The micro-, submicron-, and nanoplastic hunt: A review of detection methods for plastic particles

Monitoring nanoplastic aging in situ by moth-eye mimic plasmonic substrates

Micro-nano plastics aging is crucial as it determines the environmental fate of each plastic particle, yet few studies involved in situ aging of nanoplastics. Herein, we utilized nanosphere lithography combined with goldnanorod assembly to prepare a moth-eye mimic plasmonic substrate featuring excellent SERS performance. The substrate was applied to in situ characterize the degradation process of PS nanoplastics during UV aging. Raman spectra evidence that the substrate is sensitive to superficial chemical changes of PS nanoplastics at initial stage during 24 h of continuous UV aging. The disruption of the benzene ring skeleton, the oxidation of the side chains of PS nanoplastics during UV aging, and the presence of oxidized methylene straight chains were identified. Practical applications in environmental sample revealed the chemical changes of PP, PS, and PE, which confirm the great potential of this SERS substrate for aging studies of nanoplastics.

An Electrochemiluminescence-Activated Amphiphilic Perylene Diimide Probe: Enabling Highly Sensitive and Selective Detection of Polypropylene Nanoplastics in the Environment

Nanoplastic pollution has emerged as a significant issue in both the environmental and human health fields. However, developing highly sensitive approaches to promptly identify and detect low concentrations of nanoplastics within complex systems remains a considerable challenge. Here, we utilized the amphiphilic perylene diimide (PDI-NH2) as a probe in combination with electrochemiluminescence (ECL) for the sensitive detection of polypropylene (PP) nanoplastics. The PDI-NH2 probe shows a remarkable enhancement of the ECL signal on PP in aqueous solutions, presenting a concentration-dependent response. This enables the ultrasensitive and specific detection of PP in aqueous solutions with a detection limit as low as 0.948 mg·L-1. A series of comprehensive experiments indicate that PDI-NH2 binds to PP through electrostatic and hydrophobic interactions. Moreover, isothermal titration calorimetry and density functional theory (DFT) calculations further confirm that the enhancement of the ECL signal can be attributed to the strong and significant affinity between PDI-NH2 and nanoplastics. This strong affinity leads to a significantly high electron transfer rate. Additionally, it is notable that the ECL probe proved its effectiveness in detecting PP in actual samples, opening up possibilities for its application in monitoring and assessing nanoplastics pollution in various environmental and industrial settings.

Ecotoxicological Effects of Nanoplastic and Microplastic Polystyrene Particles on Hyalella azteca: A Comprehensive Study on the Impact of Physical and Chemical Surface Properties

The ecotoxicological effects of nanoplastic (NPs) and microplastic (MPs) polystyrene particles' (PS) on Hyalella azteca were studied in three tests designed to investigate various hypotheses and explore potential mechanisms of interaction between MPs, NPs and this species. The following materials were used: fluorescent nanoplastic nanoPS of 15-18 nm diameter, non-modified nanoPS 25 nm, and functionalized (aminometyl)polystyrene (PS-NH2). Short-term exposure of 7 and 14 days, and long-term exposure of 42 days, were conducted using three different types of PS at varying concentrations (0.01, 0.18, 1, 18, 180 mg L-1). The experiments were carried out through two methods: PS introduced via food and PS dispersed in the environment (referred to as the "medium"). The effects were comprehensively assessed by measuring the activity of selected oxidative stress biomarkers (acetylcholinesterase AChE, catalase CAT, and glutathione s-transferase GST), and monitoring parameters such as size, growth, reproduction rate, and the presence of possible malformations. The statistically significant effect was observed with PS-NH2 (37-74 μm) and fluorescent nanoPS (15-18 nm), whereas nanoPS of 25 nm were nearly inert. The discussion is focused on four observed aspects: (i) the impact of the surface characteristics and functional group modifications of PS particles on their overall effect on biota, (ii) the limitations of using a typical concentration parameter for tests comparison, with a proposal to adopt total surface area of MPs and NPs instead - reflecting the overall surface exposed to the environment, rather than solely relying on the mass or volume, (iii) the influence of feeding regimen (exposure at varying concentrations in food or medium compared to no exposure) on the ecotoxicological effect, and (iv) the potential of Hyalella azteca as a sentinel species for monitoring microplastic transport in both freshwater and brackish waters environments. Finally, the physical and chemical properties of all three PS types were characterized to better understand their mutual interaction with biota from the material perspective.

Potential Health Risk of Microplastic Exposures from Skin-Cleansing Products

This research aims to investigate and quantify the possible presence of microplastics (MPs) in usual skin-cleansing products (i.e., liquid soap, micellar water, and micellar cleansing oil), the most popular from the market in terms of brand and customer confidence. Therefore, optical microscopy and micro-Fourier transform infrared spectroscopy (micro-FTIR) were used to determine the MPs' number, color, shape, size, and chemical composition. For the first time, the results were correlated with the possible exposure paths (i.e., inhalation, ingestion, or adsorption) to assess the human health risk of the analyzed micellar-based cleansers in terms of chronic total exposure dose to microplastics. Finally, a statistical analysis was added to this study for source prediction of MPs in skin-cleansing samples in terms of morphology, chemical composition, and other factors (i.e., brand, packaging, etc.). The various exposures and toxicities of MPs were assessed in terms of potential health risk, knowing that their toxic effect depends on the polymeric structure strongly linked with the size, shape, and concentration in the products.

Interactive toxicity effects of metronidazole, diclofenac, ibuprofen, and differently functionalized nanoplastics on marine algae Chlorella sp

Pharmaceutical products (PPs) and nanoplastics (NPs) are prominent emerging contaminants that pose serious threats to marine ecosystems. The present study aimed to investigate both pristine and combined toxicity of PPs (metronidazole, diclofenac, and ibuprofen) and polystyrene nanoplastics (PSNPs) with amine (NH2-PSNPs) and carboxyl (COOH-PSNPs) surface functionalization on marine microalgae Chlorella variabilis. Toxicity assessment included the evaluation of growth inhibition, total reactive oxygen species production, malondialdehyde content, antioxidant activity, and photosynthetic activity. Furthermore, changes in the surface functional groups of the algae after exposure to contaminants were examined. The correlation among the toxicity endpoints was assessed using Pearson correlation and cluster heatmap analysis. Zeta potential analysis and hydrodynamic size measurements revealed that the PSNPs became unstable in the presence of PPs. This instability facilitated the aggregation and rapid settlement of PSNPs, consequently impeding their direct interaction with algal cells. Growth inhibition results indicated that Chlorella variabilis exhibited minimal growth inhibition when exposed to pristine PPs (1 mg L-1), whereas PSNPs (1 mg L-1) caused substantial growth inhibition. Notably, the combined toxicity of PSNPs and PPs was lower compared to pristine PSNPs. The independent action model revealed that the combination of PPs and PSNPs showed an antagonistic mode of interaction. The potential reasons for the decreased toxicity observed in the mixture of PSNPs and PPs compared to pristine PSNPs can be attributed to diminished oxidative stress and enhanced photosynthetic activity. These findings provide valuable insights into the role of PPs in modulating the toxicity of PSNPs towards microalgae.

Novel Pyrolysis-Assisted Cataluminescence System for Fingerprint Discrimination of Various Microplastics

As emerging pollutants, microplastics are pervasive in marine, terrestrial, and atmospheric environments as well as human tissues due to their small size, large specific surface area, and strong adsorption capacity. Consequently, developing efficient and rapid methods for identifying and differentiating microplastics is critical. Herein, a novel pyrolysis-assisted cataluminescence (CTL) sensor array was constructed, capable of efficiently distinguishing seven distinct types of microplastic samples. By pyrolyzing microplastics at high temperatures into small molecular compounds and introducing them into the CTL sensor array, which was based on 0-9% Eu3+-doped LaAlO3 as sensing materials, the system achieved a response time of no more than 2 s and an average recovery time of approximately 7 s. Through the integration of thermodynamic (signal-to-noise ratio) and kinetic (response time) factors from the CTL response curves, unique fingerprint patterns were generated, enabling high-throughput and rapid differentiation of multiple microplastics. Mechanistic studies revealed that the doping with Eu3+ ions played a dominant role in regulating the CTL signal. Different microplastic samples generated distinct types and concentrations of reaction intermediates during the pyrolysis-assisted CTL process, leading to variations in luminescence efficiency and thus forming unique fingerprint patterns. The proposed front-end pyrolysis combined with the back-end CTL method provided valuable insights for the rapid differentiation of structurally complex and low-reactive emerging pollutants, particularly nonvolatile solid samples, thereby expanding the application scope of CTL detection.

Mechanism of quiescent nanoplastic formation from semicrystalline polymers

Polymers are known to spontaneously produce microplastics (sizes 1 μm - 3 mm) and nanoplastics (10 nm - 1 μm). Still, the mechanisms by which environmentally-triggered Å-level random bond breaking events lead to the formation of these relatively large fragments are unclear. Significantly, ≈ 70% of commercial polymers are semicrystalline, with a morphology comprised of alternating crystalline and amorphous layers, each tens of nanometers thick. It is well-accepted that chain scission events accumulate in the amorphous phase. We show that this leads to mechanical failure and the concurrent release of particulate nanoplastics comprised of polydisperse stacks of lamellae even under quiescent conditions. Noncrystalline analogs, which do not have a well-defined microstructure, do not form nanoplastics. While the amorphous phase of the semicrystalline nanoplastics continues to degrade, crystal fragments do not, and hence, they temporally persist in the environment. These results stress the critical role of polymer microstructure and fracture mechanics on particulate nanoplastic creation.

An efficient SERS detection platform based on roseate petal homochiral nanogold (Au RHNs) as substrate for sensitive detection of plastics in environmental water samples

Excessive plastic consumption can pose potential risks to the human respiratory and circulatory systems, leading to various diseases. Therefore, the sensitive detection of plastics holds significant implications for ensuring food safety, environmental protection, and human health. Conducting tests on rivers and drinking water can ensure their compliance with relevant safety standards, thereby mitigating the potential environmental and health risks associated with plastic pollution. In this experiment, we prepared a roseate petal homochiral nanogold (Au RHNs) as a surface-enhanced Raman scattering (SERS) substrate for detecting plastics in the water. Due to the intricate rose petal-like surface and structures with symmetry breaking, which result in a large surface area, the mean enhancement factor (EF) of the Au RHNs was determined to be 8.4696 × 105. The Au RHNs as the SERS substrate were used to test the plastic polyethylene (PE) and polyvinyl chloride (PVC), with the detection limits of 0.0986 mg/mL and 0.0975 mg/mL, respectively. Moreover, the prepared Au RHNs substrate were successfully applied for ananlyzing analyze actual samples (tap water, mineral water, river water), yielding a satisfactory recovery rate. The exceptional performance of Au RHNs as a SERS detection substrate indicated its promising potential for practical detection of plastic samples.

Exploring the Biological Effects of Polystyrene Nanoplastics on Spermatogenesis: Insights From Transcriptomic Analysis in Mouse Spermatocytes

The presence of polystyrene plastics in the human testis has raised concerns, yet their biological activity remains poorly characterized. This study aimed to investigate the biological effects and potential regulatory genes of polystyrene nanoplastics on spermatocyte line, GC-2spd(ts). After a 24-h exposure to polystyrene nanoplastics, the results indicated cell membrane disruption, impairment of mitochondrial membrane potential, increased levels of reactive oxygen species (ROS), and induced DNA damage. Furthermore, a comprehensive transcriptomic analysis was conducted, revealing differential gene expression patterns in GC-2spd(ts) cells in response to polystyrene nanoplastics. A total of 134 differentially expressed genes (DEGs) were identified, with 48 genes upregulated and 86 genes downregulated. The Gene Ontology analysis highlighted the involvement of these genes in various spermatogenesis-related biological processes, including acrosome reaction, sperm mitochondrial organization, sperm annulus, and outer acrosomal membrane. Subsequently, the quantification of gene expression through qRT-PCR identified five key genes (NSUN7, SEPTIN4, TRIM36, EQTN, and SYT8) screened from the DEGs. In conclusion, this study provides valuable insights into the biological effects of polystyrene nanoplastics on mouse spermatocytes using comprehensive transcriptomic analysis, contributing to the establishment of a foundation for future investigations into these relevant pathways.

Toxicological complexity of microplastics in terrestrial ecosystems

Microplastics (MPs), defined as plastic debris, smaller than <5 mm, are viewed as persistent contaminants that significantly modify terrestrial ecosystems and biodiversity by altering soil microbiota, structure, and functions. This paper summarizes MPs' interactions with various pollutants, including heavy metals and pesticides, also addressing socio-economic impacts, such as reduced agricultural yields and threats to regional fisheries. The study emphasizes the need for an on the basis of waste management model to mitigate these effects, advocating for collaborative efforts among stakeholders. Also, interdisciplinary studies incorporating material sciences, ecology, and environmental policy are essential to confront the challenges of MPs to ecological services. Additionally, the review highlights how MPs can serve as vectors for toxins to damage soil health and species survival. The overview underscores a complex interplay between environmental and socio-economic systems, addressing the urgency of harnessing MPs pollution and protecting ecosystem integrity and sustainability.

Exploring Innovative Approaches for the Analysis of Micro- and Nanoplastics: Breakthroughs in (Bio)Sensing Techniques

Plastic pollution, particularly from microplastics (MPs) and nanoplastics (NPs), has become a critical environmental and health concern due to their widespread distribution, persistence, and potential toxicity. MPs and NPs originate from primary sources, such as cosmetic microspheres or synthetic fibers, and secondary fragmentation of larger plastics through environmental degradation. These particles, typically less than 5 mm, are found globally, from deep seabeds to human tissues, and are known to adsorb and release harmful pollutants, exacerbating ecological and health risks. Effective detection and quantification of MPs and NPs are essential for understanding and mitigating their impacts. Current analytical methods include physical and chemical techniques. Physical methods, such as optical and electron microscopy, provide morphological details but often lack specificity and are time-intensive. Chemical analyses, such as Fourier transform infrared (FTIR) and Raman spectroscopy, offer molecular specificity but face challenges with smaller particle sizes and complex matrices. Thermal analytical methods, including pyrolysis gas chromatography-mass spectrometry (Py-GC-MS), provide compositional insights but are destructive and limited in morphological analysis. Emerging (bio)sensing technologies show promise in addressing these challenges. Electrochemical biosensors offer cost-effective, portable, and sensitive platforms, leveraging principles such as voltammetry and impedance to detect MPs and their adsorbed pollutants. Plasmonic techniques, including surface plasmon resonance (SPR) and surface-enhanced Raman spectroscopy (SERS), provide high sensitivity and specificity through nanostructure-enhanced detection. Fluorescent biosensors utilizing microbial or enzymatic elements enable the real-time monitoring of plastic degradation products, such as terephthalic acid from polyethylene terephthalate (PET). Advancements in these innovative approaches pave the way for more accurate, scalable, and environmentally compatible detection solutions, contributing to improved monitoring and remediation strategies. This review highlights the potential of biosensors as advanced analytical methods, including a section on prospects that address the challenges that could lead to significant advancements in environmental monitoring, highlighting the necessity of testing the new sensing developments under real conditions (composition/matrix of the samples), which are often overlooked, as well as the study of peptides as a novel recognition element in microplastic sensing.

Hyperspectral imaging of acoustically trapped plastics

Hyperspectral (HS) imaging bridges conventional imaging into spectroscopy and generates a spatial map of spectral variations. On the one hand, in HS imaging, the effect of the background on the final spectra has to be removed or managed. On the other hand, there are important classes of materials that need to be immobilized for investigation. In this Letter, we introduce acoustic trapping (AT) for contactless, nondestructive, and easy-to-implement immobilization of particles of up to several mm sizes, subjected to HS imaging experiments. We apply and validate the combined HS-AT apparatus for the identification of plastics, which these days have caused a multifaceted environmental pollution threat. We show that fluorescent HS imaging provides distinguishable fluorescent spectral signatures for an array of different acoustically trapped plastics. Moreover, the HS-AT enables tomographic spatio-spectral information of multi-component plastic samples by means of their acoustically controlled rotation. The integrated HS-AT has the potential to serve as a benchtop identification device.

Detection of micro- and nanoplastic particles in leafy green vegetables by SERS coupled with gold-silver core-shell nanoparticles

A sensitive and accurate method has been developed for detecting and quantifying polystyrene (PS) and polyethylene (PE) in food samples using surface-enhanced Raman spectroscopy (SERS) with a simple preparation process. The method is designed to effectively detect and quantify mixtures of these polymers in varying ratios within the food matrix. By employing gold-silver core-shell nanoparticles (Au@Ag NPs) as the enhancing substrate, the SERS method demonstrated superior sensitivity in detecting trace amounts of micro- and nanoplastic particles (MNPs). For 1-µm PS microparticles, the limit of detection (LOD) values range from 12 to 50 mg/L or mg/kg in water, spinach, and kale, while for 100-nm PS nanoparticles, the LOD values range from 18 to 47 mg/L or mg/kg. For 1-µm PE microparticles, the LOD values range from 173 to 416 mg/L or mg/kg in the same matrices, whereas for 65-nm PE nanoparticles, the values range from 446 to 744 mg/L or mg/kg. The mixtures of PS and PE in varying ratios were also tested, with both plastics detectable even at trace levels, emphasizing the method's precision in detecting plastic contaminants. These findings highlight the potential of SERS as a powerful tool for monitoring MNP contamination in food products by detecting both individual plastics and their mixtures, enabling precise quantification of contamination and contributing to improved food safety.

Microplastics and nanoplastics in cardiovascular disease-a narrative review with worrying links

With the widespread use of plastic products and the increase in waste, microplastics and nanoplastics (MNPs) have become an important issue in global environmental pollution. In recent years, an increasing number of studies have shown that MNPs may have negative impacts on human health. This review aimed to explore the association between MNPs and cardiovascular disease and provide an outlook for future research. Research has shown that there may be a link between MNPs exposure and cardiovascular disease. Laboratory studies have shown that animals exposed to MNPs often exhibit abnormalities in the cardiovascular system, such as increased blood pressure, vascular inflammation, and myocardial damage. Epidemiological surveys have also revealed that people exposed to MNPs are more likely to suffer from cardiovascular diseases, such as hypertension and myocardial infarction. Although the specific impact mechanism is not fully understood, there are several possible pathways of action, including the effects of toxic substances on MNPs and interference with the endocrine system. In summary, MNPs exposure may have a negative impact on cardiovascular health, but further research is needed to confirm its specific mechanism and extent of impact to guide relevant public health and environmental policies.

Selective Labeling of Small Microplastics with SERS-Tags Based on Gold Nanostars: Method Optimization Using Polystyrene Beads and Application in Environmental Samples

Microplastics pollution is being unanimously recognized as a global concern in all environments. Routine analysis protocols foresee that samples, which are supposed to contain up to hundreds of microplastics, are eventually collected on nanoporous filters and inspected by microspectroscopy techniques like micro-FTIR or micro-Raman. All particles, whether made of plastic or not, must be inspected one by one to detect and count microplastics. This makes it extremely time-consuming, especially when Raman is adopted, and indeed mandatory for the small microplastic fraction. Inspired by the principles of cell labeling, the present study represents the first report in which gold nanostars (AuNS) are functionalized to act as SERS-tags and used to selectively couple to microplastics. The intrinsic bright signals provided by the SERS-tags are used to run a quick scan over a wide filter area with roughly 2 orders of magnitude shorter analysis time in respect of state of the art in micro- and nanoplastics detection by μ-Raman. The applicability of the present protocol has been validated at the proof-of-concept level on both fabricated and real offshore marine samples. It is indeed worth mentioning that a SERS-based approach is herein successfully applied on filters and protocols routinely adopted in environmental microplastics monitoring, paving the way for future implementations and applications.

Orally Ingested Micro- and Nano-Plastics: A Hidden Driver of Inflammatory Bowel Disease and Colorectal Cancer

Micro- and nano-plastics (MNPLs) can move along the food chain to higher-level organisms including humans. Three significant routes for MNPLs have been reported: ingestion, inhalation, and dermal contact. Accumulating evidence supports the intestinal toxicity of ingested MNPLs and their role as drivers for increased incidence of colorectal cancer (CRC) in high-risk populations such as inflammatory bowel disease (IBD) patients. However, the mechanisms are largely unknown. In this review, by using the leading scientific publication databases (Web of Science, Google Scholar, Scopus, PubMed, and ScienceDirect), we explored the possible effects and related mechanisms of MNPL exposure on the gut epithelium in healthy conditions and IBD patients. The summarized evidence supports the idea that oral MNPL exposure may contribute to intestinal epithelial damage, thus promoting and sustaining the chronic development of intestinal inflammation, mainly in high-risk populations such as IBD patients. Colonic mucus layer disruption may further facilitate MNPL passage into the bloodstream, thus contributing to the toxic effects of MNPLs on different organ systems and platelet activation, which may, in turn, contribute to the chronic development of inflammation and CRC development. Further exploration of this threat to human health is warranted to reduce potential adverse effects and CRC risk.

In-situ detection of microplastics in the aquatic environment: A systematic literature review

Microplastics are ubiquitous in the aquatic environment and have emerged as a significant environmental issue due to their potential impacts on human health and the ecosystem. Current laboratory-based microplastic detection methods suffer from various drawbacks, including a lack of standardisation, limited spatial and temporal coverage, high costs, and time-consuming procedures. Consequently, there is a need for the development of in-situ techniques to detect and monitor microplastics to effectively identify and understand their sources, pathways, and behaviours. Herein, we adopt a systematic literature review method to assess the development and application of experimental and field technologies designed for the in-situ detection and monitoring of aquatic microplastics, without the need for sample preparation. Four scientific databases were searched in March 2023, resulting in a review of 62 relevant studies. These studies were classified into seven sensor categories and their working principles were discussed. The sensor classes include optical devices, digital holography, Raman spectroscopy, other spectroscopy, hyperspectral imaging, remote sensing, and other methods. We also looked at how data from these technologies are integrated with machine learning models to develop classifiers capable of accurately characterising the physical and chemical properties of microplastics and discriminating them from other particles. This review concluded that in-situ detection of microplastics in aquatic environments is feasible and can be achieved with high accuracy, even though the methods are still in the early stages of development. Nonetheless, further research is still needed to enhance the in-situ detection of microplastics. This includes exploring the possibility of combining various detection methods and developing robust machine-learning classifiers. Additionally, there is a recommendation for in-situ implementation of the reviewed methods to assess their effectiveness in detecting microplastics and identify their limitations.

Beyond surface: Unveiling ecological and economic ramifications of microplastic pollution in the oceans

Every year, the global production of plastic waste reaches a staggering 400 million metric tons (Mt), precipitating adverse consequences for the environment, food safety, and biodiversity as it degrades into microplastics (MPs). The multifaceted nature of MP pollution, coupled with its intricate physiological impacts, underscores the pressing need for comprehensive policies and legislative frameworks. Such measures, alongside advancements in technology, hold promise in averting ecological catastrophe in the oceans. Mandated legislation represents a pivotal step towards restoring oceanic health and securing the well-being of the planet. This work offers an overview of the policy hurdles, legislative initiatives, and prospective strategies for addressing global pollution due to MP. Additionally, this work explores innovative approaches that yield fresh insights into combating plastic pollution across various sectors. Emphasizing the importance of a global plastics treaty, the article underscores its potential to galvanize collaborative efforts in mitigating MP pollution's deleterious effects on marine ecosystems. Successful implementation of such a treaty could revolutionize the plastics economy, steering it towards a circular, less polluting model operating within planetary boundaries. Failure to act decisively risks exacerbating the scourge of MP pollution and its attendant repercussions on both humanity and the environment. Central to this endeavor are the formulation, content, and execution of the treaty itself, which demand careful consideration. While recognizing that a global plastics treaty is not a panacea, it serves as a mechanism for enhancing plastics governance and elevating global ambitions towards achieving zero plastic pollution by 2040. Adopting a life cycle approach to plastic management allows for a nuanced understanding of possible trade-offs between environmental impact and economic growth, guiding the selection of optimal solutions with socio-economic implications in mind. By embracing a comprehensive strategy that integrates legislative measures and technological innovations, we can substantially reduce the influx of marine plastic litter at its sources, safeguarding the oceans for future generations.

Coastal plastic pollution: A global perspective

Coastal ecosystems have ecological importance worldwide and require control and prevention measures to mitigate human pollution. The objective of this study was to perform a systematic review to provide a comprehensive overview of the global issue of coastal plastic pollution. 689 articles were eligible for qualitative synthesis and 31 were considered for quantitative analysis. There was an exponential increase in articles addressing coastal plastic pollution over the past 50 years. Studies were mainly carried out on beaches, and plastic bottles were the most found item, followed by cigarette butts. Polyethylene was the predominant plastic polymer, and white microplastic fragments stood out. China published most articles on the topic and Brazil had the highest number of sites sampled. Meta-analysis had significant effect sizes based on the reported data. These findings carry significant implications for environmental policies, waste management practices, and targeted awareness campaigns aimed at mitigating plastic pollution.

Submicrometer Particle Impact Dynamics and Chemistry

Experimental studies of the collision phenomena of submicrometer particles is a developing field. This review examines the range of phenomena that can be observed with new experimental approaches. The primary focus is on single-particle impact studies enabled by charge detection mass spectrometry (CDMS) implemented using the Aerosol Impact Spectrometer (AIS) at the University of California, San Diego. The AIS combines electrospray ionization, aerodynamic lens techniques, CDMS, and an electrostatic linear accelerator to study the dynamics of particle impact over a wide range of incident velocities. The AIS has been used for single-particle impact experiments on positively charged particles of diverse composition, including polystyrene latex spheres, tin particles, and ice grains, over a wide range of impact velocities. Detection schemes based on induced charge measurements and time-of-flight mass spectrometry have enabled measurements of the impact inelasticity through the determination of the coefficient of restitution, measurements of the angular distributions of scattered submicrometer particles, and the chemical composition and dissociation of solute molecules in hypervelocity ice grain impacts.

Detection of submicron- and nanoplastics spiked in environmental fresh- and saltwater with Raman spectroscopy

Detection of small plastic particles in environmental water samples has been a topic of increasing interest in recent years. A multitude of techniques, such as variants of Raman spectroscopy, have been employed to facilitate their analysis in such complex sample matrices. However, these studies are often conducted for a limited number of plastic types in matrices with relatively little additional materials. Thus, much remains unknown about what parameters influence the detection limits of Raman spectroscopy for more environmentally relevant samples. To address this, this study utilizes Raman spectroscopy to detect six plastic particle types; 161 and 33 nm polystyrene, < 450 nm and 36 nm poly(ethylene terephthalate), 121 nm polypropylene, and 126 nm polyethylene; spiked into artificial saltwater, artificial freshwater, North Sea, Thames River, and Elbe River water. Overall, factors such as plastic particle properties, water matrix composition, and experimental setup were shown to influence the final limits of detection.

Stability and dispersibility of microplastics in experimental exposure medium and their dimensional characterization by SMLS, SAXS, Raman microscopy, and SEM

The plastic production that contributes to the global plastic reservoir presents a major challenge for society in managing plastic waste and mitigating the environmental damage of microplastic (MP) pollution. In the environment, the formation of biomolecular corona around MPs enhance the stability of MP suspensions, influencing the bioavailability and toxicity of MPs. Essential physical properties including MP stability, dispersibility, agglomeration, and dimensional size must be precisely defined and measured in complex media taking into account the formation of a protein corona. Using static multiple light scattering (SMLS), small angle X-ray scattering (SAXS), Raman microscopy, and scanning electron microscopy (SEM), we measured the particle size, density, stability, and agglomeration state of polyethylene and polypropylene MPs stabilized in aqueous suspension by BSA. SEM analysis revealed the formation of nanoplastic debris as MP suspensions aged. Our results suggest that protein adsorption favors the formation of secondary nanoplastics, potentially posing an additional threat to ecosystems. This approach provides analytical methodologies by integrating SEM, SMLS, and SAXS, for characterizing MP suspensions and highlights the effect of the protein corona on size measurements of micro/nanoplastics. Our analysis demonstrates the detectability of secondary nanoplastics by SEM, paving the way for monitoring and controlling human exposure.

Oxidative stress, biofilm-formation and activity responses of P. aeruginosa to microplastic-treated sediments: Effect of temperature and sediment type

Climate change and plastic pollution are the big environmental problems that the environment and humanity have faced in the past and will face in many decades to come. Sediments are affected by many pollutants and conditions, and the behaviors of microorganisms in environment may be influenced due to changes in sediments. Therefore, the current study aimed to explore the differential effects of various microplastics and temperature on different sediments through the metabolic and oxidative responses of gram-negative Pseudomonas aeruginosa. The sediments collected from various fields including beaches, deep-sea discharge, and marine industrial areas. Each sediment was extracted and then treated with various microplastics under different temperature (-18, +4, +20 and 35 °C) for seven days. Then microplastics were removed from the suspension and microplastic-exposed sediment samples were incubated with Pseudomonas aeruginosa to test bacterial activity, biofilm, and oxidative characteristics. The results showed that both the activity and the biofilm formation of Pseudomonas aeruginosa increased with the temperature of microplastic treatment in the experimental setups at the rates between an average of 2-39 % and 5-27 %, respectively. The highest levels of bacterial activity and biofilm formation were mainly observed in the beach area (average rate +25 %) and marine industrial (average rate +19 %) sediments with microplastic contamination, respectively. Moreover, oxidative characteristics significantly linked the bacterial activities and biofilm formation. The oxidative indicators of Pseudomonas aeruginosa showed that catalase and glutathione reductase were more influenced by microplastic contamination of various sediments than superoxide dismutase activities. For instance, catalase and glutathione reductase activities were changed between -37 and +169 % and +137 to +144 %, respectively; however, the superoxide dismutase increased at a rate between +1 and + 21 %. This study confirmed that global warming as a consequence of climate change might influence the effect of microplastic on sediments regarding bacterial biochemical responses and oxidation characteristics.

Microplastics in drinking water: A review on methods, occurrence, sources, and potential risks assessment

Microplastics in drinking water captured widespread attention following reports of widespread detection around the world. Concerns have been raised about the potential adverse effects of microplastics in drinking water on human health. Given the widespread interest in this research topic, there is an urgent need to compile existing data and assess current knowledge. This paper provides a systematic review of studies on microplastics in drinking water, their evidence, key findings, knowledge gaps, and research needs. The data collected show that microplastics are widespread in drinking water, with large variations in reported concentrations. Standardized methodologies of sampling and analysis are urgently needed. There were more fibrous and fragmented microplastics, with the majority being <10 μm in size and composed of polyester, polyethylene, polypropylene, and polystyrene. Little attention has been paid to the color of microplastics. More research is needed to understand the occurrence and transfer of microplastics throughout the water supply chain and the treatment efficiency of drinking water treatment plants (DWTPs). Methods capable of analyzing microplastics <10 μm and nanoplastics are urgently needed. Potential ecological assessment models for microplastics currently in use need to be improved to take into account the complexity and specificity of microplastics.

Convenient Size Analysis of Nanoplastics on a Microelectrode

Chemical recycling is a promising approach to reduce plastic pollution. Timely and accurate size analysis of produced nanoplastics is necessary to monitor the process and assess the quality of chemical recycling. In this work, a sandwich-type microelectrode sensor was developed for the size assessment of nanoplastics. β-Mercaptoethylamine was modified on the microelectrode to enhance its surface positive charge density. Polystyrene (PS) nanoplastics were captured on the sensor through electrostatic interactions. Ferrocene was used as an electrochemical beacon and attached to PS via hydrophobic interactions. The results show a nonlinear dependence of the sensor's current response on the PS particle size. The size resolving ability of the microelectrode is mainly attributed to the small size of the electrode and the resulting attenuation of the electric field strength. For mixed samples with different particle sizes, this method can provide accurate average particle sizes. Through an effective pretreatment process, the method can be applied to PS nanoplastics with different surface properties, ensuring its application in evaluating different chemical recycling methods.

Culture dependent analysis of bacterial activity, biofilm-formation and oxidative stress of seawater with the contamination of microplastics under climate change consideration

Temperature changes due to climate change and microplastic contamination are worldwide concerns, creating various problems in the marine environment. Therefore, this study was carried out to discover the impact of different temperatures of seawater exposed to different types of plastic materials on culture dependent bacterial responses and oxidative characteristics. Seawater was exposed to microplastics obtained from various plastic materials at different temperature (-18, +4, +20, and +35 °C) for seven days. Then microplastics were removed from the suspension and microplastic-exposed seawater samples were analyzed for bacterial activity, biofilm formation and oxidative characteristics (antioxidant, catalase, glutathione, and superoxide dismutase) using Gram-negative Pseudomonas aeruginosa and Gram-positive Staphylococcus aureus. The results showed that the activity and biofilm formation of Pseudomonas aeruginosa and Staphylococcus aureus were affected through oxidative stress by catalase, glutathione, and superoxide dismutase due to the microplastic deformation by temperature changes. This study confirms that temperature changes as a result of climate change might influence microplastic degradation and their contamination impact in seawater in terms of bacterial metabolic and oxidation reactions.

Differential scanning calorimetry (DSC): An important tool for polymer identification and characterization of plastic marine debris

Differential scanning calorimetry (DSC), a routine thermoanalytical method in material science, is gaining utility in plastic pollution research to improve polymer identification. We optimized a DSC method, experimentally testing pan types, temperature ramps, number of melts, and minimum sample masses. Using the optimized method, we created an in-house thermogram library from 201 polymer reference standards. We determined peak melting temperature cutoffs for differentiating variants of PE and nylon. PE cutoffs remained stable after experimentally weathering standards outdoors or for severely weathered HDPE debris found on Hawaii's beaches. Marine debris samples, across a range of weathering severity and previously identified as either low-density or high-density polyethylene (LDPE or HDPE) based on the 1377 cm-1 peak indicating methyl groups by attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR), were analyzed by DSC to confirm or challenge the ATR-FTIR PE differentiation. ATR-FTIR was correct for >80% of the HDPE samples, but <40% of those initially identified as LDPE by ATR-FTIR. Accuracy did not relate to weathering extent. Most samples mis-identified as LDPE were HDPE that had formed methyl groups likely from chain scission during photooxidation. ATR-FTIR alone is unreliable for differentiating weathered PE, DSC is required. We provide a multiple-method workflow for complete and accurate polymer identification, even for microplastics ≥0.03 mg. Applying these methods can better identify the polymer composition of marine debris, essential for sourcing and recycling efforts.

Analysis of micro(nano)plastics based on automated data interpretation and modeling: A review

The widespread presence of micro(nano)plastics (MNPs) in the environment threatens ecosystem integrity, and thus, it is necessary to determine and assess the occurrence, characteristics, and transport of MNPs between ecological components. However, most analytical approaches are cost- and time-inefficient in providing quantitative information with sufficient detail, and interpreting results can be difficult. Alternative analyses integrating novel measurements by imaging or proximal sensing with signal processing and machine learning may supplement these approaches. In this review, we examined published research on methods used for the automated data interpretation of MNPs found in the environment or those artificially prepared by fragmenting bulk plastics. We critically reviewed the primary areas of the integrated analytical process, which include sampling, data acquisition, processing, and modeling, applied in identifying, classifying, and quantifying MNPs in soil, sediment, water, and biological samples. We also provide a comprehensive discussion regarding model uncertainties related to estimating MNPs in the environment. In the future, the development of routinely applicable and efficient methods is expected to significantly contribute to the successful establishment of automated MNP monitoring systems.

New versus naturally aged greenhouse cover films: Degradation and micro-nanoplastics characterization under sunlight exposure

The understanding of microplastic degradation and its effects remains limited due to the absence of accurate analytical techniques for detecting and quantifying micro- and nanoplastics. In this study, we investigated the release of nanoplastics and small microplastics in water from low-density polyethylene (LDPE) greenhouse cover films under simulated sunlight exposure for six months. Our analysis included both new and naturally aged (used) cover films, enabling us to evaluate the impact of natural aging. Additionally, photooxidation effects were assessed by comparing irradiated and non-irradiated conditions. Scanning electron microscopy (SEM) and nanoparticle tracking analysis (NTA) confirmed the presence of particles below 1 μm in both irradiated and non-irradiated cover films. NTA revealed a clear effect of natural aging, with used films releasing more particles than new films but no impact of photooxidation, as irradiated and non-irradiated cover films released similar amounts of particles at each time point. Raman spectroscopy demonstrated the lower crystallinity of the released PE nanoplastics compared to the new films. Flow cytometry and total organic carbon data provided evidence of the release of additional material besides PE, and a clear effect of both simulated and natural aging, with photodegradation effects observed only for the new cover films. Finally, our results underscore the importance of studying the aging processes in both new and used plastic products using complementary techniques to assess the environmental fate and safety risks posed by plastics used in agriculture.

Submicron- and nanoplastic detection at low micro- to nanogram concentrations using gold nanostar-based surface-enhanced Raman scattering (SERS) substrates

The presence of submicron- (1 μm-100 nm) and nanoplastic (<100 nm) particles within various sample matrices, ranging from marine environments to foods and beverages, has become a topic of increasing interest in recent years. Despite this interest, very few analytical techniques are known that allow for the detection of these small plastic particles in the low concentration ranges that they are anticipated to be present at. Research focused on optimizing surface-enhanced Raman scattering (SERS) to enhance signal obtained in Raman spectroscopy has been shown to have great potential for the detection of plastic particles below conventional resolution limits. In this study, we produce SERS substrates composed of gold nanostars and assess their potential for submicron- and nanoplastic detection. The results show 33 nm polystyrene could be detected down to 1.25 μg mL-1 while 36 nm poly(ethylene terephthalate) was detected down to 5 μg mL-1. These results confirm the promising potential of the gold nanostar-based SERS substrates for nanoplastic detection. Furthermore, combined with findings for 121 nm polypropylene and 126 nm polyethylene particles, they highlight potential differences in analytical performance that depend on the properties of the plastics being studied.

Recent advances in nanotechnology-based modifications of micro/nano PET plastics for green energy applications

Poly(ethylene terephthalate) (PET) plastic is an omnipresent synthetic polymer in our lives, which causes negative impacts on the ecosystem. It is crucial to take mandatory action to control the usage and sustainable disposal of PET plastics. Recycling plastics using nanotechnology offers potential solutions to the challenges associated with traditional plastic recycling methods. Nano-based degradation techniques improve the degradation process through the influence of catalysts. It also plays a crucial role in enhancing the efficiency and effectiveness of recycling processes and modifying them into value-added products. The modified PET waste plastics can be utilized to manufacture batteries, supercapacitors, sensors, and so on. The waste PET modification methods have massive potential for research, which can play major role in removing post-consumer plastic waste. The present review discusses the effects of micro/nano plastics in terrestrial and marine ecosystems and its impacts on plants and animals. Briefly, the degradation and bio-degradation methods in recent research were explored. The depolymerization methods used for the production of monomers from PET waste plastics were discussed in detail. Carbon nanotubes, fullerene, and graphene nanosheets synthesized from PET waste plastics were delineated. The reuse of nanotechnologically modified PET waste plastics for potential green energy storage products, such as batteries, supercapacitors, and sensors were presented in this review.

Nanoplastics from disposable paper cups and microwavable food containers

Nanoplastics (NPs, <1 µm) pose greater risks due to their increased absorption rates in biological systems. In this study, we investigated the release of NPs from paper cups and microwavable food containers coated with low-density polyethylene (LDPE) and polylactic acid (PLA). For disposable paper cups, we found that LDPE-coated cups released up to 26-fold more NPs (maximum 1.9 × 107 per cup) than PLA-coated ones. The NPs release from LDPE-coated cups was increased at high temperatures above 80 °C, and further increased by physical agitation. However, negligible NP release was observed when the inner coating thickness exceeded 1 mm. For microwavable food containers, those with PLA coatings were more susceptible to the effects of microwave. Depending on the cooking time, we noticed a significant difference (up to 40000 times) in the number of released NPs between LDPE and PLA coatings. Additionally, higher microwave power level led to an increase of NPs, even with constant total energy input. Considering the release of NP, PLA coatings for disposable paper cups and LDPE coatings for microwavable food containers seem more suitable. Furthermore, our results suggest that multi-use cups significantly reduce NPs release due to their material thickness, making them a safer alternative to disposable ones.

Influence of artificial digestion on characteristics and intestinal cellular effects of micro-, submicro- and nanoplastics

The production of plastics is rising since they have been invented. Micro, submicro- and nanoplastics are produced intentionally or generated by environmental processes, and constitute ubiquitous contaminants which are ingested orally by consumers. Reported health concerns include intestinal translocation, inflammatory response, oxidative stress and cytotoxicity. Every digestive milieu in the gastrointestinal tract does have an influence on the properties of particles and can cause changes in their effect on biological systems. In this study, we subjected plastic particles of different materials (polylactic acid, polymethylmethacrylate, melamine formaldehyde) and sizes (micro- to nano-range) to a complex artificial digestion model consisting of three intestinal fluid simulants (saliva, gastric and intestinal juice). We monitored the impact of the digestion process on the particles by performing Dynamic Light Scattering, Scanning Electron Microscopy and Asymmetric Flow Field-Flow Fractionation. An in vitro model of the intestinal epithelial barrier was used to monitor cellular effects and translocation behavior of (un)digested particles. In conclusion, artificial digestion decreased cellular interaction and slightly increased transport of all particles across the intestinal barrier. The interaction with organic matter resulted in clear differences in the agglomeration behavior. Moreover, we provide evidence for polymer-, size- and surface-dependent cellular effects of the test particles.

Toxic effects of environmental-relevant exposure to polyethylene terephthalate (PET) micro and nanoparticles in zebrafish early development

Polyethylene terephthalate (PET) is a commonly used thermoplastic in industry due to its excellent malleability and thermal stability, making it extensively employed in packaging manufacturing. Inadequate disposal of PET packaging in the environment and natural physical-chemical processes leads to the formation of smaller particles known as PET micro and nanoplastics (MNPs). The reduced dimensions enhance particle bioavailability and, subsequently, their reactivity. This study involved chemical degradation of PET using trifluoroacetic acid to assess the impact of exposure to varying concentrations of PET MNPs (0.5, 1, 5, 10, and 20 mg/L) on morphological, functional, behavioral, and biochemical parameters during the early developmental stages of zebrafish (Danio rerio). Characterization of the degraded PET revealed the generated microplastics (MPs) ranged in size from 1305 to 2032 μm, and that the generated nanoplastics (NPs) ranged from 68.06 to 955 nm. These particles were then used for animal exposure. After a six-day exposure period, our findings indicate that PET MNPs can diminish spontaneous tail coiling (STC), elevate the heart rate, accumulate on the chorion surface, and reduce interocular distance. These results suggest that PET exposure induces primary toxic effects on zebrafish embryo-larval stage of development.

Sub-10 nm Nanoparticle Detection Using Multi-Technique-Based Micro-Raman Spectroscopy

Microplastic pollution is a growing public concern as these particles are ubiquitous in various environments and can fragment into smaller nanoplastics. Another environmental concern arises from widely used engineered nanoparticles. Despite the increasing abundance of these nano-sized pollutants and the possibility of interactions with organisms at the sub cellular level, with many risks still being unknown, there are only a few publications on this topic due to the lack of reliable techniques for nanoparticle characterization. We propose a multi-technique approach for the characterization of nanoparticles down to the 10 nm level using standard micro-Raman spectroscopy combined with standard atomic force microscopy. We successfully obtained single-particle spectra from 25 nm sized polystyrene and 9 nm sized TiO2 nanoparticles with corresponding mass limits of detection of 8.6 ag (attogram) and 1.6 ag, respectively, thus demonstrating the possibility of achieving an unambiguous Raman signal from a single, small nanoparticle with a resolution comparable to more complex and time-consuming technologies such as Tip-Enhanced Raman Spectroscopy and Photo-Induced Force Microscopy.

Recent advances on the methods developed for the identification and detection of emerging contaminant microplastics: a review

The widespread use of plastics, popular for their versatility and cost-efficiency in mass production, has led to their essential role in modern society. Their remarkable attributes, such as flexibility, mechanical strength, lightweight, and affordability, have further strengthened their importance. However, the emergence of microplastics (MPs), minute plastic particles, has raised environmental concerns. Over the last decade, numerous studies have uncovered MPs of varying sizes in diverse environments. They primarily originate from textile fibres and cosmetic products, with large plastic items undergoing degradation and contributing as secondary sources. The bioaccumulation of MPs, with potential ingestion by humans through the food chain, underscores their significance as environmental contaminants. Therefore, continuous monitoring of environmental and food samples is imperative. A range of spectroscopic techniques, including vibrational spectroscopy, Raman spectroscopy, Fourier-transform infrared (FT-IR) spectroscopy, hyperspectral imaging, and nuclear magnetic resonance (NMR) spectroscopy, facilitates the detection of MPs. This review offers a comprehensive overview of the analytical methods employed for sample collection, characterization, and analysis of MPs. It also emphasizes the crucial criteria for selecting practical and standardized techniques for the detection of MPs. Despite advancements, challenges persist in this field, and this review suggests potential strategies to address these limitations. The development of effective protocols for the accurate identification and quantification of MPs in real-world samples is of paramount importance. This review further highlights the accumulation of microplastics in various edible species, such as crabs, pelagic fish, finfish, shellfish, American oysters, and mussels, shedding light on the extreme implications of MPs on our food chain.

A characterization and an exposure risk assessment of microplastics in settled house floor dust in Istanbul, Turkey

The presence of microplastics in the indoor environment presents growing environmental and human health risks because of their physicochemical and toxic characteristics. Therefore, we aimed to isolate, identify, and characterize plastic debris in settled house floor dusts. This study is a rare study which assess the risks of plastic debris in settled house dust through multiple approaches including the estimated daily intake, pollution loading index, and polymer hazard index. The results indicated that polyethylene and polypropylene were the predominate polymer type of plastic debris in settled house dust with various shapes and colors. The risk assessment results also indicated the serious impact of microplastics in terms of extremely dangerous contamination as well as the fact that they present a polymer hazard. Results indicated that humans have a higher risk of exposure to microplastics via ingestion rather than inhalation. In addition, infants had a higher risk of potential intake compared to other age groups.

The comparative study by Raman spectroscopy of the plastic tide in the three ports of the Mediterranean Sea

This paper summarizes the field studies on marine microplastics (MPs) carried out in the autumn season in four various localisations within three ports chosen at the Mediterranean Sea near the French Riviera and the West Coast of Italy (within the Ligurian Sea). It considers the transport problem and the fate of the MPs introduced to the sea by analysing beach debris found on the shore after the stormy weather. Monitored ports included Saint-Tropez, Portoferraio and Porto Ercole, in which two different places were monitored. The aim is to approach the plastic tide phenomena by concentrating on a selected fraction of all MPs presented on the seashore. The final identification of debris was performed using Raman spectroscopy, providing a high-resolution signal. The PE, PP and PS contents were compared as the most frequent and representative polymers. Finally, we tackle the pending issue of the compound leakage from the MPs taking the environmentally aged particles from Portoferraio for further laboratory experiments and discuss an innovative approach with a low detection limit based on the electrochemical methods.

Tackling microplastics pollution in global environment through integration of applied technology, policy instruments, and legislation

Microplastic pollution is a serious environmental problem that affects both aquatic and terrestrial ecosystems. Small particles with size of less than 5 mm, known as microplastics (MPs), persist in the environment and pose serious threats to various species from micro-organisms to humans. However, terrestrial environment has received less attention than the aquatic environment, despite being a major source of MPs that eventually reaches water body. To reflect its novelty, this work aims at providing a comprehensive overview of the current state of MPs pollution in the global environment and various solutions to address MP pollution by integrating applied technology, policy instruments, and legislation. This review critically evaluates and compares the existing technologies for MPs detection, removal, and degradation, and a variety of policy instruments and legislation that can support the prevention and management of MPs pollution scientifically. Furthermore, this review identifies the gaps and challenges in addressing the complex and diverse nature of MPs and calls for joint actions and collaboration from stakeholders to contain MPs. As water pollution by MPs is complex, managing it effectively requires their responses through the utilization of technology, policy instruments, and legislation. It is evident from a literature survey of 228 published articles (1961-2023) that existing water technologies are promising to remove MPs pollution. Membrane bioreactors and ultrafiltration achieved 90% of MPs removal, while magnetic separation was effective at extracting 88% of target MPs from wastewater. In biological process, one kg of wax worms could consume about 80 g of plastic/day. This means that 100 kg of wax worms can eat about 8 kg of plastic daily, or about 2.9 tons of plastic annually. Overall, the integration of technology, policy instrument, and legislation is crucial to deal with the MPs issues.

Preparation of Well-Defined Fluorescent Nanoplastic Particles by Confined Impinging Jet Mixing

Research on the origin, distribution, detection, identification, and quantification of polymer nanoparticles (NPs) in the environment and their possible impact on animal and human health is surging. For different types of studies in this field, well-defined reference materials or mimics are needed. While isolated reports on the preparation of such materials are available, a simple and broadly applicable method that allows for the production of different NP types with well-defined, tailorable characteristics is still missing. Here, we demonstrate that a confined impinging jet mixing process can be used to prepare colloidally stable NPs based on polystyrene, polyethylene, polypropylene, and poly(ethylene terephthalate) with diameters below < 100 nm. Different fluorophores were incorporated into the NPs, to allow their detection in complex environments. To demonstrate their utility and detectability, fluorescent NPs were exposed to J774A.1 macrophages and visualized using laser scanning microscopy. Furthermore, we modified the NPs in a postfabrication process and changed their shape from spherical to heterogeneous geometries, in order to mimic environmentally relevant morphologies. The methodology used here should be readily applicable to other polymers and payloads and thus a broad range of NPs that enable studies of their behavior, uptake, translocation, and biological end points in different systems.

A Novel Approach for Identifying Nanoplastics by Assessing Deformation Behavior with Scanning Electron Microscopy

As plastic production continues to increase globally, plastic waste accumulates and degrades into smaller plastic particles. Through chemical and biological processes, nanoscale plastic particles (nanoplastics) are formed and are expected to exist in quantities of several orders of magnitude greater than those found for microplastics. Due to their small size and low mass, nanoplastics remain challenging to detect in the environment using most standard analytical methods. The goal of this research is to adapt existing tools to address the analytical challenges posed by the identification of nanoplastics. Given the unique and well-documented properties of anthropogenic plastics, we hypothesized that nanoplastics could be differentiated by polymer type using spatiotemporal deformation data collected through irradiation with scanning electron microscopy (SEM). We selected polyvinyl chloride (PVC), polyethylene terephthalate (PET), and high-density polyethylene (HDPE) to capture a range of thermodynamic properties and molecular structures encompassed by commercially available plastics. Pristine samples of each polymer type were chosen and individually milled to generate micro and nanoscale particles for SEM analysis. To test the hypothesis that polymers could be differentiated from other constituents in complex samples, the polymers were compared against proxy materials common in environmental media, i.e., algae, kaolinite clay, and nanocellulose. Samples for SEM analysis were prepared uncoated to enable observation of polymer deformation under set electron beam parameters. For each sample type, particles approximately 1 µm in diameter were chosen, and videos of particle deformation were recorded and studied. Blinded samples were also prepared with mixtures of the aforementioned materials to test the viability of this method for identifying near-nanoscale plastic particles in environmental media. Based on the evidence collected, deformation patterns between plastic particles and particles present in common environmental media show significant differences. A computer vision algorithm was also developed and tested against manual measurements to improve the usefulness and efficiency of this method further.

Evaluation of the Antimicrobial Activity of Chitosan Nanoparticles against Listeria monocytogenes

Chitosan is obtained from the deacetylation of chitin, and it is known to possess antimicrobial activity. It has attracted attention as it may be used for treating infections caused by different types of microorganisms due to its broad spectrum. Its application in the form of micro- or nanoparticles (CM/CN) has expanded its usage, as in this form, it retains its activity, and remain stable in aqueous solutions. However, inconsistencies in the results reported by different authors have been identified. In this communication, the antimicrobial activity of CN produced from different starting materials was tested against Listeria monocytogenes. It was observed that, even though all the starting materials were reported to have a molecular weight (MW) below 200 kDa and degree of deacetylation (DD) > 75%, the size of the CNs were significantly different (263 nm vs. 607 nm). Furthermore, these differences in sizes exerted a direct effect on the antimicrobial properties of the particles, as when testing the ones with the smallest size, i.e., 263 nm, a lower Minimum Inhibitory Concentration (MIC) was achieved, i.e., 0.04 mg/mL. Even though the largest particles, i.e., 607 nm, in individual experiments were able to achieve an MIC of 0.03 mg/mL, the results with CN presented great variation among replicates and up to 0.2 mg/mL were needed in other replicates. The starting material has a critical impact on the properties of the CN, and it must be carefully characterized and selected for the intended application, and MW and DD solely do not fully account for these properties.

Complex intestinal and hepatic in vitro barrier models reveal information on uptake and impact of micro-, submicro- and nanoplastics

Plastic particles are found almost ubiquitously in the environment and can get ingested orally by humans. We have used food-relevant microplastics (2 µm polylactic acid), submicroplastics (250 nm polylactic acid and 366 nm melamine formaldehyde resin) and nanoplastics (25 nm polymethylmethacrylate) to study material- and size-dependent uptake and transport across the human intestinal barrier and liver. Therefore, different Transwell™-based in vitro (co-)culture models were used: Differentiated Caco-2 cells mimicking the intestinal enterocyte monolayer, an M-cell model complementing the Caco-2 monoculture with antigen uptake-specialized cells, a mucus model complementing the barrier with an intestinal mucus layer, and an intestinal-liver co-culture combining differentiated Caco-2 cells with differentiated HepaRG cells. Using these complex barrier models, uptake and transport of particles were analyzed based on the fluorescence of the particles using confocal microscopy and a fluorescence-based quantification method. Additionally, the results were verified by Time-of-Flight - Secondary Ion Mass Spectrometry (ToF-SIMS) analysis. Furthermore, an effect screening at the mRNA level was done to investigate oxidative stress response, inflammation and changes to xenobiotic metabolism in intestinal and hepatic cells after exposure to plastic particles. Oxidative stress and inflammation were additionally analyzed using a flow-cytometric assay for reactive oxygen species and cytokine measurements. The results reveal a noteworthy uptake into and transport of microplastic and submicroplastic particles across the intestinal epithelium. Particularly, we show a pronounced uptake of particles into liver cells after crossing of the intestinal epithelium, using the intestinal-liver co-culture. The particles evoke some alterations in xenobiotic metabolism, but did not cause increased oxidative stress or inflammatory response on protein level. Taken together, these complex barrier models can be applied on micro-, submicro- and nanoplastics and reveal information in particle uptake, transport and cellular impact.

Nano- and Microplastics Migration from Plastic Food Packaging into Dairy Products: Impact on Nutrient Digestion, Absorption, and Metabolism

The ongoing use of plastic polymers to manufacture food packaging has raised concerns about the presence of nano- and microplastics (NMPs) in a variety of foods. This review provides the most recent data on NMPs' migration from plastic packaging into dairy products. Also discussed are the possible effects of NMPs on nutrient digestion, absorption, and metabolism. Different kinds of dairy products, including skimmed milk, whole liquid milk, powder milk, and infant formula milk, have been found to contain NMPs of various sizes, shapes, and concentrations. NMPs may interact with proteins, carbohydrates, and fats and have a detrimental impact on how well these nutrients are digested and absorbed by the body. The presence of NMPs in the gastrointestinal tract may impact how lipids, proteins, glucose, iron, and energy are metabolized, increasing the risk of developing various health conditions. In addition to NMPs, plastic oligomers released from food packaging material have been found to migrate to various foods and food simulants, though information regarding their effect on human health is limited. Viewpoints on potential directions for future studies on NMPs and their impact on nutrient digestion, absorption, and health are also presented in this review.

Correlative Light, Electron Microscopy and Raman Spectroscopy Workflow To Detect and Observe Microplastic Interactions with Whole Jellyfish

Many researchers have turned their attention to understanding microplastic interaction with marine fauna. Efforts are being made to monitor exposure pathways and concentrations and to assess the impact such interactions may have. To answer these questions, it is important to select appropriate experimental parameters and analytical protocols. This study focuses on medusae of Cassiopea andromeda jellyfish: a unique benthic jellyfish known to favor (sub-)tropical coastal regions which are potentially exposed to plastic waste from land-based sources. Juvenile medusae were exposed to fluorescent poly(ethylene terephthalate) and polypropylene microplastics (<300 μm), resin embedded, and sectioned before analysis with confocal laser scanning microscopy as well as transmission electron microscopy and Raman spectroscopy. Results show that the fluorescent microplastics were stable enough to be detected with the optimized analytical protocol presented and that their observed interaction with medusae occurs in a manner which is likely driven by the microplastic properties (e.g., density and hydrophobicity).

Micro- and Nanoplastics Breach the Blood-Brain Barrier (BBB): Biomolecular Corona's Role Revealed

Humans are continuously exposed to polymeric materials such as in textiles, car tires and packaging. Unfortunately, their break down products pollute our environment, leading to widespread contamination with micro- and nanoplastics (MNPs). The blood-brain barrier (BBB) is an important biological barrier that protects the brain from harmful substances. In our study we performed short term uptake studies in mice with orally administered polystyrene micro-/nanoparticles (9.55 µm, 1.14 µm, 0.293 µm). We show that nanometer sized particles-but not bigger particles-reach the brain within only 2 h after gavage. To understand the transport mechanism, we performed coarse-grained molecular dynamics simulations on the interaction of DOPC bilayers with a polystyrene nanoparticle in the presence and absence of various coronae. We found that the composition of the biomolecular corona surrounding the plastic particles was critical for passage through the BBB. Cholesterol molecules enhanced the uptake of these contaminants into the membrane of the BBB, whereas the protein model inhibited it. These opposing effects could explain the passive transport of the particles into the brain.

Mass spectrometry-based multimodal approaches for the identification and quantification analysis of microplastics in food matrix

Background

Microplastics (MPs) and nanoplastics (NPs) have become emerging contaminants worldwide in food matrices. However, analytical approaches for their determination have yet to be standardized. Therefore, a systematic study is urgently needed to highlight the merits of mass spectrometry (MS) based methods for these applications.

Purpose

The aim of the study is to review the current status of MS-based multimodal analysis for the determination of MPs in food matrices.

Methods

Web of Science and Google Scholar databases were searched and screened until Jan. 2023. Inclusion criteria: "publication years" was set to the last decades, "English" was selected as the "language," and "research area" was set to environmental chemistry, food analysis and polymer science. The keywords were "microplastics," "nanoplastics," "determination," "identification/quantification," and "mass spectrometry."

Results

Traditional spectrometry techniques offer good abilities to conduct the multimodal analysis of MPs in terms of color, shape and other morphologies. However, such technologies have some limitations, in particular the relatively high limits of detection. In contrast, MS-based methods supply excellent supplements. In MS-based methods, gas chromatographic-mass spectrometry (GC-MS), and LC-MS/MS were selected as representative methods for determining MPs in the food matrices, while specialized MS methods (i.e., MALDI-ToF MS and ToF-SIMS) were considered to offer great potential in multimodal analysis of MPs especially when interfaced with the imaging systems.

Significance

This study will contribute to gaining a deeper insight into the assessment of the exposure levels of MPs in human body, and may help build a bridge between the monitoring studies and the toxicology field.

Research status and prospects of microplastic pollution in lakes

As an emerging pollutant, microplastics have attracted widespread concern around the world. Research on microplastics was first conducted in oceans, and in recent years, inland water, especially lakes, has gradually become a hot spot. This paper systematically reviews the sampling, separation, purification, and identification technologies used to assess microplastics in lakes and summarizes the occurrence of lake microplastics worldwide. The results show that microplastics are widespread in lake water and sediment. There are obvious geographical differences in the occurrence of microplastics. The abundance of microplastics in different lakes varies greatly. The forms are mostly fibrous and fragments, and the main polymers are polypropylene (PP) and polyethylene (PE). Previous papers have failed to comment in as much detail on the microplastic sampling techniques employed within lake systems. The sampling and analysis methods are critical to accurately evaluating contamination results. Due to the widespread presence of microplastics and the lack of uniform standards, there are various sampling methods. Trawls and grabs are most widely used in the sampling of lake water bodies and sediment, and sodium chloride and hydrogen peroxide are the most widely used media for flotation and digestion, respectively. In the future, it will be critical to establish unified standards for lake microplastic sampling and analysis technology, further explore the migration mechanism of microplastics in lake systems, and pay attention to the impact of microplastics on lake ecosystems.

Phytotoxic Effects of Polystyrene and Polymethyl Methacrylate Microplastics on Allium cepa Roots

Plastic contamination has become one of the most pressing environmental issues due to rapidly increasing production of disposable plastic products, their fragmentation into smaller pieces, and long persistence in the environment, which affects all living organisms, including plants. In this study, Allium cepa roots were exposed to 0.01, 0.1, and 1 g L^-1 of commercial polystyrene (PS-MPs) and polymethyl methacrylate microparticles (PMMA-MPs) for 72 h. Dynamic light scattering (DLS) analyses showed high stability of both types of MPs in ultrapure water used for A. cepa treatment. Morphometric analysis revealed no significant change in root length compared to control. Pyrolysis hyphenated to gas chromatography and mass spectrometry (Py-GC-MS) has proven PS-MPs uptake by onion roots in all treatments, while PMMA-MPs were recorded only upon exposure to the highest concentration. Neither MPs induced any (cyto)toxic effect on root growth and PMMA-MPs even had a stimulating effect on root growth. ROS production as well as lipid and protein oxidation were somewhat higher in PS-MP treatments compared to the corresponding concentrations of PMMA-MP, while neither of the applied MPs induced significant damage to the DNA molecule assayed with a Comet test. Significantly elevated activity of H₂O₂ scavenging enzymes, catalase, and peroxidases was measured after exposure to both types of MPs. Obtained results suggest that onion roots take up PS-MPs more readily in comparison to PMMA-MPs, while both types of MPs induce a successful activation of antioxidant machinery in root cells that prevented the occurrence of toxic effects.

Toxicity of nanoplastics to aquatic organisms: Genotoxicity, cytotoxicity, individual level and beyond individual level

Due to the small size, high mobility and large surface area, nanoplastics (NPs) showed high potential risks to aquatic organisms. This paper reviews the toxicity of NPs to aquatic organism at various trophic levels including bacteria, plankton (algae), zooplankton, benthos, and nekton (fish). The effects at individual level caused by NPs were explained and proved by cytotoxicity and genotoxicity, and the toxicity of NPs beyond individual level was also illustrated. The toxicity of NPs is determined by the size, dosage, and surface property of NPs, as well as environmental factors, the presence of co-contaminants and the sensitivity of tested organisms. Furthermore, the joint effects of NPs with other commonly detected pollutants such as organic pollutants, metals, and nanoparticles etc. were summarized. In order to reflect the toxicity of NPs in the real natural environment, studies on toxicity assessment of NPs with the coexistence of various environmental factors and contaminants, particularly under the concentrations in natural environment are suggested.