Bio-hythane production from microalgae biomass: Key challenges and potential opportunities for algal bio-refineries

Prospects and challenges of thermal hydrolysis pretreatment of microalgae for enhancing bioenergy and resource recovery in anaerobic bioprocesses

Microalgae have emerged as a promising feedstock for bioenergy production through anaerobic digestion and fermentation, gaining significant attention due to their rapid growth rate, ability to adapt to diverse environments, and rich biochemical composition. However, the recalcitrant nature of the microalgal cell wall necessitates pretreatment to enhance the accessibility of intracellular components and improve overall bioenergy yields from anaerobic digestion/fermentation. Among the various pretreatment methods, the thermal hydrolysis process has proven to be a promising strategy for enhancing the efficiency of bioenergy recovery from microalgal biomass. The benefits of thermal hydrolysis pretreatment of microalgae include improved organic matter solubilization, enhanced digestibility, and increased product yields in subsequent anaerobic digestion/fermentation processes for biomethane, biohydrogen, and volatile fatty acids production. However, thermal pretreatment poses challenges, such as forming future research by-products like furfural and ammonia, which can adversely affect microbial activities and reduce process efficiency. Thus, addressing its associated challenges is critical for maximizing its effectiveness in bioenergy and resource recovery. This review provides a comprehensive analysis of these challenges and offers recommendations for future research, emphasizing the need for optimized pretreatment strategies for advancing the sustainable and efficient use of microalgae in bioenergy production.

Production of Novel Energy Gases in Bioprocesses Using Undefined Mixed Cultures

Three phases of matter intermingle in various environments. The phenomena behind these fluctuations provide microbial cultures with beneficial interphase on the borderlines. Correspondingly, a bioreactor broth usually consists of a liquid phase but also contains solid particles, gas bubbles, technical surfaces, and other niches, both on a visible scale and microscopically. The diffusion limitation in the suspension is a remarkable hindrance to the reaction sequence during production. It must be overcome technically. Gas flow into the reactor could serve this purpose, and the outgoing stream or bubbling contains volatile products. The various mixing elements or gas flows should be moderated if shear forces disturb the cell growth, biochemical production, enzymatic activity, or any other crucial biological or physicochemical parameters. The focus is to optimize energy production in the form of liberated gases or their mixtures. Many combustible flows need to get purified, depending on their purpose, for example, for various engines. They provide novel sources for traffic in the air, streets, roads, and waterways, not forgetting space technology dimensions.On the other hand, industrial fuels are often used as mixtures of gases or gases with other substances. This approach may facilitate the utilization of side streams. Also, municipal energy needs can be fulfilled by microbial gases. Microbial mixed cultures could play an essential role in the big picture of sustainable industries, living of people and agriculture, exhibiting an excessive total effect on societies' multifactorial development. The gas phase is key to realizing their potential.Gaseous emissions are inherent part of all forms of microbial metabolism, both aerobic and anoxic ones. Carbon dioxide is liberated both in respiration and fermentation, but the microbiota also binds volatile carbon compounds. CO2 is also a raw material for plant cultivation, e.g., in greenhouses or in algal pools which both often represent the first steps of food chains. Additionally, they produce biomass to produce energy, biochemicals, nutrition, and soil improvement. Gaseous products of the mixed microbial cultures are valuable sources for energy production as purified gases (e.g., biomethane, biohydrogen) or as mixtures (e.g., bio-hythane, volatiles). These relatively simple molecules also serve as supplies for other hydrocarbons (e.g., methanol). Also, many microbial metabolites serve as fuel sources (e.g., bio-oil) and substrates for further biosynthesis. This versatility of potential technological options in energy-making and for industrial processes could offer huge opportunities for green energies and sustainable industries, transportation, or municipalities. In the agricultural sector, the complete recycling also includes the consideration of gas phase. This aspect provides increasing sources for clean food production. Moreover, the chemoautotrophic bacteria, including the archaeal strains, could emanate novel streams of biobased products for human use.The bioprocess always consists of a biological component and a reactor or vessel solution, plus its control and adjustment means. Some project examples are taken up introducing the combinations of these two technological mainstreams, which should be in "symbiosis" for the best results. This novel approach could lead the human activities in industries, agriculture, and municipalities into "no waste" situations. At the same time, new global resources will emerge for economically feasible and sustainable raw material sources and processes thereof. In this novel technological ecosystem, connectivity to biosphere will return and remain our societies on healthy foundations, thanks to the microbes and their communities. This chapter introduces some of the potentials.

Microalgae to bioenergy production: Recent advances, influencing parameters, utilization of wastewater - A critical review

Fossil fuel limitations and their influence on climate change through atmospheric greenhouse gas emissions have made the excessive use of fossil fuels widely recognized as unsustainable. The high lipid content, carbon-neutral nature and potential as a biofuel source have made microalgae a subject of global study. Microalgae are a promising supply of biomass for third-generation biofuels production since they are renewable. They have the potential to produce significant amounts of biofuel and are considered a sustainable alternative to non-renewable energy sources. Microalgae are currently incapable to synthesize algal biofuel on an extensive basis in a sustainable manner, despite their significance in the global production of biofuels. Wastewater contains nutrients (both organic and inorganic) which is essential for the development of microalgae. Microalgae and wastewater can be combined to remediate waste effectively. Wastewater of various kinds such as industrial, agricultural, domestic, and municipal can be used as a substrate for microalgal growth. This process helps reduce carbon dioxide emissions and makes the production of biofuels more cost-effective. This critical review provides a detailed analysis of the utilization of wastewater as a growth medium for microalgal - biofuel production. The review also highlights potential future strategies to improve the commercial production of biofuels from microalgae.

A comprehensive review on anaerobic digestion with focus on potential feedstocks, limitations associated and recent advances for biogas production

With the escalating energy demand to accommodate the growing population and its needs along with the responsibility to mitigate climate change and its consequences, anaerobic digestion (AD) has become the potential approach to sustainably fulfil our demands and tackle environmental issues. Notably, a lot of attention has been drawn in recent years towards the production of biogas around the world in waste-to-energy perspective. Nevertheless, the progress of AD is hindered by several factors such as operating parameters, designing and the performance of AD reactors. Furthermore, the full potential of this approach is not fully realised yet due the dependence on people's acceptance and government policies. This article focuses on the different types of feedstocks and their biogas production potential. The feedstock selection is the basic and most important step for accessing the biogas yield. Furthermore, different stages of the AD process, design and the configuration of the biogas digester/reactors have been discussed to get better insight into process. The important aspect to talk about this process is its limitations associated which have been focused upon in detail. Biogas is considered to attain the sustainable development goals (SDG) proposed by United Nations. Therefore, the huge focus should be drawn towards its improvements to counter the limitation and makes it available to all the rural communities in developing countries and set-up the pilot scale AD plants in both developing and developed countries. In this regard, this article talks about the improvements and futures perspective related to the AD process and biogas enhancement.

NADP+-dependent isocitrate dehydrogenase as a novel target for altering carbon flux to lipid accumulation and enhancing antioxidant capacity in Tetradesmus obliquus

Regulatory complexities in lipogenesis hinder the harmonization of metabolic carbon precursors towards lipid synthesis. Exploring regulatory complexities in lipogenesis, this study identifies NADP+-dependent isocitrate dehydrogenase (IDH) in Tetradesmus obliquus as a key factor. Overexpression IDH in strains ToIDH-1 and ToIDH-2 resulted in a 1.69 and 1.64-fold increase in neutral lipids, respectively, compared to the wild type, with lipid yield reaching 234.56 and 227.17 mg/L. Notably, despite slower growth, the cellular biomass augmented to 790.67 mg/L. Metabolite analysis indicated a shift in carbon precursors from protein to lipid and carbohydrate synthesis. Morphological observations revealed increases in the volume and number of lipid droplets, alongside a change in the fatty acid profile favoring monounsaturated and saturated fatty acids. Furthermore, IDH overexpression enhanced NADPH production and antioxidant activity, thereby further boosting lipid accumulation when combined with salt stress. This study suggests a pathway for improved lipogenesis and algal growth via metabolic engineering.

Microalgae as tools for bio-circular-green economy: Zero-waste approaches for sustainable production and biorefineries of microalgal biomass

Microalgae are promising organisms that are rapidly gaining much attention due to their numerous advantages and applications, especially in biorefineries for various bioenergy and biochemicals. This review focuses on the microalgae contributions to Bio-Circular-Green (BCG) economy, in which zero-waste approaches for sustainable production and biorefineries of microalgal biomass are introduced and their possible integration is discussed. Firstly, overviews of wastewater upcycling and greenhouse gas capture by microalgae are given. Then, a variety of valuable products from microalgal biomass, e.g., pigments, vitamins, proteins/peptides, carbohydrates, lipids, polyunsaturated fatty acids, and exopolysaccharides, are summarized to emphasize their biorefinery potential. Techno-economic and environmental analyses have been used to evaluate sustainability of microalgal biomass production systems. Finally, key issues, future perspectives, and challenges for zero-waste microalgal biorefineries, e.g., cost-effective techniques and innovative integrations with other viable processes, are discussed. These strategies not only make microalgae-based industries commercially feasible and sustainable but also reduce environmental impacts.

Algae-based treatment of a landfill leachate pretreated by coagulation-flocculation

Landfill leachate (LL) management is an urgent issue at recently closed Sisdol Landfill Site (SLS) used to dispose of solid waste generated in Kathmandu (Nepal) as untreated leachate is flowing directly to the nearby Kolpu River causing environmental and health concerns. This study aims to assess the potential of algae-based treatment of LL pretreated by optimized coagulation-flocculation (CF) for the removal of conventional pollutants such as biological oxygen demand (BOD₅), chemical oxygen demand (COD), ammonia, nitrate, and phosphate. Response Surface Methodology (RSM) was used to optimize the operating variables (dose and pH) during the pretreatment of leachate by the CF process using ferric chloride (FeCl₃.7H₂O), alum (Al₂(SO₄)₃.6H₂O) and commercial poly aluminium chloride (PAC) as coagulants using a jar test apparatus. The pretreated LL was subjected to algal treatment using the mixed microalgae culture isolated and enriched from the wastewater collection pond and grown in artificial light. The combined physicochemical and algal treatment of LL from SLS achieved 62.93-72.43%, 74.93-75.55% and 87.58-93.40% and 73.63-86.73% removal for COD, BOD₅, ammonium-nitrogen and phosphate, respectively. Thus, this research has proven the feasibility of a combined physiochemical and algae-based treatment of LL and also offers an exciting alternative to current treatment practices for LL.

Dark fermentation and microalgae cultivation coupled systems: Outlook and challenges

The implementation of a sustainable bio-based economy is considered a top priority today. There is no doubt about the necessity to produce renewable bioenergy and bio-sourced chemicals to replace fossil-derived compounds. Under this scenario, strong efforts have been devoted to efficiently use organic waste as feedstock for biohydrogen production via dark fermentation. However, the technoeconomic viability of this process needs to be enhanced by the valorization of the residual streams generated. The use of dark fermentation effluents as low-cost carbon source for microalgae cultivation arises as an innovative approach for bioproducts generation (e.g., biodiesel, bioactive compounds, pigments) that maximizes the carbon recovery. In a biorefinery context, after value-added product extraction, the spent microalgae biomass can be further valorised as feedstock for biohydrogen production. This integrated process would play a key role in the transition towards a circular economy. This review covers recent advances in microalgal cultivation on dark fermentation effluents (DFE). BioH₂ via dark fermentation processes and the involved metabolic pathways are detailed with a special focus on the main aspects affecting the effluent composition. Interesting traits of microalgae and current approaches to solve the challenges associated to the integration of dark fermentation and microalgae cultivation are also discussed.

Improved Biohythane Production from Rice Straw in an Integrated Anaerobic Bioreactor under Thermophilic Conditions

This study evaluated the feasibility of continuous biohythane production from rice straw (RS) using an integrated anaerobic bioreactor (IABR) at thermophilic conditions. NaOH/Urea solution was employed as a pretreatment method to enhance and improve biohythane production. Results showed that the maximum specific biohythane yield was 612.5 mL/g VS, including 104.1 mL/g VS for H₂ and 508.4 mL/g VS for CH₄, which was 31.3% higher than the control RS operation stage. The maximum total chemical oxygen demand (COD) removal stabilized at about 86.8%. COD distribution results indicated that 2% of the total COD (in the feed) was converted into H₂, 85.4% was converted to CH₄, and 12.6% was retained in the effluent. Furthermore, carbon distribution analysis demonstrated that H₂ production only diverted a small part of carbon, and most of the carbon flowed to the CH₄ fermentation process. Upon further energy conversion analysis, the maximum value was 166.7%, 31.7 times and 12.8% higher than a single H₂ and CH₄ production process. This study provides a new perspective on lignocellulose-to-biofuel recovery.

Recent progress and challenges in biotechnological valorization of lignocellulosic materials: Towards sustainable biofuels and platform chemicals synthesis

Lignocellulosic materials (LCM) have garnered attention as feedstocks for second-generation biofuels and platform chemicals. With an estimated annual production of nearly 200 billion tons, LCM represent an abundant source of clean, renewable, and sustainable carbon that can be funneled to numerous biofuels and platform chemicals by sustainable microbial bioprocessing. However, the low bioavailability of LCM due to the recalcitrant nature of plant cell components, the complexity and compositional heterogeneity of LCM monomers, and the limited metabolic flexibility of wild-type product-forming microorganisms to simultaneously utilize various LCM monomers are major roadblocks. Several innovative strategies have been proposed recently to counter these issues and expedite the widespread commercialization of biorefineries using LCM as feedstocks. Herein, we critically summarize the recent advances in the biological valorization of LCM to value-added products. The review focuses on the progress achieved in the development of strategies that boost efficiency indicators such as yield and selectivity, minimize carbon losses via integrated biorefinery concepts, facilitate carbon co-metabolism and carbon-flux redirection towards targeted products using recently engineered microorganisms, and address specific product-related challenges, to provide perspectives on future research needs and developments. The strategies and views presented here could guide future studies in developing feasible and economically sustainable LCM-based biorefineries as a crucial node in achieving carbon neutrality.

A novel conversion of marine macroalgal biomass to biofuel (biohydrogen) via calcium hypochlorite induced dispersion

Environmental pollution due to the consumption of non-renewable energy lead the search for alternative eco-friendly renewable fuel. The study details the biohydrogen production efficiency by potential macroalgal (Ulva reticulata) biomass improved by a disperser combined with calcium hypochlorite pretreatment technology. Calcium hypochlorite was added to decrease the surface energy of the medium induced by sole disperser pretreatment. Optimum condition for algal disperser treatment was 10,000 rpm with 30 min as dispersion time. The specific energy spent for the disintegration of the macroalgal biomass was 1231.58 kJ/kg TS. COD solubilization rate of 11.79% was attained with mechanical pretreatment whereas increased to 20.23% with combined pretreatment. Combination of disperser with calcium hypochlorite significantly reduced the specific energy input spent to 500 kJ/kg TS. The amount of organic materials such as carbohydrates, proteins and lipids released were 680 mg/L, 283 mg/L and 136 mg/L respectively. Thus, the combinative pretreatment with disperser rotor speed (10,000 rpm) for pretreatment time (12 min) and calcium hypochlorite dosage (0.1 g/g) derived as optimum condition for effective solubilization of macroalgal biomass. Biohydrogen production potential was maximum in the macroalgae pretreated with both disperser and calcium hypochlorite recorded highest yield (54.6 mL H₂/g COD) compared to the macroalgae pretreated with disperser alone (31.7 mL H₂/g COD) and untreated macroalgae (11.5 mL H₂/g COD).

Valorization of wastewater to recover value-added products: A comprehensive insight and perspective on different technologies

In recent years, due to rapid globalization and urbanization, the demand for fuels, energy, water and nutrients has been continuously increasing. To meet the future need of the society, wastewater is a prominent and emerging source for resource recovery. It provides an opportunity to recover valuable resources in the form of energy, fertilizers, electricity, nutrients and other products. The aim of this review is to elaborate the scientific literature on the valorization of wastewater using wide range of treatment technologies and reduce the existing knowledge gap in the field of resource recovery and water reuse. Several versatile, resilient environmental techniques/technologies such as ion exchange, bioelectrochemical, adsorption, electrodialysis, solvent extraction, etc. are employed for the extraction of value-added products from waste matrices. Since the last two decades, valuable resources such as polyhydroxyalkanoate (PHA), matrix or polymers, cellulosic fibers, syngas, biodiesel, electricity, nitrogen, phosphorus, sulfur, enzymes and a wide range of platform chemicals have been recovered from wastewater. In this review, the aspects related to the persisting global water issues, the technologies used for the recovery of different products and/or by-products, economic sustainability of the technologies and the challenges encountered during the valorization of wastewater are discussed comprehensively.

Biohythane production from food waste in a two-stage process: assessing the energy recovery potential

ABSTRACTBiohythane (hydrogen + methane) production in a two stage dark fermentation (DF) and anaerobic digestion (AD) process from food waste (FW) has been studied. This paper investigated the effect of operation temperature, i.e. mesophilic (34 °C) and thermophilic (55 °C) , on biohythane yield and total energy recovery carried out at the initial culture pH 5.5 and pH 7, respectively for DF and AD batch tests. The mesophilic DF tests gave a higher hydrogen yield of 53.5 (±4) mL H₂/g VS added compared to thermophilic DF tests, i.e. 37.6 (±1) mL H₂/g VS added. However, higher methane yields, i.e. 307.5 (± 10) mL CH₄/g VS, were obtained at thermophilic AD tests compared to mesophilic AD, i.e. 276.5 (±4.3) mL CH₄/g VS. The total energy recovery from thermophilic DF + AD was higher (11.4 MJ/kg VS) than the mesophilic (10.4 MJ/kg VS) combined process. Interestingly, the analysis of kinetic parameters of mesophilic tests, determined from the Modified Gompertz equation, showed that mesophilic DF had faster H₂ production kinetics, which can be attributed to a faster adaptation of the heat-shocked inoculum used in the tests to the incubation temperature. However, thermophilic AD tests exhibited faster kinetics for methane production.

Effect of mixing ratio and total solids content on temperature-phased anaerobic codigestion of rice straw and pig manure: Biohythane production and microbial structure

Long-term semi-continuous experiments were carried out under three feedstock conditions to study the effects of mixing ratio and total solids (TS) content on temperature-phased anaerobic codigestion of rice straw (RS) and pig manure (PM). The results showed that biohythane only produced from the mixture with 6% TS content and its average content were 12.83 ± 1.19% (hydrogen) and 23.68 ± 1.12% (methane). Increasing mixture TS content and decreasing its RS ratio increased biohythane production and organic matter removal by creating a suitable process pH and increasing the anaerobic reaction rates. The highest biohythane production of the mixture reached 73.09 ± 3.03 ml/g VS (hydrogen) and 235.81 ± 9.30 ml/g VS (methane) at a mixing ratio of 5:1 and TS content of 6%. A variety of hydrogen-producing bacteria were found in the thermophilic reactor and Clostridium_sensu_stricto_1 played an important role. Butyric acid fermentation is the main hydrogen-producing pathway. Methanobacterium and Methanosaeta were dominant archaea in the mesophilic reactor.

The usage of Cyanobacteria in wastewater treatment: prospects and limitations

The applicability of Cyanobacteria executes various roles in the treatment of wastewater, assembling of superfluous food and, thus, produces valued biomass which has various applications. Besides this, they enrich and improve the quality of water as they are photosynthetic autotrophs. Currently, Cyanobacteria gained momentum for remediation of wastewaters because firstly, they enhances the O₂ content of waters through photosynthesis and perform bioremediation of some heavy metals. Secondly, Cyanobacteria play significant roles in distressing the biological oxygen demand, chemical oxygen demand, turbidity, minerals and microbes; thirdly, they can be used either as axenic cultures or as mixed cultures both offering distinct advantages. Lastly, some species are tolerant towards extreme temperatures both low and high, acidic pH, high salt concentrations and heavy metals, which makes them outstanding candidates for the wastewater treatment plants. The suitable immobilization methods must evolve, better understanding of their morphological and biochemical parameters is required for the optimum growth, easy methods of harvesting the biomass after the treatment are required and more trials on large-scale basis are required before they can be launched on full-fledged basis for wastewater treatments.

Municipal Wastewater: A Sustainable Source for the Green Microalgae Chlorella vulgaris Biomass Production

The need to reduce the costs associated with microalgae cultivation encouraged scientific research into coupling this process with wastewater treatment. Thus, the aim of this work was to assess the growth of Chlorella vulgaris (Chlorophyta) in different effluents from a municipal wastewater treatment plant (WWTP), namely secondary effluent (SE) and sludge run-off (SR). Assays were performed, under the same conditions, in triplicate with 4 dilution ratios of the wastewaters (25%, 50%, 75% and 100%) with the standard culture medium bold basal medium double nitrated (BBM2N) as a control. The capability of C. vulgaris for biomass production, chlorophyll synthesis and nutrients removal in the SE and SR was evaluated. The 25% SE and 25% SR showed increased specific growth rates (0.47 and 0.55 day−1, respectively) and higher biomass yields (8.64 × 107 and 1.95 × 107 cells/mL, respectively). Regarding the chlorophyll content, the 100% SR promoted the highest concentration of this pigment (2378 µg/L). This green microalga was also able to remove 94.8% of total phosphorus of SE, while in 50% SR, 31.2% was removed. Removal of 73.9% and 65.9% of total nitrogen in 50% and 100% SR, respectively, was also observed. C. vulgaris growth can, therefore, be maximized with the addition of municipal effluents, to optimize biomass production, while cleansing the effluents.

Digestate as Sustainable Nutrient Source for Microalgae—Challenges and Prospects

The interest in microalgae products has been increasing, and therefore the cultivation industry is growing steadily. To reduce the environmental impact and production costs arising from nutrients, research needs to find alternatives to the currently used artificial nutrients. Microalgae cultivation in anaerobic effluents (more specifically, digestate) represents a promising strategy for increasing sustainability and obtaining valuable products. However, digestate must be processed prior to its use as nutrient source. Depending on its composition, different methods are suitable for removing solids (e.g., centrifugation) and adjusting nutrient concentrations and ratios (e.g., dilution, ammonia stripping). Moreover, the resulting cultivation medium must be light-permeable. Various studies show that growth rates comparable to those in artificial media can be achieved when proper digestate treatment is used. The necessary steps for obtaining a suitable cultivation medium also depend on the microalgae species to be cultivated. Concerning the application of the biomass, legal aspects and impurities originating from digestate must be considered. Furthermore, microalgae species and their application fields are essential criteria when selecting downstream processing methods (harvest, disintegration, dehydration, product purification). Microalgae grown on digestate can be used to produce various products (e.g., bioenergy, animal feed, bioplastics, and biofertilizers). This review gives insight into the origin and composition of digestate, processing options to meet requirements for microalgae cultivation and challenges regarding downstream processing and products.

Advanced microalgae-based renewable biohydrogen production systems: A review

The reliance of fossil fuel for industrial and energy sectors has resulted in its depletion. Therefore, enormous efforts have been considered to move-out from fossil fuels to renewable energy sources based industrial process developments. Recently, biohydrogen (bio-H₂) has been recognised as a clean source of fuel with high-energy efficiency, which can be produced via different routes. Among them, biological fermentation processes are highly recommended due to eco-friendly and economically viable approaches compared to that of thermochemical processes. However, the low H₂ yield and high production cost are major bottlenecks for commercial scale operations. Thus, this review proposed an integrated microalgae-based H₂ production process, which will provides a possible route for commercialization in near future. Furthermore, process integration to improve efficiency and implementation of advanced strategies for the enhancement of bio-H₂ production, economic viability, and future research needs are discussed.

Global opportunities and challenges on net-zero CO2 emissions towards a sustainable future

Artistic representation of CO2 emissions from various sources into the atmosphere, and its consequence on the global climatic conditions.

Integrated biorefinery routes of biohydrogen: Possible utilization of acidogenic fermentative effluent

Biohydrogen production and integration possibilities are vital towards hydrogen economy and sustainability of the environment. Acidogenic fermentation is acquiring great interest and it is one of the prime pathways to produce biohydrogen and short chain carboxylic acids. In addition to hydrogen recovery, simultaneously nearly 60 percent of the organics may get converted to ethanol, 1,3propanediol and organic acids. Besides, these organics (fermentative effluents) can be used indirectly as a raw material for the generation of value- added products such as biolipid, polyhydroxyalkanoates, excess hydrogen, methane and electrical energy recovery. In this regard, this review has been assessed as a valuable biorefinery for biofuel and value- added products recovery. The biorefinery can be used to minimize entire cost of the approach by obtaining extra profits.

Biohythane production and microbial characteristics of two alternating mesophilic and thermophilic two-stage anaerobic co-digesters fed with rice straw and pig manure

To investigate biohythane production and microbial behavior during temperature-phased (TP) anaerobic co-digestion (AcD) of rice straw (RS) and pig manure (PM), a mesophilic-thermophilic (M1-T1) AcD system and a thermophilic-mesophilic (T2-M2) AcD system were continuously operated for 95 days in parallel. The maximal ratio (8.44%v/v) of produced hydrogen to methane demonstrated the feasibility of biohythane production by co-digestion of RS and PM. T2-M2 exhibited higher hydrogen (16.68 ± 1.88 mL/gVS) and methane (197.73 ± 11.77 mL/gVS) yields than M1-T1 (3.08 ± 0.39 and 109.03 ± 4.97 mL/gVS, respectively). Methanobrevibacter (75.62%, a hydrogenotrophic methanogen) dominated in the M1 reactor, resulting in low hydrogen production. Hydrogen-producing bacteria (Thermoanaerobacterium 32.06% and Clostridium_sensu_stricto_1 27.33%) dominated in T2, but the abundance of hydrolytic bacteria was low, indicating that hydrolysis could be a rate-limiting step. The thermophilic acid-producing phase provided effective selective pressure for hydrogen-consuming microbes, and the high diversity of microbes in M2 implied a more efficient pathway of methane production.

A Cyanobacteria-Based Biofilm System for Advanced Brewery Wastewater Treatment

Algal/cyanobacterial biofilm photobioreactors provide an alternative technology to conventional photosynthetic systems for wastewater treatment based on high biomass production and easy biomass harvesting at low cost. This study introduces a novel cyanobacteria-based biofilm photobioreactor and assesses its performance in post-treatment of brewery wastewater and biomass production. Two different supporting materials (glass/polyurethane) were tested to investigate the effect of surface hydrophobicity on biomass attachment and overall reactor performance. The reactor exhibited high removal efficiency (over 65%) of the wastewater’s pollutants (chemical oxygen demand, nitrate, nitrite, ammonium, orthophosphate, and total Kjeldahl nitrogen), while biomass per reactor surface reached 13.1 and 12.8 g·m−2 corresponding to 406 and 392 mg·L−1 for glass and polyurethane, respectively, after 15 days of cultivation. The hydrophilic glass surface favored initial biomass adhesion, although eventually both materials yielded complete biomass attachment, highlighting that cell-to-cell interactions are the dominant adhesion mechanism in mature biofilms. It was also found that the biofilm accumulated up to 61% of its dry weight in carbohydrates at the end of cultivation, thus making the produced biomass a suitable feedstock for bioethanol production.

Sustainable lipid and lutein production from Chlorella mixotrophic fermentation by food waste hydrolysate

Bioconversion of food waste into value-added products is a promising way to tackle the global food waste management problem. In this study, a novel valorisation strategy for bioenergy and lutein production via microalgal fermentation was investigated. Significant amount of glucose was recovered from enzymatic hydrolysis of food waste. The resultant hydrolysate was then utilised as culture medium in mixotrophic cultivation of Chlorella sp. to obtain high levels of lipid and lutein, whose accumulation patterns were consistent with molecular analyses. The resultant algal lipid derived from microalgal biomass using food hydrolysate was at high quality in terms of biodiesel properties. Further, in semi-continuous fermentation, the average algal biomass was 6.1 g L^-1 with 2.5 g L^-1 lipid and 38.5 mg L^-1 lutein using hydrolysate with an initial glucose concentration of 10 g L^-1. Meanwhile, the resultant algal biomass was 6.9 g L^-1 with 1.8 g L^-1 lipid and 63.0 mg L^-1 lutein using hydrolysate with an initial glucose concentration of 20 g L^-1, which suggests food waste hydrolysate could trigger algal products preferences. The experimental results of this study suggested the potential of microalgae as a platform for bioconversion of food waste into high-value products, especially sustainable bioenergy.

Methanol Electrolysis for Hydrogen Production Using Polymer Electrolyte Membrane: A Mini-Review

Hydrogen (H2) has attained significant benefits as an energy carrier due to its gross calorific value (GCV) and inherently clean operation. Thus, hydrogen as a fuel can lead to global sustainability. Conventional H2 production is predominantly through fossil fuels, and electrolysis is now identified to be most promising for H2 generation. This review describes the recent state of the art and challenges on ultra-pure H2 production through methanol electrolysis that incorporate polymer electrolyte membrane (PEM). It also discusses about the methanol electrochemical reforming catalysts as well as the impact of this process via PEM. The efficiency of H2 production depends on the different components of the PEM fuel cells, which are bipolar plates, current collector, and membrane electrode assembly. The efficiency also changes with the nature and type of the fuel, fuel/oxygen ratio, pressure, temperature, humidity, cell potential, and interfacial electronic level interaction between the redox levels of electrolyte and band gap edges of the semiconductor membranes. Diverse operating conditions such as concentration of methanol, cell temperature, catalyst loading, membrane thickness, and cell voltage that affect the performance are critically addressed. Comparison of various methanol electrolyzer systems are performed to validate the significance of methanol economy to match the future sustainable energy demands.

Energy conservation in photosynthetic microorganisms

Photosynthesis is a biological process of energy conversion from solar radiation to useful organic compounds for the photosynthetic organisms themselves. It, thereby, also plays a role of food production for almost all animals on the Earth. The utilization of photosynthesis as an artificial carbon cycle is also attracting a lot of attention regarding its benefits for human life. Hydrogen and biofuels, obtained from photosynthetic microorganisms, such as microalgae and cyanobacteria, will be promising products as energy and material resources. Considering that the efficiency of bioenergy production is insufficient to replace fossil fuels at present, techniques for the industrial utilization of photosynthesis processes need to be developed intensively. Increase in the efficiency of photosynthesis, the yields of target substances, and the growth rates of algae and cyanobacteria must be subjects for efficient industrialization. Here, we overview the whole aspect of the energy production from photosynthesis to biomass production of various photosynthetic microorganisms.

Anaerobic granulation: A review of granulation hypotheses, bioreactor designs and emerging green applications

Successful installations and operation of many granulation-base treatment plants all over the world in the recent years are reported. A better knowledge towards reactor operation and system performance has led to a growing interest in the technology. While the technology is well accepted and abundant research work has been carried out, insight unfolding the granulation fundamentals and its engineering applications remains unclear. This paper presents a review of some major hypotheses describing the evolvement of anaerobic granules. A number of physico-chemical hypotheses based on thermodynamics and structural hypotheses incorporating microbial considerations for anaerobic granulation have been developed. Features of anaerobic granulation and bioreactor designs are also reviewed. Advances in granulation research with respect to hydrogen production, degradation of recalcitrant or toxic compounds and emissions mitigation are delineated. Prospects and challenges of anaerobic granulation in wastewater treatment are also outlined.

Flexible control of biohythane composition and production by dual cathodes in a bioelectrochemical system

Flexible control of CH₄/H₂ ratio in biohythane is important to its applications but remains a challenge. Herein, a dual-cathode bioelectrochemical system (BES) was developed for achieving biohythane production with controllable composition through adjusting external resistance. The BES was started as a microbial electrolysis cell to produce hydrogen in both cathodes ("H₂-cathode") and then evolved to produce methane production in one cathode with inoculation of anaerobic sludge ("CH₄-cathode"). When increasing the external resistance of the H₂-cathode from 10 to 330 Ω, its H₂ production decreased from 173 ± 11 to 8 ± 2 L m^-3 d^-1. This redistribution of electrons has benefited the CH₄-cathode that had an increased CH₄ production from 25 ± 3 to 90 ± 5 L m^-3 d^-1. The CH₄/H₂ ratio increased from 0.14 to 11, making biohythane more applicable to natural gas engines. Those results will help to formulate a BES-based approach to accomplish controllable biohythane production.

Grid columnar flat panel photobioreactor with immobilized photosynthetic bacteria for continuous photofermentative hydrogen production

A biophotoreactor with a transparent glass flat panel with polymethyl methacrylate (PMMA) grid columnar for enhanced biofilm growth with Rhodopseudomonas palustris GCA009 was developed and tested at 590 nm incident light. Continuous photofermentative hydrogen production from glucose was tested using this novel reactor. At light intensity of 210 W/m², feed substrate concentration of 56.0 mmol/L, and crossflow velocity of 1.68 × 10^-6 m/s, a maximum hydrogen production rate of 32.6 mmol/L-d (3.56 mmol/m²-h), hydrogen yield of 1.15 mol H₂/mol glucose and light conversion efficiency of 5.34% can be achieved. Since the revised grid columnar effectively enlarged the surface area of reactor and enhanced cell attachment, the present reactor design led to higher hydrogen production rates than literature works.

Nanoparticle induced biological disintegration: A new phase separated pretreatment strategy on microalgal biomass for profitable biomethane recovery

This study involves the application of new phase separated biological pretreatment (PSBP) strategy on microalgal biomass using the nickel nanoparticle induced cellulase secreting bacterial disintegration. Particularly, interest was focussed on cell wall weakening (CWW) of microalgae biomass besides the cell disintegration (CD) and release of organics. During CWW, protein, carbohydrate, cellulose, hemicellulose and DNA were used as evaluation indexes. Similarly, during CD, soluble chemical oxygen demand was used as evaluation index to assess the disintegration effect. A higher CWW was achieved at nickel nanoparticle (Np) dosage of 0.004 g/g SS. During CD, a clear demarcation in biomass solubilisation was achieved by PSBP (36%) than the sole biological pretreatment -BP (24%). The biomethanogenesis test results showed that enhanced methane production of 411 mL/g COD was achieved by PSBP than BP. Energy analysis showed that a higher net energy production of 6.467 GJ/d was achieved by PSBP.

State of the art and challenges of biohydrogen from microalgae

Biohydrogen from microalgae has attracted extensive attention owing to its promising features of abundance, renewable and self sustainability. Unlike other well-established biofuels like biodiesel and bioethanol, biohydrogen from microalgae is still in the preliminary stage of development. Criticisms in microalgal biohydrogen centered on its practicality and sustainability. Various laboratory- and pilot-scale microalgal systems have been developed, and some research initiatives have exhibited potential for commercial application. This work provides a review of the state of the art of biohydrogen from microalgae. Discussions include metabolic pathways of light-driven transformation and dark fermentation, reactor schemes and system designs encompassing reactor configurations and light manipulation. Challenges, knowledge gaps and the future directions in metabolic limitations, economic and energy assessments, and molecular engineering are also delineated. Current scientific and engineering challenges of microalgal biohydrogen need to be addressed for technology leapfrog or breakthrough.

New method for algae comprehensive utilization: Algae-derived biochar enhances algae anaerobic fermentation for short-chain fatty acids production

Interest in the resource utilization of algae has gradually increased due to the frequent occurrence of harmful algal blooms. Here, biochar derived from algae was applied to algae anaerobic fermentation for short-chain fatty acids (SCFAs) production. In the presence of algae-derived biochar, the concentration of SCFAs within 4 d (4334 mg COD/L) was approximately doubled compared to the control (2016 mg COD/L), and the fermentation time for maximal SCFAs yield was shortened. Biochar improved the disruption of algae to release more intracellular macromolecular organics. Altering algae hydrolysis, the activity of hydrolase and the contents of functional gene were advantageous to SCFAs accumulation by providing more micromolecular organics in the presence of biochar. Additionally, the relative abundance and survival of acid-forming bacteria were enhanced significantly. Furthermore, biochar accelerated the electron transport and energy synthesis in the biological system, driving the biological reactions that allow microorganisms to function and life to flourish.

Life cycle environmental impacts of biogas production and utilisation substituting for grid electricity, natural gas grid and transport fuels

In this study, life cycle analysis (LCA) has been applied to evaluate the environmental impacts of biogas production and utilisation substituting for grid electricity, natural gas grid and transport fuels, with a focus on Greenhouse Gas (GHG) emissions. The results demonstrate significant reductions in greenhouse gas emissions for the biogas as a fuel scenario due to the displacement of fossil petrol and diesel fuels (scenario 3), with savings of between 524 and 477 kg of CO₂ equivalent (per MWh of energy provided by the fuels). The utilisation of biogas for electricity generation saves around 300 kg of CO₂ equivalent per MWh of electricity injected into the grid (scenario 1), while Scenario 2, the upgrading of biogas to biomethane and its injection into the gas grid for heating saves 191 kg of CO₂ equivalent (per MWh of energy generated by the biomethane). The results emphasise the benefits of using life cycle analysis to provide an evidence based for bioenergy policy. The limitations of the research are identified and recommendations made for future research priorities to further the use of LCA in the evaluation of bioenergy systems.

Effects of light intensity on biomass, carbohydrate and fatty acid compositions of three different mixed consortia from natural ecological water bodies

This study investigated the effect of light intensity on three various microalga consortia collected from natural ecological water bodies (named A, B and C) towards their fatty acid profiling and fractions, carbohydrate and protein production at different light intensities of 100, 200 and 300 μmol m^-2 s^-1. The results indicating that increasing light intensity positively correlated with the lipid production than carbohydrate and protein. Irrespective to the solids (Total and Volatile Solid) content, lipids and carbohydrate has varied significantly. Consortia C showed higher productivity toward lipids, whereas consortia A and B accumulated more carbohydrate and protein, respectively. The microscopic images revealed the breakdown of cells during the increase in light intensity, in spite, the similar algal species were observed in all consortia experimented. Principal component analysis (PCA) revealed that low light intensity aid relatively in high protein, Total Nitrogen and Total Phosphorus, meanwhile high intensity attributed carbohydrates and unsaturated fatty acids (USFA) contents.

Combining Microwave Pretreatment with Iron Oxide Nanoparticles Enhanced Biogas and Hydrogen Yield from Green Algae

The available energy can be effectively upgraded by adopting smart energy conversion measures. The biodegradability of biomass can be improved by employing pretreatment techniques; however, such methods result in reduced energy efficiency. In this study, microwave (MW) irradiation is used for green algae (Enteromorpha) pretreatment in combination with iron oxide nanoparticles (NPs) which act as a heterogeneous catalyst during anaerobic digestion process for biogas enhancement. Batch-wise anaerobic digestion was carried out. The results showed that MW pretreatment and its combination with Fe3O4 NPs produced highest yields of biogas and hydrogen as compared to the individual ones and control. The biogas amount and hydrogen % v/v achieved by MW pretreatment + Fe3O4 NPs group were 328 mL and 51.5%, respectively. The energy analysis indicated that synergistic application of MW pretreatment with Fe3O4 NPs produced added energy while consuming less input energy than MW pretreatment alone. The kinetic parameters of the reaction were scientifically evaluated by using modified Gompertz and Logistic function model for each experimental case. MW pretreatment + Fe3O4 NPs group improved biogas production potential and maximum biogas production rate.

A review of the innovative gas separation membrane bioreactor with mechanisms for integrated production and purification of biohydrogen

This review article focuses on an assessment of the innovative Gas Separation Membrane Bioreactor (GS-MBR), which is an emerging technology because of its potential for in-situ biohydrogen production and separation. The GS-MBR, as a special membrane bioreactor, enriches CO₂ directly from the headspace of the anaerobic H₂ fermentation process. CO₂ can be fed as a substrate to auxiliary photo-bioreactors to grow microalgae as a promising raw material for biocatalyzed, dark fermentative H₂-evolution. Overall, these features make the GS-MBR worthy of study. To the best of the authors' knowledge, the GS-MBR has not been studied in detail to date; hence, a comprehensive review of this topic will be useful to the scientific community.

Evaluation of gradual adaptation of mixed microalgae consortia cultivation using textile wastewater via fed batch operation

This study investigated mixed microalgae consortia cultivation in a fed batch reactor using textile wastewater. The results showed 95% of total phosphorus (TP) and 70% of total nitrogen (TN) depletion during the operational period. Algal biomass growth, pollutant removal, and biomass constituents were examined for five cycles of the fed batch operation. The length of the cycles decreased from 30 days to 10 days as the cycle repeated, which implied gradual adaptation of microalgae to textile wastewater. Color of textile wastewater was removed in the range of 68-72% in all the cycles experimented. Microbial algal cultivation with textile wastewater would be a feasible approach for remediation and resource recovery purpose.

Biogas production from different lignocellulosic biomass sources: advances and perspectives

The present work summarizes different sources of biomass used as raw material for the production of biogas, focusing mainly on the use of plants that do not compete with the food supply. Biogas obtained from edible plants entails a developed technology and good yield of methane production; however, its use may not be sustainable. Biomass from agricultural waste is a cheap option, but in general, with lower methane yields than those obtained from edible plants. On the other hand, the use of algae or aquatic plants promises to be an efficient and sustainable option with high yields of methane produced, but it necessary to overcome the existing technological barriers. Moreover, these last raw materials have the additional advantage that they can be obtained from wastewater treatment and, therefore, they could be applied to the concept of biorefinery. An estimation of methane yield per hectare per year of the some types of biomass and operational conditions employed is presented as well. In addition, different strategies to improve the yield of biogas, such as physical, chemical, and biological pretreatments, are presented. Other alternatives for enhanced the biogas production such as bioaugmentation and biohythane are showed and finally perspectives are mentioned.

Bio-Based Products from Microalgae Cultivated in Digestates

In recent years the increasing demand for food, energy, and valuable chemicals has necessitated research and development on renewable, novel, and sustainable sources. Microalgae represent a promising option to produce various products with environmentally friendly applications. However, several challenges must be overcome to reduce production cost. To this end, using effluents from biogas production units, called digestates, in cultivation systems can help to optimize bioprocesses, and several bioproducts including biofuels, biofertilizers, proteins and valuable chemicals can be obtained. Nevertheless, several parameters, including the productivity and quality of biomass and specific target products, downstream processes, and cost-effectiveness, must be improved. Further investigations will be necessary to take full advantage of the produced biomass and effectively upscale the process.