In vitro digestion of sodium alginate/pectin co-encapsulated Lactobacillus bulgaricus and its application in yogurt bilayer beads

Preparation and characterization of multilayered microcapsules of Lactobacillus rhamnosus encapsulated with sodium alginate, hyaluronic acid and carrageenan and their protective effects on the retina

To improve the activity of probiotics during oral delivery and to investigate the protective effects on the retina. In this study, multilayer microcapsules encapsulating Lactobacillus rhamnosus YBT20 (YBT20) were prepared using sodium alginate, carrageenan and hyaluronic acid. Then it was characterized by determining the encapsulation rate, particle size distribution and zeta potential, and the results showed that the encapsulation rate of YBT20 by microcapsules was 68.51 % ~ 93.73 %, and the particle size distribution was between 100 and 1000 nm. Meanwhile, the storage stability and antioxidant properties of YBT20 were increased by 38.09 % and 37.01 %, respectively. Furthermore, the in vitro digestion simulation showed that the microcapsules could effectively improve the cell viability of YBT20 in saliva, gastric juice and intestinal juice, and the maximum release rate of YBT20 was 82.0 %. Lastly, the protective effect of microcapsule preparation on retinal damage induced by high-fat diet and blue light was evaluated in SD female rats. The results showed that microcapsule preparation can improve the oxidative damage of retinal pigment epithelium (RPE) in rats, and inhibit IL-6, IL-8, IL-1β and TNF-α. This study provides valuable theoretical information for effective delivery of probiotics and retinal protection.

Prebiotics empower probiotics with gastrointestinal stress resistance for colon-targeted release to synergistically alleviate colitis

Oral administration of probiotics holds promise for alleviating ulcerative colitis (UC), yet their efficacy is inevitably compromised by the hostile gastrointestinal (GI) environment. Here, we devised a strategy by coating β-glucan (GN) prebiotic onto the surface of Lactobacillus plantarum (Lp) probiotic at the single-cell level (Lp@CGN) based on bioorthogonal chemistry in a layer-by-layer manner. This achieved to form a firm, dense, and multifunctional GN-based "armor" with advances of superior protective properties, colon-targeted degradation, and prebiotic benefits. Under the protection of the prebiotic-based "armor", Lp@CGN exhibited a notable 276-fold increase in the survival rate compared to naïve Lp after exposure to whole GI conditions. Upon reaching the colon, the "armor" was metabolized into short-chain fatty acids (SCFAs) by gut microbiota, facilitating the timely release of Lp within colon, thereby achieving a synergistic treatment effect due to sustained SCFAs generation and Lp liberation. As a result, oral administration of Lp@CGN efficiently realized the alleviation of UC in both preventative and therapeutic models through restoring intestinal mucosal barriers, positively regulating inflammatory cytokines, renovating the dysbiosis of gut microbiota, and promoting SCFAs production. In sum, our strategy marks the reconstruction of probiotics with chemical tools, offering useful insights into powering probiotics for disease treatment.

Encapsulation of Enterococcus faecium in hyaluronic acid/gelatin/sodium alginate/protamine improves cell viability and stability

Probiotics offer significant health benefits, but their survival is often compromised by harsh conditions during food processing. The primary objective of this study was to enhance the viability and stability of Enterococcus faecium 20,420 (Ef-20,420) through physical extrusion and complex coacervation in a composite of hyaluronic acid (HA), gelatin (GL), sodium alginate (SA), and protamine sulfate (PS). The cell viability of Ef-20,420 before and after encapsulation was 8.51 ± 0.09 log CFU/mL and 8.36 ± 0.07 log CFU/mL, respectively, which remained generally stable. The final product can be stored at 4 °C for up to 12 months. The composite microcapsules were determined to be formed by hydrogen bond and electrostatic interaction through different characterization methods. After exposure to SGF, the composite microcapsules showed a viable cell count reduction of only 1.37 ± 0.13 log CFU/mL. With the addition of PS, the sustained release time of the bacteria in SIF was extended by 60 min. Following high-temperature treatment at 80 ± 0.5 °C for 3 min, the protective effect of the composite microcapsules maintaining a viable cell count at 6.58 ± 0.19 log CFU/mL. After 25 days of storage at 4 ± 0.2 °C, the bacterial count in the composite microcapsules decreased from 8.50 ± 0.04 to 7.10 ± 0.12 log CFU/mL. Additionally, the composite microcapsules increased the transmembrane resistance of Caco-2 cells. Therefore, these findings offered new insights for the development of functional probiotic foods.

Enhancing the flavor of plant-based meat analogues using flavor-capturing alginate/β-cyclodextrin hydrogel beads

Lack of flavor is a major disadvantage that hinders the widespread intake of plant-based meat analogues (PMA). Alginate-based hydrogel beads have flavor encapsulation capabilities. However, its low flavor retention rate and high viscosity limit its application in PMA. Therefore, novel alginate hydrogel beads suitable for PMA were formulated by mixing polysaccharides (such as β-cyclodextrin, gum arabic, agar, or κ-carrageenan). The beads and plant-based patties (PP) containing beads were characterized. Results showed that replacing half of the alginate with each polysaccharide decreased the viscosity. These modifications provided the proper thermal properties, size, and microstructure of the beads for application to PP. Particularly, β-cyclodextrin markedly increased the encapsulation efficiency of flavor up to 91.78 %. Adding four types of fabricated beads to each PP improved quality characteristics by reducing cooking loss and maintaining consistent color and texture profiles during 10 days of storage at 4 °C. The principal component analysis using an electronic nose demonstrated that alginate/β-cyclodextrin beads blocked flavor release in PP during the storage period. Sensory evaluation confirmed the maintenance of flavor intensity in the same PP. Collectively, these data suggest that alginate/β-cyclodextrin hydrogel beads could retain flavors and serve as an ingredient for PMA and other plant-based food systems.

Natural Bioactive Compounds Enriched Functional Yogurt: Impact on the Probiotic Bacteria and Its Potential Health Benefits

Recently, there has been a high demand for the development of yogurt-based nutraceuticals and functional medications. This surge is primarily driven by the increasing global need for pharmaceutical and nutraceutical products, arising from widespread nutrient deficiencies and the emergence of various communicable and non-communicable diseases (NCDs), including respiratory infections, cancer, gastrointestinal, diabetes, obesity, and cardiovascular diseases. Probiotic yogurt provides an effective medium for delivering essential nutrients to the human body. Additionally, various prebiotic combinations, such as bioactive compounds from plants, animals, and microbes, can enrich the viability of probiotics, nutritional value, and efficacy. However, the gastric environment can significantly impact the viability of probiotic microorganisms as well as the absorption of nutrients and bioactive molecules. Therefore, utilizing biopolymer-based encapsulation for functional nutrients, metal nanostructures, and medications can improve the bioavailability of these compounds, protect the probiotics from gastric enzymes, increase nutrient and microbial absorption in colonic fluids, and enhance the antioxidant level in the body. This review investigates various methods for producing yogurt enriched with prebiotic and probiotic combinations alongside techniques such as microencapsulation, emulsification, and the incorporation of metal nanoparticles. Key factors such as viability, texture, and syneresis are examined to optimize yogurt-based nutraceuticals and functional medications.

Optimization of pH-responsive microgel for the co-delivery of Weizmannia coagulans and procyanidins to enhance survival rate and tolerance

The purpose of this study was to prepare a pH-responsive microgel for co-delivering Weizmannia coagulans 99 (BC99) and procyanidins (PCs) to enhance the survival rate and tolerance of probiotics in complex micro-environment. The effects of different concentrations of PCs on the properties of microgels were optimized, and found that the spherical microgels had higher encapsulation efficiency (90.27 ± 2.51%) and smaller size when the concentration of PCs was 20 μg/mL. The interaction among PCs, pectin and protein could effectively improve the survival rate of BC99 under different pH, bile salt, digestive enzyme and temperature conditions, maintain their stability in acidic gastric fluid, and realize the release of probiotics in neutral intestinal fluid. Moreover, the microgel was able to protect BC99 against H2O2 and antibiotics. This work provides a pH-responsive co-loaded microgels for BC99 and PCs, and has the potential in the loading and delivery of other probiotics and polyphenols.

Encapsulated fucoxanthin improves the functional properties and storage stability of Undaria Pinnatifida and apple freeze-dried snack food during accelerated storage

Carotenoids, recognized for their antioxidant and anti-aging properties, are commonly used in functional foods. To enhance the application of fucoxanthin (FX) in the food industry, this study employed the ion gel method for encapsulating FX and combined it with raw materials such as Undaria pinnatifida homogenate and apple pieces to create freeze-dried crunchy chunks. The study evaluated the effects of encapsulated-FX on the functional and structural characteristics of the Undaria pinnatifida and apple freeze-dried chunks over accelerated storage period under high temperature and humidity. Various analyses were conducted, including physicochemical properties, texture analysis, color evaluation, sensory assessment, and simulated digestion analysis. The results demonstrated that the FX-rich freeze-dried crunchy chunks exhibited favorable structural properties and appealing flavor. Notably, after the accelerated storage period, the encapsulated-FX maintained significant antioxidant activity, along with excellent thermal and light stability, indicating high storage stability. Additionally, the main ingredients, sodium alginate (SAA) and pectin (PE), significantly enhanced the stability of FX during in vitro digestion. This study provided a straightforward approach for producing freeze-dried snack foods rich in stabled-FX, contributing to the diversity of value-added algae products. Furthermore, it laid a theoretical foundation and reference for the future development of nutritional products.

Bioactive compound encapsulation: Characteristics, applications in food systems, and implications for human health

Nanotechnology plays a pivotal role in food science, particularly in the nanoencapsulation of bioactive compounds, to enhance their stability, bioavailability, and therapeutic potential. This review aims to provide a comprehensive analysis of the encapsulation of bioactive compounds, emphasizing the characteristics, food applications, and implications for human health. This work offers a detailed comparison of polymers such as sodium alginate, gum Arabic, chitosan, cellulose, pectin, shellac, and xanthan gum, while also examining both conventional and emerging encapsulation techniques, including freeze-drying, spray-drying, extrusion, coacervation, and supercritical anti-solvent drying. The contribution of this review lies in highlighting the role of encapsulation in improving system stability, controlling release rates, maintaining bioactivity under extreme conditions, and reducing lipid oxidation. Furthermore, it explores recent technological advances aimed at optimizing encapsulation processes for targeted therapies and functional foods. The findings underline the significant potential of encapsulation not only in food supplements and functional foods but also in supportive medical treatments, showcasing its relevance to improving human health in various contexts.

Investigation into pectin extraction and technological implementations in the food industry

Pectin, a complex polysaccharide found abundantly in the cell walls of fruits and vegetables, plays a pivotal role in various food applications owing to its unique gelling, thickening and stabilizing properties. As consumer preferences lean towards natural and sustainable ingredients, the demand for pectin as a food additive has surged. This burgeoning interest has prompted a comprehensive exploration into both the extraction methods of pectin from its natural sources and its diverse technological applications in the food industry. The extraction process involves breaking down the plant cell wall to release the pectin. Traditional methods such as hot acid extraction have been widely used, but advances in technology have spurred the development of novel techniques like enzyme-assisted extraction and microwave-assisted extraction. These methods aim not only to enhance the yield and purity of extracted pectin but also to minimize environmental impact and energy consumption. Pectin's versatility has positioned it as a valuable ingredient in the food industry. Its ability to form gels under specific conditions makes it a key component in the production of jams, jellies and fruit preserves. Additionally, pectin acts as a stabilizer in dairy products, prevents syneresis in baked goods and improves the texture of confectionery items. The application of pectin goes beyond its role as a gelling agent; it is also employed in the encapsulation of bioactive compounds, enhancing the functional properties of various food products. © 2024 Society of Chemical Industry.

Entrapment of multi-scale structure of alginate beads stabilized with cellulose nanofibrils for potential intestinal delivery of lactic acid bacteria

Soybean cellulose nanofibrils (SCNFs) were formed by autoclave-enzymatic hydrolysis combined with ball milling. SCNFs were blended with sodium alginate (SA) to encapsulate lactic acid bacteria (LAB) through inotropic gelation. The effect of SCNFs on the multiscale structure of SA beads, leading to changes in the survival and release of LAB during simulated digestion, was investigated. Microscopy and rheological testing indicated that SCNF10-30 was well-dispersed in the SA paste in the form of interlaced nanofibrils, and could reduce the deformation of the paste under stress by 47.31 %. Multiscale structural analysis indicated SCNF10-30 not only increased the immobilized water of SA beads by 15.59 % by coordinating calcium, but also regulated the in situ-assembly of SA beads, including an increase in the scale of dimers from 6.73 nm to 8.32 nm and improved arrangement, thus forming a dense gel network. LAB viability of SA-SCNF10-30 in simulated digestion was increased by 1.3 log CFU/g compared to SA beads. Cellulose nanofibrils improved gastrointestinal survival and controlled release of LAB better than fiber rods. This study provides a strategy to regulate the multiscale structure of SA beads through nanofibrils to enable stabilization and sustainable release of LAB in gastrointestinal fluids.

Valorization of the performance of novel and natural sodium alginate/pectin/Portulaca oleracea L. ternary composites in the adsorption of toxic methylene blue dye from the aquatic environment

This research introduces the development of a novel, sustainable, cost-effective, and eco-friendly sodium alginate (SA)-pectin (P) ternary composite, enhanced with Portulaca oleracea L. (PO) additive, which has been thoroughly investigated for its efficacy in removing hazardous methylene blue (MB) dye from wastewater. The selectivity studies using various cationic and anionic dyes were conducted. The composite microbeads that were generated underwent characterization using FTIR-ATR, SEM, XRD, zeta potential, and pHpzc analysis. Subsequently, the most favorable parameters for adsorption, including initial pH (2-12), contact time (0-180 min), adsorbent dosage (0.01-0.20 g), and temperature (298-318 K), were identified. The effect of monovalent and divalent salt concentrations on adsorption process was evaluated. The adsorption data were utilized in several isotherm (Langmuir, Freundlich, D-R, and Temkin) and kinetic (pseudo-first-order and pseudo-second-order) models. According to the Langmuir isotherm model was calculated the adsorption capacity at 298 K is 709.22 mg/g for SA/P/PO30 composite microbeads. The process of adsorption was seen to conform to a pseudo-second-order kinetic model. The results revealed that the process was both exothermic (∆Ho=-10.42kJ/mol) and spontaneous (∆Go=-26.04kJ/molat298K). Moreover, reusability analyses demonstrated that the composite microbeads that were created may be utilized several times, even after the 5th cycle. The results indicate that the developed composite microbeads have the potential to serve as an effective and inexpensive adsorbent for eliminating cationic contaminants from a wastewater.

Development of probiotic yogurt products incorporated with Lactobacillus kefiranofaciens OSU-BSGOA1 in mono- and coculture with Kluyveromyces marxianus

The bacterium Lactobacillus kefiranofaciens OSU-BDGOA1 and yeast Kluyveromyces marxianus bdgo-ym6 were previously isolated from kefir grains and have shown probiotic traits in mono- and coculture. This research evaluates the effect of introducing probiotic kefir microorganisms in monoculture and in coculture alongside yogurt starter cultures on the physicochemical and rheological properties, volatile flavor compounds, survival of the microorganisms during simulated digestion, and sensory attributes of the final fermented products. The incorporation of L. kefiranofaciens OSU-BDGOA1 in monoculture showed promising outcomes, resulting in a final product showing more solid-like characteristics and potentially improving the texture of the product. There was also a significant increase in the concentration of desirable volatile flavor compounds in the yogurt with the monoculture, particularly 2,3-butanedione, displaying a positive correlation with buttery flavor in the sensory analysis. The inclusion of L. kefiranofaciens in monoculture also promoted better sensory attributes and was significantly better than the yogurt with the coculture with the yeast, showing promising results for the incorporation of this probiotic bacterium into functional fermented dairy products.

Construction of a pectin/sodium alginate composite hydrogel delivery system for improving the bioaccessibility of phycocyanin

In this study, different concentrations of sodium alginate were compounded with pectin and phycocyanin to co-prepare composite hydrogel spheres (HP-PC-SA 0.2 %, 0.6 %, 1.0 %, 1.4 %) to evaluate the potential of the composite hydrogel spheres for the application as phycocyanin delivery carriers. The hydrogel spheres' physicochemical properties and bioaccessibility were assessed through scanning electron microscopy, textural analysis, drug-carrying properties evaluation, and in vitro and in vivo controlled release analysis in the gastrointestinal environment. Results indicated that higher sodium alginate concentrations led to smaller pore sizes and denser networks on the surface of hydrogel spheres. The textural properties of hydrogel spheres improved, and their water-holding capacity increased from 93.01 % to 97.97 %. The HP-PC-SA (1.0 %) formulation achieved the highest encapsulation rate and drug loading capacity, at 96.87 % and 6.22 %, respectively. Within the gastrointestinal tract, the composite hydrogel's structure significantly enhanced and protected the phycocyanin's digestibility, achieving a bioaccessibility of up to 88.03 %. In conclusion, our findings offer new insights into improving functionality and the effective use of phycocyanin via pectin-based hydrogel spheres.

Encapsulation of Probiotics within Double/Multiple Layer Beads/Carriers: A Concise Review

An increased demand for natural products nowadays most specifically probiotics (PROs) is evident since it comes in conjunction with beneficial health effects for consumers. In this regard, it is well known that encapsulation could positively affect the PROs' viability throughout food manufacturing and long-term storage. This paper aims to analyze and review various double/multilayer strategies for encapsulation of PROs. Double-layer encapsulation of PROs by electrohydrodynamic atomization or electrospraying technology has been reported along with layer-by-layer assembly and water-in-oil-in-water (W1/O/W2) double emulsions to produce multilayer PROs-loaded carriers. Finally, their applications in food products are presented. The resistance and viability of loaded PROs to mechanical damage, during gastrointestinal transit and shelf life of these trapping systems, are also described. The PROs encapsulation in double- and multiple-layer coatings combined with other technologies can be examined to increase the opportunities for new functional products with amended functionalities opening a novel horizon in food technology.

The application of encapsulation technology in the food Industry: Classifications, recent Advances, and perspectives

Encapsulation technology has been extensively used to enhance the stability, specificity, and bioavailability of essential food ingredients. Additionally, it plays a vital role in improving product quality and reducing production costs. This study presents a comprehensive classification of encapsulation techniques based on the state of different cores (solid, liquid, and gaseous) and offers a detailed description and analysis of these encapsulation methods. Specifically, it introduces the diverse applications of encapsulation technology in food, encompassing areas such as antioxidant, protein activity, physical stability, controlled release, delivery, antibacterial, and probiotics. The potential impact of encapsulation technology is expected to make encapsulation technology a major process and research hotspot in the food industry. Future research directions include applications of encapsulation for enzymes, microencapsulation of biosensors, and novel technologies such as self-assembly. This study provides a valuable theoretical reference for the in-depth research and wide application of encapsulation technology in the food industry.

Alginate-coated pomelo pith cellulose matrix for probiotic encapsulation and controlled release

A novel carrier comprised of ethanol- and alkali-modified cellulosic pomelo pith matrix coated with alginate was developed to improve viability while enabling gastrointestinal release of probiotics. Scanning electron microscopy imaging revealed the agricultural byproduct had a honeycomb-structured cellulose framework, enabling high loading capacity of the probiotic Lactobacillus plantarum up to 9 log CFU/g. Ethanol treatment opened up pores with an average diameter of 97 μm, while alkali treatment increased swelling and porosity, with an average pore size of 51 μm. The survival rate through the stomach was increased from 89.76 % to 91.08 % and 91.24 % after ethanol and alkali modification, respectively. The control group displayed minimal release in the first 4 h followed by a burst release. Both ethanol modification and alkali modification resulted in constant linear release over time. The release time was prolonged when decreasing the width of the pomelo peel rolls from 10 mm to 5 mm while keeping the volume of the peel constant. After 8 weeks of refrigerated storage, the cellulose-encapsulated probiotics retained viability above 7 log CFU/g. This study demonstrates the potential of the structurally intact, sustainably-sourced cellulosic pomelo pith for probiotic encapsulation and controlled delivery.

Enhance the resistance of probiotics by microencapsulation and biofilm construction based on rhamnogalacturonan I rich pectin

Microcapsules were always used as functional material carriers for targeted delivery and meanwhile offering protection. However, microcapsule wall materials with specific properties were required, which makes the choice of wall material a key factor. In our previous study, a highly branched rhamnogalacturonan I rich (RG-I-rich) pectin was extracted from citrus canning processing water, which showed good gelling properties and binding ability, indicating it could be a potential microcapsule wall material. In the present study, Lactiplantibacillus plantarum GDMCC 1.140 and Lactobacillus rhamnosus were encapsulated by RG-I-rich pectin with embedding efficiencies of about 65 %. The environmental tolerance effect was evaluated under four different environmental stresses. Positive protection results were obtained under all four conditions, especially under H2O2 stress, the survival rate of probiotics embedded in microcapsules was about double that of free probiotics. The storage test showed that the total plate count of L. rhamnosus encapsulated in RG-I-rich pectin microcapsules could still reach 6.38 Log (CFU/mL) at 25 °C for 45 days. Moreover, probiotics embedded in microcapsules with additional incubation to form a biofilm layer inside could further improve the probiotics' activities significantly in the above experiments. In conclusion, RG-I-rich pectin may be a good microcapsule wall material for probiotics protection.

Production of bioactive and functional frozen yogurt through easy-to-make microspheres incorporation

In the food industry, the microencapsulation process is important to control the release of active encapsulated ingredients, mask unwanted flavors, colors, and unpleasant smells, increase shelf life, and protect encapsulated components from light, moisture, and nutritional loss. In this process, microspheres are formed using cross-linked polymer, which can incorporate aqueous or oily ingredients, using simple physicochemical methods of phase separation by coacervation, without the need for organic solvents. In this context, this study aimed to develop bioactive, functional frozen yogurt through the incorporation of microspheres loaded with ascorbic acid or omega 3. The process used resulted in small microspheres (15-80 μm), imperceptible to the palate, and capable of swelling about 14 times, being suitable for incorporating omega 3, without altering the swelling, and extending the shelf life of the ascorbic acid for 6 weeks, even in an acid medium. Also, the matrix does not affect the properties of frozen yogurt and acts as a stabilizer, contributing to reduce the melting rate. The sensory analysis proved that encapsulation was promising to mask the taste and odor of omega 3 and to protect the ascorbic acid, without altering the properties and quality of the frozen product.

Microencapsulation of Bifidobacterium bifidum F-35 via modulation of emulsifying technique and its mechanical effects on the rheological stability of set-yogurt

Microencapsulation of B. bifidum F-35 was carried out through emulsification technique in order to increase the microbial load while maintaining the rheological functions of set-yogurt. To produce single-layer (SL) microcapsules of whey protein, the pH was adjusted to 6.4 within Transglutaminase-induced gelation. Sodium alginate was processed as the external layer using calcium-induced gelation (pH 5.5) to produce the double-layer (DL) microcapsule. Scanning electron microscopy revealed that SL and DL microcapsules had sizes of 10 and 280 μm, respectively. The highest microbial load was clearly visible in the DL sample. According to texture profile analysis, the DL sample had the highest levels of gumminess, chewiness, and adhesiveness. The free sample outperformed the encapsulated samples in terms of springiness and cohesiveness. Although the SL sample had the highest viscosity, it produced a deformed gel when firmness was measured. In terms of firmness, the DL sample performed quite well. The viability of encapsulated B. bifidum F-35 in DL was higher than SL microcapsules during storage. Microencapsulation of B. bifidum F-35 with whey protein and sodium alginate is a promising technique that could improve the rheological properties of set-yogurt as a popular vehicle for bioactive ingredients.

Graphical abstract

An optimized 3D-printed capsule scaffold utilizing artificial neural network for the targeted delivery of chlorogenic acid to the colon

Chlorogenic acid (CGA) is an important bioactive polyphenol with extensive biological properties. This study aimed to fabricate an optimized three-dimensional (3D)-printed capsule scaffold and CGA capsules for targeted delivery of hydrophobic CGA to the colon. The optimized printing parameters identified using the neural network model were a temperature of 170 °C, a printing speed of 20 mm/s, and a nozzle diameter of 0.3 mm. The capsules exhibited slow releasing properties of CGA, and the releasing rates of Eudragit®FS 30D-sealed capsules (due to more cracks and voids) were faster than those of Eudragit®S100-sealed capsules. The Ritger-peppas model was the best fitting model to describe the releasing process of CGA from 8 CGA capsules (R2 ≥ 0.98). All CGA capsules exhibited shear-thinning properties with stable sol-gel viscosity at low shear rates. FTIR spectra confirmed the formation of non-covalent bonds between CGA and the sol. Overall, the obtained 3D-printed capsules provided a promising carrier for the targeted delivery of CGA in the development of personalized dietary supplements.

An efficient method for improving the stability of Monascus pigments using ionic gelation

BACKGROUND

Monascus pigments (Mps) are easily impacted by heating, pH and light, resulting in degradation. In this study, Mps were encapsulated by the ionic gelation method with sodium alginate (SA) and sodium caseinate (SC), as well as CaCl2 as a crosslinker. The encapsulated Mps SA/SC in four proportions (SA/SC: 1/4, 2/3, 3/2, 4/1, w/w). Then, the encapsulation efficiency and particle size of the SA/SC-Mps system were evaluated to obtain the optimal embedding conditions. Finally, the effects of heating, pH, light and storage on the stability of non-capsulated Mps and encapsulated Mps were assessed.

RESULTS

SA/SC = 2/3 (AC2) had higher encapsulation efficiency (74.30%) of Mps and relatively small particle size (2.02 mm). The AC2 gel beads were chosen for further investigating the stability of encapsulated Mps to heating, pH, light and storage. Heat stability experiments showed that the degradation of Mps followed first-order kinetics, and the encapsulated Mps had lower degradation rates than non-capsulated Mps. Encapsulation could reduce the effect of pH on Mps. The effects of ultraviolet light on the stability of Mps were considered, and showed that the retention efficiency of encapsulated Mps was 22.01% higher than that of non-capsulated Mps on the seventh day. Finally, storage stability was also evaluated under dark refrigerated conditions for 30 days, and the results indicated that encapsulation could reduce the degradation of Mps.

CONCLUSION

This study has proved that AC2 gel beads can improve the stability of Mps. Thus, the ionic gelation method is a promising encapsulation method to improve the stability of Mps. © 2023 Society of Chemical Industry.

Screening of Lactiplantibacillus plantarum 67 with Strong Adhesion to Caco-2 Cells and the Effects of Protective Agents on Its Adhesion Ability during Vacuum Freeze Drying

Adhesion to the intestinal tract provides the foundation for Lactobacillus to exert its benefits. Vacuum freeze-drying (VFD) is currently one of the main processing methods for Lactobacillus products. Therefore, the effects of VFD on the adhesion and survival of Lactiplantibacillus plantarum 67 were investigated in this study. The results show that L. plantarum 67 exhibits remarkable tolerance following successive exposure to simulated saliva, gastric juice and intestinal juice, and also has a strong adhesion ability to Caco-2 cells. The adhesion and survival rates of L. plantarum 67 significantly decreased after VFD in phosphate-buffered saline (PBS), whereas they significantly increased in protective agents (PAs) (p < 0.05). Scanning electron microscope observations show that L. plantarum 67 aggregated more to Caco-2 cells in PAs than in PBS, and its shape and size were protected. Proteomics detection findings indicated that differentially expressed proteins (DEPs) related to adhesins and vitality and their pathways in L. plantarum 67 were significantly affected by VFD (p < 0.05). However, the expression of DEPs (such as cold shock protein, cell surface protein, adherence protein, chitin-binding domain and extracellular transglycosylase, membrane-bound protein) was improved by PAs. Compared with PBS, the PAs significantly adjusted the phosphotransferase system and amino sugar and nucleotide sugar metabolism pathways (p < 0.05). VFD decreased the adhesion and vitality of L. plantarum 67, while the PAs could exert protective effects by regulating proteins and pathways related to adhesion and vitality.

Modified Prebiotic-Based "Shield" Armed Probiotics with Enhanced Resistance of Gastrointestinal Stresses and Prolonged Intestinal Retention for Synergistic Alleviation of Colitis

Oral administration of probiotics is a promising method to alleviate inflammatory bowel diseases (IBDs). However, gastrointestinal environmental sensitivity and inferior intestinal colonization of probiotics hinder the alleviation effect. Here, we developed a simple yet effective modified prebiotic-based "shield" (Fe-TA@mGN) composed of an Fe3+-tannic acid cross-linking network and carboxymethylated β-glucan for arming Escherichia coli Nissle 1917 (EcN@Fe-TA@mGN). The Fe-TA@mGN "shield" not only acted as a dynamic barrier to enhance the gastrointestinal stress resistance ability of EcN but also aided the intestinal colonization of EcN as well as synergized with EcN for the alleviation of dextran sulfate sodium (DSS) induced colitis. More specifically, with the protection of the Fe-TA@mGN "shield", the survival rate of armed EcN could be up to ∼1720 times higher than that of bare EcN after exposure to simulated gastric fluid. Excitingly, the intestinal retention rate of EcN@Fe-TA@mGN was as high as 47.54 ± 6.06% at 16 h post-administration, while almost all bare EcNs were excreted out at 8 h post-administration. With all of the aforementioned attributes, EcN@Fe-TA@mGN efficiently alleviated colitis, verified by the repair of the intestinal barrier and the attenuation of inflammation. Moreover, for EcN@Fe-TA@mGN, mGN synergized with EcN to positively modulate gut microbiota and promote the production of short-chain fatty acids (SCFAs, especially for butyric acid, a primary source for maintaining intestinal health), both of which would further advance the alleviation of colitis. We envision that the strategy developed here will inspire the exploitation of various prebiotics to arm probiotics for the effective alleviation of IBD.

Probiotic Fermented Goat's and Sheep's Milk: Effect of Type and Dose of Collagen on Survival of Four Strains of Probiotic Bacteria during Simulated In Vitro Digestion Conditions

Microbial tolerance of digestive stresses depends not only on the bacterial strain but also on the structure and physicochemical properties of the supply chain and the foods that contain it. In the present study, we aimed to evaluate the effects of the type of milk (ovine, caprine) and the type and dose of collagen on the viability of four probiotic strains, Lacticaseibacillus paracasei L-26, Lacticaseibacillus casei 431, Lactobacillus acidophilus LA-5, and Lacticaseibacillus rhamnosus Lr-32, during in vitro gastrointestinal digestion. The highest survival rate under simulated in vitro digestion conditions compared to the number of cells before digestion was found in two strains, L. casei and L. paracasei, where survival rates were greater than 50% in each batch. The survival rate of the L. rhamnosus strain ranged from 41.05% to 64.23%. In caprine milk fermented by L. acidophilus, a higher survival rate was found in milk with 1.5% hydrolysate than the control, by about 6%. Survival of the L. rhamnosus strain was favorably affected by the 3% addition of bovine collagen in caprine milk, which increased survival by about 14% compared to the control sample. Adding 3% of hydrolysate to sheep's and goat's milk enhanced the survival of the L. rhamnosus strain by 3% and 19%, respectively. This study reports that fermented caprine and ovine milk may be suitable matrices for the probiotic supply of commercial dairy starter cultures and promote gut homeostasis.

Controlled release of Lactiplantibacillus plantarum by colon-targeted adhesive pectin microspheres: Effects of pectin methyl esterification degrees

The aim of this study is to report the preparation of pectin microspheres by varying degrees of methyl esterification (DM) cross-linked with divalent cationic calcium to encapsulate Lactiplantibacillus plantarum STB1 and L. plantarum LJ1, respectively. Scanning electron microscopy revealed the compact and smooth surface of pectin of DM 28 %, and the stochastic distribution of L. plantarum throughout the gel reticulation. And the pectin of DM 28 % considerably increased probiotics tolerance after continuous exposure to stimulated gastrointestinal tract conditions, with viable counts exceeding 10⁹ CFU/mL. This data indicated that low methoxy-esterification pectin was more efficient to improve the targeted delivery of probiotics in GIT. Additionally, the controlled release of microspheres was dependent on various pH levels. At pH 7.4, the release rates of L. plantarum STB1 and L. plantarum LJ1 reached up to 97.63 % and 95.33 %, respectively. Finally, the Caco-2 cell adhesion model was used to evaluate the cell adhesion rate after encapsulation, which exhibited better adhesion at DM of 60 %.

Multifunctional hydrogels based on chitosan, hyaluronic acid and other biological macromolecules for the treatment of inflammatory bowel disease: A review

Hydrogel is a three-dimensional network polymer material rich in water. It is widely used in the biomedical field because of its unique physical and chemical properties and good biocompatibility. In recent years, the incidence of inflammatory bowel disease (IBD) has gradually increased, and the disadvantages caused by traditional drug treatment of IBD have emerged. Therefore, there is an urgent need for new treatments to alleviate IBD. Hydrogel has become a potential therapeutic platform. However, there is a lack of comprehensive review of functional hydrogels for IBD treatment. This paper first summarizes the pathological changes in IBD sites. Then, the action mechanisms of hydrogels prepared from chitosan, sodium alginate, hyaluronic acid, functionalized polyethylene glycol, cellulose, pectin, and γ-polyglutamic acid on IBD were described from aspects of drug delivery, peptide and protein delivery, biologic therapies, loading probiotics, etc. In addition, the advanced functions of IBD treatment hydrogels were summarized, with emphasis on adhesion, synergistic therapy, pH sensitivity, particle size, and temperature sensitivity. Finally, the future development direction of IBD treatment hydrogels has been prospected.

Whey protein hydrolysates as prebiotic and protective agent regulate growth and survival of Lactobacillus rhamnosus CICC22152 during spray/freeze-drying, storage and gastrointestinal digestion

BACKGROUND

Probiotic products are receiving increasing attention because of their tremendous beneficial health effects. However, it is still a great challenge to preserve probiotic viability during processing, storage and gastrointestinal digestion. Encapsulation is a widely known technology for enhancing bacterial viability and product stability. Hence highly hydrolyzed whey protein hydrolysate (HWPH) and moderately hydrolyzed whey protein hydrolysate (MWPH) used as a one-step culture medium and wall material for Lactobacillus rhamnosus were investigated.

RESULTS

H/MWPH-substitutive medium for the growth of Lactobacillus rhamnosus presented double the biomass production compared to other media. The H/MWPH-substitutive medium in combination with freeze drying also led to the highest survival ratio (97.13 ± 9.16%) and cell viability (10.62 log CFU g^-1 ). The highest survival rate of spray-dried cells was 85.56 ± 7.4%. In addition, the cell viability of spray-dried Lactobacillus rhamnosus with MWPH as culture and dry medium was 0.79 log CFU g^-1 higher than that of HWPH. Images confirmed that spray-dried Lactobacillus rhamnosus in MWPH provided better protection and it showed greater sustained viability after gastrointestinal digestion.

CONCLUSION

Overall, WPH just as carrier provides better thermal protection and MWPH is a preferable two-in-one medium for probiotics. © 2022 Society of Chemical Industry.

Enhanced quorum sensing capacity via regulating microenvironment to facilitate stress resistance of probiotic in alginate-based microcapsules

Alginate-based microcapsule has becoming a promising carrier for probiotic encapsulation due to the improved stress resistant ability. Besides the physical protection of microcapsules, bacterial quorum sensing (QS) is another prominent factor affecting microbial stress resistance in microcapsules. In the present study, Vibrio harveyi cells were entrapped and proliferated into cell aggregates in alginate-based microcapsules. The microenvironment composed of cells and biomacromolecules was regulated by the diameter, alginate concentration and core state of microcapsule. Then the effect of microenvironment on bacterial QS capacity was investigated, including bioluminescence, autoinducers (AIs) production and QS related genes expression. The highest diameter of 1200 μm and highest alginate concentration of 2.0 % w/v under the investigation range presented strongest QS capacity, and the maintenance of hydrogel core could enhance bacterial QS. Moreover, the mechanism analysis revealed that the formed biofilm on the surface of cell aggregates hampered the outward transfer of AIs, and the local AIs inside the cell aggregates induced stronger bacteria QS by close-range interaction. As a whole, these findings are helpful to guide the technological development and optimization of microencapsulated probiotics with stronger stress resistance, and the potential application in food, dairy, wastewater treatment and biosensor.

Hydrogels as promising platforms for engineered living bacteria-mediated therapeutic systems

The idea of using engineered bacteria as prospective living therapeutic agents for the treatment of different diseases has been raised. Nevertheless, the development of safe and effective treatment strategies remains essential to the success of living bacteria-mediated therapy. Hydrogels have presented great promise for the delivery of living bacterial therapeutics due to their tunable physicochemical properties, good bioactivities, and excellent protection of labile payloads. In this review, we summarize the hydrogel design strategies for living bacteria-mediated therapy and review the recent advances in hydrogel-based living bacterial agent delivery for the treatment of typical diseases, including those for digestive health, skin fungal infections, wound healing, vaccines, and cancer, and discuss the current challenges and future perspectives of these strategies in the field. It is believed that the importance of hydrogel-based living bacteria-mediated therapy is expected to further increase with the development of both synthetic biology and biomaterials science in the future.

Sheep Milk Symbiotic Ice Cream: Effect of Inulin and Apple Fiber on the Survival of Five Probiotic Bacterial Strains during Simulated In Vitro Digestion Conditions

We conducted a study to determine the survival of bacterial cells under in vitro digestion. For this purpose, ice cream mixes were prepared: control, with 4% inulin, 2.5% inulin and 1.5% apple fiber and 4% apple fiber. Each inoculum (pH = 4.60 ± 0.05), containing 9 log cfu g^-1 bacteria, at 5% (w/w) was added to the ice cream mixes (Lacticaseibacilluscasei 431, Lactobacillus acidophilus LA-5, Lacticaseibacillus paracasei L-26, Lacticaseibacillusrhamnosus, Bifidobacterium animalis ssp. lactis BB-12) and fermentation was carried out to pH 4.60 ± 0.05. The in vitro digestion method simulated the stages of digestion that occur in the mouth, stomach and small intestine under optimal controlled conditions (pH value, time and temperature). At each stage of digestion, the survival rate of probiotic bacteria was determined using the plate-deep method. As expected, in the oral stage, there was no significant reduction in the viability of the probiotic bacteria in any ice cream group compared to their content before digestion. In the stomach stage, Bifidobacterium animalis ssp. lactis BB-12 strain had the highest viable counts (8.48 log cfu g^-1) among the control samples. Furthermore, a 4% addition of inulin to ice cream with Bifidobacterium BB-12 increased gastric juice tolerance and limited strain reduction by only 16.7% compared to the number of bacterial cells before digestion. Regarding ice cream samples with Bifidobacterium BB-12, replacing part of the inulin with apple fiber resulted in increased survival at the stomach stage and a low reduction in the bacterial population of only 15.6% compared to samples before digestion. At the stomach stage, the positive effect of the addition of inulin and apple fiber was also demonstrated for ice cream samples with Lacticaseibacilluscasei 431 (9.47 log cfu g^-1), Lactobacillus acidophilus LA-5 (8.06 log cfu g^-1) and Lacticaseibacillus paracasei L-26 (5.79 log cfu g^-1). This study showed the highest sensitivity to simulated gastric stress for ice cream samples with Lacticaseibacillusrhamnosus (4.54 log cfu g^-1). Our study confirmed that the 4% addition of inulin to ice cream increases the survival rate of L. casei and Bifidobacterium BB-12 in simulated intestinal juice with bile by 0.87 and 2.26 log cfu g^-1, respectively. The highest viable count in the small intestine stage was observed in ice cream with L. acidophilus. The addition of inulin increased the survival of L. rhamnosus by 10.8% and Bifidobacterium BB-12 by about 22% under conditions of simulated in vitro digestion compared to their control samples. The survival rates of L. casei and L. paracasei were also highly affected by the 4% addition of apple fiber, where the increase under gastrointestinal passage conditions was determined to range from 7.86-11.26% compared to their control counterparts. In comparison, the lowest survival rate was found in the control ice cream with L. rhamnosus (47.40%). In our study at the intestinal stage, only five ice cream groups: a sample with 4% inulin and L. acidophilus, a control sample with Bifidobacterium BB12, a sample with 2.5% inulin and 1.5% apple fiber with Bifidobacterium BB12, a control sample with L. rhamnosus, a sample with 4% fiber and L. rhamnosus reported bacterial cell counts below 6 log cfu g^-1 but higher than 5 log cfu g^-1. However, in the remaining ice cream groups, viable counts of bacterial cells ranged from 6.11 to 8.88 log cfu g^-1, ensuring a therapeutic effect. Studies have clearly indicated that sheep milk ice cream could provide a suitable matrix for the delivery of probiotics and prebiotics and contribute to intestinal homeostasis. The obtained results have an applicative character and may play an essential role in developing new functional sheep milk ice cream.

Novel nano-encapsulated probiotic agents: Encapsulate materials, delivery, and encapsulation systems

Gut microbes are closely associated with most human health. When ingested orally, probiotics can effectively regulate the composition and quantity of human intestinal microorganisms, which is beneficial to human health. However, probiotics will be affected by the harsh environment of the digestive tract during the in vivo transportation process, and ensuring the viability of probiotics is a great challenge. Probiotic encapsulating technology provides an effective solution to this problem. The introduction of extreme temperatures, large probiotic microcapsule sizes and the difficulty in controlling probiotic microcapsule particle sizes mean that traditional microcapsule encapsulation methods have some limitations. From traditional microcapsule technology to the bulk encapsulation of probiotics with nanofibers and nanoparticles to the recent ability to wear nano "armor" for a single probiotic through biofilm, biological membrane and nanocoating. Emerging probiotic nanoagents provides a new conceptual and development direction for the field of probiotic encapsulation. In this review, we presented the characteristics of encapsulated probiotic carrier materials and digestive tract transport systems, we focused on the encapsulation systems of probiotic nanoagents, we analyzed the shortcomings and advantages of the current agent encapsulation systems, and we stated the developmental direction and challenges for these agents for the future.

Effects of Commercial Polysaccharides Stabilizers with Different Charges on Textural, Rheological, and Microstructural Characteristics of Set Yoghurts

The study investigated the preparation of set yoghurts by adding three common commercial polysaccharide stabilizers, namely sodium alginate (SA), gellan gum (GG), and konjac gum (KGM), in milk fermentation to evaluate their effects on the texture, rheology, and microstructure of set yoghurts. The physicochemical properties, water-holding capacity (WHC), texture, low-field nuclear magnetic resonance (LF-NMR), rheology, and microstructure of set yoghurts added with different kinds and quantities of polysaccharides were compared and analyzed. The results showed that the set yoghurts added with anionic polysaccharide GG had more obvious effects on improving WHC, firmness, and rheological properties compared with the set yoghurt added with KGM and SA. The firmness of set yoghurts with 0.02% (w/v) GG increased from 1.17 N to 1.32 N, which significantly improved the gel structure. The transverse relaxation time (T2) of set yoghurts added with GG was the closest to that of the control. Compared with the set yoghurts added with 0.02% SA and KGM, the free water area (A23) of the one added with 0.02% GG decreased most significantly. Moreover, all samples showed shear-thinning behavior, and the apparent elastic and viscous modulus (G', G″) increased with the increase of GG concentration. The G' and G″ of set yoghurts with 0.005% SA and KGM were higher than those in the control, decreased when adding 0.010%, and then increased with the increase of SA and KGM. Additionally, the microscopic observation demonstrated that the addition of GG in set yoghurts significantly promoted the formation of larger protein clusters and showed a tighter and more uniform protein network comparing with the other two polysaccharides (SA, KGM).

Novel Developments on Stimuli-Responsive Probiotic Encapsulates: From Smart Hydrogels to Nanostructured Platforms

Biomaterials engineering and biotechnology have advanced significantly towards probiotic encapsulation with encouraging results in assuring sufficient bioactivity. However, some major challenges remain to be addressed, and these include maintaining stability in different compartments of the gastrointestinal tract (GIT), favoring adhesion only at the site of action, and increasing residence times. An alternative to addressing such challenges is to manufacture encapsulates with stimuli-responsive polymers, such that controlled release is achievable by incorporating moieties that respond to chemical and physical stimuli present along the GIT. This review highlights, therefore, such emerging delivery matrices going from a comprehensive description of addressable stimuli in each GIT compartment to novel synthesis and functionalization techniques to currently employed materials used for probiotic’s encapsulation and achieving multi-modal delivery and multi-stimuli responses. Next, we explored the routes for encapsulates design to enhance their performance in terms of degradation kinetics, adsorption, and mucus and gut microbiome interactions. Finally, we present the clinical perspectives of implementing novel probiotics and the challenges to assure scalability and cost-effectiveness, prerequisites for an eventual niche market penetration.