Different molecular weights chitosan coatings delay the senescence of postharvest nectarine fruit in relation to changes of redox state and respiratory pathway metabolism

Integration of volatile and nonvolatile metabolite profiles, and PPO activity reveals the methyl jasmonate protective advantage and metabolite characteristics of Houttuynia cordata during storage

Houttuynia cordata (H. cordata) is a commonly consumed fresh food. However, it is prone to rapid decay after harvesting. The current storage methods possess their own drawbacks. Consequently, this study aimed to investigate a novel type of protectant Methyl jasmonate (MeJA), to explore its effect on the postharvest quality and metabolic changes of H. cordata. The results indicated that MeJA treatment reduced weight loss, decay, malondialdehyde content and oxidase activity while maintaining antioxidant properties. Utilizing untargeted metabolomics, eleven differential phenolic compounds and six volatile components were identified. Correlation analysis revealed that polyphenol oxidase (PPO) was the main enzyme responsible for the decay. Four phenolic compounds, including phloretin, were the substrates that caused the rot. Additionally, 1-Hepten-3-one could be used as a flavor component for evaluating the freshness of H. cordata. In conclusion, MeJA treatment presents a potential approach for maintaining the quality of H. cordata.

Enhancing fruit preservation with sodium alginate films incorporating propolis extract and graphene oxide

In this work, sodium alginate (SA) composite films containing propolis extract (PRO) and graphene oxide (GO) were developed. Subsequently, the effects of PRO and GO on different properties of SA composite films were studied, and the films were characterized by scanning electron microscopy, fourier transform infrared spectroscopy, X-ray diffraction, and thermogravimetric analysis. The PRO release properties and fruit preservation performance of the developed composite films were also investigated. The results showed that the incorporation of PRO resulted in a 51.16% increase in tensile strength. The simultaneous incorporation of PRO and GO reduced water vapor permeability (WVP) by 22.56% compared to the SA film. The temperatures at which the SA/GO/PRO film lost 5% of its weight were 8.0°C higher than those of the SA film. The incorporation of GO into the SA/PRO composite film also modulates the release of PRO. Furthermore, the incorporation of PRO and GO improved the tensile strength of the SA film, as reflected in the microstructure of the films. The reduced WVP of the SA composite film allowed the packaged blueberries to exhibit less weight loss and shrinkage, thereby prolonging their shelf life.

Improving sugar and respiratory metabolism in pear wounds by postharvest dipping with chitosan and chitooligosaccharide

Chitosan (CTS) and its degradation product, chitooligosaccharide (COS), promote fruit healing by activating phenylpropanoid metabolism. This study investigates their effects on sucrose metabolism in pear wounds. CTS and COS were found to activate neutral invertase, acid invertase, sucrose synthase, and sucrose phosphate synthase, increasing sucrose, glucose, and fructose levels in fruit wounds. They also enhanced sorbitol dehydrogenase activity and promoted sorbitol accumulation. In addition, CTS and COS improved the activities of hexokinase, phosphofructokinase, and pyruvate kinase, increasing phosphoenolpyruvate and ATP production. They activated glucose-6-phosphate dehydrogenase and increased erythrose-4-phosphate, NADPH, and shikimic acid levels. In conclusion, CTS and COS support the formation of the healing closing layer by supplying carbon skeletons, energy, and reducing power through the activation of sugar and respiratory metabolism during the healing process. Compared to CTS, COS was superior in activating the above metabolisms, which is expected to be widely used as a chitin product in postharvest fruit and vegetable preservation and provide new insights into preserving pear freshness.

Stable Pickering emulsions of cinnamaldehyde were formulated using tannic acid-assisted cellulose nanofibers and applied for mango preservation

Recent explorations into cinnamaldehyde (CIN) have identified its potential as a natural preservative, particularly when incorporated into active packaging to enhance the shelf-life of fruits and vegetables. This study explores the use of cellulose nanofiber (CNF)-stabilized Pickering emulsions as a novel delivery system for essential oils, demonstrating broad applicability in food preservation strategies. We employ CNF as Pickering stabilizers to effectively emulsify and encapsulate CIN, investigating the influence of tannic acid (TA) concentrations on the stability of these emulsions. Results reveal that a TA concentration of 0.05 % significantly improves emulsion stability against centrifugation, freeze-thaw cycles, and thermal stresses. This enhanced stability is attributed to hydrogen bonding between TA and CNF, which fosters a uniform and robust network structure. Moreover, the incorporation of TA markedly boosts both the antioxidant properties and the bacteriostatic effectiveness of the CIN Pickering emulsion. Notably, DPPH radical scavenging efficacy escalated from 31.96 % to 93.82 %, and ABTS radical scavenging increased from 22.0 % to 86.31 %. We developed a functional coating by integrating carboxymethyl chitosan (CMCS) with the CIN Pickering emulsions. Application of this coating on mangoes under ambient conditions proved effective in minimizing weight loss, retarding senescence, inhibiting enzymatic activities, and consequently extending the fruit's shelf life.

Caffeic acid enhances the postharvest quality by maintaining the nutritional features and improving the aroma volatiles for nectarine fruit

Maintaining the quality of postharvest nectarine fruit is considerably challenging owing to their vigorous metabolism processes. This study explored the effectiveness of the natural preservative caffeic acid in extending the shelf-life and improving the flavor quality of nectarine. The decay rate of caffeic acid-treated fruit was only 40.00 % but 73.33 % in control group at the end of storage. Other results showed that caffeic acid inhibited fruit quality deterioration, reflected in weight loss, peel color, pulp softening, respiration rate, malondialdehyde accumulation and ethylene biosynthesis. Findings might be attributed to increased levels of antioxidant compounds, such as ascorbic acid, simple phenols and flavonoids, which maintained high antioxidant capacity and metal reducing power of fruit cells. Notably, the content of phenolics was maintained at 241.11 mg kg-1 in caffeic acid-treated fruit by 8 d, which was only 138.21 mg kg-1 in control. Importantly, nectarine treated with caffeic acid possessed a suitable sugar-to-acid ratio, imparting the fruit with an excellent taste. Additionally, caffeic acid facilitated the effective release of esters and lactones, especially γ- and δ-decalactone with fruity aroma, and prevented green aroma and alcoholic off-flavor. The level of lactones in caffeic acid-treated fruit reached 126.76 μg kg-1 during mid-storage, giving the fruit an attractive flavor quality, while was only 50.61 μg kg-1 in control. Overall, caffeic acid exhibited the potential to preserve the quality of nectarine, ensuring both nutritional and edible value for fruit.

Hydrogen sulfide attenuates chilling injury in loquat fruit by alleviating oxidative stress and maintaining cell membrane integrity

The effects of hydrogen sulfide (H2S) on chilling injury (CI), reactive oxygen species (ROS) metabolism, sugar metabolism, pentose phosphate pathway (PPP), and membrane lipid metabolism in loquat fruit throughout the refrigerated period were investigated in this study. The findings indicated that H2S application restrained the increase in internal browning (IB), malondialdehyde (MDA) content, and electrolyte leakage, while sustaining higher total phenolic and total flavonoid levels, and lower soluble quinone content in loquat fruit. Besides, H2S promoted antioxidant accumulation and increased antioxidant enzyme activities by the regulation of ROS metabolism, along with increasing fructose and glucose levels and reducing power by activating sugar metabolism and PPP. Furthermore, H2S treatment retarded the degradation of phospholipids and fatty acids in loquat fruit by modulating membrane lipid metabolism relevant enzyme activities. These findings indicated that H2S application mitigated CI in loquat fruit by alleviating oxidative stress and maintaining cell membrane structural integrity.

Calcium alginate-encapsulated propolis microcapsules: Optimization, characterization, and preservation effects on postharvest sweet cherry

The increasing consumption of fresh fruits and vegetables has led to the development of eco-friendly and active preservation materials which have slow-release effect of antioxidant/antifungal agents. The propolis microcapsules (PM), utilizing calcium alginate as the wall material, incorporating ethanolic extract of propolis (EEP) as the core material, were prepared by ionic gelation method and conducted a investigation of its characteristics After optimization by single factor experiment and theoretical response models, PM which was prepared by dropping 9.3 g L-1 100 mL sodium alginate solution containing 9.8 mL EEP into 0.22 mol L-1 calcium chloride solution showed an encapsulation efficiency of 69.29±1.12 %. Prepared microcapsules were spherical with a dense surface which protected propolis well from the environment, retained a large number of bio-active compounds and improve thermal stability of propolis. Moreover, the microcapsules exhibited good slow-release effect and good inhibitory influence on the development of Alternaria Alternata growth which the colony diameter of the control was 41.38 % higher than the treatment at day six. With 5.0 g PM placed in the small non-woven bag in the application on sweet cherries with non-direct contact method, the decay rate and weight loss of fruits were reduced by 47.5 % and 17.6 %, concurrently the PM also effectively maintain the good appearance, hardness, antioxidant capacity by slowing the reduction in the content of total phenols, flavonoids and enzymatic activities. Therefore, the PM with superior antioxidant and antifungal capacity have the great potential to design as a practical active materials for fruits preservation.

The dual function of calcium ion in fruit edible coating: Regulating polymer internal crosslinking state and improving fruit postharvest quality

The edible coating is proved to be a convenient approach for fruit preservation. Among these published explorations, naturally sourced macromolecules and green crosslinking strategies gain attention. This work centers on edible coatings containing Ca2+ as crosslinker for the first time, delving into crosslinking mechanisms, include alginate, chitosan, Aloe vera gel, gums, etc. Additionally, the crucial functions of Ca2+ in fruit's quality control are also elaborated in-depth, involving cell wall, calmodulin, antioxidant, etc. Through a comprehensive review, it becomes evident that Ca2+ plays a dual role in fruit edible coating. Specifically, Ca2+ constructs a three-dimensional dense network structure with polymers through ionic bonding. Moreover, Ca2+ acts directly with cell wall to maintain fruit firmness and serve as a second messenger to participate secondary physiological metabolism. In brief, coatings containing Ca2+ present remarkable effects in preserving fruit and this work may provide guidance for Ca2+ related fruit preservation coatings.

Fucoidan-based coatings extend the shelf-life of nectarines

This research investigated the efficacy of fucoidan-based coatings in preserving nectarine fruits at room temperature. The present study compared the preservation effects of different fucoidan concentrations (1%, 3%, 5%) with distilled water serving as a control (0%). The findings revealed that the addition of fucoidan dose-dependently improved the room temperature preservation quality of the nectarines. Notably, a 5% fucoidan concentration markedly delays the onset of the respiratory peak in nectarines. On day 14 of storage, the plants were subsequently cultured on a 5% fucoidan coating (F5), which exhibited a weight loss rate of 5.87%, a spoilage rate of 18.33%, a hardness of 3.87 kg/cm², a soluble solid content of 11.47%, a titratable acid content of 0.29% and an ascorbic acid content of 2.58%. The overall acceptability score was 7.83. These results demonstrated that coating with fucoidan is an effective method for the preservation of nectarines.

Recent advances and potential applications for metal-organic framework (MOFs) and MOFs-derived materials: Characterizations and antimicrobial activities

Microbial infections, particularly those caused by antibiotic-resistant pathogens, pose a critical global health threat. Metal-Organic Frameworks (MOFs), porous crystalline structures built from metal ions and organic linkers, initially developed for gas adsorption, have emerged as promising alternatives to traditional antibiotics. This review, covering research up to 2023, explores the potential of MOFs and MOF-based materials as broad-spectrum antimicrobial agents against bacteria, viruses, fungi, and even parasites. It delves into the historical context of antimicrobial agents, recent advancements in MOF research, and the diverse synthesis techniques employed for their production. Furthermore, the review comprehensively analyzes the mechanisms of action by which MOFs combat various microbial threats. By highlighting the vast potential of MOFs, their diverse synthesis methods, and their effectiveness against various pathogens, this study underscores their potential as a novel solution to the growing challenge of antibiotic resistance.

Polysaccharide-Based Edible Biopolymer-Based Coatings for Fruit Preservation: A Review

Over the last decades, a significant rise in fruit consumption has been noticed as they contain numerous nutritional components, which has led to the rise in fruit production globally. However, fruits are highly liable to spoilage in nature and remain vulnerable to losses during the storage and preservation stages. Therefore, it is crucial to enhance the storage life and safeness of fruits for the consumers. To keep up the grade and prolong storage duration, various techniques are employed in the food sector. Among these, biopolymer coatings have gained widespread acceptance due to their improved characteristics and ideal substitution for synthetic polymer coatings. As there is concern regarding the safety of the consumers and sustainability, edible coatings have become a selective substitution for nurturing fruit quality and preventing decay. The application of polysaccharide-based edible coatings offers a versatile solution to prevent the passage of moisture, gases, and pathogens, which are considered major threats to fruit deterioration. Different polysaccharide substances such as chitin, pectin, carrageenan, cellulose, starch, etc., are extensively used for preparing edible coatings for a wide array of fruits. The implementation of coatings provides better preservation of the fruits such as mango, strawberry, pineapple, apple, etc. Furthermore, the inclusion of functional ingredients, including polyphenols, natural antioxidants, antimicrobials, and bio-nanomaterials, into the edible coating solution matrix adds to the nutritional, functional, and sensory attributes of the fruits. The blending of essential oil and active agents in polysaccharide-based coatings prevents the growth of food-borne pathogens and enhances the storage life of the pineapple, also improving the preservation of strawberries and mangoes. This paper aims to provide collective data regarding the utilization of polysaccharide-based edible coatings concerning their characteristics and advancements for fruit preservation.

Development of a zebrafish model for toxicity evaluation of adulterated Apis mellifera honey

Since ancient times, honey has been used for medical purposes and the treatment of various disorders. As a high-quality food product, the honey industry is prone to fraud and adulteration. Moreover, limited experimental studies have investigated the impact of adulterated honey consumption using zebrafish as the animal model. The aims of this study were: (1) to calculate the lethal concentration (LC50) of acid-adulterated Apis mellifera honey on embryos, (2) to investigate the effect of pure and acid-adulterated A. mellifera honey on hatching rate (%) and heart rate of zebrafish (embryos and larvae), (3) to elucidate toxicology of selected adulterated honey based on lethal dose (LD50) using adult zebrafish and (4) to screen the metabolites profile of adulterated honey from blood serum of adult zebrafish. The result indicated the LC50 of 31.10 ± 1.63 (mg/ml) for pure A. mellifera honey, while acetic acid demonstrates the lowest LC50 (4.98 ± 0.06 mg/ml) among acid adulterants with the highest mortality rate at 96 hpf. The treatment of zebrafish embryos with adulterated A. mellifera honey significantly (p ≤ 0.05) increased the hatching rate (%) and decreased the heartbeat rate. Acute, prolong-acute, and sub-acute toxicology tests on adult zebrafish were conducted at a concentration of 7% w/w of acid adulterants. Furthermore, the blood serum metabolite profile of adulterated-honey-treated zebrafish was screened by LC-MS/MS analysis and three endogenous metabolites have been revealed: (1) Xanthotoxol or 8-Hydroxypsoralen, (2) 16-Oxoandrostenediol, and (3) 3,5-Dicaffeoyl-4-succinoylquinic acid. These results prove that employed honey adulterants cause mortality that contributes to higher toxicity. Moreover, this study introduces the zebrafish toxicity test as a new promising standard technique for the potential toxicity assessment of acid-adulterated honey in this study and hazardous food adulterants for future studies.

Preparation of Fresh-Keeping Paper Using Clove Essential Oil through Pickering Emulsion and Maintaining the Quality of Postharvest Cherry Tomatoes

This study focused on developing a Pickering emulsion fresh-keeping paper that contained clove essential oil (CEO). Cherry tomatoes served as the test material for assessing the preservative efficacy of fresh-keeping paper. The results showed that Pickering emulsion had strong stability. Additionally, the fresh-keeping paper had a good antioxidant activity and sustained-release effect on CEO. In terms of the preservation effect, 0.75 wt% CEO Pickering emulsion paper reduced the decay incidence and weight loss of cherry tomatoes during 12-day storage. Fresh-keeping paper could also play a positive role in protecting the sensory index and color difference of tomatoes. It slowed the decline rate of soluble solid concentration (SSC) and titrable acid (TA). The vitamin C (Vc) and hardness of preserved tomatoes using fresh-keeping paper were maintained at a high level. The paper also inhibited the growth of microorganisms significantly. Therefore, 0.75 wt% CEO Pickering emulsion fresh-keeping paper displayed considerable potential for application in the preservation of postharvest fruits and vegetables. It is a novel fruit and vegetable preservation material worthy of development.

Development of starch-based films reinforced with curcumin-loaded nanocomplexes: Characterization and application in the preservation of blueberries

In current study, curcumin-loaded bioactive nanocomplexes (Cur NCs) (2 %, 5 %, 8 %, and 11 %) were used to prepare corn starch (CS)-based composite films (CS-Cur NCs). Fourier-transform infrared spectroscopy, X-ray diffraction and scanning electron microscopy revealed that Cur NCs were uniformly dispersed in the polymer matrix via physical interaction. Moreover, the mechanical, gas barrier, hydrophobicity, optical, and thermal properties and the antioxidant activity of composite films were potentially improved with the addition of Cur NCs. Subsequently, CS-based film with 11 % Cur NCs exhibited high antioxidant activity (the scavenging rates of DPPH and ABTS are 50.07 % ± 0.82 % and 65.26 % ± 1.60 %, respectively) and was used for packaging blueberries. Compared with the control, the CS-Cur NCs packaging treatment effectively improved the appearance and nutrition of blueberries, and maintained the high activity of several antioxidant enzymes. Furthermore, CS-Cur NCs packaging treatment significantly improved the ascorbic acid (AsA) and glutathione (GSH) levels, thus regulating the AsA-GSH cycle system and suppressing the accumulation of reactive oxygen species (ROS). In summary, the CS-Cur NCs packaging could effectively conserve the postharvest quality of blueberries by improving antioxidant enzyme activity and suppressing excessive accumulation of ROS, which contributes to the development of bioactive packaging and provides novel insights into the preservation of blueberries. This work demonstrates that the development of active packaging is promising to absorb the oxidative radicals from food, and protect the food from inherent and external factors, thus enhancing the quality, security, and shelf-life of the food during storage.

Improved sustained-release properties of ginger essential oil in a Pickering emulsion system incorporated in sodium alginate film and delayed postharvest senescence of mango fruits

The insufficient water vapor barrier and mechanical capacity of sodium alginate (SA) film limited its application in fruit preservation. Herein, cellulose nanocrystals (CNCs) were used to stabilize Pickering emulsion. Then, we prepared SA composite films. Ginger essential oil (GEO) was loaded as antimicrobials and antioxidants. Finally, the application on mangos were investigated. Compared to coarse emulsion, Pickering emulsion and its film-formation-solution showed more stable system and larger droplet size. The emulsion significantly changed the properties of SA film. Specifically, CNCs improved the thermal, tensile, and barrier properties of the film and GEO enhanced the ultraviolet-visible light barrier capacity. Additionally, the SA/CNC film possessed a homogeneous micromorphology which had a sustained-release effect on GEO, thus maintaining high postharvest quality and long-term bioavailability for mangos. In conclusion, the film prepared via Pickering emulsion showed satisfactory properties which had great potential in fruit preservation.

Enhancing Postharvest Quality and Antioxidant Capacity of Blue Honeysuckle cv. 'Lanjingling' with Chitosan and Aloe vera Gel Edible Coatings during Storage

This study investigated the impact of chitosan (CH, 1%) and aloe vera gel (AL, 30%) edible coatings on the preservation of blue honeysuckle quality during a 28-day storage at -1 °C. Coating with CH, AL, and CH+AL led to notable enhancements in several key attributes. These included increased firmness, total soluble solids, acidity, pH, and antioxidant capacity (measured through DPPH, ABTS, and FRAP assays), as well as the preservation of primary (ascorbic acid) and secondary metabolites (TPC, TAC, and TFC). The TAC and TFC levels were approximately increased by 280% and 17%, respectively, in coated blue honeysuckle after 28 d compared to uncoated blue honeysuckle. These coatings also resulted in reduced weight loss, respiration rate, color, abscisic acid, ethylene production, and malondialdehyde content. Notably, the CH+AL treatment excelled in preserving secondary metabolites and elevating FRAP-reducing power, demonstrating a remarkable 1.43-fold increase compared to the control after 28 days. Overall, CH+AL exhibited superior effects compared to CH or AL treatment alone, offering a promising strategy for extending the shelf life and preserving the quality of blue honeysuckle during storage.

Advancements in coating technologies: Unveiling the potential of chitosan for the preservation of fruits and vegetables

Post-harvest losses of fruits and vegetables pose a significant challenge to the agriculture industry worldwide. To address this issue, researchers have turned to natural and eco-friendly solutions such as chitosan coatings. Chitosan, a biopolymer derived from chitin, has gained considerable attention due to its unique properties such as non-toxicity, biodegradability, biocompatibility and potential applications in post-harvest preservation. This review article provides an in-depth analysis of the current state of research on chitosan coatings for the preservation of fruits and vegetables. Moreover, it highlights the advantages of using chitosan coatings, including its antimicrobial, antifungal, and antioxidant properties, as well as its ability to enhance shelf-life and maintain the quality attributes of fresh product. Furthermore, the review discusses the mechanisms by which chitosan interacts with fruits and vegetables, elucidating its antimicrobial activity, modified gas permeability, enhanced physical barrier and induction of host defense responses. It also examines the factors influencing the effectiveness of chitosan coatings, such as concentration, molecular weight, deacetylation degree, pH, temperature, and application methods.

Natural food preservation with ginger essential oil: Biological properties and delivery systems

Recently, the increasing demand from consumers for preservative-free or naturally preserved foods has forced the food industry to turn to natural herbal and plant-derived preservatives rather than synthetic preservatives to produce safe foods. Essential oils derived from ginger (Zingiber officinale Roscoe) are widely known for their putative health-promoting bioactivities, and this paper covers their extraction methods, chemical composition, and antibacterial and antioxidant activities. Especially, the paper reviews their potential applications in food preservation, including nanoemulsions, emulsions, solid particle encapsulation, and biodegradable food packaging films/coatings. The conclusion drawn is that ginger essential oil can be used not only for direct food preservation but also encapsulated using various delivery forms such as nanoemulsions, Pickering emulsions, and solid particle encapsulation to improve its release control ability. The film of encapsulated ginger essential oil has been proven to be superior to traditional methods in preserving foods such as bread, meat, fish, and fruit.

Edible coatings and films for shelf-life extension of fruit and vegetables

The execution of the edible coatings and films for food preservation; vegetables, fruits, meat, and dry fruits has been ladened in history. The study of literature portrays enough pieces of evidence dating back from centuries of coatings or films being utilized for the conservation of numerous fruits and vegetables to stretch their average shelf-life. The mechanism that remains operative in extending the shelf-life of fruits and vegetables beyond the normal shelf-life is the controlled entry and exit of moisture and gases. The non- biodegradable packaging which is also non-sustainable can be substituted with compostable and edible coatings and films made up of natural biopolymers. Therefore, keeping in mind the environment and consumer safety, a score of research has been going on from former decades for the development of edible coatings and films with efficient shelf life-extending qualities. The films composed of proteins exhibit a good mechanical strength while the polysaccharide composed films and coatings show efficient gas blocking qualities, however, both lack moisture shielding attributes. These shortcomings can be fixed by combining them with lipids and or some appropriate hydrocolloids. The edible coatings and films have been integrated with various food products; however, they haven't been completely successful in substitution of the total fraction of their non-edible counterparts. The implementation of edible coatings and films have shown to serve an immense value in extending the shelf-life of fruits and vegetables along with being a sustainable and eco-friendly approach for food packaging.

Tannic Acid and Ca2+ Double-Crosslinked Alginate Films for Passion Fruit Preservation

In this study, the interaction of different concentrations of tannic acid (TA) (10%, 20%, and 30% w/w) and Ca2+ with alginate (SA) was utilized to create double-crosslinked SA films. The resulting films were evaluated for their optical, mechanical, water resistance, and barrier properties, and their microstructure and intermolecular interactions were also characterized. The SA films containing 20% TA showed the best mechanical properties, with an observed increase in tensile strength of 22.54%. In terms of water vapor permeability, the SA film containing 30% TA exhibited the highest barrier property, which was 25.36% higher than that of the pure SA film. Moreover, TA demonstrated a strong UV absorption ability, resulting in a nearly 0% UV transmittance of the SA film at 280 nm. It can be seen that SA films containing 20% TA have excellent barrier and mechanical properties, and the development of such films will be applied to the storage and packaging of fresh food. It is worth noting that this work also investigated the effect of SA coatings containing different concentrations of TA on the preservation of passion fruits for 7 days. The results revealed that passion fruits treated with SA coatings containing a 30% TA concentration maintained a better appearance on the 7th day and had the lowest weight loss and crumpling indices of approximately 8.98% and 2.17, respectively, compared to the other treatment groups. Therefore, based on the overall results, the addition of 30% TA to SA coatings proved to be more effective and can be considered a promising approach for delaying fruit senescence and decay.

Synergistic Effects of 1-MCP Fumigation and ε-Poly-L-Lysine Treatments on Delaying Softening and Enhancing Disease Resistance of Flat Peach Fruit

Flat peach, a predominant fruit consumed in China, is highly susceptible to softening and perishable. The impact of 1-methylcycloproene (1-MCP) fumigation combined with ε-poly-L-lysine (ε-PL) on softening and postharvest reactive oxygen species (ROS) and phenylpropanoid pathway metabolisms in peaches and its relationship to disease resistance were investigated. Findings revealed that a combination of 1 µL L-1 1-MCP and 300 mg L-1 ε-PL effectively suppressed the activity of cell-wall-degrading enzymes and the disassembly of cell wall structure, thus maintaining higher firmness and lower decay incidence. Compared to the control group, the synergistic approach bolstered enzymatic responses linked to disease resistance and ROS-scavenge system, consistently preserving total phenolics, flavonoids, ascorbic acid, and glutathione levels. Concurrently, the accumulation of hydrogen peroxide and malondialdehyde was significantly diminished post-treatment. These results show that there is good synergistic effect between 1-MCP and ε-PL, which could effectively maintain the quality of flat peach fruit by modulating cell wall metabolism and enhancing the resistance.

Application of Tannic Acid and Fe3+ Crosslinking-Enhanced Pectin Films for Passion Fruit Preservation

In this work, the role of tannic acid (TA) and Fe3+ in crosslinking pectin (PE) to enhance its physicochemical properties was investigated. Specifically, PE/TA/Fe3+ composite films were prepared using the solution casting method, and the UV-blocking properties, transparency, water content, physico-mechanical properties, antioxidant properties and degradability of the PE composite films were investigated. The microstructure of the PE composite films and the interactions between the contained components were analyzed using FTIR, X_crystal diffraction and SEM scanning electron microscopy. The results showed that the addition of TA and Fe3+ can significantly improve the UV barrier properties and antioxidant properties of PE films. Meanwhile, Fe3+ could form a metal phenol network with TA and crosslink with the PE film, which makes the structure of the PE film denser and thus significantly reduces the water vapor permeability of the PE film. In addition, this work also indicated that the PE composite coatings have a favorable preservation effect on passion fruit, which leads to the lowest weight loss rate and wrinkle index of the passion fruit within 7 days of storage and shows good appearance quality and commercial value. This work indicates that the addition of tannic acid and Fe3+ significantly improved the mechanical and barrier properties of pectin films, and the composite pectin coating extended the shelf life of passion fruit.

Chitosan-grafted phenolic acids as an efficient biopolymer for food packaging films/coatings

Chitosan (CS), a bio-renewable natural material, has the potential to be utilized as a biopolymer for food packaging films (PFs)/coatings. However, its low solubility in dilute acid solutions and poor antioxidant and antimicrobial activities limit its application in PFs/coatings. To address these restrictions, chemical modification of CS has garnered increasing interest, with graft copolymerization being the most extensively used method. Phenolic acids (PAs) as natural small molecules are used as excellent candidates for CS grafting. This work focuses on the progress of CS grafted PA (CS-g-PA) based films, introducing the chemistry and methods of preparing CS-g-PA, particularly the effects of different PAs grafting on the properties of CS films. In addition, this work discusses the application of different CS-g-PA functionalized PFs/coatings for food preservation. It is concluded that the food preservation capability of CS-based films/coatings can be improved by modifying the properties of CS-based films through PA grafting.

The combination treatment of chlorogenic acid and sodium alginate coating could accelerate the wound healing of pear fruit by promoting the metabolic pathway of phenylpropane

Water loss and microbial infection induced by mechanical injury are the main sources of harvested loss of fruits and vegetables. Plenty studies have shown that regulating phenylpropane-related metabolic pathways can effectively accelerate wound healing. The combination treatment of chlorogenic acid and sodium alginate coating on postharvest wound healing of pear fruit were investigated in this work. The result shows combination treatment reduced weight loss and disease index of the pears, enhanced texture of healing tissues, maintained the integrity of cell membrane system. Moreover, chlorogenic acid increased the content of total phenols and flavonoids, and ultimately leads to the accumulation of suberin poly phenolic (SPP) and lignin around wound cell wall. Activities of phenylalanine metabolism-related enzymes (PAL, C4H, 4CL, CAD, POD and PPO) in wound-healing tissue were enhanced. The contents of major substrates such as trans-cinnamic, p-coumaric, caffeic, and ferulic acids also increased. The presented results suggested that the combination treatment of chlorogenic acid and sodium alginate coating stimulated wound healing in pears by elevating the phenylpropanoid metabolism pathway, so that maintain high postharvest fruit quality.

Chitosan and chitooligosaccharide regulated reactive oxygen species homeostasis at wounds of pear fruit during healing

Both chitosan (CTS) and chitooligosaccharide (COS) can promote fruit healing. However, whether the two chemicals regulate reactive oxygen species (ROS) homeostasis during wound healing of pear fruit remains unknown. In this study, the wounded pear fruit (Pyrus bretschneideri cv. Dongguo) was treated with a 1 g L^-1 CTS and COS. We found CTS and COS treatments increased NADPH oxidase and superoxide dismutase activities, and promoted O₂^.- and H₂O₂ production at wounds. CTS and COS also enhanced the activities of catalase, peroxidase, ascorbate peroxidase, monodehydroascorbate reductase, dehydroascorbate reductase, and glutathione reductase, and elevated the levels of ascorbic acid and glutathione. In addition, the two chemicals improved antioxidant capacity in vitro and maintained cell membrane integrity at fruit wounds during healing. Taken together, CTS and COS can regulate ROS homeostasis at wounds of pear fruit during healing by scavenging excessive H₂O₂ and improving antioxidant capacity. Overall, the COS demonstrated superior performance over the CTS.

A comprehensive review of intelligent packaging for fruits and vegetables: Target responders, classification, applications, and future challenges

Post-harvest fruits and vegetables are extremely susceptible to dramatic and accelerated quality deterioration deriving from their metabolism and adverse environmental influences. Given their vigorous physiological metabolism, monitoring means are lacking due to the extent that unnecessary waste and damage are caused. Numerous intelligent packaging studies have been hitherto carried out to investigate their potential for fruit and vegetable quality monitoring. This state-of-the-art overview begins with recent advances in target metabolites for intelligent packaging of fruits and vegetables. Subsequently, the mechanisms of action between metabolites and packaging materials are presented. In particular, the exact categorization and function of intelligent packaging of fruits and vegetables, are all extensively and comprehensively described. In addition, for the sake of further research in this field, the obstacles that impede the scaling up and commercialization of intelligent packaging for fruits and vegetables are also explored, to present valuable references.

High performance biopolymeric packaging films containing zinc oxide nanoparticles for fresh food preservation: A review

Biodegradable food packaging films (FPFs) assembled from sustainable biopolymeric materials are of increasing interest to the food industry due to pollution and health risks resulting from the use of conventional plastic packaging. However, the functional performance of these FPFs is often poorer than that of plastic films, which limits their commercial application. This problem may be partly overcome by incorporating nano-additives like zinc oxide nanoparticles (ZNPs) into the films. The incorporation of ZNPs into FPFs can improve their functional performance. The properties of these films depends on the concentration, dispersion state, and interactions of ZNPs with the biopolymeric matrix in the films. ZNPs-loaded films and coatings are highly effective at preserving a variety of fresh foods. Studies of ZNPs migration through FPFs have shown that the zinc is mainly transported in an ionic form and the amount entering foods is below safety standards. This article reviews recent developments in the design, fabrication, and application of ZNPs-loaded FPFs based on biopolymers, focusing on the impacts of ZNPs on the optical, barrier, mechanical, water sensitivity, and antimicrobial properties of the films. The potential applications of ZNPs-loaded FPFs for fresh food preservation is also discussed.

Cross-linked biopolymeric films by citric acid for food packaging and preservation

There is a growing interest in the development of degradable and biopolymeric food packaging films (BFPFs) based on green ingredients and strategies due to their biocompatibility, sustainability, and renewable nature of bio-materials. The performance of BFPFs can be improved either by modifying the biopolymer molecules or by combining them with various additives, including nanomaterials, cross-linkers, bioactive compounds and other polymers. Among them, green cross-linking technology is considered as an effective method to improve the performance of BFPFs; citric acid (CA) is widely used as a natural green cross-linker in different BFPFs. In this study, after an overview on CA chemistry, different types of BFPFs cross-linked by CA have been discussed. In addition, this work summarizes the application of CA cross-linked BFPFs/coatings for food preservation in recent years. The role of CA as a cross-linking agent differs in various types of biopolymers, i.e. polysaccharide-based, protein-based and biopolyester-based biopolymers. Moreover, the cross-linking of CA with different biopolymer molecules is mainly related to the CA content and reaction state; the cross-linking process is significantly influenced by conditions such as temperature and pH. In conclusion, this work shows that CA as a natural green cross-linking agent could improve the performance of different BFPFs and enhance their food preservation capacity.

Control Efficacy of Salicylic Acid Microcapsules against Postharvest Blue Mold in Apple Fruit

Salicylic acid (SA) is a natural inducer of disease resistance in fruit, but its application in the food industry is limited due to low water solubility. Here, SA was encapsulated in β-cyclodextrin (β-CD) via the host-guest inclusion complexation method, and the efficacy of SA microcapsules (SAM) against blue mold caused by Penicillium expansum in postharvest apple fruit was elucidated. It was observed that SAM was the most effective in inhibiting the mycelial growth of P. expansum in vitro. SAM was also superior to SA for control of blue mold under in vivo conditions. Enzyme activity analysis revealed that both SA and SAM enhanced the activities of superoxide dismutase (SOD) and phenylalanine ammonia lyase (PAL) in apple fruit, whereas SAM led to higher SOD activities than SA. Total phenolic contents in the SAM group were higher than those in the SA group at the early stage of storage. SAM also improved fruit quality by retarding firmness loss and maintaining higher total soluble solids (TSS) contents. These findings indicate that microcapsules can serve as a promising formulation to load SA for increasing P. expansum inhibition activity and improving quality attributes in apple fruit.

Preparation and Characterization of Phenolic Acid-Chitosan Derivatives as an Edible Coating for Enhanced Preservation of Saimaiti Apricots

In this study, caffeic acid (CA) and chlorogenic acid (CGA) were incorporated onto chitosan (CS) using free radical grafting initiated by a hydrogen peroxide/ascorbic acid (H₂O₂/Vc) redox system. The structural properties of the CA (CA-g-CS) and CGA (CGA-g-CS) derivatives were characterized by UV-Vis absorption, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), nuclear magnetic resonance (NMR), and thermal stability analysis. Then, the antioxidant and antibacterial properties were evaluated, and the effect of CGA-g-CS on the postharvest quality of Saimaiti apricot was studied. It proved that phenolic acids were successfully grafted onto the CS. The grafting ratios of CA-g-CS and CGA-g-CS were 126.21 mg CAE/g and 148.94 mg CGAE/g. The antioxidation and antibacterial activities of CGA-g-CS were better than those of CA-g-CS. The MICs of CGA-g-CS against E. coli, S. aureus, and B. subtilis were 2, 1, and 2 mg/mL. The inhibitory zones of 20 mg/mL CGA-g-CS against the three bacteria were 19.16 ± 0.35, 16.33 ± 0.91, and 16.24 ± 0.05 mm. The inhibitory effects of 0.5% CGA-g-CS on the firmness, weight loss, SSC, TA, relative conductivity, and respiration rate of the apricot were superior. Our results suggest that CGA-g-CS can be potentially used as an edible coating material to preserve apricots.

Cellulose Nanofibers Extracted From Natural Wood Improve the Postharvest Appearance Quality of Apples

To prolong the shelf life of perishable food with a simple and environmentally friendly postharvest preservation technology is one of the global concerns. This study aimed to explore the application value of biological macromolecule natural cellulose nanofibers (CNFs) in extending the postharvest fruit shelf life. In this study, 0.5% (wt%) CNFs were prepared from natural wood and coated on the surface of early-ripening apple fruits. After 10 days of storage at room temperature, the results revealed that the shelf life of apple fruits with CNF coating was significantly prolonged, and the fruit appearance quality improved. The invisible network structure of CNFs in the fruit epidermis was observed under an atomic force microscope (AFM). The gas chromatography and mass spectrometry (GC-MS) analysis showed that CNFs significantly promoted the formation of epidermal wax, especially fatty alcohols, during storage. In addition, the CNFs remarkably promoted the upregulation of genes related to the synthesis of cuticular wax of apple. In conclusion, this study provides an environmentally sustainable nanomaterial for post-harvest preservation of horticultural products, and also provides a new insight into the effect of CNFs on postharvest storage of apple fruits.

Both chitosan and chitooligosaccharide treatments accelerate wound healing of pear fruit by activating phenylpropanoid metabolism

This study aimed to compare the effects of chitosan (CTS) and chitooligosaccharide (COS) treatments on wound healing of pear fruits and to investigate the related mechanisms during postharvest storage under ambient conditions. The results revealed that CTS and COS treatments reduced the weight loss and disease index of the wounded pears (Pyrus bretschneideri cv. Dongguo), and accelerated suberin polyphenolic and lignin deposition at wounds during 7 d of investigation. Furthermore, CTS and COS elevated the level of the genes expression and activities of key enzymes and increased product contents of phenylpropanoid metabolism. Collectively, these treatments at a concentration of 1 g/L could promote wound healing in pears by activating phenylpropanoid metabolism. Comparatively, COS treatment presented better effects to CTS and could be useful as a preservative method to enhance storability of fresh produce.

Polysaccharide-Based Active Coatings Incorporated with Bioactive Compounds for Reducing Postharvest Losses of Fresh Fruits

This review reports recently published research related to the application of polysaccharide-based biodegradable and edible coatings (BECs) fortified with bioactive compounds obtained from plant essential oils (EOs) and phenolic compounds of plant extracts. Combinations of polysaccharides such as starches, pectin, alginate, cellulose derivatives, and chitosan with active compounds obtained from clove, lemon, cinnamon, lavender, oregano, and peppermint have been documented as potential candidates for biologically active coating materials for retardation of quality changes in fresh fruits. Additionally, polysaccharide-based active coatings supplemented with plant extracts such as cashew leaves, pomegranate peel, red roselle, apple fiber, and green tea extracts rich in phenolic compounds and their derivatives have been reported to be excellent substituents to replace chemically formulated wax coatings. Moreover, EOs and plant polyphenolics including alcohols, aldehydes, ketones phenols, organic acids, terpenes, and esters contain hydroxyl functional groups that contribute bioactivity to BECs against oxidation and reduction of microbial load in fresh fruits. Therefore, BECs enriched with active compounds from EOs and plant extracts minimize physiological and microbial deterioration by reducing moisture loss, softening of flesh, ripening, and decay caused by pathogenic bacterial strains, mold, or yeast rots, respectively. As a result, shelf life of fresh fruits can be extended by employing active polysaccharide coatings supplemented with EOs and plant extracts prior to postharvest storage.

Changes in fruit pigment accumulation, chloroplast development, and transcriptome analysis in the CRISPR/Cas9-mediated knockout of Stay-green 1 (slsgr1) mutant

The green-flesh (gf) mutant of the tomato fruit ripen to a muddy brown color and has been demonstrated previously to be a loss-of-function mutant. Here, we provide more evidence to support this view that SlSGR1 is involved in color change in ripening tomato fruits. Knocking out SlSGR1 expression using a clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated protein 9 genome editing strategy showed obviously a muddy brown color with significantly higher chlorophyll and carotenoid content compared with wild-type (WT) fruits. To further verify the role of SlSGR1 in fruit color change, we performed transcriptome deep sequencing (RNA-seq) analysis, where a total of 354 differentially expressed genes (124/230 downregulated/upregulated) were identified between WT and slsgr1. Additionally, the expression of numerous genes associated with photosynthesis and chloroplast function changed significantly when SlSGR1 was knocked out. Taken together, these results indicate that SlSGR1 is involved in color change in ripening fruit via chlorophyll degradation and carotenoid biosynthesis.

Quality of Physalis peruviana fruits coated with pectin and pectin reinforced with nanocellulose from P. peruviana calyces

Physalis peruviana is marketed without its calyx, which generates byproducts and a decrease in the shelf life of these fruits. The aim of this study was to evaluate the effect of edible pectin-coatings reinforced with nanocellulose from calyx on the physical-chemical and physiological parameters of P. peruviana fruits during refrigerated storage (5 °C) for ten days. The nanocellulose extraction was carried out using a combined extraction method (chemical procedures and ultrasound radiation). The characterization of the fibers showed that the maximum degradation temperatures ranged between 300 and 311 °C. The SEM analysis revealed the presence of fibers after the chemical treatment. The removal of lignin and hemicellulose was validated using Fourier Transform Infra Red (FTIR) spectroscopy. The results showed that the fruits treated with pectin and pectin reinforced with nanocellulose at 0.5 % (w/w) had an adequate visual appearance and showed a minor color change (ΔE of 19.04 and 21.04, respectively) and the highest retention of L∗ during storage. Although the addition of nanocellulose at 0.5% presented the lowest respiratory rate (29.60 mgCO₂/kg h), the treatment with pectin offered the least weight loss and showed the highest firmness retention at the end of storage. Thus, the edible pectin-coating may be useful for improving the postharvest quality and storage life of fresh P. peruviana fruit. Nanocellulose from P. peruviana calyces can be used under the concept of a circular economy; although, its use as a reinforcement of pectin showed some limitations.

Edible coating of chitosan ionically combined with κ-carrageenan maintains the bract and postharvest attributes of dragon fruit (Hylocereus undatus)

Dragon fruit (Hylocereus undatus) has medicinal properties due to its rich antioxidant profile. Dragon fruit also has an attractive appearance of red peel and green bracts. However, shrivelling and weight loss, bract yellowing, and postharvest diseases are major challenges to the dragon fruit trade. The objective of the present work was, therefore, to formulate a coating composed of chitosan and κ-carrageenan for dragon fruits during storage at 10°C. The composite coating based on 1% chitosan (w/v) and 0.2% (w/v) κ-carrageenan with 0.75% (w/v) glycerol as a plasticiser effectively reduced the physiological weight loss and maintained the freshness of the dragon fruits, while increasing the phenolic content and maintaining the titratable acidity in the pulp. The composite coating delayed chlorophyll degradation by suppressing chlorophyllase and chlorophyll-degrading peroxidase, thereby maintaining the chlorophyll content (45.46 mg/100 g dry weight) and freshness of the bracts. However, the composite coating did not possess a strong effect on enhancing chitinase and β-1-3 glucanase activities of dragon fruits during storage and controlling disease symptoms.

Preparation and characterization of chitosan-based edible active films incorporated with Sargassum pallidum polysaccharides by ultrasound treatment

In this study, Sargassum pallidum polysaccharides (SPPs) were incorporated into chitosan (CH) to develop a novel edible active film (CH/SPPs-US) via ultrasonication. The mechanical, water vapor permeability, surface morphology, crystallinity, antioxidant, and fruit preservation properties of CH/SPPs-US films prepared under sequences of matrix ratios and ultrasound treatment were investigated. The results revealed that the addition of SPPs combined with ultrasonic treatment could significantly enhance the transparency, elongation and tensile strength of the films whereas the water vapor permeability was decreased. Tensile strength and elongation at break of the C2/SP1.2-US film were 12.07 N and 54.18%, respectively, which were significantly higher than those for CH film. Meanwhile, the water vapor permeability value of C2/SP1.2-US was reduced by as high as 40.2% compared with that of chitosan film. In addition, antioxidant effect evaluation showed that the CH-based films added with SPPs exhibited better antioxidant activity than CH film, and ultrasonic treatment could further strengthen the antioxidant activity of the film. The CH/SPPs-US films could effectively extend the shelf life and inhibit the deterioration of the strawberry at room temperature (25 ± 1 °C) and 70% ± 5% relative humidity for 7 days. These results indicated that the CH/SPPs edible films via ultrasonication could be developed as edible packaging films for the preservation of fresh fruits.