Formulation and evaluation of cyclodextrin-based nanosponges of griseofulvin as pediatric oral liquid dosage form for enhancing bioavailability and masking bitter taste

Design and development of Ondansetron-loaded polysaccharide-based buoyant formulation for improved gastric retention and drug release, using both natural and semi-synthetic polymers

Extended gastric residence of drugs can enhance the therapeutic effect, increase bioavailability, improve efficacy, and reduce the number of required doses by prolonging the retention of the drug delivery system. A new floating drug delivery for Ondansetron was designed and evaluated. Pre-formulation studies included the assessment of powder flow properties and drug-excipient compatibility. In-vitro release studies and a buoyancy test were performed to characterize the performance of the system. The study evaluated the properties of Ondansetron tablets. The optimized batches had compressibility index values ranging from 7.272 % to 25 %, with percentage weight fluctuation ranging from 0 to 1.05 %. The tablets were 2.92 and 3.52 mm thick, hardness between 3.50 and 4.65 kg/cm2, and loss percentages between 0.12 and 0.68 %, except batch T8, which had high friability index values of 1.02. Thermo-gravimetric analysis and Differential scanning Calorimetry showed no interaction between the drug and other polymers. Formulations showed a sustained release of the drug for periods of >12 h for several compositions, while some showed a release of >90 %. The formulations with HPMC K4M showed slower drug release due to a strong hydro layer. Citric acid content increased drug release, suggesting modulation of drug release kinetics. Kinetic modeling revealed that some of the formulations exhibited zero-order release kinetics, which means that the drug is released at a constant rate to maintain a steady level of the drug in the body. This project aims to improve the therapeutic effect of Class I Biopharmaceutical Classification System (BCS I) drug ondansetron by using a stomach-retaining, floating drug delivery system. Promising results are indicative of better bioavailability and sustained therapeutic doses. Findings may influence the development of delivery methods for similar substances facing gastrointestinal absorption challenges.

Nanocarrier-Mediated Dermal Drug Delivery System of Antimicrobial Agents for Targeting Skin and Soft Tissue Infections

Antimicrobial resistance in disease-causing microbes is seen as a severe problem that affects the entire world, makes therapy less effective, and raises mortality rates. Dermal antimicrobial therapy becomes a desirable choice in the management of infectious disorders since the rising resistance to systemic antimicrobial treatment frequently necessitates the use of more toxic drugs. Nanoparticulate systems such as nanobactericides, which have built-in antibacterial activity, and nanocarriers, which function as drug delivery systems for conventional antimicrobials, are just two examples of the treatment methods made feasible by nanotechnology. Silver nanoparticles, zinc oxide nanoparticles, and titanium dioxide nanoparticles are examples of inorganic nanoparticles that are efficient on sensitive and multidrug-resistant bacterial strains both as nanobactericides and nanocarriers. To stop the growth of microorganisms that are resistant to standard antimicrobials, various antimicrobials for dermal application are widely used. This review covers the most prevalent microbes responsible for skin and soft tissue infections, techniques to deliver dermal antimicrobials, topical antimicrobial safety concerns, current issues, challenges, and potential future developments. A thorough and methodical search of databases, such as Google Scholar, PubMed, Science Direct, and others, using specified keyword combinations, such as "antimicrobials," "dermal," "nanocarriers," and numerous others, was used to gather relevant literature for this work.

Novel microwave-based green approach for the synthesis of dual-loaded cyclodextrin nanosponges: Characterization, pharmacodynamics, and pharmacokinetics evaluation

Recently, microwave-based cyclodextrin nanosponges (CDNS) of domperidone (DOM) for their solubility and dissolution improvement have been studied. However, microwave-based CDNS for the dual-loading of cinnarizine (CIN) and DOM have not been documented. Therefore, this research concentrates explicitly on the concurrent loading of two drugs employing these nanocarriers, namely CIN and DOM, both categorized under Class II of the Biopharmaceutical Classification System. A green approach involving microwave synthesis was employed to fabricate these nanocarriers. Fourier transform infrared (FTIR) spectroscopy confirmed the formation of CDNS, while scanning electron microscopy scans illustrated their porous nature. X-ray diffraction studies established the crystalline structure of the nanocarriers. Differential scanning calorimetry and FTIR analyses corroborated the drugs’ loading and subsequent amorphization. In vitro drug release studies demonstrated an enhanced solubility of the drugs, suggesting a potential improvement in their bioavailability. The in vivo pharmacokinetic investigation emphatically substantiated this hypothesis, revealing a 4.54- and 2.90-fold increase in the bioavailability of CIN and DOM, respectively. This enhancement was further supported by the results of the pharmacodynamic study utilizing the gastrointestinal distress/pica model, which indicated a significantly reduced consumption of kaolin. Conclusively, this study affirms the adaptability of microwave-based CDNS for the concurrent loading of multiple drugs, leading to improved solubility and bioavailability.

Nanosponge hydrogel of octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl) propanoate of Alcaligenes faecalis

Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl) propanoate (ODHP) was extracted in a previous study from the culture broth of soil isolate Alcaligenes faecalis MT332429 and showed a promising antimycotic activity. This study was aimed to formulate ODHP loaded β-cyclodextrins (CD) nanosponge (NS) hydrogel (HG) to control skin fungal ailments since nanosponges augment the retention of tested agents in the skin. Box-Behnken design was used to produce the optimized NS formulation, where entrapment efficiency percent (EE%), polydispersity index (PDI), and particle size (PS) were assigned as dependent parameters, while the independent process parameters were polyvinyl alcohol % (w/v %), polymer-linker ratio, homogenization time, and speed. The carbopol 940 hydrogel was then created by incorporating the nanosponges. The hydrogel fit Higuchi's kinetic release model the best, according to in vitro drug release. Stability and photodegradation studies revealed that the NS-HG remained stable under tested conditions. The formulation also showed higher in vitro antifungal activity against Candida albicans compared to the control fluconazole. In vivo study showed that ODHP-NS-HG increased survival rates, wound contraction, and healing of wound gap and inhibited the inflammation process compared to the other control groups. The histopathological examinations and Masson's trichrome staining showed improved healing and higher records of collagen deposition. Moreover, the permeability of ODHP-NS-HG was higher through rats' skin by 1.5-folds compared to the control isoconazole 1%. Therefore, based on these results, NS-HG formulation is a potential carrier for enhanced and improved topical delivery of ODHP. Our study is a pioneering research on the development of a formulation for ODHP produced naturally from soil bacteria. KEY POINTS: • Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl) propanoate was successfully formulated as a nanosponge hydrogel and statistically optimized. • The new formula exhibited in vitro good stability, drug release, and higher antifungal activity against C. albicans as compared to the fluconazole. • Ex vivo showed enhanced skin permeability, and in vivo analysis showed high antifungal activity as evidenced by measurement of various biochemical parameters and histopathological examination.

State of the art in pediatric nanomedicines

In recent years, the continuous development of innovative nanopharmaceuticals is expanding their biomedical and clinical applications. Nanomedicines are being revolutionized to circumvent the limitations of unbound therapeutic agents as well as overcome barriers posed by biological interfaces at the cellular, organ, system, and microenvironment levels. In many ways, the use of nanoconfigured delivery systems has eased challenges associated with patient differences, and in our opinion, this forms the foundation for their potential usefulness in developing innovative medicines and diagnostics for special patient populations. Here, we present a comprehensive review of nanomedicines specifically designed and evaluated for disease management in the pediatric population. Typically, the pediatric population has distinguishing needs relative to those of adults majorly because of their constantly growing bodies and age-related physiological changes, which often need specialized drug formulation interventions to provide desirable therapeutic effects and outcomes. Besides, child-centric drug carriers have unique delivery routes, dosing flexibility, organoleptic properties (e.g., taste, flavor), and caregiver requirements that are often not met by traditional formulations and can impact adherence to therapy. Engineering pediatric medicines as nanoconfigured structures can potentially resolve these limitations stemming from traditional drug carriers because of their unique capabilities. Consequently, researchers from different specialties relentlessly and creatively investigate the usefulness of nanomedicines for pediatric disease management as extensively captured in this compilation. Some examples of nanomedicines covered include nanoparticles, liposomes, and nanomicelles for cancer; solid lipid and lipid-based nanostructured carriers for hypertension; self-nanoemulsifying lipid-based systems and niosomes for infections; and nanocapsules for asthma pharmacotherapy.

Evaluating the potential of ethyl cellulose/eudragit-based griseofulvin loaded nanosponge matrix for topical antifungal drug delivery in a sustained release pattern

Fungal infections are very alarming nowadays and are common throughout the world. Severe fungal infections may lead to a significant risk of mortality and morbidity worldwide. Sustained delivery of antifungal agents is needed to mitigate this problem. In the current study, an attempt has been made to formulate griseofulvin-loaded nanosponges using the quasi-emulsion solvent diffusion technique. For characterization, griseofulvin loaded nanosponges were tested by different instrumental techniques such as optical microscopy, scanning electron microscopy (SEM), powder X-ray diffractometer (PXRD), Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), and transmission electron microscopy (TEM). The antifungal activity of the nanosponges was assessed against Candida albican strain using the agar well-diffusion method. Finally, the drug-loaded nanosponges' in vitro sustained release activity was evaluated. FTIR spectra showed no chemical interference between the drug and polymers. Some of the peaks of the drug are not visible in the FTIR spectrum, which suggests drug entrapment. PXRD data showed that the drug lost its high crystallinity when entrapped in the nanosponge matrix. From the morphological studies via SEM and TEM, a brief idea of the surface morphology of the nanosponges was obtained. The small pores throughout the structure proved its high porosity. The antifungal sensitivity assay was successful, and a zone of inhibition was observed in all the formulations. The in-vitro drug release study showed sustained behaviour. The sustaining effect was due to the polymer and cross-linker used, which gave rise to a porous scaffold matrix. From the results, it can be concluded that griseofulvin-loaded nanosponges can be used for antifungal drug delivery against various topical skin infections.

Appraisal terpenoids rich Boswellia carterri ethyl acetate extract in binary cyclodextrin oligomer nano complex for improving respiratory distress

Boswellia carterii (BC) resins plants have a long historical background as a treatment for inflammation, as indicated by information originating from multiple countries. Twenty-seven diterpenoids have been identified in ethyl acetate and total methanol BC, comprising seventeen boscartins of the cembrane-type diterpenoids and ten boscartols of the prenylaromadendrane-type diterpenoids. Moreover, twenty-one known triterpenoids have also been found, encompassing nine tirucallane-type, six ursane-type, four oleanane-type, and two lupane-type. The cembrane-type diterpenoids hold a significant position in pharmaceutical chemistry and related industries due to their captivating biological characteristics and promising pharmacological potentials. Extraction of BC, creation and assessment of nano sponges loaded with either B. carterii plant extract or DEX, are the subjects of our current investigation. With the use of ultrasound-assisted synthesis, nano sponges were produced. The entrapment efficiency (EE%) of medications in nano sponges was examined using spectrophotometry. Nano sponges were characterized using a number of methods. Within nano sponges, the EE% of medicines varied between 98.52 ± 0.07 and 99.64 ± 1.40%. The nano sponges' particle sizes varied from 105.9 ± 15.9 to 166.8 ± 26.3 nm. Drugs released from nano sponges using the Korsmeyer-Peppas concept. In respiratory distressed rats, the effects of BC plant extract, DEX salt and their nano formulations (D1, D5, P1 and P1), were tested. Treatment significantly reduced ICAM-1, LTB4, and ILβ 4 levels and improved histopathologic profiles, when compared to the positive control group. Boswellia extract and its nano sponge formulation P1 showed promising therapeutic effects. The effect of P1 may be due to synergism between both the extract and the formulation. This effect was achieved by blocking both ICAM-1 and LTB4 pathways, therefore counteracting the effects of talc powder.

QbD Assisted Systematic Review for Optimizing the Selection of PVP as a Ternary Substance in Enhancing the Complexation Efficiency of Cyclodextrins: a Pilot Study

Inclusion complexes require higher concentration of Beta cyclodextrins (βCD) resulting in increased formulation bulk, toxicity, and production costs. This systematic review offers a comprehensive analysis using Quality by design (QbD) as a tool to predict potential applications of Polyvinylpyrrolidone (PVP) as a ternary substance to address issues of inclusion complexes. We reviewed 623 documents from 2013 to 2023 and Eighteen (18) research papers were selected for statistical and meta-analysis using the QbD concept to identify the most critical factors for selecting drugs and effect of PVP on inclusion complexes. The QbD analysis revealed that Molecular weight (MW), Partition coefficient (Log P), and the auxiliary substance ratio directly affected complexation efficiency (CE), thermodynamic stability in terms of Gibbs free energy (ΔG), and percent drug release. However, Stability constant (Ks) remained unaffected by any of these parameters. The results showed that low MW (250), median Log P (6), and a βCD: PVP ratio of 2:3 would result in higher CE, lower G, and improved drug release. PVP improves drug solubility, enhances delivery and therapeutic outcomes, and counteracts increased drug ionization due to decreased pH. In certain cases, its bulky nature and hydrogen bonding with CD molecules can form non-inclusion complexes. The findings of the study shows that there is potential molecular interaction between PVP and β-cyclodextrins, which possibly enhances the stability of inclusion complexes for drug with low MW and log P values less than 9. The systematic review shows a comprehensive methodology based on QbD offers a replicable template for future investigations into drug formulation research.

Enhancing anti-inflammatory effect of brucine nanohydrogel using rosemary oil: a promising strategy for dermal delivery in arthritic inflammation

Brucine (BRU), an active constituent of Strychnos nux-vomica L., is one of the potential agents to control subside swelling in arthritis. However, its hydrophobic nature, poor permeation, shorter half-life, narrow therapeutic window, and higher toxicity impede its clinical applications. Hence, this investigation was aimed to develop and evaluate novel BRU loaded β-cyclodextrin (β-CD) nanosponges (BRUNs) hydrogel consisting rosemary essential oil (RO), which have been tailored for delayed release, enhanced skin permeation, and reduced irritation, while retaining anti-oxidant and anti-inflammatory activities of this bioactive. Firstly, BRUNs were fabricated by melt technique and characterized appropriately. BRUNs6 demonstrated two fold enhancement in BRU solubility (441.692 ± 38.674) with minimum particle size (322.966 ± 54.456) having good PDI (0.571 ± 0.091) and zeta potential (-14.633 ± 6.357). In vitro release results demonstrated delayed release of BRU from BRUNs6 (67 ± 4.25%) over 24 h through molecular diffusion mechanism. Further, preserved anti-inflammatory (53.343 ± 0.191%) and antioxidant potential (60.269 ± 0.073%) of bioactive was observed in BRUNs6. Hence, this Ns batch was engrossed with Carbopol®934 hydrogel with RO and characterized. In vitro (release and anti-inflammatory activity), ex-vivo (skin permeability) and in vivo (carrageenan-induced inflammation) assays along with irritation study were conducted for fabricated hydrogels. Results revealed that in vitro release of BRU was further delayed from Ns hydrogel with RO (56.45 ± 3.01%) following Fickian mechanism. Considerable enhancement in skin permeability (60.221 ± 0.322 µg/cm2/h) and preservation of anti-inflammatory activity (94.736 ± 2.002%) was also observed in BRUNs6 hydrogel containing RO. The irritation of BRU was found reduced (half) after its entrapped in Ns. Further, as a proof of concept, BRUNs6 hydrogel with RO effectively reduced (75.757 ± 0.944%) carrageenan-induced inflammation in rat model in comparison to pure BRU (54.914 ± 1.081%). Hence, BRUNs hydrogel with RO can be considered as a promising alternative for dermal delivery of BRU in arthritis.

Pharmacokinetics and pharmacodynamics of cyclodextrin-based oral drug delivery formulations for disease therapy

Oral drug administration has become the most common and preferred mode of disease treatment due to its good medication adherence and convenience. For orally administered drugs, the safety, efficacy, and targeting ability requirements have grown as disease treatment research advances. It is difficult to obtain prominent efficacy of traditional drugs simply via oral administration. Numerous studies have demonstrated that cyclodextrins (CDs) can improve the clinical applications of certain orally administered drugs by enhancing their water solubility and masking undesirable odors. Additionally, deeper studies have discovered that CDs can influence disease treatment by altering the drug pharmacokinetics (PK) or pharmacodynamics (PD). This review highlights recent research progress on the PK and PD effects of CD-based oral drug delivery in disease therapy. Firstly, the review describes the characteristics of current drug delivery modes in oral administration. Besides, we minutely summarized the different CD-containing drugs, focusing on the impact of CD-based alterations in PK or PD of orally administered drugs in treating diseases. Finally, we deeply discussed current challenges and future opportunities with regard to PK and PD of CD-based oral drug delivery formulations.

Cyclodextrin-based nanosponges as promising carriers for active pharmaceutical ingredient

Effective drug distribution at the intended or particular location is a critical issue that researchers are now dealing. Nanosponges have significantly increased in importance in medication delivery using nanotechnology in recent years. An important step toward solving these problems has been the development of nanosponges. Recently created and proposed for use in drug delivery, nanosponge is a unique type of hyper-crosslinked polymer-based colloidal structures made up of solid nanoparticles with colloidal carriers. Nanosponges are solid porous particles that may hold pharmaceuticals and other actives in their nanocavities. They can be made into dosage forms for oral, parenteral, topical, or inhalation use. The targeted distribution of drugs in a regulated manner is greatly aided by nanosponge. The utilization of nanosponges, their benefits, their production processes, the polymers they are made of, and their characterization have all been covered in this review article.

Incorporation of exemestane into ternary nanosponge system for enhanced anti-tumor potential in breast cancer

The present investigation reports the potential of exemestane loaded cyclodextrin based nanosponges for the treatment of breast cancer. Fourier transform infrared, and nuclear magnetic resonance (NMR) spectroscopic analysis confirmed the encapsulation of ring B, C, and D of exemestane in the nanosponge cavity. In vitro studies demonstrated a 6.58-folds increase in the aqueous solubility and a 1.76-folds increase in the dissolution of exemestane in the optimized nanosponge formulation EF2. It also exhibited enhanced cytotoxicity in MCF-7 cell line. Pharmacokinetic studies revealed a 1.37-fold increase in Cmax and a 2.10-fold increase in oral bioavailability of EF2, as compared to its marketed product Aromasin®. Concomitantly, this nano-formulation reduced the tumor burden to 45.71% in a DMBA-induced breast cancer rat model. This EF2-treatment also improved the hematological parameters of the animals. Histopathology of breast tissue also presented reduction in characteristic cytoarchitectural features of breast tumor. In vivo toxicity studies demonstrated reduced hepatotoxicity of the nanosponge formulation when compared with Aromasin®. These results were further supported by histological studies of excised liver tissues, where the size of hepatocytes in EF2-treated animals was like the normal hepatocyte size. In conclusion, the encapsulation of exemestane in β-cyclodextrin nanosponge along-with HPMC E5 improved its aqueous solubility, bioavailability, and ultimately therapeutic efficacy for the treatment of breast cancer.

Solubility and Pharmacokinetic Profile Improvement of Griseofulvin through Supercritical Carbon Dioxide-Assisted Complexation with HP-γ-Cyclodextrin

Since griseofulvin was marketed as a non-polyene antifungal antibiotic drug in 1958, its poor water solubility has been an issue for its wide applications, and over the last sixty years, many attempts have been made to increase its water solubility; however, a significant result has yet to be achieved. Through supercritical carbon dioxide-assisted cyclodextrin complexation with the addition of a trace amount of water-soluble polymer surfactant, the griseofulvin inclusion complex with HP-γ-cyclodextrin was prepared and confirmed. The 1:2 ratio of griseofulvin and HP-γ-cyclodextrin in the complex was determined based on its NMR study. After complexation with HP-γ-cyclodextrin, griseofulvin's water solubility was increased 477 times compared with that of griseofulvin alone, which is the best result thus far. The complex showed 90% of griseofulvin release in vitro in 10 min, in an in vivo dog pharmacokinetic study; the Cmax was increased from 0.52 µg/mL to 0.72 µg/mL, AUC0-12 was increased from 1.55 μg·h/mL to 2.75 μg·h/mL, the clearance was changed from 51.78 L/kg/h to 24.16 L/kg/h, and the half-life time was changed from 0.81 h to 1.56 h, indicating the obtained griseofulvin complex can be a more effective drug than griseofulvin alone.

Cyclodextrin Inclusion Complexes for Improved Drug Bioavailability and Activity: Synthetic and Analytical Aspects

Many active pharmaceutical ingredients show low oral bioavailability due to factors such as poor solubility and physical and chemical instability. The formation of inclusion complexes with cyclodextrins, as well as cyclodextrin-based polymers, nanosponges, and nanofibers, is a valuable tool to improve the oral bioavailability of many drugs. The microencapsulation process modifies key properties of the included drugs including volatility, dissolution rate, bioavailability, and bioactivity. In this context, we present relevant examples of the stabilization of labile drugs through the encapsulation in cyclodextrins. The formation of inclusion complexes with drugs belonging to class IV in the biopharmaceutical classification system as an effective solution to increase their bioavailability is also discussed. The stabilization and improvement in nutraceuticals used as food supplements, which often have low intestinal absorption due to their poor solubility, is also considered. Cyclodextrin-based nanofibers, which are polymer-free and can be generated using environmentally friendly technologies, lead to dramatic bioavailability enhancements. The synthesis of chemically modified cyclodextrins, polymers, and nanosponges based on cyclodextrins is discussed. Analytical techniques that allow the characterization and verification of the formation of true inclusion complexes are also considered, taking into account the differences in the procedures for the formation of inclusion complexes in solution and in the solid state.

Enhancement in the therapeutic potential of Lapatinib ditosylate against breast cancer by the use of β-cyclodextrin based ternary nanosponge system

The present investigation was performed to demonstrate the therapeutic potential of lapatinib ditosylate (LD) loaded nanosponge for the treatment of breast cancer. The study reports the fabrication of nanosponge by reaction of β-cyclodextrin with a cross-linking agent, diphenyl carbonate, at several molar ratios using the ultrasound-assisted synthesis method. The drug was loaded into the rightest nanosponge by lyophilization with and without 0.25% w/w polyvinylpyrrolidone. The significantly reduced crystallinity of developed formulations was established by differential scanning calorimetry (DSC), and powder X-ray diffractometry (PXRD). Morphological changes of LD, and formulations were compared by scanning electron microscopic (SEM) technique. Fourier transform infrared (FT-IR), and nuclear magnetic resonance (NMR) spectroscopic analysis were performed to establish the interacting groups of the host and guest molecules. It revealed interaction of the quinazoline ring, furan ring, and chlorobenzene functionality of LD with the hydroxyl group of β-cyclodextrin based nanosponge. Similar predictions were also obtained during their in-silico analysis. Saturation solubility and in vitro drug release studies revealed a 4.03-fold, and 2.43-fold rise in aqueous solubility, and dissolution of LD in the optimized formula (F2). The MCF-7 cell line study, too, revealed the higher efficiency of nanosponge formulations. The in vivo pharmacokinetic studies of optimized formulation illustrated 2.76-times, and 3.34-times enhancements in C_max and oral bioavailability, respectively. Concomitant results were obtained during the in vivo studies performed using DMBA-induced breast cancer models in female Sprague Dawley rats. The tumor burden was found to be reduced to approximately 60% by the use of F2. The hematological parameters of animals treated with F2 were also improved. Histopathology of breast tissue excised from an F2-treated rat showed a reduced size of ductal epithelial cells associated with shrunken cribriform structures and cross-bridges. The in vivo toxicity studies also showcased reduced hepatotoxicity of the formulation. Altogether, it can be concluded that encapsulation of lapatinib ditosylate in β-cyclodextrin nanosponge has improved aqueous solubility, bioavailability and, in turn, therapeutic efficacy.

β-Cyclodextrin Nanosponges Inclusion Compounds Associated with Silver Nanoparticles to Increase the Antimicrobial Activity of Quercetin

This work aimed to synthesize and characterize a nanocarrier that consisted of a ternary system, namely β-cyclodextrin-based nanosponge (NS) inclusion compounds (ICs) associated with silver nanoparticles (AgNPs) to increase the antimicrobial activity of quercetin (QRC). The nanosystem was developed to overcome the therapeutical limitations of QRC. The host-guest interaction between NSs and QRC was confirmed by field emission scanning electron microscopy (FE-SEM), X-ray powder diffraction (XRPD), thermogravimetric analysis (TGA), and proton nuclear magnetic resonance (¹H-NMR). Moreover, the association of AgNPs with the NS-QRC was characterized using FE-SEM, energy-dispersive spectroscopy (EDS), transmission electron microscopy (TEM), dynamic light scattering (DLS), ζ-potential, and UV-Vis. Finally, the antimicrobial activity of the novel formulations was tested, which depicted that the complexation of QRC inside the supramolecular interstices of NSs increases the inhibitory effects against Escherichia coli ATCC25922, as compared to that observed in the free QRC. In addition, at the same concentrations used to generate an antibacterial effect, the NS-QRC system with AgNPs does not affect the metabolic activity of GES-1 cells. Therefore, these results suggest that the use of NSs associated with AgNPs resulted in an efficient strategy to improve the physicochemical features of QRC.

Optimisation of a Greener-Approach for the Synthesis of Cyclodextrin-Based Nanosponges for the Solubility Enhancement of Domperidone, a BCS Class II Drug

BCS class II molecules suffer from low oral bioavailability because of their poor permeability and sub-optimal aqueous solubility. One of the approaches to enhance their bioavailability is using cyclodextrin-based nanosponges. This study aimed to optimise and evaluate the feasibility of a microwave-assisted approach to synthesise nanosponges and improve domperidone's solubility and drug delivery potential. In the production process, microwave power level, response speed, and stirring speed were optimised using the Box-Behnken approach. Ultimately, the batch with the smallest particle size and highest yield was chosen. The optimised method of synthesis of the nanosponges resulted in a product yield of 77.4% and a particle size of 195.68 ± 2.16 nm. The nanocarriers had a drug entrapment capacity of 84 ± 4.2% and a zeta potential of -9.17± 0.43 mV. The similarity and the difference factors demonstrated proof-of-concept, showing that the drug release from the loaded nanosponges is significantly greater than the plain drug. Additionally, spectral and thermal characterisations, such as FTIR, DSC, and XRD, confirmed the entrapment of the drug within the nanocarrier. SEM scans revealed the porous nature of the nanocarriers. Microwave-assisted synthesis could be used as a better and greener approach to synthesise these nanocarriers. It could then be utilised to load drugs and improve their solubility, as seen in the case of domperidone.

Comparative evaluation of dithranol-loaded nanosponges fabricated by solvent evaporation technique and melt method

Background

Dithranol, a standard drug for psoriasis, has lured keen attention by virtue of its antioxidant, anti-proliferative and anti-inflammatory activities. However, its poor stability and solubility critically impair the formulation design, evaluation and administration. To improve these issues, dithranol was encased in β-cyclodextrin nanosponges using solvent evaporation technique. Previously, nanosponges containing dithranol were developed in our laboratory using melt technique. Herein, a comparison of nanosponges prepared by both techniques was also included.

Results

Different nanosponge batches were engineered using diphenyl carbonate as cross-linker with β-cyclodextrin as polymer employing solvent evaporation technique. Dithranol was loaded in nanosponges via lyophilization. Fourier transform infrared spectroscopy, differential scanning colorimeter and powdered X-ray diffraction studies confirmed successful encapsulation and complexation of this drug in β-cyclodextrin nanosponges. The effect of a variable amount of cross-linker on the solubility, encapsulation efficiency, zeta potential, particle size and polydispersity index was evaluated in fabricated nanocarriers. Further, β-cyclodextrin nanosponge batches were subjected to solubility studies, photostability examination and antioxidant activity analysis and compared with previously prepared dithranol-loaded nanosponges. From the present studies results, it was concluded that dithranol-loaded nanosponges using solvent evaporation technique not only improved solubility and photostability but also preserved the antioxidant efficacy of the chosen drug.

Conclusion

The overall results emphasized moral guidance concerning encapsulation, evaluation and characterization and accredited dithranol solubilization, photostability and antioxidant potential. However, solvent evaporation and melt method are easy and promising methods to fabricate nanosponges for dithranol. This comparative study demonstrated the parameters which were affected by chosen techniques. Further, from the results of present studies, it was concluded that the formulation scientists should select the preparation technique based on the objective of their research work and requirement of desired features.

Graphical abstract

Solid-State Formation of a Potential Melphalan Delivery Nanosystem Based on β-Cyclodextrin and Silver Nanoparticles

Melphalan (Mel) is an antineoplastic widely used in cancer and other diseases. Its low solubility, rapid hydrolysis, and non-specificity limit its therapeutic performance. To overcome these disadvantages, Mel was included in β-cyclodextrin (βCD), which is a macromolecule that increases its aqueous solubility and stability, among other properties. Additionally, the βCD-Mel complex has been used as a substrate to deposit silver nanoparticles (AgNPs) through magnetron sputtering, forming the βCD-Mel-AgNPs crystalline system. Different techniques showed that the complex (stoichiometric ratio 1:1) has a loading capacity of 27%, an association constant of 625 M^-1, and a degree of solubilization of 0.034. Added to this, Mel is partially included, exposing the NH₂ and COOH groups that stabilize AgNPs in the solid state, with an average size of 15 ± 3 nm. Its dissolution results in a colloidal solution of AgNPs covered by multiple layers of the βCD-Mel complex, with a hydrodynamic diameter of 116 nm, a PDI of 0.4, and a surface charge of 19 mV. The in vitro permeability assays show that the effective permeability of Mel increased using βCD and AgNPs. This novel nanosystem based on βCD and AgNPs is a promising candidate as a Mel nanocarrier for cancer therapy.

An Overview of Taste-Masking Technologies: Approaches, Application, and Assessment Methods

It is well-known that plenty of active pharmaceutical ingredients (API) inherently possess an unpleasant taste, which influences the acceptance of patients, especially children. Therefore, manufacturing taste-masked dosage forms has attracted a lot of attention. This review describes in detail the taste-masking technologies based on the difference in the taste transmission mechanism which is currently available. In particular, the review highlights the application of various methods, with a special focus on how to screen the appropriate masking technology according to the properties of API. Subsequently, we overviewed how to assess taste-masking efficacy, guiding researchers to rationally design taste-masking formulations.

Optimizing Dacarbazine Therapy: Design of a Laser-Triggered Delivery System Based on β-Cyclodextrin and Plasmonic Gold Nanoparticles

Dacarbazine (DB) is an antineoplastic drug extensively used in cancer therapy. However, present limitations on its performance are related to its low solubility, instability, and non-specificity. To overcome these drawbacks, DB was included in β-cyclodextrin (βCD), which increased its aqueous solubility and stability. This new βCD@DB complex has been associated with plasmonic gold nanoparticles (AuNPs), and polyethylene glycol (PEG) has been added in the process to increase the colloidal stability and biocompatibility. Different techniques revealed that DB allows for a dynamic inclusion into βCD, with an association constant of 80 M^-1 and a degree of solubilization of 0.023, where βCD showed a loading capacity of 16%. The partial exposure of the NH₂ group in the included DB allows its interaction with AuNPs, with a loading efficiency of 99%. The PEG-AuNPs-βCD@DB nanosystem exhibits an optical plasmonic absorption at 525 nm, a surface charge of -29 mV, and an average size of 12 nm. Finally, laser irradiation assays showed that DB can be released from this platform in a controlled manner over time, reaching a concentration of 56 μg/mL (43% of the initially loaded amount), which, added to the previous data, validates its potential for drug delivery applications. Therefore, the novel nanosystem based on βCD, AuNPs, and PEG is a promising candidate as a new nanocarrier for DB.

Nanosponges- Versatile Platform as Drug Carrier

BACKGROUND

Recently, nano-drug delivery systems have become an integral part of the most novel drug delivery systems and have gained considerable importance owing to various advantages such as carriers for poorly soluble drugs, targeting molecules at the desired site, protection from degradation etc. Objective: One of the most studied areas of nanotechnology is nanosponges. The objective of this review was to extensively summarize the various strategies for the preparation, characterization and applications of nanosponges.

METHODS

In the current mini-review, we conducted a systemic search of the literature and patent inventions focusing on nanosponges. The summary of the search was inclusive of various aspects of nanosponges, such as drug characteristics to be considered while incorporating in nanosponges, other crucial additives during formulation of nanosponges, methods of preparation, characterization and applications of nanosponges in pharmaceuticals.

RESULTS

Nanosponges are nanocarriers for both lipophilic and hydrophilic drugs. These are prepared by different methods such as emulsion-solvent evaporation, solvent method, melting method, ultrasound assisted method etc., and all these methods were less time consuming, more economical and evaluated by sophisticated techniques available for routine analysis. These are among the most feasible alternative to address several formulation difficulties associated with the physicochemical properties of the drug. The porous nature and small particle size are vital properties of the nanosponges that contribute crucially to correcting the drawbacks of the drug. The properties of the nanosponges can be enhanced when combined with cyclodextrins. Extensive research work has been carried out in past to explore cyclodextrin based nanosponges. Besides, it is also used for smart targeting of tumors and for drug release in a sustainable pattern. Nanosponges can be prepared by simple methods. These can be tuned to release the drug by different routes so as to achieve the maximum benefits of the drug.

CONCLUSION

Huge amount of research has been carried out on nanosponges as drug carrier. The method of preparation and characterization of nanosponges are quite economical and routinely available. Owing to potential benefits and probable applications, these can be used as efficient carriers for certain drugs. The authors expect that the current review will guide the investigation of the nanosponges as nanodrug delivery systems.

Role of Nanotechnology in Taste Masking: Recent Updates

One of the important parameters in the case of dosage form is taste. Most of the drugs available in oral dosage form have an unpleasant taste which leads to patient incompliance and affects the success ratio of products in the market. Geriatric and paediatric patients suffer more with the bitter taste of medicines. According to the studies reported, it is found that 50% of the population have the problem swallowing tablets, especially the pediatric and geriatric population. Masking the taste of bitter drugs has become necessary in the pharmaceutical field and increasing interest of researchers to develop various methods for masking the bitter taste of drugs. Five major tastes, felt by our tongue are salt, sour, sweet, bitter, and umami. When the drug dissolves with saliva, drug molecules interact with taste receptors present on the tongue and give taste sensations. Although, many solid oral dosage forms like pills, and tablets have an additional advantage of masking and encapsulation of bitter taste drugs; however, they might not be effective for children because they may or may not swallow pills or tablets. There are various other methods that mask the bitter taste of drugs such as the addition of sweeteners and flavouring agents, granulation, coating, inclusion complexes, extrusion method, ion-exchange resins, etc, discussed in the first section of the article. The second part of this article consists of various nanotechnology-based drug delivery systems that were fabricated by researchers to mask the bitter taste of drugs. A brief of recent literature on various nanocarriers that were fabricated or developed for taste masking has been discussed in this part. A better understanding of these methods will help researchers and pharmaceutical industries to develop novel drug delivery systems with improved taste masking properties.

Preparation and Evaluation of Diosmin-Loaded Diphenylcarbonate-Cross-Linked Cyclodextrin Nanosponges for Breast Cancer Therapy

In the current study, diosmin (DSM)-loaded beta-cyclodextrin (β-CD)-based nanosponges (NSPs) using diphenylcarbonate (DPC) as a cross-linker were prepared. Four different DSM-loaded NSPs (D-NSP1-NSP4) were developed by varying the molar ratio of β-CD: DCP (1:15-1:6). Based on preliminary evaluations, NSPs (D-NSP3) were optimized for size (412 ± 6.1 nm), polydispersity index (PDI) (0.259), zeta potential (ZP) (-10.8 ± 4.3 mV), and drug loading (DL) (88.7 ± 8.5%), and were further evaluated by in vitro release, scanning electron microscopy (SEM), and in vitro antioxidant studies. The NSPs (D-NSP3) exhibited improved free radical scavenging activity (85.58% at 100 g/mL) compared to pure DSM. Dissolution efficiency (%DE) was enhanced to 71.50% (D-NSP3) from plain DSM (58.59%). The D-NSP3 formulation followed the Korsmeyer-Peppas kinetic model and had an n value of 0.529 indicating a non-Fickian and controlled release by diffusion and relaxation. The D-NSP3 showed cytotoxic activity against MCF-7 breast cancer, as evidenced by caspase 3, 9, and p53 activities. According to the findings, DSM-loaded NSPs might be a promising therapy option for breast cancer.

Emerging Role of Biopharmaceutical Classification and Biopharmaceutical Drug Disposition System in Dosage form Development: A Systematic Review

Biopharmaceutical classification system (BCS) is an advanced tool used for classifying medicines based on dissolution, water solubility, and intestinal permeability, which affect the absorption of active pharmaceutical ingredients (API) from immediate-release solid oral forms. It is useful to the formulation researchers to develop novel dosage forms based on modernistic rather than experimental approaches. The current review focuses on the fundamentals, objectives, guidance of BCS, characteristics of BCS drugs, their importance and applications of BCS. This review explains the challenges in drug development in terms of solubility and in vivo disposition. In the current review, new strategies for improving BCS II drug solubility as well as biopharmaceutical drug disposition properties which are utilized throughout the early stages of drug development and commercialization are mainly discussed.

A Current Overview of Cyclodextrin-Based Nanocarriers for Enhanced Antifungal Delivery

Fungal infections are an extremely serious health problem, particularly in patients with compromised immune systems. Most antifungal agents have low aqueous solubility, which may hamper their bioavailability. Their complexation with cyclodextrins (CDs) could increase the solubility of antifungals, facilitating their antifungal efficacy. Nanoparticulate systems are promising carriers for antifungal delivery due to their ability to overcome the drawbacks of conventional dosage forms. CD-based nanocarriers could form beneficial combinations of CDs and nanoparticulate platforms. These systems have synergistic or additive effects regarding improved drug loading, enhanced chemical stability, and enhanced drug permeation through membranes, thereby increasing the bioavailability of drugs. Here, an application of CD in antifungal drug formulations is reviewed. CD-based nanocarriers, such as nanoparticles, liposomes, nanoemulsions, nanofibers, and in situ gels, enhancing antifungal activity in a controlled-release manner and possessing good toxicological profiles, are described. Additionally, the examples of current, updated CD-based nanocarriers loaded with antifungal drugs for delivery by various routes of administration are discussed and summarized.

Quercitrin loaded cyclodextrin based nanosponge as a promising approach for management of lung cancer and COVID-19

Lung cancer and pandemic acute respiratory disease, COVID-19, are examples of the most worldwide widespread diseases. The aim of the current study is to develop cyclodextrin based nanosponge (CD-NS) for loading the flavonoid drug, quercitrin (QCT). This is to improve its solubility in an attempt to enhance its activity against lung cancer as well as SARS-CoV-2 virus responsible for COVID-19. Preparation of CD-NS was performed by ultrasound-assisted synthesis method. Two CDs were employed, namely, β cyclodextrin (βCD) and 2-hydroxy propyl-β-cyclodextrin (2-HPβCD) that were crosslinked with diphenyl carbonate, one at a time. QCT loaded CD-NS revealed entrapment efficiency and particle size ranged between 94.17 and 99.03% and 97.10–325.90 nm, respectively. QCT loaded 2-HPβCD-NS revealed smaller particle size compared with that of QCT loaded βCD-NS. Zeta potential absolute values of the prepared formulations were >20 mV, indicating physically stable nanosystems. The selected formulations were investigated by Fourier transform infrared spectroscopy, X-ray powder diffraction and scanning electron microscopy which proved the formation of QCT loaded CD-NS exhibiting porous structure. QCT exhibited partial and complete amorphization in βCD-NS and 2-HPβCD-NS, respectively. In vitro release revealed an improved release of QCT from CD-NS formulations. The biological activity of free QCT and QCT loaded CD-NS was investigated against lung cancer cell line A549 as well as SARS-CoV-2 virus. The results revealed that IC₅₀ values of free QCT against lung cancer cell line A549 and SARS-CoV-2 were higher than those exhibited by QCT loaded CD-NS by 1.57–5.35 and 5.95–26.95 folds, respectively. QCT loaded 2-HPβCD-NS revealed enhanced in vitro release and superior biological activity compared with QCT loaded βCD-NS.

β-Cyclodextrin-Based Nanosponges Inclusion Compounds Associated with Gold Nanorods for Potential NIR-II Drug Delivery

This article describes the synthesis and characterization of two nanocarriers consisting of β-cyclodextrin-based nanosponges (NSs) inclusion compounds (ICs) and gold nanorods (AuNRs) for potential near-infrared II (NIR-II) drug-delivery systems. These nanosystems sought to improve the stability of two drugs, namely melphalan (MPH) and curcumin (CUR), and to trigger their photothermal release after a laser irradiation stimulus (1064 nm). The inclusion of MPH and CUR inside each NS was confirmed by field emission scanning electron microscopy (FE-SEM), Raman spectroscopy, Fourier transform infrared spectroscopy, (FT-IR) differential scanning calorimetry (DSC), transmission electron microscopy (TEM), and proton nuclear magnetic resonance (1H-NMR). Furthermore, the association of AuNRs with both ICs was confirmed by FE-SEM, energy-dispersive spectroscopy (EDS), TEM, dynamic light scattering (DLS), ζ-potential, and UV–Vis. Moreover, the irradiation assays demonstrated the feasibility of the controlled-photothermal drug release of both MPH and CUR in the second biological window (1000–1300 nm). Finally, MTS assays depicted that the inclusion of MPH and CUR inside the cavities of NSs reduces the effects on mitochondrial activity, as compared to that observed in the free drugs. Overall, these results suggest the use of NSs associated with AuNRs as a potential technology of controlled drug delivery in tumor therapy, since they are efficient and non-toxic materials.

β-Cyclodextrin-crosslinked synthetic neuropeptide Y-based nanosponges in epilepsy by contributing GABAergic signal

Neuropeptide Y (NPY) is a polypeptide sequence useful in regulating physiological functions like homeostasis, feeding, etc., but its usage is restricted due to its short half-life. β-cyclodextrin-crosslinked nanosponges improve the drug release and stability due to its wide cavity, which is helpful to deliver therapeutics. The present work aimed to formulate synthetic NPY-based nanocarriers as sponges by polymer condensation mechanism using design experiment to improve the peptide release and stability. The validated nanosponges exhibited a particle size of 423.42 ± 5.32 nm, 75.82 ± 7.43 % entrapment efficiency and 83.50 ± 6.54 % NPY release for 24 h. The NPY and β-cyclodextrin interaction was confirmed by X-ray diffraction, Fourier transform infrared and nuclear magnetic resonance spectroscopy. The NPY-loaded nanosponges were found stable for 6 months at two conditions (5 ± 2 °C and 25 ± 2 °C). The cross-linked nanocarriers of synthetic peptide-based nanosponges powder at different doses were administered intranasally using a metered-dose inhaler in the animal model to check its antiepileptic activity. The synthetic NPY-loaded nanosponges at higher doses showed significant antiepileptic effects equivalent to the standard drug (administered orally) in maximal electroshock and chemically-induced seizures with an increase of NPY in the brain directly proportional to GABAergic signalling by increase in GABA levels resulting in convulsions attenuation.

Preparation and Evaluation of a Microsponge Dermal Stratum Corneum Retention Drug Delivery System for Griseofulvin

Griseofulvin (GF) is used as an antifungal to treat superficial skin fungal infections such as tinea capitis and tinea pedis. Currently, GF is only available in traditional oral dosage forms and suffers from poor and highly variable bioavailability, hepatotoxicity, and long duration of treatment. Therefore, the main objective of this study was to reduce the side effects of the drug and to increase the concentration of the drug retained in the cutaneous stratum corneum (SC) and improve its efficacy through the preparation of drug-laden GF microsponge (GFMS). The emulsification-solvent-diffusion method was used to prepare GFMS, and the prescriptions were screened by a single-factor approach. The optimized formulation (GFF8) had a microsponge particle size (μm) of 28.36 ± 0.26, an encapsulation efficiency (%) of 87.53 ± 1.07, a yield (%) of 86.58 ± 0.42, and drug release (%) from 77.57 ± 3.88. The optimized microsponge formulation was then loaded into a Carbopol 934 gel matrix and skin retention differences between the microsponge gel formulation and normal gels were examined by performing skin retention and fluorescence microscopy tests. Finally, the hepatoprotective and cutaneous stratum corneum retention abilities of microsponge gel formulations compared to oral GF formulations were assessed by hepatotoxicity, pharmacokinetics, and tissue distribution studies. This provides a new perspective on GF dermal stratum corneum retention administration.

Nanosponges for Drug Delivery and Cancer Therapy: Recent Advances

Nanosponges with three-dimensional (3D) porous structures, narrow size distribution, and high entrapment efficiency are widely engineered for cancer therapy and drug delivery purposes. They protect the molecular agents from degradation and help to improve the solubility of lipophilic therapeutic agents/drugs with targeted delivery options in addition to being magnetized to attain suitable magnetic features. Nanosponge-based delivery systems have been applied for cancer therapy with high specificity, biocompatibility, degradability, and prolonged release behavior. In this context, the drug loading within nanosponges is influenced by the crystallization degree. Notably, 3D printing technologies can be applied for the development of novel nanosponge-based systems for biomedical applications. The impacts of polymers, cross-linkers, type of drugs, temperature, loading and mechanism of drug release, fabrication methods, and substitution degree ought to be analytically evaluated. Eco-friendly techniques for the manufacturing of nanosponges still need to be uncovered in addition to the existing methods, such as solvent techniques, ultrasound-assisted preparation, melting strategies, and emulsion solvent diffusion methods. Herein, the recent advancements associated with the drug delivery and cancer therapy potential of nanosponges (chiefly, cyclodextrin-based, DNAzyme, and ethylcellulose nanosponges) are deliberated, focusing on the important challenges and future perspectives.

Versatile Applications of Nanosponges in Biomedical Field: A Glimpse on SARS-CoV-2 Management

Nanotechnology has a versatile use in the field of disease therapy, targeted drug delivery, biosensing, and environmental protection. The cross-linked nanosponges are one of the types of nanostructures that provide huge application in the biomedical field. They are available up to the fourth generation and can act as a payload for both kinds of hydrophilic and hydrophobic drugs. There are different methods available for the synthesis of these nanosponges as well as loading the drugs inside them. A variety of approved drugs based on nanosponges are already in the market including drugs for cancer. Other applications include the uses of nanosponges as topical agent, in improving solubility, as protein carrier, in chemical sensors, in wastewater remediation, and in agriculture. The present review discusses in detail about different applications of nanosponges and also mentions about the recent SARS-CoV-2 management using nanosponges.

Nutraceutical Concepts and Dextrin-Based Delivery Systems

Nutraceuticals are bioactive or chemical compounds acclaimed for their valuable biological activities and health-promoting effects. The global community is faced with many health concerns such as cancers, cardiovascular and neurodegenerative diseases, diabetes, arthritis, osteoporosis, etc. The effect of nutraceuticals is similar to pharmaceuticals, even though the term nutraceutical has no regulatory definition. The usage of nutraceuticals, to prevent and treat the aforementioned diseases, is limited by several features such as poor water solubility, low bioavailability, low stability, low permeability, low efficacy, etc. These downsides can be overcome by the application of the field of nanotechnology manipulating the properties and structures of materials at the nanometer scale. In this review, the linear and cyclic dextrin, formed during the enzymatic degradation of starch, are highlighted as highly promising nanomaterials- based drug delivery systems. The modified cyclic dextrin, cyclodextrin (CD)-based nanosponges (NSs), are well-known delivery systems of several nutraceuticals such as quercetin, curcumin, resveratrol, thyme essential oil, melatonin, and appear as a more advanced drug delivery system than modified linear dextrin. CD-based NSs prolong and control the nutraceuticals release, and display higher biocompatibility, stability, and solubility of poorly water-soluble nutraceuticals than the CD-inclusion complexes, or uncomplexed nutraceuticals. In addition, the well-explored CD-based NSs pathways, as drug delivery systems, are described. Although important progress is made in drug delivery, all the findings will serve as a source for the use of CD-based nanosystems for nutraceutical delivery. To sum up, our review introduces the extensive literature about the nutraceutical concepts, synthesis, characterization, and applications of the CD-based nano delivery systems that will further contribute to the nutraceutical delivery with more potent nanosystems based on linear dextrins.

Cyclodextrin-Based Nanosponges: Overview and Opportunities

Nanosponges are solid cross-linked polymeric nano-sized porous structures. This broad concept involves, among others, metal organic frameworks and hydrogels. The focus of this manuscript is on cyclodextrin-based nanosponges. Cyclodextrins are cyclic oligomers of glucose derived from starch. The combined external hydrophilicity with the internal hydrophobic surface constitute a unique "microenvironment", that confers cyclodextrins the peculiar ability to form inclusion host‒guest complexes with many hydrophobic substances. These complexes may impart beneficial modifications of the properties of guest molecules such as solubility enhancement and stabilization of labile guests. These properties complemented with the possibility of using different crosslinkers and high polymeric surface, make these sponges highly suitable for a large range of applications. Despite that, in the last 2 decades, cyclodextrin-based nanosponges have been developed for pharmaceutical and biomedical applications, taking advantage of the nontoxicity of cyclodextrins towards humans. This paper provides a critical and timely compilation of the contributions involving cyclodextrins nanosponges for those areas, but also paves the way for other important applications, including water and soil remediation and catalysis.

The ascension of nanosponges as a drug delivery carrier: preparation, characterization, and applications

Nanosponges are nanosized drug carriers with a three-dimensional structure created by crosslinking polymers. They have the advantage of being able to hold a wide range of drugs of various sizes. Nanosponges come in a variety of shapes and sizes. They are distinguished by the research method used, the type of polymer used, and the type of drug they may contain. Nanosponges are superior to other delivery systems because they can provide a controlled drug release pattern with targeted drug delivery. The period of action, as well as the drug's residence time, may be regulated. Since it is made of biodegradable materials, it has a low toxicity and is safe to use. The efficiency of drug encapsulation is determined by the size of the drug molecule and the amount of void space available. Cancer, enzyme and biocatalyst carrier, oxygen delivery, solubility enhancement, enzyme immobilization, and poison absorbent are some of the applications for nanosponges. The method of preparation, characterization, factors affecting nanosponge development, drug loading and release mechanism, recent developments in this area, and patents filed in the area of nanosponges are all highlighted in this study. Graphical abstract.

Nanocarrier Systems in Taste Masking

Taste is the most crucial organoleptic parameter affecting patient compliance in the case of drugs with poor palatability. Taste masking is a major challenge for the development of orally ingested active pharmaceutical constituents in the pharmaceutical industry. Numerous conventional taste-masking techniques have been extensively studied. In parallel, affecting the drug solubility or release is a major concern of conventional taste-masking techniques. Recently, many nanocarrier systems have been introduced, claiming the advantage of effective taste masking without affecting either the drug solubility or its release. In this review, we will present new techniques for taste masking, including taste-masking techniques utilizing nanocarrier systems such as liposomes, polymeric and solid lipid nanoparticles, polymeric micelles, submicron lipid emulsions, and nanogels. We will chiefly highlight the composition of these systems and their applications in designing oral therapeutic delivery systems successful in masking the taste of bitter molecules.

β-cyclodextrin and its derivatives: application in wastewater treatment

Water is one of the basic necessities of life and having clean water is extremely important for human health. In recent years, β-cyclodextrin (β-CD)-based polymers and nanosystems have been extensively studied as adsorbents for the purpose of water purification. They present high efficiency and capability to remove inorganic, organic, and heavy metal impurities from wastewater as compared to conventional methods of water purification. β-CDs are cyclic polysaccharides having specific dimension of hydrophobic cavities and hydrophilic functional groups. The hydrophobic cavities form inclusion complexes through host-guest interactions. The hydroxyl groups form sites of hydrogen bonding and electrostatic interaction with pollutants. Additionally, they are also the sites of modification to bring about different derivatisation and polymerization reactions in order to impart desirable properties for efficient adsorption material. This article comprises of various derivatives of β-cyclodextrins: their nanoparticulate systems and their characterization and applications to remove different types of impurities from wastewater. The chemical reactions for their synthesis and mechanism of adsorption are highlighted.

Polycaprolactone and polycaprolactone triol blends to obtain a stable liquid nanotechnological formulation: synthesis, characterization and in vitro - in vivo taste masking evaluation

The use of polymeric blends is a potential strategy to obtain novel nanotechnological formulations aiming at drug delivery systems. Saquinavir, an antiretroviral drug, was chosen as a model drug for the development of new stable liquid formulations with unpleasant taste masking properties. Three formulations containing different polymeric ratios (1:3, 1:1 and 3:1) were prepared and properly characterized by particle size distribution, zeta potential, pH, drug content and encapsulation efficiency measurements. The stability was verified by monitoring the zeta potential, particle size distribution, polydispersity index and drug content by 90 days. The light backscattering analysis was used to early identify possible phenomena of instability in the formulations. The in vitro drug release and saquinavir cytotoxicity were evaluated. The in vitro and in vivo taste masking properties were studied using an electronic tongue and a human sensory panel. All formulations presented nanometric sizes around 200 nm and encapsulation efficiency above 99%. The parameters evaluated for stability remained constant throughout 90 days. The in vitro tests showed a controlled drug release and absence of toxic effects on human T lymphocytes. The electronic tongue experiment showed taste differences for all formulations in comparison to drug solutions, with a more pronounced difference for the formulation with higher polycaprolactone content (3:1). This formulation was chosen for in vivo sensory panel evaluation which results corroborated the electronic tongue experiments. In conclusion, the polymer blend nanoformulation developed herein showed the promising application to incorporate drugs aiming at pharmaceutical taste-masking properties.

Fabrication and Biological Assessment of Antidiabetic α-Mangostin Loaded Nanosponges: In Vitro, In Vivo, and In Silico Studies

Type 2 diabetes mellitus has been a major health issue with increasing morbidity and mortality due to macrovascular and microvascular complications. The urgent need for improved methods to control hyperglycemic complications reiterates the development of innovative preventive and therapeutic treatment strategies. In this perspective, xanthone compounds in the pericarp of the mangosteen fruit, especially α-mangostin (MGN), have been recognized to restore damaged pancreatic β-cells for optimal insulin release. Therefore, taking advantage of the robust use of nanotechnology for targeted drug delivery, we herein report the preparation of MGN loaded nanosponges for anti-diabetic therapeutic applications. The nanosponges were prepared by quasi-emulsion solvent evaporation method. Physico-chemical characterization of formulated nanosponges with satisfactory outcomes was performed with Fourier transform infra-red (FTIR) spectroscopy, differential scanning calorimetry (DSC), and scanning electron microscopy (SEM). Zeta potential, hydrodynamic diameter, entrapment efficiency, drug release properties, and stability studies at stress conditions were also tested. Molecular docking analysis revealed significant interactions of α-glucosidase and MGN in a protein-ligand complex. The maximum inhibition by nanosponges against α-glucosidase was observed to be 0.9352 ± 0.0856 µM, 3.11-fold higher than acarbose. In vivo studies were conducted on diabetic rats and plasma glucose levels were estimated by HPLC. Collectively, our findings suggest that MGN-loaded nanosponges may be beneficial in the treatment of diabetes since they prolong the antidiabetic response in plasma and improve patient compliance by slowly releasing MGN and requiring less frequent doses, respectively.

Formulation Development, In Vitro and In Vivo Evaluation of Topical Hydrogel Formulation of Econazole Nitrate-Loaded β-Cyclodextrin Nanosponges

Econazole nitrate, an antifungal drug used in the handling of skin ailments, is commercially not efficient as these ailments typically require a more elevated concentration of the drug to offer an effective pharmacological retort. Like so, it is proposed to assess the effectiveness of the topical hydrogel of econazole-loaded nanosponge in the management of skin ailment(s). Econazole nitrate-laden β-cyclodextrin nanosponges were developed by employing the melt method using β-cyclodextrin as the organic polymer and N,N-carbonyldiimidazole as the crosslinker. The critical factors disturbing the quality of the formulation were uniquely identified by the Ishikawa diagram, and they were optimized by the statistical experiment design concept. β-cyclodextrin loaded nanosponges were uniquely designed using the Placket-Burman approach and optimized utilizing the Box-Behnken method. The optimized nanosponges (EN-CDN) were  421.37 ± 6.19 nm in size with an entrapment efficiency of 70.13% ± 5.73%. The topical hydrogel of nanosponges (EN-TG) was prepared using carbopol 934 and pyrrolidone as permeation enhancers. In vitro skin permeation studies affirmed the improved transport crosswise the goatskin for topical hydrogel in comparison to the marketed product. EN-TG was able to control the fungal infection in the selected animal model in comparison to the marketed preparation. Stability studies reported favorably that nanogel remained stable under normal and accelerated settings.

Current Status of Pediatric Formulations for Chronic and Acute Children' Diseases: Applications and Future Perspectives

Infants and other children can be affected by various acute, chronic and many of them rare illnesses. Developing drugs for children is very challenging since they cannot intake tablets or hard oral solid dosage forms. Besides, most of the prescribed pediatric medications are unlicensed. The biggest issue that clinicians have to solve is that dosing in children is not based on weight or surface area of the body, as it happened in adults but is related to age variations in drug absorption, distribution, metabolism, and elimination. Thus, for pediatric patients, various therapeutic approaches have been proposed so as to develop suitable formulations such as liquid dosage forms, flexible capsules, milk-based products, etc. In addition, the administration of current pharmaceutical products to children might lead to some serious side effects which can also happen in adults but with a lower risk. Especially, infants are at high risk of getting poisoned by taking drugs used for adults. Moreover, children are very sensitive to the taste and smell of some pharmaceutical vehicles and can resist to intake them and this situation leads parents to search for tasteless and odorless medications. In this study, the current formulations for various diseases intended to be used in pediatric patients as well as various chronic and acute diseases of childhood are summarized. Authors believe that this review can help professionals who want to work with pediatric formulations to design more efficient and child-friendly drug delivery systems.

Cyclodextrin Nanosponges Inclusion Compounds Associated with Gold Nanoparticles for Potential Application in the Photothermal Release of Melphalan and Cytoxan

This article describes the synthesis and characterization of β-cyclodextrin-based nano-sponges (NS) inclusion compounds (IC) with the anti-tumor drugs melphalan (MPH) and cytoxan (CYT), and the addition of gold nanoparticles (AuNPs) onto both systems, for the potential release of the drugs by means of laser irradiation. The NS-MPH and NS-CYT inclusion compounds were characterized using scanning electron microscopy (SEM), X-ray powder diffraction (XRPD), energy dispersive spectroscopy (EDS), thermogravimetric analysis (TGA), UV-Vis, and proton nuclear magnetic resonance (1H-NMR). Thus, the inclusion of MPH and CYT inside the cavities of NSs was confirmed. The association of AuNPs with the ICs was confirmed by SEM, EDS, TEM, and UV-Vis. Drug release studies using NSs synthesized with different molar ratios of β-cyclodextrin and diphenylcarbonate (1:4 and 1:8) demonstrated that the ability of NSs to entrap and release the drug molecules depends on the crosslinking between the cyclodextrin monomers. Finally, irradiation assays using a continuous laser of 532 nm showed that photothermal drug release of both MPH and CYT from the cavities of NSs via plasmonic heating of AuNPs is possible.

Formulation and in vitro evaluation of topical nanosponge-based gel containing butenafine for the treatment of fungal skin infection

In the current study, four formulae (BNS1-BNS4) of butenafine (BTF) loaded nanosponges (NS) were fabricated by solvent emulsification technology, using different concentration of ethyl cellulose (EC) and polyvinyl alcohol (PVA) as a rate retarding polymer and surfactant, respectively. Prepared NS were characterized for particle size (PS), polydispersity index (PDI), zeta potential (ZP), entrapment efficiency (EE) and drug loading (DL). Nanocarrier BNS3 was optimized based on the particle characterizations and drug encapsulation. It was further evaluated for physicochemical characterizations; FTIR, DSC, XRD and SEM. Selected NS BNS3 composed of BTF (100 mg), EC (200 mg) and 0.3% of PVA showed, PS (543 ± 0.67 nm), PDI (0.330 ± 0.02), ZP (-33.8 ± 0.89 mV), %EE (71.3 ± 0.34%) and %DL (22.8 ± 0.67%), respectively. Fabricated NS also revealed; polymer-drug compatibility, drug-encapsulation, non-crystalline state of the drug in the spherical NS as per the physicochemical evaluations. Optimized NS (BNS3) with equivalent amount of (1%, w/w or w/v) BTF was incorporated into the (1%, w/w or w/v) carbopol gel. BTF loaded NS based gel was then evaluated for viscosity, spreadability, flux, drug diffusion, antifungal, stability and skin irritation studies. BNS3 based topical gels exhibited a flux rate of 0.18 (mg/cm2.h), drug diffusion of 89.90 ± 0.87% in 24 h with Higuchi model following anomalous non-Fickian drug release. The BNS3 based-gel could be effective against pathogenic fungal strains.

β-Cyclodextrin-Based Nanosponges Functionalized with Drugs and Gold Nanoparticles

Drugs are widely used as therapeutic agents; however, they may present some limitations. To overcome some of the therapeutic disadvantages of drugs, the use of β-cyclodextrin-based nanosponges (βCDNS) constitutes a promising strategy. βCDNS are matrices that contain multiple hydrophobic cavities, increasing the loading capacity, association, and stability of the included drugs. On the other hand, gold nanoparticles (AuNPs) are also used as therapeutic and diagnostic agents due to their unique properties and high chemical reactivity. In this work, we developed a new nanomaterial based on βCDNS and two therapeutic agents, drugs and AuNPs. First, the drugs phenylethylamine (PhEA) and 2-amino-4-(4-chlorophenyl)-thiazole (AT) were loaded on βCDNS. Later, the βCDNS-drug supramolecular complexes were functionalized with AuNPs, forming the βCDNS-PhEA-AuNP and βCDNS-AT-AuNP systems. The success of the formation of βCDNS and the loading of PhEA, AT, and AuNPs was demonstrated using different characterization techniques. The loading capacities of PhEA and AT in βCDNS were 90% and 150%, respectively, which is eight times higher than that with native βCD. The functional groups SH and NH2 of the drugs remained exposed and allowed the stabilization of the AuNPs, 85% of which were immobilized. These unique systems can be versatile materials with an efficient loading capacity for potential applications in the transport of therapeutic agents.

Inclusion Complexes of Non-Steroidal Anti-Inflammatory Drugs with Cyclodextrins: A Systematic Review

Non-steroidal anti-inflammatory drugs (NSAIDs) are one of the most widely used classes of medicines in the treatment of inflammation, fever, and pain. However, evidence has demonstrated that these drugs can induce significant toxicity. In the search for innovative strategies to overcome NSAID-related problems, the incorporation of drugs into cyclodextrins (CDs) has demonstrated promising results. This study aims to review the impact of cyclodextrin incorporation on the biopharmaceutical and pharmacological properties of non-steroidal anti-inflammatory drugs. A systematic search for papers published between 2010 and 2020 was carried out using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) protocol and the following search terms: “Complexation”; AND “Cyclodextrin”; AND “non-steroidal anti-inflammatory drug”. A total of 24 different NSAIDs, 12 types of CDs, and 60 distinct inclusion complexes were identified, with meloxicam and β-CD appearing in most studies. The results of the present review suggest that CDs are drug delivery systems capable of improving the pharmacological and biopharmaceutical properties of non-steroidal anti-inflammatory drugs.