Metal organic frameworks for electrochemical sensor applications: A review

Layer-by-layer growth of Cu3(HHTP)2 films on Cu(OH)2 nanowire arrays for high performance ascorbic acid sensing

Growing three-dimensional (3D) metal organic frameworks (MOFs) via heterogeneous epitaxial growth on metal hydroxide arrays are effective for constructing electrochemical sensor. However, the growth of MOFs is difficult to control, resulting in thick and irregular morphologies and even damage the metal hydroxide template. In this work, Cu3(HHTP)2 (HHTP = 2, 3, 6, 7, 10, 11-hexahydroxytriphenylene) films with controllable thickness and morphology were successfully prepared on Cu(OH)2 nanowire arrays (NWAs) through layer-by-layer (LBL) growth method. We have discovered that the LBL cycle and the reaction solvent composition are crucial for growing homogenous MOF thin films. The Cu3(HHTP)2 based ascorbic acid (AA) sensor, fabricated in ethanol within 10 LBL cycles, generated an ultrahigh sensitivity of 821.64 μA mM-1 cm-2 in the range of 6-981.41 μM, a low detection limit of 60 nM as well as the great selectivity, stability and reproducibility. Moreover, the relative deviation for AA detection in two fruit juices were 3.22 % and 3.71 %, and the test result for human sweat fall within the normal AA concentration range, verifying the feasibility of as-prepared sensor for practical application.

A MOF-Templated Double-Shelled Co3O4/NiCo2O4 Nanocomposite for Electrochemical Detection of Alfuzosin

We developed a novel electrochemical sensor for the detection of alfuzosin (AFZ), a drug used to treat benign prostatic hyperplasia, using a double-shelled Co3O4/NiCo2O4 nanocomposite-modified electrode. The nanocomposites were synthesized using a template-assisted approach, with zeolitic imidazole framework-67 (ZIF-67) as the sacrificial template, involving the formation of uniform ZIF-67/Ni-Co layered double hydroxide (LDH) hollow structures followed by calcination to achieve the final nanocomposite. The nanocomposite was characterized by various techniques and showed high porosity, large surface area, and good conductivity. The nanocomposite-modified electrode exhibited excellent electrocatalytic activity towards AFZ oxidation, with a wide linear range of 5-180 µM and a low limit of detection of 1.37 µM. The sensor also demonstrated good repeatability, reproducibility, and stability selectivity in the presence of common interfering substances. The sensor was successfully applied to determine the AFZ in pharmaceutical tablets and human serum samples, with satisfactory recoveries. Our results suggest that the double-shelled Co3O4/NiCo2O4 nanocomposite is a promising material for the fabrication of electrochemical sensors for AFZ detection.

Zirconium-based hydrophobic-MOFs as innovative electrode modifiers for flibanserin determination: Exploring the electrooxidation mechanism using a comprehensive spectroelectrochemical study

Three different types of Zr-based MOFs derived from benzene dicarboxylic acid (BDC) and naphthalene dicarboxylic acid as organic linkers (ZrBDC, 2,6-ZrNDC, and 1,4-ZrNDC) were synthesized. They were characterized using X-ray diffraction analysis (XRD), X-ray photoelectron spectroscopy (XPS), Fourier-transform IR spectroscopy (FT-IR), and Transmission electron microscopy (TEM). Their hydrophilic/hydrophobic nature was investigated via contact angle measurements; ZrBDC MOF was hydrophilic and the other two (ZrNDC) MOFs were hydrophobic. The three MOFs were combined with MWCNTs as electrode modifiers for the determination of a hydrophobic analyte, flibanserin (FLB), as a proof-of-concept analyte. Under the optimized experimental conditions, a significant enhancement in the oxidation peak current of FLB was observed when utilizing 2,6-ZrNDC and 1,4-ZrNDC, being the highest when using 1,4-ZrNDC. Furthermore, a thorough investigation of the complex oxidation pathway of FLB was performed by carrying out simultaneous spectroelectrochemical measurements. Based on the obtained results, it was verified that the piperazine moiety of FLB is the primary site for electrochemical oxidation. The fabricated sensor based on 1,4-ZrNDC/MW/CPE showed an oxidation peak of FLB at 0.8 V vs Ag/AgCl. Moreover, it showed excellent linearity for the determination of FLB in the range 0.05 to 0.80 μmol L-1 with a correlation coefficient (r) = 0.9973 and limit of detection of 3.0 nmol L-1. The applicability of the developed approach was demonstrated by determination of FLB in pharmaceutical tablets and human urine samples with acceptable repeatability (% RSD values were below 1.9% and 2.1%, respectively) and reasonable recovery values (ranged between 97 and 103% for pharmaceutical tablets and between 96 and 102% for human urine samples). The outcomes of the suggested methodology can be utilized for the determination of other hydrophobic compounds of pharmaceutical or biological interest with the aim of achieving low detection limits of these compounds in various matrices.

Construction of porphyrinic manganese-organic frameworks based on structural regulation for electrochemical determination of nitrobenzene in water and vegetable samples

Nitrobenzene (NB) is one of the major organic pollutants that has seriously endangered human health and the environment even in trace amounts. Therefore, it is of great significance to detect trace NB efficiently and sensitively. Herein, a porphyrinic metal-organic framework (MOF) of Mn-PCN-222 (PCN, porous coordination network) was first synthesized by the coordination between Zr6 cluster and tetrakis (4-carboxyphenyl)-porphyrin-Mn (Ⅲ) (MnTCPPCl) ligand. To regulate its structure and the electrochemical properties, a phenyl group was inserted in each branched chain of TCPP to form the TCBPP organic ligand. Then, we used Zr6 clusters and manganese metalloporphyrin (MnTCBPPCl) to synthesize a new porphyrin-based MOF (Mn-CPM-99, CPM, crystalline porous material). Due to the extended chains of TCPP, the rod-shaped structure of Mn-PCN-222 was switched to concave quadrangular bipyramid of Mn-CPM-99. Mn-CPM-99 exhibited higher porosity, larger specific surface area, better electrochemical performances than those of Mn-PCN-222. By using modular assembly technique, Mn-CPM-99 film was sequentially assembled on the surface of indium-tin-oxide (ITO) to prepare an electrochemical sensor (Mn-CPM-99/ITO). The proposed sensor showed excellent electrochemical reduction of NB and displayed three linear response ranges in the wide concentration ranges. The obtained low limit of detection (LOD, 1.3 nM), high sensitivity and selectivity, and good reproducibility of the sensor for NB detection fully illustrate that Mn-CPM-99 is an excellent candidate for electrochemical sensor interface material. Moreover, the sensor was successfully applied to the detection of NB in lake water and vegetable samples showing satisfactory recovery of 98.9%-101.8%.

Advanced Hybrid materials in electrochemical sensors: Combining MOFs and conducting polymers for environmental monitoring

The integration of conducting polymers (CPs) with metal-organic frameworks (MOFs) has arisen as a dynamic and innovative approach to overcome some intrinsic limitations of both materials, representing a transformative method to address the pressing need for high-performance environmental monitoring tools. MOFs, with their intricate structures and versatile functional groups, provide tuneable porosity and an extensive surface area, facilitating the selective adsorption of target analytes. Conversely, CPs, characterized by their exceptional electrical conductivity and redox properties, serve as proficient signal transducers. By combining these two materials, a novel class of hybrid materials emerges, capitalizing on the unique attributes of both components. These MOF/CP hybrids exhibit heightened sensitivity, selectivity, and adaptability, making them primordial in detecting and quantifying environmental contaminants. This review examines the synergy between MOFs and CPs, highlighting recent advancements, challenges, and prospects, thus offering a promising solution for developing advanced functional materials with tailored properties and multifunctionality to be applied in electrochemical sensors for environmental monitoring.

Bimetallic metal organic framework/Ni doped ZnO nanomaterials modified carbon paste electrode for selective electrochemical determination of ciprofloxacin

In this work, an efficient and sensitive electrochemical sensor for the determination of ciprofloxacin (CIP) is reported. The sensor was prepared by using a carbon paste electrode (CPE) modified with a combination of bimetallic copper/cerium-based metal organic framework (Cu/Ce-MOF) and nickel doped zinc oxide nanoparticles (NZP). The modifiers were characterized by Brunauer-Emmett-Teller (BET) analysis, Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), and elemental mapping analysis (EDS). The electrochemical behavior of the modified electrode was studied by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The developed electrode was employed for the detection of CIP by differential pulse voltammetry (DPV). Under optimal conditions, the anodic peak current response of the electrode was linearly correlated with CIP concentration in the range of 0.75-100 μmol L-1 with a sensitivity of 1.29 μA μmol-1 L-1. The limit of detection and reproducibility of the method were 0.142 μmol L-1 and 2.7%, respectively. The developed sensor showed good selectivity to CIP against possible interferents. The method was applied to determine CIP in water, milk and urine samples. The results indicated that this method has potential to be applied in the analysis of residue CIP in complex matrices with high selectivity, and good reproducibility.

An electrochemical sensor founded on heterogeneous MXene & MOF composite for tanshinol sensing

A new kind of electrochemical sensor based on the MXene & MOF composite-modified carbon cloth was prepared firstly by self-assembly through hydrogen bonds, and then by air-annealing process for detection. The preparation processing introduced chemical bonds between MXene and MOF, which remarkably enhanced the electron transfer ability. Accordingly, combing the unique features of MXene and MOF themselves, the novel electrochemical sensor exhibited exceptional performance to detect tanshinol. Via differential pulse voltammetry, we could obtain a linear tanshinol concentration range of 0.08-8 μM and the limit of detection is 0.034 μM. Furthermore, this developed electrochemical sensor could determine concentrations of tanshinol in real Chinese herbal samples, confirming its practicability and reliability.

Advances in metal-organic frameworks for water remediation applications

Rapid industrialization and agricultural development have resulted in the accumulation of a variety of harmful contaminants in water resources. Thus, various approaches such as adsorption, photocatalytic degradation and methods for sensing water contaminants have been developed to solve the problem of water pollution. Metal-organic frameworks (MOFs) are a class of coordination networks comprising organic-inorganic hybrid porous materials having organic ligands attached to inorganic metal ions/clusters via coordination bonds. MOFs represent an emerging class of materials for application in water remediation owing to their versatile structural and chemical characteristics, such as well-ordered porous structures, large specific surface area, structural diversity, and tunable sites. The present review is focused on recent advances in various MOFs for application in water remediation via the adsorption and photocatalytic degradation of water contaminants. The sensing of water pollutants using MOFs via different approaches, such as luminescence, electrochemical, colorimetric, and surface-enhanced Raman spectroscopic techniques, is also discussed. The high porosity and chemical tunability of MOFs are the main driving forces for their widespread applications, which have huge potential for their commercial use.

Tailoring the topology of ZIF-67 metal-organic frameworks (MOFs) adsorbents to capture humic acids

Chlorination is a versatile technique to combat water-borne pathogens. Over the last years, there has been continued research interest to abate the formation of chlorinated disinfection by-products (DBPs). To prevent hazardous DBPs in drinking water, it is decided to diminish organic precursors, among which humic acids (HA) resulting from the decomposition and transformation of biomass. Metal-organic frameworks (MOFs) such as zeolitic imidazolate frameworks (ZIFs) have recently received tremendous attention in water purification. Herein, customized ZIF-67 MOFs possessing various physicochemical properties were prepared by changing the cobalt source. The HA removal by ZIF-67-Cl, ZIF-67-OAc, ZIF-67-NO3, and ZIF-67-SO4 were 85.6%, 68.9%, 86.1%, and 87.4%, respectively, evidently affected by the specific surface area. HA uptake by ZIF-67-SO4 indicated a removal efficiency beyond 90% in 4  90% after 60 min mixing the solution with 0.3 g L-1 ZIF-67-SO4. Notably, an acceptable removal performance (∼72.3%) was obtained even at HA concentrations up to 100 mg L-1. The equilibrium data fitted well with the isotherm models in the order of Langmuir> Hill > BET> Khan > Redlich-Peterson> Jovanovic> Freundlich > and Temkin. The maximum adsorption capacity qm for HA uptake by ZIF-67-SO4 was 175.89 mg g-1, well above the majority of adsorbents. The pseudo-first-order model described the rate of HA adsorption by time. In conclusion, ZIF-67-SO4 presented promising adsorptive properties against HA. Further studies would be needed to minimize cobalt leaching from the ZIF-67-SO4 structure and improve its reusability safely, to ensure its effectiveness and the economy of adsorption system.

Recent advances in metal-organic framework (MOF)-based agricultural sensors for metal ions: a review

Metal ions have great significance for agricultural development, food safety, and human health. In turn, there exists an imperative need for the development of novel, sensitive, and reliable sensing techniques for various metal ions. Agricultural sensors for the diagnosis of both agricultural safety and nutritional health can establish quality and safety traceability systems of both agro-products and food to guarantee human health, even life safety. Metal-organic frameworks (MOFs) are utilized widely for the design of diversified sensors due to their distinctive structural characteristics and extraordinary optical and electrical properties. To serve agricultural sensors better, this review is dedicated to providing a brief overview of the synthesis of MOFs, the modification of MOFs, the fabrication of MOF-based film electrodes, the applications of MOF-based agricultural sensors for metal ions, which are centered on electrochemical sensors and optical sensors, and current challenges of MOF-based agricultural sensors. In addition, this review also provides potential future opportunities for the development and practical application of agricultural sensors.

Recent advances in the modification of electrodes for trace metal analysis: a review

This review paper summarizes the research published in the last five years on using different compounds and/or materials as modifiers for electrodes employed in trace heavy metal analysis. The main groups of modifiers are identified, and their single or combined application on the surface of the electrodes is discussed. Nanomaterials, film-forming substances, and polymers are among the most used compounds employed mainly in the modification of glassy carbon, screen-printed, and carbon paste electrodes. Composites composed of several compounds and/or materials have also found growing interest in the development of modified electrodes. Environmentally friendly substances and natural products (mainly biopolymers and plant extracts) have continued to be included in the modification of electrodes for trace heavy metal analysis. The main analytical performance parameters of the modified electrodes as well as possible interferences affecting the determination of the target analytes, are discussed. Finally, a critical evaluation of the main findings from these studies and an outlook discussing possible improvements in this area of research are presented.

Two-Dimensional Cu-Porphyrin Metal-Organic Framework Nanosheet-Supported Flaky TiO2 as an Efficient Visible-Light-Driven Photocatalyst for Dye Degradation and Cr(VI) Reduction

A series of 2D M(Cu, Zn, Co, and Mn)-TCPP MOFs/TiO2 binary nanocomposites (TCPP = tetrakis(4-carboxyphenyl)porphyrin) were constructed by solvothermal in situ loading of flaky TiO2 on the surface of 2D metal-organic frameworks (MOFs). The influence of different coordination metals on the catalytic activity was studied, and it was found that the 2D Cu-TCPP MOFs/TiO2 nanocomposite exhibited the best photo-Fenton performance. The superior property can be attributed to the high absorption coefficient and ultrathin two-dimensional structure of the 2D Cu-TCPP MOFs nanosheets. Meanwhile, the 2D Cu-TCPP MOFs/TiO2 II heterostructure can effectively promote the separation and transfer of photoformed carriers. Moreover, under visible irradiation, the optimized 2D Cu-TCPP MOFs/TiO2 composite can convert 99.9% of Cr(VI) to Cr(III) within 60 min with methanol as the hole scavenger at pH 3.14. Also, the photocatalytic performance of 2D Cu-TCPP MOFs/TiO2 was maintained after five reaction cycles. Furthermore, the proposed visible-light-driven photocatalysis mechanism of the 2D Cu-MOFs/TiO2 composite was reasonably derived according to experimental results. This study demonstrates the potential of building efficient TiO2-based visible light photocatalysts with 2D metal-porphyrin MOFs.

Review on Uric Acid Recognition by MOFs with a Future in Machine Learning

Uric acid (UA) is produced from purine metabolism and serves as a prevalent biomarker for multiple diseases including cancer. Hyperuricemia or hypouricemia can cause multiple dysfunctions throughout the biological processes. Consequently, there is a pressing need for monitoring UA concentration in body fluid. While clinical methods are known, the availability of a point-of-care testing (PoCT) kit remains conspicuously absent. In the case of electrochemical recognition of UA, the oxidation potential of ascorbic acid closely aligns with that of UA and thus it hinders the detection process, which eventually may result in false positive signals. Several chemosensors are known in the field of supramolecular chemistry, and metal-organic frameworks (MOFs) are one of the best-performing contenders due to their robustness, stability, and versatile structures. In this review, we tried to unbox the up-to-date development of UA sensing by MOFs. We delve into the state of UA recognition by MOFs, exploring both electrochemical and fluorometric pathways and drawing comparisons with structurally similar probes like covalent organic frameworks (COFs) to understand/establish the advantages of MOFs specifically in UA sensing. In the absence of a PoCT kit, we have provided the conceptual outlook for designing a PoCT device termed a "Urimeter" via electrochemical operation. For the first time, we have proposed different methods of how UA sensing can be tied up with artificial intelligence and machine learning (AI-ML).

Ultrafast Response in Nonenzymatic Electrochemical Glucose Sensing with Ni(II)-MOFs by Dimensional Manipulation

Metal-organic frameworks (MOFs) are emerging as promising candidates for electrochemical glucose sensing owing to their ordered channels, tunable chemistry, and atom-precision metal sites. Herein, the efficient nonenzymatic electrochemical glucose sensing is achieved by taking advantage of Ni(II)-based metal-organic frameworks (Ni(II)-MOFs) and acquiring the ever-reported fastest response time. Three Ni(II)-MOFs ({[Ni6L2(H2O)26]4H2O}n (CTGU-33), {Ni(bib)1/2(H2L)1/2(H2O)3}n (CTGU-34), {Ni(phen)(H2L)1/2(H2O)2}n (CTGU-35)) have been synthesized for the first time, which use benzene-1,2,3,4,5,6-hexacarboxylic acid (H6L) as an organic ligand and introduce 1,4-bis(1-imidazoly)benzene (bib) or 1,10-phenanthroline (phen) as spatially auxiliary ligands. Bib and phen convert the coordination mode of CTGU-33, affording structural dimensions from 2D of CTGU-33 to 3D of CTGU-34 or 1D of CTGU-35. By tuning the dimension of the skeleton, CTGU-34 with 3D interconnected channels exhibits an ultrafast response of less than 0.4 s, which is superior to the existing nonenzymatic electrochemical sensors. Additionally, a low detection limit of 0.12 μM (S/N = 3) and a high sensitivity of 1705 μA mM-1 cm-2 are simultaneously achieved. CTGU-34 further showcases desirable anti-interference and cycling stability, which demonstrates a promising application prospect in the real-time detection of glucose.

Multiscale Porous Carbon Materials by In Situ Growth of Metal-Organic Framework in the Micro-Channel of Delignified Wood for High-Performance Water Purification

Porous carbon materials are suitable as highly efficient adsorbents for the treatment of organic pollutants in wastewater. In this study, we developed multiscale porous and heteroatom (O, N)-doped activated carbon aerogels (CAs) based on mesoporous zeolitic imidazolate framework-8 (ZIF-8) nanocrystals and wood using 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) oxidation, in situ synthesis, and carbonization/activation. The surface carboxyl groups in a TEMPO-oxidized wood (TW) can provide considerably large nucleation sites for ZIF-8. Consequently, ZIF-8, with excellent porosity, was successfully loaded into the TW via in situ growth to enhance the specific surface area and enable heteroatom doping. Thereafter, the ZIF-8-loaded TW was subjected to a direct carbonization/activation process, and the obtained activated CA, denoted as ZIF-8/TW-CA, exhibited a highly interconnected porous structure containing multiscale (micro, meso, and macro) pores. Additionally, the resultant ZIF-8/TW-CA exhibited a low density, high specific surface area, and excellent organic dye adsorption capacity of 56.0 mg cm-3, 785.8 m2 g-1, and 169.4 mg g-1, respectively. Given its sustainable, scalable, and low-cost wood platform, the proposed high-performance CA is expected to enable the substantial expansion of strategies for environmental protection, energy storage, and catalysis.

Facile synthesis of Ag/ZIF-8@ZIF-67 as an electrochemical sensing platform for sensitive detection of halonitrophenols in drinking water

Halonitrophenols (HNPs) are an emerging type of aromatic disinfection byproduct, with detected concentrations of ∼nmol L-1 in source water and drinking water. Currently, there are no standard methods for identifying HNPs, and most of the reported methods are time-consuming and equipment-dependent. A core-shell metal-organic framework (MOF) based electrochemical sensor (Ag/ZIF-8@ZIF-67) capable of detecting 2,6-dichloro-4-nitrophenol (2,6-DCNP) is reported in this study. The electrochemical sensor obtains the concentration of 2,6-DCNP by detecting the peak current passing through the sensor. In this sensor, Ag nanoparticles (AgNPs) play a key role in electrochemical sensing by reducing nitro groups via electron transfer, and porous structure with a large surface area is offered by ZIF-8@ZIF-67. The cyclic voltammetry (CV) response of Ag/ZIF-8@ZIF-67 was found to be approximately 1.75 times and 2.23 times greater than that of Ag/ZIF-8 and Ag/ZIF-67, respectively, suggesting an ideal synergistic effect of the core-shell structures. The Ag/ZIF-8@ZIF-67 sensor exhibited exceptional sensitivity to 2,6-DCNP, exhibiting a broad linear response range (R2 = 0.992) from 240 nmol L-1 to 288 μmol L-1 and a low detection limit of 20 nmol L-1. Furthermore, the sensor exhibited good anti-interference for isomers and common distractors in water, excellent stability and reproducibility, and high recovery in actual water samples. Our reported sensor gives a novel strategy for sensitive, selective, and in situ detection of 2,6-DCNP in practical analysis.

MOF-Based Biosensors for the Detection of Carcinoembryonic Antigen: A Concise Review

Cancer has been considered one of the most serious diseases in recent decades. Early diagnosis of cancer is a crucial step for expedited treatment. Ideally, detection of cancer biomarkers, which are usually elevated because of cancer, is the most straightforward approach to detecting cancer. Among these biomarkers, the carcinoembryonic antigen (CEA) is considered one of the most important tumor markers for colorectal cancer. The CEA has also been recognized as a biomarker for other types of cancers, including breast, gastric, ovarian, pancreatic, and lung cancers. Typically, conventional CEA testing depends on immunoassay approaches, which are known to be complex, highly expensive, and time consuming. Accordingly, various types of biosensors have been designed for the detection of cancer biomarkers. The main prerequisites of these biosensors are high sensitivity, fast response, and low cost. Many nanostructures have been involved in the design of biosensors, such as nanoparticles of certain metals and metal oxides that are further functionalized to contribute to the sensing of the biomarkers. Alternatively, metal organic frameworks (MOFs), which are extended crystalline structures comprising metal clusters surrounded by organic linkers, have been shown to be highly promising for the development of biosensors. The 3D structure of MOFs results in a combination of high surface area and high interconnected porosity, which are believed to facilitate their function in the design of a biosensor. This review briefly classifies and describes MOF-based biosensor trials that have been published recently for the aim of detecting CEA.

Metal-organic frameworks/metal nanoparticles as smart nanosensing interfaces for electrochemical sensors applications: a mini-review

Metal-organic frameworks (MOFs) are porous materials with huge specific surface area and abundant active sites, which are composed of metal ions or clusters and organic ligands in the form of coordination bonds. In recent years, MOFs have been successfully applied in many fields due to their excellent physical, chemical, and biological properties. Electrochemical sensors have advantages such as economy, portability, and sensitivity, making them increasingly valued in the field of sensors. Many studies have shown that the electrode materials will affect the performance of electrochemical sensors. Therefore, the research on electrode materials is still one of the hotspots. MOFs are also commonly used to construct electrochemical sensors. However, electrochemical sensors prepared from single MOFs have shortcomings such as insufficient conductivity, low sensitivity, and poor electrochemical catalytic ability. In order to compensate for these defects, a new type of nanocomposite material with very ideal conductivity was formed by adding metal nanoparticles (MNPs) to MOFs. The combination of the two is expected to be widely applied in the field of sensors. This review summarizes the applications of various MNPs/MOFs composites in the field of electrochemical sensors and provides some references for the development of MNPs/MOFs composites-based electrochemical sensors in the future.

Metal-Organic Framework Coated Devices for Gas Sensing

The demand for monitoring chemical and physical information surrounding, air quality, and disease diagnosis has propelled the development of devices for gas sensing that are capable of translating external stimuli into detectable signals. Metal-organic frameworks (MOFs), possessing particular physiochemical properties with designability in topology, specific surface area, pore size and/or geometry, potential functionalization, and host-guest interactions, reveal excellent development promises for manufacturing a variety of MOF-coated sensing devices for multitudinous applications including gas sensing. The past years have witnessed tremendous progress on the preparation of MOF-coated gas sensors with superior sensing performance, especially high sensitivity and selectivity. Although limited reviews have summarized different transduction mechanisms and applications of MOF-coated sensors, reviews summarizing the latest progress of MOF-coated devices under different working principles would be a good complement. Herein, we summarize the latest advances of several classes of MOF-based devices for gas sensing, i.e., chemiresistive sensors, capacitors, field-effect transistors (FETs) or Kelvin probes (KPs), electrochemical, and quartz crystal microbalance (QCM)-based sensors. The surface chemistry and structural characteristics were carefully associated with the sensing behaviors of relevant MOF-coated sensors. Finally, challenges and future prospects for long-term development and potentially practical application of MOF-coated sensing devices are pointed out.

Sensitive Current Sensor Based on a Lanthanide Framework with Lewis Basic Bipyridyl Sites for Cu2+ Detection

A new Yb-based three-dimensional metal-organic framework with free Lewis basic sites, [Yb₂(ddbpdc)₃(CH₃OH)₂] (referred to as ACBP-6), from YbCl₃ and (6R,8R)-6,8-dimethyl-7,8-dihydro-6H-[1,5]dioxonino[7,6-b:8,9-b']dipyridine-3,11-dicarboxylic acid (H₂ddbpdc) was synthesized by a conventional solvothermal method. Two Yb³⁺ are connected by three carboxyl groups to form the [Yb₂(CO₂)₅] binuclear unit, which is further bridged by two carboxyl moieties to produce a tetranuclear secondary building unit. With further ligation of the ligand ddbpdc^2-, a 3-D MOF with helical channels is constructed. In the MOF, Yb³⁺ only coordinates with O atoms, leaving the bipyridyl N atoms of ddbpdc^2- unoccupied. The unsaturated Lewis basic sites make this framework possible to coordinate with other metal ions. After growing the ACBP-6 in situ into a glass micropipette, a novel current sensor is formed. This sensor shows high selectivity and a high signal-to-noise ratio toward Cu²⁺ detection with a detection limit of 1 μM, due to the stronger coordination ability between the Cu²⁺ and the bipyridyl N atoms.

Novel Approaches to Enzyme-Based Electrochemical Nanobiosensors

Electrochemistry is a genuinely interdisciplinary science that may be used in various physical, chemical, and biological domains. Moreover, using biosensors to quantify biological or biochemical processes is critical in medical, biological, and biotechnological applications. Nowadays, there are several electrochemical biosensors for various healthcare applications, such as for the determination of glucose, lactate, catecholamines, nucleic acid, uric acid, and so on. Enzyme-based analytical techniques rely on detecting the co-substrate or, more precisely, the products of a catalyzed reaction. The glucose oxidase enzyme is generally used in enzyme-based biosensors to measure glucose in tears, blood, etc. Moreover, among all nanomaterials, carbon-based nanomaterials have generally been utilized thanks to the unique properties of carbon. The sensitivity can be up to pM levels using enzyme-based nanobiosensor, and these sensors are very selective, as all enzymes are specific for their substrates. Furthermore, enzyme-based biosensors frequently have fast reaction times, allowing for real-time monitoring and analyses. These biosensors, however, have several drawbacks. Changes in temperature, pH, and other environmental factors can influence the stability and activity of the enzymes, affecting the reliability and repeatability of the readings. Additionally, the cost of the enzymes and their immobilization onto appropriate transducer surfaces might be prohibitively expensive, impeding the large-scale commercialization and widespread use of biosensors. This review discusses the design, detection, and immobilization techniques for enzyme-based electrochemical nanobiosensors, and recent applications in enzyme-based electrochemical studies are evaluated and tabulated.

Target-Responsive Metal-Organic Framework Nanosystem with Synergetic Sensitive Detection and Controllable Degradation against the Pesticide Triazophos in Contaminated Samples for Environment Assessment and Food Safety

Developing sensitive practical sensors for monitoring pesticide residues in edible foods and environmental samples is vital for food safety and environmental protection. Enzyme-inhibited biosensors offer effective alternative sensing strategies by using the inherent characteristics of pesticides. To further improve the degradation function of pesticide sensors, here, a target-triggered porphyrin metal-organic framework (MOF)-based nanosystem was designed with the synergetic bifunction of sensitive detection and controllable degradation of the triazophos pesticide. As a result of triazophos-inhibited glutathione consumption, the MOF collapsed and released the ligand porphyrin, leading to the recovery of fluorescence and photosensitization of the free porphyrin. The fluorescence recovery resulted in a sensitive detection limit of 0.6 ng mL^-1 for triazophos, which was also applied for the determination of contaminated samples and bioaccumulation in rice. Furthermore, the target-activated photocatalytic ability of porphyrin endowed the system with the ability to effectively generate reactive oxygen species for degrading triazophos with a removal rate of ∼85%, achieving eco-friendly synergetic detection and photodegradation in a controllable way. Therefore, the intelligent multifunctional MOF system demonstrated the potential of programmable systems for jointly controllable tracking and elimination of pesticide residues in the environment and opened a new avenue for designing a precise mechanism for stimulus-triggered degradation of pesticide residues accompanied by sensitive detection for environmental friendliness and food safety.

Electrochemical Detection of ompA Gene of C. sakazakii Based on Glucose-Oxidase-Mimicking Nanotags of Gold-Nanoparticles-Doped Copper Metal-organic Frameworks

The present work developed an electrochemical genosensor for the detection of virulence outer membrane protein A (ompA, tDNA) gene of Cronobacter sakazakii (C. sakazakii) by exploiting the excellent glucose-oxidase-mimicking activity of copper Metal-organic frameworks (Cu-MOF) doped with gold nanoparticle (AuNPs). The signal nanotags of signal probes (sDNA) that biofunctionalized AuNPs@Cu-MOF (sDNA-AuNPs@Cu-MOF) were designed using an Au-S bond. The biosensor was prepared by immobilization capture probes (cDNA) onto an electrodeposited AuNPs-modified glassy carbon electrode (GCE). AuNPs@Cu-MOF was introduced onto the surface of the GCE via a hybridization reaction between cDNA and tDNA, as well as tDNA and sDNA. Due to the enhanced oxidase-mimicking activity of AuNPs@Cu-MOF to glucose, the biosensor gave a linear range of 1.0 × 10^-15 to 1.0 × 10^-9 mol L^-1 to tDNA with a detection limit (LOD) of 0.42 fmol L^-1 under optimized conditions using differential pulse voltammetry measurement (DPV). It can be applied in the direct detection of ompA gene segments in total DNA extracts from C. sakazakii with a broad linear range of 5.4-5.4 × 10⁵ CFU mL^-1 and a LOD of 0.35 CFU mL^-1. The biosensor showed good selectivity, fabricating reproducibility and storage stability, and can be used for the detection of ompA gene segments in real samples with recovery between 87.5% and 107.3%.

Ultrasensitive and Simple Dopamine Electrochemical Sensor Based on the Synergistic Effect of Cu-TCPP Frameworks and Graphene Nanosheets

Dopamine (DA) is an important neurotransmitter. Abnormal concentration of DA can result in many neurological diseases. Developing reliable determination methods for DA is of great significance for the diagnosis and monitoring of neurological diseases. Here, a novel and simple electrochemical sensing platform for quantitative analysis of DA was constructed based on the Cu-TCPP/graphene composite (TCPP: Tetrakis(4-carboxyphenyl)porphyrin). Cu-TCPP frameworks were selected in consideration of their good electrochemical sensing potential. The graphene nanosheets with excellent conductivity were then added to further improve the sensing efficiency and stability of Cu-TCPP frameworks. The electrochemical properties of the Cu-TCPP/graphene composite were characterized, showing its large electrode active area, fast electron transfer, and good sensing performance toward DA. The signal enhancement mechanism of DA was explored. Strong accumulation ability and high electrocatalytic rate were observed on the surface of Cu-TCPP/graphene-modified glassy carbon electrode (Cu-TCPP/graphene/GCE). Based on the synergistic sensitization effect, an ultrasensitive and simple DA electrochemical sensor was developed. The linear range is 0.02–100 and 100–1000 µM, and the detection limit is 3.6 nM for the first linear range. It was also successfully used in detecting DA in serum samples, and a satisfactory recovery was obtained.

Metal organic frameworks as promising sensing tools for electrochemical detection of persistent heavy metal ions from water matrices: A concise review

Water bodies are being polluted rapidly by disposal of toxic chemicals with their huge entrance into drinking water supply chain. Among these pollutants, heavy metal ions (HMIs) are the most challenging one due to their non-biodegradability, toxicity, and ability to biologically hoard in ecological systems, thus posing a foremost danger to human health. This can be addressed by robust, sensitive, selective, and reliable sensing of metal ions which can be achieved by Metal organic frameworks (MOF) based electrochemical sensors. In the present era, MOFs have caught greater interest in a variety of applications including sensing of hazardous pollutants such as heavy metal ions. So, in this review article, types, synthesis and working mechanism of MOF based sensors is explained to give general overview with updated literature. First time, detailed study is done for sensing of metal ions such as chromium, mercury, zinc, copper, manganese, palladium, lead, iron, cadmium and lanthanide by MOFs based electrochemical sensors. The use of MOFs as electrochemical sensors has attractive success story along with some challenges of the area. Considering these challenges, we attempted to highlight the milestone achieved and shortcomings along with future prospective of the MOFs for employing it in electrochemical sensing devices for HMIs. Finally, challenges and future prospects have been discussed to promote the development of MOFs-based sensors in future.

Framing of Poly(arylene-ethynylene) around Carbon Nanotubes and Iodine Doping for the Electrochemical Detection of Dopamine

Dopamine (DA), an organic biomolecule that acts as both a hormone and a neurotransmitter, is essential in regulating emotions and metabolism in living organisms. The accurate determination of DA is important because it indicates early signs of serious neurological disorders. Covalent organic frameworks (COFs) and metal-organic frameworks (MOFs) have received considerable attention in recent years as promising porous materials with an unrivaled degree of tunability for electrochemical biosensing applications. This study adopted a solvothermal strategy for the synthesis of a conjugated microporous poly(arylene ethynylene)-4 (CMP-4) network using the Sonagashira-Hagihara cross-coupling reaction. To increase the crystallinity and electrical conductivity of the material, CMP-4 was enveloped around carbon nanotubes (CNTs), followed by iodine doping. When used as an electrochemical probe, the as-synthesized material (I₂-CMP-CNT-4) exhibited excellent selectivity and sensitivity to dopamine in the phosphate-buffered solution. The detection limits of the electrochemical sensor were 1 and 1.7 μM based on cyclic voltammetry (CV) and differential pulse voltammetry (DPV).

Covalent Organic Frameworks-Based Electrochemical Sensors for Food Safety Analysis

Food safety is a key issue in promoting human health and sustaining life. Food analysis is essential to prevent food components or contaminants causing foodborne-related illnesses to consumers. Electrochemical sensors have become a desirable method for food safety analysis due to their simple, accurate and rapid response. The low sensitivity and poor selectivity of electrochemical sensors working in complex food sample matrices can be overcome by coupling them with covalent organic frameworks (COFs). COFs are a kind of novel porous organic polymer formed by light elements, such as C, H, N and B, via covalent bonds. This review focuses on the recent progress in COF-based electrochemical sensors for food safety analysis. Firstly, the synthesis methods of COFs are summarized. Then, a discussion of the strategies is given to improve the electrochemistry performance of COFs. There follows a summary of the recently developed COF-based electrochemical sensors for the determination of food contaminants, including bisphenols, antibiotics, pesticides, heavy metal ions, fungal toxin and bacterium. Finally, the challenges and the future directions in this field are discussed.

A New Electrochemical Sensor for the Detection of Ketoconazole Using Carbon Paste Electrode Modified with Sheaf-like Ce-BTC MOF Nanostructure and Ionic Liquid

An ultrasensitive and selective voltammetric sensor with an ultratrace-level detection limit is introduced for ketoconazole (KTC) determination in real samples using a modified carbon paste electrode with a sheaf-like Ce-BTC MOF nanostructure and ionic liquid. The as-synthesized nanostructure was characterized by several techniques, including energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and field emission scanning electron microscopy (FE-SEM). The electrocatalytic performance of the developed electrode was observed by cyclic voltammetry (CV), differential pulse voltammetry (DPV), linear sweep voltammetry (LSV), and chronoamperometry. The limit of detection (LOD) of the developed sensor for KTC is 0.04 μM, and the response was found to be in the dynamic concentration range of 0.1-110.0 μM in a phosphate buffer solution. The proposed electrode exhibits acceptable electrocatalytic activity for KTC oxidation with a high sensitivity of 0.1342 μA·μM^-1. The ability of the fabricated sensor to monitor KTC in real aqueous samples is demonstrated using standard addition data.

Recent progress of metal-organic frameworks as sensors in (bio)analytical fields: towards real-world applications

The deployment of metal-organic frameworks (MOFs) in a plethora of analytical and bioanalytical applications is a growing research area. Their unique properties such as high but tunable porosity, well-defined channels or pores, and ease of post-synthetic modification to incorporate additional functional units make them ideal candidates for sensing applications. This is possible because the interaction of analytes with a MOF often results in a change in its structure, eventually leading to a modification of the intrinsic physicochemical properties of the MOF which is then transduced into a measurable signal. The high porosity allows for the adsorption of analytes very efficiently, while the tunable pore sizes/nature and/or installation of specific recognition groups allow modulating the affinity towards different classes of compounds, which in turn lead to good sensor sensitivity and selectivity, respectively. Some figures are given to illustrate the potential of MOF-based sensors in the most relevant application fields, and future challenges and opportunities to their possible translation from academia (i.e., laboratory testing of MOF sensing properties) to industry (i.e., real-world analytical sensor devices) are critically discussed.

Metal-porphyrinic framework nanotechnologies in modern agricultural management

Metal-porphyrinic frameworks are an important subclass of metal-organic frameworks (MOFs). These porous materials exhibit a large number of applications for sustainable development and related environmental considerations. Their attractive features include (1) as a free base or metalated with zinc(II) or iron(II or III), they are environmentally benign, and (2) they absorb visible light and are emissive and semi-conducting, making them convenient tools for sensing agrochemicals. But the key feature that makes these nano-sized pristine materials or their composites in many ways superior to most MOFs is their ability to photo-generate reactive oxygen species with visible light, including singlet oxygen. This review describes important issues related to agriculture, including controlled delivery of pesticides and agrochemicals, detection of pesticides and pathogenic metals, elimination of pesticides and toxic metals, and photodynamic antimicrobial activity, and has an important implication for food safety. This comprehensive review presents the progress of the rather rapid developments of these functional and increasingly nano-sized materials and composites in the area of sustainable agriculture.

Recent Progress in Aptamer-Functionalized Metal-Organic Frameworks-Based Optical and Electrochemical Sensors for Detection of Mycotoxins

Mycotoxin contamination in foodstuffs and agricultural products has posed a serious hazard to human health and raised international concern. The progress of cost-effective, facile, rapid and reliable analytical tools for mycotoxin determination is in urgent need. In this regard, the potential utility of metal-organic frameworks (MOFs) as a class of crystalline porous materials has sparked immense attention due to their large specific surface area, adjustable pore size, nanoscale framework structure and good chemical stability. The amalgamation of MOFs with high-affinity aptamers has resulted in the progress of advanced aptasensing methods for clinical and food/water safety diagnosis. Aptamers have many advantages over classical approaches as exceptional molecular recognition constituents for versatile bioassays tools. The excellent sensitivity and selectivity of the MOF-aptamer biocomposite nominate them as efficient lab-on-chip tools for portable, label-free, cost-effective and real-time screening of mycotoxins. Current breakthroughs in the concept, progress and biosensing applications of aptamer functionalized MOFs-derived electrochemical and optical sensors for mycotoxins have been discussed in this study. We first highlighted an overview part, which provides some insights into the functionalization mechanisms of MOFs with aptamers, offering a foundation to create MOFs-based aptasensors. Then, we discuss various strategies to design high-performance MOFs-based aptamer scaffolds, which serve as either signal nanoprobe carriers or signal nanoprobes and their applications. We perceived that applications of optical aptamers are in their infancy in comparison with electrochemical MOFs-derived aptasensors. Finally, current challenges and prospective trends of MOFs-aptamer sensors are discussed.

Advances in plasmonic-based MOF composites, their bio-applications and perspectives in this field

INTRODUCTION

Nanomaterials have been used for bio-applications since the late 20st century. In an attempt to tailor and optimize their properties, and by extension their efficiency, composites have attracted considerable attention. In this regard, recent studies on plasmonic nanoparticles and metal-organic framework (NP@MOF) composites suggested these materials show great promise in this field.

AREAS COVERED

This review focused on the more recent scientific advances in the synthetic strategies to optimize plasmonic MOF nanocomposites currently available, as well as their bio-application, particularly as biosensors and therapy.

EXPERT OPINION

Plasmonic MOF nanocomposites have shown great potential as they combine the properties of both materials with proven efficiency in bio-application. On the one hand, nanoMOFs have proven their potential particularly as drug nanocarriers, owing to their exceptional porosity and tunability. On the other hand, plasmonic nanoparticles have been an asset for imaging and phototherapy. Different strategies have been reported to develop these nanocomposites, mainly including core-shell, encapsulation, and in situ reduction. In addition, advanced composite structures should be considered, such as mixed metal nanoparticles, hollow structures or the combination of several approaches. Specifically, plasmonic MOF nanocomposites prove to be attractive stimuli responsive drug delivery systems, phototherapeutic agents as well as highly sensitive biosensors.

Design and Application of Electrochemical Sensors with Metal-Organic Frameworks as the Electrode Materials or Signal Tags

Metal-organic frameworks (MOFs) with fascinating chemical and physical properties have attracted immense interest from researchers regarding the construction of electrochemical sensors. In this work, we review the most recent advancements of MOF-based electrochemical sensors for the detection of electroactive small molecules and biological macromolecules (e.g., DNA, proteins, and enzymes). The types and functions of MOF-based nanomaterials in terms of the design of electrochemical sensors are also discussed. Furthermore, the limitations and challenges of MOF-based electrochemical sensing devices are explored. This work should be invaluable for the development of MOF-based advanced sensing platforms.

Electrochemical Sensing of Favipiravir with an Innovative Water-Dispersible Molecularly Imprinted Polymer Based on the Bimetallic Metal-Organic Framework: Comparison of Morphological Effects

Molecularly imprinted polymers (MIPs) are widely used as modifiers in electrochemical sensors due to their high sensitivity and promise of inexpensive mass manufacturing. Here, we propose and demonstrate a novel MIP-sensor that can measure the electrochemical activity of favipiravir (FAV) as an antiviral drug, thereby enabling quantification of the concentration of FAV in biological and river water samples and in real-time. MOF nanoparticles’ application with various shapes to determine FAV at nanomolar concentrations was described. Two different MOF nanoparticle shapes (dodecahedron and sheets) were systematically compared to evaluate the electrochemical performance of FAV. After carefully examining two different morphologies of MIP-Co-Ni@MOF, the nanosheet form showed a higher performance and efficiency than the nanododecahedron. When MIP-Co/Ni@MOF-based and NIP-Co/Ni@MOF electrodes (nanosheets) were used instead, the minimum target concentrations detected were 7.5 × 10−11 (MIP-Co-Ni@MOF) and 8.17 × 10−9 M (NIP-Co-Ni@MOF), respectively. This is a significant improvement (>102), which is assigned to the large active surface area and high fraction of surface atoms, increasing the amount of greater analyte adsorption during binding. Therefore, water-dispersible MIP-Co-Ni@MOF nanosheets were successfully applied for trace-level determination of FAV in biological and water samples. Our findings seem to provide useful guidance in the molecularly imprinted polymer design of MOF-based materials to help establish quantitative rules in designing MOF-based sensors for point of care (POC) systems.

The role of MOF based nanocomposites in the detection of phenolic compounds for environmental remediation- A review

Phenolic compounds would be the emerging pollutant by 2050, because of their wide spread applicability in daily life and therefore the adoption of suitable detection methods in which identification and separation of isomers is highly desirable. Owing to the fascinating features, Metal-organic framework (MOF), a class of reticular materials holds a large surface area with tunable shape and adjustable porosity will provide strong interaction with analytes through abundant functional groups resulting in high selectivity towards electrochemical determination of phenolic isomers. Nevertheless, the sensing performance can still be further improved by building MOF network (intrinsic resistance) with functional (conducting) materials, resulting in MOF based nanocomposite. Herein, this review provides the summary of MOF based nanocomposites for electrochemical sensing of phenolic compounds developed from 2015. In this review, we discussed the demerits of pristine MOF as electrode materials, and the requirement of new class of MOF with functional materials such as nanomaterials, carbon nanotubes, graphene and MXene. The history and evolution of MOF nanocomposite-based materials are discussed and also featured the impressive physical and chemical properties. Besides this review discusses the factors influencing the conducting pathway and mass transport of MOF based nanocomposite for enhanced sensing performance of phenolic compounds with suitable mechanistic illustrations. Finally, the major challenges governing the determination of phenolic compounds and the future advancements required for the development of MOF based electrodes for various applications are highlighted.

Electrochemical sensing of copper (II) ion in water using bi-metal oxide framework modified glassy carbon electrode

In this research, an electrochemical sensor was fabricated employing the metal-organic framework (MOF) deposited glassy carbon electrode (GCE) for the sensing copper ions in water with high sensitivity. The porous nanostructured MOF was characterized through Transmission electron microscope, scanning electron microscope and X-ray diffraction analysis. The Bi-MOF nanostructure deposited GCE (Bi-MOF/GCE) was fabricated by drop-casting a suspension of Bi-MOF in water on GCE surface. The performance of modified electrode in the presence and absence of heavy metal ions such as Cd²⁺, Hg²⁺ As³⁺, Pb²⁺ and Cu²⁺ was determined by the cyclic voltammetry in deionised water within the scan rate range of 25 and 300 mVs^-1. The Bi-MOF/GCE displayed highest anodic and cathodic peak current for Cu²⁺ ions than other metal ions, which was enhanced linearly within the scan rate range of 10-100 mV s^-1. Under the employed experimental conditions, the fabricated Bi-MOF/GCE based electrochemical sensor showed an outstanding routine in the determination of copper with a lowest sensing limit of 1 × 10^-5 M, wide linear range variation, strong interaction between metal ions and Bi-MOF. It has long-term stability and good reproducibility. The Bi-MOF/GCE electrode was successfully tested to detect Cu²⁺ in tap water with acceptable results.

Self-luminescent europium based metal organic frameworks nanorods as a novel electrochemiluminescence chromophore for sensitive ulinastatin detection in biological samples

In this work, we developed a novel electrochemiluminescence (ECL) biosensor for ulinastatin (UTI) detection based on self-luminescent metal-organic framework (L-MOF) nanomaterials. The L-MOFs could be simply prepared by one-pot methods using Eu³⁺ and 4,4',4″-s-triazine-1,3,5-triyltri-m-aminobenzoic acid (H₃TATAB) as the metallic center and organic ligand, respectively. The Eu-TATAB exhibited high efficiency and stable ECL performance when using K₂S₂O₈ as coreactant. For the established biosensor, Eu-TATAB was both used as the ECL chromophore and protein carrier due to its outstanding biocompatibility and large superficial area, which could load sufficient antibodies to link with antigen in the biosensor for subsequent detection. The established sandwich ECL biosensor showed a wide linear range of 0.1 ng mL^-1 - 10⁵ ng mL^-1 and a low limit of detection of 9.7 pg mL^-1 for UTI detection. In addition, the developed ECL biosensor could also be successfully applied to the real UTI sample determination in serum. The reported biosensor strategy could provide a guide for developing more other novel and promising high-performance ECL nanomaterials, and also be used as a potential method for ultrasensitive UTI detection in disease research.

Toxicological Impact and in Vivo Tracing of Rhodamine Functionalised ZIF-8 Nanoparticles

Metal Organic Frameworks (MOFs) are extensively used for a wide range of applications due to their exceptionally high surface area. MOF particles are conventionally in micron size, but the nanosized MOFs show good transportation/mobility due to their small size, and when combined with the high surface area of MOFs, it makes MOF nanoparticles an ideal candidate to study for environmental remediation. Therefore, it is important to study the ecotoxicological impact of these MOFs. In this study, we developed rhodamine labelled nanoparticles of zinc imidazolate metal organic framework (ZIF-8 MOFs) as a means of in vivo tracing the MOF translocation in C. elegans. Rhodamine B isothiocyanate functionalized ZIF-8 MOFs nanoparticles (RBITC@ZIF-8 MOF nanoparticles; size 44 ± 7 nm) were fed to the worms naturally within a concentration range of 0.16–16.4 μg mg⁻¹. Fluorescence was detected in the pharyngeal and gut lumen regions of the worms after 4 h of treatment, for exposure concentrations >0.163 μg mg⁻¹. A higher intensity of fluorescence was observed at the end of 24 h for all exposure concentrations. Worms treated with RBITC@ZIF-8 MOF concentrations of ≥1.63 μg mg⁻¹ for 24 h showed a bright stable fluorescence signal at the tail region. The uptake of RBITC@ZIF-8 MOF for an exposure concentration of 0.163, 1.63, and 8.2 μg mg⁻¹ was found to be 52.1, 11.4 and 28.6%, respectively. Through this study, we showed that RBITC@ZIF-8 MOFs can be exposed to C. elegans and imaged at low concentrations of ∼0.16 μg mg⁻¹.

Growth of Fe-BDC Metal Organic Frameworks onto functionalized Si (111) surfaces

The realization of metal organic frameworks (MOFs) layers onto solid surfaces is a prerequisite for their integration into devices. This work reports the direct growth of Fe 3+ / benzene di-carboxylate MOFs onto functionalized silicon surfaces, compatible with a wide range of MOF synthesis conditions. The co-nucleation and growth of different crystalline phases are evidenced, whose coverage depends on the surface chemistry and/or the solution composition. Three structural phases - the cubic MIL-101(Fe), a hexagonal phase with a structure close to MOF-235 and a MIL-53(Fe) with a monoclinic symmetry - were identified through characteristic crystal shapes and their structural parameters inferred from X-Ray Diffraction. In addition to the oriented growth of 3D crystallites, the formation of two-dimensional MIL-101 nano-crystallites or thin layers/islands exhibiting extended monocrystalline domains with (111) texture is also demonstrated through high-resolution Atomic Force Microscopy. Post-synthesis treatments reveal a weak adhesion of the hexagonal phase indicating a different surface anchoring.

Immobilization strategies for porphyrin-based molecular catalysts for the electroreduction of CO2

The ever-growing level of carbon dioxide (CO2) in our atmosphere, is at once a threat and an opportunity. The development of sustainable and cost-effective pathways to convert CO2 to value-added chemicals is central to reducing its atmospheric presence. Electrochemical CO2 reduction reactions (CO2RRs) driven by renewable electricity are among the most promising techniques to utilize this abundant resource; however, in order to reach a system viable for industrial implementation, continued improvements to the design of electrocatalysts is essential to improve the economic prospects of the technology. This review summarizes recent developments in heterogeneous porphyrin-based electrocatalysts for CO2 capture and conversion. We specifically discuss the various chemical modifications necessary for different immobilization strategies, and how these choices influence catalytic properties. Although a variety of molecular catalysts have been proposed for CO2RRs, the stability and tunability of porphyrin-based catalysts make their use particularly promising in this field. We discuss the current challenges facing CO2RRs using these catalysts and our own solutions that have been pursued to address these hurdles.