Antimicrobial activity of graphite oxide doped with silver against Bacillus subtilis, Candida albicans, Escherichia coli, and Staphylococcus aureus by agar well diffusion test: Synthesis and characterization

The Antimicrobial Extract Derived from Pseudomonas sp. HP-1 for Inhibition of Aspergillus flavus Growth and Prolongation of Maize Seed Storage

Maize, one of the most widely cultivated crops globally, is highly susceptible to mycotoxin contamination. In this study, an endophytic strain Pseudomonas sp. HP-1, isolated from Peganum harmala L., demonstrated significant biocontrol potential. The culture extract of Pseudomonas sp. HP-1 (PHE) exhibited strong antifungal activity, with inhibition zones of 40.07 ± 0.21 mm against Penicillium italicum, 29.71 ± 0.25 mm against Aspergillus niger, and 23.10 ± 0.44 mm against A. flavus, along with notable antibacterial activity against Staphylococcus aureus (22.43 ± 0.55 mm). At a concentration of 16 mg/mL, PHE almost completely inhibited the mycelial growth of A. flavus. The antifungal mechanism of PHE was investigated through scanning electron microscopy (SEM) and propidium iodide (PI) staining analysis, which demonstrated that antifungal activity is primarily through the disruption of cellular membrane integrity. Furthermore, PHE significantly reduced the incidence of A. flavus contamination in agroecological maize seeds during storage, and treated PHE showed superior antifungal efficacy compared to non-treated PHE, highlighting its potential as an effective antifungal agent for seed protection. Through one- and two-dimensional NMR and MS analyses, the primary active compound of PHE was identified as 1-phenazinecarboxylic acid. These findings indicate that PHE can be utilized as a sustainable antifungal agent for protecting maize seeds against mycotoxin-producing fungi.

Phytochemical Investigation, Antibacterial and Antioxidant Activity Determination of Leaf Extracts of Cynoglossum coeruleum (Shimgigit)

The leaf of Cynoglossum coeruleum is traditionally used in tropical medicine for treating various ailments. This study analyzed the phytochemicals, flavonoid and phenolic content, antioxidant capacity, and antibacterial activity of its leaf extracts. Phytochemical tests revealed the presence of alkaloids, flavonoids, phenols, steroids, terpenoids, and saponins. The total flavonoid content in methanol, ethyl acetate, and petroleum ether extracts was 74.66 mgQE/g, 67.34 mgQE/g, and 15.39 mgQE/g, respectively. Total phenolic content was 61.93 mg GAE/g, 25.61 mg GAE/g, and 17.72 mg GAE/g. The extracts showed significant antibacterial activity against Escherichia coli, Klebsiella pneumoniae, Staphylococcus aureus, and Staphylococcus epidermidis at higher concentrations.

Exploring the antibacterial efficacy of Opuntia monacantha in combatting methicillin-resistant Staphylococcus aureus

Public health is seriously threatened by the rise of antibiotic-resistant strains of bacteria, especially methicillin resistant Staphylococcus aureus (MRSA). This study investigated the phytochemical compounds, and possible antibacterial effects of a methanolic extract of the cactus species Opuntia monacantha Haw. against MRSA. The powdered substance was extracted with methanol and filtered, and the filtrate was partitioned with n-hexane, chloroform and ethyl acetate. The fractions with higher percentage yields such as the n-hexane and chloroform fractions went through GC-MS analysis. They consist of various compounds that are known to have strong antioxidant and antimicrobial activities. The antimicrobial activity of the plant was measured via a diffusion assay. On the basis of these results, the Opuntia monacantha crude methanolic extract, and the n-hexane and chloroform fractions significantly inhibited all the MRSA strains used in the test at 100, 75 and 50 mg/mL. Furthermore, the minimum inhibitory concentrations of various fractions of the methanolic extract of Opuntia monacantha were also examined. Therefore, Opuntia could be a promising candidate for strengthening the existing formulations in pharmaceutical science for the treatment of MRSA. However, additional research is necessary before its therapeutic use is recommended. The results are intended to provide important new information for the creation of sustainable and alternative antimicrobial agents.

Fabrication and Characterization of Buforin I-Loaded Electrospun Chitosan/Polyethylene Oxide Nanofibrous Membranes with Antimicrobial Activity for Food Packing Applications

The rising resistance of bacteria to antibiotics has driven the search for new antimicrobial agents. This study focused on encapsulating Buforin I, an antimicrobial peptide, in chitosan/polyethylene oxide (CS-PEO) nanofibers. Buforin I was loaded at a minimum bactericidal concentration (MBC), 10× MBC, and 20× MBC, with assessments on morphology, thermal properties, chemical bonds, crystalline structure, mechanical strength, antimicrobial activity, and cell toxicity. Techniques like differential scanning calorimetry and Fourier-transform infrared spectroscopy confirmed the effective loading of Buforin I in the nanofibers. Scanning electron microscopy showed that Buforin incorporation increased nanofiber diameters. The tensile strength peaked at 20× MBC. Microbial tests indicated that the inhibition zone for nanofibers at 20× MBC surpassed that of commercial antibiotics. Beef coated with CS-PEO nanofibers containing Buforin I demonstrated reduced pH and water activity, alongside lower weight loss during storage. Texture and color analyses revealed that the Buforin I nanofibers helped maintain beef hardness and slowed color degradation compared to control samples. Moreover, thiobarbituric acid levels and total microbial counts in the coated beef were significantly lower than controls (below 3 log CFU/g after 9 days at 4 °C). Thus, these nanofibers may serve as effective antimicrobial packaging agents to delay food spoilage.

Microwave-synthesized NiZrO3@GNP and NiZrO3@MWCNT nanocomposites: enhanced antimicrobial efficacy against biofilms and Mycobacterium smegmatis

The persistent challenge posed by antibiotic-resistant bacteria and tuberculosis necessitates innovative approaches to antimicrobial treatment. This study explores the synthesis and characterization of NiZrO₃ nanoparticles integrated with graphene nanoplatelets (GNP) and multi-walled carbon nanotubes (MWCNT), using a microwave-assisted green synthesis route, employing fenugreek (Trigonella foenum-graecum) seed extract as a gelling agent. The synthesised nanocomposites were systematically analyzed using XRD, FT-IR, Raman spectroscopy, HR-SEM and HR TEM analysis to assess structural, optical, and morphological properties. The antimicrobial and antibiofilm efficacy was evaluated against drug-resistant strains, including Escherichia coli and Klebsiella pneumoniae, by well diffusion method and crystal violet-Microtitre plate (CV-MtP) method. Notably, the NiZrO₃@MWCNT composite exhibited a maximum antibacterial inhibition zone of 13 mm and showed superior biofilm inhibition of 92.8% against K. pneumoniae at 500 ppm. In contrast, NiZrO₃@GNP demonstrated a biofilm inhibition of 97% at 500 ppm. Furthermore, the microplate Alamar Blue assay (MABA) was employed to determine the minimum inhibitory concentration (MIC) against Mycobacterium smegmatis (MTS) with NiZrO₃@MWCNT achieving 96% inhibition and at 500 ppm. These results confirm the enhanced antimicrobial efficacy of the carbon-integrated nanocomposites over pure NiZrO₃, which showed limited activity. This research underscores the promise of NiZrO₃-based nanocomposites as advanced antimicrobial agents, offering a novel strategy to combat the global health threat of antibiotic resistance.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-024-04201-5.

Synthesis, Characterization and Antibacterial Activity Evaluation of CuO NPs and B-CuO NPs Obtained from Livistona Chinensis Leaf Extract

Nanoparticles (NPs) exhibit fascinating size-dependent chemical and physical characteristics that make them useful for a variety of applications. The present paper reports the green synthesis of CuO NPs and B-doped CuO NPs (B-CuO NPs) from Livistona chinensis leaf extract. Not much work has been reported on the use of the plant extract for the fabrication of NPs, particularly those of Cu and its doped counterparts. Various spectroscopic techniques were used to characterize the synthesized NPs. In the FT-IR spectra, peaks obtained at 504 cm-1 to 600 cm-1 were due to Cu-O vibrations. The energy dispersive X-ray analysis (EDX) spectra confirmed the CuO NPs' composition and B's presence inside the NPs. The peak pattern in the X-ray diffraction (XRD) spectrum confirmed the crystalline and monoclinic phases of the NPs. The average crystalline size of CuO NPs and B-CuO NPs was 19.56 nm and 17.30 nm respectively. The CuO and B-CuO NPs were tested against three Gram-positive bacterial strains namely Bacillus subtilis, Micrococcus luteus, and Staphylococcus aureus and three Gram-negative Escherichia coli, Salmonella abony, and Pseudomonas aeruginosa through Agar well diffusion method and it was found that CuO NPs showed higher activity than B-CuO NPs. Gentamicin was used as the positive control. The antibacterial activity may be due to the cell wall disruption by induction of innate and adaptive host immune response, generating toxic reactive oxygen species (ROS), and stimulating intracellular effects.

Examining the impact of hydroxy group position on antibacterial activity of copper complexes derived from vanillin-based Schiff bases: Experimental and computational analysis

The positioning of the hydroxy group plays a crucial role in the coordination of Schiff bases with copper ions and their antibacterial effectiveness. This potential is an area of interest for future exploration, although no specific studies have been conducted. This study aims to reveal the significance of the positioning of the hydroxy group in the ability of the Schiff base to coordinate with copper ion and its antibacterial efficacy against E. coli and S. aureus. By utilizing ortho-vanillin and para-vanillin as precursors, we successfully synthesized Schiff bases HL1 (ortho) and L2 (para), which were confirmed through Fourier Transform Infrared (FT-IR) and Nuclear Magnetic Resonance (NMR) analyses. HL1 forms the CuL1 complex as a bidentate ligand with N, O donor atoms, while L2 only provides a single N donor atom, forming the CuL2 complex but retaining a free hydroxy group. Crystallographic analysis revealed a tetragonal crystal system for the Schiff base and orthorhombic for the complex. Electronic transition analysis supported by Density Functional Theory (DFT) studies indicated a distorted square plane geometry for the CuL1 and CuL2 complexes. The in vitro antibacterial assessment against E. coli and S. aureus revealed that the CuL1 and CuL2 complexes exhibited significantly better activity than Schiff bases HL1 and L2. Moreover, CuL2 exhibits greater bioactivity against both bacterial strains compared to CuL1. This difference could be attributed to a free hydroxy group, supported by computational analysis. Our findings suggest that the formation of complexes and the presence of free hydroxy groups may enhance the antibacterial activity of the drug.

Bioengineering of glucan coated silver nanoparticles as dynamic biomedical compound; in vitro and in vivo studies

The use of silver nanoparticles (AgNPs) gaining importance for the treatment of microbial infections and are in great demand due to their efficient broad antibacterial action but there is only one problem that silver nanoparticles can cause tissue damage. Therefore, the present study evaluated antimicrobial potential and intricacy of glucan coated silver nanoparticles in comparison with free silver nanoparticles. In this study, glucan coated silver nanoparticles (Glucan-AgNPs) by using Pleurotus spps. were characterized for their antimicrobial, minimum inhibitory concentration (MIC), biofilm inhibition, mutagenicity potential, hemolytic activities and histological examination through in vitro and in vivo analysis. The liver, kidney, intestine, and skin tissues were examined to gauge the adverse effects of the treatment method's toxicity by silver deposition. The results of this study have shown that mushroom's glucan extracted from Pleurotus spps. are excellent reducing agent and due to their best capping ability they reduce the toxicity of AgNPs and enhance their antimicrobial activities. The highest zone of inhibition was observed by Glucan-AgNPs from P. ostreatus (24 mm) against S. aureus while least zone of inhibition was resulted from Glucan-AgNPs from P. sapidus (14 mm) against B. subtilis. The results for biofilm inhibition showed excellent biofilm inhibition ability of Glucan-AgNPs. In results, maximum inhibition 95.2 % was observed by Glucan-AgNPs from P. ostreatus against S. aureus, while minimum inhibition 79.2 % by Glucan-AgNPs of P. sapidus against E. coli. Furthermore, Glucan-AgNPs treated mice showed no deposition and damage in the organs. Glucan-AgNPs has a higher efficacy in treating microbial infection.

Cross-Over Application of Algerian Dairy Lactic Acid Bacteria for the Design of Plant-Based Products: Characterization of Weissella cibaria and Lactiplantibacillus plantarum for the Formulation of Quinoa-Based Beverage

The food industry constantly seeks new starter cultures with superior characteristics to enhance the sensory and overall quality of final products. Starting from a collection of Algerian dairy (goat and camel) lactic acid bacteria, this work focused on the exploration of the technological and probiotic potential of Weissella cibaria (VR81 and LVT1) and Lactiplantibacillus plantarum R12 strains isolated from raw camel milk and fermented milk, respectively. These bioactive strains were selected for their high performance among ten other LAB strains and were used as starter cultures to develop a novel and nutritionally enhanced dairy-like plant-based yogurt using quinoa (Chenopodium quinoa Willd) as a raw matrix. The strains were evaluated for their antagonistic effects against Listeria innocua, Listeria ivanovii, Staphylococcus aureus, Escherichia coli, Salmonella enterica, and Pseudomonas aeruginosa, resilience to acidic and osmotic challenges, and tolerance to gastrointestinal mimicking conditions (i.e., pepsin and bile salt). Their aggregation and adhesion profiles were also analyzed. Furthermore, L. plantarum and W. cibaria were tested in single and co-culture for the fermentation and biocontrol of quinoa. The strains exhibited probiotic properties, including a high potential for biocontrol applications, specifically against L. innocua and P. aeruginosa (20 mm diameter zone with the neutralized cell-free supernatant), which disappeared after protease treatment, suggesting that bioactive peptides might be responsible for the observed antimicrobial effect. Additionally, they demonstrated resilience to acidic (pH 2) and osmotic challenges (1M sucrose), tolerance to gastro-intestinal conditions, as well as good aggregation and adhesion profile. Furthermore, the strains were able to produce metabolites of interest, such as exopolysaccharide (yielding up to 4.7 mg/mL) and riboflavin, reaching considerable production levels of 2.5 mg/L upon roseoflavin selection. The application of W. cibaria and L. plantarum as primary starters (both in single and co-culture) for fermenting quinoa resulted in effective acidification of the matrix (ΔpH of 2.03 units) and high-quality beverage production. in vivo challenge tests against L. innocua showed the complete inhibition of this pathogen when L. plantarum was included in the starter, either alone or in combination with W. cibaria. Both species also inhibited Staphylococcus and filamentous fungi. Moreover, the co-culture of mutant strains of L. plantarum R12d and W. cibaria VR81d produced riboflavin levels of 175.41 µg/100 g in fermented quinoa, underscoring their potential as starters for the fermentation, biopreservation, and biofortification of quinoa while also displaying promising probiotic characteristics.

Exploring the Potential of Nickel Oxide Nanoparticles Synthesized from Dictyota bartayresiana and its Biological Applications

The present study validates the impact of nickel oxide nanoparticles (NiONPs) biosynthesized from the brown seaweed Dictyota bartayresiana (DB) and its biological applications. The phytochemicals analyzed in the seaweed extract served as a reducing, capping or stabilizing agent in the formation of nanoparticles. UV visible spectrum of nickel oxide nanoparticles synthesized from DB (DB-NiONPs) represented a prominent peak at 392 nm which validates its formation. Fourier Transmission Infrared Spectroscopy (FT-IR) showcased the presence of functional groups in the biomolecules which aids in the stabilization of DB-NiONPs. The X-ray diffractometry (XRD) revealed the crystalline nature of DB-NiONPs and the particle size was calculated as 18.26 nm. The Scanning electron microscope (SEM) illustrates the irregularly shaped DB-NiONPs and the desired elements were depicted in energy dispersive X-ray (EDX) spectrum which confirms the purity of DB-NiONPs. The DB-NiONPs efficiently decolorised the Black B133 (BB133) dye to 86% in 25 min. The data of adsorption studies well fitted into Langmuir isotherm and pseudo-second order kinetic model. The thermodynamic study substantiated the spontaneous, feasible and endothermic process of adsorption. DB-NiONPs revealed enhanced antimicrobial, larvicidal and nematicidal activities against the selected microbes, larva of Culex pipens and juveniles of Meloidogyne incognita respectively. The phytotoxicity studies revealed the DB-NiONPs had a positive impact on the germination and growth of green gram seedlings.

Effect of folA gene in human breast milk-derived Limosilactobacillus reuteri on its folate biosynthesis

Introduction

Folate supplementation is crucial for the human body, and the chemically synthesized folic acid might have undesirable side effects. The use of molecular breeding methods to modify the genes related to the biosynthesis of folate by probiotics to increase folate production is currently a focus of research.

Methods

In this study, the folate-producing strain of Limosilactobacillus reuteri B1-28 was isolated from human breast milk, and the difference between B1-28 and folA gene deletion strain ΔFolA was investigated by phenotyping, in vitro probiotic evaluation, metabolism and transcriptome analysis.

Results

The results showed that the folate producted by the ΔFolA was 2-3 folds that of the B1-28. Scanning electron microscope showed that ΔFolA had rougher surface, and the acid-producing capacity (p = 0.0008) and adhesion properties (p = 0.0096) were significantly enhanced than B1-28. Transcriptomic analysis revealed that differentially expressed genes were mainly involved in three pathways, among which the biosynthesis of ribosome and aminoacyl-tRNA occurred in the key metabolic pathways. Metabolomics analysis showed that folA affected 5 metabolic pathways, involving 89 different metabolites.

Discussion

In conclusion, the editing of a key gene of folA in folate biosynthesis pathway provides a feasible pathway to improve folate biosynthesis in breast milk-derived probiotics.

Synthesis and characterization of citric acid-modified chitosan Schiff base with enhanced antibacterial properties for the elimination of Bismarck Brown R and Rhodamine B dyes from wastewater

In this study, a new chitosan Schiff base with surface modification using citric acid was synthesized for efficient removal of pernicious dyes, namely Bismarck Brown R (BBR) and Rhodamine B (RhB), from wastewater. The physicochemical properties of the modified chitosan Schiff base were comprehensively investigated. Adsorption studies demonstrated that BBR adsorption occurred through monolayer formation, while RhB adsorption proceeded via multilayer formation on the heterogeneous surface. The synthesized adsorbent exhibited exceptional dye removal efficiency, with a Langmuir saturation capacity of 348 ± 11.0 mg.g-1 for BBR and 145 ± 18.44 mg.g-1 for RhB. Isotherm data fitting revealed consistency with the Langmuir isotherm model for BBR and the Freundlich isotherm model for RhB. Notably, the modified chitosan Schiff base showcased enhanced antibacterial properties, effectively inhibiting both gram-positive and gram-negative bacteria. The study's findings underscore the potential of this novel chitosan-based Schiff base as an efficient adsorbent for the removal of various dyes from wastewater, emphasizing its versatility and practical applicability in water treatment processes.

Antibacterial, antibiofilm, and anticancer activity of silver-nanoparticles synthesized from the cell-filtrate of Streptomyces enissocaesilis

Silver nanoparticles (Ag-NPs) have a unique mode of action as antibacterial agents in addition to their anticancer and antioxidant properties. In this study, microbial nanotechnology is employed to synthesize Ag-NPs using the cell filtrate of Streptomyces enissocaesilis BS1. The synthesized Ag-NPs are confirmed by ultraviolet-visible (UV-Vis), Fourier transform infrared (FT-IR), X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Also, the effects of different factors on Ag-NPs synthesis were evaluated to set the optimum synthesis conditions. Also, the antibacterial, antibiofilm, and anticancer activity of Ag-NPs was assessed. The X-ray diffraction (XRD) analysis confirmed the crystalline nature of the sample and validated that the crystal structure under consideration is a face-centered cubic (FCC) pattern. The TEM examination displayed the spherical particles of the Ag-NPs and their average size, which is 32.2 nm. Fourier transform infrared spectroscopy (FTIR) revealed significant changes in functionality after silver nanoparticle dispersion, which could be attributed to the potency of the cell filtrate of Streptomyces enissocaesilis BS1 to act as both a reducing agent and a capping agent. The bioactivity tests showed that our synthesized Ag-NPs exhibited remarkable antibacterial activity against different pathogenic strains. Also, when the preformed biofilms of Pseudomonas aeruginosa ATCC 9027, Salmonella typhi ATCC 12023, Escherichia coli ATCC 8739, and Staphylococcus aureus ATCC 6598 were exposed to Ag NPs 50 mg/ml for 24 hours, the biofilm biomass was reduced by 10.7, 34.6, 34.75, and 39.08%, respectively. Furthermore, the Ag-NPs showed in vitro cancer-specific sensitivity against human breast cancer MCF-7 cell lines and colon cancer cell line Caco-2, and the IC50 was 0.160 mg/mL and 0.156 mg/mL, respectively. The results of this study prove the ease and efficiency of the synthesis of Ag-NPs using actinomycetes and demonstrate the significant potential of these Ag-NPs as anticancer and antibacterial agents.

Exploring the Bioactive Compounds in Some Apple Vinegar Samples and Their Biological Activities

Apple vinegar is highly recommended for nutrition due to its health benefits and bioactive components. However, the apple cultivar greatly influences the quality of the vinegar. In this research, our focus was on examining the impact of four different apple cultivars on the physicochemical attributes, chemical composition, as well as biological properties-including antidepressant and anti-inflammatory activities-of vinegar. Interestingly, the physicochemical properties of vinegar and the contents of acetic acid and polyphenols depend on the apple cultivars. HPLC chromatographic analysis showed that citric acid (820.62-193.63 mg/100 g) and gallic acid (285.70-54.40 µg/g) were mostly abundant in the vinegar samples. The in vivo results showed that administration of Golden Delicious apple vinegar (10 mL/kg) to adult Wistar rats reduced carrageenan-induced inflammation by 37.50%. The same vinegar sample exhibited a significant antidepressant effect by reducing the rats' immobility time by 31.07% in the forced swimming test. Due to its high acidity, Golden Delicious vinegar was found to be more effective against bacteria, particularly Bacillus subtilis and Candida albicans, resulting in a MIC value of 31.81 mg/mL. Furthermore, the antioxidant activity of various vinegar samples was found to be powerful, displaying optimal values of IC50 = 65.20 mg/mL, 85.83%, and 26.45 AAE/g in the DPPH, β-carotene decolorization and TAC assays, respectively. In conclusion, the apple cultivars used in this study impact the chemical composition and biological activities of vinegar, which may help demonstrate the importance of raw material selection for the production of vinegar.

First identification of potato tuber rot caused by Penicillium solitum, its silver nanoparticles synthesis, characterization and use against harmful pathogens

Potato is one of the highly consumed vegetable crop grown in different regions across Pakistan that is affected by fungal diseases. The current research was conducted to identify fungal pathogen causing mold-like disease of potato in Khyber Pakhtunkhwa (KP), Pakistan. For molecular identification and characterization of the fungal disease; potato tuber samples were collected followed by culturing on potato dextrose agar (PDA). Based on morphological features, the pathogen was identified as a Penicillium species. This result was obtained in 45 different isolates from potato tubers. Molecular identification was done using β-tubulin primers and ITS5 sequencing of 13 different isolates that releveled 98% homology with BLAST (GenBank accession no. KX958076) as Penicillium solitum (GenBank accession nos. ON307317; ON307475 and ON310801). Phylogenetic tree was constructed that showed Penicillium solitum prevalence along with Penicillium polonicum and Penicillium citrinum on potato tubers. Based on this, Penicillium solitum based silver nanoparticles (Ag NPs) were synthesized and characterized using UV-visible spectroscopy, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), energy dispersive X-ray (EDX) and field emission scanning electron microscopy (FE SEM). UV-analysis showed a characteristic peak at 410 nm confirming synthesis of Penicillium solitum based Ag NPs. This was further confirmed by XRD followed by EDX and SEM that showed face cubic crystal structure with Ag as major constituent of 18 nm formed spherical Ag NPs. FTIR showed band stretching of O-H, N-O and C-H of biological origin. Similarly, Penicillium solitum based Ag NPs presented strong anti-bacterial and anti-fungal activity at 0.5 level of significance LSD. According to our knowledge, this is the first report of Penicillium solitum identification in Pakistan, its Ag NPs synthesis and characterization to be used against pathogens of agricultural significance.

In vitro assessment of the immobilized mannanase enzyme against infection-causing Candida

Background: Developing an effective treatment for fungal infections is among contemporary medicine's challenges. In this study we aimed to eradicate mannan in pathogenic Candidae's cell walls using a nontoxic method, mannanase. Materials & Methods: We investigated the in vitro antifungal activities of mannanase immobilized on zinc oxide nanoparticles (ZnONps) and reduced graphene oxide nanoparticles (RGONps), as well as therapeutics against Candidae. Mannanase was purified from Bacillus invictae (activity: 5.15 EU/ml; range: 60-80%) and then immobilized it to ZnO and RGO to enhance its effectiveness. Results: Mannanase immobilized on ZnONps had the highest activity, with a value of 4.97 EU/ml, more effective than amphotericin-B. However, it could not reach the inhibition rates of other antifungals. Conclusion: Mannanase immobilized on ZnONps could be an effective fungicide for Candida biocontrol.

Synergistic antibacterial activity of carvacrol loaded chitosan nanoparticles with Topoisomerase inhibitors and genotoxicity evaluation

The increasing prevalence of antibiotic resistant bacteria is a significant healthcare crisis with substantial socioeconomic impact on global community. The development of new antibiotics is both costly and time-consuming prompting the exploration of alternative solutions such as nanotechnology which represents opportunities for targeted drug delivery and reduced MIC. However, concerns have arisen regarding genotoxic effects of nanoparticles on human health necessitating an evaluation of nanoparticle induced DNA damage. This study aimed to investigate the antibacterial potential of already prepared, characterized chitosan nanoparticles loaded with carvacrol and their potential synergism with Topoisomerase II inhibitors against S. aureus, E. coli and S. typhi using agar well diffusion, microdilution and checkerboard method. Genotoxicity was assessed through comet assay. Results showed that both alone and drug combinations of varying concentrations exhibited greater zones of inhibition at higher concentrations. Carvacrol nanoparticles combined with ciprofloxacin and doxorubicin significantly reduced MIC compared to the drugs used alone. The MIC50 values for ciprofloxacin were 35.8 µg/ml, 48.74 µg/ml, 35.57 µg/ml while doxorubicin showed MIC50 values of 20.79 µg/ml, 34.35 µg/ml, 25.32 µg/ml against S. aureus, E. coli and S. typhi respectively. The FICI of ciprofloxacin and doxorubicin with carvacrol nanoparticles found ≤ 0.5 Such as 0.44, 0.44,0.48 for ciprofloxacin and 0.45, 0.45, 0.46 for doxorubicin against S. aureus, E. coli and S. typhi respectively revealed the synergistic effect. The analysis of comet assay output images showed alteration of DNA at high concentrations. Our results suggested that carvacrol nanoparticles in combination with Topoisomerase inhibitors may prevent and control the emergence of resistant bacteria with reduced dose.

Investigating the Properties and Characterization of a Hybrid 3D Printed Antimicrobial Composite Material Using FFF Process: Innovative and Swift

Novel strategies and materials have gained the attention of researchers due to the current pandemic, the global market high competition, and the resistance of pathogens against conventional materials. There is a dire need to develop cost-effective, environmentally friendly, and biodegradable materials to fight against bacteria using novel approaches and composites. Fused filament fabrication (FFF), also known as fused deposition modeling (FDM), is the most effective and novel fabrication method to develop these composites due to its various advantages. Compared to metallic particles alone, composites of different metallic particles have shown excellent antimicrobial properties against common Gram-positive and Gram-negative bacteria. This study investigates the antimicrobial properties of two sets of hybrid composite materials, i.e., Cu-PLA-SS and Cu-PLA-Al, are made using copper-enriched polylactide composite, one-time printed side by-side with stainless steel/PLA composite, and second-time with aluminum/PLA composite respectively. These materials have 90 wt.% of copper, 85 wt.% of SS 17-4, 65 wt.% of Al with a density of 4.7 g/cc, 3.0 g/cc, and 1.54 g/cc, respectively, and were fabricated side by side using the fused filament fabrication (FFF) printing technique. The prepared materials were tested against Gram-positive and Gram-negative bacteria such as Escherichia coli (E. coli), Staphylococcus aureus (S. aureus), Pseudomonas aeruginosa (P. aeruginosa), Salmonella Poona (S. Poona), and Enterococci during different time intervals (5 min, 10 min, 20 min, 1 h, 8 h, and 24 h). The results revealed that both samples showed excellent antimicrobial efficiency, and 99% reduction was observed after 10 min. Hence, three-dimensional (3D) printed polymeric composites enriched with metallic particles can be utilized for biomedical, food packaging, and tissue engineering applications. These composite materials can also provide sustainable solutions in public places and hospitals where the chances of touching surfaces are higher.

Hydrophobic, Sustainable, High-Barrier Regenerated Cellulose Film via a Simple One-Step Silylation Reaction

With the increasing importance of environmental protection, high-performance biopolymer films have received considerable attention as effective alternatives to petroleum-based polymer films. In this study, we developed hydrophobic regenerated cellulose (RC) films with good barrier properties through a simple gas-solid reaction via the chemical vapor deposition of alkyltrichlorosilane. RC films were employed to construct a biodegradable, free-standing substrate matrix, and methyltrichlorosilane (MTS) was used as a hydrophobic coating material to control the wettability and improve the barrier properties of the final films. MTS readily coupled with hydroxyl groups on the RC surface through a condensation reaction. We demonstrated that the MTS-modified RC (MTS/RC) films were optically transparent, mechanically strong, and hydrophobic. In particular, the obtained MTS/RC films exhibited a low oxygen transmission rate of 3 cm³/m² per day and a low water vapor transmission rate of 41 g/m² per day, which are superior to those of other hydrophobic biopolymer films.

Preparation, Characterization, and Evaluation of Curcumin-Graphene Oxide Complex-Loaded Liposomes against Staphylococcus aureus in Topical Disease

This study describes the development and characterization of curcumin with graphene oxide complex (CUR + GO) loaded into liposomes for treating skin disease. The developed complex was characterized by X-ray diffraction and showed a broad halo pattern, confirming the amorphous nature of the resulting complex. Furthermore, scanning electron microscopy revealed the irregular porous morphology of the complex-highlighting loss of the crystallinity and the emergence of the amorphous phase. Additionally, the liposomes showed long-term stability at 2-8 °C and 25 ± 2 °C/60 ± 5%RH with nonsignificant variations in the particle size, polydispersity index, and zeta potential. Overall, optical and high-resolution transmission electron microscopy images of liposomes showed a consistent shape, and no aggregation with uniform particle size distribution was observed. Furthermore, the cumulative drug release in the first 6 h was 71.24 and 64.24% for CUR-loaded liposomes and CUR-GO-loaded liposomes, respectively. The lower value of drug release might be attributed to the complex development. The drug release model found the first order with non-Fickian diffusion process, which is often observed at higher n > 0.5. The antibacterial activity of the CUR with GO-loaded liposome (D2) offered higher anti-microbial activity over other formulations against the mentioned bacterial microorganism that causes skin diseases.

Prominent bactericidal characteristics of silver-copper nanocomposites produced via pulse laser ablation

This paper reports the characterization and antibacterial performance evaluation of some spherical and stable crystalline silver (Ag)/copper (Cu) nanocomposites (Ag-CuNCs) prepared in deionized water (DIW) using pulse laser ablation in liquid (PLAL) method. The influence of various laser fluences (LFs) on the structural, morphological, optical and antibacterial properties of these NCs were determined. The UV-Vis absorbance of these NCs at 403 nm and 595 nm was gradually increased accompanied by a blue shift. XRD patterns disclosed the nucleation of highly crystalline Ag-CuNCs with their face centered cubic lattice structure. TEM images showed the existence of spherical NCs with size range of 3-20 nm and lattice fringe spacing of approximately 0.145 nm. EDX profiles of Ag-CuNCs indicated their high purity. The antibacterial effectiveness of the Ag-CuNCs was evaluated by the inhibition zone diameter (IZD) and optical density (OD600) tests against Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacteria. The proposed NCs revealed the IZD values in the range of 22-26 mm and 20-25 mm when tested against E. coli and S. aureus bacteria, respectively. The Ag-CuNCs prepared at LF of 14.15 J/cm² revealed the best bactericidal activity. It is established that by controlling the laser fluence the bactericidal effectiveness of the Ag-CuNCs can be tuned.

Therapeutic Intervention for Various Hospital Setting Strains of Biofilm Forming Candida auris with Multiple Drug Resistance Mutations Using Nanomaterial Ag-Silicalite-1 Zeolite

Candida auris (C. auris), an emerging multidrug-resistant microorganism, with limited therapeutical options, is one of the leading causes of nosocomial infections. The current study includes 19 C. auris strains collected from King Fahd Hospital of the University and King Fahad Specialist Hospital in Dammam, identified by 18S rRNA gene and ITS region sequencing. Drug-resistance-associated mutations in ERG11, TAC1B and FUR1 genes were screened to gain insight into the pattern of drug resistance. Molecular identification was successfully achieved using 18S rRNA gene and ITS region and 5 drug-resistance-associated missense variants identified in the ERG11 (F132Y and K143R) and TAC1B (H608Y, P611S and A640V) genes of C. auris strains, grouped into 3 clades. The prophylactic and therapeutic application of hydrothermally synthesized Ag-silicalite-1 (Si/Ag ratio 25) nanomaterial was tested against the 3 clades of clinical C. auris strains. 4wt%Ag/TiZSM-5 prepared using conventional impregnation technique was used for comparative study, and nano formulations were characterized using different techniques. The antibiofilm activity of nanomaterials was tested by cell kill assay, scanning electron microscopy (SEM) and light microscopy. Across all the clades of C. auris strains, 4 wt%Ag/TiZSM-5 and Ag-silicalite-1 demonstrated a significant (p = 1.1102 × 10-16) inhibitory effect on the biofilm's survival rate: the lowest inhibition value was (10%) with Ag-silicalite-1 at 24 and 48 h incubation. A profound change in morphogenesis in addition to the reduction in the number of C.auris cells was shown by SEM and light microscopy. The presence of a high surface area and the uniform dispersion of nanosized Ag species displays enhanced anti-Candida activity, and therefore it has great potential against the emerging multidrug-resistant C. auris.

Daphnia magna and Gammarus pulex, novel promising agents for biomedical and agricultural applications

Various studies have shown the importance of using different types of Zooplankton biomasses as an additional substance in the diet of fish. In addition, the drainage water of the fish cultures could be used in plant irrigation. In this study, biomasses of water flea Daphnia magna and Gammarus pulex collected and tested, for the first time, their effect against pathogenic microorganisms and on plant germination. The results showed significant antibacterial activity of D. magna and G. pulex against Staphylococcus aureus and Pseudomonas aeruginosa bacteria, as well as antifungal activity against Alternaria solani and Penicillium expansum, which gives the possibility to be used as biocontrol against these bacteria and plant pathogenic fungi. Furthermore, both animals showed positive activity in the germination rate of Vicia faba seed, reaching 83.0 ± 3.5 and 86.0 ± 3.8%, respectively. In conclusion, the biomasses of D. magna and G. pulex are promising and effective agents for their use in the medical field against some pathogenic microbes and as stimulators of plant growth.

Silver nanoparticles coated medical fiber synthesized by surface engineering with bio-inspired mussel powered polydopamine: An investigated antimicrobial potential with bacterial membrane leakage reaction mechanism

Nature frequently provides narrative biological motivation. This study reports on oxygen-induced auto-polymerization of dopamine on the surface of medical cotton fibers to develop super-hydrophobic surfaces. The versatile reactivity of polydopamine (PDA) surfactant was adopted to deposit silver nanoparticles (Ag NPs) on the surface of medical cotton. SEM micrographs demonstrated the uniform deposition of Ag NPs. The antimicrobial reactivity confirmed the potential of Ag-loaded PDA-cotton fiber to hinder the growth of some tested pathogenic microbes. Silver-loaded PDA-cotton fibers showed the most promising zone of inhibition (ZOI) against (33.5 mm), Candida tropicalis (30.2 mm), and Aspergillus niger (30.2 mm). In growth curve assay, after addition of silver-loaded PDA-cotton fibers, the O.D. were lower (0.365 nm), showing the repression impact on S. aureus. It was observed that the quantity of cellular protein discharged from S. aureus is directly proportional to the concentration of silver-loaded PDA-cotton fibers and found to be 159.68 μg/ml after the treatment with silver-loaded PDA-cotton fibers (2 cm × 2 cm), which proves the antibacterial characteristics of the synthesied silver-loaded PDA-cotton fibers. The obtained antimicrobial results gives solution in treating pathogenic microbes and the application of silver-loaded PDA-cotton fibers as wound dressing in biomedical and pharmaceutical fields.

Surface disinfection with silver loaded pencil graphite prepared with green UV photoreduction technique

Carbon-based materials have been studied for their antimicrobial properties. Previously, most antimicrobial studies are investigated with suspended nanoparticles in a liquid medium. Most works are often carried out with highly ordered pyrolytic graphite. These materials are expensive and are not viable for mass use on high-touch surfaces. Additionally, highly antimicrobial silver nanoparticles are often incorporated onto substrates by chemical reduction. At times, harmful chemicals are used. In this work, low-cost graphite pencils are mechanically exfoliated and transferred onto Si substrates. The sparsely-covered graphite flakes are treated by either plasma O₂or UV irradiation. Subsequently, Ag is photo reduced in the presence of UV onto selected graphite flake samples. It is found that graphite flake surface topography and defects are dependent on the treatment process. High surface roughness and (defects density,I_D/I_G) are induced by plasma O₂follows by UV and pristine graphite flake as follows: 6.45 nm (0.62), 4.96 nm (0.5), 3.79 nm (0.47). Antimicrobial tests withE. colireveal high killing efficiency by photoreduced Ag-on-graphite flake. The reversible effect of Ag leaching can be compensated by repeating the photoreduction process. This work proposes that UV treatment is a promising technique over that of plasma O₂in view that the latter treated surface could repel bacteria resulting in lower bacteria-killing efficiency.

In situ growth zeolite imidazole framework materials on chitosan for greatly enhanced antibacterial effect

Zeolite imidazole framework materials (ZIFs) are a new type of antibacterial material with high chemical and thermal stability, and good antibacterial effect. However, powder ZIFs materials have the disadvantages of difficult separation and easy aggregation, which limit their application. In this work, ZIFs and chitosan (CS) were compounded by in-situ growth method to prepare a new antibacterial agent. The synergism of CS and ZIFs can effectively promote antibacterial effect compared with CS and pristine ZIFs, and CS/ZIF-67(1:6) has the best antibacterial activity, and its inhibitory rate (in 15 h) of E. coli is 96.75%, and the inhibitory rate of S. aureus reaches as high as 100%. This composites can effectively cause bacterial cell membrane rupture and leakage of internal nucleic acid and protein, leads to achieve antibacterial effect, and also exhibit excellent long-term (at least 5 days) antibacterial properties, the leaching of cobalt is below than 0.5 mg·L^-1, and this composites are with excellent bio-compatibility.