Preparation of chitosan-sodium alginate films through layer-by-layer assembly and ferulic acid crosslinking: Film properties, characterization, and formation mechanism

High loading of anthocyanin on chitosan films by acrolein for sensitive monitoring of meat freshness

As a natural pigment, anthocyanins show different colours in a wide pH range and can be used to prepare pH-responsive smart packaging films. However, free anthocyanins have obvious disadvantages, including easy degradation under light and easy migration into foods. This study used acrolein (ACR), a highly reactive β-unsaturated aldehyde, to cross-link anthocyanin and chitosan (CS). This technique enabled loading of up to 26.18 mg/g of anthocyanin on CS, increasing the stability and preventing migration. Furthermore, acrolein substantially enhanced the mechanical strength of the film while reducing its swelling ability, water-vapour transmission and water contact angle. The film exhibited a broad range of colour shifts across pH levels ranging from 2 to 13. In ammonia simulation experiments, the film demonstrated exceptional sensitivity and quick response to volatile ammonia, exhibiting a 48.5 % colour change within 1 min. Pork freshness test also showed that when the total volatile basic nitrogen content is below 15 mg/100 g (indicating meat deterioration), the film undergoes a substantial colour change (SRGB > 40 %). Concurrently, the cross-linked anthocyanins improved the antioxidant and antibacterial activities of the membrane. Therefore, it can be concluded that the CSAP-2 film can detect pork freshness and has great application prospects in the field of smart meat packaging films.

Bis-imidazolium ionic liquid and silver nanoparticles mediated synthesis of alginate hydrogels for bacterial skin infection and wound healing applications

To advance biomedical engineering and enhance its therapeutic and diagnostic capabilities, the development of novel materials that can mimic the complexity of biological tissues is crucial. Hydrogels, with their high water content and biocompatibility, are particularly suitable for a wide range of medical applications. This research explores the synthesis and bioactivity of alginate hydrogels and their crosslinked derivatives within the biomedical field. We synthesized a series of alginate and p-phthaloyl crosslinked alginate films, which were further modified with imidazolium-based bi-ionic liquids and green-synthesized silver nanoparticles (AgNPs). The successful synthesis of these materials was confirmed using techniques such as FTIR, XRD, EDX, UV-Vis, 1H NMR, and SEM. Additionally, their mechanical and thermal properties were assessed under various conditions. The polymers were tested for antibacterial activity against five different bacterial strains, including both gram-negative and gram-positive bacteria. The findings demonstrated that the hydrogel film with ionic liquid and the cross-linked film with AgNPs exhibited significant antibacterial properties with 23 mm and 10 mm zones of inhibition (ZOI) respectively. In vivo, testing on mice models revealed that the alginate cross-linked film incorporated with AgNPs (APC + 10 % AgNPs) film achieved 97 % wound closure by day 7, while the sodium alginate film embedded with bis-imidazolium ionic liquid (SA + 10 % BIL) achieved 93.25 % wound healing by day 9. These results suggest that the p-phthaloyl crosslinked alginate film incorporated with AgNPs holds the potential for effective and rapid wound recovery.

Effects of keto acid crosslinking on the structure and properties of chitosan based casted and hot-pressed films

Crosslinking is one of the most effective ways to enhance the performance of bio-based films, and suitable crosslinking agents are crucial for the enhancement. In this study, four α-ketoacids, namely glyoxylate, pyruvate, oxaloacetate, and α-ketoglutarate were used to crosslink chitosan at room temperature. The effects of crosslinking on the structure and properties of chitosan films were studied, and the reaction mechanism was explored. Fourier Transform Infrared spectroscopy and X-ray Photoelectron Spectroscopy indicated that ion attraction and Schiff base reactions occurred between keto acids and chitosan. Glyoxylate developed the most effective covalent crosslinking with chitosan, whereas α-ketoglutarate had the highest ionic crosslinking ratio. Keto acid crosslinking reduced the orderliness of chitosan, improved the uniformity of the film matrix and increased its UV-blocking capacity. Glyoxylate-crosslinked chitosan film demonstrated excellent tensile strength (160 MPa), water stability (water solubility about 11.71 %), and extremely low oxygen permeability (2.65 × 10-16 cm3·cm/cm-2·s-1· Pa-1). Despite the weakened thermal stability and water barrier property, glyoxylate crosslinking shows great potential for the preparation of high-strength and high‑oxygen-resistance chitosan films. Furthermore, the glyoxylate-crosslinked chitosan film could be produced by hot pressing and performed satisfactorily.

Development and characterization of alginate and chitosan hybrid films for dual administration of neomycin and lidocaine

Wound care is frequently hindered by infections, which prevent recovery and adversely affect patients' quality of life. A prevalent example is the presence of bacteria such as Staphylococcus aureus, which can lead to severe inflammation. This study developed and characterized hybrid films composed of alginate and chitosan, incorporating the antimicrobial agent neomycin and the local anesthetic lidocaine, to be applied as a dressing for wound treatment. The research employed an experimental design to identify the optimal formulation, evaluating aspects such as uniformity, cracking, and consistency of the films. After determining the ideal formulation, the films were evaluated: roughness, moisture absorption, swelling, and thickness. Additionally, advanced analytical techniques such as electron microscopy and spectroscopy were employed to provide a comprehensive characterization of the films. The results indicated that the films maintained good chemical stability after incorporating the drugs, effectively absorbed liquids, and exhibited suitable thickness. Biocompatibility was confirmed through hemolysis and antimicrobial activity tests. The films containing both neomycin and lidocaine exhibited good efficacy against S. aureus, highlighting the enhanced bacterial inhibition when both drugs were present. These hybrid films show promise as dressings, possessing antimicrobial, anesthetic, and biocompatible properties, along with the ability to absorb liquids.

Sustainable Biopolymer Colloids: Advances in Morphology for Enhanced Functionalities

Biobased polymers such as cellulose, chitin/chitosan, starch, alginate, and lignin are making inroads as sustainable, environmentally safe and biodegradable alternatives to synthetic colloidal materials. This perspective summarizes recent developments in preparation techniques, identifies critical barriers, and proposes future directions for improving the performance and applicability of biopolymer colloidal structures. A major focus is the sustainable colloids morphology as a means of introducing functionality without chemical modification. We discuss the strategies for fabrication of four distinct classes of colloidal morphologies from biobased materials: spherical and nonspherical particles, fibers/fibrils, and films. Their preparation methods can be categorized into physical and chemical approaches. Despite advancements in these methods, challenges persist regarding uniformity, scalability, desired properties, and the need to enhance environmental sustainability. Addressing these challenges is essential for facilitating the transition from synthetic polymers to greener, more sustainable, and microplastic-free colloidal alternatives.

Tough, antibacterial, antioxidant, antifogging and washable chitosan/nanocellulose-based edible coatings for grape preservation

This study focused on extracting nanocellulose from food processing waste to create a multi-functional edible coating for preserving grapes. Nanocellulose, in the form of short rods with diameters ranging from 30 to 130 nm, was extracted from soy hulls. Edible coatings were then prepared through an ion cross-linking method. Results revealed that the film surfaces and cross-sections were smooth, flat and pore-free, with monomers cross-linked through hydrogen bonding, ester bonds and electrostatic interactions. Further, the incorporation of soy-hull nanocellulose (2 g) effectively improved the mechanical strength (elongation = 281.03 % and tensile strength = 114.88 MPa), barrier properties and antifogging and antibacterial properties (95.55 %) of SCT composite films. Moreover, compared with the control, the SCT-3 coating can extend the shelf life of grapes to 10 d at 25 °C. This study offers a new perspective on the high-value use of agricultural by-products and development of edible films.

Recent developments in alginate-based nanocomposite coatings and films for biodegradable food packaging applications

Packaging made of plastic harms the environment. Thus, polysaccharide edible films are becoming a popular food packaging solution. Alginate is a biopolymer derived from seaweed that has the potential to create food packaging materials that are environmentally friendly and biodegradable. This article explores the potential use of nanocomposite coatings and films made from alginate as an alternative to petroleum-based polymers in the food industry. Alginate is desirable for food packaging due to its low cost, high nutritional value, renewability, low oxygen permeability, biodegradability, and biocompatibility. This article delves into alginate's history and extraction processes and covers techniques for modifying its physical and chemical properties using blended polymers and additives. Alginate-based coatings and films have been found to improve the mechanical properties and sensory characteristics of various food items and prolong the shelf life of perishable items by regulating oxygen and moisture levels and as a barrier against microbial growth. Further investigation is necessary to maximize the performance of alginate-based polymers in various food industry applications. Future prospects call on advancements in their physicochemical and functional characteristics to increase the acceptability of alginate-based nanocomposite coatings and films for biodegradable food packaging applications.

Preparation of chitosan/lignin nanoparticles-based nanocomposite films with high-performance and improved physicochemical properties for food packaging applications

Chitosan (CH)-based composite films have attracted increasing attention as promising green food packaging materials due to their biodegradability and ease of fabrication. Additionally, lignin (LN) has been widely used as additive for chitosan-based films to improve their physicochemical properties. In this study, a series of composite films made of chitosan nanoparticles (NCH) as a matrix and alkali lignin nanoparticles (LNPs) as functional filler were prepared. The NCH-LNPs composite films exhibited a more uniform appearance and enhanced crystallinity compared to NCH-LN films. The maximum pyrolysis temperature of NCH-LNPs films, determined by TG, reached 309 °C. Moreover, the antioxidant capacity of NCH-LNPs film was 1.5 and 3.4 times higher than those of NCH-LN and NCH films, respectively. The tensile modulus of NCH-LNPs films increased by 8.9 % and 36.5 %, while the tensile strain decreased by 16.0 % and 52.8 % compared to NCH and NCH-LN films, respectively. Finally, the suitability of prepared films for food preservation was studied on grape and cheese samples. The ability of NCH-LNPs films to inhibit lipid peroxidation in cheese was 2 times higher than that of NCH-LN films. These results showed that the improvement of physicochemical properties of NCH-based films by LNPs was significantly higher than that observed with LN.

Development of a multifunctional and sustainable pterostilbene nanoemulsion incorporated chitosan-alginate food packaging film for shiitake mushroom preservation

The pervasive use of petroleum-based food packaging has caused significant ecological damage due to their unsustainability and non-biodegradability. Polysaccharide-based biodegradable materials are promising alternatives, but low hydrophobicity and functional properties limit their practical applications which can be overcome by incorporation of phytochemical(s). Therefore, by leveraging the strong antioxidant and antibacterial potential of pterostilbene (PTB), we have developed PTB nanoemulsion (NE) incorporated chitosan/sodium alginate (CS/SA) film for food packaging applications. The PTBNE was prepared by high pressure homogenization and characterized for particle size distribution and morphology via DLS, TEM and AFM. The PTBNE CS/SA film was developed by solvent casting method and demonstrated improved mechanical, optical, water resistance and oxygen barrier properties as compared to native CS/SA film. The films were characterized via SEM, 3D optical profilometry, FTIR, XRD and TGA analysis to assess morphological and structural variations. Notably, incorporation of PTBNE in CS/SA matrix significantly enhanced the antioxidant and antibacterial potential of film along with biocompatibility in fibroblast cells. The developed PTBNE CS/SA film demonstrated comparable results with polythene in post harvested shiitake mushroom preservation up to 10 days with rapid soil degradation. Overall, the findings suggested that PTBNE CS/SA film can be a promising alternative to conventional petroleum-based packaging materials.

Chitosan-hydroxypropyl methylcellulose and sodium alginate bilayer edible films for chestnut preservation

To address the challenge of preserving fresh chestnuts, chitosan (CS), hydroxypropyl methylcellulose (HPMC), nisin (N), and sodium alginate (SA) were utilized in the preparation of a bilayer edible film named CS-HPMC-N/SA, which was compared to the monolayer films CS-HPMC and CS-HPMC-N. In comparison to the CS-HPMC film, the CS-HPMC-N and CS-HPMC-N/SA films exhibited increased water vapor permeability (WVP), oxygen permeability, and thickness, while transparency, tensile strength (TS), and elongation at break (EAB) were reduced. The bilayer film CS-HPMC-N/SA showed higher WVP, transparency, thickness, and EAB, but lower TS than the monolayer film CS-HPMC-N. The chestnuts coated with CS-HPMC-N/SA showed lower respiratory intensity and decay rate compared to those coated with CS-HPMC and CS-HPMC-N. These results suggested that the bilayer film CS-HPMC-N/SA, containing nisin, has potential as an edible material for preserving fresh chestnuts.

Creating ultra-strong and recyclable green plastics from marine-sourced alginate-chitosan nanowhisker nanocomposites for controlled release urea fertilizer

In response to the pressing environmental challenge posed by petroleum-derived plastics, the development of green plastics derived from all-biomass nanocomposites offers promising solutions. However, conventional nanocomposites often prioritize enhanced stiffness at the expense of flexibility. We introduce sodium alginate (SA)/chitosan nanowhisker (CSW) nanocomposites, derived entirely from marine-sourced all-biomass, to create ultra-strong and flexible green plastics. Through the synergistic interaction between SA and CSW, these nanocomposites demonstrate simultaneous stiffening and toughening, overcoming the traditional trade-off. Two key mechanisms contribute: geometric reinforcement from the needle-like structure of CSW and electrostatic reinforcement at the interface between oppositely charged CSW and SA. Compared to control SA, the SA/CSW nanocomposites exhibit remarkable enhancements in tensile modulus, strength, and stretchability, by 49%, 85%, and 55%, respectively (7.6 GPa, 223.3 MPa, 14.7%). Cellulose nanocrystals, serving as a control, only stiffen the nanocomposites, adhering to the typical trade-off. Biodegradability in compost can be tailored based on the type of nanofillers. Due to the water resistance of CSW, SA/CSW nanocomposites are proven effective for the controlled release of urea fertilizer in agricultural applications. With recyclability and superior mechanical properties, these marine-sourced green plastics offer a sustainable alternative to conventional plastics, promising significant impact in the eco-plastic industry.

Recent advances in research on biomass-based food packaging film materials

Although traditional petroleum-based packaging materials pose environmental problems, biodegradable packaging materials have attracted extensive attention from research and industry for their environmentally friendly properties. Bio-based films, as an alternative to petroleum-based packaging films, demonstrate their significant advantages in terms of environmental friendliness and resource sustainability. This paper provides an insight into the development of biomass food packaging films such as cellulose, starch, chitosan, and gelatine, including their properties, methods of preparation (e.g., solution casting, extrusion blow molding, layer-by-layer assembly, and electrostatic spinning), and applications in food packaging. Through these preparation methods, the paper analyzes how the properties of the films can be effectively tuned and optimized to meet specific packaging needs. It was found that biomass film materials for food packaging not only possess functional properties such as antimicrobial, preservation, and indication, but also that their continued material innovation and technological improvements offer promising prospects for their use in commercial applications. These advances could help advance the global sustainable development goals, while showing great potential for improving food safety and extending shelf life. Future research will further explore new functions and applications of biomass films, providing additional solutions for environmental protection and sustainability.

A response surface methodology study on the development of pH-sensitive wound dressings using Rhodamine B-loaded chitosan nanoparticles and sodium alginate-based films

Purpose

This study aimed to develop an innovative, intelligent wound dressing capable of signaling infections through color changes.

Design/methodology/approach

Using response surface methodology, the Rhodamine B fluorescence colorant was encapsulated within colloidal nanoparticles and integrated into a sodium alginate patch at various concentrations. The physical and chemical characteristics of the nanoparticles and the wound dressing were thoroughly analyzed via dynamic light scattering (DLS), zeta potential measurements, scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR). Additionally, the biodegradability, hydrophilicity, swelling behavior, release kinetics, porosity, mechanical properties, biocompatibility, and infection detection capability of the wound dressing were evaluated.

Findings

The results indicated that the average diameter of the synthesized colloidal nanoparticles was 300 nm before loading with Rhodamine B and increased to 400 nm after loading, with zeta potentials of 52 mV and -6 mV, respectively. The Rhodamine B-loaded wound dressing demonstrated adequate levels of swelling and hydrophilicity. Release studies revealed the gradual release of Rhodamine B at low pH. Cytotoxicity assays confirmed the high biocompatibility of the engineered wound dressing with the L929 cell line. Furthermore, bacterial exposure experiments indicated that the color change was activated in the presence of infection, making it visible under UV-A light.

Originality/value

This research presents a novel approach to wound care by developing a smart wound dressing that can detect infections via color changes. These findings underscore the potential of this innovative wound dressing to improve infection management in clinical settings through its responsive and biocompatible design.

Polysaccharide-Based Packaging Coatings and Films with Phenolic Compounds in Preservation of Fruits and Vegetables-A Review

Considerable interest has emerged in developing biodegradable food packaging materials derived from polysaccharides. Phenolic compounds serve as natural bioactive substances with a range of functional properties. Various phenolic compounds have been incorporated into polysaccharide-based films and coatings for food packaging, thereby enhancing product shelf life by mitigating quality degradation due to oxidation and microbial growth. This review offers a comprehensive overview of the current state of polysaccharide-based active films and coatings enriched with phenolic compounds for preserving fruits and vegetables. The different approaches for the addition of phenols to polysaccharides-based packaging materials are discussed. The modifications in film properties resulting from incorporating polyphenols are systematically characterized. Then, the application of these composite materials as protectants and intelligent packaging in fruit and vegetables preservation is highlighted. In future, several points, such as the preservative mechanism, safety evaluation, and combination with other techniques along the whole supply chain could be considered to design polyphenol-polysaccharides packaging more in line with actual production needs.

Characterization of corn starch/chitosan composite films incorporated with amino-, carboxyl-，and hydroxyl-terminated hyperbranched dendrimers: A comparative study

Bio-based materials are gaining traction as sustainable plastic replacements, but their performance in terms of mechanics, antibacterial action, and water resistance is often subpar. Our research sought to enhance these attributes by integrating nanoscale dendrimers into a starch/chitosan (SC) matrix. We introduced three varieties of dendrimers-amino-, carboxyl-, and hydroxyl-terminated-at a modest 2.5 % w/w concentration to fabricate NSC, CSC, and HSC films. Comprehensive analyses revealed that the dendrimers fostered intermolecular interactions, prompting an order-disorder shift in the matrix. This interaction textured the film surface and bolstered its thickness, opacity, and tensile strength. The HSC films achieved the highest tensile strength (9.96 MPa) and substantial elongation (254.30 %), attributed to their more disordered structure. The HSC films also showcased enhanced thermal stability and reduced moisture absorption. Notably, NSC films exhibited excellent antibacterial effects against S. aureus and E. coli. The performance improvement of CSC film is mediocre. This study underscores the promise of dendrimer-fortified SC films in the realm of biodegradable materials.

High-flexible chitosan-based composite membrane with multi-layer biopolymer coatings for anti-bacterial drug delivery and wound healing

Flexible chitosan-based membranes were prepared by casting/solvent evaporation method using chitosan flocks as raw material. To improve mechanical and biological properties, chitosan microspheres (CMs) were prepared and integrated to form the composite membranes. Two different anti-bacterial drugs, e.g., tetracycline hydrochloride (TH) and silver sulfadiazine (AgSD), were loaded into the CMs and composite membranes to enhance their anti-bacterial properties. Furthermore, composite membranes were alternately coated by multi-layers of oxidized alginate (OAlg) and carboxymethyl chitosan (CMCS) via the layer-by-layer self-assembly and Schiff-base cross-linking. Our results demonstrated that the microspheres and multi-layer coatings could improve the swelling, water vapor transmission and hydrophilicity of the composite membranes. The chitosan microspheres and multi-layer coatings increased the tensile strength and decreased the elongation at the break of the membranes. Our composite membrane had better mechanical properties, slow drug release, anti-bacterial properties, which could promote cell proliferation. This composite membrane has great application potential in inhibiting bacterial infection and promoting wound regeneration.

Cross-linking Arenga pinnata starch and chitosan by citric acid: Structure and properties

In order to improve the processing and digestibility of the Arenga pinnata (Wurmb.) Merr. starch (APS), low concentration citric acid (CA) and chitosan (CS) were used for dual modification. The purpose of this study was to prepare APS and CS complexes with CA, the complexes (CA-CS-APS) physicochemical properties were investigated. The short-range ordered structure (DO), double helix structure (DO) and relative crystallinity (RC) were decreased; CA-CS resulted in the surface roughness of APS, but the particle integrity was preserved; the particle size of CA-CS-APS was increased. Compared with APS, the peak viscosity of CA-CS-APS was decreased from 2534 cP to 27 cP; CA-CS reduced the swelling power of APS, CA3%-CS-APS decreased from 19.00 g/g to 8.17 g/g. The gelatinization enthalpy was decreased after CA-CS modification from 3.25 J/g to 0.55 J/g. CA-CS-APS exhibits higher storage modulus and loss modulus (2067 Pa and 80 Pa). CA-CS significantly improved the anti-digestibility of APS, and the resistant starch (RS) content was increased from 32 % to 39 %. This study provided a simple and effective way to prepare modified starch, which had the potential as food additives or used as a base material for film preparation.

Development and characterization of bilayer chitosan/alginate cling film reinforced with essential oil based nanocomposite for red meat preservation

With a goal to finding suitable alternatives to plastic packaging in the food industry, we developed a multifunctional bio-based active packaging film to enhance the shelf life of red meat. A chitosan/alginate (Chi + Alg) bilayer film was developed through layer-by-layer (LBL) assembly and an active material i.e. lemongrass nanoemulsion with silver nanoparticles-based nanocomposite (NC1) was loaded into the alginate layer to improve the quality of the bio-based film (Chi + Alg + NC1). The Chi + Alg + NC1 film was characterized in terms of its microstructure, mechanical strength, thermal stability, and antimicrobial activity. Scanning electron microscopy (SEM) revealed a film (22.5 ± 1.44 μm thickness) with a smooth and even surface and a cross-sectional structure. The incorporation of NC1 improves the quality of the film by enhancing its mechanical strength and thermal stability. FT-IR spectra showed the successful interaction between chitosan and alginate in the LBL assembly and the incorporation of NC1 in the alginate layer. The red meat preservation test demonstrated that the shelf life improved when the meat was covered with the fabricated bio-based film. The color of the meat was retained for up to 7 days compared to that of the control (Chi alone and Chi + Alg). Additionally, a reduction in the microbial count in the Chi + Alg + NC1 film was observed, corroborating the shelf-life improvement. In addition to its inherent antimicrobial properties, NC1 induced hydrophilic properties to the film, which further aids in its antimicrobial activity against E. coli. These findings suggest that Chi + Alg + NC1 film could be a potent alternative to plastic packaging and can be used as a cling film to prolong the shelf life of red meat.

Strong, tough self-healing multi-functional sodium alginate-based edible composite coating for banana preservation

Edible coatings are a new green technology for preventing the rotting of fruits and extending their shelf lives. However, during storage, respiratory processes can generate large amounts of water, causing the dissolution of these coating. Furthermore, these coating can be mechanically damaged. Therefore, the development of strong, tough, waterproof and self-healing edible coatings is highly desirable. Herein, gluconolactone was slowly oxidized to generate gluconic acid, which was further used to protonate amino groups in wheat gluten (WG), forming strong electrostatic interactions, hydrogen bonds and ester bonds between soy hull nanocellulose (SHNC) and sodium alginate (SA). The introduction of WG and SHNC improved the mechanical strength, hydrophobicity and water retention of the composite film from 28 MPa, 33.2° ± 1.18° and 19.43° ± 0.83° to 60 MPa, 45.13° ± 1.53° and 41.47° ± 0.96°, respectively. Further, the composite film exhibited excellent self-healing, UV resistance and gas-barrier properties. Banana preservation experiments showed that at 25 °C and 50 % RH, the composite coating effectively slowed the mass loss and softening of bananas, delayed the browning of banana peels and ripening of fruit pulp, and extended the shelf life of bananas to 7 days. Therefore, this study provides a new perspective for the preparation of a new, strong, tough, waterproof and self-healing multi-functional edible coating with high potential for the preservation of perishable fruits.

Preparation, structural characterization, and antioxidant activity of polysaccharide chitosan films from Porphyra haitanensis

Porphyra haitanensis polysaccharide-chitosan (PHP-CS) films were prepared by combining PHP and CS used the casting method with CaCl2; the structure, and physical and chemical properties of the film were studied by rheometry, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TG), light transmittance, scanning electron microscopy (SEM) and other means. The results indicated that the tensile strength of the PHP-CS film after formation was 5.63 ± 0.11 MPa, which was due to the interaction between the negative group in PHP and the positive group of CS under the action of hydrogen bonding and van der Waals forces. XRD and SEM results showed that there was a crystal structure in PHP-CS films, which was due to the combination of sulfuric acid group, amino group of CS and CaCl2 in PHP. Importantly, PHP-CS films had strong UV-blocking properties and high thermal stability. In addition, PHP-CS films had stronger oxidation resistance than PHP and CS. Therefore, PHP-CS film has wide application potential in food preservation and packaging.

Preparation of citric acid cross-linked chitosan quaternary phosphonium/polyvinyl alcohol composite film and its application in strawberry preservation

Chitosan quaternary phosphine salts (NPCS) were synthesized with enhanced antimicrobial properties using a two-step method. Composite films (CNSP) were prepared by incorporating NPCS and polyvinyl alcohol (PVA) as the base material, citric acid as the crosslinker and functional additive, exhibiting antibacterial and UV-blocking properties. The composite film showed a maximum tensile strength of 20.4 MPa, an elongation at break of 677%, and a UV light barrier transmittance of 70%. Application of these composite membranes in preserving strawberries demonstrated effectiveness in maintaining freshness by preventing water loss, inhibiting microbial growth, and extending shelf life. In addition, the composite film demonstrated biosafety. These results indicate that CNSP composite films holds significant promise for safe and sustainable food packaging applications.

Gelatin-Sodium Alginate Hydrogels Cross-Linked by Squaric Acid and Dialdehyde Starch as a Potential Bio-Ink

Hydrogels as biomaterials possess appropriate physicochemical and mechanical properties that enable the formation of a three-dimensional, stable structure used in tissue engineering and 3D printing. The integrity of the hydrogel composition is due to the presence of covalent or noncovalent cross-linking bonds. Using various cross-linking methods and agents is crucial for adjusting the properties of the hydrogel to specific biomedical applications, e.g., for direct bioprinting. The research subject was mixtures of gel-forming polymers: sodium alginate and gelatin. The polymers were cross-linked ionically with the addition of CaCl2 solutions of various concentrations (10%, 5%, 2.5%, and 1%) and covalently using squaric acid (SQ) and dialdehyde starch (DAS). Initially, the polymer mixture's composition and the hydrogel cross-linking procedure were determined. The obtained materials were characterized by mechanical property tests, swelling degree, FTIR, SEM, thermal analysis, and biological research. It was found that the tensile strength of hydrogels cross-linked with 1% and 2.5% CaCl2 solutions was higher than after using a 10% solution (130 kPa and 80 kPa, respectively), and at the same time, the elongation at break increased (to 75%), and the stiffness decreased (Young Modulus is 169 kPa and 104 kPa, respectively). Moreover, lowering the concentration of the CaCl2 solution from 10% to 1% reduced the final material's toxicity. The hydrogels cross-linked with 1% CaCl2 showed lower degradation temperatures and higher weight losses than those cross-linked with 2.5% CaCl2 and therefore were less thermally stable. Additional cross-linking using SQ and DAS had only a minor effect on the strength of the hydrogels, but especially the use of 1% DAS increased the material's elasticity. All tested hydrogels possess a 3D porous structure, with pores of irregular shape and heterogenic size, and their swelling degree initially increased sharply to the value of approx. 1000% during the first 6 h, and finally, it stabilized at a level of 1200-1600% after 24 h. The viscosity of 6% gelatin and 2% alginate solutions with and without cross-linking agents was similar, and they were only slightly shear-thinning. It was concluded that a mixture containing 2% sodium alginate and 6% gelatin presented optimal properties after gel formation and lowering the concentration of the CaCl2 solution to 1% improved the hydrogel's biocompatibility and positively influenced the cross-linking efficiency. Moreover, chemical cross-linking by DAS or SQ additionally improved the final hydrogel's properties and the mixture's printability. In conclusion, among the tested systems, the cross-linking of 6% gelatin-2% alginate mixtures by 1% DAS addition and 1% CaCl2 solution is optimal for tissue engineering applications and potentially suitable for 3D printing.

Modulating the Properties of Brown Alga Alginate-Based Fibers Using Natural Cross-Linkers for Sustainable Textile and Fashion Applications

Seaweed-derived alginate shows promise in the textile industry as a sustainable alternative to synthetic and natural materials. However, challenges arise due to its low mechanical strength. We addressed this limitation by sustainably extracting alginates from European brown algae and employing novel manufacturing methods. Using natural cross-linkers, such as chitosan, ferulic acid, and citric acid, we have successfully modulated the mechanical properties of alginate fibers. Mechanical properties of ferulic acid and citric acid-cross-linked alginate solutions were spinnable, producing fibers with a diameter of 73-75 μm. Ferulic acid cross-linked alginate fibers exhibited stiffness, with a tensile strength of 52.97 MPa and a strain percentage of 20.77, mechanical properties comparable to those of wool, polyester, and rayon. In contrast, citric acid-cross-linked fibers showed partial elasticity, with a tensile strength of 14.35 MPa and a strain percentage of 45.53, comparable to those of nylon. This ability to control the mechanical properties of seaweed-derived fibers represents a significant advancement for their application in sustainable textiles and the fashion industry.

Immobilization of biosynthesized gallium nanoparticles in Polyvinylpyrrolidone/Sodium alginate films: Potent bactericidal protection against food spoilage bacteria

The increasing threat of spoilage bacterial infections, driven by the resistance of bacteria to many antimicrobial treatments, is a significant worldwide public health problem, especially concerning food preservation. To tackle these difficulties, this research investigates the possibility of using packaging sheets that include antimicrobial agents and increasing the prolonged storage time by preventing the bioburden of foodborne pathogens. This approach uses metal nanoparticles' ability to prevent harmful bacteria that cause food spoiling. Gallium nanoparticles (GaNPs) were created using a water-based extract from Andrographis paniculata leaves as a bioreducing agent. The GaNPs were added to a film made of sodium alginate (SA) and polyvinylpyrrolidone (PVP). The study showed that incorporating GaNPs into polymer films resulted in films with a desirable contact angle and decreased water vapor permeability. Significantly, the developed films demonstrated increased efficiency against E.coli O157 compared to other species. Also, it exhibited increased vulnerability to bacterial strains at the biofilm stage, surpassing PVP-SA/GaNPs-0. Remarkably, the toxicity tests showed that the films exhibited no cytotoxicity. Overall, the films indicated their potential for avoiding bacterial bioburden, prolonging the shelf life of perishable products, and contributing to diverse antimicrobial applications in the food industry.

Seaweed-based biopolymers for food packaging: A sustainable approach for a cleaner tomorrow

With the increasing environmental and health consequences of uncontrolled plastic use, the scientific community is progressively gravitating toward biodegradable and ecofriendly packaging alternatives. Seaweed polysaccharides have attracted attention recently because of their biodegradability, nontoxicity, antioxidant properties, and superior film-forming ability. However, it has some limitations for packaging applications, such as low tensile strength, water solubility, and only modest antimicrobial properties. The incorporation of biopolymers, nanoparticles, or organic active ingredients enhances these characteristics. This review encapsulates the contemporary research landscape pivoting around the role of seaweed polysaccharides in the development of bioplastics, active packaging solutions, edible films, and protective coatings. A meticulous collation of existing literature dissects the myriad food application avenues for these marine biopolymers, emphasizing their multifaceted physical, mechanical, thermal, and functional attributes, including antimicrobial and antioxidant. A key facet of this review spotlights environmental ramifications by focusing on their biodegradability, reinforcing their potential as a beacon of sustainable innovation. This article delves into the prevalent challenges that stymie large-scale adoption and commercialization of seaweed-centric packaging, offering a comprehensive perspective on this burgeoning domain.

Development of apple pectin/soy protein isolate-based edible films containing punicalagin for strawberry preservation

In this study, we developed punicalagin-loaded antimicrobial films based on soy protein isolate (SPI) and apple pectin (AP). The AP was derived from apple pomace waste while the punicalagin was obtained from pomegranate peel. Punicalagin was identified to exist in both α- and β-isomers, with the β-type being predominant. The composite films were characterized using scanning electron microscopy, Fourier transformed infrared spectroscopy, X-ray diffraction, and thermogravimetric analysis. Our results demonstrated that the incorporation of AP significantly enhanced the mechanical strength, heat resistance, and barrier properties of the films. Moreover, the composite films integrated with punicalagin exhibited excellent antimicrobial activities against Staphylococcus aureus (with a minimum bactericidal concentration value of 0.25 %), Escherichia coli (with a minimum bactericidal concentration value of 0.50 %), and Aspergillus niger. Finally, these antimicrobial film solutions were tested as coatings on strawberries and found to have significantly better effects on reducing weight loss, improving shelf-life, and maintaining the freshness of strawberries compared to coatings without punicalagin. The results indicate that antimicrobial coatings loaded with punicalagin hold great promise as multifunctional active packaging materials for fruit preservation.

Rapid in situ formation of κ-carrageenan-carboxymethyl chitosan-kaolin clay hydrogel films enriched with arbutin for enhanced preservation of cherry tomatoes

Food waste resulting from perishable fruits and vegetables, coupled with the utilization of non-renewable petroleum-based packaging materials, presents pressing challenges demanding resolution. This study addresses these critical issues through the innovative development of a biodegradable functional plastic wrap. Specifically, the proposed solution involves the creation of a κ-carrageenan/carboxymethyl chitosan/arbutin/kaolin clay composite film. This film, capable of rapid in-situ formation on the surfaces of perishable fruits, adeptly conforms to their distinct shapes. The incorporation of kaolin clay in the composite film plays a pivotal role in mitigating water vapor and oxygen permeability, concurrently bolstering water resistance. Accordingly, tensile strength of the composite film experiences a remarkable enhancement, escalating from 20.60 MPa to 34.71 MPa with the incorporation of kaolin clay. The composite film proves its efficacy by preserving cherry tomatoes for an extended period of 9 days at 28 °C through the deliberate delay of fruit ripening, respiration, dehydration and microbial invasion. Crucially, the economic viability of the raw materials utilized in the film, coupled with the expeditious and straightforward preparation method, underscores the practicality of this innovative approach. This study thus introduces an easy and sustainable method for preserving perishable fruits, offering a cost-effective and efficient alternative to petroleum-based packaging materials.

Polyelectrolyte complex formation of alginate and chito oligosaccharide is influenced by their proportion and alginate molecular weight

Sodium alginate (SA) and chito oligosaccharide (COS) are widely used food additives in the food industry, and exploring their interaction to form polyelectrolyte complexes (PECs) may provide insights into food development. In the present study, the effects of viscosity-average molecular weight (Mv) and relative amounts of SA on the formation of sodium alginate/chito oligosaccharide polyelectrolyte (SCP) complexes were investigated. The results showed that the electrostatic interaction between -COOH and -NH2 and the hydrogen bonding between OH, were attributed to the formation of the SCP complexes. Then the formation and properties of SCP complexes were greatly dependent on the Mv and the relative amount of SA. SA with Mv of ≥2.16 × 106 Da could form spherical SCP complexes, while the SA/COS ratio (w/w) ≥ 0.8 was not conducive to the formation of SCP complexes. Moreover, the SCP complexes were more stable in the gastric environment than in the intestinal condition. In addition, 1.73 × 107 Da was the optimal Mv of SA for SCP complexes formation. This study contributed to a comprehensive understanding of the interaction between SA and COS, and shed light on the potential application of SA and COS formulation to develop new food products.

Fabrication and characterization of unique sustain modified chitosan nanoparticles for biomedical applications

Chitosan (CS) is a biopolymer that offers a wide range in biomedical applications due to its biocompatibility, biodegradability, low toxicity and antimicrobial activity. Syringaldehyde (1) is a naturally occurring organic compound characterized by its use in multiple fields such as pharmaceuticals, food, cosmetics, textiles and biological applications. Herein, development of chitosan derivative with physicochemical and anticancer properties via Schiff base formation from the reaction of chitosan with sustainable eco-friendly syringaldehyde yielded the (CS-1) derivative. Moreover, in the presence of polyethylene glycol diglycidyl ether (PEGDGE) or sodium tripolyphosphate (TPP) as crosslinkers gave chitosan derivatives (CS-2) and (CS-3NPs) respectively. The chemical structures of the new chitosan derivatives were confirmed using different tools. (CS-3NPs) nanoparticle showed improvement in crystallinity, and (CS-2) derivative revealed the highest thermal stability compared to virgin chitosan. The cytotoxicity activity of chitosan and its derivatives were evaluated against HeLa (human cervical carcinoma) and HEp-2 (Human Larynx carcinoma) cell lines. The highest cytotoxicity activity was exhibited by (CS-3NPs) compared to virgin chitosan against HeLa cell growth inhibition and apoptosis of 90.38 ± 1.46% and 30.3% respectively and IC50 of 108.01 ± 3.94 µg/ml. From the above results, it can be concluded that chitosan nanoparticle (CS-3NPs) has good therapeutic value as a potential antitumor agent against the HeLa cancer cell line.

Fabrication and characterization of a new eco-friendly sulfonamide-chitosan derivative with enhanced antimicrobial and selective cytotoxicity properties

Chitosan (CH) exhibits low antimicrobial activity. This study addresses this issue by modifying the chitosan with a sulfonamide derivative, 3-(4-(N,N-dimethylsulfonyl)phenyl)acrylic acid. The structure of the sulfonamide-chitosan derivative (DMS-CH) was confirmed using Fourier transform infrared spectroscopy and Nuclear magnetic resonance. The results of scanning electron microscopy, thermal gravimetric analysis, and X-ray diffraction indicated that the morphology changed to a porous nature, the thermal stability decreased, and the crystallinity increased in the DMS-CH derivative compared to chitosan, respectively. The degree of substitution was calculated from the elemental analysis data and was found to be moderate (42%). The modified chitosan exhibited enhanced antimicrobial properties at low concentrations, with a minimum inhibitory concentration (MIC) of 50 µg/mL observed for B. subtilis and P. aeruginosa, and a value of 25 µg/mL for S. aureus, E. coli, and C. albicans. In the case of native chitosan, the MIC values doubled or more, with 50 µg/mL recorded for E. coli and C. albicans and 100 μg/mL recorded for B. subtilis, S. aureus, and P. aeruginosa. Furthermore, toxicological examinations conducted on MCF-7 (breast adenocarcinoma) cell lines demonstrated that DMS-CH exhibited greater toxicity (IC50 = 225.47 μg/mL) than pure CH, while still maintaining significant safety limits against normal lung fibroblasts (WI-38). Collectively, these results suggest the potential use of the newly modified chitosan in biomedical applications.

Enhancing the bioavailability and antioxidant activity of natamycin E235-ferulic acid loaded polyethylene glycol/carboxy methyl cellulose films as anti-microbial packaging for food application

This study investigated the development of biodegradable films made from a combination of polyethylene glycol (PEG), carboxymethyl cellulose (CMC) and mixtures from natamycin and ferulic acid. The films were characterized for their surface microstructure, antioxidant activity, thermal stability, mechanical properties, permeability and antifungal/bacterial activity. The addition of natamycin and ferulic acid to the film matrix enhanced antioxidant activity, thermal stability, antimicrobial activity, reduced the water vapor permeability (WVP) to 1.083 × 10-10 g × m-1s-1Pa-1, imparted opaque color and increased opacity up to 3.131 A mm-1. The attendance of natamycin and ferulic acid inside films created a clear roughness shape with agglomerates on the surface of films and caused a clear inhibition zone for Aspergillus niger, E. coli and C. botulinum. The utilization of PG/CMC/N-F packaging material on Ras cheese had a noticeable effect, resulting in a slight decrease in moisture content from 34.23 to 29.17 %. Additionally, it helped maintain the titrable acidity within the range of 0.99 % to 1.11 % and the force required for puncture from 0.035 to 0.052 N with non-significant differences. Importantly, these changes did not significantly affect the sensory qualities of Ras cheese during the storage period.

Moisture loss inhibition with biopolymer films for preservation of fruits and vegetables: A review

In cold storage, fruits and vegetables still keep a low respiratory rate. Although cold storage is beneficial to maintain the quality of some fruits and vegetables, several factors (temperature and humidity fluctuations, heat inflow, air velocity, light, etc.) will accelerate moisture loss. Biopolymer films have attracted great attention for fruits and vegetables preservation because of their biodegradable and barrier properties. However, there is still a certain amount of water transfer occurring between storage environment/biopolymer films/fruits and vegetables (EFF). The effect of biopolymer films to inhibit moisture loss of fruits and vegetables and the water transfer mechanism in EFF system need to be studied systematically. Therefore, the moisture loss of fruits and vegetables, crucial properties, major components, fabrication methods, and formation mechanisms of biopolymer films were reviewed. Further, this study highlights the EFF system, responses of fruits and vegetables, and water transfer in EFF. This work aims to clarify the characteristics of EFF members, their influence on each other, and water transfer, which is conducive to improving the preservation efficiency of fruits and vegetables purposefully in future studies. In addition, the prospects of studies in EFF systems are shown.

Development of CO2-sensitive antimicrobial bilayer films based on gellan gum and sodium alginate/sodium carboxymethyl cellulose and its application in strawberries

To effectively extend the shelf life of fruits meanwhile facilitating consumers to judge their freshness, in this work, a double-layer multifunctional film combining CO2 sensitivity and antibacterial properties was successfully prepared by adding methyl red (MR), bromothymol blue (BTB) into gellan gum (GG) as the sensing inner layer, and doping tannic acid (TA) into sodium alginate with sodium carboxymethyl cellulose (CMC) as the antimicrobial outer layer, which was applied to the freshness indication of strawberries. Microscopic morphology and spectral analysis demonstrated that the bi-layer films were fabricated successfully. The mechanical characteristics, thermal stability, water vapor resistance, and antibacterial capabilities of the bilayer films improved as TA concentration rose. They exhibited noticeable color changes at pH = 2-10 and different concentrations of CO2. Application of the prepared films to strawberries revealed that the GG-MB@SC-6%TA film performed most favorably under 4 °C storage conditions, not only monitoring strawberry freshness but also retaining high soluble solids and titratable acidity, resulting in a slight decrease in hardness and weight loss. Therefore, taking into account all of the physical-functional characteristics, the GG-MB@6%TA film has a broad application prospect for intelligent food packaging.

Natural polysaccharides and proteins-based films for potential food packaging and mulch applications: A review

Conventional nondegradable packaging and mulch films, after reaching the end of their use, become a major source of waste and are primarily disposed of in landfills. Accumulation of non-degradable film residues in the soil leads to diminished soil fertility, reduced crop yield, and can potentially affect humans. Application of degradable films is still limited due to the high cost, poor mechanical, and gas barrier properties of current biobased synthetic polymers. In this respect, natural polysaccharides and proteins can offer potential solutions. Having versatile functional groups, three-dimensional network structures, biodegradability, ease of processing, and the potential for surface modifications make polysaccharides and proteins excellent candidates for quality films. Besides, their low-cost availability as industrial waste/byproducts makes them cost-effective alternatives. This review paper covers the performance properties, cost assessment, and in-depth analysis of macromolecular structures of some natural polysaccharides and proteins-based films that have great potential for packaging and mulch applications. Proper dissolution of biopolymers to improve molecular interactions and entanglement, and establishment of crosslinkages to form an ordered and cohesive polymeric structure can help to obtain films with good properties. Simple aqueous-based film formulation techniques and utilization of waste/byproducts can stimulate the adoption of affordable biobased films on a large-scale.

Progress on green crosslinking of polysaccharide hydrogels for drug delivery and tissue engineering applications

Natural polysaccharides are being studied for their biocompatibility, biodegradability, low toxicity, and low cost in the fabrication of various hydrogel devices. However, due to their insufficient physicochemical and mechanical qualities, polysaccharide hydrogels alone are not acceptable for biological applications. Various synthetic crosslinkers have been tested to overcome the drawbacks of standalone polysaccharide hydrogels; however, the presence of toxic residual crosslinkers, the generation of toxic by-products following biodegradation, and the requirement of toxic organic solvents for processing pose challenges in achieving the desired non-toxic biomaterials. Natural crosslinkers such as citric acid, tannic acid, vanillin, gallic acid, ferulic acid, proanthocyanidins, phytic acid, squaric acid, and epigallocatechin have been used to generate polysaccharide-based hydrogels in recent years. Various polysaccharides, including cellulose, alginate, pectin, hyaluronic acid, and chitosan, have been hydrogelized and investigated for their potential in drug delivery and tissue engineering applications using natural crosslinkers. We attempted to provide an overview of the synthesis of polysaccharide-based hydrogel systems (films, complex nanoparticles, microspheres, and porous scaffolds) based on green crosslinkers, as well as a description of the mechanism of crosslinking and properties with a special emphasis on drug delivery, and tissue engineering applications.

Modified polysaccharides for food packaging applications: A review

Development of new food packaging materials is crucial to reduce the use of single-use plastics and to limit their destructive impact on the environment. Polysaccharides provide an alternative solution to this problem. This paper summarizes and discusses recent research results on the potential of modifying polysaccharides as materials for film and coating applications. Modifications of polysaccharides significantly affect their properties, as well as their application usability. Although modifications of biopolymers for packaging applications have been widely studied, polysaccharides have attracted little attention despite being a prospective, environmentally friendly, and economically viable packaging alternative. Therefore, this paper discusses approaches to the development of biodegradable, polysaccharide-based food packaging materials and focuses on modifications of four polysaccharides, such as starch, chitosan, sodium alginate and cellulose. In addition, these modifications are presented not only in terms of the selected polysaccharide, but also in terms of specific properties, i.e. hydrophilic, barrier and mechanical properties, of polysaccharides. Such a presentation of results makes it much easier to select the modification method to improve the unsatisfactory properties of the material. Moreover, very often it happens that the applied modification improves one and worsens another property, which is also presented in this review.

Chitosan/konjac glucomannan bilayer films: Physical, structural, and thermal properties

To overcome the limitations of chitosan (CS) and konjac glucomannan (KGM), the bilayer films of CS and KGM were prepared by layer-by-layer (LBL) casting method, and the effects of different mass ratios (i.e., C5: K0, C4:K1, C3:K2, C1:K1, C2:K3, C1:K4, and C0:K5) on the microstructures and physicochemical properties of bilayer films were examined to evaluate their applicability in food packaging. The results revealed that the bilayer films had uniform microstructures. When compared with pure films, the bilayer films displayed lower swelling degrees and water vapor permeability. However, the tensile tests revealed a reduction in the mechanical properties of the bilayer films, which was nonetheless superior to that of the pure KGM film. In addition, the intermolecular interactions between the CS and KGM layers were observed through FTIR and XRD analyses. Finally, TGA and DSC analyses demonstrated a decrease in the thermal stability of the bilayer films. Our cumulative results verified that CS-KGM bilayer films may be a promising material for use in food packaging and further properties of the bilayer films can be supplemented in the future through layer-by-layer modification and the addition of active ingredients.

Recent advances in biomacromolecule-based nanocomposite films for intelligent food packaging- A review

In food packaging, biopolymer films are biodegradable films made from biomacromolecule-based natural materials, while biocomposite films are hybrids of two or more materials, with at least one being biodegradable. Bionanocomposites are different than the earlier ones, as they consist of various nanofillers (both natural and inorganic) in combination with biomacromolecule-based biodegradable materials to make good compostable bionanocomposites. In this regard, a new type of material known as bionanocomposite has been recently introduced to improve the properties and performance of biocomposite films. Bionanocomposites are primarily developed for active packaging, but their use in intelligent packaging is also noteworthy. For example, bionanocomposites developed using a hybrid of anthocyanin and carbon dots as intelligent materials have shown their high pH-sensing properties. The natural nanofillers (like nanocellulose, nanochitosan, nanoliposome, cellulose nanocrystals, cellulose nanofibers, etc.) are being employed to promote the sustainability, degradability and safety of bionanocomposites. Overall, this article comprehensively reviews the latest innovations in bionanocomposite films for intelligent food packaging over the past five years. In addition to packaging aspects, the role of nanofillers, the importance of life cycle assessment (LCA) and risk assessment, associated challenges, and future perspectives of bionanocomposite intelligent films are also discussed.

Postharvest Quality Improvement of Tomato (Solanum lycopersicum L.) Fruit Using a Nanomultilayer Coating Containing Aloe vera

The effectiveness of an alginate/chitosan nanomultilayer coating without (NM) and with Aloe vera liquid fraction (NM+Av) was evaluated on the postharvest quality of tomato fruit at 20 °C and 85% relative humidity (RH) to simulate direct consumption. Both nanomultilayer coatings had comparable effects on firmness and pH values. However, the NM+Av coating significantly reduced weight loss (4.5 ± 0.2%) and molds and yeasts (3.5-4.0 log CFU g-1) compared to uncoated fruit (16.2 ± 1.2% and 8.0 ± 0.0 log CFU g-1, respectively). It notably lowered O2 consumption by 70% and a 52% decrease in CO2 production, inhibiting ethylene synthesis. Visual evaluation confirmed NM+Av's efficacy in preserving the postharvest quality of tomato. The preservation of color, indicated by the Minolta color (a*/b*) values, demonstrated NM+Av's ability to keep the light red stage compared to uncoated fruit. The favorable effects of NM+Av coating on enhancing postharvest quality indicates it as a potential alternative for large-scale tomato fruit preservation.

Formulation and In Vivo Evaluation of Biofilm Loaded with Silver Sulfadiazine for Burn Healing

Infected burned skin is a life-threatening condition, which may lead to sepsis. The aims of this work are to formulate a biofilm composed of silver sulfadiazine (SSD), chitosan (CS), and sodium alginate (SA), and to evaluate its wound-healing effectiveness. A full factorial design was used to formulate different matrix formulations. The prepared biofilm was tested for physicochemical, and in vitro release. The optimized formulation is composed of 0.833% of CS and 0.75% of SA. The release of SSD almost reached 100% after 6 h. The mechanical properties of the optimized formula were reasonable. The antibacterial activity for the optimized biofilm was significantly higher than that of blank biofilm, which is composed of CS and SA, p = 1.53922 × 10-12. Moreover, the in vivo study showed a 75% reduction in wound width when using the formulated SSD biofilm compared to standard marketed cream (57%) and the untreated group (0%).

Influence of blending and layer-by-layer assembly methods on chitosan-gelatin composite films enriched with curcumin nanoemulsion

In this study, gelatin (GE) was composited with chitosan films (CH) and chitosan films incorporated with curcumin nanoemulsion (CH-CNE) through blending and layer-by-layer (LbL) assembly in order to overcome the physical limitations of the chitosan and its incorporated films. Furthermore, the distinctive effects of blending and LbL assembly on the physicochemical parameters of the composite films were assessed. The composite LbL films incorporated with GE exhibited improvement of water vapor barrier, tensile strength, solubility, which contributed to the enhanced antioxidant activity from the single components. By contrast, the composite films of the blending method exhibited greater elongation at break and increased swelling degree. Additionally, the films containing the nanoemulsion exhibited reduced light transmission and increased opacity. The thermal properties indicating the thermal stability and compatibility interactions of the composite films were examined by the glass transition temperature (Tg). Results revealed that the distinctive behavior of the Tg was affected by the compositing method. The LbL films exhibited substantially increased Tg, indicating enhanced thermal stability. The results indicated that the composited films formed via the LbL assembly attained better physicochemical properties and thermal stability, implying higher compatible film than the blending.

Fabrication, performance, and potential environmental impacts of polysaccharide-based food packaging materials incorporated with phytochemicals: A review

Although food packaging preserves food's quality, it unfortunately contributes to global climate change since the considerable carbon emissions associated with its entire life cycle. Polysaccharide-based packaging materials (PPMs) are promising options to preserve foods, potentially helping the food industry reduce its carbon footprint. PPMs incorporated with phytochemicals hold promise to address this critical issue, keep food fresh and prolong the shelf life. However, phytochemicals' health benefits are impacted by their distinct chemical structures thus the phytochemicals-incorporated PPMs generally exhibit differential performances. PPMs must be thoughtfully formulated to possess adequate physicochemical properties to meet commercial standards. Given this, this review first-time provides a comprehensive review of recent advances in the fabrication of phytochemicals incorporated PPMs. The application performances of phytochemicals-incorporated PPMs for preserving foods, as well as the intelligent monitoring of food quality, are thoroughly introduced. The possible associated environmental impacts and scalability challenges for the commercial application of these PPMs are also methodically assessed. This review seeks to provide comprehensive insights into exploring new avenues to achieve a greener and safer food industry via innovative food packaging materials. This is paramount to preserve not only food shelf life but also the environment, facilitating the eco-friendly development of the food industry.

Sodium Trimetaphosphate Crosslinked Starch Films Reinforced with Montmorillonite

Synthetic polymers are the main food packaging material, although they are nonbiodegradable and their recycling process is expensive. A biodegradable, eco-friendly material, with high availability and low cost, such as starch, is a promising solution for the production of films for food packaging. To enhance starch film mechanical and barrier properties, nanoclays have been incorporated within the film matrix. Crosslinking is a well-established method to modify starch properties, but it has not been investigated in combination with nanoclay addition. In the present study, films were developed with starch that was crosslinked through the addition of 5, 15, and 40% wt. sodium trimetaphosphate (STMP) based on dry starch weight. To investigate the interaction between crosslinking and nanoclay addition, montmorillonite (MMT) was added at a 10.5% wt. concentration based on dry starch weight. Experimental data revealed a synergistic effect between STMP crosslinking and MMT addition regarding film thickness, elongation at break, color properties, and opacity. Regarding barrier properties, MMT addition negated the effect of STMP crosslinking, while, in the case of moisture content, it did not alter the effect of STMP crosslinking. Finally, in the case of tensile strength, a synergistic effect followed by a negative interaction was observed. In conclusion, the addition of MMT can potentially enhance, alongside crosslinking, some properties of the films, while other properties are not affected any more than just by crosslinking.

Evaluation of Cytotoxicity of Hyaluronic Acid/Chitosan/Bacterial Cellulose-Based Membrane

Novel wound dressing materials are required to non-cytotoxic with a viable cell ratio of above 92%. Herein, the cytotoxicity of hyaluronic acid/chitosan/bacterial cellulose-based (BC(CS/HA)) membranes are evaluated and compared to that of alginate/chitosan/bacterial cellulose-based (BC(CS/Alg)) membranes was investigated. Multilayer membranes with up to ten CS/HA or CS/Alg layers were prepared using the layer-by-layer (LBL) method. Scanning electron microscopy showed that the diameters of the fibers in the BC(CS/Alg) and BC(CS/HA) membranes were larger than those in a BC membrane. The cytotoxicity was analyzed using BALB-3T3 clone A31 cells (mouse fibroblasts, 1 × 10⁴ cells/well). The BC(CS/HA)₅ and BC(CS/HA)₁₀ membranes exhibited high biocompatibility, with the cell viabilities of 94% and 87% at 5 d, respectively, compared to just 82% for the BC(CS/Alg)₅ and BC(CS/Alg)₁₀ membranes with same numbers of layers. These results suggested that BC(CS/HA)₅ is a promising material for wound dressings.

Algal Phycocolloids: Bioactivities and Pharmaceutical Applications

Seaweeds are abundant sources of diverse bioactive compounds with various properties and mechanisms of action. These compounds offer protective effects, high nutritional value, and numerous health benefits. Seaweeds are versatile natural sources of metabolites applicable in the production of healthy food, pharmaceuticals, cosmetics, and fertilizers. Their biological compounds make them promising sources for biotechnological applications. In nature, hydrocolloids are substances which form a gel in the presence of water. They are employed as gelling agents in food, coatings and dressings in pharmaceuticals, stabilizers in biotechnology, and ingredients in cosmetics. Seaweed hydrocolloids are identified in carrageenan, alginate, and agar. Carrageenan has gained significant attention in pharmaceutical formulations and exhibits diverse pharmaceutical properties. Incorporating carrageenan and natural polymers such as chitosan, starch, cellulose, chitin, and alginate. It holds promise for creating biodegradable materials with biomedical applications. Alginate, a natural polysaccharide, is highly valued for wound dressings due to its unique characteristics, including low toxicity, biodegradability, hydrogel formation, prevention of bacterial infections, and maintenance of a moist environment. Agar is widely used in the biomedical field. This review focuses on analysing the therapeutic applications of carrageenan, alginate, and agar based on research highlighting their potential in developing innovative drug delivery systems using seaweed phycocolloids.

Chitosan-Based Antibacterial Films for Biomedical and Food Applications

Antibacterial chitosan films, versatile and eco-friendly materials, have garnered significant attention in both the food industry and medicine due to their unique properties, including biodegradability, biocompatibility, and antimicrobial activity. This review delves into the various types of chitosan films and their distinct applications. The categories of films discussed span from pure chitosan films to those enhanced with additives such as metal nanoparticles, metal oxide nanoparticles, graphene, fullerene and its derivatives, and plant extracts. Each type of film is examined in terms of its synthesis methods and unique properties, establishing a clear understanding of its potential utility. In the food industry, these films have shown promise in extending shelf life and maintaining food quality. In the medical field, they have been utilized for wound dressings, drug delivery systems, and as antibacterial coatings for medical devices. The review further suggests that the incorporation of different additives can significantly enhance the antibacterial properties of chitosan films. While the potential of antibacterial chitosan films is vast, the review underscores the need for future research focused on optimizing synthesis methods, understanding structure-property relationships, and rigorous evaluation of safety, biocompatibility, and long-term stability in real-world applications.

Biopolymer-Based Sustainable Food Packaging Materials: Challenges, Solutions, and Applications

Biopolymer-based packaging materials have become of greater interest to the world due to their biodegradability, renewability, and biocompatibility. In recent years, numerous biopolymers-such as starch, chitosan, carrageenan, polylactic acid, etc.-have been investigated for their potential application in food packaging. Reinforcement agents such as nanofillers and active agents improve the properties of the biopolymers, making them suitable for active and intelligent packaging. Some of the packaging materials, e.g., cellulose, starch, polylactic acid, and polybutylene adipate terephthalate, are currently used in the packaging industry. The trend of using biopolymers in the packaging industry has increased immensely; therefore, many legislations have been approved by various organizations. This review article describes various challenges and possible solutions associated with food packaging materials. It covers a wide range of biopolymers used in food packaging and the limitations of using them in their pure form. Finally, a SWOT analysis is presented for biopolymers, and the future trends are discussed. Biopolymers are eco-friendly, biodegradable, nontoxic, renewable, and biocompatible alternatives to synthetic packaging materials. Research shows that biopolymer-based packaging materials are of great essence in combined form, and further studies are needed for them to be used as an alternative packaging material.

Preparation of Chitosan/β-Cyclodextrin Composite Membrane and Its Adsorption Mechanism for Proteins

A significant portion of the protein in food waste will contaminate the water. The chitosan/modified β-cyclodextrin (CS/β-CDP) composite membranes were prepared for the adsorption of bovine serum albumin (BSA) in this work to solve the problem of poor adsorption protein performance and easy disintegration by a pure chitosan membrane. A thorough investigation was conducted into the effects of the preparation conditions (the mass ratio of CS and β-CDP, preparation temperature, and glutaraldehyde addition) and adsorption conditions (temperature and pH) on the created CS/β-CDP composite membrane. The physical and chemical properties of pure CS membrane and CS/β-CDP composite membrane were investigated. The results showed that CS/β-CDP composite membrane has better tensile strength, elongation at break, Young's modulus, contact angle properties, and lower swelling degree. The physicochemical and morphological attributes of composite membranes before and after the adsorption of BSA were characterized by SEM, FT-IR, and XRD. The results showed that the CS/β-CDP composite membrane adsorbed BSA by both physical and chemical mechanisms, and the adsorption isotherm, kinetics, and thermodynamic experiments further confirmed its adsorption mechanism. As a result, the CS/β-CDP composite membrane of absorbing BSA was successfully fabricated, demonstrating the potential application prospect in environmental protection.

Development and Characterization of Films with Propolis to Inhibit Mold Contamination in the Dairy Industry

Due to the number of polyphenols with multiple biological activities, propolis has high potential to be used as an active agent in food protective films. Therefore, this study aimed to develop and characterize a sodium alginate film with ethanolic extract of propolis (EEP) for its potential use as protective active packaging against filamentous fungi in ripened cheese. Three different concentrations of EEP were analyzed: 0, 5 and 10% w/v. The films obtained were characterized, assessing thermal and physicochemical properties, as well as the concentration of polyphenols in the EEP and antifungal activity of the active films. The incorporation of EEP in the films generated thermal stability with respect to the loss of mass. Total color values (ΔE) of the films were affected by the incorporation of the different concentrations of EEP, showing a decrease in luminosity (L*) of the films, while the chromatic parameters a* and b* increased in direct proportion to the EEP concentration. Antifungal activity was observed with a fungistatic mode of action, stopping the growth of the fungus in cheeses without development of filamentous molds, thus increasing the shelf life of the ripened cheese under the analytical conditions, over 30 days at room temperature. Overall, EEP can be used to prevent growth and proliferation of spoilage microorganisms in cheese.

The Application of Phenolic Acids in The Obtainment of Packaging Materials Based on Polymers-A Review

This article provides a summarization of present knowledge on the fabrication and characterization of polymeric food packaging materials that can be an alternative to synthetic ones. The review aimed to explore different studies related to the use of phenolic acids as cross-linkers, as well as bioactive additives, to the polymer-based materials upon their application as packaging. This article further discusses additives such as benzoic acid derivatives (sinapic acid, gallic acid, and ellagic acid) and cinnamic acid derivatives (p-coumaric acid, caffeic acid, and ferulic acid). These phenolic acids are mainly used as antibacterial, antifungal, and antioxidant agents. However, their presence also improves the physicochemical properties of materials based on polymers. Future perspectives in polymer food packaging are discussed.