The surfactant-ionic liquid bi-functionalization of chitosan beads for their adsorption performance improvement toward Tartrazine

Quaternized cross-linked peach gum polysaccharide as an adsorbent for fast and selective removal of anionic dyes from aqueous solution

To overcome low adsorption capacity, slow adsorption rate, poor adsorption selectivity, and dissolution of peach gum polysaccharide (PGP), an amino-rich crosslinked PGP (ACPGP) was first synthesized by cross-linking highly soluble PGP. Subsequently, a cation-rich PGP (QCPGP) was prepared from ACPGP through the addition of glycidyltrimethyl ammonium chloride (GTAC) and a secondary quaternization. The step-by-step preparation process was confirmed, and the adsorption properties of PGP, ACPGP, and QCPGP were compared in detail. The adsorption of crude PGP for cationic dyes violet (MV, 135.0 mg/g) and methylene blue (MB, 121.4 mg/g) were spontaneous endothermic, following the pseudo-first-order kinetic model and D-R isotherm. Due to the presence of rich charged groups in their structure, their highly selective adsorption towards new coccine (NC) and tartrazine (TTZ) is spontaneous and endothermic, and can be described by the pseudo-first-order and pseudo-second-order kinetic models, respectively. According to the Langmuir isotherm, the Qm of ACPGP and QCPGP for NC and TTZ was calculated to be 876.2 and 1304.3 mg/g (NC), and 814.5 and 1136.7 mg/g (TTZ), respectively. QCPGP exhibited more advantages in terms of adsorption capacity, adsorption rate (equilibrium time of 10 min), environmental stability, adsorption selectivity, and regeneration efficiency, showing great potential in practical wastewater treatment applications.

Facile fabrication of shape-controllable and reusable nanoporous catalytic aerogels based on Co-MOF and agarose for efficient decomposition of organic pollutants in water

Sulfate radical (SO4•-)-based advanced oxidation processes (SR-AOPs) have been studied to date by utilizing metal-organic frameworks as efficient catalysts to generate sulfate radicals by peroxymonosulfate (PMS) activation in water purification. It is important to select high-performance and reliable catalysts for efficient water remediation, and separation and recovery of catalysts are essential in the practical application of MOFs. Herein, we adapted thermally curable, shape-controllable, and cost-effective agarose (AG) as a smart matrix and ZIF-67, as a powerful catalyst to prepare nanoarchitectured aerogel (Z67@AG). This nanoporous aerogel composite can efficiently generate sulfate radicals and hydroxyl radicals by activating PMS in the nanopores. Z67@AG aerogel could be easily fabricated in various molds to make desired shapes. This approach enables its utilization for different filtering systems and demonstrates cost-effective and stable performance by mass production and reusability. In the SR-AOP, aerogel exhibited excellent catalytic decomposition performances of 95 % and 88 % efficiencies within 8 and 10 min for dye and levofloxacin, respectively. It is believed that the proposed highly catalytic nanoporous aerogel nanocomposite having cost-effectiveness, excellent catalytic activity, facile fabrication of desired shapes, and an excellent porous structure can be extended to the synthesis of various nanocomposites and emerging applications.

Bioinspired hierarchical and dual-morphology humic-acid/pectin/chitosan composite aerogels for efficient removal of pollutants from wastewater

How to solve the contradiction between the efficiency and adsorption rate of porous materials in adsorbing pollutants has always been one of the focus issues. In this study, the small landscape cypress trees structure like biomimetic of a hierarchical and dual morphology 3D porous HA-based aerogel was designed and synthesized to use humic acid (HA), pectin (PE) and chitosan (CTS) as raw materials, which it was formed by the disorderly overlapping of lamella composed of fiber networks in 3D space. Due to its special microstructure, it can be used like separation membrane, which allowing for rapid adsorption of pollutants in the water while the water flow passes through quick. In general, this work provides a new concept for owning fast adsorption rate and efficient adsorption of porous materials of preparation to use green method.

Eco-friendly property modulation of biobased gels of carboxymethyl cellulose-integrated poly(tertiary amine)s for the removal of azo-food dyes

Anionic polysaccharide-based gels enable the design of biobased materials with biochemical properties, non-toxic and natural origin. A new set of cationic gels was prepared from carboxymethylcellulose (CMC)-doped tertiary amino functional cationic monomers 2-(dimethylamino)ethyl methacrylate and N-(3-(dimethylamino)propyl) methacrylamide via the formation of semi-interpenetrated network (semi-IPN) at different polymerization temperatures, Tprep. A detailed understanding of the temperature-dependent synthesis and physicochemical response is required for the design of interpenetrating networks with CMC as an adsorbent that provides effective sources for the removal of azo-food dyes such as tartrazine and carmoisine from aqueous solutions. The variation of elasticity and swelling properties with respect to polymerization temperature was investigated. CMC-integration and polymerization temperature played a decisive role in the compressive elasticity. Incorporation of CMC into copolymer matrix led to a significant increase in elasticity of semi-IPNs, while mechanically weaker gels were obtained with increasing Tprep. Addition of CMC increased the swelling modulus of semi-IPNs formed at -18 °C by 2.6-fold. While the transparency changed depending on Tprep and microstructure, addition of CMC decreased the swelling rate of gels at all polymerization temperatures. The compressive modulus decreased with the swelling process in accordance with the Rubber elasticity theory. Semi-IPN gels showed stable swelling against pH-change in aqueous solutions and exhibited excellent pH-sensitivity significantly in low pH. A 4 to 12 fold decrease in maximum volume was observed by varying the pH between 2.1 and 9.8. The correlation between polymerization temperature and removal of azo-food dyes; tartrazine and carmoisine from contaminated wastewater with CMC-based gels was studied. Dynamic adsorption equilibrium was reached in 30 min, and tartrazine and carmoisine removal performances varied between 92.8 % and 98.4 %. respectively. The adsorption data for azo-dyes were evaluated by Langmuir, Freundlich, Temkin, Dubinin-Radushkevich, Redlich-Patterson, Sips, and Tooth isotherm models, but were best described by Langmuir and Redlich-Patterson models as they gave the highest correlation. Pseudo-first order, pseudo-second order, Elovich, Avrami kinetic and intra-particle diffusion models were investigated and dye adsorption was represented by pseudo-second-order model. After the adsorption process, semi-IPNs can easily be regenerated and effectively reused over five cycles. The study provided new insights towards the facile and sustainable synthesis of eco-friendly multifunctional CMC-based gels carrying tertiary amino groups for effective removal of azo-based food colorants.

"Three-dimensional environment-friendly" amino acid functionalized chitosan: Uranium adsorption performance and mechanism research

To achieve the goals of "carbon peak and carbon neutrality" and sustainable development, we propose "Three-Dimensional Environment-Friendly" materials to balance the urgent need for the development of clean energy and the reduction of secondary environmental pollution during adsorbent preparation. In this study, three novel chitosan adsorbents (CMNSC-Leu, CMNSC-Pro, CMNSC-Phe) for uranium adsorption were designed on the basis of molecular level and successfully synthesized with three different amino acids (leucine, proline, phenylalanine) through amidation reaction in an aqueous environment using a sustainable green chitosan material. The uranium adsorption capacity of the three adsorbents was evaluated by batch adsorption, selectivity and recyclability studies. The adsorption reaction conformed to the pseudo-second-order model and was a spontaneous endothermic reaction. In particular, the maximum adsorption capacity of CMNSC-Pro for uranium was 462.7 mg·g-1 at C0 = 100 ppm. In addition, CMNSC-Pro showed better selectivity and good reusability. DFT calculation and IRI diagram were applied in this work to analyze the unique structure and adsorption process of CMNSC-Pro from the perspective of structure. Uranium was adsorbed by CMNSC-Pro via coordination, electrostatic interaction, and intraparticle diffusion. This work provided a new idea for the structural design and construction of new high-efficiency biomass adsorbents.

Effective adsorptive removal of Pb2+ ions from aqueous solution using functionalized agri-waste biosorbent: New green mediation via Seidlitzia rosmarinus extract

Currently, the use of natural adsorbent for the elimination of pollutants, such as heavy metals, from water has been extensively investigated. However, the low adsorption capacity of these natural adsorbents has led researchers towards the use of synthetic surfactants, which themselves can become environmental pollutants. In this research, an investigation was conducted to examine the impact of a surfactant obtained from the Seidlitzia rosmarinus plant on the adsorption properties of Pumpkin seed shell (PSS), a natural adsorbent. As a result, a modified version of PSS, known as functionalized Pumpkin seed shell (FPSS), was developed, and the effect of these two adsorbents on the elimination of Pb2+ has been investigated. FESEM, EDS, FTIR, and BET analyses were conducted to get detailed information of the adsorbent. Additionally, the effects of contact time, dosage of the adsorbent, pH of the solution, and temperature on the adsorbent were studied. The experimental data was fitted using Langmuir, Freundlich, Temkin, and Jovanovic isotherms. The PSS adsorbent was fitted best with the Langmuir isotherm, showing an adsorption capacity of 160.80 mg g-1, while the FPSS adsorbent was fitted with the Jovanovic isotherm, exhibiting an adsorption capacity of 553.57 mg g-1. Furthermore, kinetic modeling results indicated that the data for these adsorbents follow pseudo-second-order kinetic. Finally, the impact of coexisting ions and reusability was examined, with the FPSS adsorbent outperforming PSS. Therefore, the investigation of all these aspects demonstrated that the use of this natural surfactant significantly improves the performance of the adsorbent.

Ionic liquids functionalized chitosan: An effective, rapid and green adsorbent for gold recovery

Thiosulfate has been considered as a more environmentally-friendly alternative to cyanide salts for the extraction of gold from gold ores and the development of affordable, green and efficient adsorbents for the isolation of gold-thiosulfate complex (Au(S2O3)23-) from the leaching solution remains a significant challenge. To address this issue, chitosan, a natural macromolecule, was selected as a carrier and chemically modified with ionic liquids. The ionic liquids modified chitosan showed greater adsorption capacity towards Au(S2O3)23- compared with pristine chitosan. The adsorption of Au(S2O3)23- on ionic liquid modified chitosan followed Freundlich isotherm and pseudo-second order kinetic models, involving an anion-exchange mechanism with liquid film diffusion as the rate-limiting step. The chitosan modified with butylimidazolium-based ionic liquid had an adsorption capacity of 5.0 mg g-1 for gold (10 mg L-1 of gold, pH 6, 2 g L-1 of adsorbent dosage), outperforming other reported adsorbents. The ionic liquid modified chitosan showed a high adsorption efficiency of up to 96.7 % for Au(S2O3)23- in an actual thiosulfate leaching solution with a desorption efficiency of 98.4 %, suggesting that the ionic liquid modified chitosan has the potential to be a eco-friendly, biocompatible and effective adsorbent for the recovery of Au(S2O3)23-.

Highly efficient removal of diclofenac sodium with polystyrene supported ionic liquid

ABSTRACTDiclofenac sodium (DS) is now recognized as an emerging pollutant, and is one of the most commonly discovered pharmaceuticals in water due to its extensive application in the clinic. This study examined the adsorption performance of a polystyrene-supported ionic liquid material (PS-[Nim][Cl]) for the removal of diclofenac sodium (DS) from water. The data from this study showed that maximum removal of DS can be achieved even in conditions with significant pH and temperature fluctuations. The adsorption process was rapid, more than 90% of DS could be removed within the first 10 min and adsorption equilibrium could be reached in just 30 min with a high removal efficiency (>99.9%). Adsorption reached saturation with a maximum adsorption capacity of approximately 785.2 mg/g. Moreover, the presence of K+, Na+, Ca2+, Mg2+, Cl-, and H2PO4- ions had little influence on DS adsorption, even when concentrations of these ions were 10,000 times higher than that of DS in water samples. The adsorbent also showed promising performance for the treatment of environmental water samples and groundwater containing DS.

Adsorption potential of ionic liquid-modified ZnO nanoparticles for highly efficient removal of azo dye: detailed isotherms and kinetics

In this study, bare and ionic liquid-modified ZnO nanoparticles have been fabricated using microwave irradiation method. The fabricated nanoparticles were characterized by different techniques, viz. XRD, FT-IR, FESEM, and UV-Visible spectroscopy, and were explored as adsorbent for effective sequestration of azo dye (Brilliant Blue R-250) from aqueous media. Various factors affecting the adsorption efficiency of synthesized nanoparticles (bare/ionic liquid-modified) such as concentration of dye, pH of reaction media, dose of nanoparticles, and reaction time were thoroughly investigated with varying experimental conditions; on a magnetic stirrer and in a sonicator. The results exhibited a high adsorption efficiency of ionic liquid-modified nanoparticles for removal of dye as compared to the bare one. Also, an enhanced adsorption was observed via sonication in comparison with magnetic stirring. Different isotherms such as Langmuir, Freundlich, and Tempkin were elaborated. Evaluation of adsorption kinetics showed a linear pseudo-second-order equation for adsorption process. The exothermic and spontaneous nature of adsorption was further confirmed by thermodynamic investigations. As per the results obtained, it is suggested that the fabricated ionic liquid-modified ZnO nanoparticles could successfully remediate the toxic anionic dye from aqueous media. Hence, this system can be utilized for large-scale industrial applications.

A novel sponge composite of chitosan-sodium tripolyphosphate-melamine for anionic dye Orange II removal

Since the potential carcinogenic, toxic and non-degradable dyes trigger serious environmental contamination by improper treatment, developing novel adsorbents remains a major challenge. A novel high efficiency and biopolymer-based environmental-friendly adsorbent, chitosan‑sodium tripolyphosphate-melamine sponge (CTS-STPP-MS) composite, was prepared for Orange II removing with chitosan as raw material, sodium tripolyphosphate as cross-linking agent. The composite was carefully characterized by SEM, EDS, FT-IR and XPS. The influence of crosslinking conditions, dosage, pH, initial concentration, contacting time and temperature on adsorption were tested through batch adsorption experiments. CTS-STPP-MS adsorption process was exothermic, spontaneous and agreed with Sips isotherm model accompanying the maximum adsorption capacity as 948 mg∙g-1 (pH = 3). Notably, the adsorption performance was outstanding for high concentration solutions, with a removal rate of 97 % in up to 2000 mg∙L-1 OII solution (100 mg sorbent dosage, 50 mL OII solution, pH = 3, 289.15 K). In addition, the adsorption efficiency yet remained 97.85 % after 5 repeated adsorption-desorption cycles. The driving force of adsorption was attributed to electrostatic attraction and hydrogen bonds which was proved by adsorption results coupled with XPS. Owing to the excellent properties of high-effective, environmental-friendly, easy to separate and regenerable, CTS-STPP-MS composite turned out to be a promising adsorbent in contamination treatment.

Facile Fabrication of Porous Adsorbent with Multiple Amine Groups for Efficient and Selective Removal of Amaranth and Tartrazine Dyes from Water

The development of an advanced dye adsorbent that possesses a range of beneficial characteristics, such as high adsorption capacity, swift adsorption kinetics, selective adsorption capability, and robust reusability, remains a challenge. This study introduces a facile method for fabricating an amine-rich porous adsorbent (ARPA), which is specifically engineered for the adsorptive removal of anionic dyes from aqueous solutions. Through a comprehensive assessment, we have evaluated the adsorption performance of ARPA using two benchmark dyes: amaranth (ART) and tartrazine (TTZ). Our findings indicate that the adsorption process reaches equilibrium in a remarkably short timeframe of just 20 min, and it exhibits an excellent correlation with both the Langmuir isotherm model and the pseudo-second-order kinetic model. Furthermore, ARPA has demonstrated an exceptional maximum adsorption capacity, with values of 675.68 mg g-1 for ART and 534.76 mg g-1 for TTZ. In addition to its high adsorption capacity, ARPA has also shown remarkable selectivity, as evidenced by its ability to selectively adsorb TTZ from a mixed dye solution, a feature that is highly desirable for practical applications. Beyond its impressive adsorption capabilities, ARPA can be efficiently regenerated and recycled. It maintains a high level of original removal efficiency for both ART (76.8%) and TTZ (78.9%) even after five consecutive cycles of adsorption and desorption. Considering the simplicity of its synthesis and its outstanding adsorption performance, ARPA emerges as a highly promising material for use in dye removal applications. Consequently, this paper presents a straightforward and feasible method for the production of an effective dye adsorbent for environmental remediation.

Highly efficient and selective removal of anionic dyes from aqueous solutions using polyacrylamide/peach gum polysaccharide/attapulgite composite hydrogels with positively charged hybrid network

To avoid the weakness (lower adsorption rate and selectivity) of peach gum polysaccharide (PGP) and improve the adsorption performance of polyacrylamide (PAAm) hydrogel (lower adsorption capacity), in the present work, the PGP was chemically tailored to afford ammoniated PGP (APGP) and quaternized PGP (QPGP), and attapulgite (ATP) was bi-functionalized with cation groups and carbon‑carbon double bond. Then, PAAm/APGP and PAAm/QPGP/ATP hydrogels were synthesized via redox polymerization. The synthesis procedure and properties of hydrogels were traced by FTIR, SEM, XPS, TGA, TEM, and BET methods, and the dye adsorption performance of the hydrogels was evaluated using the new coccine (NC) and tartrazine (TTZ) aqueous solutions as the model anionic dyes. Effects of initial dye concentration, pH, and ionic strength on the adsorption were investigated. Compared with PAAm/APGP hydrogel, PAAm/APGP/ATP hydrogel exhibits higher adsorption rate, superior adsorption capacity, stability, and selectivity towards anionic dye. The adsorption process of PAAm/QPGP/ATP hydrogel reached equilibrium in about 20 min and followed the pseudo-second-order kinetic model and Langmuir isotherm. The adsorption capacities towards NC and TTZ of PAAm/QPGP/ATP hydrogel were calculated as 873.235 and 731.432 mg/g. This hydrogel adsorbent originating from PAAm, PGP, and ATP shows great promise for application in practical water treatment.

Kinetic and adsorption isotherm studies of Malachite Green dye onto surfactant-tailored alginate hydrogel beads: An influence of surfactant hydrophobicity

This study details the synthesis and characterization of surfactant-modified sodium alginate hydrogel beads crosslinked with Ba2+ ions through ionotropic gelation. Cationic surfactants such as, dodecyltrimethylammonium bromide (DTAB), didodecyldimethylammonium bromide (DDAB), and butanediyl-α,ω-bis-(dimethyldodecylammonium bromide) (GEM), were employed in the modification process. The surfactant-modified ALG-DTAB, ALG-DDAB, and ALG-GEM beads were investigated for the removal of cationic dye Malachite Green (MG) to elucidate the impact of hydrophobicity of amphiphiles on the adsorption process. The characterizations were carried out using Rheometry, Field Emission Scanning Electron Microscopy (FESEM), Infrared Spectroscopy (IR), and Energy Dispersive X-ray Spectroscopy (EDX). Under optimized conditions, ALG-GEM and ALG-DDAB demonstrated highest maximum adsorption capacity (Qmax > 700 mgg-1). The adsorption data fitted well to pseudo-second order kinetic and Langmuir adsorption models, suggesting the involvement of chemisorption phenomena with notable contributions from pore diffusion. The effects of pH, initial dye concentration, adsorbent dose, temperature, and competing ions on the removal of MG were investigated. Interestingly, ALG-GEM beads exhibited an increase in adsorption capacity with rising pH and a subsequent decrease with increasing temperature, showcasing optimal adsorption at pH 7.0 and 25 °C. The study proposes that ALG beads modified with cationic surfactants with higher hydrophobicity could offer a promising avenue in wastewater treatment processes.

Hydrogels Based on Chitosan and Nanoparticles and Their Suitability for Dyes Adsorption from Aqueous Media: Assessment of the Last-Decade Progresses

Water is one of the fundamental resources for the existence of humans and the environment. Throughout time, due to urbanization, expanding population, increased agricultural production, and intense industrialization, significant pollution with persistent contaminants has been noted, placing the water quality in danger. As a consequence, different procedures and various technologies have been tested and used in order to ensure that water sources are safe for use. The adsorption process is often considered for wastewater treatment due to its straightforward design, low investment cost, availability, avoidance of additional chemicals, lack of undesirable byproducts, and demonstrated significant efficacious potential for treating and eliminating organic contaminants. To accomplish its application, the need to develop innovative materials has become an essential goal. In this context, an overview of recent advances in hydrogels based on chitosan and nanocomposites and their application for the depollution of wastewater contaminated with dyes is reported herein. The present review focuses on (i) the challenges raised by the synthesis process and characterization of the different hydrogels; (ii) the discussion of the impact of the main parameters affecting the adsorption process; (iii) the understanding of the adsorption isotherms, kinetics, and thermodynamic behavior; and (iv) the examination of the possibility of recycling and reusing the hydrogels.

Innovative strategies for enhancing gas separation: Ionic liquid-coated PES membranes for improved CO2/N2 selectivity and permeance

As a cost-effective advancement in membrane technology, this study investigates the impact of PEG additive and CBT on the structural, stability, and gas permeance properties of PES-coated membranes, utilizing 1-dodecyl-3-methylimidazolium chloride ionic liquid ([DDMI][Cl] IL) as a carrier liquid. BET and FT-IR analyses highlight the significant enhancement in performance through the immobilization of pores with [DDMIM][Cl] IL. The investigation focuses on PES-M5-coated membranes, revealing excellent stability in finger-like pore structures prepared through direct immersion and nitrogen pressure immobilization. PES-M5-coated membranes with [DDMIM][Cl] IL via direct immersion experience lower weight loss than those coated using nitrogen pressure, with critical pressures at 1.4 and 1.25 bar, respectively. The study identifies PES-coated membranes, particularly PES-M25 (20.88 GPU) with macro-void pores and PES-M5 (29 GPU) with finger-like pores, exhibiting the highest CO2 permeance and CO2/N2 selectivity. As a cost-effective advancement in membrane technology, ionic liquids are employed in support membranes to enhance gas separation. Employing pure PES membranes with varying pore structures, created through the NIPS method, the study immobilizes [DDMI][Cl] IL in membrane pores through nitrogen pressure and direct immersion. Results underscore the successful application of porous support materials coated with ionic liquids for continuous CO2 and sulfur compound separation, showcasing competitive permeability and selectivity compared to traditional polymer membranes.

Chitosan-based hydrogel system for efficient removal of Cu[II] and sustainable utilization of spent adsorbent as a catalyst for environmental applications

The growing requirement for clean potable water requires sustainable methods of eliminating heavy metal ions and other organic contaminants. Herein, we synthesized a novel dual-purpose magnetically separable chitosan-based hydrogel system (CSGO-R@IO) that can efficiently remove toxic Cu2+ pollutants from water. FT-IR, XRD, SEM-EDX, VSM, XPS analyses were used to characterize the synthesized hydrogel. The CSGO-R@IO hydrogel showed high swelling capacity (1036.06 %), prominent adsorption capacity for Cu2+ ions (119.5 mg/g), and good recyclability up to four cycles. The adsorption data of Cu+2 ions on hydrogel fitted better to the Langmuir isotherm model (R2 = 0.9942), indicating spontaneous monolayer adsorption of Cu2+ ions on a homogenous surface. The adsorption kinetic studies fitted better with the pseudo-second-order model (R2 = 0.9992), suggesting that the adsorption process was controlled by chemisorption. We also showed a sustainable way to convert harmful Cu2+ pollutants into valuable Cu nanoparticles for catalysis, and Cu nanoparticles loaded hydrogel (CSGO-R@IO/Cu) had high catalytic activity. Hence, building attractive multipurpose hydrogel systems will give us new ideas about how to design and use new adsorbents to clean water in real life. They will also help in recycle metals (copper and maybe others) to conserve resources.

High adsorption performance for trace lead (II) cation from sewage by Fe/Cu metal organic nanosheets modified with terephthalic acid

A two-dimensional nanoflake (Fe/Cu-TPA) was prepared through a simple ultrasonic-centrifuge method. Fe/Cu-TPA has prominent performance on the removal of Pb²⁺ with low consistences. More than 99% lead (II) (Pb²⁺) was removed. The adsorption equipoise was established within 60 min for 50 mg L^-1 Pb²⁺. Fe/Cu-TPA shows excellent regenerability with 19.04% decline of Pb²⁺ adsorption competence in 5 cycles. There are two models for Fe/Cu-TPA adsorption of Pb²⁺, pseudo-second-order dynamic model and Langmuir isotherm model, with a utmost adsorption competence of 213.56 mg g^-1. This work offers a new candidate material for the industrial-grade Pb²⁺ adsorbents with promising application prospect.

Thermodynamics, kinetics and isothermal studies of tartrazine adsorption onto microcline/MWCNTs nanocomposite and the regeneration potentials

The quest for a cheap, effective, and eco-friendly wastewater treatment technique that is free of secondary toxic byproducts, calls for the fabrication of a nature-friendly adsorbent with a robust capacity to decontaminate polluted water sources and be recycled. To this end, we report the fabrication of novel nanocomposite (KMCM) from microcline (KMC) and multiwall carbon nanotubes (MWCNTs). The adsorbents (KMC and KMCM) were characterized using XRD, BET, SEM, TGA and FTIR. The novel and low-cost nano sorbent were designed for the elimination of tartrazine (Tatz) from wastewater. The adsorption of Tatz onto KMC and KMCM was influenced by adsorbent dose, initial Tatz concentration, contact time and solution pH. Experimental data acquired from the equilibrium studies were well addressed by the Langmuir isotherm model. The maximum uptake capacity of 37.96 mg g^-1 and 67.17 mg g^-1 were estimated for KMC and KMCM. The kinetics for the adsorption of Tatz onto KMC and KMCM was best expressed by pseudo-second-order and Elovich models. The thermodynamic parameters revealed that the uptake of Tatz onto KMC and KMCM was an endothermic (ΔH: KMC = 35.0 kJ mol^-1 and KMCM = 42.91 kJ mol^-1), entropy-driven (ΔS: KMC = 177.6 J K^-1 mol^-1 and KMCM = 214.2 J K^-1 mol^-1) and spontaneous process. Meanwhile, KMCM demonstrated good reusability potential and superior adsorption efficiency when compared to other adsorbents.

Design of separable magnetic chitosan grafted-benzaldehyde for azo dye removal via a response surface methodology: Characterization and adsorption mechanism

In this study, a magnetic chitosan grafted-benzaldehyde (CS-BD/Fe₃O₄) was hydrothermally prepared using benzaldehyde as a grafting agent to produce a promising adsorbent for the removal of acid red 88 (AR88) dye. The CS-BD/Fe₃O₄ was characterized by infrared spectroscopy, surface area analysis, scanning electron microscopy-energy dispersive X-ray, vibrating sample magnetometry, powder X-ray diffraction, CHN elemental analysis, and point of zero charge (pH_PZC). The Box-Behnken design (BBD) was adopted to study the role of variables that influence AR88 dye adsorption (A: CS-BD/Fe₃O₄ dose (0.02-0.1 g), B: pH (4-10), and time C: (10-90 min)). The ANOVA results of the BBD model indicated that the F-value for the AR88 removal was 22.19 %, with the corresponding p-value of 0.0002. The adsorption profiles at equilibrium and dynamic conditions reveal that the Temkin model and the pseudo-first-order kinetics model provide an adequate description of the isotherm results, where the maximum adsorption capacity (qmax) with the AR88 dye was 154.1 mg/g. Several mechanisms, including electrostatic attraction, n-π interaction, π-π interaction, and hydrogen bonding, regulate the adsorption of AR88 dyes onto CS-BD/Fe₃O₄ surface. As a result, this research indicates that the CS-BD/Fe₃O₄ can be utilized as an effective and promising bio-adsorbent for azo dye removal from contaminated wastewater.

Designing the heterostructured FeWO4/FeS2 nanocomposites for an enhanced photocatalytic organic dye degradation

The present study, reports a facile approach for the synthesis of FeWO₄/FeS₂ nanocomposites were demonstrated through hydrothermal method. The surface morphology, crystalline structure, chemical composition, optical properties of the prepared samples was analysed by different various technique. The result observed analysis indicates that, the formation of heterojunction by 2:1 wt.% of FeWO₄/FeS₂ nanohybrid has the lowest recombination rate of electron-hole pairs and the least electron transfer resistance. Due to its the broad absorption spectral range and preferable energy band gap, the (2:1) FeWO₄/FeS₂ nanohybrid photocatalyst exhibits an excellent ability to remove MB dye when exposed to UV-Vis. Light irradiation. Its photocatalytic activity of (2:1) FeWO₄/FeS₂ nanohybrid is higher than other as prepared samples due to its synergistic effects, enhanced light absorption and high charge carrier separation. Radical trapping experimental result implies that the photo-generated free electrons and hydroxyl radials are essential to degrade the MB dye. Furthermore, a possible future mechanism for FeWO₄/FeS₂ nanocomposites photocatalytic activity was discussed. Moreover, the recyclability analysis demonstrated that the FeWO₄/FeS₂ nanocomposites can be recycled multiple times. The enhanced photocatalytic activity of 2:1 FeWO₄/FeS₂ nanocomposites is promising for the further application of visible light driven photocatalyst in wastewater treatment.

Cross-linked chitosan-epichlorohydrin/bentonite composite for reactive orange 16 dye removal: Experimental study and molecular dynamic simulation

Chitosan/bentonite beads (CsB) composites were prepared from chitosan (Cs) and bentonite (B) and cross-linked with epichlorohydrin for removal of reactive orange 16 (RO16) and methylene blue (MB). The adsorption results have shown that the (Cs20B80), 20 % wt of (Cs) and 80 % (B), was selected as the best adsorbent for (MB) and (RO16) dyes. SEM, EDX, FTIR, BET, and pHpzc were implemented to investigate the features of Cs, B, and Cs20B80 samples. The influence of contact time (0-72 h), initial RO16 concentration (15-300 mg/L), temperature (30, 40, and 50 °C), the quantity of adsorbent (1-4 g/L), ion strength (0.1-1 M), and solution pH (3-10) on RO16 adsorption onto Cs20B80 were explored. The pseudo-second-order and the Langmuir models fit adequately the adsorption kinetic results and the isotherms ones respectively. Also, the maximal monolayer capacities calculated using the non-linear form of the Langmuir isotherm are 55.27, 55.29, and 70.80 mg/g, at 30, 40 and 50 °C. Based to the statistical physics model, the RO16 could be retained on the surface of Cs20B80 through a non-parallel orientation. The RO16 adsorption process is endothermic and natural, as demonstrated by thermodynamic studies. After three regeneration cycles, the Cs20B80 composite has shown an adsorption capacity of around 20 % compared to the initial one. The adsorption energy of RO16 onto Cs, B, and Cs20B80 examined using the Monte Carlo simulation method (MC) ranged from -164.8 to -303.7 (kcal/mol), showing the potential of the three adsorbants for RO16 dye. Also, the process of adsorption of RO16 dye on the surface of Cs20B80 composite indicates several kinds of physical interactions, involving electrostatic interaction, hydrogen bonding, and π-π interactions, this finding was proved theoretically via molecular dynamic simulations.

Insight into the adsorptive removal of ibuprofen using porous carbonaceous materials: A review

Over the last decade, the removal of pharmaceuticals from aquatic bodies has garnered substantial attention from the scientific community. Ibuprofen (IBP), a non-steroidal anti-inflammatory drug, is released into the environment in pharmaceutical waste as well as medical, hospital, and household effluents. Adsorption technology is a highly efficient approach to reduce the IBP in the aquatic environment, particularly at low IBP concentrations. Due to the exceptional surface properties of carbonaceous materials, they are considered ideal adsorbents for the IBP removal of, with high binding capacity. Given the importance of the topic, the adsorptive removal of IBP from effluent using various carbonaceous adsorbents, including activated carbon, biochar, graphene-based materials, and carbon nanostructures, has been compiled and critically reviewed. Furthermore, the adsorption behavior, binding mechanisms, the most effective parameters, thermodynamics, and regeneration methods as well as the cost analysis were comprehensively reviewed for modified and unmodified carbonaceous adsorbents. The compiled studies on the IBP adsorption shows that the IBP uptake of some carbon-based adsorbents is significantly than that of commercial activated carbons. In the future, much attention is needed for practical utilization and upscaling of the research findings to aid the management and sustainability of water resource.

Crosslinked modified chitosan biopolymer for enhanced removal of toxic Cr(VI) from aqueous solution

Two new crosslinked modified chitosan biopolymers, namely (CTS-VAN) and (Fe₃O₄@CTS-VAN) bioadsorbents were prepared starting from chitosan and 4-hydroxy-3-methoxybenzaldehyde (VAN) in presence of epichlorohydrin. The analytical techniques FT-IR, EDS, XRD, SEM and XPS besides BET surface analysis were utilized for full characterization of the bioadsorbents. Batch experiments were conducted to study the effect of various influencing parameters in Cr (VI) removal such as initial pH, contact time, adsorbent amount and initial Cr (VI) concentration. The adsorption of Cr (VI) was found out to be maximum at pH = 3 for both bioadsorbents. Langmuir isotherm fit well the adsorption process with a maximum adsorption capacity of 188.68 and 98.04 mg/g for CTS-VAN and Fe₃O₄@CTS-VAN, respectively. The adsorption process followed pseudo second-order kinetics with R² values of 1 and 0.9938 for CTS-VAN and Fe₃O₄@CTS-VAN, respectively. X-ray photoelectron spectroscopy (XPS) analysis showed that Cr(III) accounted for 83 % of the total Cr bound to bioadsorbents surface, which indicated reductive adsorption was responsible for Cr(VI) removal by the bioadsorbents. Cr(VI) was initially adsorbed on the positively charged surface of the bioadsorbents and reduced to Cr(III) by electrons provided by oxygen-comprising functional groups (e.g., CO), and consequently part of the converted Cr(III) stayed on the surface and the rest released into solution.

Effective and Efficient Porous CeO2 Adsorbent for Acid Orange 7 Adsorption

A porous CeO₂ was synthesized following the addition of guanidine carbonate to a Ce³⁺ aqueous solution, the subsequent addition of hydrogen peroxide and a final hydrothermal treatment. The optimal experimental parameters for the synthesis of porous CeO₂, including the amounts of guanidine carbonate and hydrogen peroxide and the hydrothermal conditions, were determined by taking the adsorption efficiency of acid orange 7 (AO7) dye as the evaluation. A template-free hydrothermal strategy could avoid the use of soft or hard templates and the subsequent tedious procedures of eliminating templates, which aligned with the goals of energy conservation and emission reduction. Moreover, both the guanidine carbonate and hydrogen peroxide used in this work were accessible and eco-friendly raw materials. The porous CeO₂ possessed rapid adsorption capacities for AO7 dye. When the initial concentration of AO7 was less than 130 mg/L, removal efficiencies greater than 90.0% were obtained, achieving a maximum value of 97.5% at [AO7] = 100 mg/L and [CeO₂] = 2.0 g/L in the first 10 min of contact. Moreover, the adsorption-desorption equilibrium between the porous CeO₂ adsorbent and the AO7 molecule was basically established within the first 30 min. The saturated adsorption amount of AO7 dye was 90.3 mg/g based on a Langmuir linear fitting of the experimental data. Moreover, the porous CeO₂ could be recycled using a NaOH aqueous solution, and the adsorption efficiency of AO7 dye still remained above 92.5% after five cycles. This study provided an alternative porous adsorbent for the purification of dye wastewater, and a template-free hydrothermal strategy was developed to enable the design of CeO₂-based catalysts or catalyst carriers.

Activated peroxydisulfate by sorghum straw-based biochar for enhanced tartrazine degradation: Roles of adsorption and radical/nonradical processes

Biochar obtained from biomass waste through pyrolysis has significant potential in wastewater treatment due to its large specific surface area and multi-functional active sites. In current study, sorghum straw (SS) was pyrolyzed to prepare various biochar under nitrogen atmosphere. Adsorption kinetics of prepared biochar toward tartrazine (TTZ) was systematically investigated, and the biochar was also characterized by using multiple techniques to explore the contribution of physicochemical properties to adsorption. Then, the biochar with optimum TTZ adsorption performance, was also applied as a catalyst for peroxydisulfate (PDS) activation to degrade TTZ. Factors including PDS concentration, solution pH, and reaction temperature were examined. The optimized degradation rate constant of TTZ (1.1627 min^-1) was achieved under the conditions at 2 mM PDS, pH of 3, and 23 °C. In addition, the free radical trapping experiments and EPR spectra revealed that the reactive substances of electron (e^-), ¹O₂, SO₄^•-, O₂^•-, and •OH contributed to TTZ degradation. Density Functional Theory (DFT) also concluded that the atoms C(6), O(12), N(16), N(17), C(18) and N(22) in TTZ molecule showed larger f⁰ values which are vulnerable to radical attack. Therefore, the synergistic mechanism embodying adsorption and radical/non-radical processes were proposed. Besides, the degradation pathways of TTZ were identified with the aid of HPLC/MS technique, indicating that multiple reaction processes containing the symmetrical cleavage of azo bonds, the asymmetrical cleavage of C-N, desulfonation, and benzene-like structure cracking were involved. Therefore, this study provides a simple and effective catalytic system for TTZ degradation, and also realizes the resource utilization of solid waste.

Removal of ciprofloxacin antibiotic pollutants from wastewater using nano-composite adsorptive membranes

The emergence of antibiotics in water has been globally recognized as a critical pollution issue. Antibiotics (such as Ciprofloxacin (CPFX) pose a serious threat to humans and to the ecosystem due to its accumulation in water sources which can lead to chronic health problems and endanger aquatic life. It is therefore crucial to properly remove them from water. In this work, a nano-composite adsorptive membrane based on Zirconium Phosphate (ZrP) adsorbent supported on Polyethersulfone (PES) was synthesized and evaluated for the removal of CPFX from synthetic aqueous solutions. The membranes described here showed a very high antibiotic removal rate. The effect of various parameters such as the initial concentration of the antibiotic, the adsorbent dosage, contact time, pH, and temperature was studied. The equilibrium data were found to reasonably best fit with the Temkin isotherm model. The membranes showed a high ciprofloxacin removal (99.7%) as opposed to (68%) when PES membrane alone was used. Moreover, a significant improvement in the membrane's water flux (100.84 L/m².h) and permeability (97.62 L/m².hr.bar) were noticed as opposed to pure PES membrane's flux and permeability. The adsorptive membranes were characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and Brunauer-Emmett-Teller (BET). The results confirmed the successful formation of ZrP nanoparticles adsorbent within the membrane matrix, and with enhanced hydrophilic properties. The membrane was successfully regenerated and reused up to 5 times. The results of this work showed the potential of such membranes for the removal of ciprofloxacin and at a high efficiency.

Synthesis of novel chitosan Schiff base and its ZnO nanocomposite for removal of synthetic dye, antimicrobial, and cytotoxicity activity

In this work, a novel chitosan Schiff base 4-(2-Hydroxyaniline)pent-3-en-2-one chitosan (2-HyA-CS) and its ZnO nanocomposite (2-HyA-CS/ZnO) were sensitized and characterized by appropriate methods; FTIR, XRD, Elemental analysis, SEM, TEM and TGA. The result of characterization methods confirms the preparation of 2-HyA-CS and 2-HyA-CS/ZnO. The SEM images reveal that chitosan, 2-HyA-CS, and 2-HyA-CS/ZnO have a varied roughness and porous surfaces. The reason for this difference was attributed to the formation of Schiff base 2-HyA-CS and the presence of ZnO nanoparticles in 2-HyA-CS/ZnO. The patterns of XRD and FTIR confirm the formation of 2-HyA-CS and 2-HyA-CS/ZnO. The degree of substitution (DS) of modified chitosan 2-HyA-CS was calculated using Elemental analysis and FTIR.ATR, it was found to be 74%. The adsorption efficiency of the produced adsorbents was compared with pure chitosan to remove of Remazol Brilliant Blue R (RBBR) from an aqueous medium and antimicrobial activity. The removal percentage of RBBR by chitosan, 2-HyA-CS, and 2-HyA-CS/ZnO are 47.12%, 91.9%, and 96.56%, respectively with the following order: 2-HyA-CS/ZnO > 2-HyA-CS > chitosan. Their antimicrobial activities were studied against two Gram negative bacteria ( E. coli and P. aeruginosa), two Gram positive bacteria ( S. aureus and B. cereus) and ( C. albicans) as a yeast strain, the inhibitory zone measurements revealed that the activity of 2-HyA-CS/ZnO is excellent and higher than 2-HyA-CS and pure chitosan. The cytotoxicity of the prepared compound 2-HyA-CS and 2-HyA-CS/ZnO along with pure chitosan was estimated against two human cancer cells MCF-7 cells and HepG-2 cells, the result indicates that 2-HyA-CS/ZnO having higher Inhibitory activity against both MCF-7 and HepG-2 cells with 53.5 ± 2.86 and 27.4 ± 1.23 µg/mL respectively and 2-HyA-CS possessing moderate Inhibitory activity against both MCF-7 and HepG-2 cancer cells with IC50 = 216.5 ± 7.48 and 135.6 ± 6.49 µg/ml respectively.

Adsorption of Pb(II) from water by treatment with an O-hydroxyphenyl thiourea-modified chitosan

An O-hydroxyphenyl thiourea-modified chitosan (OTCS) with excellent Pb(II) adsorption performance and selectivity was prepared as an adsorbent. The structure and morphology of the adsorbent were systematically investigated by SEM, BET, FTIR, EDX, zeta-potential measurements, XPS and XRD. The impacts of the initial Pb(II) concentration, reaction time, temperature, pH value, and coexisting ions were explored. At pH 7 and 303 K, the maximal adsorption capacity of OTCS for Pb(II) was 208.33 mg/g, which was greater than those of other adsorbing materials reported in the literature. The metal ion adsorption kinetics and isotherm models were found to obey pseudo-second-order kinetics and the Langmuir isothermal model, indicating that the adsorption process was monolayer chemisorption. The adsorption process could proceed spontaneously, and the thermodynamic results revealed that the adsorption mechanism was an endothermic reaction. The ion exchange and chelation between the sulfur, nitrogen and oxygen groups on the adsorbent and lead ions endowed the material with excellent adsorption properties. Significantly, OTCS showed excellent selectivity toward Pb(II). Therefore, the adsorbent OTCS is expected to promote the wider application of chitosan in the adsorption of Pb(II).

Chitosan as a Tool for Sustainable Development: A Mini Review

New developments require innovative ecofriendly materials defined by their biocompatibility, biodegradability, and versatility. For that reason, the scientific society is focused on biopolymers such as chitosan, which is the second most abundant in the world after cellulose. These new materials should show good properties in terms of sustainability, circularity, and energy consumption during industrial applications. The idea is to replace traditional raw materials with new ecofriendly materials which contribute to keeping a high production rate but also reducing its environmental impact and the costs. The chitosan shows interesting and unique properties, thus it can be used for different purposes which contributes to the design and development of sustainable novel materials. This helps in promoting sustainability through the use of chitosan and diverse materials based on it. For example, it is a good sustainable alternative for food packaging or it can be used for sustainable agriculture. The chitosan can also reduce the pollution of other industrial processes such as paper production. This mini review collects some of the most important advances for the sustainable use of chitosan for promoting circular economy. Hence, the present review focuses on different aspects of chitosan from its synthesis to multiple applications.

Facile preparation of nanocellulose/Zn-MOF-based catalytic filter for water purification by oxidation process

Sulfate radical (SO₄^•-)-based advanced oxidation processes (SR-AOPs) have recently attracted much attention due to their potential in degrading organic pollutants. Metal-organic frameworks (MOFs) have been reported as effective materials to generate SO₄^•-. However, it is challenging to separate and recover the dispersed MOF particles from the reaction solution when MOFs are used alone. We used cellulose nanofibers (CNFs) as a porous filter template to immobilize Zn-based MOF, zeolitic imidazolate framework-8 (ZIF-8), and obtained a catalytic composite membrane having peroxymonosulfate (PMS) activating function to produce SO₄^•-. The CNF was effective in holding ZIF-8 nanoparticle and making a durable porous filter. The activated PMS-produced ^•OH and SO₄^•- radicals from ZIF-8 play an important role in the catalytic reaction. More than 90% of methylene blue and rhodamine B was degraded by ZIF-8/CNFs composite membrane in the PMS environment within 60 min. The ZIF-8/CNFs catalytic filters can be used several times without performance reduction for organic dye degradation. The results show that ZIF-8/CNFs catalytic membrane can be separated from organic pollution system quickly and used for the efficient separation and recovery of MOF particle-based catalytic materials. Therefore, this study provides a new perspective for fabricating the MOFs particles-immobilized catalytic filter by biomass nanocellulose-based materials for water purification. This method can be used for facile fabrication of the cellulose-based porous functional filter and open diverse applications.

Kinetics and Adsorption Equilibrium in the Removal of Azo-Anionic Dyes by Modified Cellulose

This study introduces a new and bio-friendly adsorbent based on natural and cetyltrimethylammonium chloride (CTAC)-modified adsorbent prepared from wheat straw residues for the removal of Congo red (CR) and tartrazine azo-anionic dyes from aqueous solution. The adsorbent was characterized by thermogravimetric analysis (TGA), calorimetric differential (DSC), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM/EDX), and pH point of zero charge (pHPZC) techniques. It was found that decreasing the adsorbent dose and increasing the initial concentration favors the removal of tartrazine and Congo red. Tartrazine adsorption capacities were 2.31 mg/g for the cellulose extracted from wheat residues (WC) and 18.85 mg/g for the modified wheat residue cellulose (MWC) for tartrazine as well as 18.5 mg/g for WC and 19.92 for MWC during Congo red (CR) adsorption, respectively. Increasing the initial and decreasing the adsorbent dose concentration favored the adsorption process. From time effect analysis, it was found that the equilibrium time was reached at 120 min when modified wheat cellulose was used and at 480 min when wheat cellulose was used. The kinetics of adsorption were described by pseudo-second-order in all cases with R2 > 0.95. The obtained data equilibrium from this research was well-fitted by the Freundlich isotherm model.