Trace analysis of bisphenol A and its analogues in eggs by ultra-performance liquid chromatography-tandem mass spectrometry

Exposure to the main Organic Plastic Additives through food contamination

The use of organic plastic additives (OPAs) in food packaging has led to their widespread presence in various foodstuffs. These additives, including mainly flame-retardants, bisphenols, UV-stabilizers and plasticizers, are known for their potential hazards and environmental impact. This review aims to comprehensively assess the contamination of food products by OPAs and evaluate their role as vectors of exposure to hazardous chemicals. A review of recent literature was conducted, focusing on studies that report on the presence and concentrations of OPAs in different food categories, including aquatic products, beverages, cereals, dairy products, eggs, oils, fats, meat, poultry, vegetables, fruits and other food categories. The review also examines regional variations in contamination levels and identifies the pollutants. Significant contamination of foodstuffs by OPAs are highlighted, with varying concentrations reported across different regions and food types. Potential sources of contamination include food-packaging materials and environmental pollution. This review also identifies research gaps and proposes future directions to improve the study of OPAs in food, aiming to enhance the reliability and comparability of findings while supporting efforts to mitigate contamination risks.

Bisphenol a monitoring by commercial pregnancy test strips transformed by DNA walking machine

Frequently occurred food contamination issues bring about a tremendous global demand for point-of-care testing (POCT) devices. Pregnancy test strip (PTS) retains the highest POCT market share and a low cost of $0.10 per test, but challenged by limited analytical sensitivity and non-autonomous signal transduction for drink contaminant monitoring. Herein, we developed a DNA walking machine-assisted commercial PTS method for on-site bisphenol A (BPA) analysis. DNAzyme was operated as the efficient autonomous catalytic walker chain to drive the DNA machine for the amplified signal output of BPA in drink samples. A detection limit of 16.8 pg/mL was obtained. The POCT strategy constructed in this work has the characteristics of low cost, convenient operation and high analytical sensitivity, represents an attractive option for biosensing and on-site drink safety monitoring.

Integrating detection and degradation of bisphenol A by photocatalytic fuel cell-driven photoelectrochemical sensor

To ensure food safety and environmental protection, it is crucial to rapidly identify and remove bisphenol A (BPA), a plasticizer commonly used in the inner lining of food containers and beverage packaging. Here, a photocatalytic fuel cell (PFC)-integrated self-powered photoelectrochemical (PEC) sensor is constructed. Unlike conventional single PEC or PFC sensors, this PFC-integrated PEC sensor relies on not only the difference in Fermi energy levels between photoanode and photocathode but also charge accumulation resulted from the oxidation of BPA by photogenerated holes. Consequently, this sensor achieved a remarkable maximum output power (Pmax) of 8.58 μW cm-2, as well as a high sensitivity, wide linear detection range (0.1-200 μM), low detection limit (0.05 μM), great stability, reproducibility, and real sample detection capability. This work integrates PFC and PEC technologies successfully for the rapid identification and efficient removal of BPA.

Determination of Bisphenol Compounds and the Bioaccumulation after Co-Exposure with Polyethylene Microplastics in Zebrafish

Knowledge regarding the combined toxicity mechanism of bisphenol compounds and microplastics (MPs) on organisms remains limited. In this study, we first developed an accurate and sensitive method to simultaneously quantify two bisphenol compounds and evaluate their accumulation and tissue distribution after co-exposure with MPs in zebrafish. Then, we determined the bioaccumulation potential of bisphenol A (BPA) and bisphenol S (BPS) in adult zebrafish in the absence and presence of MPs. Bisphenol compounds were found to accumulate in different tissues of zebrafish, with BPS showing lower accumulation levels compared to BPA. Importantly, we discovered that the presence of MPs could exacerbate the accumulation of bisphenol compounds in biological tissues. These findings highlight the enhanced bioavailability and risk posed by the co-exposure of bisphenol compounds and MPs, underscoring the need for further investigation into their combined environmental and biological health impacts.

Adverse outcomes of the newly emerging bisphenol A substitutes

BPA and its analogues are facing increasingly stringent regulations restricting their use due to the increasing knowledge of their harmful effects. It is therefore expected that novel BPA analogues and alternatives will replace them in plastic products, cans and thermal paper to circumvent restrictions imposed by legislation. This raises concerns about the safety of "BPA-free" products, as they contain BPA substitutes whose safety has not been sufficiently assessed prior to their market introduction. The regulatory agencies have recognised BPAP, BPBP, BPC2, BPE, BPFL, BPG, BPP, BPPH, BPS-MAE, BPS-MPE, BP-TMC, BPZ and the alternatives BTUM, D-90, UU and PF201 as compound with insufficient data regarding their safety. We demonstrate that the mentioned compounds are present in consumer products, food and the environment, thus exhibiting toxicological risk not only to humans, but also to other species where their toxic effects have already been described. Results of in silico, in vitro and in vivo studies examining the endocrine disruption and other effects of BPA analogues show that they disrupt the endocrine system by targeting various nuclear receptors, impairing reproductive function and causing toxic effects such as hepatotoxicity, altered behaviour and impaired reproductive function. In vitro and in vivo data on BPA alternatives are literally non-existent, although these compounds are already present in commonly used thermal papers. However, in silico studies predicted that they might cause adverse effects as well. The aim of this article is to comprehensively collate the information on selected BPA substitutes to illustrate their potential toxicity and identify safety gaps.

Determination of nine bisphenol analogues in human urine by high-throughput solid-phase extraction and ultra-high performance liquid chromatography-tandem mass spectrometry analysis

Bisphenol analogues (BPs) are a class of typical environmental endocrine-disrupting chemicals (EDCs). This study aimed to establish a highly sensitive and high-throughput method utilizing 96-well solid-phase extraction (96-well SPE) in conjunction with ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) employing multiple reaction monitoring (MRM), information-dependent acquisition (IDA), and enhanced product ion (EPI) scan modes for the identification and quantitative analysis of nine BPs in human urine. Urine samples were initially thawed to room temperature, followed by digestion using β-glucuronidase in an ammonium acetate buffer solution at 37 °C overnight. Subsequently, they were purified using 96-well SPE and finally analyzed by UHPLC-MS/MS. The limits of detection (LOD) for the nine BPs ranged from 0.05 μg∙kg-1 to 0.3 μg kg-1. Average recoveries fell within the range of 92.8 % to 111.7 %. Moreover, both the intra-day and inter-day precisions were satisfactory, with relative standard deviations (RSDs) ranging from 2.2 % to 6.7 % and 3.5 % to 6.3 %, respectively. The targets in the samples exhibited a perfect match, with a purity fit value exceeding 70 % from the self-built library. The analytical method developed in this study demonstrates high accuracy and sensitivity. In addition, the MRM-IDA-EPI mode can effectively identifies the target BPs and prevents false positive detection of analytes in the urine.

Assessing dietary bisphenol A exposure among Koreans: comprehensive database construction and analysis using the Korea National Health and Nutrition Examination Survey

Bisphenol A (BPA) exposure primarily occurs through dietary intake. This study aimed to estimate the extent of dietary BPA exposure among Koreans. A thorough literature search was conducted to establish a BPA content database encompassing common foods consumed in Korea, including various food raw materials and processed food products. Dietary exposure levels were estimated by integrating the constructed BPA database with comprehensive nationwide 24 h-dietary recall datasets. The finding revealed that dietary BPA exposure was low for most Koreans, with a mean of 14.5 ng/kg bw/day, but was higher for preschool-age children (over 23 ng). Canned foods accounted for 9-36% of the total dietary exposure of the highest dietary exposure groups; while across all age groups, a considerable amount was derived from canned tuna, contribution of canned fruits and canned coffee (milk-containing) was high for preschool-age children and adults, respectively. Notably, for adults, a substantial proportion also stemmed from beer packaged in cans. While diet contributed over 80% of aggregate exposure for most age groups, preschool-age children experienced 60% exposure through diet due to additional exposure from indoor dust. Even at the high exposure scenario, aggregate BPA exposure levels remained lower than the current tolerable daily intake (TDI) set by the Korean agency (20 μg/kg bw/day). Nevertheless, most Koreans were exposed to BPA levels surpassing the strictest TDI (0.2 ng/kg bw/day) set by the European Food Safety Authority.

A fluorescent method for bisphenol A detection based on enzymatic oxidation-mediated emission quenching of silicon nanoparticles

As a common raw material of industrial products, bisphenol A (BPA) is widely used in the production of food contact materials, and there is a high risk of exposure in food. However, BPA is a well-known endocrine disruptor and poses a serious threat to human health. Herein, a fluorescent sensing platform of BPA based on enzymatic oxidation-mediated fluorescence quenching of silicon nanoparticles (SiNPs) is established and used to the detection of BPA in food species. The SiNPs are prepared with a facile one-step synthesis and emit bright green fluorescence. BPA can be oxidized by horseradish peroxidase (HRP) and hydrogen peroxide (H2O2) to form a product which can quench the fluorescence of SiNPs through electron transfer. There is a good linear relationship between the fluorescence intensity and BPA concentration in the range of 1-100 μM. Therefore, a fluorometry of BPA is established with a low limit of detection (LOD) of 0.69 μM. This method has been applied to the determination of BPA in mineral drinking water, orange juice, and milk with satisfactory results. The fluorescent sensor of BPA based on SiNPs has favorable application foreground in the field of food safety analysis.

Electrochemical sensor for sensitive detection of bisphenol A based on molecularly imprinted TiO2 with oxygen vacancy

Bisphenol A (BPA) is an endocrine disrupting chemical and broadly used in plastics. The leakage of BPA in food and water cycles poses a significant risk to the environment and human health. Thus, monitoring the concentration of BPA to avoid its potential risk is highly important. In this work, a simple and efficient oxygen deficient molecularly imprinted TiO2 electrochemical sensor was proposed for the detection of BPA. The introduction both oxygen vacancies and molecular imprinting evidently enhanced the electrochemical oxidation signal of BPA. The sensor had a good linear response ranging from 0.01 μM to 20 μM with a limit of detection of 3.6 nM. Additionally, the sensor showed remarkable stability, reproducibility and interference resistant ability. It also exhibits excellent recovery during the detection of real water. These findings suggested that the sensor has the potential to be developed as a simple, efficient and low-cost monitoring system for the monitoring of BPA in water.

Obesogenic effect of Bisphenol P on mice via altering the metabolic pathways

Bisphenol P (BPP), structurally similar to bisphenol A, is commonly identified in the samples of environment, food, and humans. Unfortunately, very little information is currently available on adverse effects of BPP. The obesogenic effects and underlying mechanisms of BPP on mice were investigated in this study. Compared with the control, high-resolution microcomputed tomography (micro-CT) scans displayed that the visceral fat volume of mice was significantly increased at a dose of 5 mg/kg/day after BPP exposure for 14 days, whereas the subcutaneous fat volume remained unchanged. Nontargeted metabolomic analysis revealed that BPP significantly perturbed the metabolic pathways of mouse livers, and acetyl-CoA was identified as the potential key metabolite responsible for the visceral fat induced by BPP. These findings recommend that a great deal of attention should be paid to the obesogenic properties of BPP as a result of its widely utilized and persistence in the environment.

Thin-layer chromatography coupled with HPLC-DAD/UHPLC-HRMS for target and non-target determination of emerging halogenated organic contaminants in animal-derived foods

In this study, a simple, solvent-saving, and sensitive method was established using high-performance liquid chromatography coupled with high-resolution mass spectrometry to quantitively determine 16 emerging halogenated organic contaminants (HOCs), including polyhalogenated carbazoles, halogenated phenols, and tetrabromobisphenol-A analogs, and to qualitatively identify non-target HOCs in animal-derived food samples. The sample extracts were physically frozen to remove most lipids and further purified by thin-layer chromatography according to the targets polarity. The method detection limit and method quantification limit of 16 HOCs were in the range of 0.003-9.168 and 0.010-30.601 ng·g-1 dry weight, respectively. The recoveries were within 69.1-111.0 %, the intra/inter-day precisions were 0.1-6.1 % and 0.1-6.7 %, and the matrix effects were between -12.1 and 10.8 %, all within the acceptable range. Finally, 16 HOCs were detected in nine actual samples in range of not detected-307.22 ng·g-1 dry weight. Moreover, five bromides and two chlorides were identified by using non-target analysis in animal-derived foods.

A Review on Tetrabromobisphenol A: Human Biomonitoring, Toxicity, Detection and Treatment in the Environment

Tetrabromobisphenol A (TBBPA) is a known endocrine disruptor employed in a range of consumer products and has been predominantly found in different environments through industrial processes and in human samples. In this review, we aimed to summarize published scientific evidence on human biomonitoring, toxic effects and mode of action of TBBPA in humans. Interestingly, an overview of various pretreatment methods, emerging detection methods, and treatment methods was elucidated. Studies on exposure routes in humans, a combination of detection methods, adsorbent-based treatments and degradation of TBBPA are in the preliminary phase and have several limitations. Therefore, in-depth studies on these subjects should be considered to enhance the accurate body load of non-invasive matrix, external exposure levels, optimal design of combined detection techniques, and degrading technology of TBBPA. Overall, this review will improve the scientific comprehension of TBBPA in humans as well as the environment, and the breakthrough for treating waste products containing TBBPA.

Synthesis of perovskite-type potassium niobate using deep eutectic solvents: A promising electrode material for detection of bisphenol A

This study demonstrates a hydrothermal method to prepare perovskite-type potassium niobate (KNbO₃) through deep eutectic solvent (DES), which is further used as an electrode material for the determination of bisphenol A (BPA). The as-synthesized KNbO₃ was systematically characterized by different microscopic and spectroscopic techniques. The KNbO₃-modified electrode demonstrates excellent electrocatalytic activity for BPA compared to the pristine electrode. The enhanced performance of the proposed sensor is attributed to the numerous active sites, large electrochemical surface area, high electrical conductivity, and rapid electron transfer. The fabricated sensor shows a wide detection range (0.01-84.3 μM), a low limit of detection (0.003 μM), a high sensitivity (0.51 μA μM^-1 cm^-2), and good anti-interference abilities towards the BPA detection by linear sweep voltammetry method. Besides, it was successfully applied to determining BPA in food samples, demonstrating good practicability. This design paves a new way to fabricate efficient electrode material for various electrochemical applications using a DES medium.

Enantioselective characteristics, bioaccumulation and toxicological effects of chlordane-related compounds in laying hens

Chlordane-related compounds are ubiquitously detected in the environment and can transfer and accumulate to animals through food chain to cause adverse effects. In this study, the dynamic distribution and the enantiomeric profile of chlordane-related compounds in laying hens over time were investigated. The effect of these compounds on immune-associated cells in the intestinal tract and histopathology in some tissues were also evaluated after long-term exposure. The chlordane-related compounds preferentially accumulated in fat, followed by the intestines, ovum, and egg yolk during long-term exposure. The metabolites heptachlor epoxide and oxychlordane were mainly formed in the liver of hens by epoxidation or hydroxylation. The high accumulation ratios of trans-nonachlor and MC5 were found in ovum and egg yolk after long-term exposure, implying a greater risk to the hens' offspring. Chlordane-related compounds may cause abnormal lipometabolism and glycometabolism in liver of hens. Additionally, (-)-Cis-chlordane was dominant in all tissues of laying hens and its dominance increased over time. Conversely, (+)-isomer of metabolite oxychlordane was overwhelmingly dominant during the experiment. These findings about enantioselectivity, metabolic processes and toxicological effects are crucial in understanding the exposure risk of chlordane-related compounds.

Determination of bisphenol A in commercial cat food marketed in the Czech Republic

OBJECTIVES

Bisphenol A (BPA) is one of the most widely used synthetic compounds on the planet. It is used in the synthesis of polycarbonate plastics, epoxy resins and other polymer materials. Owing to its excellent chemical and physical properties, it is used to produce food and beverage containers or the linings for metal products. BPA has been mentioned as a possible cause of feline hyperthyroidism. Cat food is considered one of the main sources of BPA intake. The purpose of this study was to evaluate BPA concentration in various types of commercial cat food available in the Czech Republic.

METHODS

In total, 172 samples prepared from 86 different types of commercial cat food were assessed. The concentration of BPA was measured using liquid chromatography-tandem mass spectrometry.

RESULTS

Measurable concentration of BPA was found in all samples (range 0.065-131 ng/g), with the highest concentration (mean ± SD) of BPA in canned food (24.6 ± 34.8 ng/g). When comparing BPA concentration in food trays (1.58 ± 0.974 ng/g), pouches (0.591 ± 0.592 ng/g) and dry food (1.18 ± 0.518 ng/g), concentrations of BPA in food trays and dry food were significantly higher (P <0.01) compared with pouches. Comparing BPA concentrations in canned food of different manufacturers, statistically significant differences were found as well.

CONCLUSIONS AND RELEVANCE

The highest concentrations of BPA were found in cans. Thus, cans represent the highest possibility of exposure to BPA in comparison with other types of commercial feline food.

Biomass magnetic porous carbon prepared from mangosteen shell for the preconcentration of 3 bisphenols from beverages followed by liquid chromatographyquadrupoleorbitrap high-resolution mass spectrometry determination

Natural biomass magnetic porous carbon was successfully prepared via a cost-effective and green route using mangosteen shell as raw material. The prepared magnetic porous carbon was used as a magnetic solid phase extraction adsorbent for bisphenols enrichment from beverages followed by high-performance liquid chromatographyquadrupole Orbitrap high-resolution mass spectrometry. Parameters affecting extraction efficiency including sample solutionpH, adsorbent amount, extraction time, eluent type and volume were optimized. Results showed that biomass magnetic porous carbon had excellent adsorption properties for bisphenols due to its large specific surface area and abundant functional groups, which could form hydrogen bonding and π-π stacking with bisphenols. The enrichment factor of 3 bisphenolswere in the range of15∼19. Under optimum conditions, favorable linearity for all analytes was obtained with correlation coefficients higher than 0.998. Recoveries of spiked samples were in the range of 88.5%∼105.1% with relative standard deviation of 3.4%∼5.5%. These results demonstrated thatmagnetic porous carbon may be a promising adsorbent for enrichment of aromatic compounds. This article is protected by copyright. All rights reserved.

Enzymatic probe sonication for quick extraction of total bisphenols from animal-derived foods: Applicability to occurrence and exposure assessment

A high demand exists in bisphenols (BPs) screening studies for quick, reliable and straightforward analytical methods that generate data faster and simultaneously. Herein, we describe a combination of enzymatic probe sonication (EPS) and ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) for quick extraction and simultaneous quantification of eight important BPs in animal-derived foods. Results obtained demonstrated that the ultrasonic probe power could not only enhance the enzymatic hydrolysis efficiency, but also accelerate the liquid-liquid extraction procedure. Under optimized EPS parameters, one sample could be exhaustively extracted within 120 s, as compared with 12 h needed for the conventional enzymatic extraction which is more suitable for high-throughput analysis. The method was successfully applied to analyze residual BPs in animal-derived foods collected from Beijing, China. Widespread occurrence of BPA, BPS, BPF, BPAF, BPP, and BPB were found, with detection frequencies of 65.2%, 42.4%, 33.7%, 29.4%, 28.3%, and 27.2%, respectively. The highest total concentration levels of BPs (sum of the eight BPs analyzed, ΣBPs) were found in chicken liver (mean 12.2 μg/kg), followed by swine liver (6.37 μg/kg), bovine muscle (3.24 μg/kg), egg (2.03 μg/kg), sheep muscle (2.03 μg/kg), chicken muscle (1.45 μg/kg), swine muscle (1.42 μg/kg), and milk (1.17 μg/kg). The estimated daily intake (EDI) of BPs, based on the mean and 95th percentile concentrations and daily food consumptions, was estimated to be 5.687 ng/kg bw/d and 22.71 ng/kg bw/d, respectively. The human health risk assessment in this work suggests that currently BPs do not pose significant risks to the consumers because the hazard index (HI) was <1.

Banana-peel-derived magnetic porous carbon as effective adsorbent for the enrichment of six bisphenols from beverage and water samples

Functionalized magnetic nanoporous carbon derived from banana peel was synthesized through carbonization, porogenesis, carboxylation and magnetization using banana peel and was successfully used as a magnetic solid phase extraction (MSPE) material for the enrichment of six bisphenols (BPs) from beverage and water samples. After the optimization of MSPE process, the enrichment factors of six target analytes were in the range of 74-112 for water samples, and 15-22 for beverage samples. Then, high-performance liquid chromatography-quadrupole-Orbitrap high-resolution mass spectrometry (HPLC-Q Orbitrap-HRMS) was used for the separation and determination of the target analytes. Results showed that the extraction recoveries for 6 BPs were in the range of 71.9-108.4% with an RSD of 2.5-7.5% (n = 6). These results demonstrated that the as-prepared material could efficiently enrich some aromatic compounds and the proposed method is reliable and robust for the determination of BPs in water and beverage samples.

Development of a high-performance liquid chromatography method to assess bisphenol F levels in milk

Bisphenol F (BPF) is a bisphenol A (BPA) analogue. As an endocrine disruptor, BPF shows a similar BPA hormonal activity and greater endocrine effects. To assess BPF levels in milk a selective method based on solvent extraction with acetonitrile, solid-phase extraction (SPE), high-performance liquid chromatography with fluorescence detection (HPLC-FD) system, was developed. The method showed high recovery values (from 97.60 to 107.16%), and good detection and quantification limits (LOD=0.03 μg/L; LOQ=0.1 μg/L). To validate the analytical method, quantitative analyses of n.20 milk samples of whole milk were preliminarily carried out applying a monitoring system based on the control of different stages of pasteurized whole milk processing at a dairy company. The proposed method is simple, sensitive, and might be suitable to detect BPF residues in milk processing. At the dairy company, the occurrence of BPF levels ranging from Collapse

Key Words

• Bisphenol F
• High-performance liquid chromatography method
• Milk

Collapse

MESH Headings Collapse

Grants Collapse

Affiliation(s)

Serena Santonicola Department of Medicine and Health Sciences, University of Molise, Campobasso
Maria Carmela Ferrante Department of Veterinary Medicine and Animal Production, University of Naples, Italy
Giampaolo Colavita Department of Medicine and Health Sciences, University of Molise, Campobasso
Raffaelina Mercogliano Department of Veterinary Medicine and Animal Production, University of Naples, Italy

Collapse

Ratiometric electrochemical sensor for bisphenol A detection using a glassy carbon electrode modified with a poly(toluidine blue)/gold nanoparticle composite

A ratiometric electrochemical sensor for bisphenol A (BPA) detection is developed using a glassy carbon electrode modified with a poly(toluidine blue)/gold nanoparticle composite (PTB/AuNP/GCE). The ratiometric signal, namely, the oxidation peak current ratio of BPA to PTB, increases linearly with BPA concentration in the 0.2-5.0 μM range, with a detection limit of 0.15 μM. The electrochemical mechanism of BPA is studied at the PTB/AuNP/GCE, and the results show that BPA undergoes an electrooxidation process of two electrons and two protons at the PTB/AuNP/GCE. The proposed sensor has high sensitivity, high stability and good selectivity. The application of BPA in water samples is successfully verified using the proposed ratiometric electrochemical sensor.

Molecularly imprinted polymer-based electrochemical sensor for the determination of endocrine disruptor bisphenol-A in bovine milk

Bisphenol A (BPA) contamination from food packaging material has been a major concern in recent years, due to its potential endocrine-disrupting effects on humans, especially infants and children. This paper reports the detection of BPA using an electrochemical sensor based on molecularly imprinted polymer (MIP). Electrochemically reduced graphene oxide coated glassy carbon electrode used for this study. Density functional theory (DFT) at B3LYP/6-31 + G (d,p) level was used to calculate the molecular-level interaction between BPA and MIP. The pyrrole electrochemically polymerized in the presence of template molecule BPA on the electrode surface. BPA imprinted cavities were formed by removing entrapped BPA molecules from the polypyrrole film. MIP electrode was used for the determination of BPA in standard and real samples by differential pulse voltammetry. The peak current shows the linear relationship to the logarithmic concentration of BPA between 750 and 0.5 nmolL^-1 with a correlation coefficient, R² = 0.992. The limit of detection was found to be 0.2 nmolL^-1 (S/N = 3). The reproducibility and repeatability of the sensor were also studied.

A fluorescent aptasensor based on berberine for ultrasensitive detection of bisphenol A in tap water

The residues of bisphenol A (BPA) in food packaging and water systems have a potential impact on human health; therefore, its analysis and detection have drawn scientists' attention. In this work, based on the change in fluorescence intensity resulting from the conformational switch of a berberine/BPA-aptamer system in the presence and absence of BPA, an ultra-sensitive fluorescence aptasensing system is proposed, in which BPA-aptamer is employed as the identification unit and berberine as the fluorescent probe. Various factors affecting the detection of BPA, including the concentration of the fluorescent probe, BPA-aptamer, BPA, pH, system stability time and other experimental conditions, were investigated in detail. Under the optimal experimental conditions, the fluorescence intensity of the sensing system of berberine/BPA-aptamer exhibited a good linear correlation with the BPA concentration in the range of 0-1300 μM with a LOD of 32 nM. The proposed fluorescent sensing system also exhibited excellent recoveries of 92.4-102.3% in tap water samples and showed good application prospects for the analysis and detection of BPA.

Deposition, depletion, and potential bioaccumulation of bisphenol F in eggs of laying hens after consumption of contaminated feed

Increasing concerns over bisphenol A (BPA) as an endocrine disrupting chemical (EDC) and its adverse effects on both humans and animals have led to the substitution by structural analogs, such as bisphenol F (BPF), in many application areas. Information regarding to the carry-over of this emerging chemical in farm animals is essential for legislation and risk assessment purposes. In this study, a large-scale number of animal experiments were designed to investigate the transfer of BPF from feed to eggs. One control and three experimental groups of laying hens (72 hens per group) were fed with basal diets and BPF-contaminated feed at concentration levels of 0.1, 0.5 and 2.5 mg kg^-1, respectively, for two weeks. The hens were then fed with BPF-free diets for a further four weeks. Eggs were collected daily, and separated into egg yolk and white for BPF analysis. The effects of different levels of BPF exposure on laying performance followed a non-monotonic dose-response curve, since low level BPF (0.1 mg kg^-1) exposure did increase the laying rate, mean egg weight and daily feed intake, while high level BPF (2.5 mg kg^-1) exposure showed a decreasing trend. BPF residues were detected in both egg yolks and whole eggs after two days of administration, and plateau phase was achieved within 9-18 days. There are clear linear dose-response relationships between the plateau BPF concentrations in feed and eggs. The residue of BPF was found mainly in egg yolks with conjugated form and depleted slowly (still detected 21 days after feeding the BPF-free diet of the high level group). Mean carry-over rate of 0.59% BPF from feed to eggs was obtained. Compared with the carry-over rates of PCBs and dioxins, BPF showed a relatively minor trend of bioaccumulation in eggs. To the best of our knowledge, this is the first report on the deposition, depletion, and bioaccumulation study of bisphenols in farm animals. The quantity of data can therefore be helpful in the frame of risk assessment, especially for a comprehensive estimation of consumer exposure to the residues of bisphenols.

An amplifying DNA circuit coupled with Mg2+-dependent DNAzyme for bisphenol A detection in milk samples

As bisphenol A (BPA) is harmful to human health, it is of great significance to develop a new method for BPA detection. Herein, we designed a BPA biosensor by integrating an amplifying DNA circuit with Mg²⁺-dependent DNAzyme into the sensing system. The BPA-aptamer binding activated a DNA circuit for signal amplification based on toehold-mediated strand displacement. A catalytic Mg²⁺-dependent DNAzyme was formed through synergistically DNA hybridization, which can cleave the dual-labeled substrate DNA into two segments. The separation of the fluorophore and quencher produces a high fluorescence response for BPA detection. This biosensor exhibited a superior sensitivity with a detection limit of 50 fM. The method is selective and robust, which can work even in milk samples with satisfactory accuracy. The biosensor analytical results were also verified by liquid chromatography coupled with mass spectrometry (LC-MS) and no obvious difference existed between the two methods.