New insights into transformation pathways of a mixture of cytostatic drugs using Polyester-TiO2 films: Identification of intermediates and toxicity assessment

Suspect screening of the potential persistent and mobile organic compound (PMOC), dioctyl sulfosuccinate sodium (DOSS): Degradability, transformation and toxicity assessment

Dioctyl sulfosuccinate sodium (DOSS), a potential Persistent, Mobile, Organic Compound (PMOC), poses a significant hazard to drinking water quality due to its ability to disperse throughout the water cycle. This study focuses on DOSS and its transformation products (TPs), which remain underexplored regarding their PM properties and potential risks to water safety. The phototransformation of DOSS was investigated using advanced oxidation processes (AOPs) and solar-simulated experiments. A novel suspect-screening method was applied, combining literature data with identified photo-TPs to enhance a high-resolution mass spectrometry (HRMS) database for DOSS and its TPs. A total of 34 TPs were identified, 33 of which were newly reported. Hydroxylation, oxidation, and dealkylation were identified as key transformation processes. DOSS and its TPs were monitored across various environmental compartments, including wastewater, leachates, surface water, and groundwater. The average DOSS concentration in groundwater was 183 ng/L. Toxicity assessments, using in vitro and in silico methods, revealed concerning toxicity levels. Concluding, DOSS should be considered a potential PMOC with a higher likelihood of occurrence in environmental matrices than previously recognized.

Advanced oxidation coupled with LC-HRMS: Elucidating transformation products of linezolid, discovering in wastewaters and conducting in silico toxicity assessments

Antibiotics are prevalent in wastewater treatment plants and are subsequently released into aquatic environments, threatening aquatic organisms and compromising drinking water quality. Consequently, investigating their environmental fate and developing efficient removal processes is crucial. The degradation and fate of the antibiotic drug linezolid were investigated, focusing on the formation of transformation products (TPs). Various advanced oxidation processes, such as UV/S2O82-, UV/TiO2, Fe2+/S2O82- and UV/Fe2+/S2O82-, proved effective in eliminating linezolid within minutes. Liquid chromatography coupled to high-resolution mass spectrometry was employed to elucidate the photo-generated TPs and propose tentative transformation pathways. Overall, 28 TPs were identified, with 17 elucidated for the first time herein. The fluorophenyl and morpholine rings of the linezolid molecule were the main sites of attack, leading to two primary transformation routes: defluorination and hydroxylation. The predominant route varied with the treatment applied. In silico toxicity assessment indicated alarming toxicity for two TPs but decreased toxicity for most TPs compared to linezolid, suggesting the detoxification role of the treatments. However, concerning predictions emerged for the carcinogenicity, mutagenicity and biodegradability of linezolid and its TPs. Finally, a suspect screening analysis investigated the presence of TPs in wastewaters, revealing the occurrence of three TPs at notable levels, primarily in effluents.

Recent advances and future trends in metal oxide photocatalysts for removal of pharmaceutical pollutants from wastewater: a comprehensive review

The rapid and widespread increase in pharmaceutical micropollutants (PMPs) poses a significant and immediate threat to ecosystems and human health globally. With the demand for clean water becoming increasingly critical, particularly amid escalating global water scarcity challenges, there is an urgent need for innovative approaches. Among the potential solutions, metal oxide photocatalysts such as titanium dioxide-based (TiB) and zinc oxide-based (ZnB) have garnered attention due to their cost-effectiveness, efficient photodegradation capabilities, and inherent stability. This comprehensive review explores recent advancements in the application of TiB and ZnB for the removal of PMPs from wastewater. It examines the multifaceted impacts of PMPs on environmental and public health, evaluates various techniques for their removal, and assesses design strategies aimed at maximizing the photocatalytic efficiency of TiB and ZnB. The mechanisms responsible for the photocatalytic degradation of pharmaceutical micropollutants using TiB and ZnB photocatalysts are comprehensively detailed. Finally, the review outlines the prospects and challenges associated with the use of TiB and ZnB photocatalysts for the removal of PMPs from wastewater. It emphasizes their potential to effectively mitigate PMP contaminants and make substantial contributions to sustainable water management practices in the face of escalating environmental and public health concerns.

Degradation of cytostatics methotrexate and cytarabine through physico-chemical and advanced oxidative processes: influence of pH and combined processes on the treatment efficiency

Environmental release of wastewater that contains cytostatic drugs can cause genotoxic impact, since these drugs act directly on the genetic material of aquatic organisms. Thus, the aim of this study was to evaluate the removal of the cytostatic drugs cytarabine (CTR) and methotrexate (MTX) using different physico-chemical methods individually (i.e. US, O3, H2O2 and UV) and combined (i.e. O3/US, US/H2O2, O3/H2O2 and O3/US/H2O2) under different pH conditions (4, 7 and 10). In the degradation tests, the efficiency of the methods applied was found to be dependent on the pH of the solution, with the degradation of CTR being better at pH 4 and MTX at pH 7 and pH 10. The US, H2O2 and US + H2O2 methods were the least efficient in degrading CTR and MTX under the pH conditions tested. The highest MTX degradation rate after 16 min of treatment at pH 7 was achieved by the O3 + H2O2 method (97.05% - C/C0 = 0.0295). For CTR, the highest degradation rate after 16 min of treatment was achieved by the O3 process (99.70% - C/C0 =  0.0030) at pH 4. In conclusion, most of the treatment methods tested for the degradation of CTR and MTX are effective. Notably, ozonolysis is an efficient process applied alone. Also, in combination with other methods (US + O3, O3 + H2O2 and O3 + H2O2 + US) it increases the degradation performance, showing a rapid removal rate of 70-94% in less than 4 min of treatment.

Assessment of degradability and endothelialization of modified poly L-lactic acid (PLLA) atrial septal defect (ASD) occluders over time in vivo

OBJECTIVE

To evaluate the fiber-degradation and endothelialization of a modified poly L-lactic acid (PLLA) atrial septal defect (ASD) occluder for a long time in vivo.

METHODS

A total of 57 New Zealand rabbits were selected to establish the vasculature implantation model, which would be used to characterize the mechanical properties and pathological reaction of PLLA filaments (a raw polymer of ASD occluder). In total, 27 Experimental piglets were used to create the ASD model for the catheter implantation of PLLA ASD occluders. Then, X-ray imaging, transthoracic echocardiography, histopathology, and scanning electron microscope (SEM) were performed in the experimental animals at 3, 6, 12, and 24 months after implantation.

RESULTS

In the rabbit models, the fibrocystic grade was 0 and the inflammatory response was grade 2 at 6 months after vasculature implantation of the PLLA filaments. The mass loss of PLLA filaments increased appreciably with the increasing duration of implantation, but their mechanical strength was decreased without broken. In the porcine models, the cardiac gross anatomy showed that all PLLA ASD occluders were stable in the interatrial septum without any vegetation or thrombus formation. At 24 months, the occluders had been embedded into endogenous host tissue nearly. Pathological observations suggested that the occluders degraded gradually without complications at different periods. SEM showed that the occluders were endothelialized completely and essentially became an integral part of the body over time.

CONCLUSION

In the animal model, the modified PLLA ASD occluders exhibited good degradability and endothelialization in this long-term follow-up study.

TiO2 based Photocatalysis membranes: An efficient strategy for pharmaceutical mineralization

Among the various emerging contaminants, pharmaceuticals (PhACs) seem to have adverse effects on the quality of water. Even the smallest concentration of PhACs in ground water and drinking water is harmful to humans and aquatic species. Among all the deaths reported due to COVID-19, the mortality rate was higher for those patients who consumed antibiotics. Consequently, PhAC in water is a serious concern and their removal needs immediate attention. This study has focused on the PhACs' degradation by collaborating photocatalysis with membrane filtration. TiO₂-based photocatalytic membrane is an innovative strategy which demonstrates mineralization of PhACs as a safer option. To highlight the same, an emphasis on the preparation and reinforcing properties of TiO₂-based nanomembranes has been elaborated in this review. Further, mineralization of antibiotics or cytostatic compounds and their degradation mechanisms is also highlighted using TiO₂ assisted membrane photocatalysis. Experimental reactor configurations have been discussed for commercial implementation of photoreactors for PhAC degradation anchored photocatalytic nanomembranes. Challenges and future perspectives are emphasized in order to design a nanomembrane based prototype in future for wastewater management.

Challenges of TiO2 heterogeneous photocatalysis on cytostatic compounds degradation: state of the art

The following work provides a perspective on the degradation of cytostatic pollutants through TiO₂ heterogeneous photocatalysis. Cytostatic drugs are emerging pollutants used for cancer treatment found in hospital and domestic wastewater. Small amounts of cytostatic pollutants may pose severe health problems in human beings, animals, and plants after prolonged contact. This research presents a general review of some water treatment methods, such as aerobic activated sludge, enzymatic degradation, nanofiltration and chlorination, that have been used for the degradation or elimination of cytostatic drugs in wastewater. In recent years, photocatalysis has become important to solve this problem; these advanced oxidation process uses pure and modified TiO₂ to degrade cytostatic contaminants and convert them into non-harmful substances or to eliminate them completely. This work contains a comprehensive review of the heterogeneous photocatalysis process and mechanism, and its application on the removal of cytostatic pollutants. Even if research on the topic is still scarce, this literature review provides interesting highlights on the scope of the research field, and the path such research could follow.

Overarching issues on relevant pesticide transformation products in the aquatic environment: A review

The intensification of agricultural production during the last decades has forced the rapid increase in the use of pesticides that finally end up in the aquatic environment. Albeit well-documented, pesticides continue to raise researchers' attention, because of their potential adverse impacts on the environment and, inevitably, humans. Once entering the aquatic bodies, pesticides undergo biotic and abiotic processes, resulting in transformation products (TPs) that sometimes are even more toxic than the parent compounds. A substantial shift of the scientific interest in the TPs of pesticides has been observed since their environmental fate, occurrence and toxicity is still in its formative stage. In an ongoing effort to expand the existing knowledge on the topic, several interesting works have been performed mostly in European countries, such as France, Germany, Italy, Switzerland, Greece, and Spain that counts the highest number of relevant publications. Pesticide TPs have been also studied to a lesser extent in Asia, North and South America. To this end, the main objective of this review is to delineate the global occurrence, fate, toxicity as well as the analytical challenges related to pesticide TPs in surface, ground, and wastewaters, with the view to contribute to a better understanding of the environmental problems related with TPs formation. The concentration levels of the TPs, ranging from the low ng/L to high μg/L scale and distributed worldwide. Ultimately, an attempt to predict the acute and chronic toxicity of TPs has been carried out with the aid of an in-silico approach based on ECOSAR, revealing increased chronic toxicity for the majority of the identified TPs, despite the change they underwent, while a small portion of them presented serious acute toxicity values.

Key Points of Advanced Oxidation Processes (AOPs) for Wastewater, Organic Pollutants and Pharmaceutical Waste Treatment: A Mini Review

Advanced oxidation procedures (AOPs) refer to a variety of technical procedures that produce OH radicals to sufficiently oxidize wastewater, organic pollutant streams, and toxic effluents from industrial, hospital, pharmaceutical and municipal wastes. Through the implementation of such procedures, the (post) treatment of such waste effluents leads to products that are more susceptible to bioremediation, are less toxic and possess less pollutant load. The basic mechanism produces free OH radicals and other reactive species such as superoxide anions, hydrogen peroxide, etc. A basic classification of AOPs is presented in this short review, analyzing the processes of UV/H2O2, Fenton and photo-Fenton, ozone-based (O3) processes, photocatalysis and sonolysis from chemical and equipment points of view to clarify the nature of the reactive species in each AOP and their advantages. Finally, combined AOP implementations are favored through the literature as an efficient solution in addressing the issue of global environmental waste management.

Treatment-driven removal efficiency, product formation, and toxicity evolution of antineoplastic agents: Current status and implications for water safety assessment

Antineoplastic compounds, designed for chemotherapeutic anticancer therapy, have become emerging contaminants of global concern over the past decade due to their ubiquitous occurrence, environmental persistence, and multiple adverse effects on aquatic ecosystems. Increasing efforts have been devoted to developing efficient strategies for remediating water containing these micropollutants. In this study, the physicochemical properties, natural attenuation, and chemical reactivity with aqueous oxidizing species of five antineoplastic drugs with the highest environmental prevalence (i.e., tamoxifen, cyclophosphamide, ifosfamide, 5-fluorouracil, and methotrexate) were summarized. The removal performance, transformation products (TPs) of varying structures, overall reaction pathways, and toxicity evolution during different treatments were evaluated and discussed. Additionally, the biodegradability and multi-endpoint toxicity of each TP were predicted using in silico QSAR software. Depending on their distinct inherent structures, the reactivity of the antineoplastics with oxidizing species varied, with hydroxyl radicals exhibiting unparalleled merits in rapid oxidation. Complete elimination of these contaminants was observed during oxidative treatments, but with inadequate mineralization. Notably, the increase in toxicity within multiple processes was determined based on both experimental bioassays and theoretical predictions. This may be attributed to the adverse effects induced by the large number of identified and unknown TPs individually and in combination. Together with the environmental persistence and low biodegradability of most TPs, these results necessitate the application of efficient post-treatments in conjunction with a more thorough water safety evaluation (e.g., using high-throughput screening) of the mixtures of treated water and wastewater.

Cytostatic Drug 6-Mercaptopurine Degradation on Pilot Scale Reactors by Advanced Oxidation Processes: UV-C/H2O2 and UV-C/TiO2/H2O2 Kinetics

6-Mercaptopurine (6-MP) is a commonly used cytostatic agent, which represents a particular hazard for the environment because of its low biodegradability. In order to degrade 6-MP, four processes were applied: Photolysis (UV-C), photocatalysis (UV-C/TiO2), and their combination with H2O2, by adding 3 mM H2O2/L (UV-C/H2O2 and UV-C/TiO2/H2O2 processes). Each process was performed with variable initial pH (3.5, 7.0, and 9.5). Pilot scale reactors were used, using UV-C lamps as radiation source. Kinetic calculations for the first 20 min of reaction show that H2O2 addition is of great importance: in UV-C experiments, highest k was reached under pH 3.5, k = 0.0094 min−1, while under UV-C/H2O2, k = 0.1071 min−1 was reached under the same initial pH; similar behavior was observed for photocatalysis, as k values of 0.0335 and 0.1387 min−1 were calculated for UV-C/TiO2 and UV-C/TiO2/H2O2 processes, respectively, also under acidic conditions. Degradation percentages here reported for UV-C/H2O2 and UV-C/TiO2/H2O2 processes are above 90% for all tested pH values. Ecotoxicity analysis of samples taken at 60 min in the photolysis and photocatalysis processes, suggests that contaminant degradation by-products present higher toxicity than the original compound.

Innovative Polymeric Hybrid Nanocomposites for Application in Photocatalysis

The immobilization of inorganic nanomaterials on polymeric substrates has been drawing a lot of attention in recent years owing to the extraordinary properties of the as-obtained materials. The hybrid materials, indeed, combine the benefits of the plastic matter such as flexibility, low-cost, mechanical stability and high durability, with them deriving from their inorganic counterparts. In particular, if the inorganic fillers are nanostructured photocatalysts, the originated hybrid systems will be able to utilize the energy delivered by light, catalysing chemical reactions in a sustainable pathway. Most importantly, since the nanofillers can be ad-hoc anchored to the macromolecular structure, their release in the environment will be prevented, thus overcoming one of the main restrictions that impedes their applications on a large scale. In this review, several typologies of hybrid photocatalytic nanomaterials, obtained by using both organic and inorganic semiconductors and realized with different synthetic protocols, were reported and discussed. In the first part of the manuscript, nanocomposites realized by simply blending the TiO2 or ZnO nanomaterials in thermoplastic polymeric matrices are illustrated. Subsequently, the atomic layer deposition (ALD) technique is presented as an excellent method to formulate polymeric nanocomposites. Successively, some examples of polyporphyrins hybrid systems containing graphene, acting as photocatalysts under visible light irradiation, are discussed. Lastly, photocatalytic polymeric nanosponges, with extraordinary adsorption properties, are shown. All the described materials were deeply characterized and their photocatalytic abilities were evaluated by the degradation of several organic water pollutants such as dyes, phenol, pesticides, drugs, and personal care products. The antibacterial performance was also evaluated for selected systems. The relevance of the obtained results is widely overviewed, opening the route for the application of such multifunctional photocatalytic hybrid materials in wastewater remediation.

Exploring the phototransformation and assessing the in vitro and in silico toxicity of a mixture of pharmaceuticals susceptible to photolysis

The present study comprehensively investigates the phototransformation and ecotoxicity of a mixture of twelve pharmaceutically active compounds (PhACs) susceptible to photolysis. Namely, three antibiotics (ciprofloxacin, levofloxacin, moxifloxacin), three antidepressants (bupropion, duloxetine, olanzapine), three anti-inflammatory drugs (diclofenac, ketoprofen, nimesulide), two beta-blockers (propranolol, timolol) and the antihistamine ranitidine were treated under simulated solar irradiation in ultra-pure and river water. A total of 166 different transformation products (TPs) were identified by ultra-high performance liquid chromatography coupled with Orbitrap high resolution mass spectrometry (UHPLC-Orbitrap HRMS), revealing the formation of twelve novel TPs and forty-nine not previously described in photolytic studies. The kinetic profiles of the major TPs resulting from a series of chemical reactions involving hydroxylation, cleavage and oxidation, dehalogenation, decarboxylation, dealkylation and photo substitution have been investigated and the transformation pathways have been suggested. Additionally, an in vitro approach to the toxicity assessment of daphnids was contrasted with ecotoxicity data based on the Ecological Structure Activity Relationships (ECOSAR) software comprising the in silico tool to determine the adverse effects of the whole mixture of photolabile parent compounds and TPs. The results demonstrated that photolysis of the target mixture leads to a decrease of the observed toxicity.