Chemical modification of β-cyclodextrin towards hydrogel formation

One pot preparation of magnetic benzylated cyclodextrin-based hyper-cross-linked polymer for phthalate esters extraction from tea beverages

The increasing popularity of packaged beverages has raised concerns about the health risks associated with phthalate esters (PAEs), which are commonly found in plastics used for packaging. This study presents an eco-friendly approach for synthesizing a magnetic benzylated cyclodextrin-based hyper-cross-linked polymer (Fe3O4/BnCD-HCPP), in which FeCl3serves both as a catalyst for the Friedel-Crafts reaction and as an iron source for Fe3O4 nanoparticles. The Fe3O4/BnCD-HCPP composite was used as an adsorbent to extract of PAEs from tea beverages via magnetic solid-phase extraction, followed by gas chromatography-mass spectrometry analysis. The optimized method exhibited excellent sensitivity, with limits of detection ranging from 0.1 to 0.5 μg L-1. Additionally, the method achieved high recovery rates, ranging from 81.5 % to 118.5 %, and demonstrated precision (relative standard deviations <11.6 %) for PAEs spiked into tea beverages. Mechanistic studies indicated that the high extraction efficiency of Fe3O4/BnCD-HCPP for PAEs is due to its favorable pore size distribution, large specific surface area, and multiple interactions, including π-π stacking, hydrophobic force, and host-guest inclusion. This research not only provides an effective method for determining PAEs in complex aqueous matrices but also introduces a novel and sustainable approach for the fabrication of magnetic composites.

Functionalized amino acid-based injectable hydrogels for sustained drug delivery

Drug delivery vehicles optimize therapeutic outcomes by enhancing drug efficacy, minimizing side effects, and providing controlled release. Injectable hydrogels supersede conventional ones in the field of drug delivery owing to their less invasive administration and improved targeting. However, they face challenges such as low biodegradability and biocompatibility, potentially compromising their effectiveness. To address these limitations, a modified amino acid-based pH-responsive injectable shear-thinning hydrogel cl-β-CD-g-p(Gly-MA) has been developed as an efficient drug carrier. In the two-step synthetic approaches, first, the well-known amino acid glycine (Gly) is modified to form glycine methacrylate (Gly-MA). Afterward, Gly-MA is chemically crosslinked with β-cyclodextrin (β-CD), an oligosaccharide, using an ethylene glycol dimethacrylate (EGDMA) crosslinker. The presence of these biomaterials as building blocks enhances the biocompatibility, hemocompatibility, and biodegradability of the hydrogel. They also reduce the risk of immunogenicity. The unique property of easy injectability enables minimally invasive administration. This feature also helps prolong drug retention at the target site, further optimizing drug delivery efficiency. Moreover, the pH-responsive feature of the developed cl-β-CD-g-p(Gly-MA) hydrogel ensures controlled drug release in response to the physiological conditions of the target site, enhancing therapeutic efficacy. The study focuses on investigating the in vitro loading and release of diclofenac sodium (DS), a non-steroidal anti-inflammatory drug (NSAID) commonly used to treat arthritic pain and inflammation.

Crosslinked starch/konjac glucomannan active films containing encapsulated thymol for cherry tomatoes preservation

Active films attracted growing interest due to environmental protection and safety of food packaging materials. In this study, we developed cross-linking corn starch/konjac glucomannan active films by incorporating thymol microcapsules (TMs). FTIR, XRD and SEM results indicated the formation of molecular interactions and good compatibility between cross-linking matrixes and TMs. The cross-linking effect with citric acid (CA) significantly reduced the water vapor permeability and swelling rate of the films. Addition of TMs in the composite films improved mechanical property, moisture content, light barrier property and antibacterial activities against E. coli and S. aureus. Additionally, the MCSK4 films effectively reduced weight loss, maintained firmness, and enhanced total phenolic content and total flavonoid content of cherry tomatoes. The synergistic effects of CA and TMs improved the structural and functional properties of composite films, providing a potential application for fruit and vegetable preservation.

Advances in conducting nanocomposite hydrogels for wearable biomonitoring

Recent advancements in wearable biosensors and bioelectronics have led to innovative designs for personalized health management devices, with biocompatible conducting nanocomposite hydrogels emerging as a promising building block for soft electronics engineering. In this review, we provide a comprehensive framework for advancing biosensors using these engineered nanocomposite hydrogels, highlighting their unique properties such as high electrical conductivity, flexibility, self-healing, biocompatibility, biodegradability, and tunable architecture, broadening their biomedical applications. We summarize key properties of nanocomposite hydrogels for thermal, biomechanical, electrophysiological, and biochemical sensing applications on the human body, recent progress in nanocomposite hydrogel design and synthesis, and the latest technologies in developing flexible and wearable devices. This review covers various sensor types, including strain, physiological, and electrochemical sensors, and explores their potential applications in personalized healthcare, from daily activity monitoring to versatile electronic skin applications. Furthermore, we highlight the blueprints of design, working procedures, performance, detection limits, and sensitivity of these soft devices. Finally, we address challenges, prospects, and future outlook for advanced nanocomposite hydrogels in wearable sensors, aiming to provide a comprehensive overview of their current state and future potential in healthcare applications.

Unveiling cyclodextrin conjugation as multidentate excipients: An exploratory journey across industries

The discovery of branched molecules like dextrin by Schardinger in 1903 marked the inception of cyclodextrin (CD) utilization, catalyzing its journey from laboratory experimentation to widespread commercialization within the pharmaceutical industry. CD, a cyclic oligosaccharide containing glucopyranose units, acts as a versatile guest molecule, forming inclusion complexes (ICs) with various host molecules. Computational studies have become instrumental in elucidating the intricate interactions between β-CD and guest molecules, enabling the prediction of binding energy, forces, affinity, and complex stability. The computational approach has established robust correlations with experimental outcomes, enhancing our understanding of CD-mediated complexation phenomena. This comprehensive review delves into the CD based Inclusion complex (CDIC) formation and a myriad of components, including drug molecules, amino acids, vitamins, and volatile oils. These complexes find applications across diverse industries, ranging from pharmaceuticals to nutraceuticals, food, fragrance, and beyond. In the pharmaceutical realm, β- CDICs offer innovative solutions for enhancing drug solubility, stability, and bioavailability, thus overcoming formulation challenges associated with poorly water-soluble drugs. Furthermore, the versatility of CDs extends beyond pharmaceuticals, with applications in the encapsulation of phytoactive compounds in nutraceuticals and the enhancing flavor, aroma in food and fragrance industries. This review underscores the pivotal role of CDs conjugation in modern drug delivery systems, emphasizing the importance of interdisciplinary approaches that integrate computational modeling with experimental validation. As the pharmaceutical landscape continues to evolve, CDs-based formulations stand poised to drive innovation and address the ever-growing demand for efficacious and patient-friendly drug delivery solutions.

A comprehensive review of β-cyclodextrin polymer nanocomposites exploration for heavy metal removal from wastewater

This review focuses on the application of β-cyclodextrin (β-CD) polymer nanocomposites (NCs) in the heavy metals (HMs) removal from contaminated water sources. This manuscript's originality consists of an in-depth analysis of recent advances in using β-cyclodextrin nanocomposites (β-CD-NCs) to remove HMs from wastewater, highlighting literature gaps, innovations, and challenges in this field, suggesting perspectives on existing theories, and outlining implications for future research directions. Combining nanoparticles with the β-CD polymer yields stable, reusable β-CD-NCs that are effective and efficient in HM adsorption. The article reviews the various techniques for synthesizing β-CD-NCs and their structural characterization. It also includes processing and functionalization strategies to optimize binding capacity and selectivity for specific HMs. The paper reviews mechanisms underpinning HM adsorption through complexation, ion exchange, and electrostatic interactions. It also reviews how adsorption efficiency is affected by different environmental conditions, such as variations in pH, temperature, and competing ions. This will enable case studies on the applications of β-CD-NCs, particularly for addressing global water pollution. Finally, the current limitations and future perspectives are considered, focusing on the further research needed to optimize these materials for sustainable and cost-effective HM removal on a large scale.

DFT Study of Interaction between Teriflunomide and β-cyclodextrin

INTRODUCTION

This study employs Density Functional Theory (DFT) to investigate the interactions between Teriflunomide and β-cyclodextrin in the gas phase.

METHODS

The non-bonded interaction effects of the Teriflunomide compound with β-cyclodextrin on the chemical shift tensors, electronic properties, and natural charge were also observed. An analysis of the natural bond orbital (NBO) indicated that the molecule β-cyclodextrin as an electron donor functions while Teriflunomide functions as an electron acceptor in the complex β-cyclodextrin/Teriflunomide.

RESULTS

The electronic spectra of the Teriflunomide drug and complex β-cyclodextrin/ Teriflunomide were calculated by Time-Dependent Density Functional Theory (TDDFT) to investigate the adsorption effects of the Teriflunomide drug over β-cyclodextrin on maximum wavelength.

CONCLUSION

As a result, the possibility of the use of β-cyclodextrin for Teriflunomide delivery to the diseased cells has been established.

Stimuli-responsive, methyl cellulose-based, interpenetrating network hydrogels: Non-covalent design, injectability, and controlled release

This paper demonstrates the molecular design of stimuli-responsive, methyl cellulose-based, injectable hydrogels consisting of two orthogonal supramolecular networks. Rapidly injectable hydrogels that undergo autonomous gelation without permanent cross-links are crucial for biomedical applications due to minimal invasiveness, adaptability to irregular target sites, and precise spatiotemporal control. However, they often lack sufficient mechanical strength, physicochemical stability, and high biocompatibility. Herein, we develop a molecular design of a non-covalent double-network system by strategically incorporating specific host-guest cross-linking sites into a thermo-responsive network, which is reinforced by interpenetration with a cellulose-based network via their sequential formation. The resulting hydrogel, composed of non-cytotoxic materials, demonstrates high cell viability (>90 %) until its concentration of 25 mg mL-1, rapid self-healing within 1 min, suitable injection pressure (1.1 kPa), and drug release behavior controllable by heat, chemicals, or ultrasound. Therefore, the hydrogel could be loaded with diclofenac (3.5 mg mL-1), a non-steroidal anti-inflammatory drug, and treat osteoarthritis when injected into a rat knee joint, achieving results comparable to those in a control group without osteoarthritis. This system thus holds promise for the delivery of various drugs as a responsive vector, offering synergistic effects via the inclusion of functional polymeric networks or exogenous additives for bio- or environment-related applications.

Physically crosslinked chitosan/αβ-glycerophosphate hydrogels enhanced by surface-modified cyclodextrin: An efficient strategy for controlled drug release

This study reports physically crosslinked chitosan/αβ-glycerophosphate (CS/GP) hydrogels containing surface-modified cyclodextrin for efficient controlled drug release. Highly water-soluble β-cyclodextrin-grafted L-serine (CD-g-Ser) compounds were synthesized, and employed as an effective carrier of berberine hydrochloride (Ber) for CS/GP hydrogels. Various characterizations, including gelation time determination, scanning electron microscopy, and viscosity measurement, indicated that the introduction of CD-g-Ser led to increased crosslinking degree, improved temperature sensitivity, and shortened sol-gel phase transition time of the hydrogel. Meanwhile, the sustained release ability for Ber was achieved due to the hydrophobic association between cyclodextrin and Ber. It was observed that within 4 h, the hydrogel containing CD-g-Ser released 40 % of Ber, while the CS/GP hydrogel without CD-g-Ser released 65 % of Ber. Furthermore, in vitro bacteriostasis experiments confirmed the drug-loaded hydrogel had an excellent antibacterial effect against E. coli and S. aureus (diameter of the inhibition zone up to (16.4 and 34.7) mm, respectively), low hemolysis rate (<2 %), and high cell viability (>90 %). The findings indicate that the physical crosslinked CS hydrogel can be used as a new drug delivery system, and its excellent antibacterial effect makes it a potential wound dressing candidate.

Enhancing Cannabinoid Bioavailability in Pain Management: The Role of Cyclodextrins

Chronic pain (CP), including pain related to cancer, affects approximately 2 billion people worldwide, significantly diminishing quality of life and imposing socio-economic burdens. Current treatments often provide limited relief and may cause adverse effects, demanding more effective alternatives. Natural compounds from Cannabis sativa L., particularly cannabinoids like THC and CBD, exhibit analgesic and anti-inflammatory properties, but their therapeutic use is restricted by poor solubility and low bioavailability. Cyclodextrins (CDs) and cyclic oligosaccharides may encapsulate hydrophobic drugs in order to enhance their solubility and stability, offering a promising solution to these challenges. This study explores the formation of CD inclusion complexes with cannabinoids and specific terpenes, such as D-limonene (LIM), beta-caryophyllene (BCP), and gamma-terpinene (γ-TPN), aiming to improve pharmacokinetic profiles and therapeutic efficacy. We discuss analytical techniques for characterizing these complexes and their mechanisms of action, highlighting the potential of CDs to optimize drug formulations. The integration of CDs in cannabinoid therapies may enhance patient compliance and treatment outcomes in CP management. Future research should focus on innovative formulations and delivery systems to maximize the clinical applications of those compounds.

β-Cyclodextrin-derived diallylamine salt: Synthesis and its copolymerizations

A diallyl amine salt monomer bearing a β-CD substituent was cyclopolymerized for the first time. The reaction of 6-O-toluenesulfonyl-β-cyclodextrin [(C6H10O5)6-(C5H7)]-CH2OTs with diallylamine followed by protonation afforded the diallylamine salt monomer [(C6H10O5)6-(C5H7)]-CH2NH+(CH2CH=CH2)2 Cl-] (I). The cyclopolymerization of monomer I and its copolymerization with monomer [Me2N+(CH2CH=CH2)2 Cl-] (II), [-O2CCH2NH+(CH2CH=CH2)2] (III), [H2O3PCH2NH+(CH2CH=CH2)2 Cl-] (IV) or [HO2CCH2CH(CO2H)NH+(CH2CH=CH2)2 Cl-] (V) yielded a series of copolymers having residues of β-CD and glycine or methyl phosphonate or aspartic acid. Terpolymerization in the presence of SO2 afforded polymers with alternating placements of the SO2 units. The solution properties of the pH-responsive polyzwitterions, including their viscosity, were examined. The water-insoluble terpolymer I/V/SO2 with 20 mol% β-CD residues removed the organic micropollutant 2-naphthol from an aqueous system via host/guest complexation. This work paves the way for the possible synthesis of cross-linked polymers that can simultaneously remove organic micropollutants and toxic metal ions (by complexation with the chelating glycine, aspartic acid, and aminomethyl phosphonate ligands) from contaminated aqueous systems.

Conducting polymer hydrogels based on supramolecular strategies for wearable sensors

Conductive polymer hydrogels (CPHs) are gaining considerable attention in developing wearable electronics due to their unique combination of high conductivity and softness. However, in the absence of interactions, the incompatibility between hydrophobic conductive polymers (CPs) and hydrophilic polymer networks gives rise to inadequate bonding between CPs and hydrogel matrices, thereby significantly impairing the mechanical and electrical properties of CPHs and constraining their utility in wearable electronic sensors. Therefore, to endow CPHs with good performance, it is necessary to ensure a stable and robust combination between the hydrogel network and CPs. Encouragingly, recent research has demonstrated that incorporating supramolecular interactions into CPHs enhances the polymer network interaction, improving overall CPH performance. However, a comprehensive review focusing on supramolecular CPH (SCPH) for wearable sensing applications is currently lacking. This review provides a summary of the typical supramolecular strategies employed in the development of high-performance CPHs and elucidates the properties of SCPHs that are closely associated with wearable sensors. Moreover, the review discusses the fabrication methods and classification of SCPH sensors, while also exploring the latest application scenarios for SCPH wearable sensors. Finally, it discusses the challenges of SCPH sensors and offers suggestions for future advancements.

β-Cyclodextrin/carbon dots-grafted cellulose nanofibrils hydrogel for enhanced adsorption and fluorescence detection of levofloxacin

In this study, a novel hydrogel, β-cyclodextrin/carbon dots-grafted cellulose nanofibrils hydrogel (βCCH), was fabricated for removal and fluorescence determination of levofloxacin (LEV). A comprehensive analysis was performed to characterize its physicochemical properties. Batch adsorption experiments were conducted, revealing that βCCH reached a maximum adsorption capacity of 1376.9 mg/g, consistent with both Langmuir and pseudo-second-order models, suggesting that the adsorption process of LEV on βCCH was primarily driven by chemical adsorption. The removal efficiency of βCCH was 99.2 % under the fixed conditions (pH: 6, initial concentration: 20 mg/L, contact time: 300 min, temperature: 25 °C). The removal efficiency of βCCH for LEV still achieved 97.3 % after five adsorption-desorption cycles. By using βCCH as a fluorescent probe for LEV, a fast and sensitive method was established with linear ranges of 1-120 mg/L and 0.2-1.0 μg/L and a limit of detection (LOD) as low as 0.09 μg/L. The viability of βCCH was estimated based on the economic analysis of the synthesis process and the removal of LEV, demonstrating that βCCH was more cost-effective than commercial activated carbon. This study provides a novel approach for preparing a promising antibiotic detection and adsorption material with the advantages of stability, and cost-effectiveness.

Preparation and Characterization of Responsive Cellulose-Based Gel Microspheres for Enhanced Oil Recovery

As an important means to enhance oil recovery, ternary composite flooding (ASP flooding for short) technology has achieved remarkable results in Daqing Oilfield. Alkalis, surfactants and polymers are mixed in specific proportions and injected into the reservoir to give full play to the synergistic effect of each component, which can effectively enhance the fluidity of crude oil and greatly improve the oil recovery. At present, the technology for further improving oil recovery after ternary composite flooding is not mature and belongs to the stage of technical exploration. The presence of alkaline substances significantly alters the reservoir's physical properties and causes considerable corrosion to the equipment used in its development. This is detrimental to both the environment and production. Therefore, it is necessary to develop green displacement control agents. In the reservoir environment post-ASP flooding, 2-(methylamino)ethyl methacrylate and glycidyl methacrylate were chosen as monomers to synthesize a polymer responsive to alkali, and then grafted with cellulose nanocrystals to form microspheres of alkali-resistant swelling hydrogel. Cellulose nanocrystals (CNCs) modified with functional groups and other materials were utilized to fabricate hydrogel microspheres. The product's structure was characterized and validated using Fourier transform infrared spectroscopy and X-ray diffraction. The infrared spectrum revealed characteristic absorption peaks of CNCs at 1165 cm-1, 1577 cm-1, 1746 cm-1, and 3342 cm-1. The diffraction spectrum corroborated the findings of the infrared analysis, indicating that the functional modification occurred on the CNC surface. After evaluating the swelling and erosion resistance of the hydrogel microspheres under various alkaline conditions, the optimal particle size for compatibility with the target reservoir was determined to be 6 μm. The potential of cellulose-based gel microspheres to enhance oil recovery was assessed through the evaluation of Zeta potential and laboratory physical simulations of oil displacement. The study revealed that the absolute value of the Zeta potential for gel microspheres exceeds 30 in an alkaline environment with pH values ranging from 7 to 14, exhibiting a phenomenon where stronger alkalinity correlates with a greater absolute value of Zeta potential. The dispersion stability spans from good to excellent. The laboratory oil displacement simulation experiment was conducted using a cellulose-based gel microsphere system following weak alkali ASP flooding within the pH value range from 7 to 10. The experimental interventions yielded recovery rates of 2.98%, 3.20%, 3.31%, and 3.38%, respectively. The study indicates that cellulose-based gel microspheres exhibit good adaptability in alkaline reservoirs. This research offers a theoretical foundation and experimental approaches to enhance oil recovery techniques post-ASP flooding.

Macrocycle-Based Supramolecular Drug Delivery Systems: A Concise Review

Efficient delivery of therapeutic agents to the lesion site or specific cells is an important way to achieve "toxicity reduction and efficacy enhancement". Macrocycles have always provided many novel ideas for drug or gene loading and delivery processes. Specifically, macrocycles represented by crown ethers, cyclodextrins, cucurbit[n]urils, calix[n]arenes, and pillar[n]arenes have unique properties, which are different cavity structures, good biocompatibility, and good stability. Benefited from these diverse properties, a variety of supramolecular drug delivery systems can be designed and constructed to effectively improve the physical and chemical properties of guest molecules as needed. This review provides an outlook on the current application status and main limitations of macrocycles in supramolecular drug delivery systems.

A Highly Stretchable, Conductive, and Transparent Bioadhesive Hydrogel as a Flexible Sensor for Enhanced Real-Time Human Health Monitoring

Real-time continuous monitoring of non-cognitive markers is crucial for the early detection and management of chronic conditions. Current diagnostic methods are often invasive and not suitable for at-home monitoring. An elastic, adhesive, and biodegradable hydrogel-based wearable sensor with superior accuracy and durability for monitoring real-time human health is developed. Employing a supramolecular engineering strategy, a pseudo-slide-ring hydrogel is synthesized by combining polyacrylamide (pAAm), β-cyclodextrin (β-CD), and poly 2-(acryloyloxy)ethyltrimethylammonium chloride (AETAc) bio ionic liquid (Bio-IL). This novel approach decouples conflicting mechano-chemical effects arising from different molecular building blocks and provides a balance of mechanical toughness (1.1 × 106 Jm-3), flexibility, conductivity (≈0.29 S m-1), and tissue adhesion (≈27 kPa), along with rapid self-healing and remarkable stretchability (≈3000%). Unlike traditional hydrogels, the one-pot synthesis avoids chemical crosslinkers and metallic nanofillers, reducing cytotoxicity. While the pAAm provides mechanical strength, the formation of the pseudo-slide-ring structure ensures high stretchability and flexibility. Combining pAAm with β-CD and pAETAc enhances biocompatibility and biodegradability, as confirmed by in vitro and in vivo studies. The hydrogel also offers transparency, passive-cooling, ultraviolet (UV)-shielding, and 3D printability, enhancing its practicality for everyday use. The engineered sensor demonstratesimproved efficiency, stability, and sensitivity in motion/haptic sensing, advancing real-time human healthcare monitoring.

A quadruple-stimuli responsive supramolecular hydrogel constructed from a poly(acrylic acid) derivative and β-cyclodextrin dimer

The fabrication of stimulus-responsive supramolecular hydrogels as smart materials has attracted much attention in recent years. However, the multi-stimuli responsiveness often requires complicated chemical synthesis and rational molecular design. Herein, a quadruple-stimuli responsive supramolecular hydrogel was designed through the host-guest interaction between a β-CD dimer and a methoxy-azobenzene (mAzo) and ferrocene (Fc) grafted poly(acrylic acid) derivative, as well as through the electrostatic interaction of negatively charged carboxyl side groups. Owing to the dynamic properties of the host-guest and electrostatic interactions, reversible sol-gel transition can be triggered by various stimuli, including temperature, light irradiations, pH changes and chemical redox reagents. As a result, the release of rhodamine B loaded in the hydrogel can be accelerated by green light irradiation, oxidizing agents and low pH, demonstrating potential applications in biomedical materials.

Covalent modification of γ-cyclodextrin with geraniol: An antibacterial agent with good thermal stability, solubility and biocompatibility

Geraniol (Ger) is an essential oil molecule with excellent biological activity. High hydrophobicity and volatility limit its practical application. Cyclodextrins (CDs) are water-soluble cyclic oligosaccharides with hydrophobic cavities. Physical encapsulation of CDs to improve the solubility and stability of essential oil molecules is not satisfactory. Therefore, this study synthesized the γ-CD derivative (γ-CD-Ger) by grafting Ger onto γ-CD using a bromide-mediated method. Compared to the inclusion complexes (γ-CD/Ger) formed by both, the derivatives exhibit better solubility and thermal stability. The derivative has better antibacterial activity when the ratio of γ-CD to Ger was 1:2. In addition, the derivatives did not exhibit cytotoxic and hemolytic properties. These results indicate that this research provides a water-soluble antibacterial agent with a wide range of promising applications and offers new ideas for the application of alcohol hydrophobic molecules in aqueous systems.

Novel Binder with Cross-Linking Reconfiguration Functionality for Silicon Anodes of Lithium-Ion Batteries

Silicon is expected to be used as a high theoretical capacity anode material in lithium-ion batteries with high energy densities. However, the huge volume change incurred when silicon de-embeds lithium ions, leading to destruction of the electrode structure and a rapid reduction in battery capacity. Although binders play a key role in maintaining the stability of the electrode structure, commonly used binders cannot withstand the large volume expansion of the silicon. To alleviate this problem, we propose a PGC cross-linking reconfiguration binder based on poly(acrylic acid) (PAA), gelatin (GN), and β-cyclodextrin (β-CD). Within PGC, PAA supports the main chain and provides a large number of carboxyl groups (-COOH), GN provides rich carboxyl and amide groups that can form a cross-linking network with PAA, and β-CD offers rich hydroxyl groups and a cone-shaped hollow ring structure that can alleviate stress accumulation in the polymer chain by forming a new dynamic cross-linking coordination conformation during stretching. In the half cell, the silicon negative prepared by the PGC binder exhibited a high specific capacity and capacity maintenance ratio, and the specific capacity of the silicon negative electrode prepared by the PGC binder is still 1809 mAh g-1 and the capacity maintenance ratio is 73.76% following 200 cycles at 2 A g-1 current density, indicating that PGC sufficiently maintains the silicon negative structure during the battery cycle. The PGC binder has a simple preparation method and good capacity retention ability, making it a potential reference for the further development of silicon negative electrodes.

Preparation of environmentally friendly, high strength, adhesion and stability hydrogel based on lignocellulose framework

Hydrogels are extensively utilized in the fields of electronic skin, environmental monitoring, biological dressings due to their excellent flexibility and conductivity. However, traditional hydrogel materials possess drawbacks such as environmental toxicity, low strength, poor stability, and water loss deactivation, which limited its frequent applications. Here, a flexible conductive hydrogel called wood-based DES hydrogel (WDH) with high strength, high adhesion, high stability, and high sensitivity was successfully synthesized by using environmentally friendly lignocellulose as skeleton and deep eutectic solvent as matrix. The strength of WDH prepared from lignocellulose framework is approximately 50 times higher than poly deep eutectic solvent hydrogel, and about 4.5 times higher than that prepared from cellulose skeleton. The WDH exhibits stable adhesion to most common materials and demonstrates exceptional dimensional stability. Its conductivity remains unaffected by water, even after prolonged exposure to air, maintaining a value of 0.0245 S/m. The anisotropy inherent in the system results in three distinct linear sensing intervals for WDH, exhibiting a maximum sensitivity of 5.45. This paper verified the advantages of lignocellulose framework in improving the strength and stability of hydrogels, which provided a new strategy for the development of sensor materials.

Recent advances in biopolymer-based hydrogels and their potential biomedical applications

Hydrogels are three-dimensional networks of polymer chains containing large amounts of water in their structure. Hydrogels have received significant attention in biomedical applications owing to their attractive physicochemical properties, including flexibility, softness, biodegradability, and biocompatibility. Different natural and synthetic polymers have been intensely explored in developing hydrogels for the desired applications. Biopolymers-based hydrogels have advantages over synthetic polymers regarding improved cellular activity and weak immune response. These properties can be further improved by grafting with other polymers or adding nanomaterials, and they structurally mimic the living tissue environments, which opens their broad applicability. The hydrogels can be physically or chemically cross-linked depending on the structure. The use of different biopolymers-based hydrogels in biomedical applications has been reviewed and discussed earlier. However, no report is still available to comprehensively introduce the synthesis, advantages, disadvantages, and biomedical applications of biopolymers-based hydrogels from the material point of view. Herein, we systematically overview different synthesis methods of hydrogels and provide a holistic approach to biopolymers-based hydrogels for biomedical applications, especially in bone regeneration, wound healing, drug delivery, bioimaging, and therapy. The current challenges and prospects of biopolymers-based hydrogels are highlighted rationally, giving an insight into the progress of these hydrogels and their practical applications.

Engineered cyclodextrin-based supramolecular hydrogels for biomedical applications

Cyclodextrin (CD)-based supramolecular hydrogels are polymer network systems with the ability to rapidly form reversible three-dimensional porous structures through multiple cross-linking methods, offering potential applications in drug delivery. Although CD-based supramolecular hydrogels have been increasingly used in a wide range of applications in recent years, a comprehensive description of their structure, mechanical property modulation, drug loading, delivery, and applications in biomedical fields from a cross-linking perspective is lacking. To provide a comprehensive overview of CD-based supramolecular hydrogels, this review systematically describes their design, regulation of mechanical properties, modes of drug loading and release, and their roles in various biomedical fields, particularly oncology, wound dressing, bone repair, and myocardial tissue engineering. Additionally, this review provides a rational discussion on the current challenges and prospects of CD-based supramolecular hydrogels, which can provide ideas for the rapid development of CD-based hydrogels and foster their translation from the laboratory to clinical medicine.

Bioinspired Adhesive Antibacterial Hydrogel with Self-Healing and On-Demand Removability for Enhanced Full-Thickness Skin Wound Repair

Adhesive-caused injury is a great threat for extensive full-thickness skin trauma because extra-strong adhesion can incur unbearable pain and exacerbate trauma upon removal. Herein, inspired by the mussel, we designed and fabricated an adhesive antibacterial hydrogel dressing based on dynamic host-guest interaction that enabled on-demand stimuli-triggered removal to effectively care for wounds. In contrast with most hard-to-removable dressing, this adhesive antibacterial hydrogel exhibited strong adhesion property (85 kPa), which could achieve painless and noninvasive on-demand separation within 2 s through a host-guest competition mechanism (amantadine). At the same time, the hydrogel exhibited rapid self-healing properties, and the broken hydrogel could be completely repaired within 5 min. The hydrogel also had excellent protein adsorption properties, mechanical properties, antibacterial properties, and biocompatibility. This on-demand removal was facilitated by the introduction of amantadine as a competitive guest, without any significant adverse effects on cell activity (>90%) or wound healing (98.5%) in vitro. The full-thickness rat-skin defect model and histomorphological evaluation showed that the hydrogel could significantly promote wound healing and reduce scar formation by regulating inflammation, accelerating skin re-epithelialization, and promoting granulation tissue formation. These results indicate that the developed adhesive antibacterial hydrogel offers a promising therapeutic strategy for the healing of extensive full-layer skin injuries.

Cyclodextrin Inclusion Complexes for Improved Drug Bioavailability and Activity: Synthetic and Analytical Aspects

Many active pharmaceutical ingredients show low oral bioavailability due to factors such as poor solubility and physical and chemical instability. The formation of inclusion complexes with cyclodextrins, as well as cyclodextrin-based polymers, nanosponges, and nanofibers, is a valuable tool to improve the oral bioavailability of many drugs. The microencapsulation process modifies key properties of the included drugs including volatility, dissolution rate, bioavailability, and bioactivity. In this context, we present relevant examples of the stabilization of labile drugs through the encapsulation in cyclodextrins. The formation of inclusion complexes with drugs belonging to class IV in the biopharmaceutical classification system as an effective solution to increase their bioavailability is also discussed. The stabilization and improvement in nutraceuticals used as food supplements, which often have low intestinal absorption due to their poor solubility, is also considered. Cyclodextrin-based nanofibers, which are polymer-free and can be generated using environmentally friendly technologies, lead to dramatic bioavailability enhancements. The synthesis of chemically modified cyclodextrins, polymers, and nanosponges based on cyclodextrins is discussed. Analytical techniques that allow the characterization and verification of the formation of true inclusion complexes are also considered, taking into account the differences in the procedures for the formation of inclusion complexes in solution and in the solid state.

Green Synthesis of Magnetic Supramolecules β-Cyclodextrin/Iron Oxide Nanoparticles for Photocatalytic and Antibacterial Applications

Iron oxide nanoparticles (Fe3O4NPs) are a fascinating field of study due to their wide range of practical applications in environmental and medical contexts. This study presents a straightforward, environmentally friendly method for producing Fe3O4NPs utilizing β-cyclodextrin (β-CD) as a reducing and capping agent. This approach results in the rapid and effective eco-friendly synthesis of β-CD/Fe3O4NPs. The properties and characteristics of β-CD/Fe3O4NPs were investigated using various methods, including ultraviolet-visible (UV/vis) spectroscopy, Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), thermogravimetry analysis (TGA), and vibrating-sample magnetometry (VSM). The absorption of β-CD/Fe3O4NPs caused a distinct peak at 349 nm, as evidenced by the results of UV/vis studies. This peak was attributed to the absorption of surface plasmon resonance. The crystalline nature of β-CD/Fe3O4NPs was confirmed through XRD analysis. The SEM and TEM analyses have verified the geometry and structural characteristics of β-CD/Fe3O4NPs. The β-CD/Fe3O4NPs exhibited remarkable effectiveness in the decomposing efficiency (%) of methylene blue (MB) dye with 52.2, 94.1, and 100% for 0.2, 0.4, and 0.6 g β-CD/Fe3O4NPs, respectively. In addition, the highest efficiency in hunting radicals was observed (347.2 ± 8.2 mg/g) at 100 mg/mL β-CD/Fe3O4NPs; the combination of β-CD/Fe3O4NPs exhibited remarkable effectiveness in inhibiting the growth of some bacteria that cause infections. The capabilities of β-CD/Fe3O4NPs for various applications showed that these materials could be used in photocatalytic, antioxidants, and antibacterial. Additionally, the eco-friendly synthesis of these materials makes them a promising option for the remediation of harmful pollutants and microbes.

Electrochemical Wearable Biosensors and Bioelectronic Devices Based on Hydrogels: Mechanical Properties and Electrochemical Behavior

Hydrogel-based wearable electrochemical biosensors (HWEBs) are emerging biomedical devices that have recently received immense interest. The exceptional properties of HWEBs include excellent biocompatibility with hydrophilic nature, high porosity, tailorable permeability, the capability of reliable and accurate detection of disease biomarkers, suitable device-human interface, facile adjustability, and stimuli responsive to the nanofiller materials. Although the biomimetic three-dimensional hydrogels can immobilize bioreceptors, such as enzymes and aptamers, without any loss in their activities. However, most HWEBs suffer from low mechanical strength and electrical conductivity. Many studies have been performed on emerging electroactive nanofillers, including biomacromolecules, carbon-based materials, and inorganic and organic nanomaterials, to tackle these issues. Non-conductive hydrogels and even conductive hydrogels may be modified by nanofillers, as well as redox species. All these modifications have led to the design and development of efficient nanocomposites as electrochemical biosensors. In this review, both conductive-based and non-conductive-based hydrogels derived from natural and synthetic polymers are systematically reviewed. The main synthesis methods and characterization techniques are addressed. The mechanical properties and electrochemical behavior of HWEBs are discussed in detail. Finally, the prospects and potential applications of HWEBs in biosensing, healthcare monitoring, and clinical diagnostics are highlighted.

Chitosan Hydrogel-Delivered ABE8e Corrects PAX9 Mutant in Dental Pulp Stem Cells

Hypodontia (dental agenesis) is a genetic disorder, and it has been identified that the mutation C175T in PAX9 could lead to hypodontia. Cas9 nickase (nCas9)-mediated homology-directed repair (HDR) and base editing were used for the correction of this mutated point. This study aimed to investigate the effect of HDR and the base editor ABE8e in editing PAX9 mutant. It was found that the chitosan hydrogel was efficient in delivering naked DNA into dental pulp stem cells (DPSCs). To explore the influence of the C175T mutation in PAX9 on the proliferation of DPSCs, hydrogel was employed to deliver PAX9 mutant vector into DPSCs, finding that the PAX9-containing C175T mutation failed to promote the proliferation of DPSCs. Firstly, DPSCs stably carrying PAX9 mutant were constructed. Either an HDR or ABE8e system was delivered into the above-mentioned stable DPSCs, and then the correction efficiency using Sanger sequencing and Western blotting was determined. Meanwhile, the ABE8e presented significantly higher efficiency in correcting C175T compared with HDR. Furthermore, the corrected PAX9 presented enhanced viability and differentiation capacity for osteogenic and neurogenic lineages; the corrected PAX9 even possessed extremely enhanced transcriptional activation ability. In summary, this study has powerful implications for studies into base editors, chitosan hydrogel, and DPSCs in treating hypodontia.

Preparation of novel β-CD/P(AA-co-AM) hydrogels by frontal polymerization

In this paper, betaine (Bet) was used as a hydrogen bond acceptor (HBA), and acrylic acid (AA) and acrylamide (AM) were used as hydrogen bond donors (HBD) and mixed to form a deep eutectic solvent (DES). Different concentrations of β-cyclodextrin (β-CD) were dispersed in the DES, and a novel β-CD/P(AA-co-AM) hydrogel was prepared by frontal polymerization (FP). The characteristic structure and morphology of the hydrogels were analyzed using Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM), and the properties of the hydrogels were investigated. The results show that the mechanical properties of the hydrogel were improved by β-CD acting as a second cross-linking agent in the polymerization process, thus increasing the cross-link density of the hydrogel. Because the carboxyl groups contained in the acrylic acid dissociate under alkaline conditions, the composite hydrogel shows excellent pH responsiveness under alkaline conditions. Tetracycline hydrochloride was used as a drug model to test the drug loading and drug release performance of the hydrogels. With the increase of β-CD content, the loading capacity of the hydrogels for tetracycline hydrochloride gradually increased. The data of drug release indicated that the hydrogel has good drug delivery performance and has promising applications in drug delivery systems and other areas.