Emissions of volatile aldehydes from heated cooking oils

Fast visual detection of sunflower oil thermal oxidation using Polyacrylonitrile/Congo red nanofiber mats

Lipid oxidation monitoring is essential for food safety and quality, but traditional techniques are expensive and complicated for daily use. This study developed novel nanofiber mats using solution-blowing spinning technology to visually detect the oxidation of sunflower oil that was heated for six hours at 200 °C. These mats (Mat_1-9) are made from polyacrylonitrile (compatible with the used technique) containing various concentrations of Congo red as pH-sensitive dye (0.0025, 0.005, and 0.01 %) and hydroxylamine hydrochloride (0.125, 0.250, and 0.50 %) that react with volatile oxidation compounds to produce a striking color change. Results indicated an increase in peroxide and acid values after six hours. Mat_9 outperformed Mat_1 with a high color change (27.74 ± 0.2) and a response time of only 5 s, whereas Mat_1 took 65 s and had a far lesser response. These mats enable non-experts and food auditors to quickly assess oil quality while efficiently promoting food safety and consumer health.

Characteristics and inhalation risk of aldehydes and ketones in fumes from heated cooking rapeseed oils with different refining levels: Focusing on non-acylglycerol components

This study aimed to investigate the variations in aldehyde and ketone (AKs) concentrations and associated inhalation risks in emissions from heated rapeseed oils with different levels of non-acylglycerols. Firstly, the effect of heating temperatures and refining levels of the oil on the concentration and inhalation risk of AKs in the oil fumes was explored. The results revealed that full refining of rapeseed oil increased AKs concentration and associated inhalation risk, especially at higher temperatures. Subsequently, six representative non-acylglycerol components were added to the refined oil to investigate their effects on AKs. Results showed that both oleic acid and phosphatidylcholine increased the AKs concentrations and associated inhalation risks, whereas canolol, γ-tocopherol and β-carotene reduced the formation of AKs in refined oil fumes. Finally, the formation mechanism of AKs in oil fumes was analyzed. This work was intended to provide theoretical foundations for safer cooking practices and moderate processing of rapeseed oil.

Oxidative stability of rice flour during storage under thermal oxidation and light irradiation

The oxidative stabilities of brown and white rice flours from two varieties, Baromi2 and Samkwang, were assessed under conditions of thermal oxidation at 60 °C and fluorescent light irradiation at 25 °C. Baromi2, designed for rice flour production, and Samkwang, intended for grain consumption, exhibited differing oxidative stabilities. Utilizing solid-phase microextraction-GC/MS and electronic nose techniques, the volatile profiles and the presence of singlet oxygen were investigated. Baromi2 displayed significantly lower oxidative stability than Samkwang under both thermal and light stress (p < 0.05), largely attributed to its higher lipid and riboflavin content. The presence of 1-octen-3-ol, a primary volatile associated with singlet oxygen, was notably detected in Baromi2 brown rice flour, whereas an increased number of aldehyde volatiles were identified in its white rice flour variant. A PCA executed through the electronic nose technique substantiated the distinction in volatile profiles between Baromi2 and Samkwang, as influenced by thermal and light irradiation treatments.

Fingerprinting the emissions of volatile organic compounds emitted from the cooking of oils, herbs, and spices

Emission rates for volatile organic compounds (VOCs) have been quantified from frying, spice and herb cooking, and cooking a chicken curry, using real-time selected-ion flow-tube mass spectrometry (SIFT-MS) for controlled, laboratory-based experiments in a semi-realistic kitchen. Emissions from 7 different cooking oils were investigated during the frying of wheat flatbread (puri). These emissions were dominated by ethanol, octane, nonane and a variety of aldehydes, including acetaldehyde, heptenal and hexanal, and the average concentration of acetaldehyde (0.059-0.296 mg m-3) and hexanal (0.059-0.307 mg m-3) measured during the frying was 2-10 times higher than the recommended limits for indoor environments. Total VOC emission rates were greatest for ghee (14 mg min-1), and lowest for groundnut oil (8 mg min-1). In a second series of experiments, 16 herbs and spices were individually shallow-fried in rapeseed oil. Over 100 VOCs were identified by offline gas chromatography-mass spectrometry (GC-MS), and absolute emission rates as well as oxidant reactivity for a subset of four spices were determined. These experiments allowed distinct indoor air quality profiles to be calculated for individual oils, herbs and spices, which were used to inform and interpret more realistic cooking experiments where a full recipe of chicken curry was prepared. Total-mass VOC emissions from chicken curry were dominated by methanol (62%), monoterpenes (13%) and ethanol (10%). Additionally, a clear relationship between the cooking events and the chemical classes of VOC was observed, e.g. heating the oil (aldehydes), frying spices (monoterpenes) and adding vegetables (alcohols).

Oxidative Lipidomics to Unravel the Glycerol Core Aldehydes of Three Typical Unsaturated Triglycerides under Simulated Heating Conditions

Glycerol core aldehydes (GCAs) are significant nonvolatile aldehyde compounds generated in heated edible oils, which may pose potential health risks. Utilizing the complementary CID and EAD mass spectrometry data, this study introduced a predict-to-hit strategy, identifying 42 types of GCAs from oxidized OOO, LLL, and LnLnLn. Structural analysis revealed that oxidation occurred at both the sn-2 and sn-1/3 positions of triglyceride (TG), with the Sn-1/3 position exhibiting greater susceptibility as the degree of TG unsaturation increased. As the temperature increases, the concentration of saturated GCAs steadily rises, while unsaturated GCAs exhibit an initial increase, followed by a decrease. During further oxidation, GCAs tend to convert into hydroxyl compounds, monocyclic epoxides, dicyclic epoxides, and polycyclic epoxides, with epoxy groups predominantly forming at the 9,10 positions. These observations enhance our understanding of the formation of GCAs and promote the search for strategies to delay or prevent oxidation.

Vegetable Oils and Their Use for Frying: A Review of Their Compositional Differences and Degradation

This review provides an overview of the main vegetable oils of different botanical origin and composition that can be used for frying worldwide (olive and extra-virgin olive oil, high-oleic sunflower oil, rapeseed oil, peanut oil, rice bran oil, sunflower oil, corn oil, soybean oil, cottonseed oil, palm oil, palm kernel oil and coconut oil) and their degradation during this process. It is well known that during this culinary technique, oil's major and minor components degrade throughout different reactions, mainly thermoxidation, polymerization and, to a lesser extent, hydrolysis. If severe high temperatures are employed, isomerization to trans fatty acyl chains and cyclization are also possible. The factors conditioning frying medium degradation are addressed, including oil composition (unsaturation degree, fatty acyl chain length and "free" fatty acid content, and presence of beneficial and detrimental minor components), together with frying conditions and food characteristics. Likewise, this review also tackles how the frying oil and other processing conditions may impact on fried food quality (oil absorption, texture, flavor and color). Finally, potential health implications of fried food consumption are briefly reviewed.

Dynamics of residential indoor gas- and particle-phase water-soluble organic carbon: measurements during the CASA experiment

Previous time-integrated (2 h to 4 h) measurements show that total gas-phase water-soluble organic carbon (WSOCg) is 10 to 20 times higher inside homes compared to outside. However, concentration dynamics of WSOCg and total particle phase WSOC (WSOCp)-are not well understood. During the Chemical Assessment of Surfaces and Air (CASA) experiment, we measured concentration dynamics of WSOCg and WSOCp inside a residential test facility in the house background and during scripted activities. A total organic carbon (TOC) analyzer pulled alternately from a particle-into-liquid sampler (PILS) or a mist chamber (MC). WSOCg concentrations (215 ± 29 μg-C m-3) were generally 36× higher than WSOCp (6 ± 3 μg-C m-3) and 20× higher than outdoor levels. A building-specific emission factor (Ef) of 31 mg-C h-1 maintained the relatively high house WSOCg background, which was dominated by ethanol (46 μg-C m-3 to 82 μg-C m-3). When we opened the windows, WSOCg decayed slower (2.8 h-1) than the air change rate (21.2 h-1) and Ef increased (243 mg-C h-1). The response (increased Ef) suggests WSOCg concentrations are regulated by large near surface reservoirs rather than diffusion through surface materials. Cooking and ozone addition had a small impact on WSOC, whereas surface cleaning, volatile organic compound (VOC) additions, or wood smoke injections had significant impacts on WSOC concentrations. WSOCg concentration decay rates from these activities (0.4 h-1 to 4.0 h-1) were greater than the normal operating 0.24 h-1 air change rate, which is consistent with an important role for surface removal.

Effect of amino acids on the formation and distribution of volatile aldehydes in high oleic sunflower oil during frying

This research aims to assess the effect of amino acids as lipid antioxidants in reducing the formation of volatile aldehydes in frying oil. Methionine, histidine, and glycine at concentrations of 2.5, 5, and 10 mM were added to high oleic sunflower oil (HOSO) to investigate their effects on the distribution and formation of saturated, monounsaturated, and polyunsaturated volatile aldehydes. The results showed that the proportion of saturated volatile aldehydes was greater than that of unsaturated ones; Methionine exhibited the best inhibitory effect, after 12 h of frying, 10 mM methionine reduced the content of saturated volatile aldehydes by 24.21 %, monounsaturated by 52.4 %, and polyunsaturated by 54.73 % compared to the control. Methionine's sulfur-containing side chain was also proven to have strong antioxidant activity. Combined with the results of this study, this can also provide insights for using amino acids as lipid antioxidants.

From Palm to Plate: Unveiling the Potential of Coconut as a Plant-Based Food Alternative

This review investigates coconut as a sustainable and nutrient-rich plant-based alternative to traditional animal-based food sources. We have explored the nutritional profile, culinary versatility, particularly focusing on the use of coconut meat, milk, cream, and oil in diverse dietary contexts when consumed in balance. Comparative analysis with animal-derived products reveals the high content of medium-chain triglycerides (MCTs), essential vitamins, and minerals in coconut, contrasted with its lower protein content. Researchers have underscored the environmental sustainability of coconut, advocating for its role in eco-friendly food production chains. We have also addressed challenges like potential allergies, nutritional balance, sensory attributes, and consumer motivations for coconut-based products, in terms of understanding the market dynamics. In conclusion, this review positions coconut as a promising candidate within sustainable diet frameworks, advocating for further research to augment its nutritional value, sensory characteristics, and product stability, thereby facilitating its integration into health-conscious and eco-centric dietary practices.

Multiple effects of relative humidity on heterogeneous ozonolysis of cooking organic aerosol proxies from heated peanut oil emissions

The exposure to cooking organic aerosols (COA) is closely related to people's daily lives. Despite extensive investigations into COA's model compounds like oleic acid, the intricacies of heterogeneous ozonolysis of real COA and the effects of ambient conditions like humidity remain elusive. In this work, the ozonolysis of COA proxies from heated peanut oil emissions was investigated using diffuse reflectance infrared Fourier transform (DRIFTS) spectroscopy, and proton transfer reaction time-of-flight mass spectrometer (PTR-ToF-MS). We found that humidity hinders the reaction between ozone and CC double bonds due to the competitive adsorption of water and ozone on COA. Although visible light has little influence on the ozonolysis of COA in the absence of humidity, the ozonolytic CO production is significantly promoted by visible light in the presence of humidity. It may be attributed to the formation of water-derived reactive oxygen species (ROS, mainly HO•) from the photosensitization of polycyclic aromatic hydrocarbons (PAHs) in COA. We also found that humidity can enhance the depolymerization of carboxylic acid dimers and hydrolysis of intrinsic acetals in the COA. Moreover, humidity promotes the release of VOCs during both the dark and light ozonolysis of COA. This work reveals the important roles of humidity-responsive and photo-responsive components in COA during its ozonolysis, and the change in VOC release may guide the control of human VOC exposure in indoor air.

Composition analysis and health risk assessment of the hazardous compounds in cooking fumes emitted from heated soybean oils with different refining levels

The cooking fumes generated from thermal cooking oils contains various of hazardous components and shows deleterious health effects. The edible oil refining is designed to improve the oil quality and safety. While, there remains unknown about the connections between the characteristics and health risks of the cooking fumes and oils with different refining levels. In this study, the hazardous compounds, including aldehydes, ketones, polycyclic aromatic hydrocarbons (PAHs), and particulate matter (PM) in the fumes emitted from heated soybean oils with different refining levels were characterized, and their health risks were assessed. Results demonstrated that the concentration range of aldehydes and ketones (from 328.06 ± 24.64 to 796.52 ± 29.67 μg/m3), PAHs (from 4.39 ± 0.19 to 7.86 ± 0.51 μg/m3), and PM (from 0.36 ± 0.14 to 5.08 ± 0.15 mg/m3) varied among soybean oil with different refining levels, respectively. The neutralized oil showed the highest concentration of aldehydes and ketones, whereas the refined oil showed the lowest. The highest concentration levels of PAHs and PM were observed in fumes emitted from crude oil. A highly significant (p < 0.001) positive correlation between the acid value of cooking oil and the concentrations of PM was found, suggesting that removing free fatty acids is critical for mitigating PM concentration in cooking fumes. Additionally, the incremental lifetime cancer risk (ILCR) values of PAHs and aldehydes were 5.60 × 10-4 to 8.66 × 10-5 and 5.60 × 10-4 to 8.66 × 10-5, respectively, which were substantially higher than the acceptable levels (1.0 × 10-6) established by US EPA. The present study quantifies the impact of edible oil refining on hazardous compound emissions and provides a theoretical basis for controlling the health risks of cooking fumes via precise edible oil processing.

Online Exploring the Gaseous Oil Fumes from Oleic Acid Thermal Oxidation by Synchrotron Radiation Photoionization Mass Spectrometry

Cooking oil fumes are an intricate and dynamic mixture containing a variety of poisonous and hazardous substances, and their real-time study remains challenging. Based on tunable synchrotron radiation photoionization mass spectrometry (SR-PIMS), isomeric/isobaric compounds in the gaseous oil fumes from oleic acid thermal oxidation were determined in real time and distinguished by photoionization efficiency (PIE) curve simulation combined with multiple linear regression (MLR) analysis. A series of common carcinogens such as formaldehyde, acetaldehyde, acrolein, and several unreported chemicals including diethyl ether and formylcyclohexane were successfully characterized. Moreover, time-resolved profiles of certain components in gaseous oil fumes were monitored for 55 h. Distinct evolutionary processes were observed, indicating the consumption and formation of parent molecules, intermediates, and final products.

Study on the thermal oxidation of oleic, linoleic and linolenic acids by synchrotron radiation photoionization mass spectrometry

RATIONALE

Cooking oil fumes contain numerous hazardous and carcinogenic chemicals, posing potential threats to human health. However, the sources of these species remain ambiguous, impeding health risk assessment, pollution control and mechanism research.

METHODS

To address this issue, the thermal oxidation of three common unsaturated fatty acids (UFAs), namely oleic, linoleic and linolenic acids, present in vegetable oils was investigated. The volatile and semi-volatile products were comprehensively characterized by online synchrotron radiation photoionization mass spectrometry (SR-PIMS) with two modes, which were validated and complemented using offline gas chromatography (GC)/MS methods. Tunable SR-PIMS combined with photoionization efficiency curve simulation enabled the recognition of isomers/isobars in gaseous fumes.

RESULTS

SR-PIMS revealed over 100 products, including aldehydes, alkenes, furans, aromatic hydrocarbons, etc., such as small molecules of formaldehyde, acetaldehyde, acrolein, ethylene and furan, which are not readily detected by conventional GC/MS; and some unreported fractions, e.g. ketene, 4-ethylcyclohexene and cycloundecene(E), were also observed. Furthermore, real-time monitoring of product emissions during the thermal oxidation of the three UFAs via SR-PIMS revealed that linolenic acid may be the major source of acrolein.

CONCLUSION

SR-PIMS has been demonstrated as a powerful technique for online investigation of cooking oil fumes. This study achieved comprehensive characterization of volatile and semi-volatile products from the thermal oxidation of oleic, linoleic and linolenic acids, facilitating the traceability of species in cooking fumes and aiding in exploring the thermal reactions of different vegetable oils.

Particulate Matter and Volatile Organic Compound Emissions Generated from a Domestic Air Fryer

Air frying has become a popular cooking method for domestic cooking, but the level of released indoor air pollutants is poorly understood. In this work, we compared particle and gas phase emission factors (EF) and particle size distributions between cooking with a domestic air fryer and a pan for a variety of foods. The PM10 EFs of air frying chicken wings and breast were higher than pan cooking by a factor of 2.1 and 5.4, respectively. On the other hand, a higher PM10 emission factor from air frying can be achieved by increasing the amount of oil to levels similar to or above those from pan-frying for French fries and asparagus. We propose that higher temperature and greater turbulence lead to higher PM10 EFs for cooking with the air fryer compared with the pan for the same mass of oil added. EFs of volatile organic compounds (VOCs) are also generally higher for cooking with the air fryer compared with the pan: 2.5 times higher for French fries and 4.8 times higher for chicken breast. Our study highlights the potential risk of higher indoor PM10 levels associated with domestic air frying under certain cases and proposes possible mitigation measures.

A measurement and modelling investigation of the indoor air chemistry following cooking activities

Domestic cooking is a source of indoor air pollutants, including volatile organic compounds (VOCs), which can impact on indoor air quality. However, the real-time VOC emissions from cooking are not well characterised, and similarly, the resulting secondary chemistry is poorly understood. Here, selected-ion flow-tube mass spectrometry (SIFT-MS) was used to monitor the real-time VOC emissions during the cooking of a scripted chicken and vegetable stir-fry meal, in a room scale, semi-realistic environment. The VOC emissions were dominated by alcohols (70% of total emission), but also contained a range of aldehydes (14%) and terpenes (5%), largely attributable to the heating of oil and the preparation and heating of spices, respectively. The direct cooking-related VOC emissions were then simulated using the Indoor Chemical Model in Python (INCHEM-Py), to investigate the resulting secondary chemistry. Modelling revealed that VOC concentrations were dominated by direct emissions, with only a small contribution from secondary products, though the secondary species were longer lived than the directly emitted species. Following cooking, hydroxyl radical concentrations reduced by 86%, while organic peroxy radical levels increased by over 700%, later forming secondary organic nitrates, peroxyacylnitrates (PANs) and formaldehyde. Monoterpene emissions were shown to drive the formation of secondary formaldehyde, albeit to produce relatively modest concentrations (average of 60 ppt). Sensitivity analysis of the simulation conditions revealed that increasing the outdoor concentrations of ozone and NOx species (2.9× and 9×, respectively) resulted in the greatest increase in secondary product formation indoors (≈400%, 200% and 600% increase in organic nitrates, PANs and formaldehyde production, respectively). Given the fact that climate change is likely to result in increased ozone concentrations in the future, and that increased window-opening in response to rising temperatures is also likely, higher concentrations of indoor oxidants are likely in homes in the future. This work, therefore, suggests that cooking could be a more important source of secondary pollutants indoors in the future.

Kinetics of chemical deteriorations over the frying protected by gallic acid and methyl gallate

The present work shows the possibility of use of gallic acid (GA) and methyl gallate (MG) as natural antioxidants replacing the powerful synthetic antioxidant TBHQ in frying process. Oxidative stability index (OSI) and the kinetics of change in lipid-peroxidation conjugated dienes (LCD), carbonyls (LCO), and acid value were adopted for the evaluation purposes. GA alone (1.2 mM) and in combination with MG (75:25) provided OSI values comparable to that of TBHQ (18.5-19.0 h). The GA/MG 75:25 exerted a frying performance quite better than TBHQ (r_n = 0.1351 vs. 0.1784 h^-1) in preventing the LCD formation. From the LCO formation standpoint, the GA/MG 75:25 (r_n = 0.0758 h^-1) and then MG (r_n = 0.1004 h^-1) provided better performances than TBHQ (r_n = 0.1216 h^-1). Lipid hydrolysis was also inhibited well by GA (AV_m = 8.6) and GA/MG 75:25 (AV_m = 7.9), respectively (AV_m = 9.2 for TBHQ).

Aldehyde-Associated Mutagenesis─Current State of Knowledge

Aldehydes are widespread in the environment, with multiple sources such as food and beverages, industrial effluents, cigarette smoke, and additives. The toxic effects of exposure to several aldehydes have been observed in numerous studies. At the molecular level, aldehydes damage DNA, cross-link DNA and proteins, lead to lipid peroxidation, and are associated with increased disease risk including cancer. People genetically predisposed to aldehyde sensitivity exhibit severe health outcomes. In various diseases such as Fanconi's anemia and Cockayne syndrome, loss of aldehyde-metabolizing pathways in conjunction with defects in DNA repair leads to widespread DNA damage. Importantly, aldehyde-associated mutagenicity is being explored in a growing number of studies, which could offer key insights into how they potentially contribute to tumorigenesis. Here, we review the genotoxic effects of various aldehydes, focusing particularly on the DNA adducts underlying the mutagenicity of environmentally derived aldehydes. We summarize the chemical structures of the aldehydes and their predominant DNA adducts, discuss various methodologies, in vitro and in vivo, commonly used in measuring aldehyde-associated mutagenesis, and highlight some recent studies looking at aldehyde-associated mutation signatures and spectra. We conclude the Review with a discussion on the challenges and future perspectives of investigating aldehyde-associated mutagenesis.

Oxidative Stability and Genotoxic Activity of Vegetable Oils Subjected to Accelerated Oxidation and Cooking Conditions

The oxidative stability and genotoxicity of coconut, rapeseed and grape seed oils were evaluated. Samples were submitted to different treatments: 10 days at 65 °C, 20 days at 65 °C (accelerated storage) and 90 min at 180 °C. Peroxide values and thiobarbituric acid reactive substances values were altered as a function of storage time, but their greatest changes were recorded in samples subjected to 180 °C. Fatty acid profiles did not show significant changes from the nutritional point of view. Volatile compounds showed the highest increases at 180 °C for 90 min (18, 30 and 35 fold the amount in unheated samples in rapeseed, grape seed and coconut oils, respectively), particularly due to the increment in aldehydes. This family accounted for 60, 82 and 90% of the total area in coconut, rapeseed and grapeseed oil, respectively, with cooking. Mutagenicity was not detected in any case in a miniaturized version of the Ames test using TA97a and TA98 Salmonella typhimurium strains. Despite the increment in the presence of lipid oxidation compounds in the three oils, they were not compromised from the safety perspective.

Investigating aldehyde and ketone compounds produced from indoor cooking emissions and assessing their health risk to human beings

Aldehyde and ketone compounds are ubiquitous in the air and prone to adverse effects on human health. Cooking emission is one of the major indoor sources. Aiming to evaluate health risks associated with inhalation exposure to aldehyde and ketone compounds, 13 carbonyl compounds (CCs) released from heating 5 edible oils, 3 seasonings, and 2 dishes were investigated in a kitchen laboratory. For the scenarios of heating five types of oil, aldehydes accounted for 61.1%-78.0% of the total emission, mainly acetaldehyde, acrolein and hexanal. Comparatively, heating oil with added seasonings released greater concentrations of aldehyde and ketone compounds. The concentration enhancement of larger molecular aldehydes was significantly greater. The emission factors of aldehyde and ketone compounds for cooking the dish of chili fried meat were much greater compared to that of tomato fried eggs. Therefore, food materials also had a great impact on the aldehyde and ketone emissions. Acetone and acetaldehyde were the most abundant CCs in the kitchen. Acrolein concentrations ranged from 235.18 to 498.71 µg/m³, which was about 100 times greater compared to the guidelines provided by Office of Environmental Health Hazard Assessment (OEHHA). The acetaldehyde inhalation for adults was 856.83-1515.55 µg and 56.23-192.79 µg from exposure to chili fried meat and tomato fried eggs, respectively. This exceeds the reference value of 90 µg/day provided by OEHHA. The findings of this study provided scientific evidences for the roles of cooking emissions on indoor air quality and human health.

Emission characteristics and quantitative assessment of the health risks of cooking fumes during outdoor barbecuing

Given the increasing popularity of outdoor barbecue activities and the disregard for barbecue fumes, this study systematically investigated barbecue fume emission characteristics for three types of grilled meats. Particulate matter and volatile organic compounds (VOCs) were continuously measured, and polycyclic aromatic hydrocarbons (PAHs) were isolated from the particulate matter. Cooking emission concentrations depended strongly on the type of meat being cooked. Fine particles were the main particles detected in this study. Low and medium-weight PAHs were the dominant species for all cooking experiments. The mass concentration of total VOCs in the barbecue smoke of the three groups showed significant differences (p < 0.05) and was 1667.18 ± 10.49 μg/m³ in the chicken wing group, 904.03 ± 7.12 μg/m³ in the beef steak group, and 3653.37 ± 12.22 μg/m³ in the streaky pork group. The results of risk assessment showed that the toxicity equivalent quality (TEQ) of carcinogenic PAHs in the particulate matter was significantly higher in the streaky pork group than in the chicken wing and beef steak groups. The carcinogenic risk of benzene exceeds the US EPA standard (1.0E-6) in all types of fumes. Although the hazard index (HI) was below one in all groups for noncarcinogenic risks, it was not cause of optimism. We conjecture that only 500 g of streaky pork would exceed the noncarcinogenic risk limit, and the mass required for carcinogenic risk may be less. When barbecuing, it is essential to avoid high-fat foods and strictly control the fat quantity. This study quantifies the incremental risk of specific foods to consumers and will hopefully provide insight into the hazards of barbecue fumes.

Diet as a Source of Acrolein: Molecular Basis of Aldehyde Biological Activity in Diabetes and Digestive System Diseases

Acrolein, a highly reactive α,β-unsaturated aldehyde, is a compound involved in the pathogenesis of many diseases, including neurodegenerative diseases, cardiovascular and respiratory diseases, diabetes mellitus, and the development of cancers of various origins. In addition to environmental pollution (e.g., from car exhaust fumes) and tobacco smoke, a serious source of acrolein is our daily diet and improper thermal processing of animal and vegetable fats, carbohydrates, and amino acids. Dietary intake is one of the main routes of human exposure to acrolein, which is a major public health concern. This review focuses on the molecular mechanisms of acrolein activity in the context of its involvement in the pathogenesis of diseases related to the digestive system, including diabetes, alcoholic liver disease, and intestinal cancer.

Formation pathways of aldehydes from heated cooking oils

Cooking emissions account for a major fraction of urban volatile organic compounds and organic aerosol. Aldehyde species, in particular, are important exposure hazards in indoor residential and occupational environments, and precursors to particulate matter and ozone formation in outdoor air. Formation pathways of aldehydes from oils that lead to their emissions are not well understood. In this work, we investigate the underlying mechanisms involved in the formation of aldehydes from heated cooking oil emissions, through studying how antioxidants and oil composition modulate oxidation chemistry. Our results demonstrate that gaseous emissions are driven by radical-mediated autoxidation reactions in cooking oil, and the composition of cooking oils strongly influences the reaction mechanisms. Antioxidants have a dual effect on aldehyde emissions depending on the rates of radical propagation reactions. We propose a mechanistic framework that can be used to understand and predict cooking emissions under different cooking conditions. Our results highlight the need to understand the rates and mechanisms of autoxidation and other reactions in cooking oils in order to accurately predict the gas- and particle-phase emissions from food cooking in urban atmospheres.

Effects of quercetin on emissions of aldehydes from heated docosahexaenoic acid (DHA)-fortified soybean oil

Home cooking has been considered as an indoor pollution problem since cooking oil fumes contain various toxic chemicals such as aldehydes. Fortifying edible oils with docosahexaenoic acid (DHA) has been applied to enhance the nutritional value of oils. This study designed a frying simulation system and examined the effect of oil type, DHA fortification, heating time, and addition of natural antioxidant on the emissions of aldehydes from heated oils. Results showed that linseed oil had the highest total aldehyde emissions, followed by soybean oil, peanut oil, and palm oil. Fortifying soybean oil with DHA increased the toxic aldehydes emitted. Quercetin, a flavonoid, significantly reduced aldehydes emitted from DHA-fortified soybean oil (by up to 39.80%) to levels similar to those of normal soybean oil. Further analysis showed that DHA-fortified soybean oil with quercetin had a significantly higher DHA and unsaturated fatty acids (UFAs) content than the control oil at each heating time point. The result indicated that quercetin inhibited emissions of aldehydes, at least in part, by protecting UFAs from oxidation. Collectively, quercetin could be used as a natural additive in DHA-fortified and normal cooking oils to reduce aldehyde emissions, indoor air pollution, and preserve functional DHA and other UFAs.

Identifying Patterns and Sources of Fine and Ultrafine Particulate Matter in London Using Mobile Measurements of Lung-Deposited Surface Area

We performed more than a year of mobile, 1 Hz measurements of lung-deposited surface area (LDSA, the surface area of 20-400 nm diameter particles, deposited in alveolar regions of lungs) and optically assessed fine particulate matter (PM_2.5), black carbon (BC), and nitrogen dioxide (NO₂) in central London. We spatially correlated these pollutants to two urban emission sources: major roadways and restaurants. We show that optical PM_2.5 is an ineffective indicator of tailpipe emissions on major roadways, where we do observe statistically higher LDSA, BC, and NO₂. Additionally, we find pollutant hot spots in commercial neighborhoods with more restaurants. A low LDSA (15 μm² cm^-3) occurs in areas with fewer major roadways and restaurants, while the highest LDSA (25 μm² cm^-3) occurs in areas with more of both sources. By isolating areas that are higher in one source than the other, we demonstrate the comparable impacts of traffic and restaurants on LDSA. Ratios of hyperlocal enhancements (ΔLDSA:ΔBC and ΔLDSA:ΔNO₂) are higher in commercial neighborhoods than on major roadways, further demonstrating the influence of restaurant emissions on LDSA. We demonstrate the added value of using particle surface in identifying hyperlocal patterns of health-relevant PM components, especially in areas with strong vehicular emissions where the high LDSA does not translate to high PM_2.5.

The effect of PhIP precursors on the generation of particulate matter in cooking oil fumes at high cooking temperatures and the inflammation response in human lung cells

Cooking Oil Fumes (COFs) contain carcinogenic organic substances such as polycyclic aromatic hydrocarbons (PAHs) and heterocyclic amines (HCAs), of which 2-Amino-1-methyl-6-phenylimidazo(4,5-b)pyridine (PhIP) is known as mainly meat-borne carcinogens. In this work, to identify the mechanisms to induce the inflammation response in human lung cells (A549) exposed to COFs, we investigated the physicochemical and biological characteristics of COFs generated with PhIP precursors (L-phenylalanine, creatinine, and glucose) at high cooking temperatures (300 °C and 600 °C). Interestingly, we found that PhIP was not formed both at 300 °C and 600 °C, while a large number of carbon nanoparticles were generated from soybean oil containing the PhIP precursors at 600 °C. From the biological analysis, COFs generated with the PhIP precursors at 600 °C induced the most significant pro-inflammatory cytokine (IL-6). This result indicates that the particulate matter in COFs generated with the PhIP precursors above the smoke temperature is the primary factor directly affecting the lung inflammatory response rather than PhIP. This study demonstrates for the first time a novel principle of the inflammatory response that the PhIP precursors can aggravate lung injury by affecting the physical properties of COFs depending on cooking temperature. Therefore, our finding is a significant result of overcoming the bias in previous studies focusing only on the chemical toxicity of PhIP in the inflammatory response of COFs.

Quality Change in Camellia Oil during Intermittent Frying

Camellia oil with a high oleic acid content is widely used for frying. To comprehensively describe the quality change in camellia oil during frying, the changes in composition, deterioration indicators, and volatile profiles were investigated. The results showed that tocopherols mainly degraded in the early stage of frying, followed by unsaturated fatty acids (UFA). This caused the carbonyl value and total polar compounds level to significantly increase. Moreover, frying promoted the accumulation of volatile compounds in terms of type and abundance, especially aldehydes, which are related to the degradation of UFA. Principal component analysis showed that the frying of camellia oil was divided into three stages. First, the camellia oil with a heating time of 2.5-7.5 h showed excellent quality, where tocopherol played a major role in preventing the loss of UFA and was in the degradation acceleration stage. Subsequently, as tocopherol entered the degradation deceleration stage, the quality of camellia oil heated for 10.0-15.0 h presented a transition from good to deteriorated. Finally, tocopherol entered the degradation stagnation stage, and the quality of camellia oil heated for 17.5-25.0 h gradually deteriorated, accompanied by a high level of volatile compounds and deterioration indicators. Overall, this work comprehensively determined the deterioration of camellia oil during intermittent frying and offered valuable insights for its quality evaluation.

Chemical Properties of Peanut Oil from Arachis hypogaea L. 'Tainan 14' and Its Oxidized Volatile Formation

Arachis hypogaea L. ‘Tainan 14’ has purple skin characteristics. This study investigated the effects of different materials (shelled or unshelled peanuts) and temperatures (120 or 140 °C) on the properties of extracted peanut oil. The results show that its antioxidant components (total flavonoid, α−tocopherol, and γ-tocopherol) and oxidative stability were mainly affected by the roasting temperature (p < 0.05). Fifty-eight volatile compounds were identified by peanut oil oxidation and divided into three main groups during the roasting process using principal component analysis. The volatile formation changes of different materials and temperatures were assessed by agglomerative hierarchical clustering analysis. These results provide useful reference information for peanut oil applications in the food industry.

Kinetic and Products Study of the Atmospheric Degradation of trans-2-Hexenal with Cl Atoms

The gas-phase reaction between trans-2-hexenal (T2H) and chlorine atoms (Cl) was studied using three complementary experimental setups at atmospheric pressure and room temperature. In this work, we studied the rate constant for the titled oxidation reaction as well as the formation of the gas-phase products and secondary organic aerosols (SOAs). The rate constant of the T2H + Cl reaction was determined using the relative method in a simulation chamber using proton-transfer reaction time-of-flight mass spectrometry (PTR-ToF-MS) to monitor the loss of T2H and the reference compound. An average reaction rate constant of (3.17 ± 0.72) × 10^-10 cm³ molecule^-1 s^-1 was obtained. From this, the atmospheric lifetime of T2H due to Cl reaction was estimated to be 9 h for coastal regions. HCl, CO, and butanal were identified as primary products using Fourier transform infrared spectroscopy (FTIR). The molar yield of butanal was (6.4 ± 0.3)%. Formic acid was identified as a secondary product by FTIR. In addition, butanal, 2-chlorohexenal, and 2-hexenoic acid were identified as products by gas chromatography coupled to mass spectrometry but not quantified. A reaction mechanism is proposed based on the observed products. SOA formation was observed by using a fast mobility particle sizer spectrometer. The measured SOA yields reached maximum values of about 38% at high particle mass concentrations. This work exhibits for the first time that T2H can be a source of SOA in coastal atmospheres, where Cl concentrations can be high at dawn, or in industrial areas, such as ceramic industries, where Cl precursors may be present.

Perilla frutescens seed meal as a fat substitute mitigates heterocyclic amine formation and protein oxidation and improves fatty acid profile of pan-fried chicken patties

Fatty acid profile, protein and fatty acid oxidation and flavor profile of pan-fried chicken patties formulated with various levels of Perilla frutescens seed meal (PSM) as a fat substitute was investigated in this study. The formation of heterocyclic amines (HCAs) in the chicken patties was also evaluated. The results showed that pan-fried patties formulated with 20% PSM (PSM4) had the highest ranges of oleic acid and ΣMUFA content and ΣPUFA/ΣSFA ratio. Low to medium levels of PSM (PSM1, 2, and 3 corresponding to 5, 10, and 15% of PSM, respectively) reduced the content of lipid peroxidation products, while high level (PSM4) increased it. All levels of PSM were also found to be effective against elevation in carbonyl content relative to the control. Moreover, the PSM effectively inhibited HCA formation in the chicken patties. The total contents of HCAs in PSM1, PSM2, PSM3, and PSM4 samples were significantly (P < 0.05) lower than that of the control sample, corresponding to 31.9, 46.1, 57.2, and 44.8% inhibition, respectively. PSM4, however, had no or very little effect on the formation of PhIP, 4,8-DiMeIQx and AαC, despite a strong inhibitory effect on MeIQx formation. These findings not only support the promising potential of PSM for application as a fat substitute to improve the fatty acid profile and reduce the content of harmful by-products in heat-processed chicken, but also highlight that appropriate addition level is a critical factor in optimizing the functional capacity of this natural agent.

An Evaluation Model for the Quality of Frying Oil Using Key Aldehyde Detected by HS-GC/MS

To establish a practical model for evaluating the oxidation of frying oil using aldehydes, the aldehydes of 10 commercial oils during frying at 180 °C were identified using headspace-gas chromatography/mass spectrometry, and the changes of common aldehydes and their correlation with carbonyl values (CV) were analyzed. The results showed that the total peak area of aldehydes increased significantly with heating time, which was related to the fatty acid and tocopherol contents of the oils. There were four common aldehydes with different trends during frying, namely, pentanal, hexanal, (E)-hept-2-enal, and nonanal. Moreover, pentanal with a high correlation with CV was selected as the quality evaluating index of frying oil due to its stable accumulation over time. Based on the linear fitting relationships between CV and pentanal, as well as the initial content ratio of linoleic acid to palmitic acid and total tocopherols in oils, a predictive model was established for evaluating the quality of frying oils with high precision and non-reagent by using mass spectrometry. In summary, this work provides theoretical support for using aldehyde as the quality evaluation index of frying oil and provides a new idea for evaluating oil deterioration from the perspective of volatile compounds.

Particulate matters, aldehydes, and polycyclic aromatic hydrocarbons produced from deep-frying emissions: comparisons of three cooking oils with distinct fatty acid profiles

It is recognized that hazardous emissions produced from frying oils may be related to oil properties, particularly the fatty acid composition. However, investigations have been limited and partial. In this work, the emissions from deep-frying foods with three oils (palm, olive, and soybean oils) with distinct fatty acid profiles were comprehensively examined in a simulated kitchen, and the interrelationship among emitted substances, oil quality parameters, and fatty acids profiles was explored. Firstly, palm oil emitted the highest number concentration of total particle matters ((3895 ± 1796) × 103 #/cm3), mainly in the Aitken mode (20-100 nm). We observed a positive correlation between particle number concentration and levels of palmitic acid, a major saturated fatty acid (SAFA) (rs = 0.73, p < 0.05), and total polar compounds (TPC) (rs = 0.68, p < 0.05) in the fried oil, a degradation marker which was also positively correlated with that of black carbon (BC) (rs = 0.68, p < 0.05). Secondly, soybean oil emitted the highest level of gaseous aldehydes (3636 ± 607 μg/m3), including acrolein, propinoaldehyde, crotonaldehyde, hexanal, and trans-2-heptenal; the total aldehyde concentration were positively correlated with α-linolenic acid (ALA) percentage (rs = 0.78, p < 0.01), while hexanal and trans-2-heptenal were with linoleic acid (LA) (rs = 0.73 and 0.67, p < 0.05). LA and ALA were two major polyunsaturated fatty acids in non-tropical plant oils. Thirdly, palm oil emitted the most particle-bound polycyclic aromatic hydrocarbons (PAHs), and a positive association was discovered between two PAHs and SAFA percentage. Olive oil seems superior to soybean and palm oils with regards to toxic emissions during deep-frying.

Impact of Heating Temperature and Fatty Acid Type on the Formation of Lipid Oxidation Products During Thermal Processing

Thermal treatment of lipids rich in fatty acids contributes to the formation of lipid oxidation products (LOPs), which have potentially harmful effects on human health. This study included soybean oil (SO), palm oil (PO), olive oil (OO), and lard oil (LO) as the research objects, with an aim to investigate the impact of heating temperature and fatty acid type on the generation of LOPs (α-dicarbonyl compounds, malondialdehyde (MDA), α,β-unsaturated aldehydes, and 16 volatile aldehydes). Results showed that LOPs increased significantly (p &lt; 0.05) with the increase in temperature (100 ~ 200°C). Furthermore, the amount of 2,3-butanedione (159.53 μg/g), MDA (3.15 μg/g), 4-hydroxy-hexenal (3.03 μg/g), 2-butenal (292.18%), 2-pentenal (102.26%), hexanal (898.72%), and 2,4-heptadienal (E, E) (2182.05%) were more at 200°C in SO rich in polyunsaturated fatty acids (PUFAs) than other oils. Results from heat map analysis indicated that the 2, 4-heptadienal, and glyoxal related to the myristic acid of oil. Moreover, the MDA was in close association with PUFAs. Based on the effect of temperature and fatty acid type on the generation of LOPs, this study could serve as a control method to reduce harmful LOPs.

Physicochemical properties and volatile formation mechanism of medium-chain triacylglycerols during heating

Medium-chain triacylglycerols (MCTs), including caprylic acid (C8), a mixture of caprylic acid and capric acid (C8+C10), and high-MCT coconut oil (HMCO), were heated at 180°C. Their volatile profiles were analyzed to determine the MCT degradation mechanisms. As heating time increased to 10 h, secondary oxidation products and acid value of all samples increased continuously. Ketones, alkanes, fatty acid anions, fatty acid esters, and lactones were found in all heated MCTs. 2-Hexanone and heptane were detected in C8 after 2 h of heating, and 2-heptanone, heptanal, methyl octanoate, γ-octalactone, and δ-octalactone were detected after 4 h. For the C8+C10, ketones, alkanes, and aldehydes were first observed. Hydrolysis and decarboxylation seem to occur first for ketone and alkane formation. Cracking and cyclization may occur later for fatty acid esters and lactones in heated MCTs. This result can help to understand thermal decomposition mechanisms of saturated fatty acids like MCTs. PRACTICAL APPLICATION: Medium-chain triacylglycerols (MCTs) have been used in cosmetic and fragrance industries due to their high oxidative stability, relatively high polarity, and smooth textures. In addition, MCTs have gained popularity among consumers for their health beneficial effects. MCTs could be used as major continuous phases for many food ingredients receiving high thermal energy for cooking. The results of this study can provide basic and useful information on the physicochemical properties and thermally decomposed volatile profiles from MCTs, which can help to produce stable processed products with lengthy shelf-lives in the food industry.

Potential Matrix Effects in Iodometry Determination of Peroxides Induced by Olefins

Peroxides (H₂O₂, ROOR, and ROOH) are an important reaction intermediate involved in a number of natural processes, including atmospheric autoxidation and lipid peroxidation in oils and animal tissues. Iodometry is an established spectroscopic technique that has been widely used to quantify total peroxide concentration in food, indoor, and outdoor samples. Iodometry provides selectivity toward peroxides through a quantitative reaction between I^- and peroxides to form I₃^- via a molecular iodine (I₂) intermediate. However, equilibrium changes caused by a potential interaction between olefinic species and I₂ can suppress I₃^- formation, thereby underestimating peroxide concentration. For the first time in the current study, this unrecognized interference posed by olefins (OEs) is systematically investigated to gauge its effects on the accuracy of iodometry. A number of model molecules were investigated. The interference was observed to be unique to OEs, but universally affecting different peroxide species such as H₂O₂, tert-butyl hydroperoxide, and aerosol-bound peroxides. A simple kinetic box model was built to explain this chemistry. The measured rate constant for 3-octenoic acid was found to be 0.84 ± 0.02 M^-1 s^-1. Overall, our results show matrix effects induced by OEs can underestimate peroxide concentration determined by iodometry for edible oils, indoor environments, and animal fat, but absent in most of the atmospheric samples. Nonetheless, our results point out the importance of this interfering chemistry in matrices enriched with OEs.

Assessing Impacts of Additives on Particulate Matter and Volatile Organic Compounds Produced from the Grilling of Meat

Cooking fumes are an important source of volatile organic compounds (VOCs), particulate matter (PM), and carbonyl compounds. The additive is wildly applied in grilling meat for flavor improvement. However, the effects of additives on cooking fumes emissions, such as volatile organic compounds (VOCs), particulate matter (PM), and carbonyl compounds, in meat grilling have not been studied. The impact of four additives, including white pepper, salt, garlic powder, and compound marinade, on the emission characteristics of cooking fumes from the grilling meat was investigated. The concentrations of VOCs and carbonyl compounds in the cooking fumes were analyzed by TD-GC/MS and HPLC, respectively. The PM emission characteristics (mass concentration and size distribution) were measured by DustTrak DRX aerosol monitor in real-time. Results showed that the application of white pepper, salt, garlic powder, and mixed spices could significantly reduce the total particles mass concentration (TPM) emissions during meat-grilling by 65.07%, 47.86%, 32.87%, and 56.01%, respectively. The mass concentration of PM during meat-grilling reached maximum values ranging from 350 to 390 s and gradually fell at the final stages of grilling. The total concentration of 22 representative VOCs emitted from the grilling was significantly increased in grilling meat marinated with compound additives. Aromatic hydrocarbons were the predominant VOCs species, followed by ketone compounds. During the grilling process, formaldehyde, acetaldehyde, propionaldehyde, and acetone were major carbonyl compounds. The low molecular weight carbonyl compounds (C1–C3) in cooking fumes were dominant carbonyl compounds.

Emission of BTEX compounds from the frying process: Quantification, environmental effects, and probabilistic health risk assessment

Frying is one of the cooking methods which generates mono aromatic hydrocarbons, including benzene, toluene, ethylbenzene, and xylene (BTEX); subsequently, it affects health through carcinogenic (CR) and non-carcinogenic risks (n-CR). However, their environmental effects known by secondary organic aerosols (SOA) and ozone formation potential (OFP) were also attended by many scientists. Therefore, this study quantified the BTEX emissions from 4 types of most commonly used edible oils (canola, corn, sunflower, and blend) under various frying conditions of temperatures and food additives. Furthermore, the effects of the chemicals in the light of health (CR and n-CR) and environment (SOA and OFP) were also investigated. The study results showed that higher temperatures could significantly increase the emissions, while the addition of food ingredients significantly reduces the emissions. The rank order of emitted chemical was obtained as T > B > E > X. The blend had the most emission among oils, followed by, in descending order, corn, sunflower, and canola. In association with environmental effects, the orders of X > T > E > B and T ∼ E > X > B were obtained for OFP and SOA, respectively. THQ for blend, corn, canola, and sunflower oils was higher than 1 (1.76, 1.35, 1.27, and 1.002, respectively), showing a considerable n-CR when the hood was off. In this respect, TCR for the oils (1.78 × 10^-4, 1.45 × 10^-4, 1.39 × 10^-4, and 1.05 × 10^-4, respectively) shown the probable risk for all oils. Moreover, hood switching reduced the risk by about 11-81%.

Effects of roasting temperature and time on aldehyde formation derived from lipid oxidation in scallop (Patinopecten yessoensis) and the deterrent effect by antioxidants of bamboo leaves

This study aimed to investigate the effects of roasting temperature and time on aldehyde formation derived from lipid oxidation in scallop, and the deterrent effect of natural antioxidants extracted from bamboo leaves (AOB). Results showed that roasting process significantly increased the peroxide value (PV), thiobarbituric acid-reactive substances (TBARS), p-Anisidine value (p-AV), and total oxidation (TOTOX) in scallop lipids. Besides, 16 different aldehydes in scallop lipids were detected using an HPLC-ESI-MS/MS method. Among them, the content of hexanal, pentanal, nonanal, trans, trans-2,4-octadienal, and 4-hydroxy-2-hexenal increased in a time- and temperature-dependent manner during the roasting process. After roasting at 210 °C for 40 min, their content increased by 1.23, 0.81, 1.44, 0.59, and 2.12 folds compared with the unroasted group, respectively. However, pretreatment with AOB effectively prevented aldehyde formation in roasted scallops by reducing the oxidation of polyunsaturated fatty acids and scavenging free radicals.

Effects of adulterated palm cooking oil on the quality of fried chicken nuggets

Introduction. There is a rising concern over food safety caused by an increasing trend towards adulterating fresh cooking oil with used cooking oil in Malaysia. Recent decades have seen more cases of high-quality edible cooking oil adulteration with reused oil, driven by high market demand and profit margins. In this study, we aimed to analyze the properties of vegetable oils and their effect on the quality of fried chicken nuggets. Study objects and methods. We determined free fatty acid contents and characterized the properties of fresh palm olein, used cooking oil, and adulterated oil. We also compared the sensory quality attributes of chicken nuggets fried in fresh and adulterated oils. Results and discussion. The content of free fatty acids consistently increased with rising adulteration levels. The FTIR spectral analyses revealed significant differences between fresh, used, and adulterated oils at 3006, 2922, 2853, 2680, 1744, 1654, 987, 968, and 722 cm–1. The oil samples with high adulterant concentrations demonstrated a linear increasing trend in K232 and K 270 values, where higher absorbance values indicated severe deterioration in the oil quality. The sensory evaluation showed no significant effect (P > 0.05) of adulteration with used cooking oil on the quality of fried chicken nuggets. Conclusion. Our findings filled in a gap in the previous studies which only focused on the effects of adulteration on the oil properties. The study also provides valuable information to regulatory authorities on the reliability of quality parameters and modern instruments in edible oil adulteration detection.

Heating effect on quality characteristics of mixed canola cooking oils

Background

The subcontinent is famous for its variety of seasonal foods cooked in vegetable seed cooking oils at elevated heating. Oils are often of poor quality that effect to consumer health. The work, therefore, planned to examine the effects of heat on the quality of mixed canola cooking oils (MCCOs). MCCOs were analyzed by preparing volatile fatty acid methyl esters (FAMEs) and for physiochemical properties.

Results

A major change was observed in the FAs composition of various MCCOs as coded K-1 to K-5. MCCOs were found rich in unsaturated 9-octadecanoic acid (oleic acid C_18:1) and 9, 12-octadecadienoic acid (linoleic acid C_18:2) along saturated octadecanoic acid (stearic acid C_18:0). Results reveals that canola oil samples are mixed in the range of 4–30% with other vegetable oils and animal fats. The quality of canola cooking oils further reduced after heating to 100 °C, 200 °C and 350 °C, respectively. Quality parameters of MCCOs were significantly altered after heating and found as color (510–520 nm to 570–600 nm), mass 220–237 g to 210–225 g, volume 250 mL to 239 mL, pH (6.76–6.89), specific gravity (0.87–0.92), refractive index (1.471–1.475), saponification value (SV) (0.7–2.5), un-saponifiable matter (2.4–9.8%) and acid value (AV) (1.20–5.0 mg KOH).

Conclusion

Heating of oils at elevated temperature have shown a significant effect on pH, specific gravity and un-saponifiable matter (p-value < 0.05). Large changes in the physicochemical parameters and FAs composition help to develop a conclusion that cooking at high temperatures affects the quality of mixed canola cooking oils.

Supplementary Information

The online version contains supplementary material available at 10.1186/s13065-022-00796-z.

Primary emissions and secondary production of organic aerosols from heated animal fats

Cooking is an important source of primary organic aerosol (POA) in urban areas, and it may also generate abundant non-methane organic gases (NMOGs), which form oxidized organic aerosol (OOA) after atmospheric oxidation. Edible fats play an important role in a balanced diet and are part of various types of cooking. We conducted laboratory studies to examine the primary emissions of POA and NMOGs and OOA formation using an oxidation flow reactor (OFR) for three animal fats (i.e., lard, beef and chicken fats) heated at two different temperatures (160 and 180 °C). Positive matrix factorization (PMF) revealed that OOA formed together with POA loss after photochemical aging, suggesting the conversion of some POA to OOA. The maximum OOA production rates (PRs) from heated animal fats, occurring under OH exposures (OHexp) of 8.3-15 × 10¹⁰ molecules cm^-3 s, ranged from 8.9 to 24.7 μg min^-1, 1.6-14.5 times as high as initial POA emission rates (ERs). NMOG emissions from heated animal fats were dominated by aldehydes, which contributed 14-71% of the observed OOA. We estimated that cooking-related OOA could contribute to as high as ~10% of total organic aerosol (OA) in an urban area in Hong Kong, where cooking OA (COA) dominated the POA. This study provides insights into the potential contribution of cooking to urban OOA, which might be especially pronounced when cooking contributions dominate the primary emissions.