurs. In this research, a new hydrogel was developed that could potentially be used for enzyme supplement therapy. In this regard, the chitosan-based β-Gal formulations described in the manuscript are an alternative long-acting preparation to the so far available preparations that allow for enzyme protection and mucosal targeting. These hydrogels were prepared from chitosan and polyethylene glycol and contained a covalently immobilized β-galactosidase from Aspergillus oryzae. The β-galactosidase in the hydrogel was protected from degradation in a gastric medium at a pH of 2.5 and retained 75 % of its original activity under subsequent intestinal conditions. In the case of a simulated gastric fluid with a pH of 1.5, a copolymer containing methacrylic acid functional groups was sufficient to protect the hybrid hydrogel from the extremely acidic pH. In addition, the surface of the hydrogel was chemically modified with thiol and amidine groups, which increased the binding to intestinal mucin by 20 % compared with the unmodified hydrogel. These results represent a promising approach for oral transport as a reservoir for β-galactosidase in the small intestine to reduce the symptoms of hypolactasia.

Probing the interaction of lysozyme with cardiac glycoside digitoxin: experimental and in silico analyses

Digitoxin is a cardiac glycoside used to treat heart failure and heart arrhythmia. However, its therapeutic concentration range is very narrow. High doses of digitoxin are associated with severe side effects; therefore, it is necessary to develop the delivery system which can control the plasma levels of it. In this context, the binding of lysozyme, an important protein having many applications, with digitoxin has been studied to see the ability of the former as a carrier. The studies were carried out using both experimental and computational methods. The intrinsic fluorescence of lysozyme increased on the addition of digitoxin. Fluorescence results suggested that there was a strong interaction between lysozyme and digitoxin which was favored, mainly, by hydrophobic forces. Further, digitoxin affected the secondary structure of lysozyme slightly by causing the partial unfolding of lysozyme. The preferred binding site of digitoxin within lysozyme was the large cavity of the protein. Molecular docking studies also established the principal role of hydrophobic forces in the binding with a significant support of hydrogen bonding. Frontier molecular orbitals of free digitoxin and in complexation with lysozyme were also computed and discussed. The findings from molecular dynamics simulation studies elucidate that, when contrasted with the first and third conformations of the digitoxin-bound lysozyme complex, the second conformation promotes structural stability, reduces flexibility, and enhances the compactness and folding properties of lysozyme. The overall study shows that lysozyme could act as a potential carrier for digitoxin in pharmaceutical formulations.

Rapid Synthesis of Robust Antibacterial and Biodegradable Hydrogels via Frontal Polymerization

Chitosan (CS) is widely used in biomedical hydrogels due to their similarity to extracellular matrix. However, the preparation method of CS-based hydrogel suffers the drawbacks of tedious operation, time-consuming and energy consumption. Thus, there is an urgent need to develop a rapid synthesis pathway towards hydrogels. In this work, we used a modified CS as a cross-linking agent and acrylic acid (AA) as monomer to prepare a hydrogel through frontal polymerization (FP), which facilitates a facile and rapid method achieved in several minutes. The occurrence of pure FP was confirmed via the frontal velocity and temperature profile measurement. In addition, the as-prepared hydrogel shows excellent mechanical strength up to 1.76 MPa, and the Young's modulus (ranging from 0.16 to 0.56 MPa) is comparable to human skin. The degradation mechanism is revealed by the micro-IR images through the distribution of the functional groups, which is attributed to the breakage of the ether bond. Moreover, the hydrogel exhibits excellent degradability, biocompatibility and antibacterial properties, offering great potentials in tissue engineering. We believe this work not only offers a facile and rapid FP method to fabricate a robust degradable hydrogel, but also provides an effective pathway for the investigation of the degradation mechanism at the chemical bond analysis level.

Fabrication of Chitosan/PEGDA Bionanocomposites for Enhanced Drug Encapsulation and Release Efficiency

Drug delivery systems (DDS) have evolved in the last decades with the development of hydrogels and particles. However, challenges such as high systemic uptake, side effects, low bioavailability, and encapsulation efficiency continue to be significant hurdles faced by such DDSs. Particles and hydrogels can be specifically designed for targeted DDSs to mitigate some of these problems. This study developed chitosan (Cs) particles (Ps) and composite films using poly(ethylene glycol) diacrylate (PEGDA) as a copolymer to encapsulate gentamicin (GtS) for drug delivery. We demonstrated that lysozyme degrades the chitosan β-1,4 glycosidic bonds to release GtS. PEGDA increased drug encapsulation efficiency by shielding the repelling forces of like charges between Cs and GtS. The data show that PEGDA does not hinder enzymatic degradation while increasing drug encapsulation efficiency and producing more homogeneous particles. Additionally, we utilized Michael's reaction to cross-link Cs, CsPs, and PEGDA to produce a film designed for drug delivery. The film is an anchor for CsPs to prevent premature drug release. The cross-linking of Cs and PEGDA does not affect lysozyme activity, and CsPs could successfully release GtS without affecting GtS activity.

Drug delivery based on a supramolecular chemistry approach by using chitosan hydrogels

Microbial infections are a serious healthcare related problem, causing several complications and even death. That is why, the development of new drug delivery systems with prolonged effect represents an interesting research topic. This study presents the synthesis and characterization of new hydrogels based on chitosan and three halogenated monoaldehydes. Further, the hydrogels were used as excipients for the development of drug delivery systems (DDS) by the incorporation of fluconazole, an antifungal drug. The systems were structurally characterized by Fourier Transformed Infrared Spectroscopy and Nuclear Magnetic Resonance, both methods revealing the formation of the imine linkages between chitosan and the aldehydes. The samples presented a high degree of ordering at supramolecular level, as demonstrated by WXRD and POM and a good water-uptake, reaching a maximum of 1.6 g/g. The obtained systems were biodegradable, loosing between 38 and 49 % from their initial mass in the presence of lysozyme in 21 days. The ability to release the antifungal drug in a sustained manner for seven days, along with the high values of the inhibition zone diameter, reaching a maximum of 64 mm against Candida parapsilosis for the chlorine containing sample, recommend these systems as promising materials for bioapplications.

Mechanical Characterization of 3D-Printed Patterned Membranes for Cardiac Tissue Engineering: An Experimental and Numerical Study

A myocardial infarction can cause irreversible damage to the heart muscle. A promising approach for the treatment of myocardial infarction and prevention of severe complications is the application of cardiac patches or epicardial restraint devices. The challenge for the fabrication of cardiac patches is the replication of the fibrillar structure of the myocardium, in particular its anisotropy and local elasticity. In this study, we developed a chitosan-gelatin-guar gum-based biomaterial ink that was fabricated using 3D printing to create patterned anisotropic membranes. The experimental results were then used to develop a numerical model able to predict the elastic properties of additional geometries with tunable elasticity that could easily match the mechanical properties of the heart tissue (particularly the myocardium).

Regulation of Lysozyme Activity by Human Hormones

Background

Lysozyme is a part of human and animal noncellular immunity. The regulation of its activity by hormones is poorly studied. The aim of this study was to test the in vitro activity of lysozyme in the presence of catecholamines, natriuretic hormones, and estradiol (E2).

Methods

Hormones were incubated with lysozyme, and the activity of lysozome was further determined using a test culture of Micrococcus luteus in the early exponential growth stage. The activity of lysozyme was assessed based on the rate of change in the OD of the test culture. Molecular docking was performed using SwissDock server http://www.swissdock.ch/docking), and molecular structures were further analyzed and visualized in the UCSF Chimera 1.15rc software.

Results

According to the results, epinephrine and norepinephrine increased lysozyme activity up to 180% compared to the hormone-free enzyme. Changing the pH of the medium from 6.3 to 5.5, increased the lysozyme activity in the presence of E2 up to 150-200 %. The results also showed that exposure to hormones could modify lysozyme ctivity, and this effect depends on the temperature and pH value. The molecular docking revealed a decrease in the activation energy of the active site of enzyme during the interaction of catecholamines with the amino acid residues, asp52 and glu35 of the active site.

Conclusion

Our findings demonstrate an additional mechanism for the involvement of lysozyme in humoral regulation of nonspecific immunity with respect to human pathogenic microflora and bacterial skin commensals by direct modulation of its activity using human hormones.

Bacterial killing activity and lysozymes: A stable defence mechanism in stallion seminal plasma?

During insemination, bacterial contamination of the ejaculate can lead to reduced sperm quality and transmission of pathogens to the female, thus should be avoided. The semen of a variety of animal taxa possess antimicrobial properties against a wide range of bacterial species through antimicrobial molecules, such as lysozyme, but their variance and the factors influencing it are unknown for most species. In this study, the antibacterial defence (bacterial killing activity (BKA) against Escherichia (E.) coli and Staphylococcus (S.) aureus as well as lysozyme concentration) was studied in seminal fluid from two consecutive ejaculates of 18 stallions. All ejaculates showed BKA against the tested bacteria, which correlated between the two consecutive ejaculates (r_S  = 0.526, p = .025 for E. coli and r_S  = 0.656, p = .003 for S. aureus) and appeared to be stable over the tested period. The lysozyme concentration (LC) showed no significant correlation between the consecutive ejaculates (r_S  = 0.161, p = .681). However, LC had a positive correlation to the ratio of apoptotic spermatozoa within the ejaculates (r_S  = 0.426, p = .019). In contrast to other livestock (e.g., boar, bull), the BKA in stallion semen did not correlate significantly with the age of the animal nor sperm quality characteristics.

Complexation between porcine gastric mucin (PGM) and lysozyme: Influence of heat treatment of lysozyme on the tribological properties

The influence of complexation between porcine gastric mucin (PGM) and lysozyme (LYZ) solutions (pH⁓7.0) on their lubricating properties was studied at a hydrophobic self-mated polydimethylsiloxane (PDMS) tribopair. To this end, LYZ solutions with varying heating time, namely 1^hr, 3^hr-, and 6^hr at 90 °C, as well as unheated LYZ solution, were prepared. The lubricating capability of PGM and LYZ solutions and also their mixtures was characterized using pin-on-disk tribometry. In parallel, to precisely investigate the interaction between PGM and LYZ solutions, an array of the well-known experiments including electrophoretic-dynamic light scattering, circular dichroism spectroscopy and optical waveguide light-mode spectroscopy were employed. These experiments were utilized to elucidate the key features e.g. zeta potential, hydrodynamic diameter, conformational structure and mass adsorption. The tribometry results indicated that both PGM and unheated LYZ solutions had poor lubricating properties in the boundary lubrication regime (sliding speed lower than 10 mm/s). Mixing PGM with unheated LYZ led to a slight decrease in the friction coefficient, but no desirable lubricity was observed. An optimum slippery characteristic was achieved by incorporating 1^hr heated LYZ solution into PGM one. Excellent lubricity of PGM/1^hr heated LYZ may stem from surface charge compensation, tenaciously compact aggregation, unique conformational structure and considerable mass adsorption onto PDMS. This finding revealed that a strong interaction between PGM and LYZ molecules and as a result, the promising lubricating capability of PGM/LYZ mixtures, can be administered by varying heat-treatment duration of LYZ proteins.

Temperature-Responsive Magnetic Nanoparticles for Bioanalysis of Lysozyme in Urine Samples

Highly selective multifunctional magnetic nanoparticles containing a thermoresponsive polymer shell were developed and used in the sample pretreatment of urine for the assessment of lysozymuria in leukemia patients. Crosslinked poly(N-isopropylacrylamide-co-acrylic acid-co-N-tert-butylacrylamide) was grown onto silica-coated magnetic nanoparticles by reversible addition fragmentation chain transfer (RAFT) polymerization. The lysozyme binding property of the nanoparticles was investigated as a function of time, protein concentration, pH, ionic strength and temperature and their selectivity was assessed against other proteins. High-abundant proteins, like human serum albumin and γ-globulins did not interfere with the binding of lysozyme even at elevated concentrations characteristic of proteinuria. A sample cleanup procedure for urine samples has been developed utilizing the thermocontrollable protein binding ability of the nanoparticles. Method validation was carried out according to current bioanalytical method validation guidelines. The method was highly selective, and the calibration was linear in the 25 to 1000 µg/mL concentration range, relevant in the diagnosis of monocytic and myelomonocytic leukemia. Intra- and inter-day precision values ranged from 2.24 to 8.20% and 1.08 to 5.04%, respectively. Intra-day accuracies were between 89.9 and 117.6%, while inter-day accuracies were in the 88.8 to 111.0% range. The average recovery was 94.1 ± 8.1%. Analysis of unknown urine samples in comparison with a well-established reference method revealed very good correlation between the results, indicating that the new nanoparticle-based method has high potential in the diagnosis of lysozymuria.

Highly Segregated Biocomposite Membrane as a Functionally Graded Template for Periodontal Tissue Regeneration

Guided tissue regeneration (GTR) membranes are used for treating chronic periodontal lesions with the aim of regenerating lost periodontal attachment. Spatially designed functionally graded bioactive membranes with surface core layers have been proposed as the next generation of GTR membranes. Composite formulations of biopolymer and bioceramic have the potential to meet these criteria. Chitosan has emerged as a well-known biopolymer for use in tissue engineering applications due to its properties of degradation, cytotoxicity and antimicrobial nature. Hydroxyapatite is an essential component of the mineral phase of bone. This study developed a GTR membrane with an ideal chitosan to hydroxyapatite ratio with adequate molecular weight. Membranes were fabricated using solvent casting with low and medium molecular weights of chitosan. They were rigorously characterised with scanning electron microscopy, Fourier transform infrared spectroscopy in conjunction with photoacoustic sampling accessory (FTIR-PAS), swelling ratio, degradation profile, mechanical tensile testing and cytotoxicity using human osteosarcoma and mesenchymal progenitor cells. Scanning electron microscopy showed two different features with 70% HA at the bottom surface packed tightly together, with high distinction of CH from HA. FTIR showed distinct chitosan dominance on top and hydroxyapatite on the bottom surface. Membranes with medium molecular weight showed higher swelling and longer degradation profile as compared to low molecular weight. Cytotoxicity results indicated that the low molecular weight membrane with 30% chitosan and 70% hydroxyapatite showed higher viability with time. Results suggest that this highly segregated bilayer membrane shows promising potential to be adapted as a surface layer whilst constructing a functionally graded GTR membrane on its own and for other biomedical applications.

Recent applications of quantum dots in optical and electrochemical aptasensing detection of Lysozyme

Lysozyme (Lyz) is a naturally occurring enzyme that operates against Gram-positive bacteria and leads to cell death. This antimicrobial enzyme forms the part of the innate defense system of nearly all animals and exists in their somatic discharges such as milk, tears, saliva and urine. Increased Lyz level in serum is an important indication of several severe diseases and so, precise diagnosis of Lyz is an urgent need in biosensing assays. Up to know, various traditional and modern techniques have been introduced for Lyz determination. Although the traditional methods suffer from some significant limitations such as time-consuming, arduous, biochemical screening, bacterial colony isolation, selective enrichment and requiring sophisticated instrumentation or isotope labeling, some new modern approaches like aptamer-based biosensors (aptasensors) and quantum dot (QD) nanomaterials are the main goal in Lyz detection. Electrochemical and optical sensors have been highlighted because of their adaptability and capability to decrease the drawbacks of common methods. Using an aptamer-based biosensor, sensor selectivity is enhanced due to the specific recognition of the analyte. Thereby, in this review article, the recent advances and achievements in electrochemical and optical aptasensing detection of Lyz based on different QD nanomaterials and detection methods have been discussed in detail.

Enzymatic Degradation of Glycosaminoglycans and Proteoglycan-Mimetic Materials in Solution and on Polyelectrolyte Multilayer Surfaces

Proteoglycans (PGs) play many important roles in biology, contributing to the mechanical properties of tissues, helping to organize extracellular matrix components, and participating in signaling mechanisms related to mechanotransduction, cell differentiation, immune responses, and wound healing. Our lab has designed two different types of PG mimics: polyelectrolyte complex nanoparticles (PCNs) and PG-mimetic graft copolymers (GCs), both of which are prepared using naturally occurring glycosaminoglycans. This work evaluates the enzymatic stability of these PG mimics using hyaluronidases (I-S, IV-S, and II), chondroitinase ABC, and lysozyme, for PG mimics suspended in solution and adsorbed onto surfaces. Hyaluronan (HA)- and chondroitin sulfate (CS)-containing PG mimics are degraded by the hyaluronidases. PCNs prepared with CS and GCs prepared with heparin are the only CS- and HA-containing PG mimics protected from chondroitinase ABC. None of the materials are measurably degraded by lysozyme. Adsorption to polyelectrolyte multilayer surfaces protects PG mimics from degradation, compared to when PG mimics are combined with enzymes in solution; all surfaces are still intact after 21 days of enzyme exposure. This work reveals how the stability of PG mimics is controlled by both the composition and macromolecular assembly of the PG mimic and also by the size and specificity of the enzyme. Understanding and tuning these degradation susceptibilities are essential for advancing their applications in cardiovascular materials, orthopedic materials, and growth factor delivery applications.

Biocompatible silver nanoparticles: An investigation into their protein binding efficacies, anti-bacterial effects and cell cytotoxicity studies

Green synthesis of silver nanoparticles (AgNPs) has garnered tremendous interest as conventional methods include the use and production of toxic chemicals, products, by-products and reagents. In this regard, the synthesis of AgNPs using green tea (GT) extract and two of its components, (-)-epigallocatechin gallate (EGCG) and (+)-catechin (Ct) as capping/stabilizing agents, is reported. The synthesized AgNPs showed antibacterial activity against the bacterial strains Staphylococcus aureus and Escherichia coli, along with anticancer activity against HeLa cells. After administering nanoparticles to the body, they come in contact with proteins and results in the formation of a protein corona; hence we studied the interactions of these biocompatible AgNPs with hen egg white lysozyme (HEWL) as a carrier protein. Static quenching mechanism was accountable for the quenching of HEWL fluorescence by the AgNPs. The binding constant (K b) was found to be higher for EGCG-AgNPs ((2.309 ± 0.018) × 104 M-1) than for GT-AgNPs and Ct-AgNPs towards HEWL. EGCG-AgNPs increased the polarity near the binding site while Ct-AgNPs caused the opposite effect, but GT-AgNPs had no such observable effects. Circular dichroism studies indicated that the AgNPs had no such appreciable impact on the secondary structure of HEWL. The key findings of this research included the synthesis of AgNPs using GT extract and its constituent polyphenols, and showed significant antibacterial, anticancer and protein-binding properties. The -OH groups of the polyphenols drive the in situ capping/stabilization of the AgNPs during synthesis, which might offer new opportunities having implications for nanomedicine and nanodiagnostics.

Structure and Function of the Autolysin SagA in the Type IV Secretion System of Brucella abortus

A recent genetic study with Brucella abortus revealed the secretion activator gene A (SagA) as an autolysin component creating pores in the peptidoglycan (PGN) layer for the type IV secretion system (T4SS) and peptidoglycan hydrolase inhibitor A (PhiA) as an inhibitor of SagA. In this study, we determined the crystal structures of both SagA and PhiA. Notably, the SagA structure contained a PGN fragment in a space between the N- and C-terminal domains, showing the substrate-dependent hinge motion of the domains. The purified SagA fully hydrolyzed the meso-diaminopimelic acid (DAP)-type PGN, showing a higher activity than hen egg-white lysozyme. The PhiA protein exhibiting tetrameric assembly failed to inhibit SagA activity in our experiments. Our findings provide implications for the molecular basis of the SagA-PhiA system of B. abortus. The development of inhibitors of SagA would further contribute to controlling brucellosis by attenuating the function of T4SS, the major virulence factor of Brucella.

Oxidation of lysozyme induced by peroxyl radicals involves amino acid modifications, loss of activity, and formation of specific crosslinks

The present work examined the oxidation and crosslinking of the anti-bacterial enzyme lysozyme (Lyso), which is present in multiple biological fluids, and released from the cytoplasmic granules of macrophages and neutrophils at sites of infection and inflammation. It is therefore widely exposed to oxidants including peroxyl radicals (ROO•). We hypothesized that exposure to ROO• would generate specific modifications and inter- and intra-protein crosslinks via radical-radical reactions. Lyso was incubated with AAPH (2,2'-azobis(2-methylpropionamidine) dihydrochloride) as a ROO• source. Enzymatic activity was assessed, while oxidative modifications were detected and quantified using electrophoresis and liquid chromatography (UPLC) with fluorescence or mass detection (MS). Computational models of AAPH-Lyso interactions were developed. Exposure of Lyso to AAPH (10 and 100 mM for 3 h, and 20 mM for 1 h), at 37 °C, decreased enzymatic activity. 20 mM AAPH showed the highest efficiency of Lyso inactivation (1.78 mol of Lyso inactivated per ROO•). Conversion of Met to its sulfoxide, and to a lesser extent, Tyr oxidation to 3,4-dihydroxyphenylalanine and diTyr, were detected by UPLC-MS. Extensive transformation of Trp, involving short chain reactions, to kynurenine, oxindole, hydroxytryptophan, hydroperoxides or di-alcohols, and N-formyl-kynurenine was detected, with Trp62, Trp63 and Trp108 the most affected residues. Interactions of AAPH inside the negatively-charged catalytic pocket of Lyso, with Trp108, Asp52, and Glu35, suggest that Trp108 oxidation mediates, at least partly, Lyso inactivation. Crosslinks between Tyr20-Tyr23 (intra-molecular), and Trp62-Tyr23 (inter-molecular), were detected with both proximity (Tyr20-Tyr23), and chain flexibility (Trp62) appearing to favor the formation of covalent crosslinks.

Bacterial Peptidoglycan Fragments Differentially Regulate Innate Immune Signaling

The human innate immune system responds to both pathogen and commensal bacteria at the molecular level using bacterial peptidoglycan (PG) recognition elements. Traditionally, synthetic and commercially accessible PG monosaccharide units known as muramyl dipeptide (MDP) and N-glycolyl MDP (ng-MDP) have been used to probe the mechanism of innate immune activation of pattern recognition receptors, such as NOD-like receptors. However, bacterial PG is a dynamic and complex structure, with various chemical modifications and trimming mechanisms that result in the production of disaccharide-containing elements. These molecules pose as attractive targets for immunostimulatory screening; however, studies are limited because of their synthetic accessibility. Inspired by disaccharide-containing compounds produced from the gut microbe Lactobacillus acidophilus, a robust and scalable chemical synthesis of PG-based disaccharide ligands was implemented. Together with a monosaccharide PG library, compounds were screened for their ability to stimulate proinflammatory genes in bone-marrow-derived macrophages. The data reveal distinct gene induction patterns for monosaccharide and disaccharide PG units, suggesting that PG innate immune signaling is more complex than a one activator-one pathway program, as biologically relevant fragments induce transcriptional programs to different degrees. These disaccharide molecules will serve as critical immunostimulatory tools to more precisely define specialized innate immune regulatory mechanisms that distinguish between commensal and pathogenic bacteria residing in the microbiome.

Chitosan and Hydroxyapatite Based Biomaterials to Circumvent Periprosthetic Joint Infections

Every year, worldwide, millions of people suffering from joint pain undergo joint replacement. For most patients, joint arthroplasty reduces pain and improve function, though a small fraction will experience implant failure. One of the main reasons includes prosthetic joint infection (PJI), involving the prosthesis and adjacent tissues. Few microorganisms (MO) are required to inoculate the implant, resulting in the formation of a biofilm on its surface. Standard treatment includes not only removal of the infected prosthesis but also the elimination of necrotic bone fragments, local and/or systemic administration of antibiotics, and revision arthroplasty with a new prosthesis, immediately after the infection is cleared. Therefore, an alternative to the conventional therapeutics would be the incorporation of natural antimicrobial compounds into the prosthesis. Chitosan (Ch) is a potential valuable biomaterial presenting properties such as biocompatibility, biodegradability, low immunogenicity, wound healing ability, antimicrobial activity, and anti-inflammatory potential. Regarding its antimicrobial activity, Gram-negative and Gram-positive bacteria, as well as fungi are highly susceptible to chitosan. Calcium phosphate (CaP)-based materials are commonly utilized in orthopedic and dentistry for their excellent biocompatibility and bioactivity, particularly in the establishment of cohesive bone bonding that yields effective and rapid osteointegration. At present, the majority of CaP-based materials are synthetic, which conducts to the depletion of the natural resources of phosphorous in the future due to the extensive use of phosphate. CaP in the form of hydroxyapatite (HAp) may be extracted from natural sources as fish bones or scales, which are by-products of the fish food industry. Thus, this review aims to enlighten the fundamental characteristics of Ch and HAp biomaterials which makes them attractive to PJI prevention and bone regeneration, summarizing relevant studies with these biomaterials to the field.

Aptasensors for lysozyme detection: Recent advances

Lysozyme is an enzyme existing in multiple organisms where it plays various vital roles. The most important role is its antibacterial activity in the human body; in fact, it is also called "the body's own antibiotic". Despite its proven utility, lysozyme can potentially trigger allergic reactions in sensitive individuals, even in trace amounts. Therefore, lysozyme determination in foods is becoming of paramount importance. Traditional detection methods are expensive, time-consuming and they cannot be applied for fast in-situ quantification. Electrochemical and optical sensors have attracted an increasing attention due to their versatility and ability to reduce the disadvantages of traditional methods. Using an aptamer as the bioreceptor, the sensor selectivity is amplified due to the specific recognition of the analyte. This review is presenting the progresses made in lysozyme determination by means of electrochemical and optical aptasensors in the last five years. A critical overview on the methodologies employed for aptamer immobilization and on the strategies for signal amplification of the assays will be described. Different optical and electrochemical aptasensors will be discussed and compared in terms of analytical performances, versatility and real samples applications.

Multifunctional Biodegradable Microrobot with Programmable Morphology for Biomedical Applications

We described a magnetic chitosan microscaffold tailored for applications requiring high biocompatibility, biodegradability, and monitoring by real-time imaging. Such magnetic microscaffolds exhibit adjustable pores and sizes depending on the target application and provide various functions such as magnetic actuation and enhanced cell adhesion using biomaterial-based magnetic particles. Subsequently, we fabricated the magnetic chitosan microscaffolds with optimized shape and pore properties to specific target diseases. As a versatile tool, the capability of the developed microscaffold was demonstrated through in vitro laboratory tasks and in vivo therapeutic applications for liver cancer therapy and knee cartilage regeneration. We anticipate that the optimal design and fabrication of the presented microscaffold will advance the technology of biopolymer-based microscaffolds and micro/nanorobots.

Molecularly Imprinted Polyscopoletin for the Electrochemical Detection of the Chronic Disease Marker Lysozyme

Herein we report the electropolymerization of a scopoletin based molecularly imprinted polymer (MIP) for the detection of lysozyme (Lyz), an enzymatic marker of several diseases in mammalian species. Two different approaches have been used for the imprinting of lysozyme based, respectively, on the use of a monomer-template mixture and on the covalent immobilization of the enzyme prior to polymer synthesis. In the latter case, a multi-step protocol has been exploited with preliminary functionalization of gold electrode with amino groups, via 4-aminothiophenol, followed by reaction with glutaraldehyde, to provide a suitable linker for lysozyme. Each step of surface electrode modification has been followed by cyclic voltammetry and electrochemical impedance spectroscopy, which has been also employed to test the electrochemical responses of the developed MIP. The sensors show good selectivity to Lyz and detect the enzyme at concentrations up to 292 mg/L (20 μM), but with different performances, depending on the used imprinting approach. An imprinting factor equal to 7.1 and 2.5 and a limit of detection of 0.9 mg/L (62 nM) and 2.1 mg/L (141 nM) have been estimated for MIPs prepared with and without enzyme immobilization, respectively. Competitive rebinding experiment results show that this sensing material is selective for Lyz determination. Tests were performed using synthetic saliva to evaluate the potential application of the sensors in real matrices for clinical purposes.

Temperature dependent aggregation mechanism and pathway of lysozyme: By all atom and coarse grained molecular dynamics simulation

Aggregation of protein causes various diseases including Alzheimer's disease, Parkinson's disease, and type II diabetes. It was found that aggregation of protein depends on many factors like temperature, pH, salt type, salt concentration, ionic strength, protein concentration, co solutes. Here we have tried to capture the aggregation mechanism and pathway of hen egg white lysozyme using molecular dynamics simulations at two different temperatures; 300 K and 340 K. Along with the all atom simulations to get the atomistic details of aggregation mechanism, we have used coarse grained simulation with MARTINI force field to monitor the aggregation for longer duration. Our results suggest that due to the aggregation, changes in the conformation of lysozyme are more at 340 K than at 300 K. The change in the conformation of the lysozyme at 300 K is mainly due to aggregation where at 340 K change in conformation of lysozyme is due to both aggregation and temperature. Also, a more compact aggregated system is formed at 340 K.

3-D macro/microporous-nanofibrous bacterial cellulose scaffolds seeded with BMP-2 preconditioned mesenchymal stem cells exhibit remarkable potential for bone tissue engineering

Bone repair using BMP-2 is a promising therapeutic approach in clinical practices, however, high dosages required to be effective pose issues of cost and safety. The present study explores the potential of low dose BMP-2 treatment via tissue engineering approach, which amalgamates 3-D macro/microporous-nanofibrous bacterial cellulose (mNBC) scaffolds and low dose BMP-2 primed murine mesenchymal stem cells (C3H10T1/2 cells). Initial studies on cell-scaffold interaction using unprimed C3H10T1/2 cells confirmed that scaffolds provided a propitious environment for cell adhesion, growth, and infiltration, owing to its ECM-mimicking nano-micro-macro architecture. Osteogenic studies were conducted by preconditioning the cells with 50 ng/mL BMP-2 for 15 min, followed by culturing on mNBC scaffolds for up to three weeks. The results showed an early onset and significantly enhanced bone matrix secretion and maturation in the scaffolds seeded with BMP-2 primed cells compared to the unprimed ones. Moreover, mNBC scaffolds alone were able to facilitate the mineralization of cells to some extent. These findings suggest that, with the aid of 'osteoinduction' from low dose BMP-2 priming of stem cells and 'osteoconduction' from nano-macro/micro topography of mNBC scaffolds, a cost-effective bone tissue engineering strategy can be designed for quick and excellent in vivo osseointegration.

The potential of lactoferrin, ovotransferrin and lysozyme as antiviral and immune-modulating agents in COVID-19

Coronavirus disease 2019 (COVID-19), caused by SARS coronavirus 2 (SARS-CoV-2), is spreading rapidly with no established effective treatments. While most cases are mild, others experience uncontrolled inflammatory responses with oxidative stress, dysregulation of iron and coagulation as features. Lactoferrin, ovotransferrin and lysozyme are abundant, safe antimicrobials that have wide antiviral as well as immunomodulatory properties. In particular, lactoferrin restores iron homeostasis and inhibits replication of SARS-CoV, which is closely related to SARS-CoV-2. Ovotransferrin has antiviral peptides and activities that are shared with lactoferrin. Both lactoferrin and lysozyme are ‘immune sensing’ as they may stimulate immune responses or resolve inflammation. Mechanisms by which these antimicrobials may treat or prevent COVID-19, as well as sources and forms of these, are reviewed.

The 3D-Printed Bilayer's Bioactive-Biomaterials Scaffold for Full-Thickness Articular Cartilage Defects Treatment

The full-thickness articular cartilage defect (FTAC) is an abnormally severe grade of articular cartilage (AC) injury. An osteochondral autograft transfer (OAT) is the recommended treatment, but the increasing morbidity rate from osteochondral plug harvesting is a limitation. Thus, the 3D-printed bilayer’s bioactive-biomaterials scaffold is of major interest. Polylactic acid (PLA) and polycaprolactone (PCL) were blended with hydroxyapatite (HA) for the 3D-printed bone layer of the bilayer’s bioactive-biomaterials scaffold (B-BBBS). Meanwhile, the blended PLA/PCL filament was 3D printed and combined with a chitosan (CS)/silk firoin (SF) using a lyophilization technique to fabricate the AC layer of the bilayer’s bioactive-biomaterials scaffold (AC-BBBS). Material characterization and mechanical and biological tests were performed. The fabrication process consists of combining the 3D-printed structure (AC-BBBS and B-BBBS) and a lyophilized porous AC-BBBS. The morphology and printing abilities were investigated, and biological tests were performed. Finite element analysis (FEA) was performed to predict the maximum load that the bilayer’s bioactive-biomaterials scaffold (BBBS) could carry. The presence of HA and CS/SF in the PLA/PCL structure increased cell proliferation. The FEA predicted the load carrying capacity to be up to 663.2 N. All tests indicated that it is possible for BBBS to be used in tissue engineering for AC and bone regeneration in FTAC treatment.

Proteome analysis of male accessory gland secretions in Leucinodes orbonalis Guenee (Lepidoptera: Crambidae), a Solanum melongena L. pest

Male accessory gland (MAG) proteins are transferred along with the sperm to females at the time of mating and have diverse effects on female reproductive physiology in a wide range of insects. In this study, we sought to identify the MAG proteins in Leucinodes orbonalis Guenee, a Solanum melongena L. pest, by analyzing the MAG proteins of virgin and mated male moths by nano-LC-ESI-MS/MS techniques. A total of 142 and 131 proteins in virgin and mated males were identified, respectively, among which 17 (12.0%) and 10 (7.6%) proteins were found to show secretory signals in virgin and mated males, respectively. These secretory proteins were shown to be involved in several biological processes in insects, including egg development, sperm-related functions/capacitation, defense, metabolism, and protein chaperoning. To the best of our knowledge, this is the first study to perform a proteome analysis of the MAG proteins of L. orbonalis, and offers an opportunity for further investigation of the functions of these proteins. In insects, certain MAG proteins are known to inhibit mating whereas others accelerate egg-laying. Therefore, the identification of these proteins in L. orbonalis may be useful for pest control.

Exonuclease I-Assisted General Strategy to Convert Aptamer-Based Electrochemical Biosensors from "Signal-Off" to "Signal-On"

In terms of how the signal varies in response to increased concentration of an analyte, sensors can be classified as either "signal-on" or "signal-off" format. While both types hold potentials to be sensitive, selective, and reusable, in many situations "signal-on" sensors are preferred for their low background signal and better selectivity. In this study, with the detection of lysozyme using its DNA aptamer as a trial system, for the first time we demonstrated that such an aptamer-based electrochemical biosensor can be converted from intrinsically "signal-off" to "signal-on" with the aid of a DNA exonuclease. The fact that the stepwise cleavage of antilysozyme aptamer catalyzed by Exonuclease I (Exo I) is entirely inhibited upon binding lysozyme leads to the selective removal of unbound DNA probes (thiolate anti-lysozyme DNA aptamer strands immobilized on gold electrode) upon the introduction of Exo I to the sensor. With the aid of electrostatically bound redox cations ([Ru(NH₃)₆]³⁺), we were able to quantitate the number of aptamer strands that are bound with lysozymes via conventional cyclic voltammetry (CV) measurements. We demonstrated that Exo I-assisted signal-on conversion protocol not only improves the sensing performance (10 times better limit of detection) but also promises a versatile strategy for DNA-based biosensor design, i.e., it can be readily adapted to other aptamer-protein binding systems (thrombin, as another example).

Shell disorder analysis predicts greater resilience of the SARS-CoV-2 (COVID-19) outside the body and in body fluids

The coronavirus (CoV) family consists of viruses that infects a variety of animals including humans with various levels of respiratory and fecal-oral transmission levels depending on the behavior of the viruses' natural hosts and optimal viral fitness. A model to classify and predict the levels of respective respiratory and fecal-oral transmission potentials of the various viruses was built before the outbreak of MERS-CoV using AI and empirically-based molecular tools to predict the disorder level of proteins. Using the percentages of intrinsic disorder (PID) of the nucleocapsid (N) and membrane (M) proteins of CoV, the model easily clustered the viruses into three groups with the SARS-CoV (M PID = 8%, N PID = 50%) falling into Category B, in which viruses have intermediate levels of both respiratory and fecal-oral transmission potentials. Later, MERS-CoV (M PID = 9%, N PID = 44%) was found to be in Category C, which consists of viruses with lower respiratory transmission potential but with higher fecal-oral transmission capabilities. Based on the peculiarities of disorder distribution, the SARS-CoV-2 (M PID = 6%, N PID = 48%) has to be placed in Category B. Our data show however, that the SARS-CoV-2 is very strange with one of the hardest protective outer shell, (M PID = 6%) among coronaviruses. This means that it might be expected to be highly resilient in saliva or other body fluids and outside the body. An infected body is likelier to shed greater numbers of viral particles since the latter is more resistant to antimicrobial enzymes in body fluids. These particles are also likelier to remain active longer. These factors could account for the greater contagiousness of the SARS-CoV-2 and have implications for efforts to prevent its spread.

Pires R, Botelho G, Reis RL, Alves NM. Spin-Coated Polysaccharide-Based Multilayered Freestanding Films with Adhesive and Bioactive Moieties

Freestanding films based on catechol functionalized chitosan (CHI), hyaluronic acid (HA), and bioglass nanoparticles (BGNPs) were developed by spin-coating layer-by-layer assembly (SA-LbL). The catechol groups of 3,4-dihydroxy-l-phenylalanine (DOPA) present in the marine mussels adhesive proteins (MAPs) are the main factors responsible for their characteristic strong wet adhesion. Then, the produced films were cross-linked with genipin to improve their stability in wet state. Overall, the incorporation of BGNPs resulted in thicker and bioactive films, hydrophilic and rougher surfaces, reduced swelling, higher weight loss, and lower stiffness. The incorporation of catechol groups onto the films showed a significant increase in the films' adhesion and stiffness, lower swelling, and weight loss. Interestingly, a synergetic effect on the stiffness increase was observed upon the combined incorporation of BGNPs with catechol-modified polymers, given that such films were the stiffest. Regarding the biological assays, the films exhibited no negative effects on cellular viability, adhesion, and proliferation, and the BGNPs seemed to promote higher cellular metabolic activity. These bioactive LbL freestanding films combine enhanced adhesion with improved mechanical properties and could find applications in the biomedical field, such as guided hard tissue regeneration membranes.

Dual Crosslinked Collagen/Chitosan Film for Potential Biomedical Applications

The application of polymeric biomaterial scaffolds utilizing crosslinking strategy has become an effective approach in these days. In the present study, the development and characterization of collagen-chitosan hydrogel film has been reported on using dual crosslinking agent's, i.e., tannic acid and genipin simultaneously. Incorporation of genipin imparts a greenish-blue color to the polymeric film. The effect of dual crosslinking and their successful interaction within the matrix was evaluated by infrared analysis spectroscopy. The porosity of the film was examined using scanning electron microscopy (SEM). Results of TGA determine the intermediate thermal degradation. Further, the crosslinking phenomenon has found primary impact on the strength of the films. Enzymatic degradation for the films was performed with lysozyme and lipase. The cell adhesion and proliferation was also accomplished using mouse embryonic cell lines wherein the cells cultured on the dual crosslinked film. The thriving utilization of such dual crosslinked polymeric film finds their applications in ophthalmology especially as an implant for temporary injured cornea and skin tissue regeneration.

Cellular chaining influences biofilm formation and structure in group A Streptococcus

Group A Streptococcal (GAS) biofilm formation is an important pathological feature contributing to the antibiotic tolerance and progression of various GAS infections. Although a number of bacterial factors have been described to promote in vitro GAS biofilm formation, the relevance of in vitro biofilms to host-associated biofilms requires further understanding. In this study, we demonstrate how constituents of the host environment, such as lysozyme and NaCl, can modulate GAS bacterial chain length and, in turn, shape GAS biofilm morphology and structure. Disruption of GAS chains with lysozyme results in biofilms that are more stable. Based on confocal microscopy, we attribute the increase in biofilm stability to a dense and compact three-dimensional structure produced by de-chained cells. To show that changes in biofilm stability and structure are due to the shortening of bacterial chains and not specific to the activity of lysozyme, we demonstrate that augmented chaining induced by NaCl or deletion of the autolysin gene mur1.2 produced defects in biofilm formation characterized by a loose biofilm architecture. We conclude that GAS biofilm formation can be directly influenced by host and environmental factors through the modulation of bacterial chain length, potentially contributing to persistence and colonization within the host. Further studies of in vitro biofilm models incorporating physiological constituents such as lysozyme may uncover new insights into the physiology of in vivo GAS biofilms.

Decoration of the enterococcal polysaccharide antigen EPA is essential for virulence, cell surface charge and interaction with effectors of the innate immune system

Enterococcus faecalis is an opportunistic pathogen with an intrinsically high resistance to lysozyme, a key effector of the innate immune system. This high level of resistance requires a complex network of transcriptional regulators and several genes (oatA, pgdA, dltA and sigV) acting synergistically to inhibit both the enzymatic and cationic antimicrobial peptide activities of lysozyme. We sought to identify novel genes modulating E. faecalis resistance to lysozyme. Random transposon mutagenesis carried out in the quadruple oatA/pgdA/dltA/sigV mutant led to the identification of several independent insertions clustered on the chromosome. These mutations were located in a locus referred to as the enterococcal polysaccharide antigen (EPA) variable region located downstream of the highly conserved epaA-epaR genes proposed to encode a core synthetic machinery. The epa variable region was previously proposed to be responsible for EPA decorations, but the role of this locus remains largely unknown. Here, we show that EPA decoration contributes to resistance towards charged antimicrobials and underpins virulence in the zebrafish model of infection by conferring resistance to phagocytosis. Collectively, our results indicate that the production of the EPA rhamnopolysaccharide backbone is not sufficient to promote E. faecalis infections and reveal an essential role of the modification of this surface polymer for enterococcal pathogenesis.

Enterococcus faecalis is a commensal bacterium colonizing the gastro-intestinal tract of humans. This organism can cause life-threatening opportunistic infections and represents a reservoir for the transmission of antibiotic resistance genes such as resistance to vancomycin. E. faecalis strains responsible for nosocomial infections are also found in healthy individuals and the virulence factors identified so far are not strictly associated with clinical isolates. The molecular basis underpinning E. faecalis infections therefore remains unclear. In this work, we identify several mutations clustered on the chromosome, which play a role in the resistance of E. faecalis to effectors of the innate immune system such as lysozyme and bile salts. We show that the corresponding genes contribute to the decoration of a conserved polysaccharide called the enterococcal polysaccharide antigen and that this decoration is essential for E. faecalis virulence. This mechanism critical for pathogenesis represents an attractive therapeutic target to control enterococcal infections.

Synthesis and fabrication of novel quinone-based chromenopyrazole antioxidant-laden silk fibroin nanofibers scaffold for tissue engineering applications

Oxidative stress is critically attributed for impeding tissue repair and regeneration process. Elimination of over-accumulated, deleterious reactive oxygen species (ROS) could be elicited to accelerate healing in tissue engineering applications. Antioxidant biomolecules play a pivotal role in attenuating oxidative stress by neutralizing the free radical effects. Herein, we describe the synthesis and fabrication of novel quinone-based chromenopyrazole (QCP) antioxidant-laden silk fibroin (SF) electrospun nanofiber scaffold (QCP-SF) for tissue engineering applications. The spectral characterization of the synthesized compounds (6a-6h) were analysed by using NMR, FTIR and mass spectra and cell viability study of all the synthesized compounds were evaluated by MTT assay in primary rat bone marrow stem cells (rBMSCs). Among the prepared molecules, compound 6h showed an excellent cell viability, and antioxidant efficacy of compound 6h (QCP) was investigated through 1,1‑diphenyl‑2‑picrylhydiazyl (DPPH) scavenging assay. QCP expressed high antioxidant activity with IC50% of DPPH scavenging was observed about 5.506 ± 0.2786 μg. Novel QCP laden SF fiber scaffolds (QCP-SF) were characterized and incorporation of QCP did not affect the nanofiber architecture of QCP-SF scaffold. QCP-SF scaffold exhibited an enhanced thermal and mechanical stability when compared to native SF fiber mat. In vitro biocompatibility studies were evaluated using NIH 3T3 fibroblasts and rBMSCs. The QCP-SF scaffold displayed an increased cell attachment and proliferation in both cell types. In vitro wound healing study (scratch assay) of QCP-SF scaffold showed an excellent cell migration with NIH 3T3 cells into scratch area and complete cell migration occurred within 24 h. Based on results, we propose that QCP-loaded SF (QCP-SF) nanofibrous scaffolds can serve as a promising potential antioxidant fibrous scaffold for skin tissue engineering applications.

A protein corona study by scattering correlation spectroscopy: a comparative study between spherical and urchin-shaped gold nanoparticles

The study of protein interactions with gold nanoparticles (GNP) is a key step prior to any biomedical application. These interactions depend on many GNP parameters such as size, surface charge, chemistry, and shape. In this work, we propose to use a sensitive technique named scattering correlation spectroscopy or SCS to study protein interactions with GNP. SCS allowed the investigation of the GNP hydrodynamic radius with a very high sensitivity before and after interaction with proteins. No labeling is needed. As a proof-of-concept, two of the most used morphologies of GNP-based nanovectors have been used within this work: spherical-shaped GNP (GNS) and branched-shaped GNP (GNU). The measurement of several parameters such as the number of proteins binding to one GNP, the binding affinity and the cooperativeness of binding for three different plasma proteins on the GNP surface was carried out. While GNS showed an increase in the hydrodynamic radius, indicating that each kind of protein binds on the GNS in a specific orientation, GNU showed different orientations of proteins due to their multi-oriented surfaces (tips) with a higher surface to volume area. Quantitative data based on the Hill model were extracted to obtain the affinity of the proteins to both GNS and GNU surfaces. Data variations can be understood in terms of the electrostatic properties of the proteins, which interact differently with the negatively charged GNP surfaces.

Improved antibacterial performance using hydrogel-immobilized lysozyme as a catalyst in water

Silver nanoparticle-based catalysts are used extensively to kill bacteria in drinking water treatment. However secondary contamination and their high cost require scientists to seek alternatives with non-toxicity, high activity and low cost. In this article, we develop a new hydrogel-immobilized lysozyme (h-lysozyme) that shows excellent antibacterial performance, including high activity duration of up to 55 days, inhibition efficiency as high as 99.4%, good recycling capability of up to 11 cycles, a wide temperature window and extremely low concentration. The immobilized lysozyme displayed greatly improved bacterial inhibition with both Gram-negative E. coli and Gram-positive B. subtilis, which enables broad antibacterial applications in various water systems. In parallel, the non-toxic structure and high stability of the h-lysozyme without additional contamination make it a promising alternative to nanoparticle catalysts fur use in drinking water purification.

Hydrogel-immobilized lysozyme for antibacterial membrane modification.

Effects and formulation of silver nanoscaffolds on cytotoxicity dependent ion release kinetics towards enhanced excision wound healing patterns in Wistar albino rats

Wound tissue regeneration and angiogenesis are dynamic processes that send physiological signals to the body. Thus, designing novel nanoscaffolds by understanding their surface modifications and toxicological response in a biological system with a potent anti-inflammatory response is a viable solution. In this respect, inspired by the surface chemistry, in the present work we focus on the chemical optimization of silver nanoscaffolds using surface cappings in order to understand their kinetic release behaviour in simulated wound fluids (SWF), to analyze their blood compatibility in human lymphocytes and erythrocytes and then embed them in a chitosan-agarose matrix (CAM) as a productive drug delivery system to evaluate in vivo excision wound tissue regeneration efficiency in Wistar rats. In this regard, polyvinyl alcohol capped silver nanocomposites (PVA-AgNPs) exhibit a dominant antibacterial efficacy with the sustained and controlled release of silver ions and percentage cell mortality and percentage hemolysis of only 10% and 16% compared with uncapped-AgNPs or silver bandaids (SBDs). Also, PVA-AgNP impregnated CAM (PVA-CAM) shows positive effects through their anti-inflammatory and angiogenic properties, with a nearly 95% healing effect within 9 days. The complete development of collagen and fibroblast constituents was also monitored in PVA-CAM by hematoxylin & eosin (H & E) and Masson trichrome (MT) staining. These results provide a clear insight into the development of a potent therapeutic formulation using CAM as a scaffold incorporated with surface functionalized PVA-AgNPs as a bioeffective and biocompatible polymer for the fabrication of efficacious silver wound dressing scaffolds in clinical practice.

A sustained and controlled release of silver ions from AgNPs is driven by greater percentage of wound contraction with minimal cytotoxic behavioural rates and effective antibacterial activity.

Light-Triggered Drug Release from 3D-Printed Magnetic Chitosan Microswimmers

Advances in design and fabrication of functional micro/nanomaterials have sparked growing interest in creating new mobile microswimmers for various healthcare applications, including local drug and other cargo ( e. g., gene, stem cell, and imaging agent) delivery. Such microswimmer-based cargo delivery is typically passive by diffusion of the cargo material from the swimmer body; however, controlled active release of the cargo material is essential for on-demand, precise, and effective delivery. Here, we propose a magnetically powered, double-helical microswimmer of 6 μm diameter and 20 μm length that can on-demand actively release a chemotherapeutic drug, doxorubicin, using an external light stimulus. We fabricate the microswimmers by two-photon-based 3D printing of a natural polymer derivative of chitosan in the form of a magnetic polymer nanocomposite. Amino groups presented on the microswimmers are modified with doxorubicin by means of a photocleavable linker. Chitosan imparts the microswimmers with biocompatibility and biodegradability for use in a biological setting. Controlled steerability of the microswimmers is shown under a 10 mT rotating magnetic field. With light induction at 365 nm wavelength and 3.4 × 10^-1 W/cm² intensity, 60% of doxorubicin is released from the microswimmers within 5 min. Drug release is ceased by controlled patterns of light induction, so as to adjust the desired release doses in the temporal domain. Under physiologically relevant conditions, substantial degradation of the microswimmers is shown in 204 h to nontoxic degradation products. This study presents the combination of light-triggered drug delivery with magnetically powered microswimmer mobility. This approach could be extended to similar systems where multiple control schemes are needed for on-demand medical tasks with high precision and efficiency.

Antibacterial activity of male and female sperm-storage organs in ants

Bacteria can damage sperm and thus reduce the reproductive success of both males and females; selection should therefore favour the evolution of antimicrobial protection. Eusocial hymenopterans might be particularly affected by such bacterial infections because of their mating ecology. In both sexes, mating is restricted to a short window early in the adult stage; there are no further chances to mate later in life. Males die shortly after mating, but queens use the acquired sperm to fertilise their eggs for years, sometimes decades. The reproductive success of both sexes is, thus, ultimately sperm-limited, which maintains strong selection for high sperm viability before and after storage. We tested the antibacterial activity of the contents of the male and female sperm-storage organs - the accessory testes and the spermatheca, respectively. As our study species, we used the bacterium Escherichia coli and the garden ant Lasius niger, whose queens can live for several decades. Our results provide the first empirical evidence that male and female sperm-storage organs display different antibacterial activity. While the contents of the accessory testes actually enhanced bacterial growth, the contents of the spermatheca strongly inhibited it. Furthermore, mating appears to activate the general immune system in queens. However, antimicrobial activity in both the spermatheca and the control tissue (head-thorax homogenate) declined rapidly post-mating, consistent with a trade-off between immunity and reproduction. Overall, this study suggests that ejaculates undergo an immune 'flush' at the time of mating, allowing storage of sperm cells free of bacteria.