Coupling photoelectrochemical and electrochemical strategies in one probe electrode: Toward sensitive and reliable dual-signal bioassay for uracil-DNA glycosylase activity

Photoelectrochemical and fluorescent dual-mode sensitive detection of circulating tumor cells based on aptamer DNA-linked CdTe QDs/Bi2MoO6/CdS "double Z-scheme" system

Herein, a novel dual-mode biosensor integrating photoelectrochemical (PEC) and fluorescence (FL) sensing detection was developed for circulating tumor cells (CTCs) based on aptamer DNA-linked CdTe QDs (Apt-CdTe QDs)/Bi2MoO6/CdS "dual Z-scheme" sensing system. Apt-CdTe QDs were assembled on FTO/CdS/Bi2MoO6/cDNA electrode through hybridization with cDNA, resulting in the formation of a double Z-scheme CdS/Bi2MoO6/CdTe heterostructure that significantly enhanced the separation of photo-generated charge carriers, thereby improving photocatalytic efficiency. Upon the presence of MCF-7 cells, Apt-QDs were captured and subsequently released from the captured electrode, leading to a decrease in photocurrent and an increase in fluorescence intensity, thus enabling effective PEC-FL dual-mode detection. The detection of CTCs exhibited a linear relationship within the concentration range from 50 to 100000 cells mL-1 with limit of detection of 1 cell mL-1 in both PEC and FL modes. This approach effectively corrected systematic errors, improved detection accuracy and sensitivity, and held great potential in the clinical detection of CTCs.

Fluorescent strategy for detection of uracil-DNA glycosylase activity based on isothermal amplification triggered by ligase

Uracil-DNA glycosylase (UDG) plays a key role in the base repair system, and detecting its enzymatic activity is crucial for early disease diagnosis. A rapid method for detecting UDG was developed, utilizing amplification initiated by a ligation reaction. A DNA probe modified with uracil was utilized to ligate two free DNA strands to form a newly generated DNA strand. This triggers a nicking enzyme-assisted amplification reaction, resulting in the production of single-stranded DNA (ssDNA). Then, the amplified ssDNA triggered the molecular beacons to emit fluorescence. However, the addition of UDG results in the removal of uracil from the DNA probe strand, leaving abasic site (AP site). After heat denaturation, this site was destroyed, preventing subsequent ligation or amplification reactions, resulting in the absence of fluorescence. The findings of our study indicate that the addition of UDG at concentrations exceeding 0.5 U/mL resulted in complete suppression of fluorescence intensity, reaching a value of 0. Conversely, in the absence of the UDG enzyme or upon the addition of other enzymes and proteins such as HAAG, EndoIV and BSA, the fluorescence intensity of the system remains unaffected, achieving 100 % intensity within 5-20 min. This study presents a rapid method for assessing UDG activity that could be valuable for early disease diagnosis in the future.

Polyacrylamide-incorporated copper electrodes for electrochemical-colorimetric dual-mode detection of H2O2 released from tomato leaves

Hydrogen peroxide (H2O2) plays a key role in a diverse array of cellular signaling pathways, which is closely related to plant health and physiological status. The accurate and efficient monitoring of H2O2 in living plant cells has attracted enormous interest. Herein, we developed an electrochemical-colorimetric dual-mode sensor based on the peroxidase-like activity of a polyacrylamide (PAM) -modified copper electrode (Cu-PAM), allowing for the in situ detection of H2O2 released from tomato leaves. The co-electrodeposition of unique combination of Cu and polyacrylamide, as well as the active site structure of Cu-centered peroxidases, can enhance adsorption performance by the hydrogen bonds between PAM with H2O2, which exhibited excellent electrochemical performance with a low limit of detection (LOD) of 0.0167 mM and a detection range of 0.05-25.31 mM. Meanwhile, a colorimetric signal output of the sensor that can be quantified from 1 μM to 70 μM with a LOD value of 0.33 μM. This work demonstrates a huge potential application prospect of the polyacrylamide-modified copper in the field of biosensors.

Real-Time Dynamic Tracking of Multiple Base Excision Repair Enzymes in Living Cells

Simultaneous in situ monitoring of base excision repair (BER) correlated enzymes like apurinic/apyrimidinic endonuclease 1 (APE1) and flap endonuclease 1 (FEN1) in living cells offers valuable insights into their roles in disease development and cytotoxicity caused by pollutants, but comprehensive analysis is currently hindered by diverse enzyme functions and limited methods. In this study, we developed a dual-activatable DNA fluorescent probe (AP-FLAP) to simultaneously visualize APE1 and FEN1 activities, revealing the BER-related DNA damage caused by various environmental pollutants within living cells. The AP-FLAP probe was designed by ingeniously integrating a dumbbell structure containing a 5' flap and a hairpin structure containing AP sites into a single oligonucleotide probe. APE1 specifically hydrolyzed the AP sites, releasing a 5-carboxy-X-rhodamine (ROX) signal, while FEN1 recognized and cleaved the 5' flap, releasing a 6-carboxyfluorescein (FAM) signal. The probe allowed for independent determination of APE1 and FEN1 activities with good specificity and sensitivity. Subsequently, we applied the AP-FLAP probe to investigate base damage induced by 1-methylphenanthrene (1-MP) and 6-chlorobenzo[a]pyrene (6-Cl-BaP) in human umbilical vein endothelial cells (HUVECs). Significant base damage by 1-MP and 6-Cl-BaP exposure was revealed, with a positive correlation of damage degree with different exposure concentrations from 0.1 to 100 μM. Notably, 6-Cl-BaP caused significant damage even at 0.1 μM, in a concentration-dependent manner. Our work provides a powerful tool for elucidating BER molecular mechanisms and DNA damage repair under environmental exposure and opens new avenues for developing multifunctional nucleic acid probes for a wide range of applications in chemical biology and biomedical research.

Sensitive electrochemical determination of hydrogen peroxide in milk and water utilizing AgNPs@Sn MOF nanozyme

The detection of H2O2 by a non-enzymatic electrochemical sensor is demonstrated using the deposition of silver nanoparticles on a tin metal-organic framework (AgNPs@Sn MOF). Coupling Sn MOF with the AgNPs significantly amplifies the electro-analytical performance due to the higher porosity, synergistic effect, and enhanced active surface area for the analyte interaction, entailing the faster interfacial transfer of electrons. The synthesized material was explored using different characterization techniques, revealing the surface morphology, crystalline size and nature, and availability of different functional groups. Additionally, AgNPs@Sn MOF nanozyme effectively oxidizes 3,3',5,5'-tetramethylbenzidine (TMB) to oxidized-TMB(oxTMB) and o-phenylenediamine (OPD) to oxidized-OPD(oxOPD) product along with the generation of •OH radicals posing an excellent peroxidase-like activity in an acidic medium. Under the optimized experimental conditions, the colorimetric detection and the electrochemical sensing of H2O2 are facilitated with the LOD of 70 nM in the linear range 0.1-50 µM and 37 nM in the linear range of 0.1-30 µM, respectively. Notably, the practical utility of the sensor was demonstrated by sensing H2O2 in a real sample, achieving a recovery range of 97-106% and 96-106% for milk and water, respectively.

DNA polymerase mediated CRISPR/Cas12a trans-cleavage for dual-mode quantification of uracil DNA glycosylase activity

Since an unusual expression of uracil-DNA glycosylase (UDG) is often associated with the pathogenesis of numerous disorders, the detection of UDG activity is regarded as a promising application in disease diagnosis. Here, we develop a DNA polymerase-mediated CRISPR/Cas12a trans cleavage strategy, which can achieve dual-mode determination of UDG activity. By introducing a hairpin DNA probe containing a single uracil base, the probe undergoes specific cleavage and elongation under the existence of UDG only, thus activating the trans cleavage of ssDNA regardless of its length and sequence. To accommodate different detection modes, the ssDNA was further modified by fluorophore-quencher pairs or designed for connecting magnetic microparticles (MMPs) and polystyrene microparticles (PMPs). Finally, the UDG activity is quantified by fluorescence signal and microparticle accumulation length on a microfluidic chip visible to the naked eye. This strategy provides a detectable minimum UDG concentration of 0.00047 U/mL for fluorescent mode and 0.0048 U/mL for microfluidic mode. Furthermore, we performed the UDG inhibition test and detected UDG activity in cell lysates, suggesting its potential for inhibitor screening and detection of UDG in biological samples.

Enhanced Anti-Interference Photoelectrochemical DNA Bioassay: Grafting a Peptide-Conjugated Hairpin DNA Probe on a COF-Based Photocathode

Precise and sensitive analysis of specific DNA in actual human bodily fluids is crucial for the early diagnosis of major diseases and for a deeper understanding of DNA functions. Herein, by grafting a peptide-conjugated hairpin DNA probe to a covalent organic framework (COF)-based photocathode, a robust anti-interference photoelectrochemical (PEC) DNA bioassay was explored, which could specifically resist potential interference from nonspecific proteins and reducing species. Human immunodeficiency virus (HIV) DNA was used as the target DNA (tDNA) for the PEC DNA bioassay. The vinyl-functionalized COF (COF-V) was modified with meso-tetra(4-carboxyphenyl)-porphine (TCPP) and polydopamine (PDA) to fabricate a PDA/TCPP/COF-V photocathode, which served as the photocurrent signal transducer. Toward the unconventional recognition element, a hairpin DNA probe (hDNA) was efficiently linked with a linear zwitterionic peptide (LZP) to form the LZP-hDNA bioconjugate, which was then grafted onto the COF-based photocathode. The grafting of the LZP generated a sturdy anti-interference interface on the signal transducer. For tDNA probing, AgInS2 (AIS) quantum dots acted as signal quenchers, marked on signaling DNA (sDNA) to obtain AIS-sDNA labeling, and a striking drop in the photocurrent signal was achieved through λ-exonuclease (λ-Exo)-aided target recycling. This novel peptide-conjugated hairpin DNA probe endowed the PEC DNA bioassay with an impressive anti-interference property without requiring tedious steps. By combining the excellent photoelectric properties of the COF-based photocathode with an effective signaling strategy, accurate and sensitive results for tDNA probing were achieved.

Advanced Dual-Mode Microfluidic Sensing Platform Based on Amphiphilic Polymer-Capped Perovskite Nanozymes Induced Photoelectrochemical Signal Amplification and Fluorescence Emission

A novel dual-mode microfluidic sensing platform integrating photoelectrochemical (PEC) and fluorescence (FL) sensors was developed for the sensitive monitoring of heart fatty acid binding protein (h-FABP). First, BiVO4/AgInS2 (BVAIS) composites with excellent photoelectric activity were synthesized as sensing matrices. The BVAIS heterojunction with a well-matched internal energy level structure provided a stable photocurrent. Second, an innovative signal amplification strategy based on octylamine-modified poly(acrylic acid) (OPA)-capped CsPbBr3 (OPCB) nanocrystals (NCs) with excellent catalytic activity and fluorescence property was proposed. On the OPCB nanozyme possessing ascorbate oxidase-like catalytic activity could catalyze the oxidation of ascorbic acid, which achieved quenching of the photocurrent signals by competitively consuming the electron donor. On the other hand, the OPCB NCs that overcame the water stability defect processed good luminescence performance and were able to produce obvious FL signals. Mutually verified dual-response signals effectively enhance the precision of test outcomes and avoid false-positive or false-negative results. Finally, the constructed microfluidic sensing platform realized sensitive detection of h-FABP in the linear range of 0.0001-150 ng/mL (PEC mode) and 0.001-150 ng/mL (FL mode), with detection limits of 36 fg/mL and 0.32 pg/mL, respectively. The present work provided a new perspective for designing an efficient dual-mode sensing strategy to achieve sensitive detection of disease markers.

Ultra-sensitive detection of norovirus using a three-in-one CRISPR platform based on a DNA hydrogel and composite functional nanomaterials

The ultrasensitive sensor with three optical response mechanisms was proposed for the determination of trace amounts of norovirus using a 3-in-1 GCSNAs (a gap-containing spherical nucleic acid nanoparticles) probe. A simple and highly sensitive three-mode biosensor with Raman, colorimetric, and fluorescence functions was proposed and implemented using the GCSNAs probe and a DNA hydrogel for norovirus detection. When the virus exists, the trans-cleavage activity of CRISPR-Cas12a was activated by double-stranded dsDNA (dsDNA) generated by reverse transcription and recombinase polymerase isothermal amplification (RT-RPA) to degrade the DNA hydrogel/GCSNA composition and release the three-in-one (3-in-1) probe-GCSNA, realising the triple ultrasensitive detection of norovirus. The colorimetric sensing mode allows for semi-quantitative on-site detection, which is visible to the naked eye and the quantitative detection can be achieved by conducting grayscale analysis using the "Colour Grab" function of a smartphone. This new triple sensor achieved the successful quantification of norovirus at concentrations as low as the femtomolar scale with an excellent selectivity and accuracy. Considering the colorimetric properties of rolling circle amplification (RCA)-based DNA hydrogels and GCSNAs, the proposed method has a broad application prospect in virus on-site detection in food. It should be applicable for virus detection in a wide range of fields such, as environmental analysis, medical diagnosis, and food safety. It is anticipated that this mechanism will open new avenues for the development of multimodal analyses and multifunctional sensing platforms for various applications. We anticipate that this sensing mechanism will open up a new way for the development of food safety detection.

Hybrid chain reaction-based and Au/Bi4NbO8Cl/In2S3 layer-by-layer assembled dual-mode photoelectrochemical-electrochemical aptasensor for the detection of Salmonella enteritidis

Salmonella enteritidis (SE) is a food-borne pathogens that can cause acute gastroenteritis. With the increasing social attention to food safety, the detection method of SE has attracted wide attention. In response to the demand for efficient detection methods of SE, this study constructed a novel dual-mode photoelectrochemical-electrochemical (PEC-EC) aptamer-based biosensor. The sensor was constructed using Bi4NbO8Cl/In2S3 heterojunction as the electrode substrate material, the hybridization chain reaction (HCR) and dye sensitization were used as the signal amplification strategies. Bi4NbO8Cl/In2S3 heterojunction could provide an excellent initial photocurrent response for the sensing platform, and the HCR was opened by the end of complementary DNA (cDNA) and generated an ultra-long DNA double-stranded (dsDNA) "super structure" on the surface of the electrode, which could be embedded with a large number of methylene blue (MB) as the bifunctional probes. Thus, dual-mode output was achieved via the PEC and EC activity of MB. Under the optimized conditions, the PEC and EC signal responses of the system were linear to the logarithm of SE concentration in a range from 1.5 × 102 CFU/mL to 1.5 × 107 CFU/mL. The detection limits were found to be 12.9 CFU/mL and 12.3 CFU/mL using the PEC and EC methods, respectively. The constructed dual-mode biosensor exhibited good performance for real sample analysis, and demonstrated great application potential in the field of SE rapid detection. Moreover, this dual-mode detection strategy provided more accurate and reliable results than the single-mode output.

A colorimetric/electrochemical microfluidic biosensor using target-triggered DNA hydrogels for organophosphorus detection

Organophosphorus compounds are widely distributed and highly toxic to the environment and living organisms. The current detection of organophosphorus compounds is based on a single-mode method, which makes it challenging to achieve good portability, accuracy, and sensitivity simultaneously. This study designed a multifunctional microfluidic chip to develop a dual-mode biosensor employing a DNA hydrogel as a carrier and aptamers as recognition probes for the colorimetric/electrochemical detection of malathion, an organophosphorus compound. The biosensor balanced portability and stability by combining a microfluidic chip and target-triggered DNA hydrogel-sensing technologies. Moreover, the biosensor based on target-triggered DNA hydrogel modified microfluidic developed in this study exhibited a dual-mode response to malathion, providing both colorimetric and electrochemical signals. The colorimetric mode enables rapid visualization and qualitative detection and, when combined with a smartphone, allows on-site quantitative analysis with a detection limit of 56 nM. The electrochemical mode offers a broad linear range (0.01-3000 μM) and high sensitivity (a limit of detection of 5 nM). The two modes could validate each other and improve the accuracy of detection. The colorimetric/electrochemical dual-mode biosensor based on target-triggered DNA hydrogel modified microfluidic chip offers a portable, simple, accurate, and sensitive strategy for detecting harmful environmental and food substances.

Recent research progress in tetrodotoxin detection and quantitative analysis methods

Tetrodotoxin (TTX) is a highly potent and widely distributed ion-channel marine neurotoxin; it has no specific antidote and poses a great risk to human health. Therefore, detecting and quantifying TTX to effectively implement prevention strategies is important for food safety. The development of novel and highly sensitive, highly specific, rapid, and simple techniques for trace TTX detection has attracted widespread attention. This review summarizes the latest advances in the detection and quantitative analysis of TTX, covering detection methods based on biological and cellular sensors, immunoassays and immunosensors, aptamers, and liquid chromatography-mass spectrometry. It further discusses the advantages and applications of various detection technologies developed for TTX and focuses on the frontier areas and development directions of TTX detection, providing relevant information for further investigations.

Dual-mode photoelectrochemical radar based on CdS quantum dot and Ce-MOF for detection of low-abundance disease-associated proteins

Herein, we developed a convenient and versatile dual-mode electrochemiluminescence (ECL) and photoelectrochemistry (PEC) sensing radar for the detection of Prostate-specific antigen (PSA), which has important implications for detection of low-abundance disease-associated proteins. Cerium-based metal-organic framework (Ce-MOFs) were firstly modified on the electrode, showing well ECL and PEC property. In particular, a unique multifunctional Au@CdS quantum dots (QDs) probe loaded numerous QDs and antibody was fabricated, not only displaying strong ECL and PEC signals, but also having specific recognition to PSA. After the signal probe was linked to the electrode by immune reaction, much amplified signals of ECL and PEC were generated for double-mode detection of PSA. Therefore, this work proposed a multifunctional Au@CdS QDs signal probe with excellent ECL and PEC performance, and developed an ultrasensitive photoelectric biosensing platform for dual-mode detection, which provides an effective method for health monitoring of cancer patients.

A colorimetric and SERS dual-mode aptasensor for the detection of Shiga toxin type II based on Mn/Fe-MIL(53)@AuNSs

Shiga toxin type II (Stx2), the major virulence component of enterohemorrhagic Escherichia coli, is strongly associated with the life-threatening hemolytic uremic syndrome thus posing a substantial risk to food safety and human health. In this work, a dual-mode aptasensor with colorimetric and surface-enhanced Raman scattering was developed for Stx2 specific detection based on noble metal nanoparticles and Raman reporter loaded metal-organic framework (Mn/Fe-MIL(53)@AuNSs-MBA). The Mn/Fe-MIL(53)@AuNSs could catalyze the H2O2-mediated oxidation of 3,3',5,5'-tetramethylbenzidine (TMB), thereby enabling visual detection. Meanwhile, the SERS signal from MBA can be enhanced by the decorated AuNSs. Under optimal conditions, a linear range of 0.05-500 ng/mL with limit of detection (LOD) of 26 pg/mL was achieved in colorimetric mode and a linear range of 5-1000 ng/mL with LOD of 0.82 ng/mL in SERS mode, in which the dual-mode results complement each other, widening the linear range, increasing the accuracy and reliability of the detection. The method was further applied to the detection of Stx2 in milk with average recovery of 101.1 %, demonstrating its superior potential for bacterial toxin monitoring.

SERS-electrochemical dual-mode detection of microRNA on same interface assisted by exonuclease III signal transformation

Dual-mode sensing has attracted more attentions which provide more accurate and reliable approach of cancer-related biomarkers. Herein, we developed a novel SERS/electrochemical dual-mode biosensor for miRNA 21 detection based on Exo III-assisted signal transformation. Firstly, the Au NPs were deposited on electrode as SERS substrate and Mn3O4/S4(DNA signal strand) was modified on Au NPs/S5 by the DNA strands S5-S4 pairing principle as hydrogen peroxide catalyst, leading to an obviously high DPV electrical signal without Raman signal. Subsequently, the presence of miRNA 21 will activate the Mn3O4/S4 to be decomposed under exonuclease III-assisted process, then the S3' chains modified with Raman molecular Cy3(Cy3-S3') is continuously connected to the Au NPs/S5 by DNA stands S5-S3' pairing principle, leading to the Raman signal response and DPV signal reduction. The biosensor shows good linear calibration curves of both SERS and electrochemical sensing modes with the detection limit of 3.98 × 10-3 nM and 6.89 × 10-5 nM, respectively. This work finds an ingenious mode for dual detection of microRNA on a same interface, which opens a new strategy for SERS and electrochemical analysis.

Triple-Mode Sensor Coupled by Photoelectrochemical, Electrochromic, and Spectral Signals for Sensitive Visualized Detection of Nonylphenol

Conventional photoelectrochemical (PEC) biosensors suffer from the difficulty of visualizing rapid detection and limited accuracy due to a single-signal output. Here, we develop a PEC, electrochromic (EC), and spectral (ST) triple-mode platform for the sensitive visualized detection of nonylphenol (NP). First, the reasonably stepped Fermi energy level arrangement between the defective TiO2 anode and MoO3 cathode enables a remarkable photocurrent response (Mode 1). Then, MoO3 itself is a widely used EC candidate, which can react with free Li-ions to form a LixMoO3 intermediate, and its color will change from white to blue accordingly (Mode 2). More importantly, MoO3 is also a Li-ion host and the potential of LixMoO3 depends on the inserted Li-ion quantity deduced by spectral analysis on residual Li-ions in the electrolyte (Mode 3). The EC signal endows fast visual detection, and triple-mode cross-validation improves reliability and accuracy. As a result, this PEC-EC-ST triple-mode molecularly imprinted sensor has a wide linear range (1-5000 μg L-1), a low detection limit (0.18 μg L-1), selectivity, stability, reproducibility, and actual sample detection capability. This innovative multimode platform not only improves detection reliability but also broadens applications of electrochromic/energy storage materials in biosensors.

A dual-mode "signal-on" split-type aptasensor for bisphenol A via target-induced hybridization chain reaction amplification

Herein, a dual-mode detection system was constructed for efficient and accurate detection of bisphenol A (BPA) with the assistance of the BPA-induced hybridization chain reaction (HCR). The captured DNA (cDNA) was first modified on the surface of magnetic spheres modified with gold nanoparticles and polydopamine and then hybridized with the BPA aptamer to form double-stranded DNA (dsDNA). In the presence of the BPA target, the BPA aptamer was released from the surface of the magnetic sphere. The free cDNA triggered a HCR to construct a DNA duplex. Methylene blue (MB), as a bifunctional probe, was intercalated into the double-stranded DNA to amplify the photocurrent (IPEC) of the CdS-modified electrode and generate an electrochemical current (IEC) at the same time. Under the optimized conditions, the PEC and EC signal responses of the system were linear to the logarithm of BPA concentration in the range of 1.0 × 10-10 M to 1.0 × 10-5 M. The detection limits were found to be 1.27 × 10-11 M and 3.0 × 10-11 M using the PEC and EC methods, respectively. The constructed dual-mode biosensor exhibited good performance for real sample analysis, demonstrating its promising potential for practical applications. In addition, this dual-mode detection strategy provides more accurate and reliable detection results.

Rolling circle transcription amplification-directed construction of tandem spinach-based fluorescent light-up biosensor for label-free sensing of β-glucosyltransferase activity

β-glucosyltransferase (β-GT) can specifically catalyze the conversion of 5-hydroxymethylcytosine (5-hmC) to 5-glucosylhydroxy methylcytosine (5-ghmC), and it is associated with the control of phage-specific gene expression by affecting transcription process in vivo and in vitro. The current strategies for β-GT assay usually involve expensive equipment, laborious treatment, radioactive hazard, and poor sensitivity. Here, we report a Spinach-based fluorescent light-up biosensor for label-free measurement of β-GT activity by utilizing 5-hmC glucosylation-initiated rolling circle transcription amplification (RCTA). We design a 5-hmC-modified multifunctional circular detection probe (5-hmC-MCDP) that integrates the functions of target-recognition, signal transduction, and transcription amplification in one probe. The introduction of β-GT catalyzes 5-hmC glucosylation of 5-hmC-MCDP probe, protecting the glucosylated 5-mC-MCDP probe from the cleavage by MspI. The remaining 5-hmC-MCDP probe can initiate RCTA reaction with the aid of T7 RNA polymerase, generating tandem Spinach RNA aptamers. The tandem Spinach RNA aptamers can be lightened up by fluorophore 3,5-difluoro-4-hydroxybenzylidene imidazolinone, facilitating label-free measurement of β-GT activity. Notably, the high specificity of MspI-catalyzed cleavage of nonglucosylated probe can efficiently inhibit nonspecific amplification, endowing this assay with a low background. Due to the higher efficiency of RCTA than the canonical promoter-initiated RNA synthesis, the signal-to-noise ratio of RCTA is 4.6-fold higher than that of linear template-based transcription amplification. This method is capable of sensitively detecting β-GT activity with a limit of detection of 2.03 × 10-5 U/mL, and it can be used for the screening of inhibitors and determination of kinetic parameters, with great potential in epigenetic research and drug discovery.

Sensitive dual-mode sensing platform for Amyloid β detection: Combining dual Z-scheme heterojunction enhanced photoelectrochemistry analysis and dual-wavelength ratiometric electrochemiluminescence strategy

As a tumor biomarker, the accumulation of amyloid β oligomers (Aβo) in the brain has been suggested as a key feature in the pathogenesis and progression of Alzheimer's disease (AD). In this work, we designed a novel photoelectrochemical (PEC) and electrochemiluminescence resonance energy transfer (ECL-RET) dual-mode biosensor to achieve ultra-sensitive detection of Aβo. Specifically, the electrode surface modified Carbon Dots (C Dots) and the electrodeposited polyaniline (PANI) film formed a Z-scheme heterojunction reversing the photocurrent signal, and then the Aβo specific recognition peptide was attached to the surface via amide bonding between the amino group of PANI and carbonyl group of peptide. After that, in the presence of CdTe labeled specific recognition aptamer for Aβ (CdTe-Apt), Aβo was captured to construct a sandwich-type biosensor and exhibited a significantly enhanced cathodic photocurrent response because the formed dual Z-scheme heterojunction promoted charge separation efficiency. Interestingly, the proposed biosensor also caused a ratiometric change in the ECL intensity at 555 nm and 640 nm. Therefore, the developed biosensor achieved dual-mode detection of Aβo, where the PEC detection range of Aβo was from 10 fM to 0.1 μM (with a detection limit of 4.27 fM) and the ECL method provided a linear detection range of 10 fM to 10 nM (with a detection limit of 6.41 fM). The stability and reliability of the experimental results indicate that this has been a promising biosensing pattern and could be extended to the analysis of other biomarkers.

CRISPR/Cas-Based Techniques for Live-Cell Imaging and Bioanalysis

CRISPR/Cas systems have found widespread applications in gene editing due to their high accuracy, high programmability, ease of use, and affordability. Benefiting from the cleavage properties (trans- or cis-) of Cas enzymes, the scope of CRISPR/Cas systems has expanded beyond gene editing and they have been utilized in various fields, particularly in live-cell imaging and bioanalysis. In this review, we summarize some fundamental working mechanisms and concepts of the CRISPR/Cas systems, describe the recent advances and design principles of CRISPR/Cas mediated techniques employed in live-cell imaging and bioanalysis, highlight the main applications in the imaging and biosensing of a wide range of molecular targets, and discuss the challenges and prospects of CRISPR/Cas systems in live-cell imaging and biosensing. By illustrating the imaging and bio-sensing processes, we hope this review will guide the best use of the CRISPR/Cas in imaging and quantifying biological and clinical elements and inspire new ideas for better tool design in live-cell imaging and bioanalysis.

Sensitive dual-mode detection of carbendazim by molecularly imprinted electrochemical sensor based on biomass-derived carbon-loaded gold nanoparticles

A dual-mode electrochemical sensor was fabricated for carbendazim (CBD) detection. Biomass-derived carbon loaded gold nanoparticles (AuNPs/BC) were firstly coated on a glassy carbon electrode (GCE), and then molecularly imprinted polymer (MIP) of o-aminophenol was prepared on the resulting AuNPs/BC/GCE through electrochemical method in the presence of CBD. The AuNPs/BC had excellent conductivity, large surface and good electrocatalysis, while the imprinted film presented good recognition. Thus, the obtained MIP/AuNPs/BC/GCE exhibited sensitive current response to CBD. Furthermore, the sensor displayed good impedance response to CBD. Hence, a dual-mode detection platform for CBD was established. Under optimum conditions, the linear response ranges were as wide as 1.0 nM - 15 μM (by differential pulse voltammetry, DPV) and 1.0 nM - 10 μM (by electrochemical impedance spectroscopy, EIS), and the detection limits for these two methods were as low as 0.30 nM (S/N = 3) and 0.24 nM (S/N = 3), respectively. The sensor also had high selectivity, stability and reproducibility. The sensor was applied to detect CBD in spiked real samples, including cabbage, peach, apple and lake water, and the recoveries were 85.8-108% (by DPV) and 91.4-110% (by EIS); the relative standard deviations (RSD) were 3.4-5.3% (by DPV) and 3.7-5.1% (by EIS), respectively. The results were consistent with that obtained by high-performance liquid chromatography. Therefore, this sensor is a simple and effective tool for CBD detection, and it has good application potential.

Photoelectrochemical polarity-switching-mode and split-type biosensor based on SQ-COFs/BiOBr heterostructure for the detection of uracil-DNA glycosylase

Here, we constructed a split-type and photocurrent polarity switching photoelectrochemical (PEC) biosensor for ultrasensitive detection of Uracil-DNA glycosylase (UDG, abnormal UDG activity is correlated with human immunodeficiency, cancers, bloom syndrome, neurodegenerative diseases and so on) based on SQ-COFs/BiOBr heterostructure, as the photoactive materials, methylene blue (MB) as the signal sensitizer, and catalytic hairpin assembly (CHA) for signal amplification. Specifically, the photocurrent intensity generated by SQ-COFs/BiOBr was about 2 and 6.4 times of that of BiOBr and SQ-COFs alone, which could be responsible for the detection sensitivity for the proposed biosensor. In addition, it is not common to construct heterojunctions between covalent organic skeletons and inorganic nanomaterials. In UDG recognition tube, the plenty of COP probes loaded methylene blue (MB) were obtained by magnetic separation with the help of the simple chain displacement reaction of CHA. MB, as a responsive substance, can efficiently switched the photocurrent polarity of the SQ-COFs/BiOBr electrode from cathode to anode, which reduce the background signal, further improve the sensitivity of the biosensor. Based on the above, the linear detection range of our designed biosensor is 0.001-3 U mL^-1, and the detection limit (LODs) is as low as 4.07 × 10^-6 U mL^-1. Furthermore, the biosensor can still maintain good analytical performance for UDG in real sample, which means that it has broad application prospects in the field of biomedicine.

Rolling circle transcription and CRISPR/Cas12a-assisted versatile bicyclic cascade amplification assay for sensitive uracil-DNA glycosylase detection

Uracil-DNA glycosylase (UDG) is pivotal in maintaining genome integrity and aberrant expressed UDG is highly relevant to numerous diseases. Sensitive and accurate detecting UDG is critically significant for early clinical diagnosis. In this research, we demonstrated a sensitive UDG fluorescent assay based on rolling circle transcription (RCT)/CRISPR/Cas12a-assisted bicyclic cascade amplification strategy. Target UDG catalyzed to remove uracil base of DNA dumbbell-shape substrate probe (Sub_UDG) to produce an apurinic/apyrimidinic (AP) site, at which Sub_UDG was cleaved by apurinic/apyrimidinic endonuclease (APE1) subsequently. The exposed 5'-PO₄ was ligated with the free 3'-OH terminus to form an enclosed DNA dumbbell-shape substrate probe (E-Sub_UDG). E-Sub_UDG functioned as a template can actuate T7 RNA polymerase-mediated RCT signal amplification, generating multitudes of crRNA repeats. The resultant Cas12a/crRNA/activator ternary complex activated the activity of Cas12a, causing a significantly enhanced fluorescence output. In this bicyclic cascade strategy, target UDG was amplified via RCT and CRISPR/Cas12a, and the whole reaction was completed without complex procedures. This method enabled sensitive and specific monitor UDG down to 0.0005 U/mL, screen corresponding inhibitors, and analyze endogenous UDG in A549 cells at single-cell level. Importantly, this assay can be extended to analyze other DNA glycosylase (hAAG and Fpg) by altering the recognition site in DNA substrates probe rationally, thereby offering a potent tool for DNA glycosylase-associated clinical diagnosis and biomedical research.

A fluorescence-electrochemiluminescence dual-mode sensor based on a "switch" system for highly selective and sensitive K-ras gene detection

Herein, an fluorescence (FL)-electrochemiluminescence (ECL) dual-mode biosensor is constructed based on the dual-signal "turn-on" strategy of functionalized metal-organic frameworks nanosheets (RuMOFNSs)-tetraferrocene for K-ras gene detection, and the mechanism of bursting through front-line orbital theory is explained for the first time. Amino-functionalized tetraferrocene-labeled probe DNA molecules are linked to RuMOFNSs by covalent amide bonds, acting as FL and ECL intensity switches. The target DNA, complementary to the probe DNA, triggers cyclic amplification of the target by nucleic acid exonuclease III (Exo III), repelling tetraferrocene reporter groups away from RuMOFNSs and inhibiting the electron transfer process and photoinduced electron transfer (PET) effect. These phenomena induce a double turn-on of FL and ECL signals with a high signal-to-noise ratio. The developed FL-ECL dual-mode sensing platform provides sensitive detection of the K-ras gene with detection limits of 0.01 fM (the detection range is 1 fM to 1 nM) and 0.003 fM (the detection range is 0.01 fM to 10 pM), respectively. In addition, the proposed dual-mode sensor can be easily extended to detect other disease-related biomarkers by changing the specific target and probe base sequences, depicting potential applications in bioanalysis and early disease diagnosis.

A convenient fluorescent/electrochemical dual-mode biosensor for accurate detection of Pb2+ based on DNAzyme cycle

The presence of heavy metals in the ecological environment is a serious threat to human health. Therefore, it is very important to establish a simple and sensitive method for the detection of heavy metals. Currently, most of the methods are single-channel sensing, and these methods are prone to false-positive signals, which reduces the accuracy. In this work, Pb²⁺-DNAzyme was immobilized on magnetic beads (MBs) using a linkage of biotin and streptavidin and successfully applied to the construction of a fluorescent/electrochemical dual-mode (DM) biosensor. The supernatant after magnetic separation formed a double strand on the electrode, which was combined with methylene blue (MB) for electrochemical detection (EC). At the same time, FAM-d was added to the precipitate, and after magnetic separation, the supernatant was subjected to fluorescent detection (FL). Under optimal conditions, the signal response of the constructed dual-mode biosensor showed a good linear relationship with the concentration of Pb²⁺. The DNAzyme-based dual-mode biosensor achieved sensitive and selective detection of Pb²⁺ with good accuracy and reliability, opening a new way for the development of biosensing strategies for the detection of Pb²⁺. More importantly, the sensor has high sensitivity and accuracy for the detection of Pb²⁺ in actual sample analysis.

Self-Powered DNAzyme Walker Enables Dual-Mode Biosensor Construction for Electrochemiluminescence and Electrochemical Detection of MicroRNA

Herein, an electrochemiluminescence (ECL) and electrochemical (EC) dual-mode biosensor platform with a self-powered DNAzyme walking machine was established for accurate and sensitive detection of miRNA-21. By employing a magnesium ion (Mn²⁺)-dependent DNAzyme cleavage cycling reaction, the walking machine was built by assembling DNAzyme walking strands and ferrocene (Fc)-labeled substrate strands on the Au nanoparticles and graphitic carbon nitride nanosheet (g-C₃N₄ NS)-covered electrode. The DNAzyme walking strand was first prohibited by a blocker strand. After the addition of target miRNA-21 and Mn²⁺, the DNAzyme walker could be activated and produce autonomous movements along the electrode track fueled by Mn²⁺-dependent DNAzyme-catalyzed substrate cleavage without additional energy supply. Notably, each walking step resulted in the cleavage of a substrate strand and the release of a Fc-labeled DNA strand fragment, allowing us to acquire an extreme ECL signal recovery of g-C₃N₄ inhibited by Fc. Meanwhile, numerous Fc-labeled DNA fragments escaped from the surface of the electrode, directly producing an obvious decrease in the square wave voltammetry (SWV) signal from Fc on the same sensing platform. This work not only avoided difficultly assembling various signal indicators but also significantly improved the sensitivity through using self-powered DNAzyme-walker amplification. Moreover, the proposed design employed the same reaction to produce two signal output modes, which could eliminate the interference from diverse reactive pathways on the outcome to mutually improve the accuracy. Therefore, the dual-mode miRNA-21 biosensor exhibited wide detection ranges of 100 aM to 100 nM with low detection limits of 54.3 and 78.6 aM by ECL and SWV modes, respectively, which provided an efficient and universal biosensing approach with extensive applications in early disease diagnosis and bioanalysis.

Ultra-sensitive biosensor based on CRISPR-Cas12a and Endo IV coupled DNA hybridization reaction for uracil DNA glycosylase detection and intracellular imaging

As an essential biomarker associated with various diseases, Uracil-DNA Glycosylase (UDG) detection is vital for disease diagnosis, treatment selection, and prognosis assessment. In recent years, the signal amplification effect of the CRISPR-Cas12a trans-cleaved single-stranded DNA probe has provided an available strategy for constructing highly sensitive biosensors. However, its superior trans-cleavage activity has become a "double-edged sword" for building biosensors that can amplify the target signal while also amplifying the leakage signal, causing out of control. Therefore, the construction of structurally simple, extremely low-background, highly sensitive CRISPR-Cas12a-based biosensors is an urgent bottleneck problem in the field. Here, we applied CRISPR-Cas12a with a DNA hybridization reaction to develop a simple, rapid, low background, and highly sensitive method for UDG activity detection. It has no PAM restriction and the detection limit is as low as 2.5 × 10^-6 U/mL. As far as we know, this method is one of the most sensitive methods for UDG detection. We also used this system to analyze UDG activity in tumor cells (LOD: 1 cell/uL) and to evaluate the ability to screen for UDG inhibitors. Furthermore, we verified the possibility of intracellular UDG activity imaging by transfecting the biosensors to the cells. We believe this novel sensor has good clinical application prospects and will effectively broaden the application space of CRISPR-Cas12a.

Stimulus-Responsive Metal-Organic Framework Signal-Reporting System for Photoelectrochemical and Fluorescent Dual-Mode Detection of ATP

Dual-mode bioanalysis integrating photoelectrochemical (PEC) and other modes is emerging and allows signal cross-checking for more reliable results. Metal-organic frameworks (MOFs) have been shown to be attractive materials in various biological applications. This work presents the utilization of MOF encapsulation and stimuli-responsive decapsulation for dual-mode PEC and fluorescence (FL) bioanalysis. Photoactive dye methylene violet (MV) was encapsulated in zeolitic imidazolate framework-90 (ZIF-90) to form an MV@ZIF-90 hybrid material, and MV could be released by adenosine triphosphate (ATP)-induced ZIF-90 disintegration. The released MV not only had FL emission but also had a sensitization effect on the ZnIn₂S₄ (ZnInS) photoanode. Based on the MV-dependent sensitization effect and FL emission characteristic, a dual-mode PEC-FL strategy was established for ATP detection with low detection limits, that is, 3.2 and 4.1 pM for PEC and FL detection, respectively. This study features and will inspire the construction and implementation of smart MOF materials for dual-mode bioanalysis.

Bifunctional Magnetic Fe3O4@Cu2O@TiO2 Nanosphere-Mediated Dual-Mode Assay of PTP1B Activity Based on Photocurrent Polarity Switching and Nanozyme-Engineered Biocatalytic Precipitation Strategies

Dysregulation of protein phosphatases is associated with the progression of various human diseases and cancers. Herein, a photoelectrochemical (PEC)-quartz crystal microbalance (QCM) dual-mode sensing platform was developed for protein tyrosine phosphatase 1B (PTP1B) activity assay based on bifunctional magnetic Fe₃O₄@Cu₂O@TiO₂ nanosphere-mediated PEC photocurrent polarity switching and QCM signal amplification strategies. The PTP1B-specific phosphopeptide (P-peptide) with a cysteine end was designed and immobilized onto the QCM Au chip via the Au-S bond. Subsequently, the Fe₃O₄@Cu₂O@TiO₂ nanosphere was connected to the P-peptide via the specific interaction between the phosphate group on the P-peptide and TiO₂. After incubation with PTP1B, the dephosphorylation of the P-peptide occurred, causing some Fe₃O₄@Cu₂O@TiO₂ nanospheres to be released from the chip surface. The released magnetic Fe₃O₄@Cu₂O@TiO₂ nanospheres (labeled as R-Fe₃O₄@Cu₂O@TiO₂) were quickly separated via magnetic separation technology and attached to the Bi₂S₃-decorated magnetic indium-tin oxide (Bi₂S₃/MITO) electrode by magnetic force, inducing the switch of the photocurrent polarity of the electrode from anodic current (the Bi₂S₃/MITO electrode) to cathodic current (the R-Fe₃O₄@Cu₂O@TiO₂/Bi₂S₃/MITO electrode). Also, the nondephosphorylated P-peptide linked Fe₃O₄@Cu₂O@TiO₂ nanospheres as nanozymes with horseradish peroxidase activity to catalyze the formation of precipitation on the surface of the Au chip, leading to a frequency change of the QCM. Thus, the proposed PEC-QCM dual-mode sensing platform achieved accurate and reliable assay of PTP1B activity because of the different mechanisms and independent signal transductions. In addition, this dual-mode sensing platform can be easily extended for other protein phosphatase activity analysis and shows great potential in the early diagnosis of the protein phosphatase-related diseases and the protein phosphatase-targeted drug discovery.

Photoelectrochemical biosensing platform based on in situ generated ultrathin covalent organic framework film and AgInS2 QDs for dual target detection of HIV and CEA

In this work, a new photoelectrochemical (PEC) biosensing platform based on an ordered two-dimensional (2D) ultrathin covalent organic framework (COF) film and AgInS₂ quantum dots (QDs) has been developed to enable dual-target detection of HIV and CEA. The porous COF film was firstly in situ generated on ITO, displaying super-stable and intense photocurrent with excellent repeatability. Moreover, an effective PEC quenching probe was specifically designed by loading large number of AgInS₂ QDs on Au nanoparticles (NPs). After target HIV-induced cyclic amplification process to generate abundant DNA S0, the Au NPs-AgInS₂ QDs probe was binded to the COF film through DNA hybridization, enabling PEC signal of the COF film to turn "off" for ultra-sensitive detection of HIV. Furthermore, when CEA as the second target specifically binded to its aptamer, the Au NPs-AgInS₂ QDs quenching probe was released, achieving PEC signal "on" of the T-DA COF film for ultra-sensitive detection of CEA. This work opened a unique 2-D COF film-based PEC biosensing platform with excellent signal for rapid detection of dual targets, which can effectively avoid false positives and negatives and shows promising application for early prevention and detection of cancer diseases.

Dual-Signaling Photoelectrochemical Biosensor Based on Biocatalysis-Induced Vulcanization of Bi2MoO6 Nanosheets

A magnetic-assisted photoelectrochemical (PEC) and colorimetric (CL) dual-modal biosensing platform with high precision was established to monitor prostate-specific antigen (PSA) based on Bi₂MoO₆ nanosheets (BMO) by coupling the aptamer-guided hybridization chain reaction (HCR) with the hydrolysate-induced vulcanization reaction of Bi₂MoO₆ nanosheets. Upon addition of PSA, trigger DNA (tDNA) was released by the interaction between the target analyte and the aptamer and then further hybridized with anchor DNA (aDNA) conjugated on magnetic beads (MBs). The as-released tDNA initiated the target-assisted HCR in the presence of two alternating hairpin sequences (Bio-H1 and Bio-H2) to produce nicked long double-stranded DNA on the surface of MBs, where numerous alkaline phosphatase (ALP) enzymes could assemble with MBs through the biotin-avidin reaction, resulting in the hydrolysis of sodium thiophosphate (TP) to H₂S. The as-produced H₂S reacted with BMO to form vulcanized BMO (BMO-S), thus leading to obvious enhanced PEC performance under visible light with the color change from light yellow to brown. Having optimized the test conditions, the magnetic-assisted biosensing system holds a good quantitative diagnosis sensitivity area in a range of 5.0 pg mL^-1-100 ng mL^-1 with a calculated detection limit down to 3.5 pg mL^-1. Meanwhile, a visual colorimetric assay on basis of the change in the color of the materials was also realized. Given the exceptional performance of the constructed biosensor, it may possess great promise as an advanced bioanalytical tool for practical applications.

Catalytic single-molecule Förster resonance energy transfer biosensor for uracil-DNA glycosylase detection and cellular imaging

Uracil-DNA glycosylase (UDG) is essential to the maintenance of genomic integrity due to its critical role in base excision repair pathway. However, existing UDG assays suffer from laborious procedures, poor specificity, and limited sensitivity. In this research, we construct a catalytic single-molecule Föster resonance energy transfer (FRET) biosensor for in vitro and in vivo biosensing of UDG activity. Target UDG can remove uracil base from the detection probe and cause the cleavage of detection probe by apurinic/apyrimidinic endonuclease (APE1), which exposes its toehold domain and initiates catalytic assembly of two fluorescently labeled hairpin probes via toehold-meditated strand displacement reaction (SDA) to generate abundant DNA duplexes with amplified FRET signal. In this assay, target UDG signal is amplified via enzyme-free catalytic reaction and the whole reaction may be completed in one step, which greatly simplifies the assay procedure, reduces the assay time, and facilitates the cellular imaging. This biosensor enables specific and sensitive measurement of UDG down to 0.00029 U/mL, and it is suitable for analyzing kinetic parameters, screening inhibitors, and even imaging endogenous UDG in live cells. Importantly, this biosensor can visually quantify various DNA repair enzymes by rationally altering DNA substrates.

Versatile Photoelectrochemical Biosensing for Hg2+ and Aflatoxin B1 Based on Enhanced Photocurrent of AgInS2 Quantum Dot-DNA Nanowires Sensitizing NPC-ZnO Nanopolyhedra

Eliminating false positives or negatives in analysis has been a challenge. Herein, a phenomenon of polarity-switching photocurrent of AgInS₂ quantum dot (QD)-DNA nanowires reversing nitrogen-doped porous carbon-ZnO (NPC-ZnO) nanopolyhedra was found for the first time, and a versatile photoelectrochemical (PEC) biosensor with a reversed signal was innovatively proposed for dual-target detection. NPC-ZnO is a photoactive material with excellent PEC properties, while AgInS₂ QDs as a photosensitive material match NPC-ZnO in the energy level, which not only promotes the transfer of photogenerated carriers but also switches the direction of PEC current. Furthermore, in order to prevent spontaneous agglomeration of AgInS₂ (AIS) QDs and improve its utilization rate, a new multiple-branched DNA nanowire was specially designed to assemble AgInS₂ QDs for constructing amplified signal probes, which not only greatly increased the load of AgInS₂ QDs but also further enhanced the photoelectric signal. When the target Hg²⁺-induced cyclic amplification process generated abundant RDNA, the DNA nanowire signal probe with plenty of QDs was linked to the NPC-ZnO/electrode by RDNA, generating greatly amplified polarity-reversed photocurrent for signal "ON" detection of Hg²⁺. After specific binding of the target (aflatoxin B1, AFB1) to its aptamer, the signal probes of AIS QD-DNA nanowires were released, realizing signal "OFF" assay of AFB1. Thus, the proposed new PEC biosensor provides a versatile method for detection of dual targets and also effectively avoids both false positive and negative phenomena in the assay process, which has great practical application potential in both environmental and food analysis.

A facile dual-mode aptasensor based on AuNPs@MIL-101 nanohybrids for ultrasensitive fluorescence and surface-enhanced Raman spectroscopy detection of tetrodotoxin

The development of ultrasensitive, reliable, and facile detection technologies for trace tetrodotoxin (TTX) is challenging. We presented a facile dual-mode aptamer-based biosensor (aptasensor) for ultrasensitive fluorescence and surface-enhanced Raman spectroscopy (SERS) detection of TTX by using gold nanoparticles (AuNPs)-embedded metal-organic framework (MOF) nanohybrids (AuNPs@MIL-101) because of their superior properties. A TTX-specific aptamer labelled with fluorescence and Raman reporter cyanine-3 (Cy3-aptamer) was selected as the recognition element and signal probe. Without immobilisation processing steps, Cy3-aptamers were effectively adsorbed onto the surface of AuNPs@MIL-101, thereby generating both fluorescence quenching and SERS enhancement. The preferential binding of TTX towards the Cy3-aptamer triggered the release of rigid Cy3-aptamer-TTX complexes from the AuNPs@MIL-101 surface, which resulted in recovered fluorescence signals and weakened SERS signals. Switched fluorescence and SERS intensities exhibited excellent linear relationships with logarithms of TTX concentrations of 0.01-300 ng/mL, and ultrahigh detection sensitivities of 6 and 8 pg/mL, respectively, were obtained. Furthermore, two quantitative detection approaches for TTX-spiked puffer fish and clam samples obtained satisfactory spiked recoveries and coefficient of variation (CV) values. Notably, the dual-mode aptasensor also successfully determined natural TTX-contaminated samples, showing excellent practical applications. The results indicated that this dual-mode measurement not only was ultrasensitive and simple but also markedly boosted analysis reliability and precision. This study is the first to propose a dual-mechanism AuNPs@MIL-101-based aptasensor for detection of trace TTX and provides a favourable pathway for developing multimode sensing platforms for various applications.

Recent advances in biosensor for DNA glycosylase activity detection

Base excision repair (BER) is vital for maintaining the integrity of the genome under oxidative damage. DNA glycosylase initiates the BER pathway recognizes and excises the mismatched substrate base leading to the apurinic/apyrimidinic site generation, and simultaneously breaks the single-strand DNA. As the aberrant activity of DNA glycosylase is associated with numerous diseases, including cancer, immunodeficiency, and atherosclerosis, the detection of DNA glycosylase is significant from bench to bedside. In this review, we summarized novel DNA strategies in the past five years for DNA glycosylase activity detection, which are classified into fluorescence, colorimetric, electrochemical strategies, etc. We also highlight the current limitations and look into the future of DNA glycosylase activity monitoring.

Organic Field-Effect Transistor-Based Biosensors with Enhanced Sensitivity and Reliability under Illumination for Carcinoembryonic Antigen Bioassay

Achieving biosensors of high sensitivity and reliability is extremely significant for early diagnosis and treatment of tumor diseases. Herein, a novel organic field-effect transistor (OFET)-based biosensor was developed and applied for carcinoembryonic antigen (CEA) bioassay. This OFET-based biosensor can respond sensitively to the antigen-antibody immune-recognition reaction under illumination and darkness, respectively, thereby generating electrical signal changes of source-drain current (I_DS) and threshold voltage (V_th). The OFET-based biosensor exhibits detection limits for CEA detection of 0.5 and 0.2 pM, respectively, using I_DS and V_th as the response signals under darkness. When a specific intensity of light is applied, light will influence the charge-carrier transport process in the conductive channel, thus causing biosignals to turn into higher electrical signal changes of photocurrent and threshold voltage under illumination. Compared with the detection results in the dark, the biosensor exhibits higher sensitivity for CEA detection under illumination with detection limits of 13.5 and 16.9 fM. Also, multisignal outputs effectively improve the reliability of the biosensor for CEA detection. Consequently, with powerful detection functions, this OFET-based biosensor is expected to become a high-performance biosensing platform for the detection of various biological substances in the future.

Highly Selective and Sensitive microRNA-210 Assay Based on Dual-Signaling Electrochemical and Photocurrent-Polarity-Switching Strategies

Highly sensitive and selective microRNA (miRNA) assay is of great significance for disease diagnosis and therapy. Herein, a magnetic-assisted electrochemistry (EC)-photoelectrochemistry (PEC) dual-mode biosensing platform was developed for miRNA-210 detection based on dual-signaling EC and photocurrent-polarity-switching PEC strategies. Porous magnetic Fe₃O₄ octahedra with a large surface area were synthesized by calcining Fe-based metal-organic frameworks. Subsequently, the magnetic photoelectric materials (Fe₃O₄@CdS) were developed by the successive ionic layer adsorption and reaction method in Cd²⁺ and S^2- solutions. Then, the self-assembled DNA nanoprisms contained three thiols/hanging arms that could capture miRNA-210 efficiently and were anchored to the Fe₃O₄@CdS octahedra via the Cd-S bond. When miRNA-210 was present, the double-stranded DNA concatemers [the self-assembled duplex helixes based on a pair of methylene blue (MB)-labeled single-stranded DNAs (AP1 and AP2) through the hybridization chain reaction and then intercalated with adriamycin (Dox) into their grooves] were connected with the Fe₃O₄@CdS-DNA nanoprisms. MB and Dox not only acted as the electrochemical probes but also synergistically switched the photocurrent polarity of the Fe₃O₄@CdS octahedra. Thus, miRNA-210 was assayed sensitively and selectively via the proposed EC-PEC dual-mode biosensing platform. Additionally, the abovementioned recognition steps occurred in a homogeneous system, and the effects of the impurities and interferences on the miRNA-210 assay could be easily avoided by magnetic separation due to the good magnetic properties of Fe₃O₄ octahedra. The proposed EC-PEC dual-mode biosensing platform showed a wide range of potential applications in bioanalysis and early diagnosis of disease.

A DNAzyme-driven random biped DNA walking nanomachine for sensitive detection of uracil-DNA glycosylase activity

Highly specific and ultrasensitive detection of uracil-DNA glycosylase (UDG) activity is of great significance for maintaining genomic integrity and medical research of related diseases. Here, we constructed a random DNA walking nanomachine based on a DNAzyme for UDG activity detection on the AuNP (Au nanoparticle) surface. When UDG is present, the U bases in the Y structure are removed, resulting in AP sites, which will be cleaved by Endo-IV to generate a 3' concave end for Exo-III, causing the locking strand of the DNAzyme to be completely hydrolyzed by the Exo-III and release the walking strand to randomly pair with the substrate strand on the AuNP surface; then, the walking strand exerts its cleavage activity with the assistance of Mg2+ to cleave the substrate strand and keep the fluorophore 6-carboxyfluorescein (FAM) away from the surface of the AuNP, which restores the fluorescence signal of this system. In this way, sensitive detection of UDG can be realized, and the detection limit is as low as 3.69 × 10-6 U mL-1. In addition, we found that this method is highly specific to UDG and can be used to detect UDG specifically in complex samples, which has certain application prospects in biomedical research and clinical diagnosis related to UDG.

"Dual Signal-On" Split-Type Aptasensor for TNF-α: Integrating MQDs/ZIF-8@ZnO NR Arrays with MB-Liposome-Mediated Signal Amplification

Ultrasensitive and accurate detection of biomarkers in serum is of great importance for disease diagnosis and treatment. So far, the commonly used single-mode signal suffers from certain instinct drawbacks that restrict assay performances. Herein, we report the proof-of-concept fabrication of a split-type photoelectrochemical (PEC) and electrochemical (EC) dual-modal aptasensor for ultrasensitively tracing tumor necrosis factor-α, a noteworthy biological biomarker with essential clinical importance. By smart integrating molybdenum disulfide QDs/zeolitic imidazolate framework-8@ZnO nanorod arrays with a methylene blue-liposome-mediated signal amplification strategy, "dual signal-on" detection is accomplished based on a sandwich reaction of the target with aptamer-anchored carboxyl magnetic beads and an aptamer-confined MB liposome. Linear ranges of 5 fg/mL-5 μg/mL (detection limit 1.46 fg/mL) for PEC and 10 fg/mL-0.5 μg/mL (detection limit 6.14 fg/mL) for EC are obtained, respectively. An independent signal transduction mechanism supports the accuracy improvement, and a separate biological process from a translator enables convenient fabrication, short-time consumption, wider linearity, as well as outstanding reproducibility and stability in practical application. This work presents a universal bioassay route with prospects in biomedical and related areas.

Sensitive Dual-Mode Biosensors for CYFRA21-1 Assay Based on the Dual-Signaling Electrochemical Ratiometric Strategy and "On-Off-On" PEC Method

Herein, an electrochemical (EC)-photoelectrochemical (PEC) dual-mode biosensor was constructed for cytokeratin 19 fragment 21-1 (CYFRA21-1) assay based on the dual-signaling electrochemical ratiometric strategy and "on-off-on" PEC method. The indium tin oxide (ITO) electrode was modified by 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA)@C₆₀ and gold nanoparticles (Au NPs), and the double-stranded DNA composed of thiol/methylene blue (MB)-labeled single-stranded DNA (ssDNA) (S0-MB) and antibody/ferrocene (Fc)-labeled ssDNA (Ab1-S1-Fc) was immobilized on the Au NPs/PTCDA@C₆₀/ITO electrode via the Au-S bond between Au NPs and thiol of S0-MB. With the help of another antibody-labeled ssDNA (Ab2-S2), the presence of CYFRA21-1 triggered a typical antigen-antibody sandwich immune reaction (Ab1, CYFRA21-1, and Ab2) and proximity hybridization between Ab1-S1-Fc and Ab2-S2. This caused the release of Ab1-S1-Fc from the modified electrode and the change of S0-MB to a hairpin structure, resulting in a decrease (an increase) of the oxidation peak current of Fc (MB) and an increase of the photocurrent due to the enhancing (inhibiting) effect of MB (Fc) on the photoelectric performance of the Au NPs/PTCDA@C₆₀/ITO electrode. Thus, CYFRA21-1 was detected by the developed EC-PEC dual-mode sensing platform sensitively, and the linear response ranges of 0.001-40 ng/mL with a detection limit of 0.3 pg/mL for the EC technique and 0.0001-4 ng/mL with a detection limit of 0.03 pg/mL for the PEC method were obtained. Furthermore, by changing the specific antibodies of disease-related biomarkers, the developed dual-mode biosensing platform could be readily extended to detect other antigens, implying its great potential applications in biological analysis and early disease diagnosis.

Guiding-Strand-Controlled DNA Nucleases with Enhanced Specificity and Tunable Kinetics for DNA Mutation Detection

Nucleases are powerful tools in various biomedical applications, such as genetic engineering, biosensing, and molecular diagnosis. However, the commonly used nucleases (endonuclease IV, apurinic/apyrimidinic endonuclease-1, and λ exonuclease) are prone to the nonspecific cleavage of single-stranded DNA, making the desired reactions extremely low-yield and unpredictable. Herein, we have developed guiding-strand-controlled nuclease systems and constructed theoretical kinetic models to explain their mechanisms of action. The models displayed excellent agreement with the experimental results, making the kinetics highly predictable and tunable. Our method inhibited the nonspecific cleavage of single-stranded probes while maintaining highly efficient cleavage of double-stranded DNA. We also demonstrated the clinical practicability of the method by detecting a low-frequency mutation in a genomic DNA sample extracted from the blood of a patient with cancer. The limit of detection could be 0.01% for PTEN rs121909219. We believe that our findings provide a powerful tool for the field and the established model provides us a deeper understanding of the enzymatic activities of DNA nucleases.

Integration of magnetic separation and real-time ligation chain reaction for detection of uracil-DNA glycosylase

Uracil-DNA glycosylase (UDG) is a protein enzyme that initiates the base excision repair pathway for maintaining genome stability. Sensitive detection of UDG activity is important in the study of many biochemical processes and clinical applications. Here, a method for detecting UDG is proposed by integrating magnetic separation and real-time ligation chain reaction (LCR). First, a DNA substrate containing uracil base is designed to be conjugated to the magnetic beads. By introducing a DNA complementary to the DNA substrate, the uracil base is recognized and removed by UDG to form an apurinic/apyrimidinic (AP) site. The DNA substrate is then cut off from the AP site by endonuclease IV, releasing a single-strand DNA (ssDNA). After magnetic separation, the ssDNA is retained in the supernatant and then detected by real-time LCR. The linear range of the method is 5 × 10^-4 to 5 U/mL with four orders of magnitude, and the detection limit is 2.7 × 10^-4 U/mL. In the assay, ssDNA template obtained through magnetic separation can prevent other DNA from affecting the subsequent LCR amplification reaction, which provides a simple, sensitive, specific, and universal way to detect UDG and other repair enzymes. Furthermore, the real-time LCR enables the amplification reaction and fluorescence detection simultaneously, which simplifies the operation, avoids post-contamination, and widens the dynamic range. Therefore, the integration of magnetic separation and real-time LCR opens a new avenue for the detection of UDG and other DNA repair enzymes.

A Methodology for Ultrasensitive Detection of Sequence-Specific DNA or Uracil-DNA Glycosylase Activity

Ultrasensitive detection of sequence-specific DNA and uracil-DNA glycosylase (UDG) activity shows great practical significance in clinical diagnostic and biomedical studies. Here, a methodology based on a CRISPR/Cas12a system coupled with enhanced strand displacement amplification (E-SDA) was innovatively established for sequence-specific DNA or UDG activity detection. Sequence-specific DNA or DNA primers processed by UDG and Endonuclease IV can initiate E-SDA, generating auxiliary DNA chains, which act as activators to unlock the indiscriminate collateral cleavage activities (trans-cleavage) of the CRISPR/Cas12a. Then, the activated CRISPR/Cas12a, which intrinsically possesses the ability of significant signal amplification, can indiscriminately cleave the added cleavage reporters in the system. Thus, the multistep amplification of the method was obtained. Under the selected experimental conditions, the established method can achieve an actual sensitivity of sequence-specific DNA up to 100 aM within 2.5 h or ultralow UDG activity (3.1×10^-5 U/mL) detection within 3.5 h. We believe that the proposed method will have great potential for practical application in ultrasensitive detection of sequence-specific DNA or UDG activity.