OPTICORE™, an innovative and accurate colonic targeting technology

Unraveling the role of pectin biodegradability and blend composition on the permeability of ethylcellulose-based blend films designed for colon targeting

Polysaccharides have often been used as the biodegradable compound in coated colon specific drug delivery systems. The selection of a specific polysaccharide is critical, as they are degraded by gut bacteria, leading to the site specific release of drugs in the colon. However, it is still not completely understood how bacterial enzymes act on the polysaccharides when they are incorporated in a coating that is primarlily made up of a hydrophobic polymer. Here, we explored to what extent pectinase degrades pectin in isolated pectin-ethylcellulose blend films by studying the film permeability. Comparison of the permeability coefficient of caffeine and the amount of pectin leakage from the blend film in the presence and absence of pectinase revealed that pectinase can still degrade the pectin in the film, on the condition that the polysaccharide is not completely encapsulated by ethylcellulose. This is different from the degradation of inulin by inulinase in the blend film of inulin in Eudragit RS as shown in our previous study (Ouyang et al., 2023). Pectin can provide a transmembrane channel for drugs due to its dissolution in water and degradation by pectinase. Pectins from apples and citrus with similar esterification degrees applied in this work had basically the same effect on film permeability and can serve as interchangeable materials for colon targeting coatings. Compatibility studies revealed a phase-separated structure of pectin-ethylcellulose films. As the proportion of pectin in the film increased, the blend film changed from a discontinuous structure to a bicontinuous structure, and the film permeability increased. Combined with the film structural characterization, the results show that the proportion of the blended components and the degradation of pectin in the film by pectinase are the determining factors affecting the permeability and microstructure of pectin-ethylcellulose blend films.

Chemometric and computational modeling of polysaccharide coated drugs for colonic drug delivery

A methodology based on Principal Component Analysis (PCA) and machine learning (ML) regression was developed in this study for predicting 5-aminosalicylic acid drug release from polysaccharide-coated formulation. The Raman method was used for collection of spectral data which were then used as inputs to the ML models for estimation of drug release. For ML modeling, we examined the predictive accuracy of three machine learning models-Elastic Net (EN), Group Ridge Regression (GRR), and Multilayer Perceptron (MLP)-for forecasting the release behavior of samples. The dataset, consisting of 155 data points with over 1500 spectral features, underwent preprocessing involving normalization, Principal Component Analysis (PCA) for dimensionality reduction, and outlier detection using Cook's Distance. Model hyperparameters were tuned using the Slime Mould Algorithm (SMA), and each model's performance was evaluated through k-fold cross-validation (k = 3). Assessment metrics, such as the coefficient of determination (R²), root mean square error (RMSE), and mean absolute error (MAE), emphasize the MLP model's exceptional performance. On the test set, MLP achieved an R² of 0.9989, notably higher than EN's R² of 0.9760 and GRR's R² of 0.7137. Additionally, MLP exhibited remarkably low test RMSE and MAE values at 0.0084 and 0.0067, respectively, in comparison to EN's RMSE of 0.0342 and MAE of 0.0267, as well as GRR's RMSE of 0.0907 and MAE of 0.0744. Parity plots and learning curves further validate MLP's predictive reliability, demonstrating close alignment between actual and predicted values and efficient learning with minimal overfitting. Consequently, the MLP model emerges as the most effective approach for this predictive task, offering a robust tool for accurately modeling complex spectral data. These findings underscore the robustness of the MLP model, providing a reliable and efficient approach for predicting drug release in polysaccharide-coated formulations, with implications for advancing colonic drug delivery systems.

Exploring starch-based excipients in pharmaceutical formulations: Versatile applications and future perspectives

Starch, a naturally abundant and biocompatible polysaccharide, serves as a key excipient in pharmaceutical formulations, enhancing drug stability, efficacy, and manufacturability. This review explores the properties, modifications, and diverse applications of starch-based excipients. Native starches from corn, potato, rice, and wheat are commonly used as disintegrants, binders, and fillers. Physical (e.g., pre-gelatinization), chemical (e.g., cross-linking, acetylation), and enzymatic modifications improve their functionality, such as enhanced stability and colon-specific drug delivery. Starch excels as a binder, improving tablet cohesion and strength, and as a disintegrant, promoting rapid drug release. It also supports controlled and sustained-release systems and advanced drug delivery methods, like nanoparticles and microparticles. Compared to other natural and synthetic excipients, starch offers advantages in biodegradability, non-toxicity, and cost-effectiveness, despite challenges like stability and batch variability. Innovations such as starch nanocrystals show promise in boosting drug solubility and bioavailability. Looking ahead, starch-based excipients hold potential for sustainable pharmaceutical development, personalized medicine, and 3D printing.

Advances in colon-targeted drug technologies

PURPOSE OF REVIEW

Herein, we present an overview of innovative oral technologies utilized in colonic drug delivery systems that have made significant translational and clinical advancements to treat inflammatory bowel disease (IBD) in recent years.

RECENT FINDINGS

The colon is home to distinct physiological conditions, such as pH and microbiota, that have been exploited in the development of colonic drug delivery systems for the treatment of local and systemic diseases. However, given the intra and interindividual variability in the gastrointestinal tract of both healthy and diseased states, various systems have shown inconsistencies in targeted drug release to the colon. Recent breakthroughs have led to systems that incorporate multiple independent trigger mechanisms, ensuring drug release even if one mechanism fails due to physiological variability. Such advanced platforms have bolstered the development of oral biologics delivery, an especially promising direction given the lack of commercially available oral antibody medications for IBD. These concepts can be further enhanced by employing 3D printing which enables the personalisation of medicines.

SUMMARY

Leveraging these novel technologies can accurately deliver therapeutics to the colon, allowing for treatments beyond gastrointestinal tract diseases. To realize the full potential of colonic drug delivery, it is paramount that research focuses on the clinical translatability and scalability of novel concepts.

Colon-Targeted Poly(ADP-ribose) Polymerase Inhibitors Synergize Therapeutic Effects of Mesalazine Against Rat Colitis Induced by 2,4-Dinitrobenzenesulfonic Acid

Background/Objectives: In addition to oncological applications, poly(ADP-ribose) polymerase (PARP) inhibitors have potential as anti-inflammatory agents. Colon-targeted delivery of PARP inhibitors has been evaluated as a pharmaceutical strategy to enhance their safety and therapeutic efficacy against gut inflammation. Methods: Colon-targeted PARP inhibitors 5-aminoisoquinoline (5-AIQ) and 3-aminobenzamide (3-AB) were designed and synthesized by azo coupling with salicylic acid (SA), yielding 5-AIQ azo-linked with SA (AQSA) and 3-AB azo-linked with SA (ABSA). Additional conjugation of AQSA with acidic amino acids yielded glutamic acid-conjugated AQSA (AQSA-Glu) and aspartic acid-conjugated AQSA, which further increased the hydrophilicity of AQSA. Results: The distribution coefficients of PARP inhibitors were lowered by chemical modifications, which correlated well with drug permeability via the Caco-2 cell monolayer. All derivatives were effectively converted to their corresponding PARP inhibitors in the cecal contents. Compared with observations in the oral administration of PARP inhibitors, AQSA-Glu and ABSA resulted in the accumulation of much greater amounts of each PARP inhibitor in the cecum. ABSA accumulated mesalazine (5-ASA) in the cecum to a similar extent as sulfasalazine (SSZ), a colon-targeted 5-ASA prodrug. In the DNBS-induced rat colitis model, AQSA-Glu enhanced the anticolitic potency of 5-AIQ. Furthermore, ABSA was more effective against rat colitis than SSZ or AQSA-Glu, and the anticolitic effects of AQSA-Glu were augmented by combined treatment with a colon-targeted 5-ASA prodrug. In addition, the colon-targeted delivery of PARP inhibitors substantially reduced their systemic absorption. Conclusions: Colon-targeted PARP inhibitors may improve the therapeutic and toxicological properties of inhibitors and synergize the anticolitic effects of 5-ASA.

Development of intestinal colonic drug delivery systems for diverticular disease: A QbD approach

This study aimed to advance the development of intestinal colon-coated sustained-release matrix tablets of metronidazole for diverticulitis treatment, employing the Quality by Design (QbD) methodology. Comprehensive Risk analysis and Risk evaluation were conducted to assess the potential risks associated with Critical Material Attributes (CMA) and Critical Process Parameters (CPP). Ishikawa diagram, color-coded risk classification and the Risk Priority Number (RPN) were used as tools for risk evaluation. A Design of Experiments (DoE) was executed using a fractional factorial design, incorporating five key factors derived from the Risk analysis and Risk evaluation. Two levels and a central point were established for each factor, resulting in 28 batches of coated tablets. The manufacturing process involved direct compression, followed by a coating process using pH-dependent or time-dependent polymers. Characterization and dissolution studies were conducted on all batches, and the obtained results underwent analysis of variance (ANOVA). The findings demonstrated the robustness and reproducibility of both the direct compression and coating processes. Statistical analysis identified HPMC/chitosan ratio, blending time, coating polymer, and coating weight gain as factors significantly impacting drug release. A Design Space was established to delineate the interplay of these factors, offering insights into various combinations influencing drug release behavior. Thus, the design space for 10 % weight gain formulations includes a range of HPMC/CH ratios between 2.7-3 and mixing times between 10 and 12 min; for 20 % weight gain formulations it includes a range of HPMC/CH ratios up to 2 and mixing times between 10 and 16 min. Multiple Linear Regression between technological and biopharmaceutical variables were optimized facilitating scale-up operations. Batches with a 10 % weight increase and varied HPMC viscosity grades and coating polymers achieve ∼50 % drug release at 24 h; however, batches with a 20 % weight increase along, with either high proportions of HPMC and short blending times or low proportions of HPMC and longer blending times, achieve slow release of metronidazole. This study contributes to optimizing metronidazole colonic delivery systems, enhancing their potential efficacy in diverticulitis treatment.

Characterising and preventing the gut microbiota's inactivation of trifluridine, a colorectal cancer drug

The gut microbiome can metabolise hundreds of drugs, potentially affecting their bioavailability and pharmacological effect. As most gut bacteria reside in the colon, drugs that reach the colon in significant proportions may be most impacted by microbiome metabolism. In this study the anti-colorectal cancer drug trifluridine was used as a model drug for characterising metabolism by the colonic microbiota, identifying correlations between bacterial species and individuals' rates of microbiome drug inactivation, and developing strategies to prevent drug inactivation following targeted colonic delivery. High performance liquid chromatography and ultra-high performance liquid chromatography coupled with high resolution tandem mass spectrometry demonstrated trifluridine's variable and multi-route metabolism by the faecal microbiota sourced from six healthy humans. Here, four drug metabolites were linked to the microbiome for the first time. Metagenomic sequencing of the human microbiota samples revealed their composition, which facilitated prediction of individual donors' microbial trifluridine inactivation. Notably, the abundance of Clostridium perfringens strongly correlated with the extent of trifluridine inactivation by microbiota samples after 2 hours (R2 = 0.8966). Finally, several strategies were trialled for the prevention of microbial trifluridine metabolism. It was shown that uridine, a safe and well-tolerated molecule, significantly reduced the microbiota's metabolism of trifluridine by acting as a competitive enzyme inhibitor. Further, uridine was found to provide prebiotic effects. The findings in this study greatly expand knowledge on trifluridine's interactions with the gut microbiome and provide valuable insights for investigating the microbiome metabolism of other drugs. The results demonstrate how protection strategies could enhance the colonic stability of microbiome-sensitive drugs.

State-of-the-art and future perspectives in ingestible remotely controlled smart capsules for drug delivery: A GENEGUT review

An emerging concern globally, particularly in developed countries, is the rising prevalence of Inflammatory Bowel Disease (IBD), such as Crohn's disease. Oral delivery technologies that can release the active therapeutic cargo specifically at selected sites of inflammation offer great promise to maximise treatment outcomes and minimise off-target effects. Therapeutic strategies for IBD have expanded in recent years, with an increasing focus on biologic and nucleic acid-based therapies. Reliable site-specific delivery in the gastrointestinal (GI) tract is particularly crucial for these therapeutics to ensure sufficient concentrations in the targeted cells. Ingestible smart capsules hold great potential for precise drug delivery. Despite previous unsuccessful endeavours to commercialise drug delivery smart capsules, the current rise in demand and recent advancements in component development, manufacturing, and miniaturisation have reignited interest in ingestible devices. Consequently, this review analyses the advancements in various mechanical and electrical components associated with ingestible smart drug delivery capsules. These components include modules for device localisation, actuation and retention within the GI tract, signal transmission, drug release, power supply, and payload storage. Challenges and constraints associated with previous capsule design functionality are presented, followed by a critical outlook on future design considerations to ensure efficient and reliable site-specific delivery for the local treatment of GI disorders.

Microcapsules based on biological macromolecules for intestinal health: A review

Intestinal dysfunction is becoming increasingly associated with neurological and endocrine issues, raising concerns about its impact on world health. With the introduction of several breakthrough technologies for detecting and treating intestinal illnesses, significant progress has been made in the previous few years. On the other hand, traditional intrusive diagnostic techniques are expensive and time-consuming. Furthermore, the efficacy of conventional drugs (not capsules) is reduced since they are more likely to degrade before reaching their target. In this context, microcapsules based on different types of biological macromolecules have been used to encapsulate active drugs and sensors to track intestinal ailments and address these issues. Several biomacromolecules/biomaterials (natural protein, alginate, chitosan, cellulose and RNA etc.) are widely used for make microcapsules for intestinal diseases, and can significantly improve the therapeutic effect and reduce adverse reactions. This article systematically summarizes microencapsulated based on biomacromolecules material for intestinal health control and efficacy enhancement. It also discusses the application and mechanism research of microencapsulated biomacromolecules drugs in reducing intestinal inflammation, in addition to covering the preparation techniques of microencapsulated drug delivery systems used for intestinal health. Microcapsule delivery systems' limits and potential applications for intestinal disease diagnosis, treatment, and surveillance were highlighted.

Machine learning of Raman spectra predicts drug release from polysaccharide coatings for targeted colonic delivery

Colonic drug delivery offers numerous pharmaceutical opportunities, including direct access to local therapeutic targets and drug bioavailability benefits arising from the colonic epithelium's reduced abundance of cytochrome P450 enzymes and particular efflux transporters. Current workflows for developing colonic drug delivery systems involve time-consuming, low throughput in vitro and in vivo screening methods, which hinder the identification of suitable enabling materials. Polysaccharides are useful materials for colonic targeting, as they can be utilised as dosage form coatings that are selectively digested by the colonic microbiota. However, polysaccharides are a heterogeneous family of molecules with varying suitability for this purpose. To address the need for high-throughput material selection tools for colonic drug delivery, we leveraged machine learning (ML) and publicly accessible experimental data to predict the release of the drug 5-aminosalicylic acid from polysaccharide-based coatings in simulated human, rat, and dog colonic environments. For the first time, Raman spectra alone were used to characterise polysaccharides for input as ML features. Models were validated on 8 unseen drug release profiles from new polysaccharide coatings, demonstrating the generalisability and reliability of the method. Further, model analysis facilitated an understanding of the chemical features that influence a polysaccharide's suitability for colonic drug delivery. This work represents a major step in employing spectral data for forecasting drug release from pharmaceutical formulations and marks a significant advancement in the field of colonic drug delivery. It offers a powerful tool for the efficient, sustainable, and successful development and pre-ranking of colon-targeted formulation coatings, paving the way for future more effective and targeted drug delivery strategies.

Design strategies, advances and future perspectives of colon-targeted delivery systems for the treatment of inflammatory bowel disease

Inflammatory bowel diseases (IBD) significantly contribute to high mortality globally and negatively affect patients' qualifications of life. The gastrointestinal tract has unique anatomical characteristics and physiological environment limitations. Moreover, certain natural or synthetic anti-inflammatory drugs are associated with poor targeting, low drug accumulation at the lesion site, and other side effects, hindering them from exerting their therapeutic effects. Colon-targeted drug delivery systems represent attractive alternatives as novel carriers for IBD treatment. This review mainly discusses the treatment status of IBD, obstacles to drug delivery, design strategies of colon-targeted delivery systems, and perspectives on the existing complementary therapies. Moreover, based on recent reports, we summarized the therapeutic mechanism of colon-targeted drug delivery. Finally, we addressed the challenges and future directions to facilitate the exploitation of advanced nanomedicine for IBD therapy.

Biopolymer-Based Nanomedicine for Cancer Therapy: Opportunities and Challenges

Cancer, as the foremost challenge among human diseases, has plagued medical professionals for many years. While there have been numerous treatment approaches in clinical practice, they often cause additional harm to patients. The emergence of nanotechnology has brought new directions for cancer treatment, which can deliver anticancer drugs specifically to tumor areas. This article first introduces the application scenarios of nanotherapies and treatment strategies of nanomedicine. Then, the noteworthy characteristics exhibited by biopolymer materials were described, which make biopolymers stand out in polymeric nanomedicine delivery. Next, we focus on summarizing the state-of-art studies of five categories of proteins (Albumin, Gelatin, Silk fibroin, Zein, Ferritin), nine varieties of polysaccharides (Chitosan, Starch, Hyaluronic acid, Dextran, cellulose, Fucoidan, Carrageenan, Lignin, Pectin) and liposomes in the field of anticancer drug delivery. Finally, we also provide a summary of the advantages and limitations of these biopolymers, discuss the prevailing impediments to their application, and discuss in detail the prospective research directions. This review not only helps readers understand the current development status of nano anticancer drug delivery systems based on biopolymers, but also is helpful for readers to understand the properties of various biopolymers and find suitable solutions in this field through comparative reading.

An overview on recent approaches for colonic drug delivery systems

Colon-targeted drug delivery systems have garnered significant interest as potential solutions for delivering various medications susceptible to acidic and catalytic degradation in the gastrointestinal (GI) tract or as a means of treating colonic diseases naturally with fewer overall side effects. The increasing demand for patient-friendly drug administration underscores the importance of colonic drug delivery, particularly through noninvasive methods like nanoparticulate drug delivery technologies. Such systems offer improved patient compliance, cost reduction, and therapeutic advantages. This study places particular emphasis on formulations and discusses recent advancements in various methods for designing colon-targeted drug delivery systems and their medicinal applications.

Nanomedicine for colon-targeted drug delivery: strategies focusing on inflammatory bowel disease and colon cancer

The nanostructured drug-delivery systems for colon-targeted drug delivery are a promising field of research for localized diseases particularly influencing the colonic region, in other words, ulcerative colitis, Crohn's disease, and colorectal cancer. There are various drug-delivery approaches designed for effective colonic disease treatment, including stimulus-based formulations (enzyme-triggered systems, pH-sensitive systems) and magnetically driven drug-delivery systems. In addition, targeted drug delivery by means of overexpressed receptors also offers site specificity and reduces drug resistance. It also covers GI tract-triggered emulsifying systems, nontoxic plant-derived nanoformulations as advanced drug-delivery techniques as well as nanotechnology-based clinical trials toward colonic diseases. This review gives insight into advancements in colon-targeted drug delivery to meet site specificity or targeted drug-delivery requirements.

The colon targeting efficacies of mesalazine medications and their impacts on the gut microbiome

Successful treatment of ulcerative colitis (UC) is highly dependent on several parameters, including dosing regimen and the ability to deliver drugs to the disease site. In this study two strategies for delivering mesalazine (5-aminosalicylic acid, 5-ASA) to the colon were compared in an advanced in vitro model of the human gastrointestinal (GI) tract, the SHIME® system. Herein, a prodrug strategy employing bacteria-mediated drug release (sulfasalazine, Azulfidine®) was evaluated alongside a formulation strategy that utilised pH and bacteria-mediated release (5-ASA, Octasa® 1600 mg). SHIME® experiments were performed simulating both the GI physiology and colonic microbiota under healthy and inflammatory bowel disease (IBD) conditions, to study the impact of the disease state and ileal pH variability on colonic 5-ASA delivery. In addition, the effects of the products on the colonic microbiome were investigated by monitoring bacterial growth and metabolites. Results demonstrated that both the prodrug and formulation approaches resulted in a similar percentage of 5-ASA recovery under healthy conditions. On the contrary, during experiments simulating the GI physiology and microbiome of IBD patients (the target population) the formulation strategy resulted in a higher proportion of 5-ASA delivery to the colonic region as compared to the prodrug approach (P < 0.0001). Interestingly, the two products had distinct effects on the synthesis of key bacterial metabolites, such as lactate and short chain fatty acids, which varied according to disease state and ileal pH variability. Further, both 5-ASA and sulfasalazine significantly reduced the growth of the faecal microbiota sourced from six healthy humans. The findings support that the approach selected for colonic drug delivery could significantly influence the effectiveness of UC treatment, and highlight that drugs licensed for UC may differentially impact the growth and functioning of the colonic microbiota.

Colon Drug Delivery Systems Based on Swellable and Microbially Degradable High-Methoxyl Pectin: Coating Process and In Vitro Performance

Oral colon delivery systems based on a dual targeting strategy, harnessing time- and microbiota-dependent release mechanisms, were designed in the form of a drug-containing core, a swellable/biodegradable polysaccharide inner layer and a gastroresistant outer film. High-methoxyl pectin was employed as the functional coating polymer and was applied by spray-coating or powder-layering. Stratification of pectin powder required the use of low-viscosity hydroxypropyl methylcellulose in water solution as the binder. These coatings exhibited rough surfaces and higher thicknesses than the spray-coated ones. Using a finer powder fraction improved the process outcome, coating quality and inherent barrier properties in aqueous fluids. Pulsatile release profiles and reproducible lag phases of the pursued duration were obtained from systems manufactured by both techniques. This performance was confirmed by double-coated systems, provided with a Kollicoat® MAE outer film that yielded resistance in the acidic stage of the test. Moreover, HM pectin-based coatings manufactured by powder-layering, tested in the presence of bacteria from a Crohn's disease patient, showed earlier release, supporting the role of microbial degradation as a triggering mechanism at the target site. The overall results highlighted viable coating options and in vitro release characteristics, sparking new interest in naturally occurring pectin as a coating agent for oral colon delivery.

The contemplation of amylose for the delivery of ulcerogenic nonsteroidal anti-inflammatory drugs

This manuscript proposes an innovative approach to mitigate the gastrointestinal adversities linked with nonsteroidal anti-inflammatory drugs (NSAIDs) by exploiting amylose as a novel drug delivery carrier. The intrinsic attributes of V-amylose, such as its structural uniqueness, biocompatibility and biodegradability, as well as its capacity to form inclusion complexes with diverse drug molecules, are meticulously explored. Through a comprehensive physicochemical analysis of V-amylose and ulcerogenic NSAIDs, the plausibility of amylose as a protective carrier for ulcerogenic NSAIDs to gastrointestinal regions is elucidated. This review further discusses the potential therapeutic advantages of amylose-based drug delivery systems in the management of gastric ulcers. By providing controlled release kinetics and enhanced bioavailability, these systems offer promising prospects for the development of more effective ulcer therapies.

Guar gum as a microbially degradable component for an oral colon delivery system based on a combination strategy: formulation and in vitro evaluation

Oral colon delivery has widely been pursued exploiting naturally occurring polysaccharides degraded by the resident microbiota. However, their hydrophilicity may hinder the targeting performance. The aim of the present study was to manufacture and evaluate a double-coated delivery system leveraging intestinal microbiota, pH, and transit time for reliable colonic release. This system comprised a tablet core, a hydroxypropyl methylcellulose (HPMC) inner layer and an outer coating based on Eudragit® S and guar gum. The tablets were loaded with paracetamol, selected as a tracer drug because of the well-known analytical profile and lack of major effects on bacterial viability. The HPMC and Eudragit® S layers were applied by film-coating. Tested for in vitro release, the double-coated systems showed gastroresistance in 0.1 N HCl followed by lag phases of consistent duration in phosphate buffer pH 7.4, imparted by the HPMC layer and synergistically extended by the Eudragit® S/guar gum one. In simulated colonic fluid with fecal bacteria from an inflammatory bowel disease patient, release was faster than in the presence of β-mannanase and in control culture medium. The bacteria-containing fluid was obtained by an experimental procedure making multiple tests possible from a single sampling and processing run. Thus, the study conducted proved the feasibility of the delivery system and ability of guar gum to trigger release in the presence of colon bacteria without impairing the barrier properties of the coating. Finally, it allowed an advantageous simulated colonic fluid preparation procedure to be set up, reducing the time, costs, and complexity of testing and enhancing replicability.

Dual stimuli-responsive delivery system for self-regulated colon-targeted delivery of poorly water-soluble drugs

Inflammatory bowel disease (IBD) are chronic inflammatory conditions which cause significant patient morbidity. Local drug delivery to the colon can improve treatment efficacy and reduce side effects associated with IBD treatment. Smart drug delivery systems are designed to regulate the release of therapeutic agents at the desired site of action. pH-responsive drug carriers have been previously utilised for improved oral drug delivery beyond stomach harsh conditions. Additionally, the colon possesses a diverse microbiome secreting bioactive molecules e.g., enzymes, that can be exploited for targeted drug delivery. We herein synthesised and characterised a 2-hydroxyethyl methacrylate and methacrylic acid copolymer, crosslinked with an azobenzyl crosslinker, that displayed pH- and enzyme-responsive properties. The swelling and drug release from hydrogel were analysed in pH 1.2, 6.5 and 7.4 buffers, and in the presence of rat caecal matter using metronidazole and mesalamine as model BCS Class I and IV drugs, respectively. Swelling studies displayed pH-responsive swelling behaviour, where swelling was maximum at pH 7.4 and minimum at pH 1.2 (69 % versus 32 %). Consequently, drug release was limited in gastric and small intestinal conditions but increased significantly when exposed to colonic conditions containing caecal matter. This system displays promising capacity for achieving colon-targeted drug delivery with enhanced dissolution of poorly water-soluble drugs for local treatment of IBD and other colon-targeted therapies.

Aerogels as Carriers for Oral Administration of Drugs: An Approach towards Colonic Delivery

Polysaccharide aerogels have emerged as a highly promising technology in the field of oral drug delivery. These nanoporous, ultralight materials, derived from natural polysaccharides such as cellulose, starch, or chitin, have significant potential in colonic drug delivery due to their unique properties. The particular degradability of polysaccharide-based materials by the colonic microbiota makes them attractive to produce systems to load, protect, and release drugs in a controlled manner, with the capability to precisely target the colon. This would allow the local treatment of gastrointestinal pathologies such as colon cancer or inflammatory bowel diseases. Despite their great potential, these applications of polysaccharide aerogels have not been widely explored. This review aims to consolidate the available knowledge on the use of polysaccharides for oral drug delivery and their performance, the production methods for polysaccharide-based aerogels, the drug loading possibilities, and the capacity of these nanostructured systems to target colonic regions.

Solidification and oral delivery of biologics to the colon- A review

The oral delivery of biologics such as therapeutic proteins, peptides and oligonucleotides for the treatment of colon related diseases has been the focus of increasing attention over the last years. However, the major disadvantage of these macromolecules is their degradation propensity in liquid state which can lead to the undesirable and complete loss of function. Therefore, to increase the stability of the biologic and reduce their degradation propensity, formulation techniques such as solidification can be performed to obtain a stable solid dosage form for oral administration. Due to their fragility, stress exerted on the biologic during solidification has to be reduced with the incorporation of stabilizing excipients into the formulation. This review focuses on the state-of-the-art solidification techniques required to obtain a solid dosage form for the oral delivery of biologics to the colon and the use of suitable excipients for adequate stabilization upon solidification. The solidifying processes discussed within this review are spray drying, freeze drying, bead coating and also other techniques such as spray freeze drying, electro spraying, vacuum- and supercritical fluid drying. Further, the colon as site of absorption in both healthy and diseased state is critically reviewed and possible oral delivery systems for biologics are discussed.

Impact of Peptide Structure on Colonic Stability and Tissue Permeability

Most marketed peptide drugs are administered parenterally due to their inherent gastrointestinal (GI) instability and poor permeability across the GI epithelium. Several molecular design techniques, such as cyclisation and D-amino acid (D-AA) substitution, have been proposed to improve oral peptide drug bioavailability. However, very few of these techniques have been translated to the clinic. In addition, little is known about how synthetic peptide design may improve stability and permeability in the colon, a key site for the treatment of inflammatory bowel disease and colorectal cancer. In this study, we investigated the impact of various cyclisation modifications and D-AA substitutions on the enzymatic stability and colonic tissue permeability of native oxytocin and 11 oxytocin-based peptides. Results showed that the disulfide bond cyclisation present in native oxytocin provided an improved stability in a human colon model compared to a linear oxytocin derivative. Chloroacetyl cyclisation increased native oxytocin stability in the colonic model at 1.5 h by 30.0%, whereas thioether and N-terminal acetylated cyclisations offered no additional protection at 1.5 h. The site and number of D-AA substitutions were found to be critical for stability, with three D-AAs at Tyr, Ile and Leu, improving native oxytocin stability at 1.5 h in both linear and cyclic structures by 58.2% and 79.1%, respectively. Substitution of three D-AAs into native cyclic oxytocin significantly increased peptide permeability across rat colonic tissue; this may be because D-AA substitution favourably altered the peptide's secondary structure. This study is the first to show how the strategic design of peptide therapeutics could enable their delivery to the colon via the oral route.

Microbiota-sensitive drug delivery systems based on natural polysaccharides for colon targeting

Colon targeting is an ongoing challenge, particularly for the oral administration of biological drugs or local treatment of inflammatory bowel disease (IBD). In both cases, drugs are known to be sensitive to the harsh conditions of the upper gastrointestinal tract (GIT) and, thus, must be protected. Here, we provide an overview of recently developed colonic site-specific drug delivery systems based on microbiota sensitivity of natural polysaccharides. Polysaccharides act as a substrate for enzymes secreted by the microbiota located in the distal part of GIT. The dosage form is adapted to the pathophysiology of the patient and, thus, a combination of bacteria-sensitive and time-controlled release or pH-dependent systems can be used for delivery.

Comparison of 5-ASA layered or matrix pellets coated with a combination of ethylcellulose and Eudragits L and S in the treatment of ulcerative colitis in rats

The aim of this study was to evaluate and optimize the combination of time and pH-dependent polymers as a single coating for the design of the colon-specific drug delivery system of 5-aminosalicylic acid (5-ASA) pellets. 5-ASA matrix pellets with a 70% drug load were prepared by the extrusion-spheronization method. The optimal coating formula which included Eudragit S (ES)+Eudragit L (EL)+Ethylcellulose (EC) was predicted for the targeted drug delivery to the colonic area by a 3² factorial design. The ratio of ES:EL:EC and coating level were considered as independent variables while the responses were the release of less than 10% of the drug within 2 h (Y₁), the release of 60-70% within 10 h at pH 6.8 (Y₂) and lag time of less than 1 h at pH 7.2 (Y₃). Also, 5-ASA layered pellets were prepared by the powder layering of 5-ASA on nonpareils (0.4-0.6 mm) in a fluidized bed coater and then coated with the same optimum coating composition. The coated 5-ASA layered or matrix pellets were tested in a rat model of ulcerative colitis (UC) and compared with the commercial form of 5-ASA pellets (Pentasa®). The ratio of ES:EL:EC of 33:52:15 w/w at a coating level of 7% was discovered as the optimum coating for the delivery of 5-ASA matrix pellets to the colon. The coated 5-ASA pellets were spherical with uniform coating as shown by SEM and met all of our release criteria as predicted. In-vivo studies demonstrated that the optimum 5-ASA layered or matrix pellets had superior anti-inflammatory activities than Pentasa® in terms of colitis activity index (CAI), colon damage score (CDS), colon/body weight ratio and colon's tissue enzymes of glutathione (GSH) and malondialdehyde (MDA). The optimum coating formulation showed a high potential for colonic delivery of 5-ASA layered or matrix pellets and triggered drug release based on pH and time.

Advances in Oral Drug Delivery Systems: Challenges and Opportunities

The oral route is the most preferred route for systemic and local drug delivery. However, the oral drug delivery system faces the harsh physiological and physicochemical environment of the gastrointestinal tract, which limits the bioavailability and targeted design of oral drug delivery system. Innovative pharmaceutical approaches including nanoparticulate formulations, biomimetic drug formulations, and microfabricated devices have been explored to optimize drug targeting and bioavailability. In this review, the anatomical factors, biochemical factors, and physiology factors that influence delivering drug via oral route are discussed and recent advance in conventional and novel oral drug delivery approaches for improving drug bioavailability and targeting ability are highlighted. We also address the challenges and opportunities of oral drug delivery systems in future.

In vitro and in vivo evaluation of a pH-, microbiota- and time-based oral delivery platform for colonic release

Several formulation strategies have been proposed for oral colon delivery, particularly for the therapy of inflammatory bowel disease (IBD). However, targeting the large intestine remains a challenging goal. The aim of this study was to develop and evaluate a novel type of drug delivery system, which is based on multiple drug release triggers for reliable performance. The system consists of: (i) a drug core, (ii) an inner swellable low-viscosity hydroxypropyl methylcellulose (HPMC) layer, and (iii) an outer film coating based on a Eudragit® S:high-methoxyl (HM) pectin (7:3 w/w) blend, optionally containing chitosan. Convex immediate release tablets (2 or 4 mm in diameter) containing paracetamol or 5-aminosalicylic acid (5-ASA) were coated in a fluid bed. The double-coated tablets exhibited pulsatile release profiles when changing the release medium from 0.1 N HCl to phosphate buffer pH 7.4. Also, drug release was faster in simulated colonic fluid (SCF) in the presence of fecal bacteria from IBD patients compared to control culture medium from tablets with outer Eudragit® S: HM pectin: chitosan coatings. The latter systems showed promising results in the control of the progression of colitis and alteration of the microbiota in a preliminary rat study.

Tablet formulation with dual control concept for efficient colonic drug delivery

Aim of this study was to develop a tablet formulation for targeted colonic drug release by implementing two control mechanisms: A pH-sensitive coating layer based on Eudragit® FS 30 D to prevent drug release in the upper gastrointestinal tract, combined with a matrix based on plant-derived polysaccharide xyloglucan to inhibit drug release after coating removal in the small intestine and to allow microbiome triggered drug release in the colon. In vitro dissolution tests simulated the passage through the entire gastrointestinal tract with a four-stage protocol, including microbial xyloglucanase addition in physiologically relevant concentrations as microbiome surrogate to the colonic dissolution medium. Matrix erosion was monitored in parallel to drug release by measurement of reducing sugar equivalents resulting from xyloglucan hydrolysis. Limited drug release in gastric and small intestinal test stages and predominant release in the colonic stage was achieved. The xyloglucan matrix controlled drug release after dissolution of the enteric coating through the formation of a gummy polysaccharide layer at the tablet surface. Matrix degradation was dependent on enzyme concentration in the colonic medium and significantly accelerated drug release resulting in erosion-controlled release process. Drug release at physiologically relevant enzyme concentration was completed within the bounds of colonic transit time. The dual control concept was applicable to two drug substances with different solubility, providing similar release rates in colonic environment containing xyloglucanase. Drug solubility mechanistically affected release, with diffusion of caffeine, but not of 5-ASA, contributing to the overall release rate out of the matrix tablet.

Colonic drug delivery: Formulating the next generation of colon-targeted therapeutics

Colonic drug delivery can facilitate access to unique therapeutic targets and has the potential to enhance drug bioavailability whilst reducing off-target effects. Delivering drugs to the colon requires considered formulation development, as both oral and rectal dosage forms can encounter challenges if the colon's distinct physiological environment is not appreciated. As the therapeutic opportunities surrounding colonic drug delivery multiply, the success of novel pharmaceuticals lies in their design. This review provides a modern insight into the key parameters determining the effective design and development of colon-targeted medicines. Influential physiological features governing the release, dissolution, stability, and absorption of drugs in the colon are first discussed, followed by an overview of the most reliable colon-targeted formulation strategies. Finally, the most appropriate in vitro, in vivo, and in silico preclinical investigations are presented, with the goal of inspiring strategic development of new colon-targeted therapeutics.

Time-Based Formulation Strategies for Colon Drug Delivery

Despite poor absorption properties, delivery to the colon of bioactive compounds administered by the oral route has become a focus of pharmaceutical research over the last few decades. In particular, the high prevalence of Inflammatory Bowel Disease has driven interest because of the need for improved pharmacological treatments, which may provide high local drug concentrations and low systemic exposure. Colonic release has also been explored to deliver orally biologics having gut stability and permeability issues. For colon delivery, various technologies have been proposed, among which time-dependent systems rely on relatively constant small intestine transit time. Drug delivery platforms exploiting this physiological feature provide a lag time programmed to cover the entire small intestine transit and control the onset of release. Functional polymer coatings or capsule plugs are mainly used for this purpose, working through different mechanisms, such as swelling, dissolution/erosion, rupturing and/or increasing permeability, all activated by aqueous fluids. In addition, enteric coating is generally required to protect time-controlled formulations during their stay in the stomach and rule out the influence of variable gastric emptying. In this review, the rationale and main delivery technologies for oral colon delivery based on the time-dependent strategy are presented and discussed.

In vitro evaluation of the gastrointestinal delivery of acid-sensitive pancrelipase in a next generation enteric capsule using an exocrine pancreatic insufficiency disease model

The dissolution characteristics of five capsules (Next Generation Enteric [NGE], Vcaps® Enteric [VCE], VCE DUOCAP® [VCE/VCE] system, Hard Gelatin Capsule [HGC] as negative control, and Creon® 10,000 U as market reference) were evaluated using an in vitro simulation of the stomach and upper intestinal tract with an acidic duodenal incubation (pH 4.5 for the first 10 min, pH 6 for the remaining 17 min) to simulate exocrine pancreatic insufficiency. Caffeine was a marker of capsule dissolution, and tributyrin to butyrate conversion measured pancrelipase activity. All capsules were filled with pancrelipase; the NGE, VCE, VCE/VCE, and HGC capsules also contained 50 mg caffeine. Caffeine was released first from the HGC capsule, followed by the VCE, NGE, and VCE/VCE capsules. Pancrelipase activity followed this trend and demonstrated a similar activity level over time for the NGE, VCE/VCE, and Creon® capsules. The HGC formulation confirmed gastric degradation of unprotected pancrelipase. NGE capsules provided similar protection to the simple fill formulation as observed for the complex formulation of the Creon® capsule in a setting with increased pepsin activity and may hasten the time needed to go from formula development to first-in-human studies for pH sensitive drugs or those requiring small intestine targeting.

Updates on conventional therapies for inflammatory bowel diseases: 5-aminosalicylates, corticosteroids, immunomodulators, and anti-TNF-α

The incidence and prevalence of inflammatory bowel diseases (IBDs) are rapidly increasing worldwide. IBDs are considered an emerging problem not only in Western countries but also in developing counties. The relapses and complications of active IBD mandate various medications. Nevertheless, hospitalization, emergency room visits, or surgery may be required, resulting in a socioeconomic burden. Great advances have been made in the development of new therapeutic options for IBD to achieve induction and maintenance remission. Nevertheless, conventional therapy is still the mainstay in the treatment of IBD. This review article provides an update on recent advances in conventional therapies, including 5-aminosalicylates, corticosteroids, immunomodulators, and anti-tumor necrosis factor-α agents to treat IBD.

The effect of esomeprazole on the upper GI tract release and systemic absorption of mesalazine from colon targeted formulations

The aim of the present study was to investigate the effect of coadministration of the proton pump inhibitor (PPI) esomeprazole on the upper GI tract behavior and systemic exposure of mesalazine from two mechanistically different colon targeted delivery systems: Claversal (pH-dependent release) and Pentasa (prolonged release). To this end, gastric, jejunal and systemic concentrations of mesalazine and its metabolite N-acetyl mesalazine were monitored in 5 healthy volunteers following oral intake of Pentasa or Claversal with or without PPI pre-treatment (cross-over study). Our exploratory study demonstrated that pre-treatment with a PPI may affect the release and absorption of mesalazine from formulations with different modified release mechanisms. Upon intake of Claversal, the onset of mesalazine absorption was accelerated substantially by PPI pre-treatment. While the PPI-induced increase in pH initiated the disintegration process already in the upper GI tract, the release of mesalazine started beyond the proximal jejunum. Upon intake of Pentasa, PPI pre-treatment seemed to increase the systemic exposure, even though the underlying mechanism could not be revealed yet. The faster release of mesalazine in the GI tract and/or the increased systemic absorption following PPI pre-treatment may reduce the ability of mesalazine to reach the colon. Future research assessing mesalazine disposition in the lower GI tract is warranted.

Active Machine learning for formulation of precision probiotics

It is becoming clear that the human gut microbiome is critical to health and well-being, with increasing evidence demonstrating that dysbiosis can promote disease. Increasingly, precision probiotics are being investigated as investigational drug products for restoration of healthy microbiome balance. To reach the distal gut alive where the density of microbiota is highest, oral probiotics should be protected from harsh conditions during transit through the stomach and small intestines. At present, few probiotic formulations are designed with this delivery strategy in mind. This study employs an emerging machine learning (ML) technique, known as active ML, to predict how excipients at pharmaceutically relevant concentrations affect the intestinal proliferation of a common probiotic, Lactobacillus paracasei. Starting with a labelled dataset of just 6 bacteria-excipient interactions, active ML was able to predict the effects of a further 111 excipients using uncertainty sampling. The average certainty of the final model was 67.70% and experimental validation demonstrated that 3/4 excipient-probiotic interactions could be correctly predicted. The model can be used to enable superior probiotic delivery to maximise proliferation in vivo and marks the first use of active ML in microbiome science.

Hemoglobin bio-adhesive nanoparticles as a colon-specific delivery system for sustained release of 5-aminosalicylic acid in the effective treatment of inflammatory bowel disease

A colonic drug delivery system was developed to specifically deliver 5-aminosalicylic acid (5-ASA) to the inflamed site by conjugating with hemoglobin nanoparticles (HbNPs). The 5-ASA-HbNPs (eight 5-ASA molecules per Hb molecule) with the size of 220 nm and zeta potential of -14.6 mV is a tailored nanoparticle able to pass through the mucus layer. The 5-ASA-HbNPs do not undergo chemical and enzymatic hydrolysis in the simulated gastrointestinal fluids over 6 h. Significantly higher cellular uptakes and prolonged release was seen for the 5-ASA-HbNPs in Caco-2 cells, compared to free 5-ASA over 72 h. In addition, 5-ASA-HbNPs revealed similar therapeutic effectiveness with free 5-ASA against tumor necrosis factor and showed less inhibitory concentration (IC50) for myeloperoxidase enzyme activity. In vivo imaging of mouse demonstrated the localization of drug in the descending colon after oral administration and about 15% of the administered dose was recovered as 5-ASA from urine in 6 h. The use of these nanoparticles with the mucus adhesion properties and permeability to intestinal epithelial cells can be a good candidate with potential application in the colonic drug delivery field.

Clinical translation of advanced colonic drug delivery technologies

Targeted drug delivery to the colon offers a myriad of benefits, including treatment of local diseases, direct access to unique therapeutic targets and the potential for increasing systemic drug bioavailability and efficacy. Although a range of traditional colonic delivery technologies are available, these systems exhibit inconsistent drug release due to physiological variability between and within individuals, which may be further exacerbated by underlying disease states. In recent years, significant translational and commercial advances have been made with the introduction of new technologies that incorporate independent multi-stimuli release mechanisms (pH and/or microbiota-dependent release). Harnessing these advanced technologies offers new possibilities for drug delivery via the colon, including the delivery of biopharmaceuticals, vaccines, nutrients, and microbiome therapeutics for the treatment of both local and systemic diseases. This review details the latest advances in colonic drug delivery, with an emphasis on emerging therapeutic opportunities and clinical technology translation.

In Vitro Methodologies for Evaluating Colon-Targeted Pharmaceutical Products and Industry Perspectives for Their Applications

Several locally acting colon-targeted products to treat colonic diseases have been recently developed and marketed, taking advantage of gastrointestinal physiology to target delivery. Main mechanisms involve pH-dependent, time-controlled and/or enzymatic-triggered release. With site of action located before systemic circulation and troublesome colonic sampling, there is room for the introduction of meaningful in vitro methods for development, quality control (QC) and regulatory applications of these formulations. A one-size-fits-all method seems unrealistic, as the selection of experimental conditions should resemble the physiological features exploited to trigger the release. This article reviews the state of the art for bio-predictive dissolution testing of colon-targeted products. Compendial methods overlook physiological aspects, such as buffer molarity and fluid composition. These are critical for pH-dependent products and time-controlled systems containing ionizable drugs. Moreover, meaningful methods for enzymatic-triggered products including either bacteria or enzymes are completely ignored by pharmacopeias. Bio-predictive testing may accelerate the development of successful products, although this may require complex methodologies. However, for high-throughput routine testing (e.g., QC), simplified methods can be used where balance is struck between simplicity, robustness and transferability on one side and bio-predictivity on the other. Ultimately, bio-predictive methods can occupy a special niche in terms of supplementing plasma concentration data for regulatory approval.

Matrix tablets based on a novel poly (magnesium acrylate) hydrogel for the treatment of inflammatory bowel diseases

The objective of this work was to evaluate the potential use of a new polymer (PAMgA) in the development sustained release matrix tablets for the treatment of bowel inflammatory diseases. For this purpose, budesonide, a highly lipophilic compound, was used as model drug. Tablets with two reticulation grades of PAMgA (PAMgA 5 and 40) and with 9 mg of budesonide were developed and characterized. All the studies were carried out using biorelevant media (FaSSGF and FaSSIF). Swelling and erosion of PAMgA tablets was influenced by the reticulation grade of the polymer and the biorelevant media assayed, being water uptake higher for PAMgA 40 tablets in intestinal fluid, whereas PAMgA 5 showed more intense erosion in this biorelevant medium. Budesonide was released slowly from PAMgA tablets, both in gastric and intestinal environment, following Super case II transport kinetics (relaxation-controlled delivery), with a lag time of around 1-2 h. When the dissolution medium was changed sequentially throughout the trial, 75% of the budesonide dose was released in a sustained manner between 4 and 20 h of testing from PAMgA tablets, showing a more controlled budesonide release than Entocort® and Budenofalk® (commercially available sustained release formulations of budesonide). In conclusion, PAMgA polymer allows controlling the release of highly lipophilic drugs as budesonide, being an useful excipient for the development of sustained release matrix tablets.

pH-Responsive Alginate-Based Microparticles for Colon-Targeted Delivery of Pure Cyclosporine A Crystals to Treat Ulcerative Colitis

Cyclosporine A (CsA) is a potent immunosuppressant for treating ulcerative colitis (UC). However, owing to severe systemic side effects, CsA application in UC therapy remains limited. Herein, a colon-targeted drug delivery system consisting of CsA crystals (CsAc)-loaded, Eudragit S 100 (ES)-coated alginate microparticles (CsAc-EAMPs) was established to minimize systemic side effects and enhance the therapeutic efficacy of CsA. Homogeneously-sized CsAs (3.1 ± 0.9 μm) were prepared by anti-solvent precipitation, followed by the fabrication of 47.1 ± 6.5 μm-sized CsAc-EAMPs via ionic gelation and ES coating. CsAc-EAMPs exhibited a high drug loading capacity (48 ± 5%) and a CsA encapsulation efficacy of 77 ± 9%. The in vitro drug release study revealed that CsA release from CsAc-EAMPs was suppressed under conditions simulating the stomach and small intestine, resulting in minimized systemic absorption and side effects. Following exposure to the simulated colon conditions, along with ES dissolution and disintegration of alginate microparticles, CsA was released from CsAc-EAMPs, exhibiting a sustained-release profile for up to 24 h after administration. Given the effective colonic delivery of CsA molecules, CsAc-EAMPs conferred enhanced anti-inflammatory activity in mouse model of dextran sulfate sodium (DSS)-induced colitis. These findings suggest that CsAc-EAMPs is a promising drug delivery system for treating UC.

Pathways for Oral and Rectal Delivery of Gold Nanoparticles (1.7 nm) and Gold Nanoclusters into the Colon: Enteric-Coated Capsules and Suppositories

Two ways to deliver ultrasmall gold nanoparticles and gold-bovine serum albumin (BSA) nanoclusters to the colon were developed. First, oral administration is possible by incorporation into gelatin capsules that were coated with an enteric polymer. These permit the transfer across the stomach whose acidic environment damages many drugs. The enteric coating dissolves due to the neutral pH of the colon and releases the capsule's cargo. Second, rectal administration is possible by incorporation into hard-fat suppositories that melt in the colon and then release the nanocarriers. The feasibility of the two concepts was demonstrated by in-vitro release studies and cell culture studies that showed the easy redispersibility after dissolution of the respective transport system. This clears a pathway for therapeutic applications of drug-loaded nanoparticles to address colon diseases, such as chronic inflammation and cancer.

Comparison of protection and release behavior of different capsule polymer combinations based on L. acidophilus survivability and function and caffeine release

Oral administration of active pharmaceutical ingredients, nutraceuticals, enzymes or probiotics requires an appropriate delivery system for optimal bioactivity and absorption. The harsh conditions during the gastrointestinal transit can degrade the administered products, hampering their efficacy. Enteric or delayed-release pharmaceutical formulations may help overcome these issues. In a Simulator of Human Intestinal Microbial Ecosystem model (SHIME) and using caffeine as a marker for release kinetics and L. acidophilus survivability as an indicator for protection, we compared the performance of ten capsule configurations, single or DUOCAP® combinations. The function of L. acidophilus and its impact on the gut microbiota was further tested in three selected capsule types, combinations of DRcaps® capsule in DRcaps® capsule (DR-in-DR) and DRcaps® capsule in Vcaps® capsule (DR-in-VC) and single Vcaps® Plus capsule under colonic conditions. We found that under stomach and small intestine conditions, DR-in-DR and DR-in-VC led to the best performance both under fed and fasted conditions based on the slow caffeine release and the highest L. acidophilus survivability. The Vcaps® Plus capsule however, led to the quickest caffeine and probiotic release. When DR-in-DR, DR-in-VC and single Vcaps® Plus capsules were tested through the whole gastrointestinal tract, including under colonic conditions, caffeine release was found to be slower in capsules containing DRcaps® capsules compared to the single Vcaps® capsules. In addition, colonic survival of L. acidophilus was significantly increased under fasted conditions in DR-in-DR or DR-in-VC formulation compared to Vcaps® Plus capsule. To assess the impact of these formulations on the microbial function, acetate, butyrate and propionate as well as ammonia were measured. L. acidophilus released from DR-in-DR or DR-in-VC induced a significant increase in butyrate and a decrease in ammonia, suggesting a proliferation of butyrate-producing bacteria and reduction in ammonia-producing bacteria. These data suggest that L. acidophilus included in DR-in-DR or DR-in-VC reaching the colon is viable and functional, potentially contributing to changes in colonic microbiota composition and diversity.

Mesalazine and inflammatory bowel disease - From well-established therapies to progress beyond the state of the art

Inflammatory bowel disease incidence has been constantly rising for the past few decades. Current therapies attempt to mitigate its symptoms since no cure is established. The most commonly prescribed drug for these patients is 5-aminosalicylic acid (5-ASA). Due to the low rate and seriousness of side effects compared to other therapies, 5-ASA is still largely prescribed in many stages of inflammatory bowel disease, including scenarios where evidence suggests low effectiveness. Although commercialized formulations have come a long way in improving pharmacokinetics, it is still necessary to design and develop novel delivery systems capable of increasing effectiveness at different stages of the disease. In particular, micro- and nano-sized particles might be the key to its success in Crohn's disease and in more serious disease stages. This review provides an overview on the clinical significance of 5-ASA formulations, its limitations, challenges, and the most recent micro- and nanoparticle delivery systems being designed for its controlled release. Emergent alternatives for 5-ASA are also discussed, as well as the future prospects for its application in inflammatory bowel disease therapies.

Predicting drug-microbiome interactions with machine learning

Pivotal work in recent years has cast light on the importance of the human microbiome in maintenance of health and physiological response to drugs. It is now clear that gastrointestinal microbiota have the metabolic power to promote, inactivate, or even toxify the efficacy of a drug to a level of clinically relevant significance. At the same time, it appears that drug intake has the propensity to alter gut microbiome composition, potentially affecting health and response to other drugs. Since the precise composition of an individual's microbiome is unique, one's drug-microbiome relationship is similarly unique. Thus, in the age of evermore personalised medicine, the ability to predict individuals' drug-microbiome interactions is highly sought. Machine learning (ML) offers a powerful toolkit capable of characterising and predicting drug-microbiota interactions at the individual patient level. ML techniques have the potential to learn the mechanisms operating drug-microbiome activities and measure patients' risk of such occurrences. This review will outline current knowledge at the drug-microbiota interface, and present ML as a technique for examining and forecasting personalised drug-microbiome interactions. When harnessed effectively, ML could alter how the pharmaceutical industry and healthcare professionals consider the drug-microbiome axis in patient care.

The influence of the gut microbiota on the bioavailability of oral drugs

Due to its safety, convenience, low cost and good compliance, oral administration attracts lots of attention. However, the efficacy of many oral drugs is limited to their unsatisfactory bioavailability in the gastrointestinal tract. One of the critical and most overlooked factors is the symbiotic gut microbiota that can modulate the bioavailability of oral drugs by participating in the biotransformation of oral drugs, influencing the drug transport process and altering some gastrointestinal properties. In this review, we summarized the existing research investigating the possible relationship between the gut microbiota and the bioavailability of oral drugs, which may provide great ideas and useful instructions for the design of novel drug delivery systems or the achievement of personalized medicine.

Effect of Elevated pH on the Commercial Enteric-Coated Omeprazole Pellets Resistance: Patent Review and Multisource Generics Comparison

Omeprazole is a widely used over-the-counter (20 mg) proton pump inhibitor, usually supplied as oral enteric-coated pellets intended to release at pH 5.5 and higher; however, it is sensitive to acidic pH. The likelihood of elevated gastric pH in practice is very high for patients; thus, the aim of this study was to investigate the effect of elevated pH on the performance of commercial omeprazole pellets. Commercial enteric-coated delayed-release pellets were tested with water uptake-weight loss (WU-WL) test at pH range between 1.2 and 4.5 in addition to "gastric" (pH 1.2 or 4.5) and "intestinal" (pH 7.4) phase dissolution tests. The range of physical characteristics of pellets was determined with a single pellet size and sedimentation time measurement, followed by the application of modified Stokes' Law equation. The coefficient of variation of pellet size and density, and volume-density determination coefficient (R²) as descriptors of coating thickness and microstructure variability, degree of ionisation of enteric polymers, aqueous solubility and molecular weight of plasticisers have been found useful to explain commercial delayed-release pellets behaviour during WU-WL and dissolution test. Investigated commercial delayed-release pellets demonstrated pH-dependent WU-WL results. "Gastric phase" dissolution testing of pellets at pH 4.5 showed the highest omeprazole degradation (48.1%) for Nosch Labs, intermediate values of dose loss (23.4% and 17.1%) for Teva and UQUIFA delayed-release pellets, respectively. Lab Liconsa pellets have been found as the least susceptible (3.2% of dose loss). Additionally, "gastric phase" dissolution test at pH 4.5 significantly influenced omeprazole release during the "intestinal phase". The risk of inadequate therapy associated with intake of investigated enteric-coated delayed-release pellets at elevated gastric pH has been found as minimal for Lab Liconsa and has increased from UQUIFA and Teva to Nosh Labs pellets.

5-Aminolevulinic Acid as a Novel Therapeutic for Inflammatory Bowel Disease

5-Aminolevulinic acid (5-ALA) is a naturally occurring nonprotein amino acid licensed as an optical imaging agent for the treatment of gliomas. In recent years, 5-ALA has been shown to possess anti-inflammatory and immunoregulatory properties through upregulation of heme oxygenase-1 via enhancement of porphyrin, indicating that it may be beneficial for the treatment of inflammatory conditions. This study systematically examines 5-ALA for use in inflammatory bowel disease (IBD). Firstly, the ex vivo colonic stability and permeability of 5-ALA was assessed using human and mouse fluid and tissue. Secondly, the in vivo efficacy of 5-ALA, in the presence of sodium ferrous citrate, was investigated via the oral and intracolonic route in an acute DSS colitis mouse model of IBD. Results showed that 5-ALA was stable in mouse and human colon fluid, as well as in colon tissue. 5-ALA showed more tissue restricted pharmacokinetics when exposed to human colonic tissue. In vivo dosing demonstrated significantly improved colonic inflammation, increased local heme oxygenase-1 levels, and decreased concentrations of proinflammatory cytokines TNF-α, IL-6, and IL-1β in both plasma and colonic tissue. These effects were superior to that measured concurrently with established anti-inflammatory treatments, ciclosporin and 5-aminosalicylic acid (mesalazine). As such, 5-ALA represents a promising addition to the IBD armamentarium, with potential for targeted colonic delivery.

Mimicking the dynamic Colonic microbiota in vitro to gain a better understanding on the in vivo metabolism of xenobiotics: Degradation of sulfasalazine

Due to the potential effects of colonic metabolism, the interest in the composition and action of intestinal microbiota has increased significantly throughout the last 10 years. Recently focus is turning to the development and implementation of in vitro tools closely simulating in vivo colonic metabolic processes suitable for routine use. The aim of the present study is to compare the metabolization of the model drug sulfasalazine utilizing the novel dynamic bioreactor MimiCol and a standard static batch fermenter inoculated with cryopreserved faecal microbiota. Major advantages of the novel bioreactor MimiCol are the smaller media volume which is closer to in vivo conditions, the possibility to perform media changes and the closer simulation of in vivo mixing patterns. The study proved that the MimiCol is able to simulate the dynamic conditions found within the ascending colon. The dynamic conditions within the MimiCol led to an almost 2-fold increase of the metabolization rate constant in comparison to the static batch fermenter. Our study was able to prove that the novel dynamic bioreactor MimiCol is able to closely simulate physiologically relevant conditions.