Engineering of a novel adjuvant based on lipid-polymer hybrid nanoparticles: A quality-by-design approach

Deciphering the Lipid-Random Copolymer Interactions and Encoding Their Properties to Design a Hybrid System

Lipid/copolymer colloidal systems are deemed hybrid materials with unique properties and functionalities. Their hybrid nature leads to complex interfacial phenomena, which have not been fully encoded yet, navigating their properties. Moving toward in-depth knowledge of such systems, a comprehensive investigation of them is imperative. In the present study, hybrid lipid/copolymer structures were fabricated and examined by a gamut of techniques, including dynamic light scattering, fluorescence spectroscopy, cryogenic transmission electron microscopy, microcalorimetry, and high-resolution ultrasound spectroscopy. The biomaterials that were mixed for this purpose at different ratios were 1,2-dioctadecanoyl-sn-glycero-3-phosphocholine and four different linear, statistical (random) amphiphilic copolymers, consisting of oligo(ethylene glycol) methyl ether methacrylate as the hydrophilic comonomer and lauryl methacrylate as the hydrophobic one. The colloidal dispersions were studied for lipid/copolymer interactions regarding their physicochemical, morphological, and biophysical behavior. Their membrane properties and interactions with serum proteins were also studied. The aforementioned techniques confirmed the hybrid nature of the systems and the location of the copolymer in the structure. More importantly, the random architecture of the copolymers, the hydrophobic-to-hydrophilic balance of the nanoplatforms, and the lipid-to-polymer ratio are highlighted as the main design-influencing factors. Elucidating the lipid/copolymer interactions would contribute to the translation of hybrid nanoparticle performance and, thus, their rational design for multiple applications, including drug delivery.

Antitumor activity of essential oils-based nanostructured lipid carriers on prostate cancer cells

Prostate cancer (PCa) is the second most frequent malignancy in men worldwide. Essential oils (EOs) are natural products which can act in cancer suppression by several mechanisms. In this work, a nanotechnological approach was used to develop and evaluate the antineoplastic effects of EOs loaded by nanostructured lipid carriers (NLCs). Three different NLC systems composed of cinnamon, sage or thyme EOs were optimized using factorial design (23). The optimal formulations were characterized in terms of biophysical parameters, structure, stability, in vivo safety and efficacy. All optimized NLC formulations exhibited excellent structural properties and stability over a year (25 °C). They proved to be in vitro and in vivo biocompatible on PNT2 normal prostate cells and on chicken embryos (CE), respectively. In PC3 PCa cells, optimized NLCs inhibited cell proliferation and migration and changed its morphology. In CE xenograft tumor, NLCs have inhibited tumor growth and angiogenesis. The results from this work suggested that all developed EO-based NLC formulations had their stability improved while the biological activity remains unchanged.

Dasatinib loaded mucoadhesive lecithin-chitosan hybrid nanoparticles for its augmented oral delivery, in-vitro efficacy and safety

Dasatinib (DAS) is an oral tyrosine kinase inhibitor; however, its efficacy is significantly subsided by its low oral bioavailability. The present research aimed to improve DAS's oral delivery and efficacy in triple-negative breast cancer by fabricating its mucoadhesive lecithin-chitosan hybrid nanoparticles (DAS-L/CS-NPs). DAS-L/CS-NPs were optimized using Box-Behnken design which showed mean particle size and percent entrapment efficiency of 179.7 ± 5.42 nm and 64.65 ± 0.06 %, respectively. DAS-L/CS-NPs demonstrated sustained release profile in different release media up to 48 h and showed 10 times higher apparent permeability coefficient and flux than free DAS suspension. The binding of DAS-L/CS-NPs to the mucus layer was demonstrated via ex-vivo mucoadhesion study and change in absorbance using turbidimetry. In cell culture studies, DAS-L/CS-NPs revealed a 4.14-fold decrease in IC50, significantly higher cellular uptake and mitochondrial membrane depolarization, 3.82-fold increased reactive oxygen species generation and 2.10-fold enhanced apoptosis in MDA-MB-231 cells than free DAS. In in-vivo pharmacokinetic assessment, DAS-L/CS-NPs showed a 5.08-fold and 3.74-fold rise in AUC (0-t) and Cmax than free DAS suspension, respectively. An acute toxicity study revealed a good safety profile of DAS-L/CS-NPs. In a nutshell, proposed hybrid nanoparticles are promising carriers for improved oral delivery of poorly water-soluble drugs.

Biophysical characterization of α-glucan nanoparticles encapsulating feruloylated soy glycerides (FSG)

Water insoluble α-glucans that were enzymatically synthesized using glucansucrase that was cloned from Leuconostoc mesenteroides NRRL B-1118 were previously shown to form nanoparticles via high pressure homogenization. These α-glucan nanoparticles were previously shown capable of encapsulating a small hydrophobic molecule. This work demonstrates that the same α-glucan can be formed into nanoparticles that encapsulate feruloylated soy glycerides from modified soybean oil, a product of interest to the cosmetic and skin care industries because of the UV absorbance and antioxidant properties of the feruloyl moiety. It is demonstrated that the feruloylated soy glyceride/α-glucan nanoparticles have distinct size, zeta potential and thermal profiles from that of nanoparticles made from α-glucan alone or feruloylated soy glyceride alone. Thermal analysis also demonstrates the release of feruloylated soy glycerides from the α-glucan nanoparticles.

Method of manufacturing CAF®09 liposomes affects immune responses induced by adjuvanted subunit proteins

The ability to induce antigen-specific CD4+ and CD8+T-cell responses is one of the fundamental requirements when developing new efficacious vaccines against challenging infectious diseases and cancer. However, no adjuvants are currently approved for human subunit vaccines that induce T-cell immunity. Here, we incorporated a Toll-like receptor 4 agonist, i.e., the ionizable lipidoid L5N12, in the liposomal cationic adjuvant formulation 09 (CAF®09), and found that modified CAF®09 liposomes possess preserved adjuvant function as compared to unmodified CAF®09. CAF®09 consists of the cationic lipid dimethyldioctadecylammonium (DDA), monomycoloyl glycerol analogue 1 (MMG-1), and polyinosinic:polycytidylic acid [poly(I:C)]. By using the microfluidic mixing technology for liposome preparation, we gradually replaced DDA with L5N12, while keeping the molar ratios of MMG-1 and poly(I:C) constant. We found that this type of modification resulted in colloidally stable liposomes, which were significantly smaller and displayed reduced surface charge as compared to unmodified CAF®09, prepared by using the conventional thin film method. We showed that incorporation of L5N12 decreases the membrane rigidity of CAF®09 liposomes. Furthermore, vaccination with antigen adjuvanted with L5N12-modified CAF®09 or antigen adjuvanted with unmodified CAF®09, respectively, induced comparable antigen-specific serum antibody titers. We found that antigen adjuvanted with L5N12-modified CAF®09 induced antigen-specific effector and memory CD4+ and CD8+T-cell responses in the spleen comparable to those induced when unmodified CAF®09 was used as adjuvant. However, incorporating L5N12 did not have a synergistic immunopotentiating effect on the antibody and T-cell responses induced by CAF®09. Moreover, vaccination with antigen adjuvanted with unmodified CAF®09, which was manufactured by using microfluidic mixing, induced significantly lower antigen-specific CD4+ and CD8+T-cell responses than vaccination with antigen adjuvanted with unmodified CAF®09, which was prepared by using the thin film method. These results show that the method of manufacturing affects CAF®09 liposome adjuvanted antigen-specific immune responses, which should be taken into consideration when evaluating immunogenicity of subunit protein vaccines.

Evolution of Vaccines Formulation to Tackle the Challenge of Anti-Microbial Resistant Pathogens

The increasing diffusion of antimicrobial resistance (AMR) across more and more bacterial species emphasizes the urgency of identifying innovative treatment strategies to counter its diffusion. Pathogen infection prevention is among the most effective strategies to prevent the spread of both disease and AMR. Since their discovery, vaccines have been the strongest prophylactic weapon against infectious diseases, with a multitude of different antigen types and formulative strategies developed over more than a century to protect populations from different pathogens. In this review, we review the main characteristics of vaccine formulations in use and under development against AMR pathogens, focusing on the importance of administering multiple antigens where possible, and the challenges associated with their development and production. The most relevant antigen classes and adjuvant systems are described, highlighting their mechanisms of action and presenting examples of their use in clinical trials against AMR. We also present an overview of the analytical and formulative strategies for multivalent vaccines, in which we discuss the complexities associated with mixing multiple components in a single formulation. This review emphasizes the importance of combining existing knowledge with advanced technologies within a Quality by Design development framework to efficiently develop vaccines against AMR pathogens.

Ribociclib Hybrid Lipid-Polymer Nanoparticle Preparation and Characterization for Cancer Treatment

Ribociclib is a newly approved orally administered drug for breast cancer. This study aimed to prepare, characterize, and evaluate hybrid lipid-polymer nanoparticles (PLNs) of ribociclib to enhance its in vitro dissolution rate, pharmacokinetics, and anticancer efficacy. Ribociclib-loaded PLNs were prepared by solvent evaporation using the Box-Behnken design to optimize formulation variables. Particle size, entrapment efficiency, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM), in vitro release cytotoxicity, molecular modeling, and pharmacokinetic studies were examined. The ribociclib-loaded PLN (formula 1, F1) was optimized in terms of particle size (266.9 ± 4.61 nm) and encapsulation efficiency (59.1 ± 2.57 mg/mL). DSC and thermogravimetric characterization showed the absence of a crystalline structure in the prepared PLNs, confirmed by FTIR, and showed no interactions between the components and the drug. AFM showed well-dispersed heterogeneously shaped nanoparticles. The in vitro release profile exhibited significant results for the optimized formula, reaching 100% at 600 and 90 min at pH 6.8 and 1.2, respectively. The low IC₅₀ obtained by the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay suggests that optimized PLN might serve as an effective delivery vehicle for cancer treatment, especially breast and lung cancer. Molecular modeling revealed several hydrogen bonds. A pharmacokinetic study in rats showed that the ribociclib formula had a 6.5-fold increase in maximum concentration (C_max) and a 5.6-fold increase in area under the curve (AUC). Regarding the everted intestinal sac absorption, formula 1 increased ribociclib penetration relative to the physical combination and pure medication. In conclusion, optimized PLNs with enhanced physicochemical and cytotoxic properties and improved pharmacokinetic parameters were successfully prepared.

Gene Reprogramming Armed Macrophage Membrane-Camouflaged Nanoplatform Enhances Bionic Targeted Drug Delivery to Solid Tumor for Synergistic Therapy

Efficient drug delivery to solid tumors remains a challenge. HER2-positive (HER2⁺) tumors are an aggressive cancer subtype with a resistance to therapy, high risk of relapse, and poor prognosis. Although nanomedicine technology shows obvious advantages in tumor treatment, its potential clinical translation is still impeded by the unsatisfactory delivery and therapeutic efficacy. In this study, a gene reprogramming macrophage membrane-encapsulated drug-loading nanoplatform was developed for HER2⁺ cancer therapy based on the co-assembly of poly (lactic-co-glycolic acid) (PLGA) nanoparticles and engineered modified macrophage membranes. In this nanoplatform, near-infrared (NIR) fluorescent dye ICG or chemotherapeutic drug doxorubicin (DOX) was loaded into the PLGA cores, and an anti-HER2 affibody was stably expressed on the membrane of macrophages. In comparison to the nanoparticles with conventional macrophage membrane coating, the ICG/DOX@AMNP nanoparticles armed with anti-HER2 affibody showed excellent HER2-targeting ability both in vitro and in vivo. Small animal imaging studies confirmed the improved pharmacokinetics of drug delivery and specific distribution of the ICG/DOX@AMNPs in HER2⁺ tumors. Mechanistically, compared with DOX@NPs or DOX@MNPs nanoparticles, DOX@AMNPs exhibited synergistic inhibition of HER2⁺ cancer cells or mice tumor growth by inducing apoptosis and blocking the PI3K/AKT signaling pathway. Altogether, this study proposes a promising biomimetic nanoplatform for the efficient targeted delivery of chemotherapeutic agents to HER2⁺ tumors, demonstrating its great potential for solid tumor therapy.

Elucidating the nanostructure of small interfering RNA-loaded lipidoid-polymer hybrid nanoparticles

We analyzed the structural and material properties of small interfering RNA (siRNA)-loaded lipid-polymer hybrid nanoparticles (LPNs) containing ionizable lipidoid and poly(dl-lactic-co-glycolic acid) (PLGA) using small-angle X-ray scattering, cryogenic transmission electron microscopy, polarized light microscopy, the Langmuir monolayer methodology, differential scanning calorimetry, and attenuated total reflectance Fourier-transform infrared (ATR-FTIR) spectroscopy. Scattering analyses showed that bulk lipidoid self-assemble into lamellar structures with a d-spacing of 38 Å, whereas lipidoid-siRNA lipoplexes display an in-plane lateral organization of siRNA in between lipidoid bilayers with a repeat distance of approximately 55 Å. The siRNA-loaded LPNs adopted a core-shell structure with an interaxial alignment of siRNA between lipidoid shell bilayers. Langmuir monolayer experiments showed a distinct interaction between the lipidoid headgroups and siRNA, which was dependent on buffer subphase pH. Thermal analyses suggested that PLGA and lipidoid interact, which was evident from a shift in the phase transition temperature of lipidoid, and the thermotropic phase behavior of lipidoid was affected by inclusion of siRNA. ATR-FTIR data confirmed the shift or disappearance of characteristic absorption bands of siRNA after lipidoid binding. In conclusion, siRNA-loaded LPNs display a core-shell structure, wherein the polymeric core functions as a colloid matrix support for siRNA-loaded lipidoid shell layers.

Design and optimization of a novel herbosomal-loaded PEG-poloxamer topical formulation for the treatment of cold injuries: a quality-by-design approach

The spectrum of cold injuries ranges from frostnip, chilblains to severe frostbite. Cold injuries occur upon prolonged exposure to freezing temperature and are pathologically a combination of ice crystal formation in the tissue resulting in inflammation, thrombosis and ischemia in the extremities, often necessitating limb amputation in extreme cases due to tissue necrosis. Severe forms of frostbite are a cause of major concern to patients as well as the treating physician. Due to the lack of effective treatment modalities and paucity of research on prophylaxis and therapeutics of cold injuries, we developed a novel herbosomal-loaded PEG-poloxamer topical formulation (n-HPTF) employing quality-by-design (QBD) approach. Natural compounds exhibiting potent therapeutic potential for the management of cold injuries were incorporated in novel lipid vesicles (herbosomes) loaded in PEG-poloxamer polymers. The herbosomal formulation effectively creates an occlusion barrier that promotes epithelial regeneration, desmosome scale-up and angiogenesis and thus promotes rapid healing, indicating controlled release of herbosomes. Optimized novel herbosomes showed entrapment efficiency > 90% and < 300 nm mean particle size and in vitro drug permeation of about 2 µg/cm² followed Higuchi's release kinetics. Skin irritancy study on female Sprague-Dawley rats showed no edema or erythema. In vivo bio-efficacy study revealed significant efficacy (p < 0.05) when compared to the standard treatment groups. Graphical abstract presenting the designing and optimization of novel herbosomal-loaded PEG-poloxamer topical formulation (n-HPTF) and predictive model for the in vivo study of the developed n-HPTF on cold injury rat skin model.

Bridging nanoplatform and vaccine delivery, a landscape of strategy to enhance nasal immunity

Vaccination is an urgently needed and effective option to address epidemic, cancers, allergies, and other diseases. Nasal administration of vaccines offers many benefits over needle-based injection including high compliance and less risk of infection. Inactivated or attenuated vaccines as convention vaccine present potential risks of pathogenic virulence reversal, the focus of nasal vaccine development has shifted to the use of next-generation (subunit and nucleic acid) vaccines. However, subunit and nucleic acid vaccine intranasally have numerous challenges in development and utilization due to mucociliary clearance, mucosal epithelial tight junction, and enzyme/pH degradation. Nanoplatforms as ideal delivery systems, with the ability to enhance the retention, penetration, and uptake of nasal mucosa, shows great potential in improving immunogenic efficacy of nasal vaccine. This review provides an overview of delivery strategies for overcoming nasal barrier, including mucosal adhesion, mucus penetration, targeting of antigen presenting cells (APCs), enhancement of paracellular transportation. We discuss methods of enhancing antigen immunogenicity by nanoplatforms as immune-modulators or multi-antigen co-delivery. Meanwhile, we describe the application status and development prospect of nanoplatforms for nasal vaccine administration. Development of nanoplatforms for vaccine delivery via nasal route will facilitate large-scale and faster global vaccination, helping to address the threat of epidemics.

Orally Dispersible Dosage Forms for Paediatric Use: Current Knowledge and Development of Nanostructure-Based Formulations

The paediatric population has always suffered from a lack of medicines tailored to their needs, especially in terms of accurate dosage, stability and acceptability. Orodispersible dosage forms have gone through a resurrection as an alternative to liquid formulations or fractioned solid formulations, although they are still subject to several inconveniences, among which the unpleasant taste and the low oral bioavailability of the API are the most significant hurdles in the way of achieving an optimal drug product. Nanostructures can address these inconveniences through their size and variety, owing to the plethora of materials that can be used in their manufacturing. Through the formation and functionalisation of nanostructures, followed by their inclusion in orodispersible dosage forms, safe, stable and acceptable medicines intended for paediatric use can be developed.

CFP10-loaded PLGA nanoparticles as a booster vaccine confer protective immunity against Mycobacterium bovis

Introduction: The limited efficacy of BCG (bacillus Calmette-Guérin) urgently requires new effective vaccination approaches for the control of tuberculosis. Poly lactic-co-glycolic acid (PLGA) is a prevalent drug delivery system. However, the effect of PLGA-based nanoparticles (NPs) against tuberculosis for the induction of mucosal immune response is no fully elucidated. In this study, we hypothesized that intranasal immunization with culture filtrate protein-10 (CFP10)-loaded PLGA NPs (CFP10-NPs) could boost the protective immunity of BCG against Mycobacterium bovis in mice. Methods: The recombinant protein CFP10 was encapsulated with PLGA NPs to prepare CFP10-NPs by the classical water-oil-water solvent-evaporation method. Then, the immunoregulatory effects of CFP10-NPs on macrophages in vitro and on BCG-immunized mice in vivo were investigated. Results: We used spherical CFP10-NPs with a negatively charged surface (zeta-potential -28.5 ± 1.7 mV) having a particle size of 281.7 ± 28.5 nm in diameter. Notably, CFP10-NPs significantly enhanced the secretion of tumor necrosis factor α (TNF-α) and interleukin (IL)-1β in J774A.1 macrophages. Moreover, mucosal immunization with CFP10-NPs significantly increased TNF-α and IL-1β production in serum, and immunoglobulin A (IgA) secretion in bronchoalveolar lavage fluid (BALF), and promoted the secretion of CFP10-specific interferon-γ (IFN-γ) in splenocytes of mice. Furthermore, CFP10-NPs immunization significantly reduced the inflammatory area and bacterial load in lung tissues at 3-week post-M. bovis challenge. Conclusion: CFP10-NPs markedly improve the immunogenicity and protective efficacy of BCG. Our findings explore the potential of the airway mucosal vaccine based on PLGA NPs as a vehicle for targeted lung delivery.

Aqueous Heat Method for the Preparation of Hybrid Lipid–Polymer Structures: From Preformulation Studies to Protein Delivery

Liposomes with adjuvant properties are utilized to carry biomolecules, such as proteins, that are often sensitive to the stressful conditions of liposomal preparation processes. The aim of the present study is to use the aqueous heat method for the preparation of polymer-grafted hybrid liposomes without any additional technique for size reduction. Towards this scope, liposomes were prepared through the combination of two different lipids with adjuvant properties, namely dimethyldioctadecylammonium (DDA) and D-(+)-trehalose 6,6′-dibehenate (TDB) and the amphiphilic block copolymer poly(2-(dimethylamino)ethyl methacrylate)-b-poly(lauryl methacrylate) (PLMA-b-PDMAEMA). For comparison purposes, PAMAM dendrimer generation 4 (PAMAM G4) was also used. Preformulation studies were carried out by differential scanning calorimetry (DSC). The physicochemical characteristics of the prepared hybrid liposomes were evaluated by light scattering and their morphology was evaluated by cryo-TEM. Subsequently, in vitro nanotoxicity studies were performed. Protein-loading studies with bovine serum albumin were carried out to evaluate their encapsulation efficiency. According to the results, PDMAEMA-b-PLMA was successfully incorporated in the lipid bilayer, providing improved physicochemical and morphological characteristics and the ability to carry higher cargos of protein, compared to pure DDA:TDB liposomes, without affecting the biocompatibility profile. In conclusion, the aqueous heat method can be applied in polymer-grafted hybrid liposomes for protein delivery without further size-reduction processes.

Intranasal delivery of inactivated PRRSV loaded cationic nanoparticles coupled with enterotoxin subunit B induces PRRSV-specific immune responses in pigs

This study was conducted to evaluate the induction of systemic and mucosal immune responses and protective efficacy following the intranasal administration of inactivated porcine reproductive and respiratory syndrome virus (PRRSV) loaded in polylactic acid (PLA) nanoparticles coupled with heat-labile enterotoxin subunit B (LTB) and dimethyldioctadecylammonium bromide (DDA). Here, 42- to 3-week-old PRRSV-free pigs were randomly allocated into 7 groups of 6 pigs each. Two groups represented the negative (nonvaccinated pigs/nonchallenged pigs, NoVacNoChal) and challenge (nonvaccinated/challenged, NoVacChal) controls. The pigs in the other 5 groups, namely, PLA nanoparticles/challenged (blank NPs), LTB-DDA coupled with PLA nanoparticles/challenged (adjuvant-blank NPs), PLA nanoparticles-encapsulating inactivated PRRSV/challenged (KNPs), LTB-DDA coupled with PLA nanoparticles loaded with inactivated PRRSV/challenged pigs (adjuvant-KNPs) and inactivated PRRSV/challenged pigs (inactivated PRRSV), were intranasally vaccinated with previously described vaccines at 0, 7 and 14 days post-vaccination (DPV). Serum and nasal swab samples were collected weekly and assayed by ELISA to detect the presence of IgG and IgA, respectively. Viral neutralizing titer (VNT) in sera, IFN-γ-producing cells and IL-10 secretion in stimulated peripheral blood mononuclear cells (PBMCs) were also measured. The pigs were intranasally challenged with PRRSV-2 at 28 DPV and necropsied at 35 DPV, and then macro- and microscopic lung lesions were evaluated. The results demonstrated that following vaccination, adjuvant-KNP-vaccinated pigs had significantly higher levels of IFN-γ-producing cells, VNT and IgG in sera, and IgA in nasal swab samples and significantly lower IL-10 levels than the other vaccinated groups. Following challenge, the adjuvant-KNP-vaccinated pigs had significantly lower PRRSV RNA and macro- and microscopic lung lesions than the other vaccinated groups. In conclusion, the results of the study demonstrated that adjuvant-KNPs are effective in eliciting immune responses against PRRSV and protecting against PRRSV infections over KNPs and inactivated PRRSV and can be used as an adjuvant for intranasal PRRSV vaccines.

Hybrid Nanobeads for Oral Indomethacin Delivery

The oral administration of the anti-inflammatory indomethacin (INDO) causes severe gastrointestinal side effects, which are intensified in chronic inflammatory conditions when a continuous treatment is mandatory. The development of hybrid delivery systems associates the benefits of different (nano) carriers in a single system, designed to improve the efficacy and/or minimize the toxicity of drugs. This work describes the preparation of hybrid nanobeads composed of nanostructured lipid carriers (NLC) loading INDO (2%; w/v) and chitosan, coated by xanthan. NLC formulations were monitored in a long-term stability study (25 °C). After one year, they showed suitable physicochemical properties (size < 250 nm, polydispersity < 0.2, zeta potential of −30 mV and spherical morphology) and an INDO encapsulation efficiency of 99%. The hybrid (lipid-biopolymers) nanobeads exhibited excellent compatibility between the biomaterials, as revealed by structural and thermodynamic properties, monodisperse size distribution, desirable in vitro water uptake and prolonged in vitro INDO release (26 h). The in vivo safety of hybrid nanobeads was confirmed by the chicken embryo (CE) toxicity test, considering the embryos viability, weights of CE and annexes and changes in the biochemical markers. The results point out a safe gastro-resistant pharmaceutical form for further efficacy assays.

Optimized ultrasound-assisted extraction of phenolic compounds from Thymus comosus Heuff. ex Griseb. et Schenk (wild thyme) and their bioactive potential

An optimized ultrasound-assisted extractive method was developed to obtain a polyphenol-enriched extract from the aerial parts of Thymus comosus Heuff. ex Griseb. et Schenk. Optimization process was conducted based on Design of Experiment (DoE) principles, determining the influence of three independent variables (time, ultrasound amplitude, ethanol concentration) on the total phenolic content of the extract (dependent variable). Additionally, the phenolic composition of the extract was characterized through UHPLC-HRMS, revealing beside the most abundant flavonoid-type compounds the presence of salvianolic acids C, D and L in high amounts. Phytochemical profile of the extract was correlated with its antioxidant activity (tested through five complementary assays) and enzyme-inhibitory potential, showing important antiglucosidase and anticholinesterase effects. Overall, it was concluded that the developed method is suitable for obtaining a good recovery of both phenolic and non-phenolic compounds from Thymus comosus aerial parts, and their presence in the optimized extract is responsible for its pharmacological potential.

A Survey of Preclinical Studies Evaluating Nanoparticle-Based Vaccines Against Non-Viral Sexually Transmitted Infections

A worldwide estimate of over one million STIs are acquired daily and there is a desperate need for effective preventive as well as therapeutic measures to curtail this global health burden. Vaccines have been the most effective means for the control and potential eradication of infectious diseases; however, the development of vaccines against STIs has been a daunting task requiring extensive research for the development of safe and efficacious formulations. Nanoparticle-based vaccines represent a promising platform as they offer benefits such as targeted antigen presentation and delivery, co-localized antigen-adjuvant combinations for enhanced immunogenicity, and can be designed to be biologically inert. Here we discuss promising types of nanoparticles along with outcomes from nanoparticle-based vaccine preclinical studies against non-viral STIs including chlamydia, syphilis, gonorrhea, and recommendations for future nanoparticle-based vaccines against STIs.

Technological challenges in the preclinical development of an HIV nanovaccine candidate

Despite a very active research in the field of nanomedicine, only a few nano-based drug delivery systems have reached the market. The "death valley" between research and commercialization has been partially attributed to the limited characterization and reproducibility of the nanoformulations. Our group has previously reported the potential of a peptide-based nanovaccine candidate for the prevention of SIV infection in macaques. This vaccine candidate is composed of chitosan/dextran sulfate nanoparticles containing twelve SIV peptide antigens. The aim of this work was to rigorously characterize one of these nanoformulations containing a specific peptide, following a quality-by-design approach. The evaluation of the different quality attributes was performed by several complementary techniques, such as dynamic light scattering, nanoparticle tracking analysis, and electron microscopy for particle size characterization. The inter-batch reproducibility was validated by three independent laboratories. Finally, the long-term stability and scalability of the manufacturing technique were assessed. Overall, these data, together with the in vivo efficacy results obtained in macaques, underline the promise this new vaccine holds with regard to its translation to clinical trials. Graphical abstract.

Surfactant Assisted Rapid-Release Liposomal Strategies Enhance the Antitumor Efficiency of Bufalin Derivative and Reduce Cardiotoxicity

Background

BF211, a derivative of bufalin (BF), shows significantly improved solubility and potent antitumor efficiency compared to BF. Unfortunately, the unwanted toxicity such as cardiotoxicity caused by unspecific distribution has hindered its clinical use.

Methods

PEGylated BF211 liposomes (BF211@Lipo) were designed and optimizely prepared based on the pre-prescription research. In vitro and in vivo cardiotoxicity was evaluated. In vivo pharmacokinetics and biodistribution of BF211@Lipo were investigated. In vivo antitumor activity and toxicity were evaluated in HepG2 cell xenograft models. The rapid-release triggered by Poloxamer 188 (P188) was assessed in vitro and in vivo.

Results

The optimized BF211@Lipo displayed a spherical morphology with a size of (164.6 ± 10.3) nm and a high encapsulation efficiency of (93.24 ± 2.15) %. The in vivo concentration–time curves of BF211 loaded in liposomes showed a prolonged half-life in plasma and increased tumor accumulation. No obvious abnormality in electrocardiograms was observed in guinea pigs even at 9 mg/kg. Moreover, to improve the efficient release of BF211@Lipo, a surfactant-assisted rapid-release strategy was developed, and the release-promoting mechanism was revealed by the fluorescence resonance energy transfer (FRET) and fluorescence nanoparticle tracking analysis (fl-NTA) technology. Sequential injection of BF211@Lipo and P188 could ignite the “cold” liposomes locally in tumor regions, facilitating the burst release of BF211 and enhancing the therapeutic index.

Conclusion

Our progressive efforts that begin with preparation technology and dosage regimen enable BF211 to like a drug, providing a promising nano platform to deliver the cardiac glycosides and alleviate the side effects by decreasing unspecific biodistribution.

Enhanced oral bioavailability and gastroprotective effect of ibuprofen through mixed polymer-lipid nanoparticles

Objectives: The aim of this study was to design and formulate mixed polymer-lipid nanoparticles (PLNs) for the delivery of ibuprofen. Methods: The mixed PLNs were prepared by a single modified emulsification solvent evaporation method. Key findings: Core-shell-shaped mixed PLNs were successfully prepared, with sizes in the nano range (193.3 ± 0.70 to 795.8 ± 0.70 nm) and ζ potential (-26.8 ± 0.45 to -42.8 ± 0.30 mV). Entrapment efficiency ranged from 80.3 to 93.6%. Conclusions: Pharmacokinetic parameters showed great improvement in C_max and T_max of ibuprofen from the formulation PLNs8 compared with the respective Brufen^® and pure drugs, indicating improvement in bioavailability of the drug.

Co-administration of zinc phthalocyanine and quercetin via hybrid nanoparticles for augmented photodynamic therapy

The photodynamic anticancer activity of a photosensitizer can be further increased by co-administration of a flavonoid. However, this requires that both molecules must be effectively accumulated at the tumor site. Hence, in order to enhance the activity of zinc phthalocyanine (ZnPc, photosensitizer), it was co-encapsulated with quercetin (QC, flavonoid) in lipid polymer hybrid nanoparticles (LPNs) developed using biodegradable & biocompatible materials and prepared using a single-step nanoprecipitation technique. High stability and cellular uptake, sustained release, inherent fluorescence, of ZnPC were observed after encapsulation in the LPNs, which also showed a higher cytotoxic effect in breast carcinoma cells (MCF-7) compared to photodynamic therapy (PDT) alone. In vivo studies in tumor-bearing Sprague Dawley rats demonstrated that the LPNs were able to deliver ZnPc and QC to the tumor site with minimal systemic toxicity and increased antitumor effect. Overall, the photodynamic effect of ZnPc was synergized by QC. This strategy could be highly beneficial for cancer management in the future while nullifying the side effects of chemotherapy.

Cationic Nanostructures for Vaccines Design

Subunit vaccines rely on adjuvants carrying one or a few molecular antigens from the pathogen in order to guarantee an improved immune response. However, to be effective, the vaccine formulation usually consists of several components: an antigen carrier, the antigen, a stimulator of cellular immunity such as a Toll-like Receptors (TLRs) ligand, and a stimulator of humoral response such as an inflammasome activator. Most antigens are negatively charged and combine well with oppositely charged adjuvants. This explains the paramount importance of studying a variety of cationic supramolecular assemblies aiming at the optimal activity in vivo associated with adjuvant simplicity, positive charge, nanometric size, and colloidal stability. In this review, we discuss the use of several antigen/adjuvant cationic combinations. The discussion involves antigen assembled to 1) cationic lipids, 2) cationic polymers, 3) cationic lipid/polymer nanostructures, and 4) cationic polymer/biocompatible polymer nanostructures. Some of these cationic assemblies revealed good yet poorly explored perspectives as general adjuvants for vaccine design.

Cationic Polylactic Acid-Based Nanoparticles Improve BSA-FITC Transport Across M Cells and Engulfment by Porcine Alveolar Macrophages

This work described the development of a cationic polylactic acid (PLA)-based nanoparticles (NPs) as an antigen delivery system using dimethyldioctadecylammonium bromide (DDA) to facilitate the engulfment of BSA-FITC by porcine alveolar macrophages (3D4/2 cells) and heat-labile enterotoxin subunit B (LTB) to enhance the transport of BSA-FITC across M cells. The experimental design methodology was employed to study the influence of PLA, polyvinyl alcohol (PVA), DDA, and LTB on the physical properties of the PLA-based NPs. The size of selected cationic PLA NPs comprising 5% PLA, 5% PVA, and 0.6% DDA with or without LTB absorption was range from 367 to 390 nm with a polydispersity index of 0.26, a zeta potential of + 26.00 to + 30.55 mV, and entrapment efficiency of 41.43%. Electron micrographs revealed NPs with spherical shape. The release kinetic of BSA from the NPs followed the Korsmeyer-Peppas kinetics. The cationic PLA NPs with LTB surface absorption showed 3-fold increase in BSA-FITC transported across M cells compared with the NPs without LTB absorption. The uptake studies demonstrated 2-fold increase in BSA-FITC intensity in 3D4/2 cells with cationic NPs as compared with anionic NPs. Overall, the results suggested that LTB decreased the retention time of BSA-FITC loaded in the cationic PLA NPs within the M cells, thus promoting the transport of BSA-FITC across the M cells, and cationic NPs composed of DDA help facilitate the uptake of BSA-FITC in the 3D4/2 cells. Further studies in pigs with respiratory antigens will provide information on the efficacy of cationic PLA NPs as a nasal antigen carrier system.

O/W Nanoemulsion as an Adjuvant for an Inactivated H3N2 Influenza Vaccine: Based on Particle Properties and Mode of Carrying

Background and Purpose

Adjuvant can reduce vaccine dosage and acquire better immune protection to the body, which helps to deal with the frequent outbreaks of influenza. Nanoemulsion adjuvants have been proved efficient, but the relationship between their key properties and the controlled release which greatly affects immune response is still unclear. The present work explores the role of factors such as particle size, the polydispersity index (PDI), stability and the safety of nanoemulsions by optimizing the water concentration, oil phase and modes of carrying, to explain the impact of those key factors above on adjuvant effect.

Methods

Isopropyl myristate (IPM), white oil, soybean oil, and grape-kernel oil were chosen as the oil phase to explore their roles in emulsion characteristics and the adjuvant effect. ICR mice were immunized with an emulsion-inactivated H3N2 split influenza vaccine mixture, to compare the nanoemulsion’s adjuvant with traditional aluminium hydroxide or complete Freund’s adjuvant.

Results

Particle size of all the nanoemulsion formed in our experiment ranged from 20 nm to 200 nm and did not change much when diluted with water, while the PDI decreased obviously, indicating that the particles tended to become more dispersive. Formulas with 80% or 85.6% water concentration showed significant higher HAI titer than aluminium hydroxide or complete Freund’s adjuvant, and adsorption rather than capsule mode showed higher antigen delivery efficiency. As mentioned about oil phase, G (IPM), F (white oil), H (soybean oil), and I (grape-kernel oil) showed a decreasing trend in their adjuvant efficiency, and nanoemulsion G was the best adjuvant with smaller and uniform particle size.

Conclusion

Emulsions with a smaller, uniform particle size had a better adjuvant effect, and the adsorption mode was generally more efficient than the capsule mode. The potential adjuvant order of the different oils was as follows: IPM > white oil > soybean oil > grape-kernel oil.

The incorporation of cationic property and immunopotentiator in poly (lactic acid) microparticles promoted the immune response against chronic hepatitis B

Biodegradable microparticles (MPs) as vaccine adjuvants have sparked the passion of researchers in recent decades. However, it is still a huge challenge to develop an efficient vaccine delivery system to reverse chronic hepatitis B (CHB). Herein, we integrated a physiochemical merit and an immunopotentiator property in poly (lactic acid) (PLA) MPs and verified the therapeutic effect on CHB model mice. We prepared uniform MPs with insertion of cationic lipid didodecyldimethylammonium bromide (DDAB), which endowed a physiochemical merit for MPs. Such a DDAB-PLA (DP) group raised the recruitment of immune cells to the injection site along with the secretion of chemokines and pro-inflammatory cytokines, promoting the activation of antigen-presenting cells (APCs). Further combination of stimulator of interferon genes (STING) agonist 5,6-dimethylxanthenone-4-acetic acid (DMXAA) (DP-D) elevated 5.8-fold higher interferon regulatory factor 7 (IRF-7) expression compared to that for DP group. The DP group showed preferred lysosome escape advantage, which was in line with the DMXAA release behavior and the intracellular target of DMXAA. In addition, DP-D vaccine augmented the IFN-γ secreting splenocytes and motivated Th1-biased antibodies in a more efficient way than that for the DP group. In the CHB model, the MPs based vaccines achieved 50% HBsAg seroconversion rate, and HBcAg in the liver also got a reduction. DP-D produced higher amount of memory T/B cells to confer protection in a sustained manner. Present work thus provided a promising strategy, via integrating a fine-tuned physiochemical property and an immunopotentiator virtue in the MPs, which synergistically reinforced both humoral and cellular immune responses against CHB.

Pursuing for the better lung cancer therapy effect: Comparison of two different kinds of hyaluronic acid and nitroimidazole co-decorated nanomedicines

Lung cancer remains the leading cause of cancer associated deaths worldwide. Compared with traditional chemotherapy for non-small cell lung cancer (NSCLC), specific targeted therapies are better choices for advanced patients to improve their survival. In this study, we attempted to fabricate Nitroimidazoles (NI) and Hyaluronic acid (HA) co-decorated, cisplatin (DDP) loaded polymeric nanoparticles (PNPs) (NI/HA-DDP-PNPs) and lipid-polymer hybrid nanoparticles (LPNs) (NI/HA-DDP-LPNs) for the facilitated drug delivery at lung tumor regions (hypoxic regions). In vitro cytotoxicity and cellular uptake; In vivo anti-tumor activity and in vivo tissue biodistribution of PNPs and LPNs were evaluated and compared in lung carcinoma cells and xenograft. Hydrodynamic size of NI/HA-DDP-LPNs was 185.6 ± 4.7 nm, which is larger than that of NI/HA-DDP-PNPs (136.7 ± 3.5 nm). The zeta potential of NI/HA-DDP-PNPs (-31.2 ± 2.7 mV) was more negative than NI/HA-DDP-LPNs (-22.3 ± 2.1 mV). The peak plasma concentration (C_max) achieved from NI/HA-DDP-PNPs and NI/HA-DDP-LPNs was 35.2 ± 1.6 and 37.3 ± 1.7 μg/mL. The half-life (T_1/2) of NI/HA-DDP-PNPs and NI/HA-DDP-LPNs was 12.03 ± 0.75 and 11.78 ± 0.89 h. Area Under Curve (AUC) of NI/HA-DDP-PNPs and NI/HA-DDP-LPNs showed no significant difference while greater than other groups. NI/HA-DDP-LPNs exhibited excellent antitumor effect against drug-resistant human lung cancer A549/DDP cells in vitro and in vivo, better than that of NI/HA-DDP-PNPs. Considering that the low toxicity of NI/HA-DDP-LPNs and NI/HA-DDP-PNPs, NI/HA-DDP-LPNs could be a more promising system for lung cancer targeted therapy.

Nanoparticles for mucosal vaccine delivery

Mucosal surfaces represent important routes of entry into the human body for the majority of pathogens, and they constitute unique sites for targeted vaccine delivery. Nanoparticle-based drug delivery systems are emerging technologies for delivering and improving the efficacy of mucosal vaccines. Recent studies have provided new insights into formulation and delivery aspects of importance for the design of safe and efficacious mucosal subunit vaccines based on nanoparticles. These include novel nanomaterials, their physicochemical properties and formulation approaches, nanoparticle interaction with immune cells in the mucosa, and mucosal immunization and delivery strategies. Here, we present recent progress in the application of nanoparticle-based approaches for mucosal vaccine delivery and discuss future research challenges and opportunities in the field.

Microfluidic Synthesis of Gd-Based Nanoparticles for Fast and Ultralong MRI Signals in the Solid Tumor

Clinically used magnetic resonance imaging contrast agents (MRI CAs) for solid tumors suffer from short life spans and low accumulation at the tumor for their low molecular weights. A good solution is to incorporate these MRI CAs into nanoparticles. Food and Drug Administration-approved compounds, poly(lactic-co-glycolic acid) (PLGA) and lipids, are chosen to assemble these nanoparticles. PLGA/lipid hybrid nanoparticles are assembled in microfluidic channels with a suitable size distribution for imaging tumors. These nanoparticles achieve clearly enhanced MRI contrast at the tumor at 0.5 h postinjection. The enhanced MRI contrast is sustained for 16 h. They can margin the tumor with as good an enhanced MRI contrast as clinical MRI CAs (which visualize the whole tumor) of the solid tumor with much less Gd. They are particularly useful for monitoring the solid tumor after therapy within a day and without repeated administration as clinical MRI CAs.

Targeted Codelivery of an Antigen and Dual Agonists by Hybrid Nanoparticles for Enhanced Cancer Immunotherapy

Among approaches of current cancer immunotherapy, a dendritic cell (DC)-targeted vaccine based on nanotechnology could be a promising way to efficiently induce potent immune responses. To enhance DC targeting and vaccine efficiency, we included imiquimod (IMQ), a toll-like receptor 7/8 (TLR 7/8) agonist, and monophosphoryl lipid A (MPLA), a TLR4 agonist, to synthesize lipid-polymer hybrid nanoparticles using PCL-PEG-PCL and DOTAP (IMNPs) as well as DSPE-PEG-mannose (MAN-IMNPS). The spatiotemporal delivery of MPLA (within the outer lipid layer) to extracellular TLR4 and IMQ (in the hydrophobic core of NPs) to intracellular TLR7/8 can activate DCs synergistically to improve vaccine efficacy. Ovalbumin (OVA) as a model antigen was readily absorbed by positively charged DOTAP and showed a quick release in vitro. Our results demonstrated that this novel nanovaccine enhanced cellular uptake, cytokine production, and maturation of DCs. Compared with the quick metabolism of free OVA-agonists, the depot effect of OVA-IMNPs was observed, whereas MAN-OVA-IMNPs promoted trafficking to secondary lymphoid organs. After immunization with a subcutaneous injection, the nanovaccine, especially MAN-OVA-IMNPs, induced more antigen-specific CD8⁺ T cells, greater lymphocyte activation, stronger cross-presentation, and more generation of memory T cells, antibody, IFN-γ, and granzyme B. Prophylactic vaccination of MAN-OVA-IMNPs significantly delayed tumor development and prolonged the survival in mice. The therapeutic tumor challenge indicated that MAN-OVA-IMNPs prohibited tumor progression more efficiently than other formulations, and the combination with an immune checkpoint blockade further enhanced antitumor effects. Hence, the DC-targeted vaccine codelivery with IMQ and MPLA adjuvants by hybrid cationic nanoparticles in a spatiotemporal manner is a promising multifunctional antigen delivery system in cancer immunotherapy.

Up-to-date vaccine delivery systems: robust immunity elicited by multifarious nanomaterials upon administration through diverse routes

In this review, we summarize the recent design strategies (2015-present) of nanomaterial-based vaccine delivery systems via multiple routes to induce robust protective immunity. The selected topics are focused on the novel design strategies of nanomaterial carriers for vaccine delivery. Inspired by recent advances, we also briefly introduce the emerging administration routes that may give rise to synergistic immune effects with advanced delivery systems. Ultimately, we present the existing challenges and survey the prospective development of various nanoparticle vaccine delivery systems.

Development of sorafenib loaded nanoparticles to improve oral bioavailability using a quality by design approach

Sorafenib, a potent anticancer drug, has low absorption in the gastrointestinal tract due to its poor aqueous solubility. The main purpose of this investigation was to design sorafenib nanoparticle using a newly developed technique, nanoparticulation using fat and supercritical fluid (NUFS™) to improve the absorption of sorafenib. The quality by design (QbD) tool was adopted to define the optimal formulation variables: hydroxypropyl methyl cellulose (HPMC), polyvinyl pyrrolidone K30 (PVP), and poloxamer. The studied response variables were particle size of nanoparticle, dissolution (5, 60, and 180 min), drug concentration time profile of nanoparticle formulations, and maximum drug concentration. The result of particle size revealed that an increase in concentration of poloxamer and HPMC decreased the particle size of nanoparticles (p < 0.05). Likewise, the concentration of drug release at different time point (5, 60, and 180 min) showed HPMC and poloxamer had positive effects on drug dissolution while PVP had negative effects on it. The design space was built in accordance with the particle size of nanoparticle (target < 500 nm) and dissolution of sorafenib (target > 7 µm/mL), following failure probability analysis using Monte Carlo simulations. In vivo pharmacokinetics studies in beagle dogs demonstrated that optimized formulation of sorafenib (F3 and F4 tablets) exhibited higher blood drug profiles indicating better absorption compared to the reference tablet (Nexavar^®). In conclusion, this study showed the importance of systematic formulation design for understanding the effect of formulation variables on the characteristics of nanoparticles of the poorly soluble drug.

Preparation, Characterization, and Pharmacokinetic Evaluation of Imperatorin Lipid Microspheres and Their Effect on the Proliferation of MDA-MB-231 Cells

Imperatorin is a chemical compound belonging to the linear furanocoumarins. Imperatorin is attracting considerable attention because of its antitumor, antibacterial, anti-inflammatory, and anticoagulant activities, inhibition of myocardial hypertrophy, and other pharmacological efficacies. However, imperatorin has limited water solubility and has better lipid solubility; thus, we decided to design and synthesize imperatorin lipid microspheres to optimize the preparation conditions. The aim was to develop and formulate imperatorin lipid microspheres through nanoemulsion technology and apply the response surface⁻central composite design to optimize the imperatorin lipid microsphere formulation. The influence of the amounts of egg lecithin, poloxamer 188, and soybean oil for injection on the total percentage of the oil phase was investigated. The integrated effect of dependent variables, including particle size, polydispersity index, zeta potentials, drug loading, and encapsulation efficiency, was investigated. Data of overall desirabilities were fitted to a second-order polynomial equation, through which three-dimensional response surface graphs were described. Optimum experimental conditions were calculated by Design-Expert 8.06. Results indicated that the optimum preparation conditions were as follows: 1.39 g of egg lecithin, 0.21 g of poloxamer 188, and 10.57% soybean oil for injection. Preparation of imperatorin lipid microspheres according to the optimum experimental conditions resulted in an overall desirability of 0.7286, with the particle size of 168 ± 0.54 nm, polydispersity index (PDI) of 0.138 ± 0.02, zeta potentials of -43.5 ± 0.5 mV, drug loading of 0.833 ± 0.27 mg·mL^-1, and encapsulation efficiency of 90 ± 1.27%. The difference between the observed and predicted values of the overall desirability of the optimum formulation was in the range from 2.4% to 4.3%. Subsequently, scanning electron microscopy was used to observe the micromorphology of the imperatorin lipid microspheres, showing round globules of relatively uniform shape and sizes within 200 nm. The effect of imperatorin lipid microspheres on MDA-MB-231 proliferation was investigated by the MTT method. Furthermore, pharmacokinetics in Sprague-Dawley rats was evaluated using orbital bleeding. A sensitive and reliable liquid chromatography with the high-performance liquid chromatography (HPLC) method was established and validated for the quantification of imperatorin in rat plasma samples. The data were calculated by DAS (drug and statistics) Pharmacokinetic Software version 3.3.0 (Version 3.3.0, Shanghai, China). Results demonstrated that imperatorin lipid microspheres can significantly enhance the bioavailability of imperatorin and can significantly inhibit MDA-MB-231 cell proliferation. In conclusion, our results suggested that the response surface⁻central composite design is suitable for achieving an optimized lipid microsphere formulation. Imperatorin lipid microspheres can improve the bioavailability of imperatorin and better inhibit the proliferation of MDA-MB-231 cells as compared to imperatorin alone.

Mycobacterium Tuberculosis and Interactions with the Host Immune System: Opportunities for Nanoparticle Based Immunotherapeutics and Vaccines

Tuberculosis (TB) caused by Mycobacterium tuberculosis remains a deadly infectious disease. The thin pipeline of new drugs for TB, the ineffectiveness in adults of the only vaccine available, i.e. the Bacillus Calmette-Guerin vaccine, and increasing global antimicrobial resistance, has reinvigorated interest in immunotherapies. Nanoparticles (NPs) potentiate the effect of immune modulating compounds (IMC), enabling cell targeting, improved transfection of antigens, enhanced compound stability and provide opportunities for synergistic action, via delivery of multiple IMCs. In this review we describe work performed in the application of NPs towards achieving immune modulation for TB treatment and vaccination. Firstly, we present a comprehensive review of M. tuberculosis and how the bacterium modulates the host immune system. We find that current work suggest great promise of NP based immunotherapeutics as novel treatments and vaccination systems. There is need to intensify research efforts in this field, and rationally design novel NP immunotherapeutics based on current knowledge of the mycobacteriology and immune escape mechanisms employed by M. tuberculosis.

Angelica sinensis polysaccharide encapsulated into PLGA nanoparticles as a vaccine delivery and adjuvant system for ovalbumin to promote immune responses

Nanoparticles (NPs)-based vaccine delivery systems are widely used for their ability to control the release of antigens and promote immune responses against cancer or infectious diseases. In this study, the immunopotentiator Angelica sinensis polysaccharide (ASP) and model protein antigen ovalbumin (OVA) were encapsulated into Poly(lactic-co-glycolic acid) (PLGA) to formulate the novel NPs-based vaccine delivery system (ASP-PLGA/OVA). These formulations were subcutaneously administered to mice, then the magnitude and kinetics of antibody and cellular immune responses were assessed. The ASP-PLGA/OVA NPs were pherical in shape with smooth surfaces, approximately 225.2 nm in average size, negatively charged (around -11.27 mV), and the encapsulation efficiency of OVA at around 66.28%, respectively. Furthermore, ASP-PLGA/OVA NPs could keep stable at 4 °C over 30 days and provide a sustained and controlled release of OVA from the NPs. The results demonstrated that mice immunized with ASP-PLGA/OVA NPs could significantly enhance lymphocyte proliferation and improve the ratio of CD4⁺ to CD8⁺ T cells, thereby ASP-PLGA/OVA NPs could induce a strong cellular immune response. Moreover, the ASP-PLGA/OVA NPs could induce vigorous and long-term IgG immune responses with a mixed Th1 and Th2 responses and up-regulate the levels of Th-associated cytokines. These results suggested that ASP-PLGA/OVA NPs, which stimulated strong and continuous antibody responses and induced cellular immune responses, could potentially serve as an efficient and safe vaccine delivery and adjuvant system against infections and diseases.

A practical framework for implementing Quality by Design to the development of topical drug products: Nanosystem-based dosage forms

Skin has been increasingly recognized as an important drug administration route with topical formulations, offering a targeted approach for the treatment of several dermatological disorders. The effectiveness of this route is hampered by its natural barrier, the stratum corneum (SC), and hence, different strategies have been investigated to improve percutaneous drug transport. The design of nanodelivery systems, aiming at solving skin delivery issues, have been largely explored, due to their potential to revolutionize dermal therapies, improving therapeutic effectiveness and reducing side effects. Apart from nanosystem benefits, the fulfilment of the reproducibility requirements and quality standards still limit their industrial production. The optimization of nanosystem formulation and manufacturing process is complex, usually involving a large number of variables. Therefore, a science- and risk-oriented approach, such as Quality by Design (QbD) will provide a comprehensive and noteworthy knowledge, yielding high quality drug products without extensive regulatory burden. This review aims to set up the basis for QbD development approach, encompassing preliminary and systematic risk assessments, with critical process parameters (CPPs) and critical material attributes (CMAs) identification, of different nanosystems potentially used in dermal therapies.

Properties and applications of nanoparticle/microparticle conveyors with adjuvant characteristics suitable for oral vaccination

Vaccination is one of the most effective approaches in the prevention and control of disease worldwide. Oral vaccination could have wide applications if effective protection cannot be achieved through traditional (eg, parenteral) routes of vaccination. However, oral administration is hampered by the difficulties in transferring vaccines in vivo. This has led to the development of materials such as carriers with potential adjuvant effects. Considering the requirements for selecting adjuvants for oral vaccines as well as the advantages of nanoparticle/microparticle materials as immune effectors and antigen conveyors, synthetic materials could improve the efficiency of oral vaccination. In this review, nanoparticles and microparticles with adjuvant characteristics are described with regard to their potential importance for oral immunization, and some promising and successful modification strategies are summarized.

Development of New Preventive and Therapeutic Vaccines for Tuberculosis

Tuberculosis (TB) is a contagious disease that has been responsible for the death of one billion people in the last 200 years. Until now, the only vaccine approved for the prevention of TB is Bacillus Calmette-Guérin (BCG), which is prepared by attenuating Mycobacterium bovis. However, one of the limitations of BCG is that its preventive effect against pulmonary TB varies from person to person. Therefore, there arises a need for a new TB vaccine to replace or supplement BCG. In this review, we have summarized the findings of current clinical trials on preventive and therapeutic TB vaccine candidates. In addition, we have discussed a novel vaccination approach using the cell-based vaccine presenting early secretory antigenic target-6 (ESAT-6), which is a potent immunogenic antigen. The role of ESAT-6 in hosts has also been described.

Unusual Self-Assembly of the Recombinant Chlamydia trachomatis Major Outer Membrane Protein-Based Fusion Antigen CTH522 Into Protein Nanoparticles

Sexually transmitted Chlamydia trachomatis infects more than 100 million people annually, and untreated chlamydia infections can cause severe complications. Therefore, there is an urgent need for a chlamydia vaccine. The Ctrachomatis major outer membrane protein (MOMP) is highly immunogenic but is a challenging vaccine candidate by being an integral membrane protein, and the immunogenicity depends on a correctly folded structure. We investigated the biophysical properties of the recombinant MOMP-based fusion antigen CTH522, which is tested in early human clinical trials. It consists of a truncated and cysteine-free version of MOMP fused to 4 variable domains from serovars D-G. In the native state, CTH522 did not exist as a monomer but showed an unusual self-assembly into nanoparticles with a negative zeta potential. In contrast to the β-barrel structure of MOMP, native CTH522 contained no well-defined secondary structural elements, and no thermal transitions were measurable. Chemical unfolding resulted in monomers that upon removal of the denaturant self-assembled into higher order structures, comparable to the structure of the native protein. The conformation of CTH522 in nanoparticles is thus not entirely random and contains structural elements stabilized via denaturant-disruptable hydrophobic interactions. In conclusion, CTH522 has an unusual quaternary structure of supramolecular self-assemblies.

Nanosystem trends in drug delivery using quality-by-design concept

Quality by design (QbD) has become an inevitable trend because of its benefits for product quality and process understanding. Trials have been conducted using QbD in nanosystems' optimization. This paper reviews the application of QbD for processing nanosystems and summarizes the application procedure. It provides prospective guidelines for future investigations that apply QbD to nanosystem manufacturing processes. Employing the QbD concept in this way is a novel area in nanosystem quality.

Original research paper. Formulation and pharmaceutical development of quetiapine fumarate sustained release matrix tablets using a QbD approach

The main objective of the present study was to apply QbD methodology in the development of once-a-day sustained release quetiapine tablets. The quality target product profile (QTPP) was defined after the pharmaceutical properties and kinetic release of the innovator product, Seroquel XR 200 mg. For the D-optimal experimental design, the level and ratio of matrix forming agents and the type of extragranular diluent were chosen as independent inputs, which represented critical formulation factors. The critical quality attributes (CQAs) studied were the cumulative percentages of quetiapine released after certain time intervals. After the analysis of the experimental design, optimal formulas and the design space were defined. Optimal formulas demonstrated zero-order release kinetics and a dissolution profile similar to the innovator product, with f2 values of 74.53 and 83.74. It was concluded that the QbD approach allowed fast development of sustained release tablets with similar dissolution behavior as the innovator product.