Source, migration and toxicology of microplastics in soil

Research advances on microplastics contamination in terrestrial geoenvironment: A review

The contamination of microplastics in terrestrial geoenvironment (CMTG) is widespread and severe and has, received considerable attention. However, studies on CMTG are in their initial stages. The literature on CMTG published in the past decade was analyzed through bibliometric analysis, such as the annual publications, countries with the highest contributions, prolific authors, and author keywords. The sources, compositions, migrations and environmental impacts of CMTG are summarized, and possible future directions are proposed. This study analyzed the annual publications, countries with the highest contributions, prolific authors, and author keywords related to microplastics. The results demonstrated that 15,306 articles were published between 2014 and 2023. China is the leading country in terms of the total number of publications. The main sources of CMTG include landfills, agricultural non-point sources, sewage treatment systems and transportation systems. The composition of the CMTG exhibits significantly temporal and spatial variability from different sources. The migration paths of the CMTG were within the soil, groundwater seepage and wind transportation of suspended particles. Microplastics increase soil cohesion, decrease porosity, reduce pore scale, decrease air circulation, and increase water retention capacity, and the exudation of highly water-soluble additives in microplastics can cause secondary contamination of geological entities. Microplastics have an adverse effect on plant growth, animal digestion, microbial activity, energy and lipid metabolism, oxidative stress, and respiratory diseases in humans. It is recommended to develop more efficient and convenient quantitative testing methods for microplastics, formulate globally harmonized testing and evaluation standards, include microplastic testing in testing programs for contaminated soils, and develop efficient methods for the remediation of microplastic contaminated geological bodies.

The hidden threat: Unraveling the impact of microplastics on reproductive health

Microplastics, with intricate physical and chemical characteristics, infiltrate the food chain and extensively impact ecosystems. Despite acknowledging the link between environmental pollution and declining fertility, the specific mechanisms affecting reproductive health remain to be elucidated. This review emphasizes the global correlation between microplastics and subfertility, focusing on entry pathways and impacts on ecosystems. Research suggests that microplastics disrupt the neuroendocrine system, influencing sex hormone synthesis through the hypothalamic-pituitary-gonadal (HPG) axis. In the reproductive system, microplastics interfere with the blood-testis barrier, impairing spermatogenesis in males, and causing placental dysfunction, ovarian atrophy, endometrial hyperplasia, and fibrosis in females. Moreover, microplastics potentially affect offspring's lipid metabolism and reproductive functions. However, complex microplastic compositions and detection method limitations impede research progress. Mitigation strategies for reproductive effects, combined with addressing microplastic pollution through sustainable practices, are imperative. This review underscores the urgency of global initiatives and collaborative research to safeguard reproductive health amid escalating microplastic contamination.

Airborne transboundary microplastics-A Swirl around the globe

Microplastics are persistent pollutants discovered and extensively researched in marine, freshwater, and terrestrial ecosystems but have yet to receive attention in an atmospheric context. Although recent reports stated the presence of microplastics in the air, their global existence and distribution are not critically discussed to date. This review aimed to investigate the current status of research on atmospheric microplastics through bibliometric analysis and by comparing and summarising published research on global distribution. The review also provides a summary of methods that have been used to collect samples, identify microplastics, quantify their occurrence, and determine their transport mechanisms. The bibliometric analysis revealed that atmospheric microplastic studies predominantly originated in China. Clothing, vehicle, and tire materials were the major primary sources while house furniture, construction materials, landfills, urban dust, plastic recycling processes, and agricultural sludge were precursor secondary sources. Polyethylene, polypropylene, and polyethylene terephthalate microfibres have most frequently found in indoor and outdoor atmospheres. Level of urbanization and temporal or spatial distributions governs the fate of airborne microplastics, however, the knowledge gap in the retention and circulation of microplastics through the atmosphere is still large. Many challenges and limitations were identified in the methods used, presentation of data, aerodynamic processes facilitating atmospheric transport, and scarcity of research in spatially and temporally diverse contexts. The review concluded that there was a greater need for globalization of research, methods and data standardization, and emphasizes the potential for future research with atmospheric transportation modelling and thermochemical analysis.

Polystyrene nanoplastics as an ecotoxicological hazard: cellular and transcriptomic evidences on marine and freshwater in vitro teleost models

The contamination of marine and freshwater environments by nanoplastics is considered a global threat for aquatic biota. Taking into account the most recent concentration range estimates reported globally and recognizing a knowledge gap in polystyrene nanoplastics (PS-NPs) ecotoxicology, the present work investigated the harmful effects of 20 nm and 80 nm PS-NPs, at increasing biological complexity, on the rainbow trout Oncorhynchus mykiss RTG-2 and gilthead seabream Sparus aurata SAF-1 cell lines. Twenty nm PS-NPs exerted a greater cytotoxicity than 80 nm ones and SAF-1 were approximately 4-fold more vulnerable to PS-NPs than RTG-2. The engagement of PS-NPs with plasma membranes was accompanied by discernible uptake patterns and morphological alterations along with a nuclear translocation already within a 30-min exposure. Cells were structurally damaged only by the 20 nm PS-NPs in a time-dependent manner as indicated by distinctive features of the execution phase of the apoptotic cell death mechanism such as cell shrinkage, plasma membrane blebbing, translocation of phosphatidylserine to the outer leaflet of the cell membrane and DNA fragmentation. At last, functional analyses unveiled marked transcriptional impairment at both sublethal and lethal doses of 20 nm PS-NPs, with the latter impacting the "Steroid biosynthesis", "TGF-beta signaling pathway", "ECM-receptor interaction", "Focal adhesion", "Regulation of actin cytoskeleton" and "Protein processing in endoplasmic reticulum" pathways. Overall, a distinct ecotoxicological hazard of PS-NPs at environmentally relevant concentrations was thoroughly characterized on two piscine cell lines. The effects were demonstrated to depend on size, exposure time and model, emphasizing the need for a comparative evaluation of endpoints between freshwater and marine ecosystems.

Environmental risk substances in soil on seed germination: Chemical species, inhibition performance, and mechanisms

Nowadays, numerous environmental risk substances in soil worldwide have exhibited serious germination inhibition of crop seeds, posing a threat to food supply and security. This review provides a comprehensive summary and discussion of the inhibitory effects of environmental risk substances on seed germination, encompassing heavy metals, microplastics, petroleum hydrocarbons, salinity, phenols, essential oil, agricultural waste, antibiotics, etc. The impacts of species, concentrations, and particle sizes of various environmental risk substances are critically investigated. Furthermore, three primary inhibition mechanisms of environmental risk substances are elucidated: hindering water absorption, inducing oxidative damage, and damaging seed cells/organelles/cell membranes. To address these negative impacts, diverse effective coping measures such as biochar/compost addition, biological remediation, seed priming, coating, and genetic modification are proposed. In brief, this study systematically analyzes the negative effects of environmental risk substances on seed germination, and provides a basis for the comprehensive understanding and future implementation of efficient treatments to address this significant challenge and ensure food security and human survival.

Microplastic coupled with soil dissolved organic matter mediated changes in the soil chemical and microbial characteristics

The abundance of microplastics (MPs) in soil environments has attracted significant attentions, due to their impact on soil physico-chemical properties. However, limited information is available on the influences of MPs on soil carbon composition and microbial utilization characteristics. Therefore, a two-month incubation experiment was conducted to add polyethylene microplastics (PE-MPs) with different levels (1%, 10%) and sizes (150-300 μm and 75-150 μm) into different soils. After that, soil chemical properties including the dissolved organic carbon (DOC), spectral characteristics of dissolved organic matter (DOM) and soil microbial characteristics were analyzed. Results revealed that PE-MPs addition caused significant differences in soil chemical properties between farmland and woodland soils, particularly in soil pH, DOM composition, and soil phosphatase activity. Woodland soil always exhibited higher levels of DOC content, microbial diversity, and soil carbon source utilization compared to farmland soil, leading to increased humification in the DOM of woodland soil. PE-MPs with a larger particle size significantly increased both the soil DOC content and enzyme activity. Addition of PE-MPs altered the soil DOM composition, and the fluorescence parameters like the biological index (BIX) and humification degree. Moreover, the carbon source utilization intensity of microorganisms on PE MPs-contaminated soils is higher in woodland soils. Various analyses confirmed that compared to other soil properties, characteristics of soil DOM had a more significant impact on soil microbial community composition. Thus, PE-MPs in conjunction with soil DOM spectral characteristics regulated soil microbial diversity, which is crucial for understanding soil carbon sequestration.

Microplastic accumulation in groundwater: Data-scaled insights and future research

Given that microplastics (MPs) in groundwater have been concerned for risks to humans and ecosystems with increased publications, a Contrasting Analysis of Scales (CAS) approach is developed by this study to synthesize all existing data into a hierarchical understanding of MP accumulation in groundwater. Within the full data of 386 compiled samples, the median abundance of MPs in Open Groundwater (OG) and Closed Groundwater (CG) were 4.4 and 2.5 items/L respectively, with OG exhibiting a greater diversity of MP colors and larger particle sizes. The different pathways of MP entry (i.e., surface runoff and rock interstices) into OG and CG led to this difference. At the regional scale, median MP abundance in nature reserves and landfills were 17.5 and 13.4 items/L, respectively, all the sampling points showed high pollution load risk. MPs in agricultural areas exhibited a high coefficient of variation (716.7%), and a median abundance of 1.0 items/L. Anthropogenic activities at the regional scale are the drivers behind the differentiation in the morphological characteristics of MPs, where groundwater in residential areas with highly toxic polymers (e.g., polyvinylchloride) deserves prolonged attention. At the local scale, the transport of MPs is controlled by groundwater flow paths, with a higher abundance of MP particles downstream than upstream, and MPs with regular surfaces and lower resistance (e.g., pellets) are more likely to be transported over long distances. From the data-scaled insight this study provides on the accumulation of MPs, future research should be directed towards network-based observation for groundwater-rich regions covered with landfills, residences, and agricultural land.

The exploitation of bio-electrochemical system and microplastics removal: Possibilities and perspectives

Microplastic (MP) pollution has caused severe concern due to its harmful effect on human beings and ecosystems. Existing MP removal methods face many obstacles, such as high cost, high energy consumption, low efficiency, release of toxic chemicals, etc. Thus, it is crucial to find appropriate and sustainable methods to replace common MP removal approaches. Bio-electrochemical system (BES) is a sustainable clean energy technology that has been successfully applied to wastewater treatment, seawater desalination, metal removal, energy production, biosensors, etc. However, research reports on BES technology to eliminate MP pollution are limited. This paper reviews the mechanism, hazards, and common treatment methods of MP removal and discusses the application of BES systems to improve MP removal efficiency and sustainability. Firstly, the characteristics and limitations of common MP removal techniques are systematically summarized. Then, the potential application of BES technology in MP removal is explored. Furthermore, the feasibility and stability of the potential BES MP removal application are critically evalauted while recommendations for further research are proposed.

Microplastics and Co-pollutants in Soil and Marine Environments: Sorption and Desorption Dynamics in Unveiling Invisible Danger and Key to Ecotoxicological Risk Assessment

Microplastics (MPs) and their co-pollutants pose significant threats to soil and marine environments, necessitating understanding of their colonization processes to combat the plastic pandemic and protect ecosystems. MPs can act as invisible carriers, concentrating and transporting pollutants, leading to a more widespread and potentially toxic impact than the presence of either MPs or the pollutants alone. Analyzing the sorption and desorption dynamics of MPs is crucial for understanding pollutants amplification and predicting the fate and transport of pollutants in soil and marine environments. This review provides an in-depth analysis of the sorption and desorption dynamics of MPs, highlighting the importance of considering these dynamics in ecotoxicological risk assessment of MPs pollution. The review identifies limitations of current frameworks that neglect these interactions and proposes incorporating sorption and desorption data into robust frameworks to improve the ability to predict ecological risks posed by MPs and co-pollutants in soil and marine environments. However, failure to address the interplay between sorption and desorption can result in underestimation of the true impact of MPs and co-pollutants, affecting livelihoods and agro-employments, and exacerbate poverty and community disputes (SDGs 1, 2, 3, 8, 9, and 16). It can also affect food production and security (SDG 2), life below water and life on land (DSGs 14 and 15), cultural practices, and natural heritage (SDG 11.4). Hence, it is necessary to develop new approaches to ecotoxicological risk assessment that consider sorption and desorption processes in the interactions between the components in the framework to address the identified limitations.

Mechanism of microplastics effects on the purification of heavy metals in piggery effluents by microalgae

Microalgae is an effective bioremediation technique employed for treating piggery effluent. However, there is insufficient study on how the presence of microplastics (MPs) in wastewater affects the ability of microalgae to remove heavy metals from piggery effluent. This study aims to investigate the influence of two prevalent heavy metals found in piggery wastewater, Cu2+ (2 mg/L) and Zn2+ (2 mg/L), on their removal by microalgae (Desmodesmus sp. CHX1) in the presence of four types of MPs: polyethylene (PE), polyvinyl chloride (PVC), polypropylene (PP), and polyethylene terephthalate (PET). The results revealed that smaller particle size MPs promoted chlorophyll accumulation, while larger particles inhibits it. Additionally, higher concentrations of MPs promoted chlorophyll accumulation, while lower concentrations inhibited it. As for heavy metals, the presence of microplastics reduced the removal efficiency of Cu2+ and Zn2+ by Desmodesmus sp. CHX1. The highest inhibition of Cu2+ was 30%, 10%, 19%, and 16% of the control (CK), and the inhibition of Zn2+ was 7%, 4%, 4%, and 13%, respectively, under the treatments of PE, PVC, PP and PET MPs. Furthermore, Desmodesmus sp. CHX1 can secrete more extracellular polymeric substances (EPS) and form heterogeneous aggregates with MPs to counteract their pressure. These findings elucidate the impact of MPs on microalgae in bioremediation settings and offer useful insights into the complex relationships between microalgae, MPs, and heavy metals in the environment.

Ecological effect of microplastics on soil microbe-driven carbon circulation and greenhouse gas emission: A review

Soil organic carbon (SOC) pool, the largest part of terrestrial ecosystem, controls global terrestrial carbon balance and consequently presented carbon cycle-climate feedback in climate projections. Microplastics, (MPs, <5 mm) as common pollutants in soil ecosystems, have an obvious impact on soil-borne carbon circulation by affecting soil microbial processes, which play a central role in regulating SOC conversion. In this review, we initially presented the sources, properties and ecological risks of MPs in soil ecosystem, and then the differentiated effects of MPs on the component of SOC, including dissolved organic carbon, soil microbial biomass carbon and easily oxidized organic carbon varying with the types and concentrations of MPs, the soil types, etc. As research turns into a broader perspective, greenhouse gas emissions dominated by the mineralization of SOC coming into view since it can be significantly affected by MPs and is closely associated with soil microbial respiration. The pathways of MPs impacting soil microbes-driven carbon conversion include changing microbial community structure and composition, the functional enzyme's activity and the abundance and expression of functional genes. However, numerous uncertainties still exist regarding the microbial mechanisms in the deeper biochemical process. More comprehensive studies are necessary to explore the affected footprint and provide guidance for finding the evaluation criterion of MPs affecting climate change.

Compounding one problem with another? A look at biodegradable microplastics

Environmental concerns about microplastics (MPs) have motivated research of their sources, occurrence, and fate in aquatic and soil ecosystems. To mitigate the environmental impact of MPs, biodegradable plastics are designed to naturally decompose, thus reducing the amount of environmental plastic contamination. However, the environmental fate of biodegradable plastics and the products of their incomplete biodegradation, especially micro-biodegradable plastics (MBPs), remains largely unexplored. This comprehensive review aims to assess the risks of unintended consequences associated with the introduction of biodegradable plastics into the environment, namely, whether the incomplete mineralization of biodegradable plastics could enhance the risk of MBPs formation and thus, exacerbate the problem of their environmental dispersion, representing a potentially additional environmental hazard due to their presumed ecotoxicity. Initial evidence points towards the potential for incomplete mineralization of biodegradable plastics under both controlled and uncontrolled conditions. Rapid degradation of PLA in thermophilic industrial composting contrasts with the degradation below 50 % of other biodegradables, suggesting MBPs released into the environment through compost. Moreover, degradation rates of <60 % in anaerobic digestion for polymers other than PLA and PHAs suggest a heightened risk of MBPs in digestate, risking their spread into soil and water. This could increase MBPs and adsorbed pollutants' mobilization. The exact behavior and impacts of additive leachates from faster-degrading plastics remain largely unknown. Thus, assessing the environmental fate and impacts of MBPs-laden by-products like compost or digestate is crucial. Moreover, the ecotoxicological consequences of shifting from conventional plastics to biodegradable ones are highly uncertain, as there is insufficient evidence to claim that MBPs have a milder effect on ecosystem health. Indeed, literature shows that the impact may be worse depending on the exposed species, polymer type, and the ecosystem complexity.

A multivariate analysis of microplastics in soils along the headwaters of Yangtze river on the Tibetan Plateau

Microplastics (MPs) are among the most widespread anthropogenic pollutants of natural environments, while limited research has focused on the fate of MPs in soils along the Plateau rivers. In this study, we investigated MPs in soils along the source areas of the Yangtze River on the Qinghai-Tibet Plateau. The results showed mean MP abundance values of (89.4 ± 51.0) and (64.4 ± 24.5) items/kg of dry soils around the tributary and mainstream areas, respectively. Film, transparent colors, and polyethylene were common shape, color, and compositions, respectively. The correlation analysis and PCA revealed that MP abundance was related to soil heavy metals (Cr and Ni) and nutrients (TOC and TP) (p < 0.05). Structural equation modeling also revealed that population density was the dominant driving factor contributing to MPs, with a total effect coefficient of 0.45. In addition, the conditional fragmentation model further distinguished the differences in MP sources from upstream to downstream along the Jinsha River. The significant sources of MPs in the bare land and grasslands from the upper reaches of the Jinsha River included traffic, tourism, and atmospheric transport. In contrast, MP transport during farming activities mainly contributed to MPs in the agricultural soil in the lower reaches.

Anthropogenic and biological activities elevate microplastics pollution in headwater ecosystem of Yangtze tributaries in Hindu Kush-Himalayan region

Microplastic (MP) pollution is widely spread in oceans, freshwater, and terrestrial environments but MPs in mountainous headwater ecosystem are rarely reported. This study focuses on the headwater of Yangtze tributaries of the Hindu Kush-Himalayan (HKH) region. Five streams at elevations of 900 to 3300 m were selected to investigate the distribution of MPs in water and sediments across altitudes. MPs were found in all water and sediment samples from top stream zone nearly in absence of anthropogenic activity, low anthropogenic zone, and high anthropogenic zone, increased from 12-54, 81-185 to 334-847 items/L, and 2-35, 26-84 to 124-428 items/kg, respectively. This elevation-dependent MP distribution indicated that as elevation decreased, anthropogenic activities intensified and increased MPs input and their abundance, size, and diversity. Notably, hydraulic projects, such as damming, were identified as potential barriers to the migration of MPs downstream. Microbiome analyses revealed the presence of bacterial genes associated with plastic biodegradation in all sediment samples. The study indicates that Shangri-la mountainous streams have been polluted with MPs for years with potential risk of generation of nano-sized particles via natural fragmentation and biodegradation, and thus raises concern on MPs pollution in headwaters streams in mountainous regions.

Biochar immobilized hydrolase degrades PET microplastics and alleviates the disturbance of soil microbial function via modulating nitrogen and phosphorus cycles

Microplastics (MPs) pose an emerging threat to soil ecological function, yet effective solutions remain limited. This study introduces a novel approach using magnetic biochar immobilized PET hydrolase (MB-LCC-FDS) to degrade soil polyethylene terephthalate microplastics (PET-MPs). MB-LCC-FDS exhibited a 1.68-fold increase in relative activity in aquatic solutions and maintained 58.5 % residual activity after five consecutive cycles. Soil microcosm experiment amended with MB-LCC-FDS observed a 29.6 % weight loss of PET-MPs, converting PET into mono(2-hydroxyethyl) terephthalate (MHET). The generated MHET can subsequently be metabolized by soil microbiota to release terephthalic acid. The introduction of MB-LCC-FDS shifted the functional composition of soil microbiota, increasing the relative abundances of Microbacteriaceae and Skermanella while reducing Arthobacter and Vicinamibacteraceae. Metagenomic analysis revealed that MB-LCC-FDS enhanced nitrogen fixation, P-uptake and transport, and organic-P mineralization in PET-MPs contaminated soil, while weakening the denitrification and nitrification. Structural equation model indicated that changes in soil total carbon and Simpson index, induced by MB-LCC-FDS, were the driving factors for soil carbon and nitrogen transformation. Overall, this study highlights the synergistic role of magnetic biochar-immobilized PET hydrolase and soil microbiota in degrading soil PET-MPs, and enhances our understanding of the microbiome and functional gene responses to PET-MPs and MB-LCC-FDS in soil systems.

Nano-based remediation strategies for micro and nanoplastic pollution

Due to rapid urbanization, there have been continuous environmental threats from different pollutants, especially from microplastics. Plastic products rapidly proliferate significantly contributing to the occurrence of micro-plastics, which poses a significant environmental risk. These microplastics originated from diverse sources and are characterized by their persistent and widespread occurrence; human health and the entire ecosystem are adversely affected by them. The removal of microplastics not only requires innovative technologies but also efficient materials capable of effectively eliminating them from our environment. The progress made so far has highlighted the advantages of utilizing the dimensional and structural properties of nanomaterials to increase the effectiveness of existing methods for micro-plastic treatment, aiming for a more sustainable approach to their removal. In the current review, we demonstrate a thorough overview of the sources, occurrences, and potential harmful effects of microplastics, followed by a further discussion of promising technologies used for their removal. An in-depth examination of both advantages and a few limitations of all these given technologies, including physical, chemical, and biological approaches, has been discussed. Additionally, the review explores the use of nanomaterials as an effective means to overcome obstacles and improve the efficiency of microplastic elimination methods. n conclusion, this review addresses, current challenges in this field and outlines the future perspectives for further research in this domain.

Martini-Based Coarse-Grained Soil Organic Matter Model Derived from Atomistic Simulations

The significance of soil organic matter (SOM) in environmental contexts, particularly its role in pollutant adsorption, has prompted an increased utilization of molecular simulations to understand microscopic interactions. This study introduces a coarse-grained SOM model, parametrized within the framework of the versatile Martini 3 force field. Utilizing models generated by the Vienna Soil Organic Matter Modeler 2, which constructs humic substance systems from a fragment database, we employed Swarm-CG to parametrize the fragments and subsequently assembled them into macromolecules. Direct Boltzmann inversion (DBI) facilitated the determination of bonded parameters between fragments. The parametrization yielded favorable agreement in the radius of gyration and solvent-accessible surface area. Transfer free energies exhibited a strong correlation with hexadecane-water and chloroform-water values, albeit deviations were noted for octanol-water values. Comparing densities of modeled Leonardite humic acid systems at coarse-grained and atomistic levels revealed promising agreement, particularly at higher water concentrations. The DBI approach effectively reproduced average values of bonded interactions between fragments. Radial distribution functions between carboxylate groups and calcium ions showed partial agreement, however, reproducing certain peaks was challenging due to fixed bead sizes. Detailed analysis of atomistic systems revealed different configurations between the groups, explaining discrepancies. The present contribution provides a comprehensive insight into the properties, strengths, and weaknesses of the coarse-grained SOM model, serving as a foundation for future investigations encompassing pollutant interactions and varied SOM compositions.

Enhancing the coagulation process for the removal of microplastics from water by anionic polyacrylamide and natural-based Moringaoleifera

The existence of microplastics (MPs) in water is a significant global concern since they have the potential to pose a threat to human health. Therefore, there is a need to develop a sustainable treatment technology for MPs removal, as the conventional methods are inadequate to address this problem. Coagulation is a typical process in treatment plants that can capture MPs before releasing them into the environment. In this work, the removal behaviors of polyamide (PA), polystyrene (PS), and polyethylene (PE) MPs were systematically investigated through coagulation processes using aluminum sulfate (Al2(SO4)3) and Moringa oleifera (MO) seeds extract. Subsequently, the coagulation performance of Al2(SO4)3 was improved by the separate addition of anionic polyacrylamide (APAM) and naturally derived MO. Results showed that Al2(SO4)3 in combination with APAM had better performance than Al2(SO4)3 or MO alone. In the Al2(SO4)3+APAM system, the removal efficiencies were 93.47%, 81.25%, and 29.48% for PA, PS, and PE MPs, respectively. Furthermore, the effectiveness of the Al2(SO4)3 and MO blended system was approximately similar to the Al2(SO4)3+APAM system. However, the required amount of Al2(SO4)3 was decreased to 50% in the Al2(SO4)3+MO system compared to the optimal dosage in the Al2(SO4)3 system alone. The combination of 40 mg/L of Al2(SO4)3 and 60 mg/L of MO resulted in removal efficiencies of 92.99%, 80.48%, and 28.94% for PA, PS, and PE MPs, respectively. The high efficacy of these enhanced methods was due to the synergic effects of charge neutralization and agglomeration adsorption, which were validated through zeta potential assessments and visual analysis using scanning electron microscopy (SEM) images. In the case of experimental conditions, initial pH had little impact on removal efficiency, while NaCl salinity and stirring speed directly affected MPs removal. Consequently, this research took a step toward finding a green strategy to remove MPs from water systems.

Experimental Study on the Migration and Distribution of Microplastics in Desert Farmland Soil Under Drip Irrigation

The microplastics (MPs) formed by broken plastic film may migrate in the soil under drip irrigation. To investigate the migration distribution of MPs in desert farmland soil under drip irrigation conditions, our study was conducted on farmland in Xinjiang (China). A MP drip irrigation penetration migration testing device was set up in combination with Xinjiang farmland irrigation methods to conduct a migration simulation experiment. The results showed that the migration amount of MPs in soil was significantly positively correlated with the amount of drip irrigation, and significantly negatively correlated with the soil depth; in addition, the relationship between the migration amount of MPs in different types of soil was: clay < sandy loam < sandy soil. Under drip irrigation conditions, the migration rates of MPs were 30.51%, 19.41%, and 10.29% in sandy soil, sandy loam soil, and clay, respectively. The migration ability of these three particle sizes of polyethylene MPs in soil was ranked as follows: 25 to 147 μm > 0 to 25 μm > 147 to 250 μm. When the drip irrigation volume was 2.6 to 3.2 L, horizontal migration distances of MPs exceeded 5 cm, and vertical migration distances reached more than 30 cm. Our findings provide reference data for the study of soil MP migration. Environ Toxicol Chem 2024;43:1250-1259. © 2024 SETAC.

Quantitative detecting low concentration polystyrene nanoplastics in aquatic environments via an Ag/Nb2CTx (MXene) SERS substrate

In this study, the plasmonic Ag nanoparticles (Ag NPs) were uniformly anchored on the high conductivity Nb2CTx (MXene) nanosheets to construct an Ag/Nb2CTx substrate for surface-enhanced Raman spectroscopy (SERS) detection of polystyrene (PS) nanoplastics. The KI addition (0.15 mol/L), the volume ratio between substrate colloid and nanoplastic suspension (2:1), and the mass ratio of Nb2CTx in substrate (14%) on SERS performance were optimized. The EM hot spots of Ag/Nb2CTx are significantly enlarged and enhanced, elucidated by FDFD simulation. Then, the linear relationship between the PS nanoplastics concentration with three different sizes (50, 300, and 500 nm) and the SERS intensity was obtained (R2 > 0.976), wherein, the detection limit was as low as 10-4 mg/mL for PS nanoplastic. Owing to the fingerprint feature, the Ag/Nb2CTx-14% substrate successfully discerns the mixtures from two-component nanoplastics. Meanwhile, it exhibits excellent stability of PS nanoplastics on different detection sites. The recovery rates of PS nanoplastics with different sizes in lake water ranged from 94.74% to 107.29%, with the relative standard deviation (RSD) ranging from 2.88% to 8.30%. Based on this method, the expanded polystyrene (EPS) decomposition behavior was evaluated, and the PS concentrations in four water environments were analyzed. This work will pave the way for the accurate quantitative detection of low concentration of nanoplastics in aquatic environments.

Degradation of microplastic in water by advanced oxidation processes

Plastic products have gained global popularity due to their lightweight, excellent ductility, high durability, and portability. However, out of the 8.3 billion tons of plastic waste generated by human activities, 80% of plastic waste is discarded due to improper disposal, and then transformed into microplastic pollution under the combined influence of environmental factors and microorganisms. In this comprehensive study, we present a thorough review of recent advancements in research on the source, distribution, and effect of microplastics. More importantly, we conducted deep research on the catalytic degradation technologies of microplastics in water, including advanced oxidation and photocatalytic technologies, and elaborated on the mechanisms of microplastics degradation in water. Besides, various strategies for mitigating microplastic pollution in aquatic ecosystems are discussed, ranging from policy interventions, the initiative for plastic recycling, the development of efficient catalytic materials, and the integration of multiple technological approaches. This review serves as a valuable resource for addressing the challenge of removing microplastic contaminants from water bodies, offering insights into effective and sustainable solutions.

Microplastics as carriers of antibiotic resistance genes and pathogens in municipal solid waste (MSW) landfill leachate and soil: a review

Landfill leachate contains antibiotic resistance genes (ARGs) and microplastics (MPs), making it an important reservoir. However, little research has been conducted on how ARGs are enriched on MPs and how the presence of MPs affects pathogens and ARGs in leachates and soil. MPs possess the capacity to establish unique bacterial populations and assimilate contaminants from their immediate surroundings, generating a potential environment conducive to the growth of disease-causing microorganisms and antibiotic resistance genes (ARGs), thereby exerting selection pressure. Through a comprehensive analysis of scientific literature, we have carried out a practical assessment of this topic. The gathering of pollutants and the formation of dense bacterial communities on microplastics create advantageous circumstances for an increased frequency of ARG transfer and evolution. Additional investigations are necessary to acquire a more profound comprehension of how pathogens and ARGs are enriched, transported, and transferred on microplastics. This research is essential for evaluating the health risks associated with human exposure to these pollutants.

Graphical Abstract

Assessing the aging and environmental implications of polyethylene mulch films in agricultural land

Polyethylene mulch films (MFs) are widely employed in agricultural land to enhance crop yield and quality, but the MF residue causes significant environmental concerns. To promote the sustainable application of MFs, it is essential to assess their fate throughout their service life and understand the underlying degradation mechanisms. In this study, surface-exposed and soil-buried MFs were separately collected from agricultural land in Inner Mongolia, China. The variations in aging performance and corresponding property alterations of MF were thoroughly examined. The results indicated that sunlight exposure considerably hastens MF degradation, whereas buried MFs experience a more moderate aging process due to the inhibitory effects of the dark and anaerobic environment on oxidation. Surface cracking was observed in MF-Light samples as a result of photodegradation, while chemical and moisture interactions with soil caused partial perforation in MF-Soil samples. Relative to the pristine MF, the oxidation, unsaturation, and hydroxylation levels of MF-Light increased to 0.88, 0.35, and 0.73, respectively, with corresponding values for MF-Soil at 0.44, 0.13, and 0.24. The generated oxygen-containing functional groups lead to a decrease in contact angles of MF-Light and MF-Soil, enhancing their hydrophilicity. The aging process of MFs led to a decline in mechanical properties, posing challenges for recycling. Moreover, nearly all phthalate esters (PAEs) were released from MFs, regardless of sunlight exposure or soil burial. The use of MFs also impacted the abundance of soil microbial communities. Specifically, the selected polyethylene MF enriched Actinobacteriota by 75%, while reducing Chloroflexi and Firmicutes by 27% and 45%, respectively.

Invasion of Trifolium repens L. aggravated by biodegradable plastics: adjustable strategy for foraging N and P

The invasion of alien plant and the pollution caused by soil microplastics have emerged as significant ecological threats. Recent studies have demonstrated aggravating effect of non-biodegradable microplastics on plant invasion. However, the impact of biodegradable microplastics (BMPs) on plant invasion remains unclear. Therefore, it is imperative to explore the impact of BMPs on plant invasion. In this study, a 30-day potting experiment with Trifolium repens L. (an invasive plant) and Oxalis corniculata L. (a native plant) was conducted to evaluate the influence of BMPs on T. repens's invasion. The findings revealed that BMPs results in a reduction in available N and P contents, thereby facilitating the colonization of arbuscular mycorrhizal fungi on T. repens 's roots. Consequently, T. repens adjusted its N and P foraging strategy by increasing P absorption ratio, and enhancing the accumulation of N and P in leaves. This ultimately led to the decrease of relative neighbor effect index of T. repens, indicating an aggravated invasion by T. repens. This study significantly enhances and expands the understanding of mechanisms by which microplastics aggravate plant invasion.

Microplastics/nanoplastics in porous media: Key factors controlling their transport and retention behaviors

Till now, microplastics/nano-plastics(M/NPs) have received a lot of attention as emerging contaminant. As a typical but complex porous medium, soil is not only a large reservoir of M/NPs but also a gateway for M/NPs to enter groundwater. Therefore, the review of the factors controlling the transport behavior of M/NPs in porous media can provide important guidance for the risk assessment of M/NPs in soil and groundwater. In this study, the key factors controlling the transport behavior of M/NPs in porous media are systematically divided into three groups: (1) nature of M/NPs affecting M/NPs transport in porous media, (2) nature of flow affecting M/NPs transport in porous media, (3) nature of porous media affecting M/NPs transport. In each group, the specific control factors for M/NPs transport in porous media are discussed in detail. In addition to the above factors, some substances (colloids or pollutants) present in natural porous media (such as soil or sediments) will co-transport with M/NPs and affect its mobility. According to the different properties of co-transported substances, the mechanism of promoting or inhibiting the migration behavior of M/NPs in porous media was discussed. Finally, the limitations and future research directions of M/NPs transport in porous media are pointed out. This review can provide a useful reference for predicting the transport of M/NPs in natural porous media.

Dual roles of goethite coating on the transport of plastic nanoparticles in heterogeneous porous media: The significance of collector surface roughness

This study systematically examines the roles of positive goethite on the retention and release of negative plastic nanoparticles (PSNPs) with different surface functional groups (Blank, -COOH, and -NH2). It provides the first evidence for the dual roles of goethite coatings on colloid transport; e.g., increased transport caused by surface morphology modification or decreased transport due to increased surface roughness and charge heterogeneity. Although previous work has shown that goethite-coated sand increases the retention of negative colloids, this work demonstrates that collector surface roughness can also reduce the retention of PSNPs due to increased interaction energy profiles. Nonmonotonic retention of all the different functionalized PSNPs was observed in goethite-coated rough sand, and the magnitude of variations was contingent on the PSNP functionalization, the solution ionic strength (IS), and the goethite coating. The release of PSNPs with IS decrease (phase I) and pH increase (phase II) varied significantly due to differences in energy barriers to detachment, e.g., release in phase I was inhibited in both goethite-coated sands, whereas release in phase II was enhanced in coated smooth sand but completely inhibited in rough sand. The findings of this study provide innovative insight into transport mechanisms for colloidal and colloid-associated contaminants.

Impact of polyvinyl chloride (PVC) microplastic on growth, photosynthesis and nutrient uptake of Solanum lycopersicum L. (Tomato)

Microplastics (MPs) pollution and their impact on plants have become a global threat, but their effect at the molecular level remains scarce. This study aims to gain insight into the effects of polyvinylchloride microplastic (PVC-MP) on tomato plants at the genetic and protein levels. In this study, we found that increasing concentrations of PVC-MP (2.5, 5,7.5, and 10% w/w) in the soil did not cause any phytotoxic (chlorosis or necrosis) symptoms but it did result in a dose-dependent reduction in plant growth-related parameters, such as height, leaf area, stem diameter, and plant fresh and dry weight. Additionally, the number of secondary roots was reduced while the primary roots were elongated. Furthermore, PVC-MP also caused a significant decrease in light-harvesting pigments chlorophylls, and carotenoids while increasing the level of reactive oxygen species (ROS) and lipid peroxidation in plants. Microscopic analysis of the roots revealed the uptake of PVC-MP of size less than 10 μm. Micro- and macro-element analysis showed changes in concentrations of Ca, Cu, Fe, Mg, Mn, Ni, and Zn, upon PVC-MP exposure. Results from western blotting and q-PCR showed that higher doses of PVC-MP significantly reduced the CO2-fixing enzyme RuBisCO and D1 proteins of PSII at both protein and transcript levels. These findings suggest that lower levels of light-harvesting pigments, D1 protein, RuBisCO, and modulation of nutrient absorption are among the factors responsible for growth suppression in tomato plants upon exposure to PVC-MP. As tomato plants are economically significant crops, an increase in PVC-MP in agricultural fields may have a detrimental influence on crop production, resulting in economic loss.

The long-term release and particle fracture behaviors of nanoplastics retained in porous media: Effects of surfactants, natural organic matters, antibiotics, and bacteria

The transport of nanoplastics (NPs) in porous media has received a lot of attention, but the studies on the long-term release of NPs retained in porous media and the particle fracture during this process are seriously lacking. For filling this deficiency, we examined the individual or synergistic effects of surfactants, natural organic matters (NOMs), antibiotics, and bacteria on the desorption, long-term release, and particle fracture behaviors of polystyrene NPs (PS-NPs) retained in porous media. It was found that the change in hydrophilicity of PS-NPs dominated the long-term release of PS-NPs retained in porous media when surfactants were present. In the single system of surfactants and the dual system of surfactants and NOMs, the release of PS-NPs were improved owing to the increasing hydrophilicity of PS-NPs, although cationic surfactants also reduced the electrostatic repulsion between PS-NPs and porous media. Increasing antibiotic concentration reduced the electrostatic repulsion between PS-NPs and porous media to inhibit the release of PS-NPs. When bacteria were present whether containing antibiotics or not, the effects on roughness of PS-NPs dominated the release of PS-NPs. The effects of surfactants and NOMs on the PS-NP desorption were similar with the long-term release, with changes in hydrophilicity dominating the process. Whereas the effects of antibiotics and bacteria on the PS-NP desorption were different with the long-term release. Surfactants and NOMs in the presence of surfactants inhibited the fracture of PS-NPs by increasing the hydrophilicity of PS-NPs brought about the coating of water molecules on PS-NPs for protection. Antibiotics had no significant effects on the fracture of PS-NPs due to unaltered vertical forces on PS-NPs and no protective effect. Bacteria in the presence or absence of antibiotics inhibited the fracture of PS-NPs by coating PS-NPs retained in porous media to protect PS-NPs from fracture.

Considering microplastic characteristics in ecological risk assessment: A case study for China

Microplastics (MPs) pose a significant global concern, requiring a multifaceted approach to their risk assessment procedures, especially concerning their characteristics in the environment. The Horqin Left Middle Banner in Northeast China was chosen for the research region to investigate the abundance, composition, distribution, and ecological impact of MPs in surface agricultural soils. The concentrations of MPs ranged from 300 to 12800 items/kg, with a median concentration of 1550 items/kg (average = 1994 items/kg). The normal-sized MPs (500-5000 µm) had a higher relative abundance than small MPs (<500 µm). MPs were mainly derived from textiles and packaging and were affected by atmospheric transportation. Rayon and PET fibers were the main polymers identified. Furthermore, the potential environmental risks posed by the fundamental characteristics (abundance, chemical composition, and size) of MPs were quantified using multiple risk assessment models. The conditional fragmentation model indicated a propensity for MPs to degrade into smaller particles. Ecological risk assessments using pollution load index, pollution hazard index, and potential ecological risk index models revealed varying levels of risk. This study conducted a comprehensive assessment of the ecological risks of MPs based on their environmental characteristics, emphasizing the importance of considering multiple factors in the risk assessment process. ENVIRONMENT IMPLICATION: This study investigates the occurrence, distribution, and ecological risk of microplastics (MPs) in agricultural soils of the Northeast Plain of China, a major food production area. MPs are persistent organic pollutants that can pose threats to soil health, crop quality, and food security. By analyzing the composition, size, and source of MPs, as well as their fragmentation and stability in soil, this study provides valuable data for assessing the environmental risk of MPs in agricultural regions. The study also suggests strategies for mitigating MPs pollution and protecting soil ecosystems.

The release, degradation, and distribution of PVC microplastic-originated phthalate and non-phthalate plasticizers in sediments

This study investigated the leaching of phthalate and non-phthalate plasticizers from polyvinyl chloride microplastics (MPs) into sediment and their degradation over a 30-d period via abiotic and biotic processes. The results showed that 3579% of plasticizers were released into the sediment from the MPs and > 99.9% degradation was achieved. Although a significantly higher degradation was found in plasticizer-added microcosms under biotic processes (overall, 94%), there was a noticeable abiotic loss (72%), suggesting that abiotic processes also play a role in plasticizer degradation. Interestingly, when compared with the initial sediment-water partitioning for plasticizers, the partition constants for low-molecular-weight compounds decreased in both microcosms, whereas those for high-molecular-weight compounds increased after abiotic degradation. Furthermore, changes in the bacterial community, abundance of plasticizer-degrading bacterial populations, and functional gene profiles were assessed. In all the microcosms, a decrease in bacterial community diversity and a notable shift in bacterial composition were observed. The enriched potential plasticizer-degrading bacteria were Arthrobacter, Bacillus, Desulfovibrio, Desulfuromonas, Devosia, Gordonia, Mycobacterium, and Sphingomonas, among which Bacillus was recognized as the key plasticizer degrader. Overall, these findings shed light on the factors affecting plasticizer degradation, the microbial communities potentially involved in biodegradation, and the fate of plasticizers in the environment.

Plastics in biogenic matrices intended for reuse in agriculture and the potential contribution to soil accumulation

The spread of biogenic matrices for agricultural purposes can lead to plastic input into soils, raising a question on possible consequences for the environment. Nonetheless, the current knowledge concerning the presence of plastics in biogenic matrices is very poor. Therefore, the objective of the present study was a quali-quantitative characterization of plastics in different matrices reused in agriculture as manures, digestate, compost and sewage sludges. Plastics were quantified and characterized using a Fourier Transform Infrared Spectroscopy coupled with an optical microscope (μFT-IR) in Attenuated Total Reflectance mode. Our study showed the presence of plastics in all the investigated samples, albeit with differences in the content among the matrices. We measured a lower presence in animal matrices (0.06-0.08 plastics/g wet weight w.w.), while 3.14-5.07 plastics/g w.w. were measured in sewage sludges. Fibres were the prevalent shape and plastic debris were mostly in the micrometric size. The most abundant polymers were polyester (PEST), polypropylene (PP) and polyethylene (PE). The worst case was observed in the compost sample, where 986 plastics/g w.w. were detected. The majority of these plastics were compostable and biodegradable, with only 8% consisting of fragments of PEST and PE. Our results highlighted the need to thoroughly evaluate the contribution of reused matrices in agriculture to the plastic accumulation in the soil system.

Effects of microplastics on soil microorganisms and microbial functions in nutrients and carbon cycling - A review

The harmful effects of microplastics (MPs) pollution in the soil ecosystem have drawn global attention in recent years. This paper critically reviews the effects of MPs on soil microbial diversity and functions in relation to nutrients and carbon cycling. Reports suggested that both plastisphere (MP-microbe consortium) and MP-contaminated soils had distinct and lower microbial diversity than that of non-contaminated soils. Alteration in soil physicochemical properties and microbial interactions within the plastisphere facilitated the enrichment of plastic-degrading microorganisms, including those involved in carbon (C) and nutrient cycling. MPs conferred a significant increase in the relative abundance of soil nitrogen (N)-fixing and phosphorus (P)-solubilizing bacteria, while decreased the abundance of soil nitrifiers and ammonia oxidisers. Depending on soil types, MPs increased bioavailable N and P contents and nitrous oxide emission in some instances. Furthermore, MPs regulated soil microbial functional activities owing to the combined toxicity of organic and inorganic contaminants derived from MPs and contaminants frequently encountered in the soil environment. However, a thorough understanding of the interactions among soil microorganisms, MPs and other contaminants still needs to develop. Since currently available reports are mostly based on short-term laboratory experiments, field investigations are needed to assess the long-term impact of MPs (at environmentally relevant concentration) on soil microorganisms and their functions under different soil types and agro-climatic conditions.

Physiological and biochemical effects of polystyrene micro/nano plastics on Arabidopsis thaliana

Microplastics have garnered global attention due to their potential ecological risks. Research shows micro/nano-plastics pollution has adverse effects on plant growth, development, and physiological characteristics. However, the mechanisms underlying these effects remain unclear. The study examined the effects of polystyrene micro/nano-plastics with varying sizes and concentrations on different physiological and biochemical markers of A. thaliana. The indicators assessed include seed viability, growth, chlorophyll content, accumulation of root reactive oxygen species, and root exudates. Using fluorescence labeling, we investigated the absorption and translocation processes of micro/nano-plastics in A. thaliana. We also performed transcriptomic analysis to better understand the particular mechanisms of micro/nano-plastics. It indicated that micro/nano-plastics had an adverse effect on seed germination, especially under high concentration and small particle size treatments. This effect diminished with prolonged exposure. High concentrations at 50 nm and 100 nm treatment groups significantly inhibited the growth. Conversely, low concentrations of 1000 nm had a promoting effect. Exposure to micro/nano-plastics potentially resulted in decreased chlorophyll content, the accumulation of H2O2 in roots, and stimulated root secretion of oxalic acid. Through transcriptomic analysis, the gene expression linked to micro/nano-plastic treatments of varying sizes enriched multiple metabolic pathways, impacting plant growth, development, environmental adaptation, metabolism, pigment synthesis, and stress response.

Effects of combined microplastic and cadmium pollution on sorghum growth, Cd accumulation, and rhizosphere microbial functions

The interaction between microplastics (MPs) and cadmium (Cd) poses a threat to agricultural soil environments, and their effects on plant growth and rhizosphere microbial community functions are not yet clear. In this study, energy sorghum was used as a test plant to investigate the effects of two types of MPs, polystyrene (PS) and polyethylene (PE), at different particle sizes (13 μm, 550 μm) and concentrations (0.1%, 1% w/w), and Cd, as well as their interactions, on the growth of sorghum in a soil-cultivation pot experiment. The results showed that the combined effects of MP and Cd pollution on the dry weight and Cd accumulation rate in sorghum varied depending on the type, concentration, and particle size of the MPs, with an overall trend of increasing stress from combined pollution with increasing Cd content and accumulation. High-throughput sequencing analysis revealed that combined MP and Cd pollution increased bacterial diversity, and the most significant increase was observed in the abundance-based coverage estimator (ACE), Shannon, and Sobs indices in the 13 μm 1% PS+Cd treatment group. Metagenomic analysis based on the Kyoto Encyclopedia of Genes and Genomes (KEGG) metabolic pathways revealed that 19 groups of metabolic pathways, including microbial metabolism and methane metabolism, differed significantly under combined MP and Cd pollution. Hierarchical clustering results indicated that Cd treatment and combined MP and Cd treatment affected the abundances of sorghum rhizosphere soil nitrogen (N) and phosphorus (P) cycling genes and that the type of MP present was an important factor affecting N and P cycling genes. The results of this study provide a basis for exploring the toxic effects of combined MP and Cd pollution and for conducting soil environmental risk assessments.

Effects of tire wear particles on the water retention of soils with different textures in the full moisture range

Tire wear particles (TWPs) are significant contributors to microplastic pollution in the environment, yet there is limited scientific information concerning their impact on soil hydraulic properties. This study aimed to investigate the impact of TWPs at different concentrations (1, 4, 8, and 16% of the air-dried mass of packed soil samples, w/w) on the water retention curves (WRC) of southern California soils with five different textures (clay, clay loam, silt loam, sandy loam, and loamy sand). The concentrations of 8% and 16% were selected to represent extreme pollution scenarios that might occur near highway corridors. High-resolution water retention data, spanning from saturation to oven dryness, were generated using HYPROP™ and WP4C dew point meter instruments. We also developed WRC scaling equations based on the quantity of TWPs. The bulk density of the samples decreased as the TWP concentration in soils increased. The inclusion of very high concentrations of TWPs (8% and 16% w/w) led to a significant reduction in soil moisture content in the intermediate and dry ranges across various soil textures. However, at the same moisture range, adding 1% TWPs had a minimal impact on soil moisture reduction, while the influence of the 4% TWPs concentration treatment was noticeable only in loamy sand and partially in clay loam soils. Additionally, the overall plant available water decreased with increasing TWP concentrations, except for the clay soil. The texture-specific scaling models exhibited promising performance, with RMSE values ranging from 0.0061 to 0.0120 cm3 cm-3. When bulk density was included as an additional input predictor to construct a single scaling model for all textures, the RMSE increased. Nevertheless, it still indicated a good fit ranging from 0.007 to 0.024 cm3 cm-3, highlighting the suitability of simple scaling for identifying WRC in TWPs-polluted soils, particularly for practical purposes. The findings of this study can contribute to a better understanding and quantification of the impact of TWPs on soil hydrology.

Efficient degradation of polystyrene microplastic pollutants in soil by dielectric barrier discharge plasma

In this study, the atmospheric dielectric barrier discharge (DBD) plasma was proposed for the degradation of polystyrene microplastics (PS-MPs) for the first time, due to its ability to generate reactive oxygen species (ROS). The local temperature in plasma was found to play a crucial role, as it enhanced the degradation reaction induced by ROS when it exceeded the melting temperature of PS-MPs. Factors including applied voltage, air flow rate, and PS-MPs concentration were investigated, and the degradation products were analyzed. High plasma energy and adequate supply of ROS were pivotal in promoting degradation. At 20.1 kV, the degradation efficiency of PS-MPs reached 98.7% after 60 min treatment, with gases (mainly COx, accounting for 96.4%) as the main degradation products. At a concentration of 1 wt%, the PS-MPs exhibited a remarkable conversion rate of 90.6% to COx, showcasing the degradation performance and oxidation degree of this technology. Finally, the degradation mechanism of PS-MPs combined with the detection results of ROS was suggested. This work demonstrates that DBD plasma is a promising strategy for PS-MPs degradation, with high energy efficiency (8.80 mg/kJ) and degradation performance (98.7% within 1 h), providing direct evidence for the rapid and comprehensive treatment of MP pollutants.

Effects of single and combined exposure of virgin or aged polyethylene microplastics and penthiopyrad on zebrafish (Danio rerio)

The interaction between pesticides and microplastics (MPs) can lead to changes in their mode of action and biological toxicity, creating substantial uncertainty in risk assessments. Succinate dehydrogenase inhibitor (SDHI) fungicides, a common fungicide type, are widely used. However, little is known about how penthiopyrad (PTH), a member of the SDHI fungicide group, interacts with polyethylene microplastics (PE-MPs). This study primarily investigates the individual and combined effects of virgin or aged PE-MPs and penthiopyrad on zebrafish (Danio rerio), including acute toxicity, bioaccumulation, tissue pathology, enzyme activities, gut microbiota, and gene expression. Short-term exposure revealed that PE-MPs enhance the acute toxicity of penthiopyrad. Long-term exposure demonstrated that PE-MPs, to some extent, enhance the accumulation of penthiopyrad in zebrafish, leading to increased oxidative stress injury in their intestines by the 7th day. Furthermore, exposure to penthiopyrad and/or PE-MPs did not result in histopathological damage to intestinal tissue but altered the gut flora at the phylum level. Regarding gene transcription, penthiopyrad exposure significantly modified the expression of pro-inflammatory genes in the zebrafish gut, with these effects being mitigated when VPE or APE was introduced. These findings offer a novel perspective on environmental behavior and underscore the importance of assessing the combined toxicity of PE-MPs and fungicides on organisms.

Microplastic generation from field-collected plastic gauze: Unveiling the aging processes

Accumulation of plastic debris in the environment is a matter of global concern. As plastic ages, it generates microplastic (MP) particles with high mobility. Understanding how MPs are generated is crucial to controlling this emerging contaminant. In this study, we utilized high-density polyethylene (HDPE) plastic gauze, collected from urban settings, as a representative example of plastic waste. The plastic gauze was subjected to various aging conditions, including freeze-thaw cycling, mechanical abrasion, and UV irradiation. Following aging, the plastic gauze was rinsed with water, and the number of generated MPs were quantified. It was found that aged plastic gauze generated up to 334 million MP particles per m2 (> 10 µm) during rinsing, a number two orders of magnitude higher than unaged plastic. Fragmentation occurred in two dimensions for bulk MPs of all morphotypes. However, specific aging approaches (i.e., mechanical abrasion and UV irradiation) generated spheres and fibers via pseudo-3D fragmentation. Additionally, changes in molecular weight, size distribution, and surface oxidation characteristics unveiled a complex pattern (i.e., irregular changes with exposure time). This complexity underscores the intricate nature of plastic debris aging processes in the environment.

Polyester biodegradability: importance and potential for optimisation

To reduce global CO2 emissions in line with EU targets, it is essential that we replace fossil-derived plastics with renewable alternatives. This provides an opportunity to develop novel plastics with improved design features, such as better reusability, recyclability, and environmental biodegradability. Although recycling and reuse of plastics is favoured, this relies heavily on the infrastructure of waste management, which is not consistently advanced on a worldwide scale. Furthermore, today's bulk polyolefin plastics are inherently unsuitable for closed-loop recycling, but the introduction of plastics with enhanced biodegradability could help to combat issues with plastic accumulation, especially for packaging applications. It is also important to recognise that plastics enter the environment through littering, even where the best waste-collection infrastructure is in place. This causes endless environmental accumulation when the plastics are non-(bio)degradable. Biodegradability depends heavily on circumstances; some biodegradable polymers degrade rapidly under tropical conditions in soil, but they may not also degrade at the bottom of the sea. Biodegradable polyesters are theoretically recyclable, and even if mechanical recycling is difficult, they can be broken down to their monomers by hydrolysis for subsequent purification and re-polymerisation. Additionally, both the physical properties and the biodegradability of polyesters are tuneable by varying their building blocks. The relationship between the (chemical) structures/compositions (aromatic, branched, linear, polar/apolar monomers; monomer chain length) and biodegradation/hydrolysis of polyesters is discussed here in the context of the design of biodegradable polyesters.

Can low-temperature thermal hydrolysis mitigate the oxidative stress of polystyrene nanoplastics on anaerobic digestion?

The presence of micro/nanoplastics (MPs/NPs) in sewage sludge has sparked considerable apprehensions over their potential negative effects on anaerobic digestion (AD) performance. The occurrence of MPs/NPs can trigger oxidative stress on the anaerobic microbiome, leading to potential inhibition of the AD process. While the thermal hydrolysis process (THP) is an extensively utilized sludge pretreatment method for AD, its impact on stress induced by MPs/NPs during AD remains poorly understood. In this study, we assessed the impacts of low-temperature THP (90 °C, 90 min) on AD of sewage sludge in the presence of 150 μg/L of polystyrene nanoplastics (PsNPs) under different solid retention times (SRTs) of 20, 15, and 10 d. The presence of PsNPs resulted in a higher reactive oxygen species (ROS) production and a higher abundance of antibiotic resistance genes (ARGs). Additionally, their presence caused a significant inhibition of methane production by 28.2%, 29.3%, and 38.8% for SRTs of 20, 15, and 10 d, respectively. Introducing low-temperature THP prior to the AD could partially recover methane production by mitigating ROS-induced stress and curbing the propagation of ARGs during the AD process. These results shed light on the potential benefits of THP and further optimization opportunities in alleviating the adverse effects of MPs/NPs-induced stress during sewage sludge AD.

Plastics in the environment in the context of UV radiation, climate change and the Montreal Protocol: UNEP Environmental Effects Assessment Panel, Update 2023

This Assessment Update by the Environmental Effects Assessment Panel (EEAP) of the United Nations Environment Programme (UNEP) considers the interactive effects of solar UV radiation, global warming, and other weathering factors on plastics. The Assessment illustrates the significance of solar UV radiation in decreasing the durability of plastic materials, degradation of plastic debris, formation of micro- and nanoplastic particles and accompanying leaching of potential toxic compounds. Micro- and nanoplastics have been found in all ecosystems, the atmosphere, and in humans. While the potential biological risks are not yet well-established, the widespread and increasing occurrence of plastic pollution is reason for continuing research and monitoring. Plastic debris persists after its intended life in soils, water bodies and the atmosphere as well as in living organisms. To counteract accumulation of plastics in the environment, the lifetime of novel plastics or plastic alternatives should better match the functional life of products, with eventual breakdown releasing harmless substances to the environment.

Microplastics removal mechanisms in constructed wetlands and their impacts on nutrient (nitrogen, phosphorus and carbon) removal: A critical review

Microplastics (MPs) are now prevalent in aquatic ecosystems, prompting the use of constructed wetlands (CWs) for remediation. However, the interaction between MPs and CWs, including removal efficiency, mechanisms, and impacts, remains a subject requiring significant investigation. This review investigates the removal of MPs in CWs and assesses their impact on the removal of carbon, nitrogen, and phosphorus. The analysis identifies crucial factors influencing the removal of MPs, with substrate particle size and CWs structure playing key roles. The review highlights substrate retention as the primary mechanism for MP removal. MPs hinder plant nitrogen uptake, microbial growth, community composition, and nitrogen-related enzymes, reducing nitrogen removal in CWs. For phosphorus and carbon removal, adverse effects of MPs on phosphorus elimination are observed, while their impact on carbon removal is minimal. Further research is needed to understand their influence fully. In summary, CWs are a promising option for treating MPs-contaminated wastewater, but the intricate relationship between MPs and CWs necessitates ongoing research to comprehend their dynamics and potential consequences.

Polylactic acid microplastics have stronger positive effects on the qualitative traits of rice (Oryza sativa L.) than polyethylene microplastics: Evidence from a simulated field experiment

Soil pollution by microplastics (MPs) from different types of agricultural films has received substantial attention due to its potential effects on crop quality. To date, the effects of different types of MPs on rice grain quality and their underlying molecular mechanisms have not been clarified. In this study, we examined the effects of polyethylene MPs (PE-MPs) and biodegradable polylactic acid MPs (PLA-MPs) on rice grain quality at the environmental level (0.5 %) and evaluated the molecular mechanism through transcriptome analysis. PE- and PLA-MPs increased the number of rice grains per plant by 19.83 % and 24.66 %, respectively, and decreased the rice empty-shell rate by 55.89 % and 26.53 %, respectively. However, PLA-MPs increased the 1000-seed weight by 11.37 %, whereas PE-MPs had no obvious impact in this respect. Furthermore, MP exposure, especially that of PE-MPs, affected the content of mineral elements, fatty acids, and amino acids of rice grains by disturbing the expression of genes related to these functions and metabolism. Our findings provide insights into the response of rice grains to the stress caused by different MPs.

Tracking the micro- and nanoplastics in the terrestrial-freshwater food webs. Bivalves as sentinel species

Micro- (MPs) and nanoplastics (NPs) are currently ubiquitous in the ecosystems, and freshwater biota is still insufficiently studied to understand the global fate, transport paths, and consequences of their presence. Thus, in this study, we investigated the role of bivalves and a trophic transfer of MPs and NPs in an experimental food chain. The food chain consisted of terrestrial non-selective detritivore Dendrobaena (Eisenia) sp., freshwater benthic filter feeder Unio tumidus, and freshwater benthic detritivore-collectors Asellus aquaticus or Gammarus sp. Animals were exposed to different fluorescently labeled micro- and nanoplastics (PMMA 20 μm, nanoPS 15-18 nm, and 100 nm, PS 1 μm and 20 μm, PE from cosmetics) as well as to the faeces of animals exposed to plastics to assess their influence on the environmental transportation, availability to biota, and bioaccumulation of supplied particles. Damaged and intact fluorescent particles were observed in the faeces of terrestrial detritivores and in the droppings of aquatic filter feeders, respectively. They were also present in the guts of bivalves and of crustaceans which were fed with bivalve droppings. Bivalves (Unio tumidus, and additionally Unio pictorum, and Sphaerium corneum) produced droppings containing micro- and nanoparticles filtered from suspension and deposited them onto the tank bottom, making them available for broader feeding guilds of animals (e.g. collectors, like crustaceans). Finally, the natural ageing of PS and its morphological changes, leakage of the fluorescent labelling, and agglomeration of particles were demonstrated. That supports our hypothesis of the crucial role of the characterization of physical and chemical materials in adequately understanding the mechanisms of their interaction with biota. Microscopical methods (confocal, fluorescent, scanning electron) and Raman and FT-IR spectroscopy were used to track the particles' passage in a food web and monitor structural changes of the MPs' and NPs' surface.

Dosage and exposure time effects of two micro(nono)plastics on arbuscular mycorrhizal fungal diversity in two farmland soils planted with pepper (Capsicum annuum L.)

As emerging environmental pollutants, micro(nano)plastics (MPs) like polyethylene terephthalate (PET) and low-density polyethylene (LDPE) have adverse effects on terrestrial biota and ecosystem function. However, the performance and roles of soil arbuscular mycorrhizal (AM) fungi in MPs-contaminated vegetable fields are poorly understood. Thus, a 120-day pot experiment was conducted to test the impacts of two input levels of either PET (~13 μm) or LDPE (~500 nm) on AM fungal diversity and pepper (Capsicum annuum L.) growth in two farmland soils collected from Nanjing (NJ) and Chongqing (CQ), respectively. In the vast majority of cases, 1 % rather than 0.1 % of both MPs greatly decreased the observed richness, Shannon and Simpson's indices, and Pielou's evenness of AM fungi, and decreased mycorrhizal colonization, root and shoot biomasses, fruit yield, and leaf superoxide dismutase, peroxidase, and catalase activities of pepper, while increased leaf malondialdehyde content. From day 40 to 120, the inhibition of either diversity or vitality of AM fungi by 1 % and 0.1 % of MPs gradually increased and weakened, respectively. Compared with PET, LDPE with substantially smaller particle size was more toxic to mycorrhization at day 40, but no longer at day 120. Almost all plant parameters significantly correlated to mycorrhizal colonization, which significantly correlated to both Shannon and Simpson's indices of AM fungi, and soil pH, available P and K concentrations, and alkaline phosphatase activity. All diversity indices of AM fungi clearly negatively correlated to soil pH from 4.4 to 5.6 for the NJ soil and from 5.3 to 6.5 for the CQ soil, and also positively to mineral N and negatively to available P concentrations for the NJ and CQ soils, respectively. Thus, the study emphasized that high input of MPs significantly inhibited soil AM fungal diversity and vitality and thereby vegetable growth via changing soil pH and major nutrient availability.

Comparison of ATR-FTIR and NIR spectroscopy for identification of microplastics in biosolids

Biosolids are considered a potentially major input of microplastics (MPs) to agricultural soils. Our study aims to identify the polymeric origin of MPs extracted from biosolid samples by comparing their Attenuated Total Reflection (ATR) - Fourier-transform infrared (FTIR) spectra with the corresponding near-infrared (NIR) spectra. The reflectance spectra were preprocessed by Savitzky-Golay (SG), first derivative (FD) and compared with analogous spectra acquired on a set of fifty-two selected commercial plastic (SCP) materials collected from readily available products. According to the results portrayed in radar chart and built from both ATR-FTIR and NIR spectral datasets, the MPs showed high correlations with polymers such as polyethylene (LDPE, HDPE), polyethylene terephthalate (PET), polystyrene (PS), polypropylene (PP) and polyamide (PA), determined in SCP samples. Each unknown MP sample had on average three or more links to several types of SCP, according to the correlation coefficients for each polymer ranging from 0.7 up to 1. The comparison analysis classified the majority of MPs as composed mainly by LDPE/HDPE, according to the top correlation coefficients (r > 0.90). PP and PET were better identified with NIR than ATR-FTIR. In contrast to ATR-FTIR analysis, NIR was unable to identify PS. Based on these results, the primary sources of MPs in the biosolids could be identified as discarded consumer packaging (containers, bags, bottles) and fibers from laundry, disposable glove, and cleaning cloth. SYNOPSIS: Microplastics (MPs) are considered contaminants of emerging concern. This study compares two simple and fast spectroscopy techniques to identify microplastics in the biosolid matrix.

Identification and visualization of environmental microplastics by Raman imaging based on hyperspectral unmixing coupled machine learning

Microplastics (MPs) are ubiquitous contaminants that have become an emerging pollutant of concern, potentially threatening human health and ecosystem environments. Although current detection methods can accurately identify various types of MPs, it remains necessary to develop non-destructive and rapid methods to meet growing demands for detection. Herein, we combine a hyperspectral unmixing method and machine learning to analyse Raman imaging data of environmental MPs. Five MPs types including poly(butylene adipate-co-terephthalate) (PBAT), poly(butylene succinate) (PBS), p-polyethylene (PE), polystyrene (PS) and polypropylene (PP) were visualized and identified. Individual or mixed pure or aged MPs along with environmental samples were analysed by Raman imaging. Alternating volume maximization (AVmax) combined with unconstrained least squares (UCLS) method estimated end members and abundance maps of each of the MPs in the samples. Pearson correlation coefficients (r) were used as the evaluation index; the results showed that there is a high similarity between the raw spectra and the average spectra calculated by AVmax. This indicates that Raman imaging based on machine learning and hyperspectral unmixing is a novel imaging analysis method that can directly identify and visualize MPs in the environment.

Effects of polystyrene, polyethylene, and polypropylene microplastics on the soil-rhizosphere-plant system: Phytotoxicity, enzyme activity, and microbial community

The widespread presence of soil microplastics (MPs) has become a global environmental problem. MPs of different properties (i.e., types, sizes, and concentrations) are present in the environment, while studies about the impact of MPs having different properties are limited. Thus, this study investigated the effects of three common polymers (polystyrene, polyethylene, and polypropylene) with two concentrations (0.01% and 0.1% w/w) on growth and stress response of lettuce (Lactuca sativa L.), soil enzymes, and rhizosphere microbial community. Lettuce growth was inhibited under MPs treatments. Moreover, the antioxidant system, metabolism composition, and phyllosphere microbiome of lettuce leaves was also perturbed. MPs reduced phytase activity and significantly increased dehydrogenase activity. The diversity and structure of rhizosphere microbial community were disturbed by MPs and more sensitive to polystyrene microplastics (PSMPs) and polypropylene microplastics (PPMPs). In general, the results by partial least squares pathway models (PLS-PMs) showed that the presence of MPs influenced the soil-rhizosphere-plant system, which may have essential implications for assessing the environmental risk of MPs.

Antibiotics and microplastics in manure and surrounding soil of farms in the Loess Plateau: Occurrence and correlation

The wide use of animal manure in farmland operations is a source of soil nutrients. However, the return of manure affected antibiotics and microplastics in the soil, thus the potential ecological risks cannot be overlooked. This study investigated the distribution of different antibiotics and microplastics and their correlation. It was found that multiple classes of veterinary antibiotics and microplastics could be detected simultaneously in most manure and soil. In manure, the average concentration of tetracycline antibiotics was higher than fluoroquinolones and sulfonamides. A much lower concentration of antibiotics was found in the soil samples relative to manure. The abundance of microplastics ranged from 21,333 to 88,333 n/kg in manure, and the average abundance was 50,583 ± 24,318 n/kg. The average abundance was 3056 ± 1746 n/kg in the soil. It confirmed that applying organic fertilizer to agricultural soil and the application of plastic mulch in farmlands introduced microplastics. Moreover, microplastics were found to be significantly correlated with antibiotics (r = 0.698, p < 0.001). The correlation between microplastics and antibiotics in soil was significantly weaker than that in manure. Farms could be the hotspot for the co-spread of microplastics and antibiotics. These findings highlighted the co-occurrence of antibiotics and microplastics in agricultural environments.

Micro- and nano-plastics in the atmosphere: A review of occurrence, properties and human health risks

The ubiquitous occurrence of micro/nano plastics (MNPs) poses potential threats to ecosystem and human health that have attracted broad concerns in recent decades. Detection of MNPs in several remote regions has implicated atmospheric transport as an important pathway for global dissemination of MNPs and hence as a global health risk. In this review, the latest research progress on (1) sampling and detection; (2) origin and characteristics; and (3) transport and fate of atmospheric MNPs was summarized. Further, the current status of exposure risks and toxicological effects from inhaled atmospheric MNPs on human health is examined. Due to limitations in sampling and identification methodologies, the study of atmospheric nanoplastics is very limited today. The large spatial variation of atmospheric MNP concentrations reported worldwide makes it difficult to compare the overall indoor and outdoor exposure risks. Several in vitro, in vivo, and epidemiological studies demonstrate adverse effects of immune response, apoptosis and oxidative stress caused by MNP inhalation that may induce cardiovascular diseases and reproductive and developmental abnormalities. Given the emerging importance of atmospheric MNPs, the establishment of standardized sampling-pretreatment-detection protocols and comprehensive toxicological studies are critical to advance environmental and health risk assessments of atmospheric MNPs.