Challenges and opportunities in bioremediation of micro-nano plastics: A review

Responses of natural plastisphere community and zooplankton to microplastic pollution: a review on novel remediation strategies

The ubiquitous presence of microplastics (MP) in different environments has been well documented. Microplastic contamination has rapidly become a serious environmental issue, threatening marine ecosystems and human health. MP has been reported to accumulate organic pollutants associated with various microbial communities. The MP hazard is specifically serious in urban lakes, near-shore beaches, and benthic sediments. To prevent the further spread of MP and mitigate the increasing level of MP contamination, along with its associated environmental and economic concerns, it is essential to address mitigation strategies and their negative impacts. Contributed by low degradability, hydrophobicity, and sorption potential, the plastic surface acts as an important substrate colonized by several microorganisms known as the plastisphere community. Adaptive responses of the plastisphere community, MP ingestion, and surface modifications by the zooplankton provide insight into novel remediation strategies based on integrated natural community-level approaches. Zooplankton studies are extensive and encompass assessments of their abundance, biomass, distribution, and DNA meta-barcoding. Additionally, zooplankton has been utilized as an indicator in various freshwater environmental policies. Overall, employing zooplankton as an indicator in environmental policies is a vital tool for assessing the health of aquatic ecosystems and can assist in guiding management and conservation efforts. This review summarizes (i) the current literature on the estimation of MP distribution in aquatic environments, (ii) the effects of MP accumulation on the environment and its inhabitants, i.e., the interactions with marine microbiota,, (iii) addresses the bioremediation strategies with an emphasis on microbial degradation, ecological functioning and adaptive responses of marine microbes and finally, (iv) the directions of further research aiming to in situ mitigation of MP pollution. Recent advancements have focused on innovative methods such as membrane bioreactors, synthetic biology, organosilane-based techniques, biofilm-mediated remediation, and nanomaterial-enabled strategies. Nano-enabled technologies show substantial potential to enhance microplastic removal efficiency. Further investigation is necessary to develop advanced treatment technologies that can enhance the removal efficiency of microplastics (MPs) in drinking water. Additionally, more research is needed to understand the toxic impacts of MPs on marine ecosystems, including coral reefs, seagrass beds, mangroves, and other important habitats.

Key adsorbents and influencing factors in the adsorption of micro- and nanoplastics: A review

Microplastics and nanoplastics (MNPs) are emerging contaminants in drinking water sources that pose serious risks to human health and ecosystems. Several removal strategies, such as adsorption, exist but present challenges for their industrial scalability. This review provides a concise overview of MNP adsorption mechanisms and highlights the limited but critical exploration of column adsorption in the literature, emphasizing its importance for large-scale applications. Special attention is given to carbon-based materials due to their cost-effectiveness, environmental friendliness and sustainability. Other adsorbents (e.g., metal-organic frameworks, clays) are also discussed for their promising performance in realistic water matrixes. To predict and optimize the efficiency of adsorbents, leading simulation models are reviewed. Taken together, this work provides a comprehensive overview of the fundamental factors, such as adsorption mechanisms, adsorbent selection and experimental conditions, to optimize MNP adsorption. By highlighting the underexplored area of column-based processes, it provides valuable information to advance adsorption as a viable industrial-scale solution for MNP contamination.

Biofilm development as a factor driving the degradation of plasticised marine microplastics

Biodegradation of microplastics facilitated by natural marine biofouling is a promising approach for ocean bioremediation. However, implementation requires a comprehensive understanding of how interactions between the marine microbiome and dominant microplastic debris types (e.g., polymer and additive combinations) can influence biofilm development and drive biodegradation. To investigate this, polystyrene (PS) and polyvinyl chloride (PVC) microplastics (< 200 µm in diameter) were prepared either without any additives (i.e., virgin) or containing 15 wt% of the plasticisers diethylhexyl phthalate (DEHP) or bisphenol A (BPA). Each polymer-plasticiser microplastic combination was exposed to environmentally relevant conditions in a simulated seawater mesocosm representative of tropical reef waters over a 21-day period to allow for natural biofilm development. Following this, microplastic degradation and the colonising bacterial biofilm was assessed as a function of time, polymer and plasticiser type using infrared, thermal, gel permeation and surface characterisation techniques, as well as 16S ribosomal RNA bacterial gene sequencing, respectively. Together, these analyses revealed time-, polymer- and plasticiser-dependent degradation, particularly of the PS-BPA microplastics. Degradation of the PS-BPA microplastics also coincided with changes in bacterial community composition and an increased total relative abundance of putative biodegradative bacteria. These findings indicate that the metabolic potential and biodegradative capability of the colonising marine biofilm can be significantly impacted by the chemical properties of the microplastic substrate, even within short timeframes.

Carbon cycle of polyhydroxyalkanoates (CCP): Biosynthesis and biodegradation

Carbon neutrality of bioactive materials is vital in promoting sustainable development for human society. Polyhydroxyalkanoates (PHAs) is a class of typical carbon-cycle bio-polyesters synthesized by microorganisms using sugars, organic acids, and even carbon dioxide. PHAs first degrade into 3-hydroxybutyrate (3HB) before further breaking down into carbon dioxide and water, aligning with carbon-neutral goals. Due to their diverse molecular structures and material properties, excellent biocompatibility, and controlled biodegradability, PHAs have found widespread applications in environmental protection and biomedicine. However, challenges persist in achieving cost-effective PHA production and reusing degradation products. Additionally, understanding the carbon pathways in PHA synthesis and degradation remains limited. In this review, we first introduce the concept of the Carbon Cycle of Polyhydroxyalkanoates (CCP) and describe the biosynthetic pathways of aromatic monomers, carbon conversion processes, and PHA degradation in compost, soil, and marine environments. This will help us fully understand the sustainable utilization value of PHA as a biomaterial. Future trends point to integrating synthetic biology with emerging technologies to produce low-cost, high-value PHAs, supporting global green and low-carbon development.

Strategies for the Remediation of Micro- and Nanoplastics from Contaminated Food and Water: Advancements and Challenges

Micro- and nanoplastic (MNP) pollution is a significant concern for ecosystems worldwide. The continuous generation and extensive utilization of synthetic plastics have led to the widespread contamination of water and food resources with MNPs. These pollutants originate from daily-use products and industrial waste. Remediation of such pollutants is essential to protect ecosystems and human health since these ubiquitous contaminants pose serious biological and environmental hazards by contaminating food chains, water sources, and the air. Various remediation techniques, including physical, chemical, sophisticated filtration, microbial bioremediation, and adsorption employing novel materials, provide encouraging avenues for tackling this worldwide issue. The biotechnological approaches stand out as effective, eco-friendly, and sustainable solutions for managing these toxic pollutants. However, the complexity of MNP pollution presents significant challenges in its management and regulation. Addressing these challenges requires cross-disciplinary research efforts to develop and implement more efficient, sustainable, eco-friendly, and scalable techniques for mitigating widespread MNP pollution. This review explores the various sources of micro- and nanoplastic contamination in water and food resources, their toxic impacts, remediation strategies-including advanced biotechnological approaches-and the challenges in treating these pollutants to alleviate their effects on ecosystems and human health.

Interventions of citizen science for mitigation and management of plastic pollution: Understanding sustainable development goals, policies, and regulations

Plastic pollution in the natural environment has been overlooked, which leads to potential risks to human health and wildlife. This paper provides an overview on citizen science approach to mitigate and manage plastic pollution in natural environments. Also, this paper highlights the importance of citizen science in raising public awareness of environmental issues and promoting sustainable practices. Case studies and different projects, such as "Plastic Pirates", "Litterati", "Trash Hunter", "International Pellat Watch", and many more projects on the role of citizen scientists are summarized, which aims to monitor and collect plastic resin pellets from different ecosystems, for example, beaches, seas, and rivers and also engage various stakeholders, for example, citizen scientists, students, academic and research organizations, non-profits, government agencies, industry, and local communities. Additionally, this paper discusses different methodologies, such as surveys and sampling approaches, using mobile apps, instruments and kits to collect information on plastic pollution. Importantly, it discusses the need for global partnerships and policies to address plastic waste management and prevent conflict. Likewise, this review emphasizes the citizen sciences and impacts of plastics on both aquatic and terrestrial ecosystems to conserve, preserve, and monitor biodiversity through citizen participation. This study also highlights the significance of community involvement, such as local, coastal, marginalized, or vulnerable communities, in environmental research and the potential benefits of citizen science programs. Overall, this paper concludes with insights into citizen science as a valuable resource tool for researchers, policymakers, and the public interested in understanding and addressing the problem of plastic pollution.

Cutting-edge developments in plastic biodegradation and upcycling via engineering approaches

The increasing use of plastics has resulted in the production of high quantities of plastic waste that pose a serious risk to the environment. The upcycling of plastics into value-added products offers a potential solution for resolving the plastics environmental crisis. Recently, various microorganisms and their enzymes have been identified for their ability to degrade plastics effectively. Furthermore, many investigations have revealed the application of plastic monomers as carbon sources for bio-upcycling to generate valuable materials such as biosurfactants, bioplastics, and biochemicals. With the advancement in the fields of synthetic biology and metabolic engineering, the construction of high-performance microbes and enzymes for plastic removal and bio-upcycling can be achieved. Plastic valorization can be optimized by improving uptake and conversion efficiency, engineering transporters and enzymes, metabolic pathway reconstruction, and also using a chemo-biological hybrid approach. This review focuses on engineering approaches for enhancing plastic removal and the methods of depolymerization and upcycling processes of various microplastics. Additionally, the major challenges and future perspectives for facilitating the development of a sustainable circular plastic economy are highlighted.

Zeolites in wastewater treatment: A comprehensive review on scientometric analysis, adsorption mechanisms, and future prospects

Zeolites possess a microporous crystalline structure, a large surface area, and a uniform pore size. Natural or synthetic zeolites are commonly utilized for adsorbing organic and inorganic compounds from wastewater because of their unique physicochemical properties and cost-effectiveness. The present review work comprehensively revealed the application of zeolites in removing a diverse range of wastewater contaminates, such as dyes, heavy metal ions, and phenolic compounds, within the framework of contemporary research. The present review work offers a summary of the existing literature about the chemical composition of zeolites and their synthesis by different methods. Subsequently, the article provides a wide range of factors to examine the adsorption mechanisms of both inorganic and organic pollutants using natural zeolites and modified zeolites. This review explores the different mechanisms through which zeolites effectively eliminate pollutants from aquatic matrices. Additionally, this review explores that the Langmuir and pseudo-second-order models are the predominant models used in investigating isothermal and kinetic adsorption and also evaluates the research gap on zeolite through scientometric analysis. The prospective efficacy of zeolite materials in future wastewater treatment may be assessed by a comparative analysis of their capacity to adsorb toxic inorganic and organic contaminates from wastewater, with other adsorbents.

Innovations in plastic remediation: Catalytic degradation and machine learning for sustainable solutions

Plastic pollution is an extreme environmental threat, necessitating novel restoration solutions. The present investigation investigates the integration of machine learning (ML) techniques with catalytic degradation processes to improve plastic waste management. Catalytic degradation is emphasized for its efficiency and selectivity, while several machine learning techniques are assessed for their capacity to enhance these processes. The review goes into ML applications for forecasting catalyst performance, determining appropriate reaction conditions, and refining catalyst design to improve overall process performance. Briefing about the reinforcement, supervised, and unsupervised learning algorithms that handle all complex data and parameters is explained. A techno-economic study is provided, evaluating these ML-driven system's performance, affordability, and environmental sustainability. The paper reviews how the novel method integrating ML with catalytic degradation for plastic cleanup might alter the process, providing new insights into scalable and sustainable solutions. This review emphasizes the usefulness of these modern strategies in tackling the urgent problem of plastic pollution by offering a comprehensive examination.

Microbiological and Physicochemical Approach in the Feeding of Superworm (Zophobas morio) with Petroleum-Derived Polymer Diets

Plastics are very versatile materials that have contributed to the development of society since the 19th century; however, their mismanagement has led to an accumulation of plastic waste in almost every ecosystem, affecting the fauna of the planet. However, recently, some studies have shown that some insects might be able to adapt, consuming a wide range of hydrocarbon base polymers. In this work, the adaptive capacity of Zophobas morio larvae when feeding on different synthetic polymers derived from petroleum was studied. Four different thirty-day larval feeding treatments were carried out with synthetic polymers, including expanded polystyrene (PS), low-density polyethylene (LDPE), polyisoprene (PI), and butyl rubber (BR); in addition, a positive control of organic diet was included. Intestinal bacteria were isolated from the treatments and identified by Sanger sequencing. To analyze the chemical composition and physical form of the frass produced, Fourier transform infrared spectroscopy (FITR) was performed, and images of the feces' surfaces were taken with scanning electron microscopy (SEM), respectively. Zophobas morio larvae were able to consume 54% of PS in 30 days, equivalent to 3.2 mg/d/larva. Nine culturable bacterial strains associated with the decomposition of synthetic polymers were identified in the intestine of the larvae. As for the physicochemical analysis of the feces, FTIR spectra showed the scission of bands corresponding to functional groups of the synthetic polymers in the comparison of the plastic diet treatments versus the feces of antibiotic-treated and plastic-fed larvae, while the comparison of spectra of the plastic and control treatments also identified differences in the absorption peaks. SEM imaging demonstrated that superworm feces differed in dependence on the substrate consumed. The findings demonstrated that Zophobas morio larvae possess a gut biological complex that allows them to feed and survive by consuming various petroleum-derived polymers.

Integrated approaches for plastic waste management

Plastic pollution is the challenging problem of the world due to usage of plastic in daily life. Plastic is essential for packaging food and other goods and utensils to avoid the risk of microbial attack. Due to its hydrophobic nature, it is used for wrapping as laminates or packaging liquid substances in pouches and sachets. The tensile strength of the plastic is more therefore it is used for manufacturing carrying bags that can bear heavy loads. Plastic is available in various forms as per the requirements in our daily life. Annually millions to trillions of polyethene carry bags are being manufactured and utilized throughout the world. The plastic requires millions of years for natural degradation. The physical and chemical processes are able to degrade plastic material at the meager level by 200 to 500 years in natural conditions. Many industries focus on recycling of plastic. Biodegradation is a comparatively slow and cheaper process that involves microbes. To dispose of plastic completely there is a need of an integrated process in which all the possible methods of disposal are involved and used sustainably so that minimum depletion occurs to the livestock and the environment. In the current review, we could try to emphasize the intricate nature of plastic polymers, pollution caused by it and possible mitigation strategies for plastic waste management.

A critical review of microplastics in aquatic ecosystems: Degradation mechanisms and removing strategies

Plastic waste discarded into aquatic environments gradually degrades into smaller fragments, known as microplastics (MPs), which range in size from 0.05 to 5 mm. The ubiquity of MPs poses a significant threat to aquatic ecosystems and, by extension, human health, as these particles are ingested by various marine organisms including zooplankton, crustaceans, and fish, eventually entering the human food chain. This contamination threatens the entire ecological balance, encompassing food safety and the health of aquatic systems. Consequently, developing effective MP removal technologies has emerged as a critical area of research. Here, we summarize the mechanisms and recently reported strategies for removing MPs from aquatic ecosystems. Strategies combining physical and chemical pretreatments with microbial degradation have shown promise in decomposing MPs. Microorganisms such as bacteria, fungi, algae, and specific enzymes are being leveraged in MP remediation efforts. Recent advancements have focused on innovative methods such as membrane bioreactors, synthetic biology, organosilane-based techniques, biofilm-mediated remediation, and nanomaterial-enabled strategies, with nano-enabled technologies demonstrating substantial potential to enhance MP removal efficiency. This review aims to stimulate further innovation in effective MP removal methods, promoting environmental and social well-being.

The power of green: Harnessing phytoremediation to combat micro/nanoplastics

Plastic pollution and its potential risks have been raising public concerns as a global environmental issue. Global plastic waste may double by 2030, posing a significant challenge to the remediation of environmental plastics. In addition to finding alternative products and managing plastic emission sources, effective removal technologies are crucial to mitigate the negative impact of plastic pollution. However, current remediation strategies, including physical, chemical, and biological measures, are unable to compete with the surging amounts of plastics entering the environment. This perspective lays out recent advances to propel both research and action. In this process, phytoaccumulation, phytostabilization, and phytofiltration can be applied to reduce the concentration of nanoplastics and submicron plastics in terrestrial, aquatic, and atmospheric environments, as well as to prevent the transport of microplastics from sources to sinks. Meanwhile, advocating for a more promising future still requires significant efforts in screening hyperaccumulators, coupling multiple measures, and recycling stabilized plastics from plants. Phytoremediation can be an excellent strategy to alleviate global micro/nanoplastic pollution because of the cost-effectiveness and environmental sustainability of green technologies.

Micro and nanoplastics pollution: Sources, distribution, uptake in plants, toxicological effects, and innovative remediation strategies for environmental sustainability

Microplastics and nanoplastics (MNPs), are minute particles resulting from plastic fragmentation, have raised concerns due to their widespread presence in the environment. This study investigates sources and distribution of MNPs and their impact on plants, elucidating the intricate mechanisms of toxicity. Through a comprehensive analysis, it reveals that these tiny plastic particles infiltrate plant tissues, disrupting vital physiological processes. Micro and nanoplastics impair root development, hinder water and nutrient uptake, photosynthesis, and induce oxidative stress and cyto-genotoxicity leading to stunted growth and diminished crop yields. Moreover, they interfere with plant-microbe interactions essential for nutrient cycling and soil health. The research also explores the translocation of these particles within plants, raising concerns about their potential entry into the food chain and subsequent human health risks. The study underscores the urgency of understanding MNPs toxicity on plants, emphasizing the need for innovative remediation strategies such as bioremediation by algae, fungi, bacteria, and plants and eco-friendly plastic alternatives. Addressing this issue is pivotal not only for environmental conservation but also for ensuring sustainable agriculture and global food security in the face of escalating plastic pollution.

Advances in plastic mycoremediation: Focus on the isoenzymes of the lignin degradation complex

This study investigates P. ostreatus and A. bisporus biodegradation capacity of low density polyethylene (LDPE) oxidised to simulate environmental weathering. Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM) were used to analyse the degradation of LDPE treated with fungal cultures. Molecular implications of LDPE degradation by P. ostreatus and A. bisporus were evaluated by Reverse transcription followed by quantitative PCR (qRT-PCR) of lac, mnp and lip genes expression. After 90 days of incubation, FT-IR analysis showed, for both fungal treatments, an increasing in the intensity of peaks related to the asymmetric C-C-O stretching (1160 to 1000 cm-1) and the -OH stretching (3700 to 3200 cm-1) due to the formation of alcohols and carboxylic acid, indicating depolymerisation of LDPE. This was confirmed by the SEM analysis, where a widespread alteration of the surface morphology was observed for treated LDPE fragments. Results revealed that the exposure of P. ostreatus to oxidised LDPE treatment led to a significant increase in the expression of the lac6, lac7, lac9, lac10 and mnp2 genes, while A. bisporus showed an over-expression in lac2 and lac12 genes. The obtained results offer new perspectives for a biotechnological use of P. ostreatus and A. bisporus for plastic bioremediation.

Polyurethane degradation by extracellular urethanase producing bacterial isolate Moraxella catarrhalis strain BMPPS3

Plastic waste has become a global issue and a threat to the ecosystem. The present study isolated polyurethane (PU) degrading bacterial species from soil dumped with plastic wastes. Four bacterial isolates, RS1, RS6, RS9 and RS13 were obtained and their ability to degrade PU in a synthetic medium with PU as a sole source of carbon was assessed individually. After thirty days of incubation, the highest PU weight loss of 67.36 ± 0.32% was recorded in the medium containing RS13 isolate. The results of FTIR revealed the occurrence of carbonyl peaks. The putative isolate RS13 confirmed with the genus Moraxella according to 16S rRNA gene sequencing and the isolate was specified as Moraxella catarrhalis strain BMPPS3. The restriction analysis of Moraxella catarrhalis strain BMPPS3 revealed that the GCAT content to 51% and 49% correspondingly. Moraxella catarrhalis strain BMPPS3 was able to colonize on PU surface and form a biofilm as revealed by SEM investigation. Fatty acids and alkanes were found to be the degradation products by GC-MS analysis. The presence of these metabolites facilitated the growth of strain RS13 and suggested that ester hydrolysis products had been mineralized into CO2 and H2O. Extracellular biosurfactant synthesis has also been found in Moraxella catarrhalis strain BMPPS13 inoculated with synthetic media and mineral salt media containing PU and glucose as carbon sources, respectively with a significant level of cell-surface hydrophobicity (32%). The production and activity of extracellular esterase showed consistent increase from day 1-15 which peaked (1.029 mM/min/mg) on day 24 significantly at P < 0.001. Crude biosurfactants were lipopeptide-based, according to the characteristic investigation. According to this study findings, Moraxella catarrhalis produces biosurfactants of the esterase, urethanase and lipase (lipopeptide) types when carbon source PU is present.

When antibiotics encounter microplastics in aquatic environments: Interaction, combined toxicity, and risk assessments

Antibiotics and microplastics (MPs), known as emerging pollutants, are bound to coexist in aquatic environments due to their widespread distribution and prolonged persistence. To date, few systematic summaries are available for the interaction between MPs and antibiotics in aquatic ecosystems, and a comprehensive reanalysis of their combined toxicity is also needed. Based on the collected published data, we have analyzed the source and distribution of MPs and antibiotics in global aquatic environments, finding their coexistence occurs in a lot of study sites. Accordingly, the presence of MPs can directly alter the environmental behavior of antibiotics. The main influencing factors of interaction between antibiotics and MPs have been summarized in terms of the characteristics of MPs and antibiotics, as well as the environmental factors. Then, we have conducted a meta-analysis to evaluate the combined toxicity of antibiotics and MPs on aquatic organisms and the related toxicity indicators, suggesting a significant adverse effect on algae, and inapparent on fish and daphnia. Finally, the environmental risk assessments for antibiotics and MPs were discussed, but unfortunately the standardized methodology for the risk assessment of MPs is still challenging, let alone assessment for their combined toxicity. This review provides insights into the interactions and environment risks of antibiotics and MPs in the aquatic environment, and suggests perspectives for future research.

Engineered biochar combined clay for microplastic biodegradation during pig manure composting

This study pursued to regulate bacterial community succession pattern and expedited biodegradation of microplastics (MP) during pig manure (PM) composting employing walnut shell biochar (WSB) and montmorillonite (M). The WSB with concentration of 0%, 2.5%, 5%, 7.5%, 10% and 12% along with 10% M participated into PM for 42 days compost to search the optimal solution. The results confirmed the most prosperous bacterial phylum consisted of Firmicutes (3.02%-91.80%), Proteobacteria (2.08%-48.54%), Chloroflexi (0-44.62%) and Bacteroidetes (0.85%-40.93%). The addition of biochar has dramatically arranged bacterial community at different stages of composting. Energy Dispersive Spectrometer (EDS) revealed that carbon element in MPs decreased since the chemical bond fracture, under the intervention of high-temperature composting and WSB, the carbon content of MPs was maximum reduced by 20.25%. Fourier transform infrared spectrum indicated that CC, C-O, C-H and -COOH abundance of MPs in 10% and 12% dose biochar addition sharply reduced, interestingly, explicating WSB and composting made MP biodegradable. This experiment possesses affirmatory practical meaning for elimination of potential hazards by composting.

Chitinases: expanding the boundaries of knowledge beyond routinized chitin degradation

Chitinases, enzymes that degrade chitin, have long been studied for their role in various biological processes. They play crucial roles in the moulting process of invertebrates, the digestion of chitinous food, and defense against chitin-bearing pathogens. Additionally, chitinases are involved in physiological functions in crustaceans, such as chitinous food digestion, moulting, and stress response. Moreover, chitinases are universally distributed in organisms from viruses to mammals and have diverse functions including tissue degradation and remodeling, nutrition uptake, pathogen invasion, and immune response regulation. The discovery of these diverse functions expands our understanding of the biological significance and potential applications of chitinases. However, recent research has shown that chitinases possess several other functions beyond just chitin degradation. Their potential as biopesticides, therapeutic agents, and tools for bioremediation underscores their significance in addressing global challenges. More importantly, we noted that they may be applied as bioweapons if ethical regulations regarding production, engineering and application are overlooked.

Biodegradation of Polyurethane by Fungi Isolated from Industrial Wastewater-A Sustainable Approach to Plastic Waste Management

Polyurethane (PU) is a type of polymer, which exists in various forms in the environment. Very few studies are available concerning the structure or enzymatic mechanism of the microbial community, which can degrade PU. Degradation of PU remains a difficult problem with respect to the environmental and biological disciplines. This study mainly focused on identifying the micro-organisms able to degrade polyurethane and confirming the degradation by performing a plate assay, Sturm test and scanning electron microscopy. Optimal culture conditions for maximum PU degradation were also analyzed through classical methods. A soil burial test was conducted by placing polyurethane films in the soil for one month, and the microbe growing on the surface of polyurethane films-with a maximum degradation of 55%-was isolated and identified as Aspergillus versicolor (ARF5). The culture medium was also optimized with different physical and chemical parameters for maximum PU degradation. The presence of CO2 as a by-product of PU biodegradation was confirmed through the Sturm test.

Freshwater plastisphere: a review on biodiversity, risks, and biodegradation potential with implications for the aquatic ecosystem health

The plastisphere, a unique microbial biofilm community colonizing plastic debris and microplastics (MPs) in aquatic environments, has attracted increasing attention owing to its ecological and public health implications. This review consolidates current state of knowledge on freshwater plastisphere, focussing on its biodiversity, community assembly, and interactions with environmental factors. Current biomolecular approaches revealed a variety of prokaryotic and eukaryotic taxa associated with plastic surfaces. Despite their ecological importance, the presence of potentially pathogenic bacteria and mobile genetic elements (i.e., antibiotic resistance genes) raises concerns for ecosystem and human health. However, the extent of these risks and their implications remain unclear. Advanced sequencing technologies are promising for elucidating the functions of plastisphere, particularly in plastic biodegradation processes. Overall, this review emphasizes the need for comprehensive studies to understand plastisphere dynamics in freshwater and to support effective management strategies to mitigate the impact of plastic pollution on freshwater resources.

A review on value-addition to plastic waste towards achieving a circular economy

Plastic and mixed plastic waste (PW) has received increased worldwide attention owing to its huge rate of production, high persistency in the environment, and unsustainable waste management practices. Therefore, sustainable PW management and upcycling approaches are imperative to achieve the objectives of the United Nations Sustainable Development Goals. Numerous recent studies have shown the application and feasibility of various PW conversion techniques to produce materials with better economic value. Within this framework, the current review provides an in-depth analysis of cutting-edge thermochemical technologies such as pyrolysis, gasification, carbonization, and photocatalysis that can be used to value plastic and mixed PW in order to produce energy and industrial chemicals. Additionally, a thorough examination of the environmental impacts of contemporary PW upcycling techniques and their commercial feasibility through life cycle assessment (LCA) and techno-economical assessment are provided in this review. Finally, this review emphasizes the opportunities and challenges accompanying with existing PW upcycling techniques and deliver recommendations for future research works.

Ecological characteristics of sugar beet plant and rhizosphere soil in response to high boron stress: A study of the remediation potential

High boron (B) stress degrades the soil environment and reduces plant productivity. Sugar beet has a high B demand and potential for remediation of B-toxic soils. However, the mechanism regarding the response of sugar beet plants and rhizosphere soil microbiome to high B stress is not clear. In the potted soil experiment, we set different soil effective B environments (0.5, 5, 10, 30, 50, and 100 mg kg-1) to study the growth status of sugar beets under different B concentrations, as well as the characteristics of soil enzyme activity and microbial community changes. The results showed that sugar beet growth was optimal at 5 mg kg-1 of B. Exceeding this concentration the tolerance index decreased. The injury threshold EC20 was reached at an available B concentration of 35.8 mg kg-1. Under the treatment of 100 mg kg-1, the B accumulation of sugar beet reached 0.22 mg plant-1, and the tolerance index was still higher than 60%, which had not yet reached the lethal concentration of sugar beet. The abundance of Acidobacteriota, Chloroflexi and Patescibacteria increased, which was beneficial to the resistance of sugar beet to high B stress. In summary, under high B stress sugar beet had strong tolerance, enhanced capacity for B uptake and enrichment, and changes in soil microbial community structure. This study provides a theoretical basis for clarifying the mechanism of sugar beet resistance to high B stress and soil remediation.

Environmental fate of microplastics in alpine and canyon-type river-cascade reservoir systems: Large-scale investigation of the Yalong River in the eastern Qinghai-Tibet Plateau

Reservoirs are regarded as potential collection sites for microplastics (MPs), and ample water resources in plateau regions provide favorable natural conditions for hydroelectric power generation. However, research on the impact of cascade reservoir construction in the plateau region on the fate of MPs within the watershed is limited. In this study, the Yalong River, an alpine canyon river in the eastern Qinghai-Tibet Plateau, was selected as the research area. This study explored the distribution of MPs at various depths in water, sediment, and riverbank soil as well as the formation of "MP communities" within the river-cascade reservoir system. Furthermore, the effects of dam construction on MPs' migration in different environments were analyzed. The results revealed that the abundance of MPs in the water and sediment within the cascade reservoir area (CRA) was significantly higher than that in the river area (RA) (P < 0.001). Additionally, the trend of increasing MPs in water with decreasing altitude was notably slower in CRA. Regarding shape, the proportion of fibers in the water within the CRA was significantly lower than that in the RA, with a smaller vertical migration rate in the water than in the sediment. The proportion of MPs < 500 μm in the water within the CRA was significantly higher than that in the RA. High-density MPs were notably deposited in the reservoir sediments. The analysis of the MP communities revealed that the construction of cascade dams led to relative geographical isolation between different sampling sites, reducing the similarity of MP communities in the CRA. This study established a theoretical foundation for understanding the impact of cascade dam construction on the fate characteristics of MPs and their potential risks in plateau areas.

Various additive release from microplastics and their toxicity in aquatic environments

Additives may be present in amounts higher than 50% within plastic objects. Additives in plastics can be gradually released from microplastics (MPs) into the aquatic environment during their aging and fragmentation because most of them do not chemically react with the polymers. Some are known to be hazardous substances, which can cause toxicity effects on organisms and pose ecological risks. In this paper, the application of functional additives in MPs and their leaching in the environment are first summarized followed by their release mechanisms including photooxidation, chemical oxidation, biochemical degradation, and physical abrasion. Important factors affecting the additive release from MPs are also reviewed. Generally, smaller particle size, light irradiation, high temperature, dissolved organic matter (DOM) existence and alkaline conditions can promote the release of chemicals from MPs. In addition, the release of additives is also influenced by the polymer's structure, electrolyte types, as well as salinity. These additives may transfer into the organisms after ingestion and disrupt various biological processes, leading to developmental malformations and toxicity in offspring. Nonetheless, challenges on the toxicity of chemicals in MPs remain hindering the risk assessment on human health from MPs in the environment. Future research is suggested to strengthen research on the leaching experiment in the actual environment, develop more techniques and analysis methods to identify leaching products, and evaluate the toxicity effects of additives from MPs based on more model organisms. The work gives a comprehensive overview of current process for MP additive release in natural waters, summarizes their toxicity effects on organisms, and provides recommendations for future research.

Microplastic removal and management strategies for wastewater treatment plants

Discharging microplastics into the environment with treated wastewater is becoming a major concern around the world. Wastewater treatment plants (WWTPs) release microplastics into terrestrial and aquatic habitats, mostly from textile, laundry, and cosmetic industries. Despite extensive research on microplastics in the environment, their removal, and WWTP management strategies, highlighting their environmental effects, little is known about microplastics' fate and behaviour during various treatment processes. Microplastics interact with treatment technologies differently due to their diverse physical and chemical characteristics, resulting in varying removal efficiency. Microplastics removed from WWTPs may accumulate in soil and harm terrestrial ecosystems. Few studies have examined the cost, energy use, and trade-offs of large-scale implementation of modern treatment methods for the removal of microplastics. To safeguard aquatic and terrestrial habitats from microplastics' contamination, focused and efficient management techniques must bridge these knowledge gaps. This review summarizes microplastic detection, collection, removal and management strategies. A compilation of treatment process studies on microplastics' removal efficiency and their destiny and transit paths shows recent improvement. Bioremediation, membrane bioreactor (MBR), electrocoagulation, sol-gel technique, flotation, enhanced filtering, and AOPs are evaluated for microplastic removal. The fate and behaviour of microplastics in WWTPs suggest they may be secondary suppliers of microplastics to receiving ecosystems. Innovative microplastic removal strategies and technologies such as nanoparticles, microorganism-based remediation, and tertiary treatment raise issues. These new WWTP technologies are examined for feasibility, limitations, and implementation issues. Pretreatment modifies microplastic size, adsorption potential, and surface morphology to remove microplastics from WWTPs. Membrane bioreactors (MBR) can remove 99.9% of microplastics more efficiently than other approaches. MBR systems require membrane cleaning and fouling control, which raises operational and capital costs. To reduce MPs, plastic alternatives and strict controls, including microplastic waste transformation, should be prioritized. Microplastics must be controlled through monitoring policy execution and awareness.

Abundance, characterization, and removal of microplastics in different technology-based sewage treatment plants discharging into the middle stretch of the Ganga River, India

Sewage treatment plants (STPs) are considered as a prominent source for releasing microplastics (MPs) into the riverine systems. Though MPs abundance and removal efficacy in different secondary treatment technique-based STPs have been extensively studied worldwide, such studies are scarce in Indian conditions. Herein, this study comprehensively assesses MPs abundance, characterization, and their removal in the selected secondary treatment technique-based STPs discharging into the middle stretch of the Ganga River in India. MPs concentration (n/L) in influent and effluent of the STPs varied between 42 ± 10 to 150 ± 19 and 3 ± 1 to 22 ± 5, respectively. Overall, the primary treatment stage was observed to remove MPs by 23-42 %, while the secondary treatment stage removed MPs by 67-90 %. Selected technique-based STPs exhibited varying MPs removal efficacies as follows: SBR (94 %), TF (90 %), AL (88 %), UASB (87 %), ASP (85 %), FAB (84 %), and Bio-tower (77 %). MPs ranging from 50 to 250 μm were the dominant sizes, with PP, PE, and PS being the prevalent polymers. The Ganga River receives about 3 × 108 MPs/day from STP effluents, and an estimated 4.5 × 107 MPs/day are released via the sludge. This comprehensive assessment of MPs abundance and removal from different technology-based Indian STPs will allow the comparison of the generated dataset with similar studies worldwide.

A comprehensive review of micro- and nano-plastics in the atmosphere: Occurrence, fate, toxicity, and strategies for risk reduction

Micro- and nano-plastics (MNPs) have received considerable attention over the past 10 years due to their environmental prevalence and potential toxic effects. With the increase in global plastic production and disposal, MNP pollution has become a topic of emerging concern. In this review, we describe MNPs in the atmospheric environment, and potential toxicological effects of exposure to MNPs. Studies have reported the occurrence of MNPs in outdoor and indoor air at concentrations ranging from 0.0065 items m-3 to 1583 items m-3. Findings have identified plastic fragments, fibers, and films in sizes predominantly <1000 μm with polyamide (PA), polyester (PES), polyethylene terephthalate (PET), polypropylene (PP), rayon, polyethylene (PE), polystyrene (PS), polyvinyl chloride (PVC), polyacrylonitrile (PAN), and ethyl vinyl acetate (EVA) as the major compounds. Exposure through indoor air and dust is an important pathway for humans. Airborne MNPs pose health risks to plants, animals, and humans. Atmospheric MNPs can enter organism bodies via inhalation and subsequent deposition in the lungs, which triggers inflammation and other adverse health effects. MNPs could be eliminated through source reduction, policy/regulation, environmental awareness and education, biodegradable materials, bioremediation, and efficient air-filtration systems. To achieve a sustainable society, it is crucial to implement effective strategies for reducing the usage of single-use plastics (SUPs). Further, governments play a pivotal role in addressing the pressing issue of MNPs pollution and must establish viable solutions to tackle this significant challenge.

Towards a Sustainable Future: Advancing an Integrated Approach for the Recycling and Valorization of Agricultural Plastics

Plastic pollution has become a pressing environmental issue. The agricultural sector, in particular, is a significant contributor to this problem, given the widespread use of plastics in farming practices and a lack of and/or use of inefficient approaches for the recycling and valorization of agricultural plastic waste. This has resulted in the accumulation of these residues in landfills and/or their improper disposal, which has exacerbated their environmental impact, leading to negative consequences on soil, water, and ecosystems. This work provides an overview on the current methodologies available to address the challenges associated with inadequate management of agricultural plastics and highlights the need for a comprehensive and systematic methodology, involving material development, polymer processing, waste collection, sorting, and valorization. It emphasizes the importance of collaboration between polymer producers, polymer manufacturers, farmers, policymakers, waste management companies, and recyclers to develop effective, technical, and economically viable recycling and valorization schemes. This paper addresses gaps and provides guidance on possible solutions, specifically polymer development, policy instruments, regulatory frameworks, collection schemes, and the technical approaches required for the adequate valorization of agricultural plastic waste. Furthermore, it highlights the associated barriers and benefits of the different presented approaches. It also aims to promote awareness on agricultural plastic waste and provide guidance on the best approaches to reduce its environmental impact.

Pharmaceutical and personal care products (PPCPs) degradation and microbial characteristics of low-temperature operation combined with constructed wetlands

Emerging contaminants (ECs), which are present in water bodies, could cause global environmental and human health problems. These contaminants originate from various sources such as hospitals, clinics, households, and industries. Additionally, they can also indirectly enter the water supply through runoff from agriculture and leachate from landfills. ECs, specifically Pharmaceutical and personal care products (PPCPs), are causing widespread concern due to their contribution to persistent water pollution. Traditional approaches often involve expensive chemicals and energy or result in the creation of by-products. This study developed a practical and environmentally-friendly method for removing PPCPs, which involved combining and integrating various techniques. To implement this method, it was necessary to establish and used a field simulator based on the real-life scenario. Based on the data analysis, the average removal rates of COD, TP, TN, and NH4+-N were 57%, 59%, 63%, and 73%, respectively. the removal rate of PPCPs by CCWs was found to be 82.7% after comparing samples that were not treated by constructed wetlands and those that were treated. Combined constructed wetlands (CCWs) were found to effectively remove PPCPs from water. This is due to the combined action of plant absorption, absorption, and biodegradation by microorganisms living in the wetlands. Interestingly, the wetland plant reed had been shown to play an important role in removing these pollutants. Microbial degradation was the most important pathway for PPCPs removal in CCWs. Carbamazepine was selected as a typical PPCP for analysis. In addition, the microbial community structure of the composite filler was also investigated. High-throughput sequencing confirmed that the dominant bacteria had good adaptability to PPCPs. This technique not only reduced the potential environmental impact but also served as a foundation for further research on the use of constructed wetlands for the treatment of PPCPs contaminated water bodies and its large-scale implementation.

A study on managing plastic waste to tackle the worldwide plastic contamination and environmental remediation

Over the past 50 years, the emergence of plastic waste as one of the most urgent environmental problems in the world has given rise to several proposals to address the rising levels of contaminants associated with plastic debris. Worldwide plastic production has increased significantly over the last 70 years, reaching a record high of 359 million tonnes in 2020. China is currently the world's largest plastic producer, with a share of 17.5%. Of the total marine waste, microplastics account for 75%, while land-based pollution accounts for responsible for 80-90%, and ocean-based pollution 10-20% only in overall pollution problems. Even at small dosages (10 μg/mL), microplastics have been found to cause toxic effects on human and animal health. This review examines the sources of microplastic contamination, the prevalent reaches of microplastics, their impacts, and the remediation methods for microplastic contamination. This review explains the relationship between the community composition and the presence of microplastic particulate matter in aquatic ecosystems. The interaction between microplastics and emerging pollutants, including heavy metals, has been linked to enhanced toxicity. The review article provided a comprehensive overview of microplastic, including its fate, environmental toxicity, and possible remediation strategies. The results of our study are of great value as they illustrate a current perspective and provide an in-depth analysis of the current status of microplastics in development, their test requirements, and remediation technologies suitable for various environments.

Unlocking secrets of microbial ecotoxicology: recent achievements and future challenges

Environmental pollution is one of the main challenges faced by humanity. By their ubiquity and vast range of metabolic capabilities, microorganisms are affected by pollution with consequences on their host organisms and on the functioning of their environment. They also play key roles in the fate of pollutants through the degradation, transformation, and transfer of organic or inorganic compounds. Thus, they are crucial for the development of nature-based solutions to reduce pollution and of bio-based solutions for environmental risk assessment of chemicals. At the intersection between microbial ecology, toxicology, and biogeochemistry, microbial ecotoxicology is a fast-expanding research area aiming to decipher the interactions between pollutants and microorganisms. This perspective paper gives an overview of the main research challenges identified by the Ecotoxicomic network within the emerging One Health framework and in the light of ongoing interest in biological approaches to environmental remediation and of the current state of the art in microbial ecology. We highlight prevailing knowledge gaps and pitfalls in exploring complex interactions among microorganisms and their environment in the context of chemical pollution and pinpoint areas of research where future efforts are needed.

Characterizing the interaction between micro(nano)plastics and simulated body fluids and their impact on human lung epithelial cells

Micro(nano)plastics are considered an emerging threat to human health because they can interact with biological systems. In fact, these materials have already been found in the human body, such as in the lungs. However, limited data are available on the behavior of these materials under biological conditions and their impact on human cells, specifically on alveolar epithelial cells. In this study, micro(nano)plastics were exposed to various simulated biological fluids (artificial lysosomal fluids and Gamble's solution) for 2-80 h. Pristine and treated plastic particles were characterized based on their surface chemistry, zeta potentials, and elemental composition. Various toxicological endpoints (mitochondrial membrane potential, lactate dehydrogenase, protein, and antioxidant levels) were examined using A549 lung carcinoma cells. The surface characteristics of the treated micro(nano)plastics and the toxicological endpoints of A549 cells were found to be influenced by the simulated biological media, specifically with high concentrations of the treated micro(nano)plastics and increasing exposure under biological conditions. Moreover, the toxicological endpoints were strongly linked to the chemistry of plastics and included multiple processes in response to the plastics; different biological pathways were obtained in artificial lysosomal fluid and Gamble's solution.

Microbial degradation and transformation of PPCPs in aquatic environment: A review

The Pharmaceuticals and Personal Care Products (PPCPs) presence at harmful levels has been identified in aquatic ecosystems all over the world. Currently, PPCPs are more common in aquatic regions and have been discovered to be extremely harmful to aquatic creatures. Waste-water treatment facilities are the primary cause of PPCPs pollution in aquatic systems due to their limited treatment as well as the following the release of PPCPs. The degree of PPCPs elimination is primarily determined by the method applied for the remediation. It must be addressed in an eco-friendly manner in order to significantly improve the environmental quality or, at the very least, to prevent the spread as well as effects of toxic pollutants. However, when compared to other methods, environmentally friendly strategies (biological methods) are less expensive and require less energy. Most biological methods under aerobic conditions have been shown to degrade PPCPs effectively. Furthermore, the scientific literature indicates that with the exception of a few extremely hydrophobic substances, biological degradation by microbes is the primary process for the majority of PPCPs compounds. Hence, this review discusses about the optimistic role of microbe concerned in the degradation or transformation of PPCPs into non/less toxic form in the polluted environment. Accordingly, more number of microbial strains has been implicated in the biodegradation/transformation of harmful PPCPs through a process termed as bioremediation and their limitations.

Microplastics in soils during the COVID-19 pandemic: Sources, migration and transformations, and remediation technologies

The COVID-19 pandemic has led to a notable upsurge of 5-10 % in global plastic production, which could have potential implications on the soil quality through increased microplastics (MPs) content. The elevated levels of MPs in the soil poses a significant threat to both the environment and human health, hence necessitating the remediation of MPs in the environment. Despite the significant attention given to MPs remediation in aqueous environments, less consideration has been given to MPs remediation in the soil. Consequently, this review highlights the major sources of MPs in the soil, their migration and transformation behaviors during the COVID-19 pandemic, and emphasizes the importance of utilizing remediation technologies such as phytoremediation, thermal treatment, microbial degradation, and photodegradation for MPs in the soil. Furthermore, this review provides a prospective outlook on potential future remediation methods for MPs in the soil. Although the COVID-19 pandemic is nearing its end, the long-term impact of MPs on the soil remains, making this review a valuable reference for the remediation of MPs in the post-pandemic soil.

Computer-aided discovery of a novel thermophilic laccase for low-density polyethylene degradation

Polyethylene (PE) and industrial dyes are recalcitrant pollutants calling for the development of sustainable solutions for their degradation. Laccases have been explored for removal of contaminants and pollutants, including dye decolorization and plastic degradation. Here, a novel thermophilic laccase from PE-degrading Lysinibaccillus fusiformis (LfLAC3) was identified through a computer-aided and activity-based screening. Biochemical studies of LfLAC3 indicated its high robustness and catalytic promiscuity. Dye decolorization experiments showed that LfLAC3 was able to degrade all the tested dyes with decolorization percentage from 39% to 70% without the use of a mediator. LfLAC3 was also demonstrated to degrade low-density polyethylene (LDPE) films after eight weeks of incubation with either crude cell lysate or purified enzyme. The formation of a variety of functional groups was detected using Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). Damage on the surfaces of PE films was observed via scanning electron microscopy (SEM). The potential catalytic mechanism of LfLAC3 was disclosed by structure and substrate-binding modes analysis. These findings demonstrated that LfLAC3 is a promiscuous enzyme that has promising potential for dye decolorization and PE degradation.

Scientometric analysis of the development of plastic packaging considering the circular economy and clean technologies: A review

Plastics are alternatives to enable the distribution of industrialized products, especially food. Packaging is versatile and of great importance for the conservation of products. However, plastic packaging impacts the environment and calls for a clean technology and circular economy approach to mitigate the damage. A scientometric analysis of the relationship between plastic packaging production and the circular economy was reviewed based on the premise that research is intrinsically linked to clean technologies. VosViewer software was used to conduct the analysis, and the revision was conducted for discussion and relationship building. We concluded that there is a gap regarding the connection between the circular economy and clean technologies with plastic packaging. The development of technologies that adapt plastic packaging to the circular economy is rarely discussed. To make plastic packaging more environmentally attractive, technologies based on eco-design are necessary to achieve an alternative scenario associated with a more sustainable circular economy.

Insights into the mechanisms involved in the fungal degradation of plastics

Fungi are considered among the most efficient microbial degraders of plastics, as they produce salient enzymes and can survive on recalcitrant compounds with limited nutrients. In recent years, studies have reported numerous species of fungi that can degrade different types of plastics, yet there remain many gaps in our understanding of the processes involved in biodegradation. In addition, many unknowns need to be resolved regarding the fungal enzymes responsible for plastic fragmentation and the regulatory mechanisms which fungi use to hydrolyse, assimilate and mineralize synthetic plastics. This review aims to detail the main methods used in plastic hydrolysis by fungi, key enzymatic and molecular mechanisms, chemical agents that enhance the enzymatic breakdown of plastics, and viable industrial applications. Considering that polymers such as lignin, bioplastics, phenolics, and other petroleum-based compounds exhibit closely related characteristics in terms of hydrophobicity and structure, and are degraded by similar fungal enzymes as plastics, we have reasoned that genes that have been reported to regulate the biodegradation of these compounds or their homologs could equally be involved in the regulation of plastic degrading enzymes in fungi. Thus, this review highlights and provides insight into some of the most likely regulatory mechanisms by which fungi degrade plastics, target enzymes, genes, and transcription factors involved in the process, as well as key limitations to industrial upscaling of plastic biodegradation and biological approaches that can be employed to overcome these challenges.

Effects of selenite on the responses of lettuce (Lactuca sativa L.) to polystyrene nano-plastic stress

Nowadays, nano-plastics are widespread in agricultural soils and could be uptaken by crops to cause an increased risk for food safety. As a beneficial element for plants, selenium (Se) can alleviate oxidative damages under various environmental stresses (eg. heavy metals, heat, cold). This study investigated the single and co-applications of nano-size polystyrene (PS) (80 nm and 200 nm) and selenite (0.8 ppm and 5 ppm) in lettuce (Lactuca sativa L.). Results showed nano-PS significantly decreased the root-shoot fresh biomass ratios, inhibited physiological functions in roots and leaves (e.g. root length, chlorophyll content and net photosynthetic rate), as well as stimulated the activities of the antioxidant enzymes in roots and shoots with greater toxicity at the smaller particle size (80 nm). However, both exogenous selenite applications significantly alleviated the above toxic effects of nano-PS in lettuces, especially at a high Se level of 5 ppm. Regression Path Analysis (RPA) revealed that regulation of chlorophyll levels by Se might be a key mechanism for counteracting PS stress in lettuces, which led to the increase in indigenous defense capacity. The present findings provide a novel but safer and cleaner agricultural strategy to alleviate or minimize nano-plastics toxicity in agricultural soils for staple crops and vegetables via application of Se.

Contemporary Drift in Emerging Micro(nano)plastics Removal and Upcycling Technologies from Municipal Wastewater Sludge: Strategic Innovations and Prospects

Purpose of Review

Annually, huge amounts of microplastics (MPs) are added to farmlands through sewage sludge (SS)/biosolid applications as a fertilizer. Most research emphasizes the enormity of the problem and demonstrates the fate, impacts, and toxicity of MPs during SS treatment processes and land applications. None has addressed the management strategies. To address the gaps, the current review evaluates the performance analysis of conventional and advanced sludge treatment methods in eliminating MPs from sludge.

Recent Findings

The review uncovers that the occurrence and characteristics of MPs in SS are highly governed by factors such as population density, speed and level of urbanization, citizens' daily habits, and treatment units in wastewater treatment plants (WWTPs). Furthermore, conventional sludge treatment processes are ineffective in eliminating MPs from SS and are accountable for the increased small-sized MPs or micro(nano)plastics (MNPs) along with altered surface morphology facilitating more co-contaminant adsorption. Simultaneously, MPs can influence the operation of these treatment processes depending on their size, type, shape, and concentration. The review reveals that research to develop advanced technology to remove MPs efficiently from SS is still at a nascent stage.

Summary

This review provides a comprehensive analysis of MPs in the SS, by corroborating state-of-the-knowledge, on different aspects, including the global occurrence of MPs in WWTP sludge, impacts of different conventional sludge treatment processes on MPs and vice versa, and efficiency of advanced sludge treatment and upcycling technologies to eliminate MPs, which will facilitate the development of mitigation measures from the systematic and holistic level.

Graphical Abstract

A first report on the spatial and temporal variability of microplastics in coastal soils of an urban town in south-western India: Pre- and post-COVID scenario

We present a first study on the temporal changes (2019-2021) in the microplastic abundance in the coastal soils of an urban town in the south-western part of India. All sampling stations exhibited higher abundances of microplastics in soils collected during 2021 (959.7 ± 277.7 particles/kg) compared to those collected in 2019 (515.1 ± 182.7 particles/kg). Morphologically, flakes, fibres, and films are the most abundant types documented in the soil environment. The microplastics of 0.3-5 mm size are relatively more abundant (60.6 %) compared to those of 0.03-0.3 mm size (39.4 %) in 2021. The three main types of polymers (polypropylene and high- and low-density polyethylene) in the soil exhibited an increase in abundance during an interval of 15 months (October 2019 to March 2021). In addition to packaging materials, the enhanced use of surgical masks during the COVID-19 period might have acted as a source of microplastic contamination in the soils.

Hormesis-tempting stressors driven by evolutionary factors for mitigating negative impacts instigated over extended exposure to chemical elements

The adaptive responses to moderate environmental challenges by the biological systems have usually been credited to hormesis. Since the hormetic biphasic dose-response illustrates a prominent pattern towards biological responsiveness, the studies concerning such aspects will get much more significance in risk assessment practices and toxicological evaluation research. From this point of view, the past few epochs have witnessed the extending recognition of the notion concerning hormesis. The extraction of its basic foundations of evolutionary perspectives-along with the probable underlying molecular and cellular mechanisms followed by the practical implications to enhance the quality of life. To get better and more effective output in this regard, the present article has evaluated the various observations of previous investigations. The intent of integrating the novel inferences concerning the hormesis-tempting stressors driven by predominant evolutionary factors for mitigating the adverse impacts that were prompted over frequent and continuous exposure to the various chemical elements. Such inferences can offer extensive insight into the implications concerning the risk assessment of hormesis.

Aerobic biodegradation of untreated polyester-polyether urethanes by newly isolated yeast strains Exophilia sp. NS-7 and Rhodotorula sp. NS-12

Polyester-urethanes as the most widely used polyurethanes (PUs) are among the most recalcitrant plastics in natural conditions. Among existing approaches for managing and reducing plastic waste, biodegradation as a promising approach to reduce plastic waste pollution has drawn scientific society's attention in recent years. In this study, two polyester-polyether urethane degrading yeasts were isolated and identified as two new strains of Exophilia sp. NS-7 and Rhodotorula sp. NS-12. The results showed that Exophilia sp. NS-7 is esterase, protease, and urease positive, and Rhodotorula sp. NS-12 can produce esterase and urease. Both strains can degrade Impranil^® as the sole carbon source with the highest growth rate in 4-6 and 8-12 days, respectively. SEM micrograph revealed PU degradation ability in both strains by showing so many pits and holes in treated films. The Sturm test showed that these two isolates can mineralize PU to CO₂, and significant decreases in N-H stretching, C-H stretching, C=O stretching, and N-H/C=O bending absorption in the molecular structure of PU were revealed by the FT-IR spectrum. The detection of the deshielding effect in chemical shifts of the H-NMR spectrum after the treatment also confirmed the destructive effects of both strains on PU films.

Review on distribution, fate, and management of potentially toxic elements in incinerated medical wastes

Medical wastes include all solid and liquid wastes that are produced during the treatment, diagnosis, and immunisation of animals and humans. A significant proportion of medical waste is infectious, hazardous, radioactive, and contains potentially toxic elements (PTEs) (i.e., heavy metal (loids)). PTEs, including arsenic (As), cadmium (Cd), lead (Pb) and mercury (Hg), are mostly present in plastic, syringes, rubber, adhesive plaster, battery wastes of medical facilities in elemental form, as well as oxides, chlorides, and sulfates. Incineration and sterilisation are the most common technologies adopted for the safe management and disposal of medical wastes, which are primarily aimed at eliminating deadly pathogens. The ash materials derived from the incineration of hazardous medical wastes are generally disposed of in landfills after the solidification/stabilisation (S/S) process. In contrast, the ash materials derived from nonhazardous wastes are applied to the soil as a source of nutrients and soil amendment. The release of PTEs from medical waste ash material from landfill sites and soil application can result in ecotoxicity. The present study is a review paper that aims to critically review the dynamisms of PTEs in various environmental media after medical waste disposal, the environmental and health implications of their poor management, and the common misconceptions regarding medical waste.

Remediation plan of nano/microplastic toxicity in food

Microplastic pollution is causing a stir globally due to its persistent and ubiquitous nature. The scientific collaboration is diligently working on improved, effective, sustainable, and cleaner measures to control the nano/microplastic load in the environment especially wrecking the aquatic habitat. This chapter discusses the challenges encountered in nano/microplastic control and improved technologies like density separation, continuous flow centrifugation, oil extraction protocol, electrostatic separation to extract and quantify the same. Although it is still in the early stages of research, biobased control measures, like meal worms and microbes to degrade microplastics in the environment have been proven effective. Besides the control measures, practical alternatives to microplastics can be developed like core-shell powder, mineral powder, and biobased food packaging systems like edible films and coatings developed using various nanotechnological tools. Lastly, the existing and ideal stage of global regulations is compared, and key research areas are pinpointed. This holistic coverage would enable manufacturers and consumers to reconsider their production and purchase decisions for sustainable development goals.

Current research trends on cosmetic microplastic pollution and its impacts on the ecosystem: A review

Since the advent of microplastics, it has become a vital component, directly or indirectly, in our daily lives. With advancements in their use, microplastics have become an integral part of personal care, cosmetics, and cleaning products (PCCPs) and emerged as a domestic source of environmental pollution. Over the years, researchers have ascertained the harmful effects of microplastics on the environment. In this context, the assessment and monitoring of microplastics in PCCPs require considerable attention. In addition, it raises concern regarding the need to develop innovative, sustainable, and environmentally safe technologies to combat microplastic pollution. Therefore, this review is an endeavor to uncover the fate, route and degradation mechanism of cosmetic microplastics. In addition, the major technological advancement in cosmetic microplastic removal and the steps directed toward mitigating cosmetic microplastic pollution are also discussed.

Eco-toxicity of nano-plastics and its implication on human metabolism: Current and future perspective

In the current scenario, plastic pollution has become one of the serious environmental hazard problems due to its improper handling and insufficiency in degradation. Nanoplastics (NPs) are formed when plastic fragments are subjected to ultraviolet radiation, natural weathering, and biodegradation. This review paper focuses on the source of origin, bioaccumulation, potential nanoplastics toxicity impact towards environment and human system and management strategies towards plastic pollution. Moreover, this study demonstrates that nanoplastics interfere with metabolic pathways and cause organ dysfunction. A wide range of studies have documented the alteration of organism physiology and behavior, caused by NPs exposure. A major source of NPs exposure is via ingestion because these plastics are found in foods or food packaging, however, they can also enter the human body via inhalation but in a less well-defined form. In recent literature, the studies demonstrate the mechanisms for NP uptake, affecting factors that have been discussed followed by cytotoxic mechanisms of NPs. However, study on challenges regarding NPs toxicity for the risk assessment of human health is limited. It is important to perform and focus more on the possible impacts of NPs on human health to identify the key challenges and explore the potential impacts of their environmental accumulation and its toxicity impacts.

Microbial Enzyme Biotechnology to Reach Plastic Waste Circularity: Current Status, Problems and Perspectives

The accumulation of synthetic plastic waste in the environment has become a global concern. Microbial enzymes (purified or as whole-cell biocatalysts) represent emerging biotechnological tools for waste circularity; they can depolymerize materials into reusable building blocks, but their contribution must be considered within the context of present waste management practices. This review reports on the prospective of biotechnological tools for plastic bio-recycling within the framework of plastic waste management in Europe. Available biotechnology tools can support polyethylene terephthalate (PET) recycling. However, PET represents only ≈7% of unrecycled plastic waste. Polyurethanes, the principal unrecycled waste fraction, together with other thermosets and more recalcitrant thermoplastics (e.g., polyolefins) are the next plausible target for enzyme-based depolymerization, even if this process is currently effective only on ideal polyester-based polymers. To extend the contribution of biotechnology to plastic circularity, optimization of collection and sorting systems should be considered to feed chemoenzymatic technologies for the treatment of more recalcitrant and mixed polymers. In addition, new bio-based technologies with a lower environmental impact in comparison with the present approaches should be developed to depolymerize (available or new) plastic materials, that should be designed for the required durability and for being susceptible to the action of enzymes.

Current research trends on emerging contaminants pharmaceutical and personal care products (PPCPs): A comprehensive review

Pharmaceutical and personnel care products (PPCPs) from wastewater are a potential hazard to the human health and wildlife, and their occurrence in wastewater has caught the concern of researchers recently. To deal with PPCPs, various treatment technologies have been evolved such as physical, biological, and chemical methods. Nevertheless, modern and efficient techniques such as advance oxidation processes (AOPs) demand expensive chemicals and energy, which ultimately leads to a high treatment cost. Therefore, integration of chemical techniques with biological processes has been recently suggested to decrease the expenses. Furthermore, combining ozonation with activated carbon (AC) can significantly enhance the removal efficiency. There are some other emerging technologies of lower operational cost like photo-Fenton method and solar radiation-based methods as well as constructed wetland, which are promising. However, feasibility and practicality in pilot-scale have not been estimated for most of these advanced treatment technologies. In this context, the present review work explores the treatment of emerging PPCPs in wastewater, via available conventional, non-conventional, and integrated technologies. Furthermore, this work focused on the state-of-art technologies via an extensive literature search, highlights the limitations and challenges of the prevailing commercial technologies. Finally, this work provides a brief discussion and offers future research directions on technologies needed for treatment of wastewater containing PPCPs, accompanied by techno-economic feasibility assessment.

Micro and nanoplastics ravaging our agroecosystem: A review of occurrence, fate, ecological impacts, detection, remediation, and prospects

Micro-and nanoplastics (MNPs) are particles that are smaller than a millimeter in size and have infiltrated both terrestrial and aquatic ecosystems. MNPs pollution have become a widespread problem causing severe adverse effects on human health and the environment worldwide. Once in the environment, these polymers are not easily degradable due to their recalcitrant nature and small size and are easily consumed by aquatic organisms and transported through the food chain, at great risk to human health. Substantial evidence demonstrates the negative effects of MNPs residues on aquatic organisms' reproductive and developmental defects. Similarly, soil flora, soil quality, and plant height have been severely impacted by their presence in the agroecosystem. This is evident in the inhibition of water absorption by blocked seed pores, delayed germination, and the dramatic decline in transpiration rates and growth of plant roots, inevitably leading to drop in biomass and crop production, posing an overall threat to global food security. In this review, we present the impact of MNPs in agroecosystems around the globe, including their sources, occurrence, distribution, transport, and ultimate fate. We recommend using bio-based plastics, eco-friendly remediation strategies, reformed agricultural practices, non-single-use synthetic plastic legislation, and increased plastic waste disposal awareness campaigns as effective tools to mitigate this problem.