Effect of glycosylation on biochemical characterization of recombinant phytase expressed in Pichia pastoris

Current Understanding on the Heterogenous Expression of Plastic Depolymerising Enzymes in Pichia pastoris

Enzymatic depolymerisation is increasingly recognised as a reliable and environmentally friendly method. The development of this technology hinges on the availability of high-quality enzymes and associated bioreaction systems for upscaling biodegradation. Microbial heterologous expression systems have been studied for meeting this demand. Among these systems, the Pichia pastoris expression system has emerged as a widely used platform for producing secreted heterologous proteins. This article provides an overview of studies involving the recombinant expression of polymer-degrading enzymes using the P. pastoris expression system. Research on P. pastoris expression of interested enzymes with depolymerising ability, including cutinase, lipase, and laccase, are highlighted in the review. The key factors influencing the heterologous expression of polymer-degrading enzymes in P. pastoris are discussed, shedding light on the challenges and opportunities in the development of depolymerising biocatalysts through the P. pastoris expression system.

Advances in microbial exoenzymes bioengineering for improvement of bioplastics degradation

Plastic pollution has become a major global concern, posing numerous challenges for the environment and wildlife. Most conventional ways of plastics degradation are inefficient and cause great damage to ecosystems. The development of biodegradable plastics offers a promising solution for waste management. These plastics are designed to break down under various conditions, opening up new possibilities to mitigate the negative impact of traditional plastics. Microbes, including bacteria and fungi, play a crucial role in the degradation of bioplastics by producing and secreting extracellular enzymes, such as cutinase, lipases, and proteases. However, these microbial enzymes are sensitive to extreme environmental conditions, such as temperature and acidity, affecting their functions and stability. To address these challenges, scientists have employed protein engineering and immobilization techniques to enhance enzyme stability and predict protein structures. Strategies such as improving enzyme and substrate interaction, increasing enzyme thermostability, reinforcing the bonding between the active site of the enzyme and substrate, and refining enzyme activity are being utilized to boost enzyme immobilization and functionality. Recently, bioengineering through gene cloning and expression in potential microorganisms, has revolutionized the biodegradation of bioplastics. This review aimed to discuss the most recent protein engineering strategies for modifying bioplastic-degrading enzymes in terms of stability and functionality, including enzyme thermostability enhancement, reinforcing the substrate binding to the enzyme active site, refining with other enzymes, and improvement of enzyme surface and substrate action. Additionally, discovered bioplastic-degrading exoenzymes by metagenomics techniques were emphasized.

Glycosylation Circuit Enables Improved Catalytic Properties for Recombinant Alkaline Phosphatase

Protein glycosylation is one of the most crucial and common post-translational modifications. It plays a fate-determining role and can alter many properties of proteins. Here, we engineered a Campylobacter jejuni N-linked glycosylation machinery by overexpressing one of the core glycosylation-related enzymes, PgIB, to increase the glycosylation rate. It has been previously shown that by utilizing N-linked glycosylation, certain recombinant proteins have been furnished with improved features, such as stability and solubility. We utilized N-linked glycosylation using an engineered glycosylation pathway to glycosylate a model enzyme, the alkaline phosphatase (ALP) enzyme in Escherichia coli. We have investigated the effects of glycosylation on enzyme properties. Considering the glycosylation mechanism is highly dependent on accessibility of the glycosylation tag, ALP constructs carrying the glycosylation tag at different locations of the gene have been constructed, and glycosylation rates have been calculated. Our results showed that, upon glycosylation, ALP features in terms of thermostability, proteolytic stability, tolerance to suboptimal pH, and denaturing conditions are dramatically improved. The results indicated that the N-linked glycosylation mechanism can be employed for protein manipulation for industrial applications.

Conditioning of Feed Material Prior to Feeding: Approaches for a Sustainable Phosphorus Utilization

A circular phosphorus (P) bioeconomy is not only worthwhile for conserving limited mineral P reservoirs, but also for minimizing negative environmental impacts caused by human-made alterations. Although P is an essential nutrient, most of the P in concentrates based on cereals, legumes and oilseed byproducts is organically bound to phytate. The latter cannot be efficiently utilized by monogastric animals and is therefore diluted into the environment through the manure pathway. This review examines various strategies for improved P utilization in animals and reflects the respective limitations. The strategies considered include feeding of debranned feedstuffs, pre-germinated feed, co-feeding of phytase and feeding material with high native phytase activity. All these approaches contribute to an improved P bioavailability. However, about half of the organic P content continues to be excreted and therefore remains unused by the animals. Nevertheless, technologies for an efficient utilization of P from cereal-based feed already exist; however, these are not industrially established. Conditioning feed material prior to feeding fosters P-reduced feed; meanwhile, P bound to phytate can be recovered. Based on known techniques for P separation and solubilisation from cereal products and phytate conversion, potential designs for feed material conditioning processes are proposed and evaluated.

Heterologous expression of EUGT11 from Oryza sativa in Pichia pastoris for highly efficient one-pot production of rebaudioside D from rebaudioside A

Rebaudioside D is a promising sweetener due to its zero calorie and high sweetness. Here, a transglucosylase gene eugt11 from Oryza sativa was for the first time expressed in Pichia pastoris, and transformant XE-3 showed the highest expression levels in pH 5.5 BMMY media containing 0.75% methanol. The affinity-purified EUGT11 from XE-3 displayed the highest activity at pH 6.0-6.5 and 45 °C, compared to pH 8.5 and 35 °C for EUGT11 from Escherichia coli. One-pot synthesis with orthogonal design was employed to optimize the rebaudioside D production using XE-3, and the initial pH 7.0 of the medium appears to be a significant factor and delivers the highest conversion efficiency. A two-step temperature-control strategy was developed, and a conversion rate of 95.31% was achieved at 28/35 °C vs. 62.41% in a one-step process at 28 °C. This study provides a high-efficient whole-cell biocatalysts technology for the sweetener production.

Heterologous Expression of Histidine Acid Phytase From Pantoea sp. 3.5.1 in Methylotrophic Yeast Pichia Pastoris

Background and Objective:

The major storage form of phosphorus in plant-derived feed is presented by phytates and not digested by animals. Phytases are able to hydrolyze phytates and successfully used as feed additives. Nevertheless, nowadays, there is a constant search of new phytases and expression systems for better production of these enzymes. In this study, we describe cloning and expression of gene encoding histidine acid phytase fromPantoeasp. 3.5.1 using methylotrophic yeastPichia pastorisas the host.

Methods:

The phytase gene was placed under the control of the methanol-inducible AOX1 promoter and expressed inP. pastoris. Experiments of small-scale phytase expression and activity assays were used to test recombinant colonies. Four different signal peptides were screened for better secretion of phytase byP. pastoris. After 36 h of methanol induction in shake flasks, the maximum extracellular phytase activity (3.2 U/ml) was observed inP. pastorisstrain with integrated construct based on pPINK-HC vector andKluyveromyces maxianusinulinase gene signal sequence. This phytase was isolated and purified using affinity chromatography.

Results:

Recombinant phytase was a glycosylated protein, had a molecular weight of around 90 kDa and showed maximum activity at pH 4.0 and at 50°C. Recombinant phytase had excellent thermal stability – it retained high residual activity (100% ± 2%) after 1 hour of heat treatment at 70°C.

Conclusion:

The enhanced thermostability of the recombinant phytase, its expression provided by strong inducible promotor and the effectively designed expression cassette, the simple purification procedure of the secreted enzyme, and the possibility of large-scale expression make the foundation for further production of this bacterial phytase inP. pastorisat an industrial scale.

High-Level Expression and Biochemical Properties of A Thermo-Alkaline Pectate Lyase From Bacillus sp. RN1 in Pichia pastoris With Potential in Ramie Degumming

Pectate lyases play an essential role in textiles, animal feed, and oil extraction industries. Pichia pastoris can be an ideal platform for pectate lyases production, and BspPel (a thermo-alkaline pectate lyase from Bacillus sp. RN1) was overexpressed by combined strategies, reaching 1859 U/mL in a 50 L fermentator. It displayed the highest activity at 80°C, and maintained more than 60% of the activity between 30 and 70°C for 1 h. It showed an optimal pH of 10.0, and exhibited remarkable stability over a wider pH range (3.0-11.0), retaining more than 80.0% of enzyme activity for 4 h. The K_m and k_cat of BspPel on PGA (polygalacturonic acid) was 2.19 g L^–1 and 116.1 s^–1, respectively. The activity was significantly enhanced by Ca²⁺, Mn²⁺, and Cu²⁺, and a slight increase was observed with the addition of Ba²⁺ and Mg²⁺. Scanning electron microscope was used to show the degumming efficiency of BspPel on ramie fibers. The loss weight was 9.2% when treated with crude enzyme supernatant and 20.8% when treated with the enzyme-chemical method, which was higher than the 14.2% weight loss in the positive control treated with 0.5% (w/v) NaOH alone. In conclusion, BspPel could be a good candidate for the ramie degumming industry.

Glycosylation influences activity, stability and immobilization of the feruloyl esterase 1a from Myceliophthora thermophila

Heterologous protein production is widely used in industrial biotechnology. However, using non-native production hosts can lead to enzymes with altered post-translational modifications, such as glycosylation. We have investigated how production in a non-native host affects the physicochemical properties and enzymatic activity of a feruloyl esterase from Myceliophthora thermophila, MtFae1a. The enzyme was produced in two microorganisms that introduce glycosylation (M. thermophila and Pichia pastoris) and in Escherichia coli (non-glycosylated). Mass spectrometric analysis confirmed the presence of glycosylation and revealed differences in the lengths of glycan chains between the enzymes produced in M. thermophila and P. pastoris. The melting temperature and the optimal temperature for activity of the non-glycosylated enzyme were considerably lower than those of the glycosylated enzymes. The three MtFae1a versions also exhibited differences in specific activity and specificity. The catalytic efficiency of the glycosylated enzymes were more than 10 times higher than that of the non-glycosylated one. In biotechnology, immobilization is often used to allow reusing enzyme and was investigated on mesoporous silica particles. We found the binding kinetics and immobilization yield differed between the enzyme versions. The largest differences were observed when comparing enzymes with and without glycosylation, but significant variations were also observed between the two differently glycosylated enzymes. We conclude that the biotechnological value of an enzyme can be optimized for a specific application by carefully selecting the production host.

Partial purification and characterization of phytase from Aspergillus foetidus MTCC 11682

Phytase is a phosphatase enzyme widely used as feed additive to release inorganic phosphorus from plant phytate and enhance its uptake in monogastric animals. Although engineered fungal phytases are used most, a natural enzyme gives opportunity to understand novel properties, if any. In the current study, a novel fungal strain, Aspergillus foetidus MTCC 11682 was immobilized on poly urethane cubes and used for phytase production, purification and molecular characterization. Phytase produced by this method was partially purified by ammonium sulphate precipitation and Sephacryl S-200HR gel filtration to 23.4-fold (compared to crude extract) with recovery of 13% protein. Electrophoresis analysis revealed that phytase has molecular weight of 90.5 kDa on non-reducing and 129.6 kDa on reducing SDS-PAGE. The purified phytase exhibited a wider pH and temperature stability. Analysis of the cloned sequence showed that the gene has 1176 bp that encodes for a peptide of 391 amino acids of the core catalytic region. It was also found that phytase from A. foetidus has a sequence identity of 99% with the phytase gene of other Aspergillus species at nucleotide level and 100% at protein level in A. niger, A. awamori, A. oryzae. In silico analysis of sequence identified the presence of two consecutive and one non-consecutive intra chain disulfide bonds in the phytase. This probably contributed to the differential migration of phytase on reducing and non-reducing SDS-PAGE. There are predicted 11 O-glycosylation sites and 8 N-glycosylation sites, possibly contributed to an enhanced stability of enzyme produced by this organism. This study opened up a new horizon for exploring the novel properties of phytase for other applications.

Aspergillus oryzae S2 AmyA amylase expression in Pichia pastoris: production, purification and novel properties

A synthetic cDNA-AmyA gene was cloned and successfully expressed in Pichia pastoris as a His-tagged enzyme under the methanol inducible AOX1 promoter. High level of extracellular amylase production of 72 U/mL was obtained after a 72 h induction by methanol. As expected, the recombinant strain produced only the AmyA isoform since the host is a protease deficient strain. Besides, the purified r-AmyA showed a molecular mass of 54 kDa, the same pH optimum equal to 5.6 but a higher thermoactivity of 60 °C against 50 °C for the native enzyme. Unlike AmyA which maintained 50% of its activity after a 10-min incubation at 60 °C, r-AmyA reached 45 min. The higher thermoactivity and thermostability could be related to the N-glycosylation. The r-AmyA activity was enhanced by 46% and 45% respectively in the presence of 4 mM Fe²⁺ and Mg²⁺ ions. This enzyme was more efficient in bread-making since such ions were reported to have a positive impact on the nutriment quality and the rheological characteristics of the wheat flour dough. The thermoactivity/thermostability as well as the iron and magnesium activations could also be ascribed to the presence of an additional C-terminal loop containing the His tag.

Extracellular Phytase Production by the Wine Yeast S. cerevisiae (Finarome Strain) during Submerged Fermentation

One of the key steps in the production of phytases of microbial origin is selection of culture parameters, followed by isolation of the enzyme and evaluation of its catalytic activity. It was found that conditions for S. cerevisiae yeast culture, strain Finarome, giving the reduction in phytic acid concentration of more than 98% within 24 h of incubation were as follows: pH 5.5, 32 °C, continuous stirring at 80 rpm, the use of mannose as a carbon source and aspartic acid as a source of nitrogen. The highest catalytic activity of the isolated phytase was observed at 37 °C, pH 4.0 and using phytate as substrate at concentration of 5.0 mM. The presence of ethanol in the medium at a concentration of 12% v/v reduces the catalytic activity to above 60%. Properties of phytase derived from S. cerevisiae yeast culture, strain Finarome, indicate the possibility of its application in the form of a cell’s free crude protein isolate for the hydrolysis of phytic acid to improve the efficiency of alcoholic fermentation processes. Our results also suggest a possibility to use the strain under study to obtain a fusant derived with specialized distillery strains, capable of carrying out a highly efficient fermentation process combined with the utilization of phytates.

Stabilizing Leaf and Branch Compost Cutinase (LCC) with Glycosylation: Mechanism and Effect on PET Hydrolysis

Cutinases are polyester hydrolases that show a remarkable capability to hydrolyze polyethylene terephthalate (PET) to its monomeric units. This revelation has stimulated research aimed at developing sustainable and green cutinase-catalyzed PET recycling methods. Leaf and branch compost cutinase (LCC) is particularly suited toward these ends given its relatively high PET hydrolysis activity and thermostability. Any practical enzymatic PET recycling application will require that the protein have kinetic stability at or above the PET glass transition temperature (T_g, i.e., 70 °C). This paper elucidates the thermodynamics and kinetics of LCC conformational and colloidal stability. Aggregation emerged as a major contributor that reduces LCC kinetic stability. In its native state, LCC is prone to aggregation owing to electrostatic interactions. Further, with increasing temperature, perturbation of LCC's tertiary structure and corresponding exposure of hydrophobic domains leads to rapid aggregation. Glycosylation was employed in an attempt to impede LCC aggregation. Owing to the presence of three putative N-glycosylation sites, expression of native LCC in Pichia pastoris resulted in the production of glycosylated LCC (LCC-G). LCC-G showed improved stability to native state aggregation while increasing the temperature for thermal induced aggregation by 10 °C. Furthermore, stabilization against thermal aggregation resulted in improved catalytic PET hydrolysis both at its optimum temperature and concentration.

Characterization of Full-Length and Truncated Recombinant κ-Carrageenase Expressed in Pichia pastoris

κ-Carrageenase belongs to glycoside hydrolase family 16 and cleaves the β-(1→4) linkages of κ-carrageenan. In this study, genes encoding the full-length (cgkZ), Por secretion tail-truncated (cgkZΔPst) and carbohydrate binding domain-truncated (cgkZΔCBM) κ-carrageenase proteins were expressed in Pichia pastoris. The copy numbers of gene cgkZ, cgkZΔPst and cgkZΔCBM were 7, 7 and 6, respectively. The enzymatic activities of recombinant enzymes cgkZ, cgkZΔPst and cgkZΔCBM reached 4.68, 5.70, and 3.02 U/mL, respectively, after 120 h of shake flask fermentation at 22°C and pH 6 in the presence of 1 % (v/v) methanol. The molecular weights of recombinant cgkZ, cgkZΔPst, and cgkZΔCBM were approximately 65, 45, and 40 kDa; their K_m values were 2.07, 1.85, and 1.04 mg/mL; and they exhibited optimal activity at 45-50°C and pH 6-7. All the recombinant enzymes were stimulated by Na⁺, Mg²⁺, Ca²⁺, and dithiothreitol. The end-products of enzymatic hydrolysis were mainly composed of κ-carrageenan tetrasaccharide and hexasaccharide. The removal of the Por secretion tail of κ-carrageenase promoted the transcription of κ-carrageenase gene, enhancing the specific activity of κ-carrageenase without significantly changing its catalytic properties. Although the transcription level of κ-carrageenase gene after the removal of the carbohydrate binding domain was relatively high, the specific activity of the recombinant enzyme significantly decreased. The comprehensive application of the P. pastoris expression system combined with the rational modification of genes may provide a novel approach for the heterologous expression of various marine enzymes with high activities.

Tannase sequence from a xerophilic Aspergillus niger Strain and production of the enzyme in Pichia pastoris

Tannin acyl hydrolases, or tannases (EC 3.1.1.20), are enzymes with potential biotechnological applications. In this work, we describe the gene and amino acid sequences of the tannase from Aspergillus niger GH1. In addition, we engineered Pichia pastoris strains to produce and secrete the enzyme, and the produced tannase was characterized biochemically. The nucleotide sequence of mature tannase had a length of 1,686 bp, and encodes a protein of 562 amino acids. A molecular model of mature A. niger GH1 tannase showed the presence of two structural domains, one with an α/β-hydrolase fold and one lid domain that covers the catalytic site, likely being residues Ser-196, Asp-448, and His-494 the putative catalytic triad, which are connected by a disulfide bond between the neighboring cysteines, Cys-195 and Cys-495. A 120-ml shake flask culture with a constructed recombinant P. pastoris strain showed extracellular tannase activity at 48 h induction of 0.57 U/ml. The produced tannase was N-glycosylated, consisted of two subunits, likely linked by a disulfide bond, and had an optimum pH of 5.0 and optimum temperature of 20 °C. These biochemical properties differed from those of native A. niger GH1 tannase. The recombinant tannase could be suitable for food and beverage applications.

N-Glycosylation Improves the Pepsin Resistance of Histidine Acid Phosphatase Phytases by Enhancing Their Stability at Acidic pHs and Reducing Pepsin's Accessibility to Its Cleavage Sites

N-Glycosylation can modulate enzyme structure and function. In this study, we identified two pepsin-resistant histidine acid phosphatase (HAP) phytases from Yersinia kristensenii (YkAPPA) and Yersinia rohdei (YrAPPA), each having an N-glycosylation motif, and one pepsin-sensitive HAP phytase from Yersinia enterocolitica (YeAPPA) that lacked an N-glycosylation site. Site-directed mutagenesis was employed to construct mutants by altering the N-glycosylation status of each enzyme, and the mutant and wild-type enzymes were expressed in Pichia pastoris for biochemical characterization. Compared with those of the N-glycosylation site deletion mutants and N-deglycosylated enzymes, all N-glycosylated counterparts exhibited enhanced pepsin resistance. Introduction of the N-glycosylation site into YeAPPA as YkAPPA and YrAPPA conferred pepsin resistance, shifted the pH optimum (0.5 and 1.5 pH units downward, respectively) and improved stability at acidic pH (83.2 and 98.8% residual activities at pH 2.0 for 1 h). Replacing the pepsin cleavage sites L197 and L396 in the immediate vicinity of the N-glycosylation motifs of YkAPPA and YrAPPA with V promoted their resistance to pepsin digestion when produced in Escherichia coli but had no effect on the pepsin resistance of N-glycosylated enzymes produced in P. pastoris. Thus, N-glycosylation may improve pepsin resistance by enhancing the stability at acidic pH and reducing pepsin's accessibility to peptic cleavage sites. This study provides a strategy, namely, the manipulation of N-glycosylation, for improvement of phytase properties for use in animal feed.

Cloning and Expression of Phytase appA Gene from Shigella sp. CD2 in Pichia pastoris and Comparison of Properties with Recombinant Enzyme Expressed in E. coli

The phytase gene appA_S was isolated from Shigella sp. CD2 genomic library. The 3.8 kb DNA fragment contained 1299 bp open reading frame encoding 432 amino acid protein (AppA_S) with 22 amino acid signal peptide at N-terminal and three sites of N-glycosylation. AppA_S contained the active site RHGXRXP and HDTN sequence motifs, which are conserved among histidine acid phosphatases. It showed maximum identity with phytase AppA of Escherichia coli and Citrobacter braakii. The appA_S was expressed in Pichia pastoris and E. coli to produce recombinant phytase rAppA_P and rAppA_E, respectively. Purified glycosylated rAppA_P and nonglycosylated rAppA_E had specific activity of 967 and 2982 U mg^-1, respectively. Both had pH optima of 5.5 and temperature optima of 60°C. Compared with rAppA_E, rAppA_P was 13 and 17% less active at pH 3.5 and 7.5 and 11 and 18% less active at temperature 37 and 50°C, respectively; however, it was more active at higher incubation temperatures. Thermotolerance of rAppA_P was 33% greater at 60°C and 24% greater at 70°C, when compared with rAppA_E. Both the recombinant enzymes showed high specificity to phytate and resistance to trypsin. To our knowledge, this is the first report on cloning and expression of phytase from Shigella sp.

Influence of surface charge, binding site residues and glycosylation on Thielavia terrestris cutinase biochemical characteristics

Cutinases are esterases of industrial importance for applications in recycling and surface modification of polyesters. The cutinase from Thielavia terrestris (TtC) is distinct in terms of its ability to retain its stability and activity in acidic pH. Stability and activity in acidic pHs are desirable for esterases as the pH of the reaction tends to go down with the generation of acid. The pH stability and activity are governed by the charged state of the residues involved in catalysis or in substrate binding. In this study, we performed the detailed structural and biochemical characterization of TtC coupled with surface charge analysis to understand its acidic tolerance. The stability of TtC in acidic pH was rationalized by evaluating the contribution of charge interactions to the Gibbs free energy of unfolding at varying pHs. The activity of TtC was found to be limited by substrate binding affinity, which is a function of the surface charge. Additionally, the presence of glycosylation affects the biochemical characteristics of TtC owing to steric interactions with residues involved in substrate binding.

Expression and characterization of a cutinase (AnCUT2) from Aspergillus niger

Cutin hydrolase (EC 3.1.1.74), an extracellular polyesterase found in pollens, bacteria and fungi, is an efficient catalyst that exhibits hydrolytic activity on a variety of water-soluble esters, synthetic fibers, plastics and triglycerides. Thus, cutinase can be used in various applications such as ester synthesis, bio-scouring, food and detergent industries. Ancut2 is one of five genes encoding cutinases present in the Aspergillus niger ATCC 10574 genome. The cDNA of Ancut2 comprising of an open reading frame of 816 bp encoding a protein of 271 amino acid residues, was isolated and expressed in Pichia pastoris. The partially purified recombinant cutinase exhibited a molecular mass of approximately 40 kDa. The enzyme showed highest activity at 40°C with a preference for acidic pH (5.0-6.0). AnCUT2 showed hydrolytic activity towards various p-nitrophenyl esters with preference towards shorter chain esters such as p-nitrophenyl butyrate (C4). Scanning Electron Microscopy demonstrated that AnCUT2 was capable of modifying surfaces of synthetic polycaprolactone and polyethylene terephthalate plastics. The properties of this enzyme suggest that it may be applied in synthetic fiber modification and fruit processing industries.

Development of a Rapid Immunochromatographic Lateral Flow Device Capable of Differentiating Phytase Expressed from Recombinant Aspergillus niger phyA2 and Genetically Modified Corn

Phytase is a phosphohydrolase considered highly specific for the degradation of phytate to release bound phosphorus for animal consumption and aid in the reduction of environmental nutrient loading. New sources of phytase have been sought that are economically and efficiently productive including the construction of genetically modified (GM) phytase products designed to bypass the costs associated with feed processing. Four monoclonal antibodies (EH10a, FA7, AF9a, and CC1) raised against recombinant Aspergillus niger phyA2 were used to develop a highly specific and sensitive immunochromatographic lateral flow device for rapid detection of transgenic phytase, such as in GM corn. Antibodies sequentially paired and tested along lateral flow strips showed that the EH10a-FA7 antibody pair was able to detect the recombinant yeast-phytase at 5 ng/mL, whereas the AF9a-CC1 antibody pair to GM phytase corn was able to detect at 2 ng/mL. Concurrent to this development, evidence was revealed which suggests that antibody binding sites may be glycosylated.

Cloning and functional characterization of two abiotic stress-responsive Jerusalem artichoke (Helianthus tuberosus) fructan 1-exohydrolases (1-FEHs)

Two fructan hydrolases were previously reported to exist in Jerusalem artichoke (Helianthus tuberosus) and one native fructan-β-fructosidase (1-FEH) was purified to homogeneity by SDS-PAGE, but no corresponding cDNA was cloned. Here, we cloned two full-length 1-FEH cDNA sequences from Jerusalem artichoke, named Ht1-FEH I and Ht1-FEH II, which showed high levels of identity with chicory 1-FEH I and 1-FEH II. Functional characterization of the corresponding recombinant proteins in Pichia pastoris X-33 demonstrated that both Ht1-FEHs had high levels of hydrolase activity towards β(2,1)-linked fructans, but low or no activity towards β(2,6)-linked levan and sucrose. Like other plant FEHs, the activities of the recombinant Ht1-FEHs were greatly inhibited by sucrose. Real-time quantitative PCR analysis showed that Ht1-FEH I transcripts accumulated to high levels in the developing leaves and stems of artichoke, whereas the expression levels of Ht1-FEH II increased in tubers during tuber sprouting, which implies that the two Ht1-FEHs play different roles. The levels of both Ht1-FEH I and II transcript were significantly increased in the stems of NaCl-treated plants. NaCl treatment also induced transcription of both Ht1-FEHs in the tubers, while PEG treatments slightly inhibited the expression of Ht1-FEH II in tubers. Analysis of sugar-metabolizing enzyme activities and carbohydrate concentration via HPLC showed that the enzyme activities of 1-FEHs were increased but the fructose content was decreased under NaCl and PEG treatments. Given that FEH hydrolyzes fructan to yield Fru, we discuss possible explanations for the inconsistency between 1-FEH activity and fructan dynamics in artichokes subjected to abiotic stress.

Characterization of an N-glycosylated Bacillus subtilis leucine aminopeptidase expressed in Pichia pastoris

Aminopeptidase is an important flavorsome especially in protein hydrolysate debittering by removing hydrophobic amino acid residue at the N-terminal end. Besides, it is also applied to preparation of active peptides and analysis of protein sequence. In this study, leucine aminopeptidase from Bacillus subtilis was cloned and expressed in Pichia pastoris, a widely used heterologous protein expression host. Then it was purified and characterized. After methanol induction for 96 h, the aminopeptidase activity in culture supernatant reached 28.4 U ml(À1) , which was 7.1 times that of wild strain B. subtilis Zj016. The optimal temperature and pH of the purified recombinant enzyme were 60 °C and 8.5, respectively. The purified aminopeptidase was stable within 30-60 °C and pH 8.0-9.0. It was intensively inhibited by Ni(2β) , Ca(2β) , DL-dithiothreitol (DTT) and ethylene diamine tetraacetic acid (EDTA), but activated by Co(2β) . The Km toward leucine-p-nitroanilines (Leu-pNA) of the enzyme was 0.97 mM. The sequence analysis of aminopeptidase indicated three potential N-glycosylation sites and it was further verified via MALDI-TOF-MS analysis. Consequently, the N-glycosylated aminopeptidase exhibited higher thermostability and catalytic efficiency. The purified enzyme exhibited two bands through sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) while a single band can be identified when the enzyme was deglycosylated. Circular dichroism spectroscopy indicated that the secondary structure of recombinant aminopeptidase was similar to the wild-type.

Expression of Aspergillus nidulans phy gene in Nicotiana benthamiana produces active phytase with broad specificities

A full-length phytase gene (phy) of Aspergillus nidulans was amplified from the cDNA library by polymerase chain reaction (PCR), and it was introduced into a bacterial expression vector, pET-28a. The recombinant protein (rPhy-E, 56 kDa) was overexpressed in the insoluble fraction of Escherichia coli culture, purified by Ni-NTA resin under denaturing conditions and injected into rats as an immunogen. To express A. nidulans phytase in a plant, the full-length of phy was cloned into a plant expression binary vector, pPZP212. The resultant construct was tested for its transient expression by Agrobacterium-infiltration into Nicotiana benthamiana leaves. Compared with a control, the agro-infiltrated leaf tissues showed the presence of phy mRNA and its high expression level in N. benthamiana. The recombinant phytase (rPhy-P, 62 kDa) was strongly reacted with the polyclonal antibody against the nonglycosylated rPhy-E. The rPhy-P showed glycosylation, two pH optima (pH 4.5 and pH 5.5), an optimum temperature at 45~55 °C, thermostability and broad substrate specificities. After deglycosylation by peptide-N-glycosidase F (PNGase-F), the rPhy-P significantly lost the phytase activity and retained 1/9 of the original activity after 10 min of incubation at 45 °C. Therefore, the deglycosylation caused a significant reduction in enzyme thermostability. In animal experiments, oral administration of the rPhy-P at 1500 U/kg body weight/day for seven days caused a significant reduction of phosphorus excretion by 16% in rat feces. Besides, the rPhy-P did not result in any toxicological changes and clinical signs.

Expression and biochemical characterization of recombinant human epididymis protein 4

Whey acidic proteins (WAP) belong to a large gene family of antibacterial peptides that perform critical immune system functions. The function of human epididymis protein 4 (HE4), a 124-amino acid long polypeptide that has two whey acidic protein four-disulfide core (WFDC) domains, is not well studied. Here, a fusion gene encoding the HE4 protein fused to an IgG1 Fc domain was constructed. The recombinant HE4 protein was expressed as a secretory protein in Pichia pastoris and mammalian HEK293-F cells and was subsequently purified. Our data suggested that the HE4 protein produced by these two expression systems bound to both gram-negative and gram-positive bacteria, but demonstrated slightly inhibitory activity towards the growth of Staphylococcus aureus. Moreover, HE4 exhibited proteinase inhibitory activity towards trypsin, elastase, matrix metallopeptidase 9, and the secretory proteinases from Bacillus subtilis. The effects of glycosylation on the biochemical characterization of HE4 were also investigated. LC-ESI-MS glycosylation analysis showed that the high-mannose glycosylated form of HE4 expressed by P. pastoris has lower biological activity when compared to its complex-glycosylated form produced from HEK293-F cells. The implications of this are discussed, which may be provide theoretical basis for its important role in the development of cancer and innate immune system.

Glycosylation analysis of recombinant neutral protease I from Aspergillus oryzae expressed in Pichia pastoris

Neutral protease I from Aspergillus oryzae 3.042 was expressed in Pichia pastoris and its N-glycosylation properties were analyzed. After purification by nickel-affinity chromatography column, the recombinant neutral protease (rNPI) was confirmed to be N-glycosylated by periodicacid/Schiff's base staining and Endo H digestion. Moreover, the deglycosylated protein's molecular weight decreased to 43.3 kDa from 54.5 kDa analyzed by SDS-PAGE and MALDI-TOF-MS, and the hyperglycosylation extent was 21 %. The N-glycosylation site of rNPI was analyzed by nano LC-MS/MS after digesting by trypsin and Glu-C, and the unique potential site Asn41 of mature peptide was found to be glycosylated. Homology modeling of the 3D structure of rNPI indicated that the attached N-glycans hardly affected neutral protease's activity due to the great distance away from the active site of the enzyme.

Biochemical properties of glycosylation and characterization of a histidine acid phosphatase (phytase) expressed in Pichia pastoris

Phytases catalyze the cleavage of phosphate groups from phytic acid. Here, we have studied the effects of glycosylation on the properties of Aspergillus japonicus C03 phytase expressed in Pichia pastoris. The enzyme ORF of 1338 nucleotides was cloned from genomic DNA, and encoded a secreted mature protein of 446 amino acids, which included the sequence motif RHGXRX and dipeptide HD, classifying the phytase as a histidine acid phosphate. After transformation and 72h of induction, P.pastoris GS115 expressed a 75kDa protein showing 526U/mg phytase activity and 143mg/L of protein. The amino acid sequence showed 8 and 3 potential N- and O-glycosylation sites, respectively. Analysis by ESMS showed two glycoform masses of 75,467 and 72,793, which after deglycosylation decreased to 54,327 and 54,128, respectively, indicating a carbohydrate content of 27-30%. A single GlcNAc was assigned at Asn6, Asn38, Asn84, Asn99, Asn209, Asn218, Asn355 and Asn367. The recombinant phytase showed maximum activity at 50°C, a half-life of 40min, and farUVCD spectroscopy indicated a secondary structure rich in α-helix. Thermal denaturation analyses reveal the melting temperature varied from 50°C at pH 6 to a maximum of 66°C at pH 3 and pH 4.

The role of N-glycosylation sites in the activity, stability, and expression of the recombinant elastase expressed by Pichia pastoris

The Pseudomonas aeruginosa elastase (PAE), produced by Pseudomonas aeruginosa (P. aeruginosa), is a promising biocatalyst for peptide synthesis in organic solvents. As P. aeruginosa is an opportunistic pathogen, the enzyme has been heterologously over-expressed in the safe and efficient host, Pichia pastoris (P. pastoris) for its industrial application. The recombinant elastase (rPAE) contains three potential N-glycosylation sites (Asn-Xaa-Ser/Thr consensus sequences), and is heterogeneously N-glycosylated. To investigate the role of N-glycosylation in the activity, stability, and expression of rPAE, these potential N-glycosylation sites (N43, N212, and N280) were mutated using site-directed mutagenesis. Specifically the asparagine (Asn, N) residues were converted to glutamine (Gln, Q). The enzymatic activity and stability of non-glycosylated and glycosylated rPAE were then compared. The results indicated that the influence of N-glycosylation on its activity was insignificant. The non- and glycosylated isoforms of rPAE displayed similar kinetic parameters for hydrolyzing casein in aqueous medium, and when catalyzing bipeptide synthesis in 50% (v/v) DMSO, they exhibited identical substrate specificity and activity, and produced similar yields. However, N-glycosylation improved rPAE stability both in aqueous medium and in 50% (v/v) organic solvents. The half-lives of the glycosylated and non-glycosylated forms of rPAE at 70°C were 32.2 and 23.1 min, respectively. Mutation of any potential N-glycosylation site was detrimental to its expression in P. pastoris. There was a 23.9% decrease in expression of the N43Q mutant, 63.6% of the N212Q mutant, and 63.7% of the N280Q mutant compared with the wild type. Furthermore, combined mutation of these sites resulted in an additional decrease in the caseinolytic activities of the mutants. These results indicated that all of the N-glycosylation sites were necessary for high-level expression of rPAE.

Glycosylation in a mammalian expression system is critical for the production of functionally active leukocyte immunoglobulin-like receptor A3 protein

The leukocyte immunoglobulin-like receptor (LILR) A3 is a member of the highly homologous activating and inhibitory receptors expressed on leukocytes. LILRA3 is a soluble receptor of unknown functions but is predicted to act as a broad antagonist to other membrane-bound LILRs. Functions of LILRA3 are unclear primarily because of the lack of high quality functional recombinant protein and insufficient knowledge regarding its ligand(s). Here, we expressed and characterized recombinant LILRA3 (rLILRA3) proteins produced in 293T cells, Escherichia coli, and Pichia pastoris. We found that the purified rLILRA3 produced in the mammalian system was the same size as a 70-kDa native macrophage LILRA3. This is 20 kDa larger than the calculated size, suggesting significant post-translational modifications. In contrast, rLILRA3 produced in E. coli was similar in size to the unprocessed protein, but yeast-produced protein was 2-4 times larger than the unprocessed protein. Treatment with peptide-N-glycosidase F reduced the size of the mammalian cell- and yeast-produced rLILRA3 to 50 kDa, suggesting that most modifications are due to glycosylation. Consistent with this, mass spectrometric analysis of the mammalian rLILRA3 revealed canonical N-glycosylation at the predicted Asn(140), Asn(281), Asn(302), Asn(341), and Asn(431) sites. Functionally, only mammalian cell-expressed rLILRA3 bound onto the surface of monocytes with high affinity, and importantly, only this significantly abrogated LPS-induced TNFα production by monocytes. Binding to monocytes was partially blocked by β-lactose, indicating that optimally glycosylated LILRA3 might be critical for ligand binding and function. Overall, our data demonstrated for the first time that LILRA3 is a potential new anti-inflammatory protein, and optimal glycosylation is required for its functions.

Novel phytase from Pteris vittata resistant to arsenate, high temperature, and soil deactivation

Arsenate interferes with enzymatic processes and inhibits inorganic phosphorus (Pi) uptake in many plants. This study examined the role of phytase and phosphatase in arsenate tolerance and phosphorus (P) acquisition in the arsenic hyperaccumulator Pteris vittata . Enzyme-mediated hydrolysis of phytate in P. vittata extracts was not inhibited by arsenate at 5 mM or by heating at 100 °C for 10 min. Root exudates of P. vittata exhibited the highest phytase activity (18 nmol Pi mg(-1) protein min(-1)) when available P was low, allowing its growth on media amended with phytate as the sole source of P. Phosphorus concentration in P. vittata gametophyte tissue grown on phytate was equivalent to plants grown with inorganic phosphate at 2208 mg kg(-1), and arsenic was increased from 1777 to 2630 mg kg(-1). After 2 h of mixing with three soils, P. vittata phytase retained more activity, decreasing from ∼ 26 to ∼ 25 nmol Pi mg(-1) protein min(-1), whereas those from Pteris ensiformis and wheat decreased from ∼ 18 to ∼ 1 nmol Pi mg(-1) protein min(-1). These results suggest P. vittata has a uniquely stable phytase enabling its P acquisition in P-limiting soil environments. Furthermore, the P. vittata phytase has potential use as a soil amendment, a transgenic tool, or as a feed additive supplement, reducing the need for nonrenewable, polluting P fertilizers.

Design of thermostable beta-propeller phytases with activity over a broad range of pHs and their overproduction by Pichia pastoris

Thermostable phytases, which are active over broad pH ranges, may be useful as feed additives, since they can resist the temperatures used in the feed-pelleting process. We designed new beta-propeller phytases, using a structure-guided consensus approach, from a set of amino acid sequences from Bacillus phytases and engineered Pichia pastoris strains to overproduce the enzymes. The recombinant phytases were N-glycosylated, had the correct amino-terminal sequence, showed activity over a pH range of 2.5 to 9, showed a high residual activity after 10 min of heat treatment at 80°C and pH 5.5 or 7.5, and were more thermostable at pH 7.5 than a recombinant form of phytase C from Bacillus subtilis (GenBank accession no. AAC31775). A structural analysis suggested that the higher thermostability may be due to a larger number of hydrogen bonds and to the presence of P257 in a surface loop. In addition, D336 likely plays an important role in the thermostability of the phytases at pH 7.5. The recombinant phytases showed higher thermostability at pH 5.5 than at pH 7.5. This difference was likely due to a different protein total charge at pH 5.5 from that at pH 7.5. The recombinant beta-propeller phytases described here may have potential as feed additives and in the pretreatment of vegetable flours used as ingredients in animal diets.

Expression of a Bacillus phytase C gene in Pichia pastoris and properties of the recombinant enzyme

The cloning and expression of a native gene encoding a Bacillus subtilis phytase using Pichia pastoris as the host is described. In addition, the influence of N-glycosylation on the biochemical properties of the B. subtilis phytase, the influence of pH on the thermostability of the recombinant and native B. subtilis phytases, and the resistance of both phytases to shrimp digestive enzymes and porcine trypsin are also described. After 48 h of methanol induction in shake flasks, a selected recombinant strain produced and secreted 0.82 U/ml (71 mg/liter) recombinant phytase. This phytase was N-glycosylated, had a molecular mass of 39 kDa after N-deglycosylation, exhibited activity within a pH range of 2.5 to 9 and at temperatures of 25 to 70 degrees C, had high residual activity (85% +/- 2%) after 10 min of heat treatment at 80 degrees C and pH 5.5 in the presence of 5 mM CaCl(2), and was resistant to shrimp digestive enzymes and porcine trypsin. Although the recombinant Bacillus phytase had pH and temperature activity profiles that were similar to those of the corresponding nonglycosylated native phytase, the thermal stabilities of the recombinant and native phytases were different, although both were calcium concentration and pH dependent.