A comprehensive review on algae removal and control by coagulation-based processes: mechanism, material, and application

Principles and research progress of physical prevention and control technologies for algae in eutrophic water

The abnormal reproduction of algae in water worldwide is prominent in the context of human interference and global climate change. This study first thoroughly analyzed the effects of physical factors, such as light, temperature, hydrodynamics, and operational strategies, on algal growth and their mechanisms. Physical control techniques are safe and have great potential for preventing abnormal algal blooms in the absence of chemical reagents. The focus was on the principles and possible engineering applications of physical shading, ultrasound, micro-current, and ultraviolet (UV) technologies, in controlling abnormal algal reproduction. Physical shading can inhibit or weaken photosynthesis in algae, thereby inhibiting their growth. Ultrasound mainly affects the physiological and biochemical activities of cells by destroying the cell walls, air cells, and active enzymes. Micro-currents destroy the algal cell structure through direct and indirect oxidation, leading to algal cell death. UV irradiation can damage DNA, causing organisms to be unable to reproduce or algal cells to die directly. This article comprehensively summarizes and analyzes the advantages of physical prevention and control technologies for the abnormal reproduction of algae, providing a scientific basis for future research. In the future, attempts will be made toward appropriately and comprehensively utilizing various physical technologies to control algal blooms. The establishment of an intelligent, comprehensive physical prevention and control system to achieve environmentally friendly, economical, and effective physical prevention and control of algae, such as the South-to-North Water Diversion Project in China, is of great importance for specific waters.

Moderate oxidation of algae-laden water: Principals and challenges

The occurrence of seasonal algae blooms represents a huge dilemma for water resource management and has garnered widespread attention. Therefore, finding methods to control algae pollution and improve water quality is urgently needed. Moderate oxidation has emerged as a feasible way of algae-laden water treatment and is an economical and prospective strategy for controlling algae and endogenous and exogenous pollutants. Despite this, a comprehensive understanding of algae-laden water treatment by moderate oxidation, particularly principles and summary of advanced strategies, as well as challenges in moderate oxidation application, is still lacking. This review outlines the properties and characterization of algae-laden water, which serve as a prerequisite for assessing the treatment efficiency of moderate oxidation. Biomass, cell viability, and organic matter are key components to assessing moderate oxidation performance. More importantly, the recent advancements in employing moderate oxidation as a treatment or pretreatment procedure were examined, and the suitability of different techniques was evaluated. Generally, moderate oxidation is more promising for improving the solid-liquid separation process by the reduction of cell surface charge (stability) and removal/degradation of the soluble algae secretions. Furthermore, this review presents an outlook on future research directions aimed at overcoming the challenges encountered by existing moderate oxidation technologies. This comprehensive examination aims to provide new and valuable insights into the moderate oxidation process.

Suitability of inorganic coagulants for algae-laden water treatment: Trade-off between algae removal and cell viability, aggregate properties and coagulant residue

Inorganic coagulants could effectively precipitate algae cells but might increase the potential risks of cell damage and coagulant residue. This study was conducted to critically investigate the suitability of polyaluminum (PAC), FeCl3 and TiCl4 for algae-laden water treatment in terms of the trade-off between algal substance removal, cell viability, and coagulant residue. The results showed that an appropriate increase in coagulant dosage contributed to better coagulation performance but severe cell damage and a higher risk of intracellular organic matter (IOM) release. TiCl4 was the most destructive, resulting in 60.85% of the algal cells presenting membrane damage after coagulation. Intense hydrolysis reaction of Ti salts was favorable for the formation of larger and more elongated, dendritic structured flocs than Al and Fe coagulants. TiCl4 exhibited the lowest residue level and remained in the effluents mainly in colloidal form. The study also identified charge neutralization, chemisorption, enmeshment, and complexation as the dominant mechanisms for algae water coagulation by metal coagulants. Overall, this study provides the trade-off analyses between maximizing algae substance removal and minimizing potential damage to cell integrity and is practically valuable to develop the most suitable and feasible technique for algae-laden water treatment.

Formation and toxicity alteration of halonitromethanes from Chlorella vulgaris during UV/chloramination process involving bromide ion

Frequent algal blooms cause algal cells and their algal organic matter (AOM) to become critical precursors of disinfection by-products (DBPs) during water treatment. The presence of bromide ion (Br-) in water has been demonstrated to affect the formation laws and species distribution of DBPs. However, few researchers have addressed the formation and toxicity alteration of halonitromethanes (HNMs) from algae during disinfection in the presence of Br-. Therefore, in this work, Chlorella vulgaris was selected as a representative algal precursor to investigate the formation and toxicity alteration of HNMs during UV/chloramination involving Br-. The results showed that the formation concentration of HNMs increased and then decreased during UV/chloramination. The intracellular organic matter of Chlorella vulgaris was more susceptible to form HNMs than the extracellular organic matter. When the Br-: Cl2 mass ratio was raised from 0.004 to 0.08, the peak of HNMs total concentration increased 33.99%, and the cytotoxicity index and genotoxicity index of HNMs increased 67.94% and 22.80%. Besides, the formation concentration and toxicity of HNMs increased with increasing Chlorella vulgaris concentration but decreased with increasing solution pH. Possible formation pathways of HNMs from Chlorella vulgaris during UV/chloramination involving Br- were proposed based on the alteration of nitrogen species and fluorescence spectrum analysis. Furthermore, the formation laws of HNMs from Chlorella vulgaris in real water samples were similar to those in deionized water samples. This study contributes to a better comprehension of HNMs formation from Chlorella vulgaris and provides valuable information for water managers to reduce hazards associated with the formation of HNMs.

Photocatalytic degradation of tetracycline using a novel WO3-ZnO/AC under visible light irradiation: Optimization of effective factors by RSM-CCD

Mitigating pharmaceutical pollution in the global environment is imperative, and tetracycline (TC) is a commonly utilized antibiotic in human and veterinary medicine. The persistent existence of TC highlights the necessity of establishing efficient measures to protect water systems and the environment from detrimental contaminants. Herein, a novel rhubarb seed waste-derived activated carbon-supported photocatalyst (WO3-ZnO/RUAC) was synthesized by combining wet impregnation and ultrasonic methods. The activated carbon (AC) was obtained from rhubarb seed waste for the first time via chemical activation. The function of AC as an electron acceptor and in separating electron-hole pairs was illuminated by characterization analyses that included XRD, FTIR, XPS, SEM, TEM, PL, EIS, TPC, and UV-DRS. Using the response surface methodology-central composite design (RSM-CCD) technique, the synthesis parameters of the composite were systematically optimized. Under ideal conditions, with a TC concentration of 33 mg. L-1, pH of 4.57, irradiation time of 108 min, and catalyst dose of 0.85 g. L-1, the highest degradation efficiency of TC by this composite, achieved 96.5%, and it was reusable for five cycles. Subsequently, trapping tests and electron spin resonance (ESR) analysis were conducted, elucidating that •OH and •O2- radicals played pivotal roles in the photocatalytic degradation of TC. This research offers valuable insights into utilizing the AC-based photocatalyst to degrade pharmaceutical micropollutants effectively.

Enhanced electrooxidation/electrocoagulation-ultrafiltration membrane process with S2O42- for saline algae-containing surface water treatment: Purification and membrane performance

The surface water in coastal areas involving algae, is often affected by saline and emerging contaminants caused by saltwater intrusion, and expanding aquaculture industry. Therefore, it is necessary to conduct studies to address the issues that affect ecological safety and health of aquatic environments. This study presents the development of an enhanced electrooxidation/electrocoagulation-ultrafiltration (EO/EC-UF) membrane process using S2O42- (DTN@EO/EC-UF) for the treatment of saline water containing algae. Our results have shown that significant removal of NH3-N (95.1 %), UV254 (89.4 %) and algae (75.7 %) was achieved with the addition of S2O42- (DTN). Additionally, an optimal DTN dosage of 40 mg/L was used in the DTN@EO/EC process to enhance water purification, utilizing reactive species such as SO4·- and ·OH. After coupling with the ultrafiltration (UF) process, optimal operating conditions (DTN: 40 mg/L, current density: 4.65 mA/cm2, electrolysis: 60 s) were applied to treat the saline algae-containing surface water. The generated free chlorine, including NHCl2, accounted for approximately 22 % (0.14 mg/L). In addition, DTN significantly improved the ceramic membrane's permeability and anti-fouling characteristics, with a maximum increasing specific flux from 0.76 to 0.93, mainly attributing to the reduced the irreversible fouling resistance. Furthermore, we discovered that common membrane cleaning using acid or base enhanced the DTN@EO/EC-UF process. In conclusion, this study established an innovative DTN@EO/EC-UF process with excellent performance in terms of water purification and membrane self-cleaning. The results provided a promising alternative for treating saline algae-containing surface water.

Coagulation as an effective method for cyanobacterial bloom control: A review

Eutrophication, the over-enrichment with nutrients, for example, nitrogen and phosphorus, of ponds, reservoirs and lakes, is an urgent water quality issue. The most notorious symptom of eutrophication is a massive proliferation of cyanobacteria, which cause aquatic organism death, impair ecosystem and harm human health. The method considered to be most effective to counteract eutrophication is to reduce external nutrient inputs. However, merely controlling external nutrient load is insufficient to mitigate eutrophication. Consequently, a rapid diminishing of cyanobacterial blooms is relied on in-lake intervention, which may encompass a great variety of different approaches. Coagulation/flocculation is the most used and important water purification unit. Since cyanobacterial cells generally carry negative charges, coagulants are added to water to neutralize the negative charges on the surface of cyanobacteria, causing them to destabilize and precipitate. Most of cyanobacteria and their metabolites can be removed simultaneously. However, when cyanobacterial density is high, sticky secretions distribute outside cells because of the small size of cyanobacteria. The sticky secretions are easily to form complex colloids with coagulants, making it difficult for cyanobacteria to destabilize and resulting in unsatisfactory treatment effects of coagulation on cyanobacteria. Therefore, various coagulants and coagulation methods were developed. In this paper, the focus is on the coagulation of cyanobacteria as a promising tool to manage eutrophication. Basic principles, applications, pros and cons of chemical, physical and biological coagulation are reviewed. In addition, the application of coagulation in water treatment is discussed. It is the aim of this review article to provide a significant reference for large-scale governance of cyanobacterial blooms. PRACTITIONER POINTS: Flocculation was a promising tool for controlling cyanobacteria blooms. Basic principles of four kinds of flocculation methods were elucidated. Flocculant was important in the flocculation process.

Is monochloramine pre-oxidation a viable strategy for enhancing the treatment efficiency of algae-laden water with conventional drinking water treatment process?

Algal blooms worldwide pose many challenges to drinking water production. Pre-oxidation with NaClO, KMnO4, or ozone is commonly used to enhance algal removal in conventional drinking water treatment processes. However, these currently utilized oxidation methods often result in significant algal cell lysis or impede the operation of the subsequent units. Higher algal removal with pre-chlorination in algal solutions prepared with natural water, compared to those prepared with ultrapure water, has been observed. In the present studies, preliminary findings indicate that ammonium in natural water alters chlorine species to NH2Cl, leading to improved treatment efficiency. NH2Cl with 1.5-3.0 mg∙L-1 as Cl2 with an oxidation time of 3-7 h significantly enhancing algal removal by coagulation. The selective oxidation of surface-absorbed organic matter (S-AOM) by NH2Cl, followed by the subsequent peeling off of this material from the algal surface, leading to an increase in zeta potential from -20.2 mV to -3.8 mV, constitutes the primary mechanism of enhanced algal removal through coagulation. These peeled S-AOM retained their large molecular weight and acted as polymer aids. Compared with NaClO and KMnO4, NH2Cl displays the best performance in improving algal removal, avoiding cell lysis, and decreasing the potential for nitrogenous disinfection byproducts formation under the reaction conditions used in this study. Notably, in major Chinese cities, water purification plants commonly rely on suburban lakes or reservoirs as water sources, necessitating the transportation of raw water over long distances for times up to several hours. These conditions favor the implementation of NH2Cl pre-oxidation. The collective results indicate the potential of NH2Cl oxidation as a viable pretreatment strategy for algal contamination during water treatment processes.

Periodic Addition of Glucose Suppressed Cyanobacterial Abundance in Additive Lake Water Samples during the Entire Bloom Season

Previously, we showed that prophylactic addition of glucose to Harsha Lake water samples could inhibit cyanobacteria growth, at least for a short period of time. The current study tested cyanobacterial control with glucose for the entire Harsha Lake bloom season. Water samples (1000 ml) were collected weekly from Harsha Lake during the algal-bloom season starting June 9 and lasting until August 24, 2022. To each of two 7-liter polypropylene containers, 500 ml of Harsha Lake water was added, and the containers were placed in a controlled environment chamber. To one container labeled "Treated," 0.15 g of glucose was added, and nothing was added to the container labeled "Control." After that, three 25 ml samples from each container were collected and used for 16S rRNA gene sequencing each week. Then 1000 ml of Harsha Lake water was newly collected each week, with 500 ml added to each container, along with the addition of 0.15 g glucose to the "Treated" container. Sequencing data were used to examine differences in the composition of bacterial communities between Treated and Control containers. Treatment with glucose altered the microbial communities by 1) reducing taxonomic diversity, 2) largely eliminating cyanobacterial taxa, and 3) increasing the relative abundance of subsets of non-cyanobacterial taxa (such as Proteobacteria and Actinobacteriota). These effects were observed across time despite weekly inputs derived directly from Lake water. The addition of glucose to a container receiving weekly additions of Lake water suppressed the cyanobacterial populations during the entire summer bloom season. The glucose appears to stimulate the diversity of certain bacterial taxa at the expense of the cyanobacteria.

Insight into coagulation/flocculation mechanisms on microalgae harvesting by ferric chloride and polyacrylamide in different growth phases

FeCl3 and polyacrylamide (PAM) had been used to investigate the effect of coagulation, flocculation, and their combination on algae cells and extracellular organic matter (EOM) at different phases. PAM tended to aggregate particle-like substances, while FeCl3 could interact with EOM. The content of EOM kept rising during the algae growth cycle, while OD680 peaked at about 3.0. At stationary phase Ⅰ, the removal efficiencies of UV254, turbidity and OD680 of the suspension conditioned with FeCl3 + PAM reached (88.08 ± 0.89)%, (89.72 ± 0.36)% and (93.99 ± 0.05)%, respectively. Nevertheless, PAM + FeCl3 exhibited the worst efficiency because of the release of EOM caused by the turbulence. The results suggested that algal cells served as a coagulation aid to facilitate floc formation, while excessive EOM deteriorated harvesting performance. The process of FeCl3 + PAM at stationary phase Ⅰ appears to be a promising technology for microalgae harvesting.

Using Spirulina platensis as a natural biocoagulant for polystyrene removal from aqueous medium: performance, optimization, and modeling

Microplastics (MPs) are newly recognized contaminants that result from the breakdown of plastics released into aquatic environments. This study focuses on the elimination of polystyrene (PS) using S. platensis, a natural biocoagulant, from aqueous solutions. The research investigated several crucial variables, including the initial level of PS ranging from 100 to 900 mg L-1, pH levels from 4 to 10, the contact time of 20-40 min, and doses of S. platensis ranging from 50 to 250 mg L-1. The analysis of the data revealed that the quadratic model offered the best fit for the experimental results. In the present study, we utilized S. platensis as a novel natural biocoagulant to effectively eliminate PS from aqueous solutions. Process optimization was performed using a Box-Behnken design (BBD). The best-fitting model for the data was the quadratic model. The results displayed that the highest elimination of PS (81%) was occurred at a pH of 4, with a contact time of 30 min, a dose of S. platensis at 250 mg L-1, and a PS concentration of 500 mg L-1. These findings show that S. platensis has a significant effect on removing PS from the aquatic environment. Algae can serve as a convenient and eco-friendly method, replacing chemical coagulants, to effectively remove MPs from the aquatic environment.

Advanced oxidation processes for synchronizing harmful microcystis blooms control with algal metabolites removal: From the laboratory to practical applications

Harmful algal blooms (HABs) in freshwater systems have become a global epidemic, leading to a series of problems related to cyanobacterial outbreaks and toxicity. Studies are needed to improve the technology used for the simultaneous removal of harmful cyanobacteria and algal metabolites. In this review, widely reported advanced oxidation processes (AOPs) strategies for removing major species Microcystis aeruginosa (M. aeruginosa) and microcystins (MCs) were screened through bibliometrics, such as photocatalysis, activated persulfate, H2O2, Ozone oxidation, ultrasonic oxidation, and electrochemical oxidation, etc. AOPs generate kinds of reactive oxygen species (ROS) to inactivate cyanobacteria and degrade cyanotoxins. A series of responses occurs in algal cells to resist the damaging effects of ROS generated by AOPs. Specifically, we reviewed laboratory research, mechanisms, practical applications, and challenges of HABs treatments in AOPs. Problems common to these technologies include the impact of algal response and metabolites, and environmental factors. This information provides guidance for future research on the removal of harmful cyanobacteria and treatment of algal metabolites using AOPs.

The characteristics of H6 against Microcystis aeruginosa

Algal bloom caused by Microcystis aeruginosa has always been the focus of attention; microbial algal control has the advantages of significant effect, low investment cost, and environmental friendliness; the use of microbial technology to inhibit the bloom has a broad prospect for development. In this study, a strain of Enterobacterium algicidal bacteria screened from a river was used to study the algicidal characteristics against Microcystis aeruginosa using SEM, 3-D EEM and zeta potential. The results showed that the optimal dosage (v/v) of the strain was 5% and the removal rate of algal cells was 70% after 7 days. When the algal density was OD680nm = 0.3, the removal rate of algal cells reached 83% after 7 days. In the pH range of 5 ~ 11, the removal rate of algal cells was 70 ~ 80% after 7 days. Algicidal bacteria H6 is mainly indirect algae lysis and is supplemented by direct algae lysis. Algicidal bacteria H6 removes algicidal substances by secreting high temperature resistant algicidal substances and algicidal products are humic acids. Algicidal bacterium H6 was a strain of Enterobacterium with good algicidal effect in a wide pH range, which enriched the bacterial resources in the control of cyanobacteria bloom in water. The high temperature resistance of the algae-soluble substance secreted by the algae-soluble substance provided convenience for the subsequent preparation and application of bacterial powder.

Magnetic coagulation and flocculation of kaolin suspension using Fe3O4 with plant polyphenol self-assembled flocculants

In this work, magnetic flocculant (Fe3O4@PP) was synthesized using plant polyphenol (PP) as a shaping ligand via in situ self-assembly. Characterization results revealed that Fe3O4@PP exhibited uniform particle size and excellent dispersibility with PP coating amount of 16.4 %. Experimental results suggested that Fe3O4@PP showed excellent turbidity removal efficiency in a wide pH range (3.0-10) and initial turbidity range (50-2000 NTU). Under the optimal conditions, Fe3O4@PP achieved 95.2 % of turbidity removal for simulated kaolin suspension and 96.9 % for actual wastewater. Fe3O4@PP exhibited excellent recycling and reusability properties, with high recycling efficiency of 93.3 % even after the fifth cycle. Microscopic observation revealed the formation process of magnetic flocs, involving particle aggregation, chain and cluster formation, and dense network aggregate formation. The structural characteristics and size of magnetic flocs were found to be significantly influenced by the combined effects of magnetic force, electric charge, van der Waals force, and functional groups on the surface of PP. The extended Deryaguin-Landau-Verwey-Overbeek models indicated that magnetic interactions were the primary mechanism for magnetic flocculation, accompanied by charge neutralization, adsorption bridging, sweeping, and net trapping.

Exploring the ignored role of escaped algae in a pilot-scale DWDS: Disinfectant consumption, DBP yield and risk formation

Insufficient treatments during bloom-forming seasons allow algae to enter the subsequent drinking water distribution system (DWDS). Yet, scarce information is available regarding the role escaped algae to play in the DWDS, and how they interact with the system. Thus, three scenarios were conducted: a pilot DWDS with algae (a), pipe water (b), and pipe water with algae (c). Experimental results showed that, compared to biofilm and bulk water, escaped algae required fewer disinfectants. Competition for disinfectants varied with algal strains (Microcystis aeruginosa, MA; Pseudanabaena sp., PS) and disinfectant types (chlorine, Cl2; chloriamine, NH2Cl). Algae in the MA-Cl2 group showed the highest demand (6.25%-36.02%). However, the low-concentration disinfectants distributed to algae could trigger distinct algal status alternations. Cl2 diffused into intact MA cells and reacted with intracellular compositions. Damaged PS cells reached 100% within 2 h. Typical disinfection byproducts (DBPs), including trihalomethanes (THMs), haloacetic acids and halogenated acetonitriles were examined. Disinfectant types and algal strains affected DBP yield and distribution. Although disinfectants consumed by algae might not promote dissolved DBP formation, especially for THMs. DBP formation of the other components was affected by escaped algae via changing disinfectant assignment (reduced by 45.45% for MA-Cl2) and transformation efficiency (by 34.52%). The cytotoxicity risks were estimated. Dissolved DBP-induced risks were not added when escaped algae occurred, whereas disruption and release of intracellular substances increased risks; the maximum cytotoxicity did not occur at 12 h rather than at the end (24 h). Overall, this study provided an innovative perspective on algal-related water quality issues in water systems.

Reinvestigation on the Mechanism for Algae Inactivation by the Ultraviolet/Peracetic Acid Process: Role of Reactive Species and Performance in Natural Water

This study provided an in-depth understanding of enhanced algae inactivation by combining ultraviolet and peracetic acid (UV/PAA) and selecting Microcystis aeruginosa as the target algae species. The electron paramagnetic resonance (EPR) tests and scavenging experiments provided direct evidence on the formed reactive species (RSs) and indicated the dominant role of RSs including singlet oxygen (1O2) and hydroxyl (HO•) and organic (RO•) radicals in algae inactivation. Based on the algae inactivation kinetic model and the determined steady-state concentration of RSs, the contribution of RSs was quantitatively assessed with the second-order rate constants for the inactivation of algae by HO•, RO•, and 1O2 of 2.67 × 109, 3.44 × 1010, and 1.72 × 109 M-1 s-1, respectively. Afterward, the coexisting bi/carbonate, acting as a shuttle, that promotes the transformation from HO• to RO• was evidenced to account for the better performance of the UV/PAA system in algae inactivation under the natural water background. Subsequently, along with the evaluation of the UV/PAA preoxidation to modify coagulation-sedimentation, the possible application of the UV/PAA process for algae removal was advanced.

Designing a cercosporin-bioinspired bifunctional algicide with flocculation and photocatalysis for efficiently controlling harmful cyanobacterial blooms

Harmful cyanobacterial blooms (HCBs) are spreading in freshwater ecosystems worldwide, adversely affecting drinking water supplies, aquatic production, recreational and tourism activities. Therefore, the efficient and environmentally friendly method is still of interest to be developed to effectively control HCBs. Inspired by the excellent algicidal activity of cercosporin (CP), a novel metal-free algaecide SiO2@EDU@CP (EDU, N-ethyl-N'-(3-dimethylaminopropyl)urea) with flocculation and photoremoval functions, was successfully designed and prepared in one-step to simultaneously introduce CP and EDU on SiO2 nanoparticles. It could rapidly form algae flocs in 20 min with 97.1% flocculation rate, and remove Microcystis aeruginosa within 12 h with 91.0% algicidal rate under 23 W compact fluorescent light irradiation without any leaked CP detected. Additionally, odorant β-cyclocitral and toxin microcystin-LR were both photodegraded after treatment of SiO2@EDU@CP. Further mechanistic studies showed that the introduction of EDU significantly reversed the zeta potential of SiO2-COOH to achieve the flocculation through neutral charge, and the photophysical characterization of SiO2@EDU@CP revealed the improved charge separation ability to generate reactive oxygen species. More importantly, the utility of SiO2@EDU@CP was well demonstrated by its effectiveness for algae from Taihu Lake under natural sunlight and inability to regrow after treatment. This study not only establishes a bifunctional algicide SiO2@EDU@CP to efficiently control HCBs, but also provides design possibilities to develop more novel and efficient algicides for the better control of practical HCBs.

Nanoparticles, an Emerging Control Method for Harmful Algal Blooms: Current Technologies, Challenges, and Perspectives

Harmful algal blooms (HABs) are a global concern because they harm aquatic ecosystems and pose a risk to human health. Various physical, chemical, and biological approaches have been explored to control HABs. However, these methods have limitations in terms of cost, environmental impact, and effectiveness, particularly for large water bodies. Recently, the use of nanoparticles has emerged as a promising strategy for controlling HABs. Briefly, nanoparticles can act as anti-algae agents via several mechanisms, including photocatalysis, flocculation, oxidation, adsorption, and nutrient recovery. Compared with traditional methods, nanoparticle-based approaches offer advantages in terms of environmental friendliness, effectiveness, and specificity. However, the challenges and risks associated with nanoparticles, such as their toxicity and ecological impact, must be considered. In this review, we summarize recent research progress concerning the use of nanoparticles to control HABs, compare the advantages and disadvantages of different types of nanoparticles, discuss the factors influencing their effectiveness and environmental impact, and suggest future directions for research and development in this field. Additionally, we explore the causes of algal blooms, their harmful effects, and various treatment methods, including restricting eutrophication, biological control, and disrupting living conditions. The potential of photocatalysis for generating reactive oxygen species and nutrient control methods using nanomaterials are also discussed in detail. Moreover, the application of flocculants/coagulants for algal removal is highlighted, along with the challenges and potential solutions associated with their use. This comprehensive overview aims to contribute to the development of efficient and sustainable strategies for controlling HAB control.

The effect of the combined system of hydrodynamic cavitation, ozone, and hydrogen peroxide on chlorophyll a and organic substances removal in the raw water

Increased levels of nutrients and algae can cause drinking water problems in communities. Harmful algal blooms affect humans, fish, marine mammals, birds, and other animals. In the present study, we investigated the use of a combined system [Hydrodynamic Cavitation, Ozone (O₃), and Hydrogen Peroxide (H₂O₂)] on the removal of Chlorophyll a and Organic substances in the raw water was investigated. The Effect of different operating conditions such as pH, cavitation time, pressure, distance, flow rate, ozone dose, and hydrogen peroxide concentration was studied. Utilizing the Taguchi design method, experiments were planned and optimized. The combined system treatment yielded a maximum reduction in Chlorophyll a and Total Organic Carbon (TOC) at an optimum condition of pH 5, cavitation pressure 5 bar, flow rate of 1 m³/h, a distance of 25 cm from the orifice plate, O₃ 3 g/h and 2 g/l of H₂O₂ concentrations. The most efficient factor in the degradation of TOC and Chlorophyll a, was cavitation pressure based on the percentage contributions of each parameter (38.64 percent and 35.05 percent, respectively). H₂O₂ was found to have the most negligible impact on degradation efficiency (4.24 percent and 4.11 percent, respectively).

Comparison of peracetic acid and sodium hypochlorite enhanced Fe(Ⅱ) coagulation on algae-laden water treatment

In this study, Fe(Ⅱ)/peracetic acid (PAA) and Fe(Ⅱ)/sodium hypochlorite (NaClO) systems were applied as the combined preoxidation and coagulation process to enhance algae removal. A high removal rate of algae and turbidity could be achieved, with most algal cells keeping intact when adding reasonable concentrations of PAA and NaClO to enhance Fe(Ⅱ) coagulation. The variations of chlorophyll a, malondialdehyde, and intracellular reactive oxygen species suggested that moderate oxidation with only destroying surface-adsorbed organic matter rather than cell integrity was realized. The generated organic radicals, Fe(Ⅳ), and hydroxy radical played the major roles in the Fe(Ⅱ)/PAA system for the moderate oxidation of algal cells, but direct oxidation by NaClO rather than producing reactive species in the Fe(Ⅱ)/NaClO process contributed to the preoxidation. Concurrently, the in-situ formed Fe(Ⅲ) greatly promoted the agglomerating and settling of algae. The analysis of cell integrity, biochemical compositions, and fluorescence excitation-emission matrices spectra demonstrated that excess NaClO but not PAA would seriously damage the algal cells. This might be because that NaClO would directly oxidize the cell wall/membrane, while PAA mainly permeates into the cell to inactivate algae. These results suggest that Fe(Ⅱ)/PAA is an efficient strategy for algae-laden water treatment without serious algae lysis.

A comprehensive review on the photocatalytic inactivation of Microcystis aeruginosa: Performance, development, and mechanisms

Harmful algae blooms (HABs), caused by severe eutrophication and extreme weather, have spread all over the world, posing adverse effects on eco-environment and human health. Microcystis aeruginosa is the dominant harmful cyanobacterial species when HABs occur, and the toxic metabolites produced by it, microcystins, are even fatal to humans. Photocatalytic technology has received wide attention from researchers for its clean and energy-efficient features, while the basic mechanisms and modification methods of photocatalysts have also been widely reported. In recent years, photocatalytic technology has shown great promise in the inhibition of HABs. In this article, we systematically reviewed the progress in photocatalytic performance and algae removal efficiency, discuss the damage mechanisms of photocatalysts for algae removal, including physical damage and various oxidative stresses, and also explore the degradation rates and possible pathways of microcystins. It can be concluded that during the photocatalytic process, the cytoarchitectural integrity of algae cells was damaged, a variety of important protein and enzyme systems were disrupted, and the antioxidant systems collapsed due to the continuous attack of ROS, which adversely affected the normal physiological activities and growth, resulting in the inactivation of algae cells. Moreover, photocatalysts have a degrading effect on microcystins, thus reducing the adverse effects of HAB. Finally, a brief summary of future research priorities regarding the photocatalytic degradation of algae cells is presented. This study helps to enhance the understanding of the destruction mechanism of Microcystis aeruginosa during the photocatalytic process, and provides a reference for the photodegradation of HAB in water bodies.

Research progress on influencing factors on compost maturity and cyanobacteria toxin degradation during aerobic cyanobacteria composting: a review

Cyanobacterial bloom is by far one of the most common water quality hazards. As cyanobacteria are rich in nitrogen, phosphorus, and other organic matter, the potential for beneficial use of cyanobacteria is promising. Aerobic composting is currently a hot topic of research in cyanobacteria treatment, which can effectively achieve reduction, recycling, and removal of the harmful impact of cyanobacteria. In this review, the characteristics of cyanobacteria in aerobic composting processes, the effects of physical, chemical, and biological factors on the composting process, and the degradation of microcystic toxins were systematically discussed and summarized. This review epitomizes the large quantities of research data collected by many scholars around the world to address the characteristics of "one low and five highs" in the aerobic cyanobacterial composting process. The composting techniques developed are effective and easy to adopt in the real world, such as adjusting the substrate C/N ratio and moisture content and use of chemical and biological additives to achieve reduction, recycling, and detoxication of the cyanobacterial wastes. The aim of this comprehensive review is to provide theoretical guidance and reference for further development and application of aerobic cyanobacteria composting technology.