Prolonged unloading in growing rats reduces cortical osteocyte lacunar density and volume in the distal tibia

Osteocyte Remodeling of the Lacunar-Canalicular System: What's in a Name?

PURPOSE OF REVIEW

Osteocytes directly modify the bone surrounding the expansive lacunar-canalicular system (LCS) through both resorption and deposition. The existence of this phenomenon is now widely accepted, but is referred to as "osteocyte osteolysis," "LCS remodeling," and "perilacunar remodeling," among other names. The uncertainty in naming this physiological process reflects the many persistent questions about why and how osteocytes interact with local bone matrix. The goal of this review is to examine the purpose and nature of LCS remodeling and its impacts on multiscale bone quality.

RECENT FINDINGS

While LCS remodeling is clearly important for systemic calcium mobilization, this process may have additional potential drivers and may impact the ability of bone to resist fracture. There is abundant evidence that the osteocyte can resorb and replace bone mineral and does so outside of extreme challenges to mineral homeostasis. The impacts of the osteocyte on organic matrix are less certain, especially regarding whether osteocytes produce osteoid. Though multiple lines of evidence point towards osteocyte production of organic matrix, definitive work is needed. Recent high-resolution imaging studies demonstrate that LCS remodeling influences local material properties. The role of LCS remodeling in the maintenance and deterioration of bone matrix quality in aging and disease are active areas of research. In this review, we highlight current progress in understanding why and how the osteocyte removes and replaces bone tissue and the consequences of these activities to bone quality. We posit that answering these questions is essential for evaluating whether, how, when, and why LCS remodeling may be manipulated for therapeutic benefit in managing bone fragility.

Abnormal morphological features of osteocyte lacunae in adolescent idiopathic scoliosis: A large-scale assessment by ultra-high-resolution micro-computed tomography

AIM

Abnormal osteocyte lacunar morphology in adolescent idiopathic scoliosis (AIS) has been reported while the results were limited by the number of osteocyte lacunae being quantified. The present study aimed to validate previous findings through (a) comparing morphological features of osteocyte lacunae between AIS patients and controls in spine and ilium using a large-scale assessment, and (b) investigating whether there is an association between the acquired morphological features of osteocyte lacunae and disease severity in AIS.

METHOD

Trabecular bone tissue of the facet joint of human vertebrae on both concave and convex sides at the apex of the scoliotic curve were collected from 4 AIS and 5 congenital scoliosis (CS) patients, and also at the same anatomic site from 3 non-scoliosis (NS) subjects intraoperatively. Trabecular bone tissue from ilium was obtained from 12 AIS vs 9 NS subjects during surgery. Osteocyte lacunae were assessed using ultra-high-resolution micro-computed tomography. Clinical information such as age, body mass index (BMI) and radiological Cobb angle of the major curve were collected.

RESULTS

There was no significant difference between density of osteocyte lacuna and bone volume fraction (BV/TV) between groups. A total of 230,076 and 78,758 osteocyte lacunae from facet joints of apical vertebra of scoliotic curve and iliac bone were included in the analysis, respectively. In facet joint bone biopsies, lacunar stretch (Lc.St) was higher, and lacunar equancy (Lc.Eq), lacunar oblateness (Lc.Ob), and lacunar sphericity (Lc.Sr) were lower in AIS and CS groups when compared with NS group. CA side was associated with higher Lc.St when compared with CX side. In iliac bone biopsies, Lc.Ob was higher and lacunar surface area (Lc.S) was lower in AIS group than NS group. Median values of Lc.St, Lc.Eq and Lc.Sr were significantly associated with radiological Cobb angle with adjustment for age and BMI (R-squared: 0.576, 0.558 and 0.543, respectively).

CONCLUSIONS

This large-scale assessment of osteocyte lacunae confirms that AIS osteocyte lacunae are more oblate in iliac bone that is less influenced by asymmetric loading of the deformed spine than the vertebrae. Shape of osteocyte lacunae in iliac bone is associated with radiological Cobb angle of the major curve in AIS patients, suggesting the likelihood of systemic abnormal osteocyte morphology in AIS. Osteocyte lacunae from concave side of scoliotic curves were more stretched in both AIS and CS groups, which is likely secondary to asymmetric mechanical loading.

Similarities Between Disuse and Age-Induced Bone Loss

Disuse and aging are known risk factors associated with low bone mass and quality deterioration, resulting in increased fracture risk. Indeed, current and emerging evidence implicate a large number of shared skeletal manifestations between disuse and aging scenarios. This review provides a detailed overview of current preclinical models of musculoskeletal disuse and the clinical scenarios they seek to recapitulate. We also explore and summarize the major similarities between bone loss after extreme disuse and advanced aging at multiple length scales, including at the organ/tissue, cellular, and molecular level. Specifically, shared structural and material alterations of bone loss are presented between disuse and aging, including preferential loss of bone at cancellous sites, cortical thinning, and loss of bone strength due to enhanced fragility. At the cellular level bone loss is accompanied, during disuse and aging, by increased bone resorption, decreased formation, and enhanced adipogenesis due to altered gap junction intercellular communication, WNT/β-catenin and RANKL/OPG signaling. Major differences between extreme short-term disuse and aging are discussed, including anatomical specificity, differences in bone turnover rates, periosteal modeling, and the influence of subject sex and genetic variability. The examination also identifies potential shared mechanisms underlying bone loss in aging and disuse that warrant further study such as collagen cross-linking, advanced glycation end products/receptor for advanced glycation end products (AGE-RAGE) signaling, reactive oxygen species (ROS) and nuclear factor κB (NF-κB) signaling, cellular senescence, and altered lacunar-canalicular connectivity (mechanosensation). Understanding the shared structural alterations, changes in bone cell function, and molecular mechanisms common to both extreme disuse and aging are paramount to discovering therapies to combat both age-related and disuse-induced osteoporosis. © 2022 American Society for Bone and Mineral Research (ASBMR).

Tunnels in the rock: Dynamics of osteocyte morphogenesis

Osteocytes are dynamic, bone matrix-remodeling cells that form an intricate network of interconnected projections through the bone matrix, called the lacunar-canalicular system. Osteocytes are the dominant mechanosensory cells in bone and their mechanosensory and mechanotransductive functions follow their morphological form. During osteocytogenesis and development of the osteocyte lacunar-canalicular network, osteocytes must dramatically remodel both their cytoskeleton and their extracellular matrix. In this review, we summarize our current understanding of the mechanisms that govern osteocyte differentiation, cytoskeletal morphogenesis, mechanotransduction, and matrix remodeling. We postulate that the physiologic activation of matrix remodeling in adult osteocytes, known as perilacunar/canalicular remodeling (PLR) represents a re-activation of the developmental program by which the osteocyte network is first established. While much of osteocyte biology remains unclear, new tools and approaches make the present moment a particularly fruitful and exciting time to study the development of these remarkable cells.

Large-scale quantification of human osteocyte lacunar morphological biomarkers as assessed by ultra-high-resolution desktop micro-computed tomography

Ultra-high-resolution imaging of the osteocyte lacuno-canalicular network (LCN) three-dimensionally (3D) in a high-throughput fashion has greatly improved the morphological knowledge about the constituent structures - positioning them as potential biomarkers. Technologies such as serial focused ion beam/scanning electron microscopy (FIB/SEM) and confocal scanning laser microscopy (CLSM) can image in extremely high resolution, yet only capture a small number of lacunae. Synchrotron radiation computed tomography (SR-CT) can image with both high resolution and high throughput but has a limited availability. Desktop micro-computed tomography (micro-CT) provides an attractive balance: high-throughput imaging on the micron level without the restrictions of SR-CT availability. In this study, accuracy, reproducibility, and sensitivity of large-scale quantification of human osteocyte lacunar morphometries were assessed by ultra-high-resolution desktop micro-computed tomography. For this purpose, thirty-one transiliac human bone biopsies containing trabecular and cortical regions were imaged using ultra-high-resolution desktop micro-CT at a nominal isotropic voxel resolution of 1.2 µm. The resulting 3D images were segmented, component labeled, and the following morphometric parameters of 7.71 million lacunae were measured: Lacunar number (Lc.N), density (Lc.N/BV), porosity (Lc.TV/BV), volume (Lc.V), surface area (Lc.S), surface area to volume ratio (Lc.S/Lc.V), stretch (Lc.St), oblateness (Lc.Ob), sphericity (Lc.Sr), equancy (Lc.Eq), and angle (Lc.θ). Accuracy was quantified by comparing automated lacunar identification to manual identification. Mean true positive rate (TPR), false positive rate (FPR), and false negative rate (FNR) were 89.0%, 3.4%, and 11.0%, respectively. Regarding the reproducibility of lacunar morphometry from repeated measurements, precision errors were low (0.2-3.0%) and intraclass correlation coefficients were high (0.960-0.999). Significant differences between cortical and trabecular regions (p<0.001) existed for Lc.N/BV, Lc.TV/BV, local lacunar surface area (<Lc.S>), and local lacunar volume (<Lc.V>), all of which demonstrate the sensitivity of the method and are possible biomarker candidates. This study provides the foundation required for future large-scale morphometric studies using ultra-high-resolution desktop micro-CT and high-throughput analysis of millions of osteocyte lacunae in human bone samples.

Lacunar-canalicular bone remodeling: Impacts on bone quality and tools for assessment

Osteocytes can resorb as well as replace bone adjacent to the expansive lacunar-canalicular system (LCS). Suppressed LCS remodeling decreases bone fracture toughness, but it is unclear how altered LCS remodeling impacts bone quality. The first goal of this review is to assess how LCS remodeling impacts LCS morphology as well as the composition and mechanical properties of surrounding bone tissue. The second goal is to compare tools available for the assessment of bone quality at length-scales that are physiologically-relevant to LCS remodeling. We find that changes to LCS morphology occur in response to a variety of physiological conditions and diseases and can be classified in two general phenotypes. In the 'aging phenotype', seen in aging and in some disuse models, the LCS is truncated and osteocytes apoptosis is increased. In the 'osteocytic osteolysis' phenotype, which is adaptive in some physiological settings and possibly maladaptive in others, the LCS enlarges and osteocytes generally maintain viability. Bone composition and mechanical properties vary near the osteocyte and change with at least some conditions that alter LCS morphology. However, few studies have evaluated bone composition and mechanical properties close to the LCS and so the impacts of LCS remodeling phenotypes on bone tissue quality are still undetermined. We summarize the current understanding of how LCS remodeling impacts LCS morphology, tissue-scale bone composition and mechanical properties, and whole-bone material properties. Tools are compared for assessing tissue-scale bone properties, as well as the resolution, advantages, and limitations of these techniques.

Quantifying intracortical bone microstructure: A critical appraisal of 2D and 3D approaches for assessing vascular canals and osteocyte lacunae

Describing and quantifying vascular canal orientation and volume of osteocyte lacunae in bone is important in studies of bone growth, mechanics, health and disease. It is also an important element in analysing fossil bone in palaeohistology, key to understanding the growth, life and death of extinct animals. Often, bone microstructure is studied using two-dimensional (2D) sections, and three-dimensional (3D) shape and orientation of structures are estimated by modelling the structures using idealised geometries based on information from their cross sections. However, these methods rely on structures meeting strict geometric assumptions. Recently, 3D methods have been proposed which could provide a more accurate and robust approach to bone histology, but these have not been tested in direct comparison with their 2D counterparts in terms of accuracy and sensitivity to deviations from model assumptions. We compared 2D and 3D methodologies for estimating key microstructural traits using a combination of experimental and idealised test data sets. We generated populations of cylinders (canals) and ellipsoids (osteocyte lacunae), varying the cross-sectional aspect ratios of cylinders and orientation of ellipsoids to test sensitivity to deviations from cylindricality and longitudinal orientation, respectively. Using published methods, based on 2D sections and 3D data sets, we estimated cylinder orientation and ellipsoid volume. We applied the same methods to six CT data sets of duck cortical bone, using the full volumes for 3D measurements and single CT slices to represent 2D sections. Using in silico test data sets that did deviate from ideal cylinders and ellipsoids resulted in inaccurate estimates of cylinder or canal orientation, and reduced accuracy in estimates of ellipsoid and lacunar volume. These results highlight the importance of using appropriate 3D imaging and quantitative methods for quantifying volume and orientation of 3D structures and offer approaches to significantly enhance our understanding of bone physiology based on accurate measures for bone microstructures.

Control of Bone Matrix Properties by Osteocytes

Osteocytes make up 90-95% of the cellular content of bone and form a rich dendritic network with a vastly greater surface area than either osteoblasts or osteoclasts. Osteocytes are well positioned to play a role in bone homeostasis by interacting directly with the matrix; however, the ability for these cells to modify bone matrix remains incompletely understood. With techniques for examining the nano- and microstructure of bone matrix components including hydroxyapatite and type I collagen becoming more widespread, there is great potential to uncover novel roles for the osteocyte in maintaining bone quality. In this review, we begin with an overview of osteocyte biology and the lacunar-canalicular system. Next, we describe recent findings from in vitro models of osteocytes, focusing on the transitions in cellular phenotype as they mature. Finally, we describe historical and current research on matrix alteration by osteocytes in vivo, focusing on the exciting potential for osteocytes to directly form, degrade, and modify the mineral and collagen in their surrounding matrix.

Elevated activity levels do not influence extrinsic fiber attachment morphology on the surface of muscle-attachment sites

Extrinsic fibers (EFs) are a type of penetrating collagenous fiber, closely related to the periodontal ligament, which help anchor soft tissue into bone. These fibers are associated with muscle attachment sites (entheses). Their size and grouping patterns are thought to be indicative of the loading history of the muscle. EFs are of particular significance in anthropology as potential tools for the reconstruction of behavior from skeletal remains and, specifically, entheses. In this study, we used a mouse model to experimentally test how activity level alters the morphology of EF insertion sites on the bone surface of a fibrocartilaginous enthesis, the biceps brachii insertion. Further, we adapted surface metrological techniques from studies of dental wear to perform automated, quantitative and non-destructive analysis of bone surface histology. Our results show that experimentally increased activity had no significant effect on the quantity or density of EF insertions at the enthesis, nor on the size of those insertions. Although EF presence does indicate muscle attachment, activity did not have an observable effect on EF morphology.

No Signature of Osteocytic Osteolysis in Cortical Bone from Lactating NMRI Mice

The roles of osteocytes in bone homeostasis have garnered increasing attention since it has been realized that osteocytes communicate with other organs. It has long been debated whether and/or to which degree osteocytes can break down the bone matrix surrounding them in a process called osteocytic osteolysis. Osteocytic osteolysis has been indicated to be induced by a number of skeletal challenges including lactation in CD1 and C57BL/6 mice, whereas immobilization-induced osteocytic osteolysis is still a matter of controversy. Motivated by the wish to understand this process better, we studied osteocyte lacunae in lactating NMRI mice, which is a widely used outbred mouse strain. Surprisingly, no trace of osteocytic osteolysis could be detected in tibial or femoral cortical bone either by 3D investigation by synchrotron nanotomography, by studies of lacunar cross-sectional areas using scanning electron microscopy, or by light microscopy. These results lead us to conclude that osteocytic osteolysis does not occur in NMRI mice as a response to lactation, in turn suggesting that osteocytic osteolysis may not play a generic role in mobilizing calcium during lactation.

Canalicular Junctions in the Osteocyte Lacuno-Canalicular Network of Cortical Bone

The osteocyte lacuno-canalicular network (LCN) is essential for bone remodeling because osteocytes regulate cell recruitment. This has been proposed to occur through liquid-flow-induced shear forces in the canaliculi. Models of the LCN have thus far assumed that it contains canaliculi connecting the osteocyte lacunae. However, here, we reveal that enlarged spaces occur at places where several canaliculi cross; we name these spaces canalicular junctions. We characterize them in detail within mice cortical bone using synchrotron nanotomography at two length scales, with 50 and 130 nm voxel size, and show that canalicular junctions occur at a density similar to that of osteocyte lacunae and that canalicular junctions tend to cluster. Through confocal laser scanning microscopy, we show that canalicular junctions are widespread as we have observed them in cortical bone from several species, even though the number density of the canalicular junctions was not universal. Fluid flow simulations of a simple model system with and without a canalicular junction clearly show that liquid mass transport and flow velocities are altered by the presence of canalicular junctions. We suggest that these canalicular junctions may play an important role in osteocyte communication and possibly also in canalicular fluid flow. Therefore, we believe that they constitute an important component in the bone osteocyte network.

Botox-induced muscle paralysis alters intracortical porosity and osteocyte lacunar density in skeletally mature rats

Reduced mechanical loading can lead to disuse osteoporosis, resulting in bone fragility. Disuse models report macroscopic bone loss due to muscle inactivity and immobilization, yet only recently has there been quantification of the effects of disuse on the vascular pores and osteocyte network, which are believed to play an important role in mechanotransduction via interstitial fluid flow. The goal of this study was to perform a high-resolution analysis of the effects of muscle inactivity on intracortical porosity and osteocyte lacunar density in skeletally mature rats. Muscle paralysis was induced in 20-week-old female Sprague Dawley rats by injection of botulinum neurotoxin. Rats were injected in the right hindlimb muscles with either Botox (BTX, n = 8) or saline solution (CTRL, n = 8), with a third group used as baseline controls (n = 8). Four weeks after injection, Botox caused a ∼60% reduction in hindlimb muscle mass. High-resolution micro-CT analysis showed that Botox-induced muscle paralysis increased vascular canal porosity and reduced osteocyte lacunar density within the tibial metaphysis cortex. Cortical thickness and other areal properties were diminished in the proximal tibial metaphysis, whereas no differences were found in the mid-diaphysis. Within the BTX group, the injected limbs showed a lower cancellous bone volume fraction relative to the contralateral limb. These results indicate that diminished muscle activity alters the vascular canal porosity and osteocyte lacunar density in cortical bone, which could alter interstitial fluid flow, affecting molecular transport and the transmission of mechanical signals to osteocytes. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res.

Ptychographic X-ray CT characterization of the osteocyte lacuno-canalicular network in a male rat's glucocorticoid induced osteoporosis model

Ptychographic X-ray computed tomography (PXCT) is a quantitative imaging modality that non-destructively maps the 3D electron density inside an object with tens of nanometers spatial resolution. This method provides unique access to the morphology and structure of the osteocyte lacuno-canalicular network (LCN) and nanoscale density of the tissue in the vicinity of an osteocyte lacuna. Herein, we applied PXCT to characterize the lacunae and LCN in a male Wistar rat model of glucocorticoid-induced osteoporosis (GIO). The ptychographic images revealed significant (p < 0.05) differences in the number of canaliculi originating from the lacuna per ellipsoidal surface unit, Ca.Nb (p = 0.0106), and the 3D morphology of the lacuna (p = 0.0064), between GIO and SHAM groups. Moreover, the mean canalicular diameter, Ca.Dm, was slightly statistically un-significantly smaller in GIO (152 ± 6.5) nm than in SHAM group (165 ± 8) nm (p = 0.053). Our findings indicate that PXCT can non-destructively provide detailed, nanoscale information on the 3D organization of the LCN in correlative studies of pathologies, such as osteoporosis, leading to improved diagnosis and therapy.

A new open-source tool for measuring 3D osteocyte lacunar geometries from confocal laser scanning microscopy reveals age-related changes to lacunar size and shape in cortical mouse bone

Osteocytes can participate in systemic mineral homeostasis through perilacunar maintenance and remodeling, where changes to osteocyte lacunar morphology may affect bone structural integrity, tissue strains, and osteocyte mechanosensitivity. Though aging is associated with both decreased bone quality and altered mineral metabolism, it is not known if osteocyte lacunae undergo age-related changes in geometry. In order to survey lacunar changes with age, we developed an open-source program whereby 3D osteocyte lacunae are automatically segmented and then subsequently reconstructed from confocal laser scanning microscopy (CLSM) depth stacks for quantitative analysis of geometry and orientation. This approach takes advantage of the availability and speed of CLSM while avoiding time-consuming and bias-prone manual segmentation. Unlike conventional approaches used to quantify osteocyte lacunar morphology, CLSM enables facile analysis in three-dimensions with clear identification of osteocyte lacunae. We report that 3D osteocyte lacunae measured by CLSM become smaller, more spherical, more oblate, more spatially disorganized, and more sparsely populated with increased age in C57Bl/6 mouse cortical bone in groups spanning 6-24 months old. Critically, these age-related changes are in large part not observed in 2D analyses from the same samples. These results (1) demonstrate proof-of-concept of an efficient method to quantitatively assess osteocyte lacunae in 3D for application to a wide range of studies and (2) motivate further inquiry into how changes to osteocyte lacunar geometries and perilacunar material contribute to diminished bone quality in aging.

Aging, Osteocytes, and Mechanotransduction

PURPOSE OF REVIEW

The bone is able to adapt its structure to mechanical signals via the bone remodeling process governed by mechanosensitive osteocytes. With aging, an imbalance in bone remodeling results in osteoporosis. In this review, we hypothesized that changes in lacunar morphology underlie the decreased bone mechanoresponsiveness to mechanical loading with aging.

RECENT FINDINGS

Several studies have reported considerable variations in the shape of osteocytes and their lacunae with aging. Since osteocytes can sense matrix strain directly via their cell bodies, the variations in osteocyte morphology may cause changes in osteocyte mechanosensitivity. As a consequence, the load-adaptive response of osteocytes may change with aging, even when mechanical loading would remain unchanged. Though extensive quantitative data is lacking, evidence exists that the osteocyte lacunae are becoming smaller and more spherical with aging. Future dedicated studies might reveal whether these changes would affect osteocyte mechanosensation and the subsequent biological response, and whether this is (one of) the pathways involved in age-related bone loss.

Cyclic mechanical stretch contributes to network development of osteocyte-like cells with morphological change and autophagy promotion but without preferential cell alignment in rat

Osteocytes play important roles in controlling bone quality as well as preferential alignment of biological apatite c-axis/collagen fibers. However, the relationship between osteocytes and mechanical stress remains unclear due to the difficulty of three-dimensional (3D) culture of osteocytes in vitro. The aim of this study was to investigate the effect of cyclic mechanical stretch on 3D-cultured osteocyte-like cells. Osteocyte-like cells were established using rat calvarial osteoblasts cultured in a 3D culture system. Cyclic mechanical stretch (8% amplitude at a rate of 2 cycles min-1) was applied for 24, 48 and 96 consecutive hours. Morphology, cell number and preferential cell alignment were evaluated. Apoptosis- and autophagy-related gene expression levels were measured using quantitative PCR. 3D-cultured osteoblasts became osteocyte-like cells that expressed osteocyte-specific genes such as Dmp1, Cx43, Sost, Fgf23 and RANKL, with morphological changes similar to osteocytes. Cell number was significantly decreased in a time-dependent manner under non-loaded conditions, whereas cyclic mechanical stretch significantly prevented decreased cell numbers with increased expression of anti-apoptosis-related genes. Moreover, cyclic mechanical stretch significantly decreased cell size and ellipticity with increased expression of autophagy-related genes, LC3b and atg7. Interestingly, preferential cell alignment did not occur, irrespective of mechanical stretch. These findings suggest that an anti-apoptotic effect contributes to network development of osteocyte-like cells under loaded condition. Spherical change of osteocyte-like cells induced by mechanical stretch may be associated with autophagy upregulation. Preferential alignment of osteocytes induced by mechanical load in vivo may be partially predetermined before osteoblasts differentiate into osteocytes and embed into bone matrix.

Accuracy and reproducibility of mouse cortical bone microporosity as quantified by desktop microcomputed tomography

Bone's microporosity plays important roles in bone biology and bone mechanical quality. In this study, we explored the accuracy and reproducibility of nondestructive desktop μCT for 3D visualization and subsequent morphometric analysis of mouse cortical bone microporosity including the vascular canal network and osteocyte lacunae. The accuracy of measurements was evaluated in five murine fibula using confocal laser scanning microscopy (CLSM) in conjunction with Fluorescein isothiocyanate (FITC) staining as the reference method. The reproducibility of μCT-derived cortical bone microstructural indices was examined in 10 fibulae of C57Bl/6J male mice at a nominal resolution of 700 nanometer. Three repeated measurements were made on different days. An excellent correlation between μCT and CLSM was observed for both mean lacuna volume (r = 0.98, p = 0.002) and for mean lacuna orientation (r = 0.93, p = 0.02). Whereas the two techniques showed no significant differences for these parameters, the mean lacuna sphericity acquired from μCT was significantly higher than CLSM (p = 0.01). Reproducibility was high, with precision errors (PE) of 1.57-4.69% for lacuna parameters, and of 1.01-9.45% for vascular canal parameters. Intraclass correlation coefficient (ICC) showed a high reliability of the measurements, ranging from 0.998-1.000 for cortical parameters, 0.973-0.999 for vascular canal parameters and 0.755-0.991 for lacuna parameters. In conclusion, desktop μCT is a valuable tool to quantify the 3D characteristics of bone vascular canals as well as lacunae which can be applied to intact murine bones with high accuracy and reproducibility. Thus, μCT might be an important tool to improve our understanding of the physiological and biomechanical significance of these cannular and lacunar structure in cortical bone.

Effect of Macroanatomic Bone Type and Estrogen Loss on Osteocyte Lacunar Properties in Healthy Adult Women

This is the first study to examine clinical human bone specimens by three-dimensional imaging to characterize osteocyte lacunar properties as a function of macroanatomic bone type and estrogen loss. We applied laboratory-based instrumentation [3D X-ray microscope (3DXRM), MicroXCT-200; Carl Zeiss/Xradia, Inc.] that reaches the same resolution as synchrotron microscopy. We used serial transiliac bone biopsy specimens to examine the effect of macroanatomic bone type and estrogen status on osteocyte lacunar properties. These properties include lacunar size (volume, axes lengths of the ellipsoidal lacunar voids), distribution (density, average near-neighbor lacunar distance), and shape factors (sphericity ratio, average eigenvalues, degree of equancy, elongation, and flatness) in both cortical and trabecular bone tissue. The lacunar properties (volume, surface area, density, near-neighbor distance, etc.) and the shape factors (E1, L1, L2, degree of equancy, degree of elongation) were different between cortical and trabecular bone regardless of estrogen status. In cortical bone and trabecular nodes, the lacunar void volume and surface area were either smaller or tended to be smaller in postmenopausal as compared to premenopausal women. The void volume-to-bone volume ratio of cortical bone showed declining trends with estrogen loss. While there were differences between trabecular and cortical bone tissue, the lacunar void sphericity ratio for trabecular struts shows decreasing trends in postmenopausal women. These data suggest that using 3DXRM can provide new insight into osteocyte lacunar properties in transiliac bone biopsies from patients with various skeletal disease/conditions and pharmaceutical treatments.

One-month spaceflight compromises the bone microstructure, tissue-level mechanical properties, osteocyte survival and lacunae volume in mature mice skeletons

The weightless environment during spaceflight induces site-specific bone loss. The 30-day Bion-M1 mission offered a unique opportunity to characterize the skeletal changes after spaceflight and an 8-day recovery period in mature male C57/BL6 mice. In the femur metaphysis, spaceflight decreased the trabecular bone volume (−64% vs. Habitat Control), dramatically increased the bone resorption (+140% vs. Habitat Control) and induced marrow adiposity invasion. At the diaphysis, cortical thinning associated with periosteal resorption was observed. In the Flight animal group, the osteocyte lacunae displayed a reduced volume and a more spherical shape (synchrotron radiation analyses), and empty lacunae were highly increased (+344% vs. Habitat Control). Tissue-level mechanical cortical properties (i.e., hardness and modulus) were locally decreased by spaceflight, whereas the mineral characteristics and collagen maturity were unaffected. In the vertebrae, spaceflight decreased the overall bone volume and altered the modulus in the periphery of the trabecular struts. Despite normalized osteoclastic activity and an increased osteoblast number, bone recovery was not observed 8 days after landing. In conclusion, spaceflight induces osteocyte death, which may trigger bone resorption and result in bone mass and microstructural deterioration. Moreover, osteocyte cell death, lacunae mineralization and fatty marrow, which are hallmarks of ageing, may impede tissue maintenance and repair.

Tomography-Based Quantification of Regional Differences in Cortical Bone Surface Remodeling and Mechano-Response

Bone has an adaptive capacity to maintain structural integrity. However, there seems to be a heterogeneous cortical (re)modeling response to loading at different regions within the same bone, which may lead to inconsistent findings since most studies analyze only one region. It remains unclear if the local mechanical environment is responsible for this heterogeneous response and whether both formation and resorption are affected. Thus, we compared the formation and resorptive response to in vivo loading and the strain environment at two commonly analyzed regions in the mouse tibia, the mid-diaphysis and proximal metaphysis. We quantified cortical surface (re)modeling by tracking changes between geometrically aligned consecutive in vivo micro-tomography images (time lapse 15 days). We investigated the local mechanical strain environment using finite element analyses. The relationship between mechanical stimuli and surface (re)modeling was examined by sub-dividing the mid-diaphysis and proximal metaphysis into 32 sub-regions. In response to loading, metaphyseal cortical bone (re)modeled predominantly at the periosteal surface, whereas diaphyseal (re)modeling was more pronounced at the endocortical surface. Furthermore, different set points and slopes of the relationship between engendered strains and remodeling response were found for the endosteal and periosteal surfaces at the metaphyseal and diaphyseal regions. Resorption was correlated with strain at the endocortical, but not the periosteal surfaces, whereas, formation correlated with strain at all surfaces, except at the metaphyseal periosteal surface. Therefore, besides mechanical stimuli, other non-mechanical factors are likely driving regional differences in adaptation. Studies investigating adaptation to loading or other treatments should consider region-specific (re)modeling differences.

Immobilization and long-term recovery results in large changes in bone structure and strength but no corresponding alterations of osteocyte lacunar properties

The ability of osteocytes to demineralize the perilacunar matrix, osteocytic osteolysis, and thereby participate directly in bone metabolism, is an aspect of osteocyte biology that has received increasing attention during the last couple of years. The aim of the present work was to investigate whether osteocyte lacunar properties change during immobilization and subsequent recovery. A rat cortical bone model with negligible Haversian remodeling effects was used, with temporary immobilization of one hindlimb induced by botulinum toxin. Several complementary techniques covering multiple length scales enabled correlation of osteocyte lacunar properties to changes observed on the organ and tissue level of femoral bone. Bone structural parameters measured by μCT and mechanical properties were compared to sub-micrometer resolution SR μCT data mapping an unprecedented number (1.85 million) of osteocyte lacunae. Immobilization induced a significant reduction in aBMD, bone volume, tissue volume, and load to fracture, as well as the muscle mass of rectus femoris. During the subsequent recovery period, the bone structural and mechanical properties were only partly regained in spite of a long-term (28weeks) study period. No significant changes in osteocyte lacunar volume, density, oblateness, stretch, or orientation were detected upon immobilization or subsequent recovery. In conclusion, the bone architecture and not osteocyte lacunar properties or bone material characteristics dominate the immobilization response as well as the subsequent recovery.

Impact of Non-Invasively Induced Motor Deficits on Tibial Cortical Properties in Mutant Lurcher Mice

It has been shown that Lurcher mutant mice have significantly altered motor abilities, regarding their motor coordination and muscular strength because of olivorecebellar degeneration. We assessed the response of the cross-sectional geometry and lacuno-canalicular network properties of the tibial mid-diaphyseal cortical bone to motor differences between Lurcher and wild-type (WT) male mice from the B6CBA strain. The first data set used in the cross-sectional geometry analysis consists of 16 mice of 4 months of age and 32 mice of 9 months of age. The second data set used in the lacunar-canalicular network analysis consists of 10 mice of 4 months of age. We compared two cross-sectional geometry and four lacunar-canalicular properties by I-region using the maximum and minimum second moment of area and anatomical orientation as well as H-regions using histological differences within a cross section. We identified inconsistent differences in the studied cross-sectional geometry properties between Lurcher and WT mice. The biggest significant difference between Lurcher and WT mice is found in the number of canaliculi, whereas in the other studied properties are only limited. Lurcher mice exhibit an increased number of canaliculi (p < 0.01) in all studied regions compared with the WT controls. The number of canaliculi is also negatively correlated with the distance from the centroid in the Lurcher and positively correlated in the WT mice. When the Lurcher and WT sample is pooled, the number of canaliculi and lacunar volume is increased in the posterior Imax region, and in addition, midcortical H-region exhibit lower number of canaliculi, lacuna to lacuna distance and increased lacunar volume. Our results indicate, that the importance of precise sample selection within cross sections in future studies is highlighted because of the histological heterogeneity of lacunar-canalicular network properties within the I-region and H-region in the mouse cortical bone.

PTH signaling mediates perilacunar remodeling during exercise

Mechanical loading and release of endogenous parathyroid hormone (PTH) during exercise facilitate the adaptation of bone. However, it remains unclear how exercise and PTH influence the composition of bone and how exercise and PTH-mediated compositional changes influence the mechanical properties of bone. Thus, the primary purpose of this study was to establish compositional changes within osteocytes' perilacunar region of cortical bone following exercise, and evaluate the influence of endogenous PTH signaling on this perilacunar adaptation. Raman spectroscopy, scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS) were used to evaluate tissue composition surrounding individual lacuna within the tibia of 19week old male mice exposed to treadmill running for 3weeks. As a result of exercise, tissue within the perilacunar region (within 0-5μm of the lacuna wall) had a lower mineral-to-matrix ratio (MMR) compared to sedentary controls. In addition, exercise also increased the carbonate-to-phosphate ratio (CPR) across both perilacunar and non-perilacunar regions (5-10μm and 10-15μm from the lacuna walls). Tibial post-yield work had a significant negative correlation with perilacunar MMR. Inhibition of PTH activity with PTH(7-34) demonstrated that perilacunar remodeling during exercise was dependent on the cellular response to endogenous PTH. The osteocytes' response to endogenous PTH during exercise was characterized by a significant reduction in SOST expression and significant increase in FGF-23 expression. The potential reduction in phosphate levels due to FGF-23 expression may explain the increase in carbonate substitution. Overall, this is the first study to demonstrate that adaptation in tissue composition is localized around individual osteocytes, may contribute to the changes in whole bone mechanics during exercise, and that PTH signaling during exercise contributes to these adaptations.

The use of nano-computed tomography to enhance musculoskeletal research

Advances in computed tomography (CT) imaging are opening new avenues toward more precise characterization and quantification of connective tissue microarchitecture. In the last two decades, micro-computed tomography (microCT) has significantly augmented destructive methods for the 3D micro-analysis of tissue structure, primarily in the bone research field. Recently, microCT has been employed in combination with contrast agents to generate contrast-enhanced images of soft tissues that are otherwise difficult to visualize due to their native radiodensity. More recent advances in CT technology have enabled ultra-high resolution imaging by utilizing a more powerful nano-focused X-ray source, such as that found in nano-computed tomography (nanoCT) systems. NanoCT imaging has facilitated the expansion of musculoskeletal research by reducing acquisition time and significantly expanding the range of samples that can be imaged in terms of size, age and tissue-type (bone, muscle, tendon, cartilage, vessels and adipose tissue). We present the application and early results of nanoCT imaging in various tissue types and how this ultra-high resolution imaging modality is capable of characterizing microstructures at levels of details previously not possible. Contrast-enhanced imaging techniques to enable soft-tissue visualization and characterization are also outlined.

Modalities for Visualization of Cortical Bone Remodeling: The Past, Present, and Future

Bone's ability to respond to load-related phenomena and repair microdamage is achieved through the remodeling process, which renews bone by activating groups of cells known as basic multicellular units (BMUs). The products of BMUs, secondary osteons, have been extensively studied via classic two-dimensional techniques, which have provided a wealth of information on how histomorphology relates to skeletal structure and function. Remodeling is critical in maintaining healthy bone tissue; however, in osteoporotic bone, imbalanced resorption results in increased bone fragility and fracture. With increasing life expectancy, such degenerative bone diseases are a growing concern. The three-dimensional (3D) morphology of BMUs and their correlation to function, however, are not well-characterized and little is known about the specific mechanisms that initiate and regulate their activity within cortical bone. We believe a key limitation has been the lack of 3D information about BMU morphology and activity. Thus, this paper reviews methodologies for 3D investigation of cortical bone remodeling and, specifically, structures associated with BMU activity (resorption spaces) and the structures they create (secondary osteons), spanning from histology to modern ex vivo imaging modalities, culminating with the growing potential of in vivo imaging. This collection of papers focuses on the theme of "putting the 'why' back into bone architecture." Remodeling is one of two mechanisms "how" bone structure is dynamically modified and thus an improved 3D understanding of this fundamental process is crucial to ultimately understanding the "why."

Micro- and nano-CT for the study of bone ultrastructure

Micro-computed tomography (micro-CT)-a version of X-ray CT operating at high spatial resolution-has had a considerable success for the investigation of trabecular bone micro-architecture. Currently, there is a lot of interest in exploiting CT techniques at even higher spatial resolutions to assess bone tissue at the cellular scale. After recalling the basic principles of micro-CT, we review the different existing system, based on either standard X-ray tubes or synchrotron sources. Then, we present recent applications of micro- and nano-CT for the analysis of osteocyte lacunae and the lacunar-canalicular network. We also address the question of the quantification of bone ultrastructure to go beyond the sole visualization.

Normal variation in cortical osteocyte lacunar parameters in healthy young males

The most abundant cell in bone, osteocytes form an interconnected system upon which the regulation of healthy bone relies. Although the complete nature of the role of osteocytes has yet to be defined, they are generally accepted to play a part in the sensing of load and the initiation of damage repair. A previous study conducted by our group identified variation of up to 30% in osteocyte lacunar density and morphological parameters between regions of a single cross-section of human femoral shaft; that study, however, was limited to a single individual. The aim of the current study was to determine whether this pattern consistently occurs in healthy young male femora. Anterior, posterior, medial and lateral blocks were prepared from the proximal femoral shaft of seven males and synchrotron radiation micro-CT imaged. Average lacunar densities (± SD) from the anterior, posterior, medial and lateral regions were 23 394 ± 1705, 30 180 ± 4860, 35 946 ± 5990 and 29 678 ± 6081 lacunae per mm(3) of bone tissue, respectively. These values were significantly different between the anterior and both the medial and posterior regions (P < 0.05). The density of the combined anterior and posterior regions was also significantly lower (P = 0.006) than the density of the combined medial and lateral regions. Although no difference was found in predominant orientation, shape differences were found; with the combined anterior-posterior regions having lacunae that were significantly more elongated and less flat than the combined medial-lateral values (P < 0.001). As expected, in this larger study, there was a dramatic difference in lacunar density between the medial and anterior region (up to ~ 54%). The study clearly demonstrates that the high variation seen in osteocyte lacunar density as well as other lacunar parameters, noted in a number of biomechanical, age and pathology studies, are well within the range of normal variation; however, the reasons for and consequences of this variation remain unclear. Lacunar parameters including abundance and shape are being increasingly incorporated into computational modeling of bone biology and this paper represents a more comprehensive description of normal healthy lacunae.

Technique: imaging earliest tooth development in 3D using a silver-based tissue contrast agent

Looking in microscopic detail at the 3D organization of initiating teeth within the embryonic jaw has long-proved technologically challenging because of the radio-translucency of these tiny un-mineralized oral tissues. Yet 3D image data showing changes in the physical relationships among developing tooth and jaw tissues are vital to understand the coordinated morphogenesis of vertebrate teeth and jaws as an animal grows and as species evolve. Here, we present a new synchrotron-based scanning solution to image odontogenesis in 3D and in histological detail using a silver-based contrast agent. We stained fixed, intact wild-type mice aged embryonic (E) day 10 to birth with 1% Protargol-S at 37°C for 12-32 hr. Specimens were scanned at 4-10 µm pixel size at 28 keV, just above the silver K-edge, using micro-computed tomography (µCT) at the Canadian Light Source synchrotron. Synchrotron µCT scans of silver-stained embryos showed even the earliest visible stages of tooth initiation, as well as many other tissue types and structures, in histological detail. Silver stain penetration was optimal for imaging structures in intact embryos E15 and younger. This silver stain method offers a powerful yet straightforward approach to visualize at high-resolution and in 3D the earliest stages of odontogenesis in situ, and demonstrates the important of studying the tooth organ in all three planes of view.

A quantitative framework for the 3D characterization of the osteocyte lacunar system

Assessing the role of osteocyte lacunae and the ways in which they communicate with one another is important for determining the function and viability of bone tissue. Osteocytes are able to play a significant role in bone development and remodeling because they can receive nourishment from, interact with, and communicate with other cells. In this sense the immediate environment of an osteocyte is crucial for understanding its function. Modern imaging techniques, ranging from synchrotron radiation-based computed tomography (SR CT) to confocal laser scanning microscopy, produce large volumes of high-quality imaging data of bone tissue on the micrometer scale in rapidly shortening times. These images often contain tens of thousands of osteocytes and their lacunae, void spaces which enclose the osteocytes. While theoretically possible, quantitative analysis of the osteocyte lacunar system is too time consuming to be practical without highly automated tools. Moreover, quantitative morphometry of the osteocyte lacunar system necessitates clearly defined, robust, and three-dimensional (3D) measures. Here, we introduce a framework for the quantitative characterization of millions of osteocyte lacunae and their spatial relationships in 3D. The metrics complement and expand previous works looking at shape and number density while providing novel measures for quantifying spatial distribution and alignment. We developed model, in silico systems to visualize and validate the metrics and provide a concrete example of the attribute being classified with each metric. We then illustrate the applicability to biological samples in a first study comparing two strains of mice and the effect of growth hormone. We found significant differences in shape and distribution between strains for alignment. The proposed quantitative framework can be used in future studies examining differences and treatment effects in bone microstructure at the cell scale. Furthermore, the proposed strategy for quantitative bone cell morphometry will allow investigating structure-function relationships in bone tissue, for example by linking cellular morphometry to bone remodeling.

Cavities in the compact bone in tetrapods and fish and their effect on mechanical properties

Bone includes cavities in various length scales, from nanoporosities occurring between the collagen fibrils and the mineral crystals all the way to macrocavities like the medullary cavity. In particular, bone is permeated by a vast number of channels (the lacunar-canalicular system), that reduce the stiffness and, more importantly, the strength of the bone that they permeate. These consequences are presumably a price worth paying for the ability of the lacunar-canalicular system to detect changes in the strain environment within the bone material and, when deleterious, to trigger processes like modeling or remodeling which 'rectify' it. Here we review the size and density of the various types of cavities in bone, and discuss their effect on the mechanical properties of cortical bone. In this respect the bones of advanced teleost fish species (probably the majority of all vertebrate species) are an unsolved conundrum because they lack bone cells (and therefore lacunae and canaliculi) in their skeleton. Yet, despite being acellular, some of these fish can undergo considerable remodeling in at least some parts of their skeleton. We address, but do not solve this mystery.