Characterization and potential applications of nanostructured aqueous dispersions

Cubosomes as Delivery System to Repositioning Nitrofurantoin in Breast Cancer Management

Purpose

Nitrofurantoin (NITRO), a long-standing antibiotic to treat urinary tract infections, is activated by Nitro reductases. This activation mechanism has led to its exploration for repositioning applications in controlling and treating breast cancer, which express a Nitro reductase gene.

Methods

NITRO Cubosomes were developed using hot homogenization according to 23-full factorial design. The factors studied included the ratio of drug to oily phase (1:10 and 2:10), the ratio of oily to aqueous phase (1:10 and 1:5), and the ratio of Glyceryl mono-oleate (GMO) to Poloxamer 407 (PX407) (0.25:1 and 0.5:1). A total of 8 systems were proposed and evaluated by measuring particle size, zeta potential, polydispersity index, and percentage of entrapment efficiency.

Results

S6 (1:10 drug: oily phase, 1:5 oily: aqueous phase and 0.5:1 GMO: PX407) with particle size 45.5 ±c1.1 nm and an entrapment efficiency of 98.6 ± 1.8% exhibited highest desirability and was selected for further analysis. The morphology of S6 was examined using TEM microscopy. The activation of NITRO from S6 reflected on intracellular viability of MCF-7 breast cancer cell line was investigated by an MTT assay. The findings indicated that S6 had the lowest IC50 value (83.99 ± 0.15 μg g/mL) compared to Free NITRO (174.54 ± 1.36 μg g/mL), suggesting enhanced efficacy compared to free NITRO.

Conclusion

Nitrofurantoin cubosomes can be candidates for repositioning in breast cancer management after encouraging further stability and in-vivo studies.

Deep Eutectic Solvents for Essential-Oil Delivery and Bacterial-Infected Wound Healing

Essential oils (EOs) are volatile secondary metabolites of natural plants with multitudinous pharmacological activities. However, limited by their properties, such as low solubility, high volatility, photothermal instability, irritation, release, etc., EOs encounter significant challenges in pharmaceutical applications. Deep eutectic solvents (DESs) have been developed for the transdermal delivery of biomolecules and lipid-soluble drugs. Herein, a series of DES carriers were synthesized to improve the undesirable properties of EOs. We first optimized the DESs according to solubilization and aqueous dispersity using Chimonanthus nitens Oliv. EO (COEO) as a model EO. Then, the EO-DES formulations were diluted to prepare optimal aqueous EO-DES nanoformulations (AqEDs). Mechanically, hydrogen bonding allowed the DES to dissolve the complex components in EOs; meanwhile, the interaction forces, such as π-π stacking and hydrogen bonding, drove the EO-DES to assemble into nanostructures in aqueous conditions, forming AqEDs. Lastly, a case study demonstrated that clove EO-AqEDscould effectively promote methicillin-resistant Staphylococcus aureus-infected wound healing in vivo, along with biocompatibility. This AqED strategy provides a generalized platform for solubilizing EOs and improving their transdermal/topical delivery.

Self-Nanoemulsifying/ Self-Assembled Cubic Nanoparticles Lyophilized Tablet: A Novel Biphasic Release Approach to Enhance the Bioavailability of a Lipophilic Drug

This study aimed to prepare a combined self-nanoemulsifying and self-assembled cubic nanoparticles (SNE/SAC) lyophilized tablet eliciting biphasic release pattern escorted with enhanced bioavailability for drugs hampered with slow dissolution and poor absorption. The antimuscarinic Darifenacin hydrobromide (DRF) was selected as a model drug used to treat overactive bladder-associated nocturia. The DRF-SNE/SAC lyophilized tablet was prepared so that upon reconstitution a mixture of DRF-loaded cubic nanoparticles and nanoemulsion dispersion is obtained. The nanoemulsion portion is responsible for the fast release followed by controlled release of the remaining dose loaded in cubic nanoparticles. A comparative pharmacokinetic study adopting randomized crossover design in male albino rabbits versus marketed product Frequefenacine® tablet was performed. Half of the dose (52.05% ± 4.21%) was rapidly released in the first 4 h followed by sustained release of the remaining drug where (90.16% ± 8.85%) was released in 24 h. The tested system showed 2.45 folds higher % relative bioavailability and 1.57 folds higher Cmax with 1.62 longer residence time relative to reference product. The results endow the ability of the developed DRF-SNE/SAC lyophilized tablet to be considered as a propitious approach for the treatment of overactive bladder-associated nocturia without midnight dose administration.

Antibacterial and anti-biofilm activities of antibiotic-free phosphatidylglycerol/docosahexaenoic acid lamellar and non-lamellar liquid crystalline nanoparticles

Infectious diseases, particularly those associated with biofilms, are challenging to treat due to an increased tolerance to commonly used antibiotics. This underscores the urgent need for innovative antimicrobial strategies. Here, we present an alternative simple-by-design approach focusing on the development of biocompatible and antibiotic-free nanocarriers from docosahexaenoic acid (DHA) that has the potential to combat microbial infections and phosphatidylglycerol (DOPG), which is attractive for use as a biocompatible prominent amphiphilic component of Gram-positive bacterial cell membranes. We assessed the anti-bacterial and anti-biofilm activities of these nanoformulations (hexosomes and vesicles) against S. aureus and S. epidermidis, which are the most common causes of infections on catheters and medical devices by different methods (including resazurin assay, time-kill assay, and confocal laser scanning microscopy on an in vitro catheter biofilm model). In a DHA-concentration-dependent manner, these nano-self-assemblies demonstrated strong anti-bacterial and anti-biofilm activities, particularly against S. aureus. A five-fold reduction of the planktonic and a four-fold reduction of biofilm populations of S. aureus were observed after treatment with hexosomes. The nanoparticles had a bacteriostatic effect against S. epidermidis planktonic cells but no anti-biofilm activity was detected. We discuss the findings in terms of nanoparticle-bacterial cell interactions, plausible alterations in the phospholipid membrane composition, and potential penetration of DHA into these membranes, leading to changes in their structural and biophysical properties. The implications for the future development of biocompatible nanocarriers for the delivery of DHA alone or in combination with other anti-bacterial agents are discussed, as novel treatment strategies of Gram-positive infections, including biofilm-associated infections.

Lipid-based nanosystems for wound healing

INTRODUCTION

Wounds, resulting from traumas, surgery, burns or diabetes, are important medical problems due to the complexity of wound healing process regarding healing times and healthcare costs. Nanosystems have emerged as promising candidates in this field thank to their properties and versatile applications in drugs delivery.

AREAS COVERED

Lipid-based nanosystems (LBN) are described for wound treatment, highlighting their different behaviors when interacting with the cutaneous tissue. The role of nanosystems in delivering mostly natural compounds on skin as well as the technological and engineering strategies to increase their efficiency in wound healing effect are reviewed. Finally, in vitro, ex-vivo and in vivo studies are reported.

EXPERT OPINION

LBN have shown promise in addressing the challenges of wound healing as they can improve the stability of drugs used in wound therapy, leading to higher efficacy and fewer adverse effects as compared to traditional formulations. LBNs being involved in the inflammatory and proliferation stages of the wound healing process, enable the modification of wound healing through multiple ways. In addition, the use of new technologies, including 3D bioprinting and photobiomodulation, may lead to potential breakthroughs in wound healing. This would provide clinicians with more potent forms of therapy for wound healing.

Liposomes to Cubosomes: The Evolution of Lipidic Nanocarriers and Their Cutting-Edge Biomedical Applications

Lipidic nanoparticles have undergone extensive research toward the exploration of their diverse therapeutic applications. Although several liposomal formulations are in the clinic (e.g., DOXIL) for cancer therapy, there are many challenges associated with traditional liposomes. To address these issues, modifications in liposomal structure and further functionalization are desirable, leading to the emergence of solid lipid nanoparticles and the more recent liquid lipid nanoparticles. In this context, "cubosomes", third-generation lipidic nanocarriers, have attracted significant attention due to their numerous advantages, including their porous structure, structural adaptability, high encapsulation efficiency resulting from their extensive internal surface area, enhanced stability, and biocompatibility. Cubosomes offer the potential for both enhanced cellular uptake and controlled release of encapsulated payloads. Beyond cancer therapy, cubosomes have demonstrated effectiveness in wound healing, antibacterial treatments, and various dermatological applications. In this review, the authors provide an overview of the evolution of lipidic nanocarriers, spanning from conventional liposomes to solid lipid nanoparticles, with a special emphasis on the development and application of cubosomes. Additionally, it delves into recent applications and preclinical trials associated with cubosome formulations, which could be of significant interest to readers from backgrounds in nanomedicine and clinicians.

Revolutionizing transdermal drug delivery: unveiling the potential of cubosomes and ethosomes

The area of drug delivery systems has witnessed significant advancements in recent years, with a particular focus on improving efficacy, stability, and patient compliance. Transdermal drug delivery offers numerous benefits compared to conventional methods of drug administration through the skin. It helps in avoiding gastric irritation, hepatic first-pass metabolism, and gastric degradation of the drug. It bypasses the gastrointestinal tract, eliminating the risk of first-pass metabolism and allowing drugs to be administered without being affected by pH, enzymes, or intestinal bacteria. Additionally, it allows for sustained release of the drug, is noninvasive, and enhances patient adherence to the treatment regimen. The transdermal drug delivery system (TDDS) can serve as an alternative route for drug administration in individuals who cannot tolerate oral medications, experience nausea, or are unconscious. When compared to intravenous, hypodermic, and other parenteral routes, TDDS stands out due to its ability to eliminate pain, reduce the risk of infection, and prevent disease transmission associated with needle reuse. Consequently, the overall patient compliance is significantly improved with the utilization of TDDS. Among the noteworthy developments are cubosomes and ethosomes, two distinct yet promising carriers that have garnered attention for their unique properties. In conclusion, this review synthesizes the current knowledge on cubosomes and ethosomes, shedding light on their individual strengths and potential synergies. The exploration of their application in various therapeutic areas underscores their versatility and establishes them as key players in the evolving landscape of drug delivery systems.

Swelling kinetics of mixtures of soybean phosphatidylcholine and glycerol dioleate

Lipid-based drug delivery systems offer the potential to enhance bioavailability, reduce dosing frequency, and improve patient adherence. In aqueous environment, initially dry lipid depots take up water and form liquid crystalline phases. Variation of lipid composition, depot size and hydration-induced phase transitions will plausibly affect the diffusion in and out of the depot. Lipid depots of soybean phosphatidylcholine (SPC) and glycerol dioleate (GDO) mixtures were hydrated for varying time durations in a phosphate-buffered saline (PBS) buffer and then analyzed with Karl Fischer titration, magnetic resonance imaging (MRI) and gravimetrically. Mathematical modeling of the swelling process using diffusion equations, was used to estimate the parameters of diffusion. Both composition of lipid mixture and depot size affect swelling kinetics… The diffusion parameters obtained in Karl Fischer titration and MRI (with temporal and spatial resolution respectively) are in good agreement. Remarkably, the MRI results show a gradient of water content within the depot even after the end of diffusion process. Apparently contradicting the first Fick's law in its classical form, these results find an explanation using the generalized Fick's law that considers the gradient of chemical potential rather than concentration as the driving force of diffusion.

A comprehensive review on lipid nanocarrier systems for cancer treatment: fabrication, future prospects and clinical trials

Over the last few decades, cancer has been considered a clinical challenge, being among the leading causes of mortality all over the world. Although many treatment approaches have been developed for cancer, chemotherapy is still the most utilized in the clinical setting. However, the available chemotherapeutics-based treatments have several caveats including their lack of specificity, adverse effects as well as cancer relapse and metastasis which mainly explains the low survival rate of patients. Lipid nanoparticles (LNPs) have been utilized as promising nanocarrier systems for chemotherapeutics to overcome the challenges of the currently applied therapeutic strategies for cancer treatment. Loading chemotherapeutic agent(s) into LNPs improves drug delivery at different aspects including specific targeting of tumours, and enhancing the bioavailability of drugs at the tumour site through selective release of their payload, thus reducing their undesired side effects on healthy cells. This review article delineates an overview of the clinical challenges in many cancer treatments as well as depicts the role of LNPs in achieving optimal therapeutic outcomes. Moreover, the review contains a comprehensive description of the many LNPs categories used as nanocarriers in cancer treatment to date, as well as the potential of LNPs for future applications in other areas of medicine and research.

Hesperidin-loaded cubogel as a novel therapeutic armamentarium for full-thickness wound healing

Wounds are a physical manifestation of injury to the skin causing it to rupture or tear. The process of wound healing naturally restores skin integrity while minimizing the extent of the damage. Hesperidin (HPN) is a natural polyphenolic flavonoid and is effective in treating wounds due to its ability to reduce inflammation and stimulate angiogenesis. However, its use is limited by its poor physicochemical attributes such as poor solubility in water. Recently, nanoparticles, particularly Cubosomes, are found to be promising candidates for advancing wound-healing therapies, owing to their unique properties. The present study was conducted to develop a hydrogel system based on Cubosomes encapsulating HPN (HPN-Cubogel), with the potential to mitigate full-thickness wounds. The therapeutic efficacy of the formulation assessed in the animal model showed that the HPN-Cubogel formulation group exhibited a wound closure rate of 98.96 ± 1.50% after 14 days post-wounding compared to 89.12 ± 2.6% in the control group suggesting superior wound contraction activity. Collagen synthesis was superior in the formulation compared to the control group, as determined through MT staining. In summary, the HPN-Cubogel formulation was found to be the most effective in enhancing full-thickness wound healing.

Ejected microcrystals probe jammed states of droplets in cyclodextrin-based emulsions

The cyclodextrin (CD)-based emulsions exhibit complex instability behaviors such as rapid flocculation and creaming, and how to capture droplet dispersion states of the emulsions remains a great challenge. Here we prepare the CD-based emulsions with different oil-water volume ratios and CD concentrations by using high-pressure homogenization, and characterize the emulsion droplets by using optical microscopy and confocal laser scanning microscopy. We evaluate the effects of homogenization pressure on the stability of the emulsions, identify armored droplets with different surface features, measure interfacial concentrations of adsorbed ICs microcrystals, and observe ejection of the oil/CD inclusion complexes (ICs) microcrystals from the droplet surface. The droplet dispersion states are sensitive to the dynamic buildup and evolving morphologies of the interfacial microcrystals, and there are clear correlations between the properties of the ejected microcrystals and the characteristics of the emulsions. We ascribe the subsequent ejection of ICs microcrystals from the droplet surface to consolidation and deformation of the films formed between neighboring droplets. The ejection of the ICs microcrystals affords a simple method to detect the droplet-droplet interactions and phase transitions in the CD-based emulsions, which might be a generic feature in the broader context of the creaming processes of emulsions.

The influence of mannose-based esters on the mesophase behaviour of lyotropic liquid crystalline nanosystems as drug delivery vectors

Lyotropic Liquid Crystalline (LLC) nanoparticles represent an emerging class of smart, biocompatible, and biodegradable systems for the delivery of drugs. Among these, structures with complex 3D architectures such as cubosomes are of particular interest. These are non- lamellar assemblies having hydrophobic and hydrophilic portions able to carry drugs of different nature. They can further be modulated including suitable additives to control the release of the active payload, and to promote an active targeting. Starting from monoolein (GMO) cubic phase, different concentrations of mannose-based esters were added, and the eventual structural modifications were monitored to ascertain the effects of the presence of glycolipids. Moreover, the structural properties of these nanosystems loaded with Dexamethasone (DEX), a very well-known anti-inflammatory steroid, were also studied. Experiments were carried out by synchrotron Small Angle X-ray Scattering (SAXS), Raman Microspectroscopy (RMS) and Attenuated Total Reflectance-Fourier Transform Infrared (ATR-FTIR) measurements. The drug delivery potential (i.e. entrapment efficiency and release properties) of the obtained nanoparticles was evaluated. Finally, in vitro cytocompatibility and anti-inflammatory activity studies of the prepared formulations were carried out. Inclusion of mannose-based surfactants up to 10 mol% influenced the structural parameters of Im3m cubic phase and swollen cubic phases were obtained with the different glycolipids with lattice parameters significantly higher than GMO. A complete cytocompatibility and an increased DEX activity were observed, thus suggesting the possibility to use GMO/glycolipids nanoparticles to formulate innovative drug delivery systems.

Phase behavior of soybean phosphatidylcholine and glycerol dioleate in hydrated and dehydrated states studied by small-angle X-ray scattering

Soybean phosphatidylcholine (SPC) and glycerol dioleate (GDO) form liquid crystal nanostructures in aqueous environments, and their mixtures can effectively encapsulate active pharmaceutical ingredients (API). When used in a subcutaneous environment, the liquid crystalline matrix gradually hydrates and degrades in the tissue whilst slowly releasing the API. Hydration dependent SPC/GDO phase behavior is complex, non-trivial, and still not fully understood. A deeper understanding of this system is important for controlling its function in drug delivery applications. The phase behavior of the mixture of SPC/GDO/water was studied as a function of hydration and lipid ratio. Small-angle X-ray scattering (SAXS) was used to identify space groups in liquid crystalline phases and to get detailed structural information on the isotropic reverse micellar phase. The reported pseudo ternary phase diagram includes eight different phases and numerous multiphase regions in a thermodynamically consistent way. For mixtures with SPC as the predominant component, the system presents a reverse hexagonal, lamellar and R3m phase. For mixtures with lower SPC concentrations, reverse cubic (Fd3m and Pm3n) as well as intermediate and isotropic micellar phases were identified. By modeling the SAXS data using a core-shell approach, the properties of the isotropic micellar phase were studied in detail as a function of concentration. Moreover, SAXS analysis of other phases revealed new structural features in relation to lipid-water interactions. The new improved ternary phase diagram offers valuable insight into the complex phase behavior of the SPC/GDO system. The detailed structural information is important for understanding what APIs can be incorporated in the liquid crystal structure.

Lipid Nanoparticles: An Effective Tool to Improve the Bioavailability of Nutraceuticals

Nano-range bioactive colloidal carrier systems are envisaged to overcome the challenges associated with treatments of numerous diseases. Lipid nanoparticles (LNPs), one of the extensively investigated drug delivery systems, not only improve pharmacokinetic parameters, transportation, and chemical stability of encapsulated compounds but also provide efficient targeting and reduce the risk of toxicity. Over the last decades, nature-derived polyphenols, vitamins, antioxidants, dietary supplements, and herbs have received more attention due to their remarkable biological and pharmacological health and medical benefits. However, their poor aqueous solubility, compromised stability, insufficient absorption, and accelerated elimination impede research in the nutraceutical sector. Owing to the possibilities offered by various LNPs, their ability to accommodate both hydrophilic and hydrophobic molecules and the availability of various preparation methods suitable for sensitive molecules, loading natural fragile molecules into LNPs offers a promising solution. The primary objective of this work is to explore the synergy between nature and nanotechnology, encompassing a wide range of research aimed at encapsulating natural therapeutic molecules within LNPs.

Preparation of Cubosomes with Improved Colloidal and Structural Stability Using a Gemini Surfactant

Cubosomes are nanoparticles with bicontinuous cubic internal nanostructures that have been considered for use in drug delivery systems (DDS). However, their low structural stability is a crucial concern for medical applications. Herein, we investigated the use of a gemini surfactant, sodium dilauramidoglutamide lysine (DLGL), which is composed of two monomeric surfactants linked with a spacer to improve the structural stability of cubosomes prepared with phytantriol (PHY). Uniform nanosuspensions comprising a specific mixing ratio of DLGL and PHY in water prepared via ultrasonication were confirmed by using dynamic light scattering. Small-angle X-ray scattering and cryo-transmission electron microscopy revealed the formation of Pn3̅m cubosomes in a range of DLGL/PHY solid ratios between 1 and 3% w/w. By contrast, cubosome formation was not observed at DLGL/PHY solid ratios of 5% w/w or higher, suggesting that excess DLGL interfered with cubosome formation and caused them to transform into small unilamellar vesicles. The addition of phosphate-buffered saline to the nanosuspension caused aggregation when the solid ratio of DLGL/PHY was less than 5% w/w. However, Im3̅m cubosomes were obtained at solid ratios of DLGL/PHY of 6, 7.5, and 10% w/w. The lattice parameters of the Pn3̅m and Im3̅m cubosomes were approximately 7 and 11-13 nm, respectively. The lattice parameters of Im3̅m cubosomes were affected by the concentration of DLGL. Pn3̅m cubosomes were surprisingly stable for 4 weeks at both 25 and 5 °C. In conclusion, DLGL, a gemini surfactant, was found to act as a new stabilizer for PHY cubosomes at specific concentrations. Cubosomes composed of DLGL are stable under low-temperature storage conditions, such as in refrigerators, making them a viable option for heat-sensitive DDS.

A short review on the applicability and use of cubosomes as nanocarriers

Abstract

Cubosomes are nanostructured lipid-based particles that have gained significant attention in the field of drug delivery and nanomedicine. These unique structures consist of a three-dimensional cubic lattice formed by the self-assembly of lipid molecules. The lipids used to construct cubosomes are typically nonionic surfactants, such as monoolein, which possess both hydrophilic and hydrophobic regions, allowing them to form stable, water-dispersible nanoparticles. One of the key advantages of cubosomes is their ability to encapsulate and deliver hydrophobic as well as hydrophilic drugs. The hydrophobic regions of the lipid bilayers provide an ideal environment for incorporating lipophilic drugs, while the hydrophilic regions can encapsulate water-soluble drugs. This versatility makes cubosomes suitable for delivering a wide range of therapeutic agents, including small molecules, proteins, peptides, and nucleic acids. The unique structure of cubosomes also offers stability and controlled release benefits. The lipid bilayers provide a protective barrier, shielding the encapsulated drugs from degradation and improving their stability. Moreover, the cubic lattice arrangement enables the modulation of drug release kinetics by varying the lipid composition and surface modifications. This allows for the development of sustained or triggered drug release systems, enhancing therapeutic efficacy and reducing side effects. Furthermore, cubosomes can be easily modified with targeting ligands or surface modifications to achieve site-specific drug delivery, enhancing therapeutic selectivity and reducing off-target effects. In conclusion, cubosomes offer a versatile and promising platform for the delivery of therapeutic agents. In this manuscript, we will highlight some of these applications.

Graphical abstract

Lipid-Based Nanosystems for the Topical Application of Ferulic Acid: A Comparative Study

In this study, we examined and compared two different lipid-based nanosystems (LBNs), namely Transferosomes (TFs) and Monoolein Aqueous Dispersions (MADs), as delivery systems for the topical application of Ferulic Acid (FA), an antioxidant molecule derived from natural sources. Our results, as demonstrated through Franz-cell experiments, indicate that the LBNs produced with poloxamer 188 in their composition create a multilamellar system. This system effectively controls the release of the drug. Nonetheless, we found that the type of non-ionic surfactant can impact the drug release rate. Regarding FA diffusion from the MAD, this showed a lower diffusion rate compared with the TF. In terms of an in vivo application, patch tests revealed that all LBN formulations tested were safe when applied under occlusive conditions for 48 h. Additionally, human skin biopsies were used to determine whether FA-containing formulations could influence skin tissue morphology or provide protection against O₃ exposure. Analyses suggest that treatment with TFs composed of poloxamer 188 and MAD formulations might protect against structural skin damage (as observed in hematoxylin/eosin staining) and the development of an oxidative environment (as indicated by 4-hyroxinonenal (4HNE) expression levels) induced by O₃ exposure. In contrast, formulations without the active ingredient did not offer protection against the detrimental effects of O₃ exposure.Inizio modulo.

Lipid-based liquid crystalline materials in electrochemical sensing and nanocarrier technology

Some biologically active substances are unstable and poorly soluble in aqueous media, at the same time exhibiting low bioavailability. The incorporation of these biologically active compounds into the structure of a lipid-based lyotropic liquid crystalline phase or nanoparticles can increase or improve their stability and transport properties, subsequent bioavailability, and applicability in general. The aim of this short overview is (1) to clarify the principle of self-assembly of lipidic amphiphilic molecules in an aqueous environment and (2) to present lipidic bicontinuous cubic and hexagonal phases and their current biosensing (with a focus on electrochemical protocols) and biomedical applications.

Characterizing the Self-Assembly Properties of Monoolein Lipid Isosteres

Living cells feature lipid compartments which exhibit a variety of shapes and structures that assist essential cellular processes. Many natural cell compartments frequently adopt convoluted nonlamellar lipid architectures that facilitate specific biological reactions. Improved methods for controlling the structural organization of artificial model membranes would facilitate investigations into how membrane morphology affects biological functions. Monoolein (MO) is a single-chain amphiphile which forms nonlamellar lipid phases in aqueous solution and has wide applications in nanomaterial development, the food industry, drug delivery, and protein crystallization. However, even if MO has been extensively studied, simple isosteres of MO, while readily accessible, have seen limited characterization. An improved understanding of how relatively minor changes in lipid chemical structure affect self-assembly and membrane topology could instruct the construction of artificial cells and organelles for modeling biological structures and facilitate nanomaterial-based applications. Here, we investigate the differences in self-assembly and large-scale organization between MO and two MO lipid isosteres. We show that replacing the ester linkage between the hydrophilic headgroup and hydrophobic hydrocarbon chain with a thioesther or amide functional group results in the assembly of lipid structures with different phases not resembling those formed by MO. Using light and cryo-electron microscopy, small-angle X-ray scattering, and infrared spectroscopy, we demonstrate differences in the molecular ordering and large-scale architectures of the self-assembled structures made from MO and its isosteric analogues. These results improve our understanding of the molecular underpinnings of lipid mesophase assembly and may facilitate the development of MO-based materials for biomedicine and as model lipid compartments.

Lipid-Polymer Hybrid Nanocarriers for Oral Delivery of Felodipine: Formulation, Characterization and Ex Vivo Evaluation

Purpose: Felodipine, is a calcium-channel antagonist used for hypertension and angina pectoris. It is practically insoluble in aqueous media and shows low oral bioavailability (15%-20%). This investigation aims to prepare and characterize oral felodipine lipid-polymer hybrid nanocarriers (LPHNs) to increase solubility and control delivery for increasing bioavailability and enhance patient compliance. Methods: The newly microwave-based method was prepared with felodipine LPHNs (H1-H35) successfully. The (H1-H35) were subjected to thermodynamic stability experiments. After that, select nine felodipine LPHNs (F1-F9) that have smart physical stability for further optimization of different characterization processes. Results: The felodipine LPHNs (F4) are considered the most optimized formula. It was characterized by lower particle size (33.3 nm), lower PDI (0.314), high zeta potential (13.6 mV), entrapment efficiency is (81.645% w/w), drug loading is (16.329% w/w), the pH value is 4, excellent percent of light transmittance (95.5%), pseudoplastic rheogram, significantly high (P < 0.05) dissolution rate with sustained drug delivery and success ex-vivo intestinal permeation attributes. The (F4) subject for further investigations of Fourier transformed infrared spectroscopy (FTIR), atomic force microscopy (AFM), and transmission electron microscopy (TEM). The results of FTIR, AFM, and TEM indicate there is no interaction between the felodipine and excipients and that the particulate system in the nanoscale dispersion system confirms the high stability. Conclusion: The optimized felodipine LPHNs (F1-F9) formulations were smart formulations for sustained oral delivery of felodipine and that F4 was the most optimized formula according to its characterization processes.

Short-Chain Mono-Alkyl β-D-Glucoside Crystals—Do They Form a Cubic Crystal Structure?

Three-dimensional liquid crystal (LC) phases, cubic LC phases, have been extensively studied as fascinating molecular assembled systems formed by amphiphilic compounds. However, similar structures have only been seen in rare instances in lipid crystal states in glycolipid crystal studies. In this study, we prepared short-chain n-alkyl β-D-glucosides (CnG) with an alkyl chain length n ranging from 4 to 6 and investigated their crystal structures. First, differential thermal analysis (DTA) and thermogravimetric analysis (TG) measurements showed the formation of hydrated crystals for C4G and C5G, respectively. Second, the crystal structures of CnG (n = 4, 5, 6) in both anhydrous and hydrated states were examined using a temperature-controlled powder X-ray diffraction (PXRD) measurement. Both hydrate and anhydrous crystals of C4G and C5G with critical packing parameters (CPPs) less than 0.33 formed cubic crystal phases. Bilayer lengths, calculated from the main diffraction peaks in each PXRD profile, depended on crystalline moisture for C5G, but no significant change was confirmed for C4G, indicating that the properties of each hydrophilic layer differ. However, C6G with a CPP of 0.42 formed a crystal structure with a modulated lamellar structure similar to C7G and C8G with similar CPP values. Thus, a glycolipid motif concept with a cubic crystal structure was demonstrated.

Droplet Dispersion States of Cyclodextrin-Based Emulsions from Nonlinear Rheological Properties

Polymers are desirable to improve emulsion stability by stuffing them into the continuous phase. How to get information on the droplet dispersion states of the emulsions remains a challenge, as the emulsion characteristics are dictated by two intertwining components, the polymer matrix and the droplets. Herein, we use an amphiphilic polymer, gum arabic (GA), to mediate the droplet flocculation of cyclodextrin (CD)-based emulsions and compare them with our previous studies on the stabilization of CD-based emulsions by a nonamphiphilic polymer, methylcellulose (MC). We characterize the emulsions by using optical microscopy, confocal laser scanning microscopy, and laser particle analysis, explore their rheological behavior through large-amplitude oscillatory shear experiments, and analyze the nonlinear viscoelasticities through Fourier transform (FT)-rheology and Lissajous-Bowditch plots. There is a great difference between GA and MC in the viscosity effect and the arrangement around emulsion droplets. GA is not an effective flocculation inhibitor due to a bridging flocculation mechanism rather than a direct viscosity effect. Our analysis highlights the role of the intrinsic nonlinearity parameter (Q₀) extracted by FT analysis in reflecting the droplet dispersion states of the emulsions by decoupling structural contributions from the polymers and the emulsion droplets.

Antioxidant-containing monoolein aqueous dispersions: a preliminary study

The present study describes a preliminary study on the use of monoolein aqueous dispersions (MADs) as delivery systems for antioxidant molecules, namely, ascorbyl palmitate (AP) and alpha-tocopherol (AT). MAD, produced by emulsifying monoolein (4.5% w/w) in water and poloxamer 407 (0.5% w/w) as emulsifier, was characterized in terms of size, morphology, and antioxidant activity by mean of PCS, cryo-TEM, and (2,2-diphenyl-1-picrylhydrazyl) assay. MAD-AP or MAD-AT gave rise to a bimodal size distribution with mean size around 200 nm. All the preparations stored at 25 °C showed quite stable size at least up to 90 days. Cryo-TEM images confirmed MAD size distribution and indicated different MAD morphologies as a function of the loaded antioxidant molecule. Indeed, in the case of MAD-AP, vesicles and cubosomes with the typical inner cubic structure were observed, while vesicles and hexosomes were shown for MAD-AT. The encapsulation efficiency of both antioxidants reached more than 90% with respect to the total amount of drug used for MAD preparation. Moreover, AP and AT antioxidant activity was retained after encapsulation, and in vitro Franz cell experiments showed that the MAD enabled to better control the drug release. These preliminary results suggest that MAD formulations could be further investigated as a potential delivery system for antioxidant supplementation in dietary or cosmetic fields.

Lipid Nanoparticles─From Liposomes to mRNA Vaccine Delivery, a Landscape of Research Diversity and Advancement

Lipid nanoparticles (LNPs) have emerged across the pharmaceutical industry as promising vehicles to deliver a variety of therapeutics. Currently in the spotlight as vital components of the COVID-19 mRNA vaccines, LNPs play a key role in effectively protecting and transporting mRNA to cells. Liposomes, an early version of LNPs, are a versatile nanomedicine delivery platform. A number of liposomal drugs have been approved and applied to medical practice. Subsequent generations of lipid nanocarriers, such as solid lipid nanoparticles, nanostructured lipid carriers, and cationic lipid-nucleic acid complexes, exhibit more complex architectures and enhanced physical stabilities. With their ability to encapsulate and deliver therapeutics to specific locations within the body and to release their contents at a desired time, LNPs provide a valuable platform for treatment of a variety of diseases. Here, we present a landscape of LNP-related scientific publications, including patents and journal articles, based on analysis of the CAS Content Collection, the largest human-curated collection of published scientific knowledge. Rising trends are identified, such as nanostructured lipid carriers and solid lipid nanoparticles becoming the preferred platforms for numerous formulations. Recent advancements in LNP formulations as drug delivery platforms, such as antitumor and nucleic acid therapeutics and vaccine delivery systems, are discussed. Challenges and growth opportunities are also evaluated in other areas, such as medical imaging, cosmetics, nutrition, and agrochemicals. This report is intended to serve as a useful resource for those interested in LNP nanotechnologies, their applications, and the global research effort for their development.

Cell medium-dependent dynamic modulation of size and structural transformations of binary phospholipid/ω-3 fatty acid liquid crystalline nano-self-assemblies: Implications in interpretation of cell uptake studies

Lyotropic non-lamellar liquid crystalline (LLC) nanoparticles, with their tunable structural features and capability of loading a wide range of drugs and reporter probes, are emerging as versatile injectable nanopharmaceuticals. Secondary emulsifiers, such as Pluronic block copolymers, are commonly used for colloidal stabilization of LLC nanoparticles, but their inclusion often compromises the biological safety (e.g., poor hemocompatibility and enhanced cytotoxicity) of the formulation. Here, we introduce a library of colloidally stable, structurally tunable, and pH-responsive lamellar and non-lamellar liquid crystalline nanoparticles from binary mixtures of a phospholipid (phosphatidylglycerol) and three types of omega-3 fatty acids (ω-3 PUFAs), prepared in the absence of a secondary emulsifier and organic solvents. We study formulation size distribution, morphological heterogeneity, and the arrangement of their internal self-assembled architectures by nanoparticle tracking analysis, synchrotron small-angle X-ray scattering, and cryo-transmission electron microscopy. The results show the influence of type and concentration of ω-3 PUFAs in nanoparticle structural transitions spanning from a lamellar (L_α) phase to inverse discontinuous (micellar) cubic Fd3m and hexagonal phase (H₂) phases, respectively. We further report on cell-culture medium-dependent dynamic fluctuations in nanoparticle size, number and morphology, and simultaneously monitor uptake kinetics in two human cell lines. We discuss the role of these multiparametric biophysical transformations on nanoparticle-cell interaction kinetics and internalization mechanisms. Collectively, our findings contribute to the understanding of fundamental steps that are imperative for improved engineering of LLC nanoparticles with necessary attributes for pharmaceutical development.

Comparison of cubosomes and hexosomes for the delivery of phenytoin to the brain

The ability to formulate cubosomes and hexosomes with a single lipid by changing only the colloidal stabiliser presents a unique opportunity to directly compare the biological performance of these uniquely structured nanoparticles. This was explored here via the encapsulation and brain delivery of a model anti-seizure drug, phenytoin, in selachyl alcohol cubosomes and hexosomes. Nanoparticles were prepared with Pluronic® F127 or Tween 80® as the stabiliser and characterised. The internal nanostructure of nanoparticles shifted from hexosomes when using Pluronic® F127 as the stabiliser to cubosomes when using Tween 80® and was conserved following loading of phenytoin, with high encapsulation efficiencies (>97%) in both particle type. Cytotoxicity towards brain endothelial cells using the hCMEC/D3 line was comparable regardless of stabiliser type. Finally, in vivo brain delivery of phenytoin encapsulated in cubosomes and hexosomes after intravenous administration to rats was studied over a period of 60 min, showing cubosomes to be superior to hexosomes, both in terms of brain concentrations and brain to plasma ratio. While the role of stabiliser and/or internal nanostructure remains to be conclusively determined, this study is the first in vivo comparison of cubosomes and hexosomes for the delivery of a therapeutic drug molecule across the BBB and into the brain.

Novel Amphiphilic Block Copolymers for the Formation of Stimuli-Responsive Non-Lamellar Lipid Nanoparticles

Non-lamellar lyotropic liquid crystalline (LLC) lipid nanoparticles contain internal multidimensional nanostructures such as the inverse bicontinuous cubic and the inverse hexagonal mesophases, which can respond to external stimuli and have the potential of controlling drug release. To date, the internal LLC mesophase responsiveness of these lipid nanoparticles is largely achieved by adding ionizable small molecules to the parent lipid such as monoolein (MO), the mixture of which is then dispersed into nanoparticle suspensions by commercially available poly(ethylene oxide)-poly(propylene oxide) block copolymers. In this study, the Reversible Addition-Fragmentation chain Transfer (RAFT) technique was used to synthesize a series of novel amphiphilic block copolymers (ABCs) containing a hydrophilic poly(ethylene glycol) (PEG) block, a hydrophobic block and one or two responsive blocks, i.e., poly(4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzyl acrylate) (PTBA) and/or poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA). High throughput small angle X-ray scattering studies demonstrated that the synthesized ABCs could simultaneously stabilize a range of LLC MO nanoparticles (vesicles, cubosomes, hexosomes, inverse micelles) and provide internal particle nanostructure responsiveness to changes of hydrogen peroxide (H2O2) concentrations, pH and temperature. It was found that the novel functional ABCs can substitute for the commercial polymer stabilizer and the ionizable additive in the formation of next generation non-lamellar lipid nanoparticles. These novel formulations have the potential to control drug release in the tumor microenvironment with endogenous H2O2 and acidic pH conditions.

Continuous Microfluidic Production of Citrem-Phosphatidylcholine Nano-Self-Assemblies for Thymoquinone Delivery

Lamellar and non-lamellar liquid crystalline nanodispersions, including liposomes, cubosomes, and hexosomes are attractive platforms for drug delivery, bio-imaging, and related pharmaceutical applications. As compared to liposomes, there is a modest number of reports on the continuous production of cubosomes and hexosomes. Using a binary lipid mixture of citrem and soy phosphatidylcholine (SPC), we describe the continuous production of nanocarriers for delivering thymoquinone (TQ, a substance with various therapeutic potentials) by employing a commercial microfluidic hydrodynamic flow-focusing chip. In this study, nanoparticle tracking analysis (NTA) and synchrotron small-angle X-ray scattering (SAXS) were employed to characterize TQ-free and TQ-loaded citrem/SPC nanodispersions. Microfluidic synthesis led to formation of TQ-free and TQ-loaded nanoparticles with mean sizes around 115 and 124 nm, and NTA findings indicated comparable nanoparticle size distributions in these nanodispersions. Despite the attractiveness of the microfluidic chip for continuous production of citrem/SPC nano-self-assemblies, it was not efficient as comparable mean nanoparticle sizes were obtained on employing a batch (discontinuous) method based on low-energy emulsification method. SAXS results indicated the formation of a biphasic feature of swollen lamellar (Lα) phase in coexistence with an inverse bicontinuous cubic Pn3m phase in all continuously produced TQ-free and TQ-loaded nanodispersions. Further, a set of SAXS experiments were conducted on samples prepared using the batch method for gaining further insight into the effects of ethanol and TQ concentration on the structural features of citrem/SPC nano-self-assemblies. We discuss these effects and comment on the need to introduce efficient microfluidic platforms for producing nanocarriers for delivering TQ and other therapeutic agents.

Recent advances in drug delivery applications of cubosomes, hexosomes, and solid lipid nanoparticles

The use of lipid nanocarriers for drug delivery applications is an active research area, and a great interest has particularly been shown in the past two decades. Among different lipid nanocarriers, ISAsomes (Internally self-assembled somes or particles), including cubosomes and hexosomes, and solid lipid nanoparticles (SLNs) have unique structural features, making them attractive as nanocarriers for drug delivery. In this contribution, we focus exclusively on recent advances in formation and characterization of ISAsomes, mainly cubosomes and hexosomes, and their use as versatile nanocarriers for different drug delivery applications. Additionally, the advantages of SLNs and their application in oral and pulmonary drug delivery are discussed with focus on the biological fates of these lipid nanocarriers in vivo. Despite the demonstrated advantages in in vitro and in vivo evaluations including preclinical studies, further investigations on improved understanding of the interactions of these nanoparticles with biological fluids and tissues of the target sites is necessary for efficient designing of drug nanocarriers and exploring potential clinical applications.

Advances in microfluidic synthesis and coupling with synchrotron SAXS for continuous production and real-time structural characterization of nano-self-assemblies

Microfluidic platforms have become highly attractive tools for synthesis of nanoparticles, including lipid nano-self-assemblies, owing to unique features and at least three important aspects inherent to miniaturized micro-devices. Firstly, the fluids flow under controlled conditions in the microchannels, providing well-defined flow profiles and shorter diffusion lengths that play important roles in enhancing the continuous production of lipid and polymer nanoparticles with relatively narrow size distributions. Secondly, various geometries adapted to microfluidic device designs can be utilized for enhancing the colloidal stability of nanoparticles and improving their drug loading. Thirdly, microfluidic devices are usually compatible with in situ characterization methods for real-time monitoring of processes occurring inside the microchannels. This is unlike conventional nanoparticle synthesis methods, where a final solution or withdrawn aliquots are separately analysed. These features inherent to microfluidic devices provide a tool-set allowing not only precise nanoparticle size control, but also real-time analyses for process optimization. In this review, we focus on recent advances and developments in the use of microfluidic devices for synthesis of lipid nanoparticles. We present different designs based on hydrodynamic flow focusing, droplet-based methods and controlled microvortices, and discuss integration of microfluidic platforms with synchrotron small-angle X ray scattering (SAXS) for in situ structural characterization of lipid nano-self-assemblies under continuous flow conditions, along with major challenges and future directions in this research area.

Plasmalogen-Based Liquid Crystalline Multiphase Structures Involving Docosapentaenoyl Derivatives Inspired by Biological Cubic Membranes

Structural properties of plasmenyl-glycerophospholipids (plasmalogens) have been scarcely studied for plasmalogens with long polyunsaturated fatty acid (PUFA) chains, despite of their significance for the organization and functions of the cellular membranes. Elaboration of supramolecular assemblies involving PUFA-chain plasmalogens in nanostructured mixtures with lyotropic lipids may accelerate the development of nanomedicines for certain severe pathologies (e.g., peroxisomal disorders, cardiometabolic impairments, and neurodegenerative Alzheimer's and Parkinson's diseases). Here, we investigate the spontaneous self-assembly of bioinspired, custom-produced docosapentaenoyl (DPA) plasmenyl (ether) and ester phospholipids in aqueous environment (pH 7) by synchrotron small-angle X-ray scattering (SAXS) and cryogenic transmission electron microscopy (cryo-TEM). A coexistence of a liquid crystalline primitive cubic Im3m phase and an inverted hexagonal (H_II) phase is observed for the DPA-ethanolamine plasmalogen (C16:1p-22:5n6 PE) derivative. A double-diamond cubic Pn3m phase is formed in mixed assemblies of the phosphoethanolamine plasmalogen (C16:1p-22:5n6 PE) and monoolein (MO), whereas a coexistence of cubic and lamellar liquid crystalline phases is established for the DPA-plasmenyl phosphocholine (C16:1p-22:5n6 PC)/MO mixture at ambient temperature. The DPA-diacyl phosphoinositol (22:5n6-22:5n6 PI) ester lipid displays a propensity for a lamellar phase formation. Double membrane vesicles and multilamellar onion topologies with inhomogeneous distribution of interfacial curvature are formed upon incorporation of the phosphoethanolamine plasmalogen (C16:1p-22:5n6 PE) into dioleoylphosphocholine (DOPC) bilayers. Nanoparticulate formulations of plasmalogen-loaded cubosomes, hexosomes, and various multiphase cubosome- and hexosome-derived architectures and mixed type nano-objects (e.g., oil droplet-embedding vesicles or core-shell particles with soft corona) are produced with PUFA-chain phospholipids and lipophilic antioxidant-containing membrane compositions that are characterized by synchrotron SAXS and cryo-TEM imaging. The obtained multiphase nanostructures reflect the changes in the membrane curvature induced by the inclusion of DPA-based PE and PC plasmalogens, as well as DPA-PI ester derivative, and open new opportunities for exploration of these bioinspired nanoassemblies.

Structural Evaluation of the Choline and Geranic Acid/Water Complex by SAXS and NMR Analyses

Recently, choline and geranic acid (CAGE), an ionic liquid (IL), has been recognized to be a superior biocompatible material for oral and transdermal drug delivery systems (DDS). When CAGE is administered, CAGE would be exposed to various types of physiological fluids, such as intestinal and intradermal fluids. However, the effect of physiological fluids on the structure of CAGE remains unclear. In the present study, molecular structures of CAGE with different ratios of water were investigated using small-angle X-ray scattering (SAXS) and nuclear magnetic resonance (NMR). The SAXS pattern of CAGE showed an IL-specific broad peak derived from nanoscale aggregation until 17 vol % water. Meanwhile, narrow peaks were observed in samples with 25-50 vol % water, showing a transition to the lamellar phase. With more than 67 vol % water, CAGE was found to exist as micelles in water. The ¹H NMR spectra indicated that protons of H₂O, OH in choline (CH), and COOH in geranic acid (GA) were observed as only one peak up to 17 vol % water. This peak shifted to a high magnetic field, and the integral values increased with the water content, speculating that water is localized close to the COOH and OH groups to allow proton exchange. The ¹³C NMR spectra showed that peaks related to the carboxyl group shifted with adding water. Moreover, only GA peaks were observed in the lamellar phase through ¹³C cross-polarization magic-angle spinning NMR, suggesting that the main rigid component of the lamellar phase was GA. Taken together, this study suggested that CAGE still maintained its IL structure up to 17 vol % water, then transitioned to the lamellar phase with 25-50 vol % water, and finally changed to the micellar phase with more than 67 vol % water. This information would be useful in the formulation and development of DDS using CAGE.

Monoolein-based nanoparticles containing indinavir: a taste-masked drug delivery system

OBJECTIVE

This study developed a novel child-friendly drug delivery system for pediatric HIV treatment: a liquid, taste-masked, and solvent-free monoolein-based nanoparticles formulation containing indinavir (0.1%).

SIGNIFICANCE

Adherence to antiretroviral therapy by pediatric patients is difficult because of the lack of dosage forms adequate for children.

METHODS

Monoolein-based nanoparticles were developed. The particle size, zeta potential, pH, drug content, small angle X-ray scattering, stability, in vitro drug release profile, biocompatibility, toxicity, and taste-masking properties were evaluated.

RESULTS

Monoolein-based formulations containing indinavir had nanosized particles with 155 ± 7 nm, unimodal particle size distribution, and polydispersity index of 0.16 ± 0.03. The zeta potential was negative (-31.3 ± 0.3 mV) and pH was neutral (7.78 ± 0.01). A 96% drug incorporation efficiency was achieved, and the indinavir concentration remained constant for 30 days. Polarized light microscopy revealed isotropic characteristics. Transmission electron microscopy images showed spherical shaped morphology. Small-angle X-ray scattering displayed a form factor broad peak. Indinavir had a sustained release from the nanoparticles. The system was nonirritant and was able to mask drug bitter taste.

CONCLUSIONS

Monoolein-based nanoparticles represent a suitable therapeutic strategy for antiretroviral treatment with the potential to reduce the frequency of drug administration and promote pediatric adherence.

Rapidly dissolving microneedles for the delivery of cubosome-like liquid crystalline nanoparticles with sustained release of rapamycin

In this study, we developed a system for the transdermal delivery and controlled release of the hydrophobic immunosuppressive drug rapamycin, foreseeing an application in psoriasis treatment. To do so, rapamycin was encapsulated in phytantriol-based cubosome-like liquid crystalline nanoparticles stabilized with pluronic F127. The final mass percent composition of the lipid nanoparticles was 0.25% phytantriol, 0.1% pluronic F127, 4.75% ethanol and 94.9% water. These particles showed a rapamycin encapsulation efficiency above 95% and a sustained in vitrodrug release profile throughout 14 days. Subsequently the rapamycin-carrying particles were incorporated into rapidly dissolving microneedle patches composed of a polymeric matrix of poly(vinylpyrrolidone) and poly(vinyl alcohol). Confocal microscopy allowed to infer the preferential distribution of the cubosome-like particles at the tip and baseplate of the microneedles. The fabricated microneedles showed successful piercing and deposition of the loaded cubosome-like particles on a skin-mimicking agarose gel. Finally, the rapamycin-loaded cubosome-like particles showed antiproliferative activity in natural killer cells in vitro. The results here presented show the potential of the developed system to deliver cubosome-like particles into the skin and promote the sustained release of rapamycin in the context of immunomodulation.

Preparation and Evaluation of Cubic Nanoparticles for Improved Transdermal Delivery of Propranolol Hydrochloride

Transdermal drug delivery of propranolol hydrochloride (PRH) is promising for the treatment of infantile hemangioma (IH). Clinically used PRH hydrogel fails to reach the deep IH for complete recovery. In this study, the PRH-loaded cubic nanoparticles (CNPs) were prepared to promote the transdermal effect of PRH. A remote drug loading method was developed to prepare the PRH-CNPs. For the traditional passive drug loading method, the largest encapsulation efficiency (EE%) was around 50%. The remote drug loading was performed by increasing the pH of the mixture of blank CNPs and PRH solution. The optimal PRH-CNPs showed an EE% of 90.15 ± 2.44% at pH 8.5. The permeation of the PRH solution was poor while the PRH-CNPs showed greatly enhanced skin permeation. It was found that smaller-sized PRH-CNPs contributed to increased skin permeation and retention. In addition, the PRH-CNPs had higher cytotoxicity towards the EOMA cells when compared with the PRH solution. During storage for 1 month, the PRH-CNPs kept stable size distribution, pH, and EE%. In conclusion, results of this study suggested that the PRH-CNPs could be a potential candidate for the treatment of the IH by transdermal delivery.

A structurally diverse library of glycerol monooleate/oleic acid non-lamellar liquid crystalline nanodispersions stabilized with nonionic methoxypoly(ethylene glycol) (mPEG)-lipids showing variable complement activation properties

Pluronic F127-stabilized non-lamellar liquid crystalline aqueous nanodispersions are promising injectable platforms for drug and contrast agent delivery. These nanodispersions, however, trigger complement activation in the human blood, where the extent of complement activation and opsonization processes may compromise their biological performance and safety. Here, we introduce a broad family of nanodispersions from glycerol monooleate (GMO) and oleic acid (OA) in different weight ratios, and stabilized with a plethora of nonionic methoxypoly(ethylene glycol) (mPEG)-lipids of different PEG chain length and variable lipid moiety (monounsaturated or saturated diglycerides or D-α-tocopheryl succinate). Through an integrated biophysical approach involving dynamic light scattering, synchrotron small-angle scattering, and cryo-transmission electron microscopy, we examine the impact of nonionic mPEG-lipid stabilization on size, internal self-assembled architecture, and gross morphological characteristics of nanodispersions. The results show how the nonionic mPEG-lipid type and concentration, and dependent on GMO/OA weight ratio, can variably modulate the internal architectures of nanoparticles. Assessment of complement profiling from selected nanodispersions with diverse structural heterogeneity further suggests a variable modulatory role for the lipid type of the nonionic mPEG-lipid in the extent of complement activation, which span from no activation to moderate to high levels. We comment on plausible mechanisms driving the observed complement activation variability and discuss the potential utility of these nanodispersions for future development of injectable nanopharmaceuticals.

In situ monitoring of the formation of lipidic non-lamellar liquid crystalline depot formulations in synovial fluid

Administration of parenteral liquid crystalline phases, forming in-vivo with tunable nanostructural features and sustained release properties, offers an attractive approach for treatment of infections and local drug delivery. It has also a potential use for postoperative pain management after arthroscopic knee surgery. However, the optimal use of this drug delivery principle requires an improved understanding of the involved dynamic structural transitions after administration of low-viscous stimulus-responsive lipid precursors and their fate after direct contact with the biological environment. These precursors (preformulations) are typically based on a single biologically relevant lipid (or a lipid combination) with non-lamellar liquid crystalline phase forming propensity. In relation to liquid crystalline depot design for intra-articular drug delivery, it was our interest in the present study to shed light on such dynamic structural transitions by combining synchrotron SAXS with a remote controlled addition of synovial fluid (or buffer containing 2% (w/v) albumin). This combination allowed for monitoring in real-time the hydration-triggered dynamic structural events on exposure of the lipid precursor (organic stock solution consisting of the binary lipid mixture of monoolein and castor oil) to excess synovial fluid (or excess buffer). The synchrotron SAXS findings indicate a fast generation of inverse bicontinuous cubic phases within few seconds. The effects of (i) the organic solvent N-methyl-2-pyrolidone (NMP), (ii) the lipid composition, and (iii) the albumin content on modulating the structures of the self-assembled lipid aggregates and the implications of the experimental findings in the design of liquid crystalline depots for intra-articular drug delivery are discussed.

Natural Ergot Alkaloids in Ocular Pharmacotherapy: Known Molecules for Novel Nanoparticle-Based Delivery Systems

Several pharmacological properties are attributed to ergot alkaloids as a result of their antibacterial, antiproliferative, and antioxidant effects. Although known for their biomedical applications (e.g., for the treatment of glaucoma), most ergot alkaloids exhibit high toxicological risk and may even be lethal to humans and animals. Their pharmacological profile results from the structural similarity between lysergic acid-derived compounds and noradrenalin, dopamine, and serotonin neurotransmitters. To reduce their toxicological risk, while increasing their bioavailability, improved delivery systems were proposed. This review discusses the safety aspects of using ergot alkaloids in ocular pharmacology and proposes the development of lipid and polymeric nanoparticles for the topical administration of these drugs to enhance their therapeutic efficacy for the treatment of glaucoma.

Lipid-based mesophases as matrices for nanoscale reactions

Lipidic mesophases are versatile bioorganic materials that have been effectively employed as nanoscale matrices for membrane protein crystallization, drug delivery and as food emulsifiers over the last 30 years. In this review, the focus is upon studies that have employed non-lamellar lipid mesophases as matrices for organic, inorganic and enzymatic reactions. The ability of lipidic mesophases to incorporate hydrophilic, amphiphilic and hydrophobic molecules, together with the high interfacial area of the lipidic cubic and inverse hexagonal phases has been exploited in heterogeneous catalysis as well as for enzyme immobilization. The unique nanostructure of these mesophases is the driving force behind their ability to act as templates for synthesis, resulting in the creation of highly ordered polymeric and inorganic materials with complex geometries.

Lipid-Based Nanosystem As Intelligent Carriers for Versatile Drug Delivery Applications

:

The contemporary drug discovery research shows that most of the drug candidates are highly potent, but showing poor aqueous solubility leads a variety of challenges for formulation scientists to develop a suitable formulation to improve the systemic bioavailability of such drugs. Lipid-based nanocarriers act as a major and most projecting approach overcoming the limitations which affect several physiochemical properties of drug such as the solubility, partition coefficient and bioavailability or absorption. This also fulfills a variety of product requirements and helps to overcome several limitations as decided by symptoms of the disease, various routes of administration of drug, price concern, increasing strength of product, noxious or harmful effect of drug, and dose efficacy. The lipidic nanosystem formulates aqueous drug in lipid base and is also a commercially feasible approach for the formulation of different dosage forms meant for topical or transdermal, oral, ocular, pulmonary, and parenteral delivery. This review provides a brief on lipid-based drug delivery nanocarrier and the mechanisms by which lipids and lipidic excipients improve the oral absorption of drugs with poor aqueous solubility and also provide a viewpoint on the promising applications of lipidic nanoparticulate systems.

Micellar Fd3m cubosomes from monoolein - long chain unsaturated fatty acid mixtures: Stability on temperature and pH response

HYPOTHESIS

Control of the nanostructure of self-assembled systems may be achieved through manipulation of surfactant molecular packing and interfacial curvature. In order to phase engineer the inverse micellar cubosomes in some monoolein-fatty acid systems, lipids with wedge shaped molecular geometry were incorporated to promote the formation of this phase, that is of interest as potential sustained released nanocarriers.

EXPERIMENTS

Liquid crystalline nanoparticle dispersions of monoolein with some cis unsaturated fatty acids were prepared and their partial temperature-composition phase diagrams and structure were established using high throughput Small Angle X-ray Scattering (SAXS) and cryogenic transmission electron microscopy (cryo-TEM). The pH responsiveness of these systems was evaluated in the presence of phosphate buffered saline (PBS).

FINDINGS

The partial temperature-composition phase diagrams of five nanoparticle formulations containing monoolein and unsaturated fatty acids were established and identified the presence of micellar cubosomes in each of these systems. The results indicate that temperature, fatty acid concentration and structure, as well as pH all directly impact the formation and stability of this phase. Low energy inverse micellar cubic to emulsion phase transformations were identified in the monoolein with oleic acid and vaccenic acid systems at physiological temperatures that may be advantageous for staged therapeutic release strategies in nanomedicine.

Theranostic combinatorial drug-loaded coated cubosomes for enhanced targeting and efficacy against cancer cells

Cubosomes, a product of nanobioengineering, are self-structured lipid nanoparticles that act like drug-loaded theranostic probes. Here, we describe a simple method for the preparation of combinatorial drug-loaded cubosomes with, proof-of-principle, therapeutic effect against cancer cells, along with diagnostic capabilities. Anticancer drugs cisplatin and paclitaxel were loaded in the cubosomes in combination. The cubosomes were coated with a layer of poly-Ɛ-lysine, which helped avoid the initial burst release of drug and allowed for a slow and sustained release for better efficacy. Cubosomes were imaged by transmission electron microscope, and their dispersion analyzed in vitro by differential scanning calorimetric and X-ray diffractogram studies. The microscopic images depicted spherical polyangular structures, which are easily distinguishable. The analyses revealed that the drug is uniformly dispersed all through the cubosomes. Further characterization was carried out by zeta-potential measurement, in vitro release, and entrapment efficiency studies. The in vitro studies established that the coating of cubosomes successfully reduced the burst release of drugs initially and confirmed a slow, sustained release over increased time. Comparative cytotoxicity of coated, uncoated, and blank cubosomes was evaluated, using human hepatoma HepG2 cell line, and the formulations were found to be entirely nontoxic, similar to the blank ones. The therapeutic efficiency of the cubosomes against HeLa cells was confirmed by the impedance measurement and fluorescent imaging. Furthermore, the reduction in impedance in cells treated with coated combinatorial cubosomes proved the impairment of HeLa cells, as confirmed by fluorescence microscopy.