Recent advances in DNA walker machines and their applications coupled with signal amplification strategies: A critical review

The nucleic acid reactions on the nanomaterials surface for biomedicine

Integrating nucleic acids (NAs) with nanomaterials has substantially advanced biomedical research, enabling critical applications in biosensing, drug delivery, therapeutics, and the synthesis of nanomaterials. At the core of these advances are the reactions of NAs on nanomaterial surfaces, encompassing conjugation (covalent and non-covalent), detachment (physical and chemical), and signal amplification (enzyme-mediated signal amplification, enzyme-free signal amplification, and DNA Walker). Here, we review the fundamental mechanisms and recent progress in nucleic acid reactions on nanomaterial surfaces, discuss emerging applications for diagnostics, nanomedicine, and gene therapy, and explore persistent challenges in the field. We offer a forward-looking perspective on how future developments could better control, optimize, and harness these reactions for transformative advances in nanomedicine and biomedical engineering.

A triple-helix molecular switch-based fluorescent aptasensor using Klenow fragment-assisted target recycling and Ribonuclease H-powered DNA walker cascade amplification for detection of MRSA

MRSA is an antibiotic resistant bacterium that poses a significant threat to the environment and human health due to its bioaccumulation and potential widespread contamination. The prompt and accurate identification of MRSA is essential for enhancing environmental monitoring and clinical management. Here, we develop a triple-helix molecular switch (THMS) fluorescent aptasensor for the determination of MRSA using Klenow fragment (KF)-assisted target recycling and Ribonuclease H (Rnase H)-powered DNA walker cascade amplification. In this method, the target opens the THMS by specifically binding with the aptamer, resulting in the release of target/aptamer complex and DNA walker. KF then initiates the target recycling process via strand-displacement polymerization reaction under the assistance of carboxyfluorescein (FAM)-labeled primer and dNTPs, creating plenty of double-stranded DNA (dsDNA) products. These dsDNA products show low affinity to graphene oxide (GO) and generate strong fluorescence. This fluorescence is considerably significantly amplified in the presence of SYBR Green I (SGI), attributable to the synergistic interaction between dsDNA and SGI. In the interim, Rnase H drives the released DNA walker to automatically walk on the carboxylated graphene oxide surface by cleaving FAM-labeled RNA signal probe (SP), causing the FAMs to dissociate from the carboxylated graphene oxide (CGO). Therefore, fluorescent signal originating from the two reaction pathways can be detected at excitation/emission wavelengths of 480/514 nm. The target measured by this strategy demonstrates a broad linear working range from 102 colony-forming units (CFU)/mL to 107 CFU/mL, with a detection limit (LOD) of 15 CFU/mL. Moreover, this method performs well in milk and pus sample analysis. These results reveal that this aptasensor is highly specific and sensitive for detecting MRSA and is endowed with good potential for food monitoring and clinical diagnosis applications.

An enzyme-free fluorescence biosensor for UO22+ detection using Y-shaped wheel-mediated triple walking as a signal amplifier

Based on a Y-shaped wheel-mediated triple walker, an enzyme-free biosensor was reported for UO22+ detection. Due to the DNAzyme-driven mechanism, our walker was activated and produced a fluorescence signal for UO22+ assay. The sensor demonstrated ultra-sensitivity, good specificity and excellent accuracy, holding great promise for UO22+ sensing in complex water samples.

Efficient SERS Substrate HOF@Au in Conjunction with DNAzyme-Mediated DNA Walker as a Signal Amplifier for the Ultrasensitive Detection of Lomefloxacin

Lomefloxacin (LOM) is an efficacious antibiotic that might lead to liver damage and other adverse reactions if consumed over an extended period. Hence, this study proposed a DNAzyme-mediated DNA walker as a signal amplifier in combination with a substantial quantity of Au nanoparticle (NP)-loaded hydrogen-bonded organic frameworks (HOFs) as a surface-enhanced Raman scattering (SERS) substrate to accomplish the highly sensitive detection of LOM in food. Crucially, due to their high specific surface area and strong adsorption capacity, HOFs act as an ideal substrate for the in situ growth of a large amount of Au NPs, which exhibit a robust and uniform SERS enhancement. Once the target LOM was presented, the DNAzyme was activated to start the DNA walker and produce single DNA in abundance, which further triggered the catalytic hairpin assembly (CHA) cycle. In addition, the multi-interstitial core-shell structure of Au@Ag@4-nitrobenzenethiol (4-NTP)@Au@Hp3 produced more SERS "hot spots" and significantly amplified the local electromagnetic field, with HOF@Au synergistically strengthening the Raman signal of 4-NTP. Using this principle, this sensor achieved the ultrasensitive detection of LOM through the "signal on" strategy, with a detection limit as low as 4.62 × 10-14 mol/L. This strategy explored a meaningful innovative path for the design of a novel SERS biosensor for the sensitive and selective detection of antibiotics in food.

Graphene oxide-based fluorescent biosensors for pathogenic bacteria detection: A review

BACKGROUND

Pathogenic bacteria are widespread in nature and can cause infections and various complications, thereby posing a severe risk to public health. Therefore, simple, rapid, sensitive, and cost-effective methods must be developed to detect pathogenic bacteria. Biosensors are prominent platforms for detecting pathogenic bacteria owing to their high sensitivity, specificity, repeatability, and stability. With the development of nanotechnology, graphene oxide (GO) has been increasingly introduced into the construction of fluorescent biosensors to enhance their performance owing to its unique physicochemical properties.

RESULTS

This review systematically summarizes the development of GO-based fluorescent biosensors for the detection of pathogenic bacteria. First, we introduce the functionalization and modification of GO. The design and signal amplification strategies for GO-based fluorescent biosensors are also discussed. Finally, we explore the challenges and new perspectives associated with this field, with the aim of facilitating the development of GO-based fluorescent sensing technologies to prevent the spread of multidrug-resistant bacteria.

SIGNIFICANCE

This review will aid in the development of high-performance biosensors for pathogenic bacterial assays.

One-step cascade amplification system based on entropy-driven catalysis and DNAzyme triggered DNA walker for label-free detection of acetamiprid

Herein, an electrochemical aptasensor for highly sensitive detection of acetamiprid (ACE) was constructed based on a one-step cascade amplification strategy. This innovative strategy integrated DNA walker containing DNAzyme sequence into entropy-driven catalysis (EDC) system. The trigger strand was released by aptamer-specific binding to ACE, initiating the EDC amplification circuit and delivering DNA walker strands. The dangling DNA walker continuously bound and cleaved hairpin substrate to form G-quadruplex fragments with the assistance of Mg2+. The G-quadruplex fragments folded and captured hemin to form multitudinous G-quadruplex/hemin complexes in the presence of K+, generating significantly enhanced current, enabling enzyme-free, label-free and highly sensitive detection of ACE, with a linear detection range of 100 fM to 50 nM and a detection limit of 68.36 fM (S/N = 3). The constructed aptasensor achieved the reliable detection of ACE in vegetable soil and cucumber samples, demonstrating its potential application prospects in environmental protection and food supervision.

Dual-modal improved biosensing platform for sugarcane smut pathogen based on biological enzyme-Mg2+ DNAzyme coupled with DNA transporter cascading hybridization chain reaction

Sugarcane smut is a major disease affecting the yield and quality of sugarcane, and its early detection is crucial for the healthy development of sugarcane industry. In this work, a dual-modal biosensing platform is designed based on Au-V-MOF and 3D DNA walker for highly sensitive and precise detection of the sugarcane smut pathogen. This detection system utilizes the catalytic properties of biocatalysts and the precise cleavage of DNAzymes, along with 3D DNA walker nanotechnology and a designed "walking track", to achieve amplified detection signals and accurate target recognition. The detection platform utilizes catalytic hairpin assembly for target recycling. Output strand T1 interacts with DNAzyme via a 3D transporter, cleaving S1 in Mg2+ presence. This triggers cascading hybridization chain reaction to form long double-stranded DNA structures that absorb substantial methylene blue (MB). This amplifies the electrical signal and causes a proportional color change due to the redox reaction of MB, which enables electrochemical and colorimetric detection of the target. The method shows a linear response range from 0.0001 to 10,000 pM with a detection limit of 56.76 aM (S/N = 3). It features high sensitivity, specificity, and accuracy, which offers significant potential for early warning and precise detection of sugarcane smut.

Enzyme-Assisted Solid-Phase Microextraction Coupled with a DNA Nanowalker for Dual-Amplified Detection of Chloramphenicol in Animal-Derived Food Products

Chloramphenicol (CAP), an aminoalcohol antibiotic, exerts its action on bacterial ribosomes, thereby obstructing protein synthesis. However, the use of CAP in husbandry may lead to its excessive accumulation in animal-derived food products. This presents potential risks to consumer health. This study developed a novel dual-amplification fluorescence detection method by integrating enzyme-assisted solid-phase microextraction (SPME) with a Fe3O4@Au NP-based DNA nanowalker for the detection of CAP in food. The combination of a quartz rod-based SPME biosensor and DNA nanowalker effectively eliminated matrix interference, enabling the conversion of CAP and enhancement of detection signals through two cyclic amplification processes. The strategy demonstrated high sensitivity with a limit of detection of 28.1 aM as well as a wide linear range from 0.1 fM to 1 nM (with R2 > 0.99). This method also demonstrates robust stability and accuracy in detecting trace amounts of CAP in both authentic and prepared positive samples.

Ultrasensitive detection of circulating tumor DNA using a CRISPR/Cas9 nickase-driven 3D DNA walker based on a COF-AuNPs sensing platform

A electrochemical biosensor was designed utilizing a CRISPR Cas9n-driven DNA walker combined with gold-nanosphere-like covalent organic frameworks (COFs-AuNPs) to detect breast cancer markers (PIK3CA E545K ctDNA). The DNA walker probe is activated only in the presence of circulating tumor deoxyribonucleic acid (ctDNA), binding to a support probe to form a double strand that is then specifically cleaved by the Cas9n/sgRNA complex. This cleavage produces numerous DNA fragments for signal amplification. The COF-AuNPs as electrode materials facilitate electronic transfer and provide additional active sites for the immobilization of nucleic acid probes. This setup achieves a detection limit of 1.76 aM, demonstrating high sensitivity. Additionally, Cas9n improves the specificity of the sensor, accurately distinguishing a pair of base-mismatched sequences, and reducing the occurrence of false positives. Overall, the sensor exhibits excellent selectivity, reproducibility, and potential for early diagnosis of breast cancer.

A recognition-induced three-dimensional bipedal DNA walker for highly sensitive detection of APE1

In contrast to the unipedal DNA walker, a bipedal DNA walker features a broader walking area and exhibits faster walking kinetics, leading to enhanced amplification efficiency. In this study, we designed a stochastic three-dimensional (3D) bipedal DNA walker, capable of navigating AuNP-based 3D tracks, driven by exonuclease III (Exo III). This detection system enables the linear detection of the non-invasive biomarker apurinic/apyrimidinic endonuclease 1 (APE1) activity across a range of 0 to 120 U per mL, with a detection limit of 0.03 U per mL. The platform not only offers a novel DNA walker for sensitive APE1 detection in cell lysate but also facilitates the precise assessment of NCA's inhibitory effect on APE1. This research holds promise for future screening of other potential APE1 inhibitors.

Immobilization-free and label-free electrochemical DNA biosensing based on target-stimulated release of redox reporter and its catalytic redox recycling

Herein, we demonstrate a simple, homogenous and label-free electrochemical biosensing system for sensitive nucleic acid detection based on target-responsive porous materials and nuclease-triggered target recycling amplification. The Fe(CN)63- reporter was firstly sealed into the pores of Fe3O4 nanoparticles by probe DNA. Target DNA recognition triggered the controllable release of Fe(CN)63- for the redox reaction with the electron mediator of methylene blue enriched in the dodecanethiol assembled electrode and thereby generating electrochemical signal. The exonuclease III (Exo III)-assisted target recycling and the catalytic redox recycling between Fe(CN)63- and methylene blue contributed for the enhanced signal response toward target recognition. The low detection limit toward target was obtained as 478 fM and 1.6 pM, respectively, by square wave voltammetry and cyclic voltammetry methods. It also possessed a well-discrimination ability toward mismatched strands and high tolerance to complex sample matrix. The coupling of bio-gated porous nanoparticles, nuclease-assisted target amplification and catalytic redox recycling afforded the sensing system with well-controllable signal responses, sensitive and selective DNA detection, and good stability, reusability and reproducibility. It thus opens a new avenue toward the development of simple but sensitive electrochemical biosensing platform.

Using AuNPs-DNA Walker with Fluorophores Detects the Hepatitis Virus Rapidly

Viral hepatitis is a systemic infectious diseases caused by various hepatitis viruses, primarily leading to liver damage. It is widely prevalent worldwide, with hepatitis viruses categorized into five types: hepatitis A, B, C, D, and E, based on their etiology. Currently, the detection of hepatitis viruses relies on methods such as enzyme-linked immunosorbent assay (ELISA), immunoelectron microscopy to observe and identify viral particles, and in situ hybridization to detect viral DNA in tissues. However, these methods have limitations, including low sensitivity, high error rates in results, and potential false negative reactions due to occult serum infection conditions. To address these challenges, we have designed an AuNPs-DNA walker method that uses gold nanoparticles (AuNPs) and complementary DNA strands for detecting viral DNA fragments through a colorimetric assay and fluorescence detection. The DNA walker, attached to gold nanoparticles, comprises a long walking strand with a probe sequence bound and stem-loop structural strands featuring a modified fluorescent molecule at the 3' end, which contains the DNAzyme structural domain. Upon the addition of virus fragments, the target sequence binds to the probe chains. Subsequently, the long walking strand is released and continuously hybridizes with the stem-loop structural strand. The DNAzyme undergoes hydrolytical cleavage by Mg2+, breaking the stem-loop structural strand into linear single strands. As a result of these structural changes, the negative charge density in the solution decreases, weakening spatial repulsion and rapidly reducing the stability of the DNA walker. This leads to aggregation upon the addition of a high-salt solution, accompanied by a color change. Virus typing can be performed through fluorescence detection. The innovative method can detect DNA/RNA fragments with high specificity for the target sequence, reaching concentrations as low as 1 nM. Overall, our approach offers a more convenient and reliable method for the detection of hepatitis viruses.

An extracellular vesicle microRNA-initiated 3D DNAzyme motor for colorectal cancer diagnosis

MicroRNA is regarded as a significant biomarker for cancer diagnosis, disease process evaluation and therapeutic guidance, and dual-parameter measurement may contribute to a more accurate and realistic assessment. To meet the urgent need for simultaneous detection of multiple biomarkers, we combined three-dimensional DNAzyme motors with single molecule imaging technique to construct a convenient, intuitive, and sensitive approach for the simultaneous detection of dual miRNAs in the free state or in extracellular vesicles. Quantification of target miRNAs can be realized through the detection of amplified fluorescence signals generated by the target miRNA-initiated cleavage of fluorescent substrate strands by the DNAzyme motors. The practicability was systematically validated with microRNA-21-5p and microRNA-10b-5p as targets, acquiring a satisfactory sensitivity sufficient to detect low abundance targets at 0.5 or 1 pM to 100 pM. Besides, the extracellular vesicular miRNAs can be conveniently detected without extraction. The clinical applicability was verified with a series of extracellular vesicles from clinical samples, which exhibited good distinguishability between colorectal cancer patients and healthy donors. In addition to the advantages of good specificity and high sensitivity, the system has potential to be easily adapted by minor alteration of the DNA sequences and fluorophore sets for detection of multiple miRNAs and even other types of biomarkers such as proteins. Therefore, it shows promise to be widely applied in various fields such as early diagnosis of cancer and its prognostic assessment.

Enzyme-free and rapid colorimetric analysis of osteopontin via triple-helix aptamer probe coupled with catalytic hairpin assembly reaction

BACKGROUND

Osteopontin (OPN) is closely associated with tumorigenesis, growth, invasion, and immune escape and it serves as a plasma biomarker for hepatocellular carcinoma (HCC). Nevertheless, the accurate and rapid detection of low-abundance OPN still poses significant challenges. Currently, the majority of protein detection methods rely heavily on large precision instruments or involve complex procedures. Therefore, developing a simple, enzyme-free, rapid colorimetric analysis method with high sensitivity is imperative.

RESULTS

In this study, we have developed a portable colorimetric biosensor by integrating the triple-helix aptamer probe (THAP) and catalytic hairpin assembly (CHA) strategy, named as T-CHA. After binding to the OPN, the trigger probe can be released from THAP, then initiates the CHA reaction and outputs the signal through the formation of a G-quadruplex/Hemin DNAzyme with horseradish peroxidase-like activity. Consequently, this colorimetric sensor achieves visual free-labeled detection without additional fluorophore modification and allows for accurate quantification by measuring the optical density of the solution at 650 nm. Under optimal conditions, the logarithmic values of various OPN concentrations exhibit satisfactory linearity in the range of 5 pg mL-1 to 5 ng mL-1, with a detection limit of 2.04 pg mL-1. Compared with the widely used ELISA strategy, the proposed T-CHA strategy is rapid (∼105 min), highly sensitive, and cost-effective.

SIGNIFICANCE

The T-CHA strategy, leveraging the low background leakage of THAP and the high catalytic efficiency of CHA, has been successfully applied to the detection of OPN in plasma, demonstrating significant promise for the early diagnosis of HCC in point-of-care testing. Given the programmability of DNA and the universality of T-CHA, it can be readily modified for analyzing other useful tumor biomarkers.

Dual-driven AND molecular logic gates for label-free and sensitive ratiometric fluorescence sensing and inhibitors screening

Due to the complexity of regulatory networks of disease-related biomarkers, developing simple, sensitive, and accurate methods has remained challenging for precise diagnosis. Herein, an "AND" logic gates DNA molecular machine (LGDM) was constructed, which was powered by the catalytic hairpin assembly (CHA). It was coupled with dual-emission CdTe quantum dots (QDs)-based cation exchange reaction (CER) for label-free, sensitive, and ratiometric fluorescence detection of APE1 and miRNA biomarkers. Benefiting from synergistic signal amplification strategies and a ratiometric fluorometric output mode, this LGDM enables accurate logic computing with robust and significant output signals from weak inputs. It offers improved sensitivity and selectivity even in cell extracts. Using dual-emission spectra CdTe QDs, with a ratiometric signal output mode, ensured good stability and effectively prevented false-positive signals from intrinsic biological interferences compared to the approach relying on a single signal output mode, which enabled the LGDM to achieve rapid, efficient, and accurate natural drug screening against APE1 inhibitors in vitro and cells. The developed method provides impetus to streamline research related to miRNA and APE1, offering significant promise for widespread application in drug development and clinical analysis.

Pushing Forward the DNA Walkers in Connection with Tumor-Derived Extracellular Vesicles

Extracellular vesicles (EVs) are microparticles released from cells in both physiological and pathological conditions and could be used to monitor the progression of various pathological states, including neoplastic diseases. In various EVs, tumor-derived extracellular vesicles (TEVs) are secreted by different tumor cells and are abundant in many molecular components, such as proteins, nucleic acids, lipids, and carbohydrates. TEVs play a crucial role in forming and advancing various cancer processes. Therefore, TEVs are regarded as promising biomarkers for the early detection of cancer in liquid biopsy. However, the currently developed TEV detection methods still face several key scientific problems that need to be solved, such as low sensitivity, poor specificity, and poor accuracy. To overcome these limitations, DNA walkers have emerged as one of the most popular nanodevices that exhibit better signal amplification capability and enable highly sensitive and specific detection of the analytes. Due to their unique properties of high directionality, flexibility, and efficiency, DNA walkers hold great potential for detecting TEVs. This paper provides an introduction to EVs and DNA walker, additionally, it summarizes recent advances in DNA walker-based detection of TEVs (2018-2024). The review highlights the close relationship between TEVs and DNA walkers, aims to offer valuable insights into TEV detection and to inspire the development of reliable, efficient, simple, and innovative methods for detecting TEVs based on DNA walker in the future.

Efficient DNA walker guided by ordered cruciform-shaped DNA track for ultrasensitive and rapid electrochemical detection of lead ion

The rational design of DNA tracks is an effective pathway to guide the autonomous movement and high-efficiency recognition in DNA walkers, showing outstanding advantages for the cascade signal amplification of electrochemical biosensors. However, the uncontrolled distance between two adjacent tracks on the electrode could increase the risk of derailment and interruption of the reaction. Hence, a novel four-way balanced cruciform-shaped DNA track (C-DNT) was designed as a structured pathway to improve the effectiveness and stability of the reaction in DNA walkers. In this work, two kinds of cruciform-shaped DNA were interconnected as a robust structure that could avoid the invalid movement of the designed DNA walker on the electrode. When hairpin H2 was introduced onto the electrode, the strand displacement reaction (SDR) effectively triggered movements of the DNA walker along the cruciform-shaped track while leaving ferrocene (Fc) on the electrode, leading to a significant enhancement of the electrochemical signal. This design enabled the walker to move in an excellent organized and controllable manner, thus enhancing the reaction speed and walking efficiency. Compared to other walkers moving on random tracks, the reaction time of the C-DNT-based DNA walker could be reduced to 20 min. Lead ion (Pb2+) was used as a model target to evaluate the analytical performance of this biosensor, which exhibited a low detection limit of 0.033 pM along with a wide detection ranging from 0.1 pM to 500 nM. This strategy presented a novel concept for designing a high-performance DNA walker-based sensing platform for the detection of contaminants.

DNA-Based Molecular Machines: Controlling Mechanisms and Biosensing Applications

The rise of DNA nanotechnology has driven the development of DNA-based molecular machines, which are capable of performing specific operations and tasks at the nanoscale. Benefitting from the programmability of DNA molecules and the predictability of DNA hybridization and strand displacement, DNA-based molecular machines can be designed with various structures and dynamic behaviors and have been implemented for wide applications in the field of biosensing due to their unique advantages. This review summarizes the reported controlling mechanisms of DNA-based molecular machines and introduces biosensing applications of DNA-based molecular machines in amplified detection, multiplex detection, real-time monitoring, spatial recognition detection, and single-molecule detection of biomarkers. The challenges and future directions of DNA-based molecular machines in biosensing are also discussed.

Host-Guest Recognition-Mediated Supramolecular Aggregation-Induced Electrochemiluminescence of Iridium(III) Complexes for Nucleic Acid Bioassay

Currently reported aggregation-induced electroluminescence (AIECL) is usually based on the electrostatic integration of luminous monomers, and its application is still limited by the low ECL efficiency and poor structural stability of electrostatic integration-based AIECL emitters. Herein, host-guest recognition-mediated supramolecular AIECL was creatively developed to overcome the defects of electrostatic-integration-based AIECL. Cucurbit[8]uril (CB[8]) as the host recognized tris (2-phenylpyridine) iridium(III) [Ir(ppy)3] as the guest to form a novel supramolecular complex Ir-CB[8]. CB[8] can not only provide a large hydrophobic cavity to efficiently load Ir(ppy)3 and enrich coreactant tripropylamine but also utilize its carbonyl-laced portals to form intramolecular hydrogen bonds to stabilize the supramolecular structure, so Ir-CB[8] revealed excellent AIECL performance. The AIECL emitter Ir-CB[8] coupled the efficient DNA walker to construct a sensing system for miRNA-16 detection. Au nanoparticles@norepinephrine (AuNPs@NE) trapped by single-strand S1 was developed to significantly quench the ECL emission of Ir-CB[8]. When the target microRNA-16 (miRNA-16) existed, H1 was opened and the sequential assembly from H2 to H7 was triggered, forming "windmill"-like DNA walker with six Pb2+-dependent leg DNA. The assembled DNA walker, which was centered on DNA structure, had high efficiency and biocompatibility and can cut S1 to keep the DNA fragment-carrying quencher AuNPs@NE away from the electrode surface, thus restoring the ECL emission of Ir-CB[8] and realizing ultrasensitive detection of miRNA-16. Supramolecular AIECL mediated by host-guest recognition provides a new way for constructing AIECL emitters with excellent structural stability and AIECL efficiency, and an Ir-CB[8] coupling "windmill"-like DNA walker builds a promising ECL-sensing system for bioassay.

2-Aminopurine-based quencher-free DNA tweezers with fluorescence properties well tuned by surrounding bases

Reversible structural changes in DNA nanomachines have great potential in the field of bioanalysis. Here, we demonstrate an assembly strategy for quencher-free and tunable DNA tweezers based on 2-aminopurine (2-AP), avoiding the tedious fluorescence labelling step. The conformational state of the tweezers could be controlled by specific oligonucleotides (fuel or anti-fuel). Taking advantage of the local environmental sensitivity of 2-AP, the structural changes of the tweezers were easily tracked, and multiple cyclic switching of the tweezers between the open and closed states was achieved. In addition, the influence of oligonucleotide structure on the fluorescence properties of 2-AP was deeply explored. We figured out that the fluorescence of 2-AP was highly quenched by the base-stacking of natural bases in DNA oligonucleotides. Moreover, by comprehensively regulating the type of bases surrounding the inserted 2-AP site, a sensitive fluorescence response towards dynamic change can be obtained. This principle of quencher-free nanodevices based on 2-AP provides a convenient method for monitoring the structural changes of DNA nanomachines.

DNA Polymerase-Steered Self-Propelled and Self-Enhanced DNA Walker for Rapid and Distinctly Amplified Electrochemical Sensing

The development of a simple, rapid, easy-to-operate, and ultrasensitive DNA walker-based sensing system is challenging but would be very intriguing for the enormous applications in biological analysis and disease monitoring. Herein, a new self-propelled and self-enhanced DNA walking strategy was developed on the basis of a simple DNA polymerase-steered conversion from a typical alternate DNA assembly process. The sensing platform was fabricated easily by immobilizing only one hairpin probe (H1) and the sensing process was based on a simple one-step mixing with another hairpin-like DNA probe (H2) and DNA polymerase. The DNA polymerization could achieve target recycling and successive DNA walking steps. Interestingly, along with each DNA walking step, the new DNA walker sequence could be autonomously accumulated for a self-enhanced DNA walking effect. This provided a multilevel signal amplification ability for the ultrasensitive detection of the target with a low detection limit of 0.18 fM. Moreover, it could greatly reduce the reaction time with the sensing process finished within 1 h. The detection selectivity and the applicative potential in a complicated biological matrix were also demonstrated. Furthermore, the flexible control of sensing modes (self-enhanced DNA walking or the alternate DNA assembly) by using DNA polymerase or not offered a powerful means for sensing performance modulation. It thus opens a new avenue toward the development of a DNA walker-based sensing platform with both rapid and ultrasensitive features and might hold a huge potential for point-of-care diagnostic applications.

Strategy of functional nucleic acids-mediated isothermal amplification for detection of foodborne microbial contaminants: A review

Foodborne microbial contamination (FMC) is the leading cause of food poisoning and foodborne illness. The foodborne microbial detection methods based on isothermal amplification have high sensitivity and short detection time, and functional nucleic acids (FNAs) could extend the detectable object of isothermal amplification to mycotoxins. Therefore, the strategy of FNAs-mediated isothermal amplification has been emergingly applied in biosensors for foodborne microbial contaminants detection, making biosensors more sensitive with lower cost and less dependent on nanomaterials for signal output. Here, the mechanism of six isothermal amplification technologies and their application in detecting FMC is firstly introduced. Then the strategy of FNAs-mediated isothermal amplification is systematically discussed from perspectives of FNAs' versatility including recognition elements (Aptamer, DNAzyme), programming tools (DNA tweezer, DNA walker and CRISPR-Cas) and signal units (G-quadruplex, FNAs-based nanomaterials). Finally, challenges and prospects are presented in terms of addressing the issue of nonspecific amplification reaction, developing better FNAs-based sensing elements and eliminating food matrix effects.

Recent Advances in Biological Applications of Aptamer-Based Fluorescent Biosensors

Aptamers have been spotlighted as promising bio-recognition elements because they can be tailored to specific target molecules, bind to targets with a high affinity and specificity, and are easy to chemically synthesize and introduce functional groups to. In particular, fluorescent aptasensors are widely used in biological applications to diagnose diseases as well as prevent diseases by detecting cancer cells, viruses, and various biomarkers including nucleic acids and proteins as well as biotoxins and bacteria from food because they have the advantages of a high sensitivity, selectivity, rapidity, a simple detection process, and a low price. We introduce screening methods for isolating aptamers with q high specificity and summarize the sequences and affinities of the aptamers in a table. This review focuses on aptamer-based fluorescence detection sensors for biological applications, from fluorescent probes to mechanisms of action and signal amplification strategies.

DNA-Driven Dynamic Assembly/Disassembly of Inorganic Nanocrystals for Biomedical Imaging

DNA-mediated programming is emerging as an effective technology that enables controlled dynamic assembly/disassembly of inorganic nanocrystals (NC) with precise numbers and spatial locations for biomedical imaging applications. In this review, we will begin with a brief overview of the rules of NC dynamic assembly driven by DNA ligands, and the research progress on the relationship between NC assembly modes and their biomedical imaging performance. Then, we will give examples on how the driven program is designed by different interactions through the configuration switching of DNA-NC conjugates for biomedical applications. Finally, we will conclude with the current challenges and future perspectives of this emerging field. Hopefully, this review will deepen our knowledge on the DNA-guided precise assembly of NCs, which may further inspire the future development of smart chemical imaging devices and high-performance biomedical imaging probes.

Two colors, one-step, self-drive fluorescent strategy for chloramphenicol detection base on DNAzyme cleavage triggered hybridization chain reaction

A two colors, one-step, self-drive fluorescent strategy was developed for chloramphenicol (CAP) detection based on cyclic cleavage of molecular beacon (MB) by pincer DNA sequences. CAP can bind with its aptamer and active the enzyme-strand (E-DNA). Then the E-DNA can circularly cleave the MB on the both side of pincer DNA sequences. The cleaved fragments can self-assembly to form a long duplex and cause the great recovery of the two colors fluorescent signal. The limit of detection was as low as 0.7 pM. Importantly, the whole detection process is very simple with only one-step operation. Moreover, the two colors fluorescent signals can greatly enhance the accuracy of the result. It was also successfully used to detect CAP in actual samples.

Zr4+-mediated DNAzyme-driven DNA walker amplification strategy for electrochemical assay of protein kinase a activity and inhibition

Protein kinase A (PKA) can regulate many cellular biological processes by phosphorylation substrate peptide or protein. Sensitive detection of PKA activity is critical for the PKA-related drug discovery and disease diagnosis. A new electrochemical biosensing method was developed for detection of PKA activity based on Zr⁴⁺-mediated DNAzyme-driven DNA walker signal amplification strategy. In this strategy, the special designed substrate peptide and a thiolated methylene blue-labeled hairpin DNA (MB-hpDNA) containing a single ribonucleic acid group (rA) could be anchored on the surface of gold electrode by Au-S bond. In the presence of adenosine triphosphate (ATP) and PKA, substrate peptide was phosphorylated and linked with walker DNA (WD) via the robust phosphate-Zr⁴⁺-phosphate chemistry. The linked WD hybridized with the loop region of MB-hpDNA to form a Mn²⁺-dependent deoxynuclease (DNAzyme), which cleaved the MB-hpDNA into MB-labeled fragment releasing away from electrode surface, resulting in a dramatic decrease of electrochemical signal and providing an electrochemical sensing platform for PKA activity detection. The response signal of the developed biosensor is proportional to the logarithm of PKA concentration in the range of 0.05 U mL^-1 to 100 U mL^-1, with a detection limit of 0.017 U mL^-1 at a signal to noise ratio of 3. Furthermore, the proposed method can also be applied for the evaluation of PKA inhibition and PKA activity assay in cell samples. Therefore, the proposed biosensor shows great promise as a universal tool for diagnostics and drug discovery of PKA-related diseases.

Accurate and rapid quantification of PD-L1 positive exosomes by a triple-helix molecular probe

Programmed death ligand-1 (PD-L1) positive exosomes (P-Exo) have been widely used for tumor diagnosis. However, accurate and rapid quantification of P-Exo remains challenging due to the heterogeneity of clinical individuals and isolation techniques. In this study, the triple-helix molecular probe (THMP) coupled with high-affinity silica-based TiO₂ magnetic beads was used to isolate exosomes and to analyze the relative abundance of P-Exo in total exosomes (T-Exo). By employing this strategy, the entire analysis was completed within 70 min and the detection limit for P-Exo was 880 particles μL^-1. Additionally, the relative abundance of P-Exo in T-Exo (RA_P-Exo/T-Exo) was calculated from their fluorescence ratio, which could avoid errors due to differences in samples and separation methods, and identify 1.5 × 10³ P-Exo from 5 × 10⁶ T-Exo per microliter. RA_P-Exo/T-Exo values were not only effective in distinguishing healthy volunteers from breast cancer patients, but also highly positively correlated with the stage of breast carcinoma. Overall, this strategy opens a new avenue for rapid and quantitative analysis of P-Exo, providing an opportunity for precise diagnosis and prediction of treatment efficacy in cancer.

A fluorescent aptasensor for ATP based on functional DNAzyme/walker and terminal deoxynucleotidyl transferase-assisted formation of DNA-AgNCs

The development of sensitive adenosine triphosphate (ATP) sensors is imperative due to the tight relationship between the physiological conditions and ATP levels in vivo. Herein, a fluorescent aptasensor for ATP is presented, which adopts a strategy that combines a split aptamer and a DNAzyme/walker with terminal deoxynucleotidyl transferase (TDT)-assisted formation of DNA-AgNCs to realize fluorescence detection of ATP. A multifunctional oligonucleotide sequence is rationally designed, which integrates a split aptamer, a DNAzyme and a DNA walker. Both multifunctional oligonucleotide and its substrate strand are connected to the surface of Fe₃O₄@Au nanoparticles via Au-S bonds. The existence of ATP can induce the formation of the complete aptamer, and then activate the DNAzyme to circularly cleave the substrate strand, leaving 2',3'-cyclophosphate at the 3'end of the strand. This blocks the polymerization of dCTP to form poly(C) even in the presence of TDT and dCTP, due to the lack of free 3'-OH. In contrast, when ATP is absent, the DNAzyme/walker cannot work and then TDT catalyzes the formation of poly(C) at the free 3'-OH of the substrate strand, which is subsequently utilized as the template to prepare DNA-AgNCs. The fluorescence response derived from AgNCs thus reflects the ATP concentration. Under the optimum conditions, the aptasensor shows a linear response range from 5 nM to 10 000 nM, with a detection limit of 0.27 nM. The level of ATP in human serum can be effectively measured by the aptasensor with good recovery, indicating its application potential in medical samples.

Hydrogen Bonding Nanoarchitectonics of Organic Pigment-Based Janus Microrobots with Entering Capability into Cancer Cells

Autonomous microrobots are at the forefront of biomedical research as they are expected to be applied for specific tasks at the intracellular level such as cargo delivery, sensing, molecular manipulation, among others. Here, we report on a preparation of microrobots based on quinacridone and indigo, which are members of the organic hydrogen-bonded pigment family. The microrobots were fabricated by asymmetric platinum deposition on corresponding quinacridone and indigo microparticles that possessed a homogeneous size and shape distribution. The microrobots exhibited autonomous locomotion in the presence of hydrogen peroxide, which was further supported by UV irradiation. The organic pigment-based microrobots were studied in the presence of mouse colorectal carcinoma cells, and it was observed that they were internalized into the cells. Internalization was visualized using confocal laser scanning microscopy. This study reveals the possibility of fabricating hydrogen-bonded organic pigment-based microrobots for biomedical applications by employing the principles of nanoarchitectonics.

Recent Advances in Detection for Breast-Cancer-Derived Exosomes

Breast cancer is the most common malignant tumor in women, its incidence is secret, and more than half of the patients are diagnosed in the middle and advanced stages, so it is necessary to develop simple and efficient detection methods for breast cancer diagnosis to improve the survival rate and quality of life of breast cancer patients. Exosomes are extracellular vesicles secreted by all kinds of living cells, and play an important role in the occurrence and development of breast cancer and the formation of the tumor microenvironment. Exosomes, as biomarkers, are an important part of breast cancer fluid biopsy and have become ideal targets for the early diagnosis, curative effect evaluation, and clinical treatment of breast cancer. In this paper, several traditional exosome detection methods, including differential centrifugation and immunoaffinity capture, were summarized, focusing on the latest research progress in breast cancer exosome detection. It was summarized from the aspects of optics, electrochemistry, electrochemiluminescence and other aspects. This review is expected to provide valuable guidance for exosome detection of clinical breast cancer and the establishment of more reliable, efficient, simple and innovative methods for exosome detection of breast cancer in the future.

DNA walking system integrated with enzymatic cleavage reaction for sensitive surface plasmon resonance detection of miRNA

Abnormal expression levels of miRNA are associated with various tumor diseases, for example, glioma tumors are characterized by the up-regulation of miRNA-182. Surface plasmon resonance (SPR) assay for miRNA-182 from glioma patients was performed via DNA walking amplification strategy. The duplex between aminated swing arm DNA (swDNA) and block DNA (blDNA), and aminated track DNA (trDNA) with a biotin tag were tethered on the poly(ethylene glycol) (PEG)-modified chips. Upon formation of miRNA/blDNA duplex, the SPR signal decreased with the walking process of swDNA, as the biotinylated fragment of trDNA (biotin-TTGGAGT) was detached from the sensor surface caused by the nicking endonuclease Nb.BbvCI. Such a repeated hybridization and cleavage cycle occurred continuously and the detachment of more biotinylated fragments of trDNA from the chips led to the attachment of fewer streptavidin (SA) molecules and then smaller SPR signals. MiRNA-182 with concentrations ranging from 5.0 fM to 1.0 pM could be readily determined and a detection limit of 0.62 fM was achieved. The proposed method was highly selective and possessed remarkable capability for evaluating the expression levels of miRNA-182 in serum samples from healthy donors and glioma patients. The sensing protocol holds great promise for early diagnosis of cancer patients.

Smart Programmable Scalable Dual-Mode Diagnostic Logic Nanoflare Strategy for Dual-Tumor Marker Detection

Compared with the single-marker detection scheme, the detection of multiple targets in the complex cell and biological environment can obtain more reliable detection results. Herein, we detected miRNA-21 and APE1 in two modes, AND and OR, respectively, based on gold nanoflares and simple logic components. In both modes, DNAzyme and APE1 can get rich fluorescence recovery results by breaking the DNA strands from the gold nanorods (AuNRs) and unquenching under different conditions. In vivo and in vitro experiments suggest that both nanoflares exhibit excellent biocompatibility and make efficient and sensitive judgments on the two targets. This strategy emphasizes the reuse nature of enzymes, and a small amount of target can generate a large amount of fluorescent signal in the logic device, which greatly reduces the detection limit when monitoring low-abundance targets. Since the short-stranded DNA component of the detection device is simple in composition and easy to program its probe sequence, it can be expanded into a detection system for the detection of other sets of related markers, which increases its potential for clinical application.

A cascade amplification strategy for ultrasensitive Salmonella typhimurium detection based on DNA walker coupling with CRISPR-Cas12a

Salmonella typhimurium (S. typhimurium) infection is one of leading causes of severe foodborne illness, which poses grievous threats to public health. Thus, the detection with ultra-sensitivity is highly demanded for timely prevention and diagnosis of S. typhimurium. In this study, we developed a novel detection machinery based on DNA walker and CRISPR (Clustered Regularly Interspaced Short Palindromic Repeats)-Cas12a technologies. Mechanistically, the S. typhimurium specific sequence triggers Nt.AlwI nicking endonuclease and produces particular signaling nucleotide, which further activates Cas12a for strong fluorescence signal output. This cascade amplification strategy exhibits excellent specificity and successfully decreases the limit of detection (LOD) of DNA walker by 2,000 folds to 5 CFU/mL. Collectively, this combinatorial approach offers great promises to effectively reduce foodborne diseases by ultrasensitive detection of S. typhimurium. As a proof of concept, this innovative design also shows prominent potential in detections of other biomolecules, cells and pathogens.

DNA Walkers for Biosensing Development

The ability to design nanostructures with arbitrary shapes and controllable motions has made DNA nanomaterials used widely to construct diverse nanomachines with various structures and functions. The DNA nanostructures exhibit excellent properties, including programmability, stability, biocompatibility, and can be modified with different functional groups. Among these nanoscale architectures, DNA walker is one of the most popular nanodevices with ingenious design and flexible function. In the past several years, DNA walkers have made amazing progress ranging from structural design to biological applications including constructing biosensors for the detection of cancer-associated biomarkers. In this review, the key driving forces of DNA walkers are first summarized. Then, the DNA walkers with different numbers of legs are introduced. Furthermore, the biosensing applications of DNA walkers including the detection- of nucleic acids, proteins, ions, and bacteria are summarized. Finally, the new frontiers and opportunities for developing DNA walker-based biosensors are discussed.

Engineering DNA walkers for bioanalysis: A review

Considerable advances have been made in the design, modularization, functionalization, and regulation of DNA nanostructures over the past 40 years. These advances have accelerated the development of DNA nanomachines such as DNA walkers, dynamic nanomachines with walking feet, tracks, and driven forces, which have highly sensitive detection and signal amplification abilities that can be applied to various bioanalytical contexts and therapeutic strategies. Here, we describe a rational design of the nano-bio interface, the kinetics of DNA walkers and the strategies for improving their efficiency and sensitivity. We also outline the various bioanalytic and imaging applications to which DNA walkers have been applied, such as electrochemical and optical measurements, when integrated with other simulation and activation tools. Finally, we compare the performances of novel DNA walker-based strategies for bioanalysis and propose a method to improve DNA walker design.

A FEN 1-assisted swing arm DNA walker for electrochemical detection of ctDNA by target recycling cascade amplification

A flap endonuclease 1 (FEN 1)-assisted swing arm DNA walker was constructed to achieve the signal amplification detection of ctDNA. The MB-labeled hairpin DNA was designed as the track and a long swing-arm DNA strand as the capture probe. The introduction of ctDNA unlocked a helper hairpin DNA, which could be captured to form the DNA duplex walker with the capture probe, and also activated the catalyst hairpin assembly. The DNA duplex walker opened the hairpin track and formed a three-base overlapping DNA structure, which was recognized and cleaved by FEN 1. Driven by the FEN 1 and the high reaction temperature, the DNA walker was initiated to hybridize with the track DNA and release multiple MB-labeled flaps for signal amplification. Owing to the excellent amplification capacity of the target recycling-induced DNA walker and programmed catalysis hairpin assembly, the one-step biosensor showed a linear detection range from 1 fM to 100 pM with a detection limit of 0.33 fM. Moreover, the sensitive detection of ctDNA in serum samples was verified, suggesting its potential application in liquid biopsy for clinical diagnosis.

Chaperone Copolymer Assisted G-Quadruplex-Based Signal Amplification Assay for Highly Sensitive Detection of VEGF

Vascular endothelial growth factor (VEGF) is a critical biomarker in the angiogenesis of several cancers. Nowadays, novel approaches to rapid, sensitive, and reliable VEGF detection are urgently required for early cancer diagnosis. Cationic comb-type copolymer, poly(L-lysine)-graft-dextran (PLL-g-Dex) accelerates DNA hybridization and chain exchange reaction while stabilizing the DNA assembly structure. In this work, we examined the chaperone activity of PLL-g-Dex to assist G-quadruplex-based fluorescent DNA biosensors for sensitive detection of VEGF. This convenient and effective strategy is based on chitosan hydrogel, c-myc, Thioflavin T (ThT), VEGF aptamer, and its partially complementary strand. The results show that chaperone copolymer PLL-g-Dex significantly promotes the accumulation of G-quadruplex and assembles into G-wires, allowing an effective signal amplification. Using this method, the detection limit of VEGF was as low as 23 pM, better than many previous works on aptamer-based VEGF detection. This chaperone copolymer-assisted signal amplification strategy has potential applications in the highly sensitive detection of target proteins, even including viruses.

Upconversion Luminescence-Initiated and GSH-Responsive Self-Driven DNA Motor for Automatic Operation in Living Cells and In Vivo

In light of the worthy design flexibility and the good signal amplification capacity, the recently developed DNA motor (especially the DNA walker)-based fluorescent biosensors can offer an admirable choice for realizing bioimaging. However, this attractive biosensing strategy not only has the disadvantage of uncontrollable initiation but also usually demands the supplement of exogenous driving forces. To handle the above obstacles, some rewarding solutions are proposed here. First, on the surface of an 808 nm near-infrared light-excited low-heat upconversion nanoparticle, a special ultraviolet upconversion luminescence-initiated three-dimensional (3D) walking behavior is performed by embedding a photocleavage linker into the sensing elements, and such light-controlled target recognition can perfectly overcome the pre-triggering of the biosensor during the biological delivery to significantly boost the sensing precision. After that, a peculiar self-driven walking pattern is constructed by employing MnO₂ nanosheets as an additional nanovector to physically absorb the sensing frame, for which the reduction of the widespread glutathione in the biological medium can bring about sufficient self-supplied Mn²⁺ to guarantee the walking efficiency. By selecting an underlying next-generation broad-spectrum cancer biomarker (survivin messenger RNA) as the model target, we obtain that the newly formed autonomous 3D DNA motor shows a commendable sensitivity (where the limit of detection is down to 0.51 pM) and even an outstanding specificity for distinguishing single-base mismatching. Beyond this sound assay performance, our sensing approach is capable of working as a powerful imaging platform for accurately operating in various living specimens such as cells and bodies, showing a favorable diagnostic ability for cancer care.

Dual CHA-mediated high-efficient formation of a tripedal DNA walker for constructing a novel proteinase-free dual-mode biosensing strategy

DNA walkers have been recognized as a type of powerful signal amplification tool for biosensors, but how to adopt a proper strategy to increase their amplification efficiency is still highly desirable. Herein we design a dual-catalytic hairpin assembly (CHA)-mediated strategy for the high-efficient formation of a tripedal Mg²⁺-dependent DNAzyme (MNAzyme)-DNA walker, and thus develop a novel proteinase-free dual-mode biosensing method for the kanamycin (Kana) antibiotic assay. The first CHA is initiated by a target-biorecognition reaction, which can produce the DNA walker and also induce the target recycling. The second CHA is initiated by a special base sequence designed as a one-half substrate of the MNAzyme. Upon the first CHA-triggered DNA walking at a magnetic bead (MB) track, this "pseudo-target" sequence can be released to induce another CHA-cycle for the formation of the same DNA walker. Meanwhile, the other one-half substrate strand exposed on the MB surface will trigger the quantitative hybridization chain reaction (HCR)-assembly of a G-quadruplex DNAzyme (G-DNAzyme)-enriched double-stranded DNA polymer. So the enzymatic reaction of G-DNAzymes enabled the convenient colorimetric and photoelectrochemical dual-mode signal transduction of the method. Due to the dual-CHA facilitation to the tripedal and three-dimensional DNA walking and synergetic signal amplification of HCR, this method exhibits very low detection limits of 9.4 and 0.55 fg mL^-1, respectively. In combination with its wide linear range, automated manipulation, and excellent selectivity, repeatability and reliability, the proposed method is expected to be used for the convenient semiquantitative screening and accurate determination of possible antibiotic residues in complicated matrices.

Light-Activated and Self-Driven Autonomous DNA Nanomachine Enabling Fluorescence Imaging of MicroRNA in Living Cells with Exceptional Precision and Efficiency

Owing to their favorable design flexibility and eminent signal amplification ability, DNA nanomachine-supported biosensors have provided an attractive avenue for intracellular fluorescence imaging, especially for DNA walkers. However, this promising option not only suffers from poor controllability but also needs to be supplied with additional driving forces on account of the frequent employment of metal ion-dependent DNAzymes. Aiming at overcoming these obstacles, we introduce some fruitful solutions. On one hand, innovative light-activated walking behavior induced by a photocleavage mode is established on the surfaces of gold nanoparticles, and such a photoselective sensing system can be perfectly prevented from pre-activating during the intracellular delivery process and made to achieve target identification only under irradiation using a moderate ultraviolet light source. On the other hand, this light-switchable sensing frame is encapsulated within a dissociable metal-organic framework (ZIF-8) to facilitate endocytosis and ensure sufficient internal cofactors (Zn²⁺) to realize a self-driven pattern in the acidic environment of the cell lysosome. Based on the abovementioned efforts, the newly constructed autonomous three-dimensional DNA walkers present satisfactory sensitivity (a limit of detection of down to 19.4 pM) and specificity (even distinguishing single-base changes) toward a model biomarker (microRNA-21). More importantly, the sensing method allows determination of the variations in targets in living cancer cells with exceptional precision and efficiency, offering a powerful assay platform for intracellular imaging.