Marine-Inspired Polymers in Medical Adhesion

Multifunctional Natural and Synthetic Melanin for Bioelectronic Applications: A Review

Emerging material interest in bioelectronic applications has highlighted natural melanin and its derivatives as promising alternatives to conventional synthetic conductors. These materials, traditionally noted for their adhesive, antioxidant, biocompatible, and biodegradable properties, have barely been used as conductors due to their extremely low electrical activities. However, recent studies have demonstrated good conductive properties in melanin materials that promote electronic-ionic hybrid charge transfer, attributed to the formation of an extended conjugated backbone. This review examines the multifunctional properties of melanin materials, focusing on their chemical and electrochemical synthesis and their resulting structure-property-function relationship. The wide range of bioelectronic applications will also be presented to highlight their importance and potential to expand into new design concepts for high-performance electronic functional materials. The review concludes by addressing the current challenges in utilizing melanin for biodegradable bioelectronics, providing a perspective on future developments.

Liquid-liquid phase transition as a basis for novel materials for skin repair and regeneration

Inorganic materials are of increasing interest not only for bone repair but also for other applications in regenerative medicine. In this study, the combined effects of energy-providing, regeneratively active inorganic polyphosphate (polyP) and also morphogenetically active pearl powder on wound healing were investigated. Aragonite, the mineralic constituent of pearl nacre and thermodynamically unstable form of crystalline calcium carbonate, was found to be converted into a soluble state in the presence of a Ca2+-containing wound exudate, particularly upon addition of sodium polyP (Na-polyP), driven by the transfer of Ca2+ ions from aragonite to polyP, leading to liquid-liquid phase separation to form an aqueous Ca-polyP coacervate. This process is further enhanced in the presence of Ca-polyP nanoparticles (Ca-polyP-NP). Kinetic studies revealed that the coacervation of polyP and nacre aragonite in wound exudate is a very rapid process that results in the formation of a stronger gel with a porous structure compared to polyP alone. Coacervate formation, enabled by phase transition of crystalline aragonite in the presence of Na-polyP/Ca-polyP-NP and wound exudate, could also be demonstrated in a hydroxyethyl cellulose-based hydrogel used for wound treatment. Furthermore, it is shown that Na-polyP/Ca-polyP-NP together with nacre aragonite strongly enhances the proliferation of mesenchymal stem cells and promotes microtube formation in the in vitro angiogenesis assay with HUVEC endothelial cells. The latter effect was confirmed by gene expression studies, applying real-time polymerase chain reaction, using the biomarker genes VEGF (vascular endothelial growth factor) and hypoxia-inducible factor-1 α (HIF-1α). Division of Escherichia coli is suppressed when suspended in a matrix containing Na-polyP/Ca-polyP-NP and aragonite. The potential medical relevance of these findings is supported by an animal study on genetically engineered diabetic mice (db/db), which demonstrated a marked increase in granulation tissue and microvessel formation in regenerating experimental wounds treated with Ca-polyP-NP compared to controls. Co-administration of aragonite significantly accelerated the wound healing-promoting effect of polyP in db/db mice. Based on these results, we propose that the ability of polyP to form a mixed coacervate with aragonite, in addition to its energy (ATP)-generating function, can decisively contribute to the regenerative activity of this polymer in wound repair.

Nanofiber Graft Therapy to Prevent Shoulder Stiffness and Adhesions after Rotator Cuff Tendon Repair: A Comprehensive Review

Stiffness and adhesions following rotator cuff tears (RCTs) are common complications that negatively affect surgical outcomes and impede healing, thereby increasing the risk of morbidity and failure of surgical interventions. Tissue engineering, particularly through the use of nanofiber scaffolds, has emerged as a promising regenerative medicine strategy to address these complications. This review critically assesses the efficacy and limitations of nanofiber-based methods in promoting rotator cuff (RC) regeneration and managing postrepair stiffness and adhesions. It also discusses the need for a multidisciplinary approach to advance this field and highlights important considerations for future clinical trials.

pH-Tolerant Wet Adhesion of Catechol Analogs

The need for improved wet adhesives has driven research on mussel-inspired materials incorporating dihydroxyphenylalanine (DOPA) and related analogs of the parent catechol, but their susceptibility to oxidation limits practical application of these functionalities. Here, we investigate the molecular-level adhesion of the catechol analogs dihydroxybenzamide (DHB) and hydroxypyridinone (HOPO) as a function of pH. We find that the molecular structure of the catechol analogs influences their susceptibility to oxidation in alkaline conditions, with HOPO emerging as a particularly promising candidate for pH-tolerant adhesives for diverse environmental conditions.

Polydopamine-based nano adjuvant as a promising vaccine carrier induces significant immune responses against Acinetobacter baumannii-associated pneumonia

The objective of this study was to assess the effectiveness of polydopamine nanoparticles (PDANPs) as a delivery system for intranasal antigen administration to prevent Acinetobacter baumannii (A. baumannii)-associated pneumonia. In the in vitro phase, the conserved outer membrane protein 22 (Omp22)-encoding gene of A. baumannii was cloned, expressed, and purified, resulting in the production of recombinant Omp22 (rOmp22), which was verified using western blot. PDANPs were synthesized using dopamine monomers and loaded with rOmp22 through physical adsorption. The rOmp22-loaded PDANPs were characterized in terms of size, size distribution, zeta potential, field emission scanning electron microscopy (FESEM), loading capacity, Fourier transform infrared spectroscopy (FTIR), release profile, and cytotoxicity. In the in vivo phase, the adjuvant effect of rOmp22-loaded PDANPs was evaluated in terms of eliciting immune responses, including humoral and cytokine levels (IL-4, IL-17, and IFN-γ), as well as protection challenge. The rOmp22-loaded PDANPs were spherical with a size of 205 nm, a zeta potential of -14 mV, and a loading capacity of approximately 35.7 %. The released rOmp22 from nontoxic rOmp22-loaded PDANPs over 20 days was approximately 41.5 %, with preserved rOmp22 integrity. The IgG2a/IgG1 ratio and IFN-γ levels were significantly higher in immunized mice with rOmp22-loaded-PDANPs than in rOmp22-alum, naive Omp22, and control groups. Furthermore, rOmp22-loaded PDANPs induced effective protection against infection in the experimental challenge and showed more normal structures in the lung histopathology assay. The results of this study suggest the potential of PDANPs as a nano-adjuvant for inducing strong immune responses to combat A. baumannii.

Linear and ring polypeptides complexed with oppositely charged surfactants: the cohesion of the complexes as revealed in atomistic simulations

The use of linear supercharged unfolded polypeptides (SUPs) and oppositely charged surfactants in aqueous solution has demonstrated impressive adhesive properties. These substances possess biocompatibility, biodegradability and other necessary properties for practical application as a biomedical glue in wound repair. The success of these substances, coupled with limited knowledge about such systems, provides hope for enhancing the performance of the final product. One potential approach involves altering the topology of the polypeptide chain. In this article, we conduct a comparative analysis to examine the behavior of the ring and linear chains of a polypeptide in aqueous solution. This analysis utilizes full-atomic computer modeling to monitor the properties of the chains. We investigate the temperature dependence of the shape and size of individual polypeptides in the solution, as well as the formation of complexes via mixing the polypeptide chains with oppositely charged sodium dodecylbenzene sulfonate (SDBS) surfactant molecules in a stoichiometric ratio. Additionally, we explore the cohesive properties of the resulting complex through power experiments involving the extraction of single polypeptide chains out of the SUP-SDBS complexes.

Underwater Adhesives from Redox-Responsive Polyplexes of Thiolated Polyamide Polyelectrolytes

We report the fabrication of optically clear underwater adhesives using polyplexes of oppositely charged partially-thiolated polyamide polyelectrolytes (TPEs). The thiol content of the constituent PEs was varied to assess its influence on the adhesive properties of the resulting glues. These catechol-free, redox-responsive TPE-adhesives were formulated in aquo and exhibited high optical transparency and strong adhesion even on submerged or moist surfaces of diverse polar substrates such as glass, aluminium, wood, and bone pieces. The adhesives could be cured under water through oxidative disulphide crosslinking of the constituent TPEs. The polyamide backbone provided multi-site H-bonding interactions with the substrates while the disulphide crosslinking provided the cohesive strength to the glue. Strong adhesion of mammalian bones (load bearing capacity upto 7 kg/cm2 ) was achieved using the adhesive containing 30 mol % thiol residues. Higher pH and use of oxidants such as povidone-iodine solution enhanced the curing rate of the adhesives, and so did the use of Tris buffer instead of Phosphate buffer. The porous architecture of the adhesive and its progressive degradation in aqueous medium over the course of three weeks bode well for diverse biomedical applications where temporary adhesion of tissues is required.

Facile preparation of smart nanocomposite adhesive with superhydrophobicity and photoluminescence

Smart photoluminescent nanocomposite adhesive was developed toward simple commercial manufacturing of long-persistent luminescent and hydrophobic applications. The prepared photoluminescent glue was able to continue emitting light after turning the illumination source off even after being in the dark for up to 1.5 h. Lanthanide-doped strontium aluminum oxide (LSAO) nanoparticles (NPs) dispersed in liquid silicone rubber (SR) was prepared to function as nanocomposite glue for various surfaces. Using nano-scaled particles, LSAO was uniformly disseminated without agglomeration in the silicone rubber matrix, enabling the produced nanocomposite glue to transmit light. For the applied glues, there is an excitation peak determined at 365 nm, and an emission peak determined at 518 nm. Depending on the LSAO ratio, the photoluminescence spectra displayed either afterglow phosphorescence or fluorescence. Photochromism was monitored from transparent to greenish under UV irradiation and greenish-yellow in darkness. The glued samples benefit from enhanced superhydrophobicity and scratch resistance due to LSAO NPs embedded in the silicone rubber matrix. The glueed LSAO@SR nanocomposite showed high durability and resistance to light damages. This research established the feasibility of mass-producing smart glue for various uses such as building safety directed signs and smart windows.

Sea squirt-inspired bio-derived tissue sealants

Sea squirts' or tunicates' bodies are composed of cellulose nanofibers and gallol- functionalized proteins. These sea creatures are known to heal their injuries under seawater by forming crosslinks between gallols and functional groups from other proteins in their bodies. Inspired by their wound healing mechanism, herein, we have developed a tissue sealant using zein (a plant-based protein) and tannic acid (gallol-containing polyphenol). Except for fibrin- based sealants, most commercial surgical adhesives, and sealants available today are derived from petroleum products that compromise their biodegradability. They often have complicated and multi-step synthesis processes that ultimately affect their affordability. To overcome this challenge, we ensured that these sea squirt-inspired tissue sealants are bio-based, easily synthesized, and low-cost. The sealants were studied on their own and with a food-grade enzyme transglutaminase. The adhesion performances of the sealants were found to be higher than physiological pressures in seven out of nine different tissue substrates studied here. Their performance was also better than or on par with the FDA-approved fibrin sealant Tisseel. Ex vivo models demonstrate instant sealing of leaking wounds in less than a minute. The sealants were not only cytocompatible but also showed complete wound healing on par with sutures and Tisseel when applied in vivo on skin incisions in rats. Overall, these sea squirt-inspired bio-based sealants show great potential to replace currently available wound closure methods.

Increase in Charge and Density Improves the Strength and Toughness of Mussel Foot Protein 5 Inspired Protein Materials

Mussel foot protein 5 (fp5) found in the adhesive byssal plaque of Mediterranean mussel Mytilus galloprovincialis exhibits exceptional underwater adhesion to diverse surfaces to the extent that adhesion strength typically exceeds the cohesive strength of the plaque. While sequence effects such as presence of charged residues, metal ion coordination, and high catechol content have been identified to govern fp5's interaction with surfaces, molecular contributors to its cohesive strength remain to be fully understood. Addressing this issue is critical for designing mussel-inspired sequences for new adhesives and biomaterials enabled by synthetic biology. Here we carry out all-atom molecular dynamics simulations on hydrated model fp5 biopolymer melts to understand how sequence features such as tyrosine and charge content affect packing density and inter-residue and ionic interaction strengths and consequently influence the cohesive strength and toughness. Systematic serine (S) substitutions for lysine (K), arginine (R) and tyrosine (Y) residues reveal that Y to S substitution surprisingly results in improvement of cohesive strength due to densification of the material by removal of steric hindrances, whereas the removal of charge in K and R to S substitutions has a detrimental impact on strength and toughness as it reduces cohesive interactions facilitated by electrostatic interactions. Additionally, melts formed from split fp5 sequences with only C or N terminal halves show distinct mechanical responses that further illustrate the role of charge. Our findings provide new insights for designing materials that could potentially surpass the performance of existing biomolecular and bioinspired adhesives, specifically by tailoring sequences for balancing charge and excluded volume effects.

Modified Prebiotic-Based "Shield" Armed Probiotics with Enhanced Resistance of Gastrointestinal Stresses and Prolonged Intestinal Retention for Synergistic Alleviation of Colitis

Oral administration of probiotics is a promising method to alleviate inflammatory bowel diseases (IBDs). However, gastrointestinal environmental sensitivity and inferior intestinal colonization of probiotics hinder the alleviation effect. Here, we developed a simple yet effective modified prebiotic-based "shield" (Fe-TA@mGN) composed of an Fe3+-tannic acid cross-linking network and carboxymethylated β-glucan for arming Escherichia coli Nissle 1917 (EcN@Fe-TA@mGN). The Fe-TA@mGN "shield" not only acted as a dynamic barrier to enhance the gastrointestinal stress resistance ability of EcN but also aided the intestinal colonization of EcN as well as synergized with EcN for the alleviation of dextran sulfate sodium (DSS) induced colitis. More specifically, with the protection of the Fe-TA@mGN "shield", the survival rate of armed EcN could be up to ∼1720 times higher than that of bare EcN after exposure to simulated gastric fluid. Excitingly, the intestinal retention rate of EcN@Fe-TA@mGN was as high as 47.54 ± 6.06% at 16 h post-administration, while almost all bare EcNs were excreted out at 8 h post-administration. With all of the aforementioned attributes, EcN@Fe-TA@mGN efficiently alleviated colitis, verified by the repair of the intestinal barrier and the attenuation of inflammation. Moreover, for EcN@Fe-TA@mGN, mGN synergized with EcN to positively modulate gut microbiota and promote the production of short-chain fatty acids (SCFAs, especially for butyric acid, a primary source for maintaining intestinal health), both of which would further advance the alleviation of colitis. We envision that the strategy developed here will inspire the exploitation of various prebiotics to arm probiotics for the effective alleviation of IBD.

In vivo bioprinting: Broadening the therapeutic horizon for tissue injuries

Tissue injury is a collective term for various disorders associated with organs and tissues induced by extrinsic or intrinsic factors, which significantly concerns human health. In vivo bioprinting, an emerging tissue engineering approach, allows for the direct deposition of bioink into the defect sites inside the patient's body, effectively addressing the challenges associated with the fabrication and implantation of irregularly shaped scaffolds and enabling the rapid on-site management of tissue injuries. This strategy complements operative therapy as well as pharmacotherapy, and broadens the therapeutic horizon for tissue injuries. The implementation of in vivo bioprinting requires targeted investigations in printing modalities, bioinks, and devices to accommodate the unique intracorporal microenvironment, as well as effective integrations with intraoperative procedures to facilitate its clinical application. In this review, we summarize the developments of in vivo bioprinting from three perspectives: modalities and bioinks, devices, and clinical integrations, and further discuss the current challenges and potential improvements in the future.

Reactive oxygen species-responsive thymine-conjugated chitosan: Synthesis and evaluation as cryogel

Chitosan (CS) is a biodegradable, biocompatible cationic polysaccharide based natural polymer with antibacterial and anti-inflammatory properties. Hydrogels made from CS have been found their applications in wound healing, tissue regeneration and drug delivery. Although, mucoadhesive properties resulted from the polycationic nature of CS, in hydrogel form amines are engaged in interactions with water leading to decrease in mucoadhesive properties. In case of injury, presence of elevated level of reactive oxygen species (ROS) has inspired many drug delivery platform to conjugate ROS responsive linkers for on demand drug delivery. In this report we have conjugated a reactive oxygen species (ROS) responsive thioketal (TK) linker and nucleobase thymine (Thy) with CS. Cryogel from this doubly functionalized polymer CS-Thy-TK was prepared through crosslinking with sodium alginate. Inosine was loaded on the scaffold and studied for its release under oxidative condition. We anticipated that the presence of thymine shall retain the mucoadhesive nature of the CS-Thy-TK polymer in hydrogel form and when placed at the site of injury, due to the presence of excessive ROS at inflammatory condition, loaded drug shall release due to degradation of the linker. Porous cryogel scaffold was prepared via chemical crosslinking of amine functional group of chitosan with carboxylic acid containing polysaccharide sodium alginate. The cryogel was evaluated for porosity (FE-SEM), rheology, swelling, degradation, mucoadhesive properties and biocompatibility. Resulted scaffold was found to be porous with average pore size of 107 ± 23 μm, biocompatible, hemocompatible and possesses improved mucoadhesive property (mucin binding efficiency of 19.54 %) which was found to be 4 times better as compared to chitosan (4.53 %). The cumulative drug release found to be better in the presence of H₂O₂ (~90 %) when compared to that of PBS alone (~60-70 %)_. Therefore, the modified CS-Thy-TK polymer may hold potential as interesting scaffold in case of conditions associated with elevated ROS level such as injury and tumor.

A propitious role of marine sourced polysaccharides: Drug delivery and biomedical applications

Numerous compounds, with extensive applications in biomedical and biotechnological fields, are present in the oceans, which serve as a prime renewable source of natural substances, further promoting the development of novel medical systems and devices. Polysaccharides are present in the marine ecosystem in abundance, promoting minimal extraction costs, in addition to their solubility in extraction media, and an aqueous solvent, along with their interactions with biological compounds. Certain algae-derived polysaccharides include fucoidan, alginate, and carrageenan, while animal-derived polysaccharides comprise hyaluronan, chitosan and many others. Furthermore, these compounds can be modified to facilitate their processing into multiple shapes and sizes, as well as exhibit response dependence to external conditions like temperature and pH. All these properties have promoted the use of these biomaterials as raw materials for the development of drug delivery carrier systems (hydrogels, particles, capsules). The present review enlightens marine polysaccharides providing its sources, structures, biological properties, and its biomedical applications. In addition to this, their role as nanomaterials is also portrayed by the authors, along with the methods employed to develop them and associated biological and physicochemical properties designed to develop suitable drug delivery systems.

Rheological Properties of Ionically Crosslinked Viscoelastic 2D Films vs. Corresponding 3D Bulk Hydrogels

Ionically crosslinked hydrogels containing metal coordination motifs have piqued the interest of researchers in recent decades due to their self-healing and adhesive properties. In particular, catechol-functionalized bulk hydrogels have received a lot of attention because of their bioinspired nature. By contrast, very little is known about thin viscoelastic membranes made using similar chelator-ion pair motifs. This shortcoming is surprising because the unique interfacial properties of these membranes, namely, their self-healing and adhesion, would be ideal for capsule shells, adhesives, or for drug delivery purposes. We recently demonstrated the feasibility to fabricate 10 nm thick viscoelastic membranes from catechol-functionalized surfactants that are ionically crosslinked at the liquid/liquid interface. However, it is unclear if the vast know-how existing on the influence of the chelator-ion pair on the mechanical properties of ionically crosslinked three-dimensional (3D) hydrogels can be translated to two-dimensional (2D) systems. To address this question, we compare the dynamic mechanical properties of ionically crosslinked pyrogallol functionalized hydrogels with those of viscoelastic membranes that are crosslinked using the same chelator-ion pairs. We demonstrate that the storage and loss moduli of viscoelastic membranes follow a trend similar to that of the hydrogels, with the membrane becoming stronger as the ion-chelator affinity increases. Yet, membranes relax significantly faster than bulk equivalents. These insights enable the targeted design of viscoelastic, adhesive, self-healing membranes possessing tunable mechanical properties. Such capsules can potentially be used, for example, in cosmetics, as granular inks, or with additional work that includes replacing the fluorinated block by a hydrocarbon-based one in drug delivery and food applications.

A self-healing hydrogel and injectable cryogel of gelatin methacryloyl-polyurethane double network for 3D printing

Three-dimensional (3D) printing of soft biomaterials facilitates the progress of personalized medicine. The development for different forms of 3D-printable biomaterials can promotes the potential manufacturing for artificial organs and provides biomaterials with the required properties. In this study, gelatin methacryloyl (GelMA) and dialdehyde-functionalized polyurethane (DFPU) were combined to create a double crosslinking system and develop 3D-printable GelMA-PU biodegradable hydrogel and cryogel. The GelMA-PU system demonstrates a combination of self-healing ability and 3D printability and provides two distinct forms of 3D-printable biomaterials with smart functions, high printing resolution, and biocompatibility. The hydrogel was printed into individual modules through an 80 µm or larger nozzle and further assembled into complex structures through adhesive and self-healing abilities, which could be stabilized by secondary photocrosslinking. The 3D-printed hydrogel was adhesive, light transmittable, and could embed a light emitting diode (LED). Furthermore, the hydrogel laden with human mesenchymal stem cells (hMSCs) was successfully printed and showed cell proliferation. Meanwhile, 3D-printed cryogel was achieved by printing on a subzero temperature platform through a 210 µm nozzle. After secondary photocrosslinking and drying, the cryogel was deliverable through a 16-gauge (1194 µm) syringe needle and can promote the proliferation of hMSCs. The GelMA-PU system extends the ink pool for 3D printing of biomaterials and has potential applications in tissue engineering scaffolds, minimally invasive surgery devices, and electronic wound dressings. STATEMENT OF SIGNIFICANCE: The 3D-printable biomaterials developed in this work are GelMA-based ink with smart funcitons and have potentials for various customized medical applications. The synthesized GelMA-polyurethane double network hydrogel can be 3D-printed into individual modules (e.g., 11 × 11 × 5 mm³) through an 80 μm or larger size nozzle, which are then assembled into a taller structure over five times of the initial height by self-healing and secondary photocrosslinking. The hydrogel is adhesive, light transmittable, and biocompatible that can either carry human mesenchymal stem cells (hMSCs) as bioink or embed a red light LED (620 nm) with potential applications in electronic skin dressing. Meanwhile, the 3D-printed highly compressible cryogel (e.g., 6 × 6 × 1 mm³) is deliverable by a 16-gauge (1194 μm) syringe needle and supports the proliferation of hMSCs also.

Constructing a Hierarchical Hydrophilic Crosslink Network on the Surface of a Polyvinylidene Fluoride Membrane for Efficient Oil/Water Emulsion Separation

Oil/water mixtures from industrial and domestic wastewater adversely affect the environment and human beings. In this context, the development of a facile and improved separation method is crucial. Herein, dopamine was used as a bioadhesive to bind tea polyphenol (TP) onto the surface of a polyvinylidene fluoride (PVDF) membrane to form the first hydrophilic polymer network. Sodium periodate (NaIO₄) is considered an oxidising agent for triggering self-polymerisation and can be used to introduce hydrophilic groups via surface manipulation to form the second hydrophilic network. In contrast to the individual polydopamine (PDA) and TP/NaIO₄ composite coatings for a hydrophobic PVDF microfiltration membrane, a combination of PDA, TP, and NaIO₄ has achieved the most facile treatment process for transforming the hydrophobic membrane into the hydrophilic state. The hierarchical superhydrophilic network structure with a simultaneous underwater superoleophobic membrane exhibited excellent performance in separating various oil-in-water emulsions, with a high water flux (1530 L.m^-2 h^-1.bar) and improved rejection (98%). The water contact angle of the modified membrane was 0° in 1 s. Moreover, the steady polyphenol coating was applied onto the surface, which endowed the membrane with an adequate antifouling and recovery capability and a robust durability against immersion in an acid, alkali, or salt solution. This facile scale-up method depends on in situ plant-inspired chemistry and has remarkable potential for practical applications.

Advanced Bionic Attachment Equipment Inspired by the Attachment Performance of Aquatic Organisms: A Review

In nature, aquatic organisms have evolved various attachment systems, and their attachment ability has become a specific and mysterious survival skill for them. Therefore, it is significant to study and use their unique attachment surfaces and outstanding attachment characteristics for reference and develop new attachment equipment with excellent performance. Based on this, in this review, the unique non-smooth surface morphologies of their suction cups are classified and the key roles of these special surface morphologies in the attachment process are introduced in detail. The recent research on the attachment capacity of aquatic suction cups and other related attachment studies are described. Emphatically, the research progress of advanced bionic attachment equipment and technology in recent years, including attachment robots, flexible grasping manipulators, suction cup accessories, micro-suction cup patches, etc., is summarized. Finally, the existing problems and challenges in the field of biomimetic attachment are analyzed, and the focus and direction of biomimetic attachment research in the future are pointed out.

Mussel-Based Biomimetic Strategies in Musculoskeletal Disorder Treatment: From Synthesis Principles to Diverse Applications

Musculoskeletal disorders are the second leading cause of disability worldwide, posing a huge global burden to the public sanitation system. Currently, tissue engineering-based approaches act as effective strategies, which are, however, challenging in limited application scenarios. Mussel-based biomimetic materials, exhibit numerous unique properties such as intense adhesion, biocompatibility, moisture resistance, and injectability, to name only a few, and have attracted extensive research interest. In particular, featuring state-of-the-art properties, mussel-inspired biomaterials have been widely explored in innumerable musculoskeletal disorder treatments including osteochondral defects, osteosarcoma, osteoarthritis, ligament rupture, and osteoporosis. Nevertheless, a comprehensive and timely discussion of their applications in musculoskeletal disorders is insufficient. In this review, we emphasize on (1) the main categories and characteristics of mussel foot proteins and their fundamental mechanisms for the spectacular adhesion in mussels; (2) the diverse synthetic methods and modification of various polymers; and (3) the emerging applications of mussel-biomimetic materials, the future perspectives, and challenges, especially in the area of musculoskeletal disorder. We envision that this review will provide a unique and insightful perspective to improve the development of a new generation of mussel biomimetic strategies.

Forced Gradient Copolymer for Rational Design of Mussel-Inspired Adhesives and Dispersants

In recent years, there has been considerable research into functional materials inspired by living things. Much attention has been paid to the development of adhesive materials that mimic the adhesive proteins secreted by a mussel's foot. These mussel-inspired materials have superior adhesiveness to various adherents owing to the non-covalent interactions of their polyphenolic moieties, e.g., hydrogen bonding, electrostatic interactions, and even hydrophobic interactions. Various factors significantly affect the adhesiveness of mussel-inspired polymers, such as the molecular weight, cross-linking density, and composition ratio of the components, as well as the chemical structure of the polyphenolic adhesive moieties, such as l-3,4-dihydroxyphenylalanine (l-Dopa). However, the contributions of the position and distribution of the adhesive moiety in mussel-inspired polymers are often underestimated. In the present study, we prepared a series of mussel-inspired alkyl methacrylate copolymers by controlling the position and distribution of the adhesive moiety, which are known as "forced gradient copolymers". We used a newly designed gallic-acid-bearing methacrylate (GMA) as the polyphenolic adhesive moiety and copolymerized it with 2-ethylhexyl methacrylate (EHMA). The resulting forced gradient adhesive copolymer of GMA and EHMA (poly(GMA-co-EHMA), Poly1) was subjected to adhesion and dispersion tests with an aluminum substrate and a BaTiO₃ nanoparticle in organic solvents, respectively. In particular, this study aims to clarify how the monomer position and distribution of the adhesive moiety in the mussel-inspired polymer affect its adhesion and dispersion behavior on a flat metal oxide surface and spherical inorganic oxide surfaces of several tens of nanometers in diameter, respectively. Here, forced gradient copolymer Poly1 consisted of a homopolymer moiety of EHMA (Poly3) and a random copolymer moiety of EHMA and GMA (Poly4). The composition ratio of GMA and the molecular weight were kept constant among the Poly1 series. Simultaneous control of the molecular lengths of Poly3 and Poly4 allowed us to discuss the effects on the distribution of GMA in Poly1. Poly1 exhibited apparent distribution dependency with regard to the adhesiveness and the dispersibility of BaTiO₃. Poly1 showed the highest adhesion strength when the composition ratio of GMA was approximately 9 mol% in the portion of the Poly4 segment. In contrast, the block copolymer consisting of the Poly3 segment and Poly4 segment with only adhesive moiety 1 showed the lowest viscosity for dispersion of BaTiO₃ nanoparticles. These results indicate that copolymers with mussel-inspired adhesive motifs require the proper design of the monomer position and distribution in Poly1 according to the shape and characteristics of the adherend to maximize their functionality. This research will facilitate the rational design of bio-inspired adhesive materials derived from plants that outperform natural materials, and it will eventually contribute to a sustainable circular economy.

Rheology and Gelation of Hyaluronic Acid/Chitosan Coacervates

Hyaluronic acid (HA) and chitosan (CHI) are biopolyelectrolytes which are interesting for both the medical and polymer physics communities due to their biocompatibility and semi-flexibility, respectively. In this work, we demonstrate by rheology experiments that the linear viscoelasticity of HA/CHI coacervates depends strongly on the molecular weight of the polymers. Moduli for coacervates were found significantly higher than those of individual HA and CHI physical gels. A remarkable 1.5-fold increase in moduli was noted when catechol-conjugated HA and CHI were used instead. This was attributed to the conversion of coacervates to chemical gels by oxidation of 3,4-dihydroxyphenylalanine (DOPA) groups in HA and CHI to di-DOPA crosslinks. These rheological results put HA/CHI coacervates in the category of strong candidates as injectable tissue scaffolds or medical adhesives.

Engineering Bio-Adhesives Based on Protein-Polysaccharide Phase Separation

Glue-type bio-adhesives are in high demand for many applications, including hemostasis, wound closure, and integration of bioelectronic devices, due to their injectable ability and in situ adhesion. However, most glue-type bio-adhesives cannot be used for short-term tissue adhesion due to their weak instant cohesion. Here, we show a novel glue-type bio-adhesive based on the phase separation of proteins and polysaccharides by functionalizing polysaccharides with dopa. The bio-adhesive exhibits increased adhesion performance and enhanced phase separation behaviors. Because of the cohesion from phase separation and adhesion from dopa, the bio-adhesive shows excellent instant and long-term adhesion performance for both organic and inorganic substrates. The long-term adhesion strength of the bio-glue on wet tissues reached 1.48 MPa (shear strength), while the interfacial toughness reached ~880 J m-2. Due to the unique phase separation behaviors, the bio-glue can even work normally in aqueous environments. At last, the feasibility of this glue-type bio-adhesive in the adhesion of various visceral tissues in vitro was demonstrated to have excellent biocompatibility. Given the convenience of application, biocompatibility, and robust bio-adhesion, we anticipate the bio-glue may find broad biomedical and clinical applications.

Tough Wet Adhesion of Hydrogen-Bond-Based Hydrogel with On-Demand Debonding and Efficient Hemostasis

Hydrogels have been widely used in wet tissues. However, the insufficient adhesion of hydrogels for wound hemostasis remains a grand challenge. Herein, a facile yet effective strategy is developed to fabricate tough wet adhesion of hydrogen-bond-based hydrogel (PAAcVI hydrogel) using copolymerization of acrylic acid and 1-vinylimidazole in dimethyl sulfoxide followed by solvent exchange with water. The PAAcVI hydrogel shows equally robust adhesion (>400 J m^-2) to both wet and dry tissues. Moreover, the PAAcVI hydrogel also exhibits strong long-term stable adhesion underwater and in various wet environments. Meanwhile, the adhesion of PAAcVI hydrogel can be adjusted through Zn²⁺-ion-mediated on-demand debonding, which makes it easy to peel off from the tissue reducing pain during dressing removal and avoiding secondary injury. The PAAcVI hydrogel displays efficient hemostasis in the mice-tail docking model and mice-liver bleeding model. This hydrogen-bond-based hydrogel shows tough wet adhesion, and its adhesion is controllable, demonstrating its promising application in moisture-resistant adhesives, medical adhesives, and hemostatic materials.

Development of a Hemostatic Urinary Catheter for Transurethral Prostatic Surgical Applications

OBJECTIVE

To investigate a novel transurethral hemostatic catheter device with an integrated chitosan endoluminal hemostatic dressing (CEHD). Development and implementation of this technology may help address bleeding following surgery such as transurethral resection of prostate (TURP). Bleeding remains the most common complication following TURP, leading to increased morbidity and hospitalization.

METHODS

Investigation of hemostasis, delivery, safety and efficacy of the CEHD device is conducted using Female Yorkshire swine (N = 23). Hemostatic efficacy of the CEHD (N = 12) is investigated against a control of gauze (N = 12) in a splenic injury model (3 swine). The delivery, safety, and efficacy of the CEHD device (N = 10) are investigated against Foley-catheter control (N = 10) for 7 days using a swine bladder-neck-injury model.

RESULTS

In the splenic injury study, 9/12 CEHD dressings successfully achieved hemostasis within 150 seconds (mean 83 seconds) vs success of 6/12 (mean 150 seconds) for gauze (P = .04). In the 7-day study, the CEHD was successfully deployed in 10/10 animals and all dressings were tolerated without histologic or clinical adverse effect. Hemostasis of the CEHD device was found to be noninferior to control catheters. Noninferiority is attributed to low bleeding rates in the swine bladder neck injury model.

CONCLUSION

This investigation successfully demonstrated the feasibility of transurethral deployment of the CEHD in vivo. Routine use of safe and slowly dissolvable CEHDs could reduce the rate of complications and hospitalizations associated with bleeding and blood loss in TURP procedures. Further investigation is warranted.

Biodegradable polyaspartamide-g-C18 /DOPA/GLY-NEO nano-adhesives for wound closure/healing with antimicrobial activity

This study was focused on the development of biodegradable nano-adhesives with efficient sealing and antibiotic effects for wound healing. Biodegradable polyaspartamide (PASPAM) was grafted with several functional groups to implement diverse roles-octadecylamine (C₁₈ ) for nano-aggregate formation, dopamine (DOPA) for adhesive function, neomycin (NEO) for inhibition of bacterial infection. Specifically, NEO was conjugated to PASPAM with a pH-sensitive glycine (GLY) linker for targeted delivery on the acidic wound site. About 60% of the drug was ramteleased at pH 6.0, while about 22% was released at pH 7.4, showing the faster drug release pattern of nano-adhesives in the acidic environment. The C₁₈ /DOPA/GLY-NEO-g-PASPAM nano-adhesives showed the bacterial viability higher than 70% at pH 7.4, but about 40% at pH 6.0. The wound breaking strength of the polymer-treated skin was much higher than that of the bare skin. According to the in vivo wound healing test using a mouse model, C₁₈ /DOPA/GLY-NEO-g-PASPAM nano-adhesives showed much faster healing performance than sutures. From those results, C₁₈ /DOPA/GLY-NEO-g-PASPAM nano-adhesives are expected to be utilized as effective adhesives that promote the wound healing with inhibition of bacterial infection.

Copolymerization Kinetics of Dopamine Methacrylamide during PNIPAM Microgel Synthesis for Increased Adhesive Properties

Combining stimuli-responsive properties of gels with adhesive properties of mussels is highly interesting for a large field of applications as, e.g., in life science. Therefore, the present paper focuses on the copolymerization of poly(N-isopropylacrylamide) (PNIPAM) microgels with dopamine methacrylamide (DMA). A detailed understanding of reaction kinetics is crucial to figure out an optimized synthesis strategy for tailoring microgels with adhesive properties. The present study addresses the influence of relevant synthesis parameters as the injection time of DMA during the microgel synthesis and the overall reaction time of the microgel. Reaction kinetics were studied by mass spectrometry of time samples taken during the microgel synthesis. This allowed us to determine the monomer consumption of NIPAM, the cross-linker N,N'-methylenebisacrylamide (BIS), and DMA. A second-order reaction kinetics was found for DMA incorporation. The amount of DMA incorporated in the resulting microgel was successfully determined by a combination of UV-vis and NMR spectroscopy to level off limitations of both methods. The dependence of the hydrodynamic radius on temperature was determined by DLS measurements for the microgels. While an early injection of DMA stops the PNIPAM polymerization due to scavenging, it greatly enhances the reaction speed of DMA. The faster reaction of DMA and the incomplete NIPAM and BIS conversion also compensate for shorter reaction times with respect to the incorporated amount of DMA. On the contrary, a later injection of DMA leads to a full NIPAM monomer and BIS cross-linker consumption. An overall reaction time of 60 min ensures the DMA incorporation. Longer reaction times lead to clumping. First adhesion tests show an increased adhesion of P(NIPAM-co-DMA) microgels compared to pure PNIPAM microgels, when mechanical stress is applied.

A Bi-Layer Hydrogel Cardiac Patch Made of Recombinant Functional Proteins

The development of minimally invasive cardiac patches, either as hemostatic dressing or treating myocardial infarction, is of clinical significance but remains a major challenge. Designing such patches often requires simultaneous consideration of several material attributes, including bioabsorption, non-toxicity, matching the mechanic properties of heart tissues, and working efficiently in wet and dynamic environments. Using genetically engineered multi-domain proteins, a printed bi-layer proteinaceous hydrogel patch for heart failure treatments is reported. The intrinsic self-healing nature of hydrogel materials physically enables seamless interfacial integration of two disparate hydrogel layers and functionally endows the cardiac patches with the combinatorial advantages of each layer. Leveraging the biocompatibility, structural stability, and tunable drug release properties of the bi-layer hydrogel, promising effects of hemostasis, fibrosis reduction, and heart function recovery on mice is demonstrated with two myocardium damage models. Moreover, this proteinaceous patch is proved biodegradable in vivo without any additive inflammations. In conclusion, this work introduces a promising new type of minimally invasive patch based on genetically modified double-layer protein gel for treating heart-related injuries or diseases.

Polydopamine nanoparticles and hyaluronic acid hydrogels for mussel-inspired tissue adhesive nanocomposites

Bioadhesives are intended to facilitate the fast and efficient reconnection of tissues to restore their functionality after surgery or injury. The use of mussel-inspired hydrogel systems containing pendant catechol moieties is promising for tissue attachment under wet conditions. However, the adhesion strength is not yet ideal. One way to overcome these limitations is to add polymeric nanoparticles to create nanocomposites with improved adhesion characteristics. To further enhance adhesiveness, polydopamine nanoparticles with controlled size prepared using an optimized process, were combined with a mussel-inspired hyaluronic acid (HA) hydrogel to form a nanocomposite. The effects of sizes and concentrations of polydopamine nanoparticles on the adhesive profiles of mussel-inspired HA hydrogels were investigated. Results show that the inclusion of polydopamine nanoparticles in nanocomposites increased adhesion strength, as compared to the addition of poly (lactic-co-glycolic acid) (PLGA), and PLGA-(N-hydroxysuccinimide) (PLGA-NHS) nanoparticles. A nanocomposite with demonstrated cytocompatibility and an optimal lap shear strength (47 ± 3 kPa) was achieved by combining polydopamine nanoparticles of 200 nm (12.5% w/v) with a HA hydrogel (40% w/v). This nanocomposite adhesive shows its potential as a tissue glue for biomedical applications.

Soft Devices for High-Resolution Neuro-Stimulation: The Interplay Between Low-Rigidity and Resolution

The field of neurostimulation has evolved over the last few decades from a crude, low-resolution approach to a highly sophisticated methodology entailing the use of state-of-the-art technologies. Neurostimulation has been tested for a growing number of neurological applications, demonstrating great promise and attracting growing attention in both academia and industry. Despite tremendous progress, long-term stability of the implants, their large dimensions, their rigidity and the methods of their introduction and anchoring to sensitive neural tissue remain challenging. The purpose of this review is to provide a concise introduction to the field of high-resolution neurostimulation from a technological perspective and to focus on opportunities stemming from developments in materials sciences and engineering to reduce device rigidity while optimizing electrode small dimensions. We discuss how these factors may contribute to smaller, lighter, softer and higher electrode density devices.

Hydrogel tapes for fault-tolerant strong wet adhesion

Fast and strong bio-adhesives are in high demand for many biomedical applications, including closing wounds in surgeries, fixing implantable devices, and haemostasis. However, most strong bio-adhesives rely on the instant formation of irreversible covalent crosslinks to provide strong surface binding. Repositioning misplaced adhesives during surgical operations may cause severe secondary damage to tissues. Here, we report hydrogel tapes that can form strong physical interactions with tissues in seconds and gradually form covalent bonds in hours. This timescale-dependent adhesion mechanism allows instant and robust wet adhesion to be combined with fault-tolerant convenient surgical operations. Specifically, inspired by the catechol chemistry discovered in mussel foot proteins, we develop an electrical oxidation approach to controllably oxidize catechol to catecholquinone, which reacts slowly with amino groups on the tissue surface. We demonstrate that the tapes show fast and reversible adhesion at the initial stage and ultrastrong adhesion after the formation of covalent linkages over hours for various tissues and electronic devices. Given that the hydrogel tapes are biocompatible, easy to use, and robust for bio-adhesion, we anticipate that they may find broad biomedical and clinical applications.

Design principles for creating synthetic underwater adhesives

Water and adhesives have a conflicting relationship as demonstrated by the failure of most man-made adhesives in underwater environments. However, living creatures routinely adhere to substrates underwater. For example, sandcastle worms create protective reefs underwater by secreting a cocktail of protein glue that binds mineral particles together, and mussels attach themselves to rocks near tide-swept sea shores using byssal threads formed from their extracellular secretions. Over the past few decades, the physicochemical examination of biological underwater adhesives has begun to decipher the mysteries behind underwater adhesion. These naturally occurring adhesives have inspired the creation of several synthetic materials that can stick underwater - a task that was once thought to be "impossible". This review provides a comprehensive overview of the progress in the science of underwater adhesion over the past few decades. In this review, we introduce the basic thermodynamics processes and kinetic parameters involved in adhesion. Second, we describe the challenges brought by water when adhering underwater. Third, we explore the adhesive mechanisms showcased by mussels and sandcastle worms to overcome the challenges brought by water. We then present a detailed review of synthetic underwater adhesives that have been reported to date. Finally, we discuss some potential applications of underwater adhesives and the current challenges in the field by using a tandem analysis of the reported chemical structures and their adhesive strength. This review is aimed to inspire and facilitate the design of novel synthetic underwater adhesives, that will, in turn expand our understanding of the physical and chemical parameters that influence underwater adhesion.

Effect of Conductivity on In Situ Deactivation of Catechol-Boronate Complexation-Based Reversible Smart Adhesive

To reduce the need for elevated electrical potential to deactivate catechol-based smart adhesive and preserve its reversibility, conductive 1-pyrenemethyl methacrylate (PyMA) was incorporated into a catechol and phenylboronic acid-containing adhesive coating immobilized on aluminum (Al) discs. Electrochemical impedance spectroscopy (EIS) indicated that incorporation of 26 mol % of PyMA reduced ionic resistance (R_s) and charge-transfer resistance (R_c) of the coating from over 22 Ω/mm² to 5.9 and 1.2 Ω/mm², respectively. A custom-built Johnson-Kendall-Roberts (JKR) contact mechanics test setup was used to evaluate the adhesive property of the coating with in situ applied electricity using a titanium (Ti) sphere both as a test substrate as well as the cathode for application of electricity and the Al disc as the anode. The adhesive coating demonstrated over 95% reduction in the adhesive property when electricity (1-2 V) was applied while the adhesive was in direct contact with the Ti surface. The addition of PyMA enables the deactivation of the adhesive using a voltage as low as 1 V. Both cyclic voltammetry (CV) and attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectra confirmed the formation of catechol-boronate complexation through electrochemical stimulation. Breaking the complex with an acidic buffer (pH 3) recovered the catechol for strong wet adhesion and the coating could be repeatedly deactivated and reactivated using low electrical potential for up to five cycles. Incorporation of both conductive PyMA and boronic acid as the temporary protecting group was required to achieve rapidly switchable adhesive that could be deactivated with low applied voltage.

Effect of Substituents in Mussel-inspired Surface Primers on their Oxidation and Priming Efficiency

Marine mussels contain an abundant catechol moiety, 3,4-dihydroxyphenylalanine (DOPA), in their interfacial foot proteins. DOPA contributes to both surface adhesion and bridging between the surface and overhead proteins (surface priming) by taking advantage of the unique redox properties of catechol. Inspired by the mussel surface priming mechanism, herein we synthesized a series of DOPA-mimetic analogs - a bifunctional group molecule, consisting of a catechol group and an acrylic group at the opposite ends. The surface primers with differently substituted (-COOH, -CH3 ) alkyl chains in the middle spacer were synthesized. Time-dependent oxidation and redox potentials of the surface primers were studied in an oxidizing environment to gain a better understanding of the mussel's redox chemistry. The thickness and degree of priming of the surface primers on silicon-based substrates were analyzed by ellipsometry and UV/Vis absorption spectroscopy. The post-reactivity of the acrylic groups of the primed layer was first visualized through a reaction with an acrylic group-reactive dye.

Control of Nanoscale In Situ Protein Unfolding Defines Network Architecture and Mechanics of Protein Hydrogels

Hierarchical assemblies of proteins exhibit a wide-range of material properties that are exploited both in nature and by artificially by humankind. However, little is understood about the importance of protein unfolding on the network assembly, severely limiting opportunities to utilize this nanoscale transition in the development of biomimetic and bioinspired materials. Here we control the force lability of a single protein building block, bovine serum albumin (BSA), and demonstrate that protein unfolding plays a critical role in defining the architecture and mechanics of a photochemically cross-linked native protein network. The internal nanoscale structure of BSA contains "molecular reinforcement" in the form of 17 covalent disulphide "nanostaples", preventing force-induced unfolding. Upon addition of reducing agents, these nanostaples are broken rendering the protein force labile. Employing a combination of circular dichroism (CD) spectroscopy, small-angle scattering (SAS), rheology, and modeling, we show that stapled protein forms reasonably homogeneous networks of cross-linked fractal-like clusters connected by an intercluster region of folded protein. Conversely, in situ protein unfolding results in more heterogeneous networks of denser fractal-like clusters connected by an intercluster region populated by unfolded protein. In addition, gelation-induced protein unfolding and cross-linking in the intercluster region changes the hydrogel mechanics, as measured by a 3-fold enhancement of the storage modulus, an increase in both the loss ratio and energy dissipation, and markedly different relaxation behavior. By controlling the protein's ability to unfold through nanoscale (un)stapling, we demonstrate the importance of in situ unfolding in defining both network architecture and mechanics, providing insight into fundamental hierarchical mechanics and a route to tune biomaterials for future applications.

Preventing post-surgical cardiac adhesions with a catechol-functionalized oxime hydrogel

Post-surgical cardiac adhesions represent a significant problem during routine cardiothoracic procedures. This fibrous tissue can impair heart function and inhibit surgical access in reoperation procedures. Here, we propose a hydrogel barrier composed of oxime crosslinked poly(ethylene glycol) (PEG) with the inclusion of a catechol (Cat) group to improve retention on the heart for pericardial adhesion prevention. This three component system is comprised of aldehyde (Ald), aminooxy (AO), and Cat functionalized PEG mixed to form the final gel (Ald-AO-Cat). Ald-AO-Cat has favorable mechanical properties, degradation kinetics, and minimal swelling, as well as superior tissue retention compared to an initial Ald-AO gel formulation. We show that the material is cytocompatible, resists cell adhesion, and led to a reduction in the severity of adhesions in an in vivo rat model. We further show feasibility in a pilot porcine study. The Ald-AO-Cat hydrogel barrier may therefore serve as a promising solution for preventing post-surgical cardiac adhesions.

The Ties that Stick: Challenges and future promise in the field of bioadhesives

Bioadhesives are wet or dry polymeric compounds that rely upon physical and chemical properties to generate characteristic sticky forces. The past decade has seen a rapidly evolving field of research around the functions, genetics, biochemistry, and mimetics of bioadhesives, but challenges unique to this research area continue to arise. We polled the presenters of SICB Symposium #8 to describe the "Ties that Stick:" challenges and exciting prospects that most resonated with their research pursuits. Themes that emerged from the poll included difficulties working with adhesive-producing organisms, field inherent knowledge gaps in theoretical modeling, molecular interactions, technology, and the interdisciplinary rigor of the bioadhesives field. We address each challenge with a discussion of the opportunities and applications presented by bioadhesives research.

In vitro evaluation of the anti-proteolytic and cross-linking effect of mussel-inspired monomer on the demineralized dentin matrix

OBJECTIVES

To evaluate the anti-proteolytic and cross-linking effect of N-(3,4-dihydroxyphenethyl)methacrylamide (DMA) on the demineralized dentin matrix in vitro.

METHODS

Four experimental solutions were selected: 50% ethanol/water solution (Control); 1, 5, and 10 mmol/L DMA dissolved in 50% ethanol/water solution. Sound human molars were sectioned to produce dentin beams with dimension of 1×1×6 mm. The dentin beams were demineralized with 10% phosphoric acid for 8 h to remove the apatite. The demineralized specimens were randomly separated into four groups and immersed in the four experimental solutions for 1 h. After the treatment, the ultimate tensile strength (UTS), loss of dry mass and the release of hydroxyproline by storing the treated specimens in 0.1 mg/mL collagenase solution for 24 h were assessed. The swelling ratio of another ten specimens from each group were evaluated. The interaction between DMA with dentin matrix was observed under Field Emission Scanning Electron Microscopy (FESEM). UTS data was analyzed by two-way ANOVA followed by Tukey test, and the other data was analyzed by one-way ANOVA followed by Tukey test (α = 0.05).

RESULTS

The two-way ANOVA factors, different solutions (p < 0.001), collagenase degradation (p < 0.001) and their interactions (p < 0.001) all significantly affected the UTS. The 10 mM DMA treatment significantly decreased the percentage of loss of dry mass, release of hydroxyproline and swelling ratio of demineralized dentin matrix compared to other treatment groups (p < 0.05). The FESEM observation depicted that with increasing concentration of DMA, the structure of dentin matrix was protected and the porosity within dentin collagen network was decreased.

CONCLUSIONS

The treatment by 10 mM DMA/ethanol solution for 1 hour is capable of enhancing the mechanical properties of demineralized dentin matrix against collagenase degradation and may be clinically useful to improve the durability of hybrid layer.

CLINICAL SIGNIFICANCE

The 10 mM DMA/ethanol primer may offer an alternative choice for dentists to strengthen the mechanical properties of demineralized dentin matrix and resist its degradation by collagenase.

Strong, non-specific adhesion using C-lectin heterotrimers in a molluscan defensive secretion

The defensive mucus produced by the slug Arion subfuscus is tough and remarkably sticky. It spreads rapidly and adheres strongly to a wide range of surfaces. The adhesion is equally strong on wettable (glass) and non-wettable (plastic) surfaces. The adhesion appears to depend on a group of proteins that adsorb equally well to a wide range of different natural and artificial surfaces. Prominent among these proteins were those that distinguish the adhesive secretion from the non-adhesive mucus. The adhesive proteins were not washed off by non-ionic detergent, nor was the adhesion of the glue as a whole affected by this treatment. In contrast, high salt concentrations washed the most abundant adhesive proteins off the surfaces, and correspondingly weakened the glue's attachment. The most abundant of the adhesive proteins were C-lectins, which appear to form heterotrimers. These and other lectin-like proteins in slug glue have a high proportion of aromatic amino acids at conserved locations, and are relatively small and often basic. The aromatic and cationic side chains may provide a powerful combination promoting and maintaining surface adhesion.