A green synthesis of copper nanoparticles using native cyclodextrins as stabilizing agents

Critical Evaluation of Combined Cu and Fe3O4 Nanodots with Gum Arabic Nano-Hybrids Using in-vitro Model: Flow Cytometry and Cell Viability Studies

Background

Previous studies on synthesis and cytotoxicity effect of copper (Cu) and magnetite (Fe3O4) nanodots against kidney and lung cancer cells Lines.

Purpose

Investigation of the effects of Cu and Fe3O4 nanodots on the reduction in viability of lung cancer (A549) and human embryonic kidney (HEK239T) cells lines.

Methods

Cu and Fe3O4 nanodots/Gum Arabic (GA) hybrids were chemically synthesized, characterized, and assessed by MTT and flow cytometry for their cytotoxicity against A549 and HEK239T cells lines.

Results

Novel hybrids of Cu and Fe3O4 nanodots were effectively synthesized by chemical deposition method in combination with GA stabilizing agent. The stabilized Cu and Fe3O4 nanodots by GA have median particle size of 4.7 nm and 7 nm respectively. Furthermore, the biological activities of Cu nanodots/ GA hybrids showed a strong reduction in viability for both A549 and HEK239T cells at 50 and 100 ng/µL, owing to their small size and high surface-area-to-volume ratio compared to Fe3O4 nanoparticles. Pre-apoptosis effect of the Cu nanodots/ GA hybrid on the treated A549 cells were 40% for 0.1 ng/µL, 91.4% for 1 ng/µL, 88% for 50 ng/ µL, and 87.7% for 100 ng/µL. However, in the treated human embryonic kidney (HEK293T) cells, the pre-apoptosis was found under different concentrations conditions of 89.9% for 0.1 ng/µL, 94.2% for 1 ng/µL, 76.2% for 50 ng/µL and 70.5% for 100 ng/µL. After treatment of both A549 and HEK293T cells with 100 ng/µL of Cu nanodots/GA hybrid, many cell deaths and reformed nanoparticles crystals were observed.

Conclusion

Cu nanodots/GA hybrid strongly reduce the viability of both A549 and HEK239T cells at 50 and 100 ng/µL. However, Fe3O4 nanodots/GA hybrid did not show any significant effect.

Synthesis of copper nanoparticles by a sonication-mediated method using Malpighia glabra fruit extract and their applications

This study introduces an environmentally friendly technique for copper nanoparticle synthesis utilizing Malpighia glabra fruit extract under the sonication treatment. The synthesis process and phenol red removal were optimized by a central composite full and response surface design. Highly pure and spherical-shaped copper nanoparticles with an average size of 22.5 nm were formed using 7.4 mL of Malpighia glabra fruit extract and 21.9 mM (AcO)2Cu. Additionally, the extract-mediated nanoparticles opposed the negative charges with a zeta potential of -11.8 mV and high stability of 30 days storage time. The sonication-assisted nanoparticles exhibited the highest inhibition against Gram-positive bacteria (Bacillus subtilis and Staphylococcus aureus), MCF7 human breast cancer cells, and Fusarium solani with 50% inhibition concentrations reaching 12, 0.82, and 80 ppm, respectively. Additionally, the green-synthesized nanomaterials functioned as an effective catalyst to remove phenol red. A conversion of 97% after a 540 seconds reaction was determined on 10 ppm phenol red with the presence of 21.5 ppm copper nanoparticles and 51.8 mM NaBH4. This research highlights the potential of Malpighia glabra fruit extract in the sustainable production of copper nanoparticles, with promising applications in biomedicine, agriculture, and environmental remediation.

Electro-Fenton degradation of pefloxacin using MOFs derived Cu, N co-doped carbon as a nanocomposite catalyst

Electro-Fenton (EF) can in-situ produce H2O2 and effectively activate H2O2 to generate powerful reactive species for the destruction of contaminants under acidic conditions, however, the production of iron-containing sludge and requirement of low working pH significantly hinder its practical application. Herein, a novel Cu, N co-doped carbon (Cu-N@C) with metal organic framework (MOF) as a precursor was constructed and adopted for the elimination of pefloxacin (PEF) in the heterogeneous electro-Fenton (HEF) process. PEF could be almost completely removed within 1 h and total organic carbon (TOC) removal efficiency was 48.57% within 6 h. Meanwhile, Cu-N@C had good repeatability and environmental adaptability, it can still maintain excellent catalytic performance after 10 cycles, and it exhibited satisfactory remediation performance in simulated water matrix. In addition, the HEF process catalyzed by Cu-N@C also showed satisfactory degradation effect on other organic pollutants including atrazine, methylene blue, and chlorotetracycline. Under the action of impressed current, the HEF system could generate H2O2 in-situ, and the active species could be generated in the redox cycle of Cu0/Cu1+/Cu2+. Electron paramagnetic resonance and quenching experiments confirmed that •OH was the dominant active species in the degradation of organic compounds. The degradation process of PEF was studied by mass spectrometry analysis of intermediate products. This study provided a simple method to prepare MOF-based electrocatalyst, which exhibits promising application potential for treatment wastewater.

From agro-food waste to nanoparticles: green synthesis of copper nanoparticles with lignin peroxidase enzyme produced by Anoxybacillus rupiensis using peanut shells

This study presents a novel approach for the eco-friendly green synthesis of copper nanoparticles (Cu NPs) using enzymatic mediation which is an environmentally benign alternative to conventional methods, offering control over particle size and shape. Anoxybacillus rupiensis BS1 thermophilic bacterium was isolated from Erzurum's Pasinler hot spring and lignin peroxidase enzyme production conditions (incubation time 96 h, 40 g/L shell amount, pH 8.5, 150 rpm, and 60 °C temperature) were used in the production of peroxidase enzyme using peanut waste which has been optimized. The characterization of the synthesized Cu NPs was performed using various analytical techniques, including UV-vis spectroscopy, Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM), confirming the successful production of stable and well-defined nanoparticles. Furthermore, the biological activities of the synthesized Cu NPs were explored, revealing their potential for antimicrobial applications. The antibacterial efficacy of the Cu NPs against some pathogens such as Escherichia coli, Klebsiella pneumoniae, Staphylococcus aureus, Streptococcus pyogenes, and Bacillus cereus was examined. It was determined that Cu NPs were effective on all pathogens and had the highest effectiveness against the S. pyogenes pathogen (19.0 mm). This study not only presents an innovative and sustainable approach for the synthesis of Cu NPs but also highlights the multifaceted biological activities of these nanoparticles, opening avenues for diverse applications in the fields of medicine, agriculture, and environmental remediation. The utilization of peanut shell wastes as a substrate for enzyme production adds value to agricultural by-products, contributing to the development of a circular and sustainable economy.

Alkaline protease based hydrothermal synthesis of novel Pd/CuO/ZnO nanocomposite: A new entry into photocatalytic and biomedical applications

Here, we reported the process for the production of Pd/CuO/ZnO nanocomposite utilizing alkaline protease from Phalaris minor seed extract, which is a unique, effective biogenic approach. Alkaline protease performed a crucial part in the reduction, capping and stabilization of Pd/CuO/ZnO nanocomposites. A series of physicochemical techniques were used to inquire the formation, size, shape and crystalline nature of Pd/CuO/ZnO nanocomposites. The notable performance of the synthesized nanocomposite as a photocatalyst and an antibacterial disinfectant was astonishing. The Pd/CuO/ZnO nanocrystals showed considerable photocatalytic activity by eliminating 99 % of the methylene blue (MB) in <30 min of exposure. After three test cycles, the nanocatalyst demonstrated exceptional reliability as a photocatalyst. The nanocomposite was also discovered to be an effective antibacterial agent, with zones of inhibitory activity for Staphylococcus aureus and Escherichia coli bacteria of 30(±0.2), 27(±0.3), 22(±0.2), and 21(±0.3) mm, respectively, in both light and dark conditions. Moreover, the Pd/CuO/ZnO nanocomposites showed strong antioxidant activity by efficiently scavenging 2,2-diphenyl-1-picrylhydrazyl (DPPH) radicals. The photocatalytic, antibacterial and antioxidative performance of Pd, CuO, ZnO, and CuO/ZnO were also assessed for the sake of comparison. This work shows that biogenic nanocomposites may be employed as a feasible alternative photocatalyst for the decomposition of dyes in waste water as well as a sustainable antibacterial agent.

Novel mixed heterovalent (Mo/Co)Ox-zerovalent Cu system as bi-functional electrocatalyst for overall water splitting

A novel hybrid ternary metallic electrocatalyst of amorphous Mo/Co oxides and crystallized Cu metal was deposited over Ni foam using a one-pot, simple, and scalable solvothermal technique. The chemical structure of the prepared ternary electrocatalyst was systematically characterized and confirmed via XRD, FTIR, EDS, and XPS analysis techniques. FESEM images of (Mo/Co)Ox-Cu@NF display the formation of 3D hierarchical structure with a particle size range of 3-5 µm. The developed (Mo/Co)Ox-Cu@NF ternary electrocatalyst exhibits the maximum activity with 188 mV and 410 mV overpotentials at 50 mA cm-2 for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Electrochemical impedance spectroscopy (EIS) results for the (Mo/Co)Ox-Cu@NF sample demonstrate the minimum charge transfer resistance (Rct) and maximum constant phase element (CPE) values. A two-electrode cell based on the ternary electrocatalyst just needs a voltage of about 1.86 V at 50 mA cm-2 for overall water splitting (OWS). The electrocatalyst shows satisfactory durability during the OWS for 24 h at 10 mA cm-2 with an increase of only 33 mV in the cell potential.

Effects of plant-based copper nanoparticles on the elimination of ciprofloxacin

Ciprofloxacin (CIP) is frequently detected in the environment and causes the emergence of drug-resistant bacteria. High levels of CIP in the environment are also harmful to humans and animals. Therefore, effective elimination of CIP is required. In this study, plant-based copper nanoparticles (CuNPs) have been fabricated for the purpose of eliminating CIP. Aqueous extracts of 6 plants were compared for their phytochemicals and reducing activity. Among all the extracts, Garcinia mangostana extract (GM) was the most potent with the highest total phenolic compounds, flavonoids, tannins, terpenoids, and reducing activity. CuNPs synthesized using GM (GM-CuNPs) were characterized using UV-VIS spectroscopy and dynamic light scattering. The results showed that the maximum absorption of GM-CuNPs was at 340 nm. The average size of GM-CuNPs is in the nanoscale range of 159.2 ± 61 nm, with a narrow size distribution and a negative zeta potential of - 4.13 ± 6.97 mV. The stability of GM-CuNPs is not solely due to their zeta potential but also phytochemicals in the extract. GM-CuNPs at 25 mM showed the highest efficiency of 95% in removing CIP from aqueous medium pH 6-7 at 25-35°C within 20 min. The results indicated that the electrostatic attraction between the negative charge of GM-CuNPs and the positive charge of CIP controlled the drug adsorption on the nanoparticles. In conclusion, the developed GM-CuNPs have excellent CIP removal efficiency. These synthesized GM-CuNPs are expected to be environmentally friendly for the removal of antibiotics and other drugs.

Green synthesis, characterization, antibacterial, and antifungal activity of copper oxide nanoparticles derived from Morinda citrifolia leaf extract

The green methodologies of nanoparticles with plant extracts have received an increase of interest. Copper oxide nanoparticles (CuO NPs) have been utilized in a many of applications in the last few decades. The current study presents the synthesis of CuO NPs with aqueous extract of Morinda citrifolia as a stabilizing agent. The leaf extract of Morinda citrifolia was mixed with a solution of copper sulphate (CuSO4·5H2O) and sodium hydroxide as a catalyst. UV-visible spectroscopy, FTIR, XRD, SEM, TEM, and EDAX analysis were performed to study the synthesized CuO NPs. Particle size distribution of the synthesized CuO NPs have been measured with dynamic light scattering. The CuO NPs synthesized were highly stable, sphere-like, and have size of particles from 20 to 50 nm. Furthermore, as-formed CuO NPs shown strong antibacterial activity against the Gram-positive bacteria (Bacillus subtilis, and Staphylococcus aureus), and Gram-negative bacteria (Escherichia coli). CuO NPs revealed a similar trend was analysed for antifungal activity. The zone of inhibition for the fungi evaluated for Aspergillus flavus (13.0 ± 1.1), Aspergillus niger (14.3 ± 0.7), and Penicillium frequentans (16.8 ± 1.4). According to the results of this investigation, green synthesized CuO NPs with Morinda citrifolia leaf extract may be used in biomedicine as a replacement agent for biological applications.

Green synthetized Cu-Oxide Nanoparticles: Properties and applications for enhancing healing of wounds infected with Staphylococcus aureus

Treating wound infections is a challenging concern in various clinical settings in Egypt, especially in the increasing global problem of resistance to antimicrobials. Here, we aimed to fabricate CuO NPs via green synthesis using aqueous Yucca gigantea extract. Then, the effect of green synthesized CuO NPs on Staphylococcus aureus clinical isolates has been studied in vivo and in vitro. The aqueous extract of Yucca gigantea has been employed in our study as a scale-up approach to safely, affordably, sustainably, and practically fabricate copper oxide nanoparticles (CuO NPs). Fourier transforms infrared (FT-IR), X-ray Diffraction (XRD), and UV-vis spectroscopy were utilized in vitro to describe the bonding features of CuO NPs.Scanning Electron microscopy (SEM), Transmission electron microscopy (TEM), Energy dispersive X-ray (EDX), and dynamic light scattering (DLS) were used to detect the morphological and elemental composition of the resulting CuO NPs. The fabrication of CuO NPs was confirmed by the IR spectral band at 515 cm-1, ensuring the metal-oxygen bondCu-O with two strong bands at 229 and 305 nm. SEM and TEM show CuO NPs with a size range from 30 to 50 nm. Cu and O comprised most of the particles produced through green synthesis, with weight percentages of 57.82 and 42.18 %, respectively. CuO NPs were observed to have a Zeta-potential value of -15.7 mV, demonstrating their great stability. CuO NPs revealed antibacterial potential toward the tested isolates with minimum inhibitory concentration values of 128 to 512 µg/mL. CuO NPs had antibiofilm potential by crystal violet assay, downregulating the expression of icaA and icaD genes in 23.07 % and 19.32 of the S. aureus isolates. The wound-healing potential of CuO NPs was investigated in vivo. It significantly decreased the bacterial burden and increased wound healing percentage compared to the positive control group. Moreover, CuO NPs caused an upregulation of the genes encoding platelet-derived growth factor (PDGF) and fibronectin in tissue repair. Thus, we can use CuO NPs as a future source for wound healing materials, especially in infected wounds.

Environmental sustainable: Biogenic copper oxide nanoparticles as nano-pesticides for investigating bioactivities against phytopathogens

Endocrine-disrupting chemicals (EDCs) are of interest in human physiopathology and have been extensively studied for their effects on the endocrine system. Research also focuses on the environmental impact of EDCs, including pesticides and engineered nanoparticles, and their toxicity to organisms. Green nanofabrication has surfaced as an environmentally conscious and sustainable approach to manufacture antimicrobial agents that can effectively manage phytopathogens. In this study, we examined the current understanding of the pathogenic activities of Azadirachta indica aqueous formulated green synthesized copper oxide nanoparticles (CuONPs) against phytopathogens. The CuONPs were analyzed and studied using a range of analytical and microscopic techniques, such as UV-visible spectrophotometer, Transmission electron microscope (TEM), Scanning electron microscope (SEM), X-ray diffraction (XRD) and Fourier transformed infrared spectroscopy (FTIR). The XRD spectral results revealed that the particles had a high crystal size, with an average size ranging from 40 to 100 nm. TEM and SEM images were utilized to verify the size and shape of the CuONPs, revealing that they varied between 20 and 80 nm. The existence of potential functional molecules involved in the reduction of the nanoparticles was confirmed by FTIR spectra and UV analysis. Biogenically synthesized CuONPs revealed significantly enhanced antimicrobial activities at 100 mg/L concentration in vitro by the biological method. The synthesized CuONPs at 500 μg/ml had a strong antioxidant activity which was examined through the free radicle scavenging method. Overall results of the green synthesized CuONPs have demonstrated significant synergetic effects in biological activities which can play a crucial impact in plant pathology against numerous phytopathogens.

Durian Shell-Mediated Simple Green Synthesis of Nanocopper against Plant Pathogenic Fungi

The synthesis of fungicides in eco-friendly and cost-effective ways is significantly essential for agriculture. Plant pathogenic fungi cause many ecological and economic issues worldwide, which must be treated with effective fungicides. Here, this study proposes the biosynthesis of fungicides, which combines copper and Cu₂O nanoparticles (Cu/Cu₂O) synthesized using durian shell (DS) extract as a reducing agent in aqueous media. Sugar and polyphenol compounds contained in DS, as the main phytochemicals acting in the reduction procedure, were extracted under different temperatures and duration conditions to obtain the highest yields. We confirmed the extraction process performed at 70 °C for 60 min to be the most effective in extracting sugar (6.1 g/L) and polyphenols (22.7 mg/L). We determined the suitable conditions for Cu/Cu₂O synthesis using a DS extract as a reducing agent for a synthesis time of 90 min, a volume ratio of DR extract/Cu²⁺ of 15:35, an initial pH solution of 10, a synthesis temperature of 70 °C, and a CuSO₄ concentration of 10 mM. The characterization results of as-prepared Cu/Cu₂O NP showed a highly crystalline structure of Cu₂O and Cu with sizes estimated in the range of 40-25 nm and 25-30 nm, respectively. Through in vitro experiments, the antifungal efficacy of Cu/Cu₂O against Corynespora cassiicola and Neoscytalidium dimidiatum was investigated by the inhibition zone. The green-synthesized Cu/Cu₂O nanocomposites, which are potential antifungals against plant pathogens, exhibited excellent antifungal efficacy against both Corynespora cassiicola (MIC = 0.25 g/L, the diameter of the inhibition zone was 22.00 ± 0.52 mm) and Neoscytalidium dimidiatum (MIC = 0.0625 g/L, the diameter of the inhibition zone was 18.00 ± 0.58 mm). Cu/Cu₂O nanocomosites prepared in this study could be a valuable suggestion for the control of plant pathogenic fungi affecting crop species globally.

Biosynthesis of Novel Ag-Cu Bimetallic Nanoparticles from Leaf Extract of Salvia officinalis and Their Antibacterial Activity

Bimetallic nanoparticles exhibit bifunctional or synergistic effects prevailing between two metals with the capabilities of enhanced electronic, catalytic, and optical properties. Green synthetic routes have gained tremendous interest because of the noninvolvement of toxic and harmful chemical reagents in preparation. Therefore, we develop bimetallic Ag-Cu nanoparticles (Ag-Cu NPs) through an eco-friendly and biocompatible preparation method. In this study, Ag-Cu NPs have been synthesized from leaf extracts of the commonly known sage, S. officinalis. The extract has a rich phytochemical composition, including bioreducing polyphenols, flavonoids, and capping/stabilizing agents. An array of well-known spectroscopic and microscopic techniques were used to characterize the as-prepared Ag-Cu bimetallic nanoparticles, including X-ray diffraction (XRD), ultraviolet-visible spectroscopy, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy, transmission electron microscopy, and energy-dispersive X-ray spectroscopy. The size of the Ag-Cu NPs was found to be 50 nm with a spherical shape and an almost uniform distribution. The antibacterial effect was further evaluated using agar well diffusion and disc diffusion assays. Ag-Cu NPs exhibit antibacterial and antibiofilm properties against Gram-positive and Gram-negative bacteria strains. The minimum inhibitory concentration (MIC) of Ag-Cu NPs was between 5 g/mL and 15 g/mL. The Ag-Cu NPs inhibit biofilm formation at 25 g/mL and 50 g/mL. The results of biogenic Ag-Cu NPs provide novel antibacterial activity against Gram-positive and Gram-negative bacteria, as well as antibiofilm activity. Hence, Ag-Cu NPs might serve as a novel antibacterial agent with potential antibacterial and antibiofilm properties.

Plant and Microbial Approaches as Green Methods for the Synthesis of Nanomaterials: Synthesis, Applications, and Future Perspectives

The unique biological and physicochemical characteristics of biogenic (green-synthesized) nanomaterials (NMs) have attracted significant interest in different fields, with applications in the agrochemical, food, medication delivery, cosmetics, cellular imaging, and biomedical industries. To synthesize biogenic nanomaterials, green synthesis techniques use microorganisms, plant extracts, or proteins as bio-capping and bio-reducing agents and their role as bio-nanofactories for material synthesis at the nanoscale size. Green chemistry is environmentally benign, biocompatible, nontoxic, and economically effective. By taking into account the findings from recent investigations, we shed light on the most recent developments in the green synthesis of nanomaterials using different types of microbes and plants. Additionally, we cover different applications of green-synthesized nanomaterials in the food and textile industries, water treatment, and biomedical applications. Furthermore, we discuss the future perspectives of the green synthesis of nanomaterials to advance their production and applications.

Antiamoebic Properties of Ceftriaxone and Zinc-Oxide-Cyclodextrin-Conjugated Ceftriaxone

Acanthamoeba castellanii is a ubiquitous free-living amoeba capable of instigating keratitis and granulomatous amoebic encephalitis in humans. Treatment remains limited and inconsistent. Accordingly, there is a pressing need for novel compounds. Nanotechnology has been gaining attention for enhancing drug delivery and reducing toxicity. Previous work has shown that various antibiotic classes displayed antiamoebic activity. Herein, we employed two antibiotics: ampicillin and ceftriaxone, conjugated with the nanocarrier zinc oxide and β-cyclodextrin, and tested them against A. castellanii via amoebicidal, amoebistatic, encystment, excystment, cytopathogenicity, and cytotoxicity assays at a concentration of 100 μg/mL. Notably, zinc oxide β-cyclodextrin ceftriaxone significantly inhibited A. castellanii growth and cytopathogenicity. Additionally, both zinc oxide β-cyclodextrin ceftriaxone and ceftriaxone markedly inhibited A. castellanii encystment. Furthermore, all the tested compounds displayed negligible cytotoxicity. However, minimal anti-excystment or amoebicidal effects were observed for the compounds. Accordingly, this novel nanoconjugation should be employed in further studies in hope of discovering novel anti-Acanthamoeba compounds.

The Potential of Antibiotics and Nanomaterial Combinations as Therapeutic Strategies in the Management of Multidrug-Resistant Infections: A Review

Antibiotic resistance has become a major public health concern around the world. This is exacerbated by the non-discovery of novel drugs, the development of resistance mechanisms in most of the clinical isolates of bacteria, as well as recurring infections, hindering disease treatment efficacy. In vitro data has shown that antibiotic combinations can be effective when microorganisms are resistant to individual drugs. Recently, advances in the direction of combination therapy for the treatment of multidrug-resistant (MDR) bacterial infections have embraced antibiotic combinations and the use of nanoparticles conjugated with antibiotics. Nanoparticles (NPs) can penetrate the cellular membrane of disease-causing organisms and obstruct essential molecular pathways, showing unique antibacterial mechanisms. Combined with the optimal drugs, NPs have established synergy and may assist in regulating the general threat of emergent bacterial resistance. This review comprises a general overview of antibiotic combinations strategies for the treatment of microbial infections. The potential of antibiotic combinations with NPs as new entrants in the antimicrobial therapy domain is discussed.

Strategies adopted for the preparation of sodium alginate–based nanocomposites and their role as catalytic, antibacterial, and antifungal agents

Alginate extracted from the marine brown algae is a massively utilized biopolymer in multiple fields such as microreactors for the fabrication of metal nanoparticles along with other polymeric and nonpolymeric materials to enhance their mechanical strength. These sodium alginate (Na-Alg)-based fabricated nanocomposites find applications in the field of catalysis and biological treatment as antibacterial/antifungal agent due to the synergistic properties of Na-Alg and fabricated metal nanoparticles (NPs). Na-Alg offers mechanical strength and nanoparticles provide high reactivity due to their small size. Sodium alginate exhibits hydroxyl and carboxylate functional groups that can easily interact with the metal nanoparticles to form composite particles. The research on the preparation of Na-Alg–based nanoparticles and nanoaggregates have been started recently but developed quickly due to their extensive applications in different fields. This review article encircles different methods of preparation of sodium alginate–based metal nanocomposites; analytical techniques reported to monitor the formation of these nanocomposites and used to characterize these nanocomposites as well as applications of these nanocomposites as catalyst, antibacterial, and antifungal agent.

Synthesis and Characterization of Novel Sprayed Ag-Doped Quaternary Cu2MgSnS4 Thin Film for Antibacterial Application

In this work, the effects of silver doping with different Ag/(Ag + Cu) ratios (i.e., 2%, 5% and 10% at.% in the spray solution) on the structural, morphological, optical, electrical and antibacterial properties of Cu₂MgSnS₄ (CMTS) thin film grown by spray pyrolysis have been studied. The X-ray diffraction (XRD) and selected area electron diffraction (SAED) results have shown that the kesterite phase of CMTS thin films has a maximum crystallite size of about 19.60 nm for 5% Ag/(Ag + Cu). Scanning electron microscopy (SEM) images have shown spherical grain shapes. The transmission electron microscopy (TEM) and high-resolution TEM (HRTEM) microscopy observations confirmed the intrinsic reticular planes of CMTS thin film with (112) as a preferred orientation and interplanar spacing value of 3.1 Å. The optical properties showed high absorbance and an absorption coefficient of about 10⁴ cm^-1 in the visible region with an optical band gap energy of 1.51 eV. Impedance analysis spectroscopy demonstrated good electrical properties of the CMTS film obtained using 5% Ag/(Ag + Cu). The antibacterial activity of the undoped and Ag-doped particles of CMTS obtained using 5% Ag/(Ag + Cu) against different strains of pathogenic bacteria was tested using the agar well diffusion method. These results showed a significant antibacterial activity of the Ag-doped CMTS particle, which was much higher than the undoped CMTS particles. These experimental findings may open new practices for the Ag-doped CMTS compound, especially the one obtained using 5% Ag/(Ag + Cu), in antibacterial application.

Low-Temperature Sintering of l-Alanine-Functionalized Metallic Copper Particles Affording Conductive Films with Excellent Oxidative Stability

Here, the alpha amino acid l-alanine is employed as both a capping and stabilizing agent in the aqueous synthesis of submicron-sized metallic copper particles under ambient atmospheric conditions. The reduction of the copper(II) precursor is achieved using l-ascorbic acid (vitamin C) as the reducing agent. The nature of the complex formed between l-alanine and the copper(II) precursor, pH of the medium, temperature, and the relative proportion of capping agent are found to play a significant role in determining the size, shape, and oxidative stability of the resulting particles. The adsorbed l-alanine is shown to act as a barrier imparting excellent thermal stability to capped copper particles, delaying the onset of temperature-induced aerial oxidation. The stability of the particles is complemented by highly favorable sintering conditions, rendering the formation of conductive copper films at significantly lower temperatures (T ≤ 120 °C) compared to alternative preparation methods. The resulting copper films are well-passivated by residual surface l-alanine molecules, promoting long-term stability without hindering the surface chemistry of the copper film as evidenced by the catalytic activity. Contrary to the popular belief that ligands with long carbon chains are best for providing stability, these findings demonstrate that very small ligands can provide highly effective stability to copper without significantly deteriorating its functionality while facilitating low-temperature sintering, which is a key requirement for emerging flexible electronic applications.

Green approaches in synthesising nanomaterials for environmental nanobioremediation: Technological advancements, applications, benefits and challenges

Green synthesis approaches of nanomaterials (NMs) have received considerable attention in recent years as it addresses the sustainability issues posed by conventional synthesis methods. However, recent works of literature do not present the complete picture of biogenic NMs. This paper addresses the previous gaps by providing insights into the stability and toxicity of NMs, critically reviewing the various biological agents and solvents required for synthesis, sheds light on the factors that affect biosynthesis, and outlines the applications of NMs across various sectors. Despite the advantages of green synthesis, current methods face challenges with safe and appropriate solvent selection, process parameters that affect the synthesis process, nanomaterial cytotoxicity, bulk production and NM morphology control, tedious maintenance, and knowledge deficiencies. Consequently, the green synthesis of NMs is largely trapped in the laboratory phase. Nevertheless, the environmental friendliness, biocompatibility, and sensitivities of the resulting NMs have wider applications in biomedical science, environmental remediation, and consumer industries. To the scale-up application of biogenic NMs, future research should be focused on understanding the mechanisms of the synthesis processes, identifying more biological and chemical agents that can be used in synthesis, and developing the practicality of green synthesis at the industrial scale, and optimizing the factors affecting the synthesis process.

Green Synthesis of Copper Nano-Drug and Its Dental Application upon Periodontal Disease-Causing Microorganisms

Dental pathogens lead to chronic diseases like periodontitis, which causes loss of teeth. Here, we examined the plausible antibacterial efficacy of copper nanoparticles (CuNPs) synthesized using Cupressus macrocarpa extract (CME) against periodontitis-causing bacteria. The antimicrobial properties of CME-CuNPs were then assessed against oral microbes (M. luteus. B. subtilis, P. aerioginosa) that cause periodontal disease and were identified using morphological/ biochemical analysis, and 16S-rRNA techniques. The CME-CuNPs were characterized, and accordingly, the peak found at 577 nm using UV-Vis spectrometer showed the formation of stable CME-CuNPs. Also, the results revealed the formation of spherical and oblong monodispersed CME-CuNPs with sizes ranged from 11.3 to 22.4 nm. The FTIR analysis suggested that the CME contains reducing agents that consequently had a role in Cu reduction and CME-CuNP formation. Furthermore, the CME-CuNPs exhibited potent antimicrobial efficacy against different isolates which was superior to the reported values in literature. The antibacterial efficacy of CME-CuNPs on oral bacteria was compared to the synergistic solution of clindamycin with CME-CuNPs. The solution exhibited a superior capacity to prevent bacterial growth. Minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), and fractional inhibitory concentration (FIC) of CME-CuNPs with clindamycin recorded against the selected periodontal disease-causing microorganisms were observed between the range of 2.6-3.6 μg/ml, 4-5 μg/ml and 0.312-0.5, respectively. Finally, the synergistic antimicrobial efficacy exhibited by CME-CuNPs with clindamycin against the tested strains could be useful for the future development of more effective treatments to control dental diseases.

Toward a Greener World-Cyclodextrin Derivatization by Mechanochemistry

Cyclodextrin (CD) derivatives are a challenge, mainly due to solubility problems. In many cases, the synthesis of CD derivatives requires high-boiling solvents, whereas the product isolation from the aqueous methods often requires energy-intensive processes. Complex formation faces similar challenges in that it involves interacting materials with conflicting properties. However, many authors also refer to the formation of non-covalent bonds, such as the formation of inclusion complexes or metal–organic networks, as reactions or synthesis, which makes it difficult to classify the technical papers. In many cases, the solubility of both the starting material and the product in the same solvent differs significantly. The sweetest point of mechanochemistry is the reduced demand or complete elimination of solvents from the synthesis. The lack of solvents can make syntheses more economical and greener. The limited molecular movements in solid-state allow the preparation of CD derivatives, which are difficult to produce under solvent reaction conditions. A mechanochemical reaction generally has a higher reagent utilization rate. When the reaction yields a good guest co-product, solvent-free conditions can be slower than in solution conditions. Regioselective syntheses of per-6-amino and alkylthio-CD derivatives or insoluble cyclodextrin polymers and nanosponges are good examples of what a greener technology can offer through solvent-free reaction conditions. In the case of thiolated CD derivatives, the absence of solvents results in significant suppression of the thiol group oxidation, too. The insoluble polymer synthesis is also more efficient when using the same molar ratio of the reagents as the solution reaction. Solid reactants not only reduce the chance of hydrolysis of multifunctional reactants or side reactions, but the spatial proximity of macrocycles also reduces the length of the spacing formed by the crosslinker. The structure of insoluble polymers of the mechanochemical reactions generally is more compact, with fewer and shorter hydrophilic arms than the products of the solution reactions.

Green synthesis of copper nanoparticles using Cissus vitiginea and its antioxidant and antibacterial activity against urinary tract infection pathogens

The green approachable of metal nanoparticles is treated to be an eco-friendly path and cost-effectiveness. In this present study, nano copper was synthesized profitably by Cissus vitiginea. The synthesized nano copper was used to evaluate the antioxidant and antibacterial activity against urinary tract infections pathogens. The resulting constructed nanoparticles were characterized by using ultraviolet spectroscopy absorbance around 370 nm. Scanning electron microscopy results showed the distribution of nanoparticles and particles sizes are found to be in the range of 5-20 nm. X-ray diffraction spectrum characteristic diffraction peaks for copper nanoparticles were observed at 2θ ranges 35.5 and 43.2° correspond to lattice planes (1 1 1) and (2 0 2), respectively. X-ray photoelectron spectroscopy shows that two distinct peaks at binding energy resulted that the chemical states of copper. The results serve the evidence that the green mediated nano copper might indeed be the potential source to treat urinary tract infections caused by E. coli, Enterococcus sp., Proteus sp. and Klebsiella sp. This fact-finding conclusion is that C. vitiginea leaf extract based green synthesis nano copper particles proved to effectively kill it or significantly inhibit activity contra to urinary tract infection pathogens and exhibit excellent antioxidant activity.

Conifer-Derived Metallic Nanoparticles: Green Synthesis and Biological Applications

The use of metallic nanoparticles in engineering and biomedicine disciplines has gained considerable attention. Scientists are exploring new synthesis protocols of these substances considering their small size and lucrative antimicrobial potential. Among the most economical techniques of synthesis of metallic nanoparticles via chemical routes, which includes the use of chemicals as metal reducing agents, is considered to generate nanoparticles possessing toxicity and biological risk. This limitation of chemically synthesized nanoparticles has engendered the exploration for the ecofriendly synthesis process. Biological or green synthesis approaches have emerged as an effective solution to address the limitations of conventionally synthesized nanoparticles. Nanoparticles synthesized via biological entities obtained from plant extracts exhibit superior effect in comparison to chemical methods. Recently, conifer extracts have been found to be effective in synthesizing metallic nanoparticles through a highly regulated process. The current review highlights the importance of conifers and its extracts in synthesis of metallic nanoparticles. It also discusses the different applications of the conifer extract mediated metallic nanoparticles.

Green and efficient biosynthesis of pectin-based copper nanoparticles and their antimicrobial activities

Herein, we reported a green biosynthesis method of copper nanoparticles (CuNPs) at microwave irradiation condition by using pectin as a stabilizer and ascorbic acid as a reducing agent. Under the optimum conditions, CuNPs1 and 2 were synthesized under microwave times 0 and 3 min, respectively. Transmission electron microscope and scanning electron microscope (SEM) tests showed that CuNPs1 and 2 had irregular polygon particles with average diameters of 61.9 ± 19.4 and 40.9 ± 13.6 nm, respectively. Zeta potentials of CuNPs1 and 2 were -45.2 and -48.7 mV, respectively. X-ray diffraction, Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and X-ray photoelectron spectroscopy techniques were used to characterize the properties of CuNPs. Furthermore, inhibition zone tests showed that CuNPs2 exhibited higher antimicrobial activities against Escherichia coli, Staphylococcus aureus, and Aspergillus japonicus than CuNPs1. The antibacterial activities were also studied by the bacterial growth kinetics in broth media, and CuNPs2 exhibited lower minimum bactericidal concentrations than CuNPs1.

Biosynthesis, Characterization, and Wound-Healing Activity of Phenytoin-Loaded Copper Nanoparticles

Wound-healing is a very complex and evolutionary process that involves a great variety of dynamic steps. Although different pharmaceutical agents have been developed to hasten the wound-healing process, the existing agents are still far from optimal. The present work aimed to prepare and evaluate the wound-healing efficacy of phenytoin-loaded copper nanoparticles (PHT-loaded CuNPs). CuNPs were biosynthesized using licorice aqueous extract. The prepared CuNPs were loaded with PHT by adsorption, characterized, and evaluated for wound-healing efficiency. Results showed that both plain and PHT-loaded CuNPs were monodisperse and exhibited a cubic and hexagonal morphology. The mechanism by which PHT was adsorbed on the surface of CuNPs was best fit by the Langmuir model with a maximum loaded monolayer capacity of 181 mg/g. The kinetic study revealed that the adsorption reaction followed the pseudo-second order while the thermodynamic parameters indicated that the adsorption process was physical in nature and endothermic, and occurred spontaneously. Moreover, the in vivo wound-healing activity of PHT-loaded CuNP impregnated hydroxypropylmethyl cellulose (HPMC) gel was carried out using an excisional wound model in rats. Data showed that PHT-loaded CuNPs accelerated epidermal regeneration and stimulated granulation and tissue formation in treated rats compared to controls. Additionally, quantitative real-time polymerase chain reaction (RT-PCR) analysis showed that lesions treated with PHT-loaded CuNPs were associated with a marked increase in the expression of dermal procollagen type I and a decrease in the expression of the inflammatory JAK3 compared to control samples. In conclusion, PHT-loaded CuNPs are a promising platform for effective and rapid wound-healing.

Green synthesis of graphene oxide (GO)-anchored Pd/Cu bimetallic nanoparticles using Ocimum sanctum as bio-reductant: an efficient heterogeneous catalyst for the Sonogashira cross-coupling reaction

To explore the synergism between two metal centers we have synthesized graphene oxide (GO) supported Pd/Cu@GO, Pd@GO and Cu@GO nanoparticles through bio-reduction of Pd(NO3)2 and CuSO4·5H2O using Tulsi (Ocimum sanctum) leaf extract as the reducing and stabilizing agent. The graphene oxide (GO) was obtained by oxidation of graphite following a simplified Hummer's method. The as-prepared nanomaterials have been extensively characterized by FTIR, powder X-ray diffraction (PXRD), HRTEM, TEM-EDS, XPS, ICP-AES and BET surface area measurement techniques. The morphological study of Pd/Cu@GO revealed that crystalline bimetallic alloy type particles were dispersed on the GO layer. The activity of Pd@GO, Cu@GO and Pd/Cu@GO as catalysts for the Sonogashira cross-coupling reaction have been investigated and it was found that the Pd/Cu@GO nanostructure showed highly superior catalytic activity over its monometallic counterparts, substantiating the cooperative influence of the two metals. The inter-atom Pd/Cu transmetalation between surfaces was thought to be responsible for its synergistic activity. The catalyst showed higher selectivity towards coupling of aryl iodides with both aliphatic and aryl alkynes resulting in moderate to excellent isolated yield of the desired products (45-99%). The products have been characterized by GC-MS and 1H-NMR spectroscopic techniques and compared with authentic samples. The Pd/Cu@GO catalyst could be easily isolated from the reaction products and reused for up to at least ten successive runs effectively.

Anti-bacterial and anti-biofilm properties of green synthesized copper nanoparticles from Cardiospermum halicacabum leaf extract

In the present study, a copper nanoparticle (Cu NPs) was synthesized by a green synthesis method with Cardiospermum halicacabum leaf extract. The surface area of Cu NPs was measured with dynamic light scattering (DLS). UV-Vis spectrum clearly illustrates the typical absorption peak of Cu NPs. The crystalline property of Cu NPs was confirmed from the XRD pattern. TEM analysis clearly indicates the average particle size of synthesized Cu NPs was in the range of 30-40 nm with hexagonal shape. Energy-dispersive spectroscopy confirms the major strong peaks of Cu NPs. FTIR analysis confirms the existence of various functional biomolecules over the metal nanoparticles and they are playing an important role in the formation of Cu NPs. The antibacterial and anti-biofilm analyses were carried out to confirm their aptitude for biomedical applications. Interestingly, Cu NPs control the development of biofilm by attaching over the cell wall and disturb their growth and development.

Antibacterial and antioxidant potential of biosynthesized copper nanoparticles mediated through Cissus arnotiana plant extract

Environment friendly methods for the synthesis of copper nanoparticles have become a valuable trend in the current scenario. The utilization of phytochemicals from plant extracts has become a unique technology for the synthesis of nanoparticles, as they possess dual nature of reducing and capping agents to the nanoparticles. In the present investigation we have synthesized copper nanoparticles (CuNPs) using a rare medicinal plant Cissus arnotiana and evaluated their antibacterial activity against gram negative and gram positive bacteria. The morphology and characterization of the synthesized CuNPs were studied and done using UV-Visible spectroscopy at a wavelength range of 350-380 nm. XRD studies were performed for analyzing the crystalline nature; SEM and TEM for evaluating the spherical shape within the size range of 60-90 nm and AFM was performed to check the surface roughness. The biosynthesized CuNPs showed better antibacterial activity against the gram-negative bacteria, E. coli with an inhibition zone of 22.20 ± 0.16 mm at 75 μg/ml. The antioxidant property observed was comparatively equal with the standard antioxidant agent ascorbic acid at a maximum concentration of 40 μg/ ml. This is the first study reported on C. arnotiana mediated biosynthesis of copper nanoparticles, where we believe that the findings can pave way for a new direction in the field of nanotechnology and nanomedicine where there is a significant potential for antibacterial and antioxidant activities. We predict that, these could lead to an exponential increase in the field of biomedical applications, with the utilization of green synthesized CuNPs, due to its remarkable properties. The highest antibacterial property was observed with gram-negative strains mainly, E. coli, due to its thin peptidoglycan layer and electrostatic interactions between the bacterial cell wall and CuNPs surfaces. Hence, CuNPs can be potent therapeutic agents in several biomedical applications, which are yet to be explored in the near future.

Adsorption of Congo Red (Acid Red 28) Azodye on Biosynthesized Copper Oxide Nanoparticles

A green synthesis of copper oxide nanoparticles and its removal efficiency of azodye were studied. Biosynthesis of stable copper oxide nanoparticles were preformed using Aloe barbadensis leaf extract as a size and shape-directing agent for preparing of spherical copper oxide nanoparticles by calcination at 400 °C. The leaf extract of Aloe barbadensis was prepared in deionized water. The produced copper particles were calcined at 400 °C to produce copper oxide nanoparticles. The characterization of copper oxide nanoparticles was performed by XRD, SEM, FTIR, UV spectroscopy. The XRD analysis showed that the average particle size was between 5-30 nm. The shape of the copper oxide nanoparticles was spherical and cubic. EDX of the synthesized nanoparticles showed the composition consists of 68 % copper. The UV-visible spectrum analysis confirms an absorption peak at 200-400 nm of the produced CuO nanoparticles. The FTIR analysis of the copper oxide particles indicate the presence of the organometallic Cu-O bond between Cu and O. The obtained copper oxide was used as a removing agent of Congo red dye. The effect of variables like concentration, time, pH, adsorbent dosage were studied. It was observed from the results that the maximum dye removal occurs at pH of 4, the concentration of nanoparticles was 1 mg/L and the maximum time for dye removal was 120 min. The Langmuir isotherm model was calculated to study the adsorption efficiency of the Congo red dye on the produced copper oxide nanoparticles. The kinetics of pseudo second order is followed by adsorption. The calculated sum of square was 0.012 and r2 = 0.98. it was observed that the model fit the best and straight line with r2 value of 0.991 and probability value of 1.6E-5. The nanoparticles remove 70 % of the Congo red dye from its solution. This showed that the copper oxide nanoparticles has efficient capacity of azodye degradation.

Efficient monitoring of dosimetric behaviour for copper nanoparticles through studying its optical properties

A novel high-dose dosimeter based on γ radiation reduction of copper ions and formation of copper metal inside polymer matrix were investigated. γ radiation induced synthesis of copper nanoparticles (CuNPs) in poly vinyl alcohol films were studied by UV-Visible Spectrophotometer, X-ray diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FTIR). The optical absorption spectra showed that the Cu/PVA nanocomposite films have surface plasmon resonance (SPR) of copper nanoparticles which depending on irradiation doses. Upon γ irradiation these films turns its color from faint blue to deep reddish brown depending on metal ion concentration. The XRD pattern and FTIR spectrum confirm the formation of the CuNPs. The response of Cu/PVA nanocomposite dosimeters depends on both the irradiation doses and concentration of copper precursor. The dose range for these films was from 50 to 650 kGy, revealing its important applications for high dose dosimetry. Cu/PVA nanocomposites films exhibit good post-irradiation stability in dark and light.