Compatibility of the green fluorescent protein and a general nucleic acid stain for quantitative description of a Pseudomonas putida biofilm

Effects of oxytetracycline on aerobic granular sludge process: Granulation, biological nutrient removal and microbial community structure

Formation of aerobic granular sludge (AGS), process performance and microbial community structure were investigated in lab-scale sequencing batch reactors (SBR) operated without and with oxytetracycline (OTC). Granulation of activated sludge and appearance of AGS was observed in parallel SBRs operated without and with OTC. However, formation of well-settling aerobic granules was relatively faster in the SBR fed with 100 μg/L OTC and observed within 2 weeks of start-up. Ammonium, total nitrogen, and phosphorus removals were quickly established in the AGS cultivated without OTC. In contrast, nitrogen and phosphorus removals were lower in the OTC fed SBR. But, a gradual improvement in nitrogen and phosphorus removals was observed. After 45 days, nitrogen and phosphorous removals were stabilized at 99% and 70%, respectively, due to establishment of OTC-tolerant community. qPCR revealed the impact of OTC on ammonium oxidizing bacteria, polyphosphate accumulating organisms and their enrichment during exposure to OTC. Ammonium and phosphorus were majorly removed via nitritation-denitritation and enhanced biological phosphorus removal (EBPR) pathways, respectively, in the presence of OTC. Brevundimonas (35%), Thaurea (14%) sp. Ca. Competibacter (5.6%), and Ca. Accumulibacter (4.2%) were enriched in OTC-fed AGS. Of the two OTC-tolerant strains isolated, Micrococcus luteus exhibited growth and efficient OTC biotransformation at different OTC concentrations. Moreover, M. luteus was predominantly growing in the form of aggregates. Key traits such as tolerance, biotransformation and high autoaggregation ability allowed a niche for this strain in the granules. This work has important implications in understanding the effect of antibiotics on AGS and designing AGS based treatment for antibiotic-laden wastewaters.

Structural and mechanical characterization of biofilm-associated bacterial polymer in the emulsification of petroleum hydrocarbon

The marine bacterium Pseudomonas furukawaii PPS-19 isolated from the oil-polluted site of Paradip port, Odisha, India, was found to form a strong biofilm in 2% (v/v) crude oil. Confocal Laser Scanning Microscopy (CLSM) revealed biofilm components along with multi-layered dense biofilm of rod-shaped cells with 64.7 µm thickness. Scanning electron micrographs showed similar biofilm architecture covered with a gluey matrix of extracellular polymeric substances (EPS) in the presence of 2% (v/v) crude oil. The architecture of purified EPS was also studied through FESEM that exposed its porous and three-dimensional flakes-like structure. The structural characterization by FTIR revealed that EPS was composed of primary alkane, amines, halide, hydroxyl groups, uronic acid, and saccharides. The XRD profile exhibited an amorphous phase of the EPS with a crystallinity index of 0.336. The EPS showed three-step thermal decomposition and thermal stability up to 600 °C, as confirmed by TGA and DSC thermogram. EPS produced by marine bacterium P. furukawaii PPS-19 could act as bioemulsifier and showed the highest emulsifying activity of 66.23% on petrol. The emulsifying ability of the EPS was superior to the commercial polymer xanthan. The emulsion also showed high stability with time and temperature exposure. The marine bacterium P. furukawaii PPS-19 and the EPS complex showed 89.52% degradation of crude oil within 5 days. These properties demonstrated the potential of biofilm-forming marine bacterium as bioemulsifier for its application in the bioremediation of oil-polluted sites.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s13205-021-02795-8.

Surface modification of strontium-doped porous bioactive ceramic scaffolds via poly(DOPA) coating and immobilizing silk fibroin for excellent angiogenic and osteogenic properties

For bioceramic scaffolds employed in clinical applications, excellent bioactivity and tenacity were of great importance. Modifying inorganic SCPP scaffolds with biological macromolecules could obviously improve its bioactivity and eliminate its palpable brittleness. However, it was hard to execute directly due to extremely bad interfacial compatibility between them. In this research, dopamine (DOPA) was introduced onto strontium-doped calcium polyphosphate (SCPP) scaffolds, subsequently the preliminary material was successfully further modified by silk fibroin (SF). SCPP/D/SF possessed suitable biomechanical properties, ability to stimulate angiogenic factor secretion and excellent biocompatibility. Biomechanical examination demonstrated that SCPP/D/SF scaffolds yielded better compressive strength because of improved interfacial compatibility. MTT assay and CLSM observation showed that SCPP/D/SF scaffolds had good cytocompatibility and presented better inducing-cell-migration potential than pure SCPP scaffolds. Meanwhile, its ability to stimulate angiogenic factor secretion was measured through the ELISA assay and immunohistological analysis in vitro and in vivo respectively. The results revealed, superior to SCPP, SCPP/D/SF could effectively promote VEGF and bFGF expression, possibly leading to enhancing angiogenesis and osteogenesis. In a word, SCPP/D/SF could serve as a potential bone tissue engineering scaffold for comparable biomechanical properties and excellent bioactivity. It provided a novel idea for modification of inorganic materials to prepare promising bone tissue engineering scaffolds with the ability to accelerate bone regeneration and vascularization.

Characterization of Stenotrophomonas acidaminiphila NCW-702 biofilm for implication in the degradation of polycyclic aromatic hydrocarbons

AIMS

Biofilm formation and polycyclic aromatic hydrocarbons (PAHs) degradation by a marine bacterium Stenotrophomonas acidaminihila NCW-702 was investigated.

METHODS AND RESULTS

The biofilm structure was studied by confocal laser scanning microscopy (CLSM). Both planktonic and biofilm cultures were used for PAHs (phenanthrene and pyrene) degradation. In 7 days, Sten. acidaminiphila biofilm culture efficiently degraded 71·1 ± 3·1% and 40·2 ± 2·4% of phenanthrene and pyrene, respectively, whereas 38·7 ± 2·5% of phenanthrene and 29·7 ± 1% of pyrene degradation was observed in planktonic culture. The presence of phenolic intermediates in the culture supernatant during degradation process was evaluated by Folin-Ciocalteu reagent. The average thickness and diffusion distance of Sten. acidaminiphila NCW-702 biofilm was found to be 23·94 ± 2·62 μm and 2·68 ± 0·7 μm, respectively. Bacterial biofilms have numerous metabolic features that aid in the degradation of hydrophobic organic pollutants.

CONCLUSIONS

Biofilm of Sten. acidaminiphila NCW-702 was able to degrade PAHs more efficiently as compared to planktonic cells. The findings support the efficacy of biofilms over planktonic culture in bioremediation applications.

SIGNIFICANCE AND IMPACT OF THE STUDY

The study provides a constructive application of bacterial biofilms for the bioremediation of hydrophobic organic contaminants. The biofilm mode remediation process has the advantage of reusability of bacterial biomass and is also a low cost process as compared to cell immobilization techniques.

Unraveling microbial biofilms of importance for food microbiology

The presence of biofilms is a relevant risk factors in the food industry due to the potential contamination of food products with pathogenic and spoilage microorganisms. The majority of bacteria are able to adhere and to form biofilms, where they can persist and survive for days to weeks or even longer, depending on the microorganism and the environmental conditions. The biological cycle of biofilms includes several developmental phases such as: initial attachment, maturation, maintenance, and dispersal. Bacteria in biofilms are generally well protected against environmental stress, consequently, extremely difficult to eradicate and detect in food industry. In the present manuscript, some techniques and compounds used to control and to prevent the biofilm formation are presented and discussed. Moreover, a number of novel techniques have been recently employed to detect and evaluate bacteria attached to surfaces, including real-time polymerase chain reaction (PCR), DNA microarray and confocal laser scanning microscopy. Better knowledge on the architecture, physiology and molecular signaling in biofilms can contribute for preventing and controlling food-related spoilage and pathogenic bacteria. The present study highlights basic and applied concepts important for understanding the role of biofilms in bacterial survival, persistence and dissemination in food processing environments.

Investigation of microbial biofilm structure by laser scanning microscopy

Microbial bioaggregates and biofilms are hydrated three-dimensional structures of cells and extracellular polymeric substances (EPS). Microbial communities associated with interfaces and the samples thereof may come from natural, technical, and medical habitats. For imaging such complex microbial communities confocal laser scanning microscopy (CLSM) is the method of choice. CLSM allows flexible mounting and noninvasive three-dimensional sectioning of hydrated, living, as well as fixed samples. For this purpose a broad range of objective lenses is available having different working distance and resolution. By means of CLSM the signals detected may originate from reflection, autofluorescence, reporter genes/fluorescence proteins, fluorochromes binding to specific targets, or other probes conjugated with fluorochromes. Recorded datasets can be used not only for visualization but also for semiquantitative analysis. As a result CLSM represents a very useful tool for imaging of microbiological samples in combination with other analytical techniques.

Electrochemical biofilm control: mechanism of action

Although it has been previously demonstrated that an electrical current can be used to control biofilm growth on metal surfaces, the literature results are conflicting and there is no accepted mechanism of action. One of the suggested mechanisms is the production of hydrogen peroxide (H(2)O(2)) on metal surfaces. However, there are literature studies in which H(2)O(2) could not be detected in the bulk solution. This is most likely because H(2)O(2) was produced at a low concentration near the surface and could not be detected in the bulk solution. The goals of this research were (1) to develop a well-controlled system to explain the mechanism of action of the bioelectrochemical effect on 316L stainless steel (SS) surfaces and (2) to test whether the produced H(2)O(2) can reduce cell growth on metal surfaces. It was found that H(2)O(2) was produced near 316L SS surfaces when a negative potential was applied. The H(2)O(2) concentration increased towards the surface, while the dissolved oxygen decreased when the SS surface was polarized to -600 mV(Ag/AgCl). When polarized and non-polarized surfaces with identical Pseudomonas aeruginosa PAO1 biofilms were continuously fed with air-saturated growth medium, the polarized surfaces showed minimal biofilm growth while there was significant biofilm growth on the non-polarized surfaces. Although there was no detectable H(2)O(2) in the bulk solution, it was found that the surface concentration of H(2)O(2) was able to prevent biofilm growth.

Bacterial assay for the rapid assessment of antifouling and fouling release properties of coatings and materials

An assay has been developed to accurately quantify the growth and release behaviour of bacterial biofilms on several test reference materials and coatings, using the marine bacterium Cobetia marina as a model organism. The assay can be used to investigate the inhibition of bacterial growth and release properties of many surfaces when compared to a reference. The method is based upon the staining of attached bacterial cells with the nucleic acid-binding, green fluorescent SYTO 13 stain. A strong linear correlation exists between the fluorescence of the bacterial suspension measured (RFU) using a plate reader and the total bacterial count measured with epifluorescence microscopy. This relationship allows the fluorescent technique to be used for the quantification of bacterial cells attached to surfaces. As the bacteria proliferate on the surface over a period of time, the relative fluorescence unit (RFU) measured using the plate reader also shows an increase with time. This was observed on all three test surfaces (glass, Epikote and Silastic T2) over a period of 4 h of bacterial growth, followed by a release assay, which was carried out by the application of hydrodynamic shear forces using a custom-made rotary device. Different fixed rotor speeds were tested, and based on the release analysis, 12 knots was used to provide standard shear force. The assay developed was then applied for assessing three different antifouling coatings of different surface roughness. The novel assay allows the rapid and sensitive enumeration of attached bacteria directly on the coated surface. This is the first plate reader assay technique that allows estimation of irreversibly attached bacterial cells directly on the coated surface without their removal from the surface or extraction of a stain into solution.

Marine antifouling laboratory bioassays: an overview of their diversity

In aquatic environments, biofouling is a natural process of colonization of submerged surfaces, either living or artificial, involving a wide range of organisms from bacteria to invertebrates. Antifouling can be defined as preventing the attachment of organisms onto surfaces. This article reviews the laboratory bioassays that have been developed for studying the control of algae and invertebrates by epibiosis (chemical ecology) and the screening of new active compounds (natural products and biocides) to inhibit settlement or adhesion, ie fouling-release coatings. The assays utilize a range of organisms (mainly marine bacteria, diatoms, algae, barnacles). The main attributes of assays for micro- and macroorganisms are described in terms of their main characteristics and depending on the biological process assessed (growth, adhesion, toxicity, behavior). The validation of bioassays is also discussed.

Architecture and spatial organization in a triple-species bacterial biofilm synergistically degrading the phenylurea herbicide linuron

Members of a triple-species 3-(3,4-dichlorophenyl)-1-methoxy-1-methyl urea (linuron)-mineralizing consortium, i.e. the linuron- and 3,4-dichloroaniline-degrading Variovorax sp. WDL1, the 3,4-dichloroaniline-degrading Comamonas testosteroni WDL7 and the N,O-dimethylhydroxylamine-degrading Hyphomicrobium sulfonivorans WDL6, were cultivated as mono- or multi-species biofilms in flow cells irrigated with selective or nonselective media, and examined with confocal laser scanning microscopy. In contrast to mono-species biofilms of Variovorax sp. WDL1, the triple-species consortium biofilm degraded linuron completely through apparent synergistic interactions. The triple-species linuron-fed consortium biofilm displayed a heterogeneous structure with an irregular surface topography that most resembled the topography of linuron-fed mono-species WDL1 biofilms, indicating that WDL1 had a dominating influence on the triple-species biofilm architecture. This architecture was dependent on the carbon source supplied, as the biofilm architecture of WDL1 growing on alternative carbon sources was different from that observed under linuron-fed conditions. Linuron-fed triple-species consortium biofilms consisted of mounds composed of closely associated WDL1, WDL7 and WDL6 cells, while this association was lost when the consortium was grown on a nonselective carbon source. In addition, under linuron-fed conditions, microcolonies displaying associated growth developed rapidly after inoculation. These observations indicate that the spatial organization in the linuron-fed consortium biofilm reflected the metabolic interactions within the consortium.

Bioaugmentation of aerobic microbial granules with Pseudomonas putida carrying TOL plasmid

This paper describes results of a successful bioaugmentation experiment on aerobic granular sludge using Pseudomonas putida KT2442 cells bearing the TOL (pWWO) plasmid. The methodology was designed to monitor incorporation of the added donor cells into pre-existent microbial granules and the subsequent plasmid transfer to the autochthonous microbial community using shake flask microcosms. Expression of reporter proteins (GFP and DsRed) allowed in situ monitoring of donor cell attachment and plasmid transfer to the recipient cells using confocal laser scanning microscopy. Concomitant with donor integration and transconjugant proliferation in the granules, a significant increase in degradation of benzyl alcohol (used as sole substrate) was observed in the augmented microcosms. In contrast, control microcosms (with non-augmented granules) did not show any noticeable increase in the degradation of the substrate. This study shows that bioaugmentation of aerobic granular sludge via donor colonization and plasmid transfer is feasible for enhanced biodegradation.

Establishment and characterization of dual-species biofilms formed from a 3,5-dinitrobenzoic-degrading strain and bacteria with high biofilm-forming capabilities

In this study, the possibility of establishing a dual-species biofilm from a bacterium with a high biofilm-forming capability and a 3,5-dinitrobenzoic acid (3,5-DNBA)-degrading bacterium, Comamonas testosteroni A3, was investigated. Our results showed that the combinations of strain A3 with each of five strains with a high biofilm-forming capability (Pseudomonas sp. M8, Pseudomonas putida M9, Bacillus cereus M19, Pseudomonas plecoglossicida M21 and Aeromonas hydrophila M22) presented different levels of enhancement regarding biofilm-forming capability. Among these culture combinations, the 24-h dual-species biofilms established by C. testosteroni A3 with P. putida M9 and A. hydrophila M22 showed the strongest resistance to 3,5-DNBA shock loading, as demonstrated by six successive replacements with DMM2 synthetic wastewater. The degradation rates of 3,5-DNBA by these two culture combinations reached 63.3-91.6% and 70.7-89.4%, respectively, within 6 h of every replacement. Using the gfp-tagged strain M22 and confocal laser scanning microscopy, the immobilization of A3 cells in the dual-species biofilm was confirmed. We thus demonstrated that, during wastewater treatment processes, it is possible to immobilize degrader bacteria with bacteria with a high biofilm-forming capability and to enable them to develop into the mixed microbial flora. This may be a simple and economical method that represents a novel strategy for effective bioaugmentation.

Toward automated analysis of biofilm architecture: bias caused by extraneous confocal laser scanning microscopy images

An increasing number of studies utilize confocal laser scanning microscopy (CLSM) for in situ visualization of biofilms and rely on the use of image analysis programs to extract quantitative descriptors of architecture. Recently, designed programs have begun incorporating procedures to automatically determine threshold values for three-dimensional CLSM image stacks. We have found that the automated threshold calculation is biased when a stack contains images lacking pixels of biological significance. Consequently, we have created the novel program Auto PHLIP-ML to resolve this bias by iteratively excluding extraneous images based on their area coverage of biomass. A procedure was developed to identify the optimal percent area coverage value used for extraneous image removal (PACVEIR). The optimal PACVEIR was defined to occur when the standard deviation of mean thickness, determined from replicate image stacks, was at a maximum, because it more accurately reflected inherent structural variation. Ten monoculture biofilms of either Ralstonia eutropha JMP228n::gfp or Acinetobacter sp. strain BD413 were tested to verify the routine. All biofilms exhibited an optimal PACVEIR between 0 and 1%. Prior to the exclusion of extraneous images, JMP228n::gfp appeared to develop more homogeneous biofilms than BD413. However, after the removal of extraneous images, JMP228n::gfp biofilms were found to form more heterogeneous biofilms. Similarly, JMP228n::gfp biofilms grown on glass surfaces vis-à-vis polyethylene membranes produced significantly different architectures after extraneous images had been removed but not when such images were included in threshold calculations. This study shows that the failure to remove extraneous images skewed a seemingly objective analysis of biofilm architecture and significantly altered statistically derived conclusions.

Continuous nondestructive monitoring of Bordetella pertussis biofilms by Fourier transform infrared spectroscopy and other corroborative techniques

This work describes the application of several analytical techniques to characterize the development of Bordetella pertussis biofilms and to examine, in particular, the contribution of virulence factors in this development. Growth of surface-attached virulent and avirulent B. pertussis strains was monitored in continuous-flow chambers by techniques such as the crystal violet method, and nondestructive methodologies like fluorescence microscopy and Fourier transform (FT) IR spectroscopy. Additionally, B. pertussis virulent and avirulent strains expressing green fluorescent protein were grown adhered to the base of a glass chamber of 1-microm thickness. Three-dimensional images of mature biofilms, acquired by confocal laser scanning microscopy, were quantitatively analysed by means of the computer program COMSTAT. Our results indicate that only the virulent (Bvg(+)) phase of B. pertussis is able to attach to surfaces and develop a mature biofilm. In the virulent phase these bacteria are capable of producing a biofilm consisting of microcolonies of approximately 200 microm in diameter and 24 microm in depth. FTIR spectroscopy allowed us not only to follow the dynamics of biofilm growth through specific biomass and biofilm marker absorption bands, but also to monitor the maturation of the biofilm by means of the increase of the carbohydrate-to-protein ratio.

Introduction of a boost of Legionella pneumophila into a stagnant-water model by heat treatment

An environmentally representative stagnant-water model was developed to monitor the growth dynamics of Legionella pneumophila. This model was evaluated for three distinct water treatments: untreated tap water, heat-treated tap water, and heat-treated tap water supplemented with Pseudomonas putida, a known biofilm-forming bacterium. Bringing heat-treated tap water after subsequent cooling into contact with a densely formed untreated biofilm was found to promote the number of L. pneumophila by 4 log units within the biofilm, while the use of untreated water only sustained the L. pneumophila levels. Subsequent colonization of the water phase by L. pneumophila was noticed in the heat-treated stagnant-water models, with concentrations as high as 1 x 10(10) mip gene copies L(-1) stagnant water. Denaturing gradient gel electrophoresis in combination with clustering analysis of the prokaryotic community in the water phase and in the biofilm phase suggests that the different water treatments induced different communities. Moreover, boosts of L. pneumophila arising from heat treatment of water were accompanied by shifts to a more diverse eukaryotic community. Stimulated growth of L. pneumophila after heating of the water may explain the rapid recolonization of L. pneumophila in water systems. These results highlight the need for additional or alternative measures to heat treatment of water in order to prevent or abate potential outbreaks of L. pneumophila.

Accumulation and fate of green fluorescent labeled Escherichia coli in laboratory-scale drinking water biofilters

Biological filters combining microbial activity and rapid sand filtration are used in drinking water treatment plants for enhanced biodegradable organic matters (BOM) removal. Biofilms formed on filter media comprised of bacteria enclosed in a polymeric matrix are responsible for the adsorption of BOM and attachment of planktonic microorganisms. This study investigated the removal of Escherichia coli cells injected into laboratory-scale biofilters and the role of biofilm in retaining the injected E. coli. Green fluorescent protein was used as a specific marker to detect and quantify E. coli in the biofilms. About 35% of the total injected E. coli cells were observed in the filter effluents, when initial cell concentrations were measured at 7.4 x 10(6) CFU/mL and 1.6 x 10(7) CFU/mL in two separate experiments. The results from real-time PCR and plate count analysis indicated that 95% of the E. coli retained inside the filters were either non-viable or could not be recovered by colony counting techniques. Injected cells were unevenly distributed inside the filter with more than 70% located at the top 1/5 of the filter. Images obtained from an epifluorescent microscope showed that E. coli cells were embedded inside the biofilm matrix and presented mainly as microcolonies intertwined with other microorganisms, which was consistent with findings from standard plate count methods and qPCR.

Biofilm formation by Pseudoalteromonas ruthenica and its removal by chlorine

The distribution of a recently described marine bacterium, SBT 033 GenBank Accession No. AY723742), Pseudoalteromonas ruthenica, at the seawater intake point, outfall and mixing point of an atomic power plant is described, and its ability to form biofilm was investigated. The effectiveness of the antifouling biocide chlorine in the inactivation of planktonic as well as biofilm cells of P. ruthenica was studied in the laboratory. The results show that the planktonic cells were more readily inactivated than the cells enclosed in a biofilm matrix. Viable counting showed that P. ruthenica cells in biofilms were up to 10 times more resistant to chlorine than those in liquid suspension. Using confocal laser scanning microscopy it was shown that significant detachment of P. ruthenica biofilm developed on a glass substratum could be accomplished by treatment with a dose of 1 mg l-1 chlorine. Chlorine-induced detachment led to a significant reduction in biofilm thickness (up to 69%) and substratum coverage (up to 61%), after 5-min contact time. The results show that P. ruthenica has a remarkable ability to form biofilms but chlorine, a common biocide, can be used to effectively kill and detach these biofilms.

Bacterial-protozoa interactions; an update on the role these phenomena play towards human illness

The usage of water with poor microbiological quality increases the risk of human illness. This review discusses and updates current thinking on the nature of the interaction between a range of human bacterial pathogens and waterborne protozoa. The importance of protozoa acting as protective environments for pathogenic bacteria from disinfection and of promoting extended survival in otherwise hostile environments is highlighted. The significance of biofilms in water systems, and new relationships between Salmonella and Campylobacter and water-borne protozoa are also discussed. The protection of pathogenic bacteria from disinfection within protozoa and/or biofilms has important implications for water safety.