Mechanism of persulfate activation by biochar for the catalytic degradation of antibiotics: Synergistic effects of environmentally persistent free radicals and the defective structure of biochar

Lignocellulosic biomass for biochar production: A green initiative on biowaste conversion for pharmaceutical and other emerging pollutant removal

Lignocellulosic waste generation and their improper disposal has accelerated the problems associated with increased greenhouse gas emissions and associated environmental pollution. Constructive ways to manage and mitigate the pollution associated with lignocellulosic waste has propelled the research on biochar production using lignocellulose-based substrates. The sustainability of various biochar production technologies in employing lignocellulosic biomass as feedstock for biochar production not only aids in the lignocellulosic biomass valorization but also helps in carbon neutralization and carbon utilization. Functionalization of biochar through various physicochemical methods helps in improving their functional properties majorly by reducing the size of the biochar particles to nanoscale and modifying their surface properties. The usage of engineered biochar as nano adsorbents for environmental applications like dye absorption, removal of organic pollutants and endocrine disrupting compounds from wastewater has been the thrust areas of research in the past few decades. This review presents a comprehensive outlook on the up-to-date research findings related to the production and engineering of biochar from lignocellulosic biomass and their applications in environmental remediation especially with respect to wastewater treatment. Further a detailed discussion on various biochar activation methods and the future scope of biochar research is presented in this review work.

Influence of microplastics and environmentally persistent free radicals on the ability of biochar components to promote degradation of antibiotics by activated peroxymonosulfate

Microplastics (MPs) in sludge can affect the ability of biochar-activated peroxymonosulfate (PMS) to degrade antibiotics. In this work, biochar was prepared by mixing sludge and polystyrene (PS) through hydrothermal carbonization (HTC) and high-temperature pyrolysis processes. The resulting biochar was used to activate PMS to degrade ofloxacin (OFX), levofloxacin (LEV), and pefloxacin (PFX). The addition of PS significantly enhanced the ability of biochar/PMS to degrade antibiotics and the levels of environmentally persistent free radicals (EPFRs, 4.59 × 1020 spin/g) due to the decomposition of PS. The addition of PS resulted in a slight decrease in the specific surface area of biochar (2-3 m2/g on average), but a significant increase in the concentration of EPFRs increased the removal efficiency. The activation of PMS by biochar is dominated by free radicals, accounting for about 70%, in which SO4•- and •OH contribute the most and O2•- the least. However, 1O2 contributes 15-20% to the degradation of antibiotics in non-free radical processes. Overall, the process of biochar/PMS degradation of antibiotics is mainly dominated by free radicals, and the effect of non-free radicals is not obvious. Both hydrochar and pyrocarbon samples showed good hydrophilicity, and this property should improve the ability of active sites on biochar to degrade antibiotics. In the HTC process, PS can decompose during hydrochar preparation, with a maximum reduction value of 40.09%. The three-dimension excitation emission matrix fluorescence spectroscopy (3D-EEM) and total organic carbon (TOC) results show that the protein content in sludge plays a major role in reducing PS, with little effect of polysaccharide and SiO2. There are six to seven degradation intermediates of quinolone antibiotics, which are eventually degraded into CO2, H2O, and inorganic substances. The regeneration experiment showed good reusability of hydrochar and pyrocarbon, further demonstrating the suitability of biochar for the degradation of antibiotics.

MoS2-based nanocomposites and aerogels for antibiotic pollutants removal from wastewater by photocatalytic degradation process: A review

Photocatalytic technologies based on molybdenum disulfide (MoS2) catalysts are effective, eco-friendly, and promising for antibiotic pollutants treatment. The technologies used by MoS2-based nanocomposites and aerogels for efficient degradation of antibiotics are reviewed in detail for the first time in this paper. The fundamental aspects of MoS2 were comprehensively scrutinized, encompassing crystal structure, optical properties, and photocatalytic principle. Then, the main synthesized methods and advantages/disadvantages for the preparation of MoS2-based nanocomposites and aerogels were systematically presented. Besides, a comprehensive overview of diverse MoS2-based nanocomposites and aerogels photo-degradation systems that enhanced the degradation of antibiotic pollutants were revealed. Meanwhile, the photo-degradation mechanism concentrated on the photoelectron transfer pathways and reactive oxygen species (ROS) were systematically evaluated. Finally, the challenges and perspectives for deeply development of MoS2-based nanocomposites and aerogels were discussed. This review may help researchers to deeply understand the research status of MoS2-based nanocomposites and aerogels for antibiotics removal, and makes clear the photo-degradation mechanism from photoelectron transfer pathways and ROS aspects of MoS2-based nanocomposites and aerogels.

Biochar-Derived Persistent Free Radicals: A Plethora of Environmental Applications in a Light and Shadows Scenario

Biochar (BC) is a carbonaceous material obtained by pyrolysis at 200-1000 °C in the limited presence of O2 from different vegetable and animal biomass feedstocks. BC has demonstrated great potential, mainly in environmental applications, due to its high sorption ability and persistent free radicals (PFRs) content. These characteristics enable BC to carry out the direct and PFRs-mediated removal/degradation of environmental organic and inorganic contaminants. The types of PFRs that are possibly present in BC depend mainly on the pyrolysis temperature and the kind of pristine biomass. Since they can also cause ecological and human damage, a systematic evaluation of the environmental behavior, risks, or management techniques of BC-derived PFRs is urgent. PFRs generally consist of a mixture of carbon- and oxygen-centered radicals and of oxygenated carbon-centered radicals, depending on the pyrolytic conditions. Here, to promote the more productive and beneficial use of BC and the related PFRs and to stimulate further studies to make them environmentally safer and less hazardous to humans, we have first reviewed the most common methods used to produce BC, its main environmental applications, and the primary mechanisms by which BC remove xenobiotics, as well as the reported mechanisms for PFR formation in BC. Secondly, we have discussed the environmental migration and transformation of PFRs; we have reported the main PFR-mediated application of BC to degrade inorganic and organic pollutants, the potential correlated environmental risks, and the possible strategies to limit them.

Peroxymonosulfate activation by walnut shell activated carbon supported nano zero-valent iron for the degradation of tetracycline: Performance, degradation pathway and mechanism

In this study, activated carbon (WS-AC) was prepared from walnut shell. Nano-zero-valent iron (nZVI) was loaded on walnut shell activated carbon by liquid phase reduction method and used as catalyst (WS-AC/nZVI) to activate peroxymonosulfate (PMS) to efficiently degrade tetracycline (TC) in solution. The composite material with a mass ratio of WS-AC to nZVI of 1:1 has the highest catalytic performance for activating PMS to degrade TC. The results showed that under the conditions of TC concentration of 100 ppm, PMS dosage of 0.2 mM and WS-AC/nZVI dosage of 0.1 g/L, the removal efficiency of TC could reach 81%. Based on quenching experiments and electron spin resonance (EPR), it was verified that •OH, SO4•- and 1O2 bound on the catalyst surface were the main reactive oxygen species during the reaction. The intermediate products of TC were identified by liquid chromatography-mass spectrometry (HPLC-MS) and DFT calculation, and the possible degradation pathway of TC was proposed. The catalyst still maintained high removal efficiency of TC after four cycles of experiments, and the minimal iron loss on the surface of the catalyst indicated that it had good stability. The efficient and stable WS-AC/nZVI activated PMS showed great potential in the degradation of antibiotics.

A review on photocatalytic attribution and process of pyrolytic biochar in environment

Biochar has attracted significant attention due to its excellent environmental benefits and extensive applications. Recently, a consensus has been accepted that biochar can act as a photocatalyst and trigger effective photocatalytic reactions in the environment, which is important to energy conversion and the cycle of elements. However, its photocatalytic processes and the corresponding environmental impacts need to receive more and due attention. In this review, we provide a comprehensive summary of the underlying correlations among the pyrolytic evolution of biomass, the structure characteristic of biochar, and the resultant photocatalytic performance. Moreover, the photocatalytic processes and the influence of environmental factors were elaborately investigated on biochar. Finally, future tendencies and challenges in the photocatalysis of biochar have been prospected in the environmental field. This review has offered innovative insights into the photocatalytic essential of biochar and highly enhanced the understanding of its environmental impact.

Domain-limited thermal transformation preparation of novel graphitized carbon-supported layered double oxides for efficient tetracycline degradation

The resource utilization of industrial lignin to construct high-performance catalysts for wastewater treatment field is pioneering research. Herein, the novel graphitized carbon-supported CuCoAl-layered double oxides (LDOs-GC) were successfully designed by the domain-limited thermal transformation technology using sodium lignosulfonate (LS) self-assembled CuCoAl-layered double hydroxides as the precursor. The optimized LDOs-GC catalyst owned the excellent tetracycline (TC) degradation of 98.0% within 15 min by activated peroxymonosulfate (PMS) under optimal conditions (20 mg/L catalyst, 1.5 mM PMS, 30 mg/L TC). The density of metal ions in the catalyst and the synergistic interaction between graphitized carbon (GC) and metal ions played a major role in TC degradation. Based on a comprehensive analysis, the TC degradation in LDOs-GC/PMS system was proved to be accomplished by a combination of free radicals (SO4·- and HO·) and non-radicals (1O2). Meanwhile, the possible degradation pathways of TC were proposed by the analysis of TC degradation intermediates and a comprehensive analysis of the rational reaction mechanism for TC degradation by LDOs-GC/PMS system was also performed. This work provides a new strategy for developing novel high-performance catalysts from industrial waste, while offering a green, cheap and sustainable approach to antibiotic degradation.

Effects of excess sludge composting process, environmentally persistent free radicals, and microplastics on antibiotics degradation efficiency of aging biochar

Simulation of microbial aging biochar in compost is an important index for evaluating the biochar degradation efficiency of antibiotics. In this study, biochar was prepared by adding microplastics (MPs) to sludge, and the degradation effect of biochar/(peroxymonosulfate, PMS) on antibiotics was evaluated during the compost aging process of biochar. After the compost aging of biochars, the antibiotic degradation efficiency of HPBC500, HPBC500 + polystyrene (PS), HPBC900/PMS, and HPBC900 + PS/PMS decreased by 6.47, 15.2, 10.16, and 10.33 %, respectively. Environmentally persistent free radicals (EPFRs) and defect structure were the main contributors to the activation of PMS. EPFRs produced through PS pyrolysis of biochar exhibited strong reactivity but poor stability during the degradation of antibiotics. Biochar enhanced the growth of microorganisms in compost but reduced its specific surface area. The antibiotic degradation efficiency of the biochar was positively correlated with the concentration of EPFRs. This study elucidated the durability of different biochar toward antibiotic degradation.

Adsorption performance of ammonium molybdate modified Salix wood flour biochar for the treatment of monosodium glutamate wastewater

ABSTRACTThe problem of wastewater pollution in the production of monosodium glutamate (MSG) is becoming more and more serious. A novel type of chemically modified Salix psammophila powder charcoal (SPPCAM) was synthesized to address the chemical oxygen demand (COD) and ammonia nitrogen (NH3-N) in MSG wastewater. SPPCAM was prepared by carbonization method, in which inorganic ammonium molybdate (AM) was used as modifier and Salix psammophila powder (SPP) was used as raw material. Under optimal treatment conditions, maximum removal rates (removal capacities) of 45.9% (3313.2 mg·L-1) for COD and 29.4% (23.2 mg·L-1) for NH3-N in MSG wastewater were achieved. The treatment results significantly outperforming the unmodified Salix psammophila powder charcoal (SPPC), which only achieved removal rates (removal capacities) of 10.6% (763.9 mg·L-1) for COD and 12.9% (10 mg·L-1) for NH3-N. SPPC and SPPCAM before and after preparation were analysed by FT-IR and XRD, and Mo ions in the form of Mo2C within SPPCAM were successfully loaded. SEM, EDS-Mapping, BET, and other methods were used to analyse SPPCAM before and after MSG wastewater treatment, demonstrating that SPPCAM effectively treated organic pollutants in monosodium glutamate wastewater. The NH3-N in the treated MSG wastewater has reached the standard of safe discharge.

Targeted degradation of naphthalene by peroxymonosulfate activation using molecularly imprinted biochar

Polycyclic aromatic hydrocarbons (PAHs) in aquatic environments are threatening ecosystems and human health. In this work, an effective and environmentally friendly catalyst based on biochar and molecular imprinting technology (MIT) was developed for the targeted degradation of PAHs by activating peroxymonosulfate. The results show that the adsorption amount of naphthalene (NAP) by molecularly imprinted biochar (MIP@BC) can reach 82% of the equilibrium adsorption capacity within 5 min, and it had well targeted adsorption for NAP in the solution mixture of NAP, QL and SMX. According to the comparison between the removal rates of NAP and QL by MIP@BC/PMS or BC/PMS system in respective pure solutions or mixed solutions, the MIP@BC/PMS system can better resist the interference of competing pollutants (i.e., QL) compared to the BC/PMS system; that is, MIP@BC had a good ability to selectively degrade NAP. Besides, the removal rate of NAP by MIP@BC/PMS gradually decreased as pH increased. The addition of Cl- greatly promoted the targeted removal of NAP in the MIP@BC/PMS system, while HCO3- and CO32- both had an inhibitory effect. Furthermore, SO4•-, O2•- and 1O2 produced by BC activating PMS dominated the NAP degradation, and it was inferred that the vacated imprinted cavities after NAP degradation can continue to selectively adsorb NAP and this could facilitate the reusability of the material. This study can promote the research on the targeted degradation of PAHs through the synergism of biochar/PMS advanced oxidation processes and MIT.

Efficient activation of peroxymonosulfate by CoMg2Mn-LDO for the degradation of orange Ⅱ: The important synergy of Mg

Advanced oxidation process (AOP) based on peroxymonosulfate (PMS) has aroused extensive discussion in the degradation of organic pollutants due to the strong oxidative ability of SO4•-. Great attention has been paid to developing transition metal catalysts for PMS activation. Still, few studies focused on the co-catalysis effect of non-redox metals. To study the co-catalysis of Mg and develop a more efficient metal catalyst, the CoMg2Mn-LDO was prepared by a co-precipitation method accompanied by calcination. The material showed an excellent ability for PMS activation. 97.1% of Orange Ⅱ was degraded within 15 min with the reaction rate constant (kobs) of 0.539 min-1 when pH equals 6.7, the dosages of CoMg2Mn-LDO and PMS were 90 mg L-1 and 100 mg L-1, respectively. By contrast, the value of kobs was 0.375 min-1 for the system of Co3Mn-LDO/PMS at the same experimental conditions. The electron paramagnetic resonance (EPR) and quenching experiments results proved the existence of O2•-, SO4•- and HO• in the CoMg2Mn-LDO/PMS system and the dominant role of SO4•- in Orange Ⅱ degradation. The synergistic effects among Co, Mn, and Mg were found to be responsible for the outstanding catalytic ability of CoMg2Mn-LDO. The presence of Mg could not only promote the formation of Mg-HSO5- and CoOH+ complexes but also reduce the leaching of Co and Mn, which accelerated the generation of free radicals and decreased secondary pollution risk. Based on the overall analysis, reasonable activation mechanisms of PMS and possible degradation pathways of Orange Ⅱ in this reaction system were proposed. This work proves that Mg could be applied as an effective co-catalytic element and provides new insight into developing transition metal catalysts for PMS-based AOPs.

Piezoelectricity ameliorates high-valent iron oxo species production in peroxymonosulfate activation for refractory atrazine remediation

Over the past few years, high-valent iron oxo species (Fe(IV)) have shown considerable promise. However, an improved solution is needed for the bottleneck of unsatisfactory electron transfer efficiency in Fe-based catalyst/PMS systems. In this study, Enteromorpha-derived biochar was pyrolyzed with iron and barium titanate (FeBCBa). Under ultrasonic treatment, it removes 94.5% of atrazine (10 mg/L) within 60 min, and is environmentally friendly. BaTiO3's piezoelectricity enhances Fe(IV) production in FeBCBa, resulting in superior performance. In the ultrasonic condition, the apparent reaction rate was 1.42 times higher than in the non-ultrasonic condition. Using density functional theory calculations, it can be shown that due to the Fe dopant, electrons in ATZ's LUMO are more easily transferred to the catalyst's HOMO, which is beneficial for ATZ removal. The results of this study provide new guidance for constructing stable and efficient catalysts for environmental remediation.

Jasmine waste derived biochar as green sulfate catalysts dominate non-free radical paths efficiently degraded tetracycline

Because of the potential environmental harm caused by the extensive application of tetracycline (TC), this study used jasmine waste rich in organic matter as a precursor and one-step carbonization into metal-free carbon-based materials to efficiently activate peroxymonosulfate (PMS) toward degrading TC. The jasmine waste biochar (JWB) with a heating rate of 10 °C min-1 and a heating temperature of 700 °C was selected as the most suitable material based on its catalytic performance. The effects of catalyst dose, PMS dose, initial pH value, coexisting inorganic anions and TC concentration on the JWB/PMS/TC system were thoroughly optimized. The results showed that the degradation efficiency of TC by JWB/PMS system was 90%. Meanwhile, the combination of electron paramagnetic resonance, masking experiments and X-ray photoelectron spectrometry confirmed that JWB degraded TC mainly through the non-radical radical pathway of 1O2 oxidation and mediated the electron transfer to PMS. In addition, some degradation products were analyzed by LC-MS and possible degradation pathways of the system were proposed. Therefore, this paper proposes a novel method for recycling jasmine waste and providing a low-cost catalyst for the oxidation treatment of refractory organic matter.

Performances of antibiotic resistance genes profile upon the action of biochar-activated peroxydisulfate in composting

In this study, the amendment of biochar-activated peroxydisulfate during composting to remove antibiotic resistance genes (ARGs) by direct (microbial community succession) and indirect methods (physicochemical factors) was analyzed. When implementing indirect methods, the synergistic effect of peroxydisulfate with biochar optimized the physicochemical habitat of compost, maintaining its moisture within a range of 62.95%-65.71%, and a pH of 6.87-7.73, and causing the compost to mature 18 days earlier than the control groups. The direct methods caused the optimized physicochemical habitat to adjust the microbial communities and reduce the abundance of most of the ARG host bacteria (Thermopolyspora, Thermobifida, and Saccharomonospora), thus inhibiting this substance's amplification. Heatmap analysis confirmed the necessary connection between physicochemical factors, microbial communities, and ARGs. Moreover, a mantel test confirmed the direct significant effect of the microbial communities on ARGs and the indirect significant effect of physicochemical factors on ARGs. The results showed that the abundance of more ARGs was down-regulated at the end of composting and regulated by biochar-activated peroxydisulfate, especially for the abundance of AbaF, tet(44), golS, and mryA, which was significantly decreased by 0.87-1.07 fold. These results provide new insights into the removal of ARGs during composting.

Compound-specific stable isotope analysis for characterization of the transformation of γ-HCH induced by biochar

The role of biochar as the redox catalyst in the removal of reductive pollutants from soil and water system has been extensively studied recently, but there is still a lack of qualitative description of its specific mechanisms in redox processes. In this study, the mechanism of biochar in the transformation process of γ-HCH under anoxic condition was revealed by the compound-specific isotope analysis. The concentration and carbon isotopic composition (δ¹³C) of γ-HCH were detected in the treatments with different initial concentrations of γ-HCH and biochar materials with different redox properties and varied doses. The surface functional groups and electrochemical properties of biochar before and after the reaction were also characterized. The addition amount of biochar could affect the reduction of γ-HCH concentration, which were 59.1%, 34.6% and 22.4% in treatments with the addition of 5%, 1% and 0.2% biochar, respectively. Meanwhile, the δ¹³C value of γ-HCH also increased from -26.6 ± 0.2‰ to -23.8 ± 0.2‰ with the addition amount of biochar, especially in the treatment with 5% biochar. As evidenced by X-ray diffraction analysis and electrochemical analysis, biochar promoted the adsorption and transformation of γ-HCH simultaneously, and the oxygen-containing functional groups on the surface of biochar played an important role in the redox process. The isotopic fractionation value (ε_C) of γ-HCH transformation by biochar was first reported as -3.4 ± 0.4‰. The results will enable the quantitative description of the transformation degree of organic pollutants induced by biochar, and provide a new approach for evaluating the in-situ remediation effects of biochar in a complex environment.

Efficient degradation of levofloxacin using a g-C3N4@glucose-derived carbon catalyst with adjustable N content via peroxymonosulfate activation

Metal-free carbon-based catalysts hold great promise for the degradation of organic pollutants by peroxymonosulfate (PMS) activation because they avoid the negative effects of metal catalysts such as harmful metal ions leaching. However, these carbon-based catalysts are limited by their high cost and complex synthesis, and the mechanisms for the activation of PMS are unclear. Herein, the N-rich carbon catalysts (GCN-x) derived from glucose and g-C₃N₄ were facilely synthesized by hydrothermal treatment and carbonization to explore the mechanism of PMS activation. The nitrogen content of catalysts could be adjusted by simply altering the ratio of glucose and g-C₃N₄. GCN-2.4 with a ratio of glucose and g-C₃N₄ of 2.4 displayed the highest efficiency for the degradation of pollutants represented by Levofloxacin. The electron paramagnetic resonance and quenching experiments demonstrated that the non-radical pathway was dominant in Levofloxacin degradation and singlet oxygen (¹O₂) was the main active specie. Further, we found ¹O₂ was generated from superoxide radical (• O₂^-) which has rarely been studied. Levofloxacin degradation rate was shown to be positively correlated with both the amount of graphitic N and pyridinic N. Graphitic N and pyridinic N were identified as the catalytic sites. The GCN-2.4/PMS system could also remove multifarious contaminants effectively. Overall, this research advances understanding of the role of N species in PMS activation and has potential practical application in wastewater treatment.

Degradation of organic pollutants from water by biochar-assisted advanced oxidation processes: Mechanisms and applications

Biochar has shown large potential in environmental remediation because of its low cost, large specific surface area, porosity, and high conductivity. Biochar-assisted advanced oxidation processes (BC-AOPs) have recently attracted increasing attention to the remediation of organic pollutants from water. However, the effects of biochar properties on catalytic performance need to be further explored. There are still controversial and knowledge gaps in the reaction mechanisms of BC-AOPs, and regeneration methods of biochar catalysts are lacking. Therefore, it is necessary to systematically review the latest research progress of BC-AOPs in the treatment of organic pollutants in water. In this review, first of all, the effects of biochar properties on catalytic activity are summarized. The biochar properties can be optimized by changing the feedstocks, preparation conditions, and modification methods. Secondly, the catalytic active sites and degradation mechanisms are explored in different BC-AOPs. Different influencing factors on the degradation process are analyzed. Then, the applications of BC-AOPs in environmental remediation and regeneration methods of different biochar catalysts are summarized. Finally, the development prospects and challenges of biochar catalysts in environmental remediation are put forward, and some suggestions for future development are proposed.

Efficient peroxymonosulfate activation by biochar-based nanohybrids for the degradation of pharmaceutical and personal care products in aquatic environments

Recently, pharmaceutical and personal care products (PPCPs) have been of wide concern due to their ecological toxicity, persistence, and ubiquity in aquatic environments. Peroxymonosulfate-based advanced oxidation processes (PMS-AOPs) have shown great potential for eliminating PPCPs due to their superior oxidation ability and adaptability. Biochar-based nanohybrids have been employed as emerging catalysts for peroxymonosulfate (PMS) activation. Until now, few researchers have summarized PMS activation by biochar-based catalysts for PPCPs removal. In this review, the types, sources, fates, and ecological toxicities of PPCPs were first summarized. Furthermore, various preparation and modification methods of biochar-based catalysts were systematically introduced. Importantly, the application of activating PMS with biochar-based multifunctional nanocomposites for eliminating PPCPs was reviewed. The influencing factors, such as catalysts dosage, PMS dosage, solution pH, temperature, anions, natural organic matters (NOMs), and pollutants concentration were broadly discussed. Biochar-based catalysts can act as electron donors, electron acceptors, and electron shuttles to activate PMS for the removal of PPCPs through radical pathways or/and non-radical pathways. The degradation mechanisms of PPCPs are correlated with persistent free radicals (PFRs), metal species, defective sites, graphitized degree, functional groups, electronic attributes, and the hybridization modes of biochar-based catalysts. Finally, the current problems and further research directions on the industrial application of biochar-based nanocomposites were proposed. This study provides some enlightenment for the efficient removal of PPCPs with biochar-based catalysts in PMS-AOPs.

Statistical modeling optimization for antibiotics decomposition by ultrasound/electro-Fenton integrated process: Non-carcinogenic risk assessment of drinking water

The present work proposes an ultrasound (US) assisted electro-Fenton (EF) process for eliminating penicillin G (PNG) and ciprofloxacin (CIP) from aqueous solutions and the process was further optimized by response surface methodology (RSM)- Box-Behnken design (BBD). The impact of pH, hydrogen peroxide (H₂O₂) concentration, applied voltage, initial pollutant concentration, and operating time were studied. The capability application of the electro-Fenton (EF) and US processes was compared separately and in combination under the optimum conditions of pH of 4, a voltage of 15 V, the initial antibiotic concentration of 20.7 mg/L, H₂O₂ concentration of 0.8 mg/L, and the operating time of 75 min. The removal efficiency of PNG and CIP using the sono-electro-Fenton (SEF) process, as the results revealed, was approximately 96% and 98%, respectively. The experiments on two scavengers demonstrated that ^⦁OH contributes significantly to the CIP and PNG degradation by SEF, whereas ^⦁O^-₂ corresponds to only a negligible amount. The total organic carbon (TOC) and chemical oxygen demand (COD) analyses were used to assess the mineralization of CIP and PNG. The efficiency of COD and TOC removal was reached at 73.25% and 62.5% for CIP under optimized operating circumstances, and at 61.52% and 72% for PNG, respectively. These findings indicate that a sufficient rate of mineralization was obtained by SEF treatment for the mentioned pollutants. The reaction kinetics of CIP and PNG degradation by the SEF process were found to follow a pseudo-first-order kinetic model. In addition, the human health risk assessment of natural water containing CIP and PNG that was purified by US, EF, and SEF processes was done for the first time. According to the findings, the non-carcinogenic risk (HQ) caused by drinking purified water by all three systems was calculated in the acceptable range. Thus, SEF is a proper system to remove various antibiotics in potable water and reduces their human health risks.

Comparison of different S-doped biochar materials to activate peroxymonosulfate for efficient degradation of antibiotics

The goal of this work was to elucidate the ability of biochar materials prepared by different methods to degrade antibiotics by activating peroxymonosulfate (PMS). S atom was doped into biochar using diphenyl disulfide (DD), sodium thiosulfate (ST), and thiourea (TU) as S precursors. The different doped materials were used to activate PMS and tested for the ability to degrade tetracycline hydrochloride, sulfadiazine sodium salt, and levofloxacin hydrochloride. The average degradation efficiencies of DD-doped hydrothermal + pyrocarbon (DD-HPBC), TU-doped hydrothermal + pyrocarbon (TU-HPBC), and ST-doped hydrothermal + pyrocarbon (ST-HPBC) were 83.76%, 86.74%, and 93.60%, respectively, all higher than the degradation efficiency of the undoped material. When sodium thiosulfate-doped pyrocarbon (ST-PBC), hydrochar (ST-HBC), and hydrothermal + pyrocarbon (ST-HPBC) were used to activate PMS, the highest degradation efficiencies were achieved, with average rates of 71.59%, 78.22% and 97.20%, respectively. ST-HPBC exhibited the highest concentration of environmentally persistent free radicals (EPFRs), 9.47 × 10¹⁸ spin/g, among all biochar materials. Given this high concentration of EPFRs, use of ST-HPBC to activate PMS resulted in a very high rate of antibiotic degradation, and the concentration of EPFRs was positively correlated with the degradation efficiency. Increase of specific surface area, the thiophene S (-C-S-C-) ratio, and concentration of EPFRs in S-doped biochars promoted the degradation of antibiotics. For PMS activated by biochar, reactive oxygen species (ROS) degraded antibiotics in the order of sulfate radical (SO₄^•-) > singlet oxygen (¹O₂) > hydroxyl radical (•OH) > superoxide radical (•O₂^-). This work provides new insight into the application of S-doped sludge biochar materials.

Metal-free graphene-based catalytic membranes for persulfate activation toward organic pollutant removal: a review

Owing to their ultrathin two-dimensional structure and efficient catalytic ability for persulfate activation, graphene-based nanocarbons exhibit considerable application potential in fabricating carbonaceous composite membranes for in situ catalytic oxidation to remove organic pollutants. This approach offers significant advantages over conventional batch systems. However, the relationships between the physicochemical properties of carbon mats and performance of graphene-based catalytic membranes in water purification remain ambiguous. Herein, we summarize the main mechanisms of in situ catalytic oxidation and the facile fabrication strategies of carbonaceous composite membranes. Different factors influencing the performance of graphene-based catalytic membranes are comprehensively discussed. The defective level, heteroatom doping, and stacking morphology of carbon mats and operational conditions during filtration play critical roles in the oxidative degradation of target pollutants. Long-term operation leads to the deterioration of catalytic activity and transmembrane pressure, especially in the complex water matrix. Finally, the present challenges and future perspectives are presented to improve the anti-fouling performance and catalytic stability of membranes and develop scalable fabrication methods to promote the engineering applications of in situ catalytic oxidation in real water purification.

Biochar-microorganism interactions for organic pollutant remediation: Challenges and perspectives

Numerous harmful chemicals are introduced every year in the environment through anthropogenic and geological activities raising global concerns of their ecotoxicological effects and decontamination strategies. Biochar technology has been recognized as an important pillar for recycling of biomass, contributing to the carbon capture and bioenergy industries, and remediation of contaminated soil, sediments and water. This paper aims to critically review the application potential of biochar with a special focus on the synergistic and antagonistic effects on contaminant-degrading microorganisms in single and mixed-contaminated systems. Owing to the high specific surface area, porous structure, and compatible surface chemistry, biochar can support the proliferation and activity of contaminant-degrading microorganisms. A combination of biochar and microorganisms to remove a variety of contaminants has gained popularity in recent years alongside traditional chemical and physical remediation technologies. The microbial compatibility of biochar can be improved by optimizing the surface parameters so that toxic pollutant release is minimized, biofilm formation is encouraged, and microbial populations are enhanced. Biocompatible biochar thus shows potential in the bioremediation of organic contaminants by harboring microbial populations, releasing contaminant-degrading enzymes, and protecting beneficial microorganisms from immediate toxicity of surrounding contaminants. This review recommends that biochar-microorganism co-deployment holds a great potential for the removal of contaminants thereby reducing the risk of organic contaminants to human and environmental health.

A Mini Review on Persulfate Activation by Sustainable Biochar for the Removal of Antibiotics

Antibiotic contamination in water bodies poses ecological risks to aquatic organisms and humans and is a global environmental issue. Persulfate-based advanced oxidation processes (PS-AOPs) are efficient for the removal of antibiotics. Sustainable biochar materials have emerged as potential candidates as persulfates (Peroxymonosulfate (PMS) and Peroxydisulfate (PDS)) activation catalysts to degrade antibiotics. In this review, the feasibility of pristine biochar and modified biochar (non-metal heteroatom-doped biochar and metal-loaded biochar) for the removal of antibiotics in PS-AOPs is evaluated through a critical analysis of recent research. The removal performances of biochar materials, the underlying mechanisms, and active sites involved in the reactions are studied. Lastly, sustainability considerations for future biochar research, including Sustainable Development Goals, technical feasibility, toxicity assessment, economic and life cycle assessment, are discussed to promote the large-scale application of biochar/PS technology. This is in line with the global trends in ensuring sustainable production.

Enhanced chlortetracycline removal by iron oxide modified spent coffee grounds biochar and persulfate system

Chlortetracycline (CTC) is a tetracycline derivative antibiotic that has been widely used in the livestock industry for prophylactic and therapeutic purposes. Effective measures should be taken to decrease the environmental risks associated with CTC-rich waste. Biochar produced by biomass waste showed great potential for organic contaminants removal by adsorption and catalytic degradation. This study prepared iron oxide-modified coffee grounds biochar (CGF) at different temperatures for enhanced CTC removal by adsorption and degradation. The main mechanism for CTC removal was found to be electrostatic interaction. In addition, pore diffusion, hydrogen bonds, and π-π bonds also contributed to CTC adsorption. Maximum CTC adsorption capacity was 223.63 mg/g for CGF800 (CGF prepared at 800 °C pyrolysis). The free radical content of CGF600 (CFG prepared at 600 °C pyrolysis) was higher than CGF800, and there were no significant advantages in using biochar prepared at a higher temperature for persulfate activation. The ion mass-to-charge ratio (M/z) is used to describe the ratio of mass to charge of an ion or peak, which can infer compound structure. The structure of CTC degradation products was analyzed by UPLC-MS, and the M/z values were determined as 444, 273, and 154. Thus, pyrolysis of coffee grounds at higher temperatures increased CTC adsorption capacity, and CGF can indirectly assist in CTC degradation by persulfate activation.

Synthetic organic antibiotics residues as emerging contaminants waste-to-resources processing for a circular economy in China: Challenges and perspective

Synthetic antibiotics have been known for years to combat bacterial antibiotics. But their overuse and resistance have become a concern recently. The antibiotics reach the environment, including soil from the manufacturing process and undigested excretion by cattle and humans. It leads to overburden and contamination of the environment. These organic antibiotics remain in the environment for a very long period. During this period, antibiotics come in contact with various flora and fauna. The ill manufacturing practices and inadequate wastewater treatment cause a severe problem to the water bodies. After pretreatment from pharmaceutical industries, the effluents are released to the water bodies such as rivers. Even after pretreatment, effluents contain a significant number of antibiotic residues, which affect the living organisms living in the water bodies. Ultimately, river contaminated water reaches the ocean, spreading the contamination to a vast environment. This review paper discusses the impact of synthetic organic contamination on the environment and its hazardous effect on health. In addition, it analyzes and suggests the biotechnological strategies to tackle organic antibiotic residue proliferation. Moreover, the degradation of organic antibiotic residues by biocatalyst and biochar is analyzed. The circular economy approach for waste-to-resource technology for organic antibiotic residue in China is analyzed for a sustainable solution. Overall, the significant challenges related to synthetic antibiotic residues and future aspects are analyzed in this review paper.

Insight into biomass feedstock on formation of biochar-bound environmentally persistent free radicals under different pyrolysis temperatures

Environmentally persistent free radicals (EPFRs) in biochars have the ability of catalytic formation of reactive oxygen species, which may pose potential oxidative stresses to eco-environment and human health. Therefore, comprehending the formation and characteristics of EPFRs in biochars is important for their further applications. In this study, the woody lignocellulosic biomass (wood chips, pine needle and barks), non-woody lignocellulosic biomass (rice husk, corn stover, and duckweed), and non-lignocellulosic biomass (anaerobically digested sludge) were selected as biomass feedstock to prepare biochars under different pyrolysis temperatures (200–700 °C). The impact of biomass feedstock on formation of biochar-bound EPFRs was systematically compared. Elemental compositions and atomic ratios of H/C and O/C varied greatly among different biomass feedstocks and the subsequently resulting biochars. EPFRs in biochars derived from the studied lignocellulosic biomass have similar levels of spin concentrations (10¹⁸–10¹⁹ spins per g) except for lower EPFRs in biochars under 200 and 700 °C; however, sludge-based biochars, a typical non-lignocellulosic-biomass-based biochar, have much lower EPFRs (10¹⁶ spins per g) than lignocellulosic-biomass-based biochars under all the studied pyrolysis temperatures. Values of g factors ranged from 2.0025 to 2.0042 and line width was in the range of 2.15–11.3 for EPFRs in the resulting biochars. Spin concentrations of biochar-bound EPFRs increased with the increasing pyrolysis temperatures from 200 to 500 °C, and then decreased rapidly from 500 to 700 °C and oxygen-centered radicals shifted to carbon-centered radicals with the increasing pyrolysis temperatures from 200 to 700 °C for all the studied biomass feedstock. 300–500 °C was the appropriate pyrolysis temperature range for higher levels of spin concentrations of biochar-bound EPFRs. Moreover, EPFRs' concentrations had significantly positive correlation with C contents and weak or none correlation with contents of transition metals. Overall, different types of biomass feedstock have significant impact on the formation of EPFRs in the resulting biochars.

Environmentally persistent free radicals (EPFRs) in biochars have the ability of catalytic formation of reactive oxygen species, which may pose potential oxidative stresses to eco-environment and human health.

Effect of pyrolysis temperature on the activated permonosulfate degradation of antibiotics in nitrogen and sulfur-doping biochar: Key role of environmentally persistent free radicals

Because of the increasingly widespread contamination of antibiotics, the preparation of biochar by heteroatom doping to further improve the catalytic degradation efficiency of antibiotics has become a major focus of research. In this study, N-doped (NBC), S-doped (SBC), and NS-doped (NSBC) moso bamboo biochar were obtained at preparation temperatures of 300-700 °C. The concentration of environmentally persistent free radicals (EPFRs) in all biochars peaked when the preparation temperature was 500 °C: 2.45 × 10¹⁹ spins·g^-1 (BC), 9.23 × 10¹⁹ spins·g^-1 (NBC), 6.10 × 10¹⁹ spins·g^-1 (SBC), and 4.36 × 10¹⁹ spins·g^-1 (NSBC). After heteroatom doping, EPFR species were more abundant, and the distribution of three types of EPFRs (oxygen-centered (g > 2.0040), carbon-centered (g < 2.0030), and carbon-centered radicals with oxygen atom free radicals (2.0030 < g < 2.0040) varied with the preparation temperature. In the process of antibiotic degradation, both NBC and SBC increased the degradation rate of antibiotics, whereas NSBC reduced the degradation rate. Compared with the degradation rate of antibiotics of biochar (79.86%), the degradation rate of antibiotics by NBC, SBC, and NSBC via PMS activation was 92.23%, 88.86%, and 70.97% on average in 30 min, respectively. The greatest contributors to the catalytic degradation were SO₄^•-, followed by ¹O₂, •OH, and O₂^•-. EPFRs and ¹O₂ might be the main contributors to the free radical and non-free radical pathways. The enhancement of EPFRs following the N doping or S doping of biochar is the key factor underlying PMS activation. Therefore, changes in the structure of biochar can better activate PMS to produce reactive oxygen species-degrading antibiotics. The mineralization rate of antibiotics by BC, NBC, SBC, and NSBC was 42.12%, 47.06%, 44.99%, and 39.01%, respectively. This means that a small portion of the antibiotics was completely decomposed into CO₂, H₂O, and inorganic substances after degradation. Cyclic experiments showed that heteroatom-doped biochar had higher reusability, and the degradation rate decreased less than 15%.

Application of Biochar as Functional Material for Remediation of Organic Pollutants in Water: An Overview

In recent years, numerous studies have focused on the use of biochar as a biological material for environmental remediation due to its low-cost precursor (waste), low toxicity, and diversity of active sites, along with their facile tailoring techniques. Due to its versatility, biochar has been employed as an adsorbent, catalyst (for activating hydrogen peroxide, ozone, persulfate), and photocatalyst. This review aims to provide a comprehensive overview and compare the application of biochar in water remediation. First, the biochar active sites with their functions are presented. Secondly, an overview and summary of biochar performance in treating organic pollutants in different systems is depicted. Thereafter, an evaluation on performance, removal mechanism, active sites involvement, tolerance to different pH values, stability, and reusability, and an economic analysis of implementing biochar for organic pollutants decontamination in each application is presented. Finally, potential prospects to overcome the drawbacks of each application are provided.

On the Performance of a Sustainable Rice Husk Biochar for the Activation of Persulfate and the Degradation of Antibiotics

Sulfate-radical-based advanced oxidation processes are highly effective in the degradation of antibiotics in water and wastewater. The activation of sulfate radicals occurs with the use of biochar, a low-cost carbon material. In this work, the preparation of biochar from rice husk for the degradation of various antibiotics was studied, and the biochar was compared with another biochar prepared at a different pyrolysis temperature. The biochar was prepared at 700 °C under limited O2. It had a high specific surface area of 231 m2 g−1 with micropores, a point of zero charge equal to 7.4 and a high silica content. The effect of different operating conditions on the degradation of organic compounds was studied. Increases in biochar dosage and sodium persulfate concentration were found to be beneficial for the degradation. In contrast, an increase in antibiotic concentration, the complexity of the water matrix and the existence of radical scavengers all had a detrimental effect on the activity. The comparison of the results with those from a biochar prepared at a higher temperature (850 °C) revealed that the preparation conditions affect the performance. The biochar pyrolyzed at 700 °C exhibited different behavior from that prepared at 850 °C, demonstrating the importance of the preparation route. The studied reaction was surface-sensitive and followed radical and non-radical pathways. The adsorption of the organic contaminant also played a significant role. The carbon phase characteristics determined the dominant pathway, which was radical formation, in contrast with the biochar prepared at higher temperature, where the degradation followed mainly non-radical pathways.