Multi-residue analysis of 126 pesticides in chicken muscle by ultra-high-performance liquid chromatography coupled to quadrupole time-of-flight mass spectrometry

A green extraction method based on aqueous two-phase system for trace-level enrichment of multi-residue pesticides in traditional Chinese medicine prior to HPLC-MS/MS quantitative analysis

At present, the matrix interference in traditional Chinese medicine (TCM) is still a great challenge for multi-residue pesticides analysis. Herein, an alcohol/salt aqueous two-phase system (ATPS) based on n-propanol and (NH4)2SO4 was developed by comparing the binodal curve phase diagrams and the extraction rates of pesticides. The specific extraction conditions, including the composition of the ATPS, temperature, pH, and extraction time were explored through single factor experiments, and subsequently optimized using orthogonal array design and response surface methodology. The optimal conditions for the (NH4)2SO4/n-propanol ATPS extraction were determined to be: extraction time of 30 min, (NH4)2SO4 concentration of 22 %, temperature of 62.07 °C, n-propanol concentration of 30.13 %, and pH value of 7.66. In addition, the HPLC-MS/MS quantitative analysis of 25 pesticides in TCMs (i.e., honeysuckle and lily) was accomplished with recovery rates ranging from 64.2 % to 117.1 %. Moreover, the greenness of this method was evaluated using an analytical greenness calculator, and compared with other extraction techniques. The results indicate that the developed method is simple, efficient, and environmentally friendly, capable of trace-level enriching and simultaneously detecting multi-residue pesticides in TCM.

Simultaneous analysis of antimicrobial residues and contaminants in poultry droppings by HPLC-MS/MS: a tool for environmental and food safety monitoring

Animal waste is a potential pollution hazard as it can harbour contaminants, such as antimicrobial residues, mycotoxins, and pesticides, becoming a risk to the public, animal, and environmental health. To assess this risk, 15 experimental broiler chickens orally received contaminants to evaluate excretion levels. An analytical method was previously developed to detect 18 substances in poultry droppings using high-performance liquid chromatography coupled to a tandem mass spectrometer (HPLC-MS/MS). Contaminants including tetracycline, 4-epi-tetracycline, oxytetracycline, 4-epi-oxytetracycline, chlortetracycline, 4-epi-chlortetracycline, tylosin, erythromycin, enrofloxacin, ciprofloxacin, flumequine, florfenicol, sulfachloropyridazine, sulfadiazine, 2,4-dichlorophenoxyacetic acid, zearalenone, alpha- and beta-zearalenol, were extracted with EDTA-McIlvain and acetonitrile. This method showed a p-value < 0.05, RSD < 25%, and R2 > 0.95 in the calibration curves linearity for all analytes. The limit of quantification, selectivity, decision limit for confirmation, matrix effect, precision, and recovery parameters were validated according to European Union document 2021/808/EC, technical report CEN/TR 16059, SANTE/11813/2017 and according to the Veterinary International Conference on Harmonization: VICH GL2 and GL49. This method confirmed the detection of most analytes 12-36 h post-administration and simultaneously detected and quantified mixed contaminants. Thereby, poultry droppings are a potential matrix for spreading contaminants in animal production before slaughter and their control will minimize environmental impacts and mitigate antimicrobial resistance.

Mass spectrometry imaging in plants, microbes, and food: a review

Plant health, which affects the nutritional quality and safety of derivative food products, is influenced by symbiotic interactions with microorganisms. These interactions influence the local molecular profile at the tissue level. Therefore, studying the distribution of molecules within plants, microbes, and plant-based food is crucial to assess plant health, ensure the safety and quality of the agricultural products that become part of our food supply, and plan agricultural management practices. Within this framework, the molecular distribution within plant-based samples can be visualized with mass spectrometry imaging (MSI). This review describes key MSI methodologies, highlighting the role they play in unraveling the localization of metabolites, lipids, proteins, pigments, and elemental components across plants, microbes, and food products. Furthermore, investigations that involve multimodal molecular imaging approaches combining MSI with other imaging techniques are described. The advantages and limitations of the different MSI techniques that influence their applicability in diverse agro-food studies are described to enable informed choices for tailored analyses. For example, some MSI technologies involve meticulous sample preparation while others compromise spatial resolution to gain throughput. Key parameters such as sensitivity, ionization bias and fragmentation, reference database and compound class specificity are described and discussed in this review. With the ongoing refinements in instrumentation, data analysis, and integration of complementary techniques, MSI deepens our insight into the molecular biology of the agricultural ecosystem. This in turn empowers the quest for sustainable and productive agricultural practices.

Identification of molecular interactions of pesticides with keratinase for their potential to inhibit keratin biodegradation

The recalcitrant, fibrous protein keratin is found in the outermost layer of vertebrate skin, feathers, hair, horn, and hooves. Approximately, 10 million tons of keratin wastes are produced annually worldwide, of which around 8.5 million tons are from feather wastes. The biodegradation of keratin has been a challenge due to the lack of understanding of biological parameters that modulate the process. Few soil-borne microbes are capable of producing keratinase enzyme which has the potential to degrade the hard keratin. However, various pesticides are abundantly used for the management of poultry farms and reports suggest the presence of the pesticide residues in feather. Hence, it was hypothesized that pesticides would interact with the substrate-binding or allosteric sites of the keratinase enzyme and interferes with the keratin-degradation process. In the present study, molecular interactions of 20 selected pesticides with the keratinase enzyme were analyzed by performing molecular docking. In blind docking, 14 out of 20 pesticides showed higher inhibitory potential than the known inhibitor phenylmethylsulfonyl flouride, all of which exhibited higher inhibitory potential in site-specific docking. The stability and strength of the protein complexes formed by the top best potential pesticides namely fluralaner, teflubenzuron, cyhalothrin, and cyfluthrin has been further validated by molecular dynamic simulation studies. The present study is the first report for the preliminary investigation of the keratinase-inhibitory potential of pesticides and highlights the plausible role of these pesticides in hindering the biological process of keratin degradation and thereby their contribution in environmental pollution.

Graphical abstract

Illustration depicting the hypothesis, experimental procedure, and the resultant keratinase-inhibitory potential of selected pesticides.

Validation and application of a method for determination of multi-class pesticides in muscle chicken breast fillets using QuEChERS extraction and GC/MS

Introduction

The occurrence of pesticide residues in animal products deserves attention because of the contamination by environmental pollutants and pesticides that may be present in the food that animals are fed. The goal of this work was the validation of a method for detection of residues of multiple classes of pesticide and determination of their residues in chicken breast fillets.

Material and Methods

Gas chromatography with mass spectrometry was used for analysis. A modified quick, easy, cheap, effective, rugged and safe (QuEChERS) method was put into practice for its validation and applied to real samples. The study optimised mass detection and investigated the effect of a freezing step during the preparation of samples. Pesticides were determined in samples from conventional and organic production.

Results

The impact of the matrix effect decreased, with the largest number of pesticides and satisfactory recovery determined by the application of mixed solvent acetonitrile and ethyl acetate for extraction. Detection of pesticide residues was achieved in a linear range between 5 and 50 µg/kg with satisfactory excellent correlation coefficients greater than 0.99. The recovery of all the pesticide residues ranged between 71.2 and 118.80%. The relative standard deviation was from 2.9% to 18.1% for all validated pesticide residues. The limits of quantification were in the range of 3.0-4.9 µg/kg. Out of 56 pesticide residues analysed in real samples, 5 were detected: α endosulfan, cypermethrin, endosulfan sulphate, permethrin and p,p´-dichlorodiphenyltrichloroethane (DDT) and their concentrations ranged from 4.9 to 15.2 µg/kg.

Conclusion

All tested samples were compliant with the evaluation criteria, and detected values of pesticide residues were lower than the maximum residual levels.

Hydrogel-integrated sensors for food safety and quality monitoring: Fabrication strategies and emerging applications

Food safety is a global issue in public hygiene. The accurate, sensitive, and on-site detection of various food contaminants performs significant implications. However, traditional methods suffer from the time-consuming and professional operation, restricting their on-site application. Hydrogels with the merits of highly porous structure, high biocompatibility, good shape-adaptability, and stimuli-responsiveness offer a promising biomaterial to design sensors for ensuring food safety. This review describes the emerging applications of hydrogel-based sensors in food safety inspection in recent years. In particular, this study elaborates on their fabrication strategies and unique sensing mechanisms depending on whether the hydrogel is stimuli-responsive or not. Stimuli-responsive hydrogels can be integrated with various functional ligands for sensitive and convenient detection via signal amplification and transduction; while non-stimuli-responsive hydrogels are mainly used as solid-state encapsulating carriers for signal probe, nanomaterial, or cell and as conductive media. In addition, their existing challenges, future perspectives, and application prospects are discussed. These practices greatly enrich the application scenarios and improve the detection performance of hydrogel-based sensors in food safety detection.

A Facile Determination of Herbicide Residues and Its Application in On-Site Analysis

Abuse of herbicides in food safety is a vital concern that has an influence on the sustainable development of the world. This work presents, a modified ionization method with separation of the sample and carrier gas inlets, which was utilized for efficient ionization and analyte transfer of herbicides in crops. The working parameters of voltage, injective distance, desorption temperature, and the carrier gas flow rate were optimized to achieve the high efficiency of the transfer and ionization of the analyte. When it was applied in the analysis of herbicides in laboratory, the method exhibited excellent performance in achieving the quantitative detection of herbicides in solutions and residues spiked in an actual matrix with a limit of quantification of 1-20 μg/kg and relative standard deviations of less than 15%. Although a simple QuEchERS process was used, the programmable heating platform ensured efficient gasification and transfer of the target analyte, with the advantages of high speed and selectivity, avoiding the noted matrix effect. The method exhibited a relatively acceptable performance by using air as the discharged gas (open air). It could be used to monitor herbicide residues in the growth stage via on-site non-destructive analysis, which obtained low LODs by dissociating the herbicides from the crops without any pretreatment. It showed great potential for the supervision of the food safety market by achieving non-destructive detection of crops anytime and anywhere. This finding may provide new insights into the determination of pesticide emergence and rice quality assessment.

Pesticide residues in animal-derived food: Current state and perspectives

Pesticides are widely used in the cultivation and breeding of agricultural products all over the world. However, their direct use or indirect pollution in animal breeding may lead to residual accumulation, migration, and metabolism in animal-derived foods, posing potential health risks to humans through the food chain. Therefore, it is necessary to detect pesticide residues in animal-derived food using simple, reliable, and sensitive methods. This review summarizes sample extraction and clean-up methods, as well as the instrumental determination technologies such as chromatography and chromatography-mass spectrometry for residual analysis in animal-derived foods, including meat, eggs and milk. Additionally, we perspectives on the future of this field. This information aims to assist relevant researchers in this area, contribute to the development of ideas and novel technical methods for residual detection, metabolic research and risk assessment of pesticides in animal-derived food.

A proof-of-concept study on the versatility of liquid chromatography coupled to high-resolution mass spectrometry to screen for various contaminants and highlight markers of floral and geographical origin for different honeys

The high-resolution mass spectrometry is a powerful analytical tool for improving food safety and authenticity, but still underused in official control laboratories. The present work is a proof-of-concept study overviewing how liquid-chromatography coupled to high-resolution mass spectrometry could be used simultaneously for large-scale screening of contaminants and differentiation of honey samples. Within this study, the samples were extracted using all-in-one QuEChERS-based protocol that allowed for analysis of various anthropogenic contaminants and endogenous compounds. First, targeted-analysis of 52 honey samples led to unequivocal identification of 23 chemicals, including neonicotinoids, triazole fungicides and synergist. Then, suspect-screening using MSDial software allowed for tentative identification of 30 chemicals including plasticizers, flame-retardants and additives. Suspect-screening also made it possible to highlight tentative markers of chestnut honey (deoxyvasicinone, 2-quinolone, indoleacrylic acid and kynurenic acid) and citrus honey (caffeine, 2-oxindole and indole-3-carbinol). Lastly, non-targeted analysis enabled to separate honeys by their type, floral and geographical origins.

Distribution of Pesticides and Polychlorinated Biphenyls in Food of Animal Origin in Croatia

Pesticides and polychlorinated biphenyls (PCBs) are persistent environmental pollutants. When entering the food chain, they can represent a public health problem due to their negative effects on health. In this study, concentrations of organochlorine pesticides (OCPs), organophosphate pesticides (OPPs), pyrethroids, carbamates, and PCBs-a total 73 compounds-were determined in a total of 2268 samples of fat tissues (beef, pork, sheep, goat, poultry, game, horse, rabbit) and processed fat, meat, and processed meat products collected in Croatia during an 8-year period. In fatty tissues, 787 results exceeded the limits of quantification (LOQ): 16 OCPs, eight OPPs, six pyrethroids, one carbamate, and seven PCBs. The most positive results in fat samples were found for OCPs, with a frequency of quantification in the range of 57.5-87.5%. Hexachlorobenzene (HCB) and dichlorodiphenyldichloroethylene (DDE) were quantified in the highest percentages, in the ranges of 5.5-66.7% and 5.4-55.8%. Concentrations above the MRL values were determined for chlorpyrifos in pork fat and for resmethrin in six fat samples and one pâté. In 984 samples of meat and meat products, only 62 results exceeded the LOQ values. The highest frequency of quantification was determined for OCPs (25 samples), of which 40% were DDT isomers (60% DDE). Frequency quantifications of PCBs in fat samples were between 7.23 and 36.7%. An evaluation of the health risk assessment showed that the consumption of fat, meat, and meat products does not pose a threat to consumer health, since all EDI values were well below the respective toxicological reference values.

Recent Studies and Applications of Hydrogel-Based Biosensors in Food Safety

Food safety has increasingly become a human health issue that concerns all countries in the world. Some substances in food that can pose a significant threat to human health include, but are not limited to, pesticides, biotoxins, antibiotics, pathogenic bacteria, food quality indicators, heavy metals, and illegal additives. The traditional methods of food contaminant detection have practical limitations or analytical defects, restricting their on-site application. Hydrogels with the merits of a large surface area, highly porous structure, good shape-adaptability, excellent biocompatibility, and mechanical stability have been widely studied in the field of food safety sensing. The classification, response mechanism, and recent application of hydrogel-based biosensors in food safety are reviewed in this paper. Furthermore, the challenges and future trends of hydrogel biosensors are also discussed.

Wide-Scope Multi-residue analysis of pesticides in beef by gas chromatography coupled with quadrupole Orbitrap mass spectrometry

Increasing pesticide contamination in foods of animal origin has made the wide-scope multi-residue analysis of pesticides an international concern. By using 191 pesticides, this study investigates a sensitive and reliable method for multi-residue analysis of pesticides in beef to determine the extent of the application of this method. The QuEChERS method was employed to extract and purify the pesticides as C18 was utilized as the absorbents. Then, the purified pesticides were analysed using gas chromatography - quadrupole orbitrap mass spectrometry (GC-Q-Orbitrap-MS). The validation test results revealed that this method was satisfactorily sensitive since its screening detection limit (SDL) ranged from 0.2 to 100 µg∙kg^-1. The recovery tests implemented at three spiking levels, namely 100, 200, and 500 µg∙kg^-1, generated the results of 71.95 %-113.97 %, while the intra- and inter-day precisions were 0.27 %-17.94 %, indicating that this method had excellent accuracy and precision.

Evaluation the food safety of cultured fat via detection of residues of adipogenic differentiation cocktail in cultured fat with high performance liquid chromatography and enzyme-linked immunosorbent assay

Cultured fat is inducing adipose progenitor cells (APCs) to differentiate into mature adipocytes for consumption. The traditional adipogenic differentiation cocktail, including insulin, dexamethasone, indomethacin, isobutylmethylxanthine and rosiglitazone, has potential food safety problems in cultured fat. Therefore, the detection of these residues is necessary to ensure food safety. In this research, a method of high performance liquid chromatography (HPLC) was established to quantitatively analyze the potential residual content of dexamethasone, indomethacin, isobutylmethylxanthine and rosiglitazone in cultured fat and medium. Quantitative analysis showed that the content of four residues in cultured fat decreased to zero on Day 10. Subsequently, enzyme-linked immunosorbent assay (ELISA) was performed to detect the insulin content in the cultured fat and found that the insulin content in the cultured fat on Day 10 was 2.78 ± 0.21 μg/kg. After soaking with phosphate buffered saline (PBS), the insulin content decreased to 1.88 ± 0.54 μg/kg. In conclusion, this research provided an effective approach to clarify the content of potential residual components in cultured fat and it will provide reference for the safety of cultured fat in the future.

Advances in Accurate Quantification Methods in Food Analysis

Food safety is an important topic, and with the perfection of regulations and technologies, food safety is improving [...]

Multiresidue analysis of pesticides, polyaromatic hydrocarbons and polychlorinated biphenyls in poultry meat and chicken eggs by GC-MS/MS: method development and validation

The study uses gas chromatography with tandem mass spectrometry (GC-MS/MS) to develop a reliable analytical approach for detecting multiclass pesticides, polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) in poultry meat and chicken eggs. The meat (2 g) and egg (4 g) samples were extracted with acidified acetonitrile (10 mL) as part of the optimized sample preparation technique. The cleanup consisted of freezing an aliquot of the extract (5 mL) at -20 °C, followed by dispersive solid phase extraction using 50 mg PSA + 100 mg C₁₈+150 mg MgSO₄. The matrix co-extractives were effectively removed and the method performance met the European Commission's analytical quality control criteria (SANTE/12682/2019). The method was validated at two spiking levels (10 and 20 ng/g of 225 pesticides, 9 PAHs and 8 PCBs), and good recoveries (70-120%) and precision-RSDs (≤20%) were achieved for 90% of the targeted pesticide residues. For 80% of the compounds, the LOQs were ≤10 ng/g. The results of the intra-laboratory (involving six analysts) and inter-laboratory validation studies (involving eight ISO 17025 accredited laboratories) established satisfactory ruggedness and reproducibility. It created potential applications in commercial residue testing laboratories for regulatory compliance check purposes.

Simultaneous analysis of multiple pesticide residues in tobacco by magnetic carbon composite-based QuEChERS method and liquid chromatography coupled to quadrupole time-of-flight mass spectrometry

Magnetic carbon composite (Fe3O4@C) was synthesized and applied as a reversed-dispersive solid-phase extraction sorbent for the simultaneous analysis of 40 pesticide residues in tobacco by ultrahigh-performance liquid chromatography coupled to quadrupole time-of-fight mass spectrometry. Compared to the traditional QuEChERS method, the optimized Fe3O4@C simplified clean-up process and exhibited better clean-up capability than conventional sorbents. The pesticides were qualitatively identified by accurate mass of protonated molecules, fragment ions, isotopic peak clusters, and retention time, and quantitatively determined by matrix-matched external standard method. Good linearity of the proposed method was obtained with R value greater than 0.997 for all target pesticides at concentration levels of 2-200 µg/L. The limit of detection ranged from 0.14 to 2.67 µg/kg. The recoveries and relative standard deviations of all target pesticides at three spiked concentrations of 20, 50 and 200 µg/kg were in the ranges of 80.8%-113.3% and 0.6%-16.3%, respectively. Compared with the reported methods for the analysis of multiple pesticide residues in tobacco, the proposed method has the advantages of simple to operate, high clean-up ability and less time-consuming in clean-up process.

Graphene Based Nanohybrid Aptasensors in Environmental Monitoring: Concepts, Design and Future Outlook

In view of ever-increasing environmental pollution, there is an immediate requirement to promote cheap, multiplexed, sensitive and fast biosensing systems to monitor these pollutants or contaminants. Aptamers have shown numerous advantages in being used as molecular recognition elements in various biosensing devices. Graphene and graphene-based materials/nanohybrids combined with several detection methods exhibit great potential owing to their exceptional optical, electronic and physicochemical properties which can be employed extensively to monitor environmental contaminants. For environmental monitoring applications, aptamers have been successfully combined with graphene-based nanohybrids to produce a wide range of innovative methodologies. Aptamers are immobilized at the surface of graphene based nanohybrids via covalent and non-covalent strategies. This review highlights the design, working principle, recent developmental advances and applications of graphene based nanohybrid aptasensors (GNH-Apts) (since January 2014 to September 2021) with a special emphasis on two major signal-transduction methods, i.e., optical and electrochemical for the monitoring of pesticides, heavy metals, bacteria, antibiotics, and organic compounds from different environmental samples (e.g., water, soil and related). Lastly, the challenges confronted by scientists and the possible future outlook have also been addressed. It is expected that high-performance graphene-based nanohybrid aptasensors would find broad applications in the field of environmental monitoring.

Highly selective monoclonal antibody-based lateral flow immunoassay for visual and sensitive determination of conazole fungicides propiconazole in vegetables

The conazole fungicide propiconazole is frequently found in vegetables although usage is not allowed. To overcome the high-cost and time-consuming labour requirements of instrumental methods, we developed a simple and visual lateral flow immunoassay for the sensitive determination of propiconazole. A hapten was carefully designed to raise a monoclonal antibody against propiconazole. Bal b/c mice were immunised with the hapten-carrier protein conjugate and a specific monoclonal antibody (mAb) was produced. Based on this mAb, a sensitive immunochromatographic strip assay (ICA) was established for rapid screening of propiconazole in vegetable samples. After optimisation of analytical parameters, the ICA strip showed a detection limit of 0.13 ng g-1 and a linear range from 0.5 to 80 ng g-1 using a strip reader. The assay also can be read by the naked eye with a visual limit of detection of 80 ng g-1. The recoveries for spiked vegetable samples by ICA ranged from 85.2% to 114.9%, with a coefficient of variation less than 11.7%. The assay time is within 45 min for a single sample including the sample pre-treatment. For spiked and blind samples, the detection capability of ICA was equivalent to liquid chromatography-mass spectrometry.

Integrated QuEChERS strategy for high-throughput multi-pesticide residues analysis of vegetables

An integrated QuEChERS strategy was developed by combining the extraction and purification processes into a single step. All of the pretreatment procedures could be performed in one tube within 5 min with the aid of magnetic nanoparticles and careful optimization of the key parameters, including the dosages of the sorbents (magnetic nanoparticles, C18, and graphitized carbon black), dehydrating and salting out reagents. The optimal method was validated and compared with the conventional QuEChERS method, demonstrating its clear superiority in terms of operating procedure, sample pretreatment time, and reagent dosages while affording equivalent pesticide recoveries and matrix effects. Further application of this method was performed to analyze 127 pesticide residues in solanaceous vegetables (tomato, pepper, and eggplant), leafy vegetables (brassica campestris and cabbage), legumes (green beans and cowpea), melon-type vegetables (cucumber and towel gourd), and a root vegetable (water bamboo), with the mean recoveries of the pesticides in the individual vegetable samples ranging from 70.6 to 92.8%. The method LOQs for these pesticides ranged from 10 to 50 μg/kg depending on the matrix. These results fully confirmed its wide applicability and versatility for achieving robust, rapid, and high-throughput multi-pesticide residues analysis in vegetable samples. More importantly, the developed strategy provides a greener and more "QuEChERS" design concept, which could be applied to the analysis of numerous types of pesticide residues in various matrices.

Recognition elements based on the molecular biological techniques for detecting pesticides in food: A review

Excessive use of pesticides can cause contamination of the environment and agricultural products that are directly threatening human life and health. Therefore, in the process of food safety supervision, it is crucial to conduct sensitive and rapid detection of pesticide residues. The recognition element is the vital component of sensors and methods for fast testing pesticide residues in food. Improper recognition elements may lead to defects of testing methods, such as poor stability, low sensitivity, high economic costs, and waste of time. We can use the molecular biological technique to address these challenges as a good strategy for recognition element production and modification. Herein, we review the molecular biological methods of five specific recognition elements, including aptamers, genetic engineering antibodies, DNAzymes, genetically engineered enzymes, and whole-cell-based biosensors. In addition, the application of these identification elements combined with biosensor and immunoassay methods in actual detection was also discussed. The purpose of this review was to provide a valuable reference for further development of rapid detection methods for pesticide residues.

Determination of more than 500 Pesticide Residues in Hen Eggs by Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS) and Gas Chromatography-Tandem Mass Spectrometry (GC/MS/MS)

This study aims to validate a fast method of simultaneous analysis of 365 LC-amenable and 142 GC-amenable pesticides in hen eggs by liquid chromatography-tandem mass spectrometry (LC-MS/MS) and gas chromatography-tandem mass spectrometry (GC-MS/MS), respectively, operating in multiple reaction monitoring (MRM) acquisition modes. The sample preparation was based on quick, easy, cheap, effective, rugged, and safe (QuEChERS) extraction. Key method performance parameters investigated were specificity, linearity, limit of quantification (LOQ), accuracy, precision and measurement uncertainty. The method was validated at two spiking levels (10 and 50 μg/kg), and good recoveries (70%-120%) and relative standard deviations (RSDs) (≤20) were achieved for 92.9% of LC-amenable and 86.6% of GC-amenable pesticide residues. The LOQs were ≤10 μg/kg for 94.2% of LC-amenable and 92.3% of GC-amenable pesticides. The validated method was further applied to 100 egg samples from caged hens, and none of the pesticides was quantified.

Synergizing Functional Nanomaterials with Aptamers Based on Electrochemical Strategies for Pesticide Detection: Current Status and Perspectives

Owing to the high toxicity and large-scale use of pesticides, it is imperative to develop selective, sensitive, portable, and convenient sensors for rapid monitoring of pesticide. Therefore, the electrochemical detection platform offers a promising analytical approach since it is easy to operate, economical, efficient, and user-friendly. Meanwhile, with advances in functional nanomaterials and aptamer selection technologies, numerous sensitivity-enhancement techniques alongside a widespread range of smart nanomaterials have been merged to construct novel aptamer probes to use in the biosensing field. Hence, this study intends to highlight recent development and promising applications on the functional nanomaterials with aptamers for pesticides detection based on electrochemical strategies. We also reviewed the current novel aptamer-functionalized microdevices for the portability of pesticides sensors. Furthermore, the major challenges and future prospects in this field are also discussed to provide ideas for further research.

A rapid multiclass method for antibiotic residues in goat dairy products by UPLC-quadrupole/electrostatic field orbitrap high-resolution mass spectrometry

Background

Sulfanilamides, quinolones, nitroimidazoles, tetracyclines, cephalosporins, macrolides, and β-lactam are common tools in agriculture and can be found in animal-based foods such as goat milk and goat dried milk. To evaluate the risk of these species, reliable analytical methods are needed for accurate concentration determination, especially in goat milk and goat dried milk.

Method

We describe a method based on PRiME extraction coupled with UPLC-quadrupole/electrostatic field orbitrap high-resolution mass spectrometry to accomplish this task.

Result

Under optimal conditions, the limit of quantification for all antibiotics was 0.5–100 μg/L in goat milk and goat dried milk samples. The recoveries were 60.6–110.0% for goat milk and 60.1–109.6% for goat dried milk with a coefficient of variation less than 15%. The detection limits were 0.5–1.0 μg/kg. The limits of quantification for the analytes were 5.0–10.0 μg/kg. Finally, the method was used to screen veterinary antibiotics in 50 local goat milk and goat dried milk samples; metronidazole and enrofloxacin were detected in goat milk.

Conclusion

This method offers good reliability and the capacity for simultaneous detection can be used to detect residual contents and evaluate health risks in goat milk and goat dried milk.

One step extraction followed by HPLC-ESI-MS/MS for multi-residue analysis of diacylhydrazine insecticides in water, sediment, and aquatic products

A multi-residue analysis of six diacylhydrazine insecticides in water, sediment, and aquatic products was established by liquid chromatography triple quadrupole tandem mass spectrometry (LC-MS/MS). The water sample was extracted with acetonitrile by low-temperature enrichment liquid-liquid extraction technology. The sediment and aquatic products were prepared using QuEChERS technique. Method validation showed perfect linearity with correlation coefficients (R) more than 0.9992 for all insecticides, and the matrix effects were nearly negligible (-1.42% to -0.27%) for water, sediment and aquatic products. The recoveries were 80.0-99.7% at three spiked levels (0.02 ng·mL^-1, 0.1 ng·mL^-1, 0.5 ng·mL^-1; 2.0, 10, and 50 ng·g^-1) and the precisions (intra-day and inter-day precision) were lower than 5.28%, with the low LODs (3.8 ~ 9.6 pg·mL^-1; 0.38-0.96 ng·g^-1) and LOQs (12.7 ~ 32.0 pg·mL^-1; 1.27-3.20 ng·g^-1) for water, sediment, and aquatic products, indicating the good accuracy and precision of the proposed method. The applicability, efficiency, and sensitivity of this method have been proved in the analysis of six diacylhydrazine insecticides in water, sediment, and crucian carp in Rice- crucian carp - integrated planting system.

Wide-scope multi-residue analysis of pesticides in beef by ultra-high-performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry

Increasing pesticide contamination in foods of animal origin has made the wide-scope multi-residue analysis of pesticides an international concern. In this study, a sensitive and reliable multi-residue pesticide analysis method for beef was developed with the use of 129 pesticides to demonstrate the full scope of the method. The pesticides were extracted and purified using a modified QuEChERS technique and analysed using ultra-high-performance liquid chromatography coupled to quadrupole time-of-flight mass spectrometry. An orthogonal array design was employed for optimisation of the method, significantly scientising and simplifying the process. Method validation revealed satisfactory sensitivity with limits of quantification values ranging from 0.003 to 11.37 µg∙kg^-1. Matrix effects ranged from 83.85% to 120.66%. Recovery at three spiking levels (20, 50, and 100 µg∙kg^-1) were 70.51-128.12% and the intra-day and inter-day precisions were less than 20%, indicating good accuracy and precision.

Simultaneous determination of spirodiclofen, spiromesifen, and spirotetramat and their relevant metabolites in edible fungi using ultra-performance liquid chromatography/tandem mass spectrometry

A fast, sensitive, and reliable analytical method was developed and validated for simultaneous identification and quantification of spirodiclofen, spiromesifen, and spirotetramat and their relevant metabolites in edible fungi by ultra-performance liquid chromatography/tandem mass spectrometry (UHPLC–MS/MS). First, sample extraction was done with acetonitrile containing 1% formic acid followed by phase separation with the addition of MgSO₄:NaOAc. Then, the supernatant was purified by primary secondary amine (PSA), octadecylsilane (C18), and graphitized carbon black (GCB). The linearities of the calibrations for all analytes were excellent (R² ≥ 0.9953). Acceptable recoveries (74.5–106.4%) for all analytes were obtained with good intra- and inter- relative standard deviations of less than 14.5%. The limit of quantification (LOQs) for all analytes was 10 μg kg⁻¹. For accurate quantification, matrix-matched calibration curve was applied to normalize the matrix effect. The results indicated that the method was suitable for detecting the three acaricides and their relevant metabolites in edible fungi.

Facile extraction and determination of organophosphorus pesticides in vegetables via magnetic functionalized covalent organic framework nanocomposites

Facile enrichment and determination of trace organophosphorus pesticides (OPPs) in foods has been a constantly pursuing goal in food safety field. Herein, Zr⁴⁺-immobilized covalent organic frameworks (Fe₃O₄@COF@Zr⁴⁺) have been first constructed and utilized as the powerful adsorbents for magnetic solid-phase extraction (MSPE) of OPPs. Owing to the π-π stacking interaction, hydrogen bonding and Zr⁴⁺-phosphate coordination reaction, the composites exhibited excellent selectivity and superior affinity to OPPs. Under optimized conditions, the proposed MSPE method coupled with GC-FPD showed good linearity (R² ≥ 0.9990) and yielded low limits of detection (0.7-3.0 μg kg^-1) for OPPs. Moreover, the developed method was successfully employed for the quantitation of OPPs in spiked vegetable samples and obtained satisfactory recoveries in the range of 87-121% with the relative standard deviations (RSDs) ≤ 8.9%. These results demonstrated that the prepared nanoparticles hold unique advantages for trace OPPs analysis in foodstuffs.

Single-particle-frit-based packed columns for microchip chromatographic analysis of neurotransmitters

The fabrication of effective microchip liquid chromatography (LC) systems tends to be limited by the availability of suitable chromatographic columns. Herein, we developed a glass microchip LC system in which porous single-particle silica was adopted as frits and a freeze-thaw valve was utilized to achieve sample injection without interfering with sampling. The fabrication of single-particle-frit-based packed columns did not require an additional packing channel, thus avoiding dead volumes within the channel interface that can influence chromatographic separation. Further, the length of the packed column could be adjusted using the location of single-particle frits within the column channel. The fabricated frits exhibited high mechanical strength, good permeability, and tolerance for high pressures during chromatographic separation. In particular, the developed microchip LC system was able to withstand high separation pressures of more than 5000 psi. The microchip LC system was applied to the separation of neurotransmitters. Three different monoamine neurotransmitters were completely separated within 5 min with theoretical plate numbers on the order of 100,000 plates m^-1. The microchip LC system has a potential for application in a variety of fields including environmental analysis, food safety, drug analysis, and biomedicine.

Modified QuEChERS extraction method followed by simultaneous quantitation of nine multi-class pesticides in human blood and urine by using GC-MS

Organophosphate, carbamate and pyrethroid pesticides are the most common insecticides used worldwide. They may cause chronic poisoning in farmers and acute poisoning in homicidal or suicidal cases. The determination of trace levels of these pesticides in human blood and urine is very challenging. This study focuses on a simultaneous quantitation method that was developed and validated for multi-class nine pesticides belonging to organophosphate, carbamate and pyrethroid classes in human blood and urine. Target pesticides were extracted from blood and urine using a modified QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) extraction method. Capillary column DB-35 ms (15 m × 0.25 mm, 0.25 µm) was used for chromatography with a 0.079 ml/min flow rate of carrier gas at constant pressure mode. Quantitation of sulfotep, phorate, carbofuran, chlorpyriphos, profenophos, triazophos, pyriproxyfen, lambda-cyhalothrin and permethrin was performed by mass spectrometer equipped with electron impact ionization source using selected ion monitoring (SIM) mode. The lower and upper limits of quantitation for all nine pesticides were 0.01 mg/L and 2.0 mg/dL respectively. The proposed method was proved to be simple, fast, sensitive, and robust. It has been applied to the analysis of 9 pesticides samples.