Activated carbon coupled with advanced biological wastewater treatment: A review of the enhancement in micropollutant removal

Environmental behavior, risks, and management of antidepressants in the aquatic environment

Antidepressants are increasingly detected in aquatic environments due to their incomplete removal in wastewater treatment, raising significant concerns about their ecological impacts. This review focuses on the three most widely used classes of antidepressants-tricyclic antidepressants (TCAs), selective serotonin reuptake inhibitors (SSRIs), and serotonin-norepinephrine reuptake inhibitors (SNRIs). It systematically explores their physicochemical properties and how these properties influence their environmental fate, including sorption, mobility, and bioaccumulation in aquatic ecosystems. The sublethal effects of these antidepressants on aquatic organisms, particularly their impacts on behavior, reproduction, and development, are critically analyzed, highlighting potential threats to biodiversity and ecological stability. Key knowledge gaps are identified, including the long-term impacts of chronic low-dose exposure, the role of bioactive metabolites, and the combined toxicity of antidepressants with other contaminants. The review underscores the importance of advanced wastewater treatment technologies, environmentally mindful prescribing practices, and public awareness campaigns as essential measures to mitigate these risks. By addressing these challenges, this study aims to inform future research and guide sustainable environmental management strategies.

Fast and Efficient Sensing of Drugs in Water Using Self-Assembling D-Glucamine-Functionalized Naphthalenediimide and 1,8-Naphthalimide Fluorophores

Fast and sensitive quantification of drugs as emerging pollutants in water bodies is a pressing need in contemporary society, to prevent serious environmental concerns that could negatively impact on human health. This explains the surge of interest in this field, and the need to identify highly selective sensing systems. Addressing this issue, in this work we synthesized two D-glucamine functionalized fluorophores bearing self-assembling cores, as 1,8-naphthalimide and naphthalene diimide. We studied their self-assembly in water solution, and characterized the aggregated formed by determining their stability constant, their morphology and size by scanning electron microscopy, resonance light scattering and dynamic light scattering, as well their solid-state emission ability. Then, we studied their sensing ability, in water, towards pharmaceutically active compounds such as ciprofloxacin, nalidixic acid, carbamazepine and diclofenac sodium salt, by fluorescence investigation. Data collected show that the self-assembling ability is significantly affected by the fluorophore structure, which in turn also determines sensing ability. In particular, the naphtalene diimide-based probe was the most sensitive, with LOD as low as 0.01 μM in the presence of nalidixic acid, which is in line and competitive with more complex sensing systems, recently reported in the literature.

Mitigating Membrane Fouling in Abattoir Wastewater Treatment: Integration of Pretreatment Step with Zwitterion Modified Graphene Oxide-Polyethersulfone Composite Membranes

Composite polyethersulfone (PES) membranes containing N-aminoethyl piperazine propane sulfonate (AEPPS)-modified graphene oxide (GO) were integrated with either of the two pretreatment processes (activated carbon (AC) adsorption or polyelectrolyte coagulation) to assess their effectiveness in mitigating membrane fouling during the treatment of abattoir wastewater. The AEPPS@GO-modified membranes, as compared to the pristine PES membranes, showed improved hydrophilicity, with water uptake increasing from 72 to 118%, surface porosity increasing from 2.34 to 27%, and pure water flux (PWF) increasing from 235 to 673 L.m-2h-1. The modified membranes presented improved antifouling properties, with the flux recovery ratio (FRR) increasing from 59.5 to 93.3%. This study compared the effectiveness of the two pretreatment processes, AC, coagulation, and the integrated system (coagulation/AC-UF membrane), in the removal of natural organic matter (NOM) and improvement of abattoir wastewater's pH, electrical conductivity, TDS, and turbidity. The integrated systems produced improved water quality in terms of pH, EC, TDS, turbidity, and organic content. The fluorescence excitation-emission matrix (FEEM) analysis exhibited almost no fluorescence peak post-treatment following organic loading removal. The quality of the water met the South African non-potable water reuse standards. The sole membrane treatment systems exhibited good fouling resistance without the pretreatment systems; however, integrating these systems can offer extended longer filtration periods, thereby assisting in cost aspects of the abattoir wastewater treatment system.

Comparative assessment of treatment technologies for minimizing reverse osmosis concentrate volume for industrial applications: A review

Desalination of seawater, brackish water, and reclaimed water is becoming increasingly prevalent worldwide to supplement and diversify fresh water supplies. However, particularly for industrial wastewater, the need for environment-friendly and economically viable alternatives for concentrate management is the major impediment to deploying large-scale desalination. This review covers various strategies and technologies for managing reverse osmosis concentrate (ROC) and also includes their disposal, treatment, and potential applications. Developing energy-efficient, economical, and ecologically sound ROC management systems is essential if desalination and wastewater treatment are being implemented for a sustainable water future, particularly for industrial wastewater. The limitations and benefits of various concentrate management strategies are examined in this review. Moreover, it explores the potential of innovative technologies in reducing concentrate volume, enhancing water recovery, eliminating organic pollutants, and extracting valuable resources. This review critically discusses concentrate management approaches and technologies, including disposal, treatment, and reuse, including new technologies for reducing concentrate volume, boosting water recovery, eliminating organic contaminants, recovering valuable commodities, and minimizing energy consumption.

Selection of pharmaceuticals of concern in reclaimed water for crop irrigation in the Mediterranean area

The reuse of reclaimed water in agriculture is being fostered in areas suffering from water scarcity. However, water pollutants can compromise food safety and pose a risk for the environment. This study aims to select the pharmaceutical compounds worth monitoring and investigating when reclaimed water is used for tomato and lettuce irrigation. A comprehensive study was first conducted to identify the pharmaceuticals frequently detected in secondary wastewater effluents in Catalonia (Northeast Spain). Priority pharmaceuticals were further selected based on their occurrence in secondary effluents, persistence (removal in conventional treatment), bioaccumulation potential, toxicity for aquatic organisms, and the risks they pose to the terrestrial environment and human health (through the consumption of crops). Out of the 47 preselected priority compounds, six could pose a risk to organisms living in soil irrigated with reclaimed water and seven could be potentially taken up by the crops. Nonetheless, no risk for human consumption was foreseen.

A thorough analysis of the occurrence, removal and environmental risks of organic micropollutants in a full-scale hybrid membrane bioreactor fed by hospital wastewater

The Urban Wastewater Treatment Directive recent draft issued last October 2022 pays attention to contaminants of emerging concern including organic micropollutants (OMPs) and requires the removal of some of them at large urban wastewater treatment plants (WWTPs) calling for their upgrading. Many investigations to date have reported the occurrence of a vast group of OMPs in the influent and many technologies have been tested for their removal at a lab- or pilot-scale. Moreover, it is well-known that hospital wastewater (HWW) contains specific OMPs at high concentration and therefore its management and treatment deserves attention. In this study, a 1-year investigation was carried out at a full-scale membrane bioreactor (MBR) treating mainly HWW. To promote the removal of OMPs, powdered activated carbon (PAC) was added to the bioreactor at 0.1 g/L and 0.2 g/L which resulted in the MBR operating as a hybrid MBR. Its performance was tested for 232 target and 90 non-target OMPs, analyzed by UHPLC-QTOF-MS using a direct injection method. A new methodology was defined to select the key compounds in order to evaluate the performance of the treatments. It was based on their frequency, occurrence, persistence to removal, bioaccumulation and toxicity. Finally, an environmental risk assessment of the OMP residues was conducted by means of the risk quotient approach. The results indicate that PAC addition increased the removal of most of the key OMPs (e.g., sulfamethoxazole, diclofenac, lidocaine) and OMP classes (e.g., antibiotics, psychiatric drugs and stimulants) with the highest loads in the WWTP influent. The hybrid MBR also reduced the risk in the receiving water as the PAC dosage increased mainly for spiramycin, lorazepam, oleandomycin. Finally, uncertainties and issues related to the investigation being carried out at full-scale under real conditions are discussed.

Removal of organic micropollutants in biologically active filters: A systematic quantitative review of key influencing factors

Biofiltration utilizes natural mechanisms including biodegradation and biotransformation along with other physical processes for the removal of organic micropollutants (OMPs) such as pharmaceuticals, personal care products, pesticides and industrial compounds found in (waste)water. In this systematic review, a total of 120 biofiltration studies from 25 countries were analyzed, considering various biofilter configurations, source water types, biofilter media and scales of operation. The study also provides a bibliometric analysis to identify the emerging research trends in the field. The results show that granular activated carbon (GAC) either alone or in combination with another biofiltration media can remove a broad range of OMPs efficiently. The impact of pre-oxidation on biofilter performance was investigated, revealing that pre-oxidation significantly improved OMP removal and reduced the empty bed contact time (EBCT) needed to achieve a consistently high OMP. Biofiltration with pre-oxidation had median removals ranging between 65% and >90% for various OMPs at 10-45 min EBCT with data variability drastically reducing beyond 20 min EBCT. Biofiltration without pre-oxidation had lower median removals with greater variability. The results demonstrate that pre-oxidation greatly enhances the removal of adsorptive and poorly biodegradable OMPs, while its impact on other OMPs varies. Only 19% of studies we reviewed included toxicity testing of treated effluent, and even fewer measured transformation products. Several studies have previously reported an increase in effluent toxicity because of oxidation, although it was successfully abated by subsequent biofiltration in most cases. Therefore, the efficacy of biofiltration treatment should be assessed by integrating toxicity testing into the assessment of overall removal.

New findings on the occurrence, removal, and risk assessment of nonylphenol and octylphenol in industrial wastewater treatment plants in Korea

Nonylphenol (NP) and octylphenol (OP), extensively used in industries, can disrupt the human endocrine system and cause significant ecological toxicity. Therefore, in this study, we aimed to reveal the occurrence and removal characteristics of NP and OP in 30 industrial wastewater treatment plants (IWWTPs). Specifically, this study focused on 13 NP isomers that have not been previously reported. Additionally, the potential environmental risk of NP and OP discharged from IWWTPs was assessed using a minimum dilution factor (MDF), proposed for the first time in this study. We showed that the concentration and proportion of the isomer NP11 were higher than those of the other isomers in the IWWTP influents and effluents. We also identified an activated sludge-activated carbon adsorption process suitable for removing NP and OP. Finally, we proposed the MDF value of 11 for the potential environmental risk assessment of NP and OP, revealing that OP poses a higher risk than NP when discharged into surface water. These findings underscore the importance of focusing on the isomer NP11 and OP in IWWTPs.

Mitigating risks and maximizing sustainability of treated wastewater reuse for irrigation

Scarcity of freshwater for agriculture has led to increased utilization of treated wastewater (TWW), establishing it as a significant and reliable source of irrigation water. However, years of research indicate that if not managed adequately, TWW may deleteriously affect soil functioning and plant productivity, and pose a hazard to human and environmental health. This review leverages the experience of researchers, stakeholders, and policymakers from Israel, the United-States, and Europe to present a holistic, multidisciplinary perspective on maximizing the benefits from municipal TWW use for irrigation. We specifically draw on the extensive knowledge gained in Israel, a world leader in agricultural TWW implementation. The first two sections of the work set the foundation for understanding current challenges involved with the use of TWW, detailing known and emerging agronomic and environmental issues (such as salinity and phytotoxicity) and public health risks (such as contaminants of emerging concern and pathogens). The work then presents solutions to address these challenges, including technological and agronomic management-based solutions as well as source control policies. The concluding section presents suggestions for the path forward, emphasizing the importance of improving links between research and policy, and better outreach to the public and agricultural practitioners. We use this platform as a call for action, to form a global harmonized data system that will centralize scientific findings on agronomic, environmental and public health effects of TWW irrigation. Insights from such global collaboration will help to mitigate risks, and facilitate more sustainable use of TWW for food production in the future.

Olive stone as an eco-friendly bio-adsorbent for elimination of methylene blue dye from industrial wastewater

Adsorbents synthesized by activation and nanoparticle surface modifications are expensive and might pose health and ecological risks. Therefore, the interest in raw waste biomass materials as adsorbents is growing. In batch studies, an inexpensive and effective adsorbent is developed from raw olive stone (OS) to remove methylene blue (MB) from an aqueous solution. The OS adsorbent is characterized using scanning electron microscopy (SEM), Fourier Transform Infra-Red (FTIR), and Brunauer-Emmett-Teller (BET) surface area. Four isotherms are used to fit equilibrium adsorption data, and four kinetic models are used to simulate kinetic adsorption behavior. The obtained BET surface area is 0.9 m2 g-1, and the SEM analysis reveals significant pores in the OS sample that might facilitate the uptake of heavy compounds. The Langmuir and Temkin isotherm models best represent the adsorbtion of MB on the OS, with a maximum monolayer adsorption capacity of 44.5 mg g-1. The best dye color removal efficiency by the OS is 93.65% from an aqueous solution of 20 ppm at the OS doses of 0.2 g for 90 min contact time. The OS adsorbent serves in five successive adsorption cycles after a simple filtration-washing-drying process, maintaining MB removal efficiency of 91, 85, 80, and 78% in cycles 2, 3, 4, and 5, respectively. The pseudo second-order model is the best model to represent the adsorption process dynamics. Indeed, the pseudo second-order and the Elovich models are the most appropriate kinetic models, according to the correlation coefficient (R2) values (1.0 and 0.935, respectively) derived from the four kinetic models. The parameters of the surface adsorption are also predicted based on the mass transfer models of intra-particle diffusion and Bangham and Burt. According to the thermodynamic analysis, dye adsorption by the OS is endothermic and spontaneous. As a result, the OS material offers an efficient adsorbent for MB removal from wastewater that is less expensive, more ecologically friendly, and economically viable.

How effective is biological activated carbon in removing micropollutants? A comprehensive review

Micropollutants (MPs), also called emerging contaminants, are detected in various environmental compartments. Wastewater is their main entry pathway due to the incomplete removal of MPs in wastewater treatment plants (WWTPs). These contaminants are a risk to human health and the integrity of the ecosystem because they are persistent and toxic to organisms. Complementary treatments such as adsorption are studied to increase the efficiency of existing WWTPs. However, a disadvantage of using activated carbon is its high cost of production and regeneration. Biological activated carbon (BAC) is an alternative to overpass this scenario. In BAC, biofilm development occurs on the surface of activated carbon, which enables bioregeneration of the adsorbent and extends its lifetime. This review focused on the studies that applied BAC to remove MPs in aqueous matrices. The review methodology was based on bibliometric and systematic analysis. Tables and thematic maps were presented to investigate trends and gaps in research and related themes. The study points out the leading MPs researched in adsorption in the last ten years. The systematic analysis showed that most studies bring sequential treatments with real wastewater/water, in which BAC is the final process. BAC has the potential to be a complementary treatment for removing MPs. However, there is a lack of articles investigating only BAC as the main tertiary treatment. Topics that should be further investigated in this area are the microbiological community formed in the biofilm, the column's lifetime, and the cost analysis of BAC implementation and operation.

Key constructed wetland design features for maximized micropollutant removal from treated municipal wastewater: A literature study based on 16 indicator micropollutants

The removal of micropollutants from wastewater by constructed wetlands (CWs) has been extensively studied and reviewed over the past years. However, most studies do not specifically focus on the removal of micropollutants from the effluent of conventional wastewater treatment plants (WWTP) that still contains micropollutants, but on the removal of micropollutants from raw wastewater. Raw wastewater has a significantly different composition compared to WWTP effluent, which positively or negatively affects micropollutant removal mechanisms. To determine the optimal CW design for post-treatment of WWTP effluent to achieve additional micropollutant removal, this review analyzes the removal of 16 Dutch indicator micropollutants for post-treatment technology evaluation from WWTP effluent by different types of CWs. It was concluded that CW systems with organic enhanced adsorption substrates reach the highest micropollutant removal efficiency as a result of adsorption, but that the longevity of the enhanced adsorption effect is not known in the systems studied until now. Aerobic biodegradation and photodegradation are other relevant removal mechanisms for the studied micropollutants. However, a current knowledge gap is whether active aeration to stimulate the aerobic micropollutant biodegradation results in an increased micropollutant removal from WWTP effluent. Further knowledge gaps that impede the wider application of CW systems for micropollutant removal from WWTP effluent and allow a fair comparison with other post-treatment technologies for enhanced micropollutant removal, such as ozonation and activated carbon adsorption, relate to i) saturation of enhanced adsorption substrate; ii) the analysis of transformation products and biological effects; iii) insights in the relationship between microbial community composition and micropollutant biodegradation; iv) plant uptake and in-plant degradation of micropollutants; v) establishing design rules for appropriate hydraulic loading rates and/or hydraulic retention times for CWs dedicated to micropollutant removal from WWTP effluent; and vi) the energy- and carbon footprint of different CW systems. This review finishes with detailed suggestions for future research directions that provide answers to these knowledge gaps.

An advanced treatment process for 3-high wastewater discharged from crude oil storage tanks

The wastewater discharged from crude oil storage tanks (WCOST) contains high concentrations of salt and metal iron ions, and high chemical oxygen demand (COD). It belongs to "3-high" wastewater, which is difficult for purification. In this study, WCOST treatments were comparatively investigated via an advanced pretreatment and the traditional coagulation-microfiltration (CMF) processes. After WCOST was purified through the conventional CMF process, fouling occurred in the microfiltration (MF) membrane, which is rather harmful to the following reverse osmosis (RO) membrane unit, and the effluent featured high COD and UV254 values. The analysis confirmed that the MF fouling was due to the oxidation of ferrous ions, and the high COD and UV254 values were mainly attributable to the organic compounds with small molecular sizes, including aromatic-like and fulvic-like compounds. After the pretreatment of the advanced process consisting of aeration, manganese sand filtration, and activated carbon adsorption in combination with CMF process, the removal efficiencies of organic matter and total iron ions reached 97.3% and 99.8%, respectively. All the water indexes of the effluent, after treatment by the advanced multi-unit process, meet well the corresponding standard. The advanced pretreatment process reported herein displayed a great potential for alleviating the MF membrane fouling and enhanced the lifetime of the RO membrane system in the 3-high WCOST treatment.

Assessment of the Presence of Transformation Products of Certain Pharmaceutical Products (Psychotropic Family) by Suspect and Non-Targeted HRMS Screening in Wastewater Treatment Plants

Aquatic environments are the final receptors of human emissions and are therefore contaminated by molecules, such as pharmaceuticals. After use, these compounds and their metabolites are discharged to wastewater treatment plants (WWTPs). During wastewater treatment, compounds may be eliminated or degraded into transformation products (TPs) or may be persistent. The aim of this study was to develop an analytical method based on high resolution mass spectrometry (HRMS) for the identification of six psychotropic drugs that are widely consumed in France and present in WWTPs, as well as their potential associated metabolites and TPs. Four out of six psychotropic drugs and between twenty-five and thirty-seven potential TPs were detected in wastewater, although this was based on full scan data. TPs not reported in the literature and specific to the study sites and therefore to the wastewater treatment processes were tentatively identified. For the selected drugs, most known and present TPs were identified, such as desmethylvenlafaxine or norcitalopram. Moreover, the short fragmentation study led rather to the identification of several TPs of carbamazepine as ubiquitous persistent TPs.

Activated carbon enhanced traditional activated sludge process for chemical explosion accident wastewater treatment

With the development of industries, explosion accidents occur frequently during production, transportation, usage and storage of hazard chemicals. It remained challenging to efficiently treat the resultant wastewater. As an enhancement of traditional process, the activated carbon-activated sludge (AC-AS) process has a promising potential in treating wastewater with high concentrations of toxic compounds, chemical oxygen demand (COD) and ammonia nitrogen (NH₄⁺-N), etc. In this paper, activated carbon (AC), activated sludge (AS) and AC-AS were used to treat the wastewater produced from an explosion accident in the Xiangshui Chemical Industrial Park. The removal efficiency was assessed by the removal performances of COD, dissolved organic carbon (DOC), NH₄⁺-N, aniline and nitrobenzene. Increased removal efficiency and shortened treatment time were achieved in the AC-AS system. To achieve the same COD, DOC and aniline removal (90%), the AC-AS system saved 30, 38 and 58 h compared with the AS system, respectively. The enhancement mechanism of AC on the AS was explored by metagenomic analysis and three-dimensional excitation-emission-matrix spectra (3DEEMs). More organics, especially aromatic substances were removed in the AC-AS system. These results showed that the addition of AC promoted the microbial activity in pollutant degradation. Bacteria, such as Pyrinomonas, Acidobacteria and Nitrospira and genes, such as hao, pmoA-amoA, pmoB-amoB and pmoC-amoC, were found in the AC-AS reactor, which might have played important roles in the degradation of pollutants. To sum up, AC might have enhanced the growth of aerobic bacteria which further improved the removal efficiency via the combined effects of adsorption and biodegradation. The successful treatment of Xiangshui accident wastewater using the AC-AS demonstrated the potential universal characteristics of the process for the treatment of wastewater with high concentration of organic matter and toxicity. This study is expected to provide reference and guidance for the treatment of similar accident wastewaters.

Study of the Influence of the Wastewater Matrix in the Adsorption of Three Pharmaceuticals by Powdered Activated Carbon

The use of powdered activated carbon (PAC) as an absorbent has become a promising option to upgrade wastewater treatment plants (WWTPs) that were not designed to remove pharmaceuticals. However, PAC adsorption mechanisms are not yet fully understood, especially with regard to the nature of the wastewater. In this study, we tested the adsorption of three pharmaceuticals, namely diclofenac, sulfamethoxazole and trimethoprim, onto PAC under four different water matrices: ultra-pure water, humic acid solution, effluent and mixed liquor from a real WWTP. The adsorption affinity was defined primarily by the pharmaceutical physicochemical properties (charge and hydrophobicity), with better results obtained for trimethoprim, followed by diclofenac and sulfamethoxazole. In ultra-pure water, the results show that all pharmaceuticals followed pseudo-second order kinetics, and they were limited by a boundary layer effect on the surface of the adsorbent. Depending on the water matrix and compound, the PAC capacity and the adsorption process varied accordingly. The higher adsorption capacity was observed for diclofenac and sulfamethoxazole in humic acid solution (Langmuir isotherm, R² > 0.98), whereas better results were obtained for trimethoprim in the WWTP effluent. Adsorption in mixed liquor (Freundlich isotherm, R² > 0.94) was limited, presumably due to its complex nature and the presence of suspended solids.

Effective and Low-Cost Adsorption Procedure for Removing Chemical Oxygen Demand from Wastewater Using Chemically Activated Carbon Derived from Rice Husk

Wastewater treatment by adsorption onto activated carbon is effective because it has a variety of benefits. In this work, activated carbon prepared from rice husk by chemical activation using zinc chloride was utilized to reduce chemical oxygen demand from wastewater. The as-prepared activated carbon was characterized by scanning electron microscope, Fourier transform infrared spectroscopy and nitrogen adsorption/desorption analysis. The optimum conditions for maximum removal were achieved by studying the impact of various factors such as solution pH, sorbent dose, shaking time and temperature in batch mode. The results displayed that the optimum sorption conditions were achieved at pH of 3.0, sorbent dose of 0.1 g L−1, shaking time of 100 min and at room temperature (25 °C). Based on the effect of temperature, the adsorption process is exothermic in nature. The results also implied that the isothermal data might be exceedingly elucidated by the Langmuir model. The maximum removal of chemical oxygen demand by the activated carbon was 45.9 mg g−1. The kinetic studies showed that the adsorption process follows a pseudo-first order model. The findings suggested that activated carbon from rice husk may be used as inexpensive substitutes for commercial activated carbon in the treatment of wastewater for the removal of chemical oxygen demand.

Adsorption kinetics of 20 glucocorticoids at environmentally relevant concentrations in wastewater by powdered activated carbons and development of surrogate models

Glucocorticoids (GCs) are widely used in the treatment of the coronavirus disease of 2019 (COVID-19), and the toxicity of GCs to aquatic organisms has aroused widespread concern. Powdered activated carbon (PAC) has proven effective in removing various trace organic pollutants. In this study, the adsorption behaviors of 20 typical GCs onto PACs were investigated at environmentally relevant concentrations (ng/L) in real wastewater, using four commercially available PACs (HDB, WPH, 20BF, PWA). The results showed that PAC adsorption was feasible for GC removal at ng/L concentrations. After adsorption for 60 min, the GC removal efficiencies obtained by HDB, WPH, 20BF, and PWA were 90-98 %, 89-97 %, 84-96 %, and 71-90 %, respectively. The adsorption processes of 20 GCs on PACs were well fitted by the pseudo-second-order kinetics model (with R ² >0.98). Among the four PACs, HDB achieved the highest rates because of the electrostatic attraction between HDB (positively charged) and the complex of GCs and natural organic matter (GC-NOM, negatively charged). Among the 20 GCs, compounds with substitutions of halogen atoms or five-membered rings at C-17 achieved higher adsorption rates because of the enhanced formation of hydrogen bonds and a resulting increase in electron density. In addition, surrogate models with total fluorescence (TF) and ultraviolet absorbance at 254 nm (UV₂₅₄) were developed to monitor the attenuation trend of GCs during adsorption processes. Compared with the UV₂₅₄ model, the TF model showed better sensitivity to GC monitoring, which could greatly simplify the water quality monitoring process and facilitate online monitoring of GCs in water.

European scale assessment of the potential of ozonation and activated carbon treatment to reduce micropollutant emissions with wastewater

Micropollutants (MPs) in wastewater pose a growing concern for their potential adverse effects on the receiving aquatic environment, and some countries have started requiring that wastewater treatment plants remove them to a certain extent. Broad spectrum advanced treatment processes, such as ozonation, activated carbon or their combination, are expected to yield a significant reduction in the toxicity of effluents. Here we quantify the reduction of effluent toxicity potentially achieved by implementing these advanced treatment solutions in a selection of European wastewater treatment plants. To this end, we refer to a list of "total pollution proxy substances" (TPPS) composed of 1337 chemicals commonly found in wastewater effluents according to a compilation of datasets of measured concentrations. We consider these substances as an approximation of the "chemical universe" impinging on the European wastewater system. We evaluate the fate of the TPPS in conventional and advanced treatment plants using a compilation of experimental physicochemical properties that describe their sorption, volatilization and biodegradation during activated sludge treatment, as well as known removal efficiency in ozonation and activated carbon treatment, while filling the gaps through in silico prediction models. We estimate that the discharge of micropollutants with wastewater effluents in the European Union has a cumulative MP toxicity to the environment equal to the discharge of untreated wastewater of ca. 160 million population equivalents (PE), i.e. about 30 % of the generated wastewater in the EU. If all plants above a capacity of 100,000 PE were equipped with advanced treatment, we show that this load would be reduced to about 95 million PE. In addition, implementing advanced treatment in wastewater plants above 10,000 PE discharging to water bodies with an average dilution ratio smaller than 10 would yield a widespread improvement in terms of exposure of freshwater ecosystems to micropollutants, almost halving the part of the stream network exposed to the highest toxic risks. Our analysis provides background for a cost-effectiveness appraisal of advanced treatment "at the end of the pipe", which could lead to optimized interventions. This should not be regarded as a stand-alone solution, but as a complement to policies for the control of emissions at the source for the most problematic MPs.

Water reuse from wastewater treatment: The transition towards circular economy in the water sector

Water is crucial for economic development since it interacts with the agricultural, production, and energy sectors. However, the increasing demand and climate change put pressure on water sources. This paper argued the necessity of using reclaimed water for irrigation within the scope of a circular economy. The barriers (i.e., technological and economic, institutional/regulatory, and social) to water reuse practices were revealed. Lessons on how to overcome the barriers were learned from good practices. The roadmaps adopted in the European Union for the transition towards the circular economy were reviewed. It has been observed that these roadmaps are generally on the circularity of solid wastes. However, water is too important for the economy to be ignored in the transition towards circular economy. Research needs and perspective for a comprehensive roadmap to widen water-smart solutions such as water reuse were drawn.

Hospital wastewater treatment and the role of membrane filtration - removal of micropollutants and pathogens: A review

Dissemination of multiresistant bacteria and high concentrations of micropollutants by hospitals and other medical facilities can be significantly reduced by a wide variety of on-site treatment approaches. Membrane filtration technologies, ranging from microfiltration to reverse osmosis, have been adapted in many studies and offer multiple purposes in advanced wastewater treatment configurations. While the direct rejection of pharmaceutical compounds and pathogens can only be achieved with nanofiltration and reverse osmosis processes, porous membranes are known for their pathogen removal capabilities and can be used in combination with other advanced treatment approaches, such as oxidation and adsorption processes. This review was conducted to systematically assess studies with membrane filtration technologies that are used as either stand-alone or hybrid systems for the treatment of hospital wastewater. In this review, four different databases were screened with a pre-set of search strings to thoroughly investigate the application of membrane filtration technology in hospital wastewater treatment. Hybrid systems that combine multiple treatment technologies seem to be the most promising way of consistently removing micropollutants and pathogens from hospital wastewater, but additional economic assessments are needed for an extensive evaluation.

Anaerobic membrane bioreactors for pharmaceutical-laden wastewater treatment: A critical review

Pharmaceuticalsare a diverse group of chemical compounds widely used for prevention and treatment of infectious diseases in both humans and animals. Pharmaceuticals, either in their original or metabolite form, find way into the wastewater treatment plants (WWTPs) from different sources. Recently, anaerobic membrane bioreactors (AnMBR) has received significant research attention for the treatment of pharmaceuticals in various wastewater streams. This review critically examines the behaviour and removal of a wide array of pharmaceuticals in AnMBR with primary focus on their removal efficiencies and mechanisms, critical influencing factors, and the microbial community structures. Subsequently, the inhibitory effects of pharmaceuticals on the performance of AnMBR and membrane fouling are critically discussed. Furthermore, the imperative role of membrane biofouling layer and its components in pharmaceuticals removal is highlighted. Finally, recent advancements in AnMBR configurations for membrane fouling control and enhanced pharmaceuticals removal are systemically discussed.

Removal of micropollutants using a membrane bioreactor coupled with powdered activated carbon - A statistical analysis approach

The occurrence of micropollutants in wastewater is largely documented as well as the environmental risk posed by their residues in the aquatic environment. Many investigations have been carried out and plan to study and improve their removal efficiency in existing wastewater treatment plants. At the same time, efforts are being made to develop new technologies or upgrade existing ones to increase the removal of a selection of micropollutants. Due to the great variability in their chemical and physical properties, it would be advisable to find representative compounds or identify the factors which most influence the removal mechanisms under specific conditions. This study analyses the removal efficiencies of a great number of micropollutants in wastewater treated in a membrane bioreactor coupled with powdered activated carbon (PAC), which was the subject of a review article we have recently published. The main operational parameters (i.e. PAC dosage, PAC retention time and sludge retention time) and compound physico-chemical properties (i.e. octanol-water distribution coefficient, charge and molecular weight) were first selected on the basis of a dedicated screening step and then an attempt was carried out to clarify their influence on the removal of micropollutants from wastewater during its treatment. To this end, a statistical analysis, mainly based on exploratory methods (cluster analysis and principal component analysis) and regression analysis, was carried out to compare and discuss the different results published in the scientific literature included in the cited review article. It emerged, that, based on the collected dataset, micropollutant charge and LogD_ow seem to play the most important role in the removal mechanisms occurring in MBR coupled with PAC.

Renewable adsorbents from the solid residue of sewage sludge hydrothermal liquefaction for wastewater treatment

Solid residue from hydrothermal liquefaction (HTL) of nutrient rich feedstock presents a promising source to recover valuable nutrients, such as phosphorus, in the solid form. The present work shows for the first time the potential of utilizing the waste residue remaining after nutrients extraction from HTL of sewage sludge, as renewable adsorbents. A parametric study was undertaken to investigate the influence of chemical activation conditions (temperature, residence time, activation agent loading, washing after activation) on raw and partially demineralized HTL solids. Kinetic and equilibrium adsorption investigation was undertaken for the removal of methylene blue (MB) from aqueous solution. For comparison purposes, a commercial activated charcoal (AC) was used. Demineralization was found to have a significant influence in the adsorption capacity of the resultant adsorbents. Three adsorbents were found to follow the Langmuir adsorption model, while the acid washed demineralized adsorbent had higher adsorption capacity than AC and was found to follow the Freundlich adsorption model. The superior performance of the acid washed demineralized adsorbent was verified from the kinetic study where all adsorbents were found to best fit the pseudo-second order model. Adsorption capacities for MB at equilibrium were 367.1, 332.3, 297.4 and 87.6 mg/g, for acid washed demineralized adsorbent, AC, demineralized adsorbent, and raw adsorbent, respectively. Finally, the most promising adsorbents were assessed for their adsorption capacity to remove pharmaceuticals present in a real wastewater treatment effluent. Results indicated ultimate concentration for all targeted compounds below the detection limits for acid washed demineralized adsorbent, AC and demineralized adsorbent. Future implementation of HTL technology in wastewater treatment facilities, will not only provide an efficient way to valorize sewage sludge into bio-crude and nutrients, but can also enhance technology integration by providing the precursors for renewable adsorbents needed in tertiary treatment of wastewater.

Elimination of microplastics from the aquatic milieu: A dream to achieve

Microplastics (MPs) have become a significant source of concern as they have emerged as a widespread pollutant that harms the aquatic environment. It has become an enormous challenge, having the capacity to biomagnify and eventually affect human health, biodiversity, aquatic animals, and the environment. This review provides in-depth knowledge of how MPs interact with different toxic organic chemicals, antibiotics, and heavy metals in the aquatic environment and its consequences. Membrane technologies like ultrafiltration (UF), nanofiltration (NF), microfiltration (MF), and dynamic membranes can be highly effective techniques for the removal of MPs. Also, hybrid membrane techniques like advanced oxidation processes (AOPs), membrane fouling, electrochemical processes, and adsorption processes can be incorporated for superior efficiency. The review also focuses on the reactor design and performance of several membrane-based filters and bioreactors to develop practical, feasible, and sustainable membrane technologies. The main aim of this work is to throw light on the alarming scenario of microplastic pollution in the aquatic milieu and strategies that can be adopted to tackle it.

A comparison of adsorption of organic micropollutants onto activated carbon following chemically enhanced primary treatment with microsieving, direct membrane filtration and tertiary treatment of municipal wastewater

The adsorption of organic micropollutants onto powdered activated carbon (PAC) was investigated in laboratory scale based on samples from four wastewater process streams (matrices); three from a pilot-scale plant with different degrees of physicochemical treatment of municipal wastewater and one from a full-scale activated sludge plant with post-precipitation. The pilot-scale treatment consisted of chemically enhanced primary treatment with microsieving followed by direct membrane filtration as microfiltration or ultrafiltration. The results showed highest adsorption of micropollutants in the tertiary (biologically and chemically) treated wastewater and lowest adsorption in the microsieve filtrate. Adsorption of micropollutants in the direct membrane microfiltration (200 nm) permeate was generally similar to that in the direct membrane ultrafiltration (3 nm) permeate. The higher adsorption of micropollutants in the tertiary treated wastewater could be related to a lower concentration of dissolved organic carbon (DOC) and lower affinity of DOC for PAC at low dosage (<15 mg PAC/L) in this matrix. At a PAC dose of 10 mg/L, sulfamethoxazole was removed by 33% in the tertiary treated wastewater and 7% in the direct membrane microfiltration permeate. In addition to the PAC experiments, a pilot scale sand filter and a proceeding GAC filter was operated on tertiary treated wastewater from the full-scale treatment plant. Similar removal trends in the PAC and GAC experiments were observed when studying a weighted average micropollutant removal in the GAC filter and a similar dose of activated carbon for both PAC and GAC. Positively charged micropollutants were removed to a higher extent than negatively charged ones by both PAC and GAC.

Pharmaceuticals and personal care products in aquatic environments and their removal by algae-based systems

The consumption of pharmaceuticals and personal care products (PPCPs) has been widely increasing, yet up to 90-95% of PPCPs consumed by human are excreted unmetabolized. Moreover, the most of PPCPs cannot be fully removed by wastewater treatment plants (WWTPs), which release PPCPs to natural water bodies, affecting aquatic ecosystems and potentially humans. This study sought to review the occurrence of PPCPs in natural water bodies globally, and assess the effects of important factors on the fluxes of pollutants into receiving waterways. The highest ibuprofen concentration (3738 ng/L) in tap water was reported in Nigeria, and the highest naproxen concentration (37,700 ng/L) was reported in groundwater wells in Penn State, USA. Moreover, the PPCPs have affected aquatic organisms such as fish. For instance, up to 24.4 × 10³ ng/g of atenolol was detected in P. lineatus. Amongst different technologies to eliminate PPCPs, algae-based systems are environmentally friendly and effective because of the photosynthetic ability of algae to absorb CO₂ and their flexibility to grow in different wastewater. Up to 99% of triclosan and less than 10% of trimethoprim were removed by Nannochloris sp., green algae. Moreover, variable concentrations of PPCPs might adversely affect the growth and production of algae. The exposure of algae to high concentrations of PPCPs can reduce the content of chlorophyll and protein due to producing reactive oxygen species (ROS), and affecting expression of some genes in chlorophyll (rbcL, psbA, psaB and psbc).

SWOT-SOR Analysis of Activated Carbon-Based Technologies and O3/UV Process as Polishing Treatments for Hospital Effluent

The management and treatment of hospital wastewater are issues of great concern worldwide. Both in the case of a dedicated treatment or co-treatment with urban wastewater, hospital effluent is generally subjected to pre-treatments followed by a biological step. A polishing treatment is suggested to promote (and guarantee) the removal of micropollutants still present and to reduce the total pollutant load released. Activated carbon-based technologies and advanced oxidation processes have been widely investigated from technical and economic viewpoints and applied in many cases. In this study, the potential exploitation of these technologies for the polishing treatment of hospital effluent is investigated by combining a Strengths, Weaknesses, Opportunities and Threats (SWOT) analysis with a Strategic Orientation (SOR) analysis. This approach allows a coherent strategy to be extracted from the SWOT-SOR data, increasing the chances of success of each technology. It emerges that both technologies present relevant and sometimes similar strengths and can present opportunities. At the same time, activated carbon-based technologies are more likely to contain the main identified threats than O3/UV technology. The study also finds that, for both technologies, further research and development could improve their potential applications in the treatment of hospital wastewater.

Strategies to enhance micropollutant removal from wastewater by membrane bioreactors: Recent advances and future perspectives

Membrane bioreactor (MBR) has been widely implemented to advance wastewater treatment and reuse. Nevertheless, conventional MBRs with porous microfiltration or ultrafiltration membranes are not designed for the removal of micropollutants, which ubiquitously occur in wastewater at trace concentrations, but potentially exert detrimental impacts to the ecosystem. Several effective strategies have been applied to improve MBR performance for micropollutant removal, particularly the hydrophilic and recalcitrant compounds. These strategies mainly include the optimization of operational conditions, employment of high-retention membranes to replace porous ones, addition of functional materials into bioreactor, and integration of effluent purification processes. In particular, effluent purification by advanced oxidation processes (AOPs) and high-retention membranes can complement MBR to secure almost complete removal of micropollutants. Nevertheless, further research is still necessary to evaluate the technical and economic feasibility of these strategies, especially for long-term treatment performance, to screen the suitable techniques for industrial MBR applications.

Surface Modified Activated Carbons: Sustainable Bio-Based Materials for Environmental Remediation

Global warming and water/air contamination caused by human activities are major challenges in environmental pollution and climate change. The improper discharge of a large amount of agro-forest byproduct is accelerating these issues mainly in developing countries. The burning of agricultural byproducts causes global warming, whereas their improper waste management causes water/air pollution. The conversion of these waste materials into effective smart materials can be considered as a promising strategy in waste management and environmental remediation. Over the past decades, activated carbons (ACs) have been prepared from various agricultural wastes and extensively used as adsorbents. The adsorption capacity of ACs is linked to a well-developed porous structure, large specific surface area, and rich surface functional moieties. Activated carbon needs to increase their adsorption capacity, especially for specific adsorbates, making them suitable for specific applications, and this is possible by surface modifications of their surface chemistry. The modifications of surface chemistry involve the introduction of surface functional groups which can be carried out by various methods such as acid treatment, alkaline treatment, impregnation, ozone treatment, plasma treatment, and so on. Depending on the treatment methods, surface modification mainly affects surface chemistry. In this review, we summarized several modification methods for agricultural-waste-based ACs. In addition, the applications of AC for the adsorption of various pollutants are highlighted.