Mechanosensitivity of Cancer Cells in Contact with Soft Substrates Using AFM

Mechanical Analysis of Phellinus Linteus-Induced Apoptosis of Hepatoma Cells

Liver cancer is prevalent with the third highest mortality rate globally. The biomechanical properties of cancer cells play a crucial role in their proliferation and differentiation. Studying the morphological and mechanical properties of individual living cells can be helpful for early diagnosis of cancers. Herein, atomic force microscopy (AFM) was used to investigate the effects of Phellinus linteus on hepatocyte cells (HL-7702) and hepatocellular carcinoma cells (SMCC-7721) in terms of morphological and mechanical changes at the nanoscale. The water extract of Phellinus linteus (PLWE) resulted in increased height and surface roughness of SMCC-7721 cells. Also, the PLWE-treated showed that the average adhesion decreased by 1.69 nN and the average Young's modulus increased by 0.379 kPa. Additionally, the SMCC-7721 cells treated with PLWE showed clearly reduced activity compared with HL-7702 cells. This study suggested that Phellinus Linteus could be a potential candidate for selective anti-cancer therapy, providing a new avenue for the treatment of hepatocellular carcinoma.

Mechanical modulation of docetaxel-treated bladder cancer cells by various changes in cytoskeletal structures

Cytoskeleton targeting agents are a group of chemotherapeutics used in the therapy of many types of cancer, such as breast, prostate, lung, bladder cancer, and others. At the same time, the assessment of the rheological properties of cancer cells is a relevant marker of their metastatic potential and therapeutic efficacy. For these reasons, understanding the interaction between the actin microfilament (MFs) network, microtubules (MTs), and so-called intermediate filaments (IFs) is crucial for the use of the rheological properties of cells as biomechanical markers. The current work compares the rheological properties of bladder cancer cells T24 and 5637, which differ in cytoskeletal composition, treated with a low dose of docetaxel (DTX) - a microtubule targeting agent (MTA). AFM revealed that 5637 cells stiffen over time when exposed to DTX, whereas changes in rheological properties of T24 cells are less pronounced, and both softening and stiffening of cells are observed. From immunostaining and Western blot analysis, we found that in addition to changes in the content and organization of MTs, reorganization of MFs and vimentin IFs also occurs. We show that both cell and nucleus morphology changes after DTX treatment. DTX treatment decreases and increases the migratory potential of 5637 and T24 cells, respectively. The current work shows that vimentin IFs modulate the nanomechanics of bladder cancer cells.

Softness or Stiffness What Contributes to Cancer and Cancer Metastasis?

Beyond the genomic and proteomic analysis of bulk and single cancer cells, a new focus of cancer research is emerging that is based on the mechanical analysis of cancer cells. Therefore, several biophysical techniques have been developed and adapted. The characterization of cancer cells, like human cancer cell lines, started with their mechanical characterization at mostly a single timepoint. A universal hypothesis has been proposed that cancer cells need to be softer to migrate and invade tissues and subsequently metastasize in targeted organs. Thus, the softness of cancer cells has been suggested to serve as a universal physical marker for the malignancy of cancer types. However, it has turned out that there exists the opposite phenomenon, namely that stiffer cancer cells are more migratory and invasive and therefore lead to more metastases. These contradictory results question the universality of the role of softness of cancer cells in the malignant progression of cancers. Another problem is that the various biophysical techniques used can affect the mechanical properties of cancer cells, making it even more difficult to compare the results of different studies. Apart from the instrumentation, the culture and measurement conditions of the cancer cells can influence the mechanical measurements. The review highlights the main advances of the mechanical characterization of cancer cells, discusses the strength and weaknesses of the approaches, and questions whether the passive mechanical characterization of cancer cells is still state-of-the art. Besides the cell models, conditions and biophysical setups, the role of the microenvironment on the mechanical characteristics of cancer cells is presented and debated. Finally, combinatorial approaches to determine the malignant potential of tumors, such as the involvement of the ECM, the cells in a homogeneous or heterogeneous association, or biological multi-omics analyses, together with the dynamic-mechanical analysis of cancer cells, are highlighted as new frontiers of research.

Entanglement of vimentin shapes the microrheological response of suspended-like melanoma WM35 cells to oscillatory strains induced by different AFM probe geometries

Normal and pathological states of cells can be distinguished by their mechanical properties, which are thought to be determined by the organization of the actin network. In the body, cells exist in both adherent and non-adherent (suspended) states, and studies of the rheological properties of spread and suspended cells are needed to gain more insight into their response to strain. Herein, we show that WM35 melanoma cells in adherent and non-adherent states respond differently to oscillatory strain. We used an atomic force microscopy (AFM)-based microrheological approach to study the elasticity and fluidity of the cells, quantified by the storage (G') and loss (G") moduli and the transition frequency fT (G' = G"). Our results show that spread cells are stiffer than the suspended-like cells (plateau shear modulus of 3.51 ± 0.43 kPa vs 2.67 ± 0.34 kPa). We also found, from measurements made with a conical probe, that suspended-like cells are more tolerant to imposed strains. Combining AFM results and fluorescence microscopy of the cytoskeleton, we conclude that the organization and distribution of actin and vimentin within the cell body strongly influence the rheological properties of spread and suspended-like WM35 cells. The data also suggest that phosphorylated vimentin is predominant in suspended-like cells, whereas in spread cells, vimentin intermittent filaments (VIFs) form an assembled network that contributes to higher G'. The entanglement of the disassembled VIFs in suspended-like WM35 cell influences the rheological properties of such cells.

Green chemistry: Modern therapies using nanocarriers for treating rare brain cancer metastasis from colon cancer

Brain metastasis (BM) from colon cancer is associated with a poor prognosis and restricted treatment alternatives, largely due to issues related to blood-brain barrier (BBB) permeability and the negative effects of standard chemotherapy. Nanotechnology improves treatment efficacy by enabling targeted and controlled drug delivery. This review article evaluates the potential of nanotechnology-based therapies for treating colon cancer BM, emphasizing their capacity to cross the BBB, diminish metastatic growth, and enhance overall survival rates. A review of multiple studies evaluated nanoparticles (NPs) as carriers for chemotherapy, focusing on parameters including particle size, surface charge, and drug-loading capacity. The study also reviewed studies that examined BBB penetration, in vitro tumor accumulation, and in vivo tumor growth inhibition. In vitro findings indicated that NPs accumulate more efficiently in BM tissue than in healthy brain tissue and show significant BBB penetration. In vivo, nanotherapy markedly inhibited tumor growth and prolonged survival relative to conventional chemotherapy or control treatments while also exhibiting reduced side effects. Recent studies demonstrated that plant extracts can effectively and safely synthesize nanomaterials, positioning them as a viable and environmentally friendly precursor for nanomaterial production. Nanotechnology-based therapies demonstrate significant potential in the treatment of colon cancer BM by minimizing systemic toxicity, enhancing therapeutic efficacy, and facilitating more targeted drug delivery. Further research is required to confirm these findings and implement them in clinical practice.

Exploiting mechanoregulation via FAK/YAP to overcome platinum resistance in ovarian cancer

Cancer cells mechanically interact with the tumor microenvironment during cancer development. Mechano-reciprocity has emerged as a crucial factor affecting anti-cancer drug resistance during adjuvant therapy. Here, we investigated the focal adhesion kinase (FAK)/Yes-associated protein (YAP) signaling axis as a prospective strategy for circumventing cisplatin resistance in ovarian cancer (OC). The Cancer Genome Atlas (TCGA) data analysis revealed that FAK overexpression significantly correlated with unfavorable clinical outcomes in patients with ovarian cancer. AFM indentation experiments showed that cell elasticity depends on FAK activity. Notably, the combination of FAK inhibition and cisplatin treatment led to a 69 % reduction in the IC50 of cisplatin. This combined treatment also increased apoptosis compared to the individual treatments, along with the upregulation of the pro-apoptotic factor BAX and cleaved PARP. Suppressing FAK expression sequestered YAP in the cytosol, potentially reducing cellular proliferation and promoting apoptosis. Moreover, reduced FAK expression sensitized drug-resistant OC cells to cisplatin treatment owing to a decrease in nuclear tension, allowing the relocation of YAP to the cytosol. In a mouse model, the co-administration of an FAK inhibitor and cisplatin significantly suppressed tumor growth and increased apoptotic events and DNA fragmentation. Our findings suggest that drug resistance can be attributed to the perturbation of mechanosensing signaling pathways, which drive the mechanical reinforcement of cancer cells. OC cells can restore their sensitivity to cisplatin treatment by strategically reducing YAP localization in the nucleus through FAK downregulation.

Substrate stiffness modulates extracellular vesicles' release in a triple-negative breast cancer model

Aim

The microenvironment effect on the tumoral-derived Extracellular Vesicle release, which is of significant interest for biomedical applications, still represents a rather unexplored field. The aim of the present work is to investigate the interrelation between extracellular matrix (ECM) stiffness and the release of small EVs from cancer cells. Here, we focus on the interrelation between the ECM and small extracellular vesicles (sEVs), specifically investigating the unexplored aspect of the influence of ECM stiffness on the release of sEVs.

Methods

We used a well-studied metastatic Triple-Negative Breast Cancer (TNBC) cell line, MDA-MB-231, as a model to study the release of sEVs by cells cultured on substrates of different stiffness. We have grown MDA-MB-231 cells on two collagen-coated polydimethylsiloxane (PDMS) substrates at different stiffness (0.2 and 3.6 MPa), comparing them with a hard glass substrate as control, and then we isolated the respective sEVs by differential ultracentrifugation. After checking the cell growth conditions [vitality, morphology by immunofluorescence microscopy, stiffness by atomic force microscopy (AFM)], we took advantage of a multi-parametric approach based on complementary techniques (AFM, Nanoparticle Tracking Analysis, and asymmetric flow field flow fractionation with a multi-angle light scattering detector) to characterize the TNBC-derived sEV obtained in the different substrate conditions.

Results

We observe that soft substrates induce TNBC cell softening and rounding. This effect promotes the release of a high number of larger sEVs.

Conclusion

Here, we show the role of ECM physical properties in the regulation of sEV release in a TNBC model. While the molecular mechanisms regulating this effect need further investigation, our report represents a step toward an improved understanding of ECM-cell-sEVs crosstalk.

In vivo photoacoustic flow cytometry-based study of the effect of melanin content on melanoma metastasis

A major cause of death in cancer patients is distant metastasis of tumors, in which circulating tumor cells (CTCs) are an important marker. Photoacoustic flow cytometry (PAFC) can monitor CTCs in real time, non-invasively, and label-free; we built a PAFC system and validated the feasibility of PAFC for monitoring CTCs using in vivo animal experiments. By cultivating heavily-pigmented and moderately-pigmented melanoma cells, more CTCs were detected in mice inoculated with moderately-pigmented tumor cells, resulting in more distant metastases and poorer survival status. Tumor cells with lower melanin content may produce more CTCs, increasing the risk of metastasis. CTC melanin content may be down-regulated during the metastatic which may be a potential indicator for assessing the risk of melanoma metastasis. In conclusion, PAFC can be used to assess the risk of melanoma metastasis by dynamically monitoring the number of CTCs and the CTC melanin content in future clinical diagnoses.

Bibliometric analysis of the global research status and trends of mechanotransduction in cancer

BACKGROUND

The development of cancer is thought to involve the dynamic crosstalk between the tumor cells and the microenvironment they inhabit. Such crosstalk is thought to involve mechanotransduction, a process whereby the cells sense mechanical cues such as stiffness, and translate these into biochemical signals, which have an impact on the subsequent cellular activities. Bibliometric analysis is a statistical method that involves investigating different aspects (including authors' names and affiliations, article keywords, journals and citations) of large volumes of literature. Despite an increase in mechanotransduction-related research in recent years, there are currently no bibliometric studies that describe the global status and trends of mechanotransduction-related research in the cancer field.

AIM

To investigate the global research status and trends of mechanotransduction in cancer from a bibliometric viewpoint.

METHODS

Literature on mechanotransduction in cancer published from January 1, 1900 to December 31, 2022 was retrieved from the Web of Science Core Collection. Excel and GraphPad software carried out the statistical analysis of the relevant author, journal, organization, and country information. The co-authorship, keyword co-occurrence, and keyword burst analysis were visualized with VOSviewer and CiteSpace.

RESULTS

Of 597 publications from 745 institutions in 45 countries were published in 268 journals with 35510 citation times. With 270 articles, the United States is a well-established global leader in this field, and the University of California system, the most productive (n = 36) and influential institution (n = 4705 citations), is the most highly active in collaborating with other organizations. Cancers was the most frequent publisher with the highest H-index. The most productive researcher was Valerie M. Weaver, with 10 publications. The combined analysis of concurrent and burst keywords revealed that the future research hotspots of mechanotransduction in cancer were related to the plasma membrane, autophagy, piezo1/2, heterogeneity, cancer diagnosis, and post-transcriptional modifications.

CONCLUSION

Mechanotransduction-related cancer research remains a hot topic. The United States is in the leading position of global research on mechano-oncology after almost 30 years of investigations. Research group cooperations exist but remain largely domestic, lacking cross-national communications. The next big topic in this field is to explore how the plasma membrane and its localized mechanosensor can transduce mechanical force through post-transcriptional modifications and thereby participate in cellular activity regulations and cancer development.

Using Adhesive Micropatterns and AFM to Assess Cancer Cell Morphology and Mechanics

The mechanical properties of living cells reflect their physiological and pathological state. In particular, cancer cells undergo cytoskeletal modifications that typically make them softer than healthy cells, a property that could be used as a diagnostic tool. However, this is challenging because cells are complex structures displaying a broad range of morphologies when cultured in standard 2D culture dishes. Here, we use adhesive micropatterns to impose the cell geometry and thus standardize the mechanics and morphologies of cancer cells, which we measure by atomic force microscopy (AFM), mechanical nanomapping, and membrane nanotube pulling. We show that micropatterning cancer cells leads to distinct morphological and mechanical changes for different cell lines. Micropatterns did not systematically lower the variability in cell elastic modulus distribution. These effects emerge from a variable cell spreading rate associated with differences in the organization of the cytoskeleton, thus providing detailed insights into the structure-mechanics relationship of cancer cells cultured on micropatterns. Combining AFM with micropatterns reveals new mechanical and morphological observables applicable to cancer cells and possibly other cell types.

Characterization of Breast Cancer Aggressiveness by Cell Mechanics

In healthy tissues, cells are in mechanical homeostasis. During cancer progression, this equilibrium is disrupted. Cancer cells alter their mechanical phenotype to a softer and more fluid-like one than that of healthy cells. This is connected to cytoskeletal remodeling, changed adhesion properties, faster cell proliferation and increased cell motility. In this work, we investigated the mechanical properties of breast cancer cells representative of different breast cancer subtypes, using MCF-7, tamoxifen-resistant MCF-7, MCF10A and MDA-MB-231 cells. We derived viscoelastic properties from atomic force microscopy force spectroscopy measurements and showed that the mechanical properties of the cells are associated with cancer cell malignancy. MCF10A are the stiffest and least fluid-like cells, while tamoxifen-resistant MCF-7 cells are the softest ones. MCF-7 and MDA-MB-231 show an intermediate mechanical phenotype. Confocal fluorescence microscopy on cytoskeletal elements shows differences in actin network organization, as well as changes in focal adhesion localization. These findings provide further evidence of distinct changes in the mechanical properties of cancer cells compared to healthy cells and add to the present understanding of the complex alterations involved in tumorigenesis.

Bladder Cancer Cells Interaction with Lectin-Coated Surfaces under Static and Flow Conditions

Aberrant expression of glycans, i.e., oligosaccharide moiety covalently attached to proteins or lipids, is characteristic of various cancers, including urothelial ones. The binding of lectins to glycans is classified as molecular recognition, which makes lectins a strong tool for understanding their role in developing diseases. Here, we present a quantitative approach to tracing glycan-lectin interactions in cells, from the initial to the steady phase of adhesion. The cell adhesion was measured between urothelial cell lines (non-malignant HCV29 and carcinoma HT1376 and T24 cells) and lectin-coated surfaces. Depending on the timescale, single-cell force spectroscopy, and adhesion assays conducted in static and flow conditions were applied. The obtained results reveal that the adhesion of urothelial cells to two specific lectins, i.e., phytohemagglutinin-L and wheat germ agglutinin, was specific and selective. Thus, these lectins can be applied to selectively capture, identify, and differentiate between cancer types in a label-free manner. These results open up the possibility of designing lectin-based biosensors for diagnostic or prognostic purposes and developing strategies for drug delivery that could target cancer-associated glycans.

Insights in Cell Biomechanics through Atomic Force Microscopy

We review the advances obtained by using Atomic Force Microscopy (AFM)-based approaches in the field of cell/tissue mechanics and adhesion, comparing the solutions proposed and critically discussing them. AFM offers a wide range of detectable forces with a high force sensitivity, thus allowing a broad class of biological issues to be addressed. Furthermore, it allows for the accurate control of the probe position during the experiments, providing spatially resolved mechanical maps of the biological samples with subcellular resolution. Nowadays, mechanobiology is recognized as a subject of great relevance in biotechnological and biomedical fields. Focusing on the past decade, we discuss the intriguing issues of cellular mechanosensing, i.e., how cells sense and adapt to their mechanical environment. Next, we examine the relationship between cell mechanical properties and pathological states, focusing on cancer and neurodegenerative diseases. We show how AFM has contributed to the characterization of pathological mechanisms and discuss its role in the development of a new class of diagnostic tools that consider cell mechanics as new tumor biomarkers. Finally, we describe the unique ability of AFM to study cell adhesion, working quantitatively and at the single-cell level. Again, we relate cell adhesion experiments to the study of mechanisms directly or secondarily involved in pathologies.

Nanoindentation study of the viscoelastic properties of human triple negative breast cancer tissues: Implications for mechanical biomarkers

This paper presents the results of a combined experimental and theoretical study of the structure and viscoelastic properties of human non-tumorigenic mammary breast tissues and triple negative breast cancer (TNBC) tissues of different histological grades. A combination of immunofluorescence and confocal microscopy, and atomic force microscopy is used to study the actin cytoskeletal structures of non-tumorigenic and tumorigenic breast tissues (grade I to grade III). A combination of nanoindentation and statistical techniques is then used to measure viscoelastic properties of non-tumorigenic and human TNBC of different histological grades. A Standard Fluid Model/Anti-Zener Model II is also used to characterize the viscoelastic properties of the non-tumorigenic and tumorigenic TNBC tissues of different grades. The implications of the results are discussed for the potential application of nanoindentation and statistical deconvolution techniques to the development of mechanical biomarkers for TNBC detection/cancer diagnosis. STATEMENT OF SIGNIFICANCE: There is increasing interest in the development of mechanical biomarkers for cancer diagnosis. Here, we show that nanoindentation techniques can be used to characterize the viscoelastic properties of normal breast tissue and TNBC tissues of different histological grades. The Standard Fluid Model (Anti-Zener Model II) is used to classify the viscoelastic properties of breast tissues of different TNBC histological grades. Our results suggest that breast tissue and TNBC tissue viscoelastic properties can be used as mechanical biomarkers for the detection of TNBC at different stages.

The Journey of Cancer Cells to the Brain: Challenges and Opportunities

Cancer metastases into the brain constitute one of the most severe, but not uncommon, manifestations of cancer progression. Several factors control how cancer cells interact with the brain to establish metastasis. These factors include mediators of signaling pathways participating in migration, infiltration of the blood-brain barrier, interaction with host cells (e.g., neurons, astrocytes), and the immune system. Development of novel therapies offers a glimpse of hope for increasing the diminutive life expectancy currently forecasted for patients suffering from brain metastasis. However, applying these treatment strategies has not been sufficiently effective. Therefore, there is a need for a better understanding of the metastasis process to uncover novel therapeutic targets. In this review, we follow the journey of various cancer cells from their primary location through the diverse processes that they undergo to colonize the brain. These processes include EMT, intravasation, extravasation, and infiltration of the blood-brain barrier, ending up with colonization and angiogenesis. In each phase, we focus on the pathways engaging molecules that potentially could be drug target candidates.

YAP/TAZ activation predicts clinical outcomes in mesothelioma and is conserved in in vitro model of driver mutations

The Hippo signalling pathway is dysregulated across a wide range of cancer types and, although driver mutations that directly affect the core Hippo components are rare, a handful is found within pleural mesothelioma (PM). PM is a deadly disease of the lining of the lung caused by asbestos exposure. By pooling the largest-scale clinical datasets publicly available, we here interrogate associations between the most prevalent driver mutations within PM and Hippo pathway disruption in patients, while assessing correlations with a variety of clinical markers. This analysis reveals a consistent worse outcome in patients exhibiting transcriptional markers of YAP/TAZ activation, pointing to the potential of leveraging Hippo pathway transcriptional activation status as a metric by which patients may be meaningfully stratified. Preclinical models recapitulating disease are transformative in order to develop new therapeutic strategies. We here establish an isogenic cell-line model of PM, which represents the most frequently mutated genes and which faithfully recapitulates the molecular features of clinical PM. This preclinical model is developed to probe the molecular basis by which the Hippo pathway and key driver mutations affect cancer initiation and progression. Implementing this approach, we reveal the role of NF2 as a mechanosensory component of the Hippo pathway in mesothelial cells. Cellular NF2 loss upon physiological stiffnesses analogous to the tumour niche drive YAP/TAZ-dependent anchorage-independent growth. Consequently, the development and characterisation of this cellular model provide a unique resource to obtain molecular insights into the disease and progress new drug discovery programs together with future stratification of PM patients.

Intrinsic cell rheology drives junction maturation

A fundamental property of higher eukaryotes that underpins their evolutionary success is stable cell-cell cohesion. Yet, how intrinsic cell rheology and stiffness contributes to junction stabilization and maturation is poorly understood. We demonstrate that localized modulation of cell rheology governs the transition of a slack, undulated cell-cell contact (weak adhesion) to a mature, straight junction (optimal adhesion). Cell pairs confined on different geometries have heterogeneous elasticity maps and control their own intrinsic rheology co-ordinately. More compliant cell pairs grown on circles have slack contacts, while stiffer triangular cell pairs favour straight junctions with flanking contractile thin bundles. Counter-intuitively, straighter cell-cell contacts have reduced receptor density and less dynamic junctional actin, suggesting an unusual adaptive mechano-response to stabilize cell-cell adhesion. Our modelling informs that slack junctions arise from failure of circular cell pairs to increase their own intrinsic stiffness and resist the pressures from the neighbouring cell. The inability to form a straight junction can be reversed by increasing mechanical stress artificially on stiffer substrates. Our data inform on the minimal intrinsic rheology to generate a mature junction and provide a springboard towards understanding elements governing tissue-level mechanics.

Mechanical signatures of human colon cancers

Besides the standard parameters used for colorectal cancer (CRC) management, new features are needed in clinical practice to improve progression-free and overall survival. In some cancers, the microenvironment mechanical properties can contribute to cancer progression and metastasis formation, or constitute a physical barrier for drug penetration or immune cell infiltration. These mechanical properties remain poorly known for colon tissues. Using a multidisciplinary approach including clinical data, physics and geostatistics, we characterized the stiffness of healthy and malignant colon specimens. For this purpose, we analyzed a prospective cohort of 18 patients with untreated colon adenocarcinoma using atomic force microscopy to generate micrometer-scale mechanical maps. We characterized the stiffness of normal epithelium samples taken far away or close to the tumor area and selected tumor tissue areas. These data showed that normal epithelium was softer than tumors. In tumors, stroma areas were stiffer than malignant epithelial cell areas. Among the clinical parameters, tumor left location, higher stage, and RAS mutations were associated with increased tissue stiffness. Thus, in patients with CRC, measuring tumor tissue rigidity may have a translational value and an impact on patient care.

Elasticity-associated rebinding rate of molecular bonds between soft elastic media

A quantitative understanding of how cells interact with their extracellular matrix via molecular bonds is fundamental for many important processes in cell biology and engineering. In these interactions, the deformability of cells and matrix are usually comparable with that of the bonds, making their rebinding events globally coupled with the deformation states of whole systems. Unfortunately, this important principle is not realized or adopted in most conventional theoretical models for analyzing cellular adhesions. In this study, we considered a new theoretical model of a cluster of ligand-receptor bonds between two soft elastic bodies, in which the rebinding rates of ligands to receptors are described, by considering the deformation of the overall system under the influence of bond distributions. On the basis of theory of continuum mechanics and statistical mechanics, we obtained an elasticity-associated rebinding rate of open bonds in a closed analytical form that highly depends on the binding states and distributions of all other bonds, as well as on the overall deformation energy stored in the elastic bodies and all closed bonds. On the basis of this elasticity-associated rebinding rate and by performing Monte Carlo simulations, we uncovered new mechanisms underlying the adhesion stability of molecular bond clusters associated with deformable elastic bodies. Moreover, we revealed that the rebinding processes of molecular bonds is not only dependent on interfacial separation but is related to overall energy. This newly proposed rebinding rate may substantially improve our understanding of how cells adapt to their microenvironments by adjusting their mechanical properties through cytoskeleton remodeling.

Efficient deformation mechanisms enable invasive cancer cells to migrate faster in 3D collagen networks

Cancer cell migration is a widely studied topic but has been very often limited to two dimensional motion on various substrates. Indeed, less is known about cancer cell migration in 3D fibrous-extracellular matrix (ECM) including variations of the microenvironment. Here we used 3D time lapse imaging on a confocal microscope and a phase correlation method to follow fiber deformations, as well as cell morphology and live actin distribution during the migration of cancer cells. Different collagen concentrations together with three bladder cancer cell lines were used to investigate the role of the metastatic potential on 3D cell migration characteristics. We found that grade-3 cells (T24 and J82) are characterized by a great diversity of shapes in comparison with grade-2 cells (RT112). Moreover, grade-3 cells with the highest metastatic potential (J82) showed the highest values of migration speeds and diffusivities at low collagen concentration and the greatest sensitivity to collagen concentration. Our results also suggested that the small shape fluctuations of J82 cells are the signature of larger migration velocities. Moreover, the displacement fields generated by J82 cells showed significantly higher fiber displacements as compared to T24 and RT112 cells, regardless of collagen concentration. The analysis of cell movements enhanced the fact that bladder cancer cells were able to exhibit different phenotypes (mesenchymal, amoeboid). Furthermore, the analysis of spatio-temporal migration mechanisms showed that cancer cells are able to push or pull on collagen fibers, therefore producing efficient local collagen deformations in the vicinity of cells. Our results also revealed that dense actin regions are correlated with the largest displacement fields, and this correlation is enhanced for the most invasive J82 cancer cells. Therefore this work opens up new routes to understand cancer cell migration in soft biological networks.

Atomic Force Microscopy for Tumor Research at Cell and Molecule Levels

Tumors have posed a serious threat to human life and health. Researchers can determine whether or not cells are cancerous, whether the cancer cells are invasive or metastatic, and what the effects of drugs are on cancer cells by the physical properties such as hardness, adhesion, and Young's modulus. The atomic force microscope (AFM) has emerged as a key important tool for biomechanics research on tumor cells due to its ability to image and collect force spectroscopy information of biological samples with nano-level spatial resolution and under near-physiological conditions. This article reviews the existing results of the study of cancer cells with AFM. The main foci are the operating principle of AFM and research advances in mechanical property measurement, ultra-microtopography, and molecular recognition of tumor cells, which allows us to outline what we do know it in a systematic way and to summarize and to discuss future directions.

Cell and Tissue Nanomechanics: From Early Development to Carcinogenesis

Cell and tissue nanomechanics, being inspired by progress in high-resolution physical mapping, has recently burst into biomedical research, discovering not only new characteristics of normal and diseased tissues, but also unveiling previously unknown mechanisms of pathological processes. Some parallels can be drawn between early development and carcinogenesis. Early embryogenesis, up to the blastocyst stage, requires a soft microenvironment and internal mechanical signals induced by the contractility of the cortical actomyosin cytoskeleton, stimulating quick cell divisions. During further development from the blastocyst implantation to placenta formation, decidua stiffness is increased ten-fold when compared to non-pregnant endometrium. Organogenesis is mediated by mechanosignaling inspired by intercellular junction formation with the involvement of mechanotransduction from the extracellular matrix (ECM). Carcinogenesis dramatically changes the mechanical properties of cells and their microenvironment, generally reproducing the structural properties and molecular organization of embryonic tissues, but with a higher stiffness of the ECM and higher cellular softness and fluidity. These changes are associated with the complete rearrangement of the entire tissue skeleton involving the ECM, cytoskeleton, and the nuclear scaffold, all integrated with each other in a joint network. The important changes occur in the cancer stem-cell niche responsible for tumor promotion and metastatic growth. We expect that the promising concept based on the natural selection of cancer cells fixing the most invasive phenotypes and genotypes by reciprocal regulation through ECM-mediated nanomechanical feedback loop can be exploited to create new therapeutic strategies for cancer treatment.

The biophysics of cancer: emerging insights from micro- and nanoscale tools

Cancer is a complex and dynamic disease that is aberrant both biologically and physically. There is growing appreciation that physical abnormalities with both cancer cells and their microenvironment that span multiple length scales are important drivers for cancer growth and metastasis. The scope of this review is to highlight the key advancements in micro- and nano-scale tools for delineating the cause and consequences of the aberrant physical properties of tumors. We focus our review on three important physical aspects of cancer: 1) solid mechanical properties, 2) fluid mechanical properties, and 3) mechanical alterations to cancer cells. Beyond posing physical barriers to the delivery of cancer therapeutics, these properties are also known to influence numerous biological processes, including cancer cell invasion and migration leading to metastasis, and response and resistance to therapy. We comment on how micro- and nanoscale tools have transformed our fundamental understanding of the physical dynamics of cancer progression and their potential for bridging towards future applications at the interface of oncology and physical sciences.

Substrate stiffness modulates the viscoelastic properties of MCF-7 cells

Cells sense stiffness of surrounding tissues and adapt their activity, proliferation, motility and mechanical properties based on such interactions. Cells probe the stiffness of the substrate by anchoring and pulling to their surroundings, transmitting force to the extracellular matrix and other cells, and respond to the resistance they sense, mainly through changes in their cytoskeleton. Cancer and other diseases alter stiffness of tissues, and the response of cancer cells to this stiffness can also be affected. In the present study we show that MCF-7 breast cancer cells seeded on polyacrylamide gels have the ability to detect the stiffness of the substrate and alter their mechanical properties in response. MCF-7 cells plated on soft substrates display lower stiffness and viscosity when compared to those seeded on stiffer gels or glass. These differences can be associated with differences in the morphology and cytoskeleton organisation, since cells seeded on soft substrates have a round morphology, while cells seeded on stiffer substrates acquire a flat and spread morphology with formation of actin filaments, similar to that observed when seeded on glass. These findings show that MCF-7 cells can detect the stiffness of the surrounding microenvironment and thus, modify their mechanical properties.

Viscoelastic Properties in Cancer: From Cells to Spheroids

AFM-based rheology methods enable the investigation of the viscoelastic properties of cancer cells. Such properties are known to be essential for cell functions, especially for malignant cells. Here, the relevance of the force modulation method was investigated to characterize the viscoelasticity of bladder cancer cells of various invasiveness on soft substrates, revealing that the rheology parameters are a signature of malignancy. Furthermore, the collagen microenvironment affects the viscoelastic moduli of cancer cell spheroids; thus, collagen serves as a powerful proxy, leading to an increase of the dynamic moduli vs. frequency, as predicted by a double power law model. Taken together, these results shed new light on how cancer cells and tissues adapt their viscoelastic properties depending on their malignancy and the microenvironment. This method could be an attractive way to control their properties in the future, based on the similarity of spheroids with in vivo tumor models.

Tumor cell nuclei soften during transendothelial migration

During cancer metastasis, tumor cells undergo significant deformation in order to traverse through endothelial cell junctions in the walls of blood vessels. As cells pass through narrow gaps, smaller than the nuclear diameter, the spatial configuration of chromatin must change along with the distribution of nuclear enzymes. Nuclear stiffness is an important determinant of the ability of cells to undergo transendothelial migration, yet no studies have been conducted to assess whether tumor cell cytoskeletal or nuclear stiffness changes during this critical process in order to facilitate passage. To address this question, we employed two non-contact methods, Brillouin confocal microscopy (BCM) and confocal reflectance quantitative phase microscopy (QPM), to track the changes in mechanical properties of live, transmigrating tumor cells in an in vitro collagen gel platform. Using these two imaging modalities to study transmigrating MDA-MB-231, A549, and A375 cells, we found that both the cells and their nuclei soften upon extravasation and that the nuclear membranes remain soft for at least 24 h. These new data suggest that tumor cells adjust their mechanical properties in order to facilitate extravasation.

Microwell Array Based Opto-Electrochemical Detections Revealing Co-Adaptation of Rheological Properties and Oxygen Metabolism in Budding Yeast

Microdevices composed of microwell arrays integrating nanoelectrodes (OptoElecWell) are developed to achieve dual high-resolution optical and electrochemical detections on single Saccharomyces cerevisiae yeast cells. Each array consists of 1.6 × 10⁵ microwells measuring 8 µm in diameter and 5 µm height, with a platinum nanoring electrode for in situ electrochemistry, all integrated on a transparent thin wafer for further high-resolution live-cell imaging. After optimizing the filling rate, 32% of cells are effectively trapped within microwells. This allows to analyse S. cerevisiae metabolism associated with basal respiration while simultaneously measuring optically other cellular parameters. In this study, the impact of glucose concentration on respiration and intracellular rheology is focused. It is found that while the oxygen uptake rate decreases with increasing glucose concentration, diffusion of tracer nanoparticles increases. The OptoElecWell-based respiration methodology provides similar results compared to the commercial gold-standard Seahorse XF analyzer, while using 20 times fewer biological samples, paving the way to achieve single cell metabolomics. In addition, it facilitates an optical route to monitor the contents within single cells. The proposed device, in combination with the dual detection analysis, opens up new avenues for measuring cellular metabolism, and relating it to cellular physiological indicators at single cell level.

Rapid viscoelastic changes are a hallmark of early leukocyte activation

To accomplish their critical task of removing infected cells and fighting pathogens, leukocytes activate by forming specialized interfaces with other cells. The physics of this key immunological process are poorly understood, but it is important to understand them because leukocytes have been shown to react to their mechanical environment. Using an innovative micropipette rheometer, we show in three different types of leukocytes that, when stimulated by microbeads mimicking target cells, leukocytes become up to 10 times stiffer and more viscous. These mechanical changes start within seconds after contact and evolve rapidly over minutes. Remarkably, leukocyte elastic and viscous properties evolve in parallel, preserving a well-defined ratio that constitutes a mechanical signature specific to each cell type. Our results indicate that simultaneously tracking both elastic and viscous properties during an active cell process provides a new, to our knowledge, way to investigate cell mechanical processes. Our findings also suggest that dynamic immunomechanical measurements can help discriminate between leukocyte subtypes during activation.

Recent advances in AFM-based biological characterization and applications at multiple levels

Atomic force microscopy (AFM) has found a wide range of bio-applications in the past few decades due to its ability to measure biological samples in natural environments at a high spatial resolution. AFM has become a key platform in biomedical, bioengineering and drug research fields, enabling mechanical and morphological characterization of live biological systems. Hence, we provide a comprehensive review on recent advances in the use of AFM for characterizing the biomechanical properties of multi-scale biological samples, ranging from molecule, cell to tissue levels. First, we present the fundamental principles of AFM and two AFM-based models for the characterization of biomechanical properties of biological samples, covering key AFM devices and AFM bioimaging as well as theoretical models for characterizing the elasticity and viscosity of biomaterials. Then, we elaborate on a series of new experimental findings through analysis of biomechanics. Finally, we discuss the future directions and challenges. It is envisioned that the AFM technique will enable many remarkable discoveries, and will have far-reaching impacts on bio-related studies and applications in the future.

Mechanical Responses of Breast Cancer Cells to Substrates of Varying Stiffness Revealed by Single-Cell Measurements

How cancer cells respond to different mechanical environments remains elusive. Here, we investigated the tension in single focal adhesions of MDA-MB-231 (metastatic breast cancer cells) and MCF-10A (normal human breast cells) cells on substrates of varying stiffness using single-cell measurements. Tension measurements in single focal adhesions using an improved FRET-based tension sensor showed that the tension in focal adhesions of MDA-MB-231 cells increased on stiffer substrates while the tension in MCF-10A cells exhibited no apparent change against the substrate stiffness. Viscoelasticity measurements using magnetic tweezers showed that the power-law exponent of MDA-MB-231 cells decreased on stiffer substrates whereas MCF-10A cells had similar exponents throughout the whole stiffness, indicating that MDA-MB-231 cells change their viscoelasticity on stiffer substrates. Such changes in tension in focal adhesions and viscoelasticity against the substrate stiffness represent an adaptability of cancer cells in mechanical environments, which can facilitate the metastasis of cancer cells to different tissues.

Application of atomic force microscope in diagnosis of single cancer cells

Changes in mechanical properties of cells are closely related to a variety of diseases. As an advanced technology on the micro/nano scale, atomic force microscopy is the most suitable tool for information acquisition of living cells in human body fluids. AFMs are able to measure and characterize the mechanical properties of cells which can be used as effective markers to distinguish between different cell types and cells in different states (benign or cancerous). Therefore, they can be employed to obtain additional information to that obtained via the traditional biochemistry methods for better identifying and diagnosing cancer cells for humans, proposing better treatment methods and prognosis, and unravelling the pathogenesis of the disease. In this report, we review the use of AFMs in cancerous tissues, organs, and cancer cells cultured in vitro to obtain cellular mechanical properties, demonstrate and summarize the results of AFMs in cancer biology, and look forward to possible future applications and the direction of development.

Biomimetic construction of peritoneum to imitate peritoneal metastasis using digital micromirror device-based optical projection lithography

Currently, the mechanisms underlying the peritoneal metastasis of gastric cancer cells and the function of mesothelial cells during this process are unclear, primarily due to the absence of an effective in vitro peritoneal model. In this study, we constructed a biomimetic peritoneal model using a digital micromirror device-based optical projection lithography system. This model enabled the simulation of a damaged peritoneum, which allowed for a comparison of the characteristics of an undamaged peritoneum, such as porosity, mechanical properties, and surface morphology, with those of a damaged peritoneum. Biological inertness and removability of the polyethylene glycol dimethacrylate hydrogel were exploited to fabricate an arrayed heterogeneous interface that imitated a damaged human peritoneum. The porous structure of the peritoneum was achieved by adjusting the ratio of collagen I to gelatin methacryloyl; this structure of the peritoneum might contribute to its shock absorption property. Atomic force microscopy characterization showed that the outermost layers of the model peritoneum and real peritoneum were similar in surface morphology and mechanical properties. Furthermore, we reproduced the process of peritoneal metastasis in vitro. The numbers of gastric cancer cells that adhered to the heterogeneous interface were different, and mesothelial cells played an essential role in peritoneal metastasis. Our findings indicate that this model can be utilized in preclinical drug screening and personalized therapy.

Biological cells and coupled electro-mechanical effects: The role of organelles, microtubules, and nonlocal contributions

Biological cells are exposed to a variety of mechanical loads throughout their life cycles that eventually play an important role in a wide range of cellular processes. The understanding of cell mechanics under the application of external stimuli is important for capturing the nuances of physiological and pathological events. Such critical knowledge will play an increasingly vital role in modern medical therapies such as tissue engineering and regenerative medicine, as well as in the development of new remedial treatments. At present, it is well known that the biological molecules exhibit piezoelectric properties that are of great interest for medical applications ranging from sensing to surgery. In the current study, a coupled electro-mechanical model of a biological cell has been developed to better understand the complex behaviour of biological cells subjected to piezoelectric and flexoelectric properties of their constituent organelles under the application of external forces. Importantly, a more accurate modelling paradigm has been presented to capture the nonlocal flexoelectric effect in addition to the linear piezoelectric effect based on the finite element method. Major cellular organelles considered in the developed computational model of the biological cell are the nucleus, mitochondria, microtubules, cell membrane and cytoplasm. The effects of variations in the applied forces on the intrinsic piezoelectric and flexoelectric contributions to the electro-elastic response have been systematically investigated along with accounting for the variation in the coupling coefficients. In addition, the effect of mechanical degradation of the cytoskeleton on the electro-elastic response has also been quantified. The present studies suggest that flexoelectricity could be a dominant electro-elastic coupling phenomenon, exhibiting electric fields that are four orders of magnitude higher than those generated by piezoelectric effects alone. Further, the output of the coupled electro-mechanical model is significantly dependent on the variation of flexoelectric coefficients. We have found that the mechanical degradation of the cytoskeleton results in the enhancement of both the piezo and flexoelectric responses associated with electro-mechanical coupling. In general, our study provides a framework for more accurate quantification of the mechanical/electrical transduction within the biological cells that can be critical for capturing the complex mechanisms at cellular length scales.

Multiple particle tracking analysis in isolated nuclei reveals the mechanical phenotype of leukemia cells

The nucleus is fundamentally composed by lamina and nuclear membranes that enclose the chromatin, nucleoskeletal components and suspending nucleoplasm. The functional connections of this network integrate external stimuli into cell signals, including physical forces to mechanical responses of the nucleus. Canonically, the morphological characteristics of the nucleus, as shape and size, have served for pathologists to stratify and diagnose cancer patients; however, novel biophysical techniques must exploit physical parameters to improve cancer diagnosis. By using multiple particle tracking (MPT) technique on chromatin granules, we designed a SURF (Speeded Up Robust Features)-based algorithm to study the mechanical properties of isolated nuclei and in living cells. We have determined the apparent shear stiffness, viscosity and optical density of the nucleus, and how the chromatin structure influences on these biophysical values. Moreover, we used our MPT-SURF analysis to study the apparent mechanical properties of isolated nuclei from patients of acute lymphoblastic leukemia. We found that leukemia cells exhibited mechanical differences compared to normal lymphocytes. Interestingly, isolated nuclei from high-risk leukemia cells showed increased viscosity than their counterparts from normal lymphocytes, whilst nuclei from relapsed-patient's cells presented higher density than those from normal lymphocytes or standard- and high-risk leukemia cells. Taken together, here we presented how MPT-SURF analysis of nuclear chromatin granules defines nuclear mechanical phenotypic features, which might be clinically relevant.

Single-Cell Probe Force Studies to Identify Sox2 Overexpression-Promoted Cell Adhesion in MCF7 Breast Cancer Cells

The replacement of the cantilever tip by a living cell in Atomic Force Microscopy (AFM) experiments permits the direct quantification of cell-substrate and cell-cell adhesion forces. This single-cell probe force measurement technique, when complemented by microscopy, allows controlled manipulation of the cell with defined location at the area of interest. In this work, a setup based on two glass half-slides, a non-fouling one with bacterial S-layer protein SbpA from L. sphaericus CMM 2177 and the second with a fibronectin layer, has been employed to measure the adhesion of MCF7 breast cancer cells to fibronectin films (using SbpA as control) and to other cells (symmetric vs. asymmetric systems). The measurements aimed to characterize and compare the adhesion capacities of parental cells and cells overexpressing the embryonic transcription factor Sox2, which have a higher capacity for invasion and are more resistant to endocrine therapy in vivo. Together with the use of fluorescence techniques (epifluorescence, Total Internal Fluorescence Microscopy (TIRF)), the visualization of vinculin and actin distribution in cells in contact with fibronectin surfaces is enabled, facilitating the monitoring and quantification of the formation of adhesion complexes. These findings demonstrate the strength of this combined approach to assess and compare the adhesion properties of cell lines and to illustrate the heterogeneity of adhesive strength found in breast cancer cells.

Biofabrication Strategies and Engineered In Vitro Systems for Vascular Mechanobiology

The vascular system is integral for maintaining organ-specific functions and homeostasis. Dysregulation in vascular architecture and function can lead to various chronic or acute disorders. Investigation of the role of the vascular system in health and disease has been accelerated through the development of tissue-engineered constructs and microphysiological on-chip platforms. These in vitro systems permit studies of biochemical regulation of vascular networks and parenchymal tissue and provide mechanistic insights into the biophysical and hemodynamic forces acting in organ-specific niches. Detailed understanding of these forces and the mechanotransductory pathways involved is necessary to develop preventative and therapeutic strategies targeting the vascular system. This review describes vascular structure and function, the role of hemodynamic forces in maintaining vascular homeostasis, and measurement approaches for cell and tissue level mechanical properties influencing vascular phenomena. State-of-the-art techniques for fabricating in vitro microvascular systems, with varying degrees of biological and engineering complexity, are summarized. Finally, the role of vascular mechanobiology in organ-specific niches and pathophysiological states, and efforts to recapitulate these events using in vitro microphysiological systems, are explored. It is hoped that this review will help readers appreciate the important, but understudied, role of vascular-parenchymal mechanotransduction in health and disease toward developing mechanotherapeutics for treatment strategies.

Conditioning adhesive contacts between the neutrophils and the endotheliocytes by Staphylococcus aureus

We have developed a model for evaluating the integral intercellular interactions in the "endotheliocyte-neutrophil" system and have shown the high variability of adhesion contacts in different donors associated with different expression profiles of neutrophils. Two methods (forсe spectroscopy-spectroscopy and scanning ion-conductance microscopy) showed a decrease in the rigidity of the membrane-cytoskeletal complex of neutrophils under the influence of Staphylococcus aureus 2879 M. Adding this strain to the "endotheliocyte-neutrophil" system caused a statistically significant decrease in the adhesion force and adhesion work, which indicates a change in the expression profile and physicochemical properties of membranes of both types of interacting cells (neutrophils and endotheliocytes).

A biomechanical model for the transendothelial migration of cancer cells

We propose a biomechanical model for the extravasation of a tumor cell (TC) through the endothelium of a blood vessel. Based on prior in vitro observations, we assume that the TC extends a protrusion between adjacent endothelial cells (ECs) that adheres to the basement membrane via focal adhesions (FAs). As the protrusion grows in size and branches out, the actomyosin contraction along the stress fibers (SFs) inside the protrusion pulls the relatively rigid nucleus through the endothelial opening. We model the chemo-mechanics of the SFs and the FAs by following the kinetics of the active myosin motors and high-affinity integrins, subject to mechanical feedback. This is incorporated into a finite-element simulation of the extravasation process, with the contractile force pulling the nucleus of the TC against elastic resistance of the ECs. To account for the interaction between the TC nucleus and the endothelium, we consider two scenarios: solid-solid contact and lubrication by cytosol. The former gives a lower bound for the required contractile force to realize transmigration, while the latter provides a more realistic representation of the process. Using physiologically reasonable parameters, our model shows that the SF and FA ensemble can produce a contractile force on the order of 70 nN, which is sufficient to deform the ECs and enable transmigration. Furthermore, we use an atomic force microscope to measure the resistant force on a human bladder cancer cell that is pushed through an endothelium cultured in vitro. The magnitude of the required force turns out to be in the range of 70-100 nN, comparable to the model predictions.

Direct evidence that tumor cells soften when navigating confined spaces

The mechanical properties of cells strongly regulate many physiological and pathological processes. For example, in cancer, invasive and metastatic tumor cells have often been reported to be softer than nontumor cells, raising speculation that cancer cells might adaptively soften to facilitate migration through narrow tissue spaces. Despite growing interest in targeting cell softening to impede invasion and metastasis, it remains to be directly demonstrated that tumor cells soften as they migrate through confined spaces. Here, we address this open question by combining topographically patterned substrates with atomic force microscopy (AFM). Using a polydimethylsiloxane open-roof microdevice featuring tapered, fibronectin-coated channels, we followed the migration of U2OS cells through various stages of confinement while simultaneously performing AFM indentation. As cells progress from unconfined migration to fully confined migration, cells soften and exclude Yes-associated protein from the nucleus. Superresolution imaging reveals that confinement induces remodeling of actomyosin stress fiber architecture. Companion studies with flat one-dimensional microlines indicate that the changes in cytoarchitecture and mechanics are intrinsically driven by topographical confinement rather than changes in cellular aspect ratio. Our studies represent among the most direct evidence to date that tumor cells soften during confined migration and support cell softening as a mechanoadaptive mechanism during invasion.

Cell engineering: Biophysical regulation of the nucleus

Cells live in a complex and dynamic microenvironment, and a variety of microenvironmental cues can regulate cell behavior. In addition to biochemical signals, biophysical cues can induce not only immediate intracellular responses, but also long-term effects on phenotypic changes such as stem cell differentiation, immune cell activation and somatic cell reprogramming. Cells respond to mechanical stimuli via an outside-in and inside-out feedback loop, and the cell nucleus plays an important role in this process. The mechanical properties of the nucleus can directly or indirectly modulate mechanotransduction, and the physical coupling of the cell nucleus with the cytoskeleton can affect chromatin structure and regulate the epigenetic state, gene expression and cell function. In this review, we will highlight the recent progress in nuclear biomechanics and mechanobiology in the context of cell engineering, tissue remodeling and disease development.

Stiffness Sensing by Cells

Physical stimuli are essential for the function of eukaryotic cells, and changes in physical signals are important elements in normal tissue development as well as in disease initiation and progression. The complexity of physical stimuli and the cellular signals they initiate are as complex as those triggered by chemical signals. One of the most important, and the focus of this review, is the effect of substrate mechanical properties on cell structure and function. The past decade has produced a nearly exponentially increasing number of mechanobiological studies to define how substrate stiffness alters cell biology using both purified systems and intact tissues. Here we attempt to identify common features of mechanosensing in different systems while also highlighting the numerous informative exceptions to what in early studies appeared to be simple rules by which cells respond to mechanical stresses.

Role of a Kinesin Motor in Cancer Cell Mechanics

Molecular motors play important roles in force generation, migration, and intracellular trafficking. Changes in specific motor activities are altered in numerous diseases. KIF20A, a motor protein of the kinesin-6 family, is overexpressed in bladder cancer, and KIF20A levels correlate negatively with clinical outcomes. We report here a new role for the KIF20A kinesin motor protein in intracellular mechanics. Using optical tweezers to probe intracellular mechanics and surface AFM to probe cortical mechanics, we first confirm that bladder urothelial cells soften with an increasing cancer grade. We then show that inhibiting KIF20A makes the intracellular environment softer for both high- and low-grade bladder cancer cells. Upon inhibition of KIF20A, cortical stiffness also decreases in lower grade cells, while it surprisingly increases in higher grade malignant cells. Changes in cortical stiffness correlate with the interaction of KIF20A with myosin IIA. Moreover, KIF20A inhibition negatively regulates bladder cancer cell motility irrespective of the underlying substrate stiffness. Our results reveal a central role for a microtubule motor in cell mechanics and migration in the context of bladder cancer.

Quantifying the Local Mechanical Properties of Cells in a Fibrous Three-Dimensional Microenvironment

Measurements of the mechanical response of biological cells are critical for understanding injury and disease, for developing diagnostic tools, and for computational models in mechanobiology. Although it is well known that cells are sensitive to the topography of their microenvironment, the current paradigm in mechanical testing of adherent cells is mostly limited to specimens grown on flat two-dimensional substrates. In this study, we introduce a technique in which cellular indentation via optical trapping is performed on cells at a high spatial resolution to obtain their regional mechanical properties while they exist in a more favorable three-dimensional microenvironment. We combine our approach with nonlinear contact mechanics theory to consider the effects of a large deformation. This allows us to probe length scales that are relevant for obtaining overall cell stiffness values. The experimental results herein provide the hyperelastic material properties at both high (∼100 s^-1) and low (∼1-10 s^-1) strain rates of murine central nervous system glial cells. The limitations due to possible misalignment of the indenter in the three-dimensional space are examined using a computational model.

The comparison between force volume and peakforce quantitative nanomechanical mode of atomic force microscope in detecting cell's mechanical properties

Atomic force microscope (AFM) has been widely used in the biological field owing to its high sensitivity (subnanonewton), high spatial resolution (nanometer), and adaptability to physiological environments. Nowadays, force volume (FV) and peakforce quantitative nanomechanical (QNM) are two distinct modes of AFM used in biomechanical research. However, numerous studies have revealed an extremely confusing phenomenon that FV mode has a significant difference with QNM in determining the mechanical properties of the same samples. In this article, for the case of human benign prostatic hyperplasia cells (BPH) and two cancerous prostate cells with different grades of malignancy (PC3 and DU145), the differences were compared between FV and QNM modes in detecting mechanical properties. The results show measured Young's modulus of the same cells in FV mode was much lower than that obtained by QNM mode. Combining experimental results with working principles of two modes, it is indicated that surface adhesion is highly suspected to be a critical factor resulting in the measurement difference between two modes. To further confirm this conjecture, various weight ratios of polydimethylsiloxane (PDMS) were assessed by two modes, respectively. The results show that the difference of Young's modulus measured by two modes increases with the surface adhesion of PDMS, confirming that adhesion is one of the significant elements that lead to the measurement difference between FV and QNM modes.

Melanin presence inhibits melanoma cell spread in mice in a unique mechanical fashion

Melanoma is a highly aggressive cancer that exhibits metastasis to various critical organs. Unlike any other cancer cells, melanoma cells can synthesize melanin in large amounts, becoming heavily pigmented. Until now the role of melanin in melanoma, particularly the effect of melanin presence on the abilities of melanoma cells to spread and metastasize remains unknown. Recently, we have shown that melanin dramatically modified elastic properties of melanoma cells and inhibited the cells invasive abilities in vitro. Here, we inoculated human melanoma cells with different melanin content into nude mice and tested the hypothesis that cell elasticity is an important property of cancer cells for their efficient spread in vivo. The obtained results clearly showed that cells containing melanin were less capable to spread in mice than cells without the pigment. Our findings indicate that the presence of melanin inhibits melanoma metastasis, emphasizing possible clinical implications of such an inhibitory effect.