Cellulase production by Aspergillus niger using urban lignocellulosic waste as substrate: Evaluation of different cultivation strategies

Cellulase production by Aspergillus fumigatus A4112 and the potential use of the enzyme in cooperation with surfactant to enhance floating oil recovery and methane production from palm oil mill effluent

This research performed cellulase production by Aspergillus fumigatus A4112 and evaluated its potential use in palm oil mill effluent (POME) hydrolysis to recover oil simultaneously with the generation of fermentable sugar useful for biofuel production under non-sterilized conditions. Empty fruit bunch (EFB) without pretreatment was used as carbon source. The combination of nitrogen sources facilitated CMCase production. The maximum activity (3.27 U/mL) was obtained by 1.0 g/L peptone and 1.5 g/L (NH4)2SO4 and 20 g/L EFB at 40 °C for 7 days. High level of FPase activity (39.51 U/mL) was also obtained. Interestingly, the enzyme retained its cellulase activities more than 60% at ambient temperature over 15 days. In enzymatic hydrolysis, Triton X-100 was an effective surfactant to increase total oil recovery in the floating form. High yield of reducing sugar (50.13 g/L) and 21% (v/v) of floating oil was recoverable at 65 °C for 48 h. Methane content of the raw POME increased from 41.49 to 64.94% by using de-oiled POME hydrolysate which was higher than using the POME hydrolysate (59.82%). The results demonstrate the feasibility of the constructed process for oil recovery coupled with a subsequent step for methane yield enhancement in biogas production process that benefits the palm oil industry.

On-site cellulase production by Trichoderma reesei RutC-30 to enhance the enzymatic saccharification of ball-milled corn stover

Cellulases are essential for the enzymatic saccharification of lignocellulose. They play a crucial role in breaking down the structure of lignocellulose to obtain fermentable sugars. In this study, we conducted on-site cellulase production by Trichoderma reesei RutC-30 through submerged fermentation. The effects of carbon source, nitrogen source, KH2PO4, and mineral elements on cellulase production were evaluated using the hydrolyzed total sugar concentration of ball-milled corn stover as an indicator. The optimal fermentation medium conditions for cellulase production were determined through orthogonal experimental design analysis. Additionally, by optimizing culture conditions, including inoculation, pH, and bottling volume, we achieved a total sugar concentration of 92.25 g/L. After the optimization, the FPA, CMCA, protein, and total sugar concentration increased by 75.49 %, 18.43 %, 89.71 %, and 17.83 %, respectively. Furthermore, corn stover pretreated by different methods was applied to induce cellulase production. Ball-milled and steam-exploded corn stover was identified as suitable incubation carbon sources with total sugar concentration up to 94.31 g/L. Our work exploits the cellulase induced by lignocellulose and then applies it to lignocellulose, enabling the customization and providing a reference for the production of cellulase with corn stover as an inducer.

Synergistic effect of cellulo-xylanolytic and laccase enzyme consortia for improved deinking of waste papers

This study reports the cellulo-xylanolytic cocktail production from Hypocrea lixii GGRK4 using multi-objective genetic algorithm-artificial neural network tool, resulting in 8.32 ± 1.07 IU/mL, 51.53 ± 3.78 IU/mL activity of CMCase and xylanase, respectively with more than 85 % residual activity at 60 °C and pH 6.0. Interestingly, metal ions viz. K+ and Ca2+ stimulated the enzyme activity, whereas Fe2+ and Cu2+ reduced the activity. Significant amounts of hydrophobic compounds, chromophores, and phenolics were released after wastepapers deinking. The deinking efficiency of 73.60 ± 2.45 % and 38.60 ± 1.34 % was obtained for photocopier paper and newspaper, respectively, whereas brightness of 89.90 ± 2.10 % ISO and 44.90 ± 1.63 % ISO was reported for both types of waste papers. The physical strength of deinked photocopier paper and newspapers, i.e., tensile index (3.10 and 0.50 %), tearing index (7.10 and 4.83 %), and burst factor (8.61) were enhanced whereas double fold property was decreased proving wastepaper reusability. This consortium showed effective and significant enzymatic deinking efficiency for recycled wastepapers.

Production, Purification, and Characterization of a Cellulase from Paenibacillus elgii

Cellulases are one of the most essential natural factors for cellulose degradation and, thus, have attracted significant interest for various applications. In this study, a cellulase from Paenibacillus elgii TKU051 was produced, purified, and characterized. The ideal fermentation conditions for cellulase productivity were 2% carboxymethyl cellulose (CMC) as the growth substrate, pH = 8, temperature of 31 °C, and 4 days of culturing. Accordingly, a 45 kDa cellulase (PeCel) was successfully purified in a single step using a High Q column with a recovery yield of 35% and purification of 42.2-fold. PeCel has an optimal activity at pH 6 and a temperature of 60 °C. The activity of cellulase was significantly inhibited by Cu2+ and enhanced by Mn2+. The PeCel-catalyzed products of the CMC hydrolysis were analyzed by high-performance liquid chromatography, which revealed chitobiose and chitotriose as the major products. Finally, the clarity of apple juice was enhanced when treated with PeCel.

Bioprospecting of endophytic fungi from semidesert candelilla (Euphorbia antisyphilitica Zucc): Potential for extracellular enzyme production

Endophytic microbial communities colonize plants growing under various abiotic stress conditions. Candelilla (Euphorbia antisyphilitica Zucc.) is a shrub that develops functionally in arid and semi-arid zones of Mexico; these conditions generate an association between the plant and the microorganisms, contributing to the production of enzymes as a defense mechanism for resistance to abiotic stress. The objective of this research was to isolate and identify endophyte fungi of candelilla and bioprospection of these endophytic fungi for enzyme production using candelilla by-products. Fungi were isolated and identified using ITS1/ITS4 sequencing. Their potency index (PI) was evaluated in producing endoglucanase, xylanase, amylase, and laccase. Fermentation was carried out at 30°C for 8 days at 200 rpm, with measurements every 2 days, using candelilla by-products as substrate. All fungi exhibited higher cellulase, amylase, and laccase activities on the 2nd, 6th, and 8th day of fermentation, respectively, of fermentation. The fungus Aspergillus niger ITD-IN4.1 showed the highest amylase activity (246.84 U/mg), the genus Neurospora showed the highest cellulase activity, reaching up to 13.45 FPU/mg, and the strain Neurospora sp. ITD-IN5.2 showed the highest laccase activity (3.46 U/mg). This work provides the first report on the endophytic diversity of E. antisyphilitica and its potential role in enzyme production.

Lignocellulolytic Enzymes Production by Four Wild Filamentous Fungi for Olive Stones Valorization: Comparing Three Fermentation Regimens

Lignocellulolytic enzymes play a crucial role in efficiently converting lignocellulose into valuable platform molecules in various industries. However, they are limited by their production yields, costs, and stability. Consequently, their production by producers adapted to local environments and the choice of low-cost raw materials can address these limitations. Due to the large amounts of olive stones (OS) generated in Morocco which are still undervalued, Penicillium crustosum, Fusarium nygamai, Trichoderma capillare, and Aspergillus calidoustus, are cultivated under different fermentation techniques using this by-product as a local lignocellulosic substrate. Based on a multilevel factorial design, their potential to produce lignocellulolytic enzymes during 15 days of dark incubation was evaluated. The results revealed that P. crustosum expressed a maximum total cellulase activity of 10.9 IU/ml under sequential fermentation (SF) and 3.6 IU/ml of β-glucosidase activity under submerged fermentation (SmF). F. nygamai recorded the best laccase activity of 9 IU/ml under solid-state fermentation (SSF). Unlike T. capillare, SF was the inducive culture for the former activity with 7.6 IU/ml. A. calidoustus produced, respectively, 1,009 μg/ml of proteins and 11.5 IU/ml of endoglucanase activity as the best results achieved. Optimum cellulase production took place after the 5th day under SF, while ligninases occurred between the 9th and the 11th days under SSF. This study reports for the first time the lignocellulolytic activities of F. nygamai and A. calidoustus. Furthermore, it underlines the potential of the four fungi as biomass decomposers for environmentally-friendly applications, emphasizing the efficiency of OS as an inducing substrate for enzyme production.

A review: Effects of microbial fermentation on the structure and bioactivity of polysaccharides in plant-based foods

Fermented plant-based foods that catering to consumers' diverse dietary preferences play an important role in promoting human health. Recent exploration of their nutritional value has sparked increasing interest in the structural and bioactive changes of polysaccharides during fermentation, the essential components of plant-based foods which have been extensively studied for their structures and functional properties. Based on the latest key findings, this review summarized the dominant fermented plant-based foods in the market, the involved microbes and plant polysaccharides, and the corresponding modification in polysaccharides structure. Further microbial utilization of these polysaccharides, influencing factors, and the potential contributions of altered structure to the functions of polysaccharides were collectively illustrated. Moreover, future research trend was proposed, focusing on the directional modification of polysaccharides and exploration of the mechanisms underlying structural changes and enhanced biological activity during fermentation.

Effect of feeding fermented distiller's grains diets on immune status and metabolomics of spleen and mesenteric lymph nodes in finishing cattle

To explore the effect of feeding fermented distiller's grains (FDG) diets on spleen and mesenteric lymph nodes (MLN) immune status and metabolomics in finishing cattle, eighteen Guanling crossbred cattle (18 months old, 250.0 ± 25 kg) were randomly divided into 3 groups: a basal diet (Control) group, an FDG-15% group, and an FDG-30% group (containing 0%, 15% and 30% FDG to partially replace the concentrates, respectively). After 75 days, the spleens and MLN were collected for detection of relative spleen weight, immune parameters, and metabolomic analysis. Compared with the Control group, FDG-30% group significantly increased (P<0.05) the relative spleen weight. In addition, the level of IL-17A in the spleen of the FDG-30% group was significantly higher than that of the FDG-15% group. Metabolomic analysis showed that differential metabolites (VIP＞1, P＜0.05) of spleen and MLN in FDG-15% and FDG-30% groups are mostly lipids and lipid molecules. KEGG analysis illustrated that choline metabolism in cancer, glycerophospholipid metabolism, biosynthesis of unsaturated fatty acids and insulin resistance were metabolic pathways in spleen shared by FDG-15% group vs.Control group and FDG-30% group vs.Control group, and choline metabolism in cancer was a metabolic pathway in MLN shared by FDG-15% group vs.Control group and FDG-30% group vs.Control group. These results suggest that feeding FDG may promote spleen development by regulating choline metabolism in cancer, glycerophospholipid metabolism, biosynthesis of unsaturated fatty acids and insulin resistance. Additionally, it may affect MLN development by regulating choline metabolism in cancer. SIGNIFICANCE: Fermented distiller's grains (FDG) is a high quality alternative to feed because it is rich in beneficial microorganisms and nutrients. The spleen and mesenteric lymph nodes (MLN) are important peripheral immune organs in animals, whose status reflects the health of the animal. However, there are few reports on the effect of feeding FDG diets on spleen and MLN immune status and metabolomics in domestic animals. In this study, we found that feeding FDG may promote spleen development by regulating choline metabolism in cancer, glycerophospholipid metabolism, biosynthesis of unsaturated fatty acids and insulin resistance metabolic pathways, and may affect MLN development by regulating choline metabolism in cancer. This study extends our understanding of the metabolomics of the spleen and MLN in FDG and helps to further understand of the immunomodulatory effects of the FDG diet.

An overview on the current status and future prospects in Aspergillus cellulase production

Cellulase is a new research point besides glucoamylase, amylase, and protease in the enzyme industry. Cellulase can decompose lignocellulosic biomass into small-molecule sugars, which facilitates microbial utilization; thus, it has a vast market potential in the field of feed, food, energy, and chemistry. The Aspergillus was the first strain used in cellulase preparation because of its safety and non-toxicity, strong growth ability, and high enzyme yield. This review provides the latest research and advances on preparing cellulase from Aspergillus. The metabolic mechanisms of cellulase secretion by Aspergillus, the selection of fermentation substrates, the comparison of the fermentation modes, and the effect of fermentation conditions have been discussed in this review. Also, the subsequent separation and purification techniques of Aspergillus cellulase, including salting out, organic solvent precipitation, ultrafiltration, and chromatography, have been declared. Further, bottlenecks in Aspergillus cellulase preparation and corresponding feasible approaches, such as genetic engineering, mixed culture, and cellulase immobilization, have also been proposed in this review. This paper provides theoretical support for the efficient production and application of Aspergillus cellulase.

Agroindustrial and food processing residues valorization for solid-state fermentation processes: A case for optimizing the co-production of hydrolytic enzymes

In the pursuit of sustainability, managing agro-industrial and food processing residues (AFR) efficiently is crucial. This study proposes a systematic approach to convert AFR into valuable products via solid-state fermentation (SSF). Using fungal enzyme production as a case study, this adaptable methodology suits any SSF bioprocess. Initially, AFR's physicochemical properties were evaluated to assess their feasible use as carbon sources and solid matrices for SSF. Then, five strains were screened for their capability to produce enzymes (Xylanase, X; pectinase, P; cellulase, C). Apple pomace (AP) and brewery spent grain (BSG) with Aspergillus sp. (strain G5) were selected. Subsequent steps involved a two-phase statistical approach, identifying critical factors and optimizing them. Process conditions were screened using a Plackett-Burman design, narrowing critical variables to three (BSG/AP, pH, humidity). Response Surface Methodology (Central Composite Design) further optimized these factors for co-synthesis of X, P, and C. The humidity had the most significant effect on the three responses. The optimum conditions depended on each enzyme and were further validated to maximize either X, P or C. The obtained extracts were used for pectin extraction from orange peels. The extract containing primarily xylanase (X = 582.39, P = 22.86, C = 26.10 U mL-1) showed major pectin yield recovery (12.33 ± 0.53%) and it was obtained using the optimal settings of BSG/AP (81/19), humidity (50.40%), and pH (4.58). The findings will enable adjusting process conditions to obtain enzymatic cocktails with a tailored composition for specific applications.

Identify the potential driving mechanism of reconstructed bacterial community in reduce CO2 emissions and promote humus formation during cow manure composting

The mineralization of organic components releases CO2 during composting, which not only leads to the loss of organic carbon, but has a direct negative impact on the environment. Malonic acid as a competitive inhibitor of succinate dehydrogenase could affect the tricarboxylic acid (TCA) cycle and reduce CO2 emissions. However, the bacterial interaction and organic component transformation has less known how to malonic acid reduce CO2 and improve of humus synthesis in complex composting. The aim of this study was to investigated the malonic acid on organic carbon sequestration and transforming cow manure waste into products with high humus content. Humus content was elevated by 16.8% and cumulative CO2 emissions (30 d)d reduced by 13.6% after malonic acid addition compared to the CK. SparCC analysis of bacterial interaction presented that the network complexity and stability was more higher with malonic acid addition, while a greater concentration of keystones and their ecological metabolic functions was observed, suggesting they weaken the influence of TCA cycle inhibition by enhancing interactions. PICRUSt predictions indicate that malonic acid might enhance humus content by promoting the synthesis of polyphenols and polymerization with amino acids. This study investigated the potential mechanism of regulators to enhance quality and reduce emissions during humification process, providing a new strategy for the resource utilization of organic solid waste.

Development and characterization of rigid packaging material using cellulose/sugarcane bagasse and natural resins

Composites developed from cellulose and natural resins have received much attention due to their low cost and positive environmental impact. Knowledge of the mechanical and degradation characteristics of cellulose based composite boards is essential to obtain indications of the strength and degradability of the resulting rigid packaging material. The composite was prepared with sugarcane bagasse and hybrid resin (a combination of epoxy and natural resin such as dammar, pine, and cashew nut shell liquid) with the mixing ratios (Bagasse fibers: Epoxy resin: Natural resin) 1:1:1.5, 1:1:1.75, and 1:1:2 using compression moulding method. Tensile strength, young's modulus, flexural strength, soil burial weight loss, microbial degradation, and CO2 evolution was determined. Cashew nut shell liquid (CNSL) resin-incorporated composite boards in the mixing ratio of 1:1:2 gave maximum flexural strength (5.10 MPa), tensile strength (3.10 MPa), and tensile modulus (0.97 MPa). The maximum degradation in soil burial test and CO2 evolution between the boards made using natural resin was found in the composite boards incorporated with CNSL resin with a mixing ratio of 1:1:1.5 were 8.30 % and 12.8 % respectively. The maximum weight loss percentage (3.49) in microbial degradation analysis was found in the composite board made using dammar resin in the mixing ratio of 1:1:1.5.

Microbial cellulase production and its potential application for textile industries

Purpose

The textile industry’s previous chemical use resulted in thousands of practical particulate emissions, such as machine component damage and drainage system blockage, both of which have practical implications. Enzyme-based textile processing is cost-effective, environmentally friendly, non-hazardous, and water-saving. The purpose of this review is to give evidence on the potential activity of microbial cellulase in the textile industry, which is mostly confined to the realm of research.

Methods

This review was progressive by considering peer-reviewed papers linked to microbial cellulase production, and its prospective application for textile industries was appraised and produced to develop this assessment. Articles were divided into two categories based on the results of trustworthy educational journals: methods used to produce the diversity of microorganisms through fermentation processes and such approaches used to produce the diversity of microbes through microbial fermentation. Submerged fermentation (SMF) and solid-state fermentation (SSF) techniques are currently being used to meet industrial demand for microbial cellulase production in the bio textile industry.

Results

Microbial cellulase is vital for increasing day to day due to its no side effect on the environment and human health becoming increasingly important. In conventional textile processing, the gray cloth was subjected to a series of chemical treatments that involved breaking the dye molecule’s amino group with Cl − , which started and accelerated dye(-resistant) bond cracking. A cellulase enzyme is primarily derived from a variety of microbial species found in various ecological settings as a biotextile/bio-based product technology for future needs in industrial applications.

Conclusion

Cellulase has been produced for its advantages in cellulose-based textiles, as well as for quality enhancement and fabric maintenance over traditional approaches. Cellulase’s role in the industry was microbial fermentation processes in textile processing which was chosen as an appropriate and environmentally sound solution for a long and healthy lifestyle.

Multi-efficient endoglucanase from Aspergillus niger MPS25 and its potential applications in saccharification of wheat straw and waste paper deinking

The deinking in the paper industry is in great demand, and microbial enzymes are key players. In the present study, the endoglucanase production from newly isolated fungi Aspergillus niger MPS25 is reported. The optimization of endoglucanase production was carried out using one factor at a time approach resulting in endoglucanase activity (2.37 IU/ml) at 45 °C and pH 8 in submerged fermentation (SmF), which shows optimum enzyme activity at 60 °C. Interestingly, the metal ions viz. Co²⁺ stimulated the endoglucanase activity, whereas Mn²⁺ reduced the enzyme activity, which shows that this enzyme can be used for effluent treatment released through deinking. The enzymatic hydrolysis of wheat straw produced 26.96 ± 0.108 mg/g of reducing sugars, indicating its potential in saccharification and the biofuel industry. Furthermore, the validation of the deinking efficiency of this enzyme resulted in improved deinking of mixed office waste and old newspapers by 31.5% and 20.4%, respectively. The strength properties, viz. burst factor and tear index, breaking length, and tensile index of the handmade paper sheets, were also improved which were analyzed by the scanning electron micrographs. The FTIR and XRD analysis of pulp provided insights into the changes in functional groups and cellulose crystallinity, respectively. These results indicate that multi-efficient endoglucanase from Aspergillus niger MPS25 is suitable for enzyme-based eco-friendly deinking for waste paper recycling and lignocellulosic biomass saccharification.

Optimization of endoglucanase-lipase-amylase enzyme consortium from Thermomyces lanuginosus VAPS25 using Multi-Objective genetic algorithm and their bio-deinking applications

In this study, the enzyme consortium of endoglucanase, lipase, and amylase was obtained and optimized using artificial intelligence-based tools. After optimization using a multi-objective genetic algorithm and artificial neural network, the enzyme activity was 8.8 IU/g, 153.68 U/g, and 19.2 IU/g for endoglucanase, lipase, and amylase, respectively, using Thermomyces lanuginosus VAPS25. The highest enzyme activity was obtained at parameters 77.69% moisture content, 52.7 °C temperature, 98 h, and 3.1 eucalyptus leaves: wheat bran ratio. The endoglucanase-lipase-amylase (END-LIP-AMY) enzyme consortium showed reliable characteristics in terms of catalytic activity at 50-80 °C and pH 6.0-9.0. The increase in deinking efficiency of 27.8% and 11.1% were obtained compared to control for mixed office waste and old newspaper, respectively, using the enzyme consortium. The surface chemical composition and fiber morphology of deinked pulp was investigated using Attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) and Scanning electron microscopy (SEM).

Lignocellulolytic Biocatalysts: The Main Players Involved in Multiple Biotechnological Processes for Biomass Valorization

Human population growth, industrialization, and globalization have caused several pressures on the planet's natural resources, culminating in the severe climate and environmental crisis which we are facing. Aiming to remedy and mitigate the impact of human activities on the environment, the use of lignocellulolytic enzymes for biofuel production, food, bioremediation, and other various industries, is presented as a more sustainable alternative. These enzymes are characterized as a group of enzymes capable of breaking down lignocellulosic biomass into its different monomer units, making it accessible for bioconversion into various products and applications in the most diverse industries. Among all the organisms that produce lignocellulolytic enzymes, microorganisms are seen as the primary sources for obtaining them. Therefore, this review proposes to discuss the fundamental aspects of the enzymes forming lignocellulolytic systems and the main microorganisms used to obtain them. In addition, different possible industrial applications for these enzymes will be discussed, as well as information about their production modes and considerations about recent advances and future perspectives in research in pursuit of expanding lignocellulolytic enzyme uses at an industrial scale.

Effect of Microparticles on Fungal Fermentation for Fermentation-Based Product Productions

Ranging from simple food ingredients to complex pharmaceuticals, value-added products via microbial fermentation have many advantages over their chemically synthesized alternatives. Some of such advantages are environment-friendly production pathways, more specificity in the case of enzymes as compared to the chemical catalysts and reduction of harmful chemicals, such as heavy metals or strong acids and bases. Fungal fermentation systems include yeast and filamentous fungal cells based on cell morphology and culture conditions. However, filamentous fungal fermentation has gained attention in the past few decades because of the diversity of microbial products and robust production of some of the most value-added commodities. This type of fungal fermentation is usually carried out by solid-state fermentation. However, solid-state fermentation poses problems during the scale-up for industrial production. Therefore, submerged fermentation for value-added products is usually preferred for scaling-up purposes. The main problem with submerged fungal fermentation is the formation of complex mycelial clumps or pellets. The formation of such pellets increases the viscosity of the media and hinders the efficient transfer of oxygen and nutrient resources in the liquid phase. The cells at the center of the clump or pellet start to die because of a shortage of resources and, thus, productivity decreases substantially. To overcome this problem, various morphological engineering techniques are being researched. One approach is the use of microparticles. Microparticles are inert particles with various size ranges that are used in fermentation. These microparticles are shown to have positive effects, such as high enzyme productivity or smaller pellets with fungal fermentation. Therefore, this review provides a background about the types of microparticles and summarizes some of the recent studies with special emphasis on the fungal morphology changes and microparticle types along with the applications of microparticles in filamentous fungal fermentations.

Application of Aspergillus niger in Practical Biotechnology of Industrial Recovery of Potato Starch By-Products and Its Flocculation Characteristics

This study developed a practical recovery for potato starch by-products by A. niger and applied it on a plant scale to completely solve the pollution problems. Soughing to evaluate the effect of A. niger applied towards the production of by-products recycling and analyze the composition and characteristics of flocculating substances (FS) by A. niger and advance a possible flocculation mechanism for by-product conversion. After fermentation, the chemical oxygen demand (COD) removal rate, and the conversion rates of cellulose, hemicellulose, pectin, and proteins were 58.85%, 40.19%, 53.29%, 50.14%, and 37.09%, respectively. FS was predominantly composed of proteins (45.55%, w/w) and polysaccharides (28.07%, w/w), with two molecular weight distributions of 7.3792 × 10⁶ Da and 1.7741 × 10⁶ Da and temperature sensitivity. Flocculation was mainly through bridging and ionic bonding, furthermore, sweeping effects may occur during sediment. Flocculation was related to by-products conversion. However, due to severe pollution problems and resource waste, and deficiencies of existing recovery technologies, converting potato starch by-products via A. niger liquid fermentation merits significant consideration.

Kinetic Model for Enzymatic Hydrolysis of Cellulose from Pre-Treated Rice Husks

Rice husks contain cellulose as a raw material for manufacturing second-generation bioethanol. Cellulose from pre-treated rice husks was converted into reducing sugars through enzymatic hydrolysis using enzymes derived from Aspergillus niger. This study aims to determine the kinetics of enzymatic hydrolysis at enzyme concentrations of 10, 15, and 20% (v/w) and hydrolysis times of 5, 10, 15, 20, and 25 h. The results showed that cellulose was hydrolyzed to form reducing sugars. The CMCase activity and FPase activity reached 548.940 and 314.892 U mL−1, respectively, much higher than most previous reports on this genus. From the calculation of the reaction rate using the Michaelis–Menten kinetic model, the value of the Michaelis constant ranges from 0.001 to 0.0007, and the maximum rate is 1.3 × 10−7 to 2.7 × 10−7 Mol L−1 s−1. The highest reducing sugar concentration was obtained (1.80 g L−1) at an enzyme concentration of 20% (v/w) and a hydrolysis time of 25 h.