Biosynthesis, structural architecture and biotechnological potential of bacterial tannase: a molecular advancement

Microbial tannases: biosynthesis, purification, characterization and potential industrial applications

Tannases are a family of esterases that catalyze the hydrolysis of ester and depside bonds present in hydrolyzable tannins to release glucose and gallic acid. This enzyme is widely spread in animals, plants, and microbes. In particular, fungi and bacteria are the major sources of tannase. In recent years, this enzyme has drawn the attention of investigators owing to its widespread emerging applications in different food, beverage, animal feed, pharmaceutical, and tannery effluent degradation processes. During the last decade, over-expression of the tannase gene and structural activity has gained momentum. This research focused on microbial tannases, which have sparked interest due to their various properties. The current study investigates the sources of tannase-producing microorganisms, the mechanisms of tannin metabolism, and the microbe's degradation of natural tannins. Furthermore, researchers proposed tannase's biochemical properties, cloning, expression, and structural construction. This review will help better understand microbial tannases for several important industrial and environmental applications.

Plant Tannase: Evolutionary and Functional Divergence Features

In plants, α/β-hydrolase regulates the hydrolysis of ester compounds, enriching the types and functions of specialized metabolites. In this study, three genes─CsCSE, CsCXE3, and CsTA─which encode caffeoyl shikimate esterase (CSE), carboxylesterase (CXE), and tannase (TA), respectively, were isolated from the tea plant genome through multiomics correlation analysis. Evolutionary analysis showed that CSE and CXE were ancient, whereas TA emerged in core eudicots approximately 120 million years ago. Enzyme activity assays revealed that CsCSE and CsCXE3 catalyze phenolic acid and acetate ester hydrolysis, respectively. Interestingly, CsTA not only has the catalytic function of CsCSE and CsCXE3 but also catalyzes the hydrolysis of galloylated catechin, hydrolyzable tannin, and hormone ester. Overall, CsTA is a newly derived α/β-hydrolase with evolutionary and functional divergence features. This study expands our understanding of the physiological significance of plant TA and provides insights into the potential role of CsTA in the complex metabolic processes of tea plants.

Evolution of computational techniques against various KRAS mutants in search for therapeutic drugs: a review article

KRAS was (Kirsten rat sarcoma viral oncogene homolog) revealed as an important target in current therapeutic cancer research because alteration of RAS (rat sarcoma viral oncogene homolog) protein has a critical role in malignant modification, tumor angiogenesis, and metastasis. For cancer treatment, designing competitive inhibitors for this attractive target was difficult. Nevertheless, computational investigations of the protein's dynamic behavior displayed the existence of temporary pockets that could be used to design allosteric inhibitors. The last decade witnessed intensive efforts to discover KRAS inhibitors. In 2021, the first KRAS G12C covalent inhibitor, AMG 510, received FDA (Food and drug administration) approval as an anticancer medication that paved the path for future treatment strategies against this target. Computer-aided drug designing discovery has long been used in drug development research targeting different KRAS mutants. In this review, the major breakthroughs in computational methods adapted to discover novel compounds for different mutations have been discussed. Undoubtedly, virtual screening and molecular dynamic (MD) simulation and molecular docking are the most considered approach, producing hits that can be employed in subsequent refinements. After comprehensive analysis, Afatinib and Quercetin were computationally identified as hits in different publications. Several authors conducted covalent docking studies with acryl amide warheads groups containing inhibitors. Future studies are needed to demonstrate their true potential. In-depth studies focusing on various allosteric pockets demonstrate that the switch I/II pocket is a suitable site for drug designing. In addition, machine learning and deep learning based approaches provide new insights for developing anti-KRAS drugs. We believe that this review provides extensive information to researchers globally and encourages further development in this particular area of research.

Study on the Effects of Tannase on the De Astringency of Pomegranate Juice

Reducing the punicalagin content is an effective strategy for eliminating the astringency of pomegranate juice. In this study, pomegranate juice was used as the raw material, and tannase was applied to convert punicalagin into ellagic acid and gallic acid. The effects of tannase concentration, reaction time, and temperature on juice deastringency were evaluated, along with the antioxidant and physicochemical properties of the treated juice. The results demonstrated that, under optimal conditions (33.9 U/100 mL tannase, 30 °C, 90 min reaction time), the punicalagin content decreased by 27.8%, while the ellagic acid and gallic acid levels increased by 24.2% and 32.3%, respectively, effectively reducing the juice's astringency. Under these conditions, the total phenolic content reached 110 mg/100 g, with a free radical scavenging capacity of 69.8%, significantly enhancing the juice's antioxidant properties. These results suggest that tannase treatment of pomegranate juice enhances the polyphenol content, thereby improving its health benefits without compromising the product quality.

Cloning, purification and characterization of a novel thermostable recombinant tannase from Galactobacillus timonensis

The exorbitant production costs associated with natural tannases pose a significant challenge to their widespread industrial utilization. Microbial expression systems provide a cost-effective method for enzyme production. In this study, a putative gene encoding the subtype B tannase (Gt-Tan) was cloned from Galactobacillus timonensis and expressed heterologously in Escherichia coli BL21 (DE3) cells. The Gt-Tan was purified using metal affinity chromatography and exhibited a monomeric structure with a molecular weight of 55 kDa. Gt-Tan showed optimal activity at a temperature of 50 ℃ and a pH of 6.0. It was also quite thermostable, with approximately 68.3 % and 54.7 % of its maximal activity retained after incubation at 45 ℃ for 2 h and 40 ℃ for 48 h respectively. Addition of Mn2+, Zn2+, Al3+, urea, n-butanol, and dimethylsulfoxide at a low concentration slightly enhanced the activity of Gt-Tan, whereas Cu2+, Fe3+, Fe2+, Co2+, SDS, cetyltrimethylammonium bromide, DTT, Tween 80, and β-mercaptoethanol significantly inhibited its activity. Km and kcat/Km values were estimated to be 0.83 mM and 19.7 s1 mM1 for methyl gallate, 0.67 mM and 65.4 s1 mM1 for propyl gallate, and 0.22 mM and 240.8 s1 mM1 for tannic acid. These results enhanced our understanding of tannase and provided potential sources for applications in the chemical, feed, and food industries.

Production and application of inulinase by new isolates of Aspergillus welwitschiae from fermented peach-palm waste for the production of fructooligosaccharides

Microbial inulinase enzymes have a number of applications in biotechnology. In this study, new strains of Aspergillus welwitschiae were investigated as producers of inulinases and their endo- and exo-inulases were characterized in silico and their protein modeling was performed. The inulinase production by A. welwitschiae employing the Dohelert method to assess the interaction between temperature and cultivation humidity, resulted in a fourfold increase in activity. The optimal temperature and humidity were 25-27 °C and 75-82 %, respectively. The enzyme exhibited optimal activity at a pH of 3.5 and at 60 °C. The hydrolysis of the sisal root yielded 272 mg/g of reducing sugars and oligosaccharides. Our in silico experiments predicted 10 well-validated structures of endo- (5) and exo-inulinases (5) from A. welwitschiae. The notable activity of these inulinases on inulin highlights their potential for the treatment of agro-industrial residues with the objective of producing high-value added products.

Recent Advances of Tannase: Production, Characterization, Purification, and Application in the Tea Industry

Tannase, as a type of tannin-degrading enzyme, can catalyze the hydrolysis of ester and depside bonds in gallotannins, thereby releasing gallic acid and glucose. Based on this reaction mechanism, Tannase can effectively improve the problems of bitter taste, weak aroma, and tea cheese in tea infusion, and is therefore widely used in the tea industry. However, due to high production costs, difficulties in purification and recovery, and insufficient understanding of Tannase properties, the large-scale application of Tannase is severely limited. Therefore, the sources of Tannase and the effects of fermentation temperature, pH, stirring speed, time, carbon, and nitrogen sources on the preparation of Tannase are described in this study. The advantages and disadvantages of various methods for measuring Tannase activity and their enzymatic characterization are summarized, and the concentration and purification methods of Tannase are emphasized. Finally, the application of Tannase to reduce the formation of tea precipitate, enhance antioxidant capacity, increase the extraction rate of active ingredients, and improve the flavor of the tea infusion is described. This study systematically reviews the production, characterization, purification, and application of Tannase to provide a reference for further research and application of Tannase.

Expression and Immobilization of Tannase for Tannery Effluent Treatment from Lactobacillus plantarum and Staphylococcus lugdunensis: A Comparative Study

Agro-industrial discharges have higher concentrations of tannins and have been a significant cause of pollution to water bodies and soil surrounding the agro-industries. So in this study, toxic tannic acid is into commercially valuable gallic acid from the tannery effluent using immobilized microbial tannase. Tannase genes were isolated from Lactobacillus plantarum JCM 1149 (tanLpl) and Staphylococcus lugdunensis MTCC 3614 (tanA). Further, these isolated tannese genes were cloned and expressed in BL 21 host using pET 28a as an expression vector,  and immobilized in sodium alginate beads. Vegetable tannery effluent was treated by tannase-immobilized beads at 25 °C and 37 °C, where liberated gallic acid was analyzed using TLC and NMR to confirm the tannin reduction. Further, both immobilized tannases exhibited excellent reusability up to 15 cycles of regeneration without significant reduction in their activity. Moreover, we also showed that immobilized tannases tanLpl and tanA activity remained unaffected compared to the free enzyme in the presence of metal ions. Further, tanA activity remained unaffected over a wide range of pH, and tanLpl showed high thermal stability. Thus, immobilized tannase tanLpl and tanA provide a possible solution for tannery effluent treatment depending upon industry requirements and reaction composition/effluent composition, one can choose a better-immobilized tannase among the two as per the need-based requirement.

Optimization of production conditions, isolation, purification, and characterization of tannase from filamentous fungi

Tannase-producing filamentous fungi residing alongside tannin-rich ambient in the Northwest Himalayas were isolated at laboratory conditions and further identified by 18S ribosomal RNA gene sequencing. Five most potent tannase producing strains (EI ≥ 2.0), designated Aspergillus fumigatus AN1, Fusarium redolens AN2, Penicillium crustosum AN3, Penicillium restrictum AN4, and Penicillium commune AN5, were characterized. The strain Penicillium crustosum AN3 exhibited a maximum zone dia (25.66 mm ± 0.38). During solid-state fermentation, a maximal amount of tannase was attained with Penicillium crustosum AN3 using pine needles (substrate) by adopting response surface methodology for culture parameter optimization. Gel filtration chromatography yielded 46.48% of the partially purified enzyme with 3.94-fold of tannase purification. We found two subunits in enzyme-117.76 KDa and 88.51 KDa, respectively, in the SDS-PAGE. Furthermore, the characterization of partially purified tannase revealed a maximum enzyme activity of 8.36 U/mL at 30 °C using a substrate concentration (methyl gallate) of 10 mM. To broaden the knowledge of crude enzyme application, dye degradation studies were subjected to extracellular crude tannase from Penicillium crustosum AN3 where the maximum degradation achieved at a low enzyme concentration (5 ppm).

Optimization of tannase production by Aspergillus glaucus in solid-state fermentation of black tea waste

Tannases are valuable industrial enzymes used in food, pharmaceutical, cosmetic, leather manufacture and in environmental biotechnology. In this study, 15 fungal isolates were obtained from Egyptian cultivated soil and marine samples. The isolated fungi were qualitatively and quantitatively screened for their abilities to produce tannase. The selected fungal isolate NRC8 giving highest tannase activity was identified by molecular technique (18S rRNA) as Aspergillus glaucus. Among different tannin-containing wastes tested, the black tea waste was the best substrate for tannase production by Aspergillus glaucus in solid-state fermentation (SSF). Optimization of the different process parameters required for maximum enzyme production was carried out to design a suitable SSF process. Maximal tannase production was achieved with moisture content of 75%, an inoculums size of 6 × 108 spore/ml and sodium nitrate 0.2% (pH of 5.0) at 30 °C after 5 days of incubation. Box-Behnken experiment was designed to get a quadratic model for further optimization studies. Four-factor response-surface method with 27 runs was prepared using independent parameters including (moisture content %, initial pH, substrate concentration (g) and sodium nitrate concentration (g) for tannase model. The F- and P-values of the model were 4.30 and 0.002, respectively, which implied that the model is significant. In addition, the lack-of-fit was 1040.37 which indicates the same significance relative to the pure error. A. glaucus tannase was evaluated by the efficiency of conversion of tannic acid to gallic acid. Moreover, production of gallic acid from SSF process of A. glaucus using black tea waste was found to be 38.27 mg/ml. The best bioconversion efficiency was achieved at 40 °C with tannic acid concentration up to 200 g/L.

Biotransformation of gallate esters by a pH-stable tannase of mangrove-derived yeast Debaryomyces hansenii

Introduction: Tannase is a crucial enzyme that finds wide applications in the pharmaceutical industry, feed processing, and beverage manufacturing. Although extensive studies have been conducted on tannases from fungi and bacteria, reports on tannases exhibiting favorable pH stability are relatively limited. Methods: In this study, a tannin-degrading strain Debaryomyces hansenii was screened to induce tannase production, and the corresponding tannase coding gene TANF was successfully cloned and expressed in Yarrowia lipolytica. SDS-PAGE analysis revealed that the purified TanF tannase had a molecular weight of approximately 70 kDa. Results and Discussion: The enzyme demonstrated optimal activity at 40°C and retained over 80% of its activity in the range of 35°C-60°C. Of particular interest, TanF exhibited remarkable enzyme activity at pH 5.0 and retained more than 70% of its relative activity across a wide pH range of 3.0-8.0. Furthermore, TanF exhibited broad substrate specificity for gallate esters. The final gallic acid production by TanF from tannic acid achieved 18.32 g/L. Therefore, the excellent properties TanF has been demonstrated to be an efficient tool for the preparation of gallic acid.

Production, Purification and Characterization of Extracellular Tannase from a Newly Isolated Yeast, Geotrichum cucujoidarum

With an aim to isolate a tannase positive organism, the microbial mat growing on the stored areca extract leachate surface was screened. Once the tannase positive organism was isolated, it was identified by ITS/18S rRNA gene sequencing. Further, the enzyme was purified and examined for its biochemical properties. A potent extracellular tannase-producing yeast was isolated and was identified as Geotrichum cucujoidarum. After the shake flask studies, the enzyme activity of 4.42 U/ml and specific activity of 29.86 U/mg were achieved in a medium with tannic acid as an inducer. Later, ethanol (70%) precipitation followed by purification through FPLC using SEC 650 column resulted in 166.37 U/mg specific activity and a recovery of 50.54%. The purified enzyme was a monomer with a molecular weight of 63 kDa. The optimum pH and the temperature of the enzyme were found to be 5.0 and 30°C, respectively. The Michaelis-Menten constant (Km) was found to be 2.9 mM, and the turn over number (kcat) and catalytic efficiency (kcat/km) of the purified tannase were 102 S-1 and 35.17 mM-1S-1 respectively. Temperature and pH stability profiles of the enzyme, influence of various metal ions, chelators and surfactants on enzyme activity and kinetic constants of enzyme shows that the tannase produced from Geotrichum cucujoidarum is unique and is a potential candidate for further studies.

Improving the Acid Resistance of Tannase TanBLp (AB379685) from Lactobacillus plantarum ATCC14917T by Site-Specific Mutagenesis

Tannin acyl hydrolase referred commonly as tannase catalyzes the hydrolysis of the galloyl ester bond of tannin to release gallic acid. The tannase TanBLp which cloned from Lactobacillus plantarum ATCC14917^T has high activity in the pH range (7.0-9.0) at 40 °C, it would be detrimental to the utilization at acidic environment. The catalytic sites and stability of TanBLp were analyzed using bioinformatics and site-specific mutagenesis. The results reiterated that the amino acid residues Ala164, Lys343, Glu357, Asp421 and His451 had played an important role in maintaining the activity. The optimum pH of mutants V75A, G77A, N94A, A164S and F243A were shifted from 8.0 to 6.0, and mutant V75A has the highest pH stability and activity at acidic conditions than other mutants, which was more suitable for industrial application to manufacture gallic acid. This study was of great significance to promote the industrialization and efficient utilization of tannase TanBLp.

Characterization and Secretory Expression of a Thermostable Tannase from Aureobasidium melanogenum T9: Potential Candidate for Food and Agricultural Industries

Being a key industrial enzyme, tannase is extensively applied in various fields. Despite the characterizations of a large number of tannases, there are hardly a few tannases with exceptional thermostability. In this detailed study, a tannase-encoding gene named tanA was identified from Aureobasidium melanogenum T9 and heterologously expressed in Yarrowia lipolytica host of food grade. The purified tannase TanA with a molecular weight of above 63.0 kDa displayed a specific activity of 941.4 U/mg. Moreover, TanA showed optimum activity at 60°C and pH 6.0. Interestingly, TanA exhibited up to 61.3% activity after incubation for 12 h at 55°C, signifying its thermophilic property and distinguished thermostability. Additionally, TanA was a multifunctional tannase with high specific activities to catalyze the degradation of various gallic acid esters. Therefore, this study presents a novel tannase, TanA, with remarkable properties, posing as a potential candidate for food and agricultural processing.

Paradoxical effects of galloyl motifs in the interactions of proanthocyanidins with collagen-rich dentin

Plant-derived proanthocyanidins (PACs) mediate physicochemical modifications to the dentin extracellular matrix (ECM). The structure-activity relationships of PACs remain largely unknown, mostly due to the varied complex composition of crude extracts, as well as the challenges of purification and mechanistic assessment. To assess the role of galloylated PACs as significant contributors to high yet unstable biomodification activity to the dentin ECM, we removed the galloyl moieties (de-galloylation) via enzymatic hydrolysis from three galloyl-rich PAC-containing extracts (Camellia sinensis, Vitis vinifera, and Hamamelis virginiana). The biomechanical and biological properties of dentin were assessed upon treatment with these extracts vs. their de-galloylated counterparts. An increase in the complex modulus of the dentin matrix was found with all extracts, however, the crude extract was significantly higher when compared to the de-galloylated version. Exhibiting the highest content of galloylated PACs among the investigated plants, Camellia sinensis crude extract also exhibited the biggest relapse in mechanical properties after one-month incubation. De-galloylation did not modify the damping capacity of dentin ECM. Moreover, PAC-mediated protection against proteolytic degradation was unaffected by de-galloylation. The de-galloylation experiments confirmed that gallic acid in galloylated rich-PAC extracts drive stronger yet significantly less sustained mechanical effects in dentin ECM.

Immobilization of the Tannase From Aspergillus fumigatus CAS21: Screening the Best Derivative for the Treatment of Tannery Effluent Using a Packed Bed Reactor

Enzyme immobilization is an important alternative to stabilize enzyme properties favoring the efficiency of derivatives (enzyme + support/matrix) for different purposes. According to this, the current study aimed to immobilize the Aspergillus fumigatus CAS21 tannase and the use of the derivatives in the treatment of the effluent produced by the tannery industry. The tannase was immobilized on sodium alginate, DEAE-Sephadex, amberlite, and glass pearls as supports. Calcium alginate was the most adequate support for tannase immobilization with 100% yield and 94.3% for both efficiency and activity. The best tannase activity for the calcium alginate derivative was obtained at 50°C–60°C and pH 5.0. Thermal and pH stabilities evaluated for 24 h at 30°C–60°C and pH 4–7, respectively, were improved if compared to the stability of the free enzyme. Considering the reuse of the calcium alginate derivative, 78% of the initial activity was preserved after 10 catalytic cycles, and after the 9-month storage at 4°C, the activity was maintained in 70%. This derivative was applied in a packed bed reactor (PBR) for the treatment of tannin-rich effluents from the tannery industry. The reduction of the tannin content was effective reaching degradation of 74–78% after 48 h of PBR operation. The concentration of total phenolic compounds was also reduced, and the color and clarity of the effluent improved. In conclusion, the calcium alginate derivative is an attractive alternative as biocatalyst for large-scale treatment of the effluents from the tannery industry.

Heterologous expression and biophysical characterization of a mesophilic tannase following manganese nanoparticle immobilization

In the current study, we analyzed the efficacy of manganese oxide nanoparticle (MnNP)-water dispersion as an immobilization matrix for bacterial tannase. The tannase-secreting Bacillus subtilis strain NJKL.tan.2 obtained from tannery effluent soil was subsequently purified and cloned in pET20b vector. The activity of MnNP-tan (tannase activated by manganese nanoparticles) was 1.51- and 3.5-fold higher at 20 °C and 80 °C, respectively, compared with the free enzyme. MnNP-tan decreased K_m by 41.66 % and 3-fold, whereas free tannase showed two-fold and six-fold improvement in K_cat at 37 °C and 80 °C, respectively. MnNP-tan showed an increase in (half-life)t_1/2and E_d by 13-fold and 50.05 units, respectively, at 80 °C, in contrast to the native enzyme. MnNP-tan retained its residual activity by 78.2 % at 37 °C and 34.24 % at 80 °C after 180 min of incubation when compared with untreated set. MnNP-tan retained 51 % of its activity after 120 days with the native enzyme losing ∼50 % functionality following 40 days of incubation. The MnNP-mediated tannase immobilization technique is being reported for the first time. The technique has numerous advantages due to the use of MnNP as a potential matrix for biomolecule immobilization, which can be further extended to immobilize other biocatalysts used in agro-industrial and lab-based applications.

The Change Mechanism of Structural Characterization and Thermodynamic Properties of Tannase from Aspergillus niger NL112 Under High Temperature

Tannase from Aspergillus niger NL112 was purified 5.1-fold with a yield of 50.44% via ultrafiltration, DEAE-Sepharose Fast Flow column chromatography, and Sephadex G-100 column chromatography. The molecular weight of the purified tannase was estimated as 45 kDa. The optimum temperature and pH for its activity were 45 °C and 5.0, respectively. The results of circular dichroism, FT-IR (Fourier transform infrared) spectroscopy, and fluorescence spectra indicated that high temperature could lead to the change of tannase secondary and tertiary structures. Tannase had a greater affinity for tannic acid at 40 °C with a Km value of 2.12 mM and the greatest efficiency hydrolysis (Kcat/Km) at 45 °C. The rate of inactivation (k) increased with the increase of temperature and the half-life (t1/2) gradually decreased. It was found to be 1.0 of the temperature quotient (Q10) value for tannic acid hydrolysis by tannase. The thermodynamic parameters of the interaction system were calculated at various temperatures. The positive enthalpy (ΔH) values and decreasing ΔH values with the increase of temperature indicated that the hydrolysis of tannase was an endothermic process. Our results indicated that elevated temperature could change the tertiary structure of tannase and reduce its thermostability, which caused a gradual decrease of tannase activity with an increase in temperature.

Acid Stable Yeast Cell-Associated Tannase with High Capability in Gallated Catechin Biotransformation

Previously, nine tannin-tolerant and tannase-producing yeasts were isolated from Miang; all produced cell-associated tannase (CAT) during growth in tannin substrate. Among which, only CAT from Sporidiobolus ruineniae showed better stability than its purified form. Yet, it is of particular interest to directly characterize CATs from the latter yeasts. In this study, four CATs from yeasts, namely Cyberlindnera rhodanensis A22.3, Candida sp. A39.3, Debaryomyces hansenii A45.1, and Cy. rhodanensis A45.3 were characterized. The results indicate that all CATs were produced within the same production yield (11 mU/mL). Most CATs exhibited similar pH and temperature optima and stabilities, except for CAT from Cy. rhodanensis A22.3. This CAT was assigned as acid-stable tannase due to its unusual optimum pH of 2.0 with pH stability and half-life thermostability in the range of pH 2.0-4.0, and 70 °C, respectively. All CATs demonstrated high substrate specificity toward epigallocatechin gallate and epicatechin gallate, thus forming epigallocatechin and epicatechin, respectively. Moreover, they showed operational stability to repeated use for up to five cycles without loss of the initial activity. Therefore, CATs from these yeasts could be useful for the extraction and biotransformation of tea catechins and related applications.

Genome-Wide Identification of Tannase Genes and Their Function of Wound Response and Astringent Substances Accumulation in Juglandaceae

Tannins are important polyphenol compounds with different component proportions in different plant species. The plants in the Juglandaceae are rich in tannins, including condensed tannins and hydrolyzable tannins. In this study, we identified seven tannase genes (TAs) responsible for the tannin metabolism from walnut, pecan, and Chinese hickory, and three nut tree species in the Juglandaceae, which were divided into two groups. The phylogenetic and sequence analysis showed that TA genes and neighboring clade genes (TA-like genes) had similar sequences compared with other carboxylesterase genes, which may be the origin of TA genes produced by tandem repeat. TA genes also indicated higher expressions in leaf than other tissues and were quickly up-regulated at 3 h after leaf injury. During the development of the seed coat, the expression of the synthesis-related gene GGTs and the hydrolase gene TAs was continuously decreased, resulting in the decrease of tannin content in the dry sample of the seed coat of Chinese hickory. However, due to the reduction in water content during the ripening process, the tannin content in fresh sample increased, so the astringent taste was obvious at the mature stage. In addition, the CcGGTs' expression was higher than CiGGTs in the initiation of development, but CcTAs continued to be down-regulated while CiTA2a and CiTA2b were up-regulated, which may bring about the significant differences in tannin content and astringent taste between Chinese hickory and pecan. These results suggested the crucial role of TAs in wound stress of leaves and astringent ingredient accumulation in seed coats of two nut tree species in the Juglandaceae.

Contributions of protein microenvironment in tannase industrial applicability: An in-silico comparative study of pathogenic and non-pathogenic bacterial tannase

Tannase is an inducible industrially important enzyme, produced by several microorganisms. A large number of bacteria have reported as tannase producers; however, some of them are pathogenic in nature. Therefore, it is quite uncertain whether the application of these tannase enzymes from such pathogenic bacteria is suitable for industries and human welfare. Till date, there is no clear evidence regarding which group of bacteria (non-pathogenic or pathogenic) is better suited for their application in the edge of industries with particular reference to the food industry. The present study is following the findings of the above queries. In this study, a large number of tannase protein sequences have been retrieved from the databases, including both non-pathogenic and pathogenic bacterial species. Physiochemical and evolutionary properties of those sequences have been evaluated. Results have shown that non-pathogenic bacterial tannase possesses a high number of acidic and basic amino acid residues as compared to their pathogenic counterparts. The acidic and basic amino acid residues of tannase provide unique microenvironment to it. In the other hand, the numbers of disorder forming residues are higher in tannase sequences of pathogenic bacteria. The study of tannase microenvironment leads in the formation of salt bridges, which finally favoring the stability and proper functioning of tannase. This is the first report of such observation on tannase enzyme using in silico approach. Study of the microenvironment concept will be helpful in protein engineering.

Characterization of a Robust and pH-Stable Tannase from Mangrove-Derived Yeast Rhodosporidium diobovatum Q95

Tannase plays a crucial role in many fields, such as the pharmaceutical industry, beverage processing, and brewing. Although many tannases derived from bacteria and fungi have been thoroughly studied, those with good pH stabilities are still less reported. In this work, a mangrove-derived yeast strain Rhodosporidium diobovatum Q95, capable of efficiently degrading tannin, was screened to induce tannase, which exhibited an activity of up to 26.4 U/mL after 48 h cultivation in the presence of 15 g/L tannic acid. The tannase coding gene TANRD was cloned and expressed in Yarrowia lipolytica. The activity of recombinant tannase (named TanRd) was as high as 27.3 U/mL. TanRd was purified by chromatography and analysed by SDS-PAGE, showing a molecular weight of 75.1 kDa. The specific activity of TanRd towards tannic acid was 676.4 U/mg. Its highest activity was obtained at 40 °C, with more than 70% of the activity observed at 25–60 °C. Furthermore, it possessed at least 60% of the activity in a broad pH range of 2.5–6.5. Notably, TanRd was excellently stable at a pH range from 3.0 to 8.0; over 65% of its maximum activity remained after incubation. Besides, the broad substrate specificity of TanRd to esters of gallic acid has attracted wide attention. In view of the above, tannase resources were developed from mangrove-derived yeasts for the first time in this study. This tannase can become a promising material in tannin biodegradation and gallic acid production.

A commentary on methodological aspects of hydrolysable tannins metabolism in ruminant: a perspective view

Although, the application of tannic acid (TA), gallic acid (GA), natural hydrolysable tannins (HT)-rich ingredients, and HT-rich feeds in ruminant feeding have been explored in order to modify or manipulate microbial activities of digestive tract of animals, the interaction between HT and gastrointestinal microbiota and the fate of HT metabolites (GA, ellagic acid, pyrogallol, resorcinol, phloroglucinol, catechol and urolithin) derived from gastrointestinal microbial HT metabolism in the animal as a whole and animal products are missing. Incomplete biotransformation of HT and TA to GA, pyrogallol, resorcinol, phloroglucinol and other phenolic metabolites is a prevalent phenomenon discovered by researchers who examine the fate of HT metabolites in ruminant. While the rest of fellow researchers do not even examine the fate of HT metabolites and assume the complete biotransformation and fermentation of HT metabolites to volatile fatty acids (VFA). Only three studies have successfully identified the complete biotransformation and fermentation of HT metabolites to VFA in ruminant. The HT metabolites, mostly pyrogallol, produced through incomplete biotransformation of HT have adverse effects on gastrointestinal microbiota and host animal. Lack of awareness regarding the metabolism of HT metabolites and its consequences would compromise ruminant gastrointestinal microbiota, animal welfare, our environment and the power of research papers' findings. In this perspective paper, I will bring to attention a new angle on the biotransformation and fermentation of HT metabolites in gastrointestinal tract, the role of gastrointestinal microbiota and deficiency of current approach in isolating tannin-degrading bacteria from rumen. Also, suggestions for better monitoring and understanding HT metabolisms in ruminant are presented.

Integrated proteomics and metabolomics analysis of tea leaves fermented by Aspergillus niger, Aspergillus tamarii and Aspergillus fumigatus

Post-fermented Pu-erh tea (PFPT) is a microbially-fermented tea with distinct sensory qualities and multiple health benefits. Aspergillus are the dominant fungi in the fermentation and the main contributors to the characteristics of PFPT, so their underlying functions warrant detailed study. Here, tea leaves were fermented by Aspergillus niger, Aspergillus tamarii and Aspergillus fumigatus, and resulting samples (designated as Asn, Ast and Asf, respectively) were analyzed by proteomic and metabolomic methods. Changes to the composition of flavonoids, glycerophospholipids, organo-oxygen compounds and fatty acids resulting from Aspergillus fermentation were observed. Carbohydrate-active enzymes, e.g., endoglucanases and cellulases, for degradation of cellulose, starch, lignin, pectin, xylan and xyloglucan were identified. Glycoside hydrolase, glycosyltransferases, tannase, laccases, vanillyl-alcohol oxidases and benzoquinone reductase were identified and hypothesized to catalyze hydrolysis, oxidation, polymerization and degradation of phenolic compounds. Together, functions of Aspergillius were demonstrated as production of enzymes to change concentrations and compositions of metabolites in tea leaves.

Genome-Wide Analysis of Serine Carboxypeptidase-Like Acyltransferase Gene Family for Evolution and Characterization of Enzymes Involved in the Biosynthesis of Galloylated Catechins in the Tea Plant (Camellia sinensis)

Tea (Camellia sinensis L.) leaves synthesize and concentrate a vast array of galloylated catechins (e.g., EGCG and ECG) and non-galloylated catechins (e.g., EGC, catechin, and epicatechin), together constituting 8%-24% of the dry leaf mass. Galloylated catechins account for a major portion of soluble catechins in tea leaves (up to 75%) and make a major contribution to the astringency and bitter taste of the green tea, and their pharmacological activity for human health. However, the catechin galloylation mechanism in tea plants is largely unknown at molecular levels. Previous studies indicated that glucosyltransferases and serine carboxypeptidase-like acyltransferases (SCPL) might be involved in the process. However, details about the roles of SCPLs in the biosynthesis of galloylated catechins remain to be elucidated. Here, we performed the genome-wide identification of SCPL genes in the tea plant genome. Several SCPLs were grouped into clade IA, which encompasses previously characterized SCPL-IA enzymes with an acylation function. Twenty-eight tea genes in this clade were differentially expressed in young leaves and vegetative buds. We characterized three SCPL-IA enzymes (CsSCPL11-IA, CsSCPL13-IA, CsSCPL14-IA) with galloylation activity toward epicatechins using recombinant enzymes. Not only the expression levels of these SCPLIA genes coincide with the accumulation of galloylated catechins in tea plants, but their recombinant enzymes also displayed β-glucogallin:catechin galloyl acyltransferase activity. These findings provide the first insights into the identities of genes encoding glucogallin:catechin galloyl acyltransferases with an active role in the biosynthesis of galloylated catechins in tea plants.

High Performance Liquid Chromatography and Metabolomics Analysis of Tannase Metabolism of Gallic Acid and Gallates in Tea Leaves

Tannase (E.C. 3.1.1.20) is hypothesized to be involved in the metabolism of gallates and gallic acid (GA) in pu-erh tea fermentation. In this work, we measured tannase in Aspergillus niger fermented tea leaves and confirmed the production of fungal tannase during pu-erh tea fermentation. A decrease in catechin and theaflavin gallates and a significant increase in GA content and the relative peak areas of ethyl gallate, procyanidin A2, procyanidin B2, procyanidin B3, catechin-catechin-catechin, epiafzelechin, and epicatechin-epiafzelechin [variable importance in the projection (VIP) > 1.0, p < 0.05, and fold change (FC) > 1.5] were observed using high performance liquid chromatography (HPLC) and metabolomics analysis of tea leaves fermented or hydrolyzed by tannase. In vitro assays showed that hydrolysis by tannase or polymerization of catechins increased the antioxidant activity of tea leaves. In summary, we identified a metabolic pathway for gallates and their derivatives in tea leaves hydrolyzed by tannase as well as associated changes in gallate and GA concentrations caused by fungal tannase during pu-erh tea fermentation.

Integrated Meta-omics Approaches To Understand the Microbiome of Spontaneous Fermentation of Traditional Chinese Pu-erh Tea

Fermented foods play important roles in diets worldwide and account for approximately one-third of all foods and beverages consumed. To date, traditional fermentation has used spontaneous fermentation. The microbiome in fermentation has direct impacts on the quality and safety of fermented foods and contributes to the preservation of traditional methods. Here, we used an integrated meta-omics approach to study the microbiome in the fermentation of pu-erh tea, which is a well-known Chinese fermented food with a special flavor and healthful benefits. This study advanced the knowledge of microbiota, metabolites, and enzymes in the fermentation of pu-erh tea. These novel insights shed light onto the complex microbiome in pu-erh fermentation and highlight the power of integrated meta-omics approaches in understanding the microbiome in food fermentation ecosystems.

The microbiome in fermentation has direct impacts on the quality of fermented foods and is of great scientific and commercial interest. Despite considerable effort to explain the microbial metabolism associated with food fermentation, the role of the microbiome in pu-erh tea fermentation remains unknown. Here, we applied integrated meta-omics approaches to characterize the microbiome in two repeated fermentations of pu-erh tea. Metabarcoding analysis of bacterial 16S rRNA genes showed a decrease in the proportion of Proteobacteria and an increase in the abundance of Firmicutes during fermentation. Metabarcoding analysis of fungal internal transcribed spacer (ITS) sequence demonstrated that Rasamsonia, Thermomyces, and Aspergillus were dominant at the intermediate stage, whereas Aspergillus was dominant at other stages in fermentation. Metaproteomics analysis assigned primary microbial metabolic activity to metabolism and identified microbial carbohydrate-active enzymes involved in the degradation of polysaccharides including cellulose, xylan, xyloglucan, pectin, starch, lignin, galactomannan, and chitin. Metabolomics and high-performance liquid chromatography analysis revealed that levels of phenolic compounds, including gallates, decreased whereas contents of gallic acid and ellagic acid significantly increased after fermentation (P < 0.05). The changes in levels of gallates and gallic acid were associated with the hydrolysis of tannase. Glycoside hydrolases, phenol 2-monooxygenase, salicylaldehyde dehydrogenase, salicylate 1-monooxygenase, catechol O-methyltransferase, catechol dioxygenase, and quercetin 2,3-dioxygenases were hypothesized to be related to oxidation, conversion, or degradation of phenolic compounds. We demonstrated microbiota in fermentation and their function in the production of enzymes related to the degradation of polysaccharides, and metabolism of phenolic compounds, resulting in changes in metabolite contents and the quality of pu-erh tea.

IMPORTANCE Fermented foods play important roles in diets worldwide and account for approximately one-third of all foods and beverages consumed. To date, traditional fermentation has used spontaneous fermentation. The microbiome in fermentation has direct impacts on the quality and safety of fermented foods and contributes to the preservation of traditional methods. Here, we used an integrated meta-omics approach to study the microbiome in the fermentation of pu-erh tea, which is a well-known Chinese fermented food with a special flavor and healthful benefits. This study advanced the knowledge of microbiota, metabolites, and enzymes in the fermentation of pu-erh tea. These novel insights shed light onto the complex microbiome in pu-erh fermentation and highlight the power of integrated meta-omics approaches in understanding the microbiome in food fermentation ecosystems.

Integrated Approaches to Reveal Genes Crucial for Tannin Degradation in Aureobasidium melanogenum T9

Tannins biodegradation by a microorganism is one of the most efficient ways to produce bioproducts of high value. However, the mechanism of tannins biodegradation by yeast has been little explored. In this study, Aureobasidium melanogenum T9 isolated from red wine starter showed the ability for tannins degradation and had its highest biomass when the initial tannic acid concentration was 20 g/L. Furthermore, the genes involved in the tannin degradation process were analyzed. Genes tan A, tan B and tan C encoding three different tannases respectively were identified in the A. melanogenum T9. Among these genes, tan A and tan B can be induced by tannin acid simultaneously at both gene transcription and protein expression levels. Our assay result showed that the deletion of tanA and tanB resulted in tannase activity decline with 51.3 ± 4.1 and 64.1 ± 1.9 U/mL, respectively, which is much lower than that of A. melanogenum T9 with 91.3 ± 5.8 U/mL. In addition, another gene coding gallic acid decarboxylase (gad) was knocked out to better clarify its function. Mutant Δgad completely lost gallic acid decarboxylase activity and no pyrogallic acid was seen during the entire cultivation process, confirming that there was a sole gene encoding decarboxylase in the A. melanogenum T9. These results demonstrated that tanA, tanB and gad were crucial for tannin degradation and provided new insights for the mechanism of tannins biodegradation by yeast. This finding showed that A. melanogenum has potential in the production of tannase and metabolites, such as gall acid and pyrogallol.

Expression and biochemical characterization of a new alkaline tannase from Lactobacillus pentosus

Lactobacillus pentosus BA-7 and L. pentosus QA1-5 are tannin-tolerant lactic acid bacteria that were isolated from Miang, a traditional fermented tea-leaf found in northern Thailand and a tannin-rich substrate. Tannase encoding genes were isolated, cloned and overexpressed in Escherichia coli BL21(DE3). The recombinant tannase was produced with production yields of 40 and 39 KU/L for LpTanBA-7 and LpTanQA1-5, respectively. Both revealed the same molecular weight of 50 kDa as estimated by SDS-PAGE and were optimally active under alkaline pH conditions LpTanQA1-5 revealed optimal temperatures in a range of 37-40 °C as is typically found in lactic acid bacteria, while LpTanBA-7 was active at higher temperatures with an optimum temperature range of 45-55 °C. LpTanBA-7 was found to be more stable within the same range of temperatures than LpTanQA1-5. Furthermore, it was active and stable toward various organic solvents and produced 50 mg/mL of gallic acid from 100 mg/mL tannic acid. Based on the results, LpTanBA-7 is considered a new alkali-moderately thermophilic tannase obtained from lactic acid bacterium that may be capable of a feasible production capacity of gallic acid and its esters. Furthermore, tannase that is active at high temperatures could also be used in tea products in order to develop a sweet aftertaste, as well as to improve levels of antioxidant activity.

Bacterial tannases: classification and biochemical properties

Tannin acyl hydrolases, also known as tannases, are a group of enzymes critical for the transformation of tannins. The study of these enzymes, which initially evolved in different organisms to detoxify and/or use these plant metabolites, has nowadays become relevant in microbial enzymology research due to their relevant role in food tannin transformation. Microorganisms, particularly bacteria, are major sources of tannase. Cloning and heterologous expression of bacterial tannase genes and structural studies have been performed in the last few years. However, a systematic compilation of the information related to all recombinant tannases, their classification, and characteristics is missing. In this review, we explore the diversity of heterologously produced bacterial tannases, describing their substrate specificity and biochemical characterization. Moreover, a new classification based on sequence similarity analysis is proposed. Finally, putative tannases have been identified in silico for each group of tannases taking advantage of the use of the "tannase" distinctive features previously proposed.

Co-production of tannase and gallic acid by a novel Penicillium rolfsii (CCMB 714)

A novel tannase and gallic acid-producing Penicillium rolfsii (CCMB 714) was isolated from cocoa leaves from the South of Bahia. The influence of nutritional sources and the simultaneous effect of parameters involved in the fermentation process were available. Tannase (9.97 U mL^-1) and gallic acid (9 mg mL^-1) production were obtained in 48 h by submerged fermentation in non-optimized conditions. Among the carbon sources, tested gallic acid and tannic acid showed the highest tannase production (p<.05) when compared with methyl gallate and glucose. After optimization using the temperature and tannic acid concentration as variables with the Central Compound Rotational Design (CCRD), the maximal tannase production (25.6 U mL^-1) was obtained at 29.8 °C and 12.7%, respectively, which represents an increase of 2.56 times in relation to the initial activity. The parameters optimized for the maximum production of gallic acid (21.51 mg mL^-1) were 30 °C and 10% tannic acid. P. rolfsii CCMB 714 is a new strain with a high tannase and gallic acid production and the gallic acid produced is very important, mainly for its applications in the food and pharmaceutical industry.

Purification and characterization of a novel tannase produced by Kluyveromyces marxianus using olive pomace as solid support, and its promising role in gallic acid production

Tannase is considered one of the most important industrial enzymes that find great applications in various sectors. Production of tannases through solid state fermentation (SSF) using agro-industrial wastes is an eco-friendly and cheap technology. Tannase was produced by the yeast Kluyveromyces marxianus using olive pomace as a solid support under SSF. It was purified using ammonium sulfate fractional precipitation followed by Sephadex G-200 gel filtration resulting in 64.6% enzyme yield with 1026.12U/mg specific activity and 24.21 purification fold. Pure tannase had molecular weight of 65 KDa and 66.62 KDa by SDS-PAGE and gel filtration, respectively. It showed a maximal activity at 35°C having two different pH optima, one of which is acidic (4.5) and the other one is alkaline (8.5). The enzyme was stable in the acidic range of pH (4.0-5.5) for 30min, and thermostable within the temperature range 30-70°C. Using tannic acid, the enzyme had a Km value of 0.77mM and Vmax of 263.20μmolemin^-1ml^-1. The effect of different metal ions on enzymatic activity was evaluated. HPLC analysis data indicated that the purified enzyme could carry out 24.65% tannic acid conversion with 5.25 folds increase in gallic acid concentration within 30min only.

Inhibition on cholinesterase and tyrosinase by alkaloids and phenolics from Aristotelia chilensis leaves

It is reported in this study the effect of isolates from leaves of Aristotelia chilensis as inhibitors of acetylcholinesterase (AChE), butyrylcholinesterase (BChE) and tyrosinase enzymes. The aim of the paper was to evaluate the activity of A. chilensis towards different enzymes. In addition to pure compounds, extracts rich in alkaloids and phenolics were tested. The most active F5 inhibited AChE (79.5% and 89.8% at 10.0 and 20.0 μg/mL) and against BChE (89.5% and 97.8% at 10.0 and 20.0 μg/mL), showing a strong mixed-type inhibition against AChE and BChE. F3 (a mixture of flavonoids and phenolics acids), showed IC₅₀ of 90.7 and 59.6 μg/mL of inhibitory activity against AChE and BChE, inhibiting the acetylcholinesterase competitively. Additionally, F3 showed and high potency as tyrosinase inhibitor with IC₅₀ at 8.4 μg/mL. Sample F4 (anthocyanidins and phenolic composition) presented a complex, mixed-type inhibition of tyrosinase with a IC₅₀ of 39.8 μg/mL. The findings in this investigation show that this natural resource has a strong potential for future research in the search of new phytotherapeutic treatments for cholinergic deterioration ailments avoiding the side effects of synthetic drugs. This is the first report as cholinesterases and tyrosinase inhibitors of alkaloids and phenolics from A. chilensis leaves.

Expression, purification and immobilization of tannase from Staphylococcus lugdunensis MTCC 3614

Enzymes find their applications in various industries, due to their error free conversion of substrate into product. Tannase is an enzyme used by various industries for degradation of tannin. Biochemical characterization of a specific enzyme from one organism to other is one of the ways to search for enzymes with better traits for industrial applications. Here, tannase encoding gene from Staphylococcus lugdunensis was cloned and suitability of the enzyme in various conditions was analysed to find its application in various industry. The recombinant protein was expressed with 6× His tag and purified using nickel affinity beads. The enzyme was purified up to homogeneity, with approximate molecular weight of 66 kDa. Purified tannase exhibited specific activity of about 716 U/mg. Optimum enzyme activity was found to be 40 °C at pH 7.0. Biochemical characterization revealed; metal ions such as Zn2+, Fe2+, Fe3+ and Mn2+ inhibited tannase activity, and SDS at lower concentration, increased tannase activity. Non polar organic solvents increased the tannase activity and polar solvents inhibited the tannase activity. Tannase immobilization studies show protection of the enzyme under wide range of pH and temperature. Also in this study we report a method for recovery and repeated use of the tannase.

Microbial biodegradation of proteinaceous tannery solid waste and production of a novel value added product - Metalloprotease

In this study, animal fleshing (ANFL) was utilized as a substrate for the production of extracellular protease by Clostridium limosum through central composite rotatable design (CCRD) and response surface methodology (RSM). Optimum protease production of 433U/ml was achieved and the purified enzyme was identified as acidic metalloprotease, a monomeric protein. The molecular weight of the enzyme was 71kDa, whose activity was enhanced by bivalent metals such as Zn(2+) and Mg(2+). Scanning electron microscopy (SEM) examination also revealed the hydrolysis/microbial degradation of ANFL through protease activity in the anaerobic fermentation process. Simultaneous hydrolysis of ANFL and production of an enzyme with the potential for different industrial applications provide an attractive methodology for the disposal of tannery solid waste.

Structural characterization, catalytic, kinetic and thermodynamic properties of Aspergillus oryzae tannase

Tannase (EC.3.1.1.20) from Aspergillus oryzae was purified using ammonium sulphate precipitation (75%), gel filtration chromatography through Sephadex G-100, and G-200. The purified enzyme was monomeric protein with a molecular mass of 106kDa. The activation energy for tannic acid hydrolysis was 32.6kJmol^-1 and its temperature quotient (Q₁₀) was 1.0. The pK_a1 and pK_a2 values of acidic and basic limbs of the active site residues were 4.6 and 6.4. The calculated values of thermodynamic parameters for tannic acid hydrolysis, were as follows: ΔH*=30.02kJmol^-1, ΔG*=59.75kJmol^-1 ΔS*=-95.90Jmol^-1K^-1, (ΔG*_E-S)=3.66kJmol^-1 and ΔG*_E-T -12.61kJmol^-1. The pure enzyme exhibited K_m, V_max and k_cat of 4.13mM, 3507Umgprotein^-1 and 551.4s^-1_. The calculated half-life time at 40, 45, 50, 55, 60, and 70°C was 955.15, 142.0, 30.28, 17.88, 8.23 and 2.95min, respectively. The thermodynamic parameters for irreversible thermal inactivation at different temperatures (40-70°C) were determined. The enzyme was activated by Ca²⁺, and Mg²⁺ while Hg²⁺, Fe²⁺, and Cu²⁺ strongly inhibited it. Hydrolysis of tannic acid by the pure enzyme indicated that gallic acid was the end-product.

Preparation and characterization of tannase immobilized onto carboxyl-functionalized superparamagnetic ferroferric oxide nanoparticles

Tannase from Aspergillus tubingensis was immobilized onto carboxyl-functionalized Fe3O4 nanoparticles (CMNPs), and conditions affecting tannase immobilization were investigated. Successful binding between CMNPs and tannase was confirmed by Fourier transform infrared spectroscopy and thermogravimetric analysis. Vibrating sample magnetometry and X-ray diffraction showed that the CMNPs and immobilized tannase exhibit distinct magnetic responses and superparamagnetic properties. Free and immobilized tannase exhibited identical optimal temperatures of 50°C and differing pH optima at 6 and 7, respectively. The thermal, pH, and storage stabilities of the immobilized tannase were superior to those of free tannase. After six cycles of catalytic hydrolysis of propyl gallate, the immobilized tannase maintained over 60% of its initial activity. The Michaelis constant (Km) of the immobilized enzyme indicated its higher affinity for substrate binding than the free enzyme.