Fate of microplastics in deep-sea sediments and its influencing factors: Evidence from the Eastern Indian Ocean

Aging characteristics of polylatic acid microplastics and their adsorption on hydrophilic organic pollutants: mechanistic investigations and theoretical calculations

The extended persistence of microplastics (MPs) in aquatic habitats can result in the uptake and accumulation of various pollutants, thereby creating a serious risk to the ecosystem. The research explored how various weathering environments affect the physicochemical traits of polylactic acid (PLA) MPs and their capacity to adsorb common hydrophilic organic contaminants, such as benzoic acid (BA), sulfamethoxazole (SMZ), and sulfamethazine (SMR). The results showed that the ability to adsorb was affected by pH and was dependent on the pHPZC of PLA as well as the pKa values of the contaminants. Calculated DFT results were consistent with the actual adsorption capacity of PLA (SMX > BA > SMR). The main adsorption mechanisms included hydrophobic interaction, hydrogen bonding, and electrostatic attraction, with hydrophobicity predominating. Additionally, charge-assisted hydrogen bond (CAHB) and partition effect enhanced adsorption under specific conditions. Compared to virgin PLA, the adsorption capacity of aged PLA for hydrophilic organic pollutants generally improved, with APLA showing the most increase. The impact of oxygen concentration, surface area, and crystallinity on the adsorption ability of MPs was minimal, whereas surface charge became the primary physicochemical factor influencing the adsorption performance of aged PLA. This study would provide important theoretical references and data to deepen the understanding of the environmental behavior of PLA and its potential environmental risks.

Microplastic contamination in deep-sea sediments and polymetallic nodules: Insights from the Clarion-Clipperton Zone, Pacific Ocean

This study investigates MPs in sediments and polymetallic nodules collected from the Clarion Clipperton Zone (CCZ) in the Pacific Ocean, using samples collected during a deep-sea mining exploration. MPs were detected in over half of the sediment samples and a third of the nodule samples, with an abundance ranging from 0 to 480 items/kg dry weight (d.w.) and 0 to 80 items/kg d.w. for sediments and nodules, respectively, with no significant difference between the two matrices. In terms of size, the smallest particle found was 0.165 mm in sediments and the largest 10 mm in nodules, being >40 % of the particles counted <1 mm, with fibers being the predominant morphology for both matrices. Transparent and blue particles presented the highest percentages, whereas nodules displayed a more balanced percentage distribution among the observed colors. Raman spectroscopy analysis identified polyacrylonitrile (PAN) and polyethylene terephthalate (PET) as the most abundant polymers, along with pigments like indigo blue (IB), acetoacetic arylide (PY), and phthalocyanine blue (PB) commonly associated with synthetic textiles and industrial sources. A global review of deep-sea MPs (>1000 m) reveals considerable variability in reported concentrations, underscoring the challenge of assessing MP pollution in remote marine environments. The findings highlight the need for standardized methodologies to improve comparability across studies and enhance understanding of MP distribution in deep-sea ecosystems. Given the CCZ's ecological and economic significance, further research is crucial to assess the potential risks posed by MPs in this region.

Unveiling the deep-sea microplastic Odyssey: Characteristics, distribution, and ecological implications in Pacific Ocean sediments

Microplastics (MPs) in deep-sea environments are a growing concern due to their potential ecological risks and the deep sea's role in global biogeochemical cycles. This study investigated the characteristics and distribution of MPs in sediments from the Pacific Ocean at depths of 4900-7016 m across three regions: Western Pacific (WP), Central Pacific (CP), and Eastern Pacific (EP). MPs were detected at all sampling sites, with the highest abundance in WP (111.3 ± 75.1 items/kg dw) and the lowest in CP (49.4 ± 18.7 items/kg dw). Site S9 was recorded as the peak abundance (270.1 ± 107.4 items/kg dw) in WP. MPs were predominantly fibers (94.8 %) in black, gray, and blue hues, mainly composed of polyester and rayon. Statistical analysis showed significant regional variations, reflecting anthropogenic impacts and complex deposition mechanisms. Risk assessments indicated low to medium hazard levels (PLI <10, PRI ≤ III), but the potential ecological impacts remain concerning. This study highlights the significant variability in MP distribution across regions, emphasizing the importance of region-specific mitigation strategies. It calls for comprehensive, long-term research to better understand MP sources, deposition processes, and ecological impacts in deep-sea ecosystems.

Integrated analysis of microplastics origins and impact on prominent aquaculture ecosystems in Bangladesh

Microplastics (MPs) have become a pressing environmental challenge in aquaculture-farmed ponds, particularly in Bangladesh, where research on their prevalence and impact is sparse. This research systematically investigates the distribution, abundance, and features of MPs in water and fish from aquaculture ponds in the western region of Bangladesh. The study reveals that MPs were widespread in water samples, with quantities ranging from 0.095 to 0.36 items/L, predominantly fibers accounted for 60.86 % of the total, followed by 26.08 % fragments, 11.30 % lines, and 1.76 % pellets. Fish samples demonstrated an average MP concentration of 1.19 items/g (23.37 items/individual), in fish gill ranging from 1.05 to 5.04 items/g and in GIT 0.40 to 2.26 items/g across eleven species, predominantly fibers with a 100 % detection rate, showing variability in MP concentration based on tissue type, species, and feeding habits. Fourier transform infrared spectroscopy (FT-IR) was employed to analyze the polymer composition, revealing significant proportions of SSP (W-43.17 %, F-35.22 %), PE (W-5.06 %, F-23.14 %), PP (W-5.57 %, F-8.19 %), nylon (W-15.76 %, F-14.84 %), PVC (W-7.16 %, F-3.58 %), and acrylic (W-5.57 %, F-4.93 %). Strong correlations were found between fish size and MP abundance, indicating that pond environmental contamination is a significant factor in MP ingestion. Pollution risk assessment revealed high contamination MP levels in both water and fish. Among the probable sources, MPs contributions are from agricultural runoff, tires of vehicles (each 14.11 %), fishing nets, fish feed, household wastage, plastic-made feeding equipment, laundry wastage (each 11.76 %), and so on. The research underscores the need for further research on MP exposure to human health and sustainable aquaculture production practices.

Microplastic contamination in sediments: Analytical techniques and case-based evaluations

Microplastics (MPs) pollution in sediments has gained critical attention due to its pervasive presence and potential ecological risks. This review synthesizes the latest advancements in analytical techniques, providing a comprehensive overview of separation and identification methods tailored to complex sedimentary matrices. Density-based approaches, such as ZnCl2 or NaI solutions, and enzymatic digestions are increasingly refined to isolate MPs of varying sizes, yet discrepancies in mesh sizes, reagent concentrations, and digestion protocols continue to complicate cross-study comparisons. Meanwhile, cutting-edge spectroscopic tools-μFTIR, Raman imaging, thermal analyses-have greatly enhanced polymer identification down to the tens-of-micrometers scale. Case studies spanning urban estuaries to remote deep-sea basins underscore the pervasive nature of MPs worldwide, with fibers and fragments frequently dominating sediment samples. Factors such as polymer density, hydrodynamics, and biofouling contribute to the diverse distribution patterns, revealing that even ostensibly pristine environments are not exempt from contamination. Although the precise ecological and toxicological consequences of long-term sediment-bound MPs remain partly unclear, growing evidence points to intricate interactions with co-occurring contaminants and potential trophic transfer. To address these knowledge gaps, this review emphasizes the urgent need for methodological standardization and collaborative initiatives, particularly for emerging challenges like nanoplastic detection. By integrating robust sampling approaches, advanced analytical tools, and interdisciplinary research, scientists and policymakers can more accurately map and mitigate the impacts of sediment-associated MPs on aquatic ecosystems.

Fate, source, and ecological risk of microplastic in the surface sediment of the Beibu Gulf, the Northern South China sea

A large-scale investigation of the surface sediments in the Beibu Gulf was conducted in this study to reveal the contamination characteristics of microplastics in the surface sediments of the Beibu Gulf. The results showed that the abundance of microplastics ranged from 12.91 to 251.69 items/kg, dry weigh (DW), with an average abundance of 84.34 ± 51.85 items/kg (DW). The highest abundance of microplastics was found in the estuary of northwestern Hainan, influenced by the West Guangdong Coastal Current. The overall distribution of abundance showed a decreasing trend from nearshore to offshore. Microplastics in the surface sediments were predominantly in the form of fiber (87.51%), with a predominant white color. The polymer of microplastics in surface sediment was primarily polyester (43.43%). The main sources of microplastics include household items, textile products, food packaging, fishing activities, industrial activities, sewage discharges, and biochemical materials, of which household products and textile products are the most important sources. The results of the risk evaluation showed that the sediment of Beibu Gulf was contaminated with microplastics (pollution load index >1) and the polymer risk was at low to extremely high levels. The high abundance of microplastics and highly toxic polymers resulted in increased ecological risk. These findings highlight the urgent need to implement timely and effective measures to reduce the impact of intensive human activities on microplastic pollution. At the same time, the study data provide an important reference for future ecotoxicological investigations, pollution management strategies and microplastic policy development.

Necroecological Trophic Transfer of Microplastics: Insights into the Ecotoxicity of Petroleum-Derived and Biodegradable Polymers

Although the toxicity of petroleum-derived microplastics (MPs) has been widely investigated, the impact of biomicroplastics (BioMPs) remains controversial, and the necroecological trophic transfer of both is still poorly understood. Our study reveals that biomicroplastics may pose ecotoxicological risks comparable to or greater than those of petroleum-derived plastics, a finding that should raise concern. We aimed to evaluate the possible translocation of polystyrene (PS) and polylactic acid (PLA) MPs from mice to the necrophagous fly Synthesiomyia nudiseta and their potential effects on the larval stage. Mice were inoculated intraperitoneally with different doses of MPs [9 (I) and 90 mg/kg (II)] and subjected to the decomposition process (for ten days), allowing colonization by larvae. Our results confirmed the translocation of MPs from mice to S. nudiseta larvae, resulting in a greater accumulation of PLA-MPs compared to PS-MPs. We observed that exposure to MPs significantly influenced biomass accumulation, with larvae from the PS-I and PLA-I groups showing increased biomass. In contrast, those from the PLA-II group exhibited lower biomass. AChE activity was modulated in a concentration-dependent manner, with an increase observed in larvae exposed to PLA-MPs, indicating a potential neurotoxic effect. In addition, there was an increased production of reactive oxygen species (ROS), especially in the groups exposed to higher concentrations of MPs, without a proportional response of antioxidant enzymes, suggesting a redox imbalance and oxidative stress. The elevated serotonin levels and reduced dopamine observed in larvae exposed to MPs indicate a possible redirection of energy resources and changes related to a metabolic adaptation to the stress imposed by MPs. Principal component analysis (PCA) showed that PC1 was strongly influenced by biomarkers such as trypsin, chymotrypsin, AChE, ROS, and dopamine activity, highlighting that PLA-MPs (at the highest concentration) induced more pronounced toxic effects than PS-MPs. This finding was corroborated by discriminant analysis, which revealed a clear separation between the experimental groups, and by multiple regression analysis, which confirmed a strong relationship between MP concentration and larval biomarker responses, indicating that the type and concentration of MPs explained approximately 65% ​​of the variation in the biomarkers evaluated. In conclusion, our study demonstrates for the first time the necroecological trophic translocation of MPs between vertebrates and invertebrates, highlighting the potential risks of biomicroplastics.

Microplastic pollution in the marine environment: Distribution factors and mitigation strategies in different oceans

As the COVID-19 pandemic began in 2020, plastic usage spiked, and microplastic (MP) generation has increased dramatically. It is documented that MP can transfer from the source to the ocean environment where they accumulate as the destination. Therefore, it is essential to understand their transferring pathways and effective environmental factors to determine the distribution of MPs in the marine environment. This article reviews the environmental factors that affect MP distribution in the oceans including abiotic such as ocean currents and wind direction, physical/chemical and biological reactions of MPs, natural sinking, particle size and settling velocity, and biotic including biofouling, and incorporation in fecal material. It was found that velocity and physical shearing are the most important parameters for MP accumulation in the deep ocean. Besides, this review proposes different research-based, national-level, and global-level strategies for the mitigation of MPs after the pandemic. Based on the findings, the level of MP pollution in the oceans is directly correlated to coastal areas with high populations, particularly in African and Asian countries. Future studies should focus on establishing predictive models based on the movement and distribution of MPs to mitigate the levels of pollution.

Field evidence and modeling validation of biogeochemical controls on the deposition of persistent organic pollutants in the deep ocean

Deposition in the deep ocean plays a crucial role in the global sink of persistent organic pollutants (POPs), yet observation-based assessments of their biogeochemical cycling are scarce. In this study, surface sediments were collected from deep sea of the Eastern Indian Ocean (2161-4545 m) and analyzed for organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs). Long-range atmospheric transport was identified as the dominant pathway for OCPs (36.7-762.0 pg/g) and PCBs (25.5-110.0 pg/g) to reach the basin area from surrounding agricultural, manufacturing, and combustion emissions. Besides the TOC-dependent deposition, unique hydrodynamic conditions in the mid-ocean ridge might influence the transport and accumulation of POPs by altering their resuspension and repartitioning processes. Results of the machine learning analysis suggested that logKOW, TOC content, and pollutant residence time in the ocean are important parameters in determining PCB concentrations in the Indian Ocean. Additionally, concentrations of POPs generally exhibited logarithmic relationships with microplastic abundances, indicating that microplastics act as potential carriers for transporting these pollutants to deep-sea sediments. This study revealed the biogeochemical controls on the deposition of OCPs and PCBs in the Indian Ocean by combining field observation and model simulation. Given the rapid rate of surface warming and various biogeochemical responses in the Indian Ocean, it is recommended to conduct long-term, high-resolution field observations to understand the dynamic fate of POPs in these changing ocean environments.

Microfibre pollution: An emerging contaminant, alarming threat to the global environment

Microfibres, mostly obtained from home laundry, textiles, industrial materials, sewage effluents, and sludge, are considered the main source of environmental pollution, which has become a prevalent threat to terrestrial and aquatic creatures. Global population growth and industrialization have led to a rise in fibre consumption and production, which spread its network in drinking water, beer, and seafood. Focusing on the alarming threat of microfibre towards the natural environment, we have penned an extensive review article about microfibre pollution. The manuscript is divided into various subparts, such as the introductory portion, which briefly summarizes the sources and presence of various hazardous pollutants in the environment, followed by a detailed discussion about microfibre. The second part elaborates on the sources and distribution of microfibreous pollutants and the third portion discloses the toxic chemicals utilized or produced from functionalization, as well as the negative implications of microfibre on the environment. The fourth part discloses the leading application strategies to diminish microfibre pollution by controlling the sources and the development of various remediations. The last portion deals with the future and critical aspects of microfibre contamination. The authors hope this review article will boost its domain in environmental chemistry, sustainable development and environmental engineering from academic to industrial level as it helps researchers in particular and academics in general.

Polystyrene microplastics exposure: Disruption of intestinal barrier integrity and hepatic function in infant mice

The pervasive presence of microplastics (MPs) in infant formula and care products has emerged as a significant and underappreciated risk to public health. Notably, infants are at an elevated risk due to their underdeveloped intestinal defenses and liver detoxification capabilities, factors that could heighten their vulnerability to MPs. This study presents a comprehensive evaluation of the health implications linked to polystyrene microplastics (PSMPs) exposure during early life, examining both environmentally plausible and elevated levels. Based on histological analysis, in vivo imaging analysis, biochemical analysis and 16S rRNA sequencing results, our study found that oral PSMPs exposure in infant mice led to profound toxicological consequences, such as intestinal barrier impairment and hepatic injury, in a dose-dependent manner. Strikingly, even low ambient concentration of PSMPs (20 ppb) was sufficient to inflict considerable harm, disrupting the intestinal barrier, manifested that lessened mucus secretion, elevated iFABP level (276.50±10.73 pg/mL), decreased sIgA levels (0.60±0.03 mg/g), and pathological damage of intestinal tissues, allowing PSMPs accumulation and leakage into blood, inducing hepatotoxicity, such as increased TG levels (0.99±0.05 mmol/gprot) and lipid droplet accumulation. Furthermore, PSMPs exposure gives rise to aberrant bacterial colonization, dropping the abundance of probiotics as well as altering the abundance of pathogenic bacteria, which may contribute to the toxicity outcomes. The study underscores the critical need for vigilance regarding the insidious effects of PSMPs at environmental-relevant concentrations, especially in the context of infant exposure.

Microplastics in ecosystems: Critical review of occurrence, distribution, toxicity, fate, transport, and advances in experimental and computational studies in surface and subsurface water

Microplastics (MPs), particles under 5 mm, pervade water, soil, sediment, and air due to increased plastic production and improper disposal, posing global environmental and health risks. Examining their distribution, quantities, fate, and transport is crucial for effective management. Several studies have explored MPs' sources, distribution, transport, and biological impacts, primarily focusing on the marine environment. However, there is a need for a comprehensive review of all environmental systems together for enhanced pollution control. This review critically examines the occurrence, distribution, fate, and transport of MPs in the following environments: freshwater, marine, and terrestrial ecosystems. The concentration of MPs is highly variable in the environment, ranging from negligible to significant amounts (0.003-519.223 items/liter in water and 0-18,000 items/kg dry weight sediment, respectively). Predominantly, these MPs manifest as fibers and fragments, with primary polymer types including polypropylene, polystyrene, polyethylene, and polyethylene terephthalate. A complex interplay of natural and anthropogenic actions, including wastewater treatment plant discharges, precipitation, stormwater runoff, inadequate plastic waste management, and biosolid applications, influences MPs' presence and distribution. Our critical synthesis of existing literature underscores the significance of factors such as wind, water flow rates, settling velocities, wave characteristics, plastic morphology, density, and size in determining MPs' transport dynamics in surface and subsurface waters. Furthermore, this review identifies research gaps, both in experimental and simulation, and outlines pivotal avenues for future exploration in the realm of MPs.

Occurrence and risk assessment of microplastics on the Shenzhen coast, South China

Microplastics (MPs) have attracted increasing attention worldwide owing to their widespread presence and potential risks to terrestrial and marine ecosystems. Estimating the pollution status and risk levels of MPs in coastal ecosystems is necessary; however, these are poorly understood in coastal megacities. Here, the abundance and characteristics of MPs in seawater, marine sediment, marine organisms, and beaches in the Shenzhen coastal ecosystems and land sources (river and sewage outfall) were simultaneously investigated, and the annual MPs load of rivers and MP-induced ecological risks were evaluated. The results showed that MPs pollution was prevalent in Shenzhen coastal ecosystems, with the average abundances of 2.40 ± 2.48 items/m3, 404.21 ± 431.48 items/kg, 1.66 ± 1.96 items/individual, and 1648.99 ± 1908.19 items/kg in seawater, marine sediment, marine organisms, and beach sands, respectively. The detected MPs were predominantly fibrous/granular, transparent/white, < 1 mm in size, and polyethylene terephthalate/polyethylene/polystyrene. The spatial distribution patterns of marine MPs are influenced mainly by anthropogenic activities and freshwater inflows (rivers and sewage outfalls). Pollution hotspots of MPs were identified in the Pearl River Estuary, which has a high population, gross domestic product, and river and wastewater discharge. Furthermore, the negative correlation between the abundance of MPs in seawater and salinity indicates that freshwater inflow carrying MPs to the sea is an important source of marine MPs pollution. It has been estimated that approximately 8320 billion MPs particles, weighing 274.55 tons, flow into the Shenzhen coast annually through river input. Based on the MPs polymer types and quantities, the ecological risk of MPs pollution in the Shenzhen coastal ecosystem is moderate and deserves further attention. These findings deepen the understanding of MPs pollution, sources, and ecological risks in the southern coastal region of China, and are helpful for employing effective management strategies to control marine MPs pollution.

Isolation of marine polyethylene (PE)-degrading bacteria and its potential degradation mechanisms

Microbial degradation of polyethylene (PE) offers a promising solution to plastic pollution in the marine environment, but research in this field is limited. In this study, we isolated a novel marine strain of Pseudalkalibacillus sp. MQ-1 that can degrade PE. Scanning electron microscopy and water contact angle results showed that MQ-1 could adhere to PE films and render them hydrophilic. Analyses using X-ray diffraction, fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy showed a decrease in relative crystallinity, the appearance of new functional groups and an increase in the oxygen-to‑carbon ratio of the PE films, making them more susceptible to degradation. The results of gel permeation chromatography and liquid chromatography-mass spectrometry indicated the depolymerization of the long PE chains, with the detection of an intermediate, decanediol. Furthermore, genome sequencing was employed to investigate the underlying mechanisms of PE degradation. The results of genome sequencing analysis identified the genes associated with PE degradation, including cytochrome P450, alcohol dehydrogenase, and aldehyde dehydrogenase involved in the oxidative reaction, monooxygenase related to ester bond formation, and esterase associated with ester bond cleavage. In addition, enzymes involved in fatty acid metabolism and intracellular transport have been identified, collectively providing insights into the metabolic pathway of PE degradation.

Vertical transfer of microplastics in nearshore water by cultured filter-feeding oysters

Microplastics (MPs) are widely distributed in the sea, but the vertical transfer of MPs by marine organisms in coastal area is still poorly understood. In this study, we used laser direct infrared (LDIR) spectroscopy to determine the number and characteristics of MPs deposited by cultured oyster Crassostrea gigas and further compared the differences between MPs of natural deposit and biodeposit in field environments. The amounts of MPs found in the biodeposit of cultured oysters were 3.54 times greater than that in the natural deposition. The polymer types of biodeposit MPs also differed from those of natural deposition. It was estimated that a single oyster can deposit 15.88 MPs per day, which is a figure much higher than the initial results, and hotspots of MPs deposition may be formed within the oyster aquaculture area. We used generalized linear mixed model (GLMM) to further infer the sources of MPs in sediments and found that distance to shore, cultured zone and urban center were important predictors of MPs abundance in sediments of aquaculture area. The above results suggest that cultured bivalves have an important capacity for MPs biodeposition and will further change the vertical distribution pattern of MPs in coastal environments.

Occurrence of microplastics in the Haima cold seep area of the South China Sea

The pollution of deep-sea microplastics has received increasing attention. As a special ecosystem in the deep sea, the cold seep area is of great significance for studying the distribution of microplastics in the deep sea. In this work, the distribution and characteristics of microplastics in seawater, sediments, and shellfish in the Haima cold seep area and the correlation between the characteristics of microplastics in different media and the type of media were studied. Microplastics were found in all three media. The abundance of microplastics in different samples from the Haima cold seep area ranged 1.8-3.8 items/L for the seawater, 11.47-96.8 items/kg (d.w.) for the surface sediments, and 0-5 items/individual (0-0.714 items/g) for the shellfish. The amount of microplastics ingested by shellfish varied among different species. The microplastics in these three media were mainly fibrous, dark-colored, small-sized rayon, polyethylene terephthalate (PET), and polyethylene (PE). In the correlation analysis of microplastic characteristics among the three media, it was found that the characteristics of microplastics in different media in the same area were closely related, and each pair of variables showed a significant positive correlation (P ≤ 0.05). The distinctive geographical conditions would accelerate the interchange of microplastics among various media. Principal component analysis showed that habitat contribute to microplastic feature differences in shellfish. Differences in correlation were observed between the characteristics of shellfish microplastics in different regions and the characteristics of microplastics in surrounding seawater and sediments.

Microplastic Contamination of a Benthic Ecosystem in a Hydrothermal Vent

Plastic contamination is a global pervasive issue, extending from coastal areas and open oceans to polar regions and even the deep sea. Microplastic (MP) contamination in hydrothermal vents, which are known for their high biodiversity even under extreme conditions, has remained largely unexplored. Here, we present, for the first time, MP pollution in a deep-sea hydrothermal vent at one of the biodiversity hotspots─the Central Indian Ridge. Not only the environment (seawater: 2.08 ± 1.04 MPs/L, surface sediments: 0.57 ± 0.19 MP/g) but also all six major benthic species investigated were polluted by MPs. MPs mainly consisted of polypropylene, polyethylene terephthalate, and polystyrene fragments ≤100 μm and were characterized as being either transparent or white in color. Remarkably, bioaccumulation and even biomagnification of microplastics were observed in the top predators of the ecosystem, such as squat lobsters (14.25 ± 4.65 MPs/individual) and vent crabs (14.00 ± 2.16 MPs/individual), since they contained more MPs than animals at lower trophic levels (e.g., mussels and snails, 1.75-6.00 average MPs/individuals). These findings reveal MP contamination of an ecosystem in a hydrothermal vent, thereby suggesting that their accumulation and magnification can occur in top-level animals, even within remote and extreme environments.

Are you drowned in microplastic pollution? A brief insight on the current knowledge for early career researchers developing novel remediation strategies

Microplastics (MPs) composed of different polymers with various shapes, within a vast granulometric distribution (1 μm - 5 mm) and with a wide variety of physicochemical surface and bulk characteristics spiral around the globe, with different atmospheric, oceanic, cryospheric, and terrestrial residence times, while interacting with other pollutants and biota. The challenges of microplastic pollution are related to the complex relationships between the microplastic generation mechanisms (physical, chemical, and biological), their physicochemical properties, their interactions with other pollutants and microorganisms, the changes in their properties with aging, and their small sizes that facilitate their diffusion and transportation between the air, water, land, and biota, thereby promoting their ubiquity. Early career researchers (ERCs) constitute an essential part of the scientific community committed to overcoming the challenges of microplastic pollution with their new ideas and innovative scientific perspectives for the development of remediation technologies. However, because of the enormous amount of scientific information available, it may be difficult for ERCs to determine the complexity of this environmental issue. This mini-review aims to provide a quick and updated overview of the essential insights of microplastic pollution to ERCs to help them acquire the background needed to develop highly innovative physical, chemical, and biological remediation technologies, as well as valorization proposals and environmental education and awareness campaigns. Moreover, the recommendations for the development of holistic microplastic pollution remediation strategies presented here can help ERCs propose technologies considering the environmental, social, and practical dimensions of microplastic pollution while fulfilling the current government policies to manage this plastic waste.

Accumulation characteristics and ecological risk evaluation of microplastics in sediment cores from the artificial reef area and surrounding seas of Haizhou Bay, north China

One significant "sink" for microplastic (MP) pollution is the sediments. There's a considerable lack of reliable data regarding the historical status of MPs contamination in sediments within marine ranching. In this research, the study area encompassed Haizhou bay marine ranching and adjacent seas. The primary objective was to explore the potential relationships between the accumulation of MPs and both the sample depth and sediment characteristics within the cores. The results unveiled significant contamination of MPs within the sediment cores. The average MPs concentration of sediment was 1.01 ± 1.28 n/g. Fibrous polymers and particles smaller than 1000 μm were frequently found in the sediment. The abundance of MPs exhibited a tendency to decrease with an increase in sediment depth. Artificial reefs and currents affected on MPs distribution in sediment cores. The accumulation of MPs showed a significant correlation (P < 0.05) with the sediment content of different particle sizes, suggesting that the composition of sediment can serve as an indicator of the abundance of MPs. The risk of MP pollution in the sediments of the study area was assessed by establishing a risk assessment model using concentration data of MPs and polymer types. Due to the higher hazard score of polymers (PA and PET) in MPs, the Polymer hazard index (PHI) was elevated to grade II. However, it had a Pollution load index (PLIzone) value of 1.95 (level I). This suggested that contamination was minimal, yet the ecological risk remained relatively high. The ecological risk assessment of MPs served as the foundation for gaining a detailed understanding of the distribution characteristics of MPs. It also furnished essential data support for conducting a comprehensive assessment, developing feasible management strategies, and establishing water quality standards related to plastic waste.

Changes in Flavor-Related Biomarkers in Pacific Oysters (Crassostrea gigas) Following Microplastic Exposure

Microplastics have been an emerging threat to filtering species and the ingestion and impacts of microplastics on oysters are a cause for concern. However, much remains unknown about the effects of microplastics on flavor-related biomarkers in oysters. Herein, a laboratory microplastic exposure with concentrations of 1, 10, and 100 mg/L for 15 days was performed to investigate the impacts of microplastics on the flavor parameters of oysters. Exposure to microplastics changed the odor characteristics of oysters. Microplastic exposure had minor effects on the fatty acid composition; however, significant alterations in free amino acids and nucleotides were observed under the 1 and 10 mg/L exposure groups, respectively. The overall results indicated 10 mg/L of microplastic exposure significantly increased the equivalent umami value of oysters. These findings stressed the effects of microplastics on oysters and would be an important reference for the assessment of the potential risks associated with microplastics in marine edible species.

Environmental and ecological risk of microplastics in the surface waters and gastrointestinal tract of skipjack tuna (Katsuwonus pelamis) around the Lakshadweep Islands, India

The presence of microplastics (MPs) in marine ecosystems is widespread and extensive. They have even reached the deepest parts of the ocean and polar regions. The number of articles on plastic pollution has increased in recent years, but few have investigated the MPs from oceanic islands which are biodiversity hotspots. We investigated the possible microplastic contamination their source and characteristics in surface waters off Kavaratti Island and in the gastrointestinal tract (GT) of skipjack tuna, Katsuwonus pelamis collected from Kavaratti Island of the Lakshadweep archipelago. A total of 424 MP particles were isolated from the surface water samples collected from off Kavaratti Island with an average abundance of 5 ± 1nos./L. A total of 117 MPs were recovered from the GT of skipjack tuna from 30 individual fishes. This points to a potential threat of MP contamination in seafood around the world since this species has a high value in local and international markets. Fiber and blue color were the most common microplastic morphotypes and colors encountered, respectively, both from surface water and GT of fish. Smaller MPs (0.01-1 mm) made up a greater portion of the recovered materials, and most of them were secondary MPs. Polyethylene and polypropylene were the most abundant polymers found in this study. The Pollution Load Index (1.3 ± 0.21) of the surface water and skipjack tuna (1 ± 0.7) indicates a minor ecological risk for the coral islands, while the Polymer Hazard Index highlights the ecological risk of polymers, even at low MP concentrations. This pioneer study sheds preliminary light on the abundance, properties, and environmental risks of MPs to this highly biodiverse ecosystem.

Distribution of microplastics in bathyal- to hadal-depth sediments and transport process along the deep-sea canyon and the Kuroshio Extension in the Northwest Pacific

Understanding microplastic (MP) behavior in oceans is crucial for reducing marine plastic pollution. However, the complex process underlying MP transportation to the deep seafloor remains unknown despite the deep sea being considered its major sink. We focused on MP distribution in Sagami Bay (adjacent to highly populated areas of Japan), the plate triple junction connected through the Sagami Trough, and the abyssal plain immediately below the Kuroshio Extension. We observed the highest number of MPs in the abyssal stations, more than previously reported. The polymer types and aspect ratio of MPs in the abyssal stations significantly differed from those in the bathyal/hadal stations. The study suggests that MPs accumulated in the open ocean surface layer sink to the abyssal plains immediately below it, while MPs from land sources accumulate in the bathyal depth and are transported to the hadal depth near the coast through turbidity currents along the submarine canyon.

Research progress on occurrence characteristics and source analysis of microfibers in the marine environment

Synthetic microfiber pollution is a growing concern in the marine environment. However, critical issues associated with microfiber origins in marine environments have not been resolved. Herein, the potential sources of marine microfibers are systematically reviewed. The obtained results indicate that surface runoffs are primary contributors that transport land-based microfibers to oceans, and the breakdown of larger fiber plastic waste due to weathering processes is also a notable secondary source of marine microfibers. Additionally, there are three main approaches for marine microplastic source apportionment, namely, anthropogenic source classification, statistical analysis, and numerical simulations based on the Lagrangian particle tracking method. These methods establish the connections between characteristics, transport pathways and sources of microplastics, which provides new insights to further conduct microfiber source apportionment. This study helps to better understand sources analysis and transport pathways of microfibers into oceans and presents a scientific basis to further control microfiber pollution in marine environments.

Effect of ultrasonication conditions on polyethylene microplastics sourced from landfills: A precursor study to establish guidelines for their extraction from environmental matrices

Establishing concentration of microplastics (MPs), designated as CMP, in aqueous, semi-solid and solid samples originating from unscientifically created landfills/dumpsites (UCLDs) and engineered landfills (ELFs) is of utmost importance to assess their impact on the geoenvironment. However, the accuracy of CMP will be guided by the extraction efficiency of MPs from these samples. The extraction of MPs from semi-solid and solid samples of UCLDs/ELFs would be cumbersome, mainly due to their trapping in solid aggregates (including organic matter). Such aggregates need to be dispersed to release the MPs, which can be achieved through the assistance of ultrasonication (US) in the presence of an appropriate dispersing agent. However, mere dispersion of solid aggregates during the US might not result in the complete release of MPs adhered (AMPs) to MPs native (NMPs) to these samples. This is because MPs would adhere to the surface of the adjacent ones due to various physical-mechanical-thermal-chemical processes that prevail in landfills. Hence, guidelines for US-assisted extraction of MPs should be developed by considering an approach that would ensure (i) cleaning of NMPs' surface and (ii) release of AMPs without damaging the former. This necessitates understanding the influence of US parameters such as energy applied (Eus), time (tus) and direct/indirect exposure of NMPs from landfills that would control CMP. In this context, the influence of above mentioned US parameters on the (i) surface cleaning of polyethylene NMPs and (ii) release of AMPs and their concentrations (CAMP) was investigated. It was observed that Eus equal to 500 kJ/L during the indirect method of US would result in surface cleaning of NMPs and complete release of AMPs without damaging the farmer's structure. The present work acts as a precursor study to establish the guidelines for the US-assisted extraction of MPs in environmental samples. Also, a generalized relationship between Eus and CAMP, which can be employed to study the impact of landfill type on the release of MPs during the US was developed.

Microplastics in the Taiwan Strait and adjacent sea: Spatial variations and lateral transport

This study investigates the distribution, structural properties, and potential impacts of oceanic processes on microplastics (MPs) in the Taiwan Strait (TWS) and surrounding seas. With an average of 174 particles/m3, the MP abundance in surface seawater ranged from 84 to 389 particles/m3. MP abundance ranged from 16 to 382 particles/kg in sediments, with a median of 121 particles/kg. Fragment and fiber were the two most frequently detected shapes. These MPs were found to be composed primarily of carbon and oxygen elements at 70-90% levels using energy-dispersive X-ray spectroscopy. Additionally, several examples had trace levels of metallic components. Black was the color that MPs saw the most often out of all the hues. The two main types of polymers are polyester and rayon, and their production is influenced by home sewage discharge and synthetic fiber production. The main routes of MP transport were land source input, riverine input, and oceanic currents. This study showed that salinity affects the distribution of MPs, with high-salinity seawater serving to saturate their presence. On the other hand, upwelling raises MP concentrations by bringing nutrients from the deep to the surface. Furthermore, it has been discovered that the dilution of the Pearl River plume increases the MP prevalence in the region. The South China Sea Warm Current had the highest lateral MPs transport flux (2.1 × 1014 particles/y), which was followed by the Taiwan Strait Current area (1.0 × 1014 particles/y) and the Guangdong coastal areas (8.6 × 1013 particles/y). In sediments, the MP prevalence was inversely correlated with particle size. Flocculation processes probably made it easier for MPs to travel down the water column and deposit themselves on the aquatic substrate. Although the relationship between MPs, total organic carbon, and total organic nitrogen was not correlated, a favorable trend showed that MPs may discreetly contribute to carbon storage in coastal sediment.

Microplastics in sediments from the southern Gulf of Mexico: Abundance, distribution, composition, and adhered pollutants

Approximately 23 Mt of plastics reaches the ocean each year, fragmented into microplastics (MP). MPs are widely dispersed in the sea, becoming deposited in sediments. MPs are considered carriers of pollutants such as heavy metals and polycyclic aromatic hydrocarbons and, when ingested by biota, pose a high health risk. This study determined metals and PAHs in sedimentary microplastics from the southern Gulf of Mexico (GOM). One hundred twenty-four sediment samples were collected, covering an area of 26,220 km². The mean (±SD) of MPs in sediments was 16.46 ± 17.76 MPs/kg. The most abundant polymers were cellophane (CE), polyvinylidene fluoride (PVDF), polyethylene (PE), polyamides (PA), and nylon (NYL). A strong correlation (r: 0.83) was found between MP density and sediment depth. PA and PE were found near shorelines and PVDF near oil platforms. Aluminum, arsenic, and tin had the highest concentration (89.6 ± 94.6, 23.1 ± 70.3, and 19 ± 29.2 μg g^-1, respectively), and acenaphthylene was the PAH with the highest concentration (3.4 ± 12.6 μg g^-1). This study shows that MP with a higher density is found at greater depths, and this research is one of the first to cover a large area of the Gulf of Mexico.

Impact of Particulate Pollution on Aquatic Invertebrates

A serious global problem, air pollution poses a risk to both human and environmental health. It contains hazardous material like heavy metals, nanoparticles, and others that can create an impact on both land and marine environments. Particulate pollutants, which can enter water systems through a variety of ways, including precipitation and industrial runoff, can have a particularly adverse influence on aquatic invertebrates. Once in the water, these particles can harm aquatic invertebrates physically, physiologically, and molecularly, resulting in developmental problems and multi-organ toxicity. Further research at the cellular and molecular levels in numerous locations of the world is necessary to completely understand the impacts of particle pollution on aquatic invertebrates. Understanding how particle pollution affects aquatic invertebrates is vital as the significance of ecotoxicological studies on particulate contaminants increases. This review gives a comprehensive overview of the current understanding of how particle pollution affects aquatic invertebrates.

Microplastics transport in a low-inflow estuary at the entrance of the Gulf of California

Microplastics (MPs) are recognized as a global emergent pollution impact, which can affect all food chains. Estimating MPs transport pathways in coastal ecosystems is needed to assess their likely effects. Here, we studied MPs accumulation and transport pathways in the Estero de Urias lagoon system (low-inflow estuary) using field data and a 3D particle model. Field results showed that the MPs present similar abundances throughout the study area during the dry and rainy seasons. Model simulations indicated that i) morphology and tidal currents caused the MPs discharged in the lagoon to remain inside, and ii) wind-induced currents caused the MPs in the coastal area to be transported to the southwest. These transport processes may be responsible for homogenizing MPs concentrations through the studied area. In addition, model simulations suggested that EUL-dense waters can export MPs from the coastal area to the sea bottom.

Microplastic abundance, distribution, and characterization in freshwater sediments in Iran: a case study in Kermanshah city

This paper focuses on abundance, distribution, and characteristics of microplastics (MPs) in freshwater sediments of Sarab Niloofar Lake, Kermanshah, Iran. After selecting an appropriate method for extraction of MPs, the characterization such as polymer types, surface morphology, and trace elements has been determined using Fourier transform infrared spectroscopy, scanning electron microscopic, and energy-dispersive X-ray spectroscopic analysis, respectively. The results highlighted that all sampling locations were contaminated by MP abundance ranged from 1733.33 to 4400 items kg^-1 d.w with an average of 2483.59 ± 805.30 items kg^-1 d.w. MPs with a size range of 0.025 to 1 mm (25-1000 μm) were the most frequently detected MPs in size (62%). Furthermore, the MPs found in this area mainly contain fiber (61%), fragment (19%), film (9%), foam (6%), and pallet (5%). The main color for detected MPs in sampling stations was black (51%) and followed by white/transparent (27%), red (11%), blue (7%), and yellow (4%). The results of polymer identification revealed that the polyethylene, polystyrene, polyurethane, and polypropylene were the principal polymers. This research work emphasized that various types of MPs have been distributed in freshwater sediments of Sarab Niloofar Lake, which is a first useful data for MPs in one the most important Kermanshah's tourist area.

Ecological disturbances and abundance of anthropogenic pollutants in the aquatic ecosystem: Critical review of impact assessment on the aquatic animals

Anthropogenic toxins are discharged into the environment and distributed through a variety of environmental matrices. Trace contaminant detection and analysis has advanced dramatically in recent decades, necessitating further specialized technique development. These pollutants can be mobile and persistent in small amounts in the environment, and ecological receptors will interact with it. Despite the fact that few researches have been undertaken on invertebrate exposure, accumulation, and biological implications, it is apparent that a wide range of pollutants can accumulate in the tissues of aquatic insects, earthworms, amphipod crustaceans, and mollusks. Due to long-term stability during long-distance transit, a number of chemical and microbiological agents that were not previously deemed pollutants have been found in various environmental compartments. The uptake of such pollutants by the aquatic organism is done through the process of bioaccumulation when dangerous compounds accumulate in living beings while biomagnification is the process of a pollutant becoming more hazardous as it moves up the trophic chain. Organic and metal pollution harms animals of every species studied so far, from bacteria to phyla in between. The environmental protection agency says these poisons harm humans as well as a variety of aquatic organisms when the water quality is sacrificed in typical wastewater treatment systems. Contrary to popular belief, treated effluents discharged into aquatic bodies contain considerable levels of Anthropogenic contaminants. This evolution necessitates a more robust and recent advancement in the field of remediation and their techniques to completely discharge the various organic and inorganic contaminants.

Deep Sea Microplastic Pollution Extends Out to Sediments in the Northeast Atlantic Ocean Margins

Microplastics are ubiquitous emerging contaminants found in every habitat surveyed, building upon international databases globally. Costs and accessibility often correlate to few deep sea sediment surveys, restricting the number of stations within a given sampling area. An extensive survey of the Porcupine Seabight, Porcupine Bank, the Goban Spur, and south-western canyons resulted in identifying microplastics in deep sea sediment surface layers from 33 of the 44 stations sampled (75%), with a total of 83 particles (74 synthetic and 9 natural) recorded. No microplastic hotspots were identified, and abundances (kg d.w.^-1) were not correlated with distance from land, depth, or the presence of macrolitter on the seafloor. Understanding the sources of deep sea microplastics, such as marine traffic, is crucial to developing effective mitigation strategies as well as further monitoring campaigns targeting microplastic pollution in areas with significant deep sea biodiversity such as the Porcupine Seabright.

Secondary microplastics formation and colonized microorganisms on the surface of conventional and degradable plastic granules during long-term UV aging in various environmental media

Recently, biodegradable plastics (BPs) as an alternative of conventional plastics have been widely advocated and applied. However, there is still a large research gap between the formation of secondary microplastics (MPs) and colonized microorganisms on their surface under long-term aging in different environments. In this study, the generation of secondary MPs and the formation of surface biofilms on the micro-sized (3-5 mm) biodegradable plastic poly (butyleneadipate-co-terephthalate) (BP-PBAT) and conventional plastic polyvinyl chloride (CP-PVC) under long-term UV aging was investigated. The results showed that hundreds and even thousands of MPs (185.53 ± 85.73 items/g - 1473.27 ± 143.67 items/g) were generated by BP-PBAT and CP-PVC after aged for 90 days, and the abundance of MPs produced by BP-PBAT was significantly higher than that of CP-PVC. Moreover, the α diversities and detected OTU number of biofilm communities formed on MPs increased with MPs-aging. The genes related to the formation of biofilms was significantly expressed on aged MPs and the genes related to human pathogens and diseases were also detected in enriching on MPs surface. Overall, BPs may lead to greater ecological risks as it releases thousands of secondary MPs after being aged, and their environmental behavior needs to be further explored.

Distribution pattern and influencing factors for the microplastics in continental shelf, slope, and deep-sea surface sediments from the South China Sea

Marine microplastic pollution has become a major global concern in recent years and the fate of microplastics in the ocean is a hot issue of research. We investigated microplastic pollution in surface sediments in the northern South China Sea to explore its distribution characteristics and influencing factors across the continental shelf, continental slope, and deep-sea environments. It was found that the microplastic abundance of surface sediments was 130.56 ± 40.48 items/kg. The average abundance of microplastics in all three topographic areas gradually decreased with increasing distance offshore. However, the differences in microplastic diversity indices between the three areas were not significant and were higher than those in other seas of the world, indicating that the waters of the northern South China Sea are rich in microplastics from complex sources, with more pollution input channels. In the continental shelf, fibrous and low density microplastics accounted for the largest amount, with a low degree of microplastic aging, and were mostly transported by suspended-load. These microplastics were mainly influenced by human activities. In the deep sea, microplastics with higher density were the most abundant and the number of fibrous microplastics was fewer, while the average size was larger, mainly influenced by the bottom currents. These microplastics underwent long-term bedload transport. In the continental slope, the main factors affecting the distribution of microplastics were more complex. In addition to pollution by human activities, the slope also receives microplastic materials carried by bottom currents; therefore, the composition of microplastics in the slope combines those characteristics of microplastics in both the continental shelf and deep-sea areas. The findings of this study indicate that the South China Sea is affected by complex pollution sources under the dual effects of human activities and natural conditions; in particular, the pollution situation in the deep-sea area needs extensive attention.

Plastics in the environment as potential threat to life: an overview

Plastics have become inevitable for human beings in their daily life. Million tons of plastic waste is entering in oceans, soil, freshwater, and sediments. Invasion of plastics in different ecosystems is causing severe problems to inhabitants. Wild animals such as seabirds, fishes, crustaceans, and other invertebrates are mostly effected by plastic entanglements and organic pollutants absorbed and carried by plastics/microplastics. Plastics can also be potentially harmful to human beings and other mammals. Keeping in view the possible harms of plastics, some mitigation strategies must be adopted which may include the use of bioplastics and some natural polymers such as squid-ring teeth protein. This review focuses on the possible sources of intrusion and fate of plastics in different ecosystems, their potential deleterious effects on wildlife, and the measures that can be taken to minimize and avoid the plastic use.

Seasonal heterogeneity and a link to precipitation in the release of microplastic during COVID-19 outbreak from the Greater Jakarta area to Jakarta Bay, Indonesia

To reduce microplastic contamination in the environment, we need to better understand its sources and transit, especially from land to sea. This study examines microplastic contamination in Jakarta's nine river outlets. Microplastics were found in all sampling intervals and areas, ranging from 4.29 to 23.49 particles m^-3. The trend of microplastic contamination tends to increase as the anthropogenic activity towards Jakarta Bay from the eastern side of the bay. Our study found a link between rainfall and the abundance of microplastic particles in all river outlets studied. This investigation found polyethylene, polystyrene, and polypropylene in large proportion due to their widespread use in normal daily life and industrial applications. Our research observed an increase in microplastic fibers made of polypropylene over time. We suspect a relationship between COVID-19 PPE waste and microplastic shift in our study area. More research is needed to establish how and where microplastics enter rivers.