Sulfate radical-based oxidation of the antibiotics sulfamethoxazole, sulfisoxazole, sulfathiazole, and sulfamethizole: The role of five-membered heterocyclic rings

Removal of sulfonamides by persulfate-based advanced oxidation: A mini review

Sulfonamides (SAs) are known for their persistence and have become one of the most frequently detected pharmaceuticals and personal care products (PPCPs) in the environments. The widespread presence of SAs in natural waters, wastewater, soil, and sediment has prompted growing concern due to their potential threats to both human health and ecological systems. Persulfate-based advanced oxidation processes (PS-AOPs) have emerged as a promising technology for effectively mitigating the presence of these pollutants in the environment. This review offers a comprehensive overview of the degradation of SAs by PS-AOPs. The various activation methods of persulfate for the purpose of removing SAs are elaborated upon in detail. The factors influencing the removal efficiency of SAs through PS-AOPs is thoroughly discussed. Additionally, the conceivable mechanisms and degradation pathways associated with various types of SAs are discussed. Lastly, existing challenges are identified, and future prospects pertaining to the utilization of PS-AOPs for efficient SA removal are presented.

Environmental and toxicological aspects of sulfamethoxazole photodegradation in the presence of oxidizing agents

Sulfamethoxazole (SMX) is a popular active substance, which is extensively applied to treat bacterial infections in humans and animals. Due to its widespread use, SMX enters the natural environment, where it can undergo degradation. Similarly to other emerging contaminants, SMX photodegradation and the use of oxidants in wastewater treatment processes can lead to the formation of potentially adverse transformation products for ecosystems. This study investigated the efficiency of SMX photodegradation in the presence of oxidizing agents (H2O2 and Fenton reagent). The potential environmental consequences of degradation product formation were analyzed based on experimental toxicity characterization. Standardized tests employing diverse organisms were utilized: Alivibrio fischeri (Microtox®), Daphnia magna (Daphtoxkit F®), and Lemna minor (Lemna sp. GIT). The potential environmental impact of the products identified in the reaction mixtures was evaluated using parameters describing aqueous solubility, hydrophobicity, toxicity, bioconcentration, persistence, and mobility. The analysis revealed that photodegradation produces transformation products with higher toxicity than SMX, as confirmed by in vitro tests of the reaction mixtures. Most of the detected compounds were found to have low mobility potential. The formation rates of key environmentally relevant transformation products, such as 1,4-benzoquinone, aniline, and phenol, were also discussed. The changes in total organic carbon (TOC) affected by photodegradation under the influence of the considered oxidizing agents were characterized.

New insight into linear substituents influencing electrooxidation treatment of sulfonamide antibiotics: Linking kinetics, pathways, toxicity, and active species with density functional theory

Linear substituents, despite their simpler structures compared to heterocyclic ones, exhibit distinct chemical behaviors. Using sulfacetamide (SAM) and sulfaguanidine (SGD) as model compounds, we assessed the impact of these substituents on degradation efficiency, active species identification, reaction pathways, and intermediate toxicity during electrooxidation in water. Through density functional theory, we elucidated the mechanisms, focusing on electronic structural changes and interactions with active species. Notably, the acetyl group in SAM (0.1016) acquired more electrons than the guanidyl group in SGD (0.0281), resulting in SAM having a higher free energy change (ΔG=15.06kcal/mol) compared to SGD (ΔG=9.59kcal/mol). This difference makes SAM less likely to undergo direct electron transfer and less reactive towards hydroxyl radical addition, leading to slower degradation rates. The applied potential notably increased SAM's sensitivity to hydroxyl radicals. Both the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) were contributed by the parent fragment, facilitating electrophilic reactions mainly on the aniline part. Seventeen intermediate products and three major transformation pathways were identified, emphasizing aniline group destruction before discharge. This research enhances understanding of the degradation and environmental fate of sulfonamides, providing valuable insights for optimizing pollutant degradation and discharge reduction.

Mechanism of Sulfate Radical Formation on Activation of Persulfate Using Doped Metal Oxide and Its Role in Degradation of Tartrazine Dye in an Aqueous Solution

Degradation of tartrazine dye (TZD) was performed in this study using sulfate radicals (SO4•-) generated from the activated sodium persulfate (SPS) using Fe3O4@PDA nanoparticles (NPs). The NPs were characterized by Fourier transform infrared (FTIR), vibrating sample magnetometer (VSM), X-ray diffraction (XRD), high-resolution scanning electron microscopy (HR-SEM), X-ray photoelectron spectroscopy (XPS), high resolution transmission electron microscopy (HRTEM), and energy-dispersive X-ray spectroscopy (EDX). The average particle size of the NPs was 17.49 nm from XRD analysis. The presence of the C-N group at 1129 cm-1 in FTIR and 2.54% of the nitrogen element identified from the EDX plot was evidence of successful doping of polydopamine (PDA). Superparamagnetic nature with a decrease in the Ms value to 42.015 emu/g after doping was determined. Doping was further confirmed by XPS analysis with binding energies at 399.68 and 400.99 eV. The average particle size from HRTEM analysis was 21.47 nm with a lattice spacing of 0.30 nm. Turnover number (TON) and turnover frequency (TOF) values for Fe3O4@PDA were determined to be 3.72 and 0.0248 min-1 with respect to different systems, respectively. Optimum conditions for the Fe3O4@PDA/SPS system were 50 ppm TZD, 0.9 g/L catalyst, 12 mM SPS, and pH 4 with 94.68% efficiency in 150 min. The inhibition effect of ions in TZD degradation followed the order humic acid Collapse

Key Words Collapse

MESH Headings Collapse

Grants Collapse

Affiliation(s)

Fetcia Jackulin Department of Chemical Engineering, Sri Sivasubramaniya Nadar College of Engineering, Kalavakkam 603 110, Tamil Nadu, India Centre of Excellence in Water Research (CEWAR), Sri Sivasubramaniya Nadar College of Engineering, Kalavakkam 603 110, Tamil Nadu, India
Ponnusamy Senthil Kumar Centre for Pollution Control and Environmental Engineering, School of Engineering and Technology, Pondicherry University, Kalapet, Puducherry 605014, India
Chitra Boobalan Department of Chemical Engineering, Sri Sivasubramaniya Nadar College of Engineering, Kalavakkam 603 110, Tamil Nadu, India Centre of Excellence in Water Research (CEWAR), Sri Sivasubramaniya Nadar College of Engineering, Kalavakkam 603 110, Tamil Nadu, India
Gayathri Rangasamy Department of Civil Engineering, Faculty of Engineering, Karpagam Academy of Higher Education, Pollachi Main Road, Eachanari Post, Coimbatore 641021, Tamil Nadu, India

Collapse

Insight in sulfadiazine degradation by peroxymonosulfate activated by polydopamine-derived nitrogen-doped carbon supported CoFe2O4: Co leaching inhibition and degradation enhancement

Heterogeneous catalyst-mediated sulfate radical-based advanced oxidation processes (SR-AOPs) showed excellent performance during antibiotics degradation. Spinel was a promising catalyst for SR-AOPs, but the secondary contamination due to metal ions leaching needed to be addressed. And the destruction of catalyst structure could lead to the reduction of catalytic activity and the difficulty of recovery. Thus, a novel nitrogen-doped carbon (NC)-supported CoFe2O4 (CoFe2O4@NC) was synthesized as the activator of PMS for sulfadiazine (SDZ) degradation under low Co leaching conditions. The consequences indicated that the CoFe2O4@NC/PMS system exhibited higher PMS decomposition efficiency and reaction stoichiometry efficiency than the bare CoFe2O4/PMS systems (CoFe2O4-180 and CoFe2O4-800), which in turn demonstrated a better SDZ removal performance. Under the condition of CoFe2O4@NC dosage 0.1 g/L, PMS concentration 0.5 mM, solution pH 6.8 and temperature 25°C, SDZ (20 mg/L) was almost completely degraded within 60 min. XPS analysis showed that the NC not only protected and stabilized CoFe2O4, but also provided additional active sites for PMS activation. During SDZ degradation, SO4•-, HO•, •O2- and 1O2 were involved in the reaction, among which SO4• and HO• made the main contribution. Meanwhile, CoFe2O4@NC could be recovered by magnetic separation, and showed great stability (Co leaching 0.852 mg/L) and reusability. In the fifth cycle experiment, 85.02 % SDZ degradation was obtained. Based on the detected intermediates (12 intermediates were identified) and DFT calculations, possible degradation pathways for SDZ in CoFe2O4@NC/PMS were proposed. The condensed dual descriptor indicated that the N7, N11, and C15 atoms on SDZ molecule were the main sites of electrophilic attack, which was consistent with the detected intermediates. The degradation of SDZ involved hydroxylation of NH2, cleavage of S-N and extrusion of SO2. This study explored the improvements made in NC support material to catalytic performance and resistance to dissolution of spinel, providing new insights for subsequent researches.

A review on recent advancements in the treatment of polyaromatic hydrocarbons (PAHs) using sulfate radicals based advanced oxidation process

Polyaromatic hydrocarbons (PAHs) are the most persistent compounds that get contaminated in the soil and water. Nearly 16 PAHs was considered to be a very toxic according US protection Agency. Though its concentration level is low in the environments but the effects due to it, is enormous. Advanced Oxidation Process (AOP) is an emergent methodology towards treating such pollutants with low and high molecular weight of complex substances. In this study, sulfate radical (SO4‾•) based AOP is emphasized for purging PAH from different sources. This review essentially concentrated on the mechanism of SO4‾• for the remediation of pollutants from different sources and the effects caused due to these pollutants in the environment was reduced by this mechanism is revealed in this review. It also talks about the SO4‾• precursors like Peroxymonosulfate (PMS) and Persulfate (PS) and their active participation in treating the different sources of toxic pollutants. Though PS and PMS is used for removing different contaminants, the degradation of PAH due to SO4‾• was presented particularly. The hydroxyl radical (•OH) mechanism-based methods are also emphasized in this review along with their limitations. In addition to that, different activation methods of PS and PMS were discussed which highlighted the performance of transition metals in activation. Also this review opened up about the degradation efficiency of contaminants, which was mostly higher than 90% where transition metals were used for activation. Especially, on usage of nanoparticles even 100% of degradation could be able to achieve was clearly showed in this literature study. This study mainly proposed the treatment of PAH present in the soil and water using SO4‾• with different activation methodologies. Particularly, it emphasized about the importance of treating the PAH to overcome the risk associated with the environment and humans due to its contamination.

Degradation of trichloroacetic acid by Fe/Ni bimetallic reactive PMS with hierarchical layered structure

Overuse of chlorinated disinfectants leads to a significant accumulation of disinfection by-products. Trichloroacetic acid (TCA) is a typical carcinogenic disinfection by-product. The efficacy of the conventional degradation process is reduced by the complex nature of its structure, causing a yearly increase in its prevalence within the ecological environment and consequent infliction of significant harm. In this paper, TCA was chosen as the research subject, Fe/Ni bimetallic nanoparticles were employed as the reducing catalyst, ZIF-8@HMON as the catalytic carrier combined with Fe/Ni nanoparticles, and peroxymonosulfate (PMS) was introduced to construct the reducing-advanced oxidation synergistic system and investigated the effect of this system on the degradation performance and degradation pathway of TCA. Various characterization techniques, including TEM, SEM, XRD, FT-IR, XPS, BET, were employed to investigate the morphology, element composition and structure of composite materials analysis. Moreover, the conditions for TCA degradation can be optimized by changing the experimental environment. The results showed that 25 mg of composite catalyst (mole ratio Fe: Ni = 1:1) and 10 mg of PMS effectively degraded TCA within 20-80 mg/L range at pH = 3 and 55 °C, achieving maximum degradation within 20 min. Finally, the potential pathways of TCA degradation were analyzed using EPR and LC-MS, and the corresponding reaction mechanisms were proposed.

Ketoprofen products induced photosensitization of sulfonamide antibiotics: The cocktail effects of pharmaceutical mixtures on their photodegradation

Indirect photolysis induced by naturally occurring sensitizers constitutes an important pathway accounting for the transformation and fate of many recalcitrant micropollutants in sunlit surface waters. However, the photochemical transformation of micropollutants by photosensitizing pharmaceuticals has been less investigated. In this study, we demonstrated that the non-steroidal anti-inflammatory drug ketoprofen (KTF) and its photoproducts, 3-acetylbenzophenone (AcBP) and 3-ethylbenzophenone (EtBP), could sensitize the photodegradation of coexisting sulfonamide antibiotics, e.g., sulfamethoxazole (SMX), under artificial 365 nm ultraviolet (UV) and sunlight irradiation. Key reactive species including triplet excited state and singlet oxygen (1O2) responsible for photosensitization were identified by laser flash photolysis (LFP) and electron paramagnetic resonance (EPR) techniques, respectively. High-resolution mass spectrometry (HRMS) and structure-related reactivity analyses revealed that the sensitized photolysis of SMX occurred mainly through single electron transfer. The rate constants of sulfonamides sensitized by AcBP photolysis followed the order of sulfisoxazole (SIX)＞sulfathiazole (STZ)＞SMX＞sulfamethizole (SMT). Exposure to sunlight also enhanced the photolysis of SMX in the presence of KTF or AcBP, and water matrix had limited impact on such process. Overall, our results reveal the feasibility and mechanistic aspects of photosensitization of coexisting contaminants by pharmaceuticals (or their photoproducts) and provide new insights into the cocktail effects of pharmaceutical mixtures on their photochemical behaviors in aqueous environment.

Removal of sulfonamide antibiotics by a sonocatalytic Fenton-like reaction: Efficiency and mechanisms

With the widespread use of sulfonamide antibiotics (SAs), SAs are detected as residues in aquatic environments, posing a serious threat to human life and safety. Because of their high water solubility, fast transmission rate, and strong antibacterial properties, the safe disposal of SAs has become a key constraint for water quality assurance. Therefore, an ultrasound (US)-assisted zero-valent iron (ZVI)/persulfate (PS) system was proposed to explore the rapid and effective degradation of SAs. Comparative experiments were performed to study the removal of sulfadiazine (SDZ) by US, ZVI, PS, US/ZVI, US/PS, ZVI/PS, and US-ZVI/PS systems, respectively. Experimental results indicated that the highest removal efficiency of SDZ was ahieved in US-ZVI/PS system (97.4%), which were 2-44 times higher than that in other systems. Furthermore, the degradation efficiency of five typical SAs was achieved over 95%, demonstrating the effectiveness of the US ZVI/PS system for SAs removal. Also, quantum chemical computations for potential reactive sites of SAs and intermediate product detection by HPLC‒MS/MS were performed. The radical attack on active sites of SAs, such as N atom (number 7), was the main reason for SAs removal in US-ZVI/PS system. Besides, the common degradation pathways of six typical SAs were defined as S-N bond cleavage, C-N bond cleavage, benzene ring hydroxylation, aniline oxidation, and R substituent oxidation. Interestingly, the unique pathway of "SO2 group extraction" was observed in the degradation of six-membered ring SAs. Therefore, the US-ZVI/PS system is a promising and cost-effective method for the removal of SAs and other refractory pollutants.

Carbocatalysts for Enhancing Permanganate Oxidation of Sulfisoxazole

Permanganate (Mn(VII)) is extensively applied in water purification due to its stability and ease of handling, but it is a mild oxidant for trace organic contaminants (TrOCs). Hence, there is significant interest in strategies for enhancing reaction kinetics, especially in combination with efficient and economical carbocatalysts. This study compared the performance of four carbocatalysts (graphite, graphene oxide (GO), reduced-GO (rGO), and nitrogen-doped rGO (N-rGO)) in accelerating sulfisoxazole (SSX) oxidation by Mn(VII) and found that GO exhibited the greatest catalytic performance. Besides, the Mn(VII)/GO system shows desirable capacities to remove a broad spectrum of TrOCs. We proposed that the degradation of SSX in Mn(VII)-GO suspensions follows two routes: (i) direct oxidation of SSX by Mn species [both Mn(VII) and in situ formed MnO2(s)] and (ii) a carbocatalyst route, where GO acts as an electron mediator, accepting electrons from SSX and transferring them to Mn(VII). We developed a mathematical model to show the contribution of each parallel pathway and found one-electron transfer is primarily responsible for accelerating SSX removal in the Mn(VII)/GO system. Findings in this study showed that GO provides a simple and effective strategy for enhancing the reactivity of Mn(VII) and provided mechanistic insights into the GO-catalyzed redox reaction between SSX and Mn(VII).

Investigating sulfonamides - Human serum albumin interactions: A comprehensive approach using multi-spectroscopy, DFT calculations, and molecular docking

The environmental and health risks associated with sulfonamide antibiotics (SAs) are receiving increasing attention. Through multi-spectroscopy, density functional theory (DFT), and molecular docking, this study investigated the interaction features and mechanisms between six representative SAs and human serum albumin (HSA). Multi-spectroscopy analysis showed that the six SAs had significant binding capabilities with HSA. The order of binding constants at 298 K was as follows: sulfadoxine (SDX): 7.18 × 105 L mol-1 > sulfamethizole (SMT): 6.28 × 105 L mol-1 > sulfamerazine (SMR): 2.70 × 104 L mol-1 > sulfamonomethoxine (SMM): 2.54 × 104 L mol-1 > sulfamethazine (SMZ): 3.06 × 104 L mol-1 > sulfadimethoxine (SDM): 2.50 × 104 L mol-1. During the molecular docking process of the six SAs with HSA, the binding affinity range is from -7.4 kcal mol-1 to -8.6 kcal mol-1. Notably, the docking result of HSA-SDX reached the maximum of -8.6 kcal mol-1, indicating that SDX may possess the highest binding capacity to HSA. HSA-SDX binding, identified as a static quenching and exothermic process, is primarily driven by hydrogen bonds (H bonds) or van der Waals (vdW) interactions. The quenching processes of SMR/SMZ/SMM/SDX/SMT to HSA are a combination of dynamic and static quenching, indicating an endothermic reaction. Hydrophobic interactions are primarily accountable for SMR/SMZ/SMM/SDX/SMT and HSA binding. Competition binding results revealed that the primary HSA-SAs binding sites are in the subdomain IB of the HAS structure, consistent with the results of molecule docking. The correlation analysis based on DFT calculations revealed an inherent relationship between the structural chemical features of SAs and the binding performance of HSA-SAs. The dual descriptor (DD) and the electrophilic Fukui function were found to have a significant relationship (0.71 and -0.71, respectively) with the binding constants of HSA-SAs, predicting the binding performance of SAs and HSA. These insights have substantial scientific value for evaluating the environmental risks of SAs as well as understanding their impact on biological life activities.

Clarification of the role of singlet oxygen for pollutant abatement during persulfate-based advanced oxidation processes: Co3O4@CNTs activated peroxymonosulfate as an example

Singlet oxygen (1O2) has often been identified by the popularly used quenching method as a more important reactive species (RS) than sulfate radicals (SO4•-) and hydroxyl radicals (•OH) for pollutant abatement during persulfate-based advanced oxidation processes (PS-AOPs), especially those activated by carbon-based catalysts. However, latest studies have demonstrated that the quenching method actually can often mislead the interpretations of the role of RS for pollutant abatement during AOPs due to various confounding effects caused by adding high-concentration quenchers in the system. To clarify the role of 1O2 in PS-AOPs, this study developed a probe compound-based experimental and kinetic model to quantify the concentrations and exposures of 1O2, SO4•-, and •OH, as well as their relative contributions to pollutant abatement during a cobalt oxide incorporated carbon nanotubes activated peroxymonosulfate (Co3O4@CNTs/PMS) process. Results show that during the Co3O4@CNTs/PMS process, the exposures and transient concentrations of 1O2 were about 19.6 and 41.3 times higher than those of SO4•- and •OH, respectively. However, the relative contribution of 1O2 to the abatement of most pollutants tested in this study (e.g., sulfisoxazole, sulfamethoxyprazine, trimethoprim, and metoprolol) is generally negligible (f1O2 ≤ 8%) compared to that of SO4•- and •OH ( [Formula: see text]  = 15%-98% and f•OH = 2%-78%) because of the significantly lower reactivity of 1O2 with these compounds than that of SO4•- and •OH. Reasons for misidentifying 1O2 as the dominant RS for pollutant abatement by the quenching method were then analyzed based on reaction kinetics principles. The results of this study highlight that while 1O2 can be generated in significant amounts and be present at higher concentrations than SO4•- and •OH in PS-AOP systems, 1O2 is unlikely to be the dominant RS for the abatement of most pollutants during the PS-AOPs because of its weak and selective oxidation capacity, and caution should be taken when using the quenching method to evaluate the role of RS for pollutant abatement by the PS-AOPs.

Rapid and Sensitive Detection of Sulfamethizole Using a Reusable Molecularly Imprinted Electrochemical Sensor

Efficient methods for monitoring sulfonamides (SAs) in water and animal-source foods are of great importance to achieve environmental safety and protect human health. Here, we demonstrate a reusable and label-free electrochemical sensor for the rapid and sensitive detection of sulfamethizole based on an electropolymerized molecularly imprinted polymer (MIP) film as the recognition layer. To achieve effective recognition, monomer screening among four kinds of 3-substituted thiophenes was performed by computational simulation and subsequent experimental evaluation, and 3-thiopheneethanol was finally selected. MIP synthesis is very fast and green, and can be in situ fabricated on the transducer surface within 30 min in an aqueous solution. The preparation process of the MIP was characterized by electrochemical techniques. Various parameters affecting MIP fabrication and its recognition response were investigated in detail. Under optimized experimental conditions, good linearity in the range of 0.001-10 μM and a low determination limit of 0.18 nM were achieved for sulfamethizole. The sensor showed excellent selectivity, which can distinguish between structurally similar SAs. In addition, the sensor displayed good reusability and stability. Even after 7 days of storage, or being reused 7 times, higher than 90% of the initial determination signals were retained. The practical applicability of the sensor was also demonstrated in spiked water and milk samples at the nM determination level with satisfactory recoveries. Compared to relevant methods for SAs, this sensor is more convenient, rapid, economical, and eco-friendly, and had comparable or even higher sensitivity, which offered a simple and efficient method for SA detection.

Magnetic Nanocomposites for the Remote Activation of Sulfate Radicals for the Removal of Rhodamine B

The widespread presence of numerous organic contaminants in water poses a threat to the ecological environment and human health. Magnetic nanocomposites exposed to an alternating magnetic field (AMF) have a unique ability for magnetically mediated energy delivery (MagMED) resulting from the embedded magnetic nanoparticles; this localized energy delivery and associated chemical and thermal effects are a potential method for removing contaminants from water. This work developed a novel magnetic nanocomposite-a polyacrylamide-based hydrogel loaded with iron oxide nanoparticles. For this magnetic nanocomposite, persulfate activation and the contamination removal in water were investigated. Magnetic nanocomposites were exposed to AMF with a model organic contaminant, rhodamine B (RhB) dye, with or without sodium persulfate (SPS). The removal of RhB by the nanocomposite without SPS as a sorbent was found to be proportional to the concentration of magnetic nanoparticles (MNPs) in the nanocomposite. With the addition of SPS, approximately 100% of RhB was removed within 20 min. This removal was attributed primarily to the activation of sulfate radicals, triggered by MNPs, and the localized heating resulted from the MNPs when exposed to AMF. This suggests that this magnetic nanocomposite and an AMF could be a unique environmental remediation technique for hazardous contaminants.

Sulfate radicals-based advanced oxidation processes for the degradation of pharmaceuticals and personal care products: A review on relevant activation mechanisms, performance, and perspectives

Owing to the rapid development of modern industry, a greater number of organic pollutants are discharged into the water matrices. In recent decades, research efforts have focused on developing more effective technologies for the remediation of water containing pharmaceuticals and personal care products (PPCPs). Recently, sulfate radicals-based advanced oxidation processes (SR-AOPs) have been extensively used due to their high oxidizing potential, and effectiveness compared with other AOPs in PPCPs remediation. The present review provides a comprehensive assessment of the different methods such as heat, ultraviolet (UV) light, photo-generated electrons, ultrasound (US), electrochemical, carbon nanomaterials, homogeneous, and heterogeneous catalysts for activating peroxymonosulfate (PMS) and peroxydisulfate (PDS). In addition, possible activation mechanisms from the point of radical and non-radical pathways are discussed. Then, biodegradability enhancement and toxicity reduction are highlighted. Comparison with other AOPs and treatment of PPCPs by the integrated process are evaluated as well. Lastly, conclusions and future perspectives on this research topic are elaborated.

Promoting selective water decontamination via boosting activation of periodate by nanostructured Ru-supported Co3O4 catalysts

The superior catalytic efficiency of ruthenium (Ru)-based nanocomposites in advanced oxidation processes for water decontamination has attracted accumulating attention worldwide. However, rather limited knowledge is currently available regarding their roles in activating periodate (PI), an emerging oxidant with versatile environmental applications. This study firstly delineated that Ru-supported Co₃O₄ (Ru/Co₃O₄), a typical Ru-based nanomaterial, can efficiently accomplish PI activation to eliminate multiple organic micropollutants and inactivate different pathogenic bacteria. Almost all eight micropollutants can be completely removed within 2 min of Ru/Co₃O₄-PI oxidation except sulfamethoxazole (SMX), which was degraded ∼70 % at 2 min with 100 % mineralization after 10 min. The excellent catalytic performance was independent of PI dosages, initial pH, and coexisting water constituents, demonstrating its prominent capability as a selective oxidation strategy. Diverse lines of evidence indicated the dominant role of single oxygen in the Ru/Co₃O₄-PI system, which triggered the generation of five transformation products of SMX with reduced environmental risks. Concurrently, PI was stoichiometrically converted to the eco-friendly IO₃^-. Additionally, Ru/Co₃O₄-PI system achieved 6-log inactivation of different pathogenic bacteria within 1 min, implying the feasibility of rapid water disinfection. Overall, this work demonstrated the excellent promise of Ru-based composites in PI activation for highly efficient and selective water decontamination.

Mechanism analysis of efficient degradation of carbamazepine by chalcopyrite-activated persulfate

In this study, natural chalcopyrite (NCP) was used to activate peroxymonosulfate (PMS) to degrade carbamazepine (CBZ) oxidatively. Before and after the NCP reaction, the physical and chemical properties were characterized by SEM-EDS, XRD, XPS, XRF, and VSM. The effects of the amount of NCP and PMS, the initial pH value, and the reaction temperature on the catalytic performance of NCP were systematically studied. The research results show that the degradation efficiency of the NCP/PMS system for CBZ can reach 82.34% under the optimal reaction conditions, and the degradation process follows a pseudo-second-order kinetic model. The results of the radical quenching experiment and EPR analysis show that the active species in the system are OH·, SO₄^-·, and ¹O², of which SO₄^-· is the main active species. In addition, this study shows that the NCP/PMS system can degrade CBZ with high efficiency of 90.73% only with the assistance of 0.15 g/L Fe⁰. This study determined the optimal reaction conditions for natural chalcopyrite to activate PMS to degrade CBZ and clarified the activation mechanism, which broadened the application of natural ores in the field of water treatment.

Synthesis, Biological Evaluation and Docking Study of Mono- and Di-sulfonamide Derivatives as Antioxidant Agents and Acetylcholinesterase Inhibitors

Mono(M1-M5)- and di(DM1-DM5)-sulfonamide derivatives were synthesized by the reaction of 4-iodobenzenesulfonyl chloride compound and aniline derivatives in basic medium. The structures of the synthesized sulfonamide derivatives were characterized by spectroscopic and X-ray diffraction methods. All compounds were screened for their acetylcholinesterase (AChE) inhibitory studies and 2,2-diphenyl-1-picrylhydrazil (DPPH) radical scavenging activities. Among the compounds tested, compound M1 showed the best activity against both AChE (IC 50 = 42.09 µg/mL for AChE) and DPPH (IC 50 = 9.94 µg/mL for DPPH). Binding energies and modes were determined by placing all compounds in the active site of AChE. Molecular docking studies were performed in order to investigate binding interaction between the synthesized compounds and AChE. The most active M1 compound showed its low CDOCKER energy (-65,834 kcal/mol).

The physical and optical investigations of the tannic acid functionalised Cu-based oxide nanostructures

The need for a mild, low-cost, green environment that is able to produce exotic properties of output nanostructures is appealing nowadays. Employing these requirements, the copper (Cu)-based oxide nanostructures have been successfully synthesised via one-pot reaction using biocompatible natural polyphenol, tannic acid (TA) as both the reducing agent and stabiliser at 60, 70 and 80 °C. The structural and optical studies disclosed the effect of TA on the surface morphology, phase purity, elemental composition, optical microstrain and optical intrinsic energy of this mixed Cu₂O and CuO nanostructures. The optically based method describes the comparative details of the multi-band gap in the presence of more than one element with overlapping spectra from the first-derivative absorbance curve [Formula: see text] and the exponential absorbance of Urbach tail energy [Formula: see text] towards the conventional Tauc bandgap. The [Formula: see text] demonstrates that the pronounced effect of TA that Cu₂O and CuO nanostructures creates much sensitive first-derivative bandgap output compared to the Tauc bandgap. The results also show that the [Formula: see text] reduced as the temperature reaches 70 °C and then experienced sudden increase at 80 °C. The change in the pattern is parallel to the trend observed in the Williamson-Hall microstrain and is evident from the variations of the mean crystallite size [Formula: see text] which is also a cause response to the change in temperature or pH. Therefore, the current work has elucidated that the structural and optical correlations on the as-synthesised Cu₂O and CuO nanostructures in the presence of TA were the combined reaction of pH change and the ligand complexation reactions. The acquired results suggest a more comprehensive range of studies to further understand the extent relationship between the physical and optical properties of TA functionalised Cu-based oxide nanostructures.

Degradation of methyl orange by pyrite activated persulfate oxidation: mechanism, pathway and influences of water substrates

Degradation mechanism of methyl orange (MO), a typical azo dye, with pyrite (FeS₂) activated persulfate (PS) was explored. The results showed that when the initial concentration of MO was 0.1 mM, FeS₂ was 1.6 g/L and PS was 1.0 mM, the removal rate of MO could reach 92.9% in 150 min, and the removal rate of total organic carbon could reach 14.1%. In addition, both pH ≤ 2 and pH ≥ 10 could have an inhibitory effect in the FeS₂/PS system. Furthermore, Cl^- and low concentrations of HCO^-₃ had little effect on the degradation of MO with FeS₂/PS. However, H₂PO^-₄ and high concentrations of HCO^-₃ could inhibit the degradation of MO in the system. Besides, MO in river water and tap water were not degraded in FeS₂/PS system, but acidification (pH = 4) would greatly promote the degradation. In addition, the removal rate of MO with FeS₂/PS could still reach about 90% after five cycles of FeS₂. Furthermore, the intermediates and possible degradation pathways were speculated by LC-MS, and the degradation mechanism of MO by FeS₂/PS was that the cycle of Fe(III)/Fe(II) could continuously activate persulfate to produce SO₄^•-. The results could provide technical support for azo dye degradation in the FeS₂/PS system.

Enhanced production of microalgae-originated photosensitizer by integrating photosynthetic electrons extraction and antibiotic induction towards photocatalytic degradation of antibiotic: A novel complementary treatment process for antibiotic removal from effluent of conventional biological wastewater treatment

Antibiotic residues in effluents from bio-treated wastewaters are mainly responsible for the spread of antibiotic resistance genes in the environment. Conventional physicochemical treatments are thought to be unsustainable due to high energy consumption, large consumption of chemicals and environmental unfriendly processing step. In this study, a novel approach by integrating photosynthetic electrons extraction from microalgae with antibiotic induction was used to enhance the production of microalgae-originated photosensitizer for photolytic removal of antibiotic residues in effluents from conventional bio-treated wastewaters. Results showed that the accumulation of photoactive substances in extracellular polymeric substance (EPS) of chlorella vulgaris was positively related to the amounts of photosynthetic electrons extracted by the electrode which is a potential-dependent process and can be further enhanced by tetracycline (TC) induction. The protein and humic acid which are considered two main photoactive substances in EPS produced at 0.6 V accumulated to a high level of 320 and 24 μg/cm³ and were further increased to 380 and 48 μg/cm³ when TC was added which were 4.7 and 6.4-folds higher than that produced at potential free in the absence of TC. The EPS produced at 0.6 and 0.8 V led to 1.34 and 1.53-fold acceleration in photosensitized degradation of TC compared to that of EPS free in secondary effluent of municipal wastewater treatment plant. The complex heterocyclic ring structure of TC was broken down into simple monocyclic aromatic compounds, indicating a marked reduction in biotoxicity and recalcitrance. The hydroxyl radical played a main role for the photolysis of TC followed by singlet oxygen. This technology provides a new alternative to conventional physicochemical treatment as complementary treatment processes for biological wastewater treatment in terms of antibiotics removal.

Formation of stable imine intermediates in the coexistence of sulfamethoxazole and humic acid by electrochemical oxidation

The electrochemical degradation performance of sulfamethoxazole (SMX) was studied in the presence of humic acid (HA) by using a Ti/Ti₄O₇/β-PbO₂ anode. The electrochemical degradation efficiency of SMX decreased from 93.4% to 45.8% in 50 min after the addition of 25 mg L^-1 HA. The pseudo-first-order kinetic rate constant decreased by 71.4%, and the E_EO value increased from 63.8 Wh L^-1 to 90.9 Wh L^-1. HA and its degradation intermediates could compete for free radicals, especially for ·OH, with SMX. The analytical results obtained using UPLC-ESI-Q-TOF-MS showed that 18 degradation intermediates were identified in the coexistence of SMX and HA. Four imine intermediates were formed through the reactions between the aniline moieties of SMX and quinone groups in the HA structure through covalent bonds. Furthermore, the relative abundances of the intermediates demonstrated that the imine intermediates were complex and stable during electrochemical degradation.

Abiotic transformation and ecotoxicity change of sulfonamide antibiotics in environmental and water treatment processes: A critical review

Sulfonamides (SAs) are among the most widely used antibiotics to treat bacterial infections for humans and animals. They are also used in livestock agriculture to improve growth and feed efficiency in many countries. Recent years, there is a growing concern about the environmental fate and treatment technologies of SAs, in order to eliminate their potential impact on the ecosystem and human health. Additionally, SAs are frequently used as model compounds to evaluate the performance of newly developed advanced water treatment processes. Hence, understanding the chemical reaction features of SAs can provide valuable information for further technological development. In this review, the reaction kinetics, abiotic transformations and corresponding ecotoxicity changes of SAs in natural environments and water treatment processes were comprehensively analyzed to draw critical suggestion and new insights. The •OH-based AOP is proposed as an effective method for the elimination of SAs toxicity, although it is susceptible to water constituent due to low selectivity. The application of biochar or metal-based oxidants in AOPs is becoming a future trend for SA treatment. Overall, this review would provide useful information for the development of advanced water treatment technologies and the control of ecological risks related to SAs.

Sulfamethoxazole degradation by UV-Fe3+ activated hydrogen sulfite

Exploration of novel advanced oxidation systems with high efficiency toward radical generation is of significant importance due to the extensive and versatile application of reactive species in the wastewater treatment. Herein we report a simple UV-catalytic homogeneous advanced oxidation system (UV/Fe³⁺/hydrogen sulfite (BS)), which is capable of generating abundant radicals (e.g., SO₃^-, SO₄^-, SO₅^- and HO) in the aqueous environment. Sulfamethoxazole (SMX) degradation using this system was tested. Results indicated that SMX could be degraded effectively by UV/Fe³⁺/BS and sulfate radical (SO₄^-) and hydroxyl radical (HO^•) were verified to be presented in this system and be contributive to SMX removal. The acidic pH (4.0) and a low BS/Fe³⁺ ratio (10:1) were suitable for SMX degradation. The presence of fulvic acid (FA) and HCO₃^- strongly inhibited the degradation of SMX, but obvious acceleration was observed in the presence of NO₃^- due to its contribution on additional radical generation by photosensitization. Based on the detected transformation products through LC-MS analysis, the degradation pathway of SMX by UV/Fe³⁺/BS was proposed including hydroxylation and bond cleavage.

A novel fluorescent probe based on N, B, F co-doped carbon dots for highly selective and sensitive determination of sulfathiazole

The widespread occurrence of sulfathiazole (STZ) in the environment has raised concerns regarding the potential risks to ecosystem and human health. Thus, there is a need to develop facile and efficient methods for monitoring STZ. In this study, a novel fluorescent probe, based on N, B, F co-doped carbon dots (N, B, F-CDs), was developed for the highly sensitive and selective determination of STZ. The fluorescent N, B, F-CDs were prepared via a one-step hydrothermal method using malonate and 1-allyl-3-vinylimidazolium tetrafluoroborate ionic liquid as precursors. The obtained N, B, F-CDs exhibited excellent fluorescence response toward STZ due to the inner filter effect (IFE), which caused the fluorescence to be quenched. The fluorescent probe allowed the STZ concentration to be accurately determined with a low detection limit of 5.5 ng mL^-1 in two wide linear ranges of 0.008-10 μg mL^-1 and 10-45 μg mL^-1. The practicability of the fluorescent probe was further validated in river water, soil, milk, and egg samples, and the satisfactory spiked recoveries of STZ ranged from 96.1 to 101.6%. The proposed fluorescent probe based on N, B, F-CDs can be easily prepared and possess high selectivity and sensitivity, thereby displaying its tremendous potential for the identification and determination of STZ in the environment.

Direct oxidation of antibiotic trimethoprim by unactivated peroxymonosulfate via a nonradical transformation mechanism

Application of activated peroxymonosulfate (PMS) to generate sulfate radical or hydroxyl radical is a promising strategy for wastewater treatment, while our knowledge on the background reaction, namely, the direct interaction between PMS and target contaminants is quite limited. In this contribution, the degradation kinetics, stoichiometry, products and mechanism of the reaction between unactivated PMS and trimethoprim (TMP), one of the most commonly detected micro-pollutants in the aquatic system were investigated systematically. The results indicated that TMP was susceptible to degradation by direct PMS oxidation via a non-radical process. By recording the decay of two reactants simultaneously, the stoichiometric ratio between PMS and TMP was estimated to be approximately 1. Higher PMS levels exhibited a promotion effect on PMS decay. And the degradation was pH-dependent, basic conditions were favorable for TMP degradation, which could be well modeled based on the species-specific reactions. The two amine groups on the pyrimidine ring were identified as the reactive sites. After direct attacks by PMS, they would be oxidized to form hydroxylamine-products, namely, N⁸-OH-TMP and N⁹-OH-TMP. These two hydroxylamine-products were quite stable and resistant to further oxidation by PMS, preventing the formation of more toxic nitroso- and nitro-products. The new findings in the present work would provide beneficial information on the strategy choice for the elimination of specific pollutants, like TMP, as PMS also exhibits relatively high reactivity towards them.

MoS2-assisted Fe2+/peroxymonosulfate oxidation for the abatement of phenacetin: efficiency, mechanisms and toxicity evaluation

In this study, molybdenum disulfide (MoS₂) was chosen as a co-catalyst to enhance the removal efficiency of phenacetin (PNT) in water by a ferrous ion-activated peroxymonosulfate (Fe²⁺/PMS) process. Operating parameters, such as the initial solution pH and chemical dose on PNT degradation efficiency were investigated and optimized. Under an initial pH of 3, an Fe²⁺ dose of 25 μM, a PMS dose of 125 μM and a MoS₂ dose of 0.1 g L⁻¹, the degradation efficiency of PNT reached 94.3%, within 15 min. The presence of common water constituents including Cl⁻, HCO₃⁻, SO₄²⁻ and natural organic matter (NOM) will inhibit degradation of PNT in the MoS₂/Fe²⁺/PMS system. Radical quenching tests combined with electron paramagnetic resonance (EPR) results indicated that in addition to free radical species (˙OH, SO₄˙⁻ and O₂˙⁻), nonradical reactive species (¹O₂) were also crucial for PNT degradation. The variations in the composition and crystalline structure of the MoS₂ before and after the reaction were characterized by XPS and XRD. Further, the degradation pathways of PNT were proposed according to the combined results of LC/TOF/MS and DFT calculations, and primarily included hydroxylation of the aromatic ring, cleavage of the C–N bond of the acetyl-amino group, and cleavage of the C–O bond of the ethoxy group. Finally, toxicity assessment of PNT and its products was predicted using the ECOSAR program.

Performance, mechanisms and toxicity evaluation of PNT degradation by the MoS₂/Fe²⁺/PMS system were investigated.

Removal of sulfamethizole from aqueous solution using advanced oxidation processes: effects of pH and salinity

This study investigates the removal of sulfamethizole (SFZ) in ozone (O₃), O₃/Na₂S₂O₈ (sodium persulfate), UV/Na₂S₂O₈, UV/O₃, and UV/O₃/Na₂S₂O₈ systems. The effects of pH and salinity on SFZ mineralization were evaluated. The mineralization of SFZ followed pseudo-first-order kinetics. At pH 5, the rate constants of SFZ mineralization in O₃, O₃/Na₂S₂O₈, UV/Na₂S₂O₈, UV/O₃, and UV/O₃/Na₂S₂O₈ systems were 0.576, 0.924, 0.702, 1.26, and 5.21 h^-1, respectively. The SFZ mineralization rate followed the order pH 5 > pH 7 > pH 9 in all tested advanced oxidation processes. Salinity increased the rate of SFZ mineralization in O₃ and O₃/Na₂S₂O₈ systems and decelerated it in UV/Na₂S₂O₈, UV/O₃, and UV/O₃/Na₂S₂O₈ systems. UV/O₃/Na₂S₂O₈ was the best system for mineralizing SFZ, and sulfate radicals were the predominant species in UV/O₃/Na₂S₂O₈.

A Review Study on Sulfate-Radical-Based Advanced Oxidation Processes for Domestic/Industrial Wastewater Treatment: Degradation, Efficiency, and Mechanism

High levels of toxic organic pollutants commonly detected during domestic/industrial wastewater treatment have been attracting research attention globally because they seriously threaten human health. Sulfate-radical-based advanced oxidation processes (SR-AOPs) have been successfully used in wastewater treatment, such as that containing antibiotics, pesticides, and persistent organic pollutants, for refractory contaminant degradation. This review summarizes activation methods, including physical, chemical, and other coupling approaches, for efficient generation of sulfate radicals and evaluates their applications and economic feasibility. The degradation behavior as well as the efficiency of the generated sulfate radicals of typical domestic and industrial wastewater treatment is investigated. The categories and characteristics of the intermediates are also evaluated. The role of sulfate radicals, their kinetic characteristics, and possible mechanisms for organic elimination are assessed. In the last section, current difficulties and future perspectives of SR-AOPs for wastewater treatment are summarized.

Removal of sulfamethoxazole, sulfadiazine, and sulfamethazine by UV radiation and HO• and SO4•- radicals using a response surface model and DFT calculations

In this work, the degradation of sulfamethazine (SMT), sulfadiazine (SMD), and sulfamethoxazole (SMX) by using UV light, UV/H₂O₂, and UV/S₂O₈^-2 was analyzed. Direct photolysis was studied by varying the lamp power and the solution pH. DFT calculations were carried out to corroborate the efficiency of the degradation as a function of the solution pH. The variation of the apparent rate constant, k_ap, was determined in the indirect photolysis by employing an experimental Box-Behnken-type response surface design. The results evidenced that SMX can be efficiently degraded by applying UV radiation independent of the operating conditions. Nevertheless, the quantum yields for SMT and SMD were close to zero, indicating a low energy efficiency for their photochemical transformation. The effect of the solution pH showed that the photodegradation of sulfonamides depends both on the amount of radiation absorbed as the electronic density. Calculations based on density functional theory and supported by the quantum theory of atoms in molecules allowed to describe fragmentation patterns in the systems under study, proving the lability of S₁₄-C₂, N₁₇-C₁₈, and N₂₂-O₂₂ bonds, for SMT, SMD, and SMX, respectively. From response surface methodology, four statistically reliable equations were obtained to determine the k_ap value as a function of the system operating conditions. Finally, SO₄^•- radicals proved to have a higher reactivity to degrade SMT and SMD compared with HO^• radicals regardless of the operating conditions of the system.

The efficient degradation of sulfisoxazole by singlet oxygen (1O2) derived from activated peroxymonosulfate (PMS) with Co3O4-SnO2/RSBC

Co₃O₄-SnO₂/rice straw biochar (RSBC) was prepared for the first time via calcining oxalate precipitation precursor dispersed on the surface of RSBC and used as a catalyst for activating PMS to degrade sulfisoxazole (SIZ). The results demonstrated that Co₃O₄-SnO₂/RSBC possessed much better catalytic performance than Co₃O₄, Co₃O₄-SnO₂, Co₃O₄/RSBC, and SnO₂/RSBC, which is ascribed to the synergy of Co₃O₄, SnO₂ and RSBC. Approximately 98% of SIZ (50 mg/L) was decomposed by PMS (1 mmol/L) activated with Co₃O₄-SnO₂/RSBC (0.1 g/L) within 5 min. The optimal degradation efficiency of SIZ was realized at the initial pH 9. Co₃O₄-SnO₂/RSBC also displayed remarkable stability and reusability, and the degradation rate of SIZ maintained over 90% even after the fifth recycle run. The electron paramagnetic resonance (EPR) technique and quenching experiments proved singlet oxygen (¹O₂) to be the main reactive oxygen species (ROS) responsible for the SIZ decomposition in the Co₃O₄-SnO₂/RSBC/PMS system. On the basis of the characterization analysis, the identification of the ROS and the SIZ degradation products, the possible mechanism and pathways of the SIZ degradation by a combination of PMS and Co₃O₄-SnO₂/RSBC were further proposed. This study provides not only a new insight into non-radical mechanism for the heterogeneous activating PMS over Co₃O₄-SnO₂/RSBC to degrade organic pollutants but also an eco-friendly synthetic route for exploring novel and efficient catalysts.

Degradation of sulfathiazole by electro-Fenton using a nitrogen-doped cathode and a BDD anode: Insight into the H2O2 generation and radical oxidation

In this work, nitrogen-doped cathodes for high H₂O₂ production and sulfathiazole (STZ) degradation in electro-Fenton (EF) systems were prepared by the carbonization of three carbon/nitrogen-enriched precursors. Among the cathodes elaborated from different precursors, the one using 1h-1,2,4-triazole-3,5-diamine as the precursor showed the best oxygen reduction reaction (ORR) ability with the normalized H₂O₂ accumulation of 9.49 ± 0.03 mg L^-1 h^-1 cm^-2 compared to the other two N-containing cathodes. The enhanced H₂O₂ accumulation was attributed to the high electroactive surface area and pyrrolic N (60.45%) content. Regarding reactive oxygen species in the absence of Fe²⁺, aside from the H₂O₂, O₂^-and ¹O₂ were identified using spectroscopic techniques and chemical probes. As a result, a degradation and mineralization efficiency of 98.25 ± 0.14% and 70.57 ± 0.27% of STZ were attained in the 180-min treatment, mainly coming from the homogeneous OH from classical Fenton, anodic OH on BDD anode and direct/indirect oxidation of O₂^-and ¹O₂. In addition, the plausible degradation pathway of STZ was proposed based on the density functional theory (DFT) combined with experimental data derived by ultra-performance liquid chromatography tandem mass spectrometry (UPLC-MS/MS). The frontier orbital theory and Fukui function theoretically suggested the vulnerable sites of STZ for different active species including OH, O₂^- and ¹O₂. This study provides a new strategy for improving the ORR process and analyzing the generation and conversion of reactive oxygen species in the EF process.

Enhanced adsorption performance and regeneration of magnetic Fe3O4 nanoparticles assisted extracellular polymeric substances in sulfonamide-contaminated water

It is still unclear about the superiority of the nanoscale Fe₃O₄-assisted extracellular polymeric substances (EPS) compared to traditional EPS and its application feasibility in sulfonamide-contaminated aqueous system. This study reported eco-friendly and reusable EPS/Fe₃O₄ was applied in the sulfonamide-contaminated water treatment, including sulfamethoxazole (SMX), sulfamerazine (SM1), sulfamethazine (SM2) and sulfadiazine (SDZ), respectively. EPS/Fe₃O₄ exhibited the adsorption performance of 77.93%, 74.13%, 65.62%, and 56.64% for SMX, SM1, SM2 and SDZ, respectively, increased by 7.93%, 19.02%, 13.78% and 9.93% compared to traditional EPS. The initial pH value tuned adsorption performance via varying existing species of each sulfonamides. The adsorption process could be well fitted by Freundlich and pseudo-second-order kinetics models. Moreover, the multiple evidences from SEM, FTIR, zeta potential and XRD explained the adsorption mechanisms (i.e., chemisorption, ion exchange, hydroxyl group and hydrophobicity). Desorption and recycle adsorption experiments demonstrated the well regeneration ability of EPS/Fe₃O₄ as biosorbent (67.12% adsorption performance for SMX after five adsorption-desorption cycles), suggesting EPS/Fe₃O₄ was considered as a superior choice for sulfonamide-contaminated water treatment compared to the unrecyclable EPS.

Enhanced Activation of Persulfate by Co-Doped Bismuth Ferrite Nanocomposites for Degradation of Levofloxacin Under Visible Light Irradiation

In this study, magnetic visible light driven photocatalysts (bismuth ferrite, Bi₂Fe₄O₉, BFO and Co-doped bismuth ferrite, Co-BFO) were successfully prepared by the facile hydrothermal method. The catalyst was used in the application of heterogeneous persulfate (PS) system under visible LED light irradiation for the degradation of levofloxacin (LFX), proving to be an excellent photocatalyst when evaluated by various characterization methods. The effect of Co-doping in the BFO structure was investigated that the decrease of band gap width and the generated photoelectrons and holes would effectively reduce the recombination of photogenerated electron-hole pairs, leading to the enhancement photocatalytic activity. The results demonstrated that Co-BFO catalyst had a high photodegradation efficiency over a wide pH range of 3.0-9.0 and the Co-BFO-2 composite displayed the optimal catalytic performance. It was found that the degradation rate of LFX by Co-BFO-2 catalyst was 3.52 times higher than that of pure BFO catalyst under visible light condition. The free radical trapping experiments and EPR tests demonstrated that superoxide, photogenerated holes and sulfate radicals were the main active species in the photocatalytic degradation of LFX. And a possible photocatalytic degradation mechanism of LFX was proposed in the Vis/Co-BFO/PS process. These findings provided new insight of the mechanism of heterogeneous activation of persulfate by Co-BFO under visible light irradiation.