Enzymatic deconstruction of plant biomass by fungal enzymes

Biochemical characterization of a bilfunctional endoglucanase/glucomannanase derived from mountain soil

Metagenomics is increasingly recognized as a vital technique for exploring uncultured microorganisms, with one key application being the discovery of novel enzymes for industrial use. This study identified an endoglucanase gene from soil metagenome, termed ZFEG1801, which was expressed in E. coli BL21, purified, and characterized for its biochemical properties. The 72.8 kDa recombinant protein exhibited hydrolytic activity against sodium carboxymethyl cellulose (CMC) and konjac glucomannan (KG), with activities of 12.1 U/mg and 42.1 U/mg, respectively. The enzyme displayed optimal activity at pH 5 for CMC and pH 6 for KG, with broad pH stability ranging from 5 to 9. The optimal temperature was 40 °C, and it remained thermally stable between 20 and 40 °C, retaining over 60% of its activity. The enzyme activity remained stable in the presence of most metal ions; however, CMCase activity was inhibited by Cu2+, while glucomannanase activity was inhibited by Mn2+, Fe3+, and Ca2+. The catalytic efficiency towards both substrates was reduced by addition of SDS, DMSO, ethanol, isopropanol and acetonitrile. The Vmax and Km of the purified recombinant enzyme were 106.4 μmol/L/min and 4.9 mg/mL for CMC, and 833.3 μmol/L/min and 11.1 mg/mL for KG, respectively. The dual catalytic properties of ZFEG1801, broad pH stability and resistance to additives, demonstrate its potential for use in various biomass degradation processes.

Fungal lignocellulolytic enzymes: an in silico and full factorial design approach

Efficient degradation of lignocellulosic biomass is key for the production of value-added products, contributing to sustainable and renewable solutions. This study employs a two-step approach to evaluate lignocellulolytic enzymes of Ceratocystis paradoxa, Colletotrichum falcatum, and Sporisorium scitamineum. First, an in silico genomic analysis was conducted to predict the potential enzyme groups produced by these fungi. Second, a 2³ full factorial design of solid-state cultivation was employed to investigate the cultivation conditions that optimize enzyme activity. In silico analysis of phytopathogen genomes identified proteins with the potential for biomass degradation. Cellulase and phenoloxidase activities were assessed in culture medium and solid-state cultivation. A 2³ full factorial design was employed for solid-state cultivation to evaluate the cellulose, endoglucanase, and laccase activities. In silico analysis shows that C. falcatum has the most diverse enzyme set for lignocellulosic biomass degradation. In vitro assays corroborate this, demonstrating that C. falcatum produces the highest enzyme quantities, except for cellulase, where C. paradoxa outperforms it. Both C. paradoxa and C. falcatum exhibit cellulase and phenoloxidase activities, but only C. falcatum shows laccase activity. Most favorable enzyme production in solid-state cultivation occurred with 85-95 g 100 g- 1 bagasse moisture and 5 g 100 g- 1 yeast extract, with four-day cultivation period needed for cellulase and endoglucanase in C. paradoxa and 12 days for endoglucanase and laccase in C. falcatum. The in silico and in vitro assays demonstrated that C. falcatum can produce a diverse enzyme set, including laccase, cellulase, and endoglucanase, making it a promising candidate for enzymatic industrial applications.

Exploring the Synergistic Secretome: Insights from Co-Cultivation of Aspergillus brasiliensis and Trichoderma reesei RUT-C30

The spectrum of enzymes required for complete lignocellulosic waste hydrolysis is too diverse to be secreted by a single organism. An alternative is to employ fungal co-cultures to obtain more diverse and complete enzymatic cocktails without the need to mix enzymes during downstream processing. This study evaluated the co-cultivation of Aspergillus brasiliensis and Trichoderma reesei RUT-C30 in different conditions using sugarcane bagasse as the carbon source. The resulting enzymatic cocktails were characterized according to the impact of strain inoculation time on enzymatic activities and proteome composition. Data revealed that the profile of each enzymatic extract was highly dependent on the order in which the participating fungi were inoculated. Some of the co-cultures exhibited higher enzyme activities compared to their respective monocultures for enzymes such as CMCase, pectinase, β-glucosidase, and β-xylosidase. Analysis of the T. reesei RUT-C30 and A. brasiliensis co-culture secretome resulted in the identification of 167 proteins, with 78 from T. reesei and 89 from A. brasiliensis. In agreement with the enzymatic results, proteome analysis also revealed that the timing of inoculation greatly influences the overall secretome, with a predominance of T. reesei RUT-C30 proteins when first inoculated or in simultaneous inoculation.

An apparent lack of synergy between degradative enzymes against Staphylococcus aureus biofilms

Enzymes combat bacterial infections by degrading biomolecules to disperse Staphylococcus aureus biofilms. Commercial enzyme mixtures, like cellulase and pepsin, show concentration-dependent dispersion, but low concentrations lack synergy. Only the sequential addition of pepsin followed by Arthrobacter luteus zymolyase 20T displays synergy, effectively dispersing biofilms. Purified zymolyase 100T outperforms zymolyase 20T but lacks synergy with pepsin. This study underscores the complexity of enzymatic biofilm dispersal, highlighting the need for tailored approaches based on enzyme properties and biofilm composition.

Enzymatic degradation of cellulose in soil: A review

Cellulose degradation is a critical process in soil ecosystems, playing a vital role in nutrient cycling and organic matter decomposition. Enzymatic degradation of cellulosic biomass is the most sustainable and green method of producing liquid biofuel. It has gained intensive research interest with future perspective as the majority of terrestrial lignocellulose biomass has a great potential to be used as a source of bioenergy. However, the recalcitrant nature of lignocellulose limits its use as a source of energy. Noteworthy enough, enzymatic conversion of cellulose biomass could be a leading future technology. Fungal enzymes play a central role in cellulose degradation. Our understanding of fungal cellulases has substantially redirected in the past few years with the discovery of a new class of enzymes and Cellulosome. Efforts have been made from time to time to develop an economically viable method of cellulose degradation. This review provides insights into the current state of knowledge regarding cellulose degradation in soil and identifies areas where further research is needed.

Catalytic hydrolysis of agar using magnetic nanoparticles: optimization and characterization

BACKGROUND

Agar is used as a gelling agent that possesses a variety of biological properties; it consists of the polysaccharides agarose and porphyrin. In addition, the monomeric sugars generated after agar hydrolysis can be functionalized for use in biorefineries and biofuel production. The main objective of this study was to develop a sustainable agar hydrolysis process for bioethanol production using nanotechnology. Peroxidase-mimicking Fe3O4-MNPs were applied for agar degradation to generate agar hydrolysate-soluble fractions amenable to Saccharomyces cerevisiae and Escherichia coli during fermentation.

RESULTS

Fe3O4-MNP-treated (Fe3O4-MNPs, 1 g/L) agar exhibited 0.903 g/L of reducing sugar, which was 21-fold higher than that of the control (without Fe3O4-MNP-treated). Approximately 0.0181% and 0.0042% of ethanol from 1% of agar was achieved using Saccharomyces cerevisiae and Escherichia coli, respectively, after process optimization. Furthermore, different analytical techniques (FTIR, SEM, TEM, EDS, XRD, and TGA) were applied to validate the efficiency of Fe3O4-MNPs in agar degradation.

CONCLUSIONS

To the best of our knowledge, Fe3O4-MNP-treated agar degradation for bioethanol production through process optimization is a simpler, easier, and novel method for commercialization.

Cysteine facilitates the lignocellulolytic response of Trichoderma guizhouense NJAU4742 by indirectly up-regulating membrane sugar transporters

BACKGROUND

Filamentous fungi possess a rich CAZymes system, which is widely studied and applied in the bio-conversion of plant biomass to alcohol chemicals. Carbon source acquisition is the fundamental driver for CAZymes-producing sustainability and secondary metabolism, therefore, a deeper insight into the regulatory network of sugar transport in filamentous fungi has become urgent.

RESULTS

This study reports an important linkage of sulfur assimilation to lignocellulose response of filamentous fungus. Inorganic sulfur addition facilitated biodegradation of rice straw by Trichoderma guizhouense NJAU4742. Cysteine and glutathione were revealed as major intracellular metabolites responsive to sulfur addition by metabolomics, cysteine content was increased in this process and glutathione increased correspondingly. Two membrane sugar transporter genes, Tgmst1 and Tgmst2, were identified as the critical response genes significantly up-regulated when intracellular cysteine increased. Tgmst1 and Tgmst2 were both positively regulated by the glucose regulation-related protein (GRP), up-regulation of both Tgmst1 and Tggrp can cause a significant increase in intracellular glucose. The transcriptional regulatory function of GRP mainly relied on GSH-induced glutathionylation, and the transcription activating efficiency was positively related to the glutathionylation level, furthermore, DTT-induced deglutathionylation resulted in the down-regulation of downstream genes.

CONCLUSIONS

Inorganic sulfur addition induces a rise in intracellular Cys content, and the conversion of cysteine to glutathione caused the increase of glutathionylation level of GRP, which in turn up-regulated Tgmst1 and Tgmst2. Subsequently, the sugar transport efficiency of single cells was improved, which facilitated the maintenance of vigorous CAZymes metabolism and the straw-to-biomass conversion.

An apparent lack of synergy between degradative enzymes against Staphylococcus aureus biofilms

The use of enzymes represents an approach to combat bacterial infections by degrading extracellular biomolecules to disperse Staphylococcus aureus biofilms. Commercial enzyme preparations, including cellulase, amylase, pectinase, zymolyase, and pepsin, exhibit concentration-dependent dispersion of S. aureus biofilms. Here, we report that low concentrations of these enzymes generally lack synergy when combined or added together sequentially to biofilms. Only the addition of a protease (pepsin) followed by a commercial mixture of degradative enzymes from Arthrobacter luteus (zymolyase 20T), demonstrated synergy and was effective at dispersing S. aureus biofilms. A more purified mixture of Arthrobacter luteus enzymes (zymolyase 100T) showed improved dispersal of S. aureus biofilms compared to zymolyase 20T but lacked synergy with pepsin. This study emphasizes the complexity of enzymatic biofilm dispersal and the need for tailored approaches based on the properties of degradative enzymes and biofilm composition.

Differential carbohydrate-active enzymes and secondary metabolite production by the grapevine trunk pathogen Neofusicoccum parvum Bt-67 grown on host and non-host biomass

Neofusicoccum parvum is one of the most aggressive Botryosphaeriaceae species associated with grapevine trunk diseases. This species may secrete enzymes capable of overcoming the plant barriers, leading to wood colonization. In addition to their roles in pathogenicity, there is an interest in taking advantage of N. parvum carbohydrate-active enzymes (CAZymes), related to plant cell wall degradation, for lignocellulose biorefining. Furthermore, N. parvum produces toxic secondary metabolites that may contribute to its virulence. In order to increase knowledge on the mechanisms underlying pathogenicity and virulence, as well as the exploration of its metabolism and CAZymes for lignocellulose biorefining, we evaluated the N. parvum strain Bt-67 capacity in producing lignocellulolytic enzymes and secondary metabolites when grown in vitro with two lignocellulosic biomasses: grapevine canes (GP) and wheat straw (WS). For this purpose, a multiphasic study combining enzymology, transcriptomic, and metabolomic analyses was performed. Enzyme assays showed higher xylanase, xylosidase, arabinofuranosidase, and glucosidase activities when the fungus was grown with WS. Fourier transform infrared (FTIR) spectroscopy confirmed the lignocellulosic biomass degradation caused by the secreted enzymes. Transcriptomics indicated that the N. parvum Bt-67 gene expression profiles in the presence of both biomasses were similar. In total, 134 genes coding CAZymes were up-regulated, where 94 of them were expressed in both biomass growth conditions. Lytic polysaccharide monooxygenases (LPMOs), glucosidases, and endoglucanases were the most represented CAZymes and correlated with the enzymatic activities obtained. The secondary metabolite production, analyzed by high-performance liquid chromatography-ultraviolet/visible spectophotometry-mass spectrometry (HPLC-UV/Vis-MS), was variable depending on the carbon source. The diversity of differentially produced metabolites was higher when N. parvum Bt-67 was grown with GP. Overall, these results provide insight into the influence of lignocellulosic biomass on virulence factor expressions. Moreover, this study opens the possibility of optimizing the enzyme production from N. parvum with potential use for lignocellulose biorefining.

Development of the thermophilic fungus Myceliophthora thermophila into glucoamylase hyperproduction system via the metabolic engineering using improved AsCas12a variants

BACKGROUND

Glucoamylase is an important enzyme for starch saccharification in the food and biofuel industries and mainly produced from mesophilic fungi such as Aspergillus and Rhizopus species. Enzymes produced from thermophilic fungi can save the fermentation energy and reduce costs as compared to the fermentation system using mesophiles. Thermophilic fungus Myceliophthora thermophila is industrially deployed fungus to produce enzymes and biobased chemicals from biomass during optimal growth at 45 °C. This study aimed to construct the M. thermophila platform for glucoamylase hyper-production by broadening genomic targeting range of the AsCas12a variants, identifying key candidate genes and strain engineering.

RESULTS

In this study, to increase the genome targeting range, we upgraded the CRISPR-Cas12a-mediated technique by engineering two AsCas12a variants carrying the mutations S542R/K607R and S542R/K548V/N552R. Using the engineered AsCas12a variants, we deleted identified key factors involved in the glucoamylase expression and secretion in M. thermophila, including Mtstk-12, Mtap3m, Mtdsc-1 and Mtsah-2. Deletion of four targets led to more than 1.87- and 1.85-fold higher levels of secretion and glucoamylases activity compared to wild-type strain MtWT. Transcript level of the major amylolytic genes showed significantly increased in deletion mutants. The glucoamylase hyper-production strain MtGM12 was generated from our previously strain MtYM6 via genetically engineering these targets Mtstk-12, Mtap3m, Mtdsc-1 and Mtsah-2 and overexpressing Mtamy1 and Mtpga3. Total secreted protein and activities of amylolytic enzymes in the MtGM12 were about 35.6-fold and 51.9‒55.5-fold higher than in MtWT. Transcriptional profiling analyses revealed that the amylolytic gene expression levels were significantly up-regulated in the MtGM12 than in MtWT. More interestingly, the MtGM12 showed predominantly short and highly bulging hyphae with proliferation of rough ER and abundant mitochondria, secretion vesicles and vacuoles when culturing on starch.

CONCLUSIONS

Our results showed that these AsCas12a variants worked well for gene deletions in M. thermophila. We successfully constructed the glucoamylase hyper-production strain of M. thermophila by the rational redesigning and engineering the transcriptional regulatory and secretion pathway. This targeted engineering strategy will be very helpful to improve industrial fungal strains and promote the morphology engineering for enhanced enzyme production.

Structural Characteristics-Reactivity Relationships for Catalytic Depolymerization of Lignin into Aromatic Compounds: A Review

Developing renewable biomass resources is an urgent task to reduce climate change. Lignin, the only renewable aromatic feedstock present in nature, has attracted considerable global interest in its transformation and utilization. However, the complexity of lignin's structure, uncertain linkages, stability of side chain connection, and inevitable recondensation of reaction fragments make lignin depolymerization into biofuels or platform chemicals a daunting challenge. Therefore, understanding the structural characteristics and reactivity relationships is crucial for achieving high-value utilization of lignin. In this review, we summarize the key achievements in the field of lignin conversion with a focus on the effects of the β-O-4 content, S/G ratio, lignin sources, and an "ideal" lignin-catechyl lignin. We discuss how these characteristics influence the formation of lignin monomer products and provide an outlook on the future direction of lignin depolymerization.

Exploring the multi-level regulation of lignocellulases in the filamentous fungus Trichoderma guizhouense NJAU4742 from an omics perspective

BACKGROUND

Filamentous fungi are highly efficient at deconstructing plant biomass by secreting a variety of enzymes, but the complex enzymatic regulation underlying this process is not conserved and remains unclear.

RESULTS

In this study, cellulases and xylanases could specifically respond to Avicel- and xylan-induction, respectively, in lignocellulose-degrading strain Trichoderma guizhouense NJAU4742, however, the differentially regulated cellulases and xylanases were both under the absolute control of the same TgXyr1-mediated pathway. Further analysis showed that Avicel could specifically induce cellulase expression, which supported the existence of an unknown specific regulator of cellulases in strain NJAU4742. The xylanase secretion is very complex, GH10 endoxylanases could only be induced by Avicel, while, other major xylanases were significantly induced by both Avicel and xylan. For GH10 xylanases, an unknown specific regulator was also deduced to exist. Meanwhile, the post-transcriptional inhibition was subsequently suggested to stop the Avicel-induced xylanases secretion, which explained the specifically high xylanase activities when induced by xylan in strain NJAU4742. Additionally, an economical strategy used by strain NJAU4742 was proposed to sense the environmental lignocellulose under the carbon starvation condition, that only slightly activating 4 lignocellulose-degrading genes before largely secreting all 33 TgXyr1-controlled lignocellulases if confirming the existence of lignocellulose components.

CONCLUSIONS

This study, aiming to explore the unknown mechanisms of plant biomass-degrading enzymes regulation through the combined omics analysis, will open directions for in-depth understanding the complex carbon utilization in filamentous fungi.

Heterologous expression and characterization of a novel lytic polysaccharide monooxygenase from Natrialbaceae archaeon and its application for chitin biodegradation

Lytic polysaccharide monooxygenases could enhance the enzymatic conversion of recalcitrant polysaccharides by glycoside hydrolases. This study reports the expression and identification of a novel AA10 LPMO from Natrialbaceae archaeon, named NaLPMO10A, as a C1 oxidizer of chitin. The optimal temperature and pH for NaLPMO10A activity were 40 °C and 9.0, respectively, and NaLPMO10A exhibited high thermostability and pH stability under alkaline conditions. NaLPMO10A was also highly tolerant and stable when treated with high concentration of metal ions (1 M). Moreover, metal ions (Na⁺, K⁺, Ca²⁺ and Mg²⁺) significantly promoted NaLPMO10A activity and improved the saccharification efficiency of chitin by 22.6%, 45.9%, 36.7% and 53.9%, respectively, compared to commercial chitinase alone. Together, the findings of this study fill a gap in archaeal LPMO research, and for the first time demonstrate that archaeal NaLPMO10A could be a promising enzyme for improving saccharification under extreme condition, with potential applications in biorefineries.

From lignocellulose to plastics: Knowledge transfer on the degradation approaches by fungi

In this review, we argue that there is much to be learned by transferring knowledge from research on lignocellulose degradation to that on plastic. Plastic waste accumulates in the environment to hazardous levels, because it is inherently recalcitrant to biological degradation. Plants evolved lignocellulose to be resistant to degradation, but with time, fungi became capable of utilising it for their nutrition. Examples of how fungal strategies to degrade lignocellulose could be insightful for plastic degradation include how fungi overcome the hydrophobicity of lignin (e.g. production of hydrophobins) and crystallinity of cellulose (e.g. oxidative approaches). In parallel, knowledge of the methods for understanding lignocellulose degradation could be insightful such as advanced microscopy, genomic and post-genomic approaches (e.g. gene expression analysis). The known limitations of biological lignocellulose degradation, such as the necessity for physiochemical pretreatments for biofuel production, can be predictive of potential restrictions of biological plastic degradation. Taking lessons from lignocellulose degradation for plastic degradation is also important for biosafety as engineered plastic-degrading fungi could also have increased plant biomass degrading capabilities. Even though plastics are significantly different from lignocellulose because they lack hydrolysable C-C or C-O bonds and therefore have higher recalcitrance, there are apparent similarities, e.g. both types of compounds are mixtures of hydrophobic polymers with amorphous and crystalline regions, and both require hydrolases and oxidoreductases for their degradation. Thus, many lessons could be learned from fungal lignocellulose degradation.

Carbohydrate-binding modules targeting branched polysaccharides: overcoming side-chain recalcitrance in a non-catalytic approach

Extensive decoration of backbones is a major factor resulting in resistance of enzymatic conversion in hemicellulose and other branched polysaccharides. Employing debranching enzymes is the main strategy to overcome this kind of recalcitrance at present. A carbohydrate-binding module (CBM) is a contiguous amino acid sequence that can promote the binding of enzymes to various carbohydrates, thereby facilitating enzymatic hydrolysis. According to previous studies, CBMs can be classified into four types based on their preference in ligand type, where Type III and IV CBMs prefer to branched polysaccharides than the linear and thus are able to specifically enhance the hydrolysis of substrates containing side chains. With a role in dominating the hydrolysis of branched substrates, Type III and IV CBMs could represent a non-catalytic approach in overcoming side-chain recalcitrance.

Four cellulose-active lytic polysaccharide monooxygenases from Cellulomonas species

BACKGROUND

The discovery of lytic polysaccharide monooxygenases (LPMOs) has fundamentally changed our understanding of microbial lignocellulose degradation. Cellulomonas bacteria have a rich history of study due to their ability to degrade recalcitrant cellulose, yet little is known about the predicted LPMOs that they encode from Auxiliary Activity Family 10 (AA10).

RESULTS

Here, we present the comprehensive biochemical characterization of three AA10 LPMOs from Cellulomonas flavigena (CflaLPMO10A, CflaLPMO10B, and CflaLPMO10C) and one LPMO from Cellulomonas fimi (CfiLPMO10). We demonstrate that these four enzymes oxidize insoluble cellulose with C1 regioselectivity and show a preference for substrates with high surface area. In addition, CflaLPMO10B, CflaLPMO10C, and CfiLPMO10 exhibit limited capacity to perform mixed C1/C4 regioselective oxidative cleavage. Thermostability analysis indicates that these LPMOs can refold spontaneously following denaturation dependent on the presence of copper coordination. Scanning and transmission electron microscopy revealed substrate-specific surface and structural morphological changes following LPMO action on Avicel and phosphoric acid-swollen cellulose (PASC). Further, we demonstrate that the LPMOs encoded by Cellulomonas flavigena exhibit synergy in cellulose degradation, which is due in part to decreased autoinactivation.

CONCLUSIONS

Together, these results advance understanding of the cellulose utilization machinery of historically important Cellulomonas species beyond hydrolytic enzymes to include lytic cleavage. This work also contributes to the broader mapping of enzyme activity in Auxiliary Activity Family 10 and provides new biocatalysts for potential applications in biomass modification.

Genetic Transformation of Trichoderma spp

The production of biofuels from plant biomass is dependent on the availability of enzymes that can hydrolyze the plant cell wall polysaccharides to their monosaccharides. These enzyme mixtures are formed by microorganisms but their native compositions and properties are often not ideal for application. Genetic engineering of these microorganisms is therefore necessary, in which introduction of DNA is an essential precondition. The filamentous fungus Trichoderma reesei-the main producer of plant-cell-wall-degrading enzymes for biofuels and other industries-has been subjected to intensive genetic engineering toward this goal and has become one of the iconic examples of the successful genetic improvement of fungi. However, the genetic manipulation of other enzyme-producing Trichoderma species is frequently less efficient and, therefore, rarely managed. In this chapter, we therefore describe the two potent methods of Trichoderma transformation mediated by either (a) polyethylene glycol (PEG) or (b) Agrobacterium. The methods are optimized for T. reesei but can also be applied for such transformation-resilient species as T. harzianum and T. guizhouense, which are putative upcoming alternatives for T. reesei in this field. The protocols are simple, do not require extensive training or special equipment, and can be further adjusted for T. reesei mutants with particular properties.

Involvement of PaSNF1 in Fungal Development, Sterigmatocystin Biosynthesis, and Lignocellulosic Degradation in the Filamentous Fungus Podospora anserina

The sucrose non-fermenting 1/AMP-activated protein kinase (SNF1/AMPK) is a central regulator of carbon metabolism and energy production in the eukaryotes. In this study, the functions of the Podospora anserina SNF1 (PaSNF1) ortholog were investigated. The ΔPaSNF1 mutant displays a delayed development of mycelium and fruiting bodies and fails to form ascospores. The expression of the PaSNF1 gene in the strain providing female organs in a cross is sufficient to ensure fertility, indicating a maternal effect. Results of environmental stress showed that ΔPaSNF1 was hypersensitive to stress, such as osmotic pressure and heat shock, and resistant to fluconazole. Interestingly, the knockout of PaSNF1 significantly promoted sterigmatocystin (ST) synthesis but suppressed cellulase [filter paperase (FPA), endoglucanase (EG), and β-glucosidase (BG)] activity. Further, transcriptome analysis indicated that PaSNF1 made positive regulatory effects on the expression of genes encoding cellulolytic enzymes. These results suggested that PaSNF1 may function in balancing the operation of primary and secondary metabolism. This study suggested that SNF1 was a key regulator concerting vegetative growth, sexual development, and stress tolerance. Our study provided the first genetic evidence that SNF1 was involved in the ST biosynthesis and that it may also be a major actor of lignocellulose degradation in P. anserina.

Improvement of the catalytic activity and thermostability of a hyperthermostable endoglucanase by optimizing N-glycosylation sites

BACKGROUND

Endoglucanase has been extensively employed in industrial processes as a key biocatalyst for lignocellulosic biomass degradation. Thermostable endoglucanases with high catalytic activity at elevated temperatures are preferred in industrial use. To improve the activity and thermostability, site-directed mutagenesis was conducted to modify the N-glycosylation sites of the thermostable β-1,4-endoglucanase CTendo45 from Chaetomium thermophilum.

RESULTS

In this study, structure-based rational design was performed based on the modification of N-glycosylation sites in CTendo45. Eight single mutants and one double mutant were constructed and successfully expressed in Pichia pastoris. When the unique N-glycosylation site of N88 was eliminated, a T90A variant was active, and its specific activity towards CMC-Na and β-d-glucan was increased 1.85- and 1.64-fold, respectively. The mutant R67S with an additional N-glycosylation site of N65 showed a distinct enhancement in catalytic efficiency. Moreover, T90A and R67S were endowed with extraordinary heat endurance after 200 min of incubation at different temperatures ranging from 30 to 90 °C. Likewise, the half-lives (t _1/2) indicated that T90A and R67S exhibited improved enzyme thermostability at 80 °C and 90 °C. Notably, the double-mutant T90A/R67S possessed better hydrolysis activity and thermal stability than its single-mutant counterparts and the wild type.

CONCLUSIONS

This study provides initial insight into the biochemical function of N-glycosylation in thermostable endoglucanases. Moreover, the design approach to the optimization of N-glycosylation sites presents an effective and feasible strategy to improve enzymatic activity and thermostability.

Genomic and Postgenomic Diversity of Fungal Plant Biomass Degradation Approaches

Plant biomass degradation by fungi is a widely studied and applied field of science, due to its relevance for the global carbon cycle and many biotechnological applications. Before the genome era, many of the in-depth studies focused on a relatively small number of species, whereas now, many species can be addressed in detail, revealing the large variety in the approach used by fungi to degrade plant biomass. This variation is found at many levels and includes genomic adaptation to the preferred biomass component, but also different approaches to degrade this component by diverse sets of activities encoded in the genome. Even larger differences have been observed using transcriptome and proteome studies, even between closely related species, suggesting a high level of adaptation in individual species. A better understanding of the drivers of this diversity could be highly valuable in developing more efficient biotechnology approaches for the enzymatic conversion of plant biomass.

Proteomic analysis reflects an environmental alkalinization-coupled pH-dependent mechanism of regulating lignocellulases in Trichoderma guizhouense NJAU4742

BACKGROUND

Filamentous fungi have the ability to efficiently decompose plant biomass, and thus are widely used in the biofuel and bioprocess industries. In process, ambient pH has been reported to strongly affect the performance of the applied functional filamentous fungi. In this study, Trichoderma guizhouense NJAU4742 was investigated under the fermentation of rice straw at different initial pH values for a detailed study.

RESULTS

The results showed that NJAU4742 strain could tolerate ambient pH values ranging from 3.0 to 9.0, but had significantly higher growth speed and extracellular enzyme activities under acidic conditions. At low ambient pH (< 4), NJAU4742 strain achieved rapid degradation of rice straw by elevating the ambient pH to an optimal range through environmental alkalinization. Further proteomic analysis identified a total of 1139 intracellular and extracellular proteins during the solid-state fermentation processes, including the quantified 190 carbohydrate-active enzymes (CAZymes) responsible for rice straw degradation, such as 19 cellulases, 47 hemicellulases and 11 chitinases. Meanwhile, the analysis results clearly showed that the secreted lignocellulases had a synergistic trend in distribution according to the ambient pH, and thus led to a pH-dependent classification of lignocellulases in T. guizhouense NJAU4742.

CONCLUSIONS

Most functional lignocellulases were found to be differently regulated by the ambient pH in T. guizhouense NJAU4742, which had the ability of speeding up biomass degradation by elevating the ambient pH through environmental alkalinization. These findings contribute to the theoretical basis for the biodegradation of plant biomass by filamentous fungi in the biofuel and bioprocess industries.

Towards Controlling the Reactivity of Enzymes in Mechanochemistry: Inert Surfaces Protect β-Glucosidase Activity During Ball Milling

The activity of β-glucosidases-the enzymes responsible for the final step in the enzymatic conversion of cellulose to glucose-can be maintained and manipulated under mechanochemical conditions in the absence of bulk solvent, either through an unexpected stabilization effect of inert surfaces, or by altering the enzymatic equilibrium. The reported results illustrate unique aspects of mechanoenzymatic reactions that are not observable in conventional aqueous solutions. They also represent the first reported strategies to enhance activity and favor either direction of the reaction under mechanochemical conditions.

Upgrading of efficient and scalable CRISPR-Cas-mediated technology for genetic engineering in thermophilic fungus Myceliophthora thermophila

BACKGROUND

Thermophilic filamentous fungus Myceliophthora thermophila has great capacity for biomass degradation and is an attractive system for direct production of enzymes and chemicals from plant biomass. Its industrial importance inspired us to develop genome editing tools to speed up the genetic engineering of this fungus. First-generation CRISPR-Cas9 technology was developed in 2017 and, since then, some progress has been made in thermophilic fungi genetic engineering, but a number of limitations remain. They include the need for complex independent expression cassettes for targeting multiplex genomic loci and the limited number of available selectable marker genes.

RESULTS

In this study, we developed an Acidaminococcus sp. Cas12a-based CRISPR system for efficient multiplex genome editing, using a single-array approach in M. thermophila. These CRISPR-Cas12a cassettes worked well for simultaneous multiple gene deletions/insertions. We also developed a new simple approach for marker recycling that relied on the novel cleavage activity of the CRISPR-Cas12a system to make DNA breaks in selected markers. We demonstrated its performance by targeting nine genes involved in the cellulase production pathway in M. thermophila via three transformation rounds, using two selectable markers neo and bar. We obtained the nonuple mutant M9 in which protein productivity and lignocellulase activity were 9.0- and 18.5-fold higher than in the wild type. We conducted a parallel investigation using our transient CRISPR-Cas9 system and found the two technologies were complementary. Together we called them CRISPR-Cas-assisted marker recycling technology (Camr technology).

CONCLUSIONS

Our study described new approaches (Camr technology) that allow easy and efficient marker recycling and iterative stacking of traits in the same thermophilic fungus strain either, using the newly established CRISPR-Cas12a system or the established CRISPR-Cas9 system. This Camr technology will be a versatile and efficient tool for engineering, theoretically, an unlimited number of genes in fungi. We expect this advance to accelerate biotechnology-oriented engineering processes in fungi.

Superior cellulolytic activity of Trichoderma guizhouense on raw wheat straw

Lignocellulosic plant biomass is the world's most abundant carbon source and has consequently attracted attention as a renewable resource for production of biofuels and commodity chemicals that could replace fossil resources. Due to its recalcitrant nature, it must be pretreated by chemical, physical or biological means prior to hydrolysis, introducing additional costs. In this paper, we tested the hypothesis that fungi which thrive on lignocellulosic material (straw, bark or soil) would be efficient in degrading untreated lignocellulose. Wheat straw was used as a model. We developed a fast and simple screening method for cellulase producers and tested one hundred Trichoderma strains isolated from wheat straw. The most potent strain-UB483FTG2/ TUCIM 4455, was isolated from substrate used for mushroom cultivation and was identified as T. guizhouense. After optimization of growth medium, high cellulase activity was already achieved after 72 h of fermentation on raw wheat straw, while the model cellulase overproducing strain T. reesei QM 9414 took 170 h and reached only 45% of the cellulase activity secreted by T. guizhouense. Maximum production levels were 1.1 U/mL (measured with CMC as cellulase substrate) and 0.7 U/mL (β-glucosidase assay). The T. guizhouense cellulase cocktail hydrolyzed raw wheat straw within 35 h. Our study shows that screening for fungi that successfully compete for special substrates in nature will lead to the isolation of strains with qualitatively and quantitatively superior enzymes needed for their digestion which could be used for industrial purposes.

Effects of exogenous protein-like precursors on humification process during lignocellulose-like biomass composting: Amino acids as the key linker to promote humification process

The aim of this study is to assess the effectiveness of protein-like precursors addition on promoting humification process during lignocellulose-like biomass composting through adding amino acids to compost. The humification indexes of R1 and R2 was significantly higher than that of CK (P < 0.05). The decreasing ratio of Maillard precursor concentration of R2 and R1 was higher than CK. Amino acids addition affected the bacteria community and environmental factors during composting. Variance partitioning analysis showed that humification process was strengthened with environmental factors, bacteria community, Maillard precursors. Structural equation model (SEM) analysis showed that amino acids had substantial impact on promoting humic acid (HA) formation. The combined application of protein-like wastes and lignocellulose-like wastes was suggested to improve carbon sequestration. This study lays a foundation for economically and effectively managing different types of straws by composting.

Combined in situ Physical and ex-situ Biochemical Approaches to Investigate in vitro Deconstruction of Destarched Wheat Bran by Enzymes Cocktail Used in Animal Nutrition

Wheat bran is a foodstuff containing more than 40% of non-starch polysaccharides (NSPs) that are hardly digestible by monogastric animals. Therefore, cocktails enriched of hydrolytic enzymes (termed NSPases) are commonly provided as feed additives in animal nutrition. However, how these enzymes cocktails contribute to NSPs deconstruction remains largely unknown. This question was addressed by employing an original methodology that makes use of a multi-instrumented bioreactor that allows to dynamically monitor enzymes in action and to extract in-situ physical and ex-situ biochemical data from this monitoring. We report here that the deconstruction of destarched wheat bran by an industrial enzymes cocktail termed Rovabio® was entailed by two concurrent events: a particles fragmentation that caused in <2 h a 70% drop of the suspension viscosity and a solubilization that released <30 % of the wheat bran NSPs. Upon longer exposure, the fragmentation of particles continued at a very slow rate without any further solubilization. Contrary to this cocktail, xylanase C alone caused a moderate 25% drop of viscosity and a very weak fragmentation. However, the amount of xylose and arabinose from solubilized sugars after 6 h treatment with this enzyme was similar to that obtained after 2 h with Rovabio®. Altogether, this multi-scale analysis supported the synergistic action of enzymes mixture to readily solubilize complex polysaccharides, and revealed that in spite of the richness and diversity of hydrolytic enzymes in the cocktail, the deconstruction of NSPs in wheat bran was largely incomplete.

A Lytic Polysaccharide Monooxygenase from a White-Rot Fungus Drives the Degradation of Lignin by a Versatile Peroxidase

Lytic polysaccharide monooxygenases (LPMOs), a class of copper-dependent enzymes, play a crucial role in boosting the enzymatic decomposition of polysaccharides. Here, we reveal that LPMOs might be associated with a lignin degradation pathway. An LPMO from white-rot fungus Pleurotus ostreatus, LPMO9A (PoLPMO9A), was shown to be able to efficiently drive the activity of class II lignin-degrading peroxidases in vitro through H₂O₂ production regardless of the presence or absence of a cellulose substrate. An LPMO-driven peroxidase reaction can degrade β-O-4 and 5-5' types of lignin dimer with 46.5% and 37.7% degradation, respectively, as well as alter the structure of natural lignin and kraft lignin. H₂O₂ generated by PoLPMO9A was preferentially utilized for the peroxidase from Physisporinus sp. strain P18 (PsVP) reaction rather than cellulose oxidation, indicating that white-rot fungi may have a strategy for preferential degradation of resistant lignin. This discovery shows that LPMOs may be involved in lignin oxidation as auxiliary enzymes of lignin-degrading peroxidases during the white-rot fungal decay process.IMPORTANCE The enzymatic biodegradation of structural polysaccharides is affected by the degree of delignification of lignocellulose during the white-rot fungal decay process. The lignin matrix decreases accessibility to the substrates for LPMOs. H₂O₂ has been studied as a cosubstrate for LPMOs, but the formation and utilization of H₂O₂ in the reactions still represent an intriguing focus of current research. Lignin-degrading peroxidases and LPMOs usually coexist during fungal decay, and therefore, the relationship between H₂O₂-dependent lignin-degrading peroxidases and LPMOs should be considered during the wood decay process. The current study revealed that white-rot fungal LPMOs may be involved in the degradation of lignin through driving a versatile form of peroxidase activity in vitro and that H₂O₂ generated by PoLPMO9A was preferentially used for lignin oxidation by lignin-degrading peroxidase (PsVP). These findings reveal a potential relationship between LPMOs and lignin degradation, which will be of great significance for further understanding the contribution of LPMOs to the white-rot fungal decay process.

Automated Glycan Assembly of Plant Oligosaccharides and Their Application in Cell-Wall Biology

The plant cell wall provides the richest available resource of fermentable carbohydrates and biobased materials. The main component of plant cell walls is cellulose, which is the most abundant biomolecule on earth. Apart from cellulose, which is constructed from relatively simple β-1,4-glucan chains, plant cell walls also contain structurally more complex heteropolysaccharides (hemicellulose and pectin), as well as lignin and cell-wall proteins. A detailed understanding of the molecular structures, functions, and biosyntheses of cell-wall components is required to further promote their industrial use. Plant cell-wall research is, to a large degree, hampered by a lsack of available well-defined oligosaccharide samples that represent the structural features of cell-wall glycans. One technique to access these oligosaccharides is automated glycan assembly; a technique in which monosaccharide building blocks are, similarly to automated peptide and oligonucleotide chemistry, successively added to a linker-functionalized resin in a fully automated manner. Herein, recent research into the automated glycan assembly of different classes of cell-wall glycans used as molecular tools for cell-wall biology is discussed. More than 60 synthetic oligosaccharides were prepared and printed as microarrays for screening monoclonal antibodies that recognize plant cell-wall polysaccharides. The synthesized oligosaccharides have also been used to investigate glycosyltransferases and glycoside hydrolases, which are involved in synthesis and degradation of plant cell walls, as well as for the analysis of cell-wall-remodeling enzymes.

N,N-dimethylformamide induces cellulase production in the filamentous fungus Trichoderma reesei

BACKGROUND

The filamentous fungus Trichoderma reesei produces cellulase enzymes that are widely studied for lignocellulose bioconversion to biofuel. N,N-dimethylformamide (DMF) is a versatile organic solvent used in large quantities in industries.

RESULTS

In this study, we serendipitously found that biologically relevant concentrations of extracellular DMF-induced cellulase production in the T. reesei hyper-cellulolytic mutant Rut-C30 and wild-type strain QM6a. Next, by transcriptome analysis, we determined that plc-e encoding phospholipase C was activated by DMF and revealed that cytosolic Ca²⁺ plays a vital role in the response of T. reesei to DMF. Using EGTA (a putative extracellular Ca²⁺ chelator) and LaCl₃ (a plasma membrane Ca²⁺ channel blocker), we demonstrated that DMF induced a cytosolic Ca²⁺ burst via extracellular Ca²⁺ and Ca²⁺ channels in T. reesei, and that the cytosolic Ca²⁺ burst induced by DMF-mediated overexpression of cellulase through calcium signaling. Deletion of crz1 confirmed that calcium signaling plays a dominant role in DMF-induced cellulase production. Additionally, 0.5-2% DMF increases the permeability of T. reesei mycelia for cellulase release. Simultaneous supplementation with 1% DMF and 10 mM Mn²⁺ to T. reesei Rut-C30 increased cellulase activity approximately fourfold compared to that without treatment and was also more than that observed in response to either treatment alone.

CONCLUSIONS

Our results reveal that DMF-induced cellulase production via calcium signaling and permeabilization. Our results also provide insight into the role of calcium signaling in enzyme production for enhanced cellulase production and the development of novel inducers of cellulase.

Second Generation Bioethanol Production: On the Use of Pulp and Paper Industry Wastes as Feedstock

Due to the health and environment impacts of fossil fuels utilization, biofuels have been investigated as a potential alternative renewable source of energy. Bioethanol is currently the most produced biofuel, mainly of first generation, resulting in food-fuel competition. Second generation bioethanol is produced from lignocellulosic biomass, but a costly and difficult pretreatment is required. The pulp and paper industry has the biggest income of biomass for non-food-chain production, and, simultaneously generates a high amount of residues. According to the circular economy model, these residues, rich in monosaccharides, or even in polysaccharides besides lignin, can be utilized as a proper feedstock for second generation bioethanol production. Biorefineries can be integrated in the existing pulp and paper industrial plants by exploiting the high level of technology and also the infrastructures and logistics that are required to fractionate and handle woody biomass. This would contribute to the diversification of products and the increase of profitability of pulp and paper industry with additional environmental benefits. This work reviews the literature supporting the feasibility of producing ethanol from Kraft pulp, spent sulfite liquor, and pulp and paper sludge, presenting and discussing the practical attempt of biorefineries implementation in pulp and paper mills for bioethanol production.

Proteomic researches for lignocellulose-degrading enzymes: A mini-review

Protective action of lignin/hemicellulose networks and crystalline structures of embedded cellulose render lignocellulose material resistant to external enzymatic attack. To eliminate this bottleneck, research has been conducted in which advanced proteomic techniques are applied to identify effective commercial hydrolytic enzymes. This mini-review summarizes researches on lignocellulose-degrading enzymes, the mechanisms of the responses of various lignocellulose-degrading strains and microbial communities to various carbon sources and various biomass substrates, post-translational modifications of lignocellulose-degrading enzymes, new lignocellulose-degrading strains, new lignocellulose-degrading enzymes and a new method of secretome analysis. The challenges in the practical use of enzymatic hydrolysis process to realize lignocellulose biorefineries are discussed, along with the prospects for the same.

Effect of CBM1 and linker region on enzymatic properties of a novel thermostable dimeric GH10 xylanase (Xyn10A) from filamentous fungus Aspergillus fumigatus Z5

Xylanase with a high thermostability will satisfy the needs of raising the temperature of hydrolysis to improve the rheology of the broth in industry of biomass conversion. In this study, a xylanase gene (xyn10A), predicted to encode a hydrolase domain of GH10, a linker region and a CBM1 domain, was cloned from a superior lignocellulose degrading strain Aspergillus fumigatus Z5 and successfully expressed in Pichia pastoris X33. Xyn10A has a specific xylanase activity of 34.4 U mg⁻¹, and is optimally active at 90 °C and pH 6.0. Xyn10A shows quite stable at pHs ranging from 3.0 to 11.0, and keeps over 40% of xylanase activity after incubation at 70 °C for 1 h. Removal of CBM1 domain has a slight negative effect on its thermostability, but the further cleavage of linker region significantly decreased its stability at high temperature. The transfer of CBM1 and linker region to another GH10 xylanase can help to increase the thermostability. In addition, hydrolase domains between the two Xyn10A proteins naturally formed a dimer structure, which became more thermostable after removing the CBM1 or/and linker region. This thermostable Xyn10A is a suitable candidate for the highly efficient fungal enzyme cocktails for biomass conversion.

Enzymatic saccharification of lignocellulosic biorefinery: Research focuses

To realize lignocellulosic biorefinery is of global interest, with enzymatic saccharification presenting an essential stage to convert polymeric sugars to mono-sugars for fermentation use. This mini-review summarizes qualitatively the research focuses discussed the review articles presented in the past 22 months and other relevant papers. The research focuses on pretreatment with improved efficiency, enhanced enzyme production with high yields and high extreme tolerance, feasible combined saccharification and fermentation processes, detailed mechanisms corresponding to the enzymatic saccharification in lignocellulosic biorefinery, and the costs are discussed.

Engineering the conserved and noncatalytic residues of a thermostable β-1,4-endoglucanase to improve specific activity and thermostability

Endoglucanases are increasingly applied in agricultural and industrial applications as a key biocatalyst for cellulose biodegradation. However, the low performance in extreme conditions seriously challenges the enzyme’s commercial utilization. To obtain endoglucanases with substantially improved activity and thermostability, structure-based rational design was carried out based on the Chaetomium thermophilum β-1,4-endoglucanase CTendo45. In this study, five mutant enzymes were constructed by substitution of conserved and noncatalytic residues using site-directed mutagenesis. Mutants were constitutively expressed in Pichia pastoris, purified, and ultimately tested for enzymatic characteristics. Two single mutants, Y30F and Y173F, increased the enzyme’s specific activity 1.35- and 1.87-fold using carboxymethylcellulose sodium (CMC-Na) as a substrate, respectively. Furthermore, CTendo45 and mutants exhibited higher activity towards β-D-glucan than that of CMC-Na, and activities of Y173F and Y30F were also increased obviously against β-D-glucan. In addition, Y173F significantly improved the enzyme’s heat resistance at 80 °C and 90 °C. More interestingly, the double mutant Y30F/Y173F obtained considerably higher stability at elevated temperatures but failed to inherit the increased catalytic efficiency of its single mutant counterparts. This work gives an initial insight into the biological function of conserved and noncatalytic residues of thermostable endoglucanases and proposes a feasible path for the improvement of enzyme redesign proposals.

Secreted protein extract analyses present the plant pathogen Alternaria alternata as a suitable industrial enzyme toolbox

Lignocellulosic plant biomass is the most abundant carbon source in the planet, which makes it a potential substrate for biorefinery. It consists of polysaccharides and other molecules with applications in pharmaceutical, food and feed, cosmetics, paper and textile industries. The exploitation of these resources requires the hydrolysis of the plant cell wall, which is a complex process. Aiming to discover novel fungal natural isolates with lignocellulolytic capacities, a screening for feruloyl esterase activity was performed in samples taken from different metal surfaces. An extracellular enzyme extract from the most promising candidate, the natural isolate Alternaria alternata PDA1, was analyzed. The feruloyl esterase activity of the enzyme extract was characterized, determining the pH and temperature optima (pH 5.0 and 55-60 °C, respectively), thermal stability and kinetic parameters, among others. Proteomic analyses derived from two-dimensional gels allowed the identification and classification of 97 protein spots from the extracellular proteome. Most of the identified proteins belonged to the carbohydrates metabolism group, particularly plant cell wall degradation. Enzymatic activities of the identified proteins (β-glucosidase, cellobiohydrolase, endoglucanase, β-xylosidase and xylanase) of the extract were also measured. These findings confirm A. alternata PDA1 as a promising lignocellulolytic enzyme producer.

SIGNIFICANCE

Although plant biomass is an abundant material that can be potentially utilized by several industries, the effective hydrolysis of the recalcitrant plant cell wall is not a straightforward process. As this hydrolysis occurs in nature relying almost solely on microbial enzymatic systems, it is reasonable to infer that further studies on lignocellulolytic enzymes will discover new sustainable industrial solutions. The results included in this paper provide a promising fungal candidate for biotechnological processes to obtain added value from plant byproducts and analogous substrates. Moreover, the proteomic analysis of the secretome of a natural isolate of Alternaria sp. grown in the presence of one of the most used vegetal substrates on the biofuels industry (sugar beet pulp) sheds light on the extracellular enzymatic machinery of this fungal plant pathogen, and can be potentially applied to developing new industrial enzymatic tools. This work is, to our knowledge, the first to analyze in depth the secreted enzyme extract of the plant pathogen Alternaria when grown on a lignocellulosic substrate, identifying its proteins by means of MALDI-TOF/TOF mass spectrometry and characterizing its feruloyl esterase, cellulase and xylanolytic activities.

A copper-controlled RNA interference system for reversible silencing of target genes in Trichoderma reesei

BACKGROUND

Trichoderma reesei is a primary lignocellulosic enzyme producer in industry. However, the mechanisms underlying cellulase synthesis as well as other physiological processes are insufficiently understood partly due to the sophisticated process for its genetic manipulation. Target gene knockdown by RNA interference (RNAi) is a powerful tool for genetic research and biotechnology in eukaryotes including filamentous fungi. Previously reported RNAi system in T. reesei was either uncontrollable or only applicable in certain nutrition state.

RESULTS

In the present study, we incorporated the copper-responsive tcu1 promoter into an RNAi-mediated silencing system to develop a controllable RNAi-mediated silencing system in T. reesei. As the proof-of-concept, a prototrophic pyr4 gene, highly expressed cel7a and xyr1 genes induced by Avicel and a fab1 gene, whose knockout has proved to be intractable, were successfully knocked down in the absence of copper when the respective RNAi fragment was expressed. Importantly, the phenotype of RNAi strains was shown to be reversed easily to mimic the complementation for excluding any unwanted effects resulted from the random integration of the hpRNA cassette by adding copper in the media. Thus, this controllable RNAi-mediated silencing system can be turned on and turned off only depending on the absence and presence of copper ions in the media, respectively, and not on the nutritional states.

CONCLUSIONS

The copper-controlled RNA interference system represents an effective tool for reversible silencing of target genes in T. reesei. This reported strategy to conditionally knock down or turn off genes will contribute to our understanding of T. reesei gene functions, especially those that are difficult to be knocked out due to various reasons. In addition, this simple and cost-effective method holds great potential for the application in synthetic biology and genetic engineering of T. reesei.

Functional characterization of the upstream components of the Hog1-like kinase cascade in hyperosmotic and carbon sensing in Trichoderma reesei

BACKGROUND

Trichoderma reesei holds a high capacity for protein secretion and represents the most important cellulase producer in industry. However, the external signal sensing and intracellular signal transduction during cellulose induction remain unclear. As one of the most pervasive signal transduction pathways in all eukaryotic species, the mitogen-activated protein kinase (MAPK) pathway and its upstream sensing and signaling components are involved in various physiological processes including stress and nutrient sensing. Particularly, the Hog1-type MAPK Tmk3 has been reported to be involved in the cellulase production in T. reesei.

RESULTS

Here we established the physiological role of two upstream regulatory branches, the Sho1 branch and the Sln1 branch, of the Hog1-type Tmk3 pathway in T. reesei. Deletion of Trste20 of the Sho1 branch or repression of Trypd1 of the Sln1 branch reduced the resistance to high salt stress, whereas TrSho1 showed an opposing effect to that of TrSte20 and the identified TrSln1 seemed to be dispensable in the osmotic regulation. The Sho1 and Sln1 branches also participated in the cell wall integrity maintenance and other stress responses (i.e. oxidative and thermo stresses). Notably, TrSho1 and TrSte20 of the Sho1 branch and TrYpd1 of the Sln1 branch were shown to be differentially involved in the cellulase production of T. reesei. Repression of Trypd1 hardly affected cellulase induction, whereas overexpression of Trypd1 resulted in the reduced production of cellulases. Contrary to the case of Trypd1, repression of Trsho1 or deletion of Trste20 significantly reduced the transcription of cellulase genes.

CONCLUSIONS

TrSho1 and TrSte20 of the Sho1 branch and TrYpd1 of the Sln1 branch are all involved in general stress responses including hyperosmotic regulation and cell wall integrity maintenance. Moreover, our study revealed that the Sho1 and Sln1 osmosensing pathways are differentially involved in the regulation of cellulase production in T. reesei. The Sho1 branch positively regulated the production of cellulases and the transcription of cellulase genes while TrYpd1 of the Sln1 branch negatively controlled the cellulase production, supporting the crosstalks of osmosensing and nutrient sensing.

Uncovering the Potential of Termite Gut Microbiome for Lignocellulose Bioconversion in Anaerobic Batch Bioreactors

Termites are xylophages, being able to digest a wide variety of lignocellulosic biomass including wood with high lignin content. This ability to feed on recalcitrant plant material is the result of complex symbiotic relationships, which involve termite-specific gut microbiomes. Therefore, these represent a potential source of microorganisms for the bioconversion of lignocellulose in bioprocesses targeting the production of carboxylates. In this study, gut microbiomes of four termite species were studied for their capacity to degrade wheat straw and produce carboxylates in controlled bioreactors. All of the gut microbiomes successfully degraded lignocellulose and up to 45% w/w of wheat straw degradation was observed, with the Nasutitermes ephratae gut-microbiome displaying the highest levels of wheat straw degradation, carboxylate production and enzymatic activity. Comparing the 16S rRNA gene diversity of the initial gut inocula to the bacterial communities in lignocellulose degradation bioreactors revealed important changes in community diversity. In particular, taxa such as Spirochaetes and Fibrobacteres that were highly abundant in the initial gut inocula were replaced by Firmicutes and Proteobacteria at the end of incubation in wheat straw bioreactors. Overall, this study demonstrates that termite-gut microbiomes constitute a reservoir of lignocellulose-degrading bacteria that can be harnessed in artificial conditions for biomass conversion processes that lead to the production of useful molecules.

A β-xylosidase hyper-production Penicillium oxalicum mutant enhanced ethanol production from alkali-pretreated corn stover

β-Xylosidase activity is deficient in most cellulase enzymes secreted by filamentous fungi, which limits effective enzymatic hydrolysis of hemicellulose in lignocellulose materials and resulted in accumulation of xylo-oligosaccharides that inhibit the cellulase and xylanase activitives. An endogenous β-xylosidase gene, xyl3A, was overexpressed using two types of promoters in cellulolytic P. oxalicum RE-10. The mutants RXyl, RGXyl-1 and RGXyl-2 displayed higher β-xylosidase production than native strain RE-10 besides higher cellulase and xylanase activities, especially RGXyl-1, showing the highest β-xylosidase activity of 15.05±1.79IU/mL, about 29 folds higher than native strain, more than the highest level reported by literature. Enzymatic hydrolysis results indicated the cellulase RGXyl-1 not only increased glucose and xylose yields and thus resulted in high ethanol yield during the simultaneous saccharification and fermentation, but decreased the total enzyme loading compared to starting RE-10, which indicated a good prospect of industrial application in bioconversion of lignocellulose.

Genetic engineering of Trichoderma reesei cellulases and their production

Lignocellulosic biomass, which mainly consists of cellulose, hemicellulose and lignin, is the most abundant renewable source for production of biofuel and biorefinery products. The industrial use of plant biomass involves mechanical milling or chipping, followed by chemical or physicochemical pretreatment steps to make the material more susceptible to enzymatic hydrolysis. Thereby the cost of enzyme production still presents the major bottleneck, mostly because some of the produced enzymes have low catalytic activity under industrial conditions and/or because the rate of hydrolysis of some enzymes in the secreted enzyme mixture is limiting. Almost all of the lignocellulolytic enzyme cocktails needed for the hydrolysis step are produced by fermentation of the ascomycete Trichoderma reesei (Hypocreales). For this reason, the structure and mechanism of the enzymes involved, the regulation of their expression and the pathways of their formation and secretion have been investigated in T. reesei in considerable details. Several of the findings thereby obtained have been used to improve the formation of the T. reesei cellulases and their properties. In this article, we will review the achievements that have already been made and also show promising fields for further progress.

Synthetic plant glycans

For more than a century the primary carbon source for the production of fuels, chemicals and many materials has been fossil resources. Recently, plant polysaccharides from non-food biomass have emerged as a promising renewable alternative that may displace a significant fraction of petroleum-derived products. As a food source, plant polysaccharides can provide beneficial effects on the human immune system in the form of dietary fiber. Despite the strong impact of plant glycans on society and human health, their chemical synthesis remains largely unexplored compared to the synthesis of mammalian and bacterial glycans. Synthetic glycans such as described in this review provide an important toolbox for studying the role of carbohydrates in plant biology and their interaction with human health.

Comparative transcriptome analysis reveals different strategies for degradation of steam-exploded sugarcane bagasse by Aspergillus niger and Trichoderma reesei

Background

Second generation (2G) ethanol is produced by breaking down lignocellulosic biomass into fermentable sugars. In Brazil, sugarcane bagasse has been proposed as the lignocellulosic residue for this biofuel production. The enzymatic cocktails for the degradation of biomass-derived polysaccharides are mostly produced by fungi, such as Aspergillus niger and Trichoderma reesei. However, it is not yet fully understood how these microorganisms degrade plant biomass. In order to identify transcriptomic changes during steam-exploded bagasse (SEB) breakdown, we conducted a RNA-seq comparative transcriptome profiling of both fungi growing on SEB as carbon source.

Results

Particular attention was focused on CAZymes, sugar transporters, transcription factors (TFs) and other proteins related to lignocellulose degradation. Although genes coding for the main enzymes involved in biomass deconstruction were expressed by both fungal strains since the beginning of the growth in SEB, significant differences were found in their expression profiles. The expression of these enzymes is mainly regulated at the transcription level, and A. niger and T. reesei also showed differences in TFs content and in their expression. Several sugar transporters that were induced in both fungal strains could be new players on biomass degradation besides their role in sugar uptake. Interestingly, our findings revealed that in both strains several genes that code for proteins of unknown function and pro-oxidant, antioxidant, and detoxification enzymes were induced during growth in SEB as carbon source, but their specific roles on lignocellulose degradation remain to be elucidated.

Conclusions

This is the first report of a time-course experiment monitoring the degradation of pretreated bagasse by two important fungi using the RNA-seq technology. It was possible to identify a set of genes that might be applied in several biotechnology fields. The data suggest that these two microorganisms employ different strategies for biomass breakdown. This knowledge can be exploited for the rational design of enzymatic cocktails and 2G ethanol production improvement.

Electronic supplementary material

The online version of this article (doi:10.1186/s12864-017-3857-5) contains supplementary material, which is available to authorized users.

Recombinant expression of Thermobifida fusca E7 LPMO in Pichia pastoris and Escherichia coli and their functional characterization

The discovery of lytic polysaccharides monooxygenases copper dependent (LPMOs) revolutionized the classical concept that the cleavage of cellulose is a hydrolytic process in recent years. These enzymes carry out oxidative cleavage of cellulose (and other polysaccharides), acting synergistically with cellulases and other hydrolases. In fact, LPMOs have the potential for increasing the efficiency of the lignocellulosic biomass conversion in biofuels and high value chemicals. Among a small number of microbial LPMOs that have been characterized, some LPMOs were expressed and characterized biochemically from the bacteria Thermobifida fusca, using the host Escherichia coli. In this work, the E7 LPMO protein of T. fusca was expressed both in E. coli (native DNA sequence) and Pichia pastoris (codon-optimized DNA sequence), for further analysis of oxidative cleavage, with PASC (phosphoric acid swollen cellulose) and Avicel PH-101 substrates, using mass spectrometry analysis. Mass spectra results of Avicel PH-101 and PASC cleavages by purified E7 LPMO expressed in E. coli and in P. pastoris allowed the visualization of compounds corresponding to oxidized and non-oxidized oligosaccharides. Further optimization of reactions will be performed, since it was found only one degree of polymerization (DP 7). This work demonstrated that it is possible to produce the E7 LPMO from T. fusca in the host P. pastoris, and the recombinant protein was shown to be active on cellulose. The approach used in the present work could be an alternative to produce this bacterial LPMO for cellulose cleavage.

Boosting LPMO-driven lignocellulose degradation by polyphenol oxidase-activated lignin building blocks

BACKGROUND

Many fungi boost the deconstruction of lignocellulosic plant biomass via oxidation using lytic polysaccharide monooxygenases (LPMOs). The application of LPMOs is expected to contribute to ecologically friendly conversion of biomass into fuels and chemicals. Moreover, applications of LPMO-modified cellulose-based products may be envisaged within the food or material industry.

RESULTS

Here, we show an up to 75-fold improvement in LPMO-driven cellulose degradation using polyphenol oxidase-activated lignin building blocks. This concerted enzymatic process involves the initial conversion of monophenols into diphenols by the polyphenol oxidase MtPPO7 from Myceliophthora thermophila C1 and the subsequent oxidation of cellulose by MtLPMO9B. Interestingly, MtPPO7 shows preference towards lignin-derived methoxylated monophenols. Sequence analysis of genomes of 336 Ascomycota and 208 Basidiomycota reveals a high correlation between MtPPO7 and AA9 LPMO genes.

CONCLUSIONS

The activity towards methoxylated phenolic compounds distinguishes MtPPO7 from well-known PPOs, such as tyrosinases, and ensures that MtPPO7 is an excellent redox partner of LPMOs. The correlation between MtPPO7 and AA9 LPMO genes is indicative for the importance of the coupled action of different monooxygenases in the concerted degradation of lignocellulosic biomass. These results will contribute to a better understanding in both lignin deconstruction and enzymatic lignocellulose oxidation and potentially improve the exploration of eco-friendly routes for biomass utilization in a circular economy.