Research on the treatment mechanism of anthraquinone dye wastewater by algal-bacterial symbiotic system

New insights into microalgal-bacterial immobilization systems for wastewater treatment: mechanisms, enhancement strategies, and application prospects

The wastewater treatment based on the symbiosis of microalgae and bacteria has attracted increasing attention for its excellent pollutant removal efficiency, energy savings, and resource recovery. Among them, the microalgae-bacteria immobilization (MABI) system stands out by enhancing the electron transfer efficiency through carrier domain confinement, thereby overcoming bottlenecks of low light energy utilization and challenging biomass recycling. MABI is considered a key breakthrough for advancing engineering applications. However, a comprehensive exploration of MABI systems remains lacking. This review systematically summarizes the latest advancements, covering major immobilization techniques and the intrinsic mechanisms underlying microalgae-bacteria interactions and electron transport. Additionally, it explores enhancement strategies aimed at balancing microbial light energy allocation, optimizing nutrient supply, and constructing complementary ecological niches. The advantages and application prospects of MABI systems are highlighted. The review contributes to structuring the knowledge framework of MABI research and identifies critical gaps for future investigation.

Mechanistic and adsorption kinetics study of sulfonated activated carbon enhanced starch-based aerogel for high efficient adsorption of cationic and anionic dyes

Starch-based aerogels, with their low density, high porosity, and high specific surface area, show potential for application in dye adsorption. However, most of the current starch-based aerogels exhibited limitations, such as limited adsorption capacity and poor ability to selective treatment in complex dye wastewater. In this study, acrylic acid (AA) and allyl sulfonic acid sodium salt (AS) were grafted onto the carboxymethyl starch sodium (CMS) backbone via UV-induced radical polymerization, and combined with sulfonated activated carbon (SAC) to prepare a CAA/SAC starch-based aerogel with low density (0.29 g/cm3), high porosity (86.48 %), and notable swelling capacity (60.78 g/g). Activated carbon with porous structures was sulfonated with concentrated sulfuric acid to introduce -SO3H groups. These groups, along with the negative charges on CMS, AA, and AS, enable selective adsorption of cationic dyes. The adsorption capacity of CAA/SAC aerogel for the cationic dye methylene blue was 136.43 mg/g, which was significantly higher than that of the anionic dye methyl orange (69.31 mg/g). The adsorption process followed both pseudo-second-order kinetics and Langmuir isotherm. The CAA/SAC aerogel can effectively remove dye molecules from wastewater, showing promising potential for various wastewater treatment applications.

Common issues of data science on the eco-environmental risks of emerging contaminants

Data-driven approaches (e.g., machine learning) are increasingly used to replace or assist laboratory studies in the study of emerging contaminants (ECs). In the past ten years, an increasing number of models or approaches have been applied to ECs, and the datasets used are continuously enriched. However, there are large knowledge gaps between what we have found and the natural eco-environmental meaning. For most published reviews, the contents are organized by the types of ECs, but the common issues of data science, regardless of the type of pollutant, are not sufficiently addressed. To close or narrow the knowledge gaps, we highlight the following issues ignored in the field of data-driven EC research. Complicated biological and ecological data and ensemble models revealing mechanisms and spatiotemporal trends with strong causal relationships and without data leakage deserve more attention in the future. In addition, the matrix influence, trace concentration, and complex scenario have often been ignored in previous works. Therefore, an integrated research framework related to natural fields, ecological systems, and large-scale environmental problems, rather than relying solely on laboratory data-related analysis, is urgently needed. Beyond the current prediction purposes, data science can inspire the discovery of scientific questions, and mutual inspiration among data science, process and mechanism models, and laboratory and field research is a critical direction. Focusing on the above urgent and common issues related to data, frameworks, and purposes, regardless of the type of pollutant, data science is expected to achieve great advancements in addressing the eco-environmental risks of ECs.

Treatment of compound pollution in simulated livestock and poultry wastewater by algae-bacteria symbiosis system

Livestock and poultry breeding wastewater contains a large number of heavy metals and antibiotics; the volume is huge, and it is difficult to treat, which causes serious pollution of the environment. Some studies have shown that symbiotic systems can effectively improve the efficiency of sewage treatment, but there is still a lack of research on the treatment of livestock and poultry wastewater. This experiment not only provides a more in-depth discussion of previous studies, but also demonstrates the feasibility of symbiotic treatment of livestock and poultry wastewater and explores the survival mode and operation mechanism of algal and bacterial symbiosis. The results show that the presence of bacteria greatly promoted the growth of microalgae, with production of 0.50-0.59 g/L biomass and 17.5% lipid content. Lipid levels in the algae from the symbiotic system were 1.3 times higher than for the system of pure algae, which is attributed to the bacteria releasing extracellular substances to promote their own growth and providing small molecules of organic matter and other essential elements which can be used by microalgae. In addition, during the removal of complex pollutants in the symbiotic system we found that the main contributor to the removal of heavy metal ions was the adsorption by Chlorella, while the decomposition of antibiotics mainly originated from bacteria. Furthermore, in the context of this experiment was obtained the highest removal rate of SM2 reached 28.8%, while the removal rate of Cu(II) reached 60.6%-66.7%. The technology of symbiotic treatment of wastewater from livestock and poultry breeding fills a gap and lays a theoretical foundation for the improvement of wastewater treatment.

Salt-free neutral dyeing of cotton fiber with monochlorotriazine type reactive dyes

In this paper, we present the modification of cotton with glycidyltrimethylammonium chloride (GTA), demonstrating its capability not only for salt-free dye adsorption but also for achieving fixation reactions with monochlorotriazine-type reactive dyes under neutral conditions. The results of adsorption kinetics and isotherm experiments indicate that the adsorption of reactive dyes by modified cotton is chemisorption. Color-stripping experiments conducted on modified cotton dyed with different dyes revealed that GTA-modified cotton underwent fixation reactions with monochlorotriazine-type reactive dyes under neutral conditions. The reaction sites of modified cotton with reactive dyes were determined by measuring the 1H NMR of the model reaction products. Mechanism investigation using Density Functional Theory (DFT) on the fixation reaction revealed that the hydroxyl groups on the modification agent chain exhibit a lower pKa value and carry more negative charge, resulting in a lower reaction barrier with monochlorotriazine-type reactive dyes. Our research findings demonstrate that GTA-modified cotton fiber enhance the reactivity of cotton, providing significant guidance for the development of novel modifiers.

Deciphering the ecological impact of azo dye pollution through microbial community analysis in water-sediment microcosms

The uncontrolled release of untreated dyeing wastewater into aquatic ecosystems poses global environmental risks. It alters native microbial communities and associated ecological processes, often going unnoticed. Therefore, the influence of acid orange 7 dye (AO7) contamination on the natural microbial community was investigated using a water-sediment microcosm. Compared to sterile microcosms, complete dye decolourization in natural microcosms showed microbial communities' significance in combating xenobiotic contamination. Proteobacteria dominated the water community, whereas Firmicutes dominated the sediment. AO7 exposure induced notable shifts in the structural composition of the bacterial community in both water and sediment. Niveispirillum exhibited a marked decrease, and Pseudomonas demonstrated a notable increase. The - 9.0 log2FC in Niveispirillum, a nitrogen-fixing bacterium, from 24.4% in the control to 0.1% post-treatment, may disrupt nutrient balance, plant growth, and ecosystem productivity. Conversely, elevated levels of Pseudomonas sp. resulting from azo dye exposure demonstrate its ability to tolerate and bioremediate organic pollutants, highlighting its resilience. Functional profiling via KEGG pathway analysis revealed differential expression patterns under AO7 stress. Specifically, valine, leucine, and isoleucine degradation pathways in water decreased by 52.2%, and cysteine and methionine metabolism ceased expression entirely, indicating reduced protein metabolism and nutrient bioavailability under dye exposure. Furthermore, in sediment, glutathione metabolism ceased, indicating increased oxidative stress following AO7 infusion. However, C5-branched dibasic acid metabolism and limonene and pinene degradation were uniquely expressed in sediment. Decreased methane metabolism exacerbates the effects of global warming on aquatic ecosystems. Further, ceased-butanoate metabolic pathways reflect the textile dye wastewater-induced adverse impact on ecological processes, such as organic matter decomposition, energy flow, nutrient cycling, and community dynamics that help maintain self-purification and ecological balance in river ecosystems. These findings underscore the critical need for more comprehensive environmental monitoring and management strategies to mitigate ecological risks posed by textile dyes in aquatic ecosystems, which remain unnoticed.

Design, construction and application of algae-bacteria synergistic system for treating wastewater

The wastewater treatment technology of algae-bacteria synergistic system (ABSS) is a promising technology which has the advantages of low energy consumption, good treatment effect and recyclable high-value products. In this treatment technology, the construction of an ABSS is a very important factor. At the same time, the emergence of some new technologies (such as microbial fuel cells and bio-carriers, etc.) has further enriched constructing the novel ABSS, which could improve the efficiency of wastewater treatment and the biomass harvesting rate. Thus, this review focuses on the construction of a novel ABSS in wastewater treatment in order to provide useful suggestions for the technology of wastewater treatment.

NiAlFe LTH /MoS2 p-n junction heterostructure composite as an effective visible-light-driven photocatalyst for enhanced degradation of organic dye under high alkaline conditions

Designing of an effectual heterostructure photocatalyst for catalytic organic pollutant exclusion has been the subject of rigorous research intended to resolve the related environmental aggravation. Fabricating p-n junctions is an effective strategy to promote electron-hole separation of semiconductor photocatalysts as well as enhance the organic toxin degradation performance. In this study, a series of n-type NiAlFe-layered triple hydroxide (LTH) loaded with various ratios of p-type MoS2 was synthesized for forming a heterostructure LTH/MoS2 (LMs) by an in situ hydrothermal strategy. The photocatalysts were characterized by XRD, SEM&EDX, TEM, FT-IR, XPS, as well as UV-vis DRS. The photoactivity of photocatalysts was tested by the degradation of Indigo Carmine (IC) dye. The optimized catalyst (LM1) degrades 100% of indigo dye in high alkaline pH under UV light for 100 min. Besides, the degradation rate of LM1 is 15 times higher than that of pristine NiAlFe-LTH. The enhanced photoactivity is attributed to the synergistic effect between NiAlFe-LTH and MoS2 as well as the p-n junction formation.

Microalgal and activated sludge processing for biodegradation of textile dyes

The textile industry contributes substantially to water pollution. To investigate bioremediation of dye-containing wastewater, the decolorization and biotransformation of three textile azo dyes, Red HE8B, Reactive Green 27, and Acid Blue 29, were considered using an integrated remediation approach involving the microalga Chlamydomonas mexicana and activated sludge (ACS). At a 5 mg L-1 dye concentration, using C. mexicana and ACS alone, decolorization percentages of 39%-64% and 52%-54%, respectively, were obtained. In comparison, decolorization percentages of 75%-79% were obtained using a consortium of C. mexicana and ACS. The same trend was observed for the decolorization of dyes at higher concentrations, but the potential for decolorization was low. The toxic azo dyes adversely affect the growth of microalgae and at high concentration 50 mg L-1 the growth rate inhibited to 50-60% as compared to the control. The natural textile wastewater was also treated with the same pattern and got promising results of decolorization (90%). Moreover, the removal of BOD (82%), COD (72%), TN (64%), and TP (63%) was observed with the consortium. The HPLC and GC-MS confirm dye biotransformation, revealing the emergence of new peaks and the generation of multiple metabolites with more superficial structures, such as N-hydroxy-aniline, naphthalene-1-ol, and sodium hydroxy naphthalene. This analysis demonstrates the potential of the C. mexicana and ACS consortium for efficient, eco-friendly bioremediation of textile azo dyes.

Enhanced adsorption of dye wastewater by low-temperature combined NaOH/urea pretreated hydrochar: Fabrication, performance, and mechanism

The highly stable biomass structure formed by cellulose, hemicellulose, and lignin results in incomplete conversion and carbonization under hydrothermal conditions. In this study, pretreated corn straw hydrochar (PCS-HC) was prepared using a low-temperature alkali/urea combination pretreatment method. The Mass loss rate of cellulose, hemicellulose, and lignin from pretreated biomass, as well as the effects of the pretreatment method on the physicochemical properties of PCS-HC and the adsorption performance of PCS-HC for alkaline dyes (rhodamine B and methylene blue), were investigated. The results showed that the low-temperature NaOH/urea pretreatment effectively disrupted the stable structure formed by cellulose, hemicellulose, and lignin. NaOH played a dominant role in solubilizing cellulose and the combination of low temperature and urea enhanced the ability of NaOH to remove cellulose, hemicellulose, and lignin. Compared to the untreated hydrochar, PCS-HC exhibited a rougher surface, a more abundant pore structure, and a larger specific surface area. The unpretreated hydrochar exhibited an adsorption capacity of 64.8% for rhodamine B and 66.32% for methylene blue. However, the removal of rhodamine B and methylene blue by PCS-BC increased to 89.12% and 90.71%, respectively, under the optimal pretreatment conditions. The PCS-HC exhibited a favorable adsorption capacity within the pH range of 6-9. However, the presence of co-existing anions such as Cl-, SO42-, CO32-, and NO3- hindered the adsorption capacity of PCS-HC. Among these anions, CO32- exhibited the highest level of inhibition. Chemisorption, including complexation, electrostatic attraction, and hydrogen bonding, were the primary mechanism for dye adsorption by PCS-HC. This study provides an efficient method for utilizing agricultural waste and treating dye wastewater.

Carbide lime as substrates to boost energy recuperation and dyestuff removal in constructed wetland-microbial fuel cell integrated with copper oxide/carbon cloth cathode

Methylene blue (MB) was regarded as a highly toxic and hazardous substance owing to its irreparable hazard and deplorable damage on the ecosystem and the human body. The treatment of this colorant wastewater appeared to be one of the towering challenges in wastewater treatment. In this study, a microbial fuel cell coupled with constructed wetland (CW-MFC) with effective MB elimination and its energy recuperation concurrently based on the incorporation of carbide lime as a substrate in a new copper oxide-loaded on carbon cloth (CuO/CC) cathode system was studied. The crucial influencing parameters were also delved, and the MB degradation and chemical oxygen demand (COD) removal efficiencies were correspondingly incremented by 97.3% and 89.1% with maximum power output up to 74.1 mW m-2 at optimal conditions (0.2 g L-1 carbide lime loading and 500 Ω external resistance). The carbide lime with high calcium ion content was greatly conducive for the enrichment of critical microorganism and metabolic activities. The relative abundances of functional bacteria including Proteobacteria and Actinobacteriota were vividly increased. Moreover, the impressive results obtained in printed ink wastewater treatment with a COD removal efficiency of 81.3% and a maximum power density of 58.2 mW m-2, which showcased the potential application of CW-MFC.

Bidirectional Enhancement of Nitrogen Removal by Indigenous Synergetic Microalgal-Bacterial Consortia in Harsh Low-C/N Wastewater

Conventional microalgal-bacterial consortia have limited capacity to treat low-C/N wastewater due to carbon limitation and single nitrogen (N) removal mode. In this work, indigenous synergetic microalgal-bacterial consortia with high N removal performance and bidirectional interaction were successful in treating rare earth tailing wastewaters with low-C/N. Ammonia removal reached 0.89 mg N L-1 h-1, 1.84-fold more efficient than a common microalgal-bacterial system. Metagenomics-based metabolic reconstruction revealed bidirectional microalgal-bacterial interactions. The presence of microalgae increased the abundance of bacterial N-related genes by 1.5- to 57-fold. Similarly, the presence of bacteria increased the abundance of microalgal N assimilation by 2.5- to 15.8-fold. Furthermore, nine bacterial species were isolated, and the bidirectional promotion of N removal by the microalgal-bacterial system was verified. The mechanism of microalgal N assimilation enhanced by indole-3-acetic acid was revealed. In addition, the bidirectional mode of the system ensured the scavenging of toxic byproducts from nitrate metabolism to maintain the stability of the system. Collectively, the bidirectional enhancement system of synergetic microalgae-bacteria was established as an effective N removal strategy to broaden the stable application of this system for the effective treatment of low C/N ratio wastewater.

Decolorization and degradation of various dyes and dye-containing wastewater treatment by electron beam radiation technology: An overview

The treatment of dye-containing wastewater generated from textile industries is still a challenge, and various technologies, including physical, chemical and biological ones have been used. In recent years, the ionizing radiation (usually including gamma ray generated by radionuclide, such as 60Co and 137Cs, and electron beam generated by electron accelerator) technology has received increasing attention for degrading refractory or toxic organic pollutants in wastewater because of its unique advantages, such as no chemical additives, fast reaction rate, strong degradation capacity, high efficiency, flexibility, controllability. Compared to the conventional wastewater treatment processes, ionizing radiation technology, as a disruptive wastewater treatment technology, is more efficient for the decolorization and degradation of dyes and the treatment of dye-containing wastewater. In this paper, the recent advances in the treatment of dye-containing wastewater by ionizing radiation, in particular by electron beam (EB) radiation were summarized and analyzed, focusing on the decolorization and degradation of various dyes. Firstly, the formation of various reactive species induced by radiation and their interactions with dye molecules, as well as the influencing factors on the removal efficiency of dyes were discussed. Secondly, the researches on the treating dye-containing wastewater by electron beam radiation technology were systematically reviewed. Then, the decolorization and degradation mechanisms by electron beam radiation were further discussed in detail. And the integrated processes that would contribute to the advancement of this technology in practical applications were examined. More importantly, the recent advances of electron beam radiation technology from laboratory to application were reviewed, especially successful operation of dye-containing wastewater treatment facilities in China. And eventually, current challenges, future research directions, and outlooks of electron beam radiation technology were proposed for further advancing this technology for the sustainable development of water resources.

Effect of different concentrations of gibberellins on attenuation of nutrient and antibiotics from aquaculture wastewater using microalgae-bacteria-fungi consortia system

This study assessed the effect of gibberellins (GAs) concentrations on antibiotic and nutrient removal using diverse microalgal-bacterial-fungal consortia. Five systems (Chlorella vulgaris, T1; C. vulgaris + S395-2 + Clonostachys rosea, T2; C. vulgaris + S395-2 + Ganoderma lucidum, T3; C. vulgaris + S395-2 + Pleurotus pulmonarius, T4; and C. vulgaris + S395-2, T5) were established, and optimal conditions and effective symbiosis were applied to improve antibiotic and nutrient removal. Consortium growth was T2 > T3 > T5 > T4 > T1, while GA impact ranked 50 mg L-1 > 20 mg L-1 > 80 mg L-1 > 0 mg L-1. After 7 days at 50 mg L-1 GAs, total nitrogen (TN), NH4-N, NO3-N, and total phosphorous (TP) removal reached 85.97 %, 78.08 %, 86.59 %, and 94.39 %, respectively. Florfenicol, oxytetracycline hydrochloride, ofloxacin, and sulfamethoxazole removal efficiencies were 67.77 %, 98.29 %, 90.47 %, and 94.92 %, respectively. These findings highlight GAs' significant role in enhancing antibiotic and nutrient removal.

Advances from conventional to biochar enhanced biotreatment of dyeing wastewater: A critical review

DW (Dyeing wastewater) contains a large amount of dye organic compounds. A considerable proportion of dye itself or its intermediate products generated during wastewater treatment process exhibits CMR (Carcinogenic/Mutagenic/Toxic to Reproduction) toxicity. Compared with physicochemical methods, biological treatment is advantageous in terms of operating costs and greenhouse gas emissions, and has become the indispensable mainstream technology for DW treatment. This article reviews the adsorption and degradation mechanisms of dye organic compounds in wastewater and analyzed different biological processes, ranging from traditional methods to processes enhanced by biochar (BC). For traditional biological processes, microbial characteristics and communities were discussed, as well as the removal efficiency of different bioreactors. BC has adsorption and redox electron mediated effects, and coupling with biological treatment can further enhance the process of biosorption and degradation. Although BC coupled biological treatment shows promising dye removal, further research is still needed to optimize the treatment process, especially in terms of technical and economic competitiveness.

Responses of Chlorella vulgaris to the native bacteria in real wastewater: Improvement in wastewater treatment and lipid production

Alga-bacterium interaction can improve wastewater treatment efficiency. To unravel the mystery of the interaction between microalgae and bacteria in wastewater, mono-cultures and co-cultures of Chlorella vulgaris and native bacteria in pretreated biochemical wastewater from landfill leachate were investigated. The results showed that the microalgae selected dominant commensal bacteria, creating a further reduction in species richness for the co-culture, which in turn aids in the dominant commensal bacteria's survival, thereby enhancing algal and bacterial metabolic activity. Strikingly, the lipid productivity of Chlorella in co-culture - namely 41.5 mg/L·d - was 1.4 times higher than in algal monoculture. Additionally, pollutant removal was enhanced in co-cultures, attributed to the bacterial community associated with pollutants' degradation. Furthermore, this study provides an important advance towards observations on the migration and transformation pathways of nutrients and metals, and bridges the gap in algal-bacterial synergistic mechanisms in real wastewater, laying the theoretical foundation for improving wastewater treatment.

Advances in Polyoxometalates as Electron Mediators for Photocatalytic Dye Degradation

The increasing concerns over the environment and the growing demand for sustainable water treatment technologies have sparked substantial interest in the field of photocatalytic dye removal. Polyoxometalates (POMs), known for their intricate metal-oxygen anion clusters, have received considerable attention due to their versatile structures, compositions, and efficient facilitation of photo-induced electron transfers. This paper provides an overview of the ongoing research progress in the realm of photocatalytic dye degradation utilizing POMs and their derivatives. The details encompass the compositions of catalysts, catalytic efficacy, and light absorption propensities, and the photocatalytic mechanisms inherent to POM-based materials for dye degradation are exhaustively expounded upon. This review not only contributes to a better understanding of the potential of POM-based materials in photocatalytic dye degradation, but also presents the advancements and future prospects in this domain of environmental remediation.

Impact of Reactive Oxygen Species Scavenging on the Intermediate Production of Anthracene and Anthraquinone in Fresh versus Saltwater Environments

While salinity can alter the photodegradation of hydrophobic organic compounds (HOCs), the cause of their altered kinetics in seawater is not well understood. Because HOC intermediate photoproducts are often more toxic than their parent compounds, characterizing the generation of intermediates in saline environments is needed to accurately predict their health effects. The present study investigated the influence of salinity on the generation of anthraquinone through the photolysis of anthracene and the generation of anthrone and 1-hydroxyanthraquinone from the photolysis of anthraquinone as well as their reactivities with hydroxyl radicals. This was conducted by measuring the photolysis rates of anthracene and anthraquinone and characterizing their product formation in buffered deionized water, artificial seawater, individual seawater halides (bromide, chloride, and iodide), dimethyl sulfoxide, furfuryl alcohol, and solutions of hydrogen peroxide. Salinity enhanced the persistence of anthraquinone by a factor >10 and altered its product formation, including the generation of the suspected carcinogen 1-hydroxyanthraquinone. In part, this was attributed to reactive oxygen species (ROS) scavenging by the seawater constituents chloride and bromide. In addition, anthraquinone and its hydroxylated products were found to be moderately to highly reactive with hydroxyl radicals, further illustrating their tendency to react with ROS in aqueous environments. The present study emphasizes the importance of considering the effects of salinity on organic contaminant degradation; it can significantly enhance the persistence of HOCs and alter their intermediate formation, subsequently impacting chemical exposure times and potential toxic effects on estuarine/marine organisms. Environ Toxicol Chem 2023;42:1721-1729. © 2023 SETAC.

Preparation, Modification, and Application of Biochar in the Printing Field: A Review

Biochar is a solid material enriched with carbon produced by the thermal transformation of organic raw materials under anoxic or anaerobic conditions. It not only has various environmental benefits including reducing greenhouse gas emissions, improving soil fertility, and sequestering atmospheric carbon, but also has the advantages of abundant precursors, low cost, and wide potential applications, thus gaining widespread attention. In recent years, researchers have been exploring new biomass precursors, improving and developing new preparation methods, and searching for more high-value and meaningful applications. Biochar has been extensively researched and utilized in many fields, and recently, it has also shown good industrial application prospects and potential application value in the printing field. In such a context, this article summarizes the typical preparation and modification methods of biochar, and also reviews its application in the printing field, to provide a reference for future work.

Metagenomic analysis of ready biodegradability tests to ascertain the relationship between microbiota and the biodegradability of test chemicals

Ready biodegradability tests conducted in accordance with the Organisation for Economic Co-operation and Development guidelines (test 301C or test 301F) are performed using activated sludge (AS) prepared by the Chemicals Evaluation and Research Institute (AS-CERI) or that taken from a sewage treatment plant (AS-STP). It had been reported that AS-CERI had lower activity than AS-STP in biodegrading test chemicals, and that biodegradation was accelerated by increasing the volume of the test medium. However, these phenomena have not been clarified from the perspective of the microbiota. In this study, using metagenomic analysis, we first showed that the microbiota of AS-CERI was biased in its distribution of phyla, less diverse, and had greater lot-to-lot variability than that of AS-STP. Second, after cultivation for a long period of time, the microbiota of AS-STP and AS-CERI became more similar to each other in terms of community structure. Third, determining degraders of test substances when each substance was actively biodegraded was found to be an effective approach. Finally, we clarified experimentally that a large volume of test medium increased the number of species that could degrade test substances in the condition where the initial concentrations of each substance and AS-STP were kept constant.

New biochemistry in the Rhodanese-phosphatase superfamily: emerging roles in diverse metabolic processes, nucleic acid modifications, and biological conflicts

The protein-tyrosine/dual-specificity phosphatases and rhodanese domains constitute a sprawling superfamily of Rossmannoid domains that use a conserved active site with a cysteine to catalyze a range of phosphate-transfer, thiotransfer, selenotransfer and redox activities. While these enzymes have been extensively studied in the context of protein/lipid head group dephosphorylation and various thiotransfer reactions, their overall diversity and catalytic potential remain poorly understood. Using comparative genomics and sequence/structure analysis, we comprehensively investigate and develop a natural classification for this superfamily. As a result, we identified several novel clades, both those which retain the catalytic cysteine and those where a distinct active site has emerged in the same location (e.g. diphthine synthase-like methylases and RNA 2' OH ribosyl phosphate transferases). We also present evidence that the superfamily has a wider range of catalytic capabilities than previously known, including a set of parallel activities operating on various sugar/sugar alcohol groups in the context of NAD+-derivatives and RNA termini, and potential phosphate transfer activities involving sugars and nucleotides. We show that such activities are particularly expanded in the RapZ-C-DUF488-DUF4326 clade, defined here for the first time. Some enzymes from this clade are predicted to catalyze novel DNA-end processing activities as part of nucleic-acid-modifying systems that are likely to function in biological conflicts between viruses and their hosts.

Critical Review on Sustainability in Denim: A Step toward Sustainable Production and Consumption of Denim

The exponential development in knowledge on the health and environmental concerns linked to conventional denim processing is directly responsible for the continuous increase in demand for the exploitation of sustainable denim. Research is essential to explore alternative methods to reduce the environmental impact caused by these industries. This review examines the many sustainable ways to produce denim, keeping in mind the problems that the denim industry is now facing in finding alternatives to conventional manufacturing practices. The most current advancements in environmentally friendly dyeing techniques for denim have been extensively discussed. These processes include the production of indigo from bacteria as well as different dyeing processes, such as digital spray, microbially assisted dyeing, and foam dyeing denim with indigo. In addition, this review covers the many environmentally friendly finishing methods for denim garments, such as ozone fading, e-flow, enzyme-based bleaching, water, laser fading, and so on. Finally, it is described how the chemical and mechanical processes used to finish denim might affect the amount of microplastics and microfibers released from the denim garment during domestic washing. As a result, the content presented in this review aims to address the importance of sustainable denim processing, that is, something that can be rethought, reevaluated, renewed, and restructured within the scope of conventional denim processes, while taking eco-responsible solutions for increased environmental sustainability into account.

Mechanisms and application of microalgae on removing emerging contaminants from wastewater: A review

This study reviews the development of the ability of microalgae to remove emerging contaminants (ECs) from wastewater. Contaminant removal by microalgae-based systems (MBSs) includes biosorption, bioaccumulation, biodegradation, photolysis, hydrolysis, and volatilization. Usually, the existence of ECs can inhibit microalgae growth and reduce their removal ability. Therefore, three methods (acclimation, co-metabolism, and algal-bacterial consortia) are proposed in this paper to improve the removal performance of ECs by microalgae. Finally, due to the high removal performance of contaminants from wastewater by algal-bacterial consortia systems, three kinds of algal-bacterial consortia applications (algal-bacterial activatedsludge, algal-bacterial biofilm reactor, and algal-bacterial constructed wetland system) are recommended in this paper. These applications are promising for ECs removal. But most of them are still in their infancy, and limited research has been conducted on operational mechanisms and removal processes. Extra research is needed to clarify the applicability and cost-effectiveness of hybrid processes.

A review on the treatment of dyes in printing and dyeing wastewater by plant biomass carbon

Printing and dyeing wastewater (PDW) has characteristics of large amount of water, elevated content of residual dyes, poor biodegradability, high alkalinity and large change of water quality, making its treatment difficult. Development of efficient and economic PDW treatment technology has gained considerable interest in the field of environmental protection. Use of plant biomass carbon (PBC) for the adsorption of dyes is a feasible and economical technology. This review summarizes current literature discussing the preparation method and physicochemical characteristics of PBC prepared from different plant species, the effect of PBC on the removal of dyes, influencing factors affecting the removal, and relevant adsorption models. The shortcomings of current research and the direction of future research are also pointed out in the review.

Granular indigenous microalgal-bacterial consortium for wastewater treatment: Establishment strategy, functional microorganism, nutrient removal, and influencing factor

Granular indigenous microalgal-bacterial consortium (G-IMBC) system integrates the advantages of the MBC and granular activated sludge technologies, also with superior microalgal wastewater adaptation capacity. In this review, the concept of IMBC was firstly described, followed by its establishment and acclimation strategies. Characteristics and advantages of G-IMBC system compared to other IMBC systems (i.e., attached and floc IMBC systems) were then introduced. Moreover, the involved functional microorganisms and their interactions, as well as nutrient removal mechanisms were systematically and critically reviewed. Finally, the influencing factors including wastewater characteristics and operation factors were discussed. This study aims to provide a comprehensive up-to-date summary of the G-IMBC system for sustainable wastewater treatment.

Emerging biological wastewater treatment using microalgal-bacterial granules: A review

Aiming at deepening the understanding of the formation and evolution of emerging microalgal-bacterial granule (MBG)-based wastewater treatment systems, the recent advances regarding the formation processes, transfer phenomena, innovative bioreactors development and wastewater treatment performance of MBG-based systems are comprehensively reviewed in this work. Particularly, the successful establishments of MBG-based systems with various inocula are summarized. Besides, as the indispensable factors for biochemical reactions in MBGs, the light and substrates (organic matters, inorganic nutrients, etc) need to undergo complicated and multi-scale transfer processes before being assimilated by microorganisms within MBGs. Therefore, the involved transfer phenomena and mechanisms in MBG-based bioreactors are critically discussed. Subsequently, some recent advances of MBG-based bioreactors, the application of MBG-based systems in treating various synthetic and real wastewater, and the future development directions are discussed. In short, this review helps in promoting the development of MBG-based systems by presenting current research status and future perspectives.

A comprehensive review on the use of algal-bacterial systems for wastewater treatment with emphasis on nutrient and micropollutant removal

The scarcity of water resources and environmental pollution have highlighted the need for sustainable wastewater treatment. Existing conventional treatment systems are energy-intensive and not always able to meet stringent disposal standards. Recently, algal-bacterial systems have emerged as environmentally friendly sustainable processes for wastewater treatment and resource recovery. The algal-bacterial systems work on the principle of the symbiotic relationship between algae and bacteria. This paper comprehensively discusses the most recent studies on algal-bacterial systems for wastewater treatment, factors affecting the treatment, and aspects of resource recovery from the biomass. The algal-bacterial interaction includes cell-to-cell communication, substrate exchange, and horizontal gene transfer. The quorum sensing (QS) molecules and their effects on algal-bacterial interactions are briefly discussed. The effect of the factors such as pH, temperature, C/N/P ratio, light intensity, and external aeration on the algal-bacterial systems have been discussed. An overview of the modeling aspects of algal-bacterial systems has been provided. The algal-bacterial systems have the potential for removing micropollutants because of the diverse possible interactions between algae-bacteria. The removal mechanisms of micropollutants - sorption, biodegradation, and photodegradation, have been reviewed. The harvesting methods and resource recovery aspects have been presented. The major challenges associated with algal-bacterial systems for real scale implementation and future perspectives have been discussed. Integrating wastewater treatment with the algal biorefinery concept reduces the overall waste component in a wastewater treatment system by converting the biomass into a useful product, resulting in a sustainable system that contributes to the circular bioeconomy.