Starch-based materials encapsulating food ingredients: Recent advances in fabrication methods and applications

Mitigation of Dietary Microplastic Accumulation and Oxidative Stress Response in Rainbow Trout (Oncorhynchus mykiss) Fry Through Dietary Supplementation of a Natural Microencapsulated Antioxidant

Microplastic (MP) contamination in aquafeed poses a significant risk to fish health and safety. This study evaluated the effectiveness of a microencapsulated natural antioxidant, astaxanthin (AX), in mitigating the adverse effects of dietary MPs in rainbow trout fry. The microcapsules were composed of an organic wall matrix designed to preserve AX while limiting MP absorption in the intestine. During a 60-day feeding trial, fish were fed diets containing amino formaldehyde polymer fluorescent MP microbeads (1-5 µm; 50 mg/kg), either alone or in combination with microencapsulated AX. MP localization in tissues was assessed via confocal microscopy, and quantification was performed following chemical tissue digestion. Fish welfare was evaluated using histological and molecular analyses. No significant effects on growth or gut morphology were observed across experimental groups. However, MPs were mainly translocated to the liver, where they induced oxidative stress, as evidenced by the upregulation of sod1, sod2, and cat gene expression. The inclusion of microencapsulated AX significantly mitigated the oxidative stress response, and the microcapsules facilitated MP coagulation in the gut, reducing intestinal absorption. These findings highlight the potential of microencapsulated antioxidants to counteract MP-induced oxidative stress and reduce MP bioavailability in aquaculture species, contributing to improved fish welfare and product quality.

Microencapsulation of cornmint oil with octenyl succinate anhydride debranched starch by electrostatic spray drying: Characterization and release kinetics of the aroma components

In this study, a novel method for the preparation of corn mint oil microcapsules was developed using electrostatic spray drying (ESD) with three octenyl succinate anhydride debranched starch (OSADS) wall materials. It was complexed with gum arabic (GA) and maltodextrin (MD). This study addresses the research gap that traditional methods have low efficiency in encapsulating volatile compounds (such as essential oils). The control group used ordinary spray drying (OSD) and untreated starch wall material. After debranching, OSADS exhibits reduced solubility and viscosity, enabling the encapsulation of more aromatic compounds. The loading of the microcapsules ranged from 50.26 % to 73.28 %, indicating that the encapsulation efficiency was significantly improved using OSADS compared to traditional methods. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) revealed spherical core-shell structures and multicapsule structures. The slow-release process of cornmint oil was efficiently monitored in real-time using transfer quadrupole time-of-flight mass spectrometry (SICRIT-QTOF MS). Gas chromatography-mass spectrometry (GC-MS) analysis showed that the microcapsules retained 19 aromatic components, and their release kinetics conformed to first-order, Higuchi, and Weibull models. These results suggest that the electrostatic spray drying method combined with OSADS is an effective approach for preparing flavor microcapsules, ensuring efficient encapsulation and release of aromatic compounds.

Temporal changes in plasma and milk lipids in response to an esophageal bolus of rumen-protected fish oil in lactating Holstein dairy cows

Feeding very-long-chain omega-3 (VLC n-3) fatty acids (FA), which are found in fish oil, may have beneficial effects on health, fertility, and milk production in the dairy cow. Rumen-protected technologies aim to prevent the ruminal biohydrogenation of VLC n-3 FA. To test the effects of these technologies on circulating FA and phospholipid concentrations, and milk FA concentrations, six mid-lactation, multiparous, pregnant Holstein dairy cows (mean ± SD: 155 ± 19 days in milk; 3.0 ± 0.5 body condition score; 3.2 ± 1.1 lactations; 644 ± 23 kg BW) were randomly assigned to treatments in a study with a replicated 3 × 3 Latin Square design. Cows were unsupplemented (control) or supplemented with a single esophageal bolus of a gelatin capsule containing a fish oil product coated in palm oil triglycerides or modified starch (TAG and STR, respectively). The provision of either fish oil product provided 10 g equivalent of VLC n-3 FA including 20:5 n-3 and 22:6 n-3. Cows were fed a total mixed ration to meet or exceed nutrient requirements and were milked thrice daily. Blood was sampled at 0, 2, 4, 6, 8, 10, 12, 16, 18, 20, 24, and 36 h, relative to bolus administration. A 7-d washout period was utilized between each bolus delivery. Extracted plasma was analyzed for individual FA and phospholipid concentrations using gas chromatography and mass spectrometry. Separated milk fat was analyzed for individual milk FA using gas-liquid chromatography and a flame-ionization detector. Data were analyzed under a mixed model with the random effect of cow, and the fixed effects of treatment, hour, and period. Plasma concentrations of 20:5 n-3 and 22:6 n-3 increased over time by TAG and STR, relative to control. Plasma concentrations of lysophophatidylcholine-20:5, -22:5 and -22:6, and phosphatidylcholine (PC)-38:5 and -38:6 were higher in TAG and STR by h 10, relative to control. Plasma PC-40:5 and -40:6 concentrations were greater in cows administered STR by h 10, relative to TAG. Total milk n-3 increased over time in treated cows compared to control. We conclude that triglyceride- or starch-encapsulated fish oil increases the plasma and milk concentrations of VLC n-3 FA and phospholipids containing these acyl chains in lactating cows.

A comprehensive review of starch-based technology for encapsulation of flavor: From methods, materials, and release mechanism to applications

Encapsulation of flavor and aroma compounds in appropriate materials and forms has long been an important issue. Encapsulation of flavor in inexpensive, stable, and widely used starch-based materials could preserve or mask characteristic aroma compounds, improve flavor thermal and oxidative stability, control release, and increase bioavailability. However, several technical challenges still hinder the application of starch-based encapsulated flavor complexes in the food industry. This study comprehensively and systematically the encapsulation technology of starch-based materials, the properties and applications of starch-based materials, and the flavor release mechanism of encapsulated compounds, aiming to provide insights into the rational design of starch-encapsulated flavor. While choosing flavor encapsulation materials for industries, starch, cyclodextrins, maltodextrin, octenyl succinic anhydride starches, and porous starch are worthy of consideration. On this basis, future research directions for the nutritional value of starch-encapsulated flavor compounds and their application in the food industry are proposed. To elucidate the release mechanisms and application efficiencies of various starch-based flavor complexes, it is necessary to investigate the conformational interactions as well as applications in various food and gastrointestinal systems.

Plant-derived materials for biomedical applications

With exceptional biocompatibility and biodegradability, plant-derived materials have garnered significant interest for a myriad of biomedical applications. This mini-review presents a concise overview of prevalent plant-derived materials, encompassing polysaccharide-based polymers, protein-based polymers, extracellular vesicles, mucilage, decellularized scaffolds, and whole plant-based biomass. Through different processing techniques, these plant-derived materials can be tailored into a variety of forms, such as nanoparticles, nanofibers, and hydrogels, to address the nuanced requirements of biomedical applications. With the emphasis on wound healing, tissue engineering, and drug delivery, this review underscores the unique advantages of plant-derived materials, such as lower risk of endotoxin and virus contamination, reduced ethical concerns, scalability, and eco-friendly attributes. However, challenges such as the need for the development of standardized isolation methods of these materials, and further transition from preclinical to clinical applications still remain to be solved.

Recent updates of carotenoid encapsulation by spray-drying technique

Carotenoids are compounds sensitive to environmental factors such as light, heat, and oxygen, which can result in the loss of their properties due to isomerisation and oxidation. To overcome this problem, spray drying encapsulation has been widely used as a method to protect and stabilise carotenoids in different wall materials. This article summarises the findings and research on spray drying encapsulation of carotenoids over the past 15 years, with an emphasis on the importance of controlling the operational conditions of the drying process and the association of different wall materials (proteins and polysaccharides), promising to increase encapsulation efficiency and stabilise carotenoids, with perspectives and trends in applications. The use of spray drying for carotenoid microencapsulation can open up new opportunities for controlled delivery of beneficial compounds. Based on the study, it is expected to provide information for researchers, professionals, and companies interested in the development of functional food products.

The use of capsicum oleoresin microparticles to mitigate hepatic damage and metabolic disorders induced by obesity

Capsicum oleoresin has potential health benefits, particularly against obesity markers. Due to its high pungency, few studies have been done to explore the intake of this ingredient. The objective of this study was to use the Capsicum oleoresin (CO) microencapsulated into a high-fat diet to evaluate its metabolic effect on mice. Two formulation containing 15 % solids were prepared: the first (F1) with 5% CO and 95% emulsifier, and the second (F2) with 2.5% corn oil, 2.5% CO, and 95% emulsifier. These formulation were atomized in a spray dryer. Ultra-Performance Liquid Chromatography determined the capsaicin content for both formulations. Mice were divided into two groups: lean control (normocaloric AIN diet, n = 10) and high fat (HF diet: hypercaloric, n = 30), which were subdivided into three subgroups: HF control diet (n = 10); diet F1: HF + 20 % CO oleoresin microparticles (n = 10); and diet F2: HF + 20 % CO microparticles containing corn oil (n = 10). The animals treated with the microparticles showed lower glucose levels than the HF control. Mice fed with HF-containing CO microparticles had cholesterol blood levels similar to that of the lean group and lower (<100 mg/dL) than that of the HF control group (150 mg/dL). Capsicum oleoresin microparticles added to high-fat diets promoted lower weight gain and protected the liver against hepatic steatosis. Leptin levels for mice fed with HF diet plus CO microparticles averaged between 2 and 5 ng/ml, whereas the fat control group developed leptin resistance. Capsicum microparticles evidenced a protective effect against dyslipidemia compared to the fat control group, which suggests their use as a potential ingredient for the control of obesity.

Overcoming Biopotency Barriers: Advanced Oral Delivery Strategies for Enhancing the Efficacy of Bioactive Food Ingredients

Bioactive food ingredients contribute to the promotion and maintenance of human health and wellbeing. However, these functional ingredients often exhibit low biopotency after food processing or gastrointestinal transit. Well-designed oral delivery systems can increase the ability of bioactive food ingredients to resist harsh environments inside and outside the human body, as well as allow for controlled or triggered release of bioactives to specific sites in the gastrointestinal tract or other tissues and organs. This review presents the characteristics of common bioactive food ingredients and then highlights the barriers to their biopotency. It also discusses various oral delivery strategies and carrier types that can be used to overcome these biopotency barriers, with a focus on recent advances in the field. Additionally, the advantages and disadvantages of different delivery strategies are highlighted. Finally, the current challenges facing the development of food-grade oral delivery systems are addressed, and areas where future research can lead to new advances and industrial applications of these systems are proposed.

Effect of starch categories and mass ratio of TA/starch on the emulsifying performance and stability of emulsions stabilized by tannic acid-starch complexes

This study compounded natural corn starch (CS), mung bean starch (MBS) and potato starch (PS) with tannic acid (TA) to stabilize O/W Pickering emulsion. The effect of TA/starch mass ratio (0-0.25) and three starch categories on particle properties, emulsifying properties, lipid oxidation, freeze-thaw stability, emulsion powder and digestive properties were comprehensibly investigated. In detail, the TA/starch complexes size increased gradually (91.14 nm-200.87 nm) and the hydrophobicity first increased and then decreased (TA/CS > TA/MBS > TA/PS) with increasing TA/starch mass ratio. In addition, the emulsifying ability of TA/starch complexes also increased first and then decreased with increasing mass ratio, especially TA/CS system was the best, which was the same as the hydrophobicity conclusion (θow = 80.46°). Moreover, four starch-based emulsion application characteristics were further evaluated to reveal interface structure. Compared to CS and PS system, TA/MBS emulsion had stronger ability to resist the oil oxidation (TBA = 2.54 μg/mL), destruction of ice crystal (whiter emulsion powder) and digestive enzymes (FFAs = 75.33 %). It mainly attributed to the crosslinking network structure and the highest surface load of TA/MBS complexes. This study would provide new ideas for the design and application of emulsifying properties and emulsion stability.

Food nanotechnology: opportunities and challenges

Food nanotechnology, which applies nanotechnology to food systems ranging from food production to food processing, packaging, and transportation, provides tremendous opportunities for conventional food science and industry innovation and improvement. Although great progress and rapid growth have been achieved in food nanotechnology research owing to the unique food features rendered by nanotechnology, at a fundamental level, food nanotechnology is still in its initial stages and the potential adverse effects of nanomaterials are still a controversial problem that attract public attention. Food-derived nanomaterials, compared to some inorganic nanoparticles and synthetic organic macromolecules, can be digested rapidly and produce similar digestion products to those produced normally, which become the mainstream and trend for food nanotechnology in practical applications, and are expected to be a vital tool for addressing the security problem and easing public concerns. These food-derived materials enable the favourable characteristics of nanostructures to be combined with the safety, biocompatibility, and bioactivity of natural food. Very recently, diverse food-derived nanomaterials have been explored and widely applied in multiple fields. Herein, we thoroughly summarize the fabrication and development of nanomaterials for use in food technology, as well as the recent advances in the improvement of food quality, revolutionizing food supply, and boosting food industries based on foodborne nanomaterials. The current challenges in food nanotechnology are also discussed. We hope this review can provide a detailed reference for experts and food manufacturers and inspire researchers to participate in the development of food nanotechnology for highly efficient food industry growth.

Carboxymethyl cellulose-based photothermal film: A sustainable packaging with high barrier and tensile strength for food long-term antibacterial protection

Traditional packaging materials feed the growing global food protection. However, these packaging materials are not conducive to environment and have not the ability to kill bacteria. Herein, a green and simple strategy is reported for food packaging protection and long-term antibacterial using carboxymethylcellulose-based photothermal film (CMC@CuS NPs/PVA) that consists of carboxymethyl cellulose (CMC) immobilized copper sulfide nanoparticles (CuS NPs) and polyvinyl alcohol (PVA). With satisfied oxygen transmittance (0.03 cc/m2/day) and water vapor transmittance (163.3 g/m2/day), the tensile strength, tear strength and burst strength reached to 3401.2 N/m, 845.7 mN and 363.6 kPa, respectively, which could lift 4.5 L of water. The composite film had excellent photothermal conversion efficiency and photothermal stability. Under the irradiation of near infrared (NIR), it can rapidly heated up to 197 °C within 25 s. The antibacterial analysis showed that the inhibition rate of composite film against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) could all reach >99 %. Furthermore, the synthesized CuS NPs was well immobilized and the residual rate of copper kept 98.7 % after 10 days. Noticeably, the composite film can preserve freshness of strawberries for up to 6 days. Therefore, the composite film has potential application for food antibacterial protection.

Hydrogel delivery systems of functional substances for precision nutrition

Hydrogel delivery systems based on polysaccharides and proteins have the ability to protect functional substances from chemical degradation, control/target release, and increase bioavailability. This chapter summarizes the recent progress in the utilization of hydrogel delivery systems for nutritional interventions. Various hydrogel delivery systems as well as their preparation, structure, and properties are given. The applications for the encapsulation, protection, and controlled delivery of functional substances are described. We also discuss their potential and challenges in managing chronic diseases such as inflammatory bowel disease, obesity, liver disease, and cancer, aiming at providing theoretical references for exploring novel hydrogel delivery systems and their practical prospects in precise nutritional interventions.

Interactions between rice starch and flavor components and their impact on flavor

Flavor is considered one of the most significant factors affecting food quality. However, it is often susceptible to environmental factors, so encapsulation is highly necessary to facilitate proper handling and processing. In this study, the structural changes in starch encapsulation and their effects on flavor retention were investigated using indica starch (RS) as a matrix to encapsulate three flavoring compounds, namely nonanoic acid, 1-octanol, and 2-pentylfuran. The rheological and textural results suggested that the inclusion of flavor compounds improved the intermolecular interactions between starch molecules, resulting in a significant increase in the physicochemical properties of starch gels in the order: nonanoic acid > 1-octanol > 2-pentylfuran. The XRD results confirmed the successful preparation of v-starch. Additionally, the inclusion complexes (ICs) were characterized using FT-IR, SEM, and DSC techniques. The results showed that v-starch formed complexes with Flavor molecules. The higher enthalpy of the complexes suggested that the addition of alcohols and acids could improve the intermolecular complexation between starch molecules. The retention rates of three flavor compounds in starch were determined using HS-GC, with the values of 51.7 %, 32.37 %, and 35.62 %. Overall, this study provides insights into novel approaches to enhance the quality and flavor retention, improve the storability and stability, reduce losses during processing and storage, and extend the shelf life of starchy products.

Recent Advances of Natural Pentacyclic Triterpenoids as Bioactive Delivery System for Synergetic Biological Applications

Bioactive compounds have drawn much attention according to their various health benefits. However, poor dissolvability, low stability and limited bioavailability largely narrow their applications. Although a variety of nontoxic ingredients have been rapidly developed as vehicles to deliver bioactive compounds in the last few years, most of them are non-bioactive. Pentacyclic triterpenoids, owing to their unique self-assembly and co-assembly behaviors and different physiological functions, can construct bioactive carriers due to their higher biodegradability, biocompatibility and lower toxicity. In this paper, the basic classification, biological activities and physicochemical properties of pentacyclic triterpenoids were summarized. Additionally, applications of self-assembled and co-assembled pentacyclic triterpenoids as bioactive delivery systems to load bioactive components and future research directions were discussed. This study emphasizes the potential of pentacyclic triterpenoids as bioactive delivery systems, offering a new perspective for constructing self- or co-assemblies for further synergetic biological applications.

Emulsification and stabilisation technologies used for the inclusion of lipophilic functional ingredients in food systems

Food industry is increasingly using functional ingredients to improve the food product quality. Lipid-containing functional ingredients are important sources of nutrients. This review examines the current state of emulsification and stabilisation technologies for incorporating lipophilic functional ingredients into food systems. Lipophilic functional ingredients, such as omega-3 fatty acids, carotenoids, and fat-soluble vitamins, offer numerous health benefits but present challenges due to their limited solubility in water-based food matrices. Emulsification techniques enable the dispersion of these ingredients in aqueous environments, facilitating their inclusion in a variety of food products. This review highlights recent advances in food emulsion formulation, emulsification methods and stabilisation techniques which, together, improve the stability and bioavailability of lipophilic compounds. The role of various emulsifiers, stabilizers, and encapsulation materials in enhancing the functionality of these ingredients is also explored. Furthermore, the review discusses different stabilisation techniques which can yield in emulsion in a solid or liquid state. By providing a comprehensive overview of current technologies, this review aims to guide future research and application in the development of functional foods enriched with lipophilic ingredients.

Encapsulation of Active Substances in Natural Polymer Coatings

Already used in the food, pharmaceutical, cosmetic, and agrochemical industries, encapsulation is a strategy used to protect active ingredients from external degradation factors and to control their release kinetics. Various encapsulation techniques have been studied, both to optimise the level of protection with respect to the nature of the aggressor and to favour a release mechanism between diffusion of the active compounds and degradation of the barrier material. Biopolymers are of particular interest as wall materials because of their biocompatibility, biodegradability, and non-toxicity. By forming a stable hydrogel around the drug, they provide a 'smart' barrier whose behaviour can change in response to environmental conditions. After a comprehensive description of the concept of encapsulation and the main technologies used to achieve encapsulation, including micro- and nano-gels, the mechanisms of controlled release of active compounds are presented. A panorama of natural polymers as wall materials is then presented, highlighting the main results associated with each polymer and attempting to identify the most cost-effective and suitable methods in terms of the encapsulated drug.

Optimization of ultrasonic conditions for improving the characteristics of corn starch-glycyrrhiza polysaccharide composite to prepare enhanced quality lycopene inclusion complex

In this study, based on response surface optimization of ultrasound pre-treatment conditions for encapsulating lycopene, the corn starch-glycyrrhiza polysaccharide composite (US-CS-GP) was used to prepare a novel lycopene inclusion complex (US-CS-GP-Lyc). Ultrasound treatment (575 W, 25 kHz) at 35 °C for 25 min significantly enhanced the rheological and starch properties of US-CS-GP, facilitating the preparation of US-CS-GP-Lyc with an encapsulation efficiency of 76.12 ± 1.76 %. In addition, the crystalline structure, thermal properties, and microstructure of the obtained lycopene inclusion complex were significantly improved and showed excellent antioxidant activity and storage stability. The US-CS-GP-Lyc exhibited a V-type crystal structure, enhanced lycopene loading capacity, and reduced crystalline regions due to increased amorphous regions, as well as superior thermal properties, including a lower maximum thermal decomposition rate and a higher maximum decomposition temperature. Furthermore, its smooth surface with dense pores provides enhanced space and protection for lycopene loading. Moreover, the US-CS-GP-Lyc displayed the highest DPPH scavenging rate (92.20 %) and enhanced stability under light and prolonged storage. These findings indicate that ultrasonic pretreatment can boost electrostatic forces and hydrogen bonding between corn starch and glycyrrhiza polysaccharide, enhance composite properties, and improve lycopene encapsulation, which may provide a scientific basis for the application of ultrasound technology in the refined processing of starch-polysaccharides composite products.

Potential use of Thai mango (Mangifera indica Linn. cultivar Chok-Anan) seed porous starch for retention of aroma compounds from coffee extract

This study aimed to extract and modify the properties of the starch from Thai mango seeds (cultivar Chok-Anan). The porous starch samples were obtained using enzymatic treatment and its potential to retain aroma compounds from coffee extract was evaluated. The physicochemical properties, structure characteristics, porosity characteristics and adsorption quantity of starches were also determined. The retention of coffee aroma compounds was investigated through combining starch or porous starch with odorants, and storing the mixtures at room temperature for 7 and 14 days, respectively. The chemical properties of aroma compounds as well as starch surface properties were observed to affect the retention of aroma compounds upon storage. Additionally, 2-furanmethanol, d-limonene and maltol were selected to be the primary target compounds to assess the retention of odorants. This study observed a noticeable decrease in d-limonene content throughout the storage period. On the contrary, after 14 days of storage, the porous starch exhibited high retention of hydroxy compounds including 2-furanmethanol and maltol. However, after prolonged storage their ability to retain 2-furanmethanol and maltol slightly decreased. Therefore, the porous starch derived from mango seeds exhibited the potential to retain coffee aroma compounds and could be a desirable green adsorbent for food and cosmetic industries.

Novel nano-encapsulated limonene: Utilization of drug-in-cyclodextrin-in-liposome formulation to improve the stability and enhance the antioxidant activity

Drug-in-cyclodextrin-in-liposome (DCL) combines advantages of cyclodextrin and liposome. Here, DCL formulation was successfully prepared to encapsulate limonene (Lim), whose characterization revealed that particle size was 147.5 ± 1.3 nm and zeta potential was -48.7 ± 0.8 mV. And the complexation mechanism of Lim/HP-β-CD inclusion complex (the intermediate of DCL) was analyzed by molecular dynamics simulation, showing that Lim was entrapped into the cavity of HP-β-CD through electrostatic and hydrophobic interaction with a molar ratio of 1:1. Notably, DCL formulation not only reduced Lim volatilization in 25℃, but also enhanced the free radical (DPPH· and ABTS·+) scavenging ability of Lim. In summary, Lim-DCL formulation improved the stability and enhanced the antioxidant activity of Lim. DCL nanocarrier system is suitable to preserve volatile and hydrophobic compounds, enlarging their application in pharmaceutics industries.

Advances in the construction and application of konjac glucomannan-based delivery systems

Konjac glucomannan (KGM) has been widely used to deliver bioactive components due to its naturalness, non-toxicity, excellent biodegradability, biocompatibility, and other characteristics. This review presents an overview of konjac glucomannan as a matrix, and the types of konjac glucomannan-based delivery systems (such as hydrogels, food packaging films, microencapsulation, emulsions, nanomicelles) and their construction methods are introduced in detail. Furthermore, taking polyphenol compounds, probiotics, flavor substances, fatty acids, and other components as representatives, the applied research progress of konjac glucomannan-based delivery systems in food are summarized. Finally, the prospects for research directions in konjac glucomannan-based delivery systems are examined, thereby providing a theoretical basis for expanding the application of konjac glucomannan in other industries, such as food and medicine.

Preparation and characterization of a modified Canna starch as a wall material for the encapsulation of methyleugenol improves its antifungal activity against Fusarium trichothecioides

In this study, α-amylase (α-A) and 2-octenylsuccinic anhydride (OSA)-modified Canna starch (Cs) were prepared and characterized as wall materials and encapsulated with methyleugenol (α-A-OSA-Cs-methyleugenol); their in vitro antifungal activity against Fusarium trichothecioides (F. trichothecioides) was also investigated. The encapsulation efficiency under optimal encapsulation conditions was 83.98%. The results of particle size, polydispersity index (PDI), zeta potential, electron scanning microscopy and Fourier transform infrared spectroscopy showed that the modified Cs had superior physicochemical properties; it was also demonstrated that methyleugenol successfully entered the pores of Cs. The in vitro release study showed that α-A-OSA-Cs could effectively reduce their volatility under different temperature environments. α-A-OSA-Cs have excellent performance as slow-release wall materials, and after encapsulation with methyleugenol, the inhibition ability of F. trichothecioides mycelium growth was dose-dependent and improved, extending the shelf life of potatoes, which has good commercial value in the field of slow-release preservatives.

Bioactive delivery systems based on starch and its derivatives: Assembly and application at different structural levels

Starch and modified starch, spanning various structural levels, are comprehensively reviewed, with a special emphasis on the advancement of starch and its derivative-based delivery systems for bioactive substances. The pivotal aspect highlighted is the controlled release of active ingredients by starch-based delivery systems with distinct hierarchical structures. At the molecular level, diverse categories of starch degradation products, such as dextrin and highly branched starch, serve as versatile amphiphilic carriers for encapsulating active ingredients. At the level of helical structure, the distinctive configuration of the starch-guest complex partly determines the mechanism of controlled release for diverse active components. At the crystal and particle structural level, starch assumes the role of a carrier, effectively modulating the release of active substances, and enhances the innate physiological activity of different active components. As a natural polymer molecule, starch can also generate hydrogel materials in polymer form, expanding its utility in the fields of food, materials, and even medicine.

Advances in polysaccharides for probiotic delivery: Properties, methods, and applications

Probiotics are essential to improve the health of the host, whereas maintaining the viability of probiotics in harsh environments remains a challenge. Polysaccharides have non-toxicity, excellent biocompatibility, and outstanding biodegradability, which can protect probiotics by forming a physical barrier and show a promising prospect for probiotic delivery. In this review, we summarize polysaccharides commonly used for probiotic microencapsulation and introduce the microencapsulation technologies, including extrusion, emulsion, spray drying, freeze drying, and electrohydrodynamics. We discuss strategies for better protection of probiotics and introduce the applications of polysaccharides-encapsulated probiotics in functional food, oral formulation, and animal feed. Finally, we propose the challenges of polysaccharides-based delivery systems in industrial production and application. This review will help provide insight into the advances and challenges of polysaccharides in probiotic delivery.

Improved Viability of Probiotics via Microencapsulation in Whey-Protein-Isolate-Octenyl-Succinic-Anhydride-Starch-Complex Coacervates

The aim of this study was to microencapsulate probiotic bacteria (Lactobacillus acidophilus 11073) using whey-protein-isolate (WPI)-octenyl-succinic-anhydride-starch (OSA-starch)-complex coacervates and to investigate the effects on probiotic bacterial viability during spray drying, simulated gastrointestinal digestion, thermal treatment and long-term storage. The optimum mixing ratio and pH for the preparation of WPI-OSA-starch-complex coacervates were determined to be 2:1 and 4.0, respectively. The combination of WPI and OSA starch under these conditions produced microcapsules with smoother surfaces and more compact structures than WPI-OSA starch alone, due to the electrostatic attraction between WPI and OSA starch. As a result, WPI-OSA-starch microcapsules showed significantly (p < 0.05) higher viability (95.94 ± 1.64%) after spray drying and significantly (p < 0.05) better protection during simulated gastrointestinal digestion, heating (65 °C/30 min and 75 °C/10 min) and storage (4/25 °C for 12 weeks) than WPI-OSA-starch microcapsules. These results demonstrated that WPI-OSA-starch-complex coacervates have excellent potential as a novel wall material for probiotic microencapsulation.

A Comprehensive Review of Polysaccharide-Based Hydrogels as Promising Biomaterials

Polysaccharides have emerged as a promising material for hydrogel preparation due to their biocompatibility, biodegradability, and low cost. This review focuses on polysaccharide-based hydrogels' synthesis, characterization, and applications. The various synthetic methods used to prepare polysaccharide-based hydrogels are discussed. The characterization techniques are also highlighted to evaluate the physical and chemical properties of polysaccharide-based hydrogels. Finally, the applications of SAPs in various fields are discussed, along with their potential benefits and limitations. Due to environmental concerns, this review shows a growing interest in developing bio-sourced hydrogels made from natural materials such as polysaccharides. SAPs have many beneficial properties, including good mechanical and morphological properties, thermal stability, biocompatibility, biodegradability, non-toxicity, abundance, economic viability, and good swelling ability. However, some challenges remain to be overcome, such as limiting the formulation complexity of some SAPs and establishing a general protocol for calculating their water absorption and retention capacity. Furthermore, the development of SAPs requires a multidisciplinary approach and research should focus on improving their synthesis, modification, and characterization as well as exploring their potential applications. Biocompatibility, biodegradation, and the regulatory approval pathway of SAPs should be carefully evaluated to ensure their safety and efficacy.

Application of polysaccharides for the encapsulation of beneficial microorganisms for agricultural purposes: A review

Intensive farming practices have increased the consumption of chemical-based pesticides and fertilizers thereby creating health issues for humans and animals and also causing a deterioration in the natural ecosystem. The promotion of biomaterials synthesis could potentially lead to the replacement of synthetic products and improve soil fertility, protect plants from pathogen attacks, and enhance the productivity of the agricultural sector resulting in less environmental pollution. Microbial bioengineering involving the use and improvement of encapsulation using polysaccharides has the required potential to address environmental issues and promote green chemistry. This article describes various encapsulation techniques and polysaccharides which have an immense applicable capability to encapsulate microbial cells. The review elucidates the factors that may result in a reduced viable cell count during encapsulation, particularly using the spray drying method, where a high temperature is required to dry the suspension, this may damage the microbial cells. The environmental advantage of the application of polysaccharides as carriers of beneficial microorganisms, which do not pose a risk for soil due to their full biodegradability, was also shown. The encapsulated microbial cells may assist in addressing certain environmental problems such as ameliorating the unfavourable effects of plant pests and pathogens, and promoting agricultural sustainability.

Dragon's Blood Sap Microencapsulation within Whey Protein Concentrate and Zein Using Electrospraying Assisted by Pressurized Gas Technology

Dragon's blood sap (DBS) obtained from the bark of Croton lechleri (Müll, Arg.) is a complex herbal remedy of pharmacological interest due to its high content in polyphenols, specifically proanthocyanidins. In this paper, electrospraying assisted by pressurized gas (EAPG) was first compared with freeze-drying to dry natural DBS. Secondly, EAPG was used for the first time to entrap natural DBS at room temperature into two different encapsulation matrices, i.e., whey protein concentrate (WPC) and zein (ZN), using different ratios of encapsulant material: bioactive compound, for instance 2:1 w/w and 1:1 w/w. The obtained particles were characterized in terms of morphology, total soluble polyphenolic content (TSP), antioxidant activity, and photo-oxidation stability during the 40 days of the experiment. Regarding the drying process, EAPG produced spherical particles with sizes of 11.38 ± 4.34 µm, whereas freeze-drying produced irregular particles with a broad particle size distribution. However, no significant differences were detected between DBS dried by EAPG or freeze-drying in TSP, antioxidant activity, and photo-oxidation stability, confirming that EAPG is a mild drying process suitable to dry sensitive bioactive compounds. Regarding the encapsulation process, the DBS encapsulated within the WPC produced smooth spherical microparticles, with average sizes of 11.28 ± 4.28 µm and 12.77 ± 4.54 µm for ratios 1:1 w/w and 2:1 w/w, respectively. The DBS was also encapsulated into ZN producing rough spherical microparticles, with average sizes of 6.37 ± 1.67 µm and 7.58 ± 2.54 µm for ratios 1:1 w/w and 2:1 w/w, respectively. The TSP was not affected during the encapsulation process. However, a slight reduction in antioxidant activity measured by DPPH was observed during encapsulation. An accelerated photo-oxidation test under ultraviolet light confirmed that the encapsulated DBS showed an increased oxidative stability in comparison with the non-encapsulated DBS, with the stability being enhanced for the ratio of 2:1 w/w. Among the encapsulating materials and according to the ATR-FTIR results, ZN showed increased protection against UV light. The obtained results demonstrate the potential of EAPG technology in the drying or encapsulation of sensitive natural bioactive compounds in a continuous process available at an industrial scale, which could be an alternative to freeze-drying.

Encapsulated starch characteristics and its shell matrix mechanisms controlling starch digestion

Encapsulated starch can be classified as physically inaccessible starch or type 1 resistant starch (RS1), which is produced by encapsulating starch granules within food matrices using various encapsulation techniques. Encapsulated starch has the potential to be used as a functional ingredient in low-/medium-glycemic index (GI) foods as it can help control glycemic and insulin responses. Despite its remarkable benefits, the relevant information related to entrapped starch and its application is still insufficient and needs further elucidation. The objective of this work is to present a comprehensive overview of the current techniques utilized for the preparation of encapsulated starch and its characteristics, thereby extending the fundamental knowledge. Furthermore, this review delves into the mechanisms governing starch hydrolysis regulated by shell matrices and provides the prospective utilization of encapsulated starch in food production.

Green preparation of 3D micronetwork eugenol-encapsuled porous starch for improving the performance of starch-based antibacterial film

In order to find a non-enzymatically treated alternative wall material with effective encapsulation properties, and to reduce the use of conventional non-biodegradable plastics, a novel 3D-micronetwork porous starch (3D-MPS) was created via a modified sacrificial template method to encapsulate eugenol (3D-EMPS) and used to incorporate with TiO₂-starch film, for significantly improving the performance of starch-based antibacterial film. At the template SiO₂ nanoparticles concentration of 0.1 %, the 3D-MPS exhibited anticipated alveolate structure with internal aperture of approximately 10 μm confirmed by SEM. With addition of 3D-EMPS, higher tensile strength (29.70 Mpa) and water barrier property (924 g/cm²·24 h) of the composite film was obtained. Moreover, molecular docking technique was used to model the intermolecular forces, which showed that the major forces maintaining the internal bonding of the composite film were hydrogen bonding and the interaction between eugenol and 3D-MPS skeleton in 3D-EMPS. Meanwhile, the composite film demonstrated the expected eugenol retardation and antimicrobial capacity against S. aureus, E. coli, and B. subtilis. Finally, the composite films were used for evaluating the feasibility in the actual food, which largely extended its shelf life compared to the negative control. This high-performance film revealed their potential for packaging materials application.

Starches in the encapsulation of plant active ingredients: state of the art and research trends

As a natural polymer, starches and their derivatives have received widespread attention in the cosmetic and pharmaceutical industries, particularly for their use as a coating material. In this sense, as an encapsulating agent, starches stand out, considering the number of compounds that they can trap. Additionally, they provide a nutritional contribution and may improve acceptance by patients. As such, this type of material may serve as an alternative to overcome gaps such as loss of activity of the active principles, low assimilation, or deterioration under environmental and physiological conditions. In this paper, we aim to present the state of the art and research trends on the use of starch as a wall material for the encapsulation of active principles of plant origin. It was found that the most-encapsulated active principles are essential oils and polyphenols; native or modified starches are typically used, either as the sole wall material or in combination with other polymers; and the most widely used methodology is spray drying. The reviewed studies indicate the potential of starches for their use in active ingredient encapsulation processes, improving their viability and expanding their range of applications in different industries, as well as showing a clearly increasing publication trend over the last 10 years.

Graphical abstract

Encapsulating biocontrol bacteria with starch as a safe and edible biopolymer to alleviate plant diseases: A review

Healthy foods with few artificial additives are in high demand among consumers. Preserving conventional pesticides, frequently used as chemicals to control phytopathogens, is challenging. Therefore, we proposed an innovative approach to protect agricultural products in this review. Biocontrol bacteria are safe alternatives with low stability and low efficiency in the free-form formulation. The encapsulation technique for covering active compounds (e.g., antimicrobials) represents a more efficient protection technology because encapsulation causes the controlled release of bioactive materials and reduces the application doses. Of the biopolymers able to form a capsule, starch exhibits several advantages, such as its ready availability, cost-effectively, edible, colorless, and tasteless. Nevertheless, the poor mechanical properties of starch can be improved with other edible biopolymers. In addition, applying formulations incorporated with more than one antimicrobial material offers synergistic effects. This review presented the starch-based capsules used to enclose antimicrobial agents as effective tools against phytopathogens.

Controlling the Interaction between Starchy Polyelectrolyte Layers for Adjusting Protein Release from Nanocapsules in a Simulated Gastrointestinal Tract

Orally delivered bioactive proteins face great challenges in the harsh environment of the upper gastrointestinal tract (GIT) in the field of functional foods based on bioactive proteins. Therefore, it is necessary to design carriers and delivery systems that have the potential to overcome the problem of lower bioaccessibility for protein cargoes. In this work, we present a starchy oral colon-targeting delivery system, capable of improving the release profile of the protein cargoes. The starchy oral colon-targeting delivery system was fabricated using layer-by-layer assembly of starchy polyelectrolytes (carboxymethyl anionic starch and spermine cationic starch) onto the surface of protein nanoparticles via electrostatic interaction. The dynamic change in the interaction between the starchy polyelectrolytes affected the shell aggregation structure and determined the release kinetics of nanocapsules in the GIT. Specifically, the stronger interactions between the starchy layers and the thicker and more compact shell layer kept the nanocapsule intact in the simulated gastric and intestinal fluids, better-protecting the protein from degradation by digestive fluids, thus avoiding the burst release effect in the SGF and SIF. However, the nanocapsule could quickly swell with the decreasing molecular interactions between starchy polyelectrolytes, increasing protein release (63.61%) in the simulated colonic fluid. Therefore, release behaviors of protein cargoes could be appropriately controlled by adjusting the number of deposited layers of pH-sensitive starchy polyelectrolytes on the nanocapsule. This could improve the bioaccessibility of oral targeted delivery of bioactive proteins to the colon.

Preparation of starch-based functional food nano-microcapsule delivery system and its controlled release characteristics

Most of the functional substances in food are absorbed in the small intestine, but before entering the small intestine, the strong acid and enzymes in the stomach limit the amount that can reach the small intestine. Therefore, in this paper, to develop a delivery system for functional food ingredients, maintain the biological activity of the ingredients, and deliver them to the target digestive organs, preparation of starch-based functional food nano-microcapsule delivery system and its controlled release characteristics were reviewed. Embedding unstable food active ingredients in starch-based nano-microcapsules can give the core material excellent stability and certain functional effects. Starch-based wall materials refer to a type of natural polymer material that uses starch or its derivatives to coat fat-soluble components with its hydrophobic cavities. The preparation methods of starch-based wall materials mainly include spray drying, extrusion, freeze drying, ultra-high pressure, coagulation, fluidized bed coating, molecular inclusion, chemical, and enzymic methods. The controlled release of functional food can be achieved by preparing starch-based nano-microcapsules to encapsulate the active agents. It has been reported that that compared with traditional embedding agents such as gelatin, acacia gum, and xanthan gum, starch-based functional food nano-microcapsule delivery system had many good properties, including improving antioxidant capacity, bioavailability, probiotics, and concealing bad flavors. From this review, we can learn which method should be chosen to prepare starch-based functional food nano-microcapsule delivery system and understand the mechanism of controlled release.

Polysaccharide-based nano-delivery systems for encapsulation, delivery, and pH-responsive release of bioactive ingredients

Polysaccharides are natural polymers isolated from plants, microorganisms, algae, and some animals they are composed of aldoses or ketoses linked by glycosidic bonds. Due to the affordability, abundance, safety, and functionality, polysaccharides are widely used in the foods and medicines to construct oral delivery systems for sensitive bioactive ingredients. In this article, the characteristics and applications of nanoscale polysaccharide-based delivery carriers are reviewed, including their ability to encapsulate, protect, and deliver bioactive ingredients. This review discusses the sources, characteristics, and functional properties of common food polysaccharides, including starch, pectin, chitosan, xanthan gum, and alginate. It also highlights the potential advantages of using polysaccharides for the construction of nano-delivery systems, such as nanoparticles, nanogels, nanoemulsions, nanocapsules, and nanofibers. Moreover, the application of delivery systems assembled from polysaccharides is summarized, with a focus on pH-responsive delivery of bioactives. There are some key findings and conclusions: Nanoscale polysaccharide delivery systems provide several advantages, including improved water-dispersibility, flavor masking, stability enhancement, reduced volatility, and controlled release; Polysaccharide nanocarriers can be used to construct pH-responsive delivery vehicles to achieve intestinal-targeted delivery and controlled release of bioactive ingredients; Polysaccharides can be used in combination with other biopolymers to form composite delivery systems with enhanced functional attributes.

Advancement of Protein- and Polysaccharide-Based Biopolymers for Anthocyanin Encapsulation

Although evidence shows that anthocyanins present promising health benefits, their poor stability still limits their applications in the food industry. Increasing the stability of anthocyanins is necessary to promote their absorption and metabolism and improve their health benefits. Numerous encapsulation approaches have been developed for the targeted release of anthocyanins to retain their bioactivities and ameliorate their unsatisfactory stability. Generally, choosing suitable edible encapsulation materials based on biopolymers is important in achieving the expected goals. This paper presented an ambitious task of summarizing the current understanding and challenges of biopolymer-based anthocyanin encapsulation in detail. The food-grade edible microencapsulation materials, especially for proteins and polysaccharides, should be employed to improve the stability of anthocyanins for effective application in the food industry. The influence factors involved in anthocyanin stability were systematically reviewed and highlighted. Food-grade proteins, especially whey protein, caseinate, gelatin, and soy protein, are attractive in the food industry for encapsulation owing to the improvement of stability and their health benefits. Polysaccharides, such as starch, pectin, chitosan, cellulose, mucilages, and their derivatives, are used as encapsulation materials because of their satisfactory biocompatibility and biodegradability. Moreover, the challenges and perspectives for the application of anthocyanins in food products were presented based on current knowledge. The proposed perspective can provide new insights into the amelioration of anthocyanin bioavailability by edible biopolymer encapsulation.

Interactions between Ascophyllum nodosum Seaweeds Polyphenols and Native and Gelled Corn Starches

The effect of several blending procedures between Ascophyllum nodosum seaweed flour (AF) and corn starch (CS) on the interactions between polyphenols and starch was studied in this paper. These methods comprised the blending of AF with native starch (NT) with previously gelled starch gel (GL) and promoting the gelling of corn starch in the presence of AF (CGL). Different AF-CS (g/g) ratios (from 1:0.5 to 1:25) were studied. The liquid phase was chemically characterized by polyphenols (TPC) and carbohydrates content. The antioxidant activity of the liquid phase after achieving the solid-liquid equilibrium was determined by DPPH, ABTS, and FRAP methods. The solid phase was characterized by FT-IR and SEM techniques. The Halsey model successfully fitted the equilibrium TPC in liquid and polyphenols adsorbed/retained by the solid phase of tested systems. NT samples showed lower polyphenols sorption than gelled samples. The differences found between samples obtained with GL and CGL methods suggested different interactions between polyphenols and starch. Specifically, physisorption is predominant in the case of the GL method, and molecular trapping of polyphenols in the starch gel structure is relevant for the CGL method. Results allowed us to determine the enhancement of the retention of polyphenols to achieve starchy foods with high bioactivity.

A review of factors affecting the stability of zein-based nanoparticles loaded with bioactive compounds: from construction to application

Zein-based nanoparticles loaded with bioactive compounds have positive prospects in the food industry, but an important limiting factor for development is colloidal instability. Currently, extensive researches are focused on solving the instability of zein nanoparticles, but since the beginning of the studies, there has not been a summary of the factors affecting the stability of zein-based nanoparticles. In the present work, the factors were reviewed comprehensively from the perspective of carrier construction and application evaluation. The former mainly includes type, quantity, and characteristics of biopolymer, the mass ratio of biopolymer/bioactive compound to zein, blending sequence of biopolymer, and location of encapsulated bioactive compounds. The latter mainly includes pH, heating, ionic strength, storage, freeze-drying, and gastrointestinal digestion. The former is the prerequisite for the success of the latter. The challenge is that stability research is limited to the laboratory level, and it is difficult to ensure that the stability results are suitable for commercial food matrices due to their complexity. At the laboratory level, the future trends are the influence of external energy and the cross-complexity and uniformity of stability research. The review is expected to provide systematic understanding and guidance for the development of zein-based nanoparticles stability.

Polysaccharides as wall materials in spray-dried microencapsulation of bioactive compounds: Physicochemical properties and characterization

Natural bioactive compounds (BCs) are types of chemicals found in plants and certain foods that promote good health, however they are sensitive to processing and environmental conditions. Microencapsulation by spray drying is a widely used and cost-effective approach to create a coating layer to surround and protect BCs and control their release, enabling the production of high functional products/ingredients with extended shelf life. In this process, wall materials determine protection efficiency, and physical properties, bioavailability, and storage stability of microencapsulated products. Therefore, an understanding of physicochemical properties of wall materials is essential for the successful and effective spray-dried microencapsulation process. Typically, polysaccharide-based wall materials are generated from more sustainable sources and have a wider range of physicochemical properties and applications compared to their protein-based counterparts. In this review, we highlight the essential physicochemical properties of polysaccharide-based wall materials for spray-dried microencapsulation of BCs including solubility, thermal stability, and emulsifying properties, rheological and film forming properties. We provide further insight into possibilities for the chemical structure modification of native wall materials and their controlled release behaviors. Finally, we summarize the most recent studies involving polysaccharide biopolymers as wall materials and/or emulsifiers in spray-dried microencapsulation of BCs.

Sulfur functionality-modified starches: Review of synthesis strategies, properties, and applications

Starch is the second most abundant naturally-occurring polymer after cellulose that possess superior physicochemical and biological features with numerous practical applications ranging from industrial to biomedical. Despite, native starch suffer from some drawbacks, including difficult processability, low shear and thermal stability, weak mechanical properties, and tendency to easily retrograde and undergo syneresis. Therefore, modification of native starch is necessary for circumvent the above-mentioned problems and expanding application ranges. This natural polymer can be modified using chemical, physical, enzymatic, and genetic engineering strategies. Amongst, chemical approaches have received more attention owing to enhancing physicochemical and biological features that lead to higher performance than those of the other strategies. In this context, incorporation of sulfur functionality-containing groups (sulfonation and sulfation) can be considered as an efficient approach due to significant enhancement in physiochemical properties, including zeta potential (move to negative values), molecular weight, processiability (e.g., solubility and meltability), and rheology. Furthermore, this strategy can modified some biological features, such as hemocompatibility, protein sorption, biostability, adhesion and proliferation of numerous cells, antithrombogenicity, antiinflammatory, antiviral, antimicrobial, antioxidant, antifungal, anticoagulant and antifouling properties. Accordingly, this review highlight's the synthesis strategies, physiochemical and biological properties, as well as applications of sulfur functionality-modified starches in numerous practical fields.

Spray-drying microencapsulation of tea extracts using green starch, alginate or carrageenan as carrier materials

Tea industry generates many by-products which could be used to produce and incorporate bioactive tea extracts (TE) into nutraceuticals, cosmetics and/or clinical applications. However, sensibility to external factors is a major disadvantage hindering its utilization. This study deals with the implementation and characterization of suitable biopolymer delivery systems based on starch, carrageenan or alginate, as microencapsulation, to stabilize and protect TE through innovative thin-carbohydrate-coated formulations. TE were spray-dried and microencapsulated in recycled carrier materials (alginate, carrageenan or starch). Product yields varied from 55 to 58%. High microencapsulation and loading efficiencies were achieved (60-93% and 65-84%, respectively). Antioxidant capacity varied from 32 to 46 g Trolox/100 g extract, within different carrier-systems; which also showed promising rheological and UV-protective properties when transformed into gels. Total phenolic content, particle-size distribution, HPSEC-analysis, SEM-analysis and FTIR-analysis were also performed. In sum, this paper characterizes and discusses the high potential of these recycled carbohydrate-coated microparticles for future applications.

Influence of the Addition of Extruded Endogenous Tartary Buckwheat Starch on Processing and Quality of Gluten-Free Noodles

Extruded starch could be used as a thickener for food processing due to its pre-gel properties. This study aimed to explore the influence of the addition of extruded endogenous Tartary buckwheat starch (ES) on the process and quality of gluten-free noodles. ES was mixed with Tartary buckwheat flour in different proportions (10–40%) to prepare the blended flour and noodles. When the content of ES was increased, the swelling power of blended flour at 90 °C had no significant changes, and the decrease in peak viscosity of blended flour was reduced. This indicated that the high-content ES could afford better thermal stability for blended flour and inhibit the swelling ability. The higher level of ES was beneficial to the formation and stabilization of dough, and the improvement of noodle tensile strength. Furthermore, there was no difference in cooking loss between noodles with 30% and 40% ES addition. The microstructure and water distribution of the noodles prepared by blended flour indicated that the gel-entrapped structure organized by the higher content ES could be closely related to the above results. In conclusion, higher ES could contribute to improving the processing properties and quality of noodles.