Worldwide actions against plastic pollution from microbeads and microplastics in cosmetics focusing on European policies. Has the issue been handled effectively?

Photodegradation Controls of Potential Toxicity of Secondary Sunscreen-Derived Microplastics and Associated Leachates

The escalating environmental concern over secondary microplastics (SMPs) stems from their physicochemical evolution from primary microplastics (PMPs), yet the contribution of varying physicochemical transformations to the ultimate environmental risks remains unknown. In this study, a photomechanical degradation process was employed to convert the primary sunscreen-derived microplastics (SDMPs) into secondary SDMPs. While mechanical degradation caused physical fragmentation, photodegradation induced both physical and chemical alterations, introducing surface oxidation, chemical bond scission, and cross-linking to the secondary SDMPs. Employing a combination of alkaline digestion and pyrolysis GC-MS techniques, it was observed that both physical fragmentation and photooxidation led to heightened intracellular sequestration of MPs. Although the bioaccumulated SDMPs could be indicated by the enlarged lysosomes and fragmented mitochondria, toxicity of secondary SDMPs at the cellular level was primarily driven by chemical transformations post-photodegradation. A nontargeted analysis employing high-resolution mass spectrometry identified 46 plastic-associated compounds in the leachate, with photodegradation-induced chemical transformations playing a crucial role in the dissociation of hydrophobic additives and oxidative conversion of leached compounds. The toxicity of the leachate was exacerbated by photodegradation, with mitochondrial fragmentation serving as the primary subcellular biomarker, indicative of leachate toxicity. This study elucidates the pivotal role of photodegradation in augmenting the cytotoxicity of secondary SDMPs, shedding light on the intricate interplay between physicochemical transformations and environmental risks.

Mitigating the environmental effects of healthcare: the role of the endocrinologist

Human health depends on planetary health, and yet healthcare provision can have unintended consequences for the health of the planet. Emissions from the healthcare sector include greenhouse gases, air pollution and plastic pollution, alongside chemical contamination. Chemical pollution resulting in endocrine disruption has been associated with plastics, which are a source of concerning additives such as phthalates, bisphenols, perfluoroalkyl and polyfluoroalkyl substances, and flame retardants (all routinely found in healthcare products). Many endocrine-disrupting chemicals are persistent and ubiquitous in the environment (including water and food sources), with potential secondary harms for human health, including disrupting reproductive, metabolic and thyroid function. Here we review evidence-based strategies for mitigating environmental effects of healthcare delivery. We focus on what endocrinologists can do, including reducing demand for healthcare services through better preventative health, focusing on high-value care and improving sustainability of medical equipment and pharmaceuticals through adopting circular economy principles (including reduce, reuse and, as a last resort, recycle). The specific issue of endocrine-disrupting chemicals might be mitigated through responsible disposal and processing, alongside advocating for the use of alternative materials and replacing additive chemicals with those that have lower toxicity profiles, as well as tighter regulations. We must work to urgently transition to sustainable models of care provision, minimizing negative effects on human and planetary health.

A review on microplastic fibers and beads in wastewater: The current knowledge on their occurrence, analysis, treatment, and insights on human exposure impact

The persistent presence of microplastic (MP) pollution in conventional wastewater treatment plants (WWTPs) is observed worldwide as they are currently not designed to remove MPs effectively. This pollution eventually re-enters and circulate in the environment, elevating the risks posed to ecosystems and organisms through biotoxicity and ecological destabilization. The most common MP shape in wastewater are microfibers (MFs) yet focused comprehensive studies on MFs is limited. Although not as abundant as MFs, microbeads (MBs) are also an important shape in WWTPs as they were among the first shapes to be targeted for production regulation, highlighting their significant impacts. Targeting these specific shapes are crucial as they represent the foundational components of wastewater MP pollution, and the current lack of these studies hinders our ability to address MP persistence and mitigation and management strategies properly. Therefore, this review aims to present the most up-to-date information on the distribution of MFs and MBs across WWTPs. Specifically, the source, detection, and analysis of MFs and MBs in wastewater, physicochemical characterization and interactions of common MF/MB polymers, and the current efforts to mitigate the production and release of these shaped MPs are summarized. This is the first literature review to focus on MFs and MBs in the aspects of their source, human toxicity, detection, and analysis in wastewater.

Polyacrylic acid-based nanoplastics used in cosmetics: a study of biodegradability and effects on heterotrophic and nitrifying microorganisms in the activated sludge

Nanoplastics, commonly used in cosmetics, enter wastewater systems and interact with activated sludge, yet their effects on microorganisms, essential for wastewater treatment, remain poorly understood. The aim of this study was to investigate the effects of polyacrylic acid-based nanoplastics (PANPs) on microorganisms in activated sludge. The PANPs were characterized in terms of their material composition, size, zeta potential, and additive content. Acute (30 min) and prolonged (up to 6 h) toxicity tests were performed to evaluate negative effects on heterotrophic and nitrifying microorganisms in activated sludge. In addition, ready and inherent biodegradability tests were performed to assess their degradation in the environment and within wastewater treatment plants, respectively. The results showed a significant acute inhibition of heterotrophic and nitrifying activity (up to 55 and 72%, respectively) at the highest concentration tested (100 mg/L, 30 min), primarily attributed to the presence of 1-dodecanol detected in the PANPs. This effect decreased with prolonged exposure, likely due to the volatilization of 1-dodecanol. Nevertheless, the PANPs were found to be non-biodegradable in both the ready and inherent biodegradability tests. Although PANPs do not appear to pose a long-term threat to the activated sludge, their persistence in the environment raises concerns about possible accumulation.

Unveiling the duality of cement and concrete addressing microplastic pollution: a review

Microplastic pollution has emerged as a global environmental concern, with diverse consequences for ecosystems and human health. While the focus has primarily been on the sources and impacts of microplastics, this review paper explores the roles of cement and concrete in potentially mitigating microplastic pollution and addressing their negative impacts with the focus of 165 relevant publications. Cementitious materials, widely used in construction, have unique properties that greatly increase the formation and transport of microplastics in the environment, and affect circular economy practice. This paper gathers all the information we already know about how cement, concrete, and microplastics interact with each other. It also presents the potential opportunities and challenges of using these materials to deal with microplastic pollution, entailing the advancement of porous concrete as a filtering system, exploration of concrete wetting phenomena based on concrete's surface chemistry and characteristics, proper urban water management systems for concrete green spaces, assessment of innovative technologies with concrete for microplastic mitigation, and the formation of standards and guidelines such as precise Life Cycle Assessment (LCA) tools, environmental product declaration (EPD), policy for urban planning, and green finance paradigms.

Impact of plastic pollution on ecosystems: a review of adverse effects and sustainable solutions

The primary source of the growing concern regarding marine, aquatic, and land pollution is plastic products, the majority of which are made of synthetic or semi-synthetic organic compounds. These combinations include materials like coal and natural gas that are obtained through petrochemical processes. As these two types of plastic-derived products are produced and disposed of, they have a major impact on the ecosystems. According to recent figures, around 400 million tons of plastic and related products derived from plastic are produced annually, and it became double in the last two decades. Plastic pollutants are introduced into ecosystems by a variety of stakeholders at different points in their daily lives, whether intentionally or accidentally. They have become a major source of adverse effects, toxicity development in natural entities, and problems. The aquatic, marine, and land ecosystems are vital to human existence, which emphasizes how difficult it is to stop pollution from it. This review highlights the adverse impacts of plastics, plastic-based products, and micro-nanoplastics on aquatic, terrestrial, and marine ecosystems while addressing advances in biodegradable plastics, recycling innovations, plastic-degrading enzymes, and sustainable solutions to reduce environmental risks.

What Gastroenterologists Should Know About Microplastics and Nanoplastics

Global production and widespread use of plastics are increasing dramatically. With current limited recycling and recovery options, microplastics and nanoplastics (MNPs) persist in the natural environment. Due to their ubiquity, human exposure to MNPs is inevitable. In addition to their inherent toxic effects, MNPs can adsorb harmful contaminants and act as vectors for microorganisms, compounding toxicological effects. After entering the body, bioaccumulation occurs in several tissues and organs, including the liver and the gastrointestinal (GI) tract. Proposed clinical effects of MNP absorption include endocrine disruption, alteration of the GI microbiome, and promotion of chronic inflammatory conditions. MNPs can also influence energy metabolism, activate inflammatory pathways, and increase oxidative stress leading to apoptosis. The GI tract is a major site of bioaccumulation for the MNPs in animals and humans. In this editorial, the current understanding of how MNPs are processed is discussed. Discussion on MNP effects on internal microflora, and their proposed role in developing inflammatory bowel diseases, MNP toxicokinetics, and their significance in health and disease are also reviewed. There is a need to understand the impact of MNP exposure on gut health and gut microbiota and identify current research gaps.

The microplastic menace: a critical review of its impact on marine photoautotrophs and their environment

Seaweeds contribute to the energy input in marine communities and affect the chemical makeup, species composition, nutrient availability, pH, and seawater oxygen levels. However, the annual introduction of 28.5 million tons of plastic waste into oceans makes up 85% of marine litter, which is expected to grow fourfold in the next 25 years, causing a rise in concern for human health and the environment. Microplastics are small plastic particles of 1-5 mm that are either manufactured or formed due to the degradation of large plastic materials. This study analyzes the prevalence of microplastics in marine environments, their interaction with marine macro- and microalgae, environmental implications, genetic responses to microplastic exposure, and potential strategies for mitigating microplastic pollution. The leading causes identified were high plastic production rate (390 million tons annually), increased usage, inefficient waste management, meager recycling (9% is recycled), slow degradation (up to 1200 years), easy distribution via oceanic currents, and industrialization that has led to the accumulation of microplastics in the marine ecosystems. Therefore, it is recommended that the waste management system be strengthened, focusing on recycling, repurposing, reducing single-use plastics, and redirecting plastic waste away from water bodies. Developing reliable detection technologies, studying the long-term effects of microplastics in marine ecosystems, and collaborating with the public and private sectors may be encouraged. Further investigations on microplastic-seaweed interaction, the bioremediation potential of various species, and the involved molecular mechanisms may lead to new strategies for reducing microplastic loads in marine ecosystems.

Recent advances in mechanistic insights into microplastics mitigation strategies via emerging advanced oxidation processes: Legislation, challenges, and future direction

Microplastics (MPs) pollution has emerged as a global environmental concern due to its detrimental impacts on ecosystems. Conventional wastewater/water treatment methods are inadequate for MPs removal due to their diminutive size ranging from micrometers to nanometers. Advanced oxidation processes (AOPs) have gained attention as a promising green strategy for the efficient and safe elimination of MPs from aqueous systems. In recent years, various AOPs, including direct photo-degradation, photocatalytic oxidation, electrochemical oxidation, sono-chemical oxidation, ozonation, as well as sulfate radicals-based AOPs (SR-AOPs), and the use of hybrid systems have all been extensively investigated for MP elimination. However, the molecular mechanisms of MP polymer chain scission by AOPs have not been thoroughly studied so far. In this review, we have attempted to provide a thorough overview of molecular mechanisms and highlighted recent advances in the degradation of commonly used MP by AOPs. The characteristics and limitations of each technique are thoroughly examined. Additionally, current policies and legislation on plastic pollution are discussed, emphasizing the need for regulatory frameworks to support effective MPs mitigation strategies. To advance the practical application of AOPs for MPs removal, future research direction should address the transition from controlled laboratory environments to complex field conditions, assess the sustainability of AOPs in terms of catalytic material design, selection of effective oxidants, power consumption, and operational costs. Given these challenges, recommendations for future research directions are proposed based on knowledge gaps in the reported literature. This review could offer a coherent summary of the molecular mechanisms involved in different MP elimination techniques, aiding in the advancement of more dependable AOPs technology with superior removal and degradation efficiency.

Microbial strategies for effective microplastics biodegradation: Insights and innovations in environmental remediation

Microplastics (MPs), diminutive yet ubiquitous fragments arising from the degradation of plastic waste, pervade environmental matrices, posing substantial risks to ecological systems and trophic dynamics. This review meticulously examines the origins, distribution, and biological impacts of MPs, with an incisive focus on elucidating the molecular and cellular mechanisms underpinning their toxicity. We highlight the indispensable role of microbial consortia and enzymatic pathways in the oxidative degradation of MPs, offering insights into enhanced biodegradation processes facilitated by innovative pretreatment methodologies. Central to our discourse is the interplay between MPs and biota, emphasizing the detoxification capabilities of microbial metabolisms and enzymatic functions in ameliorating MPs' deleterious effects. Additionally, we address the practical implementations of MP biodegradation in environmental remediation, advocating for intensified research to unravel the complex biodegradation pathways and to forge effective strategies for the expeditious elimination of MPs from diverse ecosystems. This review not only articulates the pervasive challenges posed by MPs but also positions microbial strategies at the forefront of remedial interventions, thereby paving the way for groundbreaking advancements in environmental conservation.

Novel continuous in situ measurement of photocatalyst efficiency in liquid dispersions by laser absorption method

This work presents a novel method and reactor design for measuring photocatalytic activity. This method allows continuous in situ monitoring of the decrease in pollutant concentration in a liquid dispersion containing the tested photocatalyst. Due to the presence of the photocatalyst in the liquid dispersion, the standard Beer-Lambert absorption law cannot be used directly to determine pollutant concentration in photocatalytic measurements. Therefore, the presented in situ measurement method also utilizes a newly derived modification of the absorption law, which, in addition to absorption, also considers the scattering effect caused by the dispersed photocatalyst. Repeated correlation analysis showed an average deviation of only 1.04% from approximately 500 measurements. At the same time, the measured points obtained by the presented method were within the uncertainty intervals of the standard method for measuring photocatalytic activity. It has been demonstrated that this novel continuous in situ measurement method can replace the current standard measurement method and can provide an even more consistent and faster way of testing photocatalytic materials. In addition, a novel and open source (patented experimental setup for the photocatalytic reactor system, consisting of a spectrometric laser and probe, is fully described in this paper.

Microplastics in Cosmetics: Open Questions and Sustainable Opportunities

The cosmetic industry is now changing or rather having an ecological transition in which formulations such as creams, lotions, and powders for make-up, skin and hair care must not contain microplastics, now a taboo word in this field. Nowadays, many companies are intensifying their research and development (R&D) work to align with recent and future legislation that provides for their elimination to safeguard the ecosystem. The production of new eco-sustainable materials is currently a hot topic which finds its place in a market worth above 350 billion dollars which will reach more than 700 billion dollars in a very short time. This review offers an overview of the main advantages and adverse issues relating to the use of microplastics in cosmetics and of their impact, providing an insight into the properties of the polymeric materials that are currently exploited to improve the sensorial characteristics of cosmetic products. In addition, the various regulatory restrictions in the different geographical areas of the world are also described, which is matter for reflection on future direction. Finally, a prospective vision of possible solutions to replace microplastics with sustainable alternatives complete the picture of the next generation personal care products to support decision-making in the cosmetic marketplace.

Oxidation enhances the toxicity of polyethylene microplastics to mouse eye: Perspective from in vitro and in vivo

Microplastics (MPs) are ubiquitously dispersed in the environment, and undergoing the process of oxidation that alters their physical and chemical properties. Eyes, which directly interface with the external milieu, inevitably encounter MPs. Nonetheless, the ophthalmic toxicity of MPs towards organisms remains unclear. In this study, primary mouse corneal epithelial cells (MCECs), C57BL/6 mice, and CX3CrlGFP/+ mice were utilized to evaluate the toxicity and differences between oxidized low-density polyethylene MPs (modified-MPs) and low-density polyethylene MPs (virgin-MPs) on eyes. The results manifested that virgin-MPs and modified-MPs could be endocytosed by primary MCECs, resulting in a range of cellular damage. Furthermore, they could diminish tear secretion, increase intraocular pressure, and could be internalized into cornea and retina in mice, instigating a series of detrimental reactions. Importantly, modified-MPs exhibited heightened toxicity towards mouse eyes, seemingly due to oxidation enhances the interaction between virgin-MPs/modified-MPs and tissues/cells, and leading to the release of toxic substances increased. In conclusion, our discoveries demonstrate that oxidation exacerbates the harm of virgin-MPs to eyes, and are of great significance for evaluating the risk of MPs to ocular health.

Are we eating plastic? Science mapping of microplastic pollution in the aquatic food chain

This study evaluates the knowledge structure of microplastic pollution and its effects on the aquatic food chain. The presence of microplastics has seriously harmed the ecosystem. Through bibliometric analysis, 216 journal publications were retrieved from the Web of Science (WoS) from 2008 to 2023 (April), with no restriction in the time frame. Applying bibliographic coupling and co-word analysis, the emerging, current, and future themes of microplastic pollution are presented. Three research streams are derived from bibliographic coupling, centralized on the source of microplastic pollution and its impact. At the same time, research streams from co-word analysis are associated with overcoming the issue of microplastics in the ecosystem. This study's implications suggest three main principles to mitigate microplastic issues: (1) educating the public on the impact of microplastic pollution, (2) implementing holistic regulations and policies, and (3) developing treatment strategies through conventional, innovative, and hybrid approaches. Microplastic pollution is a global concern, requiring a holistic and comprehensive approach to overcome it. This review is the first to present a scientific mapping of the microplastics literature, which is a fundamental basis for future research on microplastic pollution and its impact on the ecosystem. Integr Environ Assess Manag 2024;20:1800-1811. © 2024 SETAC.

Microplastics: an often-overlooked issue in the transition from chronic inflammation to cancer

The presence of microplastics within the human body has raised significant concerns about their potential health implications. Numerous studies have supported the hypothesis that the accumulation of microplastics can trigger inflammatory responses, disrupt the microbiome, and provoke immune reactions due to their physicochemical properties. Chronic inflammation, characterized by tissue damage, angiogenesis, and fibrosis, plays a crucial role in cancer development. It influences cancer progression by altering the tumor microenvironment and impairing immune surveillance, thus promoting tumorigenesis and metastasis. This review explores the fundamental properties and bioaccumulation of microplastics, as well as their potential role in the transition from chronic inflammation to carcinogenesis. Additionally, it provides a comprehensive overview of the associated alterations in signaling pathways, microbiota disturbances, and immune responses. Despite this, the current understanding of the toxicity and biological impacts of microplastics remains limited. To mitigate their harmful effects on human health, there is an urgent need to improve the detection and removal methods for microplastics, necessitating further research and elucidation.

The alarming link between environmental microplastics and health hazards with special emphasis on cancer

Microplastic contamination is a burgeoning environmental issue that poses serious threats to animal and human health. Microplastics enter the human body through nasal, dermal, and oral routes to contaminate multiple organs. Studies have advocated the existence of microplastics in human breast milk, sputum, faeces, and blood. Microplastics can find their ways to the sub-cellular moiety via active and passive approaches. At cellular level, microplastics follow clathrin and caveolae-dependent pathways to invade the sub-cellular environment. These environmental contaminants modulate the epigenetic control of gene expression, status of inflammatory mediators, redox homeostasis, cell-cycle proteins, and mimic the endocrine mediators like estrogen and androgen to fuel carcinogenesis. Furthermore, epidemiological studies have suggested potential links between the exposure to microplastics and the onset of various chronic diseases. Microplastics trigger uncontrolled cell proliferation and ensue tissue growth leading to various cancers affecting the lungs, blood, breasts, prostate, and ovaries. Additionally, such contamination can potentially affect sub-cellular signaling and injure multiple organs. In essence, numerous reports have claimed microplastic-induced toxicity and tumorigenesis in human and model animals. Nonetheless, the underlying molecular mechanism is still elusive and warrants further investigations. This review provides a comprehensive analysis of microplastics, covering their sources, chemistry, human exposure routes, toxicity, and carcinogenic potential at the molecular level.

A comprehensive review of urban microplastic pollution sources, environment and human health impacts, and regulatory efforts

Microplastic (MP) pollution in urban environments is a pervasive and complex problem with significant environmental and human health implications. Although studies have been conducted on MP pollution in urban environments, there are still research gaps in understanding the exact sources, regulation, and impact of urban MP on the environment and public health. Therefore, the goal of this study is to provide a comprehensive overview of the complex pathways, harmful effects, and regulatory efforts of urban MP pollution. It discusses the research challenges and suggests future directions for addressing MPs related to environmental issues in urban settings. In this study, original research papers published from 2010 to 2024 across ten database categories, including PubMed, Google Scholar, Scopus, and Web of Science, were selected and reviewed to improve our understanding of urban MP pollution. The analysis revealed multifaceted sources of MPs, including surface runoff, wastewater discharge, atmospheric deposition, and biological interactions, which contribute to the contamination of aquatic and terrestrial ecosystems. MPs pose a threat to marine and terrestrial life, freshwater organisms, soil health, plant communities, and human health through ingestion, inhalation, and dermal exposure. Current regulatory measures for MP pollution include improved waste management, upgraded wastewater treatment, stormwater management, product innovation, public awareness campaigns, and community engagement. Despite these regulatory measures, several challenges such as; the absence of standardized MPs testing methods, MPs enter into the environment through a multitude of sources and pathways, countries struggle in balancing trade interests with environmental concerns have hindered effective policy implementation and enforcement. Addressing MP pollution in urban environments is essential for preserving ecosystems, safeguarding public health, and advancing sustainable development. Interdisciplinary collaboration, innovative research, stringent regulations, and public participation are vital for mitigating this critical issue and ensuring a cleaner and healthier future for urban environments and the planet.

Critical review on unveiling the toxic and recalcitrant effects of microplastics in aquatic ecosystems and their degradation by microbes

Production of synthetic plastic obtained from fossil fuels are considered as a constantly growing problem and lack in the management of plastic waste has led to severe microplastic pollution in the aquatic ecosystem. Plastic particles less than 5mm are termed as microplastics (MPs), these are pervasive in water and soil, it can also withstand longer period of time with high durability. It can be broken down into smaller particles and can be adsorbed by various life-forms. Most marine organisms tend to consume plastic debris that can be accumulated easily into the vertebrates, invertebrates and planktonic entities. Often these plastic particles surpass the food chain, resulting in the damage of various organs and inhibiting the uptake of food due to the accumulation of microplastics. In this review, the physical and chemical properties of microplastics, as well as their effects on the environment and toxicity of their chemical constituents are discussed. In addition, the paper also sheds light on the potential of microorganisms such as bacteria, fungi, and algae which play a pivotal role in the process of microplastics degradation. The mechanism of microbial degradation, the factors that affect degradation, and the current advancements in genetic and metabolic engineering of microbes to promote degradation are also summarized. The paper also provides information on the bacterial, algal and fungal degradation mechanism including the possible enzymes involved in microplastic degradation. It also investigates the difficulties, limitations, and potential developments that may occur in the field of microbial microplastic degradation.

Influence of algal-extracellular polymeric substances (EPS) on the pristine and combined toxicity of TiO2 NPs and PSNPs in Artemia salina: Eco-corona enhances the toxic effects

The study on the influence of Natural Organic Matter (NOM) over the individual and combined effects of different nanomaterials on marine species is pertinent. The current study explores the role of Extracellular Polymeric Substances (EPS) in influencing the individual and combined toxic effects of polystyrene nanoplastics (PSNPs) viz. aminated (NH2-PSNPs), carboxylated (COOH-PSNPs), and plain PSNPs and TiO2 NPs in the marine crustacean, Artemia salina. A. salina was interacted with pristine PSNPs, pristine TiO2 NPs, EPS incubated PSNPs, EPS incubated TiO2 NPs, binary mixture of PSNPs and TiO2 NPs, and EPS adsorbed binary mixture of PSNPs and TiO2 NPs for 48 h. The present study proves that, when compared to the pristine toxicity of PSNPs and TiO2 NPs, the coexposure of TiO2 NPs with PSNPs resulted in increased toxicity. The adsorption of algal EPS on the NMs (both in their pristine and combined forms) significantly increased the toxic nature of the NMs against A. salina. It was observed that with an increase in the hydrodynamic diameter of the particles, the mortality, oxidative stress, and ingestion of the NMs by A. salina increased. The uptake of Ti by A. salina from 8 mg/L TiO2 NPs, EPS adsorbed 8 mg/L TiO2 NPs, 8 mg/L TiO2 NPs + NH2-PSNPs and the EPS adsorbed mixture of 8 mg/L TiO2 NPs, 8 mg/L TiO2 NPs + NH2-PSNPs was observed to be 0.043, 0.047, 0.186, and 0.307 mg/g of A. salina. The adsorption of algal EPS on the NMs (both in their pristine and combined forms) significantly increased the toxic nature of the NMs against A. salina. The major outcomes from the current study highlight the role of EPS in exacerbating the toxicity of NMs in marine crustaceans.

Contamination by microplastics and sorbed organic pollutants in the surface waters of the Tietê River, São Paulo-SP, Brazil

Microplastics (MPs) are particles between 1 μm and 5 mm in size, originating mainly from poor solid waste and effluent management, that can reach water bodies from various sources. In freshwater environments, the occurrence, distribution, and characterization of this new class of pollutants are still little explored, especially in Brazil. The aim of this study was to assess the occurrence of MPs, as well as the presence and concentration of polychlorinated biphenyls (PCBs) sorbed to these particles in the surface waters of the Tietê River - SP. Surface water samples were collected in duplicate during the dry and wet seasons. The identification and characterization of the MPs was carried out through visual inspection and the chemical identity of the particles was verified using Fourier transform infrared spectroscopy with attenuated total reflectance (FTIR-ATR). For the analysis of PCBs adsorbed to the MPs, the sample extracts were analyzed by gas chromatography coupled with mass spectrometry (GC-MS). The MPs were found in concentrations ranging from 6.67 to 1530 particles m-3, with a predominance of the polymers polyethylene (PE, with 58.17 %) and polypropylene (PP, with 23.53 %). The main morphological categories identified were fragments (56.63 %), fibers (28.42 %), and transparent films (13.06 %). Higher abundances of PCBs were observed in the lower size range, between 0.106 and 0.35 mm. The total concentrations of PCBs in MPs ranged from 20.53 to 133.12 ng g-1. The results obtained here are relevant for understanding the dynamics and level of contamination of MPs and organic pollutants sorbed to these particles in the Tietê River, as well as helping with mitigation measures for the restoration and preservation of this ecosystem.

Current Challenges in Microcapsule Designs and Microencapsulation Processes: A Review

Microencapsulation is an advanced methodology for the protection, preservation, and/or delivery of active materials in a wide range of industrial sectors, such as pharmaceuticals, cosmetics, fragrances, paints, coatings, detergents, food products, and agrochemicals. Polymeric materials have been extensively used as microcapsule shells to provide appropriate barrier properties to achieve controlled release of the encapsulated active ingredient. However, significant limitations are associated with such capsules, including undesired leaching and the nonbiodegradable nature of the typically used polymers. In addition, the energy cost of manufacturing microcapsules is an important factor to be considered when designing microcapsule systems and the corresponding production processes. Recent factors linked to UN sustainability goals are modifying how such microencapsulation systems should be designed in pursuit of "ideal" microcapsules that are efficient, safe, cost-effective and environmentally friendly. This review provides an overview of advances in microencapsulation, with emphasis on sustainable microcapsule designs. The key evaluation techniques to assess the biodegradability of microcapsules, in compliance with recently evolving European Union requirements, are also described. Moreover, the most common methodologies for the fabrication of microcapsules are presented within the framework of their energy demand. Recent promising microcapsule designs are also highlighted for their suitability toward meeting current design requirements and stringent regulations, tackling the ongoing challenges, limitations, and opportunities.

Primary Microplastics in the Ecosystem: Ecological Effects, Risks, and Comprehensive Perspectives on Toxicology and Detection Methods

Recent discoveries of microplastics in cities, suburbs, and even remote locations, far from microplastic source regions, have raised the possibility of long-distance transmission of microplastics in many ecosystems. A little is known scientifically about the threat that it posed to the environment by microplastics. The problem's apparent size necessitates the rapid development of reliable scientific advice regarding the ecological risks of microplastics. These concerns are brought on by the lack of consistent sample and identification techniques, as well as the limited physical analysis and understanding of microplastic pollution. This review provides insight regarding some unaddressed issues about the occurrence, fate, movement, and impact of microplastics, in general, with special emphasis on primary microplastics. The approaches taken in the earlier investigations have been analyzed and different recommendations for future research have been suggested.

Eco-Friendly Fungal Chitosan-Silica Dual-Shell Microcapsules with Tailored Mechanical and Barrier Properties for Potential Consumer Product Applications

Commercial perfume microcapsules are becoming popular across the globe to fulfill consumers' demands. However, most of microcapsules rely on synthetic polymers and/or animal-sourced ingredients to form the shells. Therefore, replacement of the shell materials is imperative to minimize environmental microplastic pollution, as well as to meeting peoples' needs, religious beliefs, and lifestyles. Herein, we report a methodology to fabricate environmentally benign dual-shell (fungal chitosan-SiO2) microcapsules laden with fragrance oil (hexyl salicylate). Anionically stabilized oil droplets were coated with fungal chitosan via interfacial electrostatic interactions at pH 2, which were then covered by an inorganic coating of SiO2 produced via external alkaline mineralization of sodium silicate. Core-shell microcapsules with a spherical morphology were achieved. Under compression, dual-shell chitosan-SiO2 microcapsules yielded a mean nominal rupture stress of 3.0 ± 0.2 MPa, which was significantly higher than that of single-shell microcapsules (1.7 ± 0.2 MPa). After 20 days in neutral pH water, only ∼2.5% of the oil was released from dual-shell microcapsules, while single-shell microcapsules cumulatively released more than 10%. These findings showed that the additional SiO2 coating significantly enhanced both mechanical and barrier properties of microcapsules, which may be appealing for multiple commercial applications, including cosmetics and detergents.

Microplastics in seafood: Consumer preferences and valuation for mitigation technologies

Microplastics, an emerging pollutant, have garnered widespread attention due to potential repercussions on human health and the environment. Given the critical role of seafood in food security, growing concerns about microplastics might be detrimental to meeting future global food demand. This study employed a discrete choice experiment to investigate Chilean consumers' preferences for technology aimed at mitigating microplastic levels in mussels. Using a between-subjects design with information treatments, we examined the impact of informing consumers about potential human health and environmental effects linked to microplastics pollution on their valuation for the technology. We found that the information treatments increased consumers' willingness to pay for mussels. Specifically, consumers were willing to pay a premium of around US$ 4 for 250 g of mussel meat with a 90 % depuration efficiency certification. The provision of health impact information increased the price premium by 56 %, while the provision of environmental information increased it by 21 %. Furthermore, combined health and environmental information significantly increased the probability of non-purchasing behavior by 22.8 % and the risk perception of microplastics for human health by 5.8 %. These results emphasized the critical role of information in shaping consumer preferences and provided evidence for validating investment in research and development related to microplastic pollution mitigation measures.

Stability and release mechanism of double emulsification (W1/O/W2) for biodegradable pH-responsive polyhydroxybutyrate/cellulose acetate phthalate microbeads loaded with the water-soluble bioactive compound niacinamide

Microbeads of biodegradable polyhydroxybutyrate (PHB) offer environmental benefits and economic competitiveness. The aim of this study was to encapsulate a water-soluble bioactive compound, niacinamide (NIA), in a pH-responsive natural matrix composed of PHB and cellulose acetate phthalate (CAP) by double emulsification (W1/O/W2) to improve the encapsulation efficiency (%EE) and loading capacity (%LC). PHB was produced in-house by Escherichia coli JM109 pUC19-23119phaCABA-04 without the inducing agent isopropyl β-D-1-thiogalactopyranoside (IPTG). The influences of PHB and polyvinyl alcohol (PVA) concentrations, stirring rate, PHB/CAP ratio and initial NIA concentration on the properties of NIA-loaded pH-responsive microbeads were studied. The NIA-loaded pH-responsive PHB/CAP microbeads exhibited a spherical core-shell structure. The average size of the NIA-loaded pH-responsive microbeads was 1243.3 ± 11.5 μm. The EE and LC were 33.3 ± 0.5 % and 28.5 ± 0.4 %, respectively. The release profiles of NIA showed pH-responsive properties, as 94.2 ± 3.5 % of NIA was released at pH 5.5, whereas 99.3 ± 2.4 % of NIA was released at pH 7.0. The NIA-loaded pH-responsive PHB/CAP microbeads were stable for >90 days at 4 °C under darkness, with NIA remaining at 73.65 ± 1.86 %. A cytotoxicity assay in PSVK1 cells confirmed that the NIA-loaded pH-responsive PHB/CAP microbeads were nontoxic at concentrations lower than 31.3 μg/mL, in accordance with ISO 10993-5.

Coastal and deep-sea biodegradation of polyhydroxyalkanoate microbeads

Microbeads find widespread usage in personal care items and cosmetics, serving as exfoliants or scrubbing agents. Their micro-scale size poses challenges in effective drainage capture and given their origin from non-biodegradable oil-based plastics, this contributes substantially to marine pollution. In this study, microbeads were prepared by a simple yet scalable melt homogenization method using four types of polyhydroxyalkanoates (PHA), namely poly[(R)-3-hydroxybutyrate] (P(3HB)), poly[(R)-3-hydroxybutyrate-co-(R)-3-hydroxyvalerate] (P(3HB-co-3HV)), poly[(R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate] (P(3HB-co-3HHx)) and poly[(R)-3-hydroxybutyrate-co-(R)-4-hydroxyvalerate] (P(3HB-co-4HB)). Microbeads with different surface smoothness, compressive strength (6.2-13.3 MPa) and diameter (from 1 ~ 150 μm) could be produced. The microbeads were subjected to a comprehensive degradation analysis using three techniques: enzymatic, Biochemical Oxygen Demand (BOD) evaluations, and in situ degradation tests in the deep-sea off Misaki Port in the northern Pacific Ocean (depth of 757 m). Qualitatively, results from enzymatic and in situ degradation demonstrated significant degradation within one week and five months, respectively. Quantitatively, BOD findings indicated that all PHA microbeads degraded similarly to cellulose (~ 85% biodegradability in 25 days). In conclusion, PHA microbeads from this study exhibit promising potential as alternatives to conventional non-biodegradable microbeads.

Altitudinal variation of microplastic abundance in lakeshore sediments from Italian lakes

Microplastic (MP) contamination represents an issue of global concern for both aquatic and terrestrial ecosystems, but only in recent years, the study of MPs has been focused on freshwaters. Several monitoring surveys have detected the presence of a wide array of MPs differing in size, shape, and polymer composition in rivers and lakes worldwide. Because of their role of sink for plastic particles, the abundance of MPs was investigated in waters, and deep and shoreline sediments from diverse lakes, confirming the ubiquity of this contamination. Although diverse factors, including those concerning anthropogenic activities and physical characteristics of lakes, have been supposed to affect MP abundances, very few studies have directly addressed these links. Thus, the aim of the present study was to explore the levels of MP contamination in mountain and subalpine lakes from Northern Italy. Fourteen lakes dislocated at different altitudes and characterized by dissimilar anthropic pressures were visited. Lakeshore sediments were collected close to the drift line to assess MPs contamination. Our results showed the presence of MPs in lakeshore sediments from all the lakes, with a mean (± standard deviation) expressed as MPs/Kg dry sediment accounting to 14.42 ± 13.31 (range 1.57-61.53), while expressed as MPs/m2, it was 176.07 ± 172.83 (range 25.00-666.67). The MP abundance measured for Garda Lake was significantly higher compared to all the other ones (F1,13 = 7.344; P < 0.001). The pattern of contamination was dominated by fibers in all the lakes, but they were the main contributors in mountain lakes. These findings showed that the MP abundance varied according to the altitude of the lakes, with higher levels measured in subalpine lakes located at low altitudes and surrounded by populated areas.

Photochemically Inert Broad-Spectrum Sunscreen by Metal-Phenolic Network Coatings of Titanium Oxide Nanoparticles

Titanium dioxide (TiO2) nanoparticles are extensively used as a sunscreen filter due to their long-active ultraviolet (UV)-blocking performance. However, their practical use is being challenged by high photochemical activities and limited absorption spectrum. Current solutions include the coating of TiO2 with synthetic polymers and formulating a sunscreen product with additional organic UV filters. Unfortunately, these approaches are no longer considered effective because of recent environmental and public health issues. Herein, TiO2-metal-phenolic network hybrid nanoparticles (TiO2-MPN NPs) are developed as the sole active ingredient for sunscreen products through photochemical suppression and absorption spectrum widening. The MPNs are generated by the complexation of tannic acid with multivalent metal ions, forming a robust coating shell. The TiO2-MPN hybridization extends the absorption region to the high-energy-visible (HEV) light range via a new ligand-to-metal charge transfer photoexcitation pathway, boosting both the sun protection factor and ultraviolet-A protection factor about 4-fold. The TiO2-MPN NPs suppressed the photoinduced reactive oxygen species by 99.9% for 6 h under simulated solar irradiation. Accordingly, they substantially alleviated UV- and HEV-induced cytotoxicity of fibroblasts. This work outlines a new tactic for the eco-friendly and biocompatible design of sunscreen agents by selectively inhibiting the photocatalytic activities of semiconductor nanoparticles while broadening their optical spectrum.

Current strategies on bioremediation of personal care products and detergents: Sustainability and life cycle assessment

The increased use of personal care products and detergents in modern society has raised concerns about their potential adverse effects on the environment. These products contain various chemical compounds that can persist in water bodies, leading to water pollution and ecological disturbances. Bioremediation has emerged as a promising approach to address these challenges, utilizing the natural capabilities of microorganisms to degrade or remove these contaminants. This review examines the current strategies employed in the bioremediation of personal care products and detergents, with a specific focus on their sustainability and environmental impact. This bioremediation is essential for environmental rejuvenation, as it uses living organisms to detergents and other daily used products. Its distinctiveness stems from sustainable, nature-centric ways that provide eco-friendly solutions for pollution eradication and nurturing a healthy planet, all while avoiding copying. Explores the use of microbial consortia, enzyme-based treatments, and novel biotechnological approaches in the context of environmental remediation. Additionally, the ecological implications and long-term sustainability of these strategies are assessed. Understanding the strengths and limitations of these bioremediation techniques is essential for developing effective and environmentally friendly solutions to mitigate the impact of personal care products and detergents on ecosystems.

Ingestion and depuration of polyester microfibers by Crassostrea gasar (Adanson, 1757)

The study aimed to obtain environmentally relevant microfibers (MFs) from polyester fabric and assess their impact on the oyster Crassostrea gasar. MFs were obtained by grinding the fabric, and their accumulation in oysters gills and digestive glands was analyzed after exposure to 0.5 mg/L for 2 and 24 h. Additionally, a 48 h depuration was conducted on the oysters exposed for 24 h. Sublethal effects were assessed in oysters exposed for 24 h and depurated for 48 h, using biomarkers like Catalase (CAT), Glutathione S-transferase (GST), and Glutathione Peroxidase (GPx), along with histological analyses. Polyester fabric grinding produced significant MFs (average length: 570 μm) with degraded surface and increased malleability. Oysters showed increased MF accumulation in digestive glands post-exposure, with no impact on antioxidant enzymes. Depuration decreased MFs accumulation. Histological analysis revealed accumulation in the stomach and brown cells, possibly indicating inflammation. This raises concerns about MFs bioaccumulation in marine organisms, impacting the food chain and safety.

Assessment of microplastic contamination in commercially available fishes

Plastics have widespread applications for human use, but their disposal poses a significant threat to living organisms and these plastics end up in the marine environment. They will be fragmented into small pieces as a result of ultraviolet exposure, climatic changes, and temperature changes; Microplastics (MPs) are plastics that are less than 5 mm in size. The level of MP (Microplastic) pollution in commercially harvested fish from different habitant in Vellore, India is currently unknown. Therefore, this study aimed to determine the presence and characteristics of ingested or inhaled MPs in marine and freshwater fishes highly consumed by the local population. Fish gills and gastrointestinal tracts were aseptically dissected and digested (30% hydrogen peroxide), then filtered and examined under a microscope for the presence of MPs. Further analysis was performed on the samples using Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy (ATR-FTIR) and Scanning Electron Microscopy (SEM) with Energy Dispersive X-Ray (EDAX). Of the samples analysed, a total of 875 MPs were recovered from 32 fishes, with 478 from marine fishes and 397 from freshwater fishes. The most common colours of the MPs were blue and black, while stereo microscopy analysis revealed that the majority of MPs were fibers (91%), followed by fragments (8%) and a small number of films. The ATR-FTIR analysis identified polyvinyl alcohol (39.76%), polyethylene (16.51%), methylcellulose (12.84%) and styrene (9.07%), as the predominant types of MPs in the fish samples. This study highlights the significant impact of MP pollution on marine ecosystems. The research provides insight into the nature and extent of MPs in fish from both marine and freshwater habitats, with an aim for policies and interventions aimed to reduce plastic pollution in the locality.

Microplastic pollution calls for urgent investigations in stygobiont habitats: A case study from Classical karst

Microplastic pollution in karst systems is still poorly studied, despite the presence of protected species and habitats, and important water reserves. Vulnerable key species hosted in these habitats could consume or assimilate microplastics, which can irreversibly damage management efforts, and thus ecosystems functionality. This can be particularly true for subterranean water habitats where microplastic pollution effects on wildlife management programs are not considered. The aim of this study is to provide a case study from the Classical Karst Region, which hosts peculiar habitats and key species protected at European level, such as the olm Proteus anguinus. As this area has been deeply exploited and modified over time, and is adjacent to highways, roads and railways, which could contribute to pollution within the karst system, threatening the ecosystems, it provides a perfect model system. In this study we collected and investigated water and sediment samples from aquatic environments of surface and subterranean habitats hosting several subterranean environment-adapted organisms. Examined particles were counted and characterized by size, color and shape via visual identification under a microscope, with and without UV light. Furthermore, spectroscopic analyses were carried out in order to identify microplastics typology. Microplastics were found in all examined habitats. In water, microplastics concentration ranged from 37 to 86 items/L, in sediments from 776 to 2064 items/kg. Fibre-shape was the main present, followed by fragments and beads, suggesting multiple sources of pollution, especially textile products. Most of the particles were fluorescent under UV light and were mainly transparent, while not-fluorescent ones were especially black, blue or brown. Samples contained especially polyesters and copolymers. These results highlight intense MP pollution in karst areas, with significant impacts on water quality, and potential effects on subterranean environment-dwelling species. We stress the importance of monitoring pollution in these critical environments for biodiversity and habitat conservation: monitoring in karst areas must become a priority for habitat and species protection, and water resources management, improving analyses on a larger number of aquatic surface and subterranean habitats.

Microplastic-induced inhibition of cell adhesion and toxicity evaluation using human dermal fibroblast-derived spheroids

Nanoplastics and microplastics (MPs) can significantly affect marine ecosystems and pose potential risks to human health. Although adverse effects stemming from direct exposure to MPs have been demonstrated at the cellular level in animal models, the potential toxicity of these materials in the human body remains uncertain. In this study, we investigated the three-dimensional (3D) behavior of dermal-derived cells exposed to MPs using artificially manufactured spherical primary polystyrene (PS) particles. To explore these effects, we used cellular spheroids as a 3D cell culture model, examined the size-dependent penetration of PS-MPs, and observed morphological alterations in the spheroids. Furthermore, we assessed changes in physiological activities, including reactive oxygen species, adenosine triphosphate, and lactate dehydrogenase, to elucidate the potential intra- and extracellular toxic reactions to PS-MPs. Additionally, our examination of cell-cell junctions and the extracellular matrix (ECM), along with analysis of the regulators involved in their decreased integrity, revealed negatively influenced changes in expression. This exposure study using spheroid models provides new insights into the potential toxicity of short-term exposure to MPs under conditions that closely resemble in vivo systems.

Emerging isolation and degradation technology of microplastics and nanoplastics in the environment

Microplastics (MPs, less than 5 mm in size) are widely distributed in surroundings in various forms and ways, and threaten ecosystems security and human health. Its environmental behavior as pollutants carrier and the after-effects exposed to MPs has been extensively exploited; whereas, current knowledge on technologies for the separation and degradation of MPs is relatively limited. It is essential to isolate MPs from surroundings and/or degrade to safe levels. This in-depth review details the origin and distribution of MPs. Provides a comprehensive summary of currently available MPs separation and degradation technologies, and discusses the mechanisms, challenges, and application prospects of these technologies. Comparison of the contribution of various separation methods to the separation of NPs and MPs. Furthermore, the latest research trends and direction in bio-degradation technology are outlooked.

Reductions of Plastic Microbeads from Personal Care Products in Wastewater Effluents and Lake Waters Following Regulatory Actions

Plastic microbeads were widely used as exfoliants in personal care products (PCPs; e.g., hand/body washes) in North America, but restrictions were imposed on their use in PCPs in the U.S. (2017) and Canada (2018). We provide the first assessment of whether restrictions are effectively reducing microbeads entering surface waters. We examined their abundance, character, and trends in wastewater treatment plant (WWTP) effluents in Toronto, Canada, from 2016 to 2019, and in adjacent Lake Ontario surface waters (2015 and 2018), encompassing the period before and after the bans. Microbeads isolated from PCPs purchased in 2015 provided a visual morphological key with "irregular" and "spherical" microbead categories. Median concentrations of irregular microbeads, composed of polyethylene plastic, declined by up to 86% in WWTP effluents from 8.4 to 14.3 particles/m3 before to 2.0-2.2 particles/m3 after the bans, while those of spherical microbeads, predominantly synthetic/polyethylene wax, ranged within 0.5-2.3 particles/m3 and did not differ before and after the bans since, as nonplastic, they were not regulated. Similarly, amounts of irregular microbeads declined relative to spherical microbeads in Lake Ontario, indicating that product changes may be influencing observations in lake waters. The results suggest that the Canadian and U.S. restrictions effectively and rapidly reduced plastic microbeads entering waters via WWTPs.

Biodegradation of microplastics: Advancement in the strategic approaches towards prevention of its accumulation and harmful effects

Microplastics (MPs) are plastic particles in a size ranging from 1 mm to 5 mm in diameter, and are formed by the breakdown of plastics from different sources. They are emerging environmental pollutants, and pose a great threat to living organisms. Improper disposal, inadequate recycling, and excessive use of plastic led to the accumulation of MP in the environment. The degradation of MP can be done either biotically or abiotically. In view of that, this article discusses the molecular mechanisms that involve bacteria, fungi, and enzymes to degrade the MP polymers as the primary objective. As per as abiotic degradation is concerned, two different modes of MP degradation were discussed in order to justify the effectiveness of biotic degradation. Finally, this review is concluded with the challenges and future perspectives of MP biodegradation based on the existing research gaps. The main objective of this article is to provide the readers with clear insight, and ideas about the recent advancements in MP biodegradation.

Microbeads in personal care products sold in Pakistan: extraction, quantification, characterization, and buoyancy analysis

Microbeads used in personal care products (PCPs) as an exfoliating agent or as a sorbent phase for delivering active ingredients are the most common sources of microplastics. The release of these plastic microbeads into aquatic environments has raised significant concerns due to their direct availability for ingestion by organisms upon entering the recipient waters. In this study, twelve personal care products (PCPs; 5 face washes and 7 scrubs) were analyzed for microbead content, size, polymer type, and buoyant behavior. Among the face washes, the highest microbead content (i.e., 11 ± 1.2 mg/g) was found in Neutrogena (NS), while the lowest was found in Nivea (NI) with 0.33 ± 0 mg/g. In case of scrubs, Cool and Cool (CL) contained a higher concentration of microbeads (i.e., 57.08±14.15 mg/g) and a lower concentration was found in Yong Chin (YC) (i.e., 10.5±1.5 mg/g). The sizes of microbeads ranged from 3.14 ± 0 to 747 ± 313 μm, and most of the isolated microbeads showed negative buoyant behavior in both freshwater and seawater. The FTIR spectra showed that the microbeads were mainly composed of ethyl-vinyl acetate (66.66%), high-density polyethylene (16.66%), polyethylene terephthalate (8.3%), and nitrile (8.3%). The presence of plastic microbeads in PCPs highlights the need to regulate their use as an exfoliating agent and to raise public awareness to prevent the discharge of these persistent and potentially harmful elements into the environment.

Occurrence of microplastics in three types of household cleaning products and their estimated emissions into the aquatic environment

Microplastics (MPs) in household cleaning products are a significant source of primary MPs. However, their presence in these products remain largely unknown. In this study, three types of common household cleaning products (laundry detergents, toilet bowl cleaners, and dishwashing detergents) were examined to assess the presence of MPs. The potential global emissions of MPs into aquatic environments resulting from the use of these products were estimated using statistics on global wastewater treatment plants (WWTPs) and household cleaning product markets. The average abundance of MPs in household cleaning products was 564.97 ± 327.83 n·kg-1, with toilet bowl cleaners having a significantly higher abundance than the other two products. The most commonly detected polymers in these products were polyamide (PA), silicone, polyurethane (PU), acrylate copolymer (ACR), polyethylene (PE), and polyethylene terephthalate (PET), while the size of the MPs ranged from 21.34 to 442.97 μm, with 81.52 % being <50 μm and 87.32 % being fragment-shaped. The estimated annual MP emissions from these three types of household cleaning products were 3.88 × 1013 ± 1.35 × 1013, with toilet bowl cleaners accounting for 56.44 % of the total emissions. MPs directly released without treatment in WWTPs (2.46 × 1013 n year-1) accounted for 63.40 % of the total emissions, highlighting the importance of increasing the treated rate of wastewater to reduce MP emissions. Sensitivity tests indicated that increasing the MP removal rates of secondary and tertiary WWTPs could also effectively reduce MP emissions. Moreover, gross and per capita MP emissions in 149 countries showed significant differences, which could be attributed to population, market size, demand for household cleaning products, and the level of MP removal among different countries. The findings of this study provide important insights into controlling MP contamination in household cleaning products.

Forecasting global plastic production and microplastic emission using advanced optimised discrete grey model

Plastic pollution has become a prominent and pressing environmental concern within the realm of pollution. In recent times, microplastics have entered our ecosystem, especially in freshwater. In the contemporary global landscape, there exists a mounting apprehension surrounding the manifold environmental and public health issues that have emerged as a result of the substantial accumulation of microplastics. The objective of the current study is to employ an enhanced grey prediction model in order to forecast global plastic production and microplastic emissions. This study compared the accuracy level of the four grey prediction models, namely, EGM (1,1, α, θ), DGM (1,1), EGM (1,1), and DGM (1,1, α) models, to evaluate the accuracy levels. As per the estimation of the study, DGM (1,1, α) was found to be more suitable with higher accuracy levels to predict microplastic emission. The EGM (1,1, α, θ) model has slightly better accuracy than the DGM (1,1, α) model in predicting global plastic production. Various accuracy measurement tools (MAPE and RMSE) were used to determine the model's efficiency. There has been a gradual growth in both plastic production and microplastic emission. The current study using the DGM (1,1, α) model predicted that microplastic emission would be 1,084,018 by 2030. The present study aims to provide valuable insights for policymakers in formulating effective strategies to address the complex issues arising from the release of microplastics into the environment and the continuous production of plastic materials.

When microplastics meet electroanalysis: future analytical trends for an emerging threat

Microplastics are a major modern challenge that must be addressed to protect the environment, particularly the marine environment. Microplastics, defined as particles ≤5 mm, are ubiquitous in the environment. Their small size for a relatively large surface area, high persistence and easy distribution in water, soil and air require the development of new analytical methods to monitor their presence. At present, the availability of analytical techniques that are easy to use, automated, inexpensive and based on new approaches to improve detection remains an open challenge. This review aims to outline the evolution and novelties of classical and advanced methods, in particular the recently reported electroanalytical detectors, methods and devices. Among all the studies reviewed here, we highlight the great advantages of electroanalytical tools over spectroscopic and thermal analysis, especially for the rapid and accurate detection of microplastics in the sub-micron range. Finally, the challenges faced in the development of automated analytical methods are discussed, highlighting recent trends in artificial intelligence (AI) in microplastics analysis.

Approach to an answer to "How dangerous microplastics are to the human body": A systematic review of the quantification of MPs and simultaneously exposed chemicals

This review aims to facilitate future research on microplastics (MPs) in the environment using systematic and analytical protocols, ultimately contributing to assessment of the risk to human health due to continuous daily exposure to MPs. Despite extensive studies on MP abundance in environment, identification, and treatment, their negative effects on human health remain unknown due to the lack of proof from clinical studies and limited technology on the MP identification. To assess the risk of MPs to human health, the first step is to estimate MP intake via ingestion, inhalation, and dermal contact under standardized exposure conditions in daily life. Furthermore, rather than focusing on the sole MPs, migrating chemicals from plastic products should be quantified and their health risk be assessed concurrently with MP release. The critical factors influencing MP release and simultaneously exposed chemicals (SECs) must be investigated using a standardized identification method. This review summarises release sources, factors, and possible routes of MPs from the environment to the human body, and the quantification methods used in risk assessment. We also discussed the issues encountered in MP release and SEC migration. Consequently, this review provides directions for future MP studies that can answer questions about MP toxicity to human health.

Geographical heterogeneity and dominant polymer types in microplastic contamination of lentic ecosystems: implications for methodological standardization and future research

This study examines the prevalence and distribution of microplastic polymer types in lentic ecosystems, revealing significant heterogeneity across different geographical regions and ecosystems. The most dominant type of microplastic observed was polyethylene (PE), followed by polypropylene (PP) and polystyrene (PS), which aligns with global production rates. North America, Asia, and Europe were identified as the regions with the highest microplastic contamination, with the United States, China, Italy, and Spain being the most affected countries. The physical characteristics of each ecosystem, such as wind speed, depth, and eutrophication, alongside seasonal variations, and anthropogenic activities, contributed to the observed heterogeneity in microplastics concentrations. The study highlights the need for further research on microplastics in lentic ecosystems, considering their unique physical characteristics and anthropogenic influences. A significant lack of methodological standardization in microplastics research was identified, leading to underestimation of microplastics prevalence and high heterogeneity in meta-analyses.

It matters how we measure - Quantification of microplastics in drinking water by μFTIR and μRaman

The water treatment for microplastics (MP) at a Danish groundwater-based waterworks was assessed by Fourier-Transform IR micro-spectroscopy (μFTIR) (nominal size limit 6.6 μm) and compared to results from Raman micro-spectroscopy (μRaman) (nominal size limit 1.0 μm) on the same sample set. The MP abundance at the waterworks' inlet and outlet was quantified as MP counts per cubic metre (N/m3) and estimated MP mass per cubic metre (μg/m3). The waterworks' MP removal efficiency was found to be higher when analysing by μFTIR (counts: 78.14 ± 49.70%, mass: 98.73 ± 11.10%) and less fluctuating than when using μRaman (counts: 43.2%, mass: 75.1%). However, both techniques pointed to a value of ∼80% for the counts' removal efficiency of MPs >6.6 μm. Contrarily to what was shown by μRaman, no systematic leaking of MPs from the plastic elements of the facility could be identified for the μFTIR dataset, either from the counts (inlet 31.86 ± 17.17 N/m3, outlet 4.98 ± 2.09 N/m3) or mass estimate (inlet 76.30 ± 106.30 μg/m3, outlet 2.81 ± 2.78 μg/m3). The estimation of human MP intake from drinking water calculated from the μFTIR data (5 N/(year·capita)) proved to be approximately 332 times lower than that calculated from the μRaman dataset, although in line with previous studies employing μFTIR. By merging the MP length datasets from the two techniques, it could be shown that false negatives became prevalent in the μFTIR dataset already below 50 μm. Further, by fitting the overall frequency of the MP length ranges with a power function, it could be shown that μFTIR missed approximately 95.7% of the extrapolated MP population (1-1865.9 μm). Consequently, relying on only μFTIR may have led to underestimating the MP content of the investigated drinking water, as most of the 1-50 μm MP would have been missed.

Sources, Degradation, Ingestion and Effects of Microplastics on Humans: A Review

Celluloid, the predecessor to plastic, was synthesized in 1869, and due to technological advancements, plastic products appear to be ubiquitous in daily life. The massive production, rampant usage, and inadequate disposal of plastic products have led to severe environmental pollution. Consequently, reducing the employment of plastic has emerged as a pressing concern for governments globally. This review explores microplastics, including their origins, absorption, and harmful effects on the environment and humans. Several methods exist for breaking down plastics, including thermal, mechanical, light, catalytic, and biological processes. Despite these methods, microplastics (MPs, between 1 and 5 mm in size) continue to be produced during degradation. Acknowledging the significant threat that MPs pose to the environment and human health is imperative. This form of pollution is pervasive in the air and food and infiltrates our bodies through ingestion, inhalation, or skin contact. It is essential to assess the potential hazards that MPs can introduce. There is evidence suggesting that MPs may have negative impacts on different areas of human health. These include the respiratory, gastrointestinal, immune, nervous, and reproductive systems, the liver and organs, the skin, and even the placenta and placental barrier. It is encouraging to see that most of the countries have taken steps to regulate plastic particles. These measures aim to reduce plastic usage, which is essential today. At the same time, this review summarizes the degradation mechanism of plastics, their impact on human health, and plastic reduction policies worldwide. It provides valuable information for future research on MPs and regulatory development.

Global perspective on microplastics in landfill leachate; Occurrence, abundance, characteristics, and environmental impact

Plastic wastes deposited in landfills eventually break down and degrade into microplastics by physical, chemical, and biological forces. Though microplastics in leachate pose significant threats to the environment, the leachate generated from landfills has not received much attention as a possible source of environmental microplastics. A descriptive and systematic investigationof the global distribution of microplastics in landfill leachate does not exist to date. Therefore, this attempt is to provide a concise scientometric review of the studies on the presence of microplastics in landfill leachate. The present review revealed that the global trend in research on microplastics in leachate has increased exponentially after 2018 and China is the leading country. Different geographical regions have reported different microplastic abundances with the highest of 291.0 ± 91.0 items/L from a landfill in Shanghai. The use of novel sampling techniques to detect small microplastics (20-100 µm) has led to the high abundance of microplastics in landfill leachate in Shanghai. Due to its widespread usage, polyethylene is the most typically encountered polymer type in landfill leachate around the world. However, it is quite challengingto compare the results among studies due to the use of different size categories and extraction techniques. The removal of microplastics by the current leachate treatment facilities is still mostly unexplored, thus it is crucial to develop novel technologies to treat the microplastics in landfill leachate. Further investigations on the transport of microplastics in landfill leachate are urgently required to have a better understanding of potential human exposure and health implications.

Towards a plastic-less planet. Gender and individual responsibility predict the effect of imagery nudges about marine (micro)plastic pollution on R-behavior intentions

Emerging microplastics (MP) pollution is one of the biggest threats for the oceans today. Consumers could reduce MP pollution adopting R-behaviors such as reducing consumption of plastic, refusing products with MP, replacing them for green products, and recycling. Here we tested the efficiency of online nudges (images and short messages) for promoting MP-conscious behavior in Spain (n = 671). The perceived level of environmental responsibility and the willingness to adopt R-behaviors were measured. Messages about seafood with MP and plastic-polluted marine environment were more efficient than images of animals killed by plastics. Feeling responsible for MP pollution predicted R-behavior intention. Women would adopt more R-behaviors than men, while men were more sensitive than females to the proposed nudges. Raising the sense of environmental responsibility would be priority in education campaigns. For different cultural sensitivities to animal suffering, evoking environmental health instead of threats to wildlife would be generally recommended.

Micro- and nanoplastic toxicity: A review on size, type, source, and test-organism implications

Polymeric wastes are among the current major environmental problems due to potential pollution and contamination. Within the spectrum of polymeric waste, microplastics (MPs) and nanoplastics (NPs) have gained ground in recent research since these particles can affect the local biota, inducing toxic effects on several organisms. Different outcomes have been reported depending on particle sizes, shape, types, and exposed organisms and conditions, among other variables. This review aimed to compile and discuss the current knowledge and possible literature gaps regarding the MPs and NPs generation and their toxicological effects as stressors, considering polymer type (as polyethylene, polypropylene, polyethylene terephthalate, polystyrene, polyvinyl chloride, or others), size (micro- or nano-scale), source (commercial, lab-synthesized, or environmental) and test organism group. In that sense, 615 publications were analyzed, among which 72 % discussed micro-sized plastics, while <28 % assayed the toxicity of NPs (<1 μm). For most polymers, MPs and NPs were commercially purchased and used without additional size reduction processes; except for polyethylene terephthalate studies that mostly used grinding and cutting methods to obtain MPs. Polystyrene (PS) was the main polymer studied, as both MPs and NPs. PS accounts for >90 % of NPs reports evaluated, reflecting a major literature gap if compared to its 35.3 % share on MPs studies. Among the main organisms, arthropods and fish combined accounted for nearly 40 % of toxicity testing. Overall, the different types of plastics showed a tendency to report toxic effects, except for the 'Survival/lethality' category, which might indicate that polymeric particles induce mostly sublethal toxic effects. Furthermore, despite differences in publication numbers, we observed greater toxicity reported for NPs than MPs with oxidative stress among the majorly investigated endpoints. This study allowed a hazard profile overview of micro/nanoplastics (MNPs) and the visualization of literature gaps, under a broad diversity of toxicological evidence.

Photodegradation of Microplastics by ZnO Nanoparticles with Resulting Cellular and Subcellular Responses

Both zinc oxide nanoparticles (ZnO NPs) and microplastics (MPs) were extracted from one commercial sunscreen, while other ingredients were removed based on the "like dissolves like" principle. MPs were further extracted by acidic digestion of ZnO NPs using HCl and characterized as spherical particles of approximately 5 μm with layered sheets in an irregular shape on the surface. Although MPs were stable in the presence of simulated sunlight and water after 12 h of exposure, ZnO NPs promoted the photooxidation by producing hydroxyl radicals, with a 2.5-fold increase in the carbonyl index of the degree of surface oxidation. As a result of surface oxidation, spherical MPs were more soluble in water and fragmented to irregular shapes with sharp edges. We then compared the cytotoxicity of primary MPs and secondary MPs (25-200 mg/L) to the HaCaT cell line based on viability loss and subcellular damages. The cellular uptake of MPs transformed by ZnO NPs was enhanced by over 20%, and MPs caused higher cytotoxicity compared with the pristine ones, as evidenced by a 46% lower cell viability, 220% higher lysosomal accumulation, 69% higher cellular reactive oxygen species, 27% more mitochondrial loss, and 72% higher mitochondrial superoxide at 200 mg/L. Our study for the first time explored the activation of MPs by ZnO NPs derived from commercial products and revealed the high cytotoxicity caused by secondary MPs, providing new evidence on the effects of secondary MPs on human health.

Microplastic Index-How to Predict Microplastics Formation?

The presence of microplastics in environmental compartments is generally recognized as a (potential) health risk. Many papers have been published on the abundance of microplastics at various locations around the globe, but only limited knowledge is available on possible mitigation routes. One of the mitigation routes is based on the choice of plastic materials used for products that may unintentionally end up in the environment. As a first approach, this paper presents a method to calculate the tendency of polymers to form microplastics, based on their mechanical and physical properties. A MicroPlastic Index (MPI) that correlates the microplastic formation to polymer properties is defined for both impact and wear of polymers via a theoretical particle size and the energy required to form these particles. A first comparison between calculated and experimental particle size is included. The MPI for impact and wear follow the same trend. Finally, these MPIs are correlated to the respective abundance of the microplastics in the environment, corrected for global production of the corresponding polymers: the higher the MPI, the more microplastics are found in the environment. Thus, the MPI can be used as a basis for choice or redesign of polymers to reduce microplastic formation.