An evaluation of the impact of multiwalled carbon nanotubes on soil microbial community structure and functioning

The intrinsic and extrinsic mechanisms regulated by functional carbon nanodots for the phytoremediation of multi-metal pollution in soils

Functional carbon nanodots (FCNs) were currently demonstrated to regulate plant behavior in the agricultural and environmental areas. However, their regulation mechanisms on the interactions of plant-soil system during phytoremediation remain unrevealed. Here, Solanum nigrum L. was employed to explore the intrinsic and extrinsic mechanisms regulated by FCNs in the phytoremediation of Cd-Pb co-contaminated soils. The mediation of FCNs on metal removal and plant growth showed a hormesis manner, wherein the maximum induction effect was contributed by 15 mg kg-1 FCNs. Cd/Pb removal were enhanced by 8.5% and 31.6%, respectively. Moreover, FCNs reallocate metal distribution in plant by immobilized metals in roots and suppressed metal translocation to leaves. Improving plant growth (by 82.8% for root), stimulating plant hormesis, and activating plant detoxification pathways are the intrinsic mechanism for the phytoremediation smartly regulated by FCNs. Notably, FCNs induced soil enzyme activities that associated with soil nutrients recycling, up-regulated the microbial diversity and the soil immune system, and regulated S. nigrum L. to recruit beneficial microbials in the rhizosphere. The above-mentioned comprehensive improvement of soil micro-environment is the extrinsic mechanism regulated by FCNs. This study provides new insights to evaluate the interactions of nanomaterials with plant-soil system under soil contamination.

Bioremediation of contaminated soil and groundwater by in situ biostimulation

Bioremediation by in situ biostimulation is an attractive alternative to excavation of contaminated soil. Many in situ remediation methods have been tested with some success; however, due to highly variable results in realistic field conditions, they have not been implemented as widely as they might deserve. To ensure success, methods should be validated under site-analogous conditions before full scale use, which requires expertise and local knowledge by the implementers. The focus here is on indigenous microbial degraders and evaluation of their performance. Identifying and removing biodegradation bottlenecks for degradation of organic pollutants is essential. Limiting factors commonly include: lack of oxygen or alternative electron acceptors, low temperature, and lack of essential nutrients. Additional factors: the bioavailability of the contaminating compound, pH, distribution of the contaminant, and soil structure and moisture, and in some cases, lack of degradation potential which may be amended with bioaugmentation. Methods to remove these bottlenecks are discussed. Implementers should also be prepared to combine methods or use them in sequence. Chemical/physical means may be used to enhance biostimulation. The review also suggests tools for assessing sustainability, life cycle assessment, and risk assessment. To help entrepreneurs, decision makers, and methods developers in the future, we suggest founding a database for otherwise seldom reported unsuccessful interventions, as well as the potential for artificial intelligence (AI) to assist in site evaluation and decision-making.

Understanding the role of graphene oxide in affecting PAHs biodegradation by microorganisms: An integrated analysis using 16SrRNA, metatranscriptomic, and metabolomic approaches

Graphene oxide (GO)-promoted microbial degradation technology is considered an important strategy to eliminate polycyclic aromatic hydrocarbons (PAHs) in the environment; however, the mechanism by which GO affects microbial degradation of PAHs has not been fully studied. Thus, this study aimed to analyze the effect of GO-microbial interaction on PAHs degradation at the microbial community structure, community gene expression, and metabolic levels using multi-omics combined technology. We treated PAHs-contaminated soil samples with different concentrations of GO and analyzed the soil samples for microbial diversity after 14 and 28 days. After a short exposure, GO reduced the diversity of soil microbial community but increased potential degrading microbial abundance, promoting PAHs biodegradation. This promotion effect was further influenced by the GO concentration. In a short period of time, GO upregulated the expression of genes involved in microbial movement (flagellar assembly), bacterial chemotaxis, two-component system, and phosphotransferase system in the soil microbial community and increased the probability of microbial contact with PAHs. Biosynthesis of amino acids and carbon metabolism of microorganisms were accelerated, thereby increasing the degradation of PAHs. With the extension of time, the degradation of PAHs stagnated, which may be due to the weakened stimulation of GO on microorganisms. The results showed that screening specific degrading microorganisms, increasing the contact area between microorganisms and PAHs, and prolonging the stimulation of GO on microorganisms were important means to improve the biodegradation efficiency of PAHs in soil. This study elucidates how GO affects microbial PAHs degradation and provides important insights for the application of GO-assisted microbial degradation technology.

Nano-Nd2O3 reduced soil bacterial community function by altering the relative abundance of rare and sensitive taxa

Nanoparticulate-Nd₂O₃ (nano-Nd₂O₃) has been excessively utilized in agriculture, industry, and medicine. Hence, nano-Nd₂O₃ can have environmental implications. However, the impact of nano-Nd₂O₃ on alpha diversity, composition, and function of soil bacterial communities has not been thoroughly evaluated. We amended soil to achieve different concentrations of nano-Nd₂O₃ (0, 10, 50, and 100 mg kg^-1 soil) and incubated the mesocosms for 60 days. On days 7 and 60 of the experiment, we measured the effect of nano-Nd₂O₃ on alpha diversity and composition of soil bacterial community. Further, the effect of nano-Nd₂O₃ on the function of soil bacterial community was assessed based on changes in the activities of the six potential enzymes that mediate the cycling of nutrients in the soil. Nano-Nd₂O₃ did not alter the alpha diversity and composition of the soil bacterial community; however, it negatively affected community function in a dose-dependent manner. Specifically, the activities of β-1,4-glucosidase and β-1,4-n-acetylglucosaminidase that mediate soil carbon and nitrogen cycling, respectively, were significantly affected on days 7 and 60 of the exposure. The effect of nano-Nd₂O₃ on the soil enzymes correlated with changes in relative abundances of the rare and sensitive taxa, viz., Isosphaerales, Isosphaeraceae, Ktedonobacteraceae, and Streptomyces. Overall, we provide information for the safe implementation of technological applications that use nano-Nd₂O₃.

Coenzyme corona formation on carbon nanotubes leads to disruption of the redox balance in metabolic reactions

Carbon nanotubes (CNTs) have adverse impacts on metabolism in biological systems. The impacts should be associated with interactions of the CNTs with coenzymes, such as nicotinamide adenine dinucleotide (NAD), because most metabolic processes are governed by coenzyme-dependent reactions. This study demonstrates that NAD molecules adsorb onto the CNT surface, leading to the formation of interfacial NAD layers-in other words, a coenzyme corona (coenzyme-based biomolecular corona). Coenzyme corona formation is accompanied by the oxidation of NAD at biological concentrations through electron transfer. Similar phenomena are observed for NAD derivatives. Molecular dynamics simulations indicate that the adsorption of NAD onto CNTs is driven by interactions between the aromaphilic groups of NAD and the CNT surfaces, leading to coenzyme corona formation. Generally, in living biological systems, the balance of NAD redox (NADH/NAD⁺ redox) is maintained to sustain metabolism. The present results suggest that CNTs affect coenzyme-dependent metabolic reactions by disrupting the redox balance through coenzyme corona formation and subsequent coenzyme oxidation. The proposed molecular mechanism not only advances the fundamental understanding of the biological impact of CNTs in terms of metabolism but also contributes to biological CNT applications.

Graphene oxide decreases the abundance of nitrogen cycling microbes and slows nitrogen transformation in soils

Graphene oxide (GO) has been widely used in many applications due to its excellent properties. Given the extensive production and use of this nanomaterial, its release into the environment is inevitable. However, little is known about the effects of GO on microbial nitrogen transformation and the related processes after GO enters the soil environment. The present study showed that GO significantly reduced soil microbial biomass and caused a decline in microbial diversity after the soils were subjected to various GO concentrations (10, 100, and 1000 mg kg^-1) for 4 months. Among them, the abundances of nitrogen transformation related bacteria such as Firmicutes, Nitrospirota, Proteobacteria, Planctomycetota, and Cyanobacteria were significantly decreased with GO incubation. Among the enzymes that are related to nitrogen transformation, nitrate reductase was the most sensitive even at low concentrations of GO, followed by ammonia monooxygenase and urease, which were reduced by 13-31%, 5-26%, and 9-19% respectively, than those of the control. We found that high concentrations of GO significantly increased the retention of soil urea by 32-59%, and the contents of ammonium and nitrate were 22-28% and 55-69% lower compared to those of the control, respectively. Moreover, the response of most of the indicators in the above process to multilayer GO was more significant than that to single layer GO. Overall, this study provides new insights into the comprehensive understanding of GO's impacts on the soil nitrogen cycle.

The Widespread Use of Nanomaterials: The Effects on the Function and Diversity of Environmental Microbial Communities

In recent years, as an emerging material, nanomaterials have rapidly expanded from laboratories to large-scale industrial productions. Along with people's productive activities, these nanomaterials can enter the natural environment of soil, water and atmosphere through various ways. At present, a large number of reports have proved that nanomaterials have certain toxic effects on bacteria, algae, plants, invertebrates, mammalian cell lines and mammals in these environments, but people still know little about the ecotoxicology of nanomaterials. Most relevant studies focus on the responses of model strains to nanomaterials in pure culture conditions, but these results do not fully represent the response of microbial communities to nanomaterials in natural environments. Over the years, the effect of nanomaterials infiltrated into the natural environment on the microbial communities has become a popular topic in the field of nano-ecological environment research. It was found that under different environmental conditions, nanomaterials have various effects on the microbial communities. The medium; the coexisting pollutants in the environment and the structure, particle size and surface modification of nanomaterials may cause changes in the structure and function of microbial communities. This paper systematically summarizes the impacts of different nanomaterials on microbial communities in various environments, which can provide a reference for us to evaluate the impacts of nanomaterials released into the environment on the microecology and has certain guiding significance for strengthening the emission control of nanomaterials pollutants.

Nanobioremediation: A sustainable approach for the removal of toxic pollutants from the environment

In recent years, the proportion of organic and inorganic contaminants has increased rapidly due to growing human interference and represents a threat to ecosystems. The removal of these toxic pollutants from the environment is a difficult task. Physical, chemical and biological methods are implemented for the degradation of toxic pollutants from the environment. Among existing technologies, bioremediation in combination with nanotechnology is the most promising and cost-effective method for the removal of pollutants. Numerous studies have shown that exceptional characteristics of nanomaterials such as improved catalysis and adsorption properties as well as high reactivity have been subjects of great interest. There is an emerging trend of employing bacterial, fungal and algal cultures and their components, extracts or biomolecules as catalysts for the sustainable production of nanomaterials. They can serve as facilitators in the bioremediation of toxic compounds by immobilizing or inducing the synthesis of remediating microbial enzymes. Understanding the association between microorganisms, contaminants and nanoparticles (NPs) is of crucial importance. In this review, we focus on the removal of toxic pollutants using the cumulative effects of nanoparticles with microbial technology and their applications in different domains. Besides, we discuss how this novel nanobioremediation technique is significant and contributes towards sustainability.

Alleviation role of functional carbon nanodots for tomato growth and soil environment under drought stress

The biotoxicity and environmental applications of carbon nanomaterials have always been the focus of research. In this research, functional carbon nanodots (FCNs) show high promotion effects on regulating the growth, development and yield of tomato under drought stress, due to their up-regulation effects on the physiological processes of plants including photosynthesis, antioxidant system, osmotic adjustment, as well as soil amelioration in physicochemical properties and microbial environment during vegetative and reproductive growth stage. The reduction of tissue water content and water use efficiency are moderated by FCNs through improving root vigor and osmolytes (soluble sugar and proline) level, which contributes to maintain the enzyme function, photosynthesis and nutrient uptake in plant. FCNs regulate the enzymatic and non-enzymatic antioxidant system to scavenge reactive oxygen species (ROS) and inhibit the lipid peroxidation, thus protect the membrane structure and function of plant cells under stress. FCNs up-regulate soil microbial communities under drought stress by regulating the soil pH, enzyme activity, organic carbon and organic matters contents. Our results prove that FCNs are biological friendly to plant growth and soil environment under drought stress, thus exhibit potential as emendator to promote plant tolerance and improve agricultural productivity in water-deficient areas.

When nanoparticle and microbes meet: The effect of multi-walled carbon nanotubes on microbial community and nutrient cycling in hyperaccumulator system

Carbon nanotubes can potentially stimulate phytoremediation of heavy metal contaminated soil by promoting plant biomass and root growth. Yet, the regulating mechanism of carbon nanotubes on the rhizosphere microenvironment and their potential ecological risks remain poorly characterized. The purpose of this study was to systematically evaluate the effects of multi-walled carbon nanotubes (MCNT) on the diversity and structure of rhizosphere soil bacterial and fungal communities, as well as soil enzyme activities and nutrients, in Solanum nigrum L. (S. nigrum)-soil system. Here, S. nigrum were cultivated in heavy metal(loid)s contaminated soils applied with MCNT (100, 500, and 1000 mg kg^-1 by concentration, none MCNT addition as control) for 60 days. Our results demonstrated more significant urease, sucrase, and acid phosphatase activities in MCNT than in control soils, which benefit to promoting plant growth. Also, there were significant reductions in available nitrogen and available potassium contents with the treatment of MCNT, while the organic carbon and available phosphorus were not affected by MCNT application. Notably, the alpha diversity of bacterial and fungal communities in the MCNT treatments did not significantly vary relative to control. However, the soil microbial taxonomic compositions were changed under the application of MCNT. Compared to the control, MCNT application increased the relative abundances of the Micrococcaceae family, Solirubrobacteraceae family, and Conexibacter genus, which were positively correlated with plant growth. In addition, the non-metric multidimensional scaling (NMDS) analysis revealed that the community structure of bacterial and fungal communities did not significantly change among all the treatments, and bacterial community structure was significantly correlated with soil organic carbon. At the same time, sucrase activity had the highest relation to fungal community structure. This study highlighted soil microbes have strong resistance and adaptation ability to carbon nanotubes with existence of plants, and revealed linkage between the rhizosphere microenvironment and plant growth, which well improved our understanding of carbon nanotubes in heavy metal phytoremediation.

Can the multi-walled carbon nanotubes be used to alleviate the phytotoxicity of herbicides in soils?

Herbicides are commonly used globally. However, residual herbicides in soils for ages often result in phytotoxicity and serious yield loss to subsequent crops. In this paper, the multi-walled carbon nanotubes (MWCNTs) were utilized to amend the herbicide polluted soil, and the adsorption performance of herbicides to MWCNTs amended soil was studied. Results indicate efficient alleviation of herbicide-induced phytotoxicity to rice and tobacco due to MWCNTs amendment. When 0.4% MWCNTs were applied, the concentration of sulfentrazone that inhibited the same rice height by 50% (IC₅₀) increased to more than 3 times that of pure soil. When the MWCNTs were used to alleviate the phytotoxicity of quinclorac to tobacco, the MWCNTs not only alleviated the phytotoxicity of quinclorac but also promoted the growth of tobacco. The MWCNTs amended soil significantly increased the adsorption of herbicide to soil than biochar. The soil microbial analysis shows that MWCNTs had no significant effect on soil microbial community diversity, but the long-term exposure to MWCNTs could change the structure of the soil microbial community. Above all, our results highlighted the potential implication of the MWCNTs to ensure crop production by promoting crop growth and reducing the residual bioavailability of herbicides.

Implication of Wood-Derived Hierarchical Carbon Nanotubes for Micronutrient Delivery and Crop Biofortification

A similarity of metal alloy encapsulation with the micronutrient loading in carbon nanoarchitecture can be fueled by exploring carbon nanocarriers to load micronutrient and controlled delivery for crop biofortification. A wood-derived nanoarchitecture model contains a few-graphene-layer that holds infiltrated alloy nanoparticles. Such wood-driven carbonized framework materials with legions of open porous architectures and minimized-tortuosity units further decorated carbon nanotubes (CNTs), which originate from heat treatment to carbonized wood samples. These wood-derived samples can alleviate micronutrient nanoparticle permeation and delivery to the soil. A rapid heat shock treatment can help in distributing N-C-NiFe metal alloy encapsulation in carbon frameworks uniformly in that case; higher heating and rapid extinction of heat shock have led to formation of good dispersion of nanoparticles. The wood-carbon framework decorated with metal alloys displays promising electrocatalytic features and cyclic stability for hydrogen evolution. Envisaged from this strategy, we obtain enough evidence to form an opinion that a singular heat shock process can even lead to a strategy of faster growth of a wood-carbon network with well-dispersed micronutrient metal salts in porous matrices for high-efficiency delivery to the soil. Having envisaged the formation of ultrafine nanoparticles with a good dispersion profile in the case of transition metals and alloy encapsulation in the carbon network due to the rapid heating and quenching rates, we anticipate that the loading of micronutrients in the wood-derived nanoarchitecture of carbonized wood derived carbon nanotube (CW-CNT), which can offer an application in seed germination and enhance growth rates of crops. The experience of controlled experiments on germination of tomato seeds on a medium containing CW-CNT that can diffuse the seed coat with the promotion of water uptake inside seeds for enhanced germination and growth of tomato seedlings can be further extended to cereal crops.

Evaluation of the combined toxicity of multi-walled carbon nanotubes and cadmium on earthworms in soil using multi-level biomarkers

The coexistence of multi-walled carbon nanotubes (MWCNTs) with cadmium (Cd) in soil may cause the combined biological effects, but few study reported about their joint toxic effects on earthworms. Therefore, this study investigated the effects of sub-lethal levels of MWCNTs (10, 50, 100 mg/kg) and Cd (2.0, 10 mg/kg) on earthworms Eisenia fetida for 14 days. The changes in multi-level biomarkers of growth inhibition rate, cytochrome P450 isoenzymes (CYP1A2, 2C9 and 3A4), and small molecular metabolites (metabolomics) were determined. The toxic interaction between MWCNTs and Cd was characterized by the combination of the biomarker integration index (BRI), joint effect index concentration addition index (CAI), and the effect concentration addition index (EAI). The results showed that the single MWCNTs exposure caused insignificant change in most biomarkers, while the combined exposure of MWCNTs (50-100 mg/kg) and 10 mg/kg Cd led to significant changes in ten most important metabolites identified by metabolomics and activities of CYP1A2, 2C9, and 3A4. Compared with the toxicity of Cd alone, the combined toxicity of the mixture was significantly reduced. According to the integration of BRI and CAI/EAI, a clearly antagonistic interaction at relatively low effects was observed between MWCNTs and Cd. The responses of multiple biomarkers suggest the toxic action mode of the mixture on earthworms was related to the oxidative injury, and the disruption of amino acid, purine, and pyrimidine metabolism, and the urea cycle.

Medium-term response of the natural grassland soil biota to multiwalled carbon nanotube contamination

Although the soil environment can potentially be exposed to contamination by carbon nanotubes (CNT), its impact on soil biology is poorly understood. In this study, we investigated the effect of the multiwalled CNT (MWCNT) contamination on different groups of soil organisms (microbial, micro- and mesofaunal communities) as well as the soil enzyme activity. The experimental mesocosms included the intact soil cores that were collected from a natural grassland. The MWCNTs that were pristine (pCNTs) and functionalised (fCNTs) at a concentration of 500 μg g^-1 of soil were applied in the form of water suspensions to the surface of the mesocosms, while ensuring the soil was not mixed after the treatment. Soil samples were taken at 3, 6, and 15 weeks after CNT application. The CNT soil contamination highlighted differences in the community dynamics within the studied groups when compared to the control (non-contaminated soil). Among the faunal groups, nematodes were found to be more sensitive to the CNT impact than mites. The most pronounced response of the nematodes was observed in the subsoil at week 6, when their numbers were 3- (pCNTs) and 4-fold (fCNTs) higher than the control mesocosms. Both types of CNTs influenced the relative abundance of the bacterial- and hyphal-feeding nematodes, where pCNTs significantly and negatively affected the predatory nematodes. Moreover, CNTs temporarily, but significantly, decreased the diversity of the nematode communities. In addition, the values of the nematode Structure Index confirmed a strong transitional disturbance effect of CNTs in the soil food web, while the Channel Index in the pCNTs indicated an increasing share of fungi in the decomposition pathway. Hence, we can infer that although the impact of CNTs seems to be temporary, the shifts in the soil community abundance and structure that it induced may have long-term consequences for soil functioning, including nutrient cycling.

Stronger impacts of long-term relative to short-term exposure to carbon nanomaterials on soil bacterial communities

Environmental impacts of carbon nanomaterials (CNMs) have been attracting increasing concerns in recent years. Knowledge on how short-term exposure to CNMs influences soil microbial communities is available. However, little is known about the possible difference in effects of long-term versus short-term exposure of CNMs on soil microbial communities. In this study, we systematically compared effects of fullerene (C₆₀), single-walled carbon nanotubes (SW), and graphene (GR) on soil bacterial communities over short (30 d) and long (360 d) term exposure durations. Our findings revealed that short-term exposure to all CNMs significantly increased the alpha diversity of soil bacterial communities. SW and GR exposure for 360 d relative to that for 30 d more significantly decreased their alpha diversity. Compared to short-term exposure, a long term exposure to CNMs more strongly altered the beta diversity of soil bacterial communities. LEfSe analysis showed that, GR relative to C₆₀ and SW exposure more strongly altered soil bacterial community composition especially for long-term duration at various taxonomic levels; more taxa were also identified by LEfSe analysis as biomarkers upon long-term GR exposure. More OTUs were affected by long-term GR exposure. These differences resulted from both distinct physicochemical properties of various CNMs and their exposure durations.

Graphene oxide affects growth and physiological indexes in Larix olgensis seedlings and the soil properties of Haplic Cambisols in Northeast China

Changbai larch (Larix olgensis A. Henry) seedlings growing in a Haplic Cambisol and receiving 0 (Ck), 25, 50, 100, 250, or 500 mg L^-1 graphene oxide (GO) were incubated for 30, 40, or 50 days, and the effects of applying GO on the growth and physiological characteristics of the seedlings and soil chemical properties and enzyme activities were investigated. The superoxide anion (except for 25 mg L^-1 at 40 days and 50 mg L^-1 at 50 days) and hydrogen peroxide contents of the leaves increased at 25-100 mg L^-1 GO; however, superoxide dismutase (SOD) and peroxidase (POD) (except for 100 mg L^-1 at 50 days) activities, soluble protein (except for 100 mg L^-1 at 30 and 40 days), proline (except for 100 mg L^-1 at 50 days), as well as seedling biomass (except for stems at 25-100 mg L^-1, and leaves and roots at 50-100 mg L^-1 for 30 days) all decreased. However, when the seedlings were exposed to 250-500 mg L^-1 GO, especially at 40 and 50 days, these trends for tree growth and physiological parameters were reversed, suggesting the beneficial effect of GO at high concentrations on the seedlings. GO decreased the organic matter, alkali-hydrolyzale nitrogen, available phosphorus, and potassium contents of the soil at 40 and 50 days (except for available phosphorus at 50 days), as well as the acid phosphatase, urease (except for 30 days), dehydrogenase, and catalase activities (except for 30 and 40 days); thus, GO may inhibit nitrogen and phosphorus cycling in Haplic Cambisols (except for nitrogen at 30 days).

Impacts of carbon-based nanomaterials on nutrient removal in constructed wetlands: Microbial community structure, enzyme activities, and metabolism process

The increasing use of raw carbon-based nanomaterials (CBNs) will inevitably affect wastewater treatment systems. Constructed wetlands (CWs) are ecological wastewater treatment facilities and can intercept the vast particles pollutant, including CBNs. However, the impacts of CBNs on the treatment performance of CWs have no available knowledge. Therefore, we systematically inspected the effects of single-walled and multi-walled carbon nanotubes (SWCNTs and MWCNTs) and fullerene nanoparticles (C₆₀) on CW performance under 180-day exposure to 0, 10 and 1000 μg/L concentrations. The results showed that CBNs had marginally adverse impacts on chemical oxygen demand (COD) and total phosphorus (TP) removal, whereas nitrogen removal declined by 24.1 %-42.7 % following long-term exposure to CBNs. MWCNTs had the greatest inhibition effect on nitrogen removal, followed by SWCNTs and C₆₀. The CBNs also induced reactive oxygen species (ROS) overproduction as the increasing concentration, which confirmed that CBNs have biotoxic effects in CWs. The variation of functional microbial community and the inhibition of enzyme activities were the dominant reasons for the decline in nitrogen removal efficiency. Furthermore, predictive functional profiling showed that CBNs affected functional gene abundance, and caused a decline in the enzymes abundance connected to nitrogen removal by the end of the 180-day exposure period.

Effects of hydroxyl, carboxyl, and amino functionalized carbon nanotubes on the functional diversity of microbial community in riverine sediment

Nowadays, more and more attention is focused on the environmental harm brought by the wide production and use of carbon nanotubes. In this study, the metabolic function of sediment microbial community was investigated after unfunctionalized or functionalized multi-walled carbon nanotubes (MWCNTs) were incorporated. The surface functional groups on the studied functionalized MWCNTs in this work were hydroxyl, carboxyl, and amino, respectively. The metabolic functional diversity was determined by Biolog EcoPlates after one-month exposure to MWCNTs. Incorporating 0.5 wt% amino functionalized MWCNTs significantly decreased the microbial activity and diversity, and all types of MWCNTs caused great inhibition on the microbial metabolism at the dosage of 2.0 wt%. The sediment microbes preferred polymers and amino acids. Principal component and similarity analysis indicated that the microbial carbon metabolism was more affected by the MWCNT dosage compared with the functionalization, and 2.0 wt% amino functionalized MWCNTs made the greatest difference in metabolic function of sediment microbial community. These consequences may help to assess the environmental risks of MWCNTs from the aspect of ecological relevance of sediment microbial community.

Vegetation alleviate the negative effects of graphene oxide on benzo[a]pyrene dissipation and the associated soil bacterial community

Graphene oxide (GO) will enter the soil environment in increasing amounts. The effects of GO on the dissipation of benzo[a]pyrene (B[a]P) from contaminated soil and their phytoremediation system have been explored in this study. B[a]P is a ubiquitous soil pollutant used as a representative indicator of polycyclic aromatic hydrocarbons. A pot experiment was performed to investigate the effects of GO or/and vegetation (Tagetes patula) on B[a]P dissipation and the associated bacterial communities in soil. The bacterial communities in soil were investigated by Illumina sequencing analysis. The presence of vegetation significantly enhanced the dissipation of B[a]P from soil. The addition of GO (100 mg/kg) significantly decreased the B[a]P dissipation. When vegetation and GO coexisted, the inhibition effects of GO on B[a]P dissipation were alleviated by vegetation. Compared with the control treatment, the presence of GO or vegetation had no significant effects on the richness and diversity of bacterial communities in B[a]P-contaminated soil. Compared with the presence of only vegetation, the richness and diversity all significantly decreased when vegetation and GO coexisted. And, vegetation had a greater influence on the bacterial community composition than GO. Vegetation alleviated the inhibition effects of GO on B[a]P dissipation and had a greater influence on the associated bacterial communities than GO. This work helps to understand the interactive effects of GO and vegetation on B[a]P dissipation and the associated bacterial communities in contaminated soil.

Impact of different environmental particles on degradation of dibutyl phthalate in coastal sediments with and without Cylindrotheca closterium

This study investigated the impact of different environmental particles at different concentrations (0.2% and 2%, w/w) on biodegradation of dibutyl phthalate (DBP) in sediments with and without Cylindrotheca closterium, a marine benthic diatom. The particles included biochar pyrolyzed at 400 °C, multi-walled carbon nanotube (MWNT), nanoscale zero-valent iron (nZVI) and polyethylene microplastic. In treatments without C. closterium, inhibition effect of the particles on degradation percentage of DBP (up to 15.7% decrement except 1.7% increment for 0.2% nZVI) increased with the increase of particle sorption ability to DBP and particle concentration in general. The results of 16s rDNA sequencing showed that C. closterium was probably the most abundant DBP-degrader, accounting for 20.0-49.3% of the total taxon read numbers. In treatments with C. closterium, inoculation of C. closterium increased the degradation percentage of DBP in all treatments with particle addition by 0.0-11.3%, which increased with the increase of chlorophyll a content in general but decreased with the increase of particle concentration from 0.2% to 2%. The increment was the highest for treatment with 0.2% nZVI addition due to its highest promotion effect on algal growth. In contrast, the increment was the lowest for treatments with MWNT addition due to its strong sorption to DBP and strong inhibition on the growth of C. closterium. Our findings suggested that the environmental particles could influence bioavailability of DBP by sorption and biomass of C. closterium, and thus degradation of DBP in sediments.

Carbon nanomaterials affect carbon cycle-related functions of the soil microbial community and the coupling of nutrient cycles

Many studies have examined changes in soil microbial community structure and composition by carbon nanomaterials (CNMs). Few, however, have investigated their impact on microbial community functions. This study explored how fullerene (C₆₀) and multi-walled carbon nanotubes (M50) altered functionality of an agricultural soil microbial community (Archaea, Bacteria and Eukarya), using microcosm experiments combined with GeoChip microarray. M50 had a stronger effect than C₆₀ on alpha diversity of microbial functional genes; both CNMs increased beta diversity, resulting in functional profiles distinct from the control. M50 exerted a broader, severer impact on microbially mediated nutrient cycles. Together, these two CNMs affected CO₂ fixation pathways, microbial degradation of diverse carbohydrates, secondary plant metabolites, lipids and phospholipids, proteins, as well as methanogenesis and methane oxidation. They also suppressed nitrogen fixation, nitrification, dissimilatory nitrogen reduction, eukaryotic assimilatory nitrogen reduction, and anaerobic ammonium oxidation (anammox). Phosphorus and sulfur cycles were less vulnerable; only phytic acid hydrolysis and sulfite reduction were inhibited by M50 but not C₆₀. Network analysis suggested decoupling of nutrient cycles by CNMs, manifesting closer and more hierarchical gene networks. This work reinforces profound impact of CNMs on soil microbial community functions and ecosystem services, laying a path for future investigation in this direction.

Interaction of graphene-family nanomaterials with microbial communities in sequential batch reactors revealed by high-throughput sequencing

The accelerated development and application of graphene-family nanomaterials (GFNs) have increased their release to various environments and converged in wastewater treatment plants (WWTPs). However, little is known about the interactions between GFNs and microbes in WWTPs. In this study, the interaction of graphene oxide (GO) or graphene (G) at different concentrations with microbial communities in sequential batch reactors was investigated. Transmission electron microscopy and Raman spectroscopy analyses showed that the structures of GFNs were obviously changed, which suggested GFNs could be degraded by some microbes. Significantly higher DNA concentration and lower cell number in high-concentration GO group were detected by DNA leakage test and qPCR analysis, which confirmed the microbial toxicity of GO. The chemical oxygen demand and ammonia nitrogen removals were significantly affected by G and GO with high concentrations. Further, high-throughput sequencing confirmed the composition and dynamic changes of microbial communities under GFNs exposure. Saccharibacteria genera incertae sedis (12.55-28.05%) and Nakamurella (20.45-29.30%) were the predominant genera at two stages, respectively. FAPROTAX suggested 12 functional groups with obvious changes related to the biogeochemical cycle of C, N and S. Molecular ecological network analysis showed that the networks were more complex in the presence of GFNs, and the increased negative interactions reflected more competition relationships in microbial communities. This study is the first to report the effect of GFNs on network of microbial communities, which provides in-depth insights into the complex and highlights concerns regarding the risk of GFNs to WWTPs.

Influence of multi-walled carbon nanotubes on the microbial biomass, enzyme activity, and bacterial community structure in 2,4-dichlorophenol-contaminated sediment

The rise in manufacture and use of carbon nanotubes has aroused the concern about their potential risks associated with coexisting pollutants in the aquatic environment. 2,4-dichlorophenol (2,4-DCP), with a high toxicity to many aquatic organisms, is a widespread pollutant resulting from the extensive use of pesticides and preservatives. In this article, the adsorption of 2,4-DCP by riverine sediment and the responses of sediment microbial community to 2,4-DCP were studied in the presence of multi-walled carbon nanotubes (MWCNTs). Adding MWCNTs significantly increased the adsorption amount of sediment for 2,4-DCP from 0.541 to 1.44 mg/g as the MWCNT concentration increased from 0 to 15 mg/g. The responses of sediment microbial community were determined after one-month exposure to MWCNTs at different concentrations (0.05, 0.5, 5, and 50 mg/g). The microbial biomass carbon in the sediment contaminated with 2,4-DCP increased in the presence of 5 mg/g of MWCNTs (from 0.06 to 0.11 mg/g), but not significantly changed at other MWCNT concentrations. For the sediments contaminated with 2,4-DCP, the presence of MWCNTs made no difference to urease activity, while the dehydrogenase activity slightly increased with the addition of 5 mg/g of MWCNTs and decreased in the presence of 50 mg/g of MWCNTs. The changes of sediment bacterial communities were further determined by 16S rRNA gene sequencing. Based on the weighted UniFrac distance between communities, the clustering analysis suggested that the contamination of 2,4-DCP affected the bacterial community structure in a greater degree than that caused by MWCNTs at relatively low concentrations (≤5 mg/g). Bacteroidetes, Planctomycetes, and Nitrospirae were feature bacterial phyla to reflect the effects of MWCNTs and 2,4-DCP on sediment bacterial community. These results may contribute to the understanding of microbial community response to co-exposure of MWCNTs and 2,4-DCP and the assessment of associated ecological risks.

Characteristics and in situ remediation effects of heavy metal immobilizing bacteria on cadmium and nickel co-contaminated soil

Cadmium (Cd) and nickel (Ni) in soil have caused serious environmental problems and increased healthy risks to humans and biota, it is vital important and necessary to develop effective methods to resolve the combined contaminated problems. In this study, strains L5 and L6 with good heavy metal resistant and immobilizing capacities were isolated from Cd and Ni contaminated soil. Bacterial characteristic experiment illustrated that many functional groups (-OH, -NH₂ and -COO et al.) were distributed on the surface of L5 and L6. Under the stress of heavy metals, bacterial appearances were distorted. The pot experiment indicated that the concentrations of HOAc-extractable Cd and Ni in soil reduced 6.26-15.33% and 13.31-19.53% with the inoculation of L5 and L6. In addition, the immobilization rates on Cd and Ni improved 61.27-128.50% and 23.69-39.66% with re-inoculation of strains L5 and L6 at 30 days, respectively. After inoculation of strains L5 and L6 for 60 days, the activities of FDA hydrolysis, acid phosphatase, urease, invertase and dehydrogenase in soil increased obviously. Furthermore, bacterial diversity indexes and community structure of soil were also improved. Thus, given the beneficial remediation effects of the isolated strains, L5 and L6 have great potentials for heavy metals contaminated soil remediation.

Effects of Graphene on Larix olgensis Seedlings and Soil Properties of Haplic Cambisols in Northeast China

We investigated the impacts of graphene application at different concentrations on the growth and physiological characteristics of Changbai larch (Larix olgensis A. Henry) seedlings and the chemical properties and enzyme activities of Haplic Cambisols under these seedlings. The aim is to evaluate the environmental effects of graphene on the afforestation species and the zonal forest soils of Northeast China. Seedlings receiving 0 (CK), 25, 50, 100, 250, or 500 mg L−1 graphene were incubated for 30, 40, or 50 days. Low concentrations (25–50 mg L−1) of graphene increased the dry masses of root, stem, and leaf; however, high concentrations (100–500 mg L−1) inhibited them. Compared with those under 0 mg L−1 graphene, the root length, surface area, volume, and average diameter all increased during the early stages of incubation (i.e., 30 and 40 days) under low concentration of graphene (<50 or 100 mg L−1) and decreased at higher graphene concentration (>100 mg L−1); at 50 days, they were significantly inhibited. At 30 days, graphene decreased superoxide dismutase (SOD) and peroxidase (POD) activities, as well as pigment, soluble protein, and proline contents, and the decline increased with increasing graphene concentration; at 40 and 50 days, the above parameters increased initially and then decreased, reaching a maximum at 50 mg L−1. The changes in relative conductivity and malondialdehyde (MDA), superoxide anion and hydrogen peroxide contents were the opposite of those in the physiological indexes mentioned above. Therefore, graphene caused different degrees of oxidative stress in L. olgensis seedlings. At 30 days, graphene generally increased the organic matter, hydrolytic nitrogen, and available phosphorus and potassium contents of Haplic Cambisols, but these parameters decreased at 40 and 50 days. Graphene generally decreased acid phosphatase, urease, dehydrogenase, and catalase activities. Therefore, when graphene reaches a certain content level in this soil, it may also affect nitrogen and phosphorus cycling.

Effects of carbon nanotubes on biodegradation of pollutants: Positive or negative?

Recently, a large quantity of carbon nanotubes (CNTs) enters the environment due to the increasing production and applications. More and more researches are focused on the fate and possible ecological risks of CNTs. Some literatures summarized the effects of CNTs on the chemical behavior and fate of pollutants. However, little reviewed the effects of CNTs on the biodegradation of pollutants. In general, the effects of CNTs on the biodegradation of pollutants and the related mechanisms were summarized in this review. CNTs have positive or negative effects on the biodegradation of contaminants by affecting the functional microorganisms, enzymes and the bioavailability of pollutants. CNTs may affect the microbial growth, activity, biomass, community composition, diversity and the activity of enzymes. The decrease of the bioavailability of pollutants due to the sorption on CNTs also causes the reduction of the biodegradation of contaminants. In addition, the roles of CNTs are controlled by multiple mechanisms, which are divided into three aspects i.e., properties of CNTs, environment condition, and microorganisms themself. The better understanding of the fate of CNTs and their impacts on the biochemical process in the environment is conducive to determine the release of CNTs into the environment.

Elucidation of the mechanisms into effects of organic acids on soil fertility, cadmium speciation and ecotoxicity in contaminated soil

The remediation effect of organic acids in heavy metal contaminated soil was widely studied. However, the comprehensive evaluation of organic acids on micro-ecological environment in heavy metal contaminated soil was less known. Herein, this experiment was conducted to investigate the impact of malic acid, citric acid and oxalic acid on soil fertility, cadmium (Cd) speciation and ecotoxicity in contaminated soil. Especially, to evaluate the ecotoxicity of Cd, high-throughput sequencing was used to investigate the soil bacterial community structure and diversity after incubation with organic acids. The results showed that obvious changes in soil pH were not observed. Whereas, the contents of available phosphorus (Olsen-P) and alkali hydrolysable nitrogen (Alkeline-N) evidently increased with a significant difference. Furthermore, compared to control, the proportion of acetic acid-extractable Cd increased by 3.06-6.63%, 6.11-9.43% and 1.91-6.22% respectively in the groups amended with malic acid, citric acid and oxalic acid, which indicated that citric acid did better in improving the availability of Cd than malic acid and oxalic acid. In terms of biological properties, citric acid did best in bacteria count increase, enzyme activities and bacterial community structure improvement. Accordingly, these results provided a better understanding for the influence of organic acids on the micro-ecological environment in Cd contaminated soil, based on physicochemical and biological analysis.

Effects of carbon nanotubes and derivatives of graphene oxide on soil bacterial diversity

Carbon nanotubes (CNTs), reduced graphene oxide (rGO) and ammonia-functionalized graphene oxide (aGO), are nanomaterials with useful properties, such as high tensile strength, elasticity and thermal conductivity. However, following their use, their release into the environment is inevitable. While CNTs have been shown to influence soil bacterial diversity, albeit only at concentrations far exceeding predicted rates of release, the effects of rGO have only been examined using pure bacterial cultures, and those of aGO are unknown. Here, we investigated the effects of CNTs, rGO and aGO, at three time points (7, 14 and 30days), and over a range of concentrations (1ng, 1μg and 1mgkg dry soil^-1), on soil bacterial diversity using 16S rRNA amplicon sequencing. Graphite was included to facilitate comparisons with a similar and naturally occurring carbon material, while the inclusion of GO allowed the effects of GO modification to be isolated. Bacterial community composition, but not alpha diversity, was altered by all treatments except the low GO, low rGO and high aGO treatments on day 14 only. In all cases, the nanomaterials led to shifts in community composition that were of similar magnitude to those induced by graphite and GO, albeit with differences in the taxa affected. Our study highlights that carbon nanomaterials can induce changes in soil bacterial diversity, even at doses that are environmentally realistic.

Long-term impacts of carboxyl functionalized multi-walled carbon nanotubes on the performance, microbial enzymatic activity and microbial community of sequencing batch reactor

The performance, microbial community and enzymatic activity of sequencing batch reactors (SBRs) were evaluated under long-term exposure of 0, 10 and 30 mg/L carboxyl functionalized multi-walled carbon nanotubes (MWCNTs-COOH). The presence of 10 mg/L MWCNTs-COOH displayed no adverse impacts on the COD and NH₄⁺-N removal of SBR, whereas 30 mg/L MWCNTs-COOH declined the COD and NH₄⁺-N removal. MWCNTs-COOH inhibited the denitrifying process and led to the accumulation of effluent NO₂^--N concentration. The inhibition of MWCNTs-COOH on the oxygen utilization rate, nitrogen removal rate and enzymatic activity of activated sludge gradually enhanced with the increase of operating time and influent MWCNTs-COOH concentration. MWCNTs-COOH stimulated more reactive oxygen species production and lactate dehydrogenase release, which might affect the microbial physiological functions and morphology. The microbial diversity and richness was declined evidently after long-term exposure of MWCNTs-COOH. The relative abundance of nitrifying and denitrifying bacteria showed some changes under MWCNTs-COOH stress.

A comparative analysis of ball-milled biochar, graphene oxide, and multi-walled carbon nanotubes with respect to toxicity induction in Streptomyces

Ball-milled biochar has recently attracted a lot of attention due to the simplicity of its preparation and low cost. However, it is unknown if the biochar is environmentally safe. Here, the toxic effect of ball-milled biochar on Streptomyces was compared to that of pristine biochar and two other carbon nanomaterials of different shapes-graphene oxide and multi-walled carbon nanotubes. The effect of these different materials on antibiotic production was characterized. The results showed that even at concentrations of up to 10 mg/L, pristine biochar had a negligible effect on toxicity and antibiotic production in Streptomyces. However, after ball milling, the physical and chemical properties of biochar changed dramatically. Cells were severely damaged, and there was a significant increase in antibiotic production after the addition of ball-milled biochar. Exposure to 10 mg/L of ball-milled biochar caused massive cell disruption; the survival rate of Streptomyces coelicolor M145 cells was only 68.2% as compared to 90% after treatment with 10 mg/L graphene oxide and multi-walled carbon nanotubes. The secretion of the antibiotics- the red intracellular pigment undecylprodigiosin (RED) and blue diffusible pigment actinorhodin (ACT) was enhanced with the highest level in treatment with ball milled biochar, as compared to that with the other two carbon nanomaterials. This effect can be attributed to increased expression of pathway-specific regulatory genes redD, redZ and actⅡ-ORF4. Ball-milled biochar can be developed as an effective additive to increase antibiotic yield. However, we should restrict the large-scale use of ball-milled biochar before fully understanding its impact on the environment and human health.

Effects of Various Carbon Nanotubes on Soil Bacterial Community Composition and Structure

Carbon nanotubes (CNTs) have huge industrial potential, and their environmental impacts need to be evaluated. Knowledge of CNT impacts on soil microbial communities is still limited. To address this knowledge gap, we systematically examined dynamic effects of one type of single-walled carbon nanotubes (SWs) and three multiwalled carbon nanotubes (MWs) with different outer diameters on the soil bacterial community in an agricultural soil over 56 days. The results showed that SWs differently affected soil bacterial abundance, diversity, and composition as compared to MWs. The differences could have resulted from the materials' distinct physical structure and surface composition, which in turn affected their bioavailability in soil. For certain treatments, soil bacterial diversity and the relative abundance of certain predominant phyla were correlated with their exposure duration. However, many phyla recovered to their initial relative abundance within 56 days, reflecting resilience of the soil bacterial community in response to CNT-induced disturbance. Further analysis at the genus level showed differential tolerance to MWs, as well as size- and dose-dependent tolerance among bacterial genera. Predictive functional profiling showed that while CNTs initially caused fluctuations in microbial community function, community function largely converged across all treatments by the end of the 56 day exposure.

Understanding the influence of carbon nanomaterials on microbial communities

Carbon nanomaterials (CNMs) are widely used because of their unique advantages in recent years. At the same time, the influence of CNMs on the environment is becoming increasingly prominent. This review mainly introduces the research progress in the effects of fullerenes, multi-walled carbon nanotubes (MWCNTs), single-walled carbon nanotubes (SWCNTs) and graphene on microorganisms and their toxicity mechanisms. On this basis, we have analyzed beneficial and adverse effects of fullerenes, graphene, MWCNTs and SWCNTs to microorganisms, and discussed the similarities of the toxicity mechanisms of different CNMs on microorganisms. This review helps provide ideas on how to protect microorganisms from the impacts of carbon nanomaterials, and it will be conductive to providing a strong theoretical basis for better application of carbon nanomaterials.

Environmental fate of multiwalled carbon nanotubes and graphene oxide across different aquatic ecosystems

The industrial use and widespread application of carbon-based nanomaterials have caused a rapid increase in their production over the last decades. However, toxicity of these materials is not fully known and is still being investigated for potential human and ecological health risks. Detecting carbon-based nanomaterials in the environment using current analytical methods is problematic, making environmental fate and transport modeling a practical way to estimate environmental concentrations and assess potential ecological risks. The Water Quality Analysis Simulation Program 8 (WASP8) is a dynamic, spatially resolved fate and transport model for simulating exposure concentrations in surface waters and sediments. Recently, WASP has been updated to incorporate processes for simulating the fate and transport of nanomaterials including heteroaggregation and phototransformation. This study examines the fate and transport of multiwalled carbon nanotubes (MWCNT), graphene oxide (GO) and reduced graphene oxide (rGO) in four aquatic ecosystems in the southeastern United States. Sites include a seepage lake, a coastal plains river, a piedmont river and an unstratified, wetland lake. A hypothetical 50-year release is simulated for each site-nanomaterial pair to analyze nanomaterial distribution between the water column and sediments. For all nanomaterials, 99% of the mass loaded moves though systems of high and low residence times without being heteroaggregated and deposited in the sediments. However, significant accumulation in the sediments does occur over longer periods of time. Results show that GO and rGO had the highest mass fraction in the water column of all four sites. MWCNT were found predominantly in the sediments of the piedmont river and seepage lake but were almost entirely contained in the water column of the coastal plains river and wetland lake. Simulated recovery periods following the release estimate 37+ years for lakes and 1-4 years for rivers to reduce sediment nanomaterial concentrations by 50% suggesting that carbon-based nanomaterials have the potential for long-term ecological effects.

Stabilizing Effects on a Cd Polluted Coastal Wetland Soil using Calcium Polysulphide

In this study, different dosages of calcium polysulphide (CaS_x) were used as an amendment to investigate effects on the immobilizing of Cd in a wetland soil by pot experiment. In addition to chemical analysis (pH and bioavailable Cd concentration), changes in soil enzyme activities, microbial carbon utilization capacity, metabolic and community diversity were examined to assess dynamic impacts on soil environmental quality and toxicity of Cd resulting from ameliorant dosing. Soil pH increased immediately upon CaS_x amendment compared to the unamended control (CK), and then declined slowly to a level lower than CK. Diethylenetriamine pentaacetic acid (DTPA) extractable Cd concentration was determined to characterize the bioavailability of Cd in the soil. The CaS_x dose-dependent effect observed that with increasing CaS_x dosage, the immobilizing efficiency decreased. Soil urease and catalase activity assays and Biolog EcoPlate assay indicated that early stage addition of CaS_x significantly inhibited soil microbial activities. However, mid and late stage time periods showed the inhibition effects were alleviated, and the microbial activities could be recovered in 1% and 2% CaS_x treatments. Moreover, with increasing incubation time, microbial community diversity and richness were significantly recovered in 1% and 2% CaS_x treatments compared to the CK. No considerable changes were observed in the 5% CaS_x treatment. Conclusively, the 1% CaS_x amendment was an efficient and safe dosage for the stabilization of Cd contaminated wetland soil. This study contributes to the development of in situ remediation ameliorants and technologies for heavy metal polluted wetland soils.

Recreational Use of Spa Thermal Waters: Criticisms and Perspectives for Innovative Treatments

Natural spa springs are diffused all over the world and their use in pools is known since ancient times. This review underlines the cultural and social spa context focusing on hygiene issues, public health guidelines and emerging concerns regarding water management in wellness or recreational settings. The question of the "untouchability" of therapeutic natural waters and their incompatibility with traditional disinfection processes is addressed considering the demand for effective treatments that would respect the natural properties. Available strategies and innovative treatments are reviewed, highlighting potentials and limits for a sustainable management. Alternative approaches comprise nanotechnologies, photocatalysis systems, advanced filtration. State of the art and promising perspectives are reported considering the chemical-physical component and the biological natural complexity of the spa water microbiota.

Carbonaceous Nanomaterials Have Higher Effects on Soybean Rhizosphere Prokaryotic Communities During the Reproductive Growth Phase than During Vegetative Growth

Carbonaceous nanomaterials (CNMs) can affect agricultural soil prokaryotic communities, but how the effects vary with the crop growth stage is unknown. To investigate this, soybean plants were cultivated in soils amended with 0, 0.1, 100, or 1000 mg kg-1 of carbon black, multiwalled carbon nanotubes (MWCNTs), or graphene. Soil prokaryotic communities were analyzed by Illumina sequencing at day 0 and at the soybean vegetative and reproductive stages. The sequencing data were functionally annotated using the functional annotation of prokaryotic taxa (FAPROTAX) database. The prokaryotic communities were unaffected at day 0 and were altered at the plant vegetative stage only by 0.1 mg kg-1 MWCNTs. However, at the reproductive stage, when pods were filling, most treatments (except 1000 mg kg-1 MWCNTs) altered the prokaryotic community composition, including functional groups associated with C, N, and S cycling. The lower doses of CNMs, which were previously shown to be less agglomerated and thus more bioavailable in soil relative to the higher doses, were more effective toward both overall communities and individual functional groups. Taken together, prokaryotic communities in the soybean rhizosphere can be significantly phylogenetically and functionally altered in response to bioavailable CNMs, especially when soybean plants are actively directing resources to seed production.

Multi-walled carbon nanotubes applied through seed-priming influence early germination, root hair, growth and yield of bread wheat (Triticum aestivum L.)

BACKGROUND

Reports of multi-walled carbon nanotubes (MWCNTs) incorporated into plants have indicated better yield and productivity, yet the phenomena need in-depth understanding especially when agricultural crops are tested. We primed wheat seeds with MWCNTs to understand the effects on germination, growth, anatomy, physiology and yield.

RESULT

This study, carried out in field conditions, is a step forward over the previous reports. Early germination, excessive root hair, denser stomata and larger root length result in faster growth and higher yield of wheat plants. Denser root hair facilitated the uptake of both water and essential minerals such as phosphorus (P) and potassium (K), which boosted the crop yield by significantly improving grain yield per plant from 1.53 to 2.5 g, a 63% increase. Increase in cell elongation by 80% was recorded, while xylem and phloem sizes dilated to almost 83% and 85% of control, thus enhancing their capacity to conduct water and nutrients.

CONCLUSION

Augmented growth of MWCNT-primed wheat, enhancement in grain number, biomass, stomatal density, xylem-phloem size, epidermal cells, and water uptake is observed while finding no DNA damage. This opens up an entirely new aspect to using cost-effective nanomaterials (the MWCNTs were produced in-house) for enhancing the performance of crop plants. © 2017 Society of Chemical Industry.

Attenuation of bacterial cytotoxicity of carbon nanotubes by riverine suspended solids in water

The impact of solid particles on ecotoxicity of nanomaterials in water environments is poorly understood. This study investigated the effect of natural riverine suspended solids (SPS) on the cytotoxicity of single-walled carbon nanotubes (SWCNTs) towards a bacterium, Ochrobactrum sp. in water. Compared with SWCNT suspension without SPS, the presence of SPS at different concentrations ranging from 20 to 400 mg L^-1 markedly increased the survival rates of bacteria exposed to 50 mg L^-1 SWCNTs and bacterial survival rates increased with SPS concentrations by a power law. Sedimentation experiments and field emission scanning electron microscopy revealed the occurrence of heteroaggregation between SWCNTs and SPS, probably responsible for the reduced SWCNT toxicity. Furthermore, the extended Derjaguin-Landau-Verwey-Overbeek (ExDLVO) calculation showed the mitigated toxicity might also result from the decreased SWCNT-bacterium interaction energy with the increased SPS concentrations and the stronger SPS-SWCNT interaction than the SWCNT-bacterium interaction. This work provides new insights into our understanding of environmental hazards of engineered nanomaterials in aquatic systems.

Response of methane production via propionate oxidation to carboxylated multiwalled carbon nanotubes in paddy soil enrichments

Carboxylated multiwalled carbon nanotubes (MWCNTs-COOH) have become a growing concern in terms of their fate and toxicity in aqueous environments. Methane (CH₄) is a major product of organic matter degradation in waterlogged environments. In this study, we determined the effect of MWCNTs-COOH on the production of CH₄ from propionate oxidation in paddy soil enrichments. The results showed that the methanogenesis from propionate degradation was accelerated in the presence of MWCNTs-COOH. In addition, the rates of CH₄ production and propionate degradation increased with increasing concentrations of MWCNTs-COOH. Scanning electron microscopy (SEM) observations showed that the cells were intact and maintained their structure in the presence of MWCNTs-COOH. In addition, SEM and fluorescence in situ hybridization (FISH) images revealed that the cells were in direct contact with the MWCNTs and formed cell-MWCNTs aggregates that contained both bacteria and archaea. On the other hand, nontoxic magnetite nanoparticles (Fe₃O₄) had similar effects on the CH₄ production and cell integrity as the MWCNTs-COOH. Compared with no nanomaterial addition, the relative abundances of Geobacter and Methanosarcina species increased in the presence of MWCNTs-COOH. This study suggests that MWCNTs-COOH exerted positive rather than cytotoxic effects on the syntrophic oxidation of propionate in paddy soil enrichments and affected the bacterial and archaeal community structure at the test concentrations. These findings provide novel insight into the consequences of nanomaterial release into anoxic natural environments.

Designer carbon nanotubes for contaminant removal in water and wastewater: A critical review

The search for effective materials for environmental cleanup is a scientific and technological issue of paramount importance. Among various materials, carbon nanotubes (CNTs) possess unique physicochemical, electrical, and mechanical properties that make them suitable for potential applications as environmental adsorbents, sensors, membranes, and catalysts. Depending on the intended application and the chemical nature of the target contaminants, CNTs can be designed through specific functionalization or modification processes. Designer CNTs can remarkably enhance contaminant removal efficiency and facilitate nanomaterial recovery and regeneration. An increasing number of CNT-based materials have been used to treat diverse organic, inorganic, and biological contaminants. These success stories demonstrate their strong potential in practical applications, including wastewater purification and desalination. However, CNT-based technologies have not been broadly accepted for commercial use due to their prohibitive cost and the complex interactions of CNTs with other abiotic and biotic environmental components. This paper presents a critical review of the existing literature on the interaction of various contaminants with CNTs in water and soil environments. The preparation methods of various designer CNTs (surface functionalized and/or modified) and the functional relationships between their physicochemical characteristics and environmental uses are discussed. This review will also help to identify the research gaps that must be addressed for enhancing the commercial acceptance of CNTs in the environmental remediation industry.

Carbon nanomaterials alter plant physiology and soil bacterial community composition in a rice-soil-bacterial ecosystem

The aim of this study was to compare the toxicity effects of carbon nanomaterials (CNMs), namely fullerene (C₆₀), reduced graphene oxide (rGO) and multi-walled carbon nanotubes (MWCNTs), on a mini-ecosystem of rice grown in a loamy potted soil. We measured plant physiological and biochemical parameters and examined bacterial community composition in the CNMs-treated plant-soil system. After 30 days of exposure, all the three CNMs negatively affected the shoot height and root length of rice, significantly decreased root cortical cells diameter and resulted in shrinkage and deformation of cells, regardless of exposure doses (50 or 500 mg/kg). Additionally, at the high exposure dose of CNM, the concentrations of four phytohormones, including auxin, indoleacetic acid, brassinosteroid and gibberellin acid 4 in rice roots significantly increased as compared to the control. At the high exposure dose of MWCNTs and C₆₀, activities of the antioxidant enzymes superoxide dismutase (SOD) and peroxidase (POD) in roots increased significantly. High-throughput sequencing showed that three typical CNMs had little effect on shifting the predominant soil bacterial species, but the presence of CNMs significantly altered the composition of the bacterial community. Our results indicate that different CNMs indeed resulted in environmental toxicity to rice and soil bacterial community in the rhizosphere and suggest that CNMs themselves and their incorporated products should be reasonably used to control their release/discharge into the environment to prevent their toxic effects on living organisms and the potential risks to food safety.

Contrasting effects of engineered carbon nanotubes on plants: a review

Rapid surge of interest for carbon nanotube (CNT) in the last decade has made it an imperative member of nanomaterial family. Because of the distinctive physicochemical properties, CNTs are widely used in a number of scientific applications including plant sciences. This review mainly describes the role of CNT in plant sciences. Contradictory effects of CNT on plants physiology are reported. CNT can act as plant growth inducer causing enhanced plant dry biomass and root/shoot lengths. At the same time, CNT can cause negative effects on plants by forming reactive oxygen species in plant tissues, consequently leading to cell death. Enhanced seed germination with CNT is related to the water uptake process. CNT can be positioned as micro-tubes inside the plant body to enhance the water uptake efficiency. Due to its ability to act as a slow-release fertilizer and plant growth promoter, CNT is transpiring as a novel nano-carbon fertilizer in the field of agricultural sciences. On the other hand, accumulation of CNT in soil can cause deleterious effects on soil microbial diversity, composition and population. It can further modify the balance between plant-toxic metals in soil, thereby enhancing the translocation of heavy metal(loids) into the plant system. The research gaps that need careful attention have been identified in this review.

New insight into the environmental impact of two imidazolium ionic liquids. Effects on seed germination and soil microbial activity

The next generation of ionic liquids must be synthetized taking into account structures that guarantee the suitable properties for a defined application as well as ecological data. Thus, searching of the right methodologies to know, quickly and efficiently, the ecological effects of these compounds is a preliminary task. The effects of two imidazolium based ionic liquids with different anions, 1-butyl-3-methylimidazolium tetrafluoroborate, [C₄C₁Im][BF₄], and 1-propyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [C₃C₁Im][NTf₂], on seedling emergence of six tree species and on the microbial behaviour of two soils were determined in this work. Results showed that the highest doses of both ionic liquids caused the total inhibition of germination for almost all the species studied and that the seeds are more sensitive to the presence of these compounds than soil microbial activity. Nevertheless, signals of stress and death are observed from the results of heat released by microorganisms after the addition of the highest doses of both ionic liquids. The novelty of this work resides in the enlargement of knowledge of toxicity of ILs on complex organisms such as arboreal species and microbial activity of soils studied for the first time through a microcalorimetric technique.