Landmarks in the historical development of twenty first century food processing technologies

Mechanism of action of pulsed electric field on lactoferrin: Functional properties, structure and aggregation behavior

Conventional heat treatment is the primary process causing loss of lactoferrin (LF) in dairy processing. To enhance the retention of LF and improve its functional properties, the study aimed to provide new insights into the functional properties, structure and aggregation behavior of LF under the action of pulsed electric field (PEF) with different electric field intensity (10-45 kV/cm). The results demonstrate that under appropriate electric field intensity, the LF structure can be moderately unfolded, leading to the iron-binding capacity can be increased to over 140 %, a rise in thermal stability by 1-2 °C, and enhancements in foaming and emulsification abilities to 133.6 % and 173.3 %, respectively. Furthermore, the aggregation degree of LF after PEF treatment was significantly lower than that of the pasteurized group (72 °C, 15 s). These findings provide a valuable basis for the application of PEF as an alternative to pasteurization in LF products.

Effect of ohmic heating on the structure and properties of flexible multilayer packaging

Food-packaging-processing interactions define packaging materials' performance properties and product quality. This study evaluated the effect of ohmic heating (OH) processing and different food simulants on the properties of four multilayer flexible packaging materials (PETmet/PE, PETmet/PP, PET/Al/PE, and PET/Al/PA/PP). OH treatment was applied to the sealed packages containing the food simulants using a voltage gradient of 3.7 V/cm at a frequency of 20 kHz, resulting in a thermal process of at 80 °C for 1 min. The structure and performance of the different packages were then evaluated. The materials did not show changes in chemical groups nor thermal properties. However, the simulant-packaging-processing interaction resulted in changes in crystallinity, morphology, mechanical and barrier properties (water and oxygen), especially for metallized films in contact with acidic food simulants. The results indicate that although OH resulted in changes in packaging materials, these materials can be used under the conditions applied in this study.

Advancements in Non-Thermal Processing Technologies for Enhancing Safety and Quality of Infant and Baby Food Products: A Review

Breast milk is the main source of nutrition during early life, but both infant formulas (Ifs; up to 12 months) and baby foods (BFs; up to 3 years) are also important for providing essential nutrients. The infant food industry rigorously controls for potential physical, biological, and chemical hazards. Although thermal treatments are commonly used to ensure food safety in IFs and BFs, they can negatively affect sensory qualities, reduce thermosensitive nutrients, and lead to chemical contaminant formation. To address these challenges, non-thermal processing technologies such as high-pressure processing, pulsed electric fields, radio frequency, and ultrasound offer efficient pathogen destruction similar to traditional thermal methods, while reducing the production of key process-induced toxicants such as furan and 5-hydroxymethyl-2-furfural (HMF). These alternative thermal processes aim to overcome the drawbacks of traditional methods while retaining their advantages. This review paper highlights the growing global demand for healthy, sustainable foods, driving food manufacturers to adopt innovative and efficient processing techniques for both IFs and BFs. Based on various studies reviewed for this work, the application of these novel technologies appears to reduce thermal processing intensity, resulting in products with enhanced sensory properties, comparable shelf life, and improved visual appeal compared to conventionally processed products.

Application of microbial agents in organic solid waste composting: a review

The rapid growth of organic solid waste has recently exacerbated environmental pollution problems, and its improper treatment has led to the loss of a large number of biomass resources. Here, we expound the advantages of microbial agents composting compared with conventional organic solid waste treatment technology, and review the important role of microbial agents composting in organic solid waste composting from the aspects of screening and identification, optimization of conditions, mechanism of action, combination with other technologies and ultra-high-temperature and ultra-low-temperature microbial composting. We discuss the value of microorganisms with different growth conditions in organic solid waste composting, and put forward a seasonal multi-temperature composite microbial composting technology. Provide new ideas for the all-round treatment of microbial agents in organic solid waste in the future. © 2024 Society of Chemical Industry.

Exploring conventional and emerging dehydration technologies for slurry/liquid food matrices and their impact on porosity of powders: A comprehensive review

The contribution of dehydration to the growing market of food powders from slurry/liquid matrices is inevitable. To overcome the challenges posed by conventional drying technologies, several innovative approaches have emerged. However, industrial implementation is limited due to insufficient information on the best-suited drying technologies for targeted products. Therefore, this review aimed to compare various conventional and emerging dehydration technologies (such as active freeze, supercritical, agitated thin-film, and vortex chamber drying) based on their fundamental principles, potential applications, and limitations. Additionally, this article reviewed the effects of drying technologies on porosity, which greatly influence the solubility, rehydration, and stability of powder. The comparison between different drying technologies enables informed decision-making in selecting the appropriate one. It was found that active freeze drying is effective in producing free-flowing powders, unlike conventional freeze drying. Vortex chamber drying could be considered a viable alternative to spray drying, requiring a compact chamber than the large tower needed for spray drying. Freeze-dried, spray freeze-dried, and foam mat-dried powders exhibit higher porosity than spray-dried ones, whereas supercritical drying produces nano-porous interconnected powders. Notably, several factors like glass transition temperature, drying technologies, particle aggregation, agglomeration, and sintering impact powder porosity. However, some binders, such as maltodextrin, sucrose, and lactose, could be applied in controlled agglomeration to enhance powder porosity. Further investigation on the effect of emerging technologies on powder properties and their commercial feasibility is required to discover their potential in liquid drying. Moreover, utilizing clean-label drying ingredients like dietary fibers, derived from agricultural waste, presents promising opportunities.

High-Pressure Processing Effects on Microbiological Stability, Physicochemical Properties, and Volatile Profile of a Fruit Salad

Nowadays, consumers are more aware of the effects of their diet on their health, and thus demand natural or minimally processed food products. Therefore, research has focused on processes that assure safe products without jeopardizing their nutritional properties. In this context, this work aimed to evaluate the effects of high-pressure processing (550 MPa/3 min/15 °C, HPP) on a fruit salad (composed of melon juice and pieces of Golden apple and Rocha pear) throughout 35 days of storage at 4 °C. For the physicochemical properties analysed (browning degree, polyphenol oxidase activity, antioxidant activity (ABTS assay), and volatile profile), a freshly made fruit salad was used, while for the microbiological tests (total aerobic mesophiles, and yeast and moulds) spoiled melon juice was added to the fruit salad to increase the microbial load and mimic a challenge test with a high initial microbial load. It was determined that processed samples were more microbiologically stable than raw samples, as HPP enabled a reduction of almost 4-log units of both total aerobic mesophiles and yeasts and moulds, as well as an almost 1.5-fold increase in titratable acidity of the unprocessed samples compared to HPP samples. Regarding browning degree, a significant increase (p < 0.05) was observed in processed versus unprocessed samples (roughly/maximum 68%), while the addition of ascorbic acid decreased the browning of the samples by 29%. For antioxidant activity, there were no significant differences between raw and processed samples during the 35 days of storage. An increase in the activity of polyphenol oxidase immediately after processing (about 150%) was confirmed, which was generally similar or higher during storage compared with the raw samples. Regarding the volatile profile of the product, it was seen that the compounds associated with melon represented the biggest relative percentage and processed samples revealed a decrease in the relative quantity of these compounds compared to unprocessed. Broadly speaking, HPP was shown to be efficient in maintaining the stability and overall quality of the product while assuring microbial safety (by inactivating purposely inoculated microorganisms), which allows for longer shelf life (7 versus 28 days for unprocessed and processed fruit salad, respectively).

From feed to functionality: Unravelling the nutritional composition and techno-functional properties of insect-based ingredients

In recent years, there has been a growing interest in using insects as a sustainable resource for biorefinery processes. This emerging field aims to convert insect biomass into valuable products while minimizing waste. The integration of emerging green technologies and the efficient extraction of high-value compounds from insects offer promising avenues for addressing the growing demand for sustainable food production and resource utilization. The review examines the impact of dietary modifications on the nutritional profile of insects. It highlights the potential for manipulating insect feed to optimize protein quality, amino acid profile, lipid content and fatty acid composition. Additionally, innovative green processing technologies such as ultrasound, high pressure processing, pulsed electric fields, cold plasma and enzymatic hydrolysis are discussed for their ability to enhance the extraction and techno-functional properties of insect-based ingredients. The review finds that dietary modifications can impact the nutritional composition of insects, allowing the customization of their nutrient content. By optimizing the insect feed, it is possible to increase the quantity and improve the quality of essential nutrients like proteins or lipids in the derived ingredients. Moreover, alternative processing technologies can improve the techno-functional properties (e.g., solubility, water and oil holding capacities, among others) of insect-based ingredients by modifying proteins' conformation. By harnessing these strategies, researchers and industry professionals can unlock the full potential of insects as a sustainable and nutritional food source, paving the way for innovative insect-based food products.

Trends and challenges of fruit by-products utilization: insights into safety, sensory, and benefits of the use for the development of innovative healthy food: a review

A significant portion of the human diet is comprised of fruits, which are consumed globally either raw or after being processed. A huge amount of waste and by-products such as skins, seeds, cores, rags, rinds, pomace, etc. are being generated in our homes and agro-processing industries every day. According to previous statistics, nearly half of the fruits are lost or discarded during the entire processing chain. The concern arises when those wastes and by-products damage the environment and simultaneously cause economic losses. There is a lot of potential in these by-products for reuse in a variety of applications, including the isolation of valuable bioactive ingredients and their application in developing healthy and functional foods. The development of novel techniques for the transformation of these materials into marketable commodities may offer a workable solution to this waste issue while also promoting sustainable economic growth from the bio-economic viewpoint. This approach can manage waste as well as add value to enterprises. The goal of this study is twofold based on this scenario. The first is to present a brief overview of the most significant bioactive substances found in those by-products. The second is to review the current status of their valorization including the trends and techniques, safety assessments, sensory attributes, and challenges. Moreover, specific attention is drawn to the future perspective, and some solutions are discussed in this report.

Conversion of agricultural biomass into valuable biochar and their competence on soil fertility enrichment

Globally several nations generates a large amount of biomass waste. Thus, this review focuses on the potential for converting plant biomass into nutritionally enriched useful biochar with promising properties. The use of biochar on farmland acts as both a soil fertility enhancer, improving both the physical as well as chemical characteristics of soil. The biochar availability in soil can retain minerals and water as well as considerably enhanced the soil fertility by their optimistic characteristics. Thus, this review also discuss about how biochar enhances the quality of agriculture soil and polluted soil. Since, the biochar derived from the plant residues might contain most valuable nutritional properties, which can enhance the physicochemical properties of soil and that can support the growth of plant along with the increased biomolecule content. Since, the healthy plantation can support the production of nutritionally enriched crop yield. Agriculture biochar amalgamated soil significantly improved soil beneficial microbial diversity. Beneficial microbial activity increased soil fertility and balanced the soil's physicochemical properties significantly. Such balanced soil physicochemical properties significantly enhanced plantation growth, as well as disease resistance and higher yield potential than any other fertiliser supplements for soil fertility and plant growth.

Use of HPLC-MS to Determine the Loss of Metabolites in Apple Juices under Different Storage Conditions

The focus of this experiment was to compare the color and metabolic profile of apple juice from the red-fleshed cultivar 'Baya Marisa' with the white-fleshed cultivar 'Golden Delicious'. The changes in the phenolic compounds, organic acids, and sugar content during high-temperature short-time pasteurization and after one year of storage under different storage conditions were analyzed. A total of 26 individual phenolic compounds were identified and quantified. The total analyzed phenolics content (TAPC) decreased after pasteurization of the juices of both cultivars. The TAPC of fresh 'Baya Marisa' juice after pasteurization increased or remained the same compared to one-year stored 'Baya Marisa' juice, depending on the storage method. The sucrose content of the apple juice of both cultivars remained the same after pasteurization; interestingly, it decreased significantly after one year of storage, while the fructose and glucose content remained the same after pasteurization and increased significantly after one year of storage for both cultivars.

Subcritical and Supercritical Fluids to Valorize Industrial Fruit and Vegetable Waste

The valorization of industrial fruit and vegetable waste has gained significant attention due to the environmental concerns and economic opportunities associated with its effective utilization. This review article comprehensively discusses the application of subcritical and supercritical fluid technologies in the valorization process, highlighting the potential benefits of these advanced extraction techniques for the recovery of bioactive compounds and unconventional oils from waste materials. Novel pressurized fluid extraction techniques offer significant advantages over conventional methods, enabling effective and sustainable processes that contribute to greener production in the global manufacturing sector. Recovered bio-extract compounds can be used to uplift the nutritional profile of other food products and determine their application in the food, pharmaceutical, and nutraceutical industries. Valorization processes also play an important role in coping with the increasing demand for bioactive compounds and natural substitutes. Moreover, the integration of spent material in biorefinery and biorefining processes is also explored in terms of energy generation, such as biofuels or electricity, thus showcasing the potential for a circular economy approach in the management of waste streams. An economic evaluation is presented, detailing the cost analysis and potential barriers in the implementation of these valorization strategies. The article emphasizes the importance of fostering collaboration between academia, industry, and policymakers to enable the widespread adoption of these promising technologies. This, in turn, will contribute to a more sustainable and circular economy, maximizing the potential of fruit and vegetable waste as a source of valuable products.

Sustainable emerging high-intensity sonication processing to enhance the protein bioactivity and bioavailability: An updated review

High-intensity ultrasound (HIU) is considered one of the promising non-chemical eco-friendly techniques used in food processing. Recently (HIU) is known to enhance food quality, extraction of bioactive compounds and formulation of emulsions. Various foods are treated with ultrasound, including fats, bioactive compounds, and proteins. Regarding proteins, HIU induces acoustic cavitation and bubble formation, causing the unfolding and exposure of hydrophobic regions, resulting in functional, bioactive, and structural enhancement. This review briefly portrays the impact of HIU on the bioavailability and bioactive properties of proteins; the effect of HIU on protein allergenicity and anti-nutritional factors has also been discussed. HIU can enhance bioavailability and bioactive attributes in plants and animal-based proteins, such as antioxidant activity, antimicrobial activity, and peptide release. Moreover, numerous studies revealed that HIU treatment could enhance functional properties, increase the release of short-chain peptides, and decrease allergenicity. HIU could replace the chemical and heat treatments used to enhance protein bioactivity and digestibility; however, its applications are still on research and small scale, and its usage in industries is yet to be implemented.

Royal jelly mediates fibrotic signaling, collagen cross-linking and cell proliferation in cardiac fibroblasts

Royal jelly (RJ) is a multifunctional bee product with a unique composition and wide-ranging biological properties, including antioxidant, anti-inflammatory and antiproliferative activities. Still, little is known about the possible myocardial protective properties of RJ. Considering that sonication could enhance RJ bioactivity, this study aimed to assess the effects of non-sonicated (NS) and sonicated (S) RJ on fibrotic signaling, cell proliferation, and collagen production in cardiac fibroblasts. S-RJ was produced by ultrasonication at 20 kHz. Ventricular fibroblasts isolated from neonatal rats were cultured and treated with different concentrations of NS-RJ or S-RJ (0, 50, 100, 150, 200, and 250 µg/well). S-RJ significantly depressed the expression levels of transglutaminase 2 (TG2) mRNA across all the concentrations tested and was inversely associated with the expression of this profibrotic marker. S-RJ and NS-RJ displayed distinct dose-dependent effects on mRNA expression of several other profibrotic, proliferation, and apoptotic markers. Unlike NS-RJ, S-RJ elicited strong negative dose-dependent relationships with the expression of profibrotic markers (TG2, COL1A1, COL3A1, FN1, CTGF, MMP-2, α-SMA, TGF-β1, CX43, periostin), as well as proliferation (CCND1) and apoptotic (BAX, BAX/BCL-2) markers, indicating that RJ dose-response effects were significantly modified by sonification. NS-RJ and S-RJ increased the content of soluble collagen, while decreasing collagen cross-linking. Collectively, these findings show that S-RJ has a greater range of action than NS-RJ for downregulating the expression of biomarkers associated with cardiac fibrosis. Reduced biomarker expression and collagen cross-linkages upon cardiac fibroblast treatment with specific concentrations of S-RJ or NS-RJ suggests putative roles and mechanisms by which RJ may confer some protection against cardiac fibrosis.

Improved method of brewing peanut mouth with blending fruit drink of a high degree of readiness

The method of production of peanut paste with blended fruit and vegetable semi-finished products of high degree of readiness based on Jerusalem artichoke and cranberry obtained under conditions of low-temperature concentration has been improved. The production method is characterized by the process of concentration in a rotary-film apparatus at a temperature of 45...50 °C to a content of 28...30 % of dry substances within 1.75...2.00 minutes. The organoleptic evaluation of various recipe ratios of the selected raw materials revealed its optimal content in the semi-finished product (Jerusalem artichoke 65 %, cranberry 35 %), which has a uniform structure, a pleasant aroma of cranberry and Jerusalem artichoke, and its color is red-orange. The obtained fruit and vegetable semi-finished product of a high degree of readiness can be used as a base or additive in various food products of special purpose to increase their nutritional value and provide the products with a health-improving effect. For the production of health-prophylactic peanut paste, a technological manufacturing scheme is proposed with the addition of Jerusalem artichoke and cranberry fruit and vegetable paste to its composition, which will further increase the health-prophylactic properties of the finished product, eliminate the use of sugar and other synthetic stabilizers in comparison with classical technology. The organoleptic evaluation of the received samples of peanut paste with blended fruit and vegetable semi-finished product of a high degree of readiness revealed a rational amount of the semi-finished product at the level of 25 %, while the product has a structured, homogeneous consistency and a pleasant yellow-orange color. The obtained product can be recommended for therapeutic and preventive purposes, as a cholesterol-lowering and immunomodulating agent

Improvement of the method of manufacturing semi-finished products of a high degree of readiness from Jerusalem artichoke tubers

A method has been improved for the production of semi-finished products of a high degree of readiness from Jerusalem artichoke tubers, characterized by a significant natural content of functional and physiological ingredients and health-improving properties to ensure a wide range of uses in processing complexes. The method is distinguished by blanching with hot steam at a pressure in the working chamber of 0.1 MPa for 8...10 min, followed by rubbing to an average particle size of 30...50 µm with a content of 10...11+2 % SR. Subsequent heating of the puree-like mass to 40...45 °C and concentration in a rotary-film evaporator to a content of 20...30+2 % DM at a temperature of 55...60 °C for 55...95 s. The technology for producing concentrated paste from Jerusalem artichoke tubers allows preserving the biological potential of raw materials during the concentration process due to gentle low-temperature processing. The content of functionally physiological ingredients of the puree mass was determined: active acidity – 4.2 pH, dietary fiber – 3.3 g/100 g puree, pectin – 1.25 %, inulin – 10.05 g/100 g puree, and are also important. According to an improved method for the production of a pasty semi-finished product from Jerusalem artichoke tuber, an apparatus-technological scheme is proposed. The selected equipment line is distinguished by resource efficiency and small overall dimensions and can be located in the places where raw materials are collected. The produced paste-like semi-finished product of a high degree of readiness from Jerusalem artichoke contains (in gr.): mono- and disaccharides – 3.6; inulin – 20.3; starch – 10.7; dietary fiber – 14.4 and organic acid – 0.11 and has attractive organoleptic properties. A pasty semi-finished product of a high degree of readiness has been made, which can be recommended as a vitamin supplement (filler) in the production of functional products in various areas of the food and processing industry

Ultra-processed Foods, Weight Gain, and Co-morbidity Risk

PURPOSE OF REVIEW

The purpose of this review is to provide an update on the available data regarding the associations of Ultra-processed food (UPF) consumption with food intake and possible underlying mechanisms relating UPF consumption to weight gain and co-morbidities.

RECENT FINDINGS

In primarily observational studies, UPF consumption is consistently associated with an increased risk for weight gain among adults and children and increased risk for adiposity-related co-morbidities in adults. In a single mechanistic study, consumption of UPFs led to increased energy intake and weight gain relative to whole foods. UPFs tend to be more energy-dense than nutrient-dense, and UPF consumption is associated with increased adiposity and co-morbidity risk. These data suggest that recommendations to limit UPF consumption may be beneficial to health - though further mechanistic studies are needed.

Ultrasonication as a novel processing alternative to pasteurization for camel milk: Effects on microbial load, protein profile, and bioactive properties

Ultrasonic technology presents a promising novel tool in the food industry for the processing of milk and dairy products. In this study, we investigated the effects of ultrasonication (US) as an alternative to thermal pasteurization for stabilization of the bioactive properties of camel milk. Camel and bovine milk samples were subjected to US at 6 different power levels (US1-US6), and 1 set of each type of milk was concurrently subjected to flash heat pasteurization (FHP) for comparative analysis (100 mL; n = 4). The microbiological and bioactive parameters of the samples were analyzed during 7 d of storage at 4°C. In both milk types subjected to US ≥ 140 W (US3), the bacterial load was reduced by almost 4 log cycles and complete reduction of microbial load was achieved with US = 170 W and US = 210 W (US5 and US6 treatments, respectively). No significant changes in protein patterns were observed with either FHP or US treatment. In addition, bioactive properties (cholesteryl esterase and pancreatic lipase inhibition) were either enhanced or retained at US3 or higher. 2,2'-Azino-bis-3-ethylbenzthiazoline-6-sulfonic acid and ferric reducing antioxidant power activities in camel milk were decreased after FHP treatment but increased or retained upon US, particularly at US3 and US4 (160 W). Overall, under our experimental conditions, US4 was effective in completely reducing the microbial count, while concomitantly retaining different bioactive properties of both camel and bovine milk. These outcomes highlight the potential of US at 160 W as an efficient nonthermal alternative processing method for milk.

Conventional and Novel Technologies in the Production of Dairy Bioactive Peptides

Background

In recent years, researchers have focused on functional ingredients, functional foods, and nutraceuticals due to the rapidly increasing interest in bioactive components, especially in bioactive peptides. Dairy proteins are a rich and balanced source of amino acids and their derived bioactive peptides, which possess biological and physiological properties. In the dairy industry, microbial fermentation and enzymatic hydrolysis are promising methods for producing bioactive peptides because of their rapid efficiency, and mild reaction conditions. However, these methods utilize less raw material, take long reaction time, result in low yields, and low activity products when used alone, which pose industry to seek for novel methods as pretreatments to increase the yield of bioactive peptides.

Scope and Approach

This review emphasizes the production of peptides from the dairy proteins and discusses the potential use of novel technologies as pretreatments to conventional methods of bioactive peptides production from dairy proteins, including the mechanisms of novel technologies along with respective examples of use, advantages, limitations, and challenges to each technology.

Key Findings and Conclusion

Noteworthily, hydrolysis of dairy proteins liberate wide-range of peptides that possess remarkable biological functions to maintain human health. Novel technologies in the dairy industry such as ultrasound-assisted processing (UAP), microwave-assisted processing (MAP), and high pressure processing (HPP) are innovative and environmentally friendly. Generally, novel technologies are less effectual compared to conventional methods, therefore used in combination with fermentation and enzymatic hydrolysis, and are promising pretreatments to modify peptides’ profile, improve the yields, and high liberation of bioactive peptides as compared to conventional technologies. UAP is an innovative and most efficient technology as its mechanical effects and cavitation change the protein conformation, increase the biological activities of enzymes, and enhance enzymatic hydrolysis reaction rate.

The future of functional food: Emerging technologies application on prebiotics, probiotics and postbiotics

This review was the first to gather literature about the effect of emerging technologies on probiotic, prebiotic, and postbiotic products. Applying emerging technologies to probiotic products can increase probiotic survival and improve probiotic properties (cholesterol attachment, adhesion to Caco-2 cells, increase angiotensin-converting enzyme (ACE) inhibitory, antioxidant, and antimicrobial activities, and decrease systolic blood pressure). Furthermore, it can optimize the fermentation process, produce or maintain compounds of interest (bacteriocin, oligosaccharides, peptides, phenolic compounds, flavonoids), improve bioactivity (vitamin, aglycones, calcium), and sensory characteristics. Applying emerging technologies to prebiotic products did not result in prebiotic degradation. Still, it contributed to higher concentrations of bioactive compounds (citric and ascorbic acids, anthocyanin, polyphenols, flavonoids) and health properties (antioxidant activity and inhibition of ACE, α-amylase, and α-glucosidase). Emerging technologies may also be applied to obtain postbiotics with increased health effects. In this way, current studies suggest that emerging food processing technologies enhance the efficiency of probiotics and prebiotics in food. The information provided may help food industries to choose a more suitable technology to process their products and provide a basis for the most used process parameters. Furthermore, the current gaps are discussed. Emerging technologies may be used to process food products resulting in increased probiotic functionality, prebiotic stability, and higher concentrations of bioactive compounds. In addition, they can be used to obtain postbiotic products with improved health effects compared to the conventional heat treatment.

Curcumin-Mediated Sono-Photodynamic Treatment Inactivates Listeria monocytogenes via ROS-Induced Physical Disruption and Oxidative Damage

Sono-photodynamic sterilization technology (SPDT) has become a promising non-thermal food sterilization technique because of its high penetrating power and outstanding microbicidal effects. In this study, Listeria monocytogenes (LMO) was effectively inactivated using curcumin as the sono-photosensitizer activated by ultrasound and blue LED light. The SPDT treatment at optimized conditions yielded a 4-log reduction in LMO CFU. The reactive oxygen species (ROS) production in LMO upon SPDT treatment was subsequently investigated. The results demonstrated SPDT treatment-induced excessive ROS generation led to bacterial cell deformation and membrane rupture, as revealed by the scanning electron microscope (SEM) and cytoplasmic material leakage. Moreover, agarose gel electrophoresis and SDS-PAGE further revealed that SPDT also triggered bacterial genomic DNA cleavage and protein degradation in LMO, thus inducing bacterial apoptosis-like events, such as membrane depolarization.

Prevention of Enzymatic Browning by Natural Extracts and Genome-Editing: A Review on Recent Progress

Fresh fruits and vegetable products are easily perishable during postharvest handling due to enzymatic browning reactions. This phenomenon has contributed to a significant loss of food quality and appearance. Thus, a safe and effective alternative method from natural sources is needed to tackle enzymatic browning prevention. The capabilities of natural anti-browning agents derived from plant- and animal-based resources in inhibiting enzymatic activity have been demonstrated in the literature. Some also possess strong antioxidants properties. This review aims to summarize a recent investigation regarding the use of natural anti-browning extracts from different sources for controlling the browning. The potential applications of genome-editing in preventing browning activity and improving postharvest quality is also discussed. Moreover, the patents on the anti-browning extract from natural sources is also presented in this review. The information reviewed here could provide new insights, contributing to the development of natural anti-browning extracts and genome-editing techniques for the prevention of food browning.

Microbial Inactivation Property of Pulsed Corona Discharge Plasma and Its Effect on Chilled Pork Preservation

Although plasma, especially atmospheric plasma generated by corona discharge, has been proven to be effective in sterilization and food preservation, its disinfection mechanism on chilled pork is poorly understood. In this research, the bactericidal and preservation effect of corona discharge plasma (CDP) was investigated. The maximum bactericidal effect was found after 20 kV 4 kHz CDP treatment, with 2.77 log (colony-forming unit [CFU]/g), 2.41 log (CFU/g), and 1.36 log (CFU/g) reduction for Pantoea agglomerans, Serratia liquefaciens, and Kurthia zopfii, respectively, after 10 min of exposure. The efficiency of microbial inactivation was attributed to the increase of ozone, hydrogen peroxide and morphological changes. It was observed that the microbial level and total volatile binding nitrogen value of CDP-treated chilled pork samples were suppressed during storage, whereas the increase of thiobarbituric acid reactive substances value and the changes of color were still worthy of attention. The aim of this study was to explore the effect of pulsed CDP on the inactivation of spoilage microorganism inoculated on the surface of fresh pork. The prospect of this technology in meat preservation industry was also investigated.

Food systems at a watershed: Unlocking the benefits of technology and ecosystem symbioses

The current food systems require change to improve sustainability resilience. Humans need food and food requires natural resources which have been consistently reduced, destroyed, or eliminated during human development, and excessive during the last 50-70 years. Though essential, there has been less of a focus on the inter-relations and inter-dependences of our food supply with and on the world's eco-system and organisms. Integrating evidence for the importance of plants, the microbiota in plants, animals and humans and their reciprocal effects of their interactions on food systems is essential for creating more inclusive strategies for future food systems. This review examines the role of plants, microorganisms, plant-microbial, animal-microbial, and human-microbial interactions, their co-evolution on the food supply and human and eco-systems well-being. It also recognizes the contribution of indigenous knowledge for lasting protection of the land, managing resources and biodiversity and the usefulness of food processing for producing safe, tasty, and nutritious food sustainably. We demonstrate that new targets and priorities for harnessing science and technology for improving food and nutritional security and avoiding environmental degradation and biodiversity loss are urgently needed. For improved long-term sustainability, the benefits of technology and ecosystem interactions must be unlocked.

High-Pressure Processing for Sustainable Food Supply

Sustainable food supply has gained considerable consumer concern due to the high percentage of spoilage microorganisms. Food industries need to expand advanced technologies that can maintain the nutritive content of foods, enhance the bio-availability of bioactive compounds, provide environmental and economic sustainability, and fulfill consumers’ requirements of sensory characteristics. Heat treatment negatively affects food samples’ nutritional and sensory properties as bioactives are sensitive to high-temperature processing. The need arises for non-thermal processes to reduce food losses, and sustainable developments in preservation, nutritional security, and food safety are crucial parameters for the upcoming era. Non-thermal processes have been successfully approved because they increase food quality, reduce water utilization, decrease emissions, improve energy efficiency, assure clean labeling, and utilize by-products from waste food. These processes include pulsed electric field (PEF), sonication, high-pressure processing (HPP), cold plasma, and pulsed light. This review describes the use of HPP in various processes for sustainable food processing. The influence of this technique on microbial, physicochemical, and nutritional properties of foods for sustainable food supply is discussed. This approach also emphasizes the limitations of this emerging technique. HPP has been successfully analyzed to meet the global requirements. A limited global food source must have a balanced approach to the raw content, water, energy, and nutrient content. HPP showed positive results in reducing microbial spoilage and, at the same time, retains the nutritional value. HPP technology meets the essential requirements for sustainable and clean labeled food production. It requires limited resources to produce nutritionally suitable foods for consumers’ health.

High-Pressure Processing vs. Thermal Treatment: Effect on the Stability of Polyphenols in Strawberry and Apple Products

Polyphenols are important bioactive compounds that are affected by processing. The consumer's demand for minimally processed products contributes to the increase in non-thermal technologies such as high-pressure processing (HPP) in the food industry. This review is aimed at critically discussing the positive and negative effects of thermal treatment (TT) and HPP on the stability of different polyphenol families in agro-food products obtained from strawberry and apple, two of the most used fruits in food processing. Our findings show that the phenolic content was affected by processing, fruit type, polyphenol family, and storage conditions (time and temperature) of the final product. To increase shelf life, manufacturers aiming to preserve the natural content of polyphenols need to find the sweet spot between polyphenol stability and product shelf-life since the residual enzyme activity from HPP can affect polyphenols negatively.

Role of Pascalization in Milk Processing and Preservation: A Potential Alternative towards Sustainable Food Processing

Renewed technology has created a demand for foods which are natural in taste, minimally processed, and safe for consumption. Although thermal processing, such as pasteurization and sterilization, effectively limits pathogenic bacteria, it alters the aroma, flavor, and structural properties of milk and milk products. Nonthermal technologies have been used as an alternative to traditional thermal processing technology and have the ability to provide safe and healthy dairy products without affecting their nutritional composition and organoleptic properties. Other than nonthermal technologies, infrared spectroscopy is a nondestructive technique and may also be used for predicting the shelf life and microbial loads in milk. This review explains the role of pascalization or nonthermal techniques such as high-pressure processing (HPP), pulsed electric field (PEF), ultrasound (US), ultraviolet (UV), cold plasma treatment, membrane filtration, micro fluidization, and infrared spectroscopy in milk processing and preservation.

Fresh Mushroom Preservation Techniques

The production and consumption of fresh mushrooms has experienced a significant increase in recent decades. This trend has been driven mainly by their nutritional value and by the presence of bioactive and nutraceutical components that are associated with health benefits, which has led some to consider them a functional food. Mushrooms represent an attractive food for vegetarian and vegan consumers due to their high contents of high-biological-value proteins and vitamin D. However, due to their high respiratory rate, high water content, and lack of a cuticular structure, mushrooms rapidly lose quality and have a short shelf life after harvest, which limits their commercialization in the fresh state. Several traditional preservation methods are used to maintain their quality and extend their shelf life. This article reviews some preservation methods that are commonly used to preserve fresh mushrooms and promising new preservation techniques, highlighting the use of new packaging systems and regulations aimed at the development of more sustainable packaging.

Are They Careful Enough? Testing Consumers' Perception of Alternative Processing Technologies on the Quality of Organic Food

Given the increasing public interest in how ingredients are processed and the growing demand for organic food products, it is critical to understand consumers' expectations about the process-related quality of organic products. Consumers perceive organic food to be nutritious, healthy and either natural or less processed, as they are afraid of the loss of nutritional, organoleptic and sensory properties of the food products. However, alternative food processing technologies might generate healthy and safe food options with nutritional quality properties. Simplified communication schemes might help to overcome this barrier for the consumer. The main objective of this study is to propose a working definition of "careful processing" for organic products and test its consistency through an experiment, while being used to rate different processing methods by consumers. Results show that the proposed definition allows the consumer to consistently rate alternative processing technologies. Consumers tend to score alternative processing technologies such as pulsed electric fields and microwaves as less careful, supporting the idea that organic consumers want as little man-made interference in their food products as possible. Results show that a simple but effective definition of careful processing may help consumers to distinguish more organic food products from conventional ones, no matter which communication scheme is used.

Review of ultrasound combinations with hybrid and innovative techniques for extraction and processing of food and natural products

Ultrasound has a significant effect on the rate of various processes in food, perfume, cosmetic, pharmaceutical, bio-fuel, materials, or fine chemical industries, despite some shortcomings. Combination with other conventional or innovative techniques can overcome these limitations, enhance energy, momentum and mass transfer, and has been successfully demonstrated in many recent studies. Various ultrasound combined hybrid and innovative techniques are systematically summarized in this review for the first time. Ultrasound can be combined with diverse conventional techniques including Soxhlet, Clevenger, enzyme, hydrotropes, ionic liquids, Deep Eutectic Solvents (DES) or Natural Deep Eutectic Solvents (NADES), to enhance mixing and micro-mixing, reduced thermal and concentration gradients, and selective extraction. Moreover, combinations of ultrasound with other innovative techniques such as microwave, extrusion, supercritical fluid, subcritical and pressure liquids, Instant controlled pressure drop (DIC), Pulsed Electric Field (PEF), Ultra-Violet (UV) or Infra-Red (IR) radiations, Counter-current chromatography (CCC), or centrifugal partition chromatographs (CPC) can enable reduced equipment size, faster response to process control, faster start-up, increased production, and elimination of process steps. The theories and applications of these ultrasound combined hybrid and innovative techniques as well as their advantages and limitations are compared, and further perspectives are proposed. This review provides new insights into advances in ultrasound combined techniques and their application at research, educational, and industrial level in modern food and plant-based chemistry.

Recent advances in extraction technologies for recovery of bioactive compounds derived from fruit and vegetable waste peels: A review

Fruits and vegetables are the most important commodities of trade value among horticultural produce. They are utilized as raw or processed, owing to the presence of health-promoting components. Significant quantities of waste are produced during fruits and vegetables processing that are majorly accounted by waste peels (∼90-92%). These wastes, however, are usually exceptionally abundant in bioactive molecules. Retrieving these valuable compounds is a core objective for the valorization of waste peel, besides making them a prevailing source of beneficial additives in food and pharmaceutical industry. The current review is focused on extraction of bioactive compounds derived from fruit and vegetable waste peels and highlights the supreme attractive conventional and non-conventional extraction techniques, such as microwave-assisted, ultrasound assisted, pulsed electric fields, pulsed ohmic heating, pressurized liquid extraction, supercritical fluid extraction, pressurized hot water, high hydrostatic pressure, dielectric barrier discharge plasma extraction, enzyme-assisted extraction and the application of "green" solvents say as well as their synergistic effects that have been applied to recover bioactive from waste peels. Superior yields achieved with non-conventional technologies were identified to be of chief interest, considering direct positive economic consequences. This review also emphasizes leveraging efficient, modern extraction technologies for valorizing abundantly available low-cost waste peel, to achieve economical substitutes, whilst safeguarding the environment and building a circular economy. It is supposed that the findings discussed though this review might be a valuable tool for fruit and vegetable processing industry to imply an economical and effectual sustainable extraction methods, converting waste peel by-product to a high added value functional product.

Metabolomics: An analytical technique for food processing evaluation

This review aimed to retrieve the most recent research with strong impact concerning the application of metabolomics analysis in food processing. The literature reveals the high capacity of this methodology to evaluate chemical and organoleptic transformations that occur during food production. Current and potential applications of metabolomics analysis will be addressed, focusing on process-composition-function relationships. The use of the metabolomics approach to evaluate transformations in foods submitted to minimal processes, heat or cold treatments, drying, fermentation, chemical and enzymatic treatments and processes using innovative technologies will be discussed. Moreover, the main strategies and advantages of metabolomics-based approaches are reviewed, as well as the most used analytical platforms. Overall, metabolomics can be seen as an important tool to support academia and industry on pursuing knowledge about the transformation of raw animal or plant materials into ready-to-eat products.

Life cycle assessment and energy comparison of aseptic ohmic heating and appertization of chopped tomatoes with juice

The energy balance and life cycle assessment (LCA) of ohmic heating and appertization systems for processing of chopped tomatoes with juice (CTwJ) were evaluated. The data included in the study, such as processing conditions, energy consumption, and water use, were experimentally collected. The functional unit was considered to be 1 kg of packaged CTwJ. Six LCA impact assessment methodologies were evaluated for uncertainty analysis of selection of the impact assessment methodology. The energy requirement evaluation showed the highest energy consumption for appertization (156 kWh/t of product). The energy saving of the ohmic heating line compared to the appertization line is 102 kWh/t of the product (or 65% energy saving). The energy efficiencies of the appertization and ohmic heating lines are 25% and 77%, respectively. Regarding the environmental impact, CTwJ processing and packaging by appertization were higher than those of ohmic heating systems. In other words, CTwJ production by the ohmic heating system was more environmentally efficient. The tin production phase was the environmental hotspot in packaged CTwJ production by the appertization system; however, the agricultural phase of production was the hotspot in ohmic heating processing. The uncertainty analysis results indicated that the global warming potential for appertization of 1 kg of packaged CTwJ ranges from 4.13 to 4.44 kg CO₂eq. In addition, the global warming potential of the ohmic heating system ranges from 2.50 to 2.54 kg CO₂eq. This study highlights that ohmic heating presents a great alternative to conventional sterilization methods due to its low environmental impact and high energy efficiency.