A tailored extracellular matrix (ECM) - Mimetic coating for cardiovascular stents by stepwise assembly of hyaluronic acid and recombinant human type III collagen

Preparation and characterization of a novel humanized collagen III with repeated fragments of Gly300-Asp329

Recombinant human collagens have attracted intensive interest in the past two decades, demonstrating considerable potential in medicine, tissue engineering, and cosmetics. Several humanized recombinant collagens have been produced, exhibiting similar characteristics as the native species. To get insight into the structural and bioactive properties of different parts of collagen, in this study, the segment of Gly300-Asp329 of type III collagen was first adopted and repeated 18 times to prepare a novel recombinant collagen (named rhCLA). RhCLA was successfully expressed in E. coli, and a convenient separation procedure was established through reasonably combining alkaline precipitation and acid precipitation, yielding crude rhCLA with a purity exceeding 90%. Additionally, a polishing purification step utilizing cation exchange chromatography was developed, achieving rhCLA purity surpassing 98% and an overall recovery of approximately 120 mg/L culture. Simultaneously, the contents of endotoxin, nucleic acids, and host proteins were reduced to extremely low levels. This fragmented type III collagen displayed a triple-helical structure and gel-forming capability at low temperatures. Distinct fibrous morphology was also observed through TEM analysis. In cell experiments, rhCLA exhibited excellent biocompatibility and cell adhesion properties. These results provide valuable insights for functional studies of type III collagen and a reference approach for the large-scale production of recombinant collagens.

Extracellular Matrix-Mimetic Intrinsic Versatile Coating Derived from Marine Adhesive Protein Promotes Diabetic Wound Healing through Regulating the Microenvironment

The management of diabetic wound healing remains a severe clinical challenge due to the complicated wound microenvironments, including abnormal immune regulation, excessive reactive oxygen species (ROS), and repeated bacterial infections. Herein, we report an extracellular matrix (ECM)-mimetic coating derived from scallop byssal protein (Sbp9Δ), which can be assembled in situ within 30 min under the trigger of Ca2+ driven by strong coordination interaction. The biocompatible Sbp9Δ coating and genetically programmable LL37-fused coating exhibit outstanding antioxidant, antibacterial, and immune regulatory properties in vitro. Proof-of-concept applications demonstrate that the coating can reliably promote wound healing in animal models, including diabetic mice and rabbits, ex vivo human skins, and Staphylococcus aureus-infected diabetic mice. In-depth mechanism investigation indicates that improved wound microenvironments accelerated wound repair, including alleviated bacterial infection, lessened inflammation, appearance of abundant M2-type macrophages, removal of ROS, promoted angiogenesis, and re-epithelialization. Collectively, our investigation provides an in situ, convenient, and effective approach for diabetic wound repair.

Recombination humanized type III collagen promotes oral ulcer healing

OBJECTIVE

Recombinant humanized type III collagen (rhCol III) is a highly adhesive biomaterial composed of 16 adhesion-related tandem repeats refined from human type III collagen. Here, we aimed to investigate the effect of rhCol III on oral ulcers and reveal the underlying mechanism.

METHODS

Acid-induced oral ulcers were induced on the murine tongue, and rhCol III or saline drops were administered. The effect of rhCol III on oral ulcers was assessed using gross and histological analyses. The effects on the proliferation, migration, and adhesion of human oral keratinocytes were investigated in vitro. The underlying mechanism was explored using RNA sequencing.

RESULTS

Administration of rhCol III accelerated the lesion closure of oral ulcers, reduced the release of inflammatory factors, and alleviated pain. rhCol III promoted the proliferation, migration, and adhesion of human oral keratinocytes in vitro. Mechanistically, the enrichment of genes associated with the Notch signaling pathway was upregulated after rhCol III treatment.

CONCLUSION

rhCol III promoted the healing of oral ulcers, showing promising therapeutic potential in oral clinics.

REDV-Functionalized Recombinant Spider Silk for Next-Generation Coronary Artery Stent Coatings: Hemocompatible, Drug-Eluting, and Endothelial Cell-Specific Materials

Coronary artery stents are life-saving devices, and millions of these devices are implanted annually to treat coronary heart disease. The current gold standard in treatment is drug-eluting stents, which are coated with a biodegradable polymer layer that elutes antiproliferative drugs to prevent restenosis due to neointimal hyperplasia. Stenting is commonly paired with systemic antiplatelet therapy to prevent stent thrombosis. Despite their clinical success, current stents have significant limitations including inducing local inflammation that drives hyperplasia; a lack of hemocompatibility that promotes thrombosis, increasing need for antiplatelet therapy; and limited endothelialization, which is a critical step in the healing process. In this research, we designed a novel material for use as a next-generation coating for drug-eluting stents that addresses the limitations described above. Specifically, we developed a recombinant spider silk material that is functionalized with an REDV cell-adhesive ligand, a peptide motif that promotes specific adhesion of endothelial cells in the cardiovascular environment. We illustrated that this REDV-modified spider silk variant [eADF4(C16)-REDV] is an endothelial-cell-specific material that can promote the formation of a near-confluent endothelium. We additionally performed hemocompatibility assays using human whole blood and demonstrated that spider silk materials exhibit excellent hemocompatibility under both static and flow conditions. Furthermore, we showed that the material displayed slow enzyme-mediated degradation. Finally, we illustrated the ability to load and release the clinically relevant drug everolimus from recombinant spider silk coatings in a quantity and at a rate similar to that of commercial devices. These results support the use of REDV-functionalized recombinant spider silk as a coating for drug-eluting stents.

Passivation protein-adhesion platform promoting stent reendothelialization using two-electron-assisted oxidation of polyphenols

Superhydrophilic surfaces play an important role in nature. Inspired by this, scientists have designed various superhydrophilic materials that are widely used in the field of biomaterials, such as PEG molecular brushes and zwitterionic materials. However, superhydrophilic coatings with only anti-fouling properties do not satisfy the requirements for rapid reendothelialization of cardiovascular stent surfaces. Herein, a novel polyphenol superhydrophilic surface with passivated protein-adsorption properties was developed using two-electron oxidation of dopamine and polyphenols. This coating has a multiscale effects: 1) macroscopically: anti-fouling properties of superhydrophilic; 2) microscopically: protein adhesion properties of active groups (quinone-, amino-, hydroxyphenyl groups and aromatic ring). Polyphenols not only enhance the ability of coating to passivate protein-adsorption, but also make the coating have polyphenol-related biological functions. Therefore, the polyphenol and passivated protein-adsorption platform together maintain the stability of the scaffold microenvironment. This, in turn, provides favorable conditions for the growth of endothelial cells on the scaffold surface. In vivo implantation of the coated stents into the abdominal aorta resulted in uniform and dense endothelial cells covering the surface of the neointima. Moreover, new endothelial cells secreted large amounts of functional endothelial nitric oxide synthase like healthy endothelial cells. These results indicate that the polyphenol superhydrophilic coating potentially resists intra-stent restenosis and promotes surface reendothelialization. Hence, polyphenol superhydrophilic coatings with passivated protein-adsorption properties constructed by two-electron-assisted oxidation are a highly effective and versatile surface-modification strategy for implantable cardiovascular devices.

Tissue engineering applications of recombinant human collagen: a review of recent progress

With the rapid development of synthetic biology, recombinant human collagen has emerged as a cutting-edge biological material globally. Its innovative applications in the fields of material science and medicine have opened new horizons in biomedical research. Recombinant human collagen stands out as a highly promising biomaterial, playing a pivotal role in crucial areas such as wound healing, stroma regeneration, and orthopedics. However, realizing its full potential by efficiently delivering it for optimal therapeutic outcomes remains a formidable challenge. This review provides a comprehensive overview of the applications of recombinant human collagen in biomedical systems, focusing on resolving this crucial issue. Additionally, it encompasses the exploration of 3D printing technologies incorporating recombinant collagen to address some urgent clinical challenges in regenerative repair in the future. The primary aim of this review also is to spotlight the advancements in the realm of biomaterials utilizing recombinant collagen, with the intention of fostering additional innovation and making significant contributions to the enhancement of regenerative biomaterials, therapeutic methodologies, and overall patient outcomes.

Study on the Effect of Type III Recombinant Humanized Collagen on Human Vascular Endothelial Cells

The effect and mechanism of type III recombinant humanized collagen (hCOLIII) on human vascular endothelial EA.hy926 cells at the cellular and molecular levels were investigated. The impact of hCOLIII on the proliferation of EA.hy926 cells was detected by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazoliumbromid assay, the effect of hCOLIII on cell migration was investigated by scratch assay, the impact of hCOLIII on cell cycle and apoptosis was detected by flow cytometry, the ability of hCOLIII to induce angiogenesis of EA.hy926 cells was evaluated by angiogenesis assay, and the effect of hCOLIII on vascular endothelial growth factor (VEGF) expression was detected by real-time reverse transcription-polymerase chain reaction analysis. The hCOLIII at concentrations of 0.5, 0.25, and 0.125 mg/mL all showed specific effects on the proliferation and migration of human vascular endothelial cells. It could also affect the cell cycle, increase the proliferation index, and increase the expression level of VEGF in human vascular endothelial cells. In the meantime, hCOLIII at the concentration of 0.5 mg/mL also showed a promoting effect on vessel formation. hCOLIII can potentially promote the endothelization process of blood vessels, mainly by affecting the proliferation, migration, and vascular-like structure of human endothelial cells. At the same time, hCOLIII can promote the expression of VEGF. This collagen demonstrated its potential as a raw material for cardiovascular implants.

A strategy for mechanically integrating robust hydrogel-tissue hybrid to promote the anti-calcification and endothelialization of bioprosthetic heart valve

Bioprosthetic heart valve (BHV) replacement has been the predominant treatment for severe heart valve diseases over decades. Most clinically available BHVs are crosslinked by glutaraldehyde (GLUT), while the high toxicity of residual GLUT could initiate calcification, severe thrombosis, and delayed endothelialization. Here, we construed a mechanically integrating robust hydrogel-tissue hybrid to improve the performance of BHVs. In particular, recombinant humanized collagen type III (rhCOLIII), which was precisely customized with anti-coagulant and pro-endothelialization bioactivity, was first incorporated into the polyvinyl alcohol (PVA)-based hydrogel via hydrogen bond interactions. Then, tannic acid was introduced to enhance the mechanical performance of PVA-based hydrogel and interfacial bonding between the hydrogel layer and bio-derived tissue due to the strong affinity for a wide range of substrates. In vitro and in vivo experimental results confirmed that the GLUT-crosslinked BHVs modified by the robust PVA-based hydrogel embedded rhCOLIII and TA possessed long-term anti-coagulant, accelerated endothelialization, mild inflammatory response and anti-calcification properties. Therefore, our mechanically integrating robust hydrogel-tissue hybrid strategy showed the potential to enhance the service function and prolong the service life of the BHVs after implantation.

Recombinantly expressed rhFEB remodeled the skin defect of db/db mice

Fibronectin (FN) and collagen are vital components of the extracellular matrix (ECM). These proteins are essential for tissue formation and cell alignment during the wound healing stage. In particular, FN interacts with collagens to activate various intracellular signaling pathways to maintain ECM stability. A novel recombinant extra domain-B fibronectin (EDB-FN)-COL3A1 fusion protein (rhFEB) was designed to mimic the ECM to promote chronic and refractory skin ulcer wound healing. rhFEB significantly enhanced cell adhesion and migration, vascular ring formation, and the production of new collagen I (COL1A1) in vitro. rhFEB decreased M1 macrophages and further modulated the wound microenvironment, which was confirmed by the treatment of db/db mice with rhFEB. Accelerated wound healing was shown during the initial stages in rhFEB-treated db/db mice, as was enhanced follicle regeneration, re-epithelialization, collagen deposition, granulation, inflammation, and angiogenesis. The wound chronicity of diabetic foot ulcers (DFUs) remains the main challenge in current and future treatment. rhFEB may be a candidate molecule for regulating M1 macrophages during DFU healing. KEY POINTS: • A recombinant protein EDB-FN-collagen III (rhFEB) was highly expressed in Escherichia coli • rhFEB protein induces COL1A1 secretion in human skin fibroblasts • rhFEB protein accelerates diabetic wound healing.

A drug-free cardiovascular stent functionalized with tailored collagen supports in-situ healing of vascular tissues

Drug-eluting stent implantation suppresses the excessive proliferation of smooth muscle cells to reduce in-stent restenosis. However, the efficacy of drug-eluting stents remains limited due to delayed reendothelialization, impaired intimal remodeling, and potentially increased late restenosis. Here, we show that a drug-free coating formulation functionalized with tailored recombinant humanized type III collagen exerts one-produces-multi effects in response to injured tissue following stent implantation. We demonstrate that the one-produces-multi coating possesses anticoagulation, anti-inflammatory, and intimal hyperplasia suppression properties. We perform transcriptome analysis to indicate that the drug-free coating favors the endothelialization process and induces the conversion of smooth muscle cells to a contractile phenotype. We find that compared to drug-eluting stents, our drug-free stent reduces in-stent restenosis in rabbit and porcine models and improves vascular neointimal healing in a rabbit model. Collectively, the one-produces-multi drug-free system represents a promising strategy for the next-generation of stents.

Sodium alginate hydrogel integrated with type III collagen and mesenchymal stem cell to promote endometrium regeneration and fertility restoration

A thinner endometrium has been linked to implantation failure, and various therapeutic strategies have been attempted to improve endometrial regeneration, including the use of mesenchymal stem cells (MSCs). However, low survival and retention rates of transplanted stem cells are main obstacles to efficient stem cell therapy in thin endometrium. Collagen type III is a key component of the extracellular matrix, plays a crucial role in promoting cell proliferation and differentiation, and has been identified as the major collagen expressed at the implantation site. Herein, composite alginate hydrogel containing recombinant type III collagen (rCo III) and umbilical cord mesenchymal stem cells are developed. rCo III serves as favorable bioactive molecule, displaying that rCo III administration promotes MSCs proliferation, stemness maintenance and migration. Moreover, rCo III administration enhances cell viability and migration of mouse endometrial stromal cells (ESCs). In a mouse model of thin endometrium, the Alg-rCo III hydrogel loaded with MSCs (MSC/Alg-rCo III) significantly induces endometrial regeneration and fertility enhancement in vivo. Further studies demonstrate that the MSC/Alg-rCo III hydrogel promoted endometrial function recovery partly by regulating mesenchymal-epithelial transition of ESCs. Taken together, the combination of Alg-rCo III hydrogel and MSCs has shown promising results in promoting endometrium regeneration and fertility restoration, and may provide new therapeutic options for endometrial disease.

Injectable smart stimuli-responsive hydrogels: pioneering advancements in biomedical applications

Hydrogels have established their significance as prominent biomaterials within the realm of biomedical research. However, injectable hydrogels have garnered greater attention compared with their conventional counterparts due to their excellent minimally invasive nature and adaptive behavior post-injection. With the rapid advancement of emerging chemistry and deepened understanding of biological processes, contemporary injectable hydrogels have been endowed with an "intelligent" capacity to respond to various endogenous/exogenous stimuli (such as temperature, pH, light and magnetic field). This innovation has spearheaded revolutionary transformations across fields such as tissue engineering repair, controlled drug delivery, disease-responsive therapies, and beyond. In this review, we comprehensively expound upon the raw materials (including natural and synthetic materials) and injectable principles of these advanced hydrogels, concurrently providing a detailed discussion of the prevalent strategies for conferring stimulus responsiveness. Finally, we elucidate the latest applications of these injectable "smart" stimuli-responsive hydrogels in the biomedical domain, offering insights into their prospects.

Surface Engineering of Bioactive Coatings for Improved Stent Hemocompatibility: A Comprehensive Review

Cardiovascular diseases continue to be a major contributor to illness and death on a global scale, and the implementation of stents has given rise to a revolutionary transformation in the field of interventional cardiology. The thrombotic and restenosis complications associated with stent implantation pose ongoing challenges. In recent years, bioactive coatings have emerged as a promising strategy to enhance stent hemocompatibility and reduce thrombogenicity. This review article provides an overview of the surface engineering techniques employed to improve the hemocompatibility of stents and reduce thrombus formation. It explores the mechanisms underlying thrombosis and discusses the factors influencing platelet activation and fibrin formation on stent surfaces. Various bioactive coatings, including anticoagulant agents, antiplatelet agents, and surface modifications, are discussed in detail, highlighting their potential in reducing thrombogenicity. This article also highlights a multitude of surface modification techniques which can be harnessed to enhance stent hemocompatibility including plasma treatment, physical vapor deposition (PVD), chemical vapor deposition (CVD), and electrodeposition. These techniques offer precise control over surface properties such as roughness, charge, and composition. The ultimate goal is to reduce platelet adhesion, tailor wettability, or facilitate the controlled release of bioactive agents. Evaluation methods for assessing hemocompatibility and thrombogenicity are also reviewed, ranging from in vitro assays to animal models. Recent advances in the field, such as nanotechnology-based coatings and bioactive coatings with controlled drug release systems, are highlighted. Surface engineering of bioactive coatings holds great promise for enhancing the long-term outcomes of stent implantation by enhancing hemocompatibility and reducing thrombogenicity. Future research directions and potential clinical applications are discussed, underscoring the need for continued advancements in this field.

The influence of tag sequence on recombinant humanized collagen (rhCol) and the evaluation of rhCol on Schwann cell behaviors

Recombinant humanized collagen (rhCol) was an extracellular matrix (ECM)-inspired biomimetic biomaterial prepared by biosynthesis technology, which was considered non-allergenic and could possibly activate tissue regeneration. The influence of tag sequence on both structures and performances of rhCol type III (rhCol III) was investigated, and the effect of rhCol III on cell behaviors was evaluated and discussed using Schwann cells (SCs) as in vitro model that was critical in the repair process after peripheral nerve injury. The results demonstrated that the introduction of tag sequence would influence both advanced structures and properties of rhCol III, while rhCol III regulated SCs adhesion, spreading, migration and proliferation. Also, both nerve growth factor and brain-derived neurotrophic factor increased when exposed to rhCol III. As the downstream proteins of integrin-mediated cell adhesions, phosphorylation of focal adhesion kinase and expression of vinculin was up-regulated along with the promotion of SCs adhesion and migration. The current findings contributed to a better knowledge of the interactions between rhCol III and SCs, and further offered a theoretical and experimental foundation for the development of rhCol III-based medical devices and clinical management of peripheral nerve injury.

Postfunctionalization of biological valve leaflets with a polyphenol network and anticoagulant recombinant humanized type III collagen for improved anticoagulation and endothelialization

Almost all commercial bioprosthetic heart valves (BHVs) are crosslinked with glutaraldehyde (GLUT); however, issues such as immune responses, calcification, delayed endothelialization, and especially severe thrombosis threaten the service lifespan of BHVs. Surface modification is expected to impart GLUT-crosslinked BHVs with versatility to optimize service performance. Here, a postfunctionalization strategy was established for GLUT-crosslinked BHVs, which were firstly modified with metal-phenolic networks (MPNs) to shield the exposed calcification site, and then anticoagulant recombinant humanized type III collagen (rhCOLIII) was immobilized to endow them with long-term antithrombogenicity and enhanced endothelialization properties. The postfunctionalization coating exhibited promising mechanical properties and resistance to enzymatic degradation capability resembling that of GLUT-crosslinked porcine pericardium (GLUT-PP). With the introduction of meticulously tailored rhCOLIII, the anti-coagulation and re-endothelialization properties of TA/Fe-rhCOLIII were significantly improved. Furthermore, the mild inflammatory response and reduced calcification were evidenced in TA/Fe-rhCOLIII by subcutaneous implantation. In conclusion, the efficacy of the proposed strategy combining anti-inflammatory MPNs and multifunctional rhCOLIII to improve anticoagulation, reduce the inflammatory response, and ultimately achieve rapid reendothelialization was supported by both ex vivo and in vivo experiments. Altogether, the current findings may provide a simple strategy for enhancing the service function of BHVs after implantation and show great potential in clinical applications.

The Potential of Collagen Treatment for Comorbid Diseases

Collagen, the most abundant protein in our bodies, plays a crucial role in maintaining the structural integrity of various tissues and organs. Beyond its involvement in skin elasticity and joint health, emerging research suggests that collagen may significantly impact the treatment of complex diseases, particularly those associated with tissue damage and inflammation. The versatile functions of collagen, including skin regeneration, improving joint health, and increasing bone strength, make it potentially useful in treating different diseases. To the best of my knowledge, the strategy of using collagen to treat comorbid diseases has not been widely studied. This paper aims to explore the potential of collagen in treating comorbid diseases, including rheumatoid arthritis, osteoarthritis, osteoporosis, psoriatic arthritis, sarcopenia, gastroesophageal reflux, periodontitis, skin aging, and diabetes mellitus. Collagen-based therapies have shown promise in managing comorbidities due to their versatile properties. The multifaceted nature of collagen positions it as a promising candidate for treating complex diseases and addressing comorbid conditions. Its roles in wound healing, musculoskeletal disorders, cardiovascular health, and gastrointestinal conditions highlight the diverse therapeutic applications of collagen in the context of comorbidity management.

Human Adipose-Derived Mesenchymal Stem Cell-Secreted Extracellular Matrix Coating on a Woven Nanotextile Vascular Patch for Improved Endothelial Cell Response

Biomedical implants possessing the structural and functional characteristics of extracellular matrix (ECM) are pivotal for vascular applications. This study investigated the potential of recreating a natural ECM-like structural and functional environment on the surface of biodegradable polymeric nanotextiles for vascular implants. Human adipose-derived mesenchymal stem cells (MSCs) were grown on a suitably engineered polycaprolactone (PCL) nanofibrous textile and were allowed to modify its surface through the deposition of MSC-specific ECM. This surface-modified nanotextile showed mechanical characteristics and functionality appropriate for vascular patch material. The uniformity of ECM coating significantly improved the viability, proliferation, and migration of human endothelial cells compared to bare and xenogeneic collagen-coated PCL nanotextile patches. Thus, a polymeric nanotextile, which is surface modified using MSC-driven ECM, provided a rapid and improved endothelialization, thereby suggesting its potential for vascular patch applications.

An extracellular matrix-mimetic coating with dual bionics for cardiovascular stents

Anti-inflammation and anti-coagulation are the primary requirements for cardiovascular stents and also the widely accepted trajectory for multi-functional modification. In this work, we proposed an extracellular matrix (ECM)-mimetic coating for cardiovascular stents with the amplified functionalization of recombinant humanized collagen type III (rhCOL III), where the biomimetics were driven by structure mimicry and component/function mimicry. Briefly, the structure-mimic was constructed by the formation of a nanofiber (NF) structure via the polymerization of polysiloxane with a further introduction of amine groups as the nanofibrous layer. The fiber network could function as a three-dimensional reservoir to support the amplified immobilization of rhCoL III. The rhCOL III was tailored for anti-coagulant, anti-inflammatory and endothelialization promotion properties, which endows the ECM-mimetic coating with desired surface functionalities. Stent implantation in the abdominal aorta of rabbits was conducted to validate the in vivo re-endothelialization of the ECM-mimetic coating. The mild inflammatory responses, anti-thrombotic property, promotion of endothelialization and suppression of excessive neointimal hyperplasia confirmed that the ECM-mimetic coating provided a promising approach for the modification of vascular implants.

Effect and mechanism of signal peptide and maltose on recombinant type III collagen production in Pichia pastoris

Recombinant type III collagen plays an important role in cosmetics, wound healing, and tissue engineering. Thus, increasing its production is necessary. After an initial increase in output by modifying the signal peptide, we showed that adding 1% maltose directly to the medium increased the yield and reduced the degradation of recombinant type III collagen. We initially verified that Pichia pastoris GS115 can metabolize and utilize maltose. Interestingly, maltose metabolism-associated proteins in Pichia pastoris GS115 have not yet been identified. RNA sequencing and transmission electron microscopy were performed to clarify the specific mechanism of maltose influence. The results showed that maltose significantly improved the metabolism of methanol, thiamine, riboflavin, arginine, and proline. After adding maltose, the cell microstructures tended more toward the normal. Adding maltose also contributed to yeast homeostasis and methanol tolerance. Finally, adding maltose resulted in the downregulation of aspartic protease YPS1 and a decrease in yeast mortality, thereby slowing down recombinant type III collagen degradation. KEY POINTS: • Co-feeding of maltose improves recombinant type III collagen production. • Maltose incorporation enhances methanol metabolism and antioxidant capacity. • Maltose addition contributes to Pichia pastoris GS115 homeostasis.

Investigation of MAF for Finishing the Inner Wall of Super-Slim Cardiovascular Stents Tube

The internal wall of cardiovascular stent tubing produced by a drawing process has defects such as pits and bumps, making the surface rough and unusable. In this research, the challenge of finishing the inner wall of a super-slim cardiovascular stent tube was solved by magnetic abrasive finishing. Firstly, a spherical CBN magnetic abrasive was prepared by a new method, plasma molten metal powders bonding with hard abrasives; then, a magnetic abrasive finishing device was developed to remove the defect layer from the inner wall of ultrafine long cardiovascular stent tubing; finally, response surface tests were performed and parameters were optimized. The results show that the prepared spherical CBN magnetic abrasive has a perfect spherical appearance; the sharp cutting edges cover the surface layer of the iron matrix; the developed magnetic abrasive finishing device for a ultrafine long cardiovascular stent tube meets the processing requirements; the process parameters are optimized by the established regression model; and the inner wall roughness (Ra) of the nickel-titanium alloy cardiovascular stents tube is reduced from 0.356 μm to 0.083 μm, with an error of 4.3% from the predicted value. Magnetic abrasive finishing effectively removed the inner wall defect layer and reduced the roughness, and this solution provides a reference for polishing the inner wall of ultrafine long tubes.

Investigation of Spherical Al2O3 Magnetic Abrasive Prepared by Novel Method for Finishing of the Inner Surface of Cobalt-Chromium Alloy Cardiovascular Stents Tube

In this investigation, spherical Al₂O₃ magnetic abrasive particles (MAPs) were used to polish the inner surface of ultra-fine long cobalt-chromium alloy cardiovascular stent tubes. The magnetic abrasives were prepared by combining plasma molten metal powder and hard abrasives, and the magnetic abrasives prepared by this new method are characterized by high sphericity, narrow particle size distribution range, long life, and good economic value. Firstly, the spherical Al₂O₃ magnetic abrasives were prepared by the new method; secondly, the polishing machine for the inner surface of the ultra-fine long cardiovascular stent tubes was developed; finally, the influence laws of spindle speed, magnetic pole speed, MAP filling quantities, the magnetic pole gap on the surface roughness (Ra), and the removal thickness (RT) of tubes were investigated. The results showed that the prepared Al₂O₃ magnetic abrasives were spherical in shape, and their superficial layer was tightly bound with Al₂O₃ hard abrasives with sharp cutting; the use of spherical Al₂O₃ magnetic abrasives could achieve the polishing of the inner surface of ultra-fine cobalt-chromium alloy cardiovascular bracket tubes, and after processing, the inner surface roughness (Ra) of the tubes decreased from 0.337 µm to 0.09 µm and had an RT of 5.106 µm.

Development of three-dimensionally printed vascular stents of bioresorbable poly(l-lactide-co-caprolactone)

With the ripening of 3D printing technology and the discovery of a variety of printable materials, 3D-printed vascular stents provide new treatment options for patients with angiocardiopathy. Bioresorbable stent not only combines the advantages of metallic stent and drug-coated balloon, but also avoids the disadvantages of them. 3D printing is also an economical and efficient way to produce stents and makes it possible to construct complex structures. In this study, stents made from poly(l-lactic acid) (PLLA), poly(ε-caprolactone) (PCL) and poly(l-lactide-co-caprolactone) (PLCL) were manufactured by 3D printing and evaluated for radial strength, crystallinity and molecular weight. PLCL copolymerized by different proportions of lactic acid and caprolactone showed different mechanical and degradation properties. This demonstrated the potential of 3D printing as a low-cost and high throughput method for stent manufacturing. The PLLA and PLCL 95/5 stents had similar mechanical properties, whereas PLCL 85/15 and PCL stents both had relatively low radial strength. In general, PLCL 95/5 had a faster degradation rate than PLLA. These two materials were made into peripheral vascular bioresorbable scaffolds (BRS) and further studied by additional bench testing. PLCL 95/5 peripheral BRS had superior mechanical properties in terms of flexural/bending fatigue and compression resistance.

Silk fibroin/chitosan coating with tunable catalytic nitric oxide generation for surface functionalization of cardiovascular stents

Developing a functional coating for vascular stents with sustainable and tunable NO release remains challenging. In this work, we report a silk fibroin/chitosan-based biopolymer coating incorporating copper ions as a catalyst for NO generation and demonstrate its potential for the surface functionalization of cardiovascular stents. Based on the differences in silk fibroin and chitosan coordinating with copper ions, the loading, bonding, and release of copper ions could be precisely regulated over a wide range by controlling the ratio of silk fibroin and chitosan. This system shows good cytocompatibility for endothelial cells and tunable catalytic activity to decompose S-nitroso-N-acetyl-D-penicillamine (SNAP) for NO generation. Consequently, a functionalized coating with sustainable and tunable NO catalysis generation was developed on the metallic stent. Based on good biocompatibility, tunable NO release, and simple processing, the coating is expected to have great promise in the field of intervention therapy of cardiovascular disease.

Manipulate tumor hypoxia for improved photodynamic therapy using nanomaterials

Due to its low adverse effects, minimal invasiveness, and outstanding patient compliance, photodynamic therapy (PDT) has drawn a great deal of interest, which is achieved through incomplete reduction of O₂ by a photosensitizer under light illumination that produces amounts of reactive oxygen species (ROS). However, tumor hypoxia significantly hinders the therapeutic effect of PDT so that tumor cells cannot be eliminated, which results in tumor cells proliferating, invading, and metastasizing. Additionally, O₂ consumption during PDT exacerbates hypoxia in tumors, leading to several adverse events after PDT treatment. In recent years, various investigations have focused on conquering or using tumor hypoxia by nanomaterials to amplify PDT efficacy, which is summarized in this review. This comprehensive review's objective is to present novel viewpoints on the advancement of oxygenation nanomaterials in this promising field, which is motivated by hypoxia-associated anti-tumor therapy.

Advanced application of collagen-based biomaterials in tissue repair and restoration

In tissue engineering, bioactive materials play an important role, providing structural support, cell regulation and establishing a suitable microenvironment to promote tissue regeneration. As the main component of extracellular matrix, collagen is an important natural bioactive material and it has been widely used in scientific research and clinical applications. Collagen is available from a wide range of animal origin, it can be produced by synthesis or through recombinant protein production systems. The use of pure collagen has inherent disadvantages in terms of physico-chemical properties. For this reason, a processed collagen in different ways can better match the specific requirements as biomaterial for tissue repair. Here, collagen may be used in bone/cartilage regeneration, skin regeneration, cardiovascular repair and other fields, by following different processing methods, including cross-linked collagen, complex, structured collagen, mineralized collagen, carrier and other forms, promoting the development of tissue engineering. This review summarizes a wide range of applications of collagen-based biomaterials and their recent progress in several tissue regeneration fields. Furthermore, the application prospect of bioactive materials based on collagen was outlooked, aiming at inspiring more new progress and advancements in tissue engineering research.

Graphical Abstract

Development of Innovative Biomaterials and Devices for the Treatment of Cardiovascular Diseases

Cardiovascular diseases have become the leading cause of death worldwide. The increasing burden of cardiovascular diseases has become a major public health problem and how to carry out efficient and reliable treatment of cardiovascular diseases has become an urgent global problem to be solved. Recently, implantable biomaterials and devices, especially minimally invasive interventional ones, such as vascular stents, artificial heart valves, bioprosthetic cardiac occluders, artificial graft cardiac patches, atrial shunts, and injectable hydrogels against heart failure, have become the most effective means in the treatment of cardiovascular diseases. Herein, an overview of the challenges and research frontier of innovative biomaterials and devices for the treatment of cardiovascular diseases is provided, and their future development directions are discussed.

Development of Biodegradable Polymeric Stents for the Treatment of Cardiovascular Diseases

Cardiovascular disease has become the leading cause of death. A vascular stent is an effective means for the treatment of cardiovascular diseases. In recent years, biodegradable polymeric vascular stents have been widely investigated by researchers because of its degradability and clinical application potential for cardiovascular disease treatment. Compared to non-biodegradable stents, these stents are designed to degrade after vascular healing, leaving regenerated healthy arteries. This article reviews and summarizes the recent advanced methods for fabricating biodegradable polymeric stents, including injection molding, weaving, 3D printing, and laser cutting. Besides, the functional modification of biodegradable polymeric stents is also introduced, including visualization, anti-thrombus, endothelialization, and anti-inflammation. In the end, the challenges and future perspectives of biodegradable polymeric stents were discussed.

Preparation and Properties of Double-Crosslinked Hydroxyapatite Composite Hydrogels

Natural polymer hydrogels have good mechanical properties and biocompatibility. This study designed hydroxyapatite-enhanced photo-oxidized double-crosslinked hydrogels. Hyaluronic acid (HA) and gelatin (Gel) were modified with methacrylate anhydride. The catechin group was further introduced into the HA chain inspired by the adhesion chemistry of marine mussels. Hence, the double-crosslinked hydrogel (HG) was formed by the photo-crosslinking of double bonds and the oxidative-crosslinking of catechins. Moreover, hydroxyapatite was introduced into HG to form hydroxyapatite-enhanced hydrogels (HGH). The results indicate that, with an increase in crosslinking network density, the stiffness of hydrogels became higher; these hydrogels have more of a compact pore structure, their anti-degradation property is improved, and swelling property is reduced. The introduction of hydroxyapatite greatly improved the mechanical properties of hydrogels, but there is no change in the stability and crosslinking network structure of hydrogels. These inorganic phase-enhanced hydrogels were expected to be applied to tissue engineering scaffolds.

A comparative study on cross-linking of fibrillar gel prepared by tilapia collagen and hyaluronic acid with EDC/NHS and genipin

Chemical cross-linking is an important step to grant satisfying properties to collagen-based materials. However, there are few comparative studies on crossing-linking of collagen-based fibrillar gels which are preferred biomaterials for similar properties to native tissues with different cross-linking agents. In this study, a fibrillar gel was fabricated with tilapia collagen and hyaluronic acid, and cross-linking conditions with EDC/NHS and genipin were discussed. Genipin gave gels much higher equilibrium cross-linking degree than EDC/NHS. ATR-FTIR and XPS showed EDC/NHS offered short-range cross-linking formed by amino and carboxyl groups in fibrils, while genipin induced long-range cross-linking by nucleophilic reaction through attack of amino groups in fibrils on carbon atoms at C-3 as well as ester groups in genipin, besides improved hydrogen bonds. XRD and SEM revealed the structural integrity of gels was strengthened after cross-linking, whereas fibril bundles disaggregated into thin fibrils. Consequently, swelling capacity and anti-degraded property were enhanced significantly, while thermal stability weakened. The fibrillar gels had good biocompatibility, but interestingly the appearance and migration of L929 fibroblasts were influenced by cross-linking degree. These results demonstrated that aquatic collagen-based fibrillar gel cross-linked by genipin had greater potential in biomaterials than EDC/NHS, whereas the cross-linking degree should be controlled.

Extracellular Matrix Coatings on Cardiovascular Materials—A Review

Vascular transplantation is an effective and common treatment for cardiovascular disease (CVD). However, the low biocompatibility of implants is a major problem that hinders its clinical application. Surface modification of implants with extracellular matrix (ECM) coatings is an effective approach to improve the biocompatibility of cardiovascular materials. The complete ECM seems to have better biocompatibility, which may give cardiovascular biomaterials a more functional surface. The use of one or several ECM proteins to construct a surface allows customization of coating composition and structure, possibly resulting in some unique functions. ECM is a complex three-dimensional structure composed of a variety of functional biological macromolecules, and changes in the composition will directly affect the function of the coating. Therefore, understanding the chemical composition of the ECM and its interaction with cells is beneficial to provide new approaches for coating surface modification. This article reviews novel ECM coatings, including coatings composed of intact ECM and biomimetic coatings tailored from several ECM proteins, and introduces new advances in coating fabrication. These ECM coatings are effective in improving the biocompatibility of vascular grafts.

Fabrication of a Tailored, Hybrid Extracellular Matrix Composite

The extracellular matrix (ECM) is a network of connective fibers that supports cells living in their surroundings. Native ECM, generated by the secretory products of each tissue's resident cells, has a unique architecture with different protein composition depending on the tissue. Therefore, it is very difficult to artificially design in vivo architecture in tissue engineering. In this study, we fabricated a hybrid ECM scaffold from the basic structure of fibroblast-derived cellular ECMs by adding major ECM components of fibronectin (FN) and collagen (COL I) externally. It was confirmed that while maintaining the basic structure of the native ECM, major protein components can be regulated. Then, decellularization was performed to prepare hybrid ECM scaffolds with various protein compositions and we demonstrated that a liver-mimicking fibronectin (FN)-rich hybrid ECM promoted successful settling of H4IIE rat hepatoma cells. We believe that our method holds promise for the fabrication of scaffolds that provide a tailored cellular microenvironment for specific organs and serve as novel pathways for the replacement or regeneration of specific organ tissues. This article is protected by copyright. All rights reserved.

A nitric oxide-eluting and REDV peptide-conjugated coating promotes vascular healing

Drug-eluting stents (DESs) placement remarkably reduces the over-proliferation of smooth muscle cells (SMCs) and thus neointimal hyperplasia. However, the pharmacological agent also slows down the re-endothelization, delays injury vascular healing and increases the risk of in-stent restenosis (ISR). Here, inspired by mussel foot proteins (Mfps), a mimicking endothelium functional stent coating was efficiently fabricated by thiol-ene "click" reaction, consisting of catechol grafted chitosan (CS-C), zinc sulfate, and Arg-Glu-Asp-Val (REDV) peptide. The mimicking endothelium coating could continuously catalyze endogenous nitric oxide (NO) gas and maintain the bioactivity of REDV peptide. Compared with bare stents, the mimicking coatings significantly inhibited the acute thrombosis for the first 1-week, accelerated re-endothelization and decreased in-stent restenosis for 1- and 3-month after implantation. In addition, the synergistic effect of NO and REDV peptide also regulated inflammation response and promoted the expression of muscle fiber.

Applying Principles of Regenerative Medicine to Vascular Stent Development

Stents are a widely-used device to treat a variety of cardiovascular diseases. The purpose of this review is to explore the application of regenerative medicine principles into current and future stent designs. This review will cover regeneration-relevant approaches emerging in the current research landscape of stent technology. Regenerative stent technologies include surface engineering of stents with cell secretomes, cell-capture coatings, mimics of endothelial products, surface topography, endothelial growth factors or cell-adhesive peptides, as well as design of bioresorable materials for temporary stent support. These technologies are comparatively analyzed in terms of their regenerative effects, therapeutic effects and challenges faced; their benefits and risks are weighed up for suggestions about future stent developments. This review highlights two unique regenerative features of stent technologies: selective regeneration, which is to selectively grow endothelial cells on a stent but inhibit the proliferation and migration of smooth muscle cells, and stent-assisted regeneration of ischemic tissue injury.

Sirolimus Release from Biodegradable Polymers for Coronary Stent Application: A Review

Drug-eluting stents (DESs) are commonly used for the treatment of coronary artery disease. The evolution of the drug-eluting layer on the surface of the metal stent plays an important role in DES functionality. Here, the use of biodegradable polymers has emerged as an attractive strategy because it minimizes the occurrence of late thrombosis after stent implantation. Furthermore, understanding the drug-release behavior of DESs is also important for improving the safety and efficacy of stent treatments. Drug release from biodegradable polymers has attracted extensive research attention because biodegradable polymers with different properties show different drug-release behaviors. Molecular weight, composition, glass transition temperature, crystallinity, and the degradation rate are important properties affecting the behavior of polymers. Sirolimus is a conventional anti-proliferation drug and is the most widely used drug in DESs. Sirolimus-release behavior affects endothelialization and thrombosis formation after DES implantation. In this review, we focus on sirolimus release from biodegradable polymers, including synthetic and natural polymers widely used in the medical field. We hope this review will provide valuable up-to-date information on this subject and contribute to the further development of safe and efficient DESs.

Dissolving microneedle-encapsulated drug-loaded nanoparticles and recombinant humanized collagen type III for the treatment of chronic wound via anti-inflammation and enhanced cell proliferation and angiogenesis

Nowadays, diabetic chronic wounds impose a heavy burden on patients and the medical system. Persistent inflammation and poor tissue remodeling severely limit the healing of chronic wounds. For these issues, the first recombinant humanized collagen type III (rhCol III) and naproxen (Nap) loaded poly(lactic-co-glycolic acid) (PLGA) nanoparticle incorporated hyaluronic acid (HA) microneedle (MN) was fabricated for diabetic chronic wound therapy. As the tailored rhCol III was synthesized based on the Gly483-Pro512 segment, which contained the highly adhesive fragments (GER, GEK) in the human collagen type III sequence, it possessed strong cell adhesion. The mechanical strength of the prepared MN was enough to overcome the tissue barrier of necrosis/hyperkeratosis in a minimally invasive way after being applied in wounds. Subsequently, rhCol III and Nap@PLGA nanoparticles were rapidly released to the wound site within a few minutes. The prepared MN possessed favourable biocompatibility and could effectively facilitate the proliferation and migration of fibroblasts and endothelial cells. Furthermore, the regenerative efficacy of the MN was evaluated in vivo using the diabetic rat full-thickness skin wound model. These results illustrated that the prepared MN could accelerate wound closure by reducing the inflammatory response and enhancing angiogenesis or collagen deposition, indicating their significant application value in wound dressings for chronic wound repair.

Endothelialization strategy of implant materials surface: The newest research in recent 5 years

In recent years, more and more metal or non-metal materials have been used in the treatment of cardiovascular diseases, but the vascular complications after transplantation are still the main factors restricting the clinical application of most grafts, such as acute thrombosis and graft restenosis. Implant materials have been extensively designed and surface optimized by researchers, but it is still too difficult to avoid complications. Natural vascular endodermis has excellent function, anti-coagulant and anti-intimal hyperplasia, and it is also the key to maintaining the homeostasis of normal vascular microenvironment. Therefore, how to promote the adhesion of endothelial cells (ECs) on the surface of cardiovascular materials to achieve endothelialization of the surface is the key to overcoming the complications after implant materialization. At present, the surface endothelialization design of materials based on materials surface science, bioactive molecules, and biological function intervention and feedback has attracted much attention. In this review, we summarize the related research on the surface modification of materials by endothelialization in recent years, and analyze the advantages and challenges of current endothelialization design ideas, explain the relationship between materials, cells, and vascular remodeling in order to find a more ideal endothelialization surface modification strategy for future researchers to meet the requirements of clinical biocompatibility of cardiovascular materials.

Microenvironment-responsive multifunctional hydrogels with spatiotemporal sequential release of tailored recombinant human collagen type III for the rapid repair of infected chronic diabetic wounds

Recently, the incidence of chronic diabetic wounds increases continuously, and the existing clinical treatment is less effective. Thus, it is an urgent need to solve these problems for better clinical treatment effects. Herein, we prepared a brand-new tailored recombinant human collagen type III (rhCol III) and constructed a multifunctional microenvironment-responsive hydrogel carrier based on multifunctional antibacterial nanoparticles (PDA@Ag NPs) and our tailored rhCol III. The multifunctional smart hydrogel disintegrated quickly at the chronic diabetic wound sites and achieved the programed on-demand release of different therapeutic substances. The first released PDA@Ag NPs showed great antibacterial properties against S. aureus and E. coli. They could kill bacteria rapidly, and also showed antioxidant and anti-inflammatory effects at the wound site. The subsequent release of our tailored rhCol III could promote the proliferation and migration of mouse fibroblasts and endothelial cells during the proliferation and remodeling process of wound healing. Relevant results showed that the multifunctional smart hydrogel could promote the expression levels of basic fibroblast growth factor (bFGF) and vascular endothelial growth factor (VEGF), decrease the inflammatory response, accelerate the deposition of collagen and increase cell proliferation and angiogenesis, thereby speeding up the healing of infected chronic wounds. In a word, the hydrogel, which took into consideration the complex microenvironment at the wound site and multi-stage healing process, could achieve programmed and responsive release of different therapeutic substances to meet the treatment needs in different wound healing stages. More importantly, our work illustrated the great application potential of our brand-new rhCol III in promoting chronic wound repair and regeneration.

Porous Bilayer Vascular Grafts Fabricated from Electrospinning of the Recombinant Human Collagen (RHC) Peptide-Based Blend

Cardiovascular diseases, including coronary artery and peripheral vascular pathologies, are leading causes of mortality. As an alternative to autografts, prosthetic grafts have been developed to reduce the death rate. This study presents the development and characterization of bilayer vascular grafts with appropriate structural and biocompatibility properties. A polymer blend of recombinant human collagen (RHC) peptides and polycaprolactone (PCL) was used to build the inner layer of the graft by electrospinning and co-electrospinning the water-soluble polyethylene oxide (PEO) as sacrificial material together with PCL to generate the porous outer layer. The mechanical test demonstrated the bilayer scaffold’s appropriate mechanical properties as compared with the native vascular structure. Human umbilical vein endothelial cells (HUVEC) showed enhanced adhesion to the lumen after seeding on nanoscale fibers. Meanwhile, by enhancing the porosity of the microfibrous outer layer through the removal of PEO fibers, rat smooth muscle cells (A7r5) could proliferate and infiltrate the porous layer easily.