Direct detection of unamplified hepatitis C virus RNA using unmodified gold nanoparticles

Nucleic acid-based electrochemical biosensors

Colorectal cancer, breast cancer, oxidative DNA damage, and viral infections are all significant and major health threats to human health, presenting substantial challenges in early diagnosis. In this regard, a wide range of nucleic acid-based electrochemical platforms have been widely employed as point-of-care diagnostics in health care and biosensing technologies. This review focuses on biosensor design strategies, underlying principles involved in the development of advanced electrochemical genosensing devices, approaches for immobilizing DNA on electrode surfaces, as well as their utility in early disease diagnosis, with a particular emphasis on cancer, leukaemia, oxidative DNA damage, and viral pathogen detection. Notably, the role of biorecognition elements and nanointerfaces employed in the design and development of advanced electrochemical genosensors for recognizing biomarkers related to colorectal cancer, breast cancer, leukaemia, oxidative DNA damage, and viral pathogens has been extensively reviewed. Finally, challenges associated with the fabrication of nucleic acid-based biosensors to achieve high sensitivity, selectivity, a wide detection range, and a low detection limit have been addressed. We believe that this review will provide valuable information for scientists and bioengineers interested in gaining a deeper understanding of the fabrication and functionality of nucleic acid-based electrochemical biosensors for biomedical diagnostic applications.

Gold Nanoparticle-Based Colorimetric Biosensing for Foodborne Pathogen Detection

Ensuring safe high-quality food is an ongoing priority, yet consumers face heightened risk from foodborne pathogens due to extended supply chains and climate change in the food industry. Nanomaterial-based assays are popular and have recently been developed to ensure food safety and high quality. This review discusses strategies for utilizing gold nanoparticles in colorimetric biosensors. The visible-signal biosensor proves to be a potent sensing technique for directly measuring targets related to foodborne pathogens in the field of food analysis. Among visible-signal biosensors, the localized surface plasmon resonance (LSPR) biosensor has garnered increasing attention and experienced rapid development in recent years. This review succinctly introduces the origin of LSPR theory, providing detailed insights into its fundamental principles. Additionally, this review delves into the application of nanotechnology for the implementation of the LSPR biosensor, exploring methods for utilizing gold nanoparticles and elucidating the factors that influence the generation of visible signals. Several emerging technologies aimed at simple and rapid immunoassays for onsite applications have been introduced in the food industry. In the foreseeable future, field-friendly colorimetric biosensors could be adopted in food monitoring systems. The onsite and real-time detection of possible contaminants and biological substances in food and water is essential to ensure human health and safety.

Conjugation of microbial-derived gold nanoparticles to different types of nucleic acids: evaluation of transfection efficiency

In this study, gold nanoparticles produced by eukaryotic cell waste (AuNP), were analyzed as a transfection tool. AuNP were produced by Fusarium oxysporum and analyzed by spectrophotometry, transmission electron microscopy (TEM), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS). Fourier transform infrared spectroscopy (FTIR) and dynamic light scattering (DLS) were used before and after conjugation with different nucleic acid (NA) types. Graphite furnace atomic absorption spectroscopy (GF-AAS) was used to determine the AuNP concentration. Conjugation was detected by electrophoresis. Confocal microscopy and quantitative real-time PCR (qPCR) were used to assess transfection. TEM, SEM, and EDS showed 25 nm AuNP with round shape. The amount of AuNP was 3.75 ± 0.2 µg/µL and FTIR proved conjugation of all NA types to AuNP. All the samples had a negative charge of - 36 to - 46 mV. Confocal microscopy confirmed internalization of the ssRNA-AuNP into eukaryotic cells and qPCR confirmed release and activity of carried RNA.

Recent Developments in Nanotechnology-Based Biosensors for the Diagnosis of Coronavirus

The major challenge in today's world is that medical research is facing the existence of a vast number of viruses and their mutations, which from time to time cause outbreaks. Also, the continuous and spontaneous mutations occurring in the viruses and the emergence of resistant virus strains have become serious medical hazards. So, in view of the growing number of diseases, like the recent COVID-19 pandemic that has caused the deaths of millions of people, there is a need to improve rapid and sensitive diagnostic strategies to initiate timely treatment for such conditions. In the cases like COVID-19, where a real cure due to erratic and ambiguous signs is not available, early intervention can be life-saving. In the biomedical and pharmaceutical industries, nanotechnology has evolved exponentially and can overcome multiple obstacles in the treatment and diagnosis of diseases. Nanotechnology has developed exponentially in the biomedical and pharmaceutical fields and can overcome numerous challenges in the treatment and diagnosis of diseases. At the nano stage, the molecular properties of materials such as gold, silver, carbon, silica, and polymers get altered and can be used for the creation of reliable and accurate diagnostic techniques. This review provides insight into numerous diagnostic approaches focused on nanoparticles that could have been established for quick and early detection of such diseases.

Strong anti-viral nano biocide based on Ag/ZnO modified by amodiaquine as an antibacterial and antiviral composite

In this paper, we synthesized Ag/ZnO composite colloidal nanoparticles and the surface of nanoparticles was improved by amodiaquine ligand. The synthesized nanoparticles were characterized using the XRD diffraction pattern, FT-IR Spectroscopy, TEM image, and UV-Vis spectroscopy. The antibacterial, antifungal, and antiviral effects of the synthesized colloid were examined on E.coli, Staphylococcus aureus, Pseudomonas aeruginosa, and Enterococcus hirae bacteria, and Candida Albicans and form spore aspergillus fungi, also influenza, herpes simplex, and covid 19 viruses. The results indicate more than 7 log removal of the bacteria, fungi, and viruses by synthesized colloid with a concentration of 15 μg/L (Ag)/50 µg/ml (ZnO). This removal for covid 19 virus is from 3.2 × 10⁸ numbers to 21 viruses within 30 s. Also, irritation and toxicity tests of the synthesized colloid show harmless effects on human cells and tissues. These colloidal nanoparticles were used as mouthwash solution and their clinical tests were done on 500 people infected by the coronavirus. The results indicate that by washing their mouth and nose three times on day all patients got healthy at different times depending on the depth of the disease. Almost all people with no signs of infection and using this solution as a mouthwash didn't infect by the virus during the study.

Genosensors as an alternative diagnostic sensing approaches for specific detection of various certain viruses: a review of common techniques and outcomes

Viral infections are responsible for the deaths of millions of people throughout the world. Since outbreak of highly contagious and mutant viruses such as contemporary sars-cov-2 pandemic, has challenged the conventional diagnostic methods, the entity of a thoroughly sensitive, specific, rapid and inexpensive detecting technique with minimum level of false-positivity or -negativity, is desperately needed more than any time in the past decades. Biosensors as minimized devices could detect viruses in simple formats. So far, various nucleic acid, immune- and protein-based biosensors were designed and tested for recognizing the genome, antigen, or protein level of viruses, respectively; however, nucleic acid-based sensing techniques, which is the foundation of constructing genosensors, are preferred not only because of their ultra-sensitivity and applicability in the early stages of infections but also for their ability to differentiate various strains of the same virus. To date, the review articles related to genosensors are just confined to particular pathogenic diseases; In this regard, the present review covers comprehensive information of the research progress of the electrochemical, optical, and surface plasmon resonance (SPR) genosensors that applied for human viruses' diseases detection and also provides a well description of viruses' clinical importance, the conventional diagnosis approaches of viruses and their disadvantages. This review would address the limitations in the current developments as well as the future challenges involved in the successful construction of sensing approaches with the functionalized nanomaterials and also allow exploring into core-research works regarding this area.

Progress, evolving therapeutic/diagnostic approaches, and challenges in the management of hepatitis C virus infections

Hepatitis C virus (HCV) infections are emerging as one of the foremost challenges in healthcare owing to its chronicity and the virus's quasispecies nature. Worldwide, over 170 million people are chronically infected with HCV, with an annual mortality of over 500,000 people across the world. The emerging pathophysiological evidence links HCV infections to a risk of developing liver diseases such as cirrhosis and hepatocellular carcinoma. Despite the great strides that have been made towards understanding the pathophysiology of disease progression, the tailored treatments of HCV infection remain to be established. The present review provides an update of the literature pertaining to evolving therapeutic approaches and prophylactic measures for the effective management of HCV infections. An extensive discussion of established and experimental immune prophylactic measures also sheds light on current developments in the design of vaccination strategies against HCV infection. We have also attempted to address the application of nanotechnology in formulating effective therapeutic interventions against HCV. Pointing out the limitations of the existing diagnostic methods and therapeutic approaches against HCV might inspire the design and development of novel, efficient, reliable, and cost-effective diagnostic technologies as well as novel therapeutic and immune prophylactic interventions for the effective management of HCV.

Response of Biological Gold Nanoparticles to Different pH Values: Is It Possible to Prepare Both Negatively and Positively Charged Nanoparticles?

The mycelium-free supernatant (MFS) of a five-day-old culture medium of Fusarium oxysporum was used to synthesize gold nanoparticles (AuNPs). The experimental design of the study was to answer the question: can this production process of AuNPs be controllable like classical chemical or physical approaches? The process of producing AuNPs from 1 mM tetrachloroauric (III) acid trihydrate in MFS was monitored visually by color change at different pH values and quantified spectroscopically. The produced AuNPs were analyzed by transmission electron microscopy, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The presence of capping agents was confirmed by Fourier transform infrared spectroscopy (FTIR). Two AuNP samples with acidic and alkaline pH were selected and adjusted with the pH gradient and analyzed. Finally, the size and zeta potential of all samples were determined. The results confirmed the presence of the proteins as capping agents on the surface of the AuNPs and confirmed the production of AuNPs at all pH values. All AuNP samples exhibited negative zeta potential, and this potential was higher at natural to alkaline pH values. The size distribution analysis showed that the size of AuNPs produced at alkaline pH was smaller than that at acidic pH. Since all samples had negative charge, we suspect that there were other molecules besides proteins that acted as capping agents on the surface of the AuNPs. We conclude that although the biological method of nanoparticle production is safe, green, and inexpensive, the ability to manipulate the nanoparticles to obtain both positive and negative charges is limited, curtailing their application in the medical field.

Gold Nanoparticles: Biosynthesis and Potential of Biomedical Application

Gold nanoparticles (AuNPs) are extremely promising objects for solving a wide range of biomedical problems. The gold nanoparticles production by biological method ("green synthesis") is eco-friendly and allows minimization of the amount of harmful chemical and toxic byproducts. This review is devoted to the AuNPs biosynthesis peculiarities using various living organisms (bacteria, fungi, algae, and plants). The participation of various biomolecules in the AuNPs synthesis and the influence of size, shapes, and capping agents on the functionalities are described. The proposed action mechanisms on target cells are highlighted. The biological activities of "green" AuNPs (antimicrobial, anticancer, antiviral, etc.) and the possibilities of their further biomedical application are also discussed.

Detection of Begomovirus in chilli and tomato plants using functionalized gold nanoparticles

Begomoviruses are a major class of Geminiviruses that affects most dicotyledonous plants and causes heavy economic losses to farmers. Early detection of begomovirus is essential to control the spread of the disease and prevent loss. Many available detection methods like ELISA, immunosorbent electron microscopy, PCR or qPCR require expertise in handling sophisticated instruments, complex data interpretation and costlier chemicals, enzymes or antibodies. Hence there is a need for a simpler detection method, here we report the development of a visual detection method based on functionalized gold nanoparticles (AuNP assay). The assay was able to detect up to 500 ag/µl of begomoviral DNA (pTZCCPp3, a clone carrying partial coat protein gene) suspended in MilliQ water. Screening of chilli plants for begomoviral infection by PCR (Deng primers) and AuNP assay showed that AuNP assay (77.7%) was better than PCR (49.4%). The AuNP assay with clccpi1 probe was able to detect begomoviral infection in chilli, tomato, common bean, green gram and black gram plants which proved the utility and versatility of the AuNP assay. The specificity of the assay was demonstrated by testing with total DNA from different plants that are not affected by begomoviruses.

The significance of bioengineered nanoplatforms against SARS-CoV-2: From detection to genome editing

COVID-19 outbreak can impose serious negative impacts on the infrastructures of societies including the healthcare systems. Despite the increasing research efforts, false positive or negative results that may be associated with serologic or even RT-PCR tests, inappropriate or variable immune response, and high rates of mutations in coronavirus may negatively affect virus detection process and effectiveness of the vaccines or drugs in development. Nanotechnology-based research attempts via developing state-of-the-art techniques such as nanomechatronics ones and advanced materials including the sensors for detecting the pathogen loads at very low concentrations or site-specific delivery of therapeutics, and real-time protections against the pandemic outbreaks by nanorobots can provide outstanding biomedical breakthroughs. Considering the unique characteristics of pathogens particularly the newly-emerged ones and avoiding the exaggerated optimism or simplistic views on the prophylactic and therapeutic approaches including the one-size-fits-all ones or presenting multiple medications that may be associated with synergistic toxicities rather than enhanced efficiencies might pave the way towards the development of more appropriate treatment strategies with reduced safety concerns. This paper highlights the significance of nanoplatforms against the viral disorders and their capabilities of genome editing that may facilitate taking more appropriate measures against SARS-CoV-2.

State-of-the-Art of Nanodiagnostics and Nanotherapeutics against SARS-CoV-2

The pandemic outbreak of SARS-CoV-2, with millions of infected patients worldwide, has severely challenged all aspects of public health. In this regard, early and rapid detection of infected cases and providing effective therapeutics against the virus are in urgent demand. Along with conventional clinical protocols, nanomaterial-based diagnostics and therapeutics hold a great potential against coronavirus disease 2019 (COVID-19). Indeed, nanoparticles with their outstanding characteristics would render additional advantages to the current approaches for rapid and accurate diagnosis and also developing prophylactic vaccines or antiviral therapeutics. In this review, besides presenting an overview of the coronaviruses and SARS-CoV-2, we discuss the introduced nanomaterial-based detection assays and devices and also antiviral formulations and vaccines for coronaviruses.

Optical Biosensors for Virus Detection: Prospects for SARS-CoV-2/COVID-19

The recent pandemic of the novel coronavirus disease 2019 (COVID-19) has caused huge worldwide disruption due to the lack of available testing locations and equipment. The use of optical techniques for viral detection has flourished in the past 15 years, providing more reliable, inexpensive, and accurate detection methods. In the current minireview, optical phenomena including fluorescence, surface plasmons, surface-enhanced Raman scattering (SERS), and colorimetry are discussed in the context of detecting virus pathogens. The sensitivity of a viral detection method can be dramatically improved by using materials that exhibit surface plasmons or SERS, but often this requires advanced instrumentation for detection. Although fluorescence and colorimetry lack high sensitivity, they show promise as point-of-care diagnostics because of their relatively less complicated instrumentation, ease of use, lower costs, and the fact that they do not require nucleic acid amplification. The advantages and disadvantages of each optical detection method are presented, and prospects for applying optical biosensors in COVID-19 detection are discussed.

On-Chip Optical Detection of Viruses: A Review

The current outbreak of the coronavirus disease-19 (COVID-19) pandemic worldwide has caused millions of fatalities and imposed a severe impact on our daily lives. Thus, the global healthcare system urgently calls for rapid, affordable, and reliable detection toolkits. Although the gold-standard nucleic acid amplification tests have been widely accepted and utilized, they are time-consuming and labor-intensive, which exceedingly hinder the mass detection in low-income populations, especially in developing countries. Recently, due to the blooming development of photonics, various optical chips have been developed to detect single viruses with the advantages of fast, label-free, affordable, and point of care deployment. Herein, optical approaches especially in three perspectives, e.g., flow-free optical methods, optofluidics, and surface-modification-assisted approaches, are summarized. The future development of on-chip optical-detection methods in the wave of emerging new ideas in nanophotonics is also briefly discussed.

Reverse transcription lesion-induced DNA amplification: An instrument-free isothermal method to detect RNA

One challenge in point-of-care (POC) diagnostics is the lack of room-temperature methods for RNA detection based on enzymatic amplification and visualization steps. Here we perform reverse transcription lesion-induced DNA amplification (RT-LIDA), an isothermal amplification method that only requires T4 DNA ligase. RT-LIDA involves the RNA-templated ligation of DNA primers to form complementary DNA (cDNA) followed by toehold-mediated strand displacement of the cDNA and its exponential amplification via our isothermal ligase chain reaction LIDA. Each step is tuned to proceed at 28 °C, which falls within the range of global room temperatures. Using RT-LIDA, we can detect as little as ∼100 amol target RNA and can distinguish RNA target from total cellular RNA. Finally, we demonstrate that the resulting DNA amplicons can be detected colorimetrically, also at room temperature, by rapid, target-triggered disassembly of DNA-modified gold nanoparticles. This integrated amplification/detection platform requires no heating or visualization instrumentation, which is an important step towards realizing instrument-free POC testing.

Naked-eye colorimetric detection of HCV RNA mediated by a 5' UTR-targeted antisense oligonucleotide and plasmonic gold nanoparticles

The increasing incidence of hepatitis C viral (HCV) infection worldwide is a major concern for causing liver cirrhosis and hepatocellular carcinoma, leading to increased morbidity and mortality. Currently, the prevalence of HCV infection is estimated to be in the range of ∼3%. According to the World Health Organization, antiviral drugs can cure more than 95% of the HCV infected cases, if timely diagnosis and treatment are provided. The gold standard RT-qPCR assay is expensive and requires a minimum turnaround time of 4 h. Hence, a rapid and cost-effective detection assay that can be used even in resource-limited settings would be highly beneficial for mass level screening. Herein, we present an Au NP based facile strategy for rapid, early-stage, and sensitive detection of HCV RNA in clinical samples which avoids thiol tagging to the antisense oligonucleotide and expensive infrastructure. This technique utilizes the hybridization of a short-chain antisense oligonucleotide from the 5' untranslated region (UTR) of the viral genome with the isolated HCV RNA samples. Using a specific sequence universal to all HCV genotypes-obtained through the NCBI BLASTn tool-the HCV positive samples have stabilized the citrate capped Au NPs against salt-induced aggregation, retaining their red color. On the other hand, negative controls, including HBV and HIV positive samples, do not stabilize the Au NPs, which results in purple coloration. Besides, the assay is successfully tested with a RNase A enzyme-treated HCV positive sample, which does not stabilize the Au NPs, thus confirming the role of the viral HCV RNA in this strategy. This Au NP based assay takes about 30 min using the viral RNA isolate and has high specificity with a detection limit of 100 IU mL^-1, which is ∼10 fold lower than the state-of-the-art Au NP based strategy.

A proposed insight into the anti-viral potential of metallic nanoparticles against novel coronavirus disease-19 (COVID-19)

BACKGROUND

Over the last ten months since December 2019, the world has faced infectious emerging novel coronavirus disease-2019 (COVID-19) outbreaks that had a massive global impact affecting over 185 countries.

MAIN BODY

Emerging novel COVID-19 is a global health emergency on a pandemic scale that represents a terror to human health through its ability to escape anti-viral measures. Such viral infections impose a great socioeconomic burden, besides global health challenges. This imposes a pressing need for the development of anti-viral therapeutic agents and diagnostic tools that demonstrate multifunctional, target-specific, and non-toxic properties. Nanotheranostics is regarded as a promising approach for the management of different viral infections. Nanotheranostics facilitates targeted drug-delivery of anti-viral therapeutics as well as contributing to the development of diagnostic systems. Multifunctional metallic nanoparticles (NPs) have emerged as innovative theranostic agents that enable sustainable treatment and effective diagnosis. Here we have reviewed current advances in the use of theranostic metallic NPs to fight against COVID-19, and discussed the application as well as limitations associated with nanotechnology-based theranostic approaches.

CONCLUSION

This review verified the potential use of some metal-based NPs as anti-viral nanotheranostic agents. Metal-based NPs could act as carriers that enable the sustainable and targeted delivery of active anti-viral molecules, or as diagnostic agents that allow rapid and sensitive diagnosis of viral infections.

A novel HCV electrochemical biosensor based on a polyaniline@Ni-MOF nanocomposite

A novel label-free electrochemical biosensor constructed using a polyaniline@nickel metal–organic framework (Ni-MOF) nanocomposite for direct detection of HCV-RNA.

Using gold nanoparticles to detect single-nucleotide polymorphisms: toward liquid biopsy

The possibility of detecting genetic mutations rapidly in physiological media through liquid biopsy has attracted the attention within the materials science community. The physical properties of nanoparticles combined with robust transduction methods ensure an improved sensitivity and specificity of a given assay and its implementation into point-of-care devices for common use. Covering the last twenty years, this review gives an overview of the state-of-the-art of the research on the use of gold nanoparticles in the development of colorimetric biosensors for the detection of single-nucleotide polymorphism as cancer biomarker. We discuss the main mechanisms of the assays that either are assisted by DNA-based molecular machines or by enzymatic reactions, summarize their performance and provide an outlook towards future developments.

A palindromic-based strategy for colorimetric detection of HIV-1 nucleic acid: Single-component assembly of gold nanoparticle-core spherical nucleic acids

Gold nanoparticle-core spherical nucleic acids (AuNP core-SNAs), by virtue of the programmable nature of oligonucleotides, have yielded access to the innovative strategies for targeted biodiagnostics. Here, DNA-directed self-assembly of AuNP core-SNAs has been used to design a colorimetric method to sense HIV-1 viral nucleic acid. This strategy utilizes an oligonucleotide with sequence of 5'-untranslated region (5' UTR) of the HIV-1 RNA genome anchored on the surface of AuNPs and a complementary linker strand with a palindromic sequence tail. In the absence of HIV-1 target nucleic acid the complementary linker induces self-assembly of SNAs based on sequence symmetry in the free palindromic tail which can bridge two DNA double helices. While in the presence of the target DNA, due to linker-target duplex formation, the colloidal stability and the red color of the SNAs solution are preserved. Picomole amounts of target DNA can easily be detected with the naked eyes. A 95-mer synthetic DNA strand with the same sequence of HIV-1 viral RNA was utilized for positive control of HIV-1 RNA. The selectivity of the selected linker was satisfactory up to 90% match.

Colorimetric biosensors for point-of-care virus detections

Colorimetric biosensors can be used to detect a particular analyte through color changes easily by naked eyes or simple portable optical detectors for quantitative measurement. Thus, it is highly attractive for point-of-care detections of harmful viruses to prevent potential pandemic outbreak, as antiviral medication must be administered in a timely fashion. This review paper summaries existing and emerging techniques that can be employed to detect viruses through colorimetric assay design with detailed discussion of their sensing principles, performances as well as pros and cons, with an aim to provide guideline on the selection of suitable colorimetric biosensors for detecting different species of viruses. Among the colorimetric methods for virus detections, loop-mediated isothermal amplification (LAMP) method is more favourable for its faster detection, high efficiency, cheaper cost, and more reliable with high reproducible assay results. Nanoparticle-based colorimetric biosensors, on the other hand, are most suitable to be fabricated into lateral flow or lab-on-a-chip devices, and can be coupled with LAMP or portable PCR systems for highly sensitive on-site detection of viruses, which is very critical for early diagnosis of virus infections and to prevent outbreak in a swift and controlled manner.

Nanotechnology: A reality for diagnosis of HCV infectious disease

Hepatitis C virus (HCV) is the primary etiologic agent of liver cirrhosis or hepatocellular carcinoma. HCV elevated infection rates are mostly due to the lack of an accurate and accessible screening and diagnosis, especially in low- and middle-income countries. Conventional HCV diagnostic algorithm consists of a serological test followed by a nucleic acid test. This sequence of tests is time consuming and not affordable for low-resource settings. Nanotechnology have introduced new promising tests for the diagnose of infectious diseases. Based on the employment of nanoparticles and other nanomaterials which lead to highly sensitive and specific nanoscale tests, most of them target pathogen genome. Implementation of nanoscale tests, which are affordable, portable and easy to use by non-specialized personal, would improve HCV diagnosis algorithm. In this review, we have summed up the current emerging nanotechnology tools, which will improve actual screening and treatment programs, and help to reach HCV elimination proposal.

Toxicological Behavior of Gold Nanoparticles on Various Models: Influence of Physicochemical Properties and Other Factors

Potential applications of gold nanoparticles in biomedicine have increasingly been reported on account of the ease of synthesis, bioinert characteristics, optical properties, chemical stability, high biocompatibility, and specificity. The safety of these particles remains a great concern, as there are differences among toxicity study protocols used. This article focuses on integrating results of research on the toxicological behavior of gold nanoparticles. This can be influenced by the physicochemical properties, including size, shape, surface charge, and other factors, such as methods used in the synthesis of gold nanoparticles, models used, dose, in vivo route of administration, and interference of gold nanoparticles with in vitro toxicity assay systems. Several researchers have reported toxicological studies with regard to gold nanoparticles, using various in vitro, in vivo, and in ovo models. The conflicting results concerning the toxicity of gold nanoparticles should thus be addressed to justify the safe use of gold nanoparticles in biomedicine.

Nanomedicine as a future therapeutic approach for Hepatitis C virus

Hepatitis C virus (HCV) is not easily cleared from the human body and in most cases turned into chronic infection. This chronicity is a major cause of liver damage, cirrhosis and hepatocellular carcinoma. Therefore, immediate detection and treatment of HCV guarantees eradication of the virus and prevention of chronicity complications. Since discovery of HCV in 1989, several emerging treatments were developed such as polyethylene glycol(PEG)-ylated interferon/ribavirin, direct acting antivirals and host targeting antivirals. Despite the progress in anti-HCV therapy, there is still a pressing need of new approaches for affordable and effective drug delivery systems using nanomedicine. In this review, the contribution of nanoparticles as a promising delivery system for HCV immunizing, diagnostic and therapeutic agents are discussed.

Gold nanoparticles and hepatitis B virus

Hepatitis B virus (HBV) infection is one of the major health issues in the world presently with high tendency of leading to hepatocarcinoma, cirrhosis and liver cancer, especially if not properly managed. It has been estimated that there are about 2 billion people with a serological profile of HBV infection, and 360 million patients worldwide living with chronic HBV-associated liver disease, hence the need to find an efficient and precise diagnosis technique to drive a robust treatment for Hepatitis B virus cannot be over emphasized. The emergence of analytical device like biosensor which combines biological and physicochemical element to detect HBV in screened samples has been very helpful in providing a timely intervention to tame this virus. This review focuses on the current state of biosensor researches with respect to various in-depth application of gold nanoparticle for the detection of HBV.

Localized surface plasmon resonance biosensing of tomato yellow leaf curl virus

Current techniques for plant virus detection, such as RT- PCR and ELISA, require multistep procedures and rely on sophisticated equipment. Due to the global spread of plant viruses, the development of simpler, faster and cheaper assay methods is inevitable. Gold nanoparticles (AuNPs) had raised much interest during recent years due to their novel optical properties or diagnostic purposes. The localized surface plasmon resonance (LSPR¹) of AuNPs had been used in the development of novel colorimetric nano-biosensing systems. The frequency and intensity of the LSPR peak generally depend on the shape, size and the surrounding medium of the AuNPs. In this study, unmodified AuNPs had been used to detect the unamplified Tomato yellow leaf curl virus (TYLCV) genome in infected plants. A specific DNA probe complementary to the coat protein region of virus genome was designed. The extracted total DNA of uninfected and infected plants was mixed with hybridization buffer and the designed probe. The mixture was denatured, annealed and then cooled to room temperature and was followed by AuNPs addition. The color changes in the samples indicating the presence of target virus infections were assessed visually after the addition of salt and confirmed by UV-Vis spectroscopy. The results showed that this strategy allowed for fast and sensitive detection of TYLCV genome and eliminated the need for PCR amplification and detection equipment.

A repertoire of biomedical applications of noble metal nanoparticles

The emerging properties of noble metal nanoparticles are attracting huge interest from the translational scientific community. In this feature article, we highlight recent advances in the adaptation of noble metal nanomaterials and their biomedical applications in therapeutics, diagnostics and sensing.

HCV Detection, Discrimination, and Genotyping Technologies

According to the World Health Organization (WHO), 71 million people were living with Hepatitis C virus (HCV) infection worldwide in 2015. Each year, about 399,000 HCV-infected people succumb to cirrhosis, hepatocellular carcinoma, and liver failure. Therefore, screening of HCV infection with simple, rapid, but highly sensitive and specific methods can help to curb the global burden on HCV healthcare. Apart from the determination of viral load/viral clearance, the identification of specific HCV genotype is also critical for successful treatment of hepatitis C. This critical review focuses on the technologies used for the detection, discrimination, and genotyping of HCV in clinical samples. This article also focuses on advantages and disadvantages of the reported methods used for HCV detection, quantification, and genotyping.

Optical assays based on colloidal inorganic nanoparticles

Colloidal inorganic nanoparticles have wide applications in the detection of analytes and in biological assays. A large number of these assays rely on the ability of gold nanoparticles (AuNPs, in the 20 nm diameter size range) to undergo a color change from red to blue upon aggregation. AuNP assays can be based on cross-linking, non-cross linking or unmodified charge-based aggregation. Nucleic acid-based probes, monoclonal antibodies, and molecular-affinity agents can be attached by covalent or non-covalent means. Surface plasmon resonance and SERS techniques can be utilized. Silver NPs also have attractive optical properties (higher extinction coefficient). Combinations of AuNPs and AgNPs in nanocomposites can have additional advantages. Magnetic NPs and ZnO, TiO2 and ZnS as well as insulator NPs including SiO2 can be employed in colorimetric assays, and some can act as peroxidase mimics in catalytic applications. This review covers the synthesis and stabilization of inorganic NPs and their diverse applications in colorimetric and optical assays for analytes related to environmental contamination (metal ions and pesticides), and for early diagnosis and monitoring of diseases, using medically important biomarkers.

Thiol-Capped Gold Nanoparticle Biosensors for Rapid and Sensitive Visual Colorimetric Detection of Klebsiella pneumoniae

In the last few years, gold nanoparticle biosensors have been developed for rapid, precise, easy and inexpensive with high specificity and sensitivity detection of human, plant and animal pathogens. Klebsiella pneumoniae serotype K2 is one of the common gram-negative pathogens with high prevalence. Therefore, it is essential to provide the effective and exclusive method to detect the bacteria. Klebsiella pneumoniae serotype K2 strain ATCC9997 genomic DNA was applied to establish the detection protocol either with thiol-capped oligonucleotide probes and gold nanoparticles or polymerase chain reaction based on K2A gene sequence. In the presence of the genomic DNA and oligonucleotide probes, a change in the color of gold nanoparticles and maximum changes in wavelength at 550-650 nm was achieved. In addition, the result showed specificity of 15 × 10⁵ CFU/mL and 9 pg/μL by gold nanoparticles probes. The lower limit of detection obtained by PCR method was 1 pg/μL. Moreover, results demonstrated a great specificity of the designed primers and probes for colorimetric detection assay and PCR. Colorimetric detection using gold nanoparticle probe with advantages such as the lower time required for detection and no need for expensive detection instrumentation compared to the biochemical and molecular methods could be introduced for rapid, accurate detection of the bacteria.

Applications of gold nanoparticles in virus detection

Viruses are the smallest known microbes, yet they cause the most significant losses in human health. Most of the time, the best-known cure for viruses is the innate immunological defense system of the host; otherwise, the initial prevention of viral infection is the only alternative. Therefore, diagnosis is the primary strategy toward the overarching goal of virus control and elimination. The introduction of a new class of nanoscale materials with multiple unique properties and functions has sparked a series of breakthrough applications. Gold nanoparticles (AuNPs) are widely reported to guide an impressive resurgence in biomedical and diagnostic applications. Here, we review the applications of AuNPs in virus testing and detection. The developed AuNP-based detection techniques are reported for various groups of clinically relevant viruses with a special focus on the applied types of bio-AuNP hybrid structures, virus detection targets, and assay modalities and formats. We pay particular attention to highlighting the functional role and activity of each core Au nanostructure and the resultant detection improvements in terms of sensitivity, detection range, and time. In addition, we provide a general summary of the contributions of AuNPs to the mainstream methods of virus detection, technical measures, and recommendations required in guidance toward commercial in-field applications.

Recent Advances in Nanoparticle Concentration and Their Application in Viral Detection Using Integrated Sensors

Early disease diagnostics require rapid, sensitive, and selective detection methods for target analytes. Specifically, early viral detection in a point-of-care setting is critical in preventing epidemics and the spread of disease. However, conventional methods such as enzyme-linked immunosorbent assays or cell cultures are cumbersome and difficult for field use due to the requirements of extensive lab equipment and highly trained personnel, as well as limited sensitivity. Recent advances in nanoparticle concentration have given rise to many novel detection methodologies, which address the shortcomings in modern clinical assays. Here, we review the primary, well-characterized methods for nanoparticle concentration in the context of viral detection via diffusion, centrifugation and microfiltration, electric and magnetic fields, and nano-microfluidics. Details of the concentration mechanisms and examples of related applications provide valuable information to design portable, integrated sensors. This study reviews a wide range of concentration techniques and compares their advantages and disadvantages with respect to viral particle detection. We conclude by highlighting selected concentration methods and devices for next-generation biosensing systems.

Colorimetric Detection of Unamplified Rift Valley Fever Virus Genetic Material Using Unmodified Gold Nanoparticles

Rift Valley fever virus (RVFV) is considered an enzootic virus in Africa. RVFV has caused several outbreaks in Egypt, sub-Saharan Africa and the Arabian Peninsula and is responsible for high mortality in ruminants and haemorrhagic fever in severe human cases. Although there are several molecular and serological diagnostic techniques used to detect this arthropod-borne virus with high sensitivity and efficiency, there is a need for a fast and reliable field screening test for rapid outbreak recording and containment. In this study, we developed a prototype point-of-care diagnostic test specific for RVFV detection using unmodified gold nanoparticles (AuNPs) that change colour in the presence of RVFV RNA, resulting in a simple but sensitive assay. The nanogold assay provides qualitative results showing the presence of the RVFV RNA in different sample types. The assay showed high accuracy and specificity, with a detection limit of 10 RNA copies/reaction, comparable with quantitative reverse transcription polymerase chain reaction. The assay result could be determined within 30 min with no need for specific detection instruments. To our knowledge, this is the first field test prototype to directly detect the RNA of RVFV without amplification using AuNPs.

Cloning of BBTV (Banana Bunchy Top Virus) components and screening of BBTV using functionalized gold nanoparticles

Banana bunchy top virus (BBTV) affects all varieties of banana plants and causes heavy economic loss in most of the banana cultivating areas. The BBTV genome comprises of six DNA components; in this study, we have cloned the six BBTV-DNA components from one of the BBTV-infected plants (Tri-8) and were submitted to GenBank. Analysis of the BBTV DNA-R component showed that it belonged to south Pacific group. Resistance against BBTV has not been observed so far in banana plants and removal and killing of the infected plants has been routinely practiced. Hence, early detection of BBTV infection would be desirable and various detection methods routinely employed include enzyme linked immunosorbent assay (antigen-antibody based) and molecular-based methods such as polymerase chain reaction (PCR), qPCR, or LAMP PCR. Most of these methods require enzymes or antibodies for detection and hence are expensive. Here, we report a visual detection method (AuNP probe assay) using gold nanoparticles (AuNPs) functionalized with an ssDNA-thiolated probe (CR1). This method is based on the hybridization of the functionalized AuNPs with the target DNA (BBTV). In the AuNP probe assay, the functionalized AuNPs retains red colour when BBTV DNA is present, and in the absence of BBTV DNA, the colour of the functionalized AuNPs changes to purple when salt is added. The AuNP probe assay was compared with PCR for the detection of banana plants and it was found that AuNP probe assay was better than PCR in detecting BBTV infection (86.5% for AuNP probe assay and 65% for PCR). The AuNP probe assay was found to be highly specific to BBTV and was found to detect up to 1 pg/μl of the plasmid (pTZBBTri 4, BBTV DNA) mixed with healthy banana DNA.

Chitosan gold nanoparticles for detection of amplified nucleic acids isolated from sputum

A platform for nucleic acid detection employing chitosan and chitosan coated gold nanoparticles (AuNPs) was developed. Mycobacterium tuberculosis (MTB) was used as a model target. MTB DNA was extracted from sputum using simple total nucleic acid extraction. Following amplification of MTB DNA, chitosan and AuNPs were added to samples. Free chitosan conjugated non-target DNA in negative samples, avoiding AuNP-DNA interaction and hence negative samples remained red. In positive samples, amplified DNA was capable of saturating free chitosan leading to AuNP aggregation where positive samples turned blue. Via visual color detection 15/16 MTB positive samples and 3/3 negative samples were correctly identified. This test is a 1-tube, 1-step assay reducing the risk of contamination in molecular laboratories and is a proof of concept on how chitosan; a cheap polymer could increase the sensitivity of AuNPs towards specific detection of nucleic acids without using target specific oligotargeters or expensive extraction kits.

Colorimetric detection based on localised surface plasmon resonance of gold nanoparticles: Merits, inherent shortcomings and future prospects

Localised surface plasmon resonance (LSPR) of gold nanoparticles (AuNPs) has been exploited for two decades in analytical science and has proven to be a powerful tool for the detection of various kinds of substances including small molecules, ions, macro biomolecules and microbes. Detection can be performed by visual colour change observations, photometry or resonance light scattering. A wide range of applications have been studied in the areas of environmental, pharmaceutical and biological analysis and clinical diagnosis. In this article, some fundamental aspects and important applications involving LSPR of AuNPs are reviewed. Several inherent shortcomings of these techniques and possible strategies to circumvent them are discussed.

Aptamer-based colorimetric detection of proteins using a branched DNA cascade amplification strategy and unmodified gold nanoparticles

A branched DNA amplification strategy was employed to design a colorimetric aptameric biosensor using unmodified gold nanoparticles (AuNPs). First, a programmed DNA dendritic nanostructure was formed using two double-stranded substrate DNAs and two single-stranded auxiliary DNAs as assembly components via a target-assisted cascade amplification reaction, and it was then captured by DNA sensing probe-stabilized AuNPs. The release of sensing probes from AuNPs led to the formation of unstable AuNPs, promoting salt-induced aggregation. By integrating the signal amplification capacity of the branched DNA cascade reaction and unmodified AuNPs as a sensing indicator, this amplified colorimetric sensing strategy allows protein detection with high sensitivity (at the femtomole level) and selectivity. The limit of detection of this approach for VEGF was lower than those of other aptamer-based detection methods. Moreover, this assay provides modification-free and enzyme-free protein detection without sophisticated instrumentation and might be generally applicable to the detection of other protein targets in the future.

Gold Nanoparticles for DNA/RNA-Based Diagnostics

The remarkable physicochemical properties of gold nanoparticles (AuNPs) have prompted development in exploring biomolecular interactions with AuNPs-containing systems, pursuing biomedical applications in diagnostics. Among these applications, AuNPs have been remarkably useful for the development of DNA/RNA detection and characterization systems for diagnostics, including systems suitable for point of need. Here, emphasis will be on available molecular detection schemes of relevant pathogens and their molecular characterization, genomic sequences associated with medical conditions (including cancer), mutation and polymorphism identification, and the quantification of gene expression.

Rapid detection of urinary long non-coding RNA urothelial carcinoma associated one using a PCR-free nanoparticle-based assay

We developed a specific hybridization assay for direct detection of long non-coding RNA urothelial carcinoma associated-1 (lncRNA-UCA1). Total RNA was extracted from urine pellet samples (bladder carcinoma patients and controls). Then, we compared the developed nanoassay with quantitative real time polymerase chain reaction (qRT-PCR) results in detection of urine UCA1 in bladder cancer and control samples. The sensitivity and the specificity of UCA1 nanoassay were 92.1% and 93.3%, respectively. The concordance of the two methods was 98%. Interestingly, all bilharzial benign cases showed negative lncRNA-UCA1 using both methods. UCA1-nanoassay is a valid test for direct detection of urine UCA1 for bladder cancer detection.

The prognostic value of histidine-rich glycoprotein RNA in breast tissue using unmodified gold nanoparticles assay

The aim of is this study is to explore the role of tissue histidine-rich glycoprotein (HRG) RNA as a promising clinically useful biomarker for breast cancer patients prognosis using nanogold assay. Expression of the HRG RNA was assessed by gold nanoparticles and conventional RT-PCR after purification by magnetic nanoparticles in breast tissue samples. The study included 120 patients, 60 of which were histologically proven breast carcinoma cases, 30 had benign breast lesions and 30 were healthy individuals who had undergone reductive plastic surgery. ER, PR and HER2 status were also investigated. The prognostic significance of tissue HRG RNA expression in breast cancer was explored. The magnetic nanoparticles coated with specific thiol modified oligonucleotide probe were used successfully in purification of HRG RNA from breast tissue total RNAs with satisfactory yield. The developed HRG AuNPs assay had a sensitivity and a specificity of 90 %, and a detection limit of 1.5 nmol/l. The concordance rate between the HRG AuNPs assay with RT-PCR after RNA purification using magnetic nanoparticles was 93.3 %. The median follow-up period was 60 months. Among traditional prognostic biomarkers, HRG was a significant independent prognostic marker in relapse-free survival (RFS). HRG RNA is an independent prognostic marker for breast cancer and can be detected using gold NPs assay, which is rapid, sensitive, specific, inexpensive to extend the value for breast cancer prognosis.

Gold nanoparticle-oligonucleotide conjugate to detect the sequence of lung cancer biomarker

Aimml: The aim of this project was to synthesize and characterize gold nanoparticles (GNPs) to trace the sequence of the hnRNPB1as a lung cancer biomarker.

METHODS

In the synthesis of GNPs with characteristics appropriate for conjugation, the size, morphology, and shape of the synthesized GNPs were determined by using spectrophotometry and transmission electron microscopy (TEM), followed by designing a probe for hnRNPB1biomarker with characteristics suitable for conjugation. Next, the GNPs were functionalized with a single-stranded DNA probe that was specific for the biomarker, for the characterization and confirmation of the conjugation process. Finally, for determination of minimum level of detection in solution including DNA target and probe aggregation, the changes in the absorption spectra of the samples in the range of 250-750 nm were determined using the NanoDrop ND 1000 spectrophotometer.

RESULTS

The surface of GNPs can be modified by utilizing ligands to selectively attach biomarkers. Thiol-bonding of DNA and chemical functionalization of GNPs are the most common approaches. Colloidal gold was synthesized with the citrate reduction method, as described by Turkevich et al. in 1951. In this study, the probe for hnRNPB1 was designed with a thiol crosslinker. Every set of conjugated GNPs was complementary to one end of the hnRNPB1 biomarker, and the probes were aligned in a tail to tail fashion onto the target.

CONCLUSION

Uniform GNPs were synthesized by the citrate reduction technique, and the outcomes of trials with variation in factors (shape and size of the nanoparticles, gold concentration, and conjugation between GNP and probes) were investigated. The gold nanoprobe-based technique is better than the PCR-based techniques, because there are no requirements of enzymatic amplification and gel electrophoresis, and the evaluation can be done using small amounts of sample.