Comparative study of biosorption of heavy metals using different types of algae

Enhancing the biodiesel production in the green alga Chlorella vulgaris by heavy metal stress and prediction of fuel properties from fatty acid profiles

The green microalga Chlorella vulgaris was used as a test organism during this study for evaluation of the impact of different heavy metal stress, Mn2+, Co2+, and Zn2+, on enhancing the biodiesel production. The algal cultures were grown for 13 days under heavy metal stress after which were subjected to estimation of growth, some primary metabolites, lipid, and fatty acid profiles. The maximum lipid accumulation (283.30 mg/g CDW) was recorded in the algal culture treated with 3 µM cobalt nitrate. Application of 2 mM manganese chloride; 1, 2, and 3 μM cobalt nitrate; and 0.2, 0.4, and 0.6 mM zinc sulfate caused highly significant increases in the lipid contents amounting to 183.8, 191.4, 230.6, 283.3, 176.3, 226.0, and 212.1 mg/g CDW, respectively, in comparison to control (153.4 mg/g CDW). The maximum proportion of saturated fatty acids (SFA) (64.44%) was noted in the culture treated with 6 mM MnCl2 due to the existence of palmitic acid (C16:0), stearic acid (C18:0), and pentadecylic acid (C15:0) which are represented by 53.59%, 5.96%, and 1.37%, respectively, of the total FAs. Relative increase in energy compound (REEC) showed that 1, 2, and 3 µM Co2+ lead to the highest stimulation in lipid and carbohydrate contents to 0.207, 0.352, and 0.329 × 103%, respectively. Empirical formulas were used for the assessment of biodiesel fuel properties based on FAME composition. The estimated properties met the prescribed international standard criteria.

Toxicity, physiological response, and biosorption mechanism of Dunaliella salina to copper, lead, and cadmium

Background

Heavy metal pollution has become a global problem, which urgently needed to be solved owing to its severe threat to water ecosystems and human health. Thus, the exploration and development of a simple, cost-effective and environmental-friendly technique to remove metal elements from contaminated water is of great importance. Algae are a kind of photosynthetic autotroph and exhibit excellent bioadsorption capacities, making them suitable for wastewater treatment.

Methods

The effects of heavy metals (copper, lead and cadmium) on the growth, biomolecules accumulation, metabolic responses and antioxidant response of Dunaliella salina were investigated. Moreover, the Box-Behnken design (BBD) in response surface methodology (RSM) was used to optimize the biosorption capacity, and FT-IR was performed to explore the biosorption mechanism of D. salina on multiple heavy metals.

Results

The growth of D. salina cells was significantly inhibited and the contents of intracellular photosynthetic pigments, polysaccharides and proteins were obviously reduced under different concentrations of Cu2+, Pb2+ and Cd2+, and the EC50 values were 18.14 mg/L, 160.37 mg/L and 3.32 mg/L at 72 h, respectively. Besides, the activities of antioxidant enzyme SOD and CAT in D. salina first increased, and then descended with increasing concentration of three metal ions, while MDA contents elevated continuously. Moreover, D. salina exhibited an excellent removal efficacy on three heavy metals. BBD assay revealed that the maximal removal rates for Cu2+, Pb2+, and Cd2+ were 88.9%, 87.2% and 72.9%, respectively under optimal adsorption conditions of pH 5-6, temperature 20-30°C, and adsorption time 6 h. Both surface biosorption and intracellular bioaccumulation mechanisms are involved in metal ions removal of D. salina. FT-IR spectrum exhibited the main functional groups including carboxyl (-COOH), hydroxyl (-OH), amino (-NH2), phosphate (-P=O) and sulfate (-S=O) are closely associated with the biosorption or removal of heavy metalsions.

Discussion

Attributing to the brilliant biosorption capacity, Dunaliella salina may be developed to be an excellent adsorbent for heavy metals.

Treatment of industrial wastewaters by algae-bacterial consortium with Bio-H2 production: Recent updates, challenges and future prospects

Currently, scarcity/security of clean water and energy resources are the most serious problems worldwide. Industries use large volume of ground water and a variety of chemicals to manufacture the products and discharge large volume of wastewater into environment, which causes severe impacts on environment and public health. Fossil fuels are considered as major energy resources for electricity and transportation sectors, which release large amount of CO2 and micro/macro pollutants, leading to cause the global warming and public health hazards. Therefore, algae-bacterial consortium (A-BC) may be eco-friendly, cost-effective and sustainable alternative way to treat the industrial wastewaters (IWWs) with Bio-H2 production. A-BC has potential to reduce the global warming and eutrophication. It also protects environment and public health as it converts toxic IWWs into non or less toxic (biomass). It also reduces 94%, 90% and 50% input costs of nutrients, freshwater and energy, respectively during IWWs treatment and Bio-H2 production. Most importantly, it produce sustainable alternative (Bio-H2) to replace use of fossil fuels and fill the world's energy demand in eco-friendly manner. Thus, this review paper provides a detailed knowledge on industrial wastewaters, their pollutants and toxic effects on water/soil/plant/humans and animals. It also provides an overview on A-BC, IWWs treatment, Bio-H2 production, fermentation process and its enhancement methods. Further, various molecular and analytical techniques are also discussed to characterize the A-BC structure, interactions, metabolites and Bio-H2 yield. The significance of A-BC, recent update, challenges and future prospects are also discussed.

Recent advances and mechanisms of microbial bioremediation of nickel from wastewater

The global concern over emerging pollutants, characterized by their low concentrations and high toxicity, necessitates effective remediation strategies. Among these pollutants, pharmaceutical and personal care products, pesticides, surfactants, and persistent organic pollutants have gained significant attention. These contaminants are extensively distributed within aquatic ecosystems, posing threats to both human and aquatic physiological systems. Nickel, a valuable metal renowned for its corrosion-resistant properties, is widely utilized in various industrial processes, leading to the generation of nickel-containing waste streams, including batteries, catalysts, wastewater, and electrolyte bleed-off. Contamination of soil, water, or air by these waste materials can have adverse effects on the environment and human health. This review article focuses on the recent advancements in environmental and economic implications associated with the removal of nickel from diverse waste sources. Physicochemical technologies employed for treating different nickel-containing effluents and wastewater are discussed, alongside bioremediation techniques and the underlying mechanisms by which microorganisms facilitate nickel removal. The recovery of nickel from waste materials holds paramount importance not only from an economic standpoint but also to mitigate environmental impacts.

Phycoremediation of heavy metals and production of biofuel from generated algal biomass: a review

Due to human activity and natural processes, heavy metal contamination frequently affects the earth's water resources. The pollution can be categorized as resistant and persistent since it poses a significant risk to terrestrial and marine biological systems and human health. Because of this, several appeals and demands have been made worldwide to try and clean up these contaminants. Through bioremediation, algal cells are frequently employed to adsorb and eliminate heavy metals from the environment. Bioremediation is seen as a desirable strategy with few adverse effects and low cost. Activities and procedures for bioremediation involving algal cells depend on various environmental factors, including salinity, pH, temperature, the concentration of heavy metals, the amount of alga biomass, and food availability. Additionally, the effectiveness of removing heavy metals from the environment by assessing how environmental circumstances affect algal activities. The main issues discussed are (1) heavy metal pollution of water bodies, the role of algal cells in heavy metal removal, the methods by which algae cells take up and store heavy metals, and the process of turning the algae biomass produced into biofuel. (2) To overcome the environmental factors and improve heavy metals bioremediation, many strategies are applied, such as immobilizing the cells, consortium culture, and using dry mass rather than living cells. (3) The processes for converting produced algal biomass into biofuels like biodiesel and biomethanol. The present study discusses the life cycle assessment and the limitations of biofuel products from algae biomass.

Removal of organic and inorganic contaminants from the air, soil, and water by algae

Rapid increases in human populations and development has led to a significant exploitation of natural resources around the world. On the other hand, humans have come to terms with the consequences of their past mistakes and started to address current and future resource utilization challenges. Today's primary challenge is figuring out and implementing eco-friendly, inexpensive, and innovative solutions for conservation issues such as environmental pollution, carbon neutrality, and manufacturing effluent/wastewater treatment, along with xenobiotic contamination of the natural ecosystem. One of the most promising approaches to reduce the environmental contamination load is the utilization of algae for bioremediation. Owing to their significant biosorption capacity to deactivate hazardous chemicals, macro-/microalgae are among the primary microorganisms that can be utilized for phytoremediation as a safe method for curtailing environmental pollution. In recent years, the use of algae to overcome environmental problems has advanced technologically, such as through synthetic biology and high-throughput phenomics, which is increasing the likelihood of attaining sustainability. As the research progresses, there is a promise for a greener future and the preservation of healthy ecosystems by using algae. They might act as a valuable tool in creating new products.

Recent Advances in Microbial-Assisted Remediation of Cadmium-Contaminated Soil

Soil contamination with cadmium (Cd) is a severe concern for the developing world due to its non-biodegradability and significant potential to damage the ecosystem and associated services. Industries such as mining, manufacturing, building, etc., rapidly produce a substantial amount of Cd, posing environmental risks. Cd toxicity in crop plants decreases nutrient and water uptake and translocation, increases oxidative damage, interferes with plant metabolism and inhibits plant morphology and physiology. However, various conventional physicochemical approaches are available to remove Cd from the soil, including chemical reduction, immobilization, stabilization and electro-remediation. Nevertheless, these processes are costly and unfriendly to the environment because they require much energy, skilled labor and hazardous chemicals. In contrasting, contaminated soils can be restored by using bioremediation techniques, which use plants alone and in association with different beneficial microbes as cutting-edge approaches. This review covers the bioremediation of soils contaminated with Cd in various new ways. The bioremediation capability of bacteria and fungi alone and in combination with plants are studied and analyzed. Microbes, including bacteria, fungi and algae, are reported to have a high tolerance for metals, having a 98% bioremediation capability. The internal structure of microorganisms, their cell surface characteristics and the surrounding environmental circumstances are all discussed concerning how microbes detoxify metals. Moreover, issues affecting the effectiveness of bioremediation are explored, along with potential difficulties, solutions and prospects.

Integrating microalgae production into mine closure plans

Examples of successful mine closure and acceptable regional transitioning of mining areas are scarce. The recent changes to the environmental, social and governance (ESG) obligations of mining companies should help to ensure that water and land resources as well as post-mining employment opportunities are considered as a part of mine closure. Integrating microalgae production into mine closure plans is a potential opportunity for mining companies to improve many ESG outcomes. Mine sites with sufficient suitable land and water resources in high solar radiation geographies may be able to economically grow microalgae to capture atmospheric CO₂, re-purpose saline mine waters, treat acidic and near-neutral pH metalliferous waters as well as produce soil ameliorants (biofertiliser, biostimulants and/or biochar) to improve mine rehabilitation outcomes. Microalgae production facilities may also provide an alternative industry and employment opportunities to help transition regional mining towns that have become reliant on mining activities. The potential economic, environmental and social benefits of using mine-influenced water for microalgae production may offer an opportunity to successfully close and transition some mining landscapes.

Microalgae: A green eco-friendly agents for bioremediation of tannery wastewater with simultaneous production of value-added products

Tannery wastewater (TWW) has high BOD, COD, TS and variety of pollutants like chromium, formaldehydes, biocides, oils, chlorophenols, detergents and phthalates etc. Besides these pollutants, TWW also rich source of nutrients like nitrogen, phosphorus, carbon and sulphur etc. that can be utilized by microalgae during their growth. Direct disposal of TWW into the environment may lead severe environmental and health threats, therefore it needs to be treated adequately. Microalgae are considered as an efficient microorganisms (fast growing, adaptability and strain robustness, high surface to volume ratio, energy saving) for remediation of wastewaters with simultaneous biomass recovery and generation of value added products (VAPs) such as biofuels, biohydrogen, biopolymer, biofertilizer, pigments, bioethanol, bioactive compounds, nutraceutical etc. Most microalgae are photosynthetic and use CO₂ and light energy to synthesise carbohydrate and reduces the emission of greenhouse gasses. Microalgae are also reported to remove heavy metals and antibiotics from wastewaters by bioaccumulation, biodegradation and biosorption. Microalgal treatment can be an alternative of conventional processes with generation of VAPs. The use of biotechnology in wastewater remediation with simultaneous generation of VAPs is trending. The validation of economic viability and environmental sustainability, life cycle assessment studies and techno-economic analysis is undergoing. Thus, in this review, the characteristics of TWW and microalgae are summarized, which manifest microalgae as potential candidates for wastewater remediation with simultaneous production of VAPs. Further, the treatment mechanisms, various factors (physical, chemical, mechanical and biological etc.) affecting treatment efficiency as well as challenges associated with microalgal remediation are also discussed.

Phytoremediation of Wastewater Containing Lead and Manganese Ions Using Algae

Heavy metal pollution of water from industrial discharge is a major problem worldwide. Thus, the quality of the environment and human health are severely affected. Various conventional technologies have been applied for water treatment, but these can be expensive, especially for industrial water treatment, and may have limited treatment efficiencies. Phytoremediation is a method that is successfully applied to remove metal ions from wastewater. In addition to the high efficiency of the depollution treatment, this method has the advantages of a low cost of the operation and the existence of many plants that can be used. This article presents the results of using algae (Sargassum fusiforme and Enteromorpha prolifera) to treat water containing manganese and lead ions. It was observed that maximum efficiencies for wastewater treatment were obtained when was used the algae Enteromorpha prolifera for a 600 min contact time period. The highest wastewater treatment efficiency obtained using Sargassum fusiforme was 99.46%.

Dynamic removal of Pb(II) by live Dunaliella salina: a competitive uptake and isotherm model study

The main aim of this study is modeling of a continuous biosorption system for the removal of Pb(II) ions in the aqueous conditions using live Dunaliella salina microalgae. The live microalgae can grow in saline water and opens new opportunities in varying the amount and properties of biosorbent. The effects of five parameters, including pH, optical density of algae as a factor indicating the adsorbent dosage, injection time, contact time, and initial concentration of Pb(II), were optimized by means of response surface methodology (RSM) based on the central composite design (CCD). Dunaliella salina algae showed maximum Pb(II) biosorption with 96% efficiency. For the selective Pb(II) uptake in the presence of Cd(II) and Ni(II), binary and ternary systems of ions were chosen. The mutual effect of each heavy metal ion in all systems on the total uptake percentage was also examined. The ion selectivity was investigated in the presence of diverse heavy metal ions, and the Pb(II) uptake percentage was determined to be 80%. Both Langmuir and Freundlich isotherm models were suitable for describing multicomponent binary and ternary systems depending on the presence of competitive ions in the mixture. Main functional groups and surface properties of the Dunaliella salina were identified by Fourier transform infrared spectroscopy, scanning electron microscopy, and energy dispersive spectrometry. Hence, effective heavy metal ion uptake, simple design, and cost-effective cultivation confirmed live Dunaliella salina as suitable microalgae for purifying contaminated water in an economic and safe manner.

Green alga Chlamydomonas reinhardtii can effectively remove diclofenac from the water environment - A new perspective on biotransformation

The use of unicellular algae to remove xenobiotics (including drugs) from wastewaters is one of the rapidly developing areas of environmental protection. Numerous data indicate that for efficient phycoremediation three processes are important, i.e. biosorption, bioaccumulation, and biotransformation. Although biosorption and bioaccumulation do not raise any serious doubts, biotransformation is more problematic since its products can be potentially more toxic than the parent compounds posing a threat to organisms living in a given environment, including organisms that made this transformation. Thus, two questions need to be answered before the proper algae strain is chosen for phycoremediation, namely what metabolites are produced during biotransformation, and how resistant is the analyzed strain to a mixture of parent compound and metabolites that appear over the course of culture? In this work, we evaluated the remediation potential of the model green alga Chlamydomonas reinhardtii in relation to non-steroidal anti-inflammatory drugs (NSAIDs), as exemplified by diclofenac. To achieve this, we analysed the susceptibility of C. reinhardtii to diclofenac as well as its capability to biosorption, bioaccumulation, and biotransformation of the drug. We have found that even at a relatively high concentration of diclofenac the algae maintained their vitality and were able to remove (37.7%) DCF from the environment. A wide range of phase I and II metabolites of diclofenac (38 transformation products) was discovered, with many of them characteristic rather for animal and bacterial biochemical pathways than for plant metabolism. Due to such a large number of detected products, 18 of which were not previously reported, the proposed scheme of diclofenac transformation by C. reinhardtii not only significantly contributes to broadening the knowledge in this field, but also allows to suggest possible pathways of degradation of xenobiotics with a similar structure. It is worth pointing out that a decrease in the level of diclofenac in the media observed in this study cannot be fully explained by biotransformation (8.4%). The mass balance analysis indicates that other processes (total 22%), such as biosorption, a non-extractable residue formation, or complete decomposition in metabolic cycles can be involved in the diclofenac disappearance, and those findings open the prospects of further research.

Biosorption of Cadmium and Lead by Dry Biomass of Nostoc sp. MK-11: Kinetic and Isotherm Study

Cadmium (Cd) and lead (Pb) are global environmental pollutants. In this study, Nostoc sp. MK-11 was used as an environmentally safe, economical, and efficient biosorbent for the removal of Cd and Pb ions from synthetic aqueous solutions. Nostoc sp. MK-11 was identified on a morphological and molecular basis using light microscopic, 16S rRNA sequences and phylogenetic analysis. Batch experiments were performed to determine the most significant factors for the removal of Cd and Pb ions from the synthetic aqueous solutions using dry Nostoc sp. MK1 biomass. The results indicated that the maximum biosorption of Pb and Cd ions was found under the conditions of 1 g of dry Nostoc sp. MK-11 biomass, 100 mg/L of initial metal concentrations, and 60 min contact time at pH 4 and 5 for Pb and Cd, respectively. Dry Nostoc sp. MK-11 biomass samples before and after biosorption were characterized using FTIR and SEM. A kinetic study showed that a pseudo second order kinetic model was well fitted rather than the pseudo first order. Three isotherm models Freundlich, Langmuir, and Temkin were used to explain the biosorption isotherms of metal ions by Nostoc sp. MK-11 dry biomass. Langmuir isotherm, which explains the existence of monolayer adsorption, fitted well to the biosorption process. Considering the Langmuir isotherm model, the maximum biosorption capacity (q_max) of Nostoc sp. MK-11 dry biomass was calculated as 75.757 and 83.963 mg g^-1 for Cd and Pb, respectively, which showed agreement with the obtained experimental values. Desorption investigations were carried out to evaluate the reusability of the biomass and the recovery of the metal ions. It was found that the desorption of Cd and Pb was above 90%. The dry biomass of Nostoc sp. MK-11 was proven to be efficient and cost-effective for removing Cd and especially Pb metal ions from the aqueous solutions, and the process is eco-friendly, feasible, and reliable.

Effects of Lead and Zinc Exposure on Uptake and Exudation Levels, Chlorophyll-a, and Phycobiliproteins in Sarcodia suiae

The present study aimed to determine the changes in the biosorption, bioaccumulation, chlorophyll-a (chl-a), phycobiliproteins, and exudation in the red seaweed Sarcodia suiae exposed to lead and zinc. The seaweed was exposed to ambient lead and zinc environments for 5 days before being transferred to fresh seawater, and the changes in biodesorption, biodecumulation, chl-a, and phycobiliprotein levels in S. suiae were investigated. Lead and zinc biosorption and bioaccumulation in the seaweed increased with the increase in the lead and zinc concentrations and exposure times. Meanwhile, the biosorption and bioaccumulation of zinc in the seaweed following exposure to zinc were significantly higher (p < 0.05) than the biosorption and bioaccumulation of lead in the seaweed following exposure to lead with the same concentration at each exposure time. The chl-a, phycoerythrin (PE), phycocyanin (PC), and allophycocyanin (APC) contents in the seaweed significantly decreased with the increase in the lead and zinc concentrations and exposure times. The chl-a, PE, PC, and APC contents in S. suiae, which was exposed to 5 Pb2+ mg/L for 5 days, were significantly higher (p < 0.05) than those in the seaweed exposed to zinc at the same concentration and for the same exposure times. In the lead and zinc exudation tests, the highest biodesorption and biodecumulation were observed on the 1st day of exudation after the seaweed was transferred to fresh seawater. The residual percentages of the lead and zinc in the seaweed cells were 15.86% and 73.08% after 5 days of exudation, respectively. The biodesorption rate and biodecumulation rate of the seaweed exposed to lead were higher than those of the seaweed exposed to zinc. However, the effect of lead on chl-a and phycobiliproteins was greater than that of zinc. This might be the result of lead not being a necessary metal for these algae, whereas zinc is.

Unusual uranium biomineralization induced by green algae: Behavior investigation and mechanism probe

As a biosorbent, algae are frequently used for the biotreatment or bioremediation of water contaminated by heavy metal or radionuclides. However, it is unclear that whether or not the biomineralization of these metal or radionuclides can be induced by algae in the process of bioremediation and what the mechanism is. In this work, Ankistrodsemus sp. has been used to treat the uranium-contaminated water, and more than 98% of uranium in the solution can be removed by the alga, when the initial uranium concentration ranges from 10 to 80 mg/L. Especially, an unusual phenomenon of algae-induced uranium biomineralization has been found in the process of uranium bioremediation and its mineralization mechanism has been explored by multiple approaches. It is worth noticing that the biomineralization of uranium induced by Ankistrodsemus sp. is significantly affected by contact time and pH. Uranium is captured rapidly on the cell surface via complexation with the carboxylate radical, amino and amide groups of the microalgae cells, which provides nucleation sites for the precipitation of insoluble minerals. Uranium stimulates Ankistrodsemus sp. to metabolize potassium ions (K⁺), which may endow algae with the ability to biomineralize uranium into the rose-like compreignacite (K₂[(UO₂)₆O₄(OH)₆]•8H₂O). As the time increased, the amorphous gradually converted into compreignacite crystals and a large number of crystals would expand over both inside and outside the cells. To the best of our knowledge, this is the first investigated microalgae with a time-dependent uranium biomineralization ability and superior tolerance to uranium. This work validates that Ankistrodsemus sp. is a promising alga for the treatment of uranium-contaminated wastewater.

The role of biomass elemental composition and ion-exchange in metal sorption by algae

The use of macroalgae, microalgae and cyanobacteria for metal sorption has been widely reported. Still, there are no studies allowing a direct comparison of the performance of these biomasses, especially while evaluating metal competition. The simultaneous sorption of Co²⁺, Cu²⁺, Ni²⁺ and Zn²⁺ present in a multi-elemental solution by six macroalgae, two microalgae and three cyanobacteria was evaluated. Brown macroalgae were shown to be the most promising biosorbent, with Undaria pinnatifida having a total metal sorption capacity of 0.6 mmol g^-1. Overall, macroalgae performed better than microalgae, followed by cyanobacteria. Carboxyl groups were identified as being the main functional groups involved in metal sorption, and all biomass samples were found to be selective to Cu²⁺. This was linked not only to its higher complexation constant value with relevant functional groups when compared to the remaining metals, but also the Irving-Williams series. The release of K⁺ and Ca²⁺ to the aqueous solution during the metal sorption was followed. The obtained results suggest they are readily exchanged with metals in the solution, indicating the occurrence of an ion-exchange mechanism in metal sorption by most biomass. Red macroalgae are an exception to the reported trends, suggesting that their metal sorption mechanism may differ from the other biomass types.

Equilibrium, kinetics, and thermodynamics study on the biosorption of reactive levofloxacin antibiotic on Pithophora macroalgae in aqueous solution

Since untreated wastewater from hospitals and residential areas is being discharged directly into surface waterways, pharmaceutical contaminants have been shown to be higher in many countries. Therefore, the development of novel and effective techniques to extract antibiotic substances from wastewater is of utmost importance. The present work aims at the use of green Pithophora macroalgae to remove levofloxacin antibiotic from an aqueous solution through biosorption. Biosorption is an economical and eco-friendly method for treating wastewater. The macroalgae were dried, grounded, and used as biosorbent to remove the levofloxacin (LVX) antibiotics from the aqueous solution. The influence of operating conditions such as initial antibiotic concentration, biosorbent dosage, agitation speed, pH, and temperature was studied. The biosorbent was characterized by FTIR, SEM, and point zero charge. The experimental data were evaluated using Langmuir and Freundlich isotherms. The experimental data best fit the Freundlich isotherm model (R² = 0.969), while the kinetic model for the experiment follows the pseudo-second-order (R² = 0.998) with a maximum biosorption capacity of 17.8 mg/g. Maximized removal of LVX occurs at favorable conditions of 298 K temperature, 150 mg/L initial concentration of antibiotic, 0.5 g sorbent dose, and 6.5 pH. The calculated thermodynamic parameters reveal that the biosorption of LVX antibiotics occurs by an endothermic process. This study deduces that Pithophora macroalgae biomass proved to be an effective biosorbent for biosorption of LVX antibiotics and may be a novel alternative method for antibiotics removal from aqueous solutions.

Advancement in algal bioremediation for organic, inorganic, and emerging pollutants

Rapidly changing bioremediation prospects are key drive to develop sustainable options that can offer extra benefits rather than only environmental remediation. Algal remediating is gaining utmost attention due to its mesmerising sustainable features, removing odour and toxicity, co-remediating numerous common and emerging inorganic and organic pollutants from gaseous and aqueous environments, and yielding biomass for a range of valuable products refining. Moreover, it also improves carbon footprint via carbon-capturing offers a better option than any other non-algal process for several high CO₂-emitting industries. Bio-uptake, bioadsorption, photodegradation, and biodegradation are the main mechanisms to remediate a range of common and emerging pollutants by various algae species. Bioadsorption was a dominant remediation mechanism among others implicating surface properties of pollutants and algal cell walls. Photodegradable pollutants were photodegraded by microalgae by adsorbing photons on the surface and intracellularly via stepwise photodissociation and breakdown. Biodegradation involves the transportation of selective pollutants intracellularly, and enzymes help to convert them into simpler non-toxic forms. Robust models are from the green microalgae group and are dominated by Chlorella species. This article compiles the advancements in microalgae-assisted pollutants remediation and value-addition under sustainable biorefinery prospects. Moreover, filling the knowledge gaps, and recommendations for developing an effective platform for emerging pollutants remediation and realization of commercial-scale algal bioremediation.

Prospects of Biogenic Xanthan and Gellan in Removal of Heavy Metals from Contaminated Waters

Biosorption is considered an effective technique for the treatment of heavy-metal-bearing wastewaters. In recent years, various biogenic products, including native and functionalized biopolymers, have been successfully employed in technologies aiming for the environmentally sustainable immobilization and removal of heavy metals at contaminated sites, including two commercially available heteropolysaccharides-xanthan and gellan. As biodegradable and non-toxic fermentation products, xanthan and gellan have been successfully tested in various remediation techniques. Here, to highlight their prospects as green adsorbents for water decontamination, we have reviewed their biosynthesis machinery and chemical properties that are linked to their sorptive interactions, as well as their actual performance in the remediation of heavy metal contaminated waters. Their sorptive performance in native and modified forms is promising; thus, both xanthan and gellan are emerging as new green-based materials for the cost-effective and efficient remediation of heavy metal-contaminated waters.

3D printed cylindrical capsules as a Chlorella pyrenoidosa immobilization device for removal of lead ions contamination

Immobilization is considered as a promising strategy toward the practical applications of powdered adsorbent. Herein, three dimensional (3D) printing cylindrical capsules with cross-linked PVA hydrogels membrane in encapsulate Chlorella pyrenoidosa (Cp) were utilized for removal of lead ions. The chemical compositions, hydrogels performance and morphologies of the membranes were determined by Fourier transformed infrared spectroscopy (FTIR), cross-linking degree, swelling degree, membrane flux and scanning electron microscopy (SEM). It is found that PVA cross-linking structure is successfully synthesized on the surface of capsule body and cap due to the presence of PVA in the filament. The lead ions adsorption capacity related to initial concentration of 50 mg/L in 48 h is reached 75.61%, revealing a good removal ability. The self-floating 3D printed capsules device also shows an excellent recovering property. After 7 runs of adsorption experiment, the lead ions adsorption ratio remains 78.56%, which will bring a broad prospect in wastewater treatment, chemical slow release along with sample preparation and separation.

Using Bacillus thuringiensis HM-311@hydroxyapatite@biochar beads to remediate Pb and Cd contaminated farmland soil

Cadmium (Cd) and lead (Pb) have become serious soil contaminants in China. In this work, we immobilized B. thuringiensis HM-311 (a heavy metal resistant strain) using vinegar residue biochar and hydroxyapatite (HAP) to form BtHM-311@HAP@biochar calcium alginate beads. In aqueous solution, the beads respectively reduced 1000 mg/L Pb²⁺ to 14.59 mg/L and 200 mg/L Cd²⁺ to 5.40 mg/L within 20 h. Furthermore, the results of pot experiment showed that the BtHM-311@HAP@biochar beads reduced the bioavailability of Pb and Cd in soil. The accumulation of Pb²⁺ in rice decreased by 39.97% in shoots and 46.40% in roots, while that of Cd²⁺ decreased by 34.59 and 44.9%, respectively. Similarly, the accumulation of Pb²⁺ in corn decreased by 40.86% in shoots and 51.34% in roots, while that of Cd²⁺ decreased by 41.28 and 42.91%, respectively. The beads also increased the microbial community diversity in the rhizosphere soil. These findings indicate that BtHM-311@HAP@biochar beads may be applicable for the bioremediation of Cd- and Pb-contaminated farmland soil.

Adsorption of Heavy Metal Ions Copper, Cadmium and Nickel by Microcystis aeruginosa

To investigate the treatment effect of algae biosorbent on heavy metal wastewater, in this paper, the adsorption effect of M. aeruginosa powder on heavy metal ions copper, cadmium and nickel was investigated using the uniform experimental method, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and TG-DSC comprehensive thermal analysis. The experimental results showed that the initial concentration of copper ion solution was 25 mg/L, the temperature was 30 °C, the pH value was 8 and the adsorption time was 5 h, which was the best condition for the removal of copper ions by algae powder adsorption, and the removal rate was 83.24%. The initial concentration of cadmium ion solution was 5 mg/L, the temperature was 35 °C, the pH value was 8 and the adsorption time was 4 h, which was the best condition for the adsorption of cadmium ion by algae powder, and the removal rate was 92.00%. The initial nickel ion solution concentration of 15 mg/L, temperature of 35 °C, pH value of 7 and adsorption time of 1 h were the best conditions for the adsorption of nickel ions by algae powder, and the removal rate was 88.67%. The spatial structure of algae powder changed obviously before and after adsorbing heavy metals. The functional groups such as amino and phosphate groups on the cell wall of M. aeruginosa enhanced the adsorption effect of heavy metal ions copper, cadmium and nickel. Additionally, M. aeruginosa adsorption of heavy metal ions copper, cadmium, nickel is an exothermic process. The above experiments show that M. aeruginosa can be used as a biological adsorbent to remove heavy metals, which lays a theoretical foundation for the subsequent treatment of heavy metal pollution by algae.

Employing algal biomass for fabrication of biofuels subsequent to phytoremediation

An alga belongs to the multi-pertinent group which can add to a significant sector of environment. They show a prevailing gathering of microorganisms for bioremediation due to their significant capacity to inactivate toxic heavy metals. It can easily absorb or neutralize the toxicity of heavy metals from water and soil through phytoremediation. Biosorption is a promising innovation that focuses on novel, modest, and exceptionally successful materials to apply in phytoremediation technology. Furthermore, algal biomass can be used for biofuel generation after phytoremediation using thermochemical or biological transformation processes. The algal components get affected by heavy metals during phytoremediation, but with the help of different techniques, these are yield efficient. The extreme lipid and mineral substances of microalgae have been proven helpful for biofuel manufacturing and worth extra products. Biofuels produced are bio-oil, biodiesel, bioethanol, biogas, etc. The reuse capability of algae can be utilized toward ecological manageability and economic facility. In this review article, the reuse and recycling of algal biomass for biofuel production have been represented. This novel technique has numerous benefits and produces eco-friendly and economically beneficial products.

Arsenic Biosorption by the Macroalgae Chondracanthus chamissoi and Cladophora sp

The biosorption of arsenic (As) with macroalgae has aroused much interest as a clean and low-cost technology. To evaluate arsenic biosorption by Chondracanthus chamissoi and Cladophora sp., approximately 5 kg of algae was collected from Huanchaco’s beach and Sausacocha lake (Huamachuco), La Libertad. As biosorption was carried out in four column systems, with 2 g of algae pellets each, circulating As solutions of 0.25 and 1.25 ppm, respectively, at 300 mL/min cm2. As concentration was determined at 3 and 6 h of treatment by flame atomic absorption spectrophotometry. Data were analyzed using Student’s t-test with 95% confidence. At 6 h, Chondracanthus chamissoi presented an As biosorption of 95.76% in a 0.25 ppm mg/L solution and 85.33% in a 1.25 mg/L solution. Cladophora sp., at 6 h, presented an As biosorption of 95.76% in a 0.25 mg/L solution and 42.03% in a 1.25 mg/L solution. It was concluded that Chondracanthus chamissoi achieves higher percentages of biosorption than Cladophora sp. in solutions of 1.25 mg/L As (p < 0.05), and that there is no significant difference between the biosorption percentages of Chondracanthus chamissoi and Cladophora sp. in a 0.25 mg/L solution of As at 6 h of treatment (p > 0.05).

Enhanced establishment of Colophospermum mopane (Kirk ex Benth.) seedlings for phytoremediation of Cu-Ni mine tailings

This study was carried out to determine the effect of cow manure amendment and the method of planting on the growth, survival, and heavy metal accumulation of Colophospermum mopane seedling grown on Bamangwato Concessions Limited (BCL) mine tailings. Different planting strategies were employed where the mopane seedlings were planted with bare roots (devoid of potting soil) and without cow manure (T1, - CM - Soil); with the potting soil adhering to the roots but without cow manure (T2, - CM + Soil); with bare roots in the presence of cow manure (T3, + CM - Soil); and with potting soil intact together with cow manure (T4, + CM + Soil). Cow manure increased the pH of the mine tailings enhancing the survival and growth of the mopane seedlings. Seedlings grown under T1 conditions had a higher concentration of the heavy metals As, Cr, Cu, Mn, Ni, Pb, Zn, Sb, and Sr in their shoots compared to those grown under a T4 environment consisting of potting soil with cow manure. Cow manure decreased the availability of these heavy metals in mine tailings through the humic substance which adsorbed the heavy metal while the soil adhering to the roots diluted the concentration of heavy metals in the rhizosphere thus reducing the uptake and toxicity. Overall, the establishment of mopane seedlings in mine tailings could be enhanced by cow manure amendments and with soil adhering to its roots during transplanting.

Microbial Remediation: A Promising Tool for Reclamation of Contaminated Sites with Special Emphasis on Heavy Metal and Pesticide Pollution: A Review

Heavy metal and pesticide pollution have become an inevitable part of the modern industrialized environment that find their way into all ecosystems. Because of their persistent nature, recalcitrance, high toxicity and biological enrichment, metal and pesticide pollution has threatened the stability of the environment as well as the health of living beings. Due to the environmental persistence of heavy metals and pesticides, they get accumulated in the environs and consequently lead to food chain contamination. Therefore, remediation of heavy metals and pesticide contaminations needs to be addressed as a high priority. Various physico-chemical approaches have been employed for this purpose, but they have significant drawbacks such as high expenses, high labor, alteration in soil properties, disruption of native soil microflora and generation of toxic by-products. Researchers worldwide are focusing on bioremediation strategies to overcome this multifaceted problem, i.e., the removal, immobilization and detoxification of pesticides and heavy metals, in the most efficient and cost-effective ways. For a period of millions of evolutionary years, microorganisms have become resistant to intoxicants and have developed the capability to remediate heavy metal ions and pesticides, and as a result, they have helped in the restoration of the natural state of degraded environs with long term environmental benefits. Keeping in view the environmental and health concerns imposed by heavy metals and pesticides in our society, we aimed to present a generalized picture of the bioremediation capacity of microorganisms. We explore the use of bacteria, fungi, algae and genetically engineered microbes for the remediation of both metals and pesticides. This review summarizes the major detoxification pathways and bioremediation technologies; in addition to that, a brief account is given of molecular approaches such as systemic biology, gene editing and omics that have enhanced the bioremediation process and widened its microbiological techniques toward the remediation of heavy metals and pesticides.

Biosorption potential of brown algae, Sargassum polycystum, for the removal of toxic metals, cadmium and zinc

In this research work, the biosorption potential of brown algae, Sargassum polycystum, was investigated for the removal of toxic metals, cadmium (Cd) and zinc (Zn), under controlled environmental conditions. The biosorbent prepared from the S. polycystum was characterized by Brunauer-Emmett-Teller (BET), scanning electron microscope (SEM) and Fourier transform infrared spectroscopy (FTIR) techniques. The optimal conditions identified using Box-Behnken design (BBD) for Cd removal were pH: 4.65, biosorbent mass: 1.8 g/L and shaking speed: 76 rpm. For zinc, the optimum values were pH: 5.7, biosorbent mass: 1.2 g/L and shaking speed: 125 rpm, respectively. The equilibrium uptake of the metals, Cd and Zn, was evaluated by isotherm models. The Langmuir isotherm proved to be an excellent fit confirming single layer of sorption. The maximum Cd and Zn uptakes achieved were 105.26 mg/g and 116.2 mg/g respectively. The kinetics of Cd and Zn biosorption onto brown algae Sargassum polycystum, follows pseudo-second order. The thermodynamic parameters were determined, and the sorption process was found to be feasible. Desorption studies of Cd and Zn were performed, and the bio sorbent reproduced appreciable efficiency for five successive cycles of sorption-desorption process using HCl.

Do Red Seaweed Nanoparticles Enhance Bioremediation Capacity of Toxic Dyes from Aqueous Solution?

Based on their functional groups, the use of various seaweed forms in phytoremediation has recently gained significant eco-friendly importance. The objective of this study was to determine whether a novel, sustainable, and ecologically acceptable adsorbent could be employed to remove toxic textile dye (Ismate Violet 2R (IV2R)) from an aqueous solution. The low-cost adsorbent was prepared from the nanoparticles form of the native red seaweed species, Pterocladia capillacea. Before and after the adsorption procedure, comprehensive characterization experiments on the bio-adsorbent were carried out, including BET, SEM, FTIR, UV, and dynamic light scattering (DLS) examination. The adsorption performance of the prepared nano-Pterocladia capillacea was optimized by adjusting operating parameters such as the initial dye concentration of 60 mg L⁻¹, pH of 2, and contact time of 15 min, all of which were obtained by batch experiments in the lab. At the optimum conditions, the prepared adsorbent had maximum removal effectiveness of 87.2%. Most typical kinetics and isotherm models were used to test the experimental results. The equilibrium data fit well with the Langmuir isotherm model, with comparatively higher R² values and fewer standard errors, while the pseudo-second-order kinetic model fits better with a decent correlation coefficient. Thermodynamic parameters revealed that the sorption process on nano-alga was exothermic and spontaneous.

Microbial Interventions in Bioremediation of Heavy Metal Contaminants in Agroecosystem

Soil naturally comprises heavy metals but due to the rapid industrialization and anthropogenic events such as uncontrolled use of agrochemicals their concentration is heightened up to a large extent across the world. Heavy metals are non-biodegradable and persistent in nature thereby disrupting the environment and causing huge health threats to humans. Exploiting microorganisms for the removal of heavy metal is a promising approach to combat these adverse consequences. The microbial remediation is very crucial to prevent the leaching of heavy metal or mobilization into the ecosystem, as well as to make heavy metal extraction simpler. In this scenario, technological breakthroughs in microbes-based heavy metals have pushed bioremediation as a promising alternative to standard approaches. So, to counteract the deleterious effects of these toxic metals, some microorganisms have evolved different mechanisms of detoxification. This review aims to scrutinize the routes that are responsible for the heavy metal(loid)s contamination of agricultural land, provides a vital assessment of microorganism bioremediation capability. We have summarized various processes of heavy metal bioremediation, such as biosorption, bioleaching, biomineralization, biotransformation, and intracellular accumulation, as well as the use of genetically modified microbes and immobilized microbial cells for heavy metal removal.

Metals and metalloids concentrations in three genotypes of pelagic Sargassum from the Atlantic Ocean Basin-scale

Since 2011, the Caribbean Islands have witnessed unprecedented massive stranding of a pelagic brown algal Sargassum spp. inducing damages for coastal ecosystems and economy. By accumulating heavy metals, Sargassum can play a role in contaminant transportation from offshore to the coast. In 2019, three genotypes of Sargassum (S. fluitans III, S. natans I, and VIII) were sampled in seven stations along a 3400 km transect in the Atlantic Ocean. Concentrations of 15 heavy metal(loid)s elements were analyzed by Inductively Coupled Plasma Optical Emission Spectrometer (ICP-OES). Mean metal concentrations were ranked following descending order: As >Fe > Al > Mn > Cd > Zn > Ni > V > Cu > Cr > Hg. The metalloid As was the most abundant contaminant with a maximum value of 115 ppm, previously observed in the Caribbean area (80-150 ppm). At Atlantic Ocean Basin-scale, metallic element concentrations do not present spatial longitudinal gradients. Genotypes S. fluitans III and S. natans (I and VIII), present differents metal(loid)s contamination distinct patterns.

Seaweed’s Role in Energetic Transition—From Environmental Pollution Challenges to Enhanced Electrochemical Devices

Simple Summary

Earth is currently facing the effects of climate change in all environmental ecosystems; this, together with pollution, is the cause of species extinction and biodiversity loss. Thus, it is vital to take actions to mitigate and decrease the release of greenhouse gases to the atmosphere. The emergence of energetic transition from fossil fuels to greener energies is clearly defined in the United Nations 2030 agenda. Although this transition endorses the ambitious goal to supply greener energy for all developed societies, the increased demand for the minerals essential to develop cleaner energetic technologies has highlighted several economic and environmental issues. Currently, these minerals are mainly obtained by mining activities that generate high levels of soil and water pollution, coupled with the intensive use of water and hazardous gas release. On the other hand, the exponential increase of electronic waste derived from end-of-life electronic equipment is already raising environmental concerns due to heavy metal contamination as a result of their disposal. Thus, it is vital to develop sustainable and efficient strategies to mitigate energetic transition environmental footprints. This review highlights the use of seaweed biomass for toxic mineral bioremediation, recycling, and as an alternative material for greener energy-storage device development.

Abstract

Resulting from the growing human population and the long dependency on fossil-based energies, the planet is facing a critical rise in global temperature, which is affecting all ecosystem networks. With a growing consciousness this issue, the EU has defined several strategies towards environment sustainability, where biodiversity restoration and preservation, pollution reduction, circular economy, and energetic transition are paramount issues. To achieve the ambitious goal of becoming climate-neutral by 2050, it is vital to mitigate the environmental footprint of the energetic transition, namely heavy metal pollution resulting from mining and processing of raw materials and from electronic waste disposal. Additionally, it is vital to find alternative materials to enhance the efficiency of energy storage devices. This review addresses the environmental challenges associated with energetic transition, with particular emphasis on the emergence of new alternative materials for the development of cleaner energy technologies and on the environmental impacts of mitigation strategies. We compile the most recent advances on natural sources, particularly seaweed, with regard to their use in metal recycling, bioremediation, and as valuable biomass to produce biochar for electrochemical applications.

A comprehensive review on sources, analysis and toxicity of environmental pollutants and its removal methods from water environment

Natural and human anthropogenic activities increase the concentration of the toxic pollutant in the water environment; they could cause harmful effects even in their lower concentration. In humans, toxic pollutants damage the structural and functional properties of essential organs including the heart, liver, kidneys, reproductive systems and pancreas. To avoid the toxicity of the pollutant, they should be removed from the water environment. Since various conventional water/wastewater treatment technologies including precipitation, ion exchange, flocculation, filtration, electrodialysis and membrane separation are employed to reduce the concentration of the pollutant, they have various difficulties in implementation, efficiency and ecological perspective. Therefore, several researchers are now focusing on alternative and eco-friendly approach called biosorption to remove toxic contaminants from the water environment. The biosorption innovation is one of the acclaimed systems for water treatment. The noteworthy endeavours have been made throughout the years to grow profoundly particular and effective biosorbent materials that are more effective, abundantly available, and cost-effective. Biosorption is effectively executed by utilizing both living and dead biomasses of bacteria, fungi and algae. Moreover, agro-waste materials are also utilized as biosorbents due to their excellent surface properties, abundant availability and cost-effectiveness. A variety of physical and chemical treatments enhances the biosorption capabilities of biosorbents via modifying their surface properties. In this review, biosorption mechanism, influencing parameters and application of biosorbent materials towards the removal of toxic pollutants are discussed. The future research opportunities for sustainable wastewater treatment were also explained.

A systematic review on adsorptive removal of hexavalent chromium from aqueous solutions: Recent advances

The contamination of natural resources by hexavalent chromium (Cr(VI)) originating from natural and anthropogenic activities is a serious environmental concern. Although many articles on chromium remediation have been published, a comprehensive understanding of the mechanisms involved in remediation with different sorbents is not yet available. In this systematic review, the performance and applicability of several adsorptive materials for Cr(VI) removal from aqueous media are discussed, along with a detailed analysis of the mechanisms involved. Statistical analysis is applied to compare the efficacies of different adsorbents, while a similar approach is used to determine the effects of sorbent properties and experimental conditions on the adsorption capacity. A detailed analysis of the factors involved in fixed-bed column studies is also presented. A suitable desorption approach to the regeneration of the spent adsorbent and its adsorption performance in reuse is also examined. Among the different sorbents, nanoparticles and mineral-doped biochar were found to be the most effective sorbents, while the adsorption was higher at low pH (~4.0) than that at intermediate pH (6-8). Contrary to our expectation, adsorption was high for sorbents with low specific surface areas, suggesting that the adsorption of Cr(VI) is largely influenced by the chemical properties of the sorbents. The optimum adsorption in fixed-bed column systems is obtained at a lower Cr(VI) ion concentration, a lower influent flow rate, and a higher bed height. Since most of the studies reviewed herein were merely experimental and utilized ideal conditions with the presence of a single contaminant, i.e. Cr(VI) in water, further studies on adsorption dynamics with the presence of other interfering ions are suggested. This review is promising for the further development of Cr(VI) removal strategies and closes the research gaps pertaining to their challenges.

Engineered macroalgal and microalgal adsorbents: Synthesis routes and adsorptive performance on hazardous water contaminants

Colourants, micropollutants and heavy metals are regarded as the most notorious hazardous contaminants found in rivers, oceans and sewage treatment plants, with detrimental impacts on human health and environment. In recent development, algal biomass showed great potential for the synthesis of engineered algal adsorbents suitable for the adsorptive management of various pollutants. This review presents comprehensive investigations on the engineered synthesis routes focusing mainly on mechanical, thermochemical and activation processes to produce algal adsorbents. The adsorptive performances of engineered algal adsorbents are assessed in accordance with different categories of hazardous pollutants as well as in terms of their experimental and modelled adsorption capacities. Due to the unique physicochemical properties of macroalgae and microalgae in their adsorbent forms, the adsorption of hazardous pollutants was found to be highly effective, which involved different mechanisms such as physisorption, chemisorption, ion-exchange, complexation and others depending on the types of pollutants. Overall, both macroalgae and microalgae not only can be tailored into different forms of adsorbents based on the applications, their adsorption capacities are also far more superior compared to the conventional adsorbents.

Polysaccharide Stalks in Didymosphenia geminata Diatom: Real World Applications and Strategies to Combat Its Spread

Didymosphenia geminata is a species of freshwater diatom that is known as invasive and is propagating quickly around the world. While invasive species are generally considered a nuisance, this paper attempts to find useful applications for D. geminata in the biomedical field and wastewater remediation. Here, we highlight the polysaccharide-based stalks of D. geminata that enable versatile potential applications and uses as a biopolymer, in drug delivery and wound healing, and as biocompatible scaffolding in cell adhesion and proliferation. Furthermore, this review focuses on how the polysaccharide nature of stalks and their metal-adsorption capacity allows them to have excellent wastewater remediation potential. This work also aims to assess the economic impact of D. geminata, as an invasive species, on its immediate environment. Potential government measures and legislation are recommended to prevent the spread of D. geminata, emphasizing the importance of education and collaboration between stakeholders.

Potential of three local marine microalgae from Tunisian coasts for cadmium, lead and chromium removals

Metal elements are widely used in various industrial activities and are considered as common water source contaminants. Thus, the development of cost-effective, simple design and efficient processes for trace metal elements removal from contaminated water sources is of great interest. The effects of cadmium, lead and chromium on growth, biomolecules accumulation and metabolic responses of Amphora coffaeiformis, Navicula salinicola and Dunaliella salina isolated from Tunisian coasts were tested. The bioremediation capacities of the three microalgae strains and the mechanisms involved in ions metal removal were also investigated. N. salinicola and D. salina seem to be better tolerating to Cr, while A. coffaeiformis and N. salinicola showed high resistance to Pb. The expression profile analyses by qRT-PCR of the antioxidant defense-related genes revealed that Cd, Pb and Cr treatments induce the up-regulation of catalase and superoxide dismutase coding genes for A. coffaeiformis and D. salina. Regarding N. salinicola, the catalase coding gene seems to be overexpressed after Cd, Pb and Cr exposure while only Cd and Cr induce superoxide dismutase gene overexpression. Moreover, the phytochelatin synthase (a metal chelator synthesis-related gene) was up-regulated in N. salinicola, A. coffaeiformis and D. salina after Cr exposure and also in A. coffaeiformis and D. salina after Cd exposure. While Pb treatments induce overexpression of phytochelatin synthase coding gene only for D. salina. Studied strains showed promising metal removal efficiencies for both Pb and Cr ions metals reached 95% for D. salina. Ion metal removal mechanisms study revealed that intracellular bioaccumulation process is used by D. salina for Cr up-taking. However, both intracellular and extracellular removal mechanisms are involved for Pb and Cr removal using A. coffaeiformis, N. salinicola and for Pb removal using D. salina. FTIR analysis demonstrated that several functional groups as carboxyl, hydroxyl, amino, phosphate and sulfate may participate in the bioadsorption process.

Microalgal Systems for Wastewater Treatment: Technological Trends and Challenges towards Waste Recovery

Wastewater (WW) treatment using microalgae has become a growing trend due the economic and environmental benefits of the process. As microalgae need CO2, nitrogen, and phosphorus to grow, they remove these potential pollutants from wastewaters, making them able to replace energetically expensive treatment steps in conventional WW treatment. Unlike traditional sludge, biomass can be used to produce biofuels, biofertilizers, high value chemicals, and even next-generation growth media for “organically” grown microalgal biomass targeting zero-waste policies and contributing to a more sustainable circular bioeconomy. The main challenge in this technology is the techno-economic feasibility of the system. Alternatives such as the isolation of novel strains, the use of native consortia, and the design of new bioreactors have been studied to overcome this and aid the scale-up of microalgal systems. This review focuses on the treatment of urban, industrial, and agricultural wastewaters by microalgae and their ability to not only remove, but also promote the reuse, of those pollutants. Opportunities and future prospects are discussed, including the upgrading of the produced biomass into valuable compounds, mainly biofuels.

Sustainable mitigation of heavy metals from effluents: Toxicity and fate with recent technological advancements

Increase in anthropogenic activities due to rapid industrialization had caused an elevation in heavy metal contamination of aquatic and terrestrial ecosystems. These pollutants have detrimental effects on human and environmental health. The majority of these pollutants are carcinogenic, neurotoxic, and are very poisonous even at very low concentrations. Contamination caused by heavy metals has become a global concern for which the traditional treatment approaches lack in providing a cost-effective and eco-friendly solution. Therefore, the use of microorganisms and plants to reduce the free available heavy metal present in the environment has become the most acceptable method by researchers. Also, in microbial- and phyto-remediation the redox reaction shifts the valence which makes these metals less toxic. In addition to this, the use of biochar as a remediation tool has provided a sustainable solution that needs further investigations toward its implementation on a larger scale. Enzymes secreted by microbes and whole microbial cell are considered an eco-efficient biocatalyst for mitigation of heavy metals from contaminated sites. To the best of our knowledge there is very less literature available covering remediation of heavy metals aspect along with the sensors used for detection of heavy metals. Systematic management should be implemented to overcome the technical and practical limitations in the use of these bioremediation techniques. The knowledge gaps have been identified in terms of its limitation and possible future directions have been discussed.

Biosorption effect of Aspergillus niger and Penicillium chrysosporium for Cd- and Pb-contaminated soil and their physiological effects on Vicia faba L

Phytoremediation is an important solution to soil pollution management. The goal of this study is to determine the biosorption ability of the two selected fungi (Aspergillus niger and Penicillium chrysosporium) under heavy metal stress on faba bean plants. The fungal strains produced phytohormones, siderophore, ACC deaminase, and secondary metabolites. The biosorption capacity of A. niger and P. chrysosporium was 0.09 and 0.06 mg g^-1 and 0.5 and 0.4 mg g^-1 in media containing Cd and Pb, respectively. Fourier transform infrared spectroscopy of the fungal cell wall show primary functional groups like hydroxyl, amide, carboxyl, phosphoryl, sulfhydryl, and nitro. Therefore, A. niger and P. chrysosporium were inoculated to soils, and then the faba bean seeds were sown. After 21 days of sowing, the plants were irrigated with water to severe as control, with 100 mg L^-1 of Cd and 200 mg L^-1 of Pb. The results show that Cd and Pb caused a significant reduction in morphological characteristics, auxin, gibberellins, photosynthetic pigments, minerals content, and antioxidant enzymes as compared to control plants but caused a substantial boost in abscisic acid, ethylene, electrolyte leakage, lipid peroxidation, glutathione, proline, superoxide dismutase, secondary metabolites, and antioxidant capacity. In inoculated plants, metal-induced oxidative stress was modulated by inhibiting the transport of metal and decreased electrolyte leakage and lipid peroxidation. Finally, the inoculation of endophytic fungi contributed actively to the absorption of heavy metals and decreased their content in soil and plants. This could be utilized as an excellent technique in the fields of heavy metal-contaminated sustainable agriculture.

Selective incorporation of rare earth elements by seaweeds from Cape Mondego, western Portuguese coast

This study examined the mechanism of incorporation of the rare earth elements (REEs), La, Ce, Nd, Eu, Gd, Tb, Yb, into green (Codium tomentosum, Ulva rigida), red (Gracilaria gracilis, Osmundea pinnatifida, Porphyra sp), and brown seaweeds (Saccorhiza polyschides, Undaria pinnatifida) collected from a single site near the coastline of the Cape Mondego, western Portugal. The concentrations of REEs, Mg, Ca, Al, Fe, Zn, and Cu in the biomasses were determined by inductively-coupled plasma mass spectrometry (ICP-MS). The species showed differences in their incorporation and fractionation of REEs from the same environment: the sum of REEs was higher in U. rigida, C. tomentosum, G. gracilis, and O. pinnatifida (0.7-1.7 μg g^-1) than in Porphyra sp., S. polyschides, and U. pinnatifida (0.1-0.2 μg g^-1). Ratios of Ce/Yb ranged from 13 (in S. polyschides) to 103 (in U. rigida), indicating different proportions of light and heavy REEs among species. Good correlations were found between Al and Fe (R² = 0.98), and between these elements and La, Ce, Nd, Gd (R² = 0.88-0.97) and Yb (R² = 0.66-0.71) for all species except C. tomentosum and G. gracilis. Profiles of REE values normalised to average upper-continental crust composition indicated positive anomalies of Eu and Tb that reinforced the singularity of these elements in the REE group. Correlations between the REEs and Al or Fe suggest that detrital terrigenous particles, adhered to seaweed walls, may be an important mechanism for the incorporation of REEs by seaweeds. Different patterns for C. tomentosum and G. gracilis may also be indicative of the higher influence of cell wall composition on REE incorporation.

Removal of Toxic Heavy Metals from Contaminated Aqueous Solutions Using Seaweeds: A Review

Heavy metal contamination affects lives with concomitant environmental pollution, and seaweed has emerged as a remedy with the ability to save the ecosystem, due to its eco-friendliness, affordability, availability, and effective metal ion removal rate. Heavy metals are intrinsic toxicants that are known to induce damage to multiple organs, especially when subjected to excess exposure. With respect to these growing concerns, this review presents the preferred sorption material among the many natural sorption materials. The use of seaweeds to treat contaminated solutions has demonstrated outstanding results when compared to other materials. The sorption of metal ions using dead seaweed biomass offers a comparative advantage over other natural sorption materials. This article summarizes the impact of heavy metals on the environment, and why dead seaweed biomass is regarded as the leading remediation material among the available materials. This article also showcases the biosorption mechanism of dead seaweed biomass and its effectiveness as a useful, cheap, and affordable bioremediation material.

Uranium removal from complex mining waters by alginate beads doped with cells of Stenotrophomonas sp. Br8: Novel perspectives for metal bioremediation

Uranium-containing effluents generated by nuclear energy industry must be efficiently remediated before release to the environment. Currently, numerous microbial-based strategies are being developed for this purpose. In particular, the bacterial strain Stenotrophomonas sp. Br8, isolated from U mill tailings porewaters, has been already shown to efficiently precipitate U(VI) as stable U phosphates mediated by phosphatase activity. However, the upscaling of this strategy should overcome some constraints regarding cell exposure to harsh environmental conditions. In the present study, the immobilization of Br8 biomass in an inorganic matrix was optimized to provide protection to the cells as well as to make the process more convenient for real-scale utilization. The use of biocompatible, highly porous alginate beads for Br8 cells immobilization resulted the best alternative when investigating by a multidisciplinary approach (High-Angle Annular Dark-Field Scanning Transmission Electron Microscopy (HAADF-STEM), Environmental Scanning Electron Microscopy (ESEM), Fourier Transform Infrared Spectroscopy with Attenuated Total Reflectance, etc.) several consolidated entrapment methods. This biomaterial was applied to complex real U mining porewaters (containing 47 mg/L U) in presence of an organic phosphate source (glycerol-2-phosphate) to produce reactive free orthophosphates through Br8 phosphatase activity. Uranium immobilization rates around 98 % were observed after one cycle of 72 h. In terms of U removal ability as a function of biomass, Br8-doped alginate beads were determined to remove up to 1199.5 mg U/g dry biomass over two treatment cycles. Additionally, optimized conditions for storing Br8-doped beads and for a correct application were assessed. Results for U accumulation kinetics and HAADF-STEM/ESEM analyses revealed that U removal by the immobilized cells is a biphasic process combining a first passive U sorption onto bead and/or cell surfaces and a second slow active biomineralization. This work provides new practical insights into the biological and physico-chemical parameters governing a high-efficient U bioremediation process based on the phosphatase activity of immobilized bacterial cells when applied to complex mining waters under laboratory conditions.

Ulva lactuca: A bioindicator for anthropogenic contamination and its environmental remediation capacity

Coastal regions are subjected to degradation due to anthropogenic pollution. Effluents loaded with variable concentrations of heavy metal, persistent organic pollutant, as well as nutrients are discharged in coastal areas leading to environmental degradation. In the past years, many scientists have studied, not only the effect of different contaminants on coastal ecosystems but also, they have searched for organisms tolerant to pollutants that can be used as bioindicators or for biomonitoring purposes. Furthermore, many researchers have demonstrated the capacity of different marine organisms to remove heavy metals and persistent organic pollutants, as well as to reduce nutrient concentration, which may lead to eutrophication. In this sense, Ulva lactuca, a green macroalgae commonly found in coastal areas, has been extensively studied for its capacity to accumulate pollutants; as a bioindicator; as well as for its remediation capacity. This paper aims to review the information published regarding the use of Ulva lactuca in environmental applications. The review was focused on those studies that analyse the role of this macroalga as a biomonitor or in bioremediation experiments.

Advancement of green technologies: A comprehensive review on the potential application of microalgae biomass

Microalgae have drawn significant interest worldwide, owing to their enormous application potential in the green energy, biopharmaceutical, and nutraceutical industries. Many studies have proved and stated the potential of microalgae in the area of biofuel which is economically effective and environmentally friendly. Besides the commercial value, the potential of microalgae in environmental protection has also been investigated. Microalgae-based process is one of the most effective way to treat heavy metal pollution, compared to conventional methods, it does not release any toxic waste or harmful gases, and the aquatic organism will not receive any harmful effects. The potential dual role of microalge in phytoremedation and energy production has made it widely explored for its capability. The interest of microalgae in various application has motivated a new focus in green technologies. Considering the rapid population growth with the continuous increase on the global demand and the application of biomass in diverse field, significant upgrades have been performed to accommodate green technological advancement. In the past decade, noteworthy advancement has been made on the technology involving the diverse application of microalgae biomass. This review aims to explore on the application of microalgae and the development of green technology in various application for microalgae biomass. There is great prospects for researchers in this field to delve into other potential utilization of microalgae biomass not only for bioremediation process but also to generate revenues from microalgae by incorporating clean and green technology for long-term sustainability and environmental benefits.

Removal of Heavy Metals (Cd2+, Cu2+, Ni2+, Pb2+) from Aqueous Solution Using Hizikia fusiformis as an Algae-Based Bioadsorbent

This study investigated the applicability of algae (Hizikia fusiformis, Green gracilaria, and Codium fragile) for removing heavy metals (Cd2+, Cu2+, Ni2+, and Pb2+) from aqueous solutions. Among the algae, H. fusiformis was chosen as a bioadsorbent and modified with NaOH and HCl. The results showed that the biosorption capacity of H. fusiformis improved significantly after treatment with NaOH; however, H. fusiformis modified with HCl did not achieve the expected value. The NaOH treatment enhanced the biosorption of metals on the treated H. fusiformis because of the hydrolysis reaction producing carboxylic (–COOH) and hydroxyl groups (–OH). The kinetics for Cd2+, Cu2+, Ni2+, and Pb2+ biosorption well fitted to pseudo-first-order, pseudo-second-order, and Elovich models, with R2 of >0.994. The Freundlich model provided a good fit for the equilibrium biosorption of Cd2+, Cu2+, and Ni2+ by both algae and the Langmuir model for Pb2+. The maximum biosorption of metals was in the order Pb2+ >> Cu2+ ≈ Ni2+ > Cd2+, with qmax of 167.73, 45.09, 44.38, and 42.08 mg/g, respectively. With an increase in the solution pH, metal biosorption was enhanced, and considerable enhancement was observed in the pH range of 2–4. Thus, H. fusiformis is expected to be considered a superior candidate for metal biosorption.

Biosorption of heavy metal ions by green alga Neochloris oleoabundans: Effects of metal ion properties and cell wall structure

Effects of metal ion proprieties and the cell wall structure of green alga Neochloris oleoabundans were investigated on five strategically selected heavy metal ions, Pb(II), Hg(II), Zn(II), Cd(II) and Cu(II). The biosorption of these ions were energy-independent and spontaneous Langmuir adsorption. The adsorption capacities of Pb(II), Hg(II), Zn(II), Cd(II) and Cu(II) were determined to be 1.03, 0.91, 1.20, 0.65 and 1.23 mmol/g, respectively. Data suggest that peptide-containing molecules and non-cellulosic polysaccharides on cell wall were the primary sites of adsorption. Ion Pb(II) showed the strongest inhibitive effects on the adsorption of other metal ions on cells in binaries, corresponding to its large affinity to the biosorbents, which was next only to that of Cu(II). A linear relation was established for the first time between the adsorption capacity and the impact factor, which is defined in this paper as the electronegativity of a metal ion normalized by its atomic radius. In other words, adsorption capacity of N. oleoabundans biomass to the tested two-valence metal ions is proportional to the electronegativity and inversely proportional to the radius of the metal ions. Cell aggregation was caused by the addition of Cu(II), which exhibited distinctive adsorption behaviors than other metal ions.

Restoration of heavy metal-contaminated soil and water through biosorbents: A review of current understanding and future challenges

Heavy metal pollution in soil and water is a potential threat to human health as it renders food quality substandard. Different biosorbents such as microbial and agricultural biomass have been exploited for heavy metal immobilization in soil and sorptive removal in waters. Biosorption is an effective and sustainable method for heavy metal removal in soil and water, but the inherent challenges are to find cheap, selective, robust, and cost-effective bioadsorbents. Microbial and agricultural biomass and their modified forms such as nanocomposites and carbonaceous materials (viz., biochar, nanobiochar, biocarbon), might be useful for sequestration of heavy metals in soil via adsorption, ion exchange, complexation, precipitation, and enzymatic transformation mechanisms. In this review, potential biosorbents and their metal removal capacity in soil and water are discussed. The microbial adsorbents and modified composites of agricultural biomasses show improved performance, stability, reusability, and effectively immobilize heavy metals from soil and water. In the future, researchers may consider the modified composites, encapsulated biosorbents for soil and water remediation.

Towards a Circular Economy: Analysis of the Use of Biowaste as Biosorbent for the Removal of Heavy Metals

Industrial human activity has led to the release of substantial amounts of heavy metals into the environment. Contamination of water with heavy metals such as lead, cadmium, copper, zinc, chromium, or nickel represents a serious problem. As part of the circular economy, it is appropriate to use biowaste from agriculture, fisheries, and the timber industry as biosorbents. In this literature review, the potential of using these biowaste groups as biosorbents for metal removal is presented. This biowaste is characterized by the presence of carboxyl, hydroxyl, carbonyl, amide, amine, sulfydryl, and other groups on their surface, which form complexes and chelates with metals present in water. Biosorption seems to be a potential alternative to conventional technologies for removing or recovering heavy metals from water or wastewater, which are uneconomical and generate additional waste. The paper demonstrates that harnessing the potential of biowaste to remove metals is beneficial to the environment as they can solve the problem of incineration and realise recycling that meets the circular economy. Although the choice of a suitable biosorbent for the removal of a particular metal involves a lot of research, the high biosorption efficiency, low cost, and renewability justify their use.

Optimization of chromium(VI) removal by indigenous microalga (Chlamydomonas sp.)-based biosorbent using response surface methodology

Phycoremediation of heavy metals has garnered considerable recent research interest. In this study, an indigenous microalga (Chlamydomonas sp.)-based biosorbent was employed for biosorption of Cr(VI) dissolved solids (Cr(VI)-DS), optimized using response surface methodology (RSM). The effects of microalga concentration, pH, and contact time were studied with 250 mg Cr(VI)-DS L^-1 . The biosorption of Cr(VI)-DS was higher at acidic pH (94.17% at pH 4) than at alkaline conditions (68.53% at pH 10). The interaction of pH and microalga concentration exerted significant (p < 0.05) influence on the biosorption. Under the optimized parameters of 1.5 g microalga L^-1 , pH 4, and contact time of 30 min, a predicted biosorption of 91.31% and biosorption capacity of 152 mg Cr(VI)-DS g^-1 biomass were documented. FTIR analysis attested the electronegative surface functional groups of the microalgae biomass, bracketed together with its high biosorption potency. The study evinced the potential of the indigenous microalga for remediation of hexavalent chromium. PRACTITIONER POINTS: Indigenous Ethiopian microalga (Chlamydomonas sp.) exhibited 94% Cr(VI) abatement with biosorption capacity of 152 mg Cr(VI) g^-1 . FTIR analysis of the biosorbent divulged the presence of electronegative functional groups (amino, carboxyl, hydroxyl, and carbonyl groups). Higher biosorption of Cr(VI)-DS under acidic pH (94.17% at pH 4) than alkaline pH (68.53% at pH 10). Significant (p < 0.05) interaction effect of pH and biomass concentration on the biosorption, evinced in RSM optimization 91% Cr(VI) removal achieved under optimal conditions of 1.5 g biosorbent L^-1 , 30 min of contact time, and pH 4.