Optimization of ultrasonic-assisted extraction of water-soluble polysaccharides from Boletus edulis mycelia using response surface methodology

Advanced insights into mushroom polysaccharides: Extraction methods, structure-activity, prebiotic properties, and health-promoting effects

Mushroom-derived polysaccharides, especially β-glucans, have attracted considerable attention because of their various biological regulatory functions. Advanced extraction technologies, including ultrasonic-assisted, microwave-assisted, enzyme-assisted, ultrasonic-microwave synergistic, subcritical water, and aqueous two-phase extractions, are extensively utilized to optimize the efficient recovery of biologically active compounds from mushrooms, progressively supplanting conventional methods. In addition, mushroom polysaccharides are acknowledged as "important biological response modifiers." Beyond their diverse bioactivities, including anticancer, immunomodulatory, anti-inflammatory, antimicrobial, antiviral, antidiabetic, hypocholesterolemia, anti-lipidemic, and antioxidant effects, increasing interest has been directed towards their prebiotic potential, especially regarding their ability to influence gut microbiota. This review presents a comprehensive summary of the extraction and purification methods, biological properties, structure-function relationships, and mechanisms of mushroom polysaccharides, highlighting the latest advancements in the field from 2019 to 2024. Additionally, this review discusses the key findings and limitations associated with the structure-function correlation. While most studies focus on β-glucans or their extracts, α-glucans and chitin have gained increasing attention. The prebiotic potential is associated with α-glucans and chitin, with chitin recognized for its substantial antimicrobial and wound-healing properties. This review systematically identifies current research gaps and proposes avenues for future investigation into the therapeutic potential of mushroom polysaccharides. However, further research is required to comprehensively understand their full therapeutic potential.

Role of a low-molecular-weight polysaccharide from Boletus edulis Bull: Fr. in modulating gut microbiota and metabolic disorders

This study aimed to investigate the effects of Boletus edulis Bull: Fr. polysaccharide (BEP), extracted using a deep eutectic solvent based on l-lactic acid and glycine, on glucose and lipid metabolism in high-fat diet (HFD)-fed mice. The primary mechanism by which BEP improves symptoms of glucose and lipid imbalances involves the modulation of gut microbiota. Key beneficial bacteria, including S24-7, Lachnospiraceae, [Prevotella], and Lactobacillus, were significantly enriched in the intestines of BEP-treated mice, with abundances 2.48-, 1.62-, 6.33- and 2.60-fold higher, respectively, compared to the HFD group. In contrast, the abundance of harmful bacteria, particularly Desulfovibrio, was reduced by 1.81-fold. These microbial shifts contributed to the alleviation of intestinal mucus layer damage and a 50 % reduction in serum lipopolysaccharide (LPS) levels, a key driver of systemic inflammation, compared to the HFD group. As a result, BEP effectively inhibited LPS-induced activation of the hepatic TLR4/Myd88/MAPK signaling pathway, thereby normalizing the expression of proteins related to glucose and lipid metabolism. A fecal microbiota transplantation study further demonstrated that the gut microbiota changes induced by BEP were central to its anti-metabolic syndrome effects. Overall, BEP may serve as a dietary supplement for preventing and treating diet-induced metabolism disorders by targeting the gut microbiota.

A new perspective to explore the bioactive ingredients of honeysuckle tea infusion by structure, function and stability characterization of self-assembled nano/microaggregates

The self-assembled nano/microaggregates formed by the interaction of polyphenols and polysaccharide are key bioactive ingredients in substitute tea infusions, but lack in-depth investigation. Taking honeysuckle tea infusion as a mode infusion, the self-assembled nano/microaggregates were characterized as compact advanced spherical submicroparticles with a particle size of about 155 nm and composed of 47.75 % esterification pectin, 6.53 % of 20 kinds of small molecular substances (mainly phenolic acids and flavonoids) and a small amount of protein at 3.49 % through hydrogen bonding and hydrophobic interaction. The submicroparticles exhibited 1.03 and 1.25 times greater ABTS+ scavenging activity than honeysuckle tea and particle-deficient tea infusion, respectively. During productive and storage processes, the submiroparticles showed notable stability under diverse external physical and chemical conditions. The submicroparticles were verified as the key bioactive ingredients in honeysuckle tea infusion, contributing greatly to its antioxidant activity and stability. This study provided a new perspective for the bioactive ingredients in plant-based beverages.

Isolation, structures, bioactivities, and applications of the polysaccharides from Boletus spp.: A review

Boletus spp., the edible mushrooms distributed in Europe, Asia, and North America, have been widely used as food and medicinal ingredients worldwide. Bioactive polysaccharides are highly abundant in Boletus spp., as demonstrated by modern phytochemical studies. The isolation, chemical properties, and bioactivities of polysaccharides from Boletus spp. have long been attracted by academics worldwide. However, there is still a lack of systematic tracking of research progress on Boletus polysaccharides (BPs), which is essential for researchers to understand their potential and gain a deeper insight into their functional mechanisms. In this review, we summarized the recent development of BPs, including the extraction and purification methods, physiochemical and structural features, bioactivities and functional mechanisms, the structure-activity relationship, and the potential applications. This review aims to provide researchers with a comprehensive understanding of the current progress and potential of BPs to assist their further investigations.

Techno-functional, physicochemical and thermal characteristics of black chickpeas aquafaba under ultrasound pre-processing

Aquafaba is the liquid that remains from the cooking of beans in the canning industry, generally discarded as wastewater. This research aimed to optimize ultrasound pretreatment to enhance this by-product and introduce it as a high-added value product (known as liquid gold) in the food industry. The results showed that with the increase in the sonication time and amplitude, the extraction efficiency, soluble protein content, the density, and dry matter content of black chickpeas aquafaba increased significantly (p < 0.05). The results also demonstrated that foaming ability (in short ultrasonication times) and foam stability significantly increased with higher amplitude. The results of numerical optimization showed that ultrasound pre-treatment for 30 min with an amplitude of 72 % on black chickpeas before the cooking process created the best conditions for aquafaba extraction. Under these optimized conditions, the results yielded the highest values so that extraction efficiency, protein content, density, dry matter, foaming ability, and foam stability were 212.07 %, 3546.7 mg/kg, 1.038 g/mL, 4.76 %, 243.57 %, and 44.50 % respectively. Thermogravimetric and FT-IR analysis showed that the pre-sonication process not only makes aquafaba thermally stable, but also does not cause any structural changes in its chemical components. According to the favorable physicochemical characteristics of aquafaba, this product can benefit the food industry. It can be a material with high added value, profitable for the canning industry.

Extraction of Lentinus Edodes Polysaccharides with Ultrasound Enhanced with Deep Eutectic Solvent and Their Structural Characterization and Antioxidant Activity

Ultrasound extraction (UE) enhanced with deep eutectic solvent (DES) was used to extract Lentinus edodes polysaccharides. Box-Behnken design (BBD) was applied to investigate the influences of water content (10-90 %), solid-liquid solvent (1 : 10-1 : 50 g/mL), time (4-12 min), temperature (40-80 °C) and ultrasonic power (100-500 W) on the yield of Lentinus edodes polysaccharides. The optimal extraction conditions were ultrasonic power of 300 W, extraction time of 8 min, water content of 80 %, a solid-liquid ratio of 1 : 30 g/mL and a temperature of 60 °C, respectively. The highest extraction yield of Lentinus edodes polysaccharide was 10.17 % under optimal conditions. The results of FT-IR, SEM, and monosaccharide composition confirmed that the extracts possessed the characteristics of polysaccharides. In addition, the polysaccharides obtained with the UE enhanced with DES method exhibited higher antioxidant activities than the polysaccharides extracted with the UE method and HWE method. This extraction method can further expand the production efficiency and structural diversity of Lentinus edodes polysaccharides and meet the supply and demand relationship. It can be foreseen that this method can be applied to the extraction of more active substances.

Impacts of microwave-assisted extraction parameters on total phenolic compounds yield from Algerian Moringa oleifera leaves, using response surface methodology

The study aimed to optimise the microwave-assisted extraction (MAE) of total phenolic compounds (TPC) from Moringa oleifera Lam. leaves using response surface methodology (RSM) and Box-Behnken designs (BBD). Factors such as ethanol concentration, microwave power, irradiation time, and solvent to solid ratio were assessed in single-factor tests. Under optimal extraction conditions (48.86% ethanol, 626.53 W microwave power, 99.48 s irradiation, 29.67 mL/g solvent to solid ratio and 21.12 W/mL power density), TPC was 58.45 ± 0.68 mg GAE/g DW, close to the predicted 59.78 ± 1.47 mg GAE/g DW. The MAE method outperformed maceration extraction (8.41 ± 0.25 mg GAE/g DW) and decoction extraction (38.74 ± 0.81 mg GAE/g DW) in terms of extraction time, solvent use, and efficiency. The optimised extract exhibited significant antioxidant activity with IC50 values of 0.294 ± 0.004 mg/mL (DPPH) and 0.425 ± 0.005 mg/mL (ABTS), confirming the efficacy of MAE in preparing antioxidant-rich plant extracts.

Review of isolation, purification, structural characteristics and bioactivities of polysaccharides from Portulaca oleracea L

Portulaca oleracea L., also known as purslane, affiliates to the Portulacaceae family. It is an herbaceous succulent annual plant distributed worldwide. P. oleracea L. is renowned for its nutritional value and medicinal value, which has been utilized for thousands of years as Traditional Chinese Medicine (TCM). The extract derived from P. oleracea L. has shown efficacy in treating various diseases, including intestinal dysfunction and inflammation. Polysaccharides from P. oleracea L. (POP) are the primary constituents of the crude extract which have been found to have various biological activities, including antioxidant, antitumor, immune-stimulating, and intestinal protective effects. While many publications have highlighted on the structural identification and bioactivity evaluation of POP, the underlying structure-activity relationship of POP still remains unclear. In view of this, this review aims to focus on the extraction, purification, structural features and bioactivities of POP. In addition, the potential structure-activity relationship and the developmental perspective for future research of POP were also explored and discussed. The current review would provide a valuable research foundation and the up-to-date information for the future development and application of POP in the field of the functional foods and medicine.

A Review of Development and Utilization for Edible Fungal Polysaccharides: Extraction, Chemical Characteristics, and Bioactivities

Edible fungi, commonly known as mushrooms, are precious medicinal and edible homologous gifts from nature to us. Because of their distinctive flavor and exceptional nutritional and medicinal value, they have been a frequent visitor to people’s dining tables and have become a hot star in the healthcare, pharmaceutical, and cosmetics industries. Edible fungal polysaccharides (EFPs) are an essential nutrient for edible fungi to exert bioactivity. They have attracted much attention because of their antioxidant, immunomodulatory, antitumor, hypoglycemic, and hypolipidemic bioactivities. As a result, EFPs have demonstrated outstanding potential over the past few decades in various disciplines, including molecular biology, immunology, biotechnology, and pharmaceutical chemistry. However, the complexity of EFPs and the significant impact of mushroom variety and extraction techniques on their bioactivities prevents a complete investigation of their biological features. Therefore, the authors of this paper thoroughly reviewed the comparison of different extraction methods of EFPs and their advantages and disadvantages. In addition, the molecular weight, monosaccharide composition, and glycosidic bond type and backbone structure of EFPs are described in detail. Moreover, the in vitro and in vivo bioactivities of EFPs extracted by different methods and their potential regulatory mechanisms are summarized. These provide a valuable reference for improving the extraction process of EFPs and their production and development in the pharmaceutical field.

Extraction and Purification of Inulin from Jerusalem Artichoke with Response Surface Method and Ion Exchange Resins

Inulin is used as an important food ingredient, widely used for its fiber content. In this study the operational extraction variables to obtain higher yields of inulin from Jerusalem artichoke tubers, as well as the optimal conditions, were studied. Response surface methodology and Box-Behnken design were used for optimization of extraction steps. The optimal extraction conditions were as follows: extraction temperature 74 °C, extraction time 65 min, and ratio of liquid to solid 4 mL/g. Furthermore, series connection of ion-exchange resins were used to purify the extraction solution where the optimal resin combinations were D202 strongly alkaline anion resin, HD-8 strongly acidic cation resin, and D315 weakly alkaline resin while the decolorization rate and decreased salinity reached 99.76 and 93.68, respectively. Under these conditions, the yield of inulin was 85.4 ± 0.5%.

Optimization of the Ultrasonic-Assisted Extraction Technology of Steroidal Saponins from Polygonatum kingianum Collett & Hemsl and Evaluating Its Quality Planted in Different Areas

Polygonatum kingianum Collett & Hemsl is one of the famous traditional Chinese herbs with satisfactory therapeutic effects on invigorating Qi, nourishing Yin and moistening lungs, in which steroidal saponins are one class of important active substances. The main purpose is to determine the optimal extraction technology of steroidal saponins and evaluate the quality of P. kingianum planted in five different areas. The optimal ultrasonic-assisted extraction (UAE) technology was established by using single-factor experiments and the response surface methodology (RSM), and the determination method of high-performance liquid chromatography (HPLC) for dioscin and diosgenin, two primary types of acid-hydrolyzed steroidal saponins, was constructed with good linear range and precision. The results showed that UAE was an efficient extraction method for steroidal saponins, and the extraction yield was significantly affected by the liquid-solid ratio. The optimal extraction technology was generated following a liquid-solid ratio of 10:1 (mL/g), an ethanol concentration of 85% (v/v), an extraction time of 75 min, an extraction temperature of 50 °C and three extractions, of which these parameters were in line with the predicted values calculated by RSM. Considering only dioscin and diosgenin, the quality of P. kingianum planted at five sample plots presented non-significant difference. However, the content of diosgenin in Pingbian Prefecture (PB) was higher than that of the other four areas with a value of 0.46 mg/g. Taken together, the optimal UAE technology for P. kingianum steroidal saponins was determined via RSM. The quality evaluation revealed that there was a non-significant difference among P. kingianum planted in different areas based on the contents of the sum of dioscin and diosgenin. This work has important reference value for the exploitation and utilization of P. kingianum.

Microwave-Assisted Extraction of Phenolic Compounds from Spent Coffee Grounds. Process Optimization Applying Design of Experiments

In this study, sustainable technology microwave-assisted extraction (MAE) in association with green solvents was applied to recover phenolic compounds from spent coffee grounds (SCGs). A design of experiments (DOE) was used for process optimization. Initially, a 2⁴⁻¹ two level Fractional Factorial Design was used and ratios “solvent to solute” and “ethanol to water” were identified as the significant experimental factors. Consequently, Central Composite Design (CCD) was applied to analyze the effects of the significant variables on the response yield, total polyphenols content (TPC), and antioxidant activity (AA) by the DPPH assay method, and quadratic surfaces to optimize those responses were generated. The values of the significant factors of 16.7 (solvent/solute) and 68.9% (ethanol/water) were optimized simultaneously the yield (%) at 6.98 ± 0.27, TPC (mg GAE/g) at 117.7 ± 6.1, and AA (µmol TE/g) at 143.8 ± 8.6 and were in excellent agreement with those predicted from the CCD model. The variations of the compositions of the lipids, caffeine, pentacyclic diterpenes, and FAME as a function of the dominant factor % ethanol in the solvent mixture were analyzed by applying NMR and GC-FID, and the results obtained confirmed their determinative significance.

In situ measurement of an emerging persistent, mobile and toxic (PMT) substance - Melamine and related triazines in waters by diffusive gradient in thin-films

Melamine has received increasing public attention as a persistent, mobile and toxic (PMT) substance. To better assess environmental exposure and risks of melamine and related triazines (cyromazine, ammeline, and atrazine), a new passive sampling method based on the diffusive gradients in thin films (DGT) technique has been developed and validated in this study. The studied triazines were adsorbed quickly and strongly by the selected mixed cation exchange (MCX) binding gels. This MCX-DGT can linearly accumulate these chemicals over at least 5 days, with neither significant individual influence from pH (6-8), ionic strength (0.01-0.5 M) or dissolved organic matter (0-10 M), or interaction effects. Field applications in Southern China showed that DGT performed well in both sewage treatment plant (STP) and river samples. Melamine was found to be the dominant triazine with the concentrations at μg·L^-1 in the STP and receiving river. Surprisingly, much higher concentration of melanine was found in the STP effluent than influent, and appeared to be some of the highest concentrations reported in STPs worldwide to date. Comparable melamine and atrazine concentraions in the STP effluent and receiving river suggested other sources to the river. The MCX-DGT sampler developed here was demonstrated to be reliable and robust for measuring the triazines in waters, and is promising as an in situ tool in understanding the occurrence, sources, and fate of the emerging PMT substances in aquatic environment.

Influence of ultrasonic waves and conventional extraction methods on phenolic compound yield and phytochemical composition from Punica granatum L. peel

The objective of this work is to extract phenolic compounds from Punica granatum L. peel and to optimize the process variables. In this study, extraction was carried out using soxhlet, solvent and ultrasound-assisted extraction. Soxhlet extraction of phenolic compounds were reported as 87.31 mg GAE/g dW TPC, 70.30 mg RUE/g dW TFC and 98.68 mg CE/g dW TAC. Solvent extraction found 56.99 mg GAE/g dW, 42.93 mg RUE/g dW and 64.13 mg CE/g dW, while for ultrasonic-assisted extraction it was 77.23 mg GAE/g dW, 62.55 mg RUE/g dW and 91.40 mg CE/g dW of total phenolic content, total flavonoid content and total amount of anthocyanin content, respectively. The presence of phytochemicals was identified using GC-MS and it was found that the extracts contained high amount of trans-13-Octadecenoic acid which is a cancer preventive compound. Scanning electron microscope analysis was used to study the effect of ultrasound on the surface of the sample and understand the morphological changes.

Preparation Optimization, Characterization, and Antioxidant and Prebiotic Activities of Carboxymethylated Polysaccharides from Jujube

In this study, jujube polysaccharides (JP) were extracted from Jinsixiaozao, and carboxymethylated jujube polysaccharides (CMJP) were prepared. The optimum carboxymethylation conditions optimized by Response Surface Methodology (RSM) were as follows: the reaction temperature was 60°C, the concentration of sodium hydroxide (NaOH) solution was 2.8 mol/L, and the content of chloroacetic acid was 2.12% with a degree of substitution (DS) of 0.2275 ± 0.0108. Physicochemical characterizations and in vitro antioxidant and prebiotic activities of JP and CMJP were evaluated. Compared with unmodified JP, water solubility and viscosity were improved in CMJP. Chemical analysis revealed that CMJP was composed of Rha: Ara: Xyl: Glc: Gal = 0.18 : 9.09 : 0.45 : 0.36 : 0.98 with a molecular weight of 3.04 × 105 Da. The signals of carboxymethyl were observed at 1600, 1420, and 1328 cm−1 in FT-IR. In addition, CMJP showed obviously strong hydroxyl radical scavenging ability compared with JP and also exhibited stronger abilities than JP on the proliferation growth of Lactobacillus acidophilus, Lactobacillus plantarum, and Lactobacillus rhamnosus strains. These results indicated that CMJP could be explored as a promising resource for the development of functional foods.

Fermentation of Pleurotus ostreatus and Ganoderma lucidum mushrooms and their extracts by the gut microbiota of healthy and osteopenic women: potential prebiotic effect and impact of mushroom fermentation products on human osteoblasts

Recent data have highlighted the role of the gut microbiota and its several metabolites in maintaining bone health. Thus, gut microbiota manipulation, e.g., by prebiotics, might offer a plausible target in the fight against bone degenerative diseases. This study aimed (a) to investigate the in vitro prebiotic potential of Ganoderma lucidum and Pleurotus ostreatus mushrooms in healthy and osteopenic women and (b) to explore the impact of mushroom fermentation products on human osteoblasts. G. lucidum LGAM 9720 and P. ostreatus IK 1123 lyophilized mushroom-powders (2% w/v) and their hot-water extracts (1% w/v) were fermented in a 24 h static batch culture model by using faecal inocula from healthy (n = 3) or osteopenic (n = 3) donors. Gut microbiota analysis (qPCR) and measurement of short chain fatty acids (SCFAs) were performed during fermentation, and 24 h-prebiotic indexes were calculated. Evaluation of the effects of fermentation products on bone metabolism parameters (OPG: osteoprotegerin; and RANKL: receptor activator of nuclear factor kappa B ligand) in osteoblast cultures was also performed. Our data suggest that the origin of the gut microbiota inoculum plays a major role in the viability of osteoblasts. The treatments using P. ostreatus mushroom-powder and G. lucidum mushroom-extract had positive effects based on gut microbiota and SCFA analyses. Both mushrooms exhibited lower RANKL levels compared to controls, whereas their extracts tended to enhance the osteoblastic activity. In conclusion, mushrooms that are rich in beta-glucans may exert beneficial in vitro effects on bone physiology by alterations in the gut microbiota and/or SCFA production.

Plants arabinogalactans: From structures to physico-chemical and biological properties

Arabinogalactans (AGs) are plant heteropolysaccharides with complex structures occasionally attached to proteins (AGPs). AGs in cell matrix of different parts of plant are freely available or chemically bound to pectin rhamnogalactan. Type I with predominantly β-d-(1 → 4)-galactan and type II with β-d-(1 → 3) and/or (1 → 6)-galactan structural backbones construct the two main groups of AGs. In the current review, the chemical structure of AGs is firstly discussed focusing on non-traditional plant sources and not including well known industrial gums. After that, processes for their extraction and purification are considered and finally their techno-functional and biological properties are highlighted. The role of AG structure and function on health advantages such as anti-tumor, antioxidant, anti-ulcer- anti-diabetic and other activites and also the immunomodulatory effects on in-vivo model systems are overviewed.

Progress in ultrasound-assisted extraction of the value-added products from microorganisms

Extracting value-added products from microorganisms is an important research focus for the future. Among the many extraction methods, ultrasound-assisted extraction (UAE) has attracted more attention owing to its advantages in reducing working time, increasing yield, and improving the quality of the extract. This review summarizes the use of UAE value-added products from microorganisms, with the main extracted substances are pigments, lipids, polysaccharides, and proteins. In addition, this work also summarizes the mechanism of UAE and highlights the factors that affect UAE operation, such as ultrasonic power intensity or power density, operation mode, and energy consumption, which need to be considered. All extraction products from microorganisms showed that UAE can effectively improve the extraction yields of value-added products. It also highlights the existing problems of the technology and possible future prospects. In general, the UAE of value-added substances from microorganisms is feasible and has the potential for development.

A novel acid polysaccharide from Boletus edulis: extraction, characteristics and antitumor activities in vitro

A novel cold-water-soluble polysaccharide (BEP), with a molecular weight of 6.0 × 10⁶ Da, was isolated from Boletus edulis. BEP consists of galactose, glucose, xylose, mannose, glucuronic, and galacturonic acid in a ratio of 0.34:0.28:0.28:2.57:1.00:0.44. The IR results showed that BEP was an acid polysaccharide, containing α-type and β-type glucoside bonds. MTT assay showed BEP could inhibit cell proliferation significantly. Morphological observation demonstrated that BEP-treated MDA-MB-231 and Ca761 cells exhibited typical apoptotic morphological features. Flow cytometry analysis revealed that BEP caused mitochondrial membrane potential collapse. Annexin V-FITC/PI staining indicated that BEP induced apoptosis of MDA-MB-231 and Ca761 cells through cell block in S phase and G₀/G₁ phase, respectively. Western blot results showed that BEP could increase the Bax/Bcl-2 ratios, promote the release of cytochrome C, and activate the expression of caspase-3 and caspase-9 in MDA-MB-231 and Ca761 cells. In conclusion, our results demonstrated that BEP could inhibit the proliferation of breast cancer cells and induce apoptosis through mitochondrial pathways.

Optimization of ultrasonic-assisted extraction of polysaccharides and triterpenoids from the medicinal mushroom Ganoderma lucidum and evaluation of their in vitro antioxidant capacities

Ganoderma lucidum (Fr.) Krast, commonly known as "Lingzhi" in Chinese, is a medicinal mushroom that is rich in biologically active substances. Polysaccharides and triterpenoids are the two major components responsible for the bioactivity of this fungus. In the present study, the ultrasonic-assisted co-extraction (UACE) of polysaccharides and triterpenoids from G. lucidum was optimized using response surface methodology with a desirability function, with the equal importance for the two components. Following single factor experiments, the optimal conditions were determine as ultrasonic power of 210 W, extraction temperature of 80C, ratio of liquid to solid of 50 mL/g, and 100 min extraction time, using aqueous ethanol (50%, v/v) as the extracting solvent. Under the optimal conditions, the extraction yields of polysaccharides and triterpenoids reached 0.63% and 0.38%, respectively. On the basis of the scavenging capacity of 2,2-diphenyl-1-picrylhydrazyl and evaluation of reducing power, the antioxidant capacities of the polysaccharides obtained by optimal UACE process were higher than those of polysaccharides extracted using traditional hot water extraction, whereas the triterpenoid-rich extracts showed antioxidant activities similar to those obtained using the ethanol maceration method. The present study is the first report on the simultaneous extraction of polysaccharides and triterpenoids from G. lucidum. The developed UACE process could be useful in preparation of a polysaccharide- and triterpenoid-rich ingredient that holds great promise for application in the Ganoderma industry.

Polysaccharides of Scrophularia ningpoensis Hemsl.: Extraction, Antioxidant, and Anti-Inflammatory Evaluation

The roots of Scrophularia ningpoensis Hemsl. are a famous traditional Chinese medicinal herb and are also used as health food. However, information about polysaccharides from S. ningpoensis (SNPS) is very limited. We applied the ultrasonic-assisted extraction (UAE) process to extract SNPS. The UAE conditions were optimized using single-factor experiments and response surface analysis. Under the optimized conditions of ultrasonic power of 550 W, extraction time of 26 min, and extraction temperature at 50°C, the highest yield of 13.47% ± 1.63% was obtained, which was in accordance with the predicted value of 13.71%. In comparison with traditional hot water extraction, the optimized UAE method significantly increased the extraction yield with lower extraction temperature and shorter extraction time. Furthermore, the in vitro antioxidant evaluation showed that EC50 values of SNPS were 2.43 ± 0.21, 4.40 ± 0.35, and 0.56 ± 0.062 mg/mL for 2,2-diphenyl-1-picrylhydrazyl radical (DPPH) radical, hydroxyl free radical, and 2,2'-azinobis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radical scavenging assay, respectively. The anti-inflammatory potential of SNPS was detected in lipopolysaccharide (LPS) induced ICR mice. Real-time reverse transcription-polymerase chain reaction and enzyme-linked immunosorbent assay showed that SNPS significantly improved LPS-stimulated inflammatory response by decreasing mRNA and protein expression of interleukin (IL)-6 and tumour necrosis factor (TNF)-α in a dose-dependent manner. In conclusion, the extraction process of SNPS established in this study is reliable, and SNPS possesses potential antioxidant and anti-inflammatory activities, which will provide a theoretical basis for guiding the clinical application of S. ningpoensis.

A Novel Optimization of Water-Soluble Compound Polysaccharides from Chinese Herbal Medicines by Quantitative Theory and Study on Its Characterization and Antioxidant Activities

The present study optimized the extraction characterization and antioxidant activities of water-soluble compound polysaccharides (CPs) from hawthorn, lotus leaf, Fagopyrum tataricum, semen cassiae, Lycium barbarum, and Poria cocos Chinese herbal medicines that have mass ratios of 4 : 2 : 2 : 1.5 : 1 : 1. The CPs yield equation was predicted using quantitative theory, to which a maximum CPs yield of 7.18±0.24 % under the following optimal extraction conditions: a water-to-raw material ratio of 30 mL/g, an extraction temperature of 65 °C, an extraction time of 45 min, and extraction mode ultrasonic-assistant extraction. CPs were consisted of Ara, Gal, Glc, Xyl, Man, GalA and GlcA in a molar ratio of 3.1 : 2.6 : 50.6 : 1.7 : 20.4 : 17.2 : 4.2. The HPGPC profiles and FT-IR spectra implied that CPs were heterogeneous acidic polysaccharides and possessed the β-d-pyranose configuration. Congo red test, CD spectrum and SEM revealed that CPs with three helix conformation showed a flocculent, granulous or sheet-like appearance. Furthermore, the relationships between antioxidant activity and concentration of CPs displayed significant positive correlation, and the scavenging abilities for DPPH, hydroxyl radical, ABTS, superoxide-anion radical and reducing power of CPs were 93.56±2.51 %, 84.03±1.69 %, 83.29±1.93 %, 37.49±1.93 % and 0.467±0.006 at a concentration of 4.0 mg/mL. Therefore, CPs could be applied as a potential natural antioxidant in pharmaceutical or functional food fields.

3-Aminophenyl Boronic Acid Functionalized Quantum-Dot-Based Ratiometric Fluorescence Sensor for the Highly Sensitive Detection of Tyrosinase Activity

Using the commercially available and economical 6-hydroxycoumarin (6-HC) as the substrate, a dual-emission ratiometric fluorescence sensor was developed to detect tyrosinase (TYR) activity based on 3-aminophenyl boronic acid functionalized quantum dots (APBA-QDs). TYR can catalyze 6-HC, a monohydroxy compound, to form a fluorescence-enhancing o-hydroxy compound, 6,7-dihydroxycoumarin. Owing to the special covalent binding between the o-hydroxyl and boric acid groups, APBA-QDs react with 6,7-dihydroxycoumarin to form a five-membered ring ester dual-emission fluorescence probe for TYR. With an increase in TYR activity, the fluorescence at 675 nm originating from the QDs is gradually quenched, whereas that at 465 nm owing to 6,7-dihydroxycoumarin increases. Referencing the decreasing signal of the dual-emission probe at 675 nm to measure the increasing signal at 465 nm, a ratiometric fluorescence method was established to detect the TYR activity with high sensitivity and selectivity. Under the conditions optimized via response surface methodology, a linear range of 0-0.05 U/mL was obtained for the TYR activity. The detection limit was as low as 0.003 U/mL. This sensing strategy can also be adopted for the rapid screening of the TYR inhibitors.

Extraction of triterpenoid compounds from Ganoderma Lucidum spore powder through a dual-mode sonication process

Development of drug products from natural sources enable advantageous treatment and therapy options. Bioactive compounds in Ganoderma lucidum spore powder (GLSP) are known for vast antibacterial, antioxidant and anti-cancer properties. Herein, we studied the use of dual-probe ultrasound to extract triterpenoids from GLSP and further investigated the bioactivity of resulting products. FTIR results confirm the presence of key peaks although dual-probe ultrasound varied extraction efficacy. Response surface methodology (RSM) was used to optimize extraction conditions (55:28 for solvent to solid ratio, 10.38 s of ultrasound time and 94% v/v of ethanol concentration). HPLC-Q-TOF-MS confirmed the presence of nine different compounds and in vitro tests confirm good biocompatibility. Extracts are shown to inhibit DPPH radicals, reaching a maximum (61.09 ± 1.38%) at triterpenoid concentrations of 600 µg/mL. Dual-mode assisted extraction provides an enhanced approach for active embedded fiber production on a scale favorable to industry when using optimized process parameters. Furthermore, triterpenoid extracts show antibacterial properties on Staphylococcus aureus and Escherichia coli with potential in antibacterial and anticancer applications.

Optimization of ultrasonic-assisted enzymatic extraction of polysaccharides from thick-shell mussel (Mytilus coruscus) and their antioxidant activities

This study aimed to obtain the purified fractions of Mytilus coruscus polysaccharides (MCPs) and investigate their antioxidant activities. MCPs were prepared through ultrasonic-assisted enzymatic extraction optimized by employing the response surface methodology. A single-factor experiment was conducted using the Box-Behnken design to determine the optimum extraction conditions of MCPs. The ultrasonic power was 60 W, liquid-to-material ratio was 30 mL/g, extraction time was 36 min, extraction temperature was 64 °C, enzyme concentration was 3.2%, and polysaccharide extraction yield was 12.86% ± 0.12%. A novel polysaccharide (MCP1-2) was obtained after the purification with AB-8 macroporous resin, DEAE Sepharose Fast Flow, and Sepharose CL-6B column. The molecular weight of MCP1-2 was estimated to be 134.9 kDa according to high-performance gel permeation chromatography. High-pressure liquid-phase chromatography results showed that MCP1-2 contained mannose, rhamnose, glucuronic acid, glucose, galactose, and L-Fuc at a molar ratio of 1.53:1:4.83:81.82:2.36:1.51. Infrared and NMR spectroscopies confirmed that MCP1-2 possessed α- and β- configurations. The antioxidant activities of MCP1-2 were investigated in vitro, and the results showed that MCP1-2 had good antioxidant activity and can be used as a natural antioxidant in food.

Species and Geographical Origins Discrimination of Porcini Mushrooms Based on FT-IR Spectroscopy and Mineral Elements Combined with Sparse Partial Least Square-Discriminant Analysis

Misrecognition and toxic elements are two of several reasons responsible for food poisoning even death in the summer, a time when a great deal of edible mushrooms is celebrated in Southwestern China featured as complex environment conditions. It is highly important to identify the difference of chemical constituents in edible mushrooms at the regional-scale. In this study, Fourier transform infrared (FT-IR) spectroscopy and inductively coupled plasma mass spectrometry were applied to investigate organic matters and 18 mineral elements in porcini mushrooms of six species collected from 17 sampling sites in nine Yunnan cities. Classification models on the species, regions, and part levels were established using sparse partial least square-discriminant analysis and principal component analysis. At the species level and region level accuracies of greater than 92.1% and 92.8% was achieved, respectively, whereas on the part level caps and stipes were classified with 96.7% accuracy. One of the most popular mushrooms is Boletus edulis characterized by polysaccharide, lipid, and ribonucleic acid as well as several phenolic compounds. Temperature and precipitation show possible influences on accumulations of polysaccharides and ribonucleic acid. Furthermore, the most important elements of caps contributed the difference between two parts are copper (Cu), zinc (Zn), and phosphorus (P), whereas stipes instead by manganese (Mn) and cobalt (Co). These results demonstrated that FT-IR spectroscopy and elements contents provide information sufficient for classifying different porcini mushroom samples, which might be helpful for controlling food security and quality assessment of edible mushrooms.

Ultrasound-assisted extraction of some branded tea: Optimization based on polyphenol content, antioxidant potential and thermodynamic study

Tea is one of the top beverages used around the world every day, which contains a high amount of polyphenols and antioxidants. The main aim of this research is to quantify some marketed black tea (Rabea, Lipton, Alkbous, Green gold and Haritham) for phenolic contents and antioxidant potential evaluation by ultrasound solvent extraction and was compared with conventional extraction. Ultrasonic extraction was optimized by considering frequencies (26 kHz, 40 kHz), temperature (30, 40 and 50 °C), and power (30, 40 and 50%) at a fixed time of 30 min. In both the ultrasonic frequencies, 40 °C temperature and 40% power combination exhibited highest cumulative yield (mg/100 g DW), total phenolic content (mg gallic acid/g DW), flavonoids (mg/g DW) and DPPH radical scavenging activity (%) in all branded tea. Within each brand of tea, at any temperature-power combination at particular frequency results were not significantly different. But, at a similar condition of temperature power results were found significantly different between two frequencies. Furthermore, ultrasonic extraction process was analyzed thermodynamically by selecting some basic parameters. Thermodynamics results showed the extraction process was feasible, spontaneous and irreversible. Also, 26 kHz ultrasonic probe is more appropriate for the extraction purpose and thermodynamically more acceptable as compared to 40 kHz ultrasonic bath. Moreover, Haritham was selected as the best tea brand due to its high polyphenol contents and antioxidant potential.

Quantitative Evaluation of Ultrasound-Assisted Extraction of 1,3-β-glucans from Dictyophora indusiata Using an Improved Fluorometric Assay

In the present study, an improved fluorometric assay based on aniline blue dye for the specific, accurate, and rapid quantification of 1,3-β-glucans in edible mushrooms was developed and fully validated. Furthermore, the improved method was successfully applied for the quantitative evaluation of water soluble 1,3-β-glucans extracted from Dictyophora indusiata by ultrasound-assisted extraction (UAE) with response surface methodology. Results showed that the improved method exhibited high specificity, accuracy, precision, repeatability, and stability, as well as a wide calibration range of 10-600 µg/mL (R2 > 99.9%). The maximum extraction yields of water soluble 1,3-β-glucans (1.20%) and total polysaccharides (5.41%) were achieved at the optimized extraction parameters as follows: ultrasound amplitude (56%), ultrasound extraction time (15 min), and ratio of liquid to raw material (22 mL/g). The results suggest that the improved fluorometric assay has great potential to be used as a routine method for the quantitative evaluation of 1,3-β-glucans in edible mushrooms and that the UAE method is effective for the extraction of 1,3-β-glucans from edible mushrooms.

Evaluation of the Efficiency of Ethanol Precipitation and Ultrafiltration on the Purification and Characteristics of Exopolysaccharides Produced by Three Lactic Acid Bacteria

Exopolysaccharides (EPS) produced by three Lactic Acid Bacteria strains, Lactococcus lactis SLT10, Lactobacillus plantarum C7, and Leuconostoc mesenteroides B3, were isolated using two methods: ethanol precipitation (EPS-ETOH) and ultrafiltration (EPS-UF) through a 10 KDa cut-off membrane. EPS recovery by ultrafiltration was higher than ethanol precipitation for Lactococcus lactis SLT10 and Lactobacillus plantarum C7. However, it was similar with both methods for Leuconostoc mesenteroides B3. The monomer composition of the EPS fractions revealed differences in structures and molar ratios between the two studied methods. EPS isolated from Lactococcus lactis SLT10 are composed of glucose and mannose for EPS-ETOH against glucose, mannose, and rhamnose for EPS-UF. EPS extracted from Lactobacillus plantarum C7 and Leuconostoc mesenteroides B3 showed similar composition (glucose and mannose) but different molar ratios. The molecular weights of the different EPS fractions ranged from 11.6±1.83 to 62.4±2.94 kDa. Molecular weights of EPS-ETOH fractions were higher than those of EPS-UF fractions. Fourier transform infrared (FTIR) analysis revealed a similarity in the distribution of the functional groups (O-H, C-H, C=O, -COO, and C-O-C) between the EPS isolated from the three strains.

Ultrasound-Assisted Extraction of Polysaccharides from Volvariella volvacea: Process Optimization and Structural Characterization

The aims of the present study were to optimize the operational parameters to maximize the yield of ultrasound-assisted polysaccharide extraction from Volvariella volvacea (straw mushroom) fruiting bodies by using for the first time one-factor-at-a-time and three-level Box-Behnken factorial designs. A maximum polysaccharide yield of 8.28 ± 0.23% was obtained under the optimized conditions of ultrasound power of 175 W, extraction temperature of 57 °C, extraction time of 33 min, and the ratio of liquid to raw material of 25:1, respectively. Compared to the hot-water extraction, the ultrasound-assistance favored the extraction of polysaccharides from V. volvacea for its higher polysaccharide yield and efficiency. Further preliminary polysaccharide structural characterization indicated that ultrasound treatment affected the monosaccharide compositions and ratios, and molecular weight range of polysaccharides extracted from V. volvacea.

Optimization and characterization of high pressure homogenization produced chemically modified starch nanoparticles

Chemically modified starch (RS4) nanoparticles were synthesized through homogenization and water-in-oil mini-emulsion cross-linking. Homogenization was optimized with regard to z-average diameter by using a three-factor-three-level Box-Behnken design. Homogenization pressure (X1), oil/water ratio (X2), and surfactant (X3) were selected as independent variables, whereas z-average diameter was considered as a dependent variable. The following optimum preparation conditions were obtained to achieve the minimum average size of these nanoparticles: 50 MPa homogenization pressure, 10:1 oil/water ratio, and 2 g surfactant amount, when the predicted z-average diameter was 303.6 nm. The physicochemical properties of these nanoparticles were also determined. Dynamic light scattering experiments revealed that RS4 nanoparticles measuring a PdI of 0.380 and an average size of approximately 300 nm, which was very close to the predicted z-average diameter (303.6 nm). The absolute value of zeta potential of RS4 nanoparticles (39.7 mV) was higher than RS4 (32.4 mV), with strengthened swelling power. X-ray diffraction results revealed that homogenization induced a disruption in crystalline structure of RS4 nanoparticles led to amorphous or low-crystallinity. Results of stability analysis showed that RS4 nanosuspensions (particle size) had good stability at 30 °C over 24 h.

Extraction Optimization, Characterization, and Bioactivities of Polysaccharides from Pinelliae Rhizoma Praeparatum Cum Alumine Employing Ultrasound-Assisted Extraction

In this study, the ultrasound-assisted extraction of polysaccharides (PSA) from Pinelliae Rhizoma Praeparatum Cum Alumine (PRPCA) was optimized by response surface methodology (RSM). The structural characteristics of PSA were analyzed by UV-vis spectroscopy, infrared spectroscopy, scanning electron microscopy, high performance gel permeation chromatography and high performance liquid chromatography, respectively. In addition, antioxidant and antimicrobial activities of PSA were studied by different in vitro assays. Results indicated that the optimal extraction conditions were as follows: the ratio of water to raw of 30 mL/g, extraction time of 46.50 min, ultrasonic temperature of 72.00 °C, and ultrasonic power of 230 W. Under these conditions, the obtained PSA yield (13.21 ± 0.37%) was closely agreed with the predicted yield by the model. The average molecular weights of the PSA were estimated to be 5.34 × 10³ and 6.27 × 10⁵ Da. Monosaccharide composition analysis indicated that PSA consisted of mannose, galactose uronic acid, glucose, galactose, arabinose with a molar ratio of 1.83:0.55:75.75:1.94:0.45. Furthermore, PSA exhibited moderate antioxidant and antibacterial activities in vitro. Collectively, this study provides a promising strategy to obtain bioactive polysaccharides from processed products of herbal medicines.