Improved dissolution and absorption of ketoconazole in the presence of organic acids as pH-modifiers

Biofunctional Excipients: Their Emerging Role in Overcoming the Inherent Poor Biopharmaceutical Characteristics of Drugs

Background/Objectives: With advancements in biomaterial sciences, biofunctional excipients have emerged to focus on solving issues with the drugs' inherent biopharmaceutical characteristics such as poor solubility, permeability, in vivo dissolution, and effective targeting. These advanced excipients significantly impact drug solubility, dissolution rates, absorption rates, permeation rates, penetration ability, targeting ability, and pharmacokinetic profiles. Methods: A literature review of recently published articles was prepared. Data were collected using scientific search engines. This review provided a detailed discussion of various biofunctional excipients including smart polymers, targeted polymers, bioadhesive polymers, lipids, amino acids, cyclodextrins, and biosurfactants. Each category was discussed in detail concerning its biofunctional applications, the mechanisms underlying these biofunctions, and examples of their effects on drug performance. Results: The data obtained indicated that the rapid advances in the manufacturing of pharmaceutical excipients have resulted in the development of a diverse array of smart or intelligent excipients that play a crucial role in enhancing inherent poor biopharmaceutical characteristics. Conclusions: These advancements have also facilitated the development of various drug delivery systems, including immediate, controlled, sustained, and targeted drug release systems. Also, numerous nano-based delivery systems have emerged utilizing the newly produced excipients.

Advances in Oral Biomacromolecule Therapies for Metabolic Diseases

Metabolic diseases like obesity and diabetes are on the rise, and therapies with biomacromolecules (such as proteins, peptides, antibodies, and oligonucleotides) play a crucial role in their treatment. However, these drugs are traditionally injected. For patients with chronic diseases (e.g., metabolic diseases), long-term injections are accompanied by inconvenience and low compliance. Oral administration is preferred, but the delivery of biomacromolecules is challenging due to gastrointestinal barriers. In this article, we introduce the available biomacromolecule drugs for the treatment of metabolic diseases. The gastrointestinal barriers to oral drug delivery and strategies to overcome these barriers are also explored. We then discuss strategies for alleviating metabolic defects, including glucose metabolism, lipid metabolism, and energy metabolism, with oral biomacromolecules such as insulin, glucagon-like peptide-1 receptor agonists, proprotein convertase subtilisin/kexin type 9 inhibitors, fibroblast growth factor 21 analogues, and peptide YY analogues.

Ketoconazole-Fumaric Acid Pharmaceutical Cocrystal: From Formulation Design for Bioavailability Improvement to Biocompatibility Testing and Antifungal Efficacy Evaluation

Development of cocrystals through crystal engineering is a viable strategy to formulate poorly water-soluble active pharmaceutical ingredients as stable crystalline solid forms with enhanced bioavailability. This study presents a controlled cocrystallization process by cooling for the 1:1 cocrystal of Ketoconazole, an antifungal class II drug with the Fumaric acid coformer. This was successfully set up following the meta-stable zone width determination in acetone-water 4:6 (V/V) and pure ethanol. Considering the optimal crystallization data, laboratory scale-up processes were carried out at 1 g batch size, efficiently delivering the cocrystal in high yields up to 90% pure and single phase as revealed by powder X-ray diffraction. Biological assays in vitro showed improved viability and oxidative damage of the cocrystal over Ketoconazole on human dermal fibroblasts and hepatocarcinoma cells; in vivo, on Wistar rats, the cocrystal increased oral Ketoconazole bioavailability with transient minor biochemical transaminases increases and without histological liver alterations. Locally on Balb C mice, it induced no epicutaneuous sensitization. A molecular docking study conducted on sterol 14α-demethylase (CYP51) enzyme from the pathogenic yeast Candida albicans revealed that the cocrystal interacts more efficiently with the enzyme compared to Ketoconazole, indicating that the coformer enhances the binding affinity of the active ingredient.

Advances in Nanotechnology for Enhancing the Solubility and Bioavailability of Poorly Soluble Drugs

This manuscript offers a comprehensive overview of nanotechnology's impact on the solubility and bioavailability of poorly soluble drugs, with a focus on BCS Class II and IV drugs. We explore various nanoscale drug delivery systems (NDDSs), including lipid-based, polymer-based, nanoemulsions, nanogels, and inorganic carriers. These systems offer improved drug efficacy, targeting, and reduced side effects. Emphasizing the crucial role of nanoparticle size and surface modifications, the review discusses the advancements in NDDSs for enhanced therapeutic outcomes. Challenges such as production cost and safety are acknowledged, yet the potential of NDDSs in transforming drug delivery methods is highlighted. This contribution underscores the importance of nanotechnology in pharmaceutical engineering, suggesting it as a significant advancement for medical applications and patient care.

Randomly Methylated β-Cyclodextrin Inclusion Complex with Ketoconazole: Preparation, Characterization, and Improvement of Pharmacological Profiles

As a powerful imidazole antifungal drug, ketoconazole's low solubility (0.017 mg/mL), together with its odor and irritation, limited its clinical applications. The inclusion complex of ketoconazole with randomly methylated β-cyclodextrin was prepared by using an aqueous solution method after cyclodextrin selection through phase solubility studies, complexation methods, and condition selection through single factor and orthogonal strategies. The complex was confirmed by FTIR (Fourier-transform infrared spectroscopy), DSC (differential scanning calorimetry), TGA (thermogravimetric analysis), SEM (scanning electron microscope images), and NMR (Nuclear magnetic resonance) studies. Through complexation, the water solubility of ketoconazole in the complex was increased 17,000 times compared with that of ketoconazole alone, which is the best result so far for the ketoconazole water solubility study. In in vitro pharmacokinetic studies, ketoconazole in the complex can be 100% released in 75 min, and in in vivo pharmacokinetic studies in dogs, through the complexation, the Cmax was increased from 7.56 μg/mL to 13.58 µg/mL, and the AUC0~72 was increased from 22.69 μgh/mL to 50.19 μgh/mL, indicating that this ketoconazole complex can be used as a more efficient potential new anti-fungal drug.

An Artificial Gut/Absorption Simulator: Understanding the Impact of Absorption on In Vitro Dissolution, Speciation, and Precipitation of Amorphous Solid Dispersions

Upon dissolution, amorphous solid dispersions (ASDs) of poorly water-soluble compounds can generate supersaturated solutions consisting of bound and free drug species that are in dynamic equilibrium with each other. Only free drug is available for absorption. Drug species bound to bile micelles, polymer excipients, and amorphous and crystalline precipitate can reduce the drug solute's activity to permeate, but they can also serve as reservoirs to replenish free drug in solution lost to absorption. However, with multiple processes of dissolution, absorption, and speciation occurring simultaneously, it may become challenging to understand which processes lead to an increase or decrease in drug solution concentration. Closed, nonsink dissolution testing methods used routinely, in the absence of drug removal, allow only for static equilibrium to exist and obscure the impact of each drug species on absorption. An artificial gut simulator (AGS) introduced recently consists of a hollow fiber-based absorption module and allows mass transfer of the drug from the dissolution media at a physiological rate after tuning the operating parameters. In the present work, ASDs of varying drug loadings were prepared with a BCS-II model compound, ketoconazole (KTZ), and hypromellose acetate succinate (HPMCAS) polymer. Simultaneous dissolution and absorption testing of the ASDs was conducted with the AGS, and simple analytical techniques were utilized to elucidate the impact of bound drug species on absorption. In all cases, a lower amount of crystalline precipitate was formed in the presence of absorption relative to the nonsink dissolution "control". However, formation of HPMCAS-bound drug species and crystalline precipitate significantly reduced KTZ absorption. Moreover, at high drug loading, inclusion of an absorption module was shown to enhance ASD dissolution. The rank ordering of the ASDs with respect to dissolution was significantly different when nonsink dissolution versus AGS was used, and this discrepancy could be mechanistically elucidated by understanding drug dissolution and speciation in the presence of absorption.

Praziquantel Fifty Years on: A Comprehensive Overview of Its Solid State

This review discusses the entire progress made on the anthelmintic drug praziquantel, focusing on the solid state and, therefore, on anhydrous crystalline polymorphs, amorphous forms, and multicomponent systems (i.e., hydrates, solvates, and cocrystals). Despite having been extensively studied over the last 50 years, new polymorphs and the greater part of their cocrystals have only been identified in the past decade. Progress in crystal engineering science (e.g., the use of mechanochemistry as a solid form screening tool and more strategic structure-based methods), along with the development of analytical techniques, including Synchrotron X-ray analyses, spectroscopy, and microscopy, have furthered the identification of unknown crystal structures of the drug. Also, computational modeling has significantly contributed to the prediction and design of new cocrystals by considering structural conformations and interactions energy. Whilst the insights on praziquantel polymorphs discussed in the present review will give a significant contribution to controlling their formation during manufacturing and drug formulation, the detailed multicomponent forms will help in designing and implementing future praziquantel-based functional materials. The latter will hopefully overcome praziquantel's numerous drawbacks and exploit its potential in the field of neglected tropical diseases.

Revisiting Supersaturation of a Biopharmaceutical Classification System IIB Drug: Evaluation via a Multi-Cup Dissolution Approach and Molecular Dynamic Simulation

As a subclass of the biopharmaceutical classification system (BCS) class II, basic drugs (BCS IIB) exhibit pH-dependent solubility and tend to generate supersaturation in the gastrointestinal tract, leading to less qualified in vitro-in vivo correlation (IVIVC). This study aims to develop a physiologically based multi-cup dissolution approach to improve the evaluation of the supersaturation for a higher quality of IVIVC and preliminarily explores the molecular mechanism of supersaturation and precipitation of ketoconazole affected by Polyvinylpyrrolidone-vinyl acetate copolymer (PVPVA) and hydroxypropyl methyl-cellulose (HPMC). The concentration of ketoconazole in each cup of the dynamic gastrointestinal model (DGIM) was measured using fiber optical probes. Molecular interactions between ketoconazole and PVPVA or HPMC were simulated by Materials Studio. The results demonstrated that PVPVA and HPMC improved and maintained the supersaturation of ketoconazole. PVPVA exhibited superior precipitation inhibitory effect on ketoconazole molecule aggregation due to slightly stronger van der Waals forces as well as unique electrostatic forces, thereby further enhancing in vitro drug absorption, which correlated well with in vivo drug absorption. Compared with a conventional dissolution apparatus paddle method, the DGIM improved the mean prediction error through the IVIVC from 19.30% to 9.96%, reaching the qualification criteria. In conclusion, the physiologically based multi-cup dissolution approach enables improved evaluation of supersaturation in gastrointestinal transportation of BCS IIB drug ketoconazole, enabling screening screen precipitation inhibitors and achieving qualified IVIVC for drug formulation studies.

Control of Dissolution and Supersaturation/Precipitation of Poorly Water-Soluble Drugs from Cocrystals Based on Solubility Products: A Case Study with a Ketoconazole Cocrystal

This study demonstrates in vitro and in vivo control of cocrystal dissolution with drug supersaturation/precipitation based on the solubility product of a cocrystal. As a cocrystal model, KTZ-4ABA (ketoconazole, KTZ, a poorly water-soluble drug cocrystal, with 4-aminobenzoic acid, 4ABA, a coformer) was used. The presence of 4ABA in the dissolution media dramatically reduced the dissolution rate of KTZ-4ABA and regulated the supersaturation/precipitation of KTZ, supported by the solubility product of KTZ-4ABA. In the in vitro dissolution study, the combined solid form of KTZ-4ABA and a ten-fold amount of 4ABA significantly lowered the degree of KTZ supersaturation without precipitation and further cocrystal dissolution. To confirm cocrystal dissolution control in the gastrointestinal tract with the same composition as the in vitro study, an in vivo oral administration study with rats was conducted. When KTZ was coadministered to rats in the cocrystal form, an excess of 4ABA coadministered with KTZ-4ABA in the solid form reduced the maximum plasma KTZ concentration (Cmax), prolonged the time to reach the Cmax, but did not influence the area under the plasma concentration-time curve. These results demonstrate that both in vitro and in vivo cocrystal dissolution can be regulated by adding an appropriate amount of coformer based on the solubility product, which can be one of the promising strategies for the oral use of cocrystal formulations.

Predicting Glass-Forming Ability of Pharmaceutical Compounds by Using Machine Learning Technologies

Low aqueous solubility is a common and serious challenge for most drug substances not only in development but also in the market, and it may cause low absorption and bioavailability as a result. Amorphization is an intermolecular modification strategy to address the issue by breaking the crystal lattice and enhancing the energy state. However, due to the physicochemical properties of the amorphous state, drugs are thermodynamically unstable and tend to recrystallize over time. Glass-forming ability (GFA) is an experimental method to evaluate the forming and stability of glass formed by crystallization tendency. Machine learning (ML) is an emerging technique widely applied in pharmaceutical sciences. In this study, we successfully developed multiple ML models (i.e., random forest (RF), XGBoost, and support vector machine (SVM)) to predict GFA from 171 drug molecules. Two different molecular representation methods (i.e., 2D descriptor and Extended-connectivity fingerprints (ECFP)) were implemented to process the drug molecules. Among all ML algorithms, 2D-RF performed best with the highest accuracy, AUC, and F1 of 0.857, 0.850, and 0.828, respectively, in the testing set. In addition, we conducted a feature importance analysis, and the results mostly agreed with the literature, which demonstrated the interpretability of the model. Most importantly, our study showed great potential for developing amorphous drugs by in silico screening of stable glass formers.

Melting point depression for enhanced dissolution rate of eslicarbazepine acetate

BACKGROUND

Eslicarbazepine acetate (ESL) is antiepileptic agent which is approved for use as single therapy or in combination with other drugs. However, it suffers from poor oral bioavailability. Modulation of drug crystallinity can be utilized as an approach for enhancing drug dissolution.

OBJECTIVE

Accordingly, the aim of this study was to investigate possible eutectic system formation between eslicarbazepine with either tartaric acid or citric acid.

METHODOLOGY

Eslicarbazepine acetate was subjected to wet co-grinding with tartaric acid or citric acid at different molar ratios. The prepared formulations were assessed using Fourier-transform infrared (FTIR), X-ray powder diffraction (XRPD), differential scanning calorimetry in addition to dissolution studies.

RESULTS

The characterization techniques confirmed eutectic system formation with tartaric and citric acid with the optimum molar ratio for eutexia being 1:1 for both substances. Development of eutectic systems significantly enhanced the dissolution rate of ESL. Increasing the ratio of tartaric acid higher than the optimum ratio for eutexia resulted in additional increase in drug dissolution rate. This suggested the impact of pH modification on drug dissolution rate. The enhanced dissolution rate in case of the formulations containing ESL and citric acid was accredited to combined effect of eutaxia and pH modulation. These explanations were proven from investigating the dissolution rate of the physical mixtures which were inferior in their dissolution rate compared with the prepared formulations.

CONCLUSION

co-processing of ESL with either citric acid or tartaric acid resulted in hastened dissolution rate which was accredited to combined effect of eutexia with pH modification.

Modified Stability of microRNA-Loaded Nanoparticles

microRNAs represent promising drugs to treat and prevent several diseases, such as diabetes mellitus. microRNA delivery brings many obstacles to overcome, and one strategy to bypass them is the manufacturing of self-assembled microRNA protein nanoparticles. In this work, a microRNA was combined with the cell-penetrating peptide protamine, forming so-called proticles. Previous studies demonstrated a lack of microRNA dissociation from proticles. Therefore, the goal of this study was to show the success of functionalizing binary proticles with citric acid in order to reduce the binding strength between the microRNA and protamine and further enable sufficient dissociation. Thus, we outline the importance of the present protons provided by the acid in influencing colloidal stability, achieving a constant particle size, and monodispersing the particle size distribution. The use of citric acid also provoked an increase in drug loading. Against all expectations, the AFM investigations demonstrated that our nanoparticles were loose complexes mainly consisting of water, and the addition of citric acid led to a change in shape. Moreover, a successful reduction in binding affinity and nanoparticulate stability are highlighted. Low cellular toxicity and a constant cellular uptake are demonstrated, and as uptake routes, active and passive pathways are discussed.

Effect of functional excipients on the dissolution and membrane permeation of furosemide formulated into multiple-unit pellet system (MUPS) tablets

The effect of functional excipients (i.e. chitosan, sodium lauryl sulphate, NaHCO₃, and CaCO₃) formulated in multiple-unit pellet system (MUPS) tablets has been investigated on the dissolution and permeability of furosemide, a BCS class IV compound. Spherical beads were produced and compressed into MUPS tablets. MUPS tablet formulations were evaluated for hardness, disintegration, mass variation, friability, and dissolution (pH 1.2, pH 4.6, and pH 7.4). Ex vivo permeability studies were conducted across excised pig tissues (pyloric antrum and duodenal region) on selected experimental MUPS tablet formulations. Histological analysis was conducted on the tissues after exposure to selected experimental MUPS tablet formulations. Dissolution results in the 0.1 M HCl (pH 1.2) showed the highest effect of the excipients on furosemide release. Dissolution parameters showed increased dissolution of furosemide for the MUPS tablet formulations containing functional excipients: a 4.5-10-fold increase in the AUC values, the %_max showed a 60-70% increase and up to a 19-fold increase in DRi was seen. Permeability results revealed a 2.5-fold higher cumulative percentage transport for selected formulations. The results proved that functional excipients incorporated into beads, compressed into MUPS tablet formulations increased furosemide release as well as permeation across excised intestinal tissues.

Development of an enhanced formulation to minimize pharmacokinetic variabilities of a weakly basic drug compound

Formulating poorly water soluble, weakly basic drugs with consistent exposure is often a challenge due to pH dependent solubility. When the oral formulation is exposed to different pH ranges in the gastrointestinal (GI) tract, drug precipitation or incomplete dissolution may occur resulting in decreased drug absorption and higher intra-and inter-patient pharmacokinetic variabilities.In the present study, a series of enhanced formulations containing organic acids and/or surfactants were developed and compared with conventional formulations with respect to their in vitro dissolution performance. The formulation containing 5% citric acid and 1% sodium lauryl sulfate (SLS) showed much less variations in dissolution performance at different pH conditions than a conventional formulation. The combination of citric acid and SLS demonstrated a synergistic effect as compared to use of citric acid alone or in combination with PEG4000 as a precipitation inhibitor.When compared with a conventional formulation and a spray-dried amorphous solid dispersion (ASD) formulation in a dog pharmacokinetics study, the enhanced formulation demonstrated the least AUC and C_max variability between the two gastric pH-controlled groups. In conclusion, an enhanced formulation using a combination of organic acid and surfactant is recommended for weakly basic drug compounds to minimize drug pharmacokinetic variabilities in clinical studies.

Scalable flibanserin nanocrystal-based novel sublingual platform for female hypoactive sexual desire disorder: engineering, optimization adopting the desirability function approach and in vivo pharmacokinetic study

Flibanserin (FLB) was approved by FDA for the treatment of pre-menopausal female hypoactive sexual desire disorder (HSDD). FLB suffers from low oral bioavailability (33%) which might be due to hepatic first-pass metabolism in addition to its poor aqueous solubility. The sublingual route could be a promising alternative for FLB due to the avoidance of enterohepatic circulation. However, the drug needs to dissolve in the small volume of saliva in order to be absorbed through the sublingual mucosa. Therefore, FLB nanocrystals were prepared by sono-precipitation technique according to 23 full factorial design. FLB-nanocrystals were formulated using two surfactants (PVP K30 and PL F127) in two different amounts (200 and 400 mg) and the volume of ethanol was either 3 or 5 mL. Nanocrystal formulation was optimized according to the desirability function to have a minimum particle size, zeta potential, polydispersity index, and maximum saturated solubility. The optimized formula had a particle size of 443.12 ± 14.91 nm and a saturated solubility of 23.27 ± 4.62 mg/L which is five times the saturated solubility of FLB. Nanocrystal dispersion of the optimized formula was solidified by freeze-drying and used to prepare rapidly disintegrating sublingual tablets containing Pharmaburst® as superdisintegrant. Sublingual tablet formulation with the shortest disintegration time (36 s) was selected for the in vivo study. FLB nanocrystal-based sublingual tablets exhibited a two-fold increase in bioavailability with a faster onset of action compared to the commercially available oral formulation. These findings prove the potential application of FLB nanocrystal-based sublingual tablets in the treatment of HSDD.

In Vitro-In Vivo Correlation in Cocrystal Dissolution: Consideration of Drug Release Profiles Based on Coformer Dissolution and Absorption Behavior

This study assessed the in vitro-in vivo correlation in cocrystal dissolution based on the coformer behavior. 4-Aminobenzoic acid (4ABA) was used as a coformer. Cocrystals of poorly water-soluble drugs with 4ABA, ketoconazole cocrystal (KTZ-4ABA), posaconazole cocrystal (PSZ-4ABA), and itraconazole cocrystal (ITZ-4ABA) were used. These three cocrystals generated supersaturated solutions in fasted state simulated intestinal fluid (FaSSIF) in a small-scale, 8 mL dissolution vessel. The time profile of the dissolved amount of 4ABA, an indicator of cocrystal dissolution, was significantly different among the three cocrystals. Under the conditions utilized, half of the KTZ-4ABA cocrystal solid rapidly dissolved within 5 min and the dissolved amount (% of applied amount) of KTZ and 4ABA was the same. Then, even though the residual solid cocrystal gradually dissolved, KTZ precipitated with time. The PSZ-4ABA cocrystal dissolved in a linear fashion with time but the dissolved concentration of PSZ reached a plateau in the supersaturated state and was maintained for at least 2 h. The dissolution rate of ITZ-4ABA was very slow compared to those of the other cocrystals, but a similar tendency was observed between cocrystal dissolution and the dissolved amount of ITZ. The rank order of the cocrystal dissolution rate based on the conformer concentration was KTZ-4ABA > PSZ-4ABA > ITZ-4ABA. Furthermore, cocrystallization of the three drugs with 4ABA significantly enhanced the oral drug absorption in rats. The rank order of the in vivo cocrystal dissolution rate by a deconvolution analysis with the plasma concentration-time profile of 4ABA was KTZ-4ABA > PSZ-4ABA > ITZ-4ABA, which corresponded well with the in vitro dissolution profiles of the cocrystals. These results indicate that analysis of cocrystal dissolution based on the coformer behavior may be useful to evaluate the in vitro and in vivo cocrystal dissolution.

Application or function of citric acid in drug delivery platforms

Nontoxic materials with natural origin are promising materials in the designing and preparation of the new drug delivery systems (DDSs). Today's, citric acid (CA) has attracted a great deal of attention because of its special features; green nature, biocompatibility, low price, biodegradability, and commercially available property. So, CA has been employed in the preparation of the various platforms to induce a suitable property on their structure. Recently, several research groups investigated the CA-based platforms in different forms like tablets, dendrimers, hyperbranched polymers, (co)polymer, hydrogels, and nanoparticles as efficient DDSs. By considering an increasing amount of published articles in this field, for the first time, in this review, an overview of the published works regarding CA applications in the design of various DDSs is presented with a detailed and insightful discussion.

Stable solid dispersion of lurasidone hydrochloride with augmented physicochemical properties for the treatment of schizophrenia and bipolar disorder

Crystalline solid dispersion of lurasidone hydrochloride (LH) was made with various polar and non-polar small molecules to overcome the poor aqueous solubility issue. LH-Glutathione (GSH) solid dispersion in 1:1 ratio was prepared by co-grinding method and characterized by using differential scanning calorimetry (DSC), powder X-ray diffraction, Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy. GSH acts as antioxidant and reported for anti-schizophrenic activity may provide synergistic action with LH or reduce the side effects. LH in LH-GSH solid dispersion (SD) has shown improvement in solubility by 7.9 folds than plain drug which translated in terms of improved dissolution rate by two-folds. The in vitro dissolution results showed maximum dissolution rate with LH-GSH SD (97.85 ± 2.40%) compared to plain drug (50.5 ± 3.02%) at 15 min (t₁₅ min, %) and thus, satisfying criteria of immediate release dosage form. DSC and FTIR data confirmed the stability of LH-GSH SD for 3 months at accelerated stability condition (40 ± 2°C and 75 ± 5% RH). The prepared LH-GSH SD can be used as a tool to target dual problems that is, enhanced physicochemical properties along with possible management of disorder which could be due to synergism with co-administered GSH. This approach is thought to be efficiently providing the relief to the psychological patients.

Similarity of dissolution profiles from biorelevant media: Assessment of interday repeatability, interanalyst repeatability, and interlaboratory reproducibility using ibuprofen and ketoconazole tablets

Biorelevant media are increasingly being employed as dissolution media in drug development, including in smaller volumes than 900ml and under non-sink conditions. The objectives were to assess interday repeatability, interanalyst repeatability, and interlaboratory reproducibility of dissolution profiles from biorelevant media, as well as to assess the impacts of biorelevant media production method and biorelevant medium volume on dissolution profiles. Ibuprofen and ketoconazole tablets were subjected to dissolution testing in 500ml, 300ml, and 40ml of fasted state simulated gastric fluid (FaSSGF), fed state simulated gastric fluid (FeSSGF), fasted state simulated intestinal fluid version 2 (FaSSIF-V2), and fed state simulated intestinal fluid version 2 (FeSSIF-V2). f₂ was used to assess repeatability and reproducibility of dissolution profiles. Results indicate favorable interday repeatability (83 of 88 comparisons were similar), favorable interanalyst repeatability (19 of 21 comparisons were similar), and favorable interlaboratory reproducibility (10 of 14 comparisons were similar) of dissolution profiles from biorelevant media, with commercial media showing greater interlaboratory reproducibility than 'from scratch' media. However, biorelevant medium production had low impact on profiles when one analyst conducted all medium preparations and study procedures at one location. Additionally, biorelevant media detected differences when products were not similar. Overall, biorelevant media showed favorable repeatability and reproducibility performance.

Simultaneous improvement of ketoconazole solubility, antifungal and antibiofilm activity by multicomponent complexation

Background: A novel multicomponent complex (MC) of ketoconazole (KET) with β-cyclodextrin (β-CD) and N-acetylcysteine (NAC) was developed with the purpose of improving the solubility as well as the antifungal and antibiofilm activity of KET against Candida albicans. Results & methodology: The interactions among the components were studied using nuclear magnetic resonance, thermal analysis, powder x-ray diffraction, infrared spectroscopy and scanning electron microscopy. Phase-solubility studies demonstrated a considerable increase in the solubility of the MC. An enhancement in antibiofilm and antifungal activity of MC was determined against C. albicans by XTT assay and microbiological studies. Conclusion: This MC, with improvements in the drug pharmaceutical performance, might have an important potential in the development of new pharmaceutical formulations of KET.

Enhanced pharmacokinetic performance of dapoxetine hydrochloride via the formulation of instantly-dissolving buccal films with acidic pH modifier and hydrophilic cyclodextrin: Factorial analysis, in vitro and in vivo assessment

Instantly dissolving buccal films have gained attention owing to their easy administration and capability to surmount the hepatic first pass effect of drugs. Dapoxetine hydrochloride (DPX) has a low oral bioavailability due to significant hepatic first pass metabolism. In addition, DPX is a weakly basic drug with a pH dependent solubility that could limit its dissolution in the body neutral fluids. In order to surpass these challenges, this work aimed at enhancing DPX bioavailability via the formulation of instantly dissolving buccal films comprising a pH modifier and a hydrophilic cyclodextrin. Tartaric acid and hydroxypropyl beta-cyclodextrin were selected as dual solubilizing agents based on the screening study. 3² factorial design was employed for the formulation and optimization of DPX films. Statistical analysis revealed that hydroxypropyl methyl cellulose E5: maltodextrin ratio and propylene glycol concentrations have significant effects on mechanical properties, percent DPX dissolved after 5 min, and in vivo mouth dissolving time at P  < 0.05. The optimized film [HPMC E5: MDX, 1:1 and 1% PG] showed no significant change of properties or drug dissolution upon storage at 40 °C/75% RH for a period of 3 months. In addition, the optimized film showed significantly enhanced absorption relative to the oral reference tablet. Therefore, the optimized film could be considered a promising delivery system for DPX with expected improved patient compliance and enhanced pharmacokinetic performance.

The Role of Functional Excipients in Solid Oral Dosage Forms to Overcome Poor Drug Dissolution and Bioavailability

Many active pharmaceutical ingredients (APIs) exhibit poor solubility and low dissolution rates in aqueous environments such as the luminal fluids of the gastrointestinal tract. The oral bioavailability of these compounds is usually very low as a result of their poor solubility properties. In order to improve the bioavailability of these poorly soluble drugs, formulation strategies have been applied as a means to improve their aqueous solubility and dissolution rates. With respect to formulation approaches, excipients can be incorporated in the formulation to assist in the dissolution process of the drug, or specialized dosage forms can be formulated that improve dissolution rate through various mechanisms. This paper provides an overview of selected excipients (e.g., alkalinizing agents, surfactants and sugars) that can be used in formulations to increase the dissolution rate as well as specialized dosage forms such as self-emulsifying delivery systems and formulation techniques such as inclusion complexes and solid dispersions. These formulation approaches are discussed with available examples with specific reference to positive outcomes in terms of drug solubility and bioavailability enhancement.

Multifunctional nanoemulsions for intraductal delivery as a new platform for local treatment of breast cancer

Considering that breast cancer usually begins in the lining of the ducts, local drug administration into the ducts could target cancers and pre-tumor lesions locally while reducing systemic adverse effects. In this study, a cationic bioadhesive nanoemulsion was developed for intraductal administration of C6 ceramide, a sphingolipid that mediates apoptotic and non-apoptotic cell death. Bioadhesive properties were obtained by surface modification with chitosan. The optimized nanoemulsion displayed size of 46.3 nm and positive charge, properties that were not affected by ceramide encapsulation (0.4%, w/w). C6 ceramide concentration necessary to reduce MCF-7 cells viability to 50% (EC₅₀) decreased by 4.5-fold with its nanoencapsulation compared to its solution; a further decrease (2.6-fold) was observed when tributyrin (a pro-drug of butyric acid) was part of the oil phase of the nanocarrier, a phenomenon attributed to synergism. The unloaded nanocarrier was considered safe, as indicated by a score <0.1 in HET-CAM models, by the high survival rates of Galleria mellonella larvae exposed to concentrations ≤500 mg/mL, and absence of histological changes when intraductally administered in rats. Intraductal administration of the nanoemulsion prolonged drug localization for more than 120 h in the mammary tissue compared to its solution. These results support the advantage of the optimized nanoemulsion to enable mammary tissue localization of C6 ceramide.

Design and Evaluation of Hydrophilic Matrix System for pH-Independent Sustained Release of Weakly Acidic Poorly Soluble Drug

The aim of this research was to design and evaluate a hydrophilic matrix system for sustained release of glipizide, a weakly acidic poor soluble drug. A combination of inclusion complexation and microenvironmental pH modification techniques was utilized to improve the dissolution and pH-independent release of glipizide. Hydroxypropyl-β-cyclodextrin (HP-β-CD) was used as the complexation agent while sodium citrate and magnesium oxide (MgO) were used as model pH modifiers. The hydrophilic matrix tablets were prepared by powder direct compression and evaluated by in vitro dissolution study respectively in pH 6.8 and pH 1.2 dissolution media. The formulations containing MgO exhibited increased cumulative drug release from less than 40% in the reference formulation to 90% within 24 h in acidic media (pH 1.2). The release profile in acidic media was similar to the alkaline media (pH 6.8) with a similarity factor (f₂) of 55.0, suggesting the weakening of the effect of pH on the dissolution efficiency of glipizide. The release profile fitted well into the Higuchi model and the dominant mechanism of drug release was Fickian diffusion while case II transport/polymer relaxation occurred. In conclusion, combining inclusion complexation agents and pH modifiers had improved the dissolution of glipizide as well as achieved the pH-independent release profile.

Interaction of erythromycin and ketoconazole on the neurological, biochemical and behavioral responses in crucian carp

The presence of pharmaceuticals in the aquatic environment has received great attention due to their potential impacts on public health. The single, as well as the combined toxicities of erythromycin (ERY) and ketoconazole (KCZ) on the bioaccumulation, biochemical and behavioral responses, were examined in crucian carp. This study focused on the uptake of contaminants, acetylcholinesterase (AChE) activity in the brain, swimming and shoaling behavior of fish. After 14days of binary exposure, the addition of KCZ at nominal concentrations of 0.2, 2 and 20μg/L significantly increased the accumulation of ERY in the brain of the fish and the bioconcentration factor of 2.08 was 2.6-fold higher than that calculated from the ERY-alone exposure. The brain AChE activity was significantly inhibited by ERY and KCZ with a significant correlation with respect to the accumulative concentration of the contaminants. The inhibition rates of swimming activity to KCZ were increased with a corresponding increase in the exposure concentration of KCZ in the single exposure. However, this manner was altered by the combined exposure. In addition, shoaling was significantly enhanced by KCZ-alone exposure, which was significantly correlated with the swimming activity. This study indicates that the mixture of the contaminants may cause endocrine disrupting effects and behavior modification especially in fish with known ecological and evolutionary consequences.

Effects of Manufacturing Methods on Dissolution and Absorption of Ketoconazole in the Presence of Organic Acid as a pH Modifier

Poorly water-soluble compounds have a potential risk of low and variable bioavailability caused by incomplete dissolution. Incorporation of organic acids as pH modifiers is effective method for solubility enhancement of basic compounds and requires no special technique and equipment. The purpose of this study was to evaluate the effect of manufacturing method on the extent of drug solubility enhancement. We successfully prepared the granules and tablets containing ketoconazole (KZ), which is weakly basic, as a model compound and citric acid as a pH modifier using conventional wet and dry granulations. KZ solubility under non-sink condition was enhanced with supersaturation using both wet and dry granulations. High-shear granulation was the most effective method in terms of KZ dissolution enhancement, because both an intimate contact and strong bonding between KZ and incorporated acid were achieved. KZ dissolved amount from the granules prepared by high-shear granulation was about eight times higher than that from the granules without the acid. The granulation involved to suppress a diffusion of acid dissolved, leading to the effectively maintained supersaturation state. The bioavailability of KZ after oral administration to rats was improved by applying high-shear granulation with citric acid independent of gastrointestinal pH. The granules prepared by high-shear granulation showed the bioavailability about 1.7-fold higher than that of the physical mixture in rats with and without neutralization of stomach. As a result, both the dissolution and absorption rates of KZ after oral administration were enhanced using conventional manufacturing technology.